Archive for date: November 29th, 2014

22. MISCELLANEOUS MATERIALS

건설자재 시험 및 인증 관련 규격목록 22

22. MISCELLANEOUS MATERIALS

22-1)        ANSI A108.10-2009 ; Installation of Grout in Tilework;

22-2)        ANSI A108.1-2009 ; Specification for the Installation of Ceramic Tile with Portland Cement Mortar;

22-3)        ANSI A108.4-2009 ; Installation of Ceramic Tile with Organic Adhesives or Water Cleanable Tile Setting Epoxy Adhesive;

22-4)        ANSI A108.5-2009 ; Installation of Ceramic Tile with Dry-Set Portland Cement Mortar or Latex-Portland Cement Mortar;

22-5)        ANSI A108.6-2009 ; Installation of Ceramic Tile with Chemical Resistant, Water Cleanable Tile Setting and Grouting Epoxy;

22-6)        ANSI A108.7-2009 ; Specification for Electrically Conductive Ceramic Tile Installed with Conductive Dry-Set Portland Cement Mortar;

22-7)        ANSI A108.8-2009 ; Installation of Ceramic Tile with Chemical Resistant Furan Mortar and Grout;

22-8)        ANSI A108.9-2009 ; Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout;

22-9)        ANSI A118.1-2009 ; Specification for Dry-Set Portland Cement Mortar;

22-10)      ANSI A118.2-2009 ; Specifications for Conductive Dry-set Portland Cement Mortar;

22-11)      ANSI A118.3-2009 ; Specifications for Chemical Resistant Water Cleanable Tile Setting and Grouting Epoxy and Water Cleanable Tile Setting Epoxy Adhesive;

22-12)      ANSI A118.4-2009 ; Specifications Furan Latex – Portland Cement Mortar;

22-13)      ANSI A118.5-2009 ; Specifications for Chemical Resistant Furan;

22-14)      ANSI A118.6-2009 ; Specifications for Ceramic Tile Grouts;

22-15)      ANSI A118.8-2009 ; Specifications for Modified Epoxy Emulsion Mortar/Grout;

22-16)      ANSI A136.1-2009 ; Organic Adhesives for Installation of Ceramic Tile;

22-17)      ANSI A137.1-2008 ; Specification for Ceramic Tile;

22-18)      ANSI A137.1-2008 ; Specifications for Ceramic Tile;

22-19)      ANSI Z 97.1-2009 ; Safety Performance Specifications and Methods of Tests for Transport Safety Glazing Materials Used in Building;

22-20)      ASTM A116 – 05 ASTM A121 – 07 ; Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

22-21)      ASTM A121 – 07 ; Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

22-22)      ASTM A368 – 95a(2009) ; Standard Specification for Stainless Steel Wire Strand

22-23)      ASTM A392 – 07 ; Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

22-24)      ASTM A475 – 03(2009)e1 ; Standard Specification for Zinc-Coated Steel Wire Strand

22-25)      ASTM A492 – 95(2009) ; Standard Specification for Stainless Steel Rope Wire

22-26)      ASTM A510 – 08 ; Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel

22-27)      ASTM A586 – 04a(2009)e1 ; Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

22-28)      ASTM A603 – 98(2009)e1 ; Standard Specification for Zinc-Coated Steel Structural Wire Rope

22-29)      ASTM A817 – 07 ; Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

22-30)      ASTM A824 – 01(2007) ; Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

22-31)      ASTM C1014 – 08 ; Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation

22-32)      ASTM C1029 – 09 ; Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

22-33)      ASTM C1036 – 06 ; Standard Specification for Flat Glass

22-34)      ASTM C1048 – 04 ; Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass

22-35)      ASTM C1071 – 05e1 ; Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

22-36)      ASTM C1193 – 09 ; Standard Guide for Use of Joint Sealants

22-37)      ASTM C1193 – 09 ; Standard Guide for Use of Joint Sealants

22-38)      ASTM C126 – 09 ; Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

22-39)      ASTM C126 – 09 ; Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

22-40)      ASTM C1363 – 05 ; Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

22-41)      ASTM C167 – 09 ; Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

22-42)      ASTM C177 – 04 ; Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

22-43)      ASTM C195 – 07 ; Standard Specification for Mineral Fiber Thermal Insulating Cement

22-44)      ASTM C196 – 00(2005) ; Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement

22-45)      ASTM C208 – 08a ; Standard Specification for Cellulosic Fiber Insulating Board

22-46)      ASTM C209 – 07ae1 ; Standard Test Methods for Cellulosic Fiber Insulating Board

22-47)      ASTM C240 – 08e1 ; Standard Test Methods of Testing Cellular Glass Insulation Block

22-48)      ASTM C335 – 05ae1 ; Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

22-49)      ASTM C411 – 05 ; Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

22-50)      ASTM C449 – 07 ; Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

22-51)      ASTM C509 – 06 ; Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

22-52)      ASTM C516 – 08 ; Standard Specification for Vermiculite Loose Fill Thermal Insulation

22-53)      ASTM C518 – 04 ; Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

22-54)      ASTM C520 – 04 ; Standard Test Methods for Density of Granular Loose Fill Insulations

22-55)      ASTM C533 – 09 ; Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

22-56)      ASTM C534 / C534M – 08 ; Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

22-57)      ASTM C542 – 05 ; Standard Specification for Lock-Strip Gaskets

22-58)      ASTM C547 – 07e1 ; Standard Specification for Mineral Fiber Pipe Insulation

22-59)      ASTM C549 – 06 ; Standard Specification for Perlite Loose Fill Insulation

22-60)      ASTM C552 – 07 ; Standard Specification for Cellular Glass Thermal Insulation

22-61)      ASTM C553 – 08 ; Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

22-62)      ASTM C564 – 09a ; Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

22-63)      ASTM C578 – 09e1 ; Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

22-64)      ASTM C591 – 09 ; Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

22-65)      ASTM C592 – 08a ; Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

22-66)      ASTM C610 – 09e1 ; Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

22-67)      ASTM C612 – 09 ; Standard Specification for Mineral Fiber Block and Board Thermal Insulation

22-68)      ASTM C665 – 06 ; Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

22-69)      ASTM C716 – 06 ; Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

22-70)      ASTM C719 – 93(2005) ; Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

22-71)      ASTM C726 – 05e1 ; Standard Specification for Mineral Fiber Roof Insulation Board

22-72)      ASTM C728 – 05(2010) ; Standard Specification for Perlite Thermal Insulation Board

22-73)      ASTM C739 – 08 ; Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

22-74)      ASTM C764 – 07 ; Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

22-75)      ASTM C794 – 06 ; Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

22-76)      ASTM C834 – 10 ; Standard Specification for Latex Sealants

22-77)      ASTM C864 – 05 ; Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

22-78)      ASTM C916 – 85(2007) ; Standard Specification for Adhesives for Duct Thermal Insulation

22-79)      ASTM C919 – 08 ; Standard Practice for Use of Sealants in Acoustical Applications

22-80)      ASTM C920 – 08 ; Standard Specification for Elastomeric Joint Sealants

22-81)      ASTM C991 – 08e1 ; Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

22-82)      ASTM D1003 – 07e1 ; Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

22-83)      ASTM D1044 – 08 ; Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

22-84)      ASTM D1204 – 08 ; Standard Test Method for Linear Dimensional Changes of Nonrigid

22-85)      ASTM D1327 – 04 ; Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing

22-86)      ASTM D146 – 04 ; Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

22-87)      ASTM D1593 – 09 ; Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

22-88)      ASTM D1668 – 97a(2006) ; Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing

22-89)      ASTM D173 – 03 ; Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing

22-90)      ASTM D2103 – 08 ; Standard Specification for Polyethylene Film and Sheeting

22-91)      ASTM D2126 – 09 ; Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

22-92)      ASTM D2178 – 04 ; Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

22-93)      ASTM D226 / D226M – 09 ; Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

22-94)      ASTM D227 – 03 ; Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

22-95)      ASTM D25 – 99(2005) ; Standard Specification for Round Timber Piles

22-96)      ASTM D2626 – 04 ; Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

22-97)      ASTM D2628 – 91(2005) ; Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

22-98)      ASTM D2842 – 06 ; Standard Test Method for Water Absorption of Rigid Cellular Plastics

22-99)      ASTM D2843 – 10 ; Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

22-100)    ASTM D3294 – 09 ; Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes

22-101)    ASTM D3406 – 95(2006) ; Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements

22-102)    ASTM D3468 – 99(2006)e1 ; Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

22-103)    ASTM D3667 – 05 ; Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors

22-104)    ASTM D3678 – 97(2008)e1 ; Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions

22-105)    ASTM D3679 – 09a ; Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

22-106)    ASTM D3771 – 03(2007) ; Standard Specification for Rubber Seals Used in Concentrating Solar Collectors

22-107)    ASTM D3832 – 79(2006) ; Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems

22-108)    ASTM D3841 – 97(2008)e1 ; Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

22-109)    ASTM D41 – 05 ; Standard Specification for Asphalt Primer Used in Roofing, Damp proofing, and Waterproofing

22-110)     ASTM D43 – 00(2006) ; Standard Specification for Coal Tar Primer Used in Roofing, Damp proofing, and Waterproofing

22-111)     ASTM D449 – 03(2008) ; Standard Specification for Asphalt Used in Damp proofing and Waterproofing

22-112)     ASTM D450 – 07 ; Standard Specification for Coal-Tar Pitch Used in Roofing, Damp proofing, and Waterproofing

