EUROCODE Introduction

09 Apr 2014 댓글
떨어져서

1. EUROCODE 소개

유로 코드는 건물 및 토목 공학 작품에 대한 유럽의 구조물 설계 규정으로써 유럽 연합 (EU)의 회원국의 전문 지식을 통합하여 지난 30 년 동안 개발된 가장 진보 규정 중의 하나 입니다.
유로 코드는 유럽의 공공 및 민간 부문에 대해 의무적으로 적용되는 사실상의 가장 근본적인 표준이며, 유럽 및 전세계에서 통용되는 구조물의 평가의 표준적 프레임 워크를 제공하며 나아가 CE Marking의은 근본적 규정이 됩니다

유로코드의 분류는 다음과 같습니다.

0 – Basis

Eurocode 0: Basis of structural design

1 – Actions

Eurocode 1: Actions on structures – Part 1-1: General actions – Densities, self-weight and imposed loads

Eurocode 1: Actions on structures – Part 1-2: General actions – Actions on structures exposed to fire

Eurocode 1: Actions on structures – Part 1-3: General actions – Snow loads

Eurocode 1: Actions on structures – Part 1-4: General actions – Wind actions

Eurocode 1: Actions on structures – Part 1-5: General actions – Thermal actions

Eurocode 1: Actions on structures – Part 1-6: General actions – Actions during execution

Eurocode 1: Actions on structures – Part 1-7: General actions – Accidental actions

Eurocode 1: Actions on structures – Part 2: Traffic loads on bridges

Eurocode 1: Actions on structures – Part 3: Actions induced by cranes and machinery

Eurocode 1: Actions on structures – Part 4: Silos and tanks

2 – Concrete

Eurocode 2: Design of concrete structures – Part 1-1: General – Common rules for building and civil engineering structures

Eurocode 2: Design of concrete structures – Part 1-2: General – Structural fire design

Eurocode 2: Design of concrete structures – Part 2: Bridges

Eurocode 2: Design of concrete structures – Part 3: Liquid retaining and containment structures

Eurocode 2 packages

2/1 Design of concrete building and civil engineering structures (excluding bridges and liquid retaining and containment structures)

2/2 Design of concrete bridges

2/3 Design of concrete liquid-retaining and containment structures

3 – 강철

Eurocode 3: Design of steel structures – Part 1-1: General rules and rules for buildings

Eurocode 3: Design of steel structures – Part 1-2: General – Structural fire design

Eurocode 3: Design of steel structures – Part 1-3: General – Cold formed thin gauge members and sheeting

Eurocode 3: Design of steel structures – Part 1-4: General – Structures in stainless steel

Eurocode 3: Design of steel structures – Part 1-5: General – Strength and stability of planar plated structures without transverse loading

Eurocode 3: Design of steel structures – Part 1-6: General – Strength and stability of shell structures

Eurocode 3: Design of steel structures – Part 1-7: General – Design values for plated structures subjected to out of plane loading

Eurocode 3: Design of steel structures – Part 1-8: General – Design of joints

Eurocode 3: Design of steel structures – Part 1-9: General – Fatigue strength

Eurocode 3: Design of steel structures – Part 1-10: General – Material toughness and through thickness assessment

Eurocode 3: Design of steel structures – Part 1-11: General – Design of structures with tension components

Eurocode 3: Design of steel structures – Part 1-12: General – Supplementary rules for high strength steels

Eurocode 3: Design of steel structures – Part 2-1: Bridges

Eurocode 3: Design of steel structures – Part 3-1 Towers, masts and chimneys – Towers and masts

Eurocode 3: Design of steel structures – Part 3-2: Towers, masts and chimneys – Chimneys

Eurocode 3: Design of steel structures – Part 4-1: Silos, tanks and pipelines – Silos

Eurocode 3: Design of steel structures – Part 4-2: Silos, tanks and pipelines – Tanks

Eurocode 3: Design of steel structures – Part 4-3: Silos, tanks and pipelines – Pipelines

Eurocode 3: Design of steel structures – Part 5: Piling

Eurocode 3: Design of steel structures – Part 6: Crane supporting structures

Eurocode 3 packages

3/1 Design of steel building and civil engineering structures (excluding bridges, silos, tanks and pipelines, steel piling, crane supporting structures, and towers and masts)

3/2 Design of steel bridges

3/3 Design of steel silos, tanks and pipelines

3/4 Design of steel piling

3/5 Design of steel crane-supporting structures

3/6 Design of steel towers and masts

4 – Composite

Eurocode 4: Design of composite steel and concrete structures – Part 1-1: General – Common rules and rules for buildings

Eurocode 4: Design of composite steel and concrete structures – Part 1-2: General – Structural fire design

Eurocode 4: Design of composite steel and concrete structures – Part 2: Bridges

Eurocode 4 packages

4/1 Design of composite steel and concrete building and civil engineering structures (excluding bridges)

4/2 Design of composite steel and concrete bridges

5 – Timber

Eurocode 5: Design of timber structures – Part 1-1: General – Common rules and rules for buildings

Eurocode 5: Design of timber structures – Part 1-2: General – Structural fire design

Eurocode 5: Design of timber structures – Part 2: Bridges

Eurocode 5 packages

5/1 Design of timber buildings and civil engineering structures (excluding bridges)

5/2 Design of timber bridges

6 – Masonry

Eurocode 6: Design of masonry structures – Part 1-1: General – Rules for reinforced and unreinforced masonry, including lateral loading

Eurocode 6: Design of masonry structures – Part 1-2: General – Structural fire design

Eurocode 6: Design of masonry structures – Part 2: Selection and execution of masonry

Eurocode 6: Design of masonry structures – Part 3: Simplified calculation methods for masonry structures

Eurocode 6 packages

6 Design of masonry building and civil engineering structures (excluding bridges)

7 – Geo​-​technical

Eurocode 7: Geotechnical design – Part 1: General rules

Eurocode 7: Geotechnical design – Part 2: Ground investigation and testing

8 – Earthquake

Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules seismic actions and rules for buildings

Eurocode 8: Design of structures for earthquake resistance – Part 2: Bridges

Eurocode 8: Design of structures for earthquake resistance – Part 3: Strengthening and repair of buildings

Eurocode 8: Design of structures for earthquake resistance – Part 4: Silos, tanks and pipelines

Eurocode 8: Design of structures for earthquake resistance – Part 5: Foundations, retaining structures and geotechnical aspects

Eurocode 8: Design of structures for earthquake resistance – Part 6: Towers, masts and chimneys

9 – Aluminium​

Eurocode 9: Design of aluminium structures – Part 1-1: General – Common rules

Eurocode 9: Design of aluminium structures – Part 1-2: General – Structural fire design

Eurocode 9: Design of aluminium structures – Part 1-3: Additional rules for structures susceptible to fatigue

Eurocode 9: Design of aluminium structures – Part 1-4: Supplementary rules for trapezoidal sheeting

Eurocode 9: Design of aluminium structures – Part 1-5: Supplementary rules for shell structures

Eurocode 9 packages

9 Design of all aluminium structures

 

Comments are closed.