STD-EN 1XXXX Conti 2

| 1 || 2 || 3 |

IN 1337-8:2007 구조 베어링 - 부품 8: 가이드 베어링 및 감금 베어링

IN 1337-9:1997 구조 베어링 - 부품 9: Protection

IN 13381-4:2013 Test methods for determining the contribution to the fire resistance of structural members – Part 4: Applied passive protection to steel members

IN 13381-6:2012 Test methods for determining the contribution to the fire resistance of structural members – Part 6: Applied protection to concrete filled hollow steel columns

IN 13381-8:2013 Test methods for determining the contribution to the fire resistance of structural members – Part 8: Applied reactive protection to steel members

IN 13385:2002 Transportable gas cylinders – Battery vehicles for permanent and liquefied gases (아세틸렌 제외) - 충전 시간 검사

IN 13395-1:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 1: Test for flow of thixotropic mortars

IN 13395-2:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 2: Test for flow of grout or mortar

IN 13395-3:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 3: Test for flow of repair concrete

IN 13395-4:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 4: Application of repair mortar overhead

IN 13396:2004 Products and systems for the protection and repair of concrete structures – Test methods – Measurement of chloride ion ingress

IN 13397:2001 Industrial valves – Diaphragm valves made of metallic materials

IN 134:1998 Respiratory protective devices – Nomenclature of components

IN 13411-7:2006+A1:2008 스틸 와이어 로프 종단 - 안전 - 제 7: 대칭 쐐기 소켓

IN 13411-8:2011 스틸 와이어 로프 종단 - 안전 - 제 8: 스웨이지 단자 및 코킹

IN 13412:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of modulus of elasticity in compression

IN 13413:2001 Resilient floor coverings – Polyvinyl chloride floor coverings on a filled fibrous backing – Specification

IN 13417-1:2001 Reinforcement – Specifications for woven fabrics – Part 1: Designation

IN 13417-2:2001 Reinforcement – Specifications for woven fabrics – Part 2: Methods of test and general requirements

IN 13417-3:2001 Reinforcement – Specifications for woven fabrics – Part 3: Specific requirements

IN 13420:2011 Windows – Behaviour between different climates – Test method

IN 13445-1:2009 Unfired pressure vessels – Part 1: General

IN 13445-2:2009 Unfired pressure vessels – Part 2: Materials

IN 13445-2:2009/A1:2012 Unfired pressure vessels – Part 2: Materials

IN 13445-2:2009/A2:2012 Unfired pressure vessels – Part 2: Materials

IN 13445-3:2009 Unfired pressure vessels – Part 3: 디자인

IN 13445-3:2009/A1:2012 Unfired pressure vessels – Part 3: 디자인

IN 13445-4:2009 Unfired pressure vessels – Part 4: Fabrication

IN 13445-4:2009/A1:2011 Unfired pressure vessels – Part 4: Fabrication

IN 13445-5:2009 Unfired pressure vessels – Part 5: Inspection and testing

IN 13445-5:2009/A1:2011 Unfired pressure vessels – Part 5: Inspection and testing

IN 13445-5:2009/A2:2011 Unfired pressure vessels – Part 5: Inspection and testing

IN 13445-5:2009/A3:2011 Unfired pressure vessels – Part 5: Inspection and testing

IN 13445-5:2009/A4:2013 Unfired pressure vessels – Part 5: Inspection and testing

IN 13445-6:2009 Unfired pressure vessels – Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

IN 13445-8:2009 Unfired pressure vessels – Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys

IN 13446:2002 Wood-based panels – Determination of withdrawal capacity of fasteners

IN 13451-1:2011 Swimming pool equipment – Part 1: General safety requirements and test methods

IN 13451-10:2004 Swimming pool equipment – Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment

IN 13451-11:2004 Swimming pool equipment – Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads

IN 13451-2:2001 Swimming pool equipment – Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends

IN 13451-2:2001/AC:2003 Swimming pool equipment – Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends

IN 13451-3:2011+A1:2013 Swimming pool equipment – Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features

IN 13451-4:2001 Swimming pool equipment – Part 4: Additional specific safety requirements and test methods for starting platforms

IN 13451-5:2001 Swimming pool equipment – Part 5: Additional specific safety requirements and test methods for lane lines

IN 13451-6:2001 Swimming pool equipment – Part 6: Additional specific safety requirements and test methods for turning boards

IN 13451-7:2001 Swimming pool equipment – Part 7: Additional specific safety requirements and test methods for water polo goals

IN 1346:2007 Adhesives for tiles – Determination of open time

IN 13467:2001 Thermal insulating products for building equipment and industrial installations – Determination of dimensions, squareness and linearity of preformed pipe insulation

IN 13468:2001 Thermal insulating products for building equipment and industrial installations – Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH

IN 13469:2012 Thermal insulating products for building equipment and industrial installations – Determination of water vapour transmission properties of preformed pipe insulation

IN 13470:2001 Thermal insulating products for building equipment and industrial installations – Determination of the apparent density of preformed pipe insulation

IN 13471:2001 Thermal insulating products for building equipment and industrial installations – Determination of the coefficient of thermal expansion

IN 13472:2012 Thermal insulating products for building equipment and industrial installations – Determination of short term water absorption by partial immersion of preformed pipe insulation

IN 13477-1:2001 Non-destructive testing – Acoustic emission – Equipment characterisation – Part 1: Equipment description

IN 13478:2001+A1:2008 기계의 안전 - 화재 예방 및 보호

IN 13479:2004 용접 용 재료 - 금속 재료의 융합 용접 필러 금속 및 플럭스에 대한 일반 제품 기준

IN 1348:2007 Adhesives for tiles – Determination of tensile adhesion strength for cementitious adhesives

IN 13480-8:2012 Metallic industrial piping – Part 8: Additional requirements for aluminium and aluminium alloy piping

IN 13481-7:2012 Railway applications – Track – Performance requirements for fastening systems – Part 7: Special fastening systems for switches and crossings and check rails

IN 13487:2003 Heat exchangers – Forced convection air cooled refrigerant condensers and dry coolers – Sound measurement

IN 1349:2009 Industrial process control valves

IN 13494:2002 Thermal insulation products for building applications – Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

IN 13495:2002 Thermal insulation products for building applications – Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test)

IN 13496:2013 Thermal insulation products for building applications – Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS)

IN 13497:2002 Thermal insulation products for building applications – Determination of the resistance to impact of external thermal insulation composite systems (ETICS)

IN 13498:2002 Thermal insulation products for building applications – Determination of the resistance to penetration of external thermal insulation composite systems (ETICS)

IN 13499:2003 Thermal insulation products for buildings – External thermal insulation composite systems (ETICS) based on expanded polystyrene – Specification

IN 135:1998 Respiratory protective devices – List of equivalent terms

IN 13500:2003 Thermal insulation products for buildings – External thermal insulation composite systems (ETICS) based on mineral wool – Specification

IN 13501-1:2007+A1:2009 Fire classification of construction products and building elements – Part 1: Classification using data from reaction to fire tests

IN 13501-2:2007+A1:2009 Fire classification of construction products and building elements – Part 2: Classification using data from fire resistance tests, excluding ventilation services

IN 13501-3:2005+A1:2009 Fire classification of construction products and building elements – Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers

IN 13501-4:2007+A1:2009 Fire classification of construction products and building elements – Part 4: Classification using data from fire resistance tests on components of smoke control systems

IN 13501-5:2005+A1:2009 Fire classification of construction products and building elements – Part 5: Classification using data from external fire exposure to roofs tests

IN 13523-10:2010 Coil coated metals – Test methods – Part 10: Resistance to fluorescent UV radiation and water condensation

IN 13523-12:2004 Coil coated metals – Test methods – Part 12: 긁힘에 대한 저항

IN 13523-14:2001 Coil coated metals – Test methods – Part 14: Chalking (Helmen method)

IN 13523-15:2002 Coil coated metals – Test methods – Part 15: Metamerism

IN 13523-16:2004 Coil coated metals – Test methods – Part 16: Resistance to abrasion

IN 13523-17:2011 Coil coated metals – Test methods – Part 17: Adhesion of strippable films

IN 13523-18:2002 Coil coated metals – Test methods – Part 18: Resistance to staining

IN 13523-21:2010 Coil coated metals – Test methods – Part 21: Evaluation of outdoor exposed panels

IN 13523-22:2010 Coil coated metals – Test methods – Part 22: Colour difference – Visual comparison

IN 13523-23:2002 Coil coated metals – Test methods – Part 23: Colour stability in humid atmospheres containing sulfur dioxide

IN 13523-24:2004 Coil coated metals – Test methods – Part 24: Resistance to blocking and pressure marking

IN 13523-25:2006 Coil coated metals – Test methods – Part 25: Resistance to humidity

IN 13523-26:2006 Coil coated metals – Test methods – Part 26: Resistance to condensation of water

IN 13523-27:2009 Coil coated metals – Test methods – Part 27: Resistance to humid poultice (Cataplasm test)

IN 13523-29:2010 Coil coated metals – Test methods – Part 29: Resistance to environmental soiling (Dirt pick-up and striping)

IN 13523-7:2001 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)

IN 13523-8:2010 Coil coated metals – Test methods – Part 8: Resistance to salt spray (fog)

IN 13523-9:2001 Coil coated metals – Test methods – Part 9: Resistance to water immersion

IN 13527:1999 Shutters and blinds – Measurement of operating force – Test methods

IN 13529:2003 Products and systems for the protection and repair of concrete structures – Test methods – Resistance to severe chemical attack

IN 13537:2012 Requirements for sleeping bags

IN 13538-2:2002 Determination of dimensional characteristics of sleeping bags – Part 2: Thickness and elastic recovery

IN 13538-3:2002 Determination of dimensional characteristics of sleeping bags – Part 3: Volume under load and easiness of packing

IN 13541:2012 Glass in building – Security glazing – Testing and classification of resistance against explosion pressure

IN 13547:2013 Industrial valves – Copper alloy ball valves

IN 13551:2003 Inland navigation vessels – Vocabulary

IN 13553:2002 Resilient floor coverings – Polyvinyl chloride floor coverings for use in special wet areas – Specification

IN 13555:2004 Flanges and their joints – Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections

IN 13561:2004+A1:2008 외부 블라인드 - 안전 등의 성능 요구 사항

IN 13573:2009 Inland navigation vessels – Anchoring, coupling, towing, hauling and mooring systems

IN 13574:2001 Inland navigation vessels – Permanently installed climbing devices with a length not exceeding 5 m

IN 13577:2007 Chemical attack on concrete – Determination of aggressive carbon dioxide content in water

IN 13578:2003 Products and systems for the protection and repair of concrete structure – Test Method – Compatibility on wet concrete

IN 13579:2002 Products and systems for the protection and repair of concrete structures – Test methods – Drying test for hydrophobic impregnation

IN 13580:2002 Products and systems for the protection and repair of concrete structures – Test Methods – Water absorption and resistance to alkali for hydrophobic impregnations

IN 13581:2002 Products and systems for the protection and repair of concrete structures – Test method – Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress

IN 13584:2003 Products and systems for the protection and repair of concrete structures – Test methods – Determination of creep in compression for repair products

IN 13599:2002 Copper and copper alloys – Copper plate, sheet and strip for electrical purposes

IN 136:1998 Respiratory protective devices – Full face masks – Requirements, 테스트, 마킹

IN 136:1998/AC:2003 Respiratory protective devices – Full face masks – Requirements, 테스트, 마킹

IN 13600:2013 Copper and copper alloys – Seamless copper tubes for electrical purposes

IN 13601:2013 Copper and copper alloys – Copper rod, bar and wire for general electrical purposes

IN 13602:2013 Copper and copper alloys – Drawn, round copper wire for the manufacture of electrical conductors

IN 13603:2013 Copper and copper alloys – Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes

IN 13604:2013 Copper and copper alloys – Semiconductor devices, electronic and vacuum products made from high conductivity copper

IN 13605:2013 Copper and copper alloys – Copper profiles and profiled wire for electrical purposes

IN 13611:2007+A2:2011 Safety and control devices for gas burners and gas burning appliances – General requirements

IN 13613:2009 Roller sports equipment – Skateboards – Safety requirements and tests methods

IN 13622:2002 Gas welding equipment – Terminology – Terms used for gas welding equipment

IN 13625:2001 Non-destructive testing – Leak test – Guide to the selection of instrumentation for the measurement of gas leakage

IN 1363-1:2012 Fire resistance tests – Part 1: 일반 요구 사항

IN 1363-2:1999 Fire resistance tests – Part 2: Alternative and additional procedures

IN 13639:2002 Determination of total organic carbon in limestone

IN 13639:2002/AC:2004 Determination of total organic carbon in limestone

IN 1364-1:1999 Fire resistance tests for non-loadbearing elements – Part 1: Walls

IN 1364-2:1999 Fire resistance tests for non-loadbearing elements – Part 2: Ceilings

IN 1364-3:2006 Fire resistance tests for non-loadbearing elements – Part 3: Curtain walling – Full configuration (complete assembly)

IN 1364-4:2007 Fire resistance tests for non-loadbearing elements – Part 4: Curtain walling – Part configuration

IN 13645:2001 Installations and equipment for liquefied natural gas – Design of onshore installations with a storage capacity between 5 t and 200 t

IN 1365-1:2012 Fire resistance tests for loadbearing elements – Part 1: Walls

IN 1365-1:2012/AC:2013 Fire resistance tests for loadbearing elements – Part 1: Walls

IN 1365-2:1999 Fire resistance tests for loadbearing elements – Part 2: Floors and roofs

IN 1365-3:1999 Fire resistance tests for loadbearing elements – Part 3: 빔

IN 1365-4:1999 Fire resistance tests for loadbearing elements – Part 4: Columns

IN 13654-1:2001 Soil improvers and growing media – Determination of nitrogen – Part 1: Modified Kjeldahl method

IN 13654-2:2001 Soil improvers and growing media – Determination of nitrogen – Part 2: Dumas method

IN 1365-5:2004 Fire resistance tests for loadbearing elements – Part 5: Balconies and walkways

