STD-EN 1XXXX Conti 3

| 1 || 2 || 3 |

IN 16192:2011 Characterization of waste – Analysis of eluates

IN 16194:2012 Mobile non-sewer-connected toilet cabins – Requirements of services and products relating to the deployment of cabins and sanitary products

IN 16195:2012 Fertilizers – Determination of chlorides in the absence of organic material

IN 16196:2012 Fertilizers – Manganimetric determination of extracted calcium following precipitation in the form of oxalate

IN 16197:2012 Fertilizers – Determination of magnesium by atomic absorption spectrometry

IN 16198:2012 Fertilizers – Determination of magnesium by complexometry

IN 16199:2012 Fertilizers – Determination of the sodium extracted by flame-emission spectrometry

IN 1620:1996 Biotechnology – Large-scale process and production – Plant building according to the degree of hazard

IN 16204:2012 Foodstuffs – Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS

IN 16205:2013 Laboratory measurement of walking noise on floors

IN 16206:2012 Animal feeding stuffs – Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)

IN 16210:2013 Transportation loads – Measurement and evaluation of climatic and other loads – Data acquisition and general requirements for measuring equipment

IN 1621-1:2012 Motorcyclists’ protective clothing against mechanical impact – Part 1: Motorcyclists’ limb joint impact protectors – Requirements and test methods

IN 1621-2:2003 Motorcyclists’ protective clothing against mechanical impact – Part 2: Motorcyclists’ back protectors – Requirements and test methods

IN 1621-2:2003/AC:2006 Motorcyclists’ protective clothing against mechanical impact – Part 2: Motorcyclists’ back protectors – Requirements and test methods

IN 1621-4:2013 Motorcyclists’ protective clothing against mechanical impact – Part 4: Motorcyclists’ inflatable protectors – Requirements and test methods

IN 1622:2006 Water quality – Determination of the threshold odour number (TON) and threshold flavour number (TFN)

IN 16222:2012 Cathodic protection of ship hulls

IN 16223:2012 Leather – Requirements for the designation and description of leather in upholstery and automotive interior applications

IN 16232:2013 Child use and care articles – Infant swings

IN 16235:2013 Railway application – Testing for the acceptance of running characteristics of railway vehicles – Freight wagons – Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363

IN 16236:2013 Evaluation of conformity of aggregates – Initial Type Testing and Factory Production Control

IN 16237:2013 Classification of non-electrical sources of incoherent optical radiation

IN 1624:1999 Textiles and textile products – Burning behaviour of industrial and technical textiles – Procedure to determine the flame spread of vertically oriented specimens

IN 16245-1:2013 Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 1: 일반 요구 사항

IN 16245-2:2013 Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 2: Specific requirements for resin, curing systems, additives and modifiers

IN 16245-3:2013 Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 3: Specific requirements for fibre

IN 16245-4:2013 Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 4: Specific requirements for fabrics

IN 16245-5:2013 Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 5: Specific requirements for core materials

IN 16246:2012 Agricultural machinery – Backhoes – Safety

IN 16249:2013 Tanks for the transport of dangerous goods – Service equipment – Cap for the adaptor for bottom loading and unloading

IN 1625:1999 Textiles and textile products – Burning behaviour of industrial and technical textiles – Procedure to determine the ignitability of vertically oriented specimens

IN 16253:2013 Air quality – Atmospheric measurements near ground with active Differential Optical Absorption Spectroscopy (DOAS) – Ambient air and diffuse emission measurements

IN 16254:2013 Adhesives – Emulsion polymerized isocyanate (EPI) for load-bearing timber structures – Classification and performance requirements

IN 16256-1:2012 Pyrotechnic articles – Theatrical pyrotechnic articles – Part 1: 용어

IN 16256-2:2012 Pyrotechnic articles – Theatrical pyrotechnic articles – Part 2: Categories of theatrical pyrotechnic articles

IN 16256-3:2012 Pyrotechnic articles – Theatrical pyrotechnic articles – Part 3: Requirements for construction and performance

IN 16256-4:2012 Pyrotechnic articles – Theatrical pyrotechnic articles – Part 4: Minimum labelling requirements and instructions for use

IN 16256-5:2012 Pyrotechnic articles – Theatrical pyrotechnic articles – Part 5: 시험 방법

IN 16257:2012 Tanks for the transport of dangerous goods – Service equipment – Footvalve sizes other than 100 mm dia (nom)

IN 1626:2008 Cryogenic vessels – Valves for cryogenic service

IN 16260:2012 Water quality – Visual seabed surveys using remotely operated and/or towed observation gear for collection of environmental data

IN 16261-1:2012 Pyrotechnic articles – Fireworks, category 4 - 부품 1: 용어

IN 16261-2:2013 Pyrotechnic articles – Fireworks, Category 4 - 부품 2: 요구 사항

IN 16261-3:2012 Pyrotechnic articles – Fireworks, Category 4 - 부품 3: 시험 방법

IN 16261-4:2012 Pyrotechnic articles – Fireworks, Category 4 - 부품 4: Minimum labelling requirements and instructions for use

IN 16268:2013 Perfomance of reflecting surfaces for luminaires

IN 1627:2011 보행자 doorsets, 창, 커튼 벽 건설, grilles and shutters – Burglar resistance – Requirements and classification

IN 16270:2012 Automotive fuels – Determination of high-boiling components including fatty acid methyl esters in petrol – Gas chromatographic method

IN 16271:2012 Value management – Functional expression of the need and functional performance specification – Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product

IN 16272-1:2012 Railway applications – Track – Noise barriers and related devices acting on airborne sound propagation – Test method for determining the acoustic performance – Part 1: Intrinsic characteristics – Sound absorption in the laboratory under diffuse sound field conditions

IN 16272-2:2012 Railway applications – Track – Noise barriers and related devices acting on airborne sound propagation – Test method for determining the acoustic performance – Part 2: Intrinsic characteristics – Airborne sound insulation in the laboratory under diffuse sound field conditions

IN 16272-3-1:2012 Railway applications – Track – Noise barriers and related devices acting on airborne sound propagation – Test method for determining the acoustic performance – Part 3-1: Normalized railway noise spectrum and single number ratings for diffuse field applications

IN 16276:2013 Evacuation Lighting in Road Tunnels

IN 16277:2012 Animal feeding stuffs – Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide)

IN 1628:2011 보행자 doorsets, 창, 커튼 벽 건설, grilles and shutters – Burglar resistance – Test method for the determination of resistance under static loading

IN 16283:2013 Packaging – Flexible aluminium tubes – Test method to measure the force to pierce the membrane

IN 16284:2013 Packaging – Flexible laminate and plastic tubes – Test method to determine the adhesive strength of the membrane

