STD-EN 8XXXX
- EN 80:2001 Wall-hung urinals – Connecting dimensions
- EN 802:1994 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings for pressure piping systems – Test method for maximum deformation by crushing
- EN 803:1994 Plastics piping systems – Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping – Test method for resistance to a short-term internal pressure without end thrust
- EN 804:1994 Plastics piping systems – Injection-moulded socket fittings for solvent-cemented joints for pressure piping – Test method for resistance to a short-term internal hydrostatic pressure
- EN 805:2000 Water supply – Requirements for systems and components outside buildings
- EN 806-1:2000 Specifications for installations inside buildings conveying water for human consumption – Part 1: General
- EN 806-1:2000/A1:2001 Specifications for installations inside buildings conveying water for human consumption – Part 1: General
- EN 806-2:2005 Specification for installations inside buildings conveying water for human consumption – Part 2: Design
- EN 806-3:2006 Specifications for installations inside buildings conveying water for human consumption – Part 3: Pipe sizing – Simplified method
- EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption – Part 4: Installation
- EN 806-5:2012 Specifications for installations inside buildings conveying water for human consumption – Part 5: Operation and maintenance
- EN 809:1998+A1:2009 Pumps and pump units for liquids – Common safety requirements
- EN 809:1998+A1:2009/AC:2010 Pumps and pump units for liquids – Common safety requirements
- EN 810:1997 Dehumidifiers with electrically driven compressors – Rating tests, marking, operational requirements and technical data sheet
- EN 81-1:1998+A3:2009 Safety rules for the construction and installation of lifts – Part 1: Electric lifts
- EN 81-2:1998+A3:2009 Safety rules for the construction and installation of lifts – Part 2: Hydraulic lifts
- EN 812:2012 Industrial bump caps
- EN 81-21:2009+A1:2012 Safety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 21: New passenger and goods passenger lifts in existing building
- EN 81-28:2003 Safety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 28: Remote alarm on passenger and goods passenger lifts
- EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts – Part 3: Electric and hydraulic service lifts
- EN 81-3:2000+A1:2008/AC:2009 Safety rules for the construction and installation of lifts – Part 3: Electric and hydraulic service lifts
- EN 813:2008 Personal fall protection equipment – Sit harnesses
- EN 81-31:2010 Safety rules for the construction and installation of lifts – Lifts for the transport of goods only – Part 31: Accessible goods only lifts
- EN 81-40:2008 Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
- EN 81-41:2010 Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
- EN 81-43:2009 Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 43: Lifts for cranes
- EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock – Safety requirements
- EN 81-58:2003 Safety rules for the construction and installation of lifts – Examination and tests – Part 58: Landing doors fire resistance test
- EN 816:1996 Sanitary tapware – Automatic shut-off valves PN 10
- EN 817:2008 Sanitary tapware – Mechanical mixing valves (PN 10) – General technical specifications
- EN 81-70:2003 Safety rules for the construction and installations of lifts – Particular applications for passenger and good passengers lifts – Part 70: Accessibility to lifts for persons including persons with disability
- EN 81-70:2003/A1:2004 Safety rules for the construction and installations of lifts – Particular applications for passenger and good passengers lifts – Part 70: Accessibility to lifts for persons including persons with disability
- EN 81-71:2005+A1:2006 Safety rules for the construction and installation of lifts – Particular applications to passenger lifts and goods passenger lifts – Part 71: Vandal resistant lifts
- EN 81-72:2003 Safety rules for the construction and installation of lifts – Particular applications for passenger and goods passenger lifts – Part 72: Firefighters lifts
- EN 81-73:2005 Safety rules for the construction and installation of lifts – Particular applications for passenger and goods passenger lifts – Part 73: Behaviour of lifts in the event of fire
- EN 81-80:2003 Safety rules for the construction and installation of lifts – Existing lifts – Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts
- EN 818-1:1996+A1:2008 Short link chain for lifting purposes – Safety – Part 1: General conditions of acceptance
- EN 818-2:1996+A1:2008 Short link chain for lifting purposes – Safety – Part 2: Medium tolerance chain for chain slings – Grade 8
- EN 81-82:2013 Safety rules for the construction and installation of lifts – Existing lifts – Part 82: Rules for the improvement of the accessibility of existing lifts for persons including persons with disability
- EN 818-3:1999+A1:2008 Short link chain for lifting purposes – Safety – Part 3: Medium tolerance chain for chain slings – Grade 4
- EN 818-4:1996+A1:2008 Short link chain for lifting purposes – Safety – Part 4: Chain slings – Grade 8
- EN 818-5:1999+A1:2008 Short link chain for lifting purposes – Safety – Part 5: Chain slings – Grade 4
