Environmental Test (Military & 광고 방송)

Environmental TEST 다운받기

환경시험 (군수용 및 민수용)

환경관련 성능시험은 다음을 포함합니다. 일반적으로 이러한 시험은 군수용 및 민수용으로 대별되어 시험대상의 성능적 요구사항의 충족을 입증하기 위해 수행됩니다.

Altitude

  • ASTM D4169 ; Standard Practice for Performance Testing of Shipping Containers and System
  • DEF STAN 00-35, Part 3, Issue 4:2006:
  • Chapter 3-09 Test CL9 – Rapid and Explosive Decompression;
  • GR-63-CORE, Issue 1 Paragraph 4.1 과 5.1;
  • GR-63-CORE, Issue 2, 3 Paragraph 4.1.3 과 5.1.3;
  • IEC 60721-4-1:2001+A1:03 . Low air pressure;
  • IEC 60721-4-2:2001+A1:03 . Low air pressure;
  • IEC 60721-4-3:2001+A1:03 . Low air pressure;
  • IEC 60721-4-4:2001+A1:03 . Low air pressure;
  • IEC 60721-4-7:2001+A1:03 . Low air pressure;
  • IEC 60601-1-11;
  • IEC 60721-3-2;
  • JSS 55555:2000 Rev.3 Test Number 3;
  • ISO 10236 Part 9;
  • ISO 14708-1:2000(그것);
  • MIL-B-49430C (ER) Paragraph 4.8.7;
  • MIL-B-49458C (ER) Paragraph 4.7.7;
  • MIL-PRF-49471B (CR) Paragraph 4.7.7;
  • MIL-STD-202F Method 105C, Conditions A, B, C, and F;
  • MIL-STD-202G Method 105C, Conditions A, B, C, and F;
  • MIL-STD-810C Method 500.1, Procedures I and II;
  • MIL-STD-810D Method 500.2, Procedures I and II;
  • MIL-STD-810E Method 500.3, Procedures I and II;
  • MIL-STD-810F Method 500.4, Procedures I and II;
  • MIL-STD-810G Method 500.5 Procedures I, II, and III;
  • RTCA DO-160D, 그것, F, G Section 4, Paragraph 4.6.1, Category Ax, Bx, Cx, Dx, Ex, Fx;
  • UN Transport of Dangerous Goods, Test T.1

Temperature/Altitude

  • DEF STAN 00-35, Part 3, Issue 4:2006:
  • Chapter 3-11 Test CL11 – High Temperature – Low Pressure,
  • Chapter 3-12 Test CL12 – Low Temperature – Low Pressure Test,
  • Chapter 3-13 Test CL13 – Low Temperature – Low Pressure – High Humidity;
  • MIL-STD-810C Method 504.1, Procedure I;
  • MIL-STD-810D Method 520.0, Procedure I;
  • MIL-STD-810E Method 520.1, Procedure I;
  • MIL-STD-810F Method 520.2, Procedure I;
  • MIL-STD-810G Method 520.3, Procedure I;
  • RTCA DO-160D, 그것, G Section 4

Bench Handling

  • MIL-STD-810C Method 516.2, Procedure V;
  • MIL-STD-810D Method 516.3, Procedure VI;
  • MIL-STD-810E Method 516.4, Procedure VI;
  • MIL-STD-810F Method 516.5, Procedure VI;
  • MIL-STD-810G Method 516.6, Procedure VI

Bounce (Loose Cargo Vibration)

  • ASTM D999, D999-96 (Method A2), D4169-14;
  • IEC 68-2-55, IEC 60068-2-55, Test Ee;
  • ISTA 1A-2014, ISTA 2A-2011, ISTA 3A-2008;
  • JSS 55555:2000 Rev.2 Test Number 4;
  • MIL-STD-810C Method 514.2, Procedure IX Part 2, X, and XI;
  • MIL-STD-810D Method 514.3, Category 3, Procedure II;
  • MIL-STD-810E Method 514.4, Category 3, Procedure III;
  • MIL-STD-810F Method 514.5, Category 5, Procedure II;
  • MIL-STD-810G Method 514.6 Category 5, Procedure II

Compression, Stacking

  • ASTM D642, D4169, D7386-12;
  • GR-63 Core;
  • ISTA 2A-2011

Drop & Topple

  • DEF STAN 00-35, Part 3, Issue 4:2006;
  • ETSI EN 300 019-2-77:2003-04;
  • IEC 68-2-31, IEC 60068-2-31, Test Ec;
  • IEC 68-2-31, IEC 60068-2-31 amm-1982: Test Ec;
  • IEC 60721-4-7:2001+A1:03 – Drop and Topple;
  • IEC 60721-4-2:2001+A1: 03 – Drop and Topple;
  • ISTA 2A-2011;
  • JSS 55555:2000 Rev. 2 Test Number 26;
  • QM-333 Paragraph 13.0, Categories A, B, C, D