IN 16285:2013 Packaging – Flexible aluminium tubes – Test method to measure the deformation of the aluminium tube body (Guillotine test)

IN 16286-1:2013 Railway applications – Gangway systems between vehicles – Part 1: Main applications

IN 16286-2:2013 Railway applications – Gangway systems between vehicles – Part 2: Acoustic measurements

IN 16289:2013 Glass packaging – Screw finishes for pressure capsules – MCA 7,5 RF finish

IN 1629:2011 보행자 doorsets, 창, 커튼 벽 건설, grilles and shutters – Burglar resistance – Test method for the determination of resistance under dynamic loading

IN 16291-1:2013 Glass packaging – Screw finishes for pressure capsules – Part 1: Returnable glass MCA 2 finish

IN 16291-2:2013 Glass packaging – Screw finishes for pressure capsules – Part 2: One way glass MCA 2 finish

IN 16292:2013 Glass packaging – Screw finishes – Depressed threads

IN 16293:2013 Packaging – Glass Packaging – Deep BVS finishes for still wines

IN 16294:2012 Petroleum products and fat and oil derivatives – Determination of phosphorus content in fatty acid methyl esters (명성) – Optical emission spectral analysis with inductively coupled plasma (ICP OES)

IN 16296:2012 Imperfections in thermoplastics welded joints – Quality levels

IN 16297-1:2012 Pumps – Rotodynamic pumps – Glandless circulators – Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI)

IN 16297-2:2012 Pumps – Rotodynamic pumps – Glandless circulators – Part 2: Calculation of energy efficiency index (EEI) for standalone circulators

IN 16297-3:2012 Pumps – Rotodynamic pumps – Glandless circulators – Part 3: Energy efficiency index (EEI) for circulators integrated in products

IN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations

IN 1630:2011 보행자 doorsets, 창, 커튼 벽 건설, grilles and shutters – Burglar resistance – Test method for the determination of resistance to manual burglary attempts

IN 16300:2012 Automotive fuels – Determination of iodine value in fatty acid methyl esters (명성) – Calculation method from gas chromatographic data

IN 16301:2013 Natural stone test methods – Determination of sensitivity to accidental staining

IN 16304:2013 Automatic vent valves for gas burners and gas burning appliances

IN 16306:2013 Natural stone test methods – Determination of resistance of marble to thermal and moisture cycles

IN 16307-1:2013 Industrial trucks – Safety requirements and verification – Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks

IN 16307-5:2013 Industrial trucks – Safety requirements and verification – Part 5: Supplementary requirements for pedestrian-propelled trucks

IN 16312:2013 Intelligent transport systems – Automatic Vehicle and Equipment Registration (AVI/AEI) – Interoperable application profile for AVI/AEI and Electronic Register Identification using dedicated short range communication

IN 16313:2013 Connections for heating and cooling appliances – Detachable connection with outside threaded pipe G ¾ A and inside cone

IN 16314:2013 Gas meters – Additional functionalities

IN 16317:2013 Fertilizers – Determination of trace elements – Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution

IN 16318:2013 Fertilizers – Determination of trace elements – Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)

IN 16319:2013 Fertilizers – Determination of trace elements – Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution

IN 16320:2013 Fertilizers – Determination of trace elements – Determination of mercury by vapour generation (VG) after aqua regia dissolution

IN 16328:2012 Fertilizers – Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP) – Method using high-performance liquid chromatography (HPLC)

IN 16329:2013 Diesel and domestic heating fuels – Determination of cold filter plugging point – Linear cooling bath method

IN 16337:2013 Hardware for furniture – Strength and loading capacity of shelf supports

IN 16339:2013 Ambient air – Method for the determination of the concentration of nitrogen dioxide by diffusive sampling

IN 1634-1:2008 Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware – Part 1: Fire resistance tests for doors, shutters and openable windows

IN 1634-2:2008 Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware – Part 2: Fire resistance characterisation test for elements of building hardware

IN 1634-3:2004 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware – Part 3: Smoke control test for door and shutter assemblies

IN 1634-3:2004/AC:2006 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware – Part 3: Smoke control test for door and shutter assemblies

IN 16348:2013 Gas infrastructure – Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines – Functional requirements

IN 16357:2013 Carbonate liming materials – Determination of reactivity – Automatic titration method with citric acid

IN 16361:2013 Power operated pedestrian doors – Product standard, performance characteristics – Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics

IN 16370:2013 Chemicals used for treatment of water intended for human consumption – Sodium chloride for on site electrochlorination using membrane cells

IN 16377:2013 Characterization of waste – Determination of brominated flame retardants (BFR) in solid waste

IN 1639:2009 Dentistry – Medical devices for dentistry – Instruments

IN 1640:2009 Dentistry – Medical devices for dentistry – Equipment

IN 16401:2013 Chemicals used for treatment of swimming pool water – Sodium chloride used for electrochlorinator systems

IN 16402:2013 Paints and varnishes – Assessment of emissions of substances from coatings into indoor air – Sampling, conditioning and testing

IN 1641:2009 Dentistry – Medical devices for dentistry – Materials

IN 16416:2013 Geosynthetic clay barriers – Determination of water flux index – Flexible wall permeameter method at constant head

IN 1642:2011 Dentistry – Medical devices for dentistry – Dental implants

IN 16423:2013 Liquefied petroleum gases – Determination of dissolved residue – Gas chromatographic method using liquid, on-column injection

IN 1643:2000 Valve proving systems for automatic shut-off valves for gas burners and gas appliances

IN 1644-1:1997 Test methods for nonwoven compresses for medical use – Part 1: Nonwovens used in the manufacture of compresses

IN 1644-2:2000 Test methods for nonwoven compresses for medical use – Part 2: Finished compresses

IN 16445:2013 Ventilation for buildings – Air diffusion – Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet

IN 1645-1:2012 Leisure accommodation vehicles – Caravans – Part 1: Habitation requirements relating to health and safety

IN 1645-2:2008 Leisure accommodation vehicles – Caravans – Part 2: User payload

IN 1646-1:2012 Leisure accommodation vehicles – Motor caravans – Part 1: Habitation requirements relating to health and safety

IN 1646-2:2008 Leisure accommodation vehicles – Motor caravans – Part 2: User payload

IN 1647:2012 Leisure accommodation vehicles – Caravan holiday homes – Habitation requirements relating to health and safety

IN 1648-1:2012 Leisure accommodation vehicles – 12 V direct current extra low voltage electrical installations – Part 1: Caravans

IN 1648-2:2012 Leisure accommodation vehicles – 12 V direct current extra low voltage electrical installations – Part 2: Motor caravans

IN 1649:2004 AIDC technologies – Operational aspects affecting the reading of bar code symbols

