IN 14041: RESILIENT, TEXTILE AND LAMINATE FLOOR COVERING

- ESSENTIAL CHARACTERISTICS

To guarantee the free trade of construction products, the European Commission has issued the “Construction products Regulation” (305/2011/EEC) on March 9th, 2011.

건축 작품의 영구적 인 방법에 통합하기위한 생산 자료, 건물 및 토목 모두 포함, 경제 관련 평생 동안 기본적인 규정을 준수해야합니다, 제공 정기적 인 유지 보수를 수행한다.

These FUNDAMENTAL REGULATIONS include:

-mechanical strength and stability˜˜
-fire safety˜˜
-hygiene, health and environment˜˜
-safety of use˜˜
-sound nuisance˜˜
-energy savings and heat retention

The Regulation only indicates the essential requirements. 어떻게 이러한 필수 요구 사항을 충족해야하는 것은 화재 안전 가연성의 경우 이러한 € â 같은 특정 매개 변수 "로 그들을 번역 전문가에 남아, 화염 전파, 연기 전파. 이들 파라미터를 측정 할 수있을 것이다, 시험 방법 및 분류를 모두 의미. A material complying with the mandatory classifications will thus automatically comply with the essential requirements of the Regulation.
The European standardisation committee CEN/TC134 has developed the harmonised standard EN14041 for carpets, laminate and resilient floor coverings such as vinyl, rubber and linoleum. The EN14041 was published in August 2004, harmonised by publication by the EU on June 8th 2005.

CE marking on floor coverings according to the new regulation is mandatory since July 1st, 2013. Because rugs, runners, etc. are not considered as building materials, CE marking does not apply to them.
The HARMONISED STANDARD describes:

-SLIP RESISTANCE* according to EN 13893, class DS (friction coeff. ≥ 0.30) or NPD (No Performance Determined), carpet is to be classified as DS without testing˜˜
-REACTION TO FIRE* according to EN 13501-1, classes Afl-Ffl˜˜
-CONTENT OF PENTACHLOROPHENOL* (PCP) according EN 12673 (product may not contain PCP)Â Â ~ ~
-FORMALDEHYDE EMISSION* according to EN 717-2, class E1 of E2˜˜
-WATER-TIGHTNESS according EN 13553: not applicable to textile floor coverings˜˜
-ELECTRICAL BEHAVIOUR according to EN 1815: antistatic floor coverings (≤ 2 kV의)Â Â ~ ~
-THERMAL CONDUCTIVITY according to ISO 8302 (≤ 0,17 m2.K/W)Â Â ~ ~
-ELECTRICAL RESISTANCE according to ISO 10965: static dissipative floor coverings (vertical resistance ≤ 109 Ohm)Â Â ~ ~
-ELECTRICAL RESISTANCE according to ISO 10965: conductive floor coverings (vertical resistance ≤ 106 Ohm)
*필수 요구 사항
The three competent European federations (ECRA = European Carpet and Rug Association: ERFMI =European Resilient Flooring Manufactures Institute and EPLF = European Producers of Laminate Flooring) have arrived at the following agreements:

-the CE mark has to be affixed upon the packaging and not on the individual product˜˜
-pictograms will only be used in Declaration of Performance (DOP) document under topic 8

The conformity of a floor covering with the requirements of EN 14041 생산자 자신에 의해 부분적으로 증명해야합니다, 하지만 특정 특성에, the producer will have to apply to a NOTIFIED TESTING LABORATORY or to a NOTIFIED PRODUCT CERTIFICATION BODY.

제품의 적합성은 다른 시스템에 따라 분석하고 조절한다. 이 시스템은 제조 업체의 주장과 제품의 적합성을 실증하기 위해 필요한 규정 및 테스트의 복잡성에 따라 달라질 수 있습니다.

ATTESTATION LEVEL OF CONFORMITY TYPE SYSTEM 1

This system is mandatory for fire classes Bfl and Cfl for those products that have obtained these fire classes by adding fire retardant additives during the production process.
Tasks under the responsibility of the MANUFACTURER OR DISTRIBUTOR :

-maintain factory production control (FPC)
˜˜-draw up declaration of performance (DOP)
˜˜-submit an application for initial type testing to a notified test lab of all essential requirements:

•reaction to fire
•slip resistance (경우 관련)
•formaldehyde emission (경우 관련)
•content of pentachlorophenol (경우 관련)

˜˜-submit an application for initial control of the factory and factory production control (FPC) by a notified product certification body
˜˜-affix CE-marking upon packaging and on commercial documentation

ON PACKAGING AND COMMERCIAL DOCUMENTATIONCE MARKING OF CONFORMITY TYPE SYSTEM 1

EN14041
0493-CPR-XXXX (성능 선언의 수)
Textile, resilient or laminate floorcovering
이름과 제조 / 유통 업체의 주소 또는 포장에 다른 곳에서 언급되지 않은 경우 표시를 식별
Tasks under the responsibility of the NOTIFIED TESTING LABORATORY and NOTIFIED PRODUCT CERTIFICATION BODY˜˜
sampling and initial type testing˜˜
initial inspection of factory and factory production control (FPC)Â Â ~ ~
draw up number certificate of conformity˜˜
continuous surveillance and approval of FPC

This system is mandatory for all fire classes Bfl and Cfl for those products that have obtained these fire classes without adding fire retardant additives during the production process, as well as for fire classes Dfl and Efl (except for products Classified Without Further Testing (CWFT)) .ATTESTATION LEVEL OF CONFORMITY TYPE SYSTEM 3

-Tasks under the responsibility of the MANUFACTURER :Â Â ~ ~
-maintain factory production control (FPC)Â Â ~ ~
-draw up declaration of performance (DOP)Â Â ~ ~
-모든 필수 요구 사항의 통지 테스트 랩에 초기 유형 테스트를위한 신청서를 제출 :

화재에 â € ¢ 반응
•slip resistance (경우 관련)
•formaldehyde emission (경우 관련)
•content of pentachlorophenol (경우 관련)

˜˜-affix CE-marking upon packaging and on commercial documentation

CE MARKING OF CONFORMITY TYPE SYSTEM 3

ON PACKAGING AND COMMERCIAL DOCUMENTATION

EN14041
DoP-CPR-XXXX (성능 선언의 수)
Textile, resilient or laminate floorcovering
이름과 제조 / 유통 업체의 주소 또는 포장에 다른 곳에서 언급되지 않은 경우 표시를 식별
Tasks under the responsibility of the NOTIFIED TESTING LABORATORIES
˜˜initial type testing