Drop Test

  • ASTM D1083, D1083-91 Paragraph 10, 11, 12, 13;
  • ASTM 5276, ASTM 5276-98; ASTM D7386-12
  • IN 50130 섹션 21 Free Fall (Operational);
  • IN 50130:1999 섹션 21 Free Fall (Operational);
  • GR-63-CORE, Paragraph 5.3.1, Category A & B;
  • GR-63-CORE, Paragraph 5.3.2;
  • IEC 68-2-32, IEC 60068-2-32: Test Ed, Free Fall;
  • IEC 60601-1-11;
  • IEC 60721-3-2;
  • MIL-B-49430C (ER), Paragraph 4.8.3;
  • MIL-PRF-49471B (CR), Paragraph 3.10;
  • MIL-STD-810C Method 516.2 Procedure II;
  • MIL-STD-810D Method 516.3 Procedures III and IV;
  • MIL-STD-810E Method 516.4 Procedures III and IV;
  • MIL-STD-810F Method 516.5 Procedure IV;
  • MIL-STD-810G Method 516.6 Procedure IV;
  • MIL-STD-1344A Method 2015;
  • ISO 10651-3 Lung Ventilators Medical Use Part 3 섹션 4: Protection against mechanical hazards;
  • BMW Group GS95003-1;
  • BS EN 50130-5:1999 Alarm Systems Part 5: Environmental Test Methods DEF STAN 00-35, Part 3, Issue 4:2006;
  • ISTA 1A-2014; Packaged-Products 150lb(68Kg) or Less
  • ISTA 2A-2011; Packaged-Products 150lb(68Kg) or Less
  • ISTA 3A-2008; Packaged-Products for Parcel Delivery System Shipment 68 lb( 68 Kg) or Less

    시험 절차 3A는 배송시스템을 통하여 선적되는 개별 포장물에 대한 일반적인 모의 시험이다.
    이 시험은 항공 또는 지상으로으로 배송되는 일반적으로 개별 패키지로 4가지 다른 유형에 대해 적합합니다.
    시험대상의 유형은
    표준, 소형, 평판평, 장대형으로 나눠진다.

  • ASTM D4169-14;
  • IS 10236 Part 15;
  • ISO 14708-1:2000(그것)

Fire, Flammability

  • GR-63 Core;
  • RTCA/DO-160E, F, G Section 26;
  • UL-94

Immersion

  • IEC 60529, Temporary Immersion IPx7, IPx8;
  • IEC 60529-2001 COR 1 2003, Temporary Immersion IPx7 Paragraph 14.2.7;
  • IEC 60529-2001 COR 1 2003, Continuous Immersion IPx8 Paragraph 14.2.8;
  • ISO 20653 Degrees of protection (IP-Code);
  • ISO 20653: 2006 Degrees of protection (IP-Code), IPx7, IPx8;
  • JSS 55555:2000 Rev. 2 Test Number 19;
  • MIL-DLT-62547C(AT);
  • MIL-STD-810C Method 512.1, Procedure I and IV;
  • MIL-STD-810D Method 512.2, Procedure I;
  • MIL-STD-810E Method 512.3, Procedure I;
  • MIL-STD-810F Method 512.4, Procedure I;
  • MIL-STD-810G Method 512.6, Procedure I

Mechanical Shock

  • ASTM D4169-14, Schedule J- Concentrated Impact (Test Method D6344);
  • BMW Group GS95003-1;
  • BS EN 50130-5:1999 Alarm Systems Part 5: Environmental Test Methods;
  • DEF STAN 00-35, Part 3, Issue 4:2006;
  • ETSI 300-019-2-1, 2, 3, 4, 5, 6, 7, 8;
  • GM 9123P;
  • IEC 68-2-27, IEC 60068-2-27:Test Ea;
  • IEC 68-2-29, IEC 60068-2-29:Test Eb;
  • IEC 60601-1-11;
  • IEC 60721-4-1:2001+A1:03 – Shock;
  • IEC 60721-4-2:2001+A1:03 – Shock;
  • IEC 60721-4-3:2001+A1:03 – Shock;
  • IEC 60721-4-4:2001+A1:03 – Shock;
  • IEC 60721-4-7:2001+A1:03 – Shock;
  • IEC 60601-1-11;
  • IEC 60068-2-75 – Hammer Tests;
  • IEC 62262 (IN 62262, IK ratings) – Impact;
  • IS 10236 Part 10 – Bump, IS 10236 Part 12 – Shock;
  • ISO 10651-3 Lung Ventilators Medical Use Part 3 섹션 4: Protection against
  • mechanical hazards;
  • ISTA 1A-2014, ISTA 2A-2011, ISTA 3A-2008;
  • JEDEC Standard JESD22-B104C;
  • JSS 55555:2000 Rev. 2 Test Number 4, 24;
  • MIL-B-49430, Paragraph 4.8.5;
  • MIL-B-49458C (ER), Paragraph 4.7.5;
  • MIL-DLT-62547C(AT);
  • MIL-PRF-49471B (CR), Paragraph 3.9;
  • MIL-STD-202F Method 213B, Conditions A, B, C, D, 그것, F, 지,H, I, J, and K;
  • MIL-STD-202G Method 213B, Conditions A, B, C, D, 그것, F, 지,H, I, J, and K;
  • MIL-STD-810C Method 516.2, Procedures I, III, IV, and VI;
  • MIL-STD-810D Method 516.3, Procedures I, II, V, and VIII,
  • MIL-STD-810E Method 516.4, Procedures I, II, V, and VIII;
  • MIL-STD-810F Method 516.5, Procedures I, II, III, V, and VIII;
  • MIL-STD-810G Method 516.6 Procedures I, II, III, V, and VIII;
  • MIL-STD-883A Method 2002.1, Condition A;
  • MIL-STD-883E Method 2002.3, Condition A;
  • MIL-STD-883F Method 2002.4, Condition A;
  • MIL-STD-883G Method 2002.5, Condition A;
  • MIL-STD-883H Method 2002.6, Condition A;
  • MIL-STD-883J Method 2002.7, Condition A;
  • MIL-STD-1344A Method 2004.1, Conditions A, B, C, 그것, F, 지, H, and I;
  • MIL-STD-1344A Method 2004.1, Conditions A, B, C, 그것, F, 지, H and I;
  • RTCA DO-160D, 160E Section 7, Paragraphs 7.2.1, 7.2.2, Operational;
  • RTCA DO-160D Section 7, Paragraphs 7.3.1, 7.3.1.1, Crash Safety;
  • RTCA DO-160E, 160F, 160G Section 7, Paragraphs 7.3.1, 7.3.2, Crash Safety;
  • UL-1642 4ED Rev August 2006, Paragraph 14A