IN 1365-6:2004 Fire resistance tests for loadbearing elements – Part 6: 계단

IN 13659:2004+A1:2008 셔터 - 안전 등의 성능 요구 사항

IN 1366-1:1999 Fire resistance tests for service installations – Part 1: Ducts

IN 1366-10:2011 Fire resistance tests for service installations – Part 10: 제연 댐퍼

IN 1366-2:1999 Fire resistance tests for service installations – Part 2: Fire dampers

IN 1366-3:2009 Fire resistance tests for service installations – Part 3: Penetration seals

IN 1366-4:2006+A1:2010 Fire resistance tests for service installations – Part 4: Linear joint seals

IN 1366-5:2010 Fire resistance tests for service installations – Part 5: Service ducts and shafts

IN 1366-6:2004 Fire resistance tests for service installations – Part 6: Raised access and hollow core floors

IN 1366-7:2004 Fire resistance tests for service installations – Part 7: Conveyor systems and their closures

IN 1366-8:2004 Fire resistance tests for service installations – Part 8: Smoke extraction ducts

IN 1366-9:2008 Fire resistance tests for service installations – Part 9: Single compartment smoke extraction ducts

IN 13670:2009 Execution of concrete structures

IN 13687-1:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 1: Freeze-thaw cycling with de-icing salt immersion

IN 13687-2:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 2: Thunder-shower cycling (thermal shock)

IN 13687-3:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 3: Thermal cycling without de-icing salt impact

IN 13687-4:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 4: Dry thermal cycling

IN 13687-5:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 5: Resistance to temperature shock

IN 13698-1:2003 Pallet production specification – Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets

IN 13698-2:2009 Pallet production specification – Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets

IN 137:2006 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, 테스트, 마킹

IN 13709:2010 Industrial valves – Steel globe and globe stop and check valves

IN 13711:2002 Inland navigation vessels – Winches for ship operation – Safety requirements

IN 13720:2002 Transportable gas cylinders – Filling conditions for acetylene battery vehicles

IN 13723:2002 Petroleum products – Determination of low lead contents in gasolines – Wavelength-dispersive X-ray fluorescence spectrometry (XRF)

IN 13733:2002 Products and systems for the protection and repair of concrete structures – Tests methods – Determination of the durability of structural bonding agents

IN 13741:2003 Thermal performance acceptance testing of mechanical draught series wet cooling towers

IN 13763-17:2003 Explosives for civil uses – Detonators and relays – Part 17: Determination of no-fire current of electric detonators

IN 13763-18:2003 Explosives for civil uses – Detonators and relays – Part 18: Determination of series firing current of electric detonators

IN 13763-21:2003 Explosives for civil uses – Detonators and relays – Part 21: Determination of flash-over voltage of electric detonators

IN 13763-22:2003 Explosives for civil uses – Detonators and relays – Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leading wires

IN 13763-23:2002 Explosives for civil uses – Detonators and relays – Part 23: Determination of the shock-wave velocity of shock tube

IN 13763-24:2002 Explosives for civil uses – Detonators and relays – Part 24: Determination of the electrical non-conductivity of shock tube

IN 13763-25:2004 Explosives for civil uses – Detonators and relays – Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories

IN 13763-26:2004 Explosives for civil uses – Detonators and relays – Part 26: 정의, methods, and requirements for devices and accessories for reliable and safe function of detonators and relays

IN 13771-1:2003 Compressors and condensing units for refrigeration – Performance testing and test methods – Part 1: Refrigerant compressors

IN 13771-2:2007 Compressors and condensing units for refrigeration – Performance testing and test methods – Part 2: Condensing units

IN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar – Performance requirements

IN 13789:2010 Industrial valves – Cast iron globe valves

IN 13791:2007 Assessment of in-situ compressive strength in structures and precast concrete components

IN 13793:2003 Thermal insulating products for building applications – Determination of behaviour under cyclic loading

IN 13794:2002 Respiratory protective devices – Self-contained closed-circuit breathing apparatus for escape – Requirements, 테스트, 마킹

IN 138:1994 Respiratory protective devices – Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly – Requirements, 테스트, 마킹

IN 1380:2009 Timber structures – Test methods – Load bearing nails, screws, dowels and bolts

IN 13807:2003 Transportable gas cylinders – Battery vehicles – Design, manufacture, identification and testing

IN 13807:2003/AC:2005 Transportable gas cylinders – Battery vehicles – Design, manufacture, identification and testing

IN 1381:1999 Timber structures – Test methods – Load bearing stapled joints

IN 13810-1:2002 Wood-based panels – Floating floors – Part 1: Performance specifications and requirements

IN 1382:1999 Timber structures – Test methods – Withdrawal capacity of timber fasteners

IN 13820:2003 Thermal insulating materials for building applications – Determination of organic content

IN 13823:2010 Reaction to fire tests for building products – Building products excluding floorings exposed to the thermal attack by a single burning item

IN 13829:2000 Thermal performance of buildings – Determination of air permeability of buildings – Fan pressurization method (ISO 9972:1996, 수정)

IN 1383:1999 Timber structures – Test methods – Pull through resistance of timber fasteners

IN 13830:2003 커튼 벽 건설 - 제품 표준

IN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water

IN 13836:2006 Gas fired central heating boilers – Type B boilers of nominal heat input exceeding 300 kW 급, but not exceeding 1 000 kW 급

IN 13842:2004 Oil fired forced convection air heaters – Stationary and transportable for space heating

IN 13843:2009 Roller sports equipment – Inline-skates – Safety requirements and test methods

IN 13845:2005 Resilient floor coverings – Polyvinyl chloride floor coverings with particle based enhanced slip resistance – Specification

IN 1386:2007 Aluminium and aluminium alloys – Tread plate – Specifications

IN 13861:2011 Safety of machinery – Guidance for the application of ergonomics standards in the design of machinery

IN 13863-2:2003 콘크리트 포장 도로 - 부품 2: Test method for the determination of the bond between two layers

IN 13879:2002 Wood-based panels – Determination of edgewise bending properties

IN 13880-10:2003 Hot applied joint sealants – Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression

IN 13880-7:2003 Hot applied joint sealants – Part 7: Function testing of joint sealants

IN 13880-8:2003 Hot applied joint sealants – Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

IN 13880-9:2003 Hot applied joint sealants – Part 9: Test method for the determination of compatibility with asphalt pavements

IN 13888:2009 Grout for tiles – Requirements, 적합성 평가, 분류 및 지정

IN 13890:2009 Workplace exposure – Procedures for measuring metals and metalloids in airborne particles – Requirements and test methods

IN 13893:2002 탄력, laminate and textile floor coverings – Measurement of dynamic coefficient of friction on dry floor surfaces

IN 13894-1:2003 Products and systems for the protection and repair of concrete structures – Test methods – Determination of fatigue under dynamic loading – Part 1: During cure

IN 13894-2:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of fatigue under dynamic loading – Part 2: After hardening

IN 13899:2003 Roller sports equipment – Roller skates – Safety requirements and test methods

IN 1390:2006 Wood preservatives – Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae – Laboratory method

IN 13914-1:2005 디자인, preparation and application of external rendering and internal plastering – External rendering

IN 13914-2:2005 디자인, preparation and application of external rendering and internal plastering – Part 2: Design considerations and essential principles for internal plastering

IN 13920-1:2003 Aluminium and aluminium alloys – Scrap – Part 1: 일반 요구 사항, sampling and tests

IN 13920-10:2003 Aluminium and aluminium alloys – Scrap – Part 10: Scrap consisting of used aluminium beverage cans

IN 13920-11:2003 Aluminium and aluminium alloys – Scrap – Part 11: Scrap consisting of aluminium-copper radiators

IN 13920-12:2003 Aluminium and aluminium alloys – Scrap – Part 12: Turnings consisting of one single alloy

IN 13920-13:2003 Aluminium and aluminium alloys – Scrap – Part 13: Mixed turnings consisting of two or more alloys

IN 13920-14:2003 Aluminium and aluminium alloys – Scrap – Part 14: Scrap from post-consumer aluminium packagings

IN 13920-15:2003 Aluminium and aluminium alloys – Scrap – Part 15: Decoated aluminium scrap from post-consumer aluminium packagings

IN 13920-16:2003 Aluminium and aluminium alloys – Scrap – Part 16: Scrap consisting of skimmings, drosses, spills and metallics

IN 13920-2:2003 Aluminium and aluminium alloys – Scrap – Part 2: Unalloyed aluminium scrap

IN 13920-3:2003 Aluminium and aluminium alloys – Scrap – Part 3: Wire and cable scrap

IN 13920-4:2003 Aluminium and aluminium alloys – Scrap – Part 4: Scrap consisting of one single wrought alloy

IN 13920-5:2003 Aluminium and aluminium alloys – Scrap – Part 5: Scrap consisting of two or more wrought alloys of the same series

IN 13920-6:2003 Aluminium and aluminium alloys – Scrap – Part 6: Scrap consisting of two or more wrought alloys

IN 13920-7:2003 Aluminium and aluminium alloys – Scrap – Part 7: Scrap consisting of castings

IN 13920-8:2003 Aluminium and aluminium alloys – Scrap – Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes

IN 13920-9:2003 Aluminium and aluminium alloys – Scrap – Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials

IN 13921:2007 Personal protective equipment – Ergonomic principles

IN 13925-1:2003 Non-destructive testing – X-ray diffraction from polycrystalline and amorphous material – Part 1: 일반 원칙

IN 13925-2:2003 Non-destructive testing – X-ray diffraction from polycrystalline and amorphous materials – Part 2: Procedures

IN 13925-3:2005 Non destructive testing – X ray diffraction from polycrystalline and amorphous materials – Part 3: 악기

IN 13927:2003 Non-destructive testing – Visual testing – Equipment

IN 13941:2009+A1:2010 Design and installation of preinsulated bonded pipe systems for district heating

IN 13942:2009 Petroleum and natural gas industries – Pipeline transportation systems – Pipeline valves (ISO 14313:2007 수정)

IN 13942:2009/AC:2009 Petroleum and natural gas industries – Pipeline transportation systems – Pipeline valves (ISO 14313:2007 modified/Cor 1:2009)

IN 13949:2003 Respiratory equipment – Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen – Requirements, 테스트, 마킹

IN 1395-7:2007 Thermal spraying – Acceptance inspection of thermal spraying equipment – Part 7: Powder feed systems

IN 13957:2008 Aluminium and aluminium alloys – Extruded round, coiled tube for general applications – Specification

IN 13958:2008 Aluminium and aluminium alloys – Cold drawn, round, coiled tube for general applications – Specification

IN 1396:2007 Aluminium and aluminium alloys – Coil coated sheet and strip for general applications – Specifications

IN 1397:1998 Heat exchangers – Hydronic room fan coil units – Test procedures for establishing the performance

IN 1398:2009 도크 레벨러 - 안전 요구 사항

IN 13981-1:2003 Aluminium and aluminium alloys – Products for structural railway applications – Technical conditions for inspection and delivery – Part 1: Extruded products

IN 13981-2:2004 Aluminium and aluminium alloys – Products for structural railway applications – Technical conditions for inspection and delivery – Part 2: Plates and sheets

IN 13981-3:2006 Aluminium and aluminium alloys – Products for structural railway applications – Technical conditions for inspection and delivery – Part 3: Castings

IN 13981-4:2006 Aluminium and aluminium alloys – Products for structural railway applications – Technical conditions for inspection and delivery – Part 4: 단조

IN 13986:2004 건설에 사용되는 목재 기반 패널 - 특징, 적합성 평가 및 표시

IN 1399:1997 Resilient floor coverings – Determination of resistance to stubbed and burning cigarettes

IN 1399:1997/AC:1998 Resilient floor coverings – Determination of resistance to stubbed and burning cigarettes

IN 140:1998 Respiratory protective devices – Half masks and quarter masks – Requirements, 테스트, 마킹

IN 140:1998/AC:1999 Respiratory protective devices – Half masks and quarter masks – Requirements, 테스트, 마킹

IN 14010:2003+A1:2009 기계의 안전 - 자동차의 전원 구동 주차 장비 - 디자인에 대한 안전 및 EMC 요구 사항, 제조의, 발기 및 시운전 단계

IN 1401-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(비닐 클로라이드) (PVC-U) - 부품 1: 파이프 사양, 피팅 및 시스템

IN 14017:2005+A2:2009 농업 및 임업 기계 - 고체 비료 유통 - 안전

IN 14018:2005+A1:2009 농업 및 임업 기계 - 종자 훈련 - 안전

IN 14019:2004 Curtain Walling – Impact resistance – Performance requirements

IN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods

IN 14024:2004 Metal profiles with thermal barrier – Mechanical performance – Requirements, proof and tests for assessment

IN 14031:2003 Workplace atmospheres – Determination of airborne endotoxins

IN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds – Part 4: Determination of the limiting oxygen concentration LOC of dust clouds

IN 14037-1:2003 천장 아래의 온도에서 물을 공급 복사 패널을 장착 120 ° C - 부품 1: 기술 사양 및 요구 사항

IN 14037-2:2003 천장 아래의 온도에서 물을 공급 복사 패널을 장착 120 ° C - 부품 2: Test method for thermal output

IN 14037-3:2003 천장 아래의 온도에서 물을 공급 복사 패널을 장착 120 ° C - 부품 3: Rating method and evaluation of radiant thermal output

IN 14041:2004 탄력, 섬유 및 라미네이트 바닥 깔개 - 필수 특성

IN 14041:2004/AC:2006 탄력, 섬유 및 라미네이트 바닥 깔개 - 필수 특성

IN 14042:2003 Workplace atmospheres – Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents

IN 14052:2012+A1:2012 High performance industrial helmets

IN 14055:2010 화장실 및 소변기 세척 물 탱크

IN 14058:2004 Protective clothing – Garments for protection against cool environments

IN 14063-1:2004 건물 용 단열재 제품 - 원위치 형성 팽창 점토 경량 골재 제품 - 부품 1: 설치하기 전에 느슨한 채우기 제품 사양