22-113)     ASTM D4802 – 02 ; Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

22-114)     ASTM D543 – 06 ; Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

22-115)     ASTM D635 – 06 ; Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

22-116)     ASTM D638 – 08 ; Standard Test Method for Tensile Properties of Plastics

22-117)     ASTM D6380 – 03(2009) ; Standard Specification for Asphalt Roll Roofing (Organic Felt)

22-118)     ASTM D6690 – 07 ; Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

22-119)     ASTM D695 – 08 ; Standard Test Method for Compressive Properties of Rigid Plastics

22-120)    ASTM D882 – 09 ; Standard Test Method for Tensile Properties of Thin Plastic Sheeting

22-121)    ASTM E119 – 09c ; Standard Test Methods for Fire Tests of Building Construction and Materials

22-122)    ASTM E84 – 10 ; Standard Test Method for Surface Burning Characteristics of Building Materials

22-123)    ASTM F1183 – 96(2006) ; Standard Specification for Aluminum Alloy Chain Link Fence Fabric

22-124)    BDS 1301 : 1990 ; Specification for Glazed Earthenware Wall Tiles;

22-125)    BDS 1301:1990 ; Specification for Glazed Earthenware Wall Tiles;

22-126)    BDS 1493:1994 ; Glossary of terms used in refractory

22-127)    BDS 1494:1994 ; Dimension of refractory bricks

22-128)    BDS 1495:1994 ; High aluminium refractory bricks

22-129)    BDS 809:1973 ; Specification for Wood Poles for Overhead Power and Telecommunication Lines;

22-130)    BDS 885:1979 ; Method for Measuring Viscosity Number and K-Value of PVC Resins;

22-131)    BDS 886:1978 ; Method for Direct Measuring the Specific Gravity of Plastics;

22-132)    BDS 887:1978 ; Method for Measuring Deformation under Heat of Flexible Rigid PVC Compounds;

22-133)    BDS 888:1978 ; Method for Measuring Temperature of Deflection under Load;

22-134)    BDS 889:1978 ; Method for Measuring the Vicat Softening Temperature (VST) of Thermoplastics;

22-135)    BDS 890:1978 ; Method for Measuring the Water Absorption at Room Temperature and Bolling Water Absorption of Plastics;

22-136)    BDS 891:1978 ; Method for Measuring the Flexural Modulus of Plastics;

22-137)    BDS 892:1978 ; Method for Measuring the Resistance to Tear Propagation of Flexible Plastics, Film or Sheeting;

22-138)    BS 6431 ; Floor and Wall Tiles;

22-139)    BS 6431 Part 1 1983 ; Specification for Classification and Making, Including Definitions and Characteristics;

22-140)    BS 6431 Part 1 to Part 23 ; Ceramic Floor and Wall Tiles.

22-141)    BS 6431 Part 10 1984 ; Method for Determination of Dimensions and Surface Quality;

22-142)    BS 6431 Part 11 1983 ; Method for Determination of Water Absorption;

22-143)    BS 6431 Part 12 1983 ; Method for Determination of Modulus of;

22-144)    BS 6431 Part 13 1986 ; Method for Determination of Scratch Hardness of Surface According to Mhos;

22-145)    BS 6431 Part 14 1983 ; Method for Determination of Resistance to Abrasion of Unglazed Tiles;

22-146)    BS 6431 Part 15 1983 ; Method for Determination of Linear Thermal Expansion;

22-147)    BS 6431 Part 16 1983 ; Method for Determination of Resistance to Thermal Shock;

22-148)    BS 6431 Part 17 1983 ; Method for Determination of Crazing Resistance-Glazed Tiles;

22-149)    BS 6431 Part 18 1983 ; Method for Determination of Chemical Resistance-Unglazed Tiles;

22-150)    BS 6431 Part 19 1984 ; Method for Determination of Chemical Resistance-Unglazed Tiles;

22-151)    BS 6431 Part 2 1984 ; Specification for Struded Ceramic Tiles with Low Water Absorption (E< 3%) Group A1;

22-152)    BS 6431 Part 20 1984 ; Method for Determination of Resistance to Surface Abrasion-Glazed Tiles;

22-153)    BS 6431 Part 23 1986 ; Specification for Sampling and Basis for Acceptance;

22-154)    BS 6431 Part 3 ; Extruded Ceramic Tiles with a Water Absorption of 3% < 6%. Group A 11a;

22-155)    BS 6431 Part 3 Section 3.1 1986 ; Specification for General Products;

22-156)    BS 6431 Part 3 Section 3.2 1986 ; Specification for Products Terre Cuite, Cotto, Baldosion Catalan;

22-157)    BS 6431 Part 4 ; Extruded Ceramic Tiles with a Water Absorption of 6% <E< 10%. Group A11b;

22-158)    BS 6431 Part 4 ; Section 4.2 1986

22-159)    BS 6431 Part 4 ; Specification for General Products;

22-160)   BS 6431 Part 5 1986 ; Specification for Extruded Ceramic Tiles with a Water Absorption of E>10%, Group A111;

22-161)    BS 6431 Part 6 1984 ; Specification for Dust-prestressed Ceramic Tiles with a Low-Water Absorption (E<3%)Group B1;

22-162)   BS 6431 Part 7 1986 ; Specification for Dust-prestressed Ceramic Tiles with a Water Absorption of 3% <E £ 6%. Group B11a;

22-163)   BS 6431 Part 8 1986 ; Specification for Dust-prestressed Ceramic Tiles with Water Absorption of 6% < E £ 10%. Group B11b;

22-164)    BS 6431 Part 9 1984 ; Specification for Dust-Prestressed Ceramic Tiles with a Water Absorption of E >10%. Group B111;

22-165)    IS 10102:1982 ; Technical supply conditions for Rivets.

22-166)    IS 110:1968 ; Specification for Ready Mixed Paint, Brushing, Grey Filler, for Enamels, for Use Over Primers (First Revision);

22-167)    IS 1900:1974 ; Method of Testing Wood Poles;

22-168)    IS 1902:1961 ; Code of Practice for Preservation of Bamboo and Cane for Non-structural Purposes;

22-169)    IS 1929:1982 ; Specification for Hot Forged Steel Rivets for Hot Closing (12 to 36 mm diameter) (First Revision);

22-170)    IS 2155:1982 ; Specification for Cold-Forged Solid Steel Rivets for Hot Closing (6 to 16 mm diameter) (First Revision);

22-171)    IS 2365:1977 ; Specification for Steel Wire Suspension Ropes for Lifts, Elevators and Hoists (First Revision).

22-172)    IS 2643:1975 ; Dimensions for Pipe Threads for Fastening Purposes;

22-173)    IS 2907:1964 ; Specification for Non-ferrous Rivets (1.6 mm to 10 mm)

22-174)    IS 2998:1981 ; Specification for Cold Forged Steel Rivets for Cold Closing (1 to 16 mm diameter) (First Revision);

22-175)    IS 3337:1978 ; Specification for Ballies for General Purposes (First Revision);

22-176)    IS 345:1952 ; Specification for Wood Filler, Transparent, Liquid;

22-177)    IS 3709:1966 ; Specification for Mastic Cement for Bedding of Metal Windows;

22-178)    IS 419:1967 ; Specification for Putty for Use on Window Frames (First Revision);

22-179)    IS 421:1953 ; Specification for Jointing Paste, for Bedding Moldings on Coaching Stock;

22-180)    IS 423:1961 ; Specification for Plastic Wood, for Joiners’ Filler (revised);

22-181)    IS 424:1965 ; Specification for Plastic Asphalt (revised);

22-182)    IS 554:1975 ; Dimensions for Pipe Threads where Pressure Tight Joints are Required on the Threads (Second Revision);

22-183)    IS 6711:1972 ; Code of Practice for Maintenance of Wood Poles for Overhead Power and Telecommunications Lines.

22-184)    IS 6874:1973 ; Method of Tests for Round Bamboos;

22-185)    IS 7164:1973 ; Specification for Stopper.

22-186)    IS 8242:1976 ; Methods of Tests for Split Bamboo;

22-187)    IS 8295:1976 ; Specification for Bamboo Chicks, Part I Fine;

22-188)    IS 9096:1979 ; Code of Practice for Preservation of Bamboos for Structural Purposes.

22-189)    ISO 10080:1990 ; Refractory Products-Classification of Dense, Shaped Acid-Resisting Products;

22-190)    ISO 10081:1991 ; Basic Refractory Products-Classification-Part I: Products Containing Less Than 7% Residual Carbon.

22-191)    ISO 10563:1991 ; Building Construction-Sealants for Joints-Determination of Change in Mass and Volume;

22-192)    ISO 10590:1991 ; Building Construction-Sealants-Determination of Adhesion/Cohesion Properties at Maintained Extension after Immersion in Water;

22-193)    ISO 10591 : 1991 ; Building Construction-Sealants-Determination of Adhesion/Cohesion Properties after Immersion in Water.

