1 Scope

This standard applies to welded steel vessels and equipment (hereinafter – the vessels), operating at a pressure of more than 16 MPA는 (160 kgf / cm ² ), a vacuum with a residual pressure of at least 665 Pa (5 mm Hg. tbsp.) or without pressure ( for filling) and the wall temperature is not lower than minus 70 ° C, for use in chemical processing plants, petrochemical, refinery, oil, gas and other related industries.

This standard specifies the basic technical requirements for the design, materials, 제조의 (doizgotovleniyu), 시험 방법, acceptance and delivery, reconstruction, 수리, installation vessels and vehicles.

This standard does not apply to:

- Vessels operating under vacuum with a residual pressure of less than 665 Pa (5 mm Hg. Tbsp.)

- Containers intended for transportation of petroleum and chemical products;

- Cylinders for compressed, liquefied and dissolved gases;

- Tubular furnace;

- Tanks (containers) for storage of chemicals and petroleum products, projected in accordance with building codes and special rules.

In addition to the requirements of this standard should be guided by the rules and regulations on industrial safety.

2 Normative references

Used in the standard normative references to the following standards:

GOST R 2.901 99-Unified system for design documentation. Documentation is sent abroad. 일반 요구 사항

비용 12.4.026-2001 safety standards system. Color signaling, safety signs and markings warning. Purpose and application rules. General technical requirements and specifications. 시험 방법

GOST R 50460 – 92 Mark of conformity with the mandatory certification. The shape, size and technical requirements

GOST R 52627 – 2006 (ISO 898-1:1999) Bolts, screws and studs. Mechanical Properties and Test Methods

비용 2.601-2006 Unified system for design documentation. Operational documents

비용 9.014 78-Unified system of corrosion and aging. Temporary corrosion protection products. 일반 요구 사항

비용 9.402-2004 Unified system of corrosion and aging. Paint coatings. Preparation of metal surfaces for painting

비용 12.1.005-88 safety standards system. Common sanitary – hygienic requirements to the working area

비용 12.1.007-76 safety standards system. Harmful Substances 분류 and general safety requirements

비용 19.402 78-Unified system for program documentation. Program Description

GOST-85 26,008 fonts for printing, engraving method applied. And E XECUTIVE sizes

비용 26.020-80 Fonts for measuring instruments and automation. Faces and basic dimensions

비용 356 – 80 fittings and pipe components. Pressure conditional, trial and workers. Rows

Standard 380 – 2005 Common quality carbon steel. Stamps

비용 427 – 75 Rulers measuring metal. Specifications

Standard 492 – 2006 니켈, nickel and copper – nickel processed pressure. Stamps

비용 494 – 90 Pipes made of brass. Specifications

Standard 535 – 2005-rolled and shaped from quality carbon steel. General specifications

비용 550 – 75 seamless steel pipes for the oil and petrochemical industries. Specifications

비용 931 – 90 sheets and strips of brass. Specifications

비용 977 – 88 Steel Castings. General specifications

비용 1050 – 88-rolled, calibrated with special surface finish of quality carbon structural steel. General specifications

비용 1525 – 91 Bars of Monel. Specifications

비용 1577 – 93 Rolled sheets and broadband structural quality steel. Specifications

비용 2991 – 85 planked disposable boxes for loads up to 500 kg. General specifications

비용 3242 – 79 Welded joints. Quality control methods

비용 3262 – 75 steel pipes for water and gas. Specifications

비용 4543 – 71 Rental of alloy structural steel. Specifications

비용 4784 – 97 aluminum and wrought aluminum alloys. Stamps

비용 5063 – 73 Strips of copper – nickel alloys. Specifications

비용 5520 – 79 rolled flat carbon steel, low-alloy and alloy steel for boilers and vessels working under pressure. Specifications

비용 5521 – 93 Rolled steel for shipbuilding. Specifications

비용 5582 – 75 rolled sheets of corrosion – resistant, heat resistant and heat resistant. Specifications

비용 5632 – 72 High-alloy steels corrosion – resistant, heat-resistant and heat-resistant. Stamps

비용 5949 – 75 Steel profiled and calibrated corrosion – resistant, heat-resistant and heat-resistant. Specifications

비용 5959 – 80 boxes of disposable panels for loads up to 200 kg. General specifications

비용 6032 – 2003 (ISO 3651-1:1998, ISO 3651-2:1998) Steels and alloys corrosion – resistant. Methods of test for resistance to intergranular corrosion

비용 6533 – 78 Bottoms elliptical flanged steel for vessels, equipment and boilers. Main dimensions

비용 6996 – 66 Welds. Methods for determining the mechanical properties

비용 7350 – 77 Steel thick corrosion – resistant, heat-resistant and heat-resistant. Specifications

비용 7512 – 82 Non-destructive testing. Welded joints. Radiographic

비용 8479 – 70 Forgings of structural carbon and alloy steel. General specifications

비용 8724 – 2002 (ISO 261 – 98) Basic norms of interchangeability. Metric thread. Diameters and steps

비용 8731 – 74 hot-rolled seamless steel tubes. Technical requirements

비용 8733 – 74 seamless steel pipes and cold-warm-deformed. Technical requirements

비용 9012 – 59 (ISO 410 – 82, ISO 6506 – 81) Metals. Method of Brinell hardness

비용 9013 – 59 (ISO 6508 – 86) Metals. Method of measuring the Rockwell hardness

비용 9045 – 93 cold-rolled sheets of low carbon quality steel for cold forming. Specifications

비용 9466 – 75 Covered electrodes for manual metal arc welding of steels and surfacing. Classification and general specifications