IN 14063-1:2004/AC:2006 Thermal insulation products – In-situ formed expanded clay lightweight aggregate products – Part 1: 설치하기 전에 느슨한 채우기 제품 사양

IN 14063-2:2013 건물 용 단열재 제품 - 원위치 형성 팽창 점토 경량 골재 제품 - 부품 2: Specification for the installed products

IN 14064-1:2010 건물 용 단열재 제품 - 원위치 형성 루스 채우기 미네랄 울 (MW) 제품 - 부품 1: 설치하기 전에 느슨한 채우기 제품 사양

IN 14064-2:2010 건물 용 단열재 제품 - 원위치 형성 루스 채우기 미네랄 울 (MW) 제품 - 부품 2: Specification for the installed products

IN 14067-4:2013 Railway applications – Aerodynamics – Part 4: Requirements and test procedures for aerodynamics on open track

IN 14068:2003 Products and systems for the protection and repair of concrete structures – Test methods – Determination of watertightness of injected cracks without movement in concrete

IN 14070:2003+A1:2009 공작 기계의 안전 - 전송 및 특수 목적 기계

IN 14070:2003+A1:2009/AC:2010 공작 기계의 안전 - 전송 및 특수 목적 기계

IN 14077:2003 Petroleum products – Determination of organic halogen content – Oxidative microcoulometric method

IN 14078:2009 Liquid petroleum products – Determination of fatty acid methyl ester (명성) content in middle distillates – Infrared spectrometry method

IN 14080:2013 Timber structures – Glued laminated timber and glued solid timber – Requirements

IN 14081-1:2005+A1:2011 목재 구조 - 직사각형 단면과 강도 등급 구조용 목재 - 부품 1: 일반 요구 사항

IN 14081-2:2010+A1:2012 목재 구조 - 직사각형 단면과 강도 등급 구조용 목재 - 부품 2: Machine grading; additional requirements for initial type testing

IN 14081-3:2012 목재 구조 - 직사각형 단면과 강도 등급 구조용 목재 - 부품 3: Machine grading; additional requirements for factory production control

IN 14081-4:2009 목재 구조 - 직사각형 단면과 강도 등급 구조용 목재 - 부품 4: Machine grading – Grading machine settings for machine controlled systems

IN 14085:2010 Resilient floor coverings – Specification for floor panels for loose laying

IN 14096-1:2003 Non-destructive testing – Qualification of radiographic film digitisation systems – Part 1: 정의, quantitative measurements of image quality parameters, standard reference film and qualitative control

IN 14096-2:2003 Non-destructive testing – Qualification of radiographic film digitisation systems – Part 2: 최소 요구 사항

IN 1411:1996 Plastics piping and ducting systems – Thermoplastics pipes – Determination of resistance to external blows by the staircase method

IN 14114:2002 Hygrothermal performance of building equipment and industrial installations – Calculation of water vapour diffusion – Cold pipe insulation systems

IN 14117:2004 Products systems for the protection and repair of concrete structures – Test methods – Determination of time of efflux of cementitious injection products

IN 1412:1995 Copper and copper alloys – European numbering system

IN 14120:2003+A1:2007 Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods

IN 14121:2009 Aluminium and aluminium alloys – Sheet, strip and plate for electrotechnical applications

IN 14124:2004 Inlet valves for flushing cisterns with internal overflow

IN 14126:2003 Protective clothing – Performance requirements and tests methods for protective clothing against infective agents

IN 14126:2003/AC:2004 Protective clothing – Performance requirements and tests methods for protective clothing against infective agents

IN 14127:2011 Non-destructive testing – Ultrasonic thickness measurement

IN 14128:2003 Durability of wood and wood-based products – Performance criteria for curative wood preservatives as determined by biological tests

IN 14134:2004 Ventilation for buildings – Performance testing and installation checks of residential ventilation systems

IN 14135:2004 Coverings – Determination of fire protection ability

IN 14136:2004 Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures

IN 14141:2013 Valves for natural gas transportation in pipelines – Performance requirements and tests

IN 14143:2013 Respiratory equipment – Self-contained re-breathing diving apparatus

IN 14144:2003 Lifebuoys – Requirements, 테스트

IN 14145:2003 Holders for lifebuoys

IN 14154-1:2005+A2:2011 Water meters – Part 1: 일반 요구 사항

IN 14154-2:2005+A2:2011 Water meters – Part 2: Installation and conditions of use

IN 14154-3:2005+A2:2011 Water meters – Part 3: Test methods and equipment

IN 14161:2011 Petroleum and natural gas industries – Pipeline transportation systems (ISO 13623:2009 수정)

IN 14163:2001 Petroleum and natural gas industries – Pipeline transportation systems – Welding of pipelines (ISO 13847:2000 수정)

IN 14163:2001/AC:2006 Petroleum and natural gas industries – Pipeline transportation systems – Welding of pipelines (ISO 13847:2000 수정)

IN 1417:1996+A1:2008 플라스틱 및 고무 기계 - 두 개의 롤 공장 - 안전 요구 사항

IN 1417:1996+A1:2008/AC:2009 플라스틱 및 고무 기계 - 두 개의 롤 공장 - 안전 요구 사항

IN 14178-1:2004 건물의 유리 - 기본 알칼리 토금속 규산염 유리 제품 - 부품 1: Float glass

IN 14178-2:2004 건물의 유리 - 기본 알칼리 토금속 규산염 유리 제품 - 부품 2: 적합성 / 제품 표준의 평가

IN 14179-1:2005 유리 건물에 - 열은 열 소다 석회 규산염 안전 유리를 단단하게 배어 - 부품 1: 정의 및 설명

IN 14179-2:2005 유리 건물에 - 열은 열 소다 석회 규산염 안전 유리를 단단하게 배어 - 부품 2: 적합성 / 제품 표준의 평가

IN 14180:2003+A2:2009 Sterilizers for medical purposes – Low temperature steam and formaldehyde sterilizers – Requirements and testing

IN 14183:2003 Step stools

IN 14187-7:2003 Cold applied joint sealants – Part 7: Test method for the determination of the resistance to flame

IN 14187-8:2003 Cold applied joint sealants – Part 8: Test method for the determination of the artificial weathering by UV-irradiation

IN 14187-9:2006 Cold applied joint sealants – Test methods – Part 9: Function testing of joint sealants

IN 142:2002 Respiratory protective devices – Mouthpiece assemblies – Requirements, 테스트, 마킹

IN 1420-1:1999 Influence of organic materials on water intended for human consumption – Determination of odour and flavour assessment of water in piping systems – Part 1: Test method

IN 14201:2004 Blinds and shutters – Resistance to repeated operations (mechanical endurance) – Methods of testing

IN 14202:2004 Blinds and shutters – Suitability for use of tubular and square motorizations – Requirements and test methods

IN 14203:2004 Blinds and shutters – Capability for use of gears with crank handle – Requirements and test methods

IN 14206:2003 Inland navigation vessels – Gangways for passenger vessels – Requirements, 테스트

IN 14208:2004 Transportable gas cylinders – Specification for welded pressure drums up to 1000 litre capacity for the transport of gases – Design and construction

IN 14214:2012 Liquid petroleum products – Fatty acid methyl esters (명성) for use in diesel engines and heating applications – Requirements and test methods

IN 14215:2013 Textile floor coverings – Classification of machine-made pile rugs and runners

IN 14216:2004 시멘트 - 구성, 아주 저열 특수 시멘트의 사양 및 적합성 기준

IN 1422:1997+A1:2009 Sterilizers for medical purposes – Ethylene oxide sterilizers – Requirements and test methods

IN 14225-1:2005 Diving suits – Part 1: Wet suits – Requirements and test methods

IN 14225-2:2005 Diving suits – Part 2: Dry suits – Requirements and test methods

IN 14225-3:2005 Diving suits – Part 3: Actively heated or cooled suits (systems) - 요구 사항 및 시험 방법

IN 14225-4:2005 Diving suits – Part 4: One atmosphere suits (ADS) – Human factors requirements and test methods

IN 14227-10:2006 Hydraulically bound mixtures – Specifications – Part 10: Soil treated by cement

IN 14229:2010 구조용 목재 - 오버 헤드 라인 나무 기둥

IN 14238:2004+A1:2009 크레인 - 수동으로 제어 된로드 조작 장치

IN 14239:2004 Ventilation for buildings – Ductwork – Measurement of ductwork surface area

IN 14240:2004 Ventilation for buildings – Chilled ceilings – Testing and rating

IN 14242:2004 Aluminium and aluminium alloys – Chemical analysis – Inductively coupled plasma optical emission spectral analysis

IN 14250:2010 목재 구조 - 조립식 구조 부재에 대한 제품 요구 사항은 펀칭 메탈 플레이트의 체결로 조립

IN 14251:2003 Structural round timber – Test methods

IN 14254:2004 In vitro diagnostic medical devices – Single-use receptacles for the collection of specimens, other than blood, from humans

IN 14272:2011 Plywood – Calculation method for some mechanical properties

IN 14274:2013 Automotive fuels – Assessment of petrol and diesel quality – Fuel quality monitoring system (FQMS)

IN 14274:2013/AC:2013 Automotive fuels – Assessment of petrol and diesel quality – Fuel quality monitoring system (FQMS)

IN 14275:2013 Automotive fuels – Assessment of petrol and diesel fuel quality – Sampling from retail site pumps and commercial site fuel dispensers

IN 14277:2006 Ventilation for buildings – Air terminal devices – Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes

IN 14279:2004+A1:2009 Laminated Veneer Lumber (LVL) – Definitions, classification and specifications

IN 14286:2008 Aluminium and aluminium alloys – Weldable rolled products for tanks for the storage and transportation of dangerous goods

IN 14287:2004 Aluminium and aluminium alloys – Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components

IN 14291:2004 Foam producing solutions for leak detection on gas installations

IN 14296:2005 위생 제품 - 공동 세탁 골짜기

IN 143:2000 Respiratory protective devices – Particle filters – Requirements, 테스트, 마킹

IN 143:2000/A1:2006 Respiratory protective devices – Particle filters – Requirements, 테스트, 마킹

IN 143:2000/AC:2005 Respiratory protective devices – Particle filters – Requirements, 테스트, 마킹

IN 14303:2009+A1:2013 건설 장비 및 산업 설비 용 열 절연 제품 - 공장 미네랄 울을 만든 (MW) 제품 - 사양

IN 14304:2009+A1:2013 건설 장비 및 산업 설비 용 열 절연 제품 - 공장 유연한 탄성 거품을 만들어 (FEF) 제품 - 사양

IN 14305:2009+A1:2013 건설 장비 및 산업 설비 용 열 절연 제품 - 공장 셀룰러 유리했다 (CG) 제품 - 사양

IN 14306:2009+A1:2013 건설 장비 및 산업 설비 용 열 절연 제품 - 공장 규산 칼슘을했다 (CS) 제품 - 사양

IN 14307:2009+A1:2013 건설 장비 및 산업 설비 용 열 절연 제품 - 공장 압출 발포 폴리스티렌했다 (XPS) 제품 - 사양

IN 14308:2009+A1:2013 건설 장비 및 산업 설비 용 열 절연 제품 - 공장 경질 폴리 우레탄 폼을 만든 (PUR) 및 폴리이 소시 아누 레이트 폼 (PIR) 제품 - 사양

IN 14309:2009+A1:2013 건설 장비 및 산업 설비 용 열 절연 제품 - 공장 확장 폴리스티렌 제품을 만들어 (EPS) - 사양

IN 14313:2009+A1:2013 건설 장비 및 산업 설비 용 열 절연 제품 - 공장 폴리에틸렌 폼을 만든 (PEF) 제품 - 사양

IN 14314:2009+A1:2013 건설 장비 및 산업 설비 용 열 절연 제품 - 공장 페놀 거품을 만들어 (PF) 제품 - 사양

IN 14315-1:2013 Thermal insulating products for buildings – In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 1: Specification for the rigid foam spray system before installation

IN 14315-2:2013 Thermal insulating products for buildings – In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 2: Specification for the installed insulation products

IN 14316-1:2004 건물 용 단열재 제품 - 원위치 확장 펄라이트 형성 보온 (EP) 제품 - 부품 1: 설치하기 전에 결합 느슨한 채우기 제품 사양

IN 14316-2:2007 Thermal insulating products for buildings – In-situ thermal insulation formed from expanded perlite (EP) 제품 - 부품 2: Specification for the installed products

IN 14317-1:2004 건물 용 단열재 제품 - 원위치 박리 질석 형성 보온 (HOME) 제품 - 부품 1: 설치하기 전에 결합 느슨한 채우기 제품 사양

IN 14317-2:2007 건물 용 단열재 제품 - 원위치 박리 질석 형성 보온 (HOME) 제품 - 부품 2: Specification for the installed products

IN 14318-1:2013 Thermal insulating products for buildings – In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 1: Specification for the rigid foam dispensed system before installation

IN 14318-2:2013 Thermal insulating products for buildings – In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 2: Specification for the installed insulation products

IN 14319-1:2013 Thermal insulating products for building equipment and industrial installations – In-situ formed dispensed rigid polyurethane (PUR) 및 폴리이 소시 아누 레이트 폼 (PIR) 제품 - 부품 1: Specification for the rigid foam dispensed system before installation

IN 14319-2:2013 Thermal insulating products for building equipment and industrial installations – In-situ formed dispensed rigid polyurethane (PUR) 및 폴리이 소시 아누 레이트 폼 (PIR) 제품 - 부품 2: Specification for the installed insulation products

IN 1432:1997 Swap bodies – Swap tanks – Dimensions, 요구 사항, 시험 방법, operation conditions

IN 14320-1:2013 Thermal insulating products for building equipment and industrial installations – In-situ formed sprayed rigid polyurethane (PUR) 및 폴리이 소시 아누 레이트 폼 (PIR) 제품 - 부품 1: Specification for the rigid foam spray system before installation

IN 14320-2:2013 Thermal insulating products for building equipment and industrial installations – In-situ formed sprayed rigid polyurethane (PUR) 및 폴리이 소시 아누 레이트 폼 (PIR) 제품 - 부품 2: Specification for the installed insulation products