22-194)    ISO 1109:1975 ; Refractory Products-Classification of Dense Shaped Refractory Products;

22-195)    ISO 1146:1988 ; Pyrometric Reference Cones for Laboratory Use-Specification;

22-196)    ISO 1893:1989 ; Refractory Products-Determination of Refractoriness-Under-Load (differential with rising temperature);

22-197)    ISO 1927:1984 ; Prepared Unshaped Refractory Materials (Dense and Insulating) Classification;

22-198)    ISO 2245:1990 ; Shaped Insulating Refractory Products-Classification;

22-199)    ISO 2444 : 1988 ; Joints in Buildings-Vocabulary;

22-200)    ISO 2477:1987 ; Shaped Insulating Refractory Products-Determination of Permanent Change in Dimensions on Heating;

22-201)    ISO 2478:1987 ; Dense Shaped Refractory Products-Determination of Permanent Change in Dimensions on Heating;

22-202)    ISO 3187:1989 ; Refractory Products-Determination of Creep in Compression;

22-203)    ISO 3867:1982 ; Agglomerated Cork-Material of Expansion Joints for Construction and Building Test-Methods;

22-204)    ISO 3869:1981 ; Agglomerated Cork-Filler Material of Expansion Joints for Construction and Buildings -Characteristics, Sampling and Packing;

22-205)    ISO 3934:1978 ; Rubber Building Gaskets-Materials in Preformed Solid Vulcanizates Used for Sealing Glazing and Panels-Specification;

22-206)    ISO 3934:1978 ; Rubber Building Gaskets-Materials in Preformed Solid Vulcanizates Used for Sealing Glazing and Panels-Specification;

22-207)    ISO 4633:1983 ; Rubber Seals-Joint Rings for Water Supply, Drainage and Sewerage Pipelines-Specification for Materials;

22-208)    ISO 4633:1983 ; Rubber Seals-Joint Rings for Water Supply, Drainage and Sewerage Pipelines-Specifications for Materials;

22-209)    ISO 4635:1982 ; Rubber, Vulcanized-Preformed Compression Seals for Use

22-210)    ISO 4635:1982 ; Rubber, Vulcanized-Preformed Compression Seals for Use Between Concrete Motorway Paving Sections-Specification for Material;

22-211)     ISO 5013:1985 ; Refractory Products-Determination of Modulus of Rupture at Elevated Temperatures;

22-212)    ISO 5014:1986 ; Refractory Products-Determination of Modulus of Rupture at Ambient Temperature;

22-213)    ISO 5015-6:1984 ; Refractory Bricks-Dimensions-Part 6: Basic Bricks for Oxygen Steel Making Converters;

22-214)    ISO 5016:1986 ; Shaped Insulating Refractory Products-Determination of Bulk Density and True Porosity;

22-215)    ISO 5017:1988 ; Dense Shaped Refractory Products-Determination of Bulk Density,

22-216)    ISO 5018:1983 ; Refractory Materials-Determination of True Density;

22-217)    ISO 5019-1:1984 ; Refractory Bricks-Dimensions-Part I: Rectangular Bricks;

22-218)    ISO 5019-2:1984 ; Refractory Bricks-Dimensions-Part 2: Arch Bricks;

22-219)    ISO 5019-3:1984 ; Refractory Bricks-Dimensions-Part 3: Rectangular Checker Bricks for Regenerative Furnace;

22-220)    ISO 5022:1979 ; Shaped Refractory Products-Sampling and Acceptance Testing;

22-221)    ISO 528:1983 ; Refractory Products-Determination of Pyrometric Cone Equivalent (refractoriness);

22-222)    ISO 5417-1986 ; Refractory Bricks for Use in Rotary Kilns-Dimensions;

22-223)    ISO 5419-4:1988 ; Refractory Bricks-Dimensions-Part 4: Dome Bricks for Electric arc Furnace Roofs;

22-224)    ISO 5892:1981 ; Rubber Building Gaskets-Materials for Preformed Solid Vulcanized Structural Gaskets-Specification;

22-225)    ISO 5892:1981 ; Rubber Building Gaskets-Materials for Preformed Solid Vulcanized Structural Gaskets-Specification;

22-226)    ISO 6447:1983 ; Rubber Seals-Joint Rings Used for Gas Supply Pipes and Fittings-Specification for Material;

22-227)    ISO 6447:1991 ; Rubber Seals-Joint Rings Used for Gas Supply Pipes and Fittings- Specification for Material;

22-228)    ISO 6589:1983 ; Joints in Building-Laboratory Method of Test for Air Permeability of Joints;

22-229)    ISO 7389:1987 ; Building Construction-Jointing Products-Determination of Elastic Recovery;

22-230)    ISO 7390:1987 ; Building Construction-Jointing Products-Determination of Resistance to Flow;

22-231)    ISO 7727:1984 ; Joints in Building-Principles for Jointing of Building Components-Accommodation of Dimensional Deviations During Construction;

22-232)    ISO 8339:1984 ; Building Construction-Jointing Products-Sealants-Determination of Tensile Properties;

22-233)    ISO 8340:1984 ; Building Construction-Jointing Products-Sealants-Determination of Tensile Properties at Maintained Extension;

22-234)    ISO 8394:1988 ; Building Construction-Jointing Products-Determination of Extrudability of One-Component Sealants;

22-235)    ISO 8656:1988 ; Refractory Products-Sampling of Raw Materials and Unshaped Products;

22-236)    ISO 8840:1987 ; Refractory Materials-Determination of Bulk Density of Granular Materials (Grain Density);

22-237)    ISO 8890:1988 ; Dense Shaped Refractory Products-Determination of Resistance to Sulfuric Acid;

22-238)    ISO 8894-1:1987 ; Refractory Materials-Determination of Thermal Conductivity-

22-239)    ISO 8894-2:1990 ; Refractory Materials-Determination of Thermal Conductivity-

22-240)    ISO 8895:1986 ; Shaped Insulating Refractory Products-Determination of Cold Crushing Strength;

22-241)    ISO 9046:1987 ; Building Construction-Sealants-Determination of Adhesion/ Cohesion Properties at Constant Temperature;

22-242)    ISO 9047:1989 ; Building Construction-Sealants-Determination of Adhesion/ Cohesion Properties at Variable Temperatures;

22-243)    ISO 9205:1988 ; Refractory Bricks for Use in Rotary Kilns-Hot-face Identification Marking;

22-244)    ISO 9331:1991 ; Rubber Seals Joint Rings for Hot Water Supply Pipelines up to 110oC Specifications for the Material.

22-245)    ISO 9631:1991 ; Rubber Seals-Joint Rings for Hot Water Supply Pipelines up to 110oC Specifications for the Material;1-1)             ANSI A108.1-2009 ; Specifications for the Installation of Ceramic Tile with Portland Cement Mortar;

21. SANITARY APPLIANCES AND WATER FITTINGS

건설자재 시험 및 인증 관련 규격목록 21

21. SANITARY APPLIANCES AND WATER FITTINGS

21-1)        ASTM A377 – 03(2008)e1 ; Standard Index of Specifications for Ductile-Iron Pressure Pipe

21-2)        ASTM A53 / A53M – 07 ; Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

21-3)        ASTM A74 – 09 ; Standard Specification for Cast Iron Soil Pipe and Fittings

21-4)        ASTM B209 – 07 ; Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

21-5)        ASTM B251 – 02e1 ; Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

21-6)        ASTM B302 – 07 ; Standard Specification for Threadless Copper Pipe, Standard Sizes

21-7)        ASTM B306 – 09 ; Standard Specification for Copper Drainage Tube (DWV)

21-8)        ASTM B42 – 02e1 ; Standard Specification for Seamless Copper Pipe, Standard Sizes

21-9)        ASTM B42 – 02e1 ; Standard Specification for Seamless Copper Pipe, Standard Sizes

21-10)      ASTM B429 / B429M – 06 ; Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

21-11)      ASTM B43 – 09 ; Standard Specification for Seamless Red Brass Pipe, Standard Sizes

21-12)      ASTM B447 – 07 ; Standard Specification for Welded Copper Tube

21-13)      ASTM B745 / B745M – 97(2005) ; Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

21-14)      ASTM B75 – 02 ; Standard Specification for Seamless Copper Tube

21-15)      ASTM B88 – 09 ; Standard Specification for Seamless Copper Water Tube

21-16)      ASTM C14 – 07 ; Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe

21-17)      ASTM C425 – 04(2009) ; Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

21-18)      ASTM C443 – 05ae1 ; Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

21-19)      ASTM C508 / C508M – 00(2009)e1 ; Standard Specification for Asbestos-Cement Underdrain Pipe

21-20)      ASTM C564 – 09a ; Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

21-21)      ASTM C654 – 05a ; Standard Specification for Porous Concrete Pipe

21-22)      ASTM C700 – 09 ; Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated

21-23)      ASTM C76 – 10a ; Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

21-24)      ASTM D1527 – 99(2005) ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80

21-25)      ASTM D1785 – 06 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

21-26)      ASTM D1869 – 95(2005)e1 ; Standard Specification for Rubber Rings for Asbestos-Cement Pipe

21-27)      ASTM D2235 – 04 ; Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

21-28)      ASTM D2239 – 03 ; Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

21-29)      ASTM D2241 – 09 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

21-30)      ASTM D2321 – 09 ; Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications ASTM D2464 – 06 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

21-31)      ASTM D2466 – 06 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40ASTM D2467 – 06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

21-32)      ASTM D2564 – 04(2009)e1 ; Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems

21-33)      ASTM D2609 – 02(2008) ; Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

21-34)      ASTM D2657 – 07 ; Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings

