Archive for year: 2014

15. TIMBER & WOOD PRODUCTS

29 Nov 2014 댓글
떨어져서

건설자재 시험 및 인증 관련 규격목록 15

15. TIMBER & WOOD PRODUCTS

15-1) BDS 1087:1984 ; Specification for Method of Sampling of Plywood :

15-2) BDS 1090 : 1984 ; Methods of Test of Plywood.

15-3) BDS 1090:1984 ; Methods of Test for Plywood;

15-4) BDS 1158:1986 ; Specification for Veneered Decorative Plywood;

15-5) BDS 1256:1990 ; Classification of Commercial Timber;

15-6) BDS 1311:1990 ; Key for Identification of Commercial Timber.

15-7) BDS 142: 1961 ; Specification for Wood Doors (under revision);

15-8) BDS 173: 1962 ; Specification for Wood Windows (under revision);

15-9) BDS 230: 1962 ; Glossary of Terms Applicable to Timber, Plywood and Joinery (under revision);

15-10) BDS 619:1967 ; Specification for Particle Board (medium density) (under revision);

15-11) BDS 620:1967 ; Specification for Hardboard (under revision);

15-12) BDS 799:1983 ; Specification for Plywood for General Purposes (First Revision);

15-13) BDS 803:1973 ; Trade Names and Abbreviated Symbols for Timber Species;

15-14) BDS 819:1975 ; Code of Practice for Preservation of Timber;

15-15) BDS 820:1978 ; Recommendation for Maximum Permissible Moisture Content of Timber used for Different Purposes in Bangladesh;

15-16) BDS 857:1977 ; Specification for Grading Rules for Logs and Sawn Timbers;

15-17) BDS EN 316:2008 ; Wood Fiberboards — Definition, Classification and Symbols

15-18) IS 3513:1966 ; Specification for resin treated compressed wood laminates (compregs):

15-19) IS 3513:1989 ; Specification for resin treated compressed wood laminates (compregs):

15-20) IS 4835-1979 ; Specification for Polyvinyl Acetate Dispersion-based Adhesives for Wood (First Revision);

15-21) IS 4990-1993 ; Specification for plywood for concrete shattering work (second revision);

15-22) IS 5509-2000 ; Specification for fire retardant plywood (second revision);

15-23) IS 5539-1969 ; Specification for Preservative Treated Plywood.

15-24) IS 848-1974 ; Specification for Synthetic Resign Adhesives for Plywood (Phenolic and aminoplastic) (First Revision);

15-25) IS 849-1994 ; Specification for cold setting case in glue for wood (first revision)

15-26) IS 851-1978 ; Specification for Synthetic Resin Adhesives for Construction Work (non structural) in Wood (First Revision);

15-27) IS 852-1994 ; Specification for animal glue for general wood-working purposes (second revision);

15-28) IS 9188-1979 ; Specification for Adhesive for Structural Laminated Wood Products for Use Under Exterior Exposure Condition.

15-29) IS 9307-1979 (Parts I to VIII) ; Methods of Tests for Wood-based Structural Sandwich Construction.

15-30) ISO 2695:1976 ; Fibre Building Boards–Hard and Medium Boards for General

15-31) ISO 2696:1976 ; Fibre Building Boards-Hard and Medium Boards-Quality

15-32) ISO 3340:1976 ; Fibre Building Boards-Determination of Sand Content;

15-33) ISO 3346:1976 ; Fibre Building Boards-Determination of Surface Finish (roughness);

15-34) ISO 3729:1976 ; Fibre Building Boards-Determination of Surface Stability;

15-35) ISO 766: 1972 ; Fibre Building Boards–Determination of Dimensions of Test Pieces;

15-36) ISO 767:1975 ; Fibre Building Boards–Determination of Moisture Content;

15-37) ISO 768:1972 ; Fibre Building Boards–Determination of Bending Strength;

15-38) ISO 769:1972 ; Fibre Building Boards–Hard and Medium Boards–Determination of

15-39) ISO 818:1975 ; Fibre Building Boards–Definition-Classification;

15-40) ISO 819:1975 ; Fibre Building Boards Determination of Density;

15-41) ISO 820:1975 ; Particle Boards–Definition and Classification

15-42) ISO 821-1975 ; Particle Boards–Determination of Dimensions of Test Pieces;

15-43) ISO 822:1975 ; Particle Boards–Determination of Density;

15-44) ISO 823:1975 ; Particle Boards–Determination of Moisture Content;

15-45) ISO / TR 7469:1981 ; Dimensional Stability of Hardboards.

 

 

 

14. Welding Electrodes and Wires

29 Nov 2014 댓글
떨어져서

건설자재 시험 및 인증 관련 규격목록 14

14. Welding Electrodes and Wires

14-1) BDS 1442-1:1994 ; Filler rods and wire for gas shielded arc-welding-Ferric steel

14-2) BDS 1442-2:1994 ; Filler rods and wire for gas shielded arc-welding-Austenitic stainless steel

14-3) BDS 1442-3:1994 ; Filler rods and wires for gas shielded arc welding-copper and copper alloy

14-4) BDS 1442-4:1994 ; Filler rods and wires for gas shielded arc welding-Aluminium and Aluminium alloy and magnesium alloys

14-5) BDS 1442-5:1994 ; Filler rods and wires for gas shielded arc welding-Nickel and nickel alloys

14-6) BDS 239: 1963 ; Specification for Soft Solder (under revision);