IN 14321-1:2005 건물의 유리 - 열적 알칼리 토금속 규산염 안전 강화 유리 - 부품 1: 정의 및 설명

IN 14321-2:2005 건물의 유리 - 열적 알칼리 토금속 규산염 안전 강화 유리 - 부품 2: 적합성 / 제품 표준의 평가

IN 14322:2004 Wood-based panels – Melamine faced boards for interior uses – Definition, requirements and classification

IN 14323:2004 Wood-based panels – Melamine faced boards for interior uses – Test methods

IN 14324:2004 Brazing – Guidance on the application of brazed joints

IN 14325:2004 Protective clothing against chemicals – Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages

IN 14328:2005 Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods

IN 14329:2004 Inland navigation vessels – Installation of berths and loading areas

IN 14330:2003 Inland navigation vessels – Studless anchor chain – Round steel link chain

IN 14331:2004 Liquid petroleum products – Separation and characterisation of fatty acid methyl esters (명성) from middle distillates – Liquid chromatography (LC)/gas chromatography (GC) method

IN 14341:2006 Industrial valves – Steel check valves

IN 14351-1:2006+A1:2010 창문과 문 - 제품 표준, 성능 특성 - 파트 1: 저항없이 Windows 및 외부 보행자 doorsets는 화재 및 / 또는 연기 누설 특성에

IN 14354:2004 Wood-based panels – Wood veneer floor covering

IN 14354:2004/AC:2006 Wood-based panels – Wood veneer floor covering

IN 14358:2006 Timber structures – Calculation of characteristic 5-percentile values and acceptance criteria for a sample

IN 14359:2006+A1:2010 Gas-loaded accumulators for fluid power applications

IN 14360:2004 Protective clothing against rain – Test method for ready made garments – Impact from above with high energy droplets

IN 14361:2004 Aluminium and aluminium alloys – Chemical analysis – Sampling from metal melts

IN 14364:2013 Plastics piping systems for drainage and sewerage with or without pressure – Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) – Specifications for pipes, fittings and joints

IN 14366:2004 Laboratory measurement of noise from waste water installations

IN 14367:2005 Non controllable backflow preventer with different pressure zones – Family C, type A

IN 14374:2004 목재 구조 - 구조 적층 한척 목재 - 요구 사항

IN 14387:2004+A1:2008 Respiratory protective devices – Gas filter(의) and combined filter(의) - 요구 사항, 테스트, 마킹

IN 14390:2007 Fire test – Large-scale room reference test for surface products

IN 14392:2007 Aluminium and aluminium alloys – Requirements for anodised products for use in contact with foodstuff

IN 14394:2005+A1:2008 Heating boilers – Heating boilers with forced draught burners – Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 ° C

IN 14395-1:2004 Influence of organic materials on water intended for human consumption – Organoleptic assessment of water in storage systems – Part 1: Test method

IN 14399-10:2009 파트 - 사전로드에 대한 고강도 구조 탈당 어셈블리 10: System HRC – Bolt and nut assemblies with calibrated preload

IN 14399-7:2007 파트 - 사전로드에 대한 고강도 구조 탈당 어셈블리 7: System HR – Countersunk head bolt and nut assemblies

IN 14399-8:2007 파트 - 사전로드에 대한 고강도 구조 탈당 어셈블리 8: System HV – Hexagon fit bolt and nut assemblies

IN 14399-9:2009 파트 - 사전로드에 대한 고강도 구조 탈당 어셈블리 9: System HR or HV – Direct tension indicators for bolt and nut assemblies

IN 14404:2004+A1:2010 Personal protective equipment – Knee protectors for work in the kneeling position

IN 14406:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the expansion ratio and expansion evolution

IN 144-1:2000 Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector

IN 144-1:2000/A1:2003 Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector

IN 144-1:2000/A2:2005 Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector

IN 14411:2012 세라믹 타일 - 정의, 분류, characteristics, 적합성 평가 및 표시

IN 14419:2009 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Surveillance systems

IN 144-2:1998 Respiratory protective devices – Gas cylinder valves – Part 2: Outlet connections

IN 14420-7:2013 Hose fittings with clamp units – Part 7: Cam locking couplings

IN 14420-8:2013 Hose fittings with clamp units – Part 8: Symmetrical half coupling (Guillemin system)

IN 14428:2004+A1:2008 샤워 인클로저 - 기능 요구 사항 및 시험 방법

IN 144-3:2003 Respiratory protective devices – Gas cylinder valves – Part 3: Outlet connections for diving gases Nitrox and oxygen

IN 144-3:2003/AC:2003 Respiratory protective devices – Gas cylinder valves – Part 3: Outlet connections for diving gases Nitrox and oxygen

IN 14435:2004 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only – Requirements, 테스트, 마킹

IN 14436:2004 Copper and copper alloys – Electrolytically tinned strip

IN 14437:2004 Determination of the uplift resistance of installed clay or concrete tiles for roofing – Roof system test method

IN 14438:2006 Gas-fired insets for heating more than one room

IN 14439:2006+A2:2009 크레인 - 안전 - 타워 크레인

IN 1444:2000 Fibre-cement pipelines – Guide for laying and on-site work practices

IN 14449:2005 건물의 유리 - 접합 유리 및 접합 안전 유리 - 적합 / 제품 기준의 평가

IN 14449:2005/AC:2005 건물의 유리 - 접합 유리 및 접합 안전 유리 - 적합 / 제품 기준의 평가

IN 14451:2005 Devices to prevent pollution by backflow of potable water – In-line anti-vacuum valves DN 8 to DN 80 – Family D, type A

IN 14452:2005 Devices to prevent pollution by backflow of potable water – Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 – Family D, type B

IN 14453:2005 Devices to prevent pollution by backflow of potable water – Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 – Family D, type C

IN 14454:2005 Devices to prevent pollution by backflow of potable water – Hose union backflow preventer DN 15 to DN 32 – Family H, type A

IN 14455:2005 Devices to prevent pollution by backflow of potable water – Presssurised air inlet valves DN 15 to DN 50 – Family L, type A and type B

IN 14458:2004 Personal eye-equipment – Faceshields and visors for use with firefighters’ and high performance industrial safety helmets used by firefighters, ambulance and emergency services

IN 14459:2007 Control functions in electronic systems for gas burners and gas burning appliances – Methods for classification and assessment

IN 14459:2007/AC:2009 Control functions in electronic systems for gas burners and gas burning appliances – Methods for classification and assessment

IN 14468-1:2004 Table tennis – Part 1: Table tennis tables, functional and safety requirements, 시험 방법

IN 14468-2:2005 Table tennis – Part 2: Posts for net assemblies – Requirements and test methods

IN 1447:2009+A1:2010 플라스틱 배관 시스템 - 유리 섬유 강화 열경화성 플라스틱 (GRP) pipes – Determination of long-term resistance to internal pressure

IN 14487-1:2005 Sprayed concrete – Part 1: 정의, 사양 및 적합성

IN 14487-2:2006 Sprayed concrete – Part 2: Execution

IN 14488-1:2005 Testing sprayed concrete – Sampling fresh and hardened concrete

IN 14488-2:2006 Testing sprayed concrete – Part 2: Compressive strength of young sprayed concrete

IN 14488-3:2006 Testing sprayed concrete – Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

IN 14488-4:2005+A1:2008 Testing sprayed concrete – Part 4: Bond strength of cores by direct tension

IN 14488-5:2006 Testing sprayed concrete – Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens

IN 14488-6:2006 Testing sprayed concrete – Part 6: Thickness of concrete on a substrate

IN 14488-7:2006 Testing sprayed concrete – Part 7: Fibre content of fibre reinforced concrete

IN 14492-1:2006+A1:2009 크레인 - 전원 구동 윈치 및 호이스트 - 부품 1: 전원 구동 윈치

IN 14492-1:2006+A1:2009/AC:2010 크레인 - 전원 구동 윈치 및 호이스트 - 부품 1: 전원 구동 윈치

IN 14492-2:2006+A1:2009 크레인 - 전원 구동 윈치 및 호이스트 - 부품 2: 전원 구동 호이스트

IN 14492-2:2006+A1:2009/AC:2010 크레인 - 전원 구동 윈치 및 호이스트 - 부품 2: 전원 구동 호이스트

IN 14497:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the filtration stability

IN 14497:2004/AC:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the filtration stability

IN 14498:2004 Products and systems for the protection and repair of concrete structures – Test methods – Volume and weight changes of injection products after air drying and water storage cycles

IN 14499:2004 Textile floor coverings – Minimum requirements for carpet underlays

IN 145:1997 Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, 테스트, 마킹

IN 145:1997/A1:2000 Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, 테스트, 마킹

IN 14500:2008 Blinds and shutters – Thermal and visual comfort – Test and calculation methods

IN 14501:2005 Blinds and shutters – Thermal and visual comfort – Performance characteristics and classification

IN 14502-1:2010 크레인 - 사람의 리프팅 장비 - 부품 1: Suspended baskets

IN 14502-2:2005+A1:2008 크레인 - 사람의 리프팅 장비 - 부품 2: 엘리베이터 용 제어 국

IN 14503:2003 Inland navigation vessels – Harbours for inland navigation

IN 14504:2009 Inland navigation vessels – Floating landing stages – Requirements, 테스트

IN 14509:2013 자활 이중 선체 금속 패널을 절연 직면했다 - 공장 제품을 만든 - 사양

IN 1451-1:1998 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polypropylene (PP) - 부품 1: 파이프 사양, 피팅 및 시스템

IN 14511-1:2013 에어컨, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 1: 이용 약관, definitions and classification

IN 14511-2:2013 에어컨, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 2: Test conditions

IN 14511-3:2013 에어컨, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 3: 시험 방법

IN 14511-4:2013 에어컨, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 4: Operating requirements, marking and instructions

IN 14513:2005 Transportable gas cylinders – Bursting disc pressure relief devices (excluding acetylene gas cylinders)

IN 14516:2006+A1:2010 국내 목적을 위해 욕조

IN 14518:2005 Ventilation for buildings – Chilled beams – Testing and rating of passive chilled beams

IN 14521:2004 Resilient floor coverings – Specification for smooth rubber floor coverings with or without foam backing with a decorative layer

IN 14527:2006+A1:2010 국내 목적을 위해 샤워 트레이

IN 14528:2007 비데 - 기능 요구 사항 및 시험 방법

IN 14529:2005 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only

IN 14530:2004 Workplace atmospheres – Determination of diesel particulate matter – General requirements

IN 1453-1:2000 Plastics piping systems with structured wall-pipes for soil and waste discharge (low and high temperature) inside buildings – Unplasticized poly(비닐 클로라이드) (PVC-U) - 부품 1: Specifications for pipes and the system

IN 14532-1:2004 Welding consumables – Test methods and quality requirements – Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys

IN 14532-2:2004 Welding consumables – Test methods and quality requirements – Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys

IN 14532-3:2004 Welding consumables – Test methods and quality requirements – Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys

IN 14538:2006 Fat and oil derivatives – Fatty acid methyl ester (명성) – Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)

IN 14545:2008 목재 구조 - 커넥터 - 요구 사항

IN 1455-1:1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Acrylonitrile-butadiene-styrene (ABS) - 부품 1: Requirements for pipes, 피팅 및 시스템

IN 14565:2004 Resilient floor coverings – Floor coverings based upon synthetic thermoplastic polymers – Specification

IN 14583:2004 Workplace atmospheres – Volumetric bioaerosol sampling devices – Requirements and test methods

IN 14584:2013 Non-destructive testing – Acoustic emission testing – Examination of metallic pressure equipment during proof testing – Planar location of AE sources

IN 1459:1998+A3:2012 자주식 변수 범위 트럭 - 산업 트럭의 안전

IN 14592:2008+A1:2012 목재 구조 - 맞춤 형 패스너 - 요구 사항

IN 14593-1:2005 Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 1: Apparatus with a full face mask – Requirements, 테스트, 마킹

IN 14593-2:2005 Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 2: Apparatus with a half mask at positive pressure – Requirements, 테스트, 마킹

IN 14593-2:2005/AC:2005 Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 2: Apparatus with a half mask at positive pressure – Requirements, 테스트, 마킹

IN 14594:2005 Respiratory protective devices – Continuous flow compressed air line breathing apparatus – Requirements, 테스트, 마킹

IN 14594:2005/AC:2005 Respiratory protective devices – Continuous flow compressed air line breathing apparatus – Requirements, 테스트, 마킹

IN 14600:2005 Doorsets and openable windows with fire resisting and/or smoke control characteristics – Requirements and classification

IN 14604:2005 화재 경보 장치

IN 14604:2005/AC:2008 화재 경보 장치

IN 14605:2005+A1:2009 Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])

IN 14606:2004 Inland navigation vessels – Studless anchor chain – Accessories

IN 14608:2004 Windows – Determination of the resistance to racking

IN 14609:2004 Windows – Determination of the resistance to static torsion

IN 14610:2004 Welding and allied processes – Definitions of metal welding processes

IN 14617-16:2005 Agglomerated stone – Test methods – Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles

IN 14617-8:2007 Agglomerated stone – Test methods – Part 8: Determination of resistance to fixing (dowel hole)

IN 14617-9:2005 Agglomerated stone – Test methods – Part 9: Determination of impact resistance

IN 14619:2004 Roller sports equipment – Kick scooters – Safety requirements and test methods

IN 1462:2004 Brackets for eaves gutters – Requirements and testing

IN 14620-1:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 ° C - 부품 1: General

IN 14620-2:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 ° C - 부품 2: Metallic components

IN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 ° C - 부품 3: Concrete components

IN 14620-4:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 ° C - 부품 4: Insulation components

IN 14620-5:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 ° C - 부품 5: Testing, drying, purging and cool-down

IN 14629:2007 Products and systems for the protection and repair of concrete structures – Test methods – Determination of chloride content in hardened concrete

IN 14630:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of carbonation depth in hardened concrete by the phenolphthalein method

IN 14636-1:2009 Plastics piping systems for non-pressure drainage and sewerage – Polyester resin concrete (PRC) - 부품 1: Pipes and fittings with flexible joints