IN 1650:2008+A1:2013 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, 산업의, domestic and institutional areas – Test method and requirements (상 2, step 1)

IN 1651:1999 Paragliding equipment – Harnesses – Safety requirements and strength tests

IN 1652:1997 Copper and copper alloys – Plate, sheet, strip and circles for general purposes

IN 1652:1997/AC:2003 Copper and copper alloys – Plate, sheet, strip and circles for general purposes

IN 1653:1997 Copper and copper alloys – Plate, sheet and circles for boilers, pressure vessels and hot water storage units

IN 1653:1997/A1:2000 Copper and copper alloys – Plate, sheet and circles for boilers, pressure vessels and hot water storage units

IN 1654:1997 Copper and copper alloys – Strip for springs and connectors

IN 1654:1997/AC:2003 Copper and copper alloys – Strip for springs and connectors

IN 1655:1997 Copper and copper alloys – Declarations of conformity

IN 1656:2009 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area – Test method and requirements (상 2, step 1)

IN 1656:2009/AC:2010 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area – Test method and requirements (상 2, step 1)

IN 1657:2005 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area – Test method and requirements (상 2, step 1)

IN 1657:2005/AC:2007 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area – Test method and requirements (상 2, step 1)

IN 1659:1996 In vitro diagnostic systems – Culture media for microbiology – Terms and definitions

IN 166:2001 Personal eye-protection – Specifications

IN 1661:1997 Hexagon nuts with flange (ISO/DIS 4161:1996, 수정)

IN 1661:1997/AC:1998 Hexagon nuts with flange (ISO/DIS 4161:1996, 수정)

IN 1662:1997 Hexagon bolts with flange – Small series (ISO/DIS 15071:1996, 수정)

IN 1662:1997/AC:2007 Hexagon bolts with flange – Small series (ISO/DIS 15071:1996, 수정)

IN 1663:1997 Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, 수정)

IN 1664:1997 Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997, 수정)

IN 1665:1997 Hexagon bolts with flange – Heavy series

IN 1665:1997/AC:2007 Hexagon bolts with flange – Heavy series

IN 1666:1997 Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, 수정)

IN 1667:1997 Prevailing torque type all-metal hexagon nuts with flange metric fine pitch thread (ISO 12126:1997, 수정)

IN 1669:1996 Aluminium and aluminium alloys – Test methods – Earing test for sheet and strip

IN 167:2001 Personal eye-protection – Optical test methods

IN 1670:2007 Building hardware – Corrosion resistance – Requirements and test methods

IN 1670:2007/AC:2008 Building hardware – Corrosion resistance – Requirements and test methods

IN 1671:1997 Pressure sewerage systems outside buildings

IN 1672-2:2005+A1:2009 식품 가공 기계 - 기본 개념 - 부품 2: 위생 요구 사항

IN 1673:2000+A1:2009 식품 가공 기계 - 로타리 랙 오븐 - 안전 및 위생 요구 사항

IN 1674:2000+A1:2009 식품 가공 기계 - 반죽과 과자 브레이크 - 안전 및 위생 요구 사항

IN 1676:2010 Aluminium and aluminium alloys – Alloyed ingots for remelting – Specifications

IN 1677-1:2000+A1:2008 슬링에 대한 구성 요소 - 안전 - 제 1: 단조 부품, 학년 8

IN 1677-2:2000+A1:2008 슬링에 대한 구성 요소 - 안전 - 제 2: 래치와 단조 리프팅 후크, 학년 8

IN 1677-3:2001+A1:2008 슬링에 대한 구성 요소 - 안전 - 제 3: 단조자가 잠금 후크 - 등급 8

IN 1677-4:2000+A1:2008 슬링에 대한 구성 요소 - 안전 - 제 4: 링크, 학년 8

IN 1677-5:2001+A1:2008 슬링에 대한 구성 요소 - 안전 - 제 5: 학년 - 래치 철강 리프팅 후크를 단조 4

IN 1677-6:2001+A1:2008 슬링에 대한 구성 요소 - 안전 - 제 6: 링크 - 등급 4

IN 1678:1998+A1:2010 식품 가공 기계 - 야채 절단 기계 - 안전 및 위생 요구 사항

IN 1679-1:1998+A1:2011 내부 연소 엔진을 왕복 - 안전 - 제 1: 압축 착화 엔진

IN 168:2001 Personal eye-protection – Non-optical test methods

IN 1680:1997 Plastics piping systems – Valves for polyethylene (PE) piping systems – Test method for leaktightness under and after bending applied to the operating mechanisms

IN 169:2002 Personal eye-protection – Filters for welding and related techniques – Transmittance requirements and recommended use

IN 170:2002 Personal eye-protection – Ultraviolet filters – Transmittance requirements and recommended use

IN 1704:1997 Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after temperature cycling under bending

IN 1705:1996 Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after an external blow

IN 1706:2010 Aluminium and aluminium alloys – Castings – Chemical composition and mechanical properties

IN 1707:1996 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment – Lock fittings

IN 1708-1:2010 Welding – Basic welded joint details in steel – Part 1: Pressurized components

IN 1708-2:2000 Welding – Basic weld joint details in steel – Part 2: Non internal pressurized components

IN 1708-3:2012 Welding – Basic weld joint details in steel – Part 3: Clad, buttered and lined pressurized components

IN 1709:2004 Safety requirements for cableway installations designed to carry persons – Precommissioning inspection, maintenance, operational inspection and checks

IN 171:2002 Personal eye-protection – Infrared filters – Transmittance requirements and recommended use

IN 1710:2005+A1:2008 장비 및 지하 광산에서 잠재적으로 폭발 위험이있는 환경에서 사용하기위한 구성 요소

IN 1710:2005+A1:2008/AC:2010 장비 및 지하 광산에서 잠재적으로 폭발 위험이있는 환경에서 사용하기위한 구성 요소

IN 1711:2000 Non-destructive examination of welds – Eddy current examination of welds by complex plane analysis

IN 1711:2000/A1:2003 Non-destructive examination of welds – Eddy current examination of welds by complex plane analysis

IN 1715-1:2008 Aluminium and aluminium alloys – Drawing stock – Part 1: General requirements and technical conditions for inspection and delivery

IN 1715-2:2008 Aluminium and aluminium alloys – Drawing stock – Part 2: Specific requirements for electrical applications

IN 1715-3:2008 Aluminium and aluminium alloys – Drawing stock – Part 3: Specific requirements for mechanical uses (excluding welding)

IN 1715-4:2008 Aluminium and aluminium alloys – Drawing stock – Part 4: Specific requirements for welding applications

IN 1716:1997 플라스틱 배관 시스템 - 폴리에틸렌 (PE) tapping tees – Test method for impact resistance of an assembled tapping tee