Rain (Water Test)

  • BS EN 50130-5:1999 Alarm Systems Part 5: Environmental Test Methods
  • DEF STAN 00-35, Part 3, Issue 4:2006 Chapter 3-27;
  • DEF STAN 00-35, Part 3, Issue 4:2006 Chapter 3-28;
  • IEC 68-2-18, IEC 60068-2-18 Test Rb2;
  • IEC 60721-4-1:2001+A1:03 – Rain;
  • IEC 60721-4-2:2001+A1:03 – Rain;
  • IEC 60721-4-3:2001+A1:03 – Rain;
  • IEC 60721-4-4:2001+A1:03 – Rain;
  • IEC 60721-4-7:2001+A1:03 – Rain;
  • IEC 60529-2001 -02, Protection Against Water;
  • IEC 60529 IPX1 Vertically Dripping;
  • IEC 60529 IPX2 Dripping (150 tilted);
  • IEC 60529 IPX3 Spraying;
  • IEC 60529 IPX4 Splashing;
  • IEC 60529 IPX5 Jetting;
  • IEC 60529 IPX6 Powerful Jetting;
  • IEC 60529 IPX7 Immersion;
  • IEC 60529 IPX8 Immersion;
  • IEC 60529 IPX9 Resist Ingress of High Temperature (Steam)/High Pressure Water;
  • IS 10236 Part 14 – Driving Rain;
  • JSS 55555:2000 Rev.2 Test Number 11,12,16;
  • MIL-DLT-62547C(AT);
  • MIL-STD-810C Method 506.2, Procedures I and II;
  • MIL-STD-810D Method 506.3, Procedures I and II;
  • MIL-STD-810E Method 506.4, Procedures I and III;
  • MIL-STD-810F Method 506.5, Procedures I and III;
  • MIL-STD-810G Method 506.6, Procedures I and III;
  • MIL-STD-108, Splashproof;
  • MIL-STD-108E, Splashproof Paragraph 4.9;
  • RTCA DO-160D,그것,F,G Section 10;
  • MIL-STD-108, Splashproof;
  • MIL-STD-108E, Splashproof Paragraph 4.9;
  • RTCA DO-160D,그것,F,G Section 10;

Contamination by Fluids

  • MIL-STD-108, Splashproof;
  • MIL-STD-108E, Splashproof Paragraph 4.9;
  • RTCA DO-160D,그것,F,G Section 10;

Explosive Atmosphere Method 511 섹션 9 Explosive proofness Test

  • MIL-STD 810B:67Method 511;
  • MIL-STD 810C:75Method 511;
  • MIL-STD 810D:83Method 511;
  • MIL-STD 810E:89 Method 511;
  • MIL-STD 810F:00 Method 511;
  • MIL-STD 810G:08 Method 511;
  • RTCA/ DO-160C Section 9;
  • RTCA/DO-160D:97+CHG1:00+ CHG2:01+ CHG3:02 섹션 9;
  • RTCA/DO-160E:04 섹션 9;
  • RTCA/DO-160F:07 섹션 9;
  • RTCA/DO-160G:10 섹션 9

Icing

  • DEF STAN 00-35, Part 3, Issue 4:2006 Chapter 4-04 Test CN4;
  • JSS 55555:2000 Rev.2 Test Number 18;
  • MIL-STD 810 D,그것,F,G Method 521;
  • RTCA/DO-160 C, D, 그것, F,G Section 24

Warehouse Stacking and Vehicle Stacking (Compression)

  • ASTM D4169-14;
  • IEC 60721-4-1:2001+A1:03 – Static Load;
  • ISTA 2A-2011

Salt Fog (Spray)