IN 14636-2:2009 Plastics piping systems for non-pressure drainage and sewerage – Polyester resin concrete (PRC) - 부품 2: 맨홀 및 검사 실

IN 14637:2007 Building hardware – Electrically controlled hold-open systems for fire/smoke door assemblies – Requirements, 시험 방법, application and maintenance

IN 14638-1:2006 Transportable gas cylinders – Refillable welded receptacles of a capacity not exceeding 150 litres – Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods

IN 14638-3:2010 Transportable gas cylinders – Refillable welded receptacles of a capacity not exceeding 150 litres – Part 3: Welded carbon steel cylinders made to a design justified by experimental methods

IN 14638-3:2010/AC:2012 Transportable gas cylinders – Refillable welded receptacles of a capacity not exceeding 150 litres – Part 3: Welded carbon steel cylinders made to a design justified by experimental methods

IN 14647:2005 칼슘 알루미 네이트 시멘트 - 조성, 사양 및 적합성 기준

IN 14647:2005/AC:2006 칼슘 알루미 네이트 시멘트 - 조성, 사양 및 적합성 기준

IN 14648:2007 Building hardware – Fittings for shutters – Requirements and test methods

IN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support – Part 1: 제품 사양

IN 14653-2:2005 Manually operated hydraulic shoring systems for groundwork support – Part 2: 계산 또는 시험에 의한 평가

IN 14655:2005+A1:2010 식품 가공 기계 - 바게트 슬라이서 - 안전 및 위생 요구 사항

IN 14688:2006 위생 용품 - 세면대 - 기능 요구 사항 및 시험 방법

IN 1470:2008 Textile floor coverings – Classification of needled floor coverings except for needled pile floor coverings

IN 14700:2005 Welding consumables – Welding consumables for hard-facing

IN 14705:2005 Heat exchangers – Method of measurement and evaluation of thermal performances of wet cooling towers

IN 14706:2012 Thermal insulating products for building equipment and industrial installations – Determination of maximum service temperature

IN 14707:2012 Thermal insulating products for building equipment and industrial installations – Determination of maximum service temperature for preformed pipe insulation

IN 1471:1996 Textile floor coverings – Assessment of changes in appearance

IN 1471:1996/A1:2003 Textile floor coverings – Assessment of changes in appearance

IN 14714:2005 Inland navigation vessels – Connection nozzle for equipment and devices at cargo tanks – Dimensions

IN 14717:2005 Welding and allied processes – Environmental check list

IN 14726:2005 Aluminium and aluminium alloys – Chemical analysis – Guideline for spark optical emission spectrometric analysis

IN 14741:2006 Thermoplastics piping and ducting systems – Joints for buried non-pressure applications – Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure

IN 14744:2005 Inland navigation vessels and sea-going vessels – Navigation light

IN 14744:2005/AC:2006 Inland navigation vessels and sea-going vessels – Navigation light

IN 14755:2005 Extruded particleboards – Specifications

IN 14758-1:2012 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene with mineral modifiers (PP-MD) - 부품 1: 파이프 사양, 피팅 및 시스템

IN 14759:2005 Shutters – Acoustic insulation relative to airborne sound – Expression of performance

IN 14768:2005 섬유판 드럼 - 이동식 머리 (열기 머리를) drums with slip on lids with a nominal capacity of 5 L에 600 l

IN 14772:2005 Flanges and their joints – Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 및 EN 12560

IN 14774-1:2009 Solid biofuels – Determination of moisture content – Oven dry method – Part 1: Total moisture – Reference method

IN 14774-2:2009 Solid biofuels – Determination of moisture content – Oven dry method – Part 2: Total moisture – Simplified method

IN 14774-3:2009 Solid biofuels – Determination of moisture content – Oven dry method – Part 3: Moisture in general analysis sample

IN 14782:2006 지붕에 대한 자체 지원하는 금속 시트, 외부 클래딩 및 내부 안감 - 제품 사양 및 요구 사항

IN 14783:2013 지붕에 대한 완전 지원되는 금속 시트 및 스트립, 외부 클래딩 및 내부 안감 - 제품 사양 및 요구 사항

IN 14784-1:2005 Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 1: Classification of systems

IN 14784-2:2005 Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 2: General principles for testing of metallic materials using X-rays and gamma rays

IN 14786:2006 Protective clothing – Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions – Atomizer test

IN 14802:2005 Plastics piping systems – Thermoplastics shafts or risers for inspection chambers and manholes – Determination of resistance against surface and traffic loading

IN 148-1:1999 Respiratory protective devices – Threads for facepieces – Part 1: Standard thread connection

IN 148-2:1999 Respiratory protective devices – Threads for facepieces – Part 2: Centre thread connection

IN 14820:2004 Single-use containers for human venous blood specimen collection

IN 14825:2013 에어컨, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling – Testing and rating at part load conditions and calculation of seasonal performance

IN 14829:2007 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW 급

IN 148-3:1999 Respiratory protective devices – Threads for facepieces – Part 3: Tread connection M 45 x 3

IN 14830:2006 Thermoplastics inspection chamber and manhole bases – Test methods for buckling resistance

IN 14832:2005 Petroleum and related products – Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids

IN 14833:2005 Petroleum and related products – Determination of the hydrolytic stability of fire-resistant phosphate ester fluids

IN 14845-1:2007 Test methods for fibres in concrete – Part 1: Reference concretes

IN 14845-2:2006 Test methods for fibres in concrete – Part 2: Effect on concrete

IN 14846:2008 잠금과 래치 - - 하드웨어를 구축 요구 사항 및 시험 방법 - 전기 기계적 잠금 및 눈에 띄는 접시 운영

IN 1486:2007 Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting

IN 1487:2000 Building valves – Hydraulic safety groups – Tests and requirements

IN 14870-1:2011 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Part 1: Induction bends (ISO 15590-1:2009 수정)

IN 14870-2:2004 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Part 2: 피팅 (ISO 15590-2:2003 수정)

IN 14870-3:2006 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Part 3: 플랜지 (ISO 15590-3:2004, 수정)

IN 14874:2005 Inland navigation vessels – Studless anchor chain – Cable lifter

IN 14876:2007 Transportable gas cylinders – Periodic inspection and testing of welded steel pressure drums

IN 1488:2000 Building valves – Expansion groups – Tests and requirements

IN 14886:2008 플라스틱 및 고무 기계 - 블록 발포체 Bandknife 절단 기계 - 안전 요구 사항

IN 14889-1:2006 콘크리트 용 섬유 - 부품 1: 강철 섬유 - 정의, 사양 및 적합성

IN 14889-2:2006 콘크리트 용 섬유 - 부품 2: 고분자 섬유 - 정의, 사양 및 적합성

IN 1489:2000 Building valves – Pressure safety valves – Tests and requirements

IN 14891:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives – Requirements, 시험 방법, 적합성 평가, 분류 및 지정

IN 14891:2012/AC:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives – Requirements, 시험 방법, 적합성 평가, 분류 및 지정

IN 14893:2006 LPG equipment and accessories – Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres

IN 14893:2006/AC:2007 LPG equipment and accessories – Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres

IN 149:2001+A1:2009 호흡 보호 장치 - 입자로부터 보호하기 위해 필터링 절반 마스크 - 요구 사항, 테스트, 마킹

IN 1490:2000 결합 온도와 압력 릴리프 밸브 - - 테스트 및 요구 사항 밸브 구축

IN 14900:2006 섬유 바닥 깔개 - 섬유 양털 뒷면의 밀도의 결정

IN 14908-1:2005 빌딩 자동화의 개방형 데이터 통신, 제어 및 건물 관리 - 제어 네트워크 프로토콜 - 제 1: 프로토콜 스택

IN 14908-2:2005 빌딩 자동화의 개방형 데이터 통신, 제어 및 건물 관리 - 제어 네트워크 프로토콜 - 제 2: 트위스트 페어 통신

IN 14908-3:2006 빌딩 자동화의 개방형 데이터 통신, 제어 및 건물 관리 - 제어 네트워크 프로토콜 - 제 3: 전력선 채널 지정

IN 14908-4:2006 빌딩 자동화의 개방형 데이터 통신, 제어 및 건물 관리 - 제어 네트워크 프로토콜 - 제 4: IP 통신

IN 14908-5:2009 빌딩 자동화의 개방형 데이터 통신, 제어 및 빌딩 관리 구현 가이드 라인 - 제어 네트워크 프로토콜 - 제 5: 이행

IN 1491:2000 건물의 밸브 - 확장 밸브 - 테스트 및 요구 사항

IN 14910:2007+A1:2009 정원 장비 - 대형 뒤에 연소 엔진 파워 트리머 - 안전

IN 1492-1:2000+A1:2008 섬유 슬링 - 안전 - 제 1: 범용 사용을위한 인공 섬유로 만든 플랫 짠 웨빙 슬링

IN 1493:2010 자동차 리프트

IN 14930:2007+A1:2009 농업 및 임업 기계 및 정원 장비 - 보행자 제어 및 핸드 헬드 시스템 - 뜨거운 표면의 접근성의 결정

IN 14933:2007 보온과 가벼운 무게는 토목 공학 응용을위한 제품을 채우기 - 공장 확장 폴리스티렌 제품을 만들어 (EPS) - 사양

IN 14934:2007 보온과 가벼운 무게는 토목 공학 응용을위한 제품을 채우기 - 공장 압출 발포 폴리스티렌의 제품을 만들어 (XPS) - 사양

IN 14935:2006 구리 및 구리 합금 - 순수 구리 불순물의 결정 - ET AAS 방법

IN 14936-1:2006 Copper and copper alloys – Determination of aluminium content – Part 1: Titrimetric method

IN 14936-2:2006 Copper and copper alloys – Determination of aluminium content – Part 2: FAAS method

IN 14937-1:2006 Copper and copper alloys – Determination of antimony content – Part 1: Spectrophotometric method

IN 14937-2:2006 Copper and copper alloys – Determination of antimony content – Part 2: FAAS method

IN 14938-2:2010 Copper and copper alloys – Determination of bismuth content – Part 2: Flame atomic absorption spectrometric method (FAAS)

IN 14939:2006 Copper and copper alloys – Determination of beryllium content – FAAS method

IN 1494:2000+A1:2008 모바일 또는 이동 잭 및 관련 리프팅 장비

IN 14940-2:2006 Copper and copper alloys – Determination of chromium content – Part 2: FAAS method

IN 14941:2006 Copper and copper alloys – Determination of cobalt content – FAAS method

IN 14942-2:2006 Copper and copper alloys – Determination of arsenic content – Part 2: FAAS method

IN 1495:1997+A2:2009 마스트 클라이밍 작업 플랫폼 - 플랫폼을 리프팅

IN 1495:1997+A2:2009/AC:2010 마스트 클라이밍 작업 플랫폼 - 플랫폼을 리프팅

IN 14957:2006+A1:2010 식품 가공 기계 - 컨베이어와 기계 주방용 - 안전 및 위생 요구 사항

IN 14958:2006+A1:2009 식품 가공 기계 - 밀가루와 양질의 거친 밀가루를 분쇄 및 처리 기계 - 안전 및 위생 요구 사항

IN 1496:2006 Personal fall protection equipment – Rescue lifting devices

IN 14960:2013 Inflatable play equipment – Safety requirements and test methods

IN 14963:2006 지붕 장선 - 또는 기립하지 않고 플라스틱의 연속 rooflights - 분류, 요구 사항과 시험 방법

IN 14964:2006 불연속 루핑 강성 언더 - 정의 및 특성

IN 14965:2005 Inland navigation vessels – Flat bollards

IN 1497:2007 Personal fall protection equipment – Rescue harnesses

IN 14974:2006+A1:2010 Facilities for users of roller sports equipment – Safety requirements and test methods

IN 14975:2006+A1:2010 Loft ladders – Requirements, marking and testing

IN 14977:2006 Copper and copper alloys – Detection of tensile stress – 5 % ammonia test

IN 14978:2006 Laminate floor coverings – Elements with acrylic based surface layer, electron beam cured – Specifications, 요구 사항과 시험 방법

IN 1498:2006 Personal fall protection equipment – Rescue loops

IN 14982:2006+A1:2010 Plastics piping and ducting systems – Thermoplastics shafts or risers for inspection chambers and manholes – Determination of ring stiffness

IN 14985:2012 크레인 - 돌리기 지브 크레인

IN 14988-1:2006+A1:2012 Children’s high chairs – Part 1: 안전 요구 사항

IN 14988-2:2006+A1:2012 Children’s high chairs – Part 2: 시험 방법

IN 15000:2008 자기가 변수 범위 트럭을 추진 - - 사양 산업 트럭의 안전, 길이 방향의 부하 모멘트 지표와 세로 방향 하중 모멘트 리미터의 성능 및 시험 요구 사항

IN 15004-10:2008 Fixed firefighting systems – Gas extinguishing systems – Part 10: Physical properties and system design of gas extinguishing systems for IG-541 extinguishant (ISO 14520-15:2005, 수정)

IN 15004-7:2008 Fixed firefighting systems – Gas extinguishing systems – Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12:2005, 수정)

IN 15004-8:2008 Fixed firefighting system – Gas extinguishing systems – Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2005, 수정)

IN 15004-9:2008 Fixed firefighting systems – Gas extinguishing systems – Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14:2005, 수정)

IN 15011:2011 크레인 - 다리와 갠트리 크레인

IN 15012:2007 Plastics piping systems – Soil and waste discharge systems within the building structure – Performance characteristics for pipes, fittings and their joints

IN 15014:2007 Plastics piping systems – Buried and above ground systems for water and other fluids under pressure – Performance characteristics for pipes, fittings and their joints

IN 15015:2007 Plastics piping systems – Systems for hot and cold water not intended for human consumption – Performance characteristics for pipes, fittings and their joints

IN 1502:1995 Inland navigation vessels – Boarding ladders

IN 15022-3:2006 Copper and copper alloys – Determination of tin content – Part 3: Low tin content – Flame atomic absorption spectrometry method (FAAS)

IN 15022-4:2011 Copper and copper alloys – Determination of tin content – Part 4: Medium tin content – Flame atomic absorption spectrometric method (FAAS)