IN 1717:2000 Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow

IN 1719:1998 Adhesives for paper and board, packaging and disposable sanitary products – Tack measurement for pressure sensitive adhesives – Determination of loop tack

IN 172:1994 Personal eye protection – Sunglare filters for industrial use

IN 172:1994/A1:2000 Personal eye-protection – Sunglare filters for industrial use

IN 172:1994/A2:2001 Personal eye protection – Sunglare filters for industrial use

IN 1720:1998 Adhesives for paper and board, 포장 및 일회용 위생 제품 - 산성의 결정

IN 1721:1998 Adhesives for paper and board, 포장 및 일회용 위생 제품 - 감압 성 접착제 트랙 측정 - 압연 공 트랙의 결정

IN 1725:1998 Domestic furniture – Beds and mattresses – Safety requirements and test methods

IN 1726-2:2000 Safety of Industrial Trucks – Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N – Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads

IN 1728:2012 Furniture – Seating – Test methods for the determination of strength and durability

IN 1728:2012/AC:2013 Furniture – Seating – Test methods for the determination of strength and durability

IN 1729-1:2006 Furniture – Chairs and tables for educational institutions – Part 1: Functional dimensions

IN 1729-2:2012 Furniture – Chairs and tables for educational institutions – Part 2: 안전 요구 사항 및 시험 방법

IN 1730:2012 Furniture – Tables – Test methods for the determination of stability, strength and durability

IN 1731:2006 Personal eye protection – Mesh eye and face protectors

IN 1734:1996 Rubber- or plastics coated fabrics – Determination of resistance to water penetration – Low pressure method

IN 1735:1996 Rubber- or plastics coated fabrics – Determination of flexibility

IN 1736:2008 Refrigerating systems and heat pumps – Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes – Requirements, design and installation

IN 1737:1998 Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure

IN 1738:1998 Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete

IN 1739:2007 Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure

IN 174:2001 Personal eye-protection – Ski goggles for downhill skiing

IN 1740:1998 Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components)

IN 1741:1998 Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure

IN 1742:1998 Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure

IN 1744-1:2009+A1:2012 Tests for chemical properties of aggregates – Part 1: 화학 분석

IN 1744-3:2002 Tests for chemical properties of aggregates – Part 3: Preparation of eluates by leaching of aggregates

IN 1744-4:2005 Tests for chemical properties of aggregates – Part 4: Determination of water susceptibility of fillers for bituminous mixtures

IN 1744-5:2006 Tests for chemical properties of aggregates – Part 5: 산 가용성 염화 염의 결정

IN 1744-6:2006 Tests for chemical properties of aggregates – Part 6: 시멘트의 초기 설정시에 순환 골재 추출물의 영향의 결정

IN 1744-7:2012 Tests for chemical properties of aggregates – Part 7: 시 소각로 바닥 재 집계의 점화 손실의 결정 (MIBA 집계)

IN 1744-8:2012 Tests for chemical properties of aggregates – Part 8: 테스트를 정렬하면시 소각로 바닥재의 금속 함량을 결정하는 (MIBA) 집계

IN 1745:2012 벽돌과 벽돌 제품 - 열적 특성을 결정하는 방법

IN 1746:1998 기계의 안전 - 안전 기준의 소음 조항의 초안 작성을위한 지침

IN 1748-1-1:2004 건물의 유리 - 특수 기본 제품 -Borosilicate 안경 - 부 1-1: 정의 및 일반 물리적, 기계적 특성

IN 1748-1-2:2004 유리 건물 - 특수 기본 제품 - 붕규산 유리 - 부품 1-2: 적합성 / 제품 표준의 평가

IN 1748-2-1:2004 특수 기본 제품 - 유리 - 도자기 - 부품을 구축 유리 2-1 Definitions and general physical and mechanical properties

IN 1748-2-2:2004 특수 기본 제품 - 유리 - 도자기 - 부품을 구축 유리 2-2: 적합성 / 제품 표준의 평가

IN 175:1997 Personal protection – Equipment for eye and face protection during welding and allied processes

IN 1751:1998 Ventilation for buildings – Air terminal devices – Aerodynamic testing of dampers and valves

IN 1753:1997 Magnesium and magnesium alloys – Magnesium alloy ingots and castings

IN 1753:1997/AC:1997 Magnesium and magnesium alloys – Magnesium alloy ingots and castings

IN 1754:1997 Magnesium and magnesium alloys – Magnesium and magnesium alloy anodes, ingots and castings – Designation system

IN 1755:2000+A2:2013 운영 잠재적으로 폭발 위험이있는 환경에서 - - 산업 트럭의 안전 가연성 가스 사용, 증기, 안개와 먼지

IN 1756-1:2001+A1:2008 안전 요구 사항 - - 플랫폼은 바퀴가 달린 차량에 장착 리프트 - 테일 리프트 부품 1: 꼬리는 상품에 대한 리프트

IN 1756-2:2004+A1:2009 안전 요구 사항 - - 플랫폼은 바퀴가 달린 차량에 장착 리프트 - 테일 리프트 부품 2: 꼬리 승객 리프트

IN 1757-3:2002 Safety of industrial trucks – Pedestrian controlled manual and semi-manual trucks – Part 3: Platform trucks

IN 1758:1997 Copper and copper alloys – Strip for lead frames

IN 1759-1:2004 Flanges and their joint – Circular flanges for pipes, 밸브, 피팅 및 액세서리, Class designated – Part 1: 스틸 플랜지, NPS 1/2 에 24

IN 1759-3:2003 플랜지와 자신의 관절 - 파이프 원형 플랜지, 밸브, 피팅 및 액세서리, Class designated – Part 3: 동합금 플랜지

IN 1759-3:2003/AC:2004 플랜지와 자신의 관절 - 파이프 원형 플랜지, 밸브, 피팅 및 액세서리, Class designated – Part 3: 동합금 플랜지

IN 1759-4:2003 Flanges and their joint – Circular flanges for pipes, 밸브, 피팅 및 액세서리, class designated – Part 4: 알루미늄 합금 플랜지

IN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery – Specification

IN 1762:2003 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPA는) - 사양

IN 1762:2003/AC:2007 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPA는) - 사양

IN 1765:2004 Rubber hose assemblies for oil suction and discharge services – Specification for the assemblies

IN 1766:2000 Products and systems for the protection and repair of concrete structures – Test methods – Reference concretes for testing

IN 1767:1999 Products and systems for the protection and repair of concrete structures – Test methods – Infrared analysis

IN 1770:1998 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the coefficient of thermal expansion

IN 1771:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of injectability and splitting test

