Archive for date: 4월 9th, 2014

IN 1991 Eurocode 1 : Actions on structures

09 Apr 2014 댓글
떨어져서

Eurocode에 따른 세부 EN 규격 내용

IN 1991 Eurocode 1 : Actions on structures

IN 1991-1-1 Densities, self-weight and imposed loads for buildings

1. general
2. 요구 사항
3. limit state
4. actions on structures and environmental influences
5. material properties
6. geometrical properties
7. modelling for structural analysis and resistance
8. design by testing and quality control
9. verification by the partial factor method

IN 1991-1-2 General actions – Actions on structures exposed to fire

IN 1991-1-3 General actions – Snow loads

IN 1991-1-4 General actions – Wind actions

IN 1991-1-5 General actions – Thermal actions

1. General
2. Classification of actions
3. Design situation
4. Representation of actions
5. Temperature changes in buildings
6. Temperature changes in bridges
7. Temperature changes in industrial chimneys and pipelines

IN 1991-1-6 General actions – Actions during execution

IN 1991-1-7 Accidental actions due to impact and explosions

IN 1991-2 Traffic loads on bridges

IN 1991-3 Actions induced by cranes and machinery

IN 1991-4 Actions on silos and tanks

EUROCODE Introduction

09 Apr 2014 댓글
떨어져서

1. EUROCODE 소개

유로 코드는 건물 및 토목 공학 작품에 대한 유럽의 구조물 설계 규정으로써 유럽 연합 (EU)의 회원국의 전문 지식을 통합하여 지난 30 년 동안 개발된 가장 진보 규정 중의 하나 입니다.
유로 코드는 유럽의 공공 및 민간 부문에 대해 의무적으로 적용되는 사실상의 가장 근본적인 표준이며, 유럽 및 전세계에서 통용되는 구조물의 평가의 표준적 프레임 워크를 제공하며 나아가 CE Marking의은 근본적 규정이 됩니다

유로코드의 분류는 다음과 같습니다.

0 – Basis

Eurocode 0: Basis of structural design

1 – Actions

Eurocode 1: Actions on structures – Part 1-1: General actions – Densities, self-weight and imposed loads

Eurocode 1: Actions on structures – Part 1-2: General actions – Actions on structures exposed to fire

Eurocode 1: Actions on structures – Part 1-3: General actions – Snow loads

Eurocode 1: Actions on structures – Part 1-4: General actions – Wind actions

Eurocode 1: Actions on structures – Part 1-5: General actions – Thermal actions

Eurocode 1: Actions on structures – Part 1-6: General actions – Actions during execution

Eurocode 1: Actions on structures – Part 1-7: General actions – Accidental actions

Eurocode 1: Actions on structures – Part 2: Traffic loads on bridges

Eurocode 1: Actions on structures – Part 3: Actions induced by cranes and machinery

Eurocode 1: Actions on structures – Part 4: Silos and tanks

2 – Concrete

Eurocode 2: Design of concrete structures – Part 1-1: General – Common rules for building and civil engineering structures

Eurocode 2: Design of concrete structures – Part 1-2: General – Structural fire design

Eurocode 2: Design of concrete structures – Part 2: Bridges

Eurocode 2: Design of concrete structures – Part 3: Liquid retaining and containment structures

Eurocode 2 packages

2/1 Design of concrete building and civil engineering structures (excluding bridges and liquid retaining and containment structures)

2/2 Design of concrete bridges

2/3 Design of concrete liquid-retaining and containment structures

3 – 강철

Eurocode 3: Design of steel structures – Part 1-1: General rules and rules for buildings

Eurocode 3: Design of steel structures – Part 