- EN 818-6:2000+A1:2008 Short link chain for lifting purposes – Safety – Part 6: Chain slings – Specification for information for use and maintenance to be provided by the manufacturer
- EN 818-7:2002+A1:2008 Short link chain for lifting purposes – Safety – Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
- EN 820-1:2002 Advanced technical ceramics – Methods of testing monolithic ceramics – Thermonechanical properties – Part 1: Determination of flexural strength at elevated temperatures
- EN 820-2:2003 Advanced technical ceramics – Methods of testing monolithic ceramics – Thermo-mechanical properties – Part 2: Determination of self-loaded deformation
- EN 820-3:2004 Advanced technical ceramics – Methods of testing monolithic ceramics – Thermomechanical properties – Part 3: Determination of resistance to thermal shock by water quenching
- EN 820-4:2009 Advanced technical ceramics – Thermomechanical properties of monolithic ceramics – Part 4: Determination of flexural creep deformation at elevated temperatures
- EN 820-5:2009 Advanced technical ceramics – Thermomechanical properties of monolithic ceramics – Part 5: Determination of elastic moduli at elevated temperatures
- EN 821-1:1995 Advanced technical ceramics – Monolithic ceramics – Thermo-physical properties – Part 1: Determination of thermal expansion
- EN 821-2:1997 Advanced technical ceramics – Monolithic ceramics – Thermo-physical properties – Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
- EN 821-3:2005 Advanced technical ceramics – Monolithic ceramics. Thermo-physical properties – Part 3: Determination of specific heat capacity
- EN 822:2013 Thermal insulating products for building applications – Determination of length and width
- EN 823:2013 Thermal insulating products for building applications – Determination of thickness
- EN 824:2013 Thermal insulating products for building applications – Determination of squareness
- EN 825:2013 Thermal insulating products for building applications – Determination of flatness
- EN 826:2013 Thermal insulating products for building applications – Determination of compression behaviour
- EN 827:2005 Adhesives – Determination of conventional solids content and constant mass solids content
- EN 828:2013 Adhesives – Wettability – Determination by measurement of contact angle and surface free energy of solid surface
- EN 834:2013 Heat cost allocators for the determination of the consumption of room heating radiators – Appliances with electrical energy supply
- EN 835:1994 Heat cost allocators for the determination of the consumption of room heating radiators – Appliances without an electrical energy supply, based on the evaporation principle
- EN 837-1:1996 Pressure gauges – Part 1: Bourdon tube pressure gauges – Dimensions, metrology, requirements and testing
- EN 837-1:1996/AC:1998 Pressure gauges – Part 1: Bourdon tube pressure gauges – Dimensions, metrology, requirements and testing
- EN 837-2:1997 Pressure gauges – Part 2: Selection and installation recommendations for pressure gauges
- EN 837-3:1996 Pressure gauges – Part 3: Diaphragm and capsule pressure gauges – Dimensions, metrology, requirements and testing
- EN 838:2010 Workplace exposure – Procedures for measuring gases and vapours using diffusive samplers – Requirements and test methods
- EN 84:1997 Wood preservatives – Accelerated ageing of treated wood prior to biological testing – Leaching procedure
- EN 840-1:2012 Mobile waste and recycling containers – Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices – Dimensions and design
- EN 840-2:2012 Mobile waste and recycling containers – Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices – Dimensions and design
- EN 840-3:2012 Mobile waste and recycling containers – Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices – Dimensions and design
- EN 840-4:2012 Mobile waste and recycling containers – Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices – Dimensions and design
- EN 840-5:2012 Mobile waste and recycling containers – Part 5: Performance requirements and test methods
- EN 840-6:2012 Mobile waste and recycling containers – Part 6: Safety and health requirements
- EN 841:1995 Bar coding – Symbology specifications – Format Description
- EN 842:1996+A1:2008 Safety of machinery – Visual danger signals – General requirements, design and testing
- EN 843-1:2006 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 1: Determination of flexural strength
- EN 843-2:2006 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 2: Determination of Young’s modulus, shear modulus and Poisson’s ratio
- EN 843-3:2005 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests
- EN 843-4:2005 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 4: Vickers, Knoop and Rockwell superficial hardness
- EN 843-5:2006 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 5: Statistical analysis
- EN 843-6:2009 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 6: Guidance for fractographic investigation
- EN 843-7:2010 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 7: C-ring tests
- EN 843-8:2010 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 8: Guidelines for conducting proof tests
- EN 844-1:1995 Round and sawn timber – Terminology – Part 1: General terms common to round timber and sawn timber
- EN 844-10:1998 Round and sawn timber – Terminology – Part 10: Terms relating to stain and fungal attack