IN 1771:2004/AC:2005 Products and systems for the protection and repair of concrete structures – Test methods – Determination of injectability and splitting test

IN 1772:2000 Surface active agents – Determination of wetting power by immersion (ISO 8022:1990 수정)

IN 1773:1996 Textiles – Fabrics – Determination of width and length

IN 1774:1997 Zinc and zinc alloys – Alloys for foundry purposes – Ingot and liquid

IN 1775:2007 Gas supply – Gas pipework for buildings – Maximum operating pressure less than or equal to 5 bar – Functional recommendations

IN 1776:1998 Gas supply systems – Natural gas measuring stations – Functional requirements

IN 1777:2010 유압 플랫폼 (HP가) 안전 요구 사항 및 시험 - 소방 및 구조 서비스

IN 1778:1999 Characteristic values for welded thermoplastics constructions – Determination of allowable stresses and moduli for design of thermoplastics equipment

IN 1779:1999 Non-destructive testing – Leak testing – Criteria for method and technique selection

IN 1779:1999/A1:2003 Non-destructive testing – Leak testing – Criteria for method and technique selection

IN 1780-1:2002 Aluminium and aluminium alloys – Designation of alloyed aluminium ingots for remelting, master alloys and castings – Part 1: Numerical designation system

IN 1780-2:2002 Aluminium and aluminium alloys – Designation of alloyed aluminium ingots for remelting, master alloys and castings – Part 2: Chemical symbol based designation system

IN 1780-3:2002 Aluminium and aluminium alloys – Designation of alloyed aluminium ingots for remelting, master alloys and castings – Part 3: Writing rules for chemical composition

IN 1783:1997 Matches – Performance requirements, safety and classification

IN 1783:1997/A1:2002 Matches – Performance requirements, safety and classification

IN 1784:2003 Foodstuffs – Detection of irradiated food containing fat – Gas chromatographic analysis of hydrocarbons

IN 1785:2003 Foodstuffs – Detection of irradiated food containing fat – Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones

IN 1786:1996 Foodstuffs – Detection of irradiated food containing bone – Method by ESR spectroscopy

IN 1787:2000 Foodstuffs – Detection of irradiated food containing cellulose by ESR spectroscopy

IN 1788:2001 Foodstuffs – Thermoluminescence detection of irradiated food from which silicate minerals can be isolated

IN 1789:2007+A1:2010 Medical vehicles and their equipment – Road ambulances

IN 179:2008 건축 자재 - 레버 손잡이 또는 누름 패드가 운영하는 비상구 장치, 요구 사항 및 시험 방법 - 탈출 경로에 사용

IN 1790:2013 Road marking materials – Preformed road markings

IN 1791:1997 Surface active agents – Fatty alkyl dimethyl amine oxides – Determination of the amine oxide content

IN 1792:2003 Welding – Multilingual list of terms for welding and related processes

IN 1793-1:2012 Road traffic noise reducing devices – Test method for determining the acoustic performance – Part 1: 흡음의 고유 특성

IN 1793-2:2012 Road traffic noise reducing devices – Test method for determining the acoustic performance – Part 2: 확산 음장 조건 하에서 공기 차음의 본질적인 특성

IN 1793-3:1997 Road traffic noise reducing devices – Test method for determining the acoustic performance – Part 3: 정규화 교통 소음 스펙트럼

IN 1793-6:2012 Road traffic noise reducing devices – Test method for determining the acoustic performance – Part 6: Intrinsic characteristics – In situ values of airborne sound insulation under direct sound field conditions

IN 1794-1:2011 Road traffic noise reducing devices – Non-acoustic performance – Part 1: Mechanical performance and stability requirements

IN 1794-2:2011 Road traffic noise reducing devices – Non-acoustic performance – Part 2: 일반 안전 및 환경 요구 사항

IN 1796:2013 Plastics piping systems for water supply with or without pressure – Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)

IN 1797:2001 Cryogenic vessels – Gas/material compatibility

IN 1799:1998 Products and systems for the protection and repair of concrete structures – Test methods – Tests to measure the suitability of structural bonding agents for application to concrete surface

IN 1802:2002 Transportable gas cylinders – Periodic inspection and testing of seamless aluminium alloy gas cylinders

IN 1803:2002 Transportable gas cylinders – Periodic inspection and testing of welded carbon steel gas cylinders

IN 1804-1:2001+A1:2010 지하 광산 용 기계 - 유압 구동 지붕에 대한 안전 요구 사항을 지원 - 부품을 1: 지원 단위와 일반 요구 사항

IN 1804-2:2001+A1:2010 지하 광산 용 기계 - 유압 구동 지붕에 대한 안전 요구 사항을 지원 - 부품을 2: 전원 집합 다리와 램

IN 1804-3:2006+A1:2010 지하 광산 용 기계 - 유압 구동 지붕에 대한 안전 요구 사항을 지원 - 부품을 3: 유압 제어 시스템

IN 1806:2006 굴뚝 - 단일 벽 굴뚝 클레이 / 세라믹 연도 블록 - 요구 사항 및 시험 방법

IN 1807-1:2013 Safety of woodworking machines – Band sawing machines – Part 1: Table band saws and band re-saws

IN 1807-2:2013 Safety of woodworking machines – Band sawing machines – Part 2: Log sawing machines

IN 1808:1999+A1:2010 중단 액세스 장비에 대한 안전 요구 사항 - 설계 계산, 안정성 기준, 건설 - 테스트

IN 1809:1997 Diving accessories – Buoyancy compensators – Functional and safety requirements, 시험 방법

IN 1811:2011 의도 된 인체 및 기사의 관통 부분에 삽입되는 모든 포스트 어셈블리에서 니켈의 릴리스에 대한 기준 시험 방법은 피부에 직접적이고 장기간 접촉하기

IN 1811:2011/AC:2012 의도 된 인체 및 기사의 관통 부분에 삽입되는 모든 포스트 어셈블리에서 니켈의 릴리스에 대한 기준 시험 방법은 피부에 직접적이고 장기간 접촉하기

IN 1814:2005 섬유 바닥 덮개 - 절단면에 손상 변성 Vettermann 드럼 테스트에 사용하는 저항의 측정

IN 1815:1997 탄력 섬유 바닥 깔개 - 정적 전기 성향의 평가

IN 1816:2010 탄력 바닥 코팅 - 거품지지와 동종 및 이종 부드러운 고무 바닥재에 대한 규정

IN 1817:2010 탄력 바닥 코팅 - 동종 및 이종 부드러운 고무 바닥재에 대한 규정

IN 1818:1998 탄력 바닥 코팅 -로드 무거운 의무 캐스터의 효과 측정

IN 1820:2005+A1:2009 마취 저수지 가방 (ISO 5362:2000, 수정)