  • ASTM B117, B117-97, B117-2003;
  • BS EN 50130-5:1999 Alarm Systems Part 5: Environmental Test Methods;
  • DEF STAN 00-35, Part 3, Issue 4:2006 Chapter 4-02 Test CN2;
  • DET NORSKE VERITAS (DNV) STANDARD FOR CERTIFICATION NO. 2.4 : ENVIRONMENTAL TEST SPECIFICATIONFOR INSTRUMENTATION AND AUTOMATION EQUIPMENT (April 2006);
  • GM 9123P;
  • GMW 14872;
  • IEC 68-2-11, Test Ka, Salt Fog, Corrigendum 1999;
  • IEC 68-2-52, IEC 60068-5-52, Test Kb Salt Fog, Cyclic;
  • IS 10236 Part 6;
  • ISO 9227;
  • JSS 55555:2000 Rev. 2 Test Number 9;
  • MIL-C-83733;
  • MIL-C-5541E Class: 1A and 3;
  • MIL-DLT-62547C(AT);
  • MIL-STD-202F Method 101D, Conditions A and B;
  • MIL-STD-202G Method 101E, Conditions A and B;
  • MIL-STD-810C Method 509.1;
  • MIL-STD-810D Method 509.2;
  • MIL-STD-810E Method 509.3;
  • MIL-STD-810F Method 509.4;
  • MIL-STD-810G Method 509.5;
  • MIL-STD-883E Method 1009.8, Conditions A, B, C and F;
  • MIL-STD-883F Method 1009.8, Conditions A, B, C and F;
  • MIL-STD-883G Method 1009.8, Condition A, B, C and F;
  • MIL-STD-883H Method 1009.8, Condition A, B, C and F;
  • MIL-STD-883J Method 1009.8, Condition A, B, C and F;
  • MIL-STD-1344A Method 1001.1, Conditions A, B, C and D;
  • RTCA DO-160D, 그것, F, G Section 14

Temperature

  • ASTM D4169-14;
  • BS EN 50130-5:1999 Alarm Systems Part 5: Environmental Test Methods; Chapter 3-14 Test CL14 – Thermal Shock and Rapid Rate of Change of Temperature;
  • DEF STAN 00-35, Part 3, Issue 4:2006;
  • DET NORSKE VERITAS (DNV) STANDARD FOR CERTIFICATION NO. 2.4: ENVIRONMENTAL TEST SPECIFICATIONFOR INSTRUMENTATION ANDAUTOMATION EQUIPMENT (April 2006);
  • EIA/JEDEC Standard EIA/JESD22-A104-B;
  • IN 50130-5 섹션 8 Dry Heat (Operational);
  • IN 50130-5:1999 섹션 8 Dry Heat (Operational);
  • IN 50130-5:1999 섹션 9 Dry Heat (Endurance);
  • IN 50130-5:1999 섹션 10 Cold (Operational);
  • IN 50130-5:1999 섹션 11 Temperature Change (Operational);
  • ETSI 300-019-2-1,2,3,4,5,6,7,8;
  • GM 9123P;
  • GR-63-CORE, Paragraph 5.1.1.1, Low Temperature;
  • GR-63-CORE, Paragraph 5.1.1.2, High Temperature;
  • GR-1221-CORE, Paragraph 6.2.4, High Temperature;
  • GR-1221-CORE, Paragraph 6.2.6, Low Temperature;
  • GR-1221-CORE, Paragraph 6.2.7, Thermal Shock;
  • IEC 68-2-1, IEC 60068-2-1, Test Aa, Ab, Ac, and Ad, Low Temperature;
  • IEC 68-2-2, IEC 60068-2-2, Test Ba, Bb, Bc and Bd, High Temperature;
  • IEC 68-2-14, IEC 60068-2-14, Test Na, Nb and Nc, Temperature Cycling;
  • IEC 60721-4-1:2001+A1:03 – Low Temperature;
  • IEC 60721-4-1:2001+A1:03 – High Temperature;
  • IEC 60721-4-1:2001+A1:03 – Temperature cycle;
  • IEC 60721-4-2:2001+A1:03 – Low Temperature;
  • IEC 60721-4-2:2001+A1:03 – High Temperature;
  • IEC 60721-4-2:2001+A1:03 – Temperature cycle;
  • IEC 60721-4-3:2001+A1:03 – Low Temperature;
  • IEC 60721-4-3:2001+A1:03 – High Temperature;
  • IEC 60721-4-3:2001+A1:03 – Temperature cycle;
  • IEC 60721-4-4:2001+A1:03 – Low Temperature;
  • IEC 60721-4-4:2001+A1:03 – High Temperature;
  • IEC 60721-4-4:2001+A1:03 – Temperature cycle;
  • IEC 60721-4-7:2001+A1:03 – Low Temperature;
  • IEC 60721-4-7:2001+A1:03 – High Temperature;
  • IEC 60721-4-7:2001+A1:03 – Temperature cycle;
  • IEC 60721-3-2;
  • IEC 60601-1-11;
  • IS 10236 Part 2 – Dry Heat;
  • IS10236 Part 3 – Cold;
  • IS 10236 Part 8 – Thermal Shock;
  • ISO 14708-1:200 (그것);
  • ISTA 1A-2014, ISTA 2A-2011, ISTA 3A-2008;
  • JSS 55555:2000 Rev. 2 Test Number 13, 20, 22;
  • MIL-DLT-62547C(AT);
  • MIL-STD-202F Method 107D, Conditions A, A-1, A-2, A-3, B, B-1, B-2, B-3, F, F-1, F-2, and F-3, Thermal Shock;
  • MIL-STD-202G Method 107G, Conditions A, A-1, A-2, A-3, B, B-1, B-2, B-3, F, F-1, F-2, and F-3, Thermal Shock;
  • MIL-STD-202F, G Method 108A, High Temperature;
  • MIL-STD-810C Method 501.1, Procedure I, High Temperature;
  • MIL-STD-810C Method 501.1, Procedure II, Temperature Cycling;
  • MIL-STD-810C Method 502.1, Procedure I, II, III Low Temperature;
  • MIL-STD-810C Method 503.1, Procedure I, Thermal Shock;
  • MIL-STD-810D Method 501.2, Procedure I, II High Temperature;
  • MIL-STD-810D Method 502.2, Procedure I, II, III Low Temperature;
  • MIL-STD-810D Method 503.2, Procedure I, Thermal Shock;
  • MIL-STD-810E Method 501.3, Procedure I, II High Temperature;
  • MIL-STD-810E Method 502.3, Procedure I, II Low Temperature;
  • MIL-STD-810E Method 502.3, Procedure III, Low Temperature;
  • MIL-STD-810E Method 503.3, Procedure I, Thermal Shock;
  • MIL-STD-810F Method 501.4, Procedure I, II High Temperature;
  • MIL-STD-810F Method 502.4, Procedure I, II, III Low Temperature;
  • MIL-STD-810F Method 503.4, Procedure I, II Thermal Shock;
  • MIL-STD-810G Method 503.5, Procedure I, II Thermal Shock;
  • MIL-STD-810G Method 501.5, Procedure I, II High Temperature;
  • MIL-STD-810G Method 502.5, Procedure I, II, III Low Temperature;
  • MIL-STD-883E, F, 지, H Method 1010.7, Condition A, B, C, and F, Thermal Shock;
  • RTCA DO-160D, 그것, F, G Section 4 과 5;
  • TIA/EIA 455-4C, High Temperature