- EN 844-11:1998 Round and sawn timber – Terminology – Part 11: Terms relating to degrade by insects
- EN 844-12:2000 Round and sawn timber – Terminology – Part 12: Additional terms and general index
- EN 844-2:1997 Round and sawn timber – Terminology – Part 2: General terms relating to round timber
- EN 844-3:1995 Round and sawn timber – Terminology – Part 3: General terms relating to sawn timber
- EN 844-4:1997 Round and sawn timber – Terminology – Part 4: Terms relating to moisture content
- EN 844-5:1997 Round and sawn timber – Terminology – Part 5: Terms relating to dimensions of round timber
- EN 844-6:1997 Round and sawn timber – Terminology – Part 6: Terms relating to dimensions of sawn timber
- EN 844-7:1997 Round and sawn timber – Terminology – Part 7: Terms relating to anatomical structure of timber
- EN 844-8:1997 Round and sawn timber – Terminology – Part 8: Terms relating to features of round timber
- EN 844-9:1997 Round and sawn timber – Terminology – Part 9: Terms relating to features of sawn timber
- EN 845-1:2013 Specification for ancillary components for masonry – Part 1: Wall ties, tension straps, hangers and brackets
- EN 845-2:2013 Specification for ancillary components for masonry – Part 2: Lintels
- EN 845-3:2013 Specification for ancillary components for masonry – Part 3: Bed joint reinforcement of steel meshwork
- EN 846-10:2000 Methods of test for ancillary components for masonry – Part 10: Determination of load capacity and load deflection characteristics of brackets
- EN 846-11:2000 Methods of test for ancillary components for masonry – Part 11: Determination of dimensions and bow of lintels
- EN 846-13:2001 Methods of test for ancillary components for masonry – Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings
- EN 846-14:2012 Methods of test for ancillary components for masonry – Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
- EN 846-2:2000 Methods of test for ancillary components for masonry – Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
- EN 846-3:2000 Methods of test for ancillary components for masonry – Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement
- EN 846-4:2001 Methods of test for ancillary components for masonry – Part 4: Determination of load capacity and load-deflection characteristics of straps
- EN 846-4:2001/A1:2004 Methods of test for ancillary components for masonry – Part 4: Determination of load capacity and load-deflection characteristics of straps
- EN 846-5:2012 Methods of test for ancillary components for masonry – Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
- EN 846-6:2012 Methods of test for ancillary components for masonry – Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
- EN 846-7:2012 Methods of test for ancillary components for masonry – Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
- EN 846-8:2000 Methods of test for ancillary components for masonry – Part 8: Determination of load capacity and load-deflection characteristics of joist hangers
- EN 846-8:2000/A1:2006 Methods of test for ancillary components for masonry – Part 8: Determination of load capacity and load-deflection characteristics of joist hangers
- EN 846-9:2000 Methods of test for ancillary components for masonry – Part 9: Determination of flexural resistance and shear resistance of lintels
- EN 847-1:2013 Tools for woodworking – Safety requirements – Part 1: Milling tools, circular saw blades
- EN 847-2:2013 Tools for woodworking – Safety requirements – Part 2: Requirements for the shank of shank mounted milling
- EN 847-3:2013 Tools for woodworking – Safety requirements – Part 3: Clamping devices
- EN 848-1:2007+A2:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 1: Single spindle vertical moulding machines
- EN 848-2:2007+A2:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 2: Single spindle hand fed/integrated fed routing machines
- EN 848-3:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 3: Numerically controlled (NC) boring and routing machines
- EN 851:1995 Aluminium and aluminium alloys – Circle and circle stock for the production of culinary utensils – Specifications
- EN 853:1996 Rubber hoses and hose assemblies – Wire braid reinforced hydraulic type – Specification
- EN 853:1996/AC:2007 Rubber hoses and hose assemblies – Wire braid reinforced hydraulic type – Specification
- EN 854:1996 Rubber hoses and hose assemblies – Textile reinforced hydraulic type – Specification
- EN 855:1996 Plastics hoses and hose assemblies – Thermoplastics textile reinforced hydraulic type – Specification
- EN 856:1996 Rubber hoses and hose assemblies – Rubber-covered spiral wire reinforced hydraulic type – Specification
- EN 857:1996 Rubber hoses and hose assemblies – Wire braid reinforced compact type for hydraulic applications – Specification
- EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) – Part 1: Principles of product design, performance and testing, marking and quality control
- EN 858-1:2002/A1:2004 Separator systems for light liquids (e.g. oil and petrol) – Part 1: Principles of product design, performance and testing, marking and quality control
- EN 858-2:2003 Separator systems for light liquids (e.g. oil and petrol) – Part 2: Selection of nominal size, installation, operation and maintenance
- EN 859:2007+A2:2012 Safety of woodworking machines – Hand fed surface planing machines