14-7) IS 1278-1972 ; Specification for Filler Rods and Wires for Gas Welding (Second Revision);

14-8) IS 1395-1982 ; Specification for Low and Medium Alloy Steel Covered Electrodes for Manual Metal Arc Welding (Third Revision);

14-9) IS 3613-1974 ; Acceptance Tests for Wire Flux Combinations for Submerged-Arc Welding of Structural Steel (First Revision);

14-10) IS 4972-1968 ; Specification for Resistance Spot-Welding Electrodes;

14-11) IS 6419-1996 ; Specification for welding rods and bare electrodes for gas shielded arc welding of structural steel (first revision);

14-12) IS 6560-1996 ; Specification for molybdenum and chromium-molybdenum low alloy steel welding rods and bare electrodes for gas shielded arc welding (first revision);

14-13) IS 7280-1974 ; Specification for Base Wire Electrodes for Submerged-Arc Welding of Structural Steels;

14-14) IS 814 – 1991 ; Specification for covered electrodes for manual metal arc welding of carbon and carbon manganese steel (fifth revision)

14-15) IS 815-1974 ; Classification and Coding of Covered Electrodes for Metal Arc Welding of Structural Steels (Second Revision);

14-16) IS 8363-1976 ; Specification for Bare Wire Electrodes for Electroslag Welding of Streels;

14-17) ISO 9453:1990 ; Soft Solder Alloys-Chemical Compositions and Forms;

14-18) ISO 9454:1990 ; Soft Soldering Fluxes-Classification and Requirements

14-19) ISO 9455-1: 1990 ; Soft Soldering Fluxes- Test Methods

14-20) ISO 9455-11:1991 ; Soft Soldering Fluxes-Test Methods

14-21) ISO 9455-14:1991 ; Soft Soldering Fluxes-Test Methods

14-22) ISO 9455-8:1991 ; Soft Soldering Fluxes-Test Methods

 

13. Steel Fasteners

29 Nov 2014 댓글
떨어져서

건설자재 시험 및 인증 관련 규격목록 13

13. Steel Fasteners

13-1) ASTM A183 – 03(2009) ; 탄소 강철 트랙 볼트와 너트에 대한 표준 규격

13-2) ASTM A193 / A193M – 09 ; Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

13-3) ASTM A194 / A194M – 10 ; Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, 또는 두

13-4) ASTM A307 – 07B ; Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

13-5) ASTM A31 – 04(2009) ; 철강 리벳과 리벳 바의 표준 사양, 압력 용기

13-6) ASTM A320 / A320M – 08 ; Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service

13-7) ASTM A325 – 09ae1 ; Standard Specification for Structural Bolts, 강철, 열처리, 120/105 KSI 최소 인장 강도

13-8) ASTM A354 – 07a ; Standard Specification for Quenched and Tempered Alloy Steel Bolts, 스터드, 및 다른 외부 나사 조임

13-9) ASTM A437 / A437M – 10 ; Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

13-10) ASTM A449 – 07B ; Standard Specification for Hex Cap Screws, 볼트와 스터드, 강철, 열처리, 120/105/90 KSI 최소 인장 강도, 일반적인 사용

13-11) ASTM A489 – 04e1 ; Standard Specification for Carbon Steel Lifting Eyes

13-12) ASTM A490 – 09 ; Standard Specification for Structural Bolts, 합금강, 열처리, 150 KSI 최소 인장 강도

13-13) ASTM A502 – 03(2009) ; 리벳 표준 사양, 강철, 구조상의

13-14) ASTM A540 / A540M – 10 ; Standard Specification for Alloy-Steel Bolting for Special Applications

13-15) ASTM A563 – 07a ; Standard Specification for Carbons and Alloy Steel Nuts

13-16) ASTM A574 – 08 ; Standard Specification for Alloy Steel Socket-Head Cap Screws

13-17) ASTM C1002 – 07 ; Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

13-18) ASTM C514 – 04(2009)e1 ; Standard Specification for Nails for the Application of Gypsum Board

13-19) ASTM C954 – 07 ; Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs

13-20) ASTM C955 – 09a ; Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases

13-21) ASTM F436 – 09 ; Standard Specification for Hardened Steel Washers

13-22) ASTM F593 – 02(2008) ; Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

13-23) ASTM F594 – 09 ; Standard Specification for Stainless Steel Nuts

13-24) ASTM F844 – 07a ; Standard Specification for Washers, 강철, 평원 (Flat), Unhardened for General Use

13-25) ASTM F959 – 09 ; Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

13-26) BDS 1373 : 1992 ; Slotted countersunk flat head tapping screws

13-27) BDS 1374 : 1992 ; Slotted raised counter

13-28) BDS 1375 : 1992 ; Fasteners hexagon products widths across flats

13-29) BDS 1405:1993 ; Bolts, Screws, Nuts and Accessories Terminology and Nomenclature

13-30) BDS 1406:1993 ; Hexagon nuts style 2 products grades A and B.

13-31) BDS 1407:1993 ; Hexagon nuts style 3 products grades A and B.