21-35)      ASTM D2661 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

21-36)      ASTM D2661 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

21-37)      ASTM D2665 – 09 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

21-38)      ASTM D2672 – 96a(2009) ; Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement

21-39)      ASTM D2729 – 03 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

21-40)      ASTM D2737 – 03 ; Standard Specification for Polyethylene (PE) Plastic Tubing

21-41)      ASTM D2751 – 05 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings

21-42)      ASTM D2846 / D2846M – 09b ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

21-43)      ASTM D2846 / D2846M – 09b ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

21-44)      ASTM D2855 – 96(2010) ; Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings

21-45)      ASTM D2949 – 01a(2008)e1 ; Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

21-46)      ASTM D3034 – 08 ; Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

21-47)      ASTM D3139 – 98(2005) ; Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

21-48)      ASTM D3212 – 07 ; Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

21-49)      ASTM F402 – 05 ; Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

21-50)      ASTM F405 – 05 ; Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings

21-51)      ASTM F409 – 02(2008) ; Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

21-52)      ASTM F437 – 09 ; Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

21-53)      ASTM F438 – 09 ; Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

21-54)      ASTM F441 / F441M – 09 ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

21-55)      ASTM F442 / F442M – 09 ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)

21-56)      ASTM F493 – 04 ; Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

21-57)      ASTM F628 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

21-58)      ASTM F628 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

21-59)      ASTM F656 – 08 ; Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

21-60)      ASTM F891 – 09 ; Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

21-61)      BDS 1111:1984 ; Centrifugally Cast (spun) Iron Pressure Pipes for Water, Gas and Sewage;

21-62)      BDS 1162 : 2006 (1st revision) ; Ceramic wash basin and pedestal, ceramic wash basin and pedestals dimension, design & construction, type, permissible deviation

21-63)      BDS 1163 : 1987 ; Specification for Vitreous Sanitary Appliances,

21-64)      BDS 1356:1992 ; Specification for Ferrules for Water Services;

21-65)      BDS 1357: 1992 ; Specification for Washers with Fittings for Water Service;

21-66)      BDS 1361 : 1992 ; Faucets

21-67)      BDS 1361:1992 ; Faucets

21-68)      BDS 1507 : 1995 ; Bib taps used in water supply

21-69)      BDS 1508 : 1995 ; Stop taps used in water supply.Specifies the requirements, dimensions construction, materials and test methods of stop taps used in water supply.

21-70)      BDS 1508:1995 ; Stop taps used in water supply.

21-71)      BDS 1509:1995 ; Pillar taps used in water supply

21-72)      BDS 1562:1997 ; Solvent cements for polyvinyl chloride (PVC) plastic pipe and fitting.

21-73)      BDS 1593 : 1998 ; Plastic sanitary squatting pan

21-74)      BDS 1593:1998 ; Plastic sanitary squatting pan

21-75)      BDS 428:1964 ; Specification for Asbestos Cement Pressure Pipe;

21-76)      BDS 429:1964 ; Specification for Asbestos Cement Building and Sanitary Pipes (under revision);

21-77)      BDS 987 : 1981 ; Sand cast brass screw‐down bib taps and stop taps for water services.

21-78)      BDS EN 1112: 2009 ; Sanitary tapware ‐ Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 – General technical specification

21-79)      BDS EN 1113: 2009 ; Sanitary tapware – Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 – General technical specification

21-80)      BDS EN 1254‐2: 2009 ; Copper and copper alloys ‐ Plumbing fittings – Part 2: Fittings with compression ends for use with copper tubes

21-81)      BDS EN 14506: 2009 ; Devices to prevent pollution by backflow of potable water – Automatic diverter – Family H, type C

21-82)      BDS EN 1717: 2009 ; Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow

21-83)      BDS EN 200: 2009 ; Sanitary tapware — Single taps and combination taps for water supply systems of type 1 and type 2 — General technical specification

21-84)      BDS EN 246: 2009 ; Sanitary tapware – General specifications for flow rate regulators

21-85)      BDS EN 248: 2009 ; Sanitary tapware – General specification for electrodeposited coatings of Ni‐Cr

21-86)      BDS EN 681-1: 2008 ; Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber

21-87)      BDS EN 681-2 : 2008 ; Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers

21-88)      BDS ISO /TR 4191: 2008 ; Unplasticized polyvinyl chloride (PVC-U) pipes for water supply-Recommended practice for laying

21-89)      BDS ISO 11413:2010 ; Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting BDS ISO 11414, Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

21-90)      BDS ISO 1167-1 : 2008 ; Thermoplastics pipes fittings and assemblies for the conveyance of fluids – Determination of the resistance to internal pressure- Part 1: General method

21-91)      BDS ISO 1167-2 : 2008 ; Thermoplastics pipes fittings and assemblies for the conveyance of fluids- Determination of the resistance to internal pressure-

21-92)      BDS ISO 12176-2:2010 ; Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion

21-93)      BDS ISO 12176-3:2010 ; Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator’s badge

21-94)      BDS ISO 12176-4:2010 ; Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding

21-95)      BDS ISO 13479:2010 ; Polyolefin pipes for the conveyance of fluids — Determination of

21-96)      BDS ISO 13761:2010 ; Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 °C

21-97)      BDS ISO 13951:2010 ; Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading

21-98)      BDS ISO 13953:2010 ; Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

21-99)      BDS ISO 13954:2010 ; Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

21-100)    BDS ISO 13955:2010 ; Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies

21-101)    BDS ISO 13957:2010 ; Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance

21-102)    BDS ISO 14236:2010 ; Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems

21-103)    BDS ISO 161-1 : 2008 ; Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and Nominal Pressures- Part 1: Metric series

21-104)    BDS ISO 161-2 : 2008 ; Thermoplastics pipes for the conveyance of fluids- Nominal outside diameters and Nominal Pressures- Part 2: Inch – based series

21-105)    BDS ISO 1746 : 2008 ; Rubber or Plastics hoses and tubing-Bending tests

21-106)    BDS ISO 18553:2010 ; Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

21-107)    BDS ISO 18553:2010 ; Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds Amendment 1:2010

21-108)    BDS ISO 2505 : 2008 ; Thermoplastics pipes- Longitudinal reversion – Test method and parameters

21-109)    BDS ISO 2507-2 : 2008 ; Thermoplastics pipes and fittings – Vicat softening temperature- Part 2: Test conditions for Unplasticized poly (Vinyl chloride) (PVC-U) or chlorinated poly (Vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (Vinyl chloride) (PVC-HI) pipes

21-110)     BDS ISO 265-1 : 2008 ; Pipes and fittings of plastics materials- fittings for domestic and industrial waste pipes- Basic dimensions: Metric series- Part 1: Unplasticized Poly (Vinyl chloride) (PVC-U)

21-111)     BDS ISO 3114: 2008 ; Unplasticized polyvinyl chloride (PVC) pipes for potable water supply-Extractability of lead and tin- Test method

21-112)     BDS ISO 3126 : 2008 ; Plastics piping systems-Plastics components- Determination of dimensions

21-113)     BDS ISO 3127: 2008 ; Thermoplastics pipes- Determination of resistance to external blows-Round – the – clock method

21-114)     BDS ISO 3419: 2008 ; Non – alloy and alloy steel butt–welding fittings

21-115)     BDS ISO 3458:2010 ; Assembled joints between fittings and polyethylene (PE)

21-116)     BDS ISO 3459:2010 ; Polyethylene (PE) pressure pipes — Joints assembled with mechanical fittings — Internal under pressure test method and requirement

21-117)     BDS ISO 3501:2010 ; Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of resistance to pull-out

21-118)     BDS ISO 3503:2010 ; Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure when subjected to bending

21-119)     BDS ISO 3633: 2008 ; Plastics piping systems for soil and waste discharge (Low and high temperature ) inside buildings- Specifications

21-120)    BDS ISO 3822-‐1: 2009 ; Acoustics: Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 1: Method of measurement

21-121)    BDS ISO 3822-‐2: 2009 ; Acoustics: Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 2: Mounting and operating conditions for draw‐off taps and mixing valves

21-122)    BDS ISO 3822-‐4: 2009 ; Acoustics: Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 4: Mounting and operating conditions for special appliances

21-123)    BDS ISO 4065: 2008 ; Thermoplastics pipes- Universal wall thickness table

21-124)    BDS ISO 4422-1: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply – Specifications – Part 1: General

21-125)    BDS ISO 4422-2: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply – Specifications – Part 2: Pipes (with or without integral sockets)

21-126)    BDS ISO 4422-3: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride)(PVC-U) for water supply- Specifications – Part 3: Fittings and joints

21-127)    BDS ISO 4422-4: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply- Specifications- Part 4: Valves and ancillary equipment

21-128)    BDS ISO 4422-5: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC- U) for water supply- Specifications- Part 5: Fitness for purpose of the system

21-129)    BDS ISO 4427-1:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General

21-130)    BDS ISO 4427-1:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General Technical corrigendum 1: 2010

21-131)    BDS ISO 4427-2:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes

21-132)    BDS ISO 4427-3:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings

21-133)    BDS ISO 4427-5:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system

21-134)    BDS ISO 4433-3: 2008 ; Thermoplastics pipes- Resistance to liquid chemicals- Classification-Part 3: Unplasticized poly (vinyl chloride) (PVC-U), high- impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC –C) pipes