비용 9617 – 76 vessels and vehicles. Rows diameters

비용 9940 – 81 Seamless hot corrosion – resistant steel. Specifications

비용 9941 – 81 Seamless cold – warm-deformed and corrosion – resistant steel. Specifications

비용 10092 – 2006 cupro-nickel tubes for heat exchangers. Specifications

비용 10198 – 91 Wooden boxes for cargo weighing communication. 200 에 20000 kg. General specifications

비용 10494 – 80 Studs for flanged connections with convex seal on P _in excess of 10 에 100 MPA는 (100 에 1000 kgf / cm ² ).Specifications

비용 10495 – 80 Hexagon nuts for flanged connections on P _in excess of 10 에 100 MPA는 (100 에 1000 kgf / cm ² ).Specifications

비용 10702 – 78 Rental of quality structural carbon and alloy steel for cold extrusion and uplift. Specifications

비용 10706 – 76 Electrically welded steel pipes. Technical requirements

비용 10885 – 85 hot-rolled sheet steel double-layer corrosion – resistant. Specifications

비용 11036 – 75 Electrotechnical unalloyed steel billet. Specifications

비용 12620 – 78 Bottoms neotbortovannye conical apex angles of 60, 90 과 120 °. Main dimensions

비용 12621 – 78 Bottoms neotbortovannye conical with an apex angle of 140 °. Main dimensions

비용 12622 – 78 flanged flat bottoms. Main dimensions

비용 12623 – 78 flat bottoms neotbortovannye. Main dimensions

비용 12816 – 80 Flanged valves, fittings and piping on P _from 0.1 에 20.0 MPA는 (from 1 에 200 kgf / cm ² ). General technical requirements

비용 12971 – 67 rectangular plates for machines and devices. Measurements

비용 14192 – 96 Marking of goods

비용 14637 – 89 (ISO 4995 – 75) Plates of quality carbon steel. Specifications

비용 14782 – 86 Non-destructive testing. Welded joints. Ultrasonic methods

비용 15150 – 69 Machinery, equipment and other industrial products. Performance for different climatic regions. Categories, operating, storage and transportation to the impact of climatic factors in the external environment

비용 15527 – 2004 Alloys copper – zinc (brass) processed pressure. Stamps

비용 17217 – 79 tubes of copper – nickel alloy brand MNZH 5-1. Specifications

비용 17232 – 99 plates of aluminum and aluminum alloys. Specifications

비용 17314 – 81 Devices for fixing thermal insulation of steel vessels and vehicles. The design and dimensions. Technical requirements

비용 17375 – 2001 Seamless welded pipeline parts of carbon and low alloy steel. Return bends type 3D (R = 1,5 DN). 디자인

비용 17380 – 2001 (ISO 3419 – 81) Details of pipelines seamless welded carbon and low alloy steel. General specifications

비용 17711 – 93 Alloys of copper – zinc (brass) foundry. Stamps

비용 18442 – 80 Non-destructive testing. Capillary methods. 일반 요구 사항

비용 18475 – 82 Cold Pipes of aluminum and aluminum alloys. Specifications

비용 18482 – 79 tubes of extruded aluminum and aluminum alloys. Specifications

비용 18661 – 73 강철. Hardness measurement by impact indentation

비용 18968 – 73 Bars and strips of corrosion – resistant heat-resistant steel for steam turbine blades. Specifications

비용 19281 – 89 Rental of high-strength steel. General specifications

비용 19903 – 74 Hot-rolled flat. Assortment

비용 20072 – 74 heat-resistant steel. Specifications

비용 20700 – 75 bolts, studs, nuts and washers for flanged connections and anchor, caps and collars with ambient temperatures from 0 에 650 ° C. Specifications

비용 21105 – 87 Non-destructive testing. Magnetic particle

비용 21488 – 97 Pressed bars of aluminum and aluminum alloys. Specifications

비용 21631 – 76 sheets of aluminum and aluminum alloys. Specifications

비용 21646 – 2003 Pipes copper and brass for heat exchangers. Specifications

비용 21650 – 76 Tools bonding packaged – general cargo transport packets in abundance requirements

비용 22727 – 88 Rolled sheet. Ultrasonic inspection methods

비용 23055 – 78 Non-destructive testing. Fusion welding of metals. Classification of welds on the results of radiographic inspection

비용 23304 – 78 bolts, studs, nuts and washers for flanged connections of nuclear power plants. Technical requirements.Acceptance. 시험 방법. Labeling, packaging, transportation and storage

비용 24634 – 81 Wooden boxes for products delivered for export. General specifications

비용 24643 – 81 Basic norms of interchangeability. Tolerances of form and arrangement of surfaces. Numeric values

비용 25054 – 81 Forgings of corrosion – resistant steels and alloys. General specifications

비용 25347 – 82 Basic norms of interchangeability. Uniform system of tolerances and fits . Tolerances and recommended planting

비용 26179 – 84 Basic norms of interchangeability. Dimensional tolerances over 10,000 에 40,000 mm

비용 26364 – 90 ferritometers for austenitic steels. General specifications

비용 26828 – 86 Products in Aerospace Engineering. Labeling

비용 28759.5-90 Flanges of vessels and apparatuses. Technical requirements

Note – When using this standard it is advisable to check the effect of the reference standards in the public information system – the official site of the Federal Agency for Technical Regulation and Metrology on the Internet or on annual basis the information sign “ national standards ”, which is published on the 1st of January of the current year and relevant information published by monthly indexes published in the current year. If the reference standard is replaced (changed), when using this standard should govern replacement (수정) standard. If the reference standard is canceled without replacement, the position in which reference is made ​​to it, apply to the extent not affecting this link.

이하 생략….