13-32) BDS 1408:1993 ; General purpose screw threads general plan

13-33) BDS 1409:1993 ; General purpose screw threads selected sizes for screws, bolts and nuts

13-34) BDS 1410:1993 ; Thread run-outs for fasteners thread of BDS 1408: 1995 과

13-35) BDS 1411:1993 ; Tapping screws thread

13-36) BDS 1412:1993 ; Thread undercuts of external metric thread fasteners

13-37) BDS 1413:1993 ; Head configuration and gauging of countersunk head screws

13-38) BDS 1428 : 1993 ; Fasteners-bolts, screws, studs and nuts-symbols and designations of dimensions

12. Steel Bars, Wire and Wire Rods

29 Nov 2014 댓글
떨어져서

건설자재 시험 및 인증 관련 규격목록 12

12. Steel Bars, Wire and Wire Rods

12-1) ASTM A108 – 07 ; Standard Specification for Steel Bar, 탄소 및 합금, 냉간 가공

12-2) ASTM A108 – 07 ; Standard Specification for Steel Bar, 탄소 및 합금, 냉간 가공

12-3) ASTM A116 – 05 ; Standard Specification for Metallic-Coated, 스틸 짠 와이어 울타리 직물

12-4) ASTM A185 / A185M – 07 ; 철강 용접 와이어 보강을위한 표준 규격, 평원, 콘크리트에 대한

12-5) ASTM A227 / A227M – 06 ; 강철 와이어에 대한 표준 규격, Cold-Drawn for

12-6) ASTM A228 / A228M – 07 ; 강철 와이어에 대한 표준 규격, 음악 봄 품질

12-7) ASTM A229 / A229M – 99(2005) ; 강철 와이어에 대한 표준 규격, Oil-Tempered for Mechanical Springs

12-8) ASTM A276 – 08a ; Standard Specification for Stainless Steel Bars and Shapes

12-9) ASTM A29 / A29M – 05 ; 스틸 바의 표준 사양, 탄소 및 합금, 핫 단조, 에 대한 일반 요구 사항

12-10) ASTM A311 / A311M – 04 ; 냉간 압연을위한 표준 규격, 기계적 성질의 요구 사항에 따라 스트레스 안심 카본 스틸 바

12-11) ASTM A322 – 07 ; 스틸 바의 표준 사양, 합금, 표준 등급

12-12) ASTM A368 – 95a(2009) ; 스테인레스 스틸 와이어 물가에 대한 표준 규격

12-13) ASTM A434 – 06 ; 스틸 바의 표준 사양, 합금, 핫 단조 또는 냉간 처리, 조질

12-14) ASTM A475 – 03(2009)e1 ; Standard Specification for Zinc-Coated Steel Wire Strand

12-15) ASTM A478 – 97(2008) ; 크롬 니켈 스테인리스 제직 및 편직 와이어에 대한 표준 규격

12-16) ASTM A479 / A479M – 10 ; Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

12-17) ASTM A49 – 01(2006) ; Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed 공동 바, 위조 된 탄소 강철은 공동 바 타협

12-18) ASTM A492 – 95(2009) ; 스테인레스 스틸 와이어 로프에 대한 표준 규격

12-19) ASTM A499 – 89(2008) ; 스틸 바 및 도형에 대한 표준 규격, "T"레일에서 압연 탄소

12-20) ASTM A510 – 08 ; Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, 탄소강

12-21) ASTM A575 – 96(2007) ; 스틸 바의 표준 사양, 탄소, 상인 품질, M-등급

12-22) ASTM A576 – 90B(2006) ; 스틸 바의 표준 사양, 탄소, 핫 단조, 특별 품질

12-23) ASTM A580 / A580M – 08 ; Standard Specification for Stainless Steel Wire

12-24) ASTM A586 – 04a(2009)e1 ; Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

12-25) ASTM A603 – 98(2009)e1 ; Standard Specification for Zinc-Coated Steel Structural Wire Rope

12-26) ASTM A627 – 03 ; 도구 - 저항 스틸 바의 표준 시험 방법, 아파트, 구금 및 교정 시설에 대한 형태

12-27) ASTM A627 – 03 ; 도구 - 저항 스틸 바의 표준 시험 방법, 아파트, 구금 및 교정 시설에 대한 형태

12-28) ASTM A663 / A663M – 89(2006) ; standard Specification for Steel Bars, 탄소, 상인 품질, 기계적 성질

12-29) ASTM A666 – 03 ; Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, 조각, 판, 플랫 바

12-30) ASTM A706 / A706M – 09B ; Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

12-31) ASTM A764 – 07 ; 금속 코팅 탄소 철강 선을위한 표준 규격, 크기에 코팅 기계 스프링스 크기에 그린

12-32) ASTM C933 – 09 ; Standard Specification for Welded Wire Lath

12-33) BDS ISO 1035-1:2006 ; Hot-rolled steel bars-Part 1: Dimensions of round bars.

12-34) BDS ISO 1035-2:2006 ; Hot-rolled steel bars-Part 2: Dimensions of square bars.

12-35) BDS ISO 1035-3:2006 ; Hot-rolled steel bars-Part 3: Dimensions of flat bars.

12-36) BDS ISO 1035-4:2006 ; Hot-rolled steel bars-Part 4: Tolerances.