 

Solar Radiation (Sunshine)

 

  • ASTM G154-12a;
  • BS EN 50130-5:11;
  • BS EN 50130-5:1999 Alarm Systems Part 5 : Environmental Test Methods;
  • MIL-STD-810C, D, 그것, F, G Method 505.1, Procedure I;
  • MIL-STD-810C, D, 그것, F, G Method 505.1, Procedure II;
  • IEC 60068-2-5:75; Part 2-5: 테스트 – Test Sa;
  • IEC 60068-2-5:10;
  • IEC 60721-4-1:2001+A1:03 – Solar Radiation;
  • IEC 60721-4-2:2001+A1:03 – Solar Radiation;
  • IEC 60721-4-3:2001+A1:03 – Solar Radiation;
  • IEC 60721-4-4:2001+A1:03 – Solar Radiation;
  • IEC 60721-4-7:2001+A1:03 – Solar Radiation;
  • IS 10236 Part 16;
  • JSS 55555:2000 Rev.2 Test Number 25

 

Temperature and Humidity

  • ASTM D4169-14;
  • BS EN 50130-5:1999 Alarm Systems Part 5: Environmental Test Methods;
  • DEF STAN 00-35, Part 3, Issue 4:2006;
  • DET NORSKE VERITAS (DNV) STANDARD FOR CERTIFICATION NO. 2.4: ENVIRONMENTAL TEST SPECIFICATIONFOR INSTRUMENTATION ANDAUTOMATION EQUIPMENT (April 2006);
  • EIA/JEDEC Standard EIA/JESD22-A101-B;
  • IN 50130-5:1999 섹션 12 Damp Heat, Steady State (Operational);
  • IN 50130-5:1999 섹션 13 Damp Heat (Endurance);
  • IN 50130-5:1999 섹션 14 Damp Heat Cycling (Operational);
  • IN 50130-5:1999 섹션 15 Damp Heat Cycling (Endurance);
  • ETSI 300-019-2-1, 2, 3, 4, 5, 6, 7, 8;
  • GM 9123P;
  • GR-63-CORE, Issue 1, Paragraph 5.1.1.3, Humidity;
  • GR-63-CORE, Issue 1, 2 과 3, Paragraph 5.1.2, Humidity;
  • GR-1221-CORE, Paragraph 6.2.5 과 6.2.8, Humidity;
  • IEC 68-2-3, Test Ca, Humidity replaced by IEC 60068-2-78;
  • IEC 68-2-30, IEC 60068-2-30, 3ed 2005, Test Db, Humidity;
  • IEC 68-2-38 led 1974,Test Z/AD, Humidity;
  • IEC 60068-2-56, Test Cb, Humidity superseded by IEC 680068-2-78:2001;
  • IEC 60721-4-1:2001+A1:03 – Humidity/Damp Heat;
  • IEC 60721-4-2:2001+A1:03 – Humidity/Damp Heat;
  • IEC 60721-4-3:2001+A1:03 – Humidity/Damp Heat;
  • IEC 60721-4-4:2001+A1:03 – Humidity/Damp Heat;
  • IEC 60721-4-7:2001+A1:03 – Humidity/Damp Heat;
  • IEC 60601-1-11;
  • IEC 60721-3-2;
  • IS 10236 Part 4 – Damp Heat;
  • IS 10236 Part 5 – Damp Hear (Cyclic);
  • ISTA 1A- 2014, ISTA 2A-2011, ISTA 3A-2008;
  • JSS 55555:2000 Rev. 2 Test Number 10, 27;
  • MIL-DLT-62547C(AT);
  • MIL-STD-202F Method 103B, Conditions A, B, C, and D, Humidity;
  • MIL-STD-202F Method 106E, Humidity;
  • MIL-STD-202G Method 103B, Conditions A, B, C, and D, Humidity;
  • MIL-STD-202G Method 106G, Humidity;
  • MIL-STD-810C Method 507.1, Procedures I, II, III, IV, and VI;
  • MIL-STD-810D Method 507.2, Procedures I, II, and III;
  • MIL-STD-810E Method 507.3, Procedures I, II, and III;
  • MIL-STD-810F Method 507.4, Procedure I;
  • MIL-STD-810G Method 507.5 Procedures I, and II;
  • MIL-STD-883E Method 1004.7;
  • MIL-STD-883F Method 1004.7;
  • MIL-STD-883G Method 1004.7;
  • MIL-STD-883H Method 1004.7;
  • MIL-STD-883J Method 1004.7;
  • MIL-STD-1344A Method 1002.2, Type I, Conditions A, B, C, and D;
  • MIL-STD-1344A Method 1002.2, Type II, and III;
  • RTCA DO-160C,D,그것,F,G Section 6;
  • TIA/EIA 455-5C, Method A, Conditions A, B, C, D and E, Humidity;
  • TIA/EIA 455-5C, Method B and C, Humidity;