IN 1821-1:1996 Electrically propelled road vehicles – Measurement of road operating ability – Part 1: Pure electric vehicles

IN 1821-2:1999 Electrically propelled road vehicles – Measurement of road operating ability – Part 2: Thermal electric hybrid vehicles

IN 1822-1:2009 High efficiency air filters (EPA, HEPA and ULPA) - 부품 1: 분류, performance testing, 마킹

IN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) - 부품 2: Aerosol production, measuring equipment, particle counting statistics

IN 1822-3:2009 High efficiency air filters (EPA, HEPA and ULPA) - 부품 3: Testing flat sheet filter media

IN 1822-4:2009 High efficiency air filters (EPA, HEPA and ULPA) - 부품 4: Determining leakage of filter elements (scan method)

IN 1822-5:2009 High efficiency air filters (EPA, HEPA and ULPA) - 부품 5: Determining the efficiency of filter elements

IN 1824:2011 Road marking materials – Road trials

IN 1825-1:2004 그리스 분리기 - 부품 1: 디자인의 원리, 성능 테스트, 마킹 및 품질 관리

IN 1825-1:2004/AC:2006 그리스 분리기 - 부품 1: 디자인의 원리, 성능 테스트, 마킹 및 품질 관리

IN 1825-2:2002 그리스 분리기 - 부품 2: Selection of nominal size, installation, operation and maintenance

IN 1826:1996 Biotechnology – Large-scale process and production – Control procedures for raw materials

IN 1827:1999+A1:2009 Respiratory protective devices – Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only – Requirements, 테스트, 마킹

IN 1829-1:2010 고압 워터 제트 기계 - 안전 요구 사항 - 부품 1: 기계

IN 1829-2:2008 고압 물 분사 기계 - 안전 요구 사항 - 부품 2: 호스, 호스 및 커넥터 라인

IN 1829-2:2008/AC:2011 고압 물 분사 기계 - 안전 요구 사항 - 부품 2: 호스, 호스 및 커넥터 라인

IN 1834-1:2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 1: Group II engines for use in flammable gas and vapour atmospheres

IN 1834-2:2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust

IN 1834-3:2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 3: Group II engines for use in flammable dust atmospheres

IN 1837:1999+A1:2009 기계류의 안전성 - 기계의 완전한 조명

IN 1838:2013 Lighting applications – Emergency lighting

IN 1839:2012 Determination of explosion limits of gases and vapours

IN 1841:1998 Adhesives – Test methods for adhesives for floor coverings and wall coverings – Determination of dimensional changes of a linoleum floor covering in contact with an adhesive

IN 1842:1997 Plastics – Thermoset moulding compounds (SMC – BMC) – Determination of compression moulding shrinkage

IN 1844:2013 Flexible sheets for waterproofing – Determination of resistance to ozone – Plastic and rubber sheets for roof waterproofing

IN 1845:2007 신발 제조 기계 - 신발 성형 기계 - 안전 요구 사항

IN 1846-1:2011 소방 및 구조 서비스 자동차 - 부품 1: Nomenclature and designation

IN 1846-2:2009+A1:2013 소방 및 구조 서비스 자동차 - 부품 2: 일반 요구 사항 - 안전 및 성능

IN 1846-3:2013 소방 및 구조 서비스 자동차 - 부품 3: 영구적으로 설치된 장비 - 안전 및 성능

IN 1847:2009 Flexible sheets for waterproofing – Plastics and rubber sheets for roof waterproofing – Methods for exposure to liquid chemicals, including water

IN 1848-1:1999 Flexible sheets for waterproofing – Determination of length, width and straightness – Part 1: Bitumen sheets for roof waterproofing

IN 1848-2:2001 Flexible sheets for waterproofing – Determination of length, width, straightness and flatness – Part 2: Plastic and rubber sheets for roof waterproofing

IN 1849-1:1999 Flexible sheets for waterproofing – Determination of thickness and mass per unit area – Part 1: Bitumen sheets for roof waterproofing

IN 1849-2:2009 Flexible sheets for waterproofing – Determination of thickness and mass per unit area – Part 2: Plastic and rubber sheets

IN 1850-1:1999 Flexible sheets for waterproofing – Determination of visible defects – Part 1: Bitumen sheets for roof waterproofing

IN 1850-2:2001 Flexible sheets for waterproofing – Determination of visible defects – Part 2: Plastic and rubber sheets for roof waterproofing

IN 1852-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene (PP) - 부품 1: 파이프 사양, 피팅 및 시스템

IN 1853:1999+A1:2009 농업 기계 - 팁 몸 트레일러 - 안전

IN 1854:2010 Pressure sensing devices for gas burners and gas burning appliances

IN 1856-1:2009 굴뚝 - 금속 굴뚝에 대한 요구 사항 - 부품 1: 시스템 굴뚝 제품

IN 1856-2:2009 굴뚝 - 금속 굴뚝에 대한 요구 사항 - 부품 2: 금속 연도 라이너와 연결 배기 파이프

IN 1857:2010 굴뚝 - 구성 요소 - 콘크리트 굴뚝 라이너

IN 1858:2008+A1:2011 굴뚝 - 구성 요소 - 콘크리트 연도 블록

IN 1859:2009+A1:2013 Chimneys – Metal chimneys – Test methods

IN 1860-1:2013 Appliances, solid fuels and firelighters for barbecueing – Part 1: Barbecues burning solid fuels – Requirements and test methods

IN 1860-2:2005 Appliances, solid fuels and firelighters for barbecueing – Part 2: Barbecue charcoal and barbecue charcoal briquettes – Requirements and test methods

IN 1860-3:2003 Appliances, solid fuels and firelighters for barbecuing – Part 3 : Firelighters for igniting solid fuels for use in barbecue appliances – Requirements and test methods

IN 1860-3:2003/A1:2006 Appliances, solid fuels and firelighters for barbecuing – Firelighters for igniting solid fuels for use in barbecue – Requirements and test methods

IN 1860-4:2004 Appliances, solid fuels and firelighters for barbecueing – Part 4: Single use barbecues burning solid fuels – Requirements and test methods

IN 1861:1998 Refrigerating systems and heat pumps – System flow diagrams and piping and instrument diagrams – Layout and symbols

IN 1863-1:2011 유리는 건물 - 열은 소다 석회 규산염 유리 강화 - 파트 1: 정의 및 설명

IN 1863-2:2004 유리는 건물 - 열은 소다 석회 규산염 유리 강화 - 파트 2: 적합성 / 제품 표준의 평가

IN 1864:2008 Inland navigation vessels – Wheelhouse – Ergonomic and safety requirements

IN 1865-1:2010 Patient handling equipment used in road ambulances – Part 1: General stretcher systems and patient handling equipment