12-37) BDS ISO 4951-1:2008 ; High yield strength steel bars and sections — Part 1: General delivery requirements

12-38) BDS ISO 4951-2:2008 ; High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels

12-39) BDS ISO 4951-3:2008 ; High yield strength steel bars and sections — Part 3: Delivery conditions for thermo mechanically-rolled steels

 

 

11. Steel Pipe, Tube and Fittings

29 Nov 2014 댓글
떨어져서

건설자재 시험 및 인증 관련 규격목록 11

11. Steel Pipe, Tube and Fittings
11-1) ASTM A105 / A105M – 09 ; Standard Specification for Carbon Steel Forgings for Piping Applications
11-2) ASTM A106 / A106M – 08 ; Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
11-3) ASTM A134 – 96(2005) ; 파이프에 대한 표준 규격, 강철, 전기 - 퓨전 (호)-용접 (크기 NPS 16 오버)
11-4) ASTM A139 / A139M – 04 ; 전기 - 퓨전에 대한 표준 규격 (호)-용접 강관 (NPS 4 오버)
11-5) ASTM A181 / A181M – 06 ; Standard Specification for Carbon Steel Forgings, 범용 배관 용
11-6) ASTM A182 / A182M – 09a ; Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, 단조 피팅, 및 밸브 및 고온 서비스에 대한 부품
11-7) ASTM A234 / A234M – 07 ; Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
11-8) ASTM A252 – 98(2007) ; Standard Specification for Welded and Seamless Steel Pipe Piles
11-9) ASTM A254 – 97(2007) ; Standard Specification for Copper-Brazed Steel Tubing
11-10) ASTM A268 / A268M – 10 ; Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
11-11) ASTM A269 – 10 ; Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
11-12) ASTM A270 – 03a(2008)e1 ; Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
11-13) ASTM A312 / A312M – 09 ; Standard Specification for Seamless, 용접, and Heavily Cold
11-14) ASTM A333 / A333M – 10 ; Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
11-15) ASTM A334 / A334M – 04a ; 저온 서비스를위한 이음새가없고는 용접 탄소 및 합금 강관에 대한 표준 규격
11-16) ASTM A403 / A403M – 09 ; Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
11-17) ASTM A420 / A420M – 07 ; Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
11-18) ASTM A423 / A423M – 09 ; 원활한 및 전기 용접 저 합금 강관에 대한 표준 규격
11-19) ASTM A450 / A450M – 09 ; Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
11-20) ASTM A500 / A500M – 10 ; Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
11-21) ASTM A501 – 07 ; Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
11-22) ASTM A522 / A522M – 07 ; Standard Specification for Forged or Rolled 8 과 9% 니켈 합금 강철 플랜지, 피팅, 밸브, 저온 서비스를위한 부품
11-23) ASTM A524 – 96(2005) ; 원활한 탄소 강철 대기에 대한 파이프와 낮은 온도에 대한 표준 규격
11-24) ASTM A53 / A53M – 07 ; 파이프에 대한 표준 규격, 강철, 블랙과 핫 담근, 아연 도금, 용접 및 원활한
11-25) ASTM A530 / A530M – 04a ; Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
11-26) ASTM A589 / A589M – 06 ; 원활한 및 용접 탄소 강철 물 우물 파이프에 대한 표준 규격
11-27) ASTM A618 / A618M – 04 ; 에 대한 표준 규격 용접 핫 형성 및 원활한 고강도 저 합금 구조상 배관
11-28) ASTM A632 – 04(2009) ; 이음새가없고는 용접 된 오스테 나이트 계 스테인리스 배관에 대한 표준 규격 (소경) 일반 서비스에 대한
11-29) ASTM A707 / A707M – 02(2007) ; Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
11-30) ASTM A733 – 03(2009)e1 ; Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
11-31) ASTM A778 – 01(2009)e1 ; Standard Specification for Welded, 어닐링되지 오스테 나이트 계 스테인리스 관 제품
11-32) ASTM A807 / A807M – 02(2008) ; 하수구 및 다른 응용 프로그램에 대한 골판지 철강 구조 플레이트 파이프를 설치하는 데 대한 일반적인 연습
11-33) ASTM A865 / A865M – 06 ; 나사 커플 링에 대한 표준 규격, 강철, 검정 또는 아연 도금 (아연 도금) 용접 또는 원활한, 강관 조인트의 사용을위한
11-34) BDS ISO 3419:2008 ; Non – alloy and alloy steel butt–welding fittings
11-35) BDS ISO 3545-3:2008 ; Steel tubes and fittings – Symbols for use in specifications – Part 3: Tubular fittings with circular cross-section
11-36) BDS ISO 4144:2008 ; Pipe work – Stainless steel fittings threaded in accordance with ISO 7-1
11-37) BDS ISO 4145:2008 ; Non-alloy steel fittings threaded to ISO 7-1
11-38) BDS ISO 49:2008 ; Malleable cast iron fittings threaded to ISO 7-1
11-39) BDS ISO 5251:2008 ; Stainless steel butt–welding fittings

 

10. Steel Plate, Sheet and Strips

29 Nov 2014 댓글
떨어져서

건설자재 시험 및 인증 관련 규격목록 10

10. Steel Plate, Sheet and Strips

10-1) ASTM A1008 / A1008M – 10 ; 철강에 대한 표준 규격, 시트, 냉연, 탄소, 구조상의, 고강도 저 합금, 개선 된 성형 성을 가진 고강도 저 합금, 솔루션 강화, 구워 경화

10-2) ASTM A109 / A109M – 08 ; 철강에 대한 표준 규격, 조각, 탄소 (0.25 최대 비율), 냉연

10-3) ASTM A123 / A123M – 09 ; Standard Specification for Zinc (용융 아연 도금) 철강 제품에 코팅

10-4) ASTM A167 – 99(2009) ; 스테인레스와 내열 크롬 - 니켈 강판에 대한 표준 규격, 시트, 및 스트립

10-5) ASTM A176 – 99(2009) ; 스테인레스와 내열 크롬 강판에 대한 표준 규격, 시트, 및 스트립

10-6) ASTM A240 / A240M – 10 ; Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, 시트, and Strip for Pressure Vessels and for