Vibration

  • ASTM D999, ASTM D999-96, D999-2001 Method Al, B, C, Sine Vibration;
  • ASTM D4169-14;
  • ASTM D4728, ASTM D4728-95, D4728-2006 RandomVibration;
  • BRB/LU Ltd /RIA SPECIFICATION No 20:1988 (Testing for Railway Vehicles);
  • DET NORSKE VERITAS (DNV) STANDARD FOR CERTIFICATION NO. 2.4 : ENVIRONMENTAL TEST SPECIFICATIONFOR INSTRUMENTATION ANDAUTOMATION EQUIPMENT (April 2006);
  • GR-63-CORE, Paragraph 5.4.2, Sine Vibration;
  • GR-63-CORE, Paragraph 5.4.3, Sine Vibration;
  • GR-1221-CORE, Paragraph 6.2.2, Sine Vibration;
  • General Motors Engineering Standards GM 9123P;
  • General Motors Engineering Standards GM 3155;
  • IEC 68-2-6, IEC 60068-2-6, Test Fc, Sine Vibration;
  • IEC 68-2-34:73 AMD 1 83, Test Fd, Random Vibration;
  • IEC 68-2-36, Test Fdb, Random vibration superseded by IEC 60068-2-64;
  • IEC 68-2-64 1993 COR 1 1993, Test Fh, Random Vibration;
  • IEC 60601-1-11;
  • IEC 60721-4-1:2001+A1:03 – Sine Vibration;
  • IEC 60721-4-2:2001+A1:03 – Random Vibration;
  • IEC 60721-4-2:2001+A1:03 – Sine Vibration;
  • IEC 60721-4-3:2001+A1:03 – Sine Vibration;
  • IEC 60721-4-4:2001+A1:03 – Sine Vibration;
  • IEC 60721-4-7:2001+A1:03 – Random Vibration;
  • IEC 60721-4-7:2001+A1:03 – Sine Vibration;
  • IEC 60721-3-2;
  • IS 10236 Part 11;
  • ISTA 1A-2014, ISTA 2A-2011, ISTA 3A-2008;
  • JIS E 3014: 1999 Part of Railway signal – Vibration Test Methods;
  • JSS 55555:2000 Rev. 2 Test Number 4, 28;
  • MIL-B-49430, Paragraph 4.8.6, Sine Vibration;
  • MIL-B-49458C (ER), Paragraph 4.8.6, Sine Vibration;
  • MIL-DLT-62547C(AT);
  • MIL-PRF-49471B (CR), Paragraph 4.7.6;
  • MIL-STD-202F Method 201A, Sine Vibration;
  • MIL-STD-202F Method 204D, Test Conditions A, B, C, D, 그것, F, 지, H, Sine Vibration;
  • MIL-STD-202F Method 214 Condition I, Test Conditions A, B, C, D, 그것, F, 지, H, J, K, Random Vibration;
  • MIL-STD-202F Method 214 Condition II, Test Conditions A, B, C, D, 그것, F, 지, H, J, K, Random Vibration;
  • MIL-STD-202G Method 201 A, Sine Vibration;
  • MIL-STD-202G Method 204D, Test Conditions A, B, C, D, 그것, F, 지, H, Sine Vibration;
  • MIL-STD-202F Method 204D, Test Conditions A, B, C, D, 그것, F, 지, H, Sine Vibration;
  • MIL-STD-202F Method 214 Condition I, Test Conditions A, B, C, D, 그것, F, 지, H,J, K, Random Vibration;
  • MIL-STD-202F Method 214 Condition II, Test Conditions A, B, C, D, 그것, F, 지, H, J, K, Random Vibration;
  • MIL-STD-202G Method 201 A, Sine Vibration;
  • MIL-STD-202G Method 204D, Test Conditions A, B, C, D, 그것, F, 지, H, Sine Vibration;
  • MIL-STD-202G Method 214 Condition I, Test Conditions A, B, C, D, 그것, F, 지, H,J, K, Random Vibration;
  • MIL-STD-202G Method 214 Condition II, Test Conditions A, B, C, D, 그것, F, 지, H, J, K, Random Vibration;
  • MIL-STD 167 -1A:05 – Vibrations of Shipboard Equipment;
  • MIL-STD-810C Method 514.2, Procedure I, Curve AR-L, Sine Vibration;
  • MIL-STD-810C Method 514.2, Procedure 1, Curve B, Sine Vibration;
  • MIL-STD-810C Method 514.2, Procedure 1, Curve M, Sine Vibration;
  • MIL-STD-810C Method 514.2, Procedure IA, Figure 514.2-2A, Random Vibration
  • MIL-STD-810C Method 514.2, Procedure IIA, Figure 514.2-4, Random Vibration;
  • MIL-STD-810C Method 514.2, Procedure IIB, Figure 514.2-4, Random Vibration;
  • MIL-STD-810C Method 514.2, Procedure V, VI, VII,Figure 514.2-4A, Sine & Random Vibration;
  • MIL-STD-810C Method 514.2, Procedure VIII, Curve V, Sine Vibration;
  • MIL-STD-810C Method 514.2, Procedure VIII, Curve W, Sine Vibration;
  • MIL-STD-810C Method 514.2, Procedure VIII, Curve Y, Sine Vibration;
  • MIL-STD-810D Method 514.3, Category 1, Procedure I, Random Vibration;
  • EIA/JEDEC STANDEARD EIA/JESD22 –B103-B;
  • MIL-STD-810D Method 514.3, Category 10, Procedure 1, Sine & Random Vibration
  • MIL-STD-810D Method 514.3, Category 4, 5, 6, 7B, 7C, 8, 9, Procedure I, Random Vibration;
  • MIL-STD-810D Method 514.3, Category 7A, Procedure IV, Random Vibration;