IN 1865-2:2010 Patient handling equipment used in road ambulances – Part 2: Power assisted stretcher

IN 1865-3:2012 Patient handling equipment used in road ambulances – Part 3: Heavy duty stretcher

IN 1865-4:2012 Patient handling equipment used in road ambulances – Part 4: Foldable patient transfer chair

IN 1865-5:2012 Patient handling equipment used in road ambulances – Part 5: 들것 지원

IN 1866:2005 Mobile fire extinguishers

IN 1866-1:2007 모바일 소화기 - 부 1: Characteristics, performance and test methods

IN 1866-3:2013 모바일 소화기 - 부 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1

IN 1867:1997 Machine-readable cards – Health care applications – Numbering system and registration procedure for issuer identifiers

IN 1868:1997 Personal protective equipment against falls from a height – List of equivalent terms

IN 1869:1997 Fire blankets

IN 1870-10:2013 목공 기계의 안전 - 원형 절단 기계 - 부품 10: 단일 블레이드 자동 및 반자동까지 절단 크로스 컷 자르는 기계를

IN 1870-11:2013 목공 기계의 안전 - 원형 절단 기계 - 부품 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (레이디 얼 톱)

IN 1870-12:2013 목공 기계의 안전 - 원형 절단 기계 - 부품 12: 진자 크로스 컷 자르는 기계

IN 1870-13:2007+A2:2012 목공 기계의 안전 - 원형 절단 기계 - 부품 13: 수평 빔 패널 절단 기계

IN 1870-14:2007+A2:2012 목공 기계의 안전 - 원형 절단 기계 - 부품 14: 수직 패널 절단 기계

IN 1870-15:2012 목공 기계의 안전 - 원형 절단 기계 - 부품 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading

IN 1870-16:2012 목공 기계의 안전 - 원형 절단 기계 - 부품 16: Double mitre sawing machines for V cutting

IN 1870-17:2012 목공 기계의 안전 - 원형 절단 기계 - 부품 17: 하나 톱 장치와 수동 수평 절단 크로스 컷 자르는 기계 (레이디 얼 톱)

IN 1870-18:2013 목공 기계의 안전 - 원형 절단 기계 - 부품 18: Dimension saws

IN 1870-3:2001+A1:2009 목공 기계의 안전 - 원형 절단 기계 - 부품 3: 다운 크로스 컷 톱과 이중 목적을 절단 크로스 컷 톱 / 원형 톱 벤치 절단 다운

IN 1870-4:2012 목공 기계의 안전 - 원형 절단 기계 - 부품 4: Multiblade 수동로드 및 / 또는 하역 기계 톱질 RIP

IN 1870-5:2002+A2:2012 목공 기계의 안전 - 원형 절단 기계 - 부품 5: 원형 sawbenches / 최대 절단 크로스 컷 자르는 기계를

IN 1870-6:2002+A1:2009 목공 기계의 안전 - 원형 절단 기계 - 부품 6: 장작 / 원형 톱 벤치 장작 및 이중 목적 원형 절단 기계 용 원형 절단 기계, 수동로드 및 / 또는 하역

IN 1870-7:2012 목공 기계의 안전 - 원형 절단 기계 - 부품 7: 통합 공급 테이블 및 수동로드 및 / 또는 하역 단일 블레이드 로그 자르는 기계

IN 1870-8:2012 목공 기계의 안전 - 원형 절단 기계 - 부품 8: 전원 구동 톱 장치와 수동로드 및 / 또는 하역 단일 블레이드 테두리 원형 격랑 자르는 기계

IN 1870-9:2012 목공 기계의 안전 - 원형 절단 기계 - 부품 9: 통합 피드 및 수동로드 및 / 또는 하역과 교차 절단 더블 블레이드 원형 절단 기계

IN 1871:2000 Road marking materials – Physical properties

IN 1873:2005 루핑 조립식 부속품 - 플라스틱의 개별 지붕 조명 - 제품 사양 및 시험 방법

IN 1875-3:1997 Rubber- or plastics- coated fabrics – Determination of tear strength – Part 3: Trapezoidal method

IN 1876-1:1997 Rubber- or plastics-coated fabrics – Low-temperature tests – Part 1: Bending test

IN 1876-2:1997 Rubber- or plastics- coated fabrics – Low temperature tests – Part 2: Impact test on loop

IN 1877-1:2000 Products and systems for the protection and repair of concrete structures – Test methods – Reactive functions related to epoxy resins – Part 1: Determination of epoxy equivalent

IN 1877-2:2000 Products and systems for the protection and repair of concrete structures – Test methods – Reactive functions related to epoxy resins – Part 2: Determination of amine functions using the total basicity number

IN 1881:2006 Products and systems for the protection and repair of concrete structures – Test methods – Testing of anchoring products by the pull-out method

IN 1882:1998 Feather and down – Test methods – Determination of the commercial mass of a lot of feather and down

IN 1883:1998 Feather and down – Sampling in view of tests

IN 1884:1998 Feather and down – Test methods – Determination of microbiological state

IN 1885:1998 Feather and down – Terms and definitions

IN 1885:1998/A1:2003 Feather and down – Terms and definitions

IN 1886:2007 Ventilation for buildings – Air handling units – Mechanical performance

IN 1888:2012 Child care articles – Wheeled child conveyances – Safety requirements and test methods

IN 1889-1:2011 모바일 기계 지하 작업 - - 안전 - 지하 광산 용 기계 부품 1: 고무 tyred 차량

IN 1889-2:2003+A1:2009 모바일 기계 지하 작업 - - 안전 - 지하 광산 용 기계 부품 2: 철도 기관차

IN 1890:2006 Surface active agents – Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide

IN 1891:1998 Personal protective equipment for the prevention of falls from a height – Low stretch kernmantel ropes

IN 1892:2005 Advanced technical ceramics – Mechanical properties of ceramic composites at high temperature under inert atmosphere – Determination of tensile properties

IN 1893:2005 Advanced technical ceramics – Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure – Determination of tensile properties

IN 1894:2005 Advanced technical ceramics – Mechanical properties of ceramic composites at high temperature under inert atmosphere – Determination of shear strength by compression loading of notched specimens

IN 1895:2001 Adhesives for paper and board, packaging and disposable sanitary products – 180° – “T” peel test for a flexible-to-flexible assembly

IN 1895:2001/AC:2007 Adhesives for paper and board, packaging and disposable sanitary products – 180°-”T” peel test for a flexible-to-flexible assembly

IN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products – Determination of tensile strength and elongation

IN 1899-1:1998 Water quality – Determination of biochemical oxygen demand after n days (BODn) - 부품 1: Dilution and seeding method with allylthiourea addition (ISO 5815:1989, 수정)