21-135)    BDS ISO 4435: 2008 ; Plastic piping systems for non- pressure underground drainage and sewerage- Unplasticized poly (vinyl chloride) (PVC-U)

21-136)    BDS ISO 4439: 2008 ; Unplasticized polyvinyl chloride (PVC) pipes and fittings – Determination and specification of density

21-137)    BDS ISO 5251: 2008 ; Stainless steel butt–welding fittings

21-138)    BDS ISO 6259-1: 2008 ; Thermoplastics pipes- Determination of tensile properties- Part 1: General test method

21-139)    BDS ISO 6259-2: 2008 ; Thermoplastics pipes- Determination of tensile properties- Part 2: Pipes made of unplasticized poly (vinyl chloride) (PVC-U), Chlorinated poly (vinyl chloride) (PVC-C), and high – impact poly (vinyl chloride) (PVC-HI)

21-140)    BDS ISO 6761: 2008 ; Steel tubes – Preparation of ends of tubes and fittings for welding

21-141)    BDS ISO 6964:2010 ; Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification

21-142)    BDS ISO 6992: 2008 ; Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply – Extractability of cadmium and mercury occurring as impurities

21-143)    BDS ISO 9624:2010 ; Thermoplastics pipes for fluids under pressure — Mating dimensions of flange adapters and loose backing flanges

21-144)    BS 1010 ; Specification for Draw-Off Taps and Stopvalves for Water Services;

21-145)    BS 1125: 1987 ; Specification for WC Flushing Cisterns (Including Dual Flash Cisterns and Flush Pipes);

21-146)    BS 1212 3 (Parts) ; Specification for Float Operated Valves (excluding floats);

21-147)    BS 1244 ; Metal Sink for Domestic Purposes;

21-148)    BS 1254:1981 ; Specification for C Seats (Plastics);

21-149)    BS 1329:1974 ; Specification for Metal Hand Rinse Basins;

21-150)    BS 1415 ( 2 parts) ; Mixing Valves (Manullay Operated);

21-151)    BS 1876: 1992(1977) ; Specification for Automatic Flushing Cistern for Urinals

21-152)    BS 1968 ; Specification for Floats for Ball Valves (copper);

21-153)    BS 2456: 1973 ; Specification for Floats for Ball Valves (plastic) for Cold and Hot Water

21-154)    BS 3377:1985 ; Specification for Boilers for Use with Domestic Solid Mineral Fuel Appliances;

21-155)    BS 5163: 1986 ; Specification for Predominantly Key-Operated Cast Iron Wedge Gate Valve for Water Works;

21-156)    BS 5433: 1976 ; Specification for Underground Stop valves for Water Services (copper);

21-157)    BS 843: 1976 ; Specification for Thermal Storage Electric Water Heaters;

21-158)    BS 855:1976 ; Specification for Welded Steel Boilers for Central Heating and Indirect Hot Water Supply.

21-159)    IS 404 (Part-I)-1993 ; Specification for Lead Pipes Part I for other than Chemical Purpose (third Revision);

21-160)    ISO 160: 1980 ; Asbestos-Cement Pressure Pipes and Joints;

21-161)    ISO 2531-1991 ; Ductile Iron Pipes, Fittings and Accessories for Pressure Pipelines;

21-162)    ISO 392:1986 ; Asbestos-Cement Pipe Fittings for Building and Sanitary Purposes;

21-163)    ISO 881:1980 ; Asbestos-Cement Pipes, Joints and Fittings for Sewerage and Drainage;

 

 

 

 

 

 

20. PAINTS AND VARNISHES

건설자재 시험 및 인증 관련 규격목록 20

20. PAINTS AND VARNISHES

20-1)        BDS 1005:1981 ; Specification for Ready Mixed Paint, Brushing, Finishing, Stoving, Enamel, Colour as Required;

20-2)        BDS 1064:1983 ; Specification for Varnish, Stoving;

20-3)        BDS 1065:1983 ; Specification for Varnish, Acid Resisting;

20-4)        BDS 1066:1983 ; Specification for Varnish, Finishing, Interior;

20-5)        BDS 1097:1984 ; Specification for Plastic Emulsion Paint.

20-6)        BDS 1141:1986 ; Specification for Ready Mixed Aluminium Priming Paints for Woodwork;

20-7)        BDS 1151:1986 ; Specification for Pavement Marking Paints.

20-8)        BDS 13:1960 ; Specification for Ready Mixed Paints, Varnish, Lacquers and Related Products (under revision);

20-9)        BDS 14:1960 ; Specification for Black Bituminous Paint, Brushing for General Purposes (under revision);

20-10)      BDS 397:1964 ; Specification for Ready Mixed Paint, Brushing, Red Oxide Zinc Chrome, Priming (under revision);

20-11)      BDS 398:1964 ; Specification for Ready Mixed Paint, Spraying, Red Oxide Zinc Chrome, Priming (under revision);

20-12)      BDS 399:1964 ; Specification for Aluminum Paint, Spraying for General Purposes, in Dual Container (under revision);

20-13)      BDS 400:1964 ; Specification for Aluminium Paint, Brushing, for General Purposes in Dual Container (under revision);

20-14)      BDS 401:1964 ; Specification for Varnish, Finishing, Exterior, Type-I, (Synthetic) (Tentative) (under revision);

20-15)      BDS 401:1964 ; Specification for Varnish, Finishing, Exterior, Type-I, (synthetic) (under revision);

20-16)      BDS 402:1989 ; Specification for Ready Mixed Paint, Brushing, Finishing, Semigloss, for General Purposes (First Revision);

20-17)      BDS 499:1965 ; Specification for Ready Mixed Paints, Brushing, for Road Marking (white, yellow and black) (under revision);

20-18)      BDS 500:1965 ; Specification for Distemper Dry (under revision);

20-19)      BDS 616:1966 ; Specification for Enamel, Brushing, Exterior (i) Undercoating, (ii) Finishing, Colour as Required (under revision);

20-20)      BDS 617:1966 ; Specification for Enamel, Brushing, Interior (i) Undercoating, (ii) Finishing, Colour as Required (under revision);

20-21)      BDS 926:1980 ; Specification for Ready Mixed Paint, Brushing, Petrol Resisting, Air Drying, for Exterior Painting of Containers, Colour as Required;

20-22)      BDS 927:1980 ; Specification for Ready Mixed Paint, Brushing, Petrol Resisting, Air Drying, for Interior Painting of Tanks and Containers, Red Oxide (colour unspecified);

20-23)      BDS 928:1980 ; Specification for Ready Mixed Paint, Brushing, Acid Resisting, for Protection Against Acid Fumes, Colour as Required;

20-24)      BDS 973:1981 ; Specification for Specification and Methods of Test for Linseed Stand Oil for Paints and Varnishes;

20-25)      BDS 974:1981 ; Specification and Methods of Test for Raw Tung Oils for Paints and Varnishes;

20-26)      IS 101 ; Methods of sampling and test for paints, varnishes and related products:

20-27)      IS 104:1979 ; Specification for ready mixed paint, brushing, zinc chrome, priming (second revision)

20-28)      IS 109:1968 ; Specification for ready mixed paint, brushing, priming, plaster to Indian Standard colours No. 361 and 631 (first revision)

20-29)      IS 11883:1986 ; Specification for ready mixed paint, brushing, red oxide, priming for metals

20-30)      IS 123:1962 ; Specification for ready mixed paint, brushing, finishing, semi-gloss, for general purposes, to Indian Standard colours No. 445, 446, 448, 449, 451 and 473; and red oxide (colour unspecified) (revised)

20-31)      IS 13183:1991 ; Specification for aluminium paints, heat resistant

20-32)      IS 13213:1991 ; Specification for polyurethane full gloss enamel (two pack)

20-33)      IS 133:1993 ; Specification for enamel, interior (a) undercoating, (b) finishing (third revision)

20-34)      IS 13607:1992 ; Specification for ready mixed paint, finishing, general purposes, synthetic

20-35)      IS 137:1965 ; Specification for ready mixed paint, brushing, matt or egg-shell flat, finishing, interior, to Indian Standard colour, as required (revised)

20-36)      IS 13871:1993 ; Specification for powder coatings

20-37)      IS 14314:1995 ; Specification for thinner general purposes for synthetic paints and varnishes

20-38)      IS 158:1981 ; Specification for ready mixed paint, brushing, bituminous, black, lead-free, acid, alkali, and heat resisting (third revision)

20-39)      IS 168:1993 ; Specification for ready mixed paint, air-drying semi-glossy/matt, for general purposes (third revision)

20-40)      IS 2074:1992 ; Specification for ready mixed paint, air drying red oxide-zinc chrome, priming (second revision)

20-41)      IS 2075:2000 ; Specification for ready mixed paint, stoving, red oxide-zinc chrome, priming (second revision)

20-42)      IS 2339:1963 ; Specification for aluminium paint for general purposes, in dual container

20-43)      IS 2932:2003 ; Specification for enamel, synthetic, exterior, (a) undercoating, (b) finishing (third revision)

20-44)      IS 2933:1975 ; Specification for enamel, exterior, (a) undercoating, (b) finishing (first revision)

20-45)      IS 324:1959 ; Specification for ordinary denatured spirit (revised)

20-46)      IS 324-1959 ; Specification for Ordinary Denatured Spirit (revised);

20-47)      IS 337:1975 ; Specification for varnish, finishing, interior (first revision)