  • MIL-STD-810D Method 519.3, Random Vibration;
  • MIL-STD-810E Method 514.4, Category 1, 4, 5, 6, 7B, 7C, 8, 9, Procedure I, Random Vibration;
  • MIL-STD-8 I0E Method 514.4, Category 10, Procedure 1, Sine & Random Vibration;
  • MIL-STD-810E Method 514.4, Category 7A, Procedure IV, Random Vibration;
  • MIL-STD-8 1OE Method 519.4, Gunfire Vibration;
  • MIL-STD-810E Method 521.1;
  • MIL-STD-810F Method 514.5 Category 1, 2, 3, 4, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20, 21, 22, 23, 25, Procedure I, Random Vibration;
  • MIL-STD-810F Method 514.5, Category 15, 17, 18, 19, Procedure IV, Random Vibration;
  • MIL-STD-810F Method 514.5, Category 20, Procedure III, Random Vibration;
  • MIL-STD-8 10F Method 514.5, Category 24, Procedure 1, Sine Vibration;
  • MIL-STD-810F Method 519.5, Gunfire Vibration;
  • MIL-STD-810F Method 521.2;
  • MIL-STD-810F Method 528, Shipboard Equipment;
  • MIL-STD-810G Method 514.6, Category 1, 2, 3, 4, 7, 8, 9, 11, 12, 13, 14, 16, 17, 18, 19, 20, 221, 22, 23, 24, 25, Procedure I, Random Vibration;
  • MIL-STD-810G Method 514.6, Category 15, 17, 18, 19, Procedure IV, Random Vibration;
  • MIL-STD-810G Method 514.6, Category 20, Procedure III, Random Vibration;
  • MIL-STD-810G Method 519.6, Gunfire Vibration;
  • MIL-STD-810G Method 521.3;
  • MIL-STD-883E, F, 지, H, J Method 2005.2, Test Conditions A, B, C, Sine Vibration;
  • MIL-STD-883E, F, 지, H, J Method 2026, Condition 1, Test Conditions A, B, C, 그것, F, 지, H, J,K, Random Vibration;
  • MIL-STD-883E, F, 지, H, J Method 2026, Condition 11, Test Conditions A, B, C, 그것, F, 0, H, J, K, Random Vibration;
  • MIL-STD- I 344A Method 1015, Condition B (Group III) Sine Vibration;
  • MIL-STD- I 344A Method 2005.1, Conditions I, II, III, IV, V (A, B, C, D, 그것, F, 지,H, J, K), VI (A, B, C, D, 그것, F, 지, H, J, K);
  • RTCA DO-160D Section 8;
  • RTCA DO-160E Section 8;
  • RTCA DO-160F Section 8;
  • RTCA DO-160G Section 8;
  • TIA/EIA 455-1 IB, TIA/EIA 455-11C, Condition I, Sine Vibration;
  • TIA/EIA 455-1113, TIA/EIA 455-11C, Condition 11, Sine Vibration;
  • TIA/EIA 455-1113, TIA/EIA 455-11C, Condition III, Sine Vibration;
  • TIA/EIA 455-11B, TIA/EIA 455-11C, Condition IV, Sine Vibration;
  • TIA/EIA 455-1113, TIA/EIA 455-11C, Condition IV, Sine Vibration;
  • TIA/EIA 455-1113, TIA/EIA 455-11C, Condition VI, Random Vibration;
  • TIA/EIA 455-1 IB, TIA/EIA 455-11C, Condition VII, Random Vibration;
  • TIA/EIA 455-1 I C, TIAIEIA 455-11C, Condition I, Sine Vibration;
  • TIA/EIA 455-11C, TIA/EIA 455-11C, Condition II, Sine Vibration;
  • TIA/EIA 455-1 IC, TIA/EIA 455-11C, Condition III, Sine Vibration;
  • TIA/EIA 455-11 C, TIA/EIA 455-11C, Condition IV, Sine Vibration;
  • TIA/EIA 455-11C, TIA/EIA 455-11C, Condition IV, Sine Vibration;
  • TIA/EIA 455-1 1C, TIA/EIA 455-11C, Condition VI, Random Vibration;
  • TIA/EIA 455-11C, TIA/EIA 455-11C, Condition VII, Random Vibration;
  • QM-333 Paragraph 12.0, Category A, B, C, D, Sine Vibration;
  • UL-1642, Paragraph 15, Sine Vibration;
  • UN Transport of Dangerous Goods, Test T.2, Sine Vibration;
  • ISO 10651-3 Lung Ventilators Medical Use Part 3;
  • ISO 14708-1:200 (그것), 섹션 4: Protection against mechanical hazards;
  • BS EN 50155:2007;
  • BS EN 61373:1999;
  • DEF-STD 00-35 part 3;
  • DEF-STD 00-35 part 5;
  • ETSI 300-019-2-1, 2, 3, 4, 5, 6, 7, 8;
  • NATO AECTP-400 Edition 3;
  • BMW Group GS95003-1;
  • ASTM D999, Method A1, B, C, Sine Vibration;
  • ASTM D999, ASTM D999-96, D999-2001 (Method A1, B, C, Sine Vibration);
  • ASTM D4728, Random Vibration;
  • ASTM D4728, ASTM D4728-95, D4728-2006 Random Vibration;
  • IN 50130 섹션 22,23 Vibration, Sinusoidal;
  • IN 50130:1999 섹션 22 Vibration, Sinusoidal (Operational);
  • IN 50130:1999 섹션 23 Vibration, Sinusoidal (Endurance);
  • BS EN 50130-5:1999 Alarm Systems Part 5 : Environmental Test methods