IN 1899-2:1998 Water quality – Determination of biochemical oxygen demand after n days (BODn) - 부품 2: Method for undiluted samples (ISO 5815:1989, 수정)

IN 19:2002 Industrial valves – Marking of metallic valves

IN 1906:2012 Building hardware – Lever handles and knob furniture – Requirements and test methods

IN 1912:2012 Structural Timber – Strength classes – Assignment of visual grades and species

IN 1912:2012/AC:2013 Structural Timber – Strength classes – Assignment of visual grades and species

IN 1914:2009 Inland navigation vessels – Work boats, ship’s boats and lifeboats

IN 1919:2000 Transportable gas cylinders – Cylinders for liquefied gases (excluding acetylene and LPG) - 충전 시간 검사

IN 1920:2000 Transportable gas cylinders – Cylinders for compressed gases (아세틸렌 제외) - 충전 시간 검사

IN 1929-7:2005 Basket trolleys – Part 7: Requirements and tests for basket trolleys with baby and child carrying facilities

IN 1932:2013 External blinds and shutters – Resistance to wind loads – Method of testing and performance criteria

IN 1933:1998 Exterior blinds – Resistance to load due to water accumulation – Test method

IN 1934:1998 Thermal performance of buildings – Determination of thermal resistance by hot box method using heat flow meter – Masonry

IN 1935:2002 건축 자재 - 단일 축 경첩 - 요구 사항 및 시험 방법

IN 1935:2002/AC:2003 건축 자재 - 단일 축 경첩 - 요구 사항 및 시험 방법

IN 1938:2010 Personal eye protection – Goggles for motorcycle and moped users

IN 1946-1:1999 Thermal performance of building products and components – Specific criteria for the assessment of laboratories measuring heat transfer properties – Part 1: Common criteria

IN 1946-2:1999 Thermal performance of building products and components – Specific criteria for the assessment of laboratories measuring heat transfer properties – Part 2: Measurements by guarded hot plate method

IN 1946-3:1999 Thermal performance of building products and components – Specific criteria for the assessment of laboratories measuring heat transfer properties – Part 3: Measurements by heat flow meter method

IN 1946-4:2000 Thermal performance of building products and components – Specific criteria for the assessment of laboratories measuring heat transfer properties – Part 4: Measurements by hot box methods

IN 1946-5:2000 Thermal performance of building products and components – Specific criteria for the assessment of laboratories measuring heat transfer properties – Part 5: Measurements by pipe test methods

IN 196-1:2005 Methods of testing cement – Part 1: Determination of strength

IN 196-10:2006 Methods of testing cement – Part 10: Determination of the water-soluble chromium (VI) content of cement

IN 196-2:2013 Method of testing cement – Part 2: Chemical analysis of cement

IN 196-3:2005+A1:2008 Methods of testing cement – Part 3: Determination of setting times and soundness

IN 1964-3:2000 Transportable gas cylinders – Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres – Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPA는

IN 196-5:2011 Methods of testing cement – Part 5: Pozzolanicity test for pozzolanic cement

IN 196-6:2010 Methods of testing cement – Part 6: Determination of fineness

IN 196-7:2007 Methods of testing cement – Part 7: Methods of taking and preparing samples of cement

IN 1968:2002 Transportable gas cylinders – Periodic inspection and testing of seamless steel gas cylinders

IN 1968:2002/A1:2005 Transportable gas cylinders – Periodic inspection and testing of seamless steel gas cylinders

IN 196-8:2010 Methods of testing cement – Part 8: Heat of hydration – Solution method

IN 196-9:2010 Methods of testing cement – Part 9: Heat of hydration – Semi-adiabatic method

IN 197-1:2011 시멘트 - 부품 1: 구성, 일반적인 시멘트의 사양 및 적합성 기준

IN 197-2:2000 시멘트 - 부품 2: 적합성 평가

IN 1983:2013 Industrial valves – Steel ball valves

IN 1984:2010 Industrial valves – Steel gate valves

IN 1991-1-7:2006 Eurocode 1 – Actions on structures – Part 1-7: General actions – Accidental actions

IN 1991-1-7:2006/AC:2010 Eurocode 1 – Actions on structures – Part 1-7: General actions – Accidental actions

IN 1993-1-12:2007 Eurocode 3 – Design of steel structures – Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700

IN 1993-1-12:2007/AC:2009 Eurocode 3 – Design of steel structures – Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700

IN 1993-1-7:2007 Eurocode 3 – Design of steel structures – Part 1-7: Plated structures subject to out of plane loading

IN 1993-1-7:2007/AC:2009 Eurocode 3 – Design of steel structures – Part 1-7: Plated structures subject to out of plane loading

IN 1993-1-8:2005 Eurocode 3: Design of steel structures – Part 1-8: Design of joints

IN 1993-1-8:2005/AC:2009 Eurocode 3: Design of steel structures – Part 1-8: Design of joints

IN 1993-1-9:2005 Eurocode 3: Design of steel structures – Part 1-9: Fatigue

IN 1993-1-9:2005/AC:2009 Eurocode 3: Design of steel structures – Part 1-9: Fatigue

IN 1994-2:2005 Eurocode 4 – Design of composite steen and concrete structures – Part 2: General rules and rules for bridges

| 1 || 2 || 3 |

ASTM E283 – 04 (2012) 공기누설 시험2014년 1월 10일 - 2:28 오후
[공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  
MIL-Spec Documents2013년 12월 11일 - 6:40 오후
MIL-사양, MIL-STD 자료 상담 MIL-Spec Download,ko(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.
MIL-STD-810G 시험항목2017년 8월 18일 - 12:43 오후
아래는 MIL-STD-810G Part Two,,ko,높은 온도 MIL-STD-810G 방법,,en,저온 MIL-STD-810G 방법,,en,온도 충격 MIL-STD-810G 방법,,en,유체 MIL-STD-810G 방법에 의한 오염,,en,MIL-STD-810G 방법을 비,,en,습도 MIL-STD-810G 방법,,en,곰팡이 MIL-STD-810G 방법,,en (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]
IP Code2016년 4월 12일 - 6:42 오후
IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]
ASTM E119 Fire Testing2016년 3월 25일 - 8:01 오후
ASTM E 119 – 건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84, NFPA 285, UL 790, BS 476-6/7, NF P92-507, FROM 4102, IN 13501, GB 8624, BS 476-20，IN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

© 저작권 - [AP Network 인증원-해외 제품 시험인증 상담,,ko,자동차 OEM 규격시험,,ko | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | FROM | IN, GOST-R | 테스트 & 증명서 | - 웹 페이지는 Performancenetwork Inc.에 의해 구축.

RSS