10-7) ASTM A263 – 09 ; Standard Specification for Stainless Chromium Steel-Clad Plate

10-8) ASTM A264 – 09 ; Specification for Stainless Chromium-Nickel Steel-Clad Plate

10-9) ASTM A285 / A285M – 03(2007) ; 압력 용기 용 후판에 대한 표준 규격, 탄소강, 낮은- 중간 - 인장 강도

10-10) ASTM A328 / A328M – 07 ; 강판 말뚝 박기에 대한 표준 규격

10-11) ASTM A414 / A414M – 10 ; 철강에 대한 표준 규격, 시트, 탄소, 고강도, 저 합금 압력 용기에 대한

10-12) ASTM A424 / A424M – 09a ; 철강에 대한 표준 규격, 시트, 도자기 에나멜에 대한

10-13) ASTM A463 / A463M – 09a ; 강판에 대한 표준 규격, 알루미늄 코팅, 용융 공정에 의해

10-14) ASTM A480 / A480M – 10 ; Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, 시트, 및 스트립

10-15) ASTM A505 – 00(2005) ; 철강에 대한 표준 규격, 시트 및 스트립, 합금, 열간 압연 및 냉간 압연, 에 대한 일반 요구 사항

10-16) ASTM A506 – 05 ; Standard Specification for Alloy and Structural Alloy Steel, 시트 및 스트립, 열간 압연 및 냉간 압연

10-17) ASTM A507 – 10 ; Standard Specification for Drawing Alloy Steel, 시트 및 스트립, 열간 압연 및 냉간 압연

10-18) ASTM A568 / A568M – 09a ; 철강에 대한 표준 규격, 시트, 탄소, 구조상의, 고강도, 저 합금, 열간 압연 및 냉간 압연, 에 대한 일반 요구 사항

10-19) ASTM A577 / A577M – 90(2007) ; 강판의 초음파 각도 빔 시험에 대한 표준 규격

10-20) ASTM A578 / A578M – 07 ; 특수 응용 프로그램 용 압연 강판의 직선 빔 초음파 검사에 대한 표준 규격

10-21) ASTM A599 / A599M – 07 ; 주석 밀 제품의 표준 사양, 전해 주석 코팅, 냉간 압연 시트

10-22) ASTM A606 / A606M – 09a ; 철강에 대한 표준 규격, 시트 및 스트립, 고강도, 저 합금, 열간 압연 및 냉간 압연, 개선 된 대기 부식 저항

10-23) ASTM A635 / A635M – 09B ; 철강에 대한 표준 규격, 시트 및 스트립, 무거운 두께의 코일, 열연, 합금, 탄소, 구조상의, 고강도 저 합금, 개선 된 성형 성을 가진 고강도 저 합금, 에 대한 일반 요구 사항

10-24) ASTM A653 / A653M – 09a ; 강판에 대한 표준 규격, 아연 도금 (아연 도금) 또는 아연 - 철 합금 코팅 (합금화 용융 아연 도금) 용융 공정에 의해

10-25) ASTM A653 / A653M – 09a ; 강판에 대한 표준 규격, 아연 도금 (아연 도금) 또는 아연 - 철 합금 코팅 (합금화 용융 아연 도금) 용융 공정에 의해

10-26) ASTM A653 / A653M – 09a ; 강판에 대한 표준 규격, 아연 도금 (아연 도금) 또는 아연 - 철 합금 코팅 (합금화 용융 아연 도금) 용융 공정에 의해

10-27) ASTM A666 – 03 ; Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, 조각, 판, 플랫 바

10-28) ASTM A690 / A690M – 07 ; 고강도 저 합금 니켈에 대한 표준 규격, 구리, 해양 환경에서 사용하기 위해 대기 부식 저항과 말뚝 박기 인 강철 H-말뚝 및 시트

10-29) ASTM A775 / A775M – 07B ; Standard Specification for Epoxy-Coated Steel Reinforcing Bars

10-30) ASTM A792 / A792M – 09a ; 강판에 대한 표준 규격, 55 % 알루미늄 아연 용융 공정으로 합금 - 코팅

10-31) ASTM A857 / A857M – 07 ; 강판 말뚝 박기에 대한 표준 규격, 성형 콜드, 라이트 게이지

10-32) ASTM A875 / A875M – 09a ; 강판에 대한 표준 규격, 아연 - 5 % 알루미늄 용융 공정으로 합금 - 코팅

10-33) ASTM A879 / A879M – 06 ; 강판에 대한 표준 규격, 각각의 표면에 코팅 질량의 지정을 요구하는 응용 프로그램에 대해 전해 프로세스에 의해 코팅 아연

10-34) ASTM A929 / A929M – 01(2007) ; 강판에 대한 표준 규격, 골판지 철강 파이프에 대한 용융 공정에 의해 금속 - 코팅

10-35) BDS 1122 : 1985 ; Specification for Hot-dip Galvanized Steel Sheet and Coil;

10-36) BDS 868 : 1978 ; Code of Practice for Galvanized Corrugated Sheet Roof and Wall Coverings;

10-37) BDS ISO 16160:2011 ; Continuously hot-rolled steel sheet products — Dimensional and shape tolerances

10-38) BDS ISO 16163:2011 ; Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances

10-39) BDS ISO 4995:2006 ; Hot-rolled steel sheet of structural quality

10-40) BDS ISO 7452:2008 ; Hot-rolled structural steel plates — Tolerances on dimensions and shape