20-48)      IS 341:1973 ; Specification for black Japan, Types A, B and C first revision)

20-49)      IS 347-1975 ; Specification for Varnish, Shellac for general purposes (First Revision);

20-50)      IS 348-1968 ; Specification for French Polish (First Revision);

20-51)      IS 3536:1999 ; Specification for ready mixed ‘paint, brushing, wood primer

20-52)      IS 3537:1966 ; Specification for ready mixed paint, finishing, interior for general purposes, to Indian Standard colours No. 101, 216, 217, 219, 275:”281, 352, 353, 358 to 361, 363,364,388,410,442, 444,628, 631,632,634,693,697, white andblack

20-53)      IS 3539:1966 ; Specification for ready mixed paint, undercoating, for use under oil finishes, to Indian Standard colours, as required

20-54)      IS 3585:1966 ; Specification for ready mixed paint, aluminium, brushing, priming, water resistant, for wood work

20-55)      IS 3678:1966 ; Specification for ready mixed paint, thick white, for lettering

20-56)      IS 427:1965 ; Specification for distemper, dry, colour as required (revised)

20-57)      IS 428:2000 ; Specification for distemper, washable (second revision)

20-58)      IS 524:1983 ; Specification for varnish, finishing, exterior, synthetic (second revision)

20-59)      IS 525:196 ; Specification for varnish, finishing, exterior and general purposes (first revision)

20-60)      IS 533:1998 ; Specification for gum spirit of turpentine (oil of turpentine) (second revision)

20-61)      IS 5410:1992 ; Specification for cement paint, colour as required (first revision)

20-62)      IS 5411 ; Specification for plastic emulsion paint:

20-63)      IS 642:1963 ; Specification for varnish medium for aluminium paint (revised)

20-64)      IS 82:1992 ; Methods of sampling and test for thinners and solvents for paints (first revision)

20-65)      IS 8662:1993 ; Specification for enamel, synthetic, exterior, (a) undercoating, (b) finishing, for railway coaches (first revision)

20-66)      IS 9862:1981 ; Specification for ready mixed paint, brushing, bituminous black lead free, acid, alkali, water and chlorine resisting

19. ROOF COVERINGS

건설자재 시험 및 인증 관련 규격목록 19

19. ROOF COVERINGS

19-1)        ASTM A755 / A755M – 03(2008) ; Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Pre-painted by the Coil-Coating Process for Exterior Exposed Building Products

19-2)        ASTM B101 – 07 ; Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

19-3)        ASTM C1029 – 09 ; Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

19-4)        ASTM C222 – 97(2008) ; Standard Specification for Asbestos-Cement Roofing Shingles

19-5)        ASTM C406 – 06e1 ; Standard Specification for Roofing Slate

19-6)        ASTM C836 / C836M – 10 ; Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

19-7)        ASTM D1227 – 95(2007) ; Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing

19-8)        ASTM D1863 – 05 ; Standard Specification for Mineral Aggregate Used on Built-Up Roofs

19-9)        ASTM D2178 – 04 ; Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

19-10)      ASTM D225 – 07 ; Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules

19-11)      ASTM D226 / D226M – 09 ; Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

19-12)      ASTM D227 – 03 ; Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

19-13)      ASTM D2626 – 04 ; Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

19-14)      ASTM D2898 – 10 ; Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

19-15)      ASTM D312 – 00(2006) ; Standard Specification for Asphalt Used in Roofing

19-16)      ASTM D3161 – 09 ; Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method)

19-17)      ASTM D3747 – 79(2007) ; Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation

19-18)      ASTM D3909 – 97b(2004)e1 ; Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules

19-19)      ASTM D4272 – 09 ; Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop

19-20)      ASTM D4434 / D4434M – 09 ; Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

19-21)      ASTM D450 – 07 ; Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

19-22)      ASTM D4601 – 04 ; Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing

19-23)      ASTM D4637 – 08 ; Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

19-24)      ASTM D4897 / D4897M – 01(2009) ; Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

19-25)      ASTM D6380 – 03(2009) ; Standard Specification for Asphalt Roll Roofing (Organic Felt)

19-26)      ASTM D6380 – 03(2009) ; Standard Specification for Asphalt Roll Roofing (Organic Felt)

19-27)      ASTM E108 – 10a ; Standard Test Methods for Fire Tests of Roof Coverings

19-28)      ASTM G154 – 06 ; Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials

19-29)      ASTM G155 – 05a ; Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

19-30)      ASTM G90 – 05 ; Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight

19-31)      BDS 1046:1983 ; Specification for Asbestos Cement Products – Corrugated Sheets and Fittings for Roofing and Cladding;

19-32)      BDS 1122:1985 ; Specification for Hot-dip Galvanized Steel and Coil.

19-33)      BDS 430:1964 ; Specification for Asbestos Cement Corrugated Sheets for Roofing and Cladding

19-34)      BDS 431:1964 ; Specification for Asymmetrical Section Corrugated Sheets in Asbestos Cement for Roofing and Cladding

19-35)      BDS 579:1966 ; Specification for Asbestos Cement Flat Sheets (under revision);

19-36)      BDS 868:1978 ; Code of Practice for Galvanized Corrugated Sheet Roof and Wall Coverings;

19-37)      BDS EN 1024: 2008 ; Clay roofing tiles for discontinuous laying — Determination of geometric characteristics

19-38)      BDS EN 1304: 2008 ; Clay roofing tiles and fittings — Product definitions and specifications

19-39)      BDS EN 490: 2008 ; Concrete roofing tiles and fittings for roof covering and all cladding — Product specifications

19-40)      BDS EN 49l: 2008 ; Concrete roofing tiles and fittings for roof covering and wall cladding — Test methods

19-41)      BDS EN 538: 2008 ; Clay roofing tiles for discontinuous laying — Flexural strength test

19-42)      BDS EN 539-l: 2008 ; Clay roofing tiles for discontinuous laying Determination of physical characteristics — Part 1: Impermeability test

18. BUILDERS HARDWARE 건설자재 시험 및 인증 관련 규격목록 18

건설자재 시험 및 인증 관련 규격목록 18

18. BUILDERS HARDWARE

18-1)        BDS 113:1986 ; Specification for Latches and Locks for Doors in Buildings;

18-2)        IS 10019-1981 ; Specification for Steel Window Stays and Fasteners;

18-3)        IS 10090-1982 ; Specification for Numericals;

18-4)        IS 1019-1974 ; Specification for Rim Latches (Second Revision);

18-5)        IS 10342-1982 ; Specification for Curtain Rail System

18-6)        IS 12817:1997 ; Specification for stainless steel butt hinges (first revision)

18-7)        IS 12867:1989 ; Specification for PVC hand rails covers

18-8)        IS 1341-1992 ; Specification for Steel Butt Hinges (Sixth Revision);

18-9)        IS 14912:2001 ; Specification for door closers concealed type (hydraulically regulated)

18-10)      IS 1823-1980 ; Specification for Floor Door Stoppers (Third Revision);

18-11)      IS 1837-1966 ; Specification for Fanlight Pivots (First Revision);

18-12)      IS 204-1991/1992 ; Specification for Tower Bolts;

18-13)      IS 205-1992 ; Specification for Nonferrous Metal Butt Hinges (fourth Revision);

18-14)      IS 206-1992 ; Specification for Tee and Strap Hinges (Fourth Revision);

18-15)      IS 208-1996 ; Specification for Door Handles (Fifth Revision);

18-16)      IS 2209-1976 ; Specification for Mortice Locks (vertical type) (Third Revision);

18-17)      IS 2681-1993 ; Specification for Nonferrous Metal Sliding Door Bolts for Use with Padlocks (Third Revision);

18-18)      IS 281-1991 ; Specification for Mild Steel Sliding Door Bolts for Use with Padlock (Third Revision);

18-19)      IS 3564-1995 ; Specification for Door Closers (hydraulically regulated) (Second Revision);

18-20)      IS 362-1991 ; Specification for Parliament Hinges (Fifth Revision);

18-21)      IS 363-1993 ; Specification for Hasps and Staples (Fourth Revision);

18-22)      IS 364-1993 ; Specification for Fanlight Catch (Third Revision);

18-23)      IS 3818-1992 ; Specification for Continuous (piano) Hinges (Third Revision);

18-24)      IS 3828-1966 ; Specification for Ventilator Chains;

18-25)      IS 3843-1995 ; Specification for Steel Backflap Hinges; (First Revision)

18-26)      IS 3847-1992 ; Specification for Mortice Night Latches; (First Revision)

18-27)      IS 452-1973 ; Specification for Door Springs, Rat-tail Type (Second Revision);

18-28)      IS 453-1993 ; Specification for Double Acting Spring Hinges (Third Revision);

18-29)      IS 4621-1975 ; Specification for Indicating Bolts for use in Public Baths and Lavatories (First Revision);

18-30)      IS 4948-2002 ; Specification for Welded Steel Wire Fabric for General Use (Second Revision);

18-31)      IS 4992-1975 ; Specification for Door Handles for Mortice Locks (vertical type) (First Revision);

18-32)      IS 5187-1972 ; Specification for Flush Bolts (First Revision);

18-33)      IS 5899-1970 ; Specification for Bathroom Latches;

18-34)      IS 5930-1970 ; Specification for Mortice Latch (vertical type);

18-35)      IS 6315-1971 ; Specification for Floor Springs (hydraulically regulated) for Heavy Doors;