 

HALT

 

  • Highly Accelerated Life Test (HALT);
  • Cold Temperature Steps;
  • Hot Temperature Steps;
  • Cold Start Test;
  • Temperature Cycling;
  • Random Vibration-3 axis;
  • Temperature & Vibration Combined Cycling;
  • Temperature Measurements

 

HASS

 

  • Highly Accelerated Stress Simulation (HASS); Stress Profile Definition; Analyzing POS Stage; Mounting Jig Assembly;
  • Running Multi-Tester Jig; Set-up for Mass Production; Temperature & Vibration Combined Cycling

 

IR Imaging

 

  • Using Inframetrics PM920 Thermacam IR Camera Using Method:
  • ThermaCAM Hand-held IR Imaging Radiometers Operating Instructions

 

Sand & Dust

 

  • (IP Code) Degrees of protection (IP-Code), IP5X,6X;
  • IS 10236 Part 13;
  • JSS 55555:2000 Rev.2 Test Number 14;
  • MIL-DLT-62547C(AT);
  • MIL-STD-810 C, D, 그것, F, 지, Method 510, Procedures I, II and III;
  • RTCA DO-160 C,D,그것,F,지, 섹션 12, Procedure II

 

회사 소개 :

퍼포먼스네트워크(주)

강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
이러한 : 02-980-9800(대표전화)
E-메일: info @ anytest.co.kr,en (Technical,시험인증)

ALT_TEXT
QR Code Generator
  • ASTM E283 – 04 (2012) 공기누설 시험2014년 1월 10일 - 2:28 오후

    [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

  • MIL-Spec Documents2013년 12월 11일 - 6:40 오후

    MIL-사양, MIL-STD 자료 상담 MIL-Spec Download,ko(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

  • MIL-STD-810G 시험항목2017년 8월 18일 - 12:43 오후

    아래는 MIL-STD-810G Part Two,,ko,높은 온도 MIL-STD-810G 방법,,en,저온 MIL-STD-810G 방법,,en,온도 충격 MIL-STD-810G 방법,,en,유체 MIL-STD-810G 방법에 의한 오염,,en,MIL-STD-810G 방법을 비,,en,습도 MIL-STD-810G 방법,,en,곰팡이 MIL-STD-810G 방법,,en (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

  • IP Code2016년 4월 12일 - 6:42 오후

    IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

  • ASTM E119 Fire Testing2016년 3월 25일 - 8:01 오후

    ASTM E 119 – 건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84, NFPA 285, UL 790, BS 476-6/7, NF P92-507, FROM 4102, IN 13501, GB 8624, BS 476-20，IN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

11월 2024
월 화 수 목 금 토 일
« Aug    
 123
45678910
11121314151617
18192021222324
252627282930  
© 저작권 - [AP Network 인증원-해외 제품 시험인증 상담,,ko,자동차 OEM 규격시험,,ko | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | FROM | IN, GOST-R | 테스트 & 증명서 | - 웹 페이지는 Performancenetwork Inc.에 의해 구축.