10-41) BDS ISO 7778:2008 ; Steel plate with specified through-thickness characteristics

10-42) BDS ISO 7788:2008 ; Steel – Surface finish of hot-rolled plates and wide flats – Delivery requirements

10-43) BDS ISO 9034:2008 ; Hot-rolled structural steel wide flats – Tolerances on dimensions and shape

10-44) BDS ISO 9328-1:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 1: 일반 요구 사항

10-45) BDS ISO 9328-2:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties

10-46) BDS ISO 9328-3:2009 ; Steel flat products for pressure purposes — Technical delivery conditions —Part 3: Weldable fine grain steels, normalized

10-47) BDS ISO 9328-4:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties

10-48) BDS ISO 9328-5:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermo mechanically rolled

10-49) BDS ISO 9328-6:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered

10-50) BDS ISO 9328-7:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 7: 스테인리스 강

10-51) BDS ISO 9364:2011 ; Continuous hot-dip aluminium/zinc coated steel sheet of commercial, drawing and structural qualities

10-52) BDS ISO16162:2011 ; Continuously cold-rolled steel sheet products — Dimensional and shape tolerances

10-53) IS 1079 : 1994 ; Specification for hot rolled carbon steel sheet and strip (fifth revision)

10-54) IS 3502 : 1994 ; Specification for steel chequered plates (second revision)

10-55) IS 4030 : 1973 ; Specification for Cold-Rolled Carbon Steel Strip for General Engineering Purposes (First Revision);

10-56) IS 412 : 1975 ; Specification for Expanded Metal Steel Sheets for General Purposes (Second Revision);

10-57) IS 7226 : 1974 ; Specification for Cold-Rolled Medium, High Carbon and Low-Alloy Steel Strip for General Engineering Purposes;

9.STEEL

29 Nov 2014 댓글
떨어져서

건설자재 시험 및 인증 관련 규격목록 9

9.STEEL

9-1) ASTM A1008 / A1008M – 10 ; 철강에 대한 표준 규격, 시트, 냉연, 탄소, 구조상의, 고강도 저 합금, 개선 된 성형 성을 가진 고강도 저 합금, 솔루션 강화, 구워 경화

9-2) ASTM A1011 / A1011M – 10 ; 철강에 대한 표준 규격, 시트 및 스트립, 열연, 탄소, 구조상의, 고강도 저 합금, 개선 된 성형 성을 가진 고강도 저 합금, 및 초 고강도

9-3) ASTM A148 / A148M – 08 ; 강철 주물을위한 표준 규격, 고강도, 구조용

9-4) ASTM A242 / A242M – 04(2009) ; Standard Specification for High-Strength Low-Alloy Structural Steel

9-5) ASTM A252 – 98(2007) ; Standard Specification for Welded and Seamless Steel Pipe Piles

9-6) ASTM A27 / A27M – 08 ; 강철 주물을위한 표준 규격, 탄소, 일반 응용 프로그램에 대한

9-7) ASTM A283 / A283M – 03(2007) ; Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

9-8) ASTM A307 – 07B ; Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

9-9) ASTM A325 – 09ae1 ; Standard Specification for Structural Bolts, 강철, 열처리, 120/105 KSI 최소 인장 강도

9-10) ASTM A325M – 09 ; Standard Specification for Structural Bolts, 강철, 열처리 830 MPA는 최소 인장 강도 [미터]

9-11) ASTM A336 / A336M – 09 ; Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

9-12) ASTM A36 / A36M – 08 ; Standard Specification for Carbon Structural Steel

9-13) ASTM A449 – 07B ; Standard Specification for Hex Cap Screws, 볼트와 스터드, 강철, 열처리, 120/105/90 KSI 최소 인장 강도, 일반적인 사용

9-14) ASTM A48 / A48M – 03(2008) ; 회색 철 주물을위한 표준 규격

9-15) ASTM A490 – 09 ; Standard Specification for Structural Bolts, 합금강, 열처리, 150 KSI 최소 인장 강도

9-16) ASTM A500 / A500M – 10 ; Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

9-17) ASTM A501 – 07 ; Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

9-18) ASTM A514 / A514M – 05(2009) ; 높은 수율 - 강도에 대한 표준 규격, 조질 합금 강판, 용접에 적합

9-19) ASTM A529 / A529M – 05(2009) ; 구조 품질의 고강도 탄소 망간강에 대한 표준 규격

9-20) ASTM A53 / A53M – 07 ; 파이프에 대한 표준 규격, 강철, 블랙과 핫 담근, 아연 도금, 용접 및 원활한

9-21) ASTM A563 – 07a ; Standard Specification for Carbons and Alloy Steel Nuts

9-22) ASTM의 A563M – 07 ; 탄소 및 합금 강철 너트에 대한 표준 규격 [미터]

9-23) ASTM A572 / A572M – 07 ; Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

9-24) ASTM A588 / A588M – 05 ; Standard Specification for High-Strength Low-Alloy Structural Steel, 까지 50 KSI [345 MPA는] 최소 항복점, 대기 부식 저항

9-25) ASTM A606 / A606M – 09a ; 철강에 대한 표준 규격, 시트 및 스트립, 고강도, 저 합금, 열간 압연 및 냉간 압연, 개선 된 대기 부식 저항