18-36)      IS 6318-1971 ; Specification for Plastic Window Stays and Fasteners;

18-37)      IS 6343-1982 ; Specification for Door Closers (pneumatically regulated) for Light Doors Weighing up to 40 kg (First Revision);

18-38)      IS 6602-1972 ; Specification for Ventilator Poles;

18-39)      IS 6607-1972 ; Specification for Rebated Mortice Locks (vertical type);

18-40)      IS 7196-1974 ; Specification for Hold Fast;

18-41)      IS 7197-1974 ; Specification for Double Action Floor Springs (without oil check) for Heavy Doors;

18-42)      IS 729-1979 ; Specification for Drawer Locks, Cupboard Locks and Box Locks (Third Revision);

18-43)      IS 7534-1985 ; Specification for sliding locking bolts for use with padlocks (first revision);

18-44)      IS 7540-1974 ; Specification for Mortice Dead Locks;

18-45)      IS 8756-1978 ; Specification for Ball Catches for use in Wooden Almirah;

18-46)      IS 8760-1978 ; Specification for Mortice Sliding Door Locks, with Lever Mechanism;

18-47)      IS 9106-1979 ; Specification for Rising Butt Hinges;

18-48)      IS 9131-1979 ; Specification for Rim Locks;

18-49)      IS 9460-1980 ; Specification Flush Drop Handle for Drawer;

18-50)      IS 9899-1981 ; Specification for Hat, Coat and Wardrobe Hooks;

 

17. ALUMINIUM AND ALUMINIUM ALLOYS

건설자재 시험 및 인증 관련 규격목록 17

17. ALUMINIUM AND ALUMINIUM ALLOYS

17-1)        ASTM B108 / B108M – 08 ; Standard Specification for Aluminum-Alloy Permanent Mold Castings

17-2)        ASTM B209 – 07 ; Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

17-3)        ASTM B210 – 04 ; Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

17-4)        ASTM B211 – 03 ; Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire

17-5)        ASTM B221 – 08 ; Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

17-6)        ASTM B241 / B241M – 02 ; Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

17-7)        ASTM B26 / B26M – 09 ; Standard Specification for Aluminum-Alloy Sand Castings

17-8)        ASTM B308 / B308M – 02 ; Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

17-9)        ASTM B313 / B313M – 09 ; Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes

17-10)      ASTM B316 / B316M – 02 ; Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

17-11)      ASTM B429 / B429M – 06 ; Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

17-12)      ASTM B483 / B483M – 03 ; Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications

17-13)      ASTM B547 / B547M – 02 ; Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube

17-14)      ASTM B632 / B632M – 08 ; Standard Specification for Aluminum-Alloy Rolled Tread Plate

17-15)      ASTM B745 / B745M – 97(2005) ; Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

17-16)      ASTM B85 / B85M – 09 ; Standard Specification for Aluminum-Alloy Die Castings

17-17)      ASTM E34 – 94(2002) ; Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys

17-18)      BDS EN 12020-1:2010 ; Aluminium and aluminium alloys— Extruded precision profiles in alloys EN AW-6060 and EN AW-6063— Part 1: Technical conditions for inspection and delivery

17-19)      BDS EN 12020-2:2010 ; Aluminium and aluminium alloys — Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 — Part 2: Tolerances on dimensions and form

17-20)      BDS EN 515:2010 ; Aluminium and aluminium alloys — Wrought products — Temper designations

17-21)      BDS EN 755-1:2010 ; Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 1: Technical conditions for inspection and delivery

17-22)      BDS EN 755-2:2010 ; Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 2: Mechanical properties

17-23)      BDS EN 755-3:2010 ; Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 3: Round bars, tolerances on dimensions and form

17-24)      BDS EN 755-4:2010 ; Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 4: Square bars, tolerances on dimensions and form

17-25)      BDS EN 755-5:2010 ; Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 5: Rectangular bars, tolerances on dimensions and form

17-26)      BDS EN 755-6:2010 ; Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 6: Hexagonal bars, tolerances on dimensions and

17-27)      BDS EN 755-7:2010 ; Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 7: Seamless tubes, tolerances on dimensions and form

17-28)      BDS EN 755-8:2010 ; Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 8: Porthole tubes, tolerances on dimensions and form

17-29)     BDS EN 755-9:2010 ; Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 9: Profiles, tolerances on dimensions and form

 

16. DOORS, WINDOWS AND VENTILATORS

건설자재 시험 및 인증 관련 규격목록 16

16. DOORS, WINDOWS AND VENTILATORS

16-1)        BDS 1270: 1990 ; Specification for Strong Room Door;

16-2)        BDS 1273: 1990 ; Specification for Vault Doors;

16-3)        BDS 142:1961 ; Specification for Wood Door (under revision);

16-4)        BDS 1504:1996 ; Timber door window and ventilator frames

16-5)        BDS 173:1962 ; Specification for Wood Windows (under revision);

16-6)        BDS 820:1978 ; Recommendation for Maximum Permissible Moisture Content of Timber Used for Different Purposes in Bangladesh;

16-7)        BDS EN 12608: 2008 ; Unplasticized polyvinylchloride (PVC – U) profiles for the fabrication of windows and doors — Classification, requirements and test methods

16-8)        BDS EN 477: 2008 ; Unplasticized polyvinylchloride (PVC – U) profiles for the fabrication of windows and doors — Determination of the resistance to impact of main profiles by falling mass

16-9)        BDS EN 478: 2008 ; Unplasticized polyvinylchloride (PVC – U) profiles for the fabrication of windows and doors — Determination of appearance after exposure at 150 ºC

16-10)      BDS EN 479: 2008 ; Unplasticized polyvinylchloride (PVC – U) profiles for the fabrication of windows and doors — Determination of heat reversion

16-11)      BDS EN 513: 2008 ; Unplasticized polyvinylchloride (PVC – U) profiles for the fabrication of windows and doors — Determination of the resistance to artificial weathering

16-12)      BDS EN 514: 2008 ; Unplasticized polyvinylchloride (PVC – U) profiles for the fabrication of windows and doors — Determination of the

16-13)      BDS ISO 1163-1:2008 ; Plastics — Unplasticized poly (vinyl chloride) (PVC – U) moulding and extrusion materials — Part 1: Designation system and basis for specifications

16-14)      BDS ISO 1163-2:2008 ; Plastics — Unplasticized poly (vinyl chloride) (PVC – U) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

16-15)      IS 1003-2003/1994 ; Specification for Timber Panelled and Glazed Shutters;

16-16)      IS 1038-1983 ; Specification for Steel Doors, Windows and Ventilators (Third Revision);

16-17)      IS 10451-1983 ; Specification for Steel Sliding Shutters (top hung type);

16-18)      IS 10521-1983 ; Specification for Collapsible Gates;

16-19)      IS 1361-1978 ; Specification for Steel Windows for Industrial Buildings (First Revision);

16-20)      IS 14856:2000 ; Specification for glass fibre reinforced (GRP) panel type door shutters for internal use

16-21)      IS 15380:2003 ; Specification for moulded raised high density fibre (HDF) panel doors

16-22)      IS 1826-1961 ; Specification for Venetian Blinds for Windows;

16-23)      IS 1948-1961 ; Specification for Aluminium Doors, Windows and Ventilators;

16-24)      IS 1949-1961 ; Specification for Aluminium Windows for Industrial Buildings;

16-25)      IS 2191-1983 ; Specification for Wooden Flush Door Shutters (cellular and hollow core type);

16-26)      IS 2202-1991/83 ; Specification for Wooden Flush Door Shutters (solid core type);

16-27)      IS 4020-1998 ; Method of tests for door shutters:

16-28)      IS 4021:1995 ; Specification for timber door, window and ventilator frames

16-29)      IS 4351-2003 ; Specification for Steel Door Frames (Second Revision);

16-30)      IS 4962:1968 ; Specification for wooden side sliding doors

16-31)      IS 6198:1992 ; Specification for ledged, braced and battened timber shutters (second revision)Revision);

16-32)      IS 6248-1979 ; Specification for Metal Rolling Shutters and Rolling Grills (First Revision);

16-33)      IS 7452-1990 ; Specification for Hot Rolled Steel Sections for Doors, Windows and Ventilators (Second Revision);

15. TIMBER & WOOD PRODUCTS

건설자재 시험 및 인증 관련 규격목록 15

15. TIMBER & WOOD PRODUCTS

15-1)        BDS 1087:1984 ; Specification for Method of Sampling of Plywood :

15-2)        BDS 1090 : 1984 ; Methods of Test of Plywood.

15-3)        BDS 1090:1984 ; Methods of Test for Plywood;

15-4)        BDS 1158:1986 ; Specification for Veneered Decorative Plywood;

15-5)        BDS 1256:1990 ; Classification of Commercial Timber;

15-6)        BDS 1311:1990 ; Key for Identification of Commercial Timber.