IN 15023-3:2010 Copper and copper alloys – Determination of nickel content – Part 3: Flame atomic absorption spectrometric method (FAAS)

IN 15024-2:2006 Copper and copper alloys – Determination of zinc content – Part 2: Flame atomic absorption spectrometry method (FAAS)

IN 15025:2010 Copper and copper alloys – Determination of magnesium content – Flame atomic absorption spectrometric method (FAAS)

IN 15026:2007 건물 구성 요소와 건물 요소의 Hygrothermal 성능 - 수치 시뮬레이션에 의한 수분 이동의 평가

IN 15027:2007+A1:2009 운송 할 수있는 벽 톱과 와이어 작업 현장에 장비를 보았다 - 안전

IN 1503-1:2000 밸브 - 몸 재료, 보닛 및 커버 - 제 1: 유럽 표준에 지정된 강의

IN 1503-2:2000 밸브 - 몸 재료, 보닛 및 커버 - 제 2: 유럽 표준에 명시되지 않은 다른 강의

IN 1503-3:2000 밸브 - 몸 재료, 보닛 및 커버 - 제 3: 유럽 표준에 지정된 아이언 캐스트

IN 1503-3:2000/AC:2001 밸브 - 몸 재료, 보닛 및 커버 - 제 3: 유럽 표준에 지정된 아이언 캐스트

IN 1503-4:2002 밸브 - 몸 재료, 보닛 및 커버 - 제 4: 유럽 표준에 지정된 구리 합금

IN 15034:2006 가열 보일러 - 연료 유를위한 응축 보일러

IN 15034:2006/AC:2008 가열 보일러 - 연료 유를위한 응축 보일러

IN 15035:2006 가열 보일러 - 오일에 대한 특별 요구 사항까지 방 밀봉 유닛을 발사 70 kW 급

IN 15036-1:2006 가열 보일러 - 열 발전기 공기 소음 방출에 대한 시험 규정 - 제 1: 열 발전기 공기 소음 방출

IN 15036-2:2006 가열 보일러 - 열 발전기 공기 소음 방출에 대한 시험 규정 - 제 2: 발열 장치의 출구에서의 배기 가스 배출 소음

IN 1504-1:2005 제품 및 콘크리트 구조물의 보호 및 복구를위한 시스템 - 정의, 요구 사항, 품질 관리 및 적합성 평가 - 부품 1: 정의

IN 1504-10:2003 Products and systems for the protection and repair of concrete structures – Definitions – Requirements – Quality control and evaluation of conformity – Part 10: Site application of products and systems and quality control of the works

IN 1504-10:2003/AC:2005 Products and systems for the protection and repair of concrete structures – Definitions – Requirements – Quality control and evaluation of conformity – Part 10: Site application of products and systems and quality control of the works

IN 1504-2:2004 제품 및 콘크리트 구조물의 보호 및 복구를위한 시스템 - 정의, 요구 사항, 품질 관리 및 적합성 평가 - 부품 2: 콘크리트 표면 보호 시스템

IN 1504-3:2005 제품 및 콘크리트 구조물의 보호 및 복구를위한 시스템 - 정의, 요구 사항, 품질 관리 및 적합성 평가 - 부품 3: 구조적 및 비 구조적 수리

IN 1504-4:2004 제품 및 콘크리트 구조물의 보호 및 복구를위한 시스템 - 정의, 요구 사항, 품질 관리 및 적합성 평가 - 부품 4: 구조 결합

IN 1504-5:2013 제품 및 콘크리트 구조물의 보호 및 복구를위한 시스템 - 정의, 요구 사항, 품질 관리 및 적합성 평가 - 부품 5: 콘크리트 주입

IN 1504-6:2006 제품 및 콘크리트 구조물의 보호 및 복구를위한 시스템 - 정의, 요구 사항, 품질 관리 및 적합성 평가 - 부품 6: 철강 철근의 고정

IN 1504-7:2006 제품 및 콘크리트 구조물의 보호 및 복구를위한 시스템 - 정의, 요구 사항, 품질 관리 및 적합성 평가 - 부품 7: 철근 부식 방지

IN 1504-8:2004 제품 및 콘크리트 구조물의 보호 및 복구를위한 시스템 - 정의, 요구 사항, 품질 관리 및 적합성 평가 - 부품 8: Quality control and evaluation of conformity

IN 1504-9:2008 제품 및 콘크리트 구조물의 보호 및 복구를위한 시스템 - 정의, 요구 사항, 품질 관리 및 적합성 평가 - 부품 9: General principles for the use of products and systems

IN 15051:2006 Workplace atmospheres – Measurement of the dustiness of bulk materials – Requirements and reference test methods

IN 15056:2006+A1:2009 크레인 - 컨테이너 처리 살포기에 대한 요구 사항

IN 15059:2009 눈 손질 장비 - 안전 요구 사항

IN 15060:2006 Paints and varnishes – Guide for the classification and selection of coating systems for wood based materials in furniture for interior use

IN 15063-1:2006 Copper and copper alloys – Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - 부품 1: Guidelines to the routine method

IN 15063-2:2006 Copper and copper alloys – Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - 부품 2: Routine method

IN 15067:2007 플라스틱 및 고무 기계 - 가방과 자루를위한 필름 변환 기계 - 안전 요구 사항

IN 15079:2007 Copper and copper alloys – Analysis by spark source optical emission spectrometry (S-OES)

IN 15080-12:2011 Extended application of results from fire resistance tests – Part 12: Loadbearing masonry walls

IN 15080-8:2009 Extended application of results from fire resistance tests – Part 8: 빔

IN 15081:2007 Industrial valves – Mounting kits for part-turn valve actuator attachment

IN 15088:2005 알루미늄 및 알루미늄 합금 - 건설 작업을위한 구조 제품 - 검사 및 전달을위한 기술적 조건

IN 1509:2008 Playing field equipment – Badminton equipment – Functional and safety requirements, 시험 방법

IN 15095:2007+A1:2008 전원 작동하는 모바일 벽돌 쌓기 및 선반, 회전 목마 및 스토리지 리프트 - 안전 요구 사항

IN 1510:2004 Playing field equipment – Tennis equipment – Functional and safety requirements, 시험 방법

IN 15101-1:2013 Thermal insulation products for buildings – In-situ formed loose fill cellulose (LFCI) 제품 - 부품 1: Specification for the products before installation

IN 15101-2:2013 Thermal insulation products for buildings – In-situ formed loose fill cellulose (LFCI) 제품 - 부품 2: Specification for the installed products

IN 15102:2007+A1:2011 장식 벽지 - 롤 및 패널 형태

IN 15114:2006+A1:2008 Textile floor coverings – Classification of textile floor coverings without pile

IN 15115:2006 Textile floor coverings – Determination of sensitivity to spilled water

IN 1514-1:1997 Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 1: 삽입 유무에 관계없이 비 금속 평면 가스켓

IN 1514-2:2005 Flanges and their joints – Gaskets for PN-designated flanges – Part 2: 스틸 플랜지와 함께 사용하기위한 나선형 부상 틈막이

IN 1514-3:1997 Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 3: 비금속 PTFE 봉투 가스켓

IN 1514-4:1997 Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 4: 골판지, 스틸 플랜지와 함께 사용하기위한 평면 또는 홈이 금속 채워진 금속 가스켓

IN 1514-6:2003 Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 6: 스틸 플랜지와 함께 사용하기위한 대상 톱니 모양의 금속 가스켓

IN 1514-7:2004 Flanges and their joints – Gaskets for PN-designated flanges – Part 7: 스틸 플랜지와 함께 사용하기위한 대상 금속 외피 가스켓

IN 1514-8:2004 Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 8: Polymeric O-Ring gaskets for grooved flanges

IN 15149-1:2010 Solid biofuels – Determination of particle size distribution – Part 1: Oscillating screen method using sieve apertures of 1 mm and above

IN 15149-2:2010 Solid biofuels – Determination of particle size distribution – Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below

IN 1515-1:1999 Flanges and their joints – Bolting – Part 1: Selection of bolting

IN 15151-1:2012 Mountaineering equipment – Braking devices – Part 1: Braking devices with manually assisted locking, safety requirements and test methods

IN 15151-2:2012 Mountaineering equipment – Braking devices – Part 2: Manual braking devices, safety requirements and test methods

IN 1515-2:2001 Flanges and their joints – Bolting – Part 2: Classification of bolt materials for steel flanges, PN designated

IN 1515-3:2005 Flanges and their joints – Bolting – Part 3: Classification of bolt materials for steel flanges, class designated

IN 1515-4:2009 Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC

IN 15162:2008 기계 및 광산 및 자연적인 돌의 공구를위한 식물 - 갱 톱에 대한 안전 요구 사항

IN 15163:2008 기계 및 자연적인 돌의 착취와 처리를위한 설치 - 안전 - 다이아몬드 와이어 톱을위한 요구 사항

IN 15164:2008 기계 및 광산 및 자연적인 돌의 공구를위한 식물 - 안전 - 체인에 대한 요구 사항- 벨트 - 슬로 팅 기계

IN 15166:2008 식품 가공 기계 - 도살 시체의 자동 다시 분할 기계 - 안전 및 위생 요구 사항

IN 15167-1:2006 콘크리트에 사용하는 고로 슬래그, 박격포와 그라우트 - 부품 1: 정의, 사양 및 적합성 기준

IN 15167-2:2006 콘크리트에 사용하는 고로 슬래그, 박격포와 그라우트 - 부품 2: 적합성 평가

IN 1518:1998 Non-destructive testing – Leak testing – Characterization of mass spectrometer leak detectors

IN 15181:2008 Measuring method of the energy consumption of gas fired ovens

IN 15183:2006 Products and systems for the protection and repair of concrete structures – Test methods – Corrosion protection test

IN 15184:2006 Products and systems for the protection and repair of concrete structures – Test methods – Shear adhesion of coated steel to concrete (pull-out test)

IN 1519-1:1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polyethylene (PE) - 부품 1: 파이프 사양, 피팅 및 시스템

IN 15195:2007 Liquid petroleum products – Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber

IN 15197:2007 Wood-based panels – Flaxboards – Specifications

IN 15199-1:2006 Petroleum products – Determination of boiling range distribution by gas chromatography method – Part 1: Middle distillates and lubricating base oils

IN 15199-2:2006 Petroleum products – Determination of boiling range distribution by gas chromatography method – Part 2: Heavy distillates and residual fuels

IN 15199-3:2008 Petroleum products – Determination of boiling range distribution by gas chromatography method – Part 3: Crude oil

IN 152:2011 Wood preservatives – Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service – Laboratory method

IN 15213-1:2013 Intelligent transport systems – After-theft systems for the recovery of stolen vehicles – Part 1: 참조 아키텍처 및 용어

IN 15213-2:2013 Intelligent transport systems – After-theft systems for the recovery of stolen vehicles – Part 2: Common status message elements

IN 15213-3:2013 Intelligent transport systems – After-theft systems for the recovery of stolen vehicles – Part 3: Interface and system requirements in terms of short range communication system

IN 15213-4:2013 Intelligent transport systems – After-theft systems for the recovery of stolen vehicles – Part 4: Interface and system requirements in terms of long range communication system

IN 15213-5:2013 Intelligent transport systems – After-theft systems for the recovery of stolen vehicles – Part 5: Messaging interface

IN 15217:2007 Energy performance of buildings – Methods for expressing energy performance and for energy certification of buildings

IN 15218:2013 Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling – Terms, definitions, test conditions, test methods and requirements

IN 1522:1998 윈도우, 문, shutters and blinds – Bullet resistance – Requirements and classification

IN 15224:2012 Health care services – Quality management systems – Requirements based on EN ISO 9001:2008

IN 15228:2009 Structural timber – Structural timber preservative treated against biological attack

IN 1523:1998 윈도우, 문, shutters and blinds – Bullet resistance – Test method

IN 1525:1997 Safety of industrial trucks – Driverless trucks and their systems

IN 15254-5:2009 Extended application of results from fire resistance tests – Non-loadbearing walls – Part 5: Metal sandwich panel construction

IN 15254-7:2012 Extended application of results from fire resistance tests – Non-loadbearing ceilings – Part 7: Metal sandwich panel construction

IN 15255:2007 Energy performance of buildings – Sensible room cooling load calculation – General criteria and validation procedures

IN 1526:1997+A1:2008 산업용 트럭의 안전 - 트럭에 자동화 기능을위한 추가 요구 사항

IN 15265:2007 Energy performance of buildings – Calculation of energy needs for space heating and cooling using dynamic methods – General criteria and validation procedures

IN 15269-1:2010 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware – Part 1: 일반 요구 사항

IN 15269-10:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware – Part 10: Fire resistance of steel rolling shutter assemblies

IN 15269-7:2009 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware – Part 7: Fire resistance for steel sliding doorsets

IN 1527:2013 Building hardware – Hardware for sliding doors and folding doors – Requirements and test methods

IN 15270:2007 Pellet burners for small heating boilers – Definitions, 요구 사항, 테스트, 마킹

IN 15271:2007 Inland navigation vessels – Studless anchor chain – Anchor equipment

IN 15272-1:2007 Inland navigation vessels – Equipment for rope leading – Part 1: 일반 요구 사항

IN 15272-2:2007 Inland navigation vessels – Equipment for rope leading – Part 2: Fairlead

IN 15272-3:2007 Inland navigation vessels – Equipment for rope leading – Part 3: Roller fairleads

IN 15272-4:2007 Inland navigation vessels – Equipment for rope leading – Part 4: Rope lead

IN 15288-1:2008+A1:2010 Swimming pools – Part 1: Safety requirements for design

IN 15288-2:2008 Swimming pools – Part 2: Safety requirements for operation

IN 1529:1999 Doors leaves – Height, width, thickness and squareness – Tolerance classes

IN 153:2006 Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics

IN 1530:1999 Door leaves – General and local flatness – Tolerance classes

IN 15305:2008 Non-destructive Testing – Test Method for Residual Stress analysis by X-ray Diffraction

IN 15305:2008/AC:2009 Non-destructive Testing – Test Method for Residual Stress analysis by X-ray Diffraction

