18. BUILDERS HARDWARE 건설자재 시험 및 인증 관련 규격목록 18

건설자재 시험 및 인증 관련 규격목록 18

18. BUILDERS HARDWARE

18-1)        BDS 113:1986 ; Specification for Latches and Locks for Doors in Buildings;

18-2)        IS 10019-1981 ; Specification for Steel Window Stays and Fasteners;

18-3)        IS 10090-1982 ; Specification for Numericals;

18-4)        IS 1019-1974 ; Specification for Rim Latches (Second Revision);

18-5)        IS 10342-1982 ; Specification for Curtain Rail System

18-6)        IS 12817:1997 ; Specification for stainless steel butt hinges (first revision)

18-7)        IS 12867:1989 ; Specification for PVC hand rails covers

18-8)        IS 1341-1992 ; Specification for Steel Butt Hinges (Sixth Revision);

18-9)        IS 14912:2001 ; Specification for door closers concealed type (hydraulically regulated)

18-10)      IS 1823-1980 ; Specification for Floor Door Stoppers (Third Revision);

18-11)      IS 1837-1966 ; Specification for Fanlight Pivots (First Revision);

18-12)      IS 204-1991/1992 ; Specification for Tower Bolts;

18-13)      IS 205-1992 ; Specification for Nonferrous Metal Butt Hinges (fourth Revision);

18-14)      IS 206-1992 ; Specification for Tee and Strap Hinges (Fourth Revision);

18-15)      IS 208-1996 ; Specification for Door Handles (Fifth Revision);

18-16)      IS 2209-1976 ; Specification for Mortice Locks (vertical type) (Third Revision);

18-17)      IS 2681-1993 ; Specification for Nonferrous Metal Sliding Door Bolts for Use with Padlocks (Third Revision);

18-18)      IS 281-1991 ; Specification for Mild Steel Sliding Door Bolts for Use with Padlock (Third Revision);

18-19)      IS 3564-1995 ; Specification for Door Closers (hydraulically regulated) (Second Revision);

18-20)      IS 362-1991 ; Specification for Parliament Hinges (Fifth Revision);

18-21)      IS 363-1993 ; Specification for Hasps and Staples (Fourth Revision);

18-22)      IS 364-1993 ; Specification for Fanlight Catch (Third Revision);

18-23)      IS 3818-1992 ; Specification for Continuous (piano) Hinges (Third Revision);

18-24)      IS 3828-1966 ; Specification for Ventilator Chains;

18-25)      IS 3843-1995 ; Specification for Steel Backflap Hinges; (First Revision)

18-26)      IS 3847-1992 ; Specification for Mortice Night Latches; (First Revision)

18-27)      IS 452-1973 ; Specification for Door Springs, Rat-tail Type (Second Revision);

18-28)      IS 453-1993 ; Specification for Double Acting Spring Hinges (Third Revision);

18-29)      IS 4621-1975 ; Specification for Indicating Bolts for use in Public Baths and Lavatories (First Revision);

18-30)      IS 4948-2002 ; Specification for Welded Steel Wire Fabric for General Use (Second Revision);

18-31)      IS 4992-1975 ; Specification for Door Handles for Mortice Locks (vertical type) (First Revision);

18-32)      IS 5187-1972 ; Specification for Flush Bolts (First Revision);

18-33)      IS 5899-1970 ; Specification for Bathroom Latches;

18-34)      IS 5930-1970 ; Specification for Mortice Latch (vertical type);

18-35)      IS 6315-1971 ; Specification for Floor Springs (hydraulically regulated) for Heavy Doors;

18-36)      IS 6318-1971 ; Specification for Plastic Window Stays and Fasteners;

18-37)      IS 6343-1982 ; Specification for Door Closers (pneumatically regulated) for Light Doors Weighing up to 40 kg (First Revision);

18-38)      IS 6602-1972 ; Specification for Ventilator Poles;

18-39)      IS 6607-1972 ; Specification for Rebated Mortice Locks (vertical type);

18-40)      IS 7196-1974 ; Specification for Hold Fast;

18-41)      IS 7197-1974 ; Specification for Double Action Floor Springs (without oil check) for Heavy Doors;

18-42)      IS 729-1979 ; Specification for Drawer Locks, Cupboard Locks and Box Locks (Third Revision);

18-43)      IS 7534-1985 ; Specification for sliding locking bolts for use with padlocks (first revision);

18-44)      IS 7540-1974 ; Specification for Mortice Dead Locks;

18-45)      IS 8756-1978 ; Specification for Ball Catches for use in Wooden Almirah;

18-46)      IS 8760-1978 ; Specification for Mortice Sliding Door Locks, with Lever Mechanism;

18-47)      IS 9106-1979 ; Specification for Rising Butt Hinges;

18-48)      IS 9131-1979 ; Specification for Rim Locks;

18-49)      IS 9460-1980 ; Specification Flush Drop Handle for Drawer;

18-50)      IS 9899-1981 ; Specification for Hat, Coat and Wardrobe Hooks;

 

Comments are closed.