15-7)        BDS 142: 1961 ; Specification for Wood Doors (under revision);

15-8)        BDS 173: 1962 ; Specification for Wood Windows (under revision);

15-9)        BDS 230: 1962 ; Glossary of Terms Applicable to Timber, Plywood and Joinery (under revision);

15-10)      BDS 619:1967 ; Specification for Particle Board (medium density) (under revision);

15-11)      BDS 620:1967 ; Specification for Hardboard (under revision);

15-12)      BDS 799:1983 ; Specification for Plywood for General Purposes (First Revision);

15-13)      BDS 803:1973 ; Trade Names and Abbreviated Symbols for Timber Species;

15-14)      BDS 819:1975 ; Code of Practice for Preservation of Timber;

15-15)      BDS 820:1978 ; Recommendation for Maximum Permissible Moisture Content of Timber used for Different Purposes in Bangladesh;

15-16)      BDS 857:1977 ; Specification for Grading Rules for Logs and Sawn Timbers;

15-17)      BDS EN 316:2008 ; Wood Fiberboards — Definition, Classification and Symbols

15-18)      IS 3513:1966 ; Specification for resin treated compressed wood laminates (compregs):

15-19)      IS 3513:1989 ; Specification for resin treated compressed wood laminates (compregs):

15-20)      IS 4835-1979 ; Specification for Polyvinyl Acetate Dispersion-based Adhesives for Wood (First Revision);

15-21)      IS 4990-1993 ; Specification for plywood for concrete shattering work (second revision);

15-22)      IS 5509-2000 ; Specification for fire retardant plywood (second revision);

15-23)      IS 5539-1969 ; Specification for Preservative Treated Plywood.

15-24)      IS 848-1974 ; Specification for Synthetic Resign Adhesives for Plywood (Phenolic and aminoplastic) (First Revision);

15-25)      IS 849-1994 ; Specification for cold setting case in glue for wood (first revision)

15-26)      IS 851-1978 ; Specification for Synthetic Resin Adhesives for Construction Work (non structural) in Wood (First Revision);

15-27)      IS 852-1994 ; Specification for animal glue for general wood-working purposes (second revision);

15-28)      IS 9188-1979 ; Specification for Adhesive for Structural Laminated Wood Products for Use Under Exterior Exposure Condition.

15-29)      IS 9307-1979 (Parts I to VIII) ; Methods of Tests for Wood-based Structural Sandwich Construction.

15-30)      ISO 2695:1976 ; Fibre Building Boards–Hard and Medium Boards for General

15-31)      ISO 2696:1976 ; Fibre Building Boards-Hard and Medium Boards-Quality

15-32)      ISO 3340:1976 ; Fibre Building Boards-Determination of Sand Content;

15-33)      ISO 3346:1976 ; Fibre Building Boards-Determination of Surface Finish (roughness);

15-34)      ISO 3729:1976 ; Fibre Building Boards-Determination of Surface Stability;

15-35)      ISO 766: 1972 ; Fibre Building Boards–Determination of Dimensions of Test Pieces;

15-36)      ISO 767:1975 ; Fibre Building Boards–Determination of Moisture Content;

15-37)      ISO 768:1972 ; Fibre Building Boards–Determination of Bending Strength;

15-38)      ISO 769:1972 ; Fibre Building Boards–Hard and Medium Boards–Determination of

15-39)      ISO 818:1975 ; Fibre Building Boards–Definition-Classification;

15-40)      ISO 819:1975 ; Fibre Building Boards Determination of Density;

15-41)      ISO 820:1975 ; Particle Boards–Definition and Classification

15-42)      ISO 821-1975 ; Particle Boards–Determination of Dimensions of Test Pieces;

15-43)      ISO 822:1975 ; Particle Boards–Determination of Density;

15-44)      ISO 823:1975 ; Particle Boards–Determination of Moisture Content;

15-45)      ISO/TR 7469:1981 ; Dimensional Stability of Hardboards.

 

 

 

14. Welding Electrodes and Wires

건설자재 시험 및 인증 관련 규격목록 14

14. Welding Electrodes and Wires

14-1)        BDS 1442-1:1994 ; Filler rods and wire for gas shielded arc-welding-Ferric steel

14-2)        BDS 1442-2:1994 ; Filler rods and wire for gas shielded arc-welding-Austenitic stainless steel

14-3)        BDS 1442-3:1994 ; Filler rods and wires for gas shielded arc welding-copper and copper alloy

14-4)        BDS 1442-4:1994 ; Filler rods and wires for gas shielded arc welding-Aluminium and Aluminium alloy and magnesium alloys

14-5)        BDS 1442-5:1994 ; Filler rods and wires for gas shielded arc welding-Nickel and nickel alloys

14-6)        BDS 239: 1963 ; Specification for Soft Solder (under revision);

14-7)        IS 1278-1972 ; Specification for Filler Rods and Wires for Gas Welding (Second Revision);

14-8)        IS 1395-1982 ; Specification for Low and Medium Alloy Steel Covered Electrodes for Manual Metal Arc Welding (Third Revision);

14-9)        IS 3613-1974 ; Acceptance Tests for Wire Flux Combinations for Submerged-Arc Welding of Structural Steel (First Revision);

14-10)      IS 4972-1968 ; Specification for Resistance Spot-Welding Electrodes;

14-11)      IS 6419-1996 ; Specification for welding rods and bare electrodes for gas shielded arc welding of structural steel (first revision);

14-12)      IS 6560-1996 ; Specification for molybdenum and chromium-molybdenum low alloy steel welding rods and bare electrodes for gas shielded arc welding (first revision);

14-13)      IS 7280-1974 ; Specification for Base Wire Electrodes for Submerged-Arc Welding of Structural Steels;

14-14)      IS 814 – 1991 ; Specification for covered electrodes for manual metal arc welding of carbon and carbon manganese steel (fifth revision)

14-15)      IS 815-1974 ; Classification and Coding of Covered Electrodes for Metal Arc Welding of Structural Steels (Second Revision);

14-16)      IS 8363-1976 ; Specification for Bare Wire Electrodes for Electroslag Welding of Streels;

14-17)      ISO 9453:1990 ; Soft Solder Alloys-Chemical Compositions and Forms;

14-18)      ISO 9454:1990 ; Soft Soldering Fluxes-Classification and Requirements

14-19)      ISO 9455-1: 1990 ; Soft Soldering Fluxes- Test Methods

14-20)      ISO 9455-11:1991 ; Soft Soldering Fluxes-Test Methods

14-21)      ISO 9455-14:1991 ; Soft Soldering Fluxes-Test Methods

14-22)      ISO 9455-8:1991 ; Soft Soldering Fluxes-Test Methods

 

13. Steel Fasteners

건설자재 시험 및 인증 관련 규격목록 13

13. Steel Fasteners

13-1)        ASTM A183 – 03(2009) ; Standard Specification for Carbon Steel Track Bolts and Nuts

13-2)        ASTM A193 / A193M – 09 ; Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

13-3)        ASTM A194 / A194M – 10 ; Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

13-4)        ASTM A307 – 07b ; Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

13-5)        ASTM A31 – 04(2009) ; Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

13-6)        ASTM A320 / A320M – 08 ; Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service

13-7)        ASTM A325 – 09ae1 ; Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

13-8)        ASTM A354 – 07a ; Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

13-9)        ASTM A437 / A437M – 10 ; Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

13-10)      ASTM A449 – 07b ; Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

13-11)      ASTM A489 – 04e1 ; Standard Specification for Carbon Steel Lifting Eyes

13-12)      ASTM A490 – 09 ; Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

13-13)      ASTM A502 – 03(2009) ; Standard Specification for Rivets, Steel, Structural

13-14)      ASTM A540 / A540M – 10 ; Standard Specification for Alloy-Steel Bolting for Special Applications

13-15)      ASTM A563 – 07a ; Standard Specification for Carbons and Alloy Steel Nuts

13-16)      ASTM A574 – 08 ; Standard Specification for Alloy Steel Socket-Head Cap Screws

13-17)      ASTM C1002 – 07 ; Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

13-18)      ASTM C514 – 04(2009)e1 ; Standard Specification for Nails for the Application of Gypsum Board

13-19)      ASTM C954 – 07 ; Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs

13-20)      ASTM C955 – 09a ; Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases

13-21)      ASTM F436 – 09 ; Standard Specification for Hardened Steel Washers

13-22)      ASTM F593 – 02(2008) ; Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

13-23)      ASTM F594 – 09 ; Standard Specification for Stainless Steel Nuts

13-24)      ASTM F844 – 07a ; Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

13-25)      ASTM F959 – 09 ; Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

13-26)      BDS 1373 : 1992 ; Slotted countersunk flat head tapping screws

13-27)      BDS 1374 : 1992 ; Slotted raised counter

13-28)      BDS 1375 : 1992 ; Fasteners hexagon products widths across flats

13-29)      BDS 1405:1993 ; Bolts, Screws, Nuts and Accessories Terminology and Nomenclature

13-30)      BDS 1406:1993 ; Hexagon nuts style 2 products grades A and B.

13-31)      BDS 1407:1993 ; Hexagon nuts style 3 products grades A and B.

13-32)      BDS 1408:1993 ; General purpose screw threads general plan

13-33)      BDS 1409:1993 ; General purpose screw threads selected sizes for screws, bolts and nuts

13-34)      BDS 1410:1993 ; Thread run-outs for fasteners thread of BDS 1408: 1995 and

13-35)      BDS 1411:1993 ; Tapping screws thread

13-36)      BDS 1412:1993 ; Thread undercuts of external metric thread fasteners

13-37)      BDS 1413:1993 ; Head configuration and gauging of countersunk head screws

13-38)      BDS 1428 : 1993 ; Fasteners-bolts, screws, studs and nuts-symbols and designations of dimensions