2. CEMENT AND CONCRETE
2. CEMENT AND CONCRETE
2-1) ASTM C172 – 08 ; Standard Practice for Sampling Freshly Mixed Concrete
2-2) ASTM C192 / C192M – 07 ; Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
2-3) ASTM C31 / C31M – 09 ; Standard Practice for Making and Curing Concrete Test Specimens in the Field
2-4) ASTM C317 / C317M – 00(2005) ; Standard Specification for Gypsum Concrete
2-5) ASTM C39 / C39M – 09a ; Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
2-6) ASTM C42 / C42M – 04 ; Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
2-7) ASTM C496 / C496M – 04e1 ; Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
2-8) ASTM C617 – 09a ; Standard Practice for Capping Cylindrical Concrete Specimens
2-9) ASTM C685 / C685M – 10 ; Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
2-10) ASTM C78 – 09 ; Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
2-11) ASTM C94 / C94M – 09a ; Standard Specification for Ready-Mixed Concrete
2-12) ASTM C989 – 09a ; Standard Specification for Slag Cement for Use in Concrete and Mortars
2-13) BDS 240:1963 ; Specification for Plain Cold Drawn Steel Wire for Prestressed Concrete;
2-14) BDS 243:1963 ; Specification for Coarse and Fine Aggregates from Natural Sources for Concrete;
2-15) BDS 279:1963 ; Specification for Abrasion of Coarse Aggregates by Use of Los Angeles Machine (under revision);
2-16) BDS 281:1963 ; Specification for Organic Impurities in Sands for Concrete (under revision);
2-17) BDS 921:1980 ; Specification for Standard Sand for Testing of Cement;
2-18) BDS EN 934-1:2008 ; 콘크리트 용 혼화제, mortar and grout — Part 1: 일반 요구 사항
2-19) BDS EN 934-2:2008 ; 콘크리트 용 혼화제, mortar and grout — Part 2: Concrete admixtures — Definitions, 요구 사항, 적합성, marking and
2-20) BDS ISO 1920-10: 2011 ; Testing of Concrete — Part 10: Determination of static modulus of elasticity in compression
2-21) BDS ISO 1920-8: 2010 ; Testing of Concrete — Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory
2-22) BDS ISO 1920-9: 2010 ; Testing of Concrete — Part 9: Determination of creep of concrete cylinders in compression
2-23) BDS ISO 22965-1: 2008 ; Concrete — Part 1: Methods of specifying and guidance for the specifier
2-24) BDS ISO 22965-2: 2008 ; Concrete — Part 2: Specification of constituent materials, production of concrete and compliance of concrete
Comments are closed.