IN 15312:2007+A1:2010 Free access multi-sports equipment – Requirements, including safety and test methods

IN 15316-4-7:2008 Heating systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 4-7: Space heating generation systems, biomass combustion systems

IN 15316-4-8:2011 Heating systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 4-8: Space heating generation systems, air heating and overhead radiant heating systems

IN 15317:2013 Non-destructive testing – Ultrasonic testing – Characterization and verification of ultrasonic thickness measuring equipment

IN 15332:2007 Heating boilers – Energy assessment of hot water storage systems

IN 15333-1:2008 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 1: Demand apparatus

IN 15333-1:2008/AC:2009 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 1: Demand apparatus

IN 15333-2:2009 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 2: Free flow apparatus

IN 15368:2008+A1:2010 정의 - 비 구조 애플리케이션을위한 유압 바인더, 사양 및 적합성 기준

IN 15376:2011 Automotive fuels – Ethanol as a blending component for petrol – Requirements and test methods

IN 15389:2008 Industrial valves – Performance characteristics of thermoplastic valves when used as construction products

IN 1540:2011 Workplace exposure – Terminology

IN 15414-3:2011 Solid recovered fuels – Determination of moisture content using the oven dry method – Part 3: Moisture in general analysis sample

IN 15415-1:2011 Solid recovered fuels – Determination of particle size distribution – Part 1: Screen method for small dimension particles

IN 15416-4:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic – Test methods – Part 4: Determination of open assembly time for one component polyurethane adhesives

IN 15417:2006 Gas-fired central heating boilers – Specific requirements for condensing boilers with a nominal heat input greater than 70 kW but not exceeding 1000 kW 급

IN 1542:1999 Products and systems for the protection and repair of concrete structures – Test methods – Measurement of bond strength by pull-off

IN 1543:1998 Products and systems for the protection and repair of concrete structures – Test methods – Determination of tensile strength development for polymers

IN 1544:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars

IN 15456:2008 Heating boilers – Electrical power consumption for heat generators – System boundaries – Measurements

IN 15457:2007 Paints and varnishes – Laboratory method for testing the efficacy of film preservatives in a coating against fungi

IN 15458:2007 Paints and varnishes – Laboratory method for testing the efficacy of film preservatives in a coating against algae

IN 15468:2007 Laminate floor coverings – Elements with directly applied printing and resin surface layer – Specifications, 요구 사항과 시험 방법

IN 15469:2007 Petroleum products – Test method for free water in liquefied petroleum gas by visual inspection

IN 15470:2007 Liquefied petroleum gases – Determination of dissolved residues – High temperature Gas chromatographic method

IN 15471:2007 Liquefied petroleum gases – Determination of dissolved residues – High-temperature gravimetric method

IN 15484:2007 Ethanol as a blending component for petrol – Determination of inorganic chloride – Potentiometric method

IN 15485:2007 Ethanol as a blending component for petrol – Determination of sulfur content – Wavelength dispersive X-ray fluorescence spectrometric method

IN 15486:2007 Ethanol as a blending component for petrol – Determination of sulfur content – Ultraviolet fluorescence method

IN 15487:2007 Ethanol as a blending component for petrol – Determination of phosphorus content – Ammonium molybdate spectrometric method

IN 15488:2007 Ethanol as a blending component for petrol – Determination of copper content – Graphite furnace atomic absorption spectrometric method

IN 15489:2007 Ethanol as a blending component for petrol – Determination of water content – Karl Fischer coulometric titration method

IN 15490:2007 Ethanol as a blending component for petrol – Determination of pHe

IN 15491:2007 Ethanol as a blending component for petrol – Determination of total acidity – Colour indicator titration method

IN 15492:2012 Ethanol as a blending component for petrol – Determination of inorganic chloride and sulfate content – Ion chromatographic method

IN 15495:2007 Non Destructive testing – Acoustic emission – Examination of metallic pressure equipment during proof testing – Zone location of AE sources

IN 1550:1997+A1:2008 공작 기계 안전 - 척을 잡고 작업의 설계 및 건설에 대한 안전 요구 사항

IN 15501:2013 Thermal insulation products for building equipment and industrial installations – Factory made expanded perlite (EP) and exfoliated vermiculite (HOME) 제품 - 사양

IN 15502-1:2012 Gas-fired heating boilers – Part 1: 일반 요구 사항 및 시험

IN 15502-2-1:2012 Gas-fired central heating boilers – Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW 급

IN 15503:2009+A1:2013 정원 장비 - 정원 송풍기, 진공 송풍기 / 진공 - 안전

IN 15530:2008 Aluminium and aluminium alloys – Environmental aspects of aluminium products – General guidelines for their inclusion in standards

IN 15553:2007 Petroleum products and related materials – Determination of hydrocarbon types – Fluorescent indicator adsorption method

IN 15567-1:2007 Sports and recreational facilities – Ropes courses – Part 1: Construction and safety requirements

IN 15567-2:2007 Sports- and recreational facilities – Ropes courses – Part 2: Operation requirements

IN 15573:2008 Earth-moving machinery – Design requirements for circulation on the road

IN 1559-4:1999 Founding – Technical conditions of delivery – Part 4: Additional requirements for aluminium alloy castings

IN 15599-1:2010 건설 장비 및 산업 설비 용 열 절연 제품 - 원위치 확장 펄라이트 형성 보온 (EP) 제품 - 부품 1: 설치하기 전에 결합 느슨한 채우기 제품 사양

IN 15599-2:2010 건설 장비 및 산업 설비 용 열 절연 제품 - 원위치 확장 펄라이트 형성 보온 (EP) 제품 - 부품 2: Specification for the installed products

IN 15600-1:2010 건설 장비 및 산업 설비 용 열 절연 제품 - 원위치 박리 질석 형성 보온 (HOME) 제품 - 부품 1: 설치하기 전에 결합 느슨한 채우기 제품 사양

IN 15600-2:2010 건설 장비 및 산업 설비 용 열 절연 제품 - 원위치 박리 질석 형성 보온 (HOME) 제품 - 부품 2: Specification for the installed products

IN 15605:2010 Copper and copper alloys – Inductively coupled plasma optical emission spectrometry

IN 15616:2012 Copper and copper alloys – Determination of cadmium content – Flame atomic absorption spectrometric method (FAAS)

IN 15622:2010 Copper and copper alloys – Determination of lead content – Flame atomic absorption spectrometric method (FAAS)

IN 15632-1:2009 District heating pipes – Pre-insulated flexible pipe systems – Part 1: 분류, general requirements and test methods

IN 15632-2:2010 District heating pipes – Pre-insulated flexible pipe systems – Part 2: Bonded plastic service pipes – Requirements and test methods

IN 15632-3:2010 District heating pipes – Pre-insulated flexible pipe systems – Part 3: Non bonded system with plastic service pipes; 요구 사항과 시험 방법

IN 15632-4:2009 District heating pipes – Pre-insulated flexible pipe systems – Part 4: Bonded system with metal service pipes; 요구 사항과 시험 방법

IN 15638:2009 Ice skates – Safety requirements and test methods

IN 15649-1:2009+A1:2012 Floating leisure articles for use on and in the water – Part 1: 분류, materials, general requirements and test methods

IN 15649-2:2009+A2:2013 Floating leisure articles for use on and in the water – Part 2: Consumer information

IN 15649-3:2009+A1:2012 Floating leisure articles for use on and in the water – Part 3: Additional specific safety requirements and test methods for Class A devices

IN 15649-4:2010+A1:2012 Floating leisure articles for use on and in the water – Part 4: Additional specific safety requirements and test methods for Class B devices

IN 15649-5:2009 Floating leisure articles for use on and in the water – Part 5: Additional specific safety requirements and test methods for Class C devices

IN 15649-6:2009 Floating leisure articles for use on and in the water – Part 6: Additional specific safety requirements and test methods for Class D devices

IN 15649-7:2009 Floating leisure articles for use on and in the water – Part 7: Additional specific safety requirements and test methods for class E devices

IN 1565-1:1998 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Styrene copolymer blends (SAN PVC) - 부품 1: 파이프 사양, 피팅 및 시스템

IN 15657-1:2009 Acoustic properties of building elements and of buildings – Laboratory measurement of airborne and structure borne sound from building equipment – Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example

IN 1566-1:1998 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Chlorinated poly(비닐 클로라이드) (PVC-C) - 부품 1: 파이프 사양, 피팅 및 시스템

IN 15684:2012 Building hardware – Mechatronic cylinders – Requirements and test methods

IN 15686:2010 Railway applications – Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G

IN 15690-2:2009 Copper and copper alloys – Determination of iron content – Part 2: Flame atomic absorption spectrometric method (FAAS)

IN 15691:2009 Ethanol as a blending component for petrol – Determination of dry residue (involatile material) – Gravimetric method

IN 15692:2009 Ethanol as a blending component for petrol – Determination of water content – Karl Fischer potentiometric titration method

IN 15694:2009 Agricultural and forestry tractors – Passenger seat – Requirements and test procedures

IN 15695-1:2009 농업 트랙터 및 자체 추진 스프레이 - 작업자의 보호 (운전사) 유해 물질에 대한 - 부품 1: 택시 분류, 요건 및 시험 방법

IN 15695-2:2009 농업 트랙터 및 자체 추진 스프레이 - 작업자의 보호 (운전사) 유해 물질에 대한 - 부품 2: 필터, 요건 및 시험 방법

IN 15695-2:2009/AC:2011 Agricultural tractors and self-propelled sprayers — Protection of the operator (운전사) against hazardous substances — Part 2: 필터, 요건 및 시험 방법

IN 15698-1:2009 District heating pipes – Preinsulated bonded twin pipe systems for directly buried hot water networks – Part 1: Twin pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene

IN 1570-1:2011 테이블을 리프팅에 대한 안전 요구 사항 - 부품 1: 두 개의 고정 착륙까지 제공하는 리프트 테이블

IN 15714-1:2009 Industrial valves – Actuators – Part 1: Terminology and definitions

IN 15714-2:2009 Industrial valves – Actuators – Part 2: Electric actuators for industrial valves – Basic requirements

IN 15714-3:2009 Industrial valves – Actuators – Part 3: Pneumatic part-turn actuators for industrial valves – Basic requirements

IN 15714-4:2009 Industrial valves – Actuators – Part 4: Hydraulic part-turn actuators for industrial valves – Basic requirements

IN 15715:2009 Thermal insulation products – Instructions for mounting and fixing for reaction to fire testing – Factory made products

IN 15721:2013 Ethanol as a blending component for petrol – Determination of higher alcohols, methanol and other impurities – Gas chromatographic method

IN 15725:2010 Extended application reports on the fire performance of construction products and building elements

IN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA) – Expanded clay lightweight aggregate products (LWA)

IN 15736:2009 Timber Structures – Test methods – Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses

IN 15737:2009 Timber Structures – Test methods – Torsional resistance of driving in screws

IN 15743:2010 Supersulfated 시멘트 - 구성, 사양 및 적합성 기준

IN 15751:2009 Automotive fuels – Fatty acid methyl ester (명성) fuel and blends with diesel fuel – Determination of oxidation stability by accelerated oxidation method

IN 15769:2009 Ethanol as a blending component of petrol – Determination of appearance – Visual method

IN 15772:2012 Textile floor coverings – Minimum requirements for needled floor coverings for single usage in events of limited duration

IN 15773:2009 Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] – Specifications, recommendations and guidelines

IN 15774:2010 식품 가공 기계 - 신선한 채워진 파스타를 처리하기위한 기계 (국수, 넬로, 라비올리, 토르 텔리 니, 오라 케이티와 뇨키) - 안전 및 위생 요구 사항

IN 15776:2011 Unfired pressure vessels – Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %

IN 15779:2009+A1:2013 Petroleum products and fat and oil derivates – Fatty acid methyl esters (명성) for diesel engines – Determination of polyunsaturated (=4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography

IN 15811:2009 농업 기계 - 동력 전달 부품을 이동 보호대 - 도구 가드 오프닝 (ISO / TS 28923:2007 수정)

IN 15811:2009/AC:2010 농업 기계 - 동력 전달 부품을 이동 보호대 - 도구 가드 오프닝 (ISO / TS 28923:2007 수정)

IN 15824:2009 외부에 대한 사양 렌더링 및 내부 석고 유기 바인더에 근거

IN 15830:2012 Rough-terrain variable reach trucks – Visibility – Test methods and verification

IN 15837:2009 Ethanol as a blending component for petrol – Determination of phosphorus, copper and sulfur content – Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)

IN 15856:2010 Non-destructive testing – Acoustic emission – General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid

IN 15857:2010 Non-destructive testing – Acoustic emission – Testing of fibre-reinforced polymers – Specific methodology and general evaluation criteria

IN 15861:2012 Food processing machinery – Smokehouses – Safety and hygiene requirements

IN 15869-1:2010 Inland navigation vessels – Electrical shore connection, three phase current 400 V, 까지 63 A, 50 Hz – Part 1: 일반 요구 사항

IN 15869-2:2010 Inland navigation vessels – Electrical shore connection, three phase current 400 V, 까지 63 A, 50 Hz – Part 2: Onshore unit, 안전 요구 사항

IN 15869-3:2010 Inland navigation vessels – Electrical shore connection, three phase current 400 V, 까지 63 A, 50 Hz – Part 3: On-board unit, 안전 요구 사항

IN 15876-1:2010+A1:2012 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to EN 15509 - 부품 1: Test suite structure and test purposes

IN 15876-2:2011 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to EN 15509 - 부품 2: Abstract test suite

IN 15879-1:2011 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling – Part 1: Direct exchange-to-water heat pumps

IN 15882-1:2011 Extended application of results from fire resistance tests for service installations – Part 1: Ducts

IN 15882-3:2009 Extended applications of results from fire resistance tests for service installations – Part 3: Penetration seals

IN 1591-1:2001+A1:2009 Flanges and their joints – Design rules for gasketed circular flange connections – Part 1: Calculation method