9-26) ASTM A618 / A618M – 04 ; 에 대한 표준 규격 용접 핫 형성 및 원활한 고강도 저 합금 구조상 배관

9-27) ASTM A653 / A653M – 09a ; 강판에 대한 표준 규격, 아연 도금 (아연 도금) 또는 아연 - 철 합금 코팅 (합금화 용융 아연 도금) by the

9-28) ASTM A666 – 03 ; Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, 조각, 판, 플랫 바

9-29) ASTM A668 / A668M – 04(2009) ; 단강 품에 대한 표준 규격, 탄소 및 합금, 일반 산업용

9-30) ASTM A690 / A690M – 07 ; 고강도 저 합금 니켈에 대한 표준 규격, 구리, 해양 환경에서 사용하기 위해 대기 부식 저항과 말뚝 박기 인 강철 H-말뚝 및 시트

9-31) ASTM A852 / A852M – 03(2007) ; Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 KSI [485 MPA는] Minimum Yield Strength to 4 in. [100 mm] Thick

9-32) BDS 1429:1993 ; Light gauge steel sections

9-33) BDS ISO 10474:2008 ; Steel and steel products — Inspection documents

9-34) BDS ISO 1127: 2006 ; Stainless steel tubes – 치수, tolerances and conventional masses per unit length.

9-35) BDS ISO 14284:2008 ; Steel and iron — Sampling and preparation of samples for the determination of chemical composition

9-36) BDS ISO 20723:2008 ; Structural steels — Surface condition of hot-rolled sections — Delivery requirements

9-37) BDS ISO 24314:2008 ; Structural steels — Structural steels for building with improved seismic resistance — Technical delivery conditions

9-38) BDS ISO 2566-1:2008 ; Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels

9-39) BDS ISO 2566-2:2008 ; 강철 – Conversion of elongation values – Part 2: Austenitic steels

9-40) BDS ISO 404:2008 ; Steel and steel products–General technical delivery requirements

9-41) BDS ISO 4200: 2006 ; Plain end steel tubes, welded and seamless – General tables of dimensions and masses per unit length.

9-42) BDS ISO 657-1:2008 ; Hot-rolled steel sections – Part 1: Equal-leg angles – Dimensions

9-43) BDS ISO 657-11:2008 ; Hot-rolled steel sections — Part 11: Sloping flange channel sections (Metric series) — Dimensions and sectional properties

9-44) BDS ISO 657-15:2008 ; Hot-rolled steel sections – Part 15 Sloping flange beam sections (Metric series) – Dimensions and sectional properties

9-45) BDS ISO 657-16:2008 ; Hot-rolled steel sections — Part 16: Sloping flange column sections (metric series) — Dimensions and sectional properties

9-46) BDS ISO 657-18:2008 ; Hot-rolled steel sections — Part 18: L sections for shipbuilding (metric series) 104— Dimensions, sectional properties and tolerances

9-47) BDS ISO 657-19:2008 ; Hot-rolled steel sections — Part 19: Bulb flats (metric series) — Dimensions, sectional properties and tolerances

9-48) BDS ISO 657-2:2008 ; Hot-rolled steel sections – Part 2: Unequal-leg angles – Dimensions

9-49) BDS ISO 657-21:2008 ; Hot-rolled steel sections – Part 21 T-sections with equal depth and flange width – 치수

9-50) BDS ISO 657-5:2008 ; Hot-rolled steel sections -Part V Equal-leg angles and unequal leg angles – Tolerances for metric and inch series

9-51) BDS ISO 6761:2008 ; Steel tubes – Preparation of ends of tubes and fittings for welding

9-52) BDS ISO 6929:2008 ; Steel products — Definition and classification

9-53) BDS ISO 9769:2008 ; Steel and iron — Review of available methods of analysis

 

8. FLOORING MATERIALS

29 Nov 2014 댓글
떨어져서

건설자재 시험 및 인증 관련 규격목록 8

8. FLOORING MATERIALS

8-1) BDS 1248 : 1989 ; Ceramic Unglazed Vitreous acid resistant tilesIt covers the requirements for ceramic unglazed vitreous acid resistant tiles used in laying of floors & lining of tanks subjected to corrosive conditions. Manufacture, Finish, Tests etc.

8-2) BDS 1262 : 1990 ; Clay flooring tilesIt specifies the requirements for dimensions, quality & strength for clay flooring tiles & different types of tests.

8-3) BDS EN 1024: 2008 ; Clay roofing tiles for discontinuous laying — Determination of geometric characteristics

8-4) BDS EN 1304: 2008 ; Clay roofing tiles and fittings — Product definitions and specifications

8-5) BDS EN 13748‐1: 2008 ; Terrazzo tiles — Part 1: 내부 용 테라 타일

8-6) BDS EN 13748‐2: 2008 ; Terrazzo tiles — Part 2: 외부 사용을위한 테라 타일

8-7) BDS EN 490: 2008 ; Concrete roofing tiles and fittings for roof covering and all cladding — Product specifications.

8-8) BDS EN 491: 2008 ; Concrete roofing tiles and fittings for roof covering and wall cladding — Test methods

8-9) BDS EN 538: 2008 ; Clay roofing tiles for discontinuous laying — Flexural strength test

8-10) BDS EN 539‐1: 2008 ; Clay roofing tiles for discontinuous laying Determination of physical characteristics — Part 1: Impermeability test

8-11) BDS ISO 10545 ‐1 : 2006 ; Ceramic tiles, Sampling and basis for acceptance. Specifies rules for batching, sampling, inspection and acceptance/rejection of ceramic tiles.