- EN 860:2007+A2:2012 Safety of woodworking machines – One side thickness planing machines
- EN 861:2007+A2:2012 Safety of woodworking machines – Surface planing and thicknessing machines
- EN 862:2005 Packaging – Child-resistant packaging – Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
- EN 863:1995 Protective clothing – Mechanical properties – Test method: Puncture resistance
- EN 867-5:2001 Non-biological systems for use in sterilizers – Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S
- EN 868-10:2009 Packaging for terminally sterilized medical devices – Part 10: Adhesive coated nonwoven materials of polyolefines – Requirements and test methods
- EN 868-2:2009 Packaging for terminally sterilized medical devices – Part 2: Sterilization wrap – Requirements and test methods
- EN 868-3:2009 Packaging for terminally sterilized medical devices – Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) – Requirements and test methods
- EN 868-4:2009 Packaging for terminally sterilized medical devices – Part 4: Paper bags – Requirements and test methods
- EN 868-5:2009 Packaging for terminally sterilized medical devices – Part 5: Sealable pouches and reels of porous materials and plastic film construction – Requirements and test methods
- EN 868-6:2009 Packaging for terminally sterilized medical devices – Part 6: Paper for low temperature sterilization processes – Requirements and test methods
- EN 868-7:2009 Packaging for terminally sterilized medical devices – Part 7: Adhesive coated paper for low temperature sterilization processes – Requirements and test methods
- EN 868-8:2009 Packaging for terminally sterilized medical devices – Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 – Requirements and test methods
- EN 868-9:2009 Packaging for terminally sterilized medical devices – Part 9: Uncoated nonwoven materials of polyolefines – Requirements and test methods
- EN 869:2006+A1:2009 Safety of machinery – Safety requirements for pressure metal diecasting units
- EN 872:2005 Water quality – Determination of suspended solids – Method by filtration through glass fibre filters
- EN 877:1999 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
- EN 877:1999/A1:2006 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
- EN 877:1999/A1:2006/AC:2008 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
- EN 878:2004 Chemicals used for treatment of water intended for human consumption – Aluminium sulfate
- EN 881:2004 Chemicals used for treatment of water intended for human consumption – Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric)
- EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances – Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
- EN 882:2004 Chemicals used for treatment of water intended for human consumption – Sodium aluminate
- EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances – Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
- EN 883:2004 Chemicals used for treatment of water intended for human consumption – Polyaluminium chloride hydroxyde and polyaluminium chloride hydroxyde sulfate
- EN 885:2004 Chemicals used for treatment of water intended for human consumption – Polyaluminium chloride hydroxide silicate
- EN 886:2004 Chemicals used for treatment of water intended for human consumption – Polyaluminium hydroxide silicate sulfate
- EN 887:2004 Chemicals used for treatment of water intended for human consumption – Aluminium iron (III) sulfate
- EN 888:2004 Chemicals used for treatment of water intended for human consumption – Iron (III) chloride
- EN 889:2004 Chemicals used for treatment of water intended for human consumption – Iron (II) sulfate
- EN 89:1999 Gas-fired storage water heaters for the production of domestic hot water
- EN 89:1999/A1:1999 Gas-fired storage water heaters for the production of domestic hot water
- EN 89:1999/A2:2000 Gas-fired storage water heaters for the production of domestic hot water
- EN 89:1999/A3:2006 Gas-fired storage water heaters for the production of domestic hot water
- EN 89:1999/A4:2006 Gas-fired storage water heaters for the production of domestic hot water
- EN 890:2012 Chemicals used for treatment of water intended for human consumption – Iron (III) sulfate solution
- EN 891:2004 Chemicals used for treatment of water intended for human consumption – Iron (III) chloride sulfate
- EN 892:2012 Mountaineering equipment – Dynamic mountaineering ropes – Safety requirements and test methods
- EN 893:2010 Mountaineering equipment – Crampons – Safety requirements and test methods
- EN 894-1:1997+A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 1: General principles for human interactions with displays and control actuators
- EN 894-2:1997+A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 2: Displays
- EN 894-3:2000+A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 3: Control actuators
- EN 894-4:2010 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 4: Location and arrangement of displays and control actuators
- EN 896:2012 Chemicals used for treatment of water intended for human consumption – Sodium hydroxide
- EN 897:2012 Chemicals used for treatment of water intended for human consumption – Sodium carbonate
- EN 898:2012 Chemicals used for treatment of water intended for human consumption – Sodium hydrogen carbonate
- EN 899:2009 Chemicals used for treatment of water intended for human consumption – Sulphuric acid