IN 1591-1:2001+A1:2009/AC:2011 Flanges and their joints – Design rules for gasketed circular flange connections – Part 1: Calculation method

IN 1591-2:2008 Flanges and their joints – Design rules for gasketed circular flange connections – Part 2: Gasket parameters

IN 1591-4:2013 Flanges and their joints – Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems

IN 15915:2010 Copper and copper alloys – Determination of silver content – Flame atomic absorption spectrometric method (FAAS)

IN 15916-2:2010 Copper and copper alloys – Determination of tellurium content – Part 2: Medium tellurium content – Flame atomic absorption spectrometric method (FAAS)

IN 1592-4:1997 Aluminium and aluminium alloys – HF seam welded tubes – Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes

IN 1593:1999 비파괴 검사 - 누설 테스트 - 버블 방출 기술

IN 1593:1999/A1:2003 비파괴 검사 - 누설 테스트 - 버블 방출 기술

IN 15938:2010 자동차 연료 - 에탄올 혼합 성분 및 에탄올 (E85) 자동차 연료 - 전기 전도도의 측정

IN 15944:2010 액체 석유 제품 - 니켈 및 바나듐 함량의 결정 - 유도 결합 플라즈마 발광 분석법 광학적 방법 (ICP OES)

IN 15969-1:2011 탱크 차량 사이의 고정 시설을 갖춘 데이터 전송을위한 디지털 인터페이스 - - 위험화물 수송 용 탱크 부 1: 프로토콜 사양 - 제어, 측정 및 이벤트 데이터

IN 15969-2:2011 탱크 차량 사이의 고정 시설을 갖춘 데이터 전송을위한 디지털 인터페이스 - - 위험화물 수송 용 탱크 부 2: 상업 및 물류 데이터

IN 1598:2011 건강 및 용접의 안전과 동맹 공정 - 투명 용접 커튼, 아크 용접 프로세스를위한 스트립 및 스크린

IN 15984:2011 석유 산업 제품 - 정제 가열 가스의 조성 및 탄소 함량과 발열량 계산의 측정 - 기체 크로마토 그래피 법

IN 16000:2010 플라스틱 배관 시스템 - 건물 구조 내 시스템 - 실장 및 열 공격에 시험 장치의 구성 요소의 고정 단일 굽기 항목 별

IN 16002:2010 방수 유연한 시트 - 지붕 방수 기계적으로 고정 유연한 시트의 부하를 바람에 대한 저항의 측정

IN 16003:2011 칼슘 탄산 마그네슘 - 인간 소비를위한 물 처리에 사용되는 화학

IN 16004:2011 인간의 소비를위한 물 처리에 사용되는 화학 - 산화 마그네슘

IN 16005:2012 전원 작동 보행자 doorsets - 안전 사용 - 요구 사항 및 시험 방법

IN 16009:2011 Flameless explosion venting devices

IN 1601:1997 Liquid petroleum products – Unleaded petrol – Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)

IN 16012:2012 Thermal insulation for buildings – Reflective insulation products – Determination of the declared thermal performance

IN 16014:2011 Hardware for furniture – Strength and durability of locking mechanisms

IN 16016-1:2011 Non destructive testing – Radiation methods – Computed tomography – Part 1: 용어

IN 16016-2:2011 Non destructive testing – Radiation methods – Computed tomography – Part 2: 원리, equipment and samples

IN 16016-3:2011 Non destructive testing – Radiation methods – Computed Tomography – Part 3: Operation and interpretation

IN 16016-4:2011 Non destructive testing – Radiation methods – Computed tomography – Part 4: Qualification

IN 16018:2011 Non-destructive testing – Terminology – Terms used in ultrasonic testing with phased arrays

IN 1602:2013 Thermal insulating products for building applications – Determination of the apparent density

IN 16020:2011 Explosion diverters

IN 16024:2011 Fertilizers – Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea – Method using high-performance liquid chromatography (HPLC)

IN 16025-1:2013 Thermal and/or sound insulating products in building construction – Bound EPS ballastings – Part 1: 공장 혼합에 대한 요구 사항은 마른 석고 EPS

IN 16025-2:2013 Thermal and/ or sound insulating products in building construction – Bound EPS ballastings – Part 2: Processing of the factory premixed EPS dry plaster

IN 16027:2011 Protective clothing – Gloves with protective effect for association football goal keepers

IN 16028:2012 Railway applications – Wheel/rail friction management – Lubricants for trainborne and trackside applications

IN 1603:2013 Thermal insulating products for building applications – Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity)

IN 16031:2012 Adjustable telescopic aluminium props – Product specifications, 계산 및 시험에 의해 설계 및 평가

IN 16032:2011 Fertilizers – Extraction and determination of elemental sulfur

IN 16035:2012 Hardware performance sheet (HPS) – Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows

IN 16037:2012 Chemicals used for treatment of water intended for human consumption – Sodium hydrogen sulfate

IN 16038:2012 Chemicals used for treatment of water for swimming pools – Sodium hydrogen sulfate

IN 16039:2011 Water quality – Guidance standard on assessing the hydromorphological features of lakes

IN 1604:2013 Thermal insulating products for building applications – Determination of dimensional stability under specified temperature and humidity conditions

IN 1605:2013 Thermal insulating products for building applications – Determination of deformation under specified compressive load and temperature conditions

IN 16051-1:2012 Inflation devices and accessories for inflatable consumer products – Part 1: Compatibility of valves and valve adapters

IN 16051-2:2012 Inflation devices and accessories for inflatable consumer products – Part 2: 안전 요구 사항, durability, 공연, compatibility and test methods of inflators

IN 16055:2012 Leather – Raw bovine hides and skins – Description, presentation and preservation

IN 16056:2012 Influence of metallic materials on water intended for human consumption – Method to evaluate the passive behaviour of stainless steels

IN 16057:2012 Influence of metallic materials on water intended for human consumption – Determination of residual surface lead (Pb) – Extraction method

IN 16058:2012 Influence of metallic materials on water intended for human consumption – Dynamic rig test for assessment of surface coatings with nickel layers – Long-term test method

IN 1606:2013 Thermal insulating products for building applications – Determination of compressive creep

IN 16062:2011 Intelligent transport systems – eSafety – eCall high level application requirements (HLAP)

IN 16063:2011 Packaging – Rigid plastic containers – Nomenclature of plastic finishes

IN 16064:2011 Packaging – Rigid plastic containers – PET finish 30/25 High (18,5)

IN 16065:2011 Packaging – Rigid plastic containers – PET finish 30/25 낮은 (16,8)

IN 16066:2011 Packaging – Rigid plastic containers – PET finish 26,7 (lead 6,35)

IN 16067:2011 Packaging – Rigid plastic containers – PET finish 26,7 (lead 9,00)

IN 16068:2011 Packaging – Rigid plastic containers – PET finish 38

IN 16069:2012 Thermal insulation products for buildings – Factory made products of polyethylene foam (PEF) - 사양

IN 1607:2013 Thermal insulating products for building applications – Determination of tensile strength perpendicular to faces

IN 16072:2011 Intelligent transport systems – eSafety – Pan-European eCall operating requirements

IN 16074:2011 Paints and varnishes – Determination of non-volatile-matter content and spreading rate of coil coating materials

IN 16075:2011 Fertilizers – Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea – Method using high-performance liquid chromatography (HPLC)

IN 16079:2011 Founding – Compacted (vermicular) graphite cast irons

IN 1608:2013 Thermal insulating products for building applications – Determination of tensile strength parallel to faces

IN 16083:2012 Paddles and oars for recreational boats – Safety requirements and test methods

IN 16084:2011 Refrigerating systems and heat pumps – Qualification of tightness of components and joints

IN 16086-1:2011 Soil improvers and growing media – Determination of plant response – Part 1: Pot growth test with Chinese cabbage

IN 16086-2:2011 Soil improvers and growing media – Determination of plant response – Part 2: Petri dish test using cress

IN 16087-1:2011 Soil improvers and growing media – Determination of the aerobic biological activity – Part 1: Oxygen uptake rate (OUR)

IN 16087-2:2011 Soil improvers and growing media – Determination of the aerobic biological activity – Part 2: Self heating test for compost

IN 1609:2013 Thermal insulating products for building applications – Determination of short term water absorption by partial immersion

IN 16090:2011 Copper and copper alloys – Estimation of average grain size by ultrasound

IN 16091:2011 Liquid petroleum products – Middle distillates and fatty acid methyl ester (명성) fuels and blends – Determination of oxidation stability by rapid small scale oxidation method

IN 16094:2012 Laminate floor coverings – Test method for the determination of micro-scratch resistance

IN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances

IN 1610:1997 Construction and testing of drains and sewers

IN 16101:2012 Water quality – Guidance standard on interlaboratory comparison studies for ecological assessment

IN 16102:2011 Intelligent transport systems – eCall – Operating requirements for third party support

IN 16105:2011 Paints and varnishes – Laboratory method for determination of release of substances from coatings in intermittent contact with water

IN 16109:2011 Fertilizers – Determination of complexed micro-nutrient ions in fertilizers – Identification of lignosulfonates

IN 1611-1:1999 Sawn timber – Appearance grading of softwoods – Part 1: European spruces, firs, pines and Douglas firs

IN 1611-1:1999/A1:2002 Sawn timber – Appearance grading of softwoods – Part 1: European spruces, firs, pines, Douglas fir and larches

IN 16116-1:2013 Railway applications – Design requirements for steps, handrails and associated access for staff – Part 1: Passenger vehicles, luggage vans and locomotives

IN 16116-2:2013 Railway applications – Design requirements for steps, handrails and associated access for staff – Part 2: Freight wagons

IN 16117-1:2011 Copper and copper alloys – Determination of copper content – Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %

IN 16117-2:2012 Copper and copper alloys – Determination of copper content – Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %

IN 16119:2013 LPG equipment and accessories – Sealing caps and plugs for LPG cylinder and pressure vessel valves – Specification and testing

IN 16120:2012 Child use and care articles – Chair mounted seat

IN 1612-1:1997+A1:2008 플라스틱 및 고무 기계 - 반응 성형기 - 파트 1: 계량 및 단위를 혼합에 대한 안전 요구 사항

IN 16121:2013 Non-domestic storage furniture – Requirements for safety, strength, durability and stability

IN 16122:2012 Domestic and non-domestic storage furniture – Test methods for the determination of strength, durability and stability

IN 16123:2013 Characterization of waste – Guidance on selection and application of screening methods

IN 16124:2011 Founding – Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications

IN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin

IN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures

IN 16135:2011 Automotive fuels – Determination of manganese content in unleaded petrol – Flame atomic absorption spectrometric method (FAAS)

IN 16136:2011 Automotive fuels – Determination of manganese content in unleaded petrol – Inductively coupled plasma optical emission spectrometry (ICP OES) method

IN 16139:2013 Furniture – Strength, durability and safety – Requirements for non-domestic seating

IN 16139:2013/AC:2013 Furniture – Strength, durability and safety – Requirements for non-domestic seating

IN 1614:2006 Health informatics – Representation of dedicated kinds of property in laboratory medicine

IN 16140:2011 Natural stone test methods – Determination of sensitivity to changes in appearance produced by thermal cycles

IN 16143:2013 Petroleum products – Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils – Procedure using double LC cleaning and GC/MS analysis

IN 16144:2012 Liquid petroleum products – Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels – Fixed range injection period, constant volume combustion chamber method

IN 16145:2012 Sanitary tapware – Extractable outlets for sink and basin mixers – General technical specification

IN 16146:2012 Sanitary tapware – Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 – General technical specification

IN 16147:2011 Heat pumps with electrically driven compressors – Testing and requirements for marking of domestic hot water units

IN 16147:2011/AC:2011 Heat pumps with electrically driven compressors – Testing and requirements for marking of domestic hot water units

IN 1615:2000 Enteral feeding catheters and enteral giving sets for single use and their connectors – Design and testing

IN 16150:2012 Water quality – Guidance on pro-rata Multi-Habitat sampling of benthic macro-invertebrates from wadeable rivers

IN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, 벽과 천장 - 요구 사항 및 시험 방법

IN 16155:2012 Foodstuffs – Determination of sucralose – High performance liquid chromatographic method

IN 16159:2012 Animal feeding stuffs – Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)

IN 1616:1997 Sterile urethral catheters for single use

IN 1616:1997/A1:1999 Sterile urethral catheters for single use

IN 16161:2012 Water quality – Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples

IN 16164:2013 Water quality – Guidance standard for designing and selecting taxonomic keys

IN 1617:1997 Sterile drainage catheters and accessory devices for single use

IN 1618:1997 Catheters other than intravascular catheters – Test methods for common properties

IN 1619:1996 Biotechnology – Large-scale process and production – General requirements for management and organization for strain conservation procedures

| 1 || 2 || 3 |

ASTM E283 – 04 (2012) 공기누설 시험2014년 1월 10일 - 2:28 오후
[공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  
MIL-Spec Documents2013년 12월 11일 - 6:40 오후
MIL-사양, MIL-STD 자료 상담 MIL-Spec Download,ko(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.
MIL-STD-810G 시험항목2017년 8월 18일 - 12:43 오후
아래는 MIL-STD-810G Part Two,,ko,높은 온도 MIL-STD-810G 방법,,en,저온 MIL-STD-810G 방법,,en,온도 충격 MIL-STD-810G 방법,,en,유체 MIL-STD-810G 방법에 의한 오염,,en,MIL-STD-810G 방법을 비,,en,습도 MIL-STD-810G 방법,,en,곰팡이 MIL-STD-810G 방법,,en (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]
IP Code2016년 4월 12일 - 6:42 오후
IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]
ASTM E119 Fire Testing2016년 3월 25일 - 8:01 오후
ASTM E 119 – 건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84, NFPA 285, UL 790, BS 476-6/7, NF P92-507, FROM 4102, IN 13501, GB 8624, BS 476-20，IN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

© 저작권 - [AP Network 인증원-해외 제품 시험인증 상담,,ko,자동차 OEM 규격시험,,ko | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | FROM | IN, GOST-R | 테스트 & 증명서 | - 웹 페이지는 Performancenetwork Inc.에 의해 구축.

RSS