8-12) BDS ISO 10545 ‐10 : 2006 ; Ceramic tiles, Determination of moisture expansion.

8-13) BDS ISO 10545 ‐11 : 2006 ; Ceramic tiles, Determination of crazing resistance for glazed tiles.

8-14) BDS ISO 10545 ‐12 : 2006 ; Ceramic tiles, Determination of frost resistance.

8-15) BDS ISO 10545 ‐13 : 2006 ; Ceramic tiles, Determination of chemical resistance.

8-16) BDS ISO 10545 ‐14 : 2006 ; Ceramic tiles, Determination of resistance to stains.

8-17) BDS ISO 10545 ‐15 : 2006 ; Ceramic tiles, Determination of lead and cadmium given off by glazed tiles.

8-18) BDS ISO 10545 ‐16 : 2006 ; Ceramic tiles, Determination of small color differences.

8-19) BDS ISO 10545 ‐2 : 2006 ; Ceramic tiles, Determination of dimensions and surface quality Specifies methods for determining the dimensional characteristics (length, width, thickness, straightness of sides, rectangularity, and surface flatness) and the surface of ceramic tiles.

8-20) BDS ISO 10545 ‐3 : 2006 ; Ceramic tiles, 흡수율 결단, apparent porosity, apparent relative density and bulk density.

8-21) BDS ISO 10545 ‐4 : 2006 ; Ceramic tiles, Determination of modulus of rupture and breaking strength

8-22) BDS ISO 10545 ‐5 : 2005 ; Ceramic tiles, Determination of impact resistance by measurement of coefficient of restitution

8-23) BDS ISO 10545 ‐6 : 2006 ; Ceramic tiles, Determination of resistance to deep abrasion for unglazed tiles.

8-24) BDS ISO 10545 ‐7 : 2006 ; Ceramic tiles, Determination of resistance to surface abrasion for glazed tiles.

8-25) BDS ISO 10545 ‐8 : 2006 ; Ceramic tiles, Determination of linear thermal expansion

8-26) BDS ISO 10545 ‐9 : 2006 ; Ceramic tiles, Determination of resistance to thermal shock.

8-27) BDS ISO 13006 : 2006 ; Ceramic tiles ‐ Definitions, 분류, Characteristics and Marking.

7. GYPSUM BASED MATERIALS AND PLASTER

29 Nov 2014 댓글
떨어져서

건설자재 시험 및 인증 관련 규격목록 7

7. GYPSUM BASED MATERIALS AND PLASTER

7-1) ASTM C1396 / C1396M – 09a ; Standard Specification for Gypsum Board

7-2) ASTM C1396 / C1396M – 09a ; Standard Specification for Gypsum Board

7-3) ASTM C1396 / C1396M – 09a ; Standard Specification for Gypsum Board

7-4) ASTM C1396 / C1396M – 09a ; Standard Specification for Gypsum Board

7-5) ASTM C1396 / C1396M – 09a ; Standard Specification for Gypsum Board

7-6) ASTM C22 / C22M – 00(2005)e1 ; Standard Specification for Gypsum

7-7) ASTM C28 / C28M – 00(2005) ; Standard Specification for Gypsum Plasters

7-8) ASTM C317 / C317M – 00(2005) ; Standard Specification for Gypsum Concrete

7-9) ASTM C35 – 01(2009) ; Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster

7-10) ASTM C471M – 01(2006)e1 ; Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products [미터]

7-11) ASTM C472 – 99(2009) ; Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete

7-12) ASTM C473 – 09 ; Standard Test Methods for Physical Testing of Gypsum Panel Products

7-13) ASTM C474 – 05 ; Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

7-14) ASTM C587 – 04 ; Standard Specification for Gypsum Veneer Plaster

7-15) ASTM C59 / C59M – 00(2006) ; Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster

7-16) IS 2849-1983 ; Specification for Non-Load Bearing Gypsum Partition Blocks (Solid and Hollow Types)

6. BUILDING LIMES

29 Nov 2014 댓글
떨어져서

건설자재 시험 및 인증 관련 규격목록 6

6. BUILDING LIMES

6-1) IS 10360-1982 ; Specification for Lime-Pozzolana Concrete Blocks for Paving;

6-2) IS 10772-1983 ; Specification for quick setting lime pozzolana mixture

6-3) IS 12894-2002 ; Specification for pulverized fuel ash lime bricks (First Revision)

6-4) IS 1624 – 1986 ; Method of field testing of building lime ( first revision )

6-5) IS 1624:1986 ; Method of field testing of building lime (first revision)

6-6) IS 2686-1977 ; Specification for Cinder Aggregates for Use in Lime Concrete (First Revision);

6-7) IS 3068-1986 ; Specification for Broken Brick (burnt clay) Coarse Aggregates for Use in Lime Concrete (Second Revision);

6-8) IS 3115-1992 ; Specification for Lime-based Blocks (Second Revision);

6-9) IS 3182-1986 ; Specification for Broken Brick (burnt clay) Fine Aggregates for Use in Lime Mortar (second revision)

6-10) IS 4098-1983 ; Specification for Lime-Pozzolana Mixture (First Revision);

6-11) IS 4139-1989 ; Specification for Sand-lime Bricks (SecondRevision);

6-12) IS 6932 (Parts I to X – 1973; Part XI-1983) ; Method of Tests for Building Limes.

6-13) IS 712- 1984 ; Specification for building limes (third revision)

6-14) IS 712:1984 ; Specification for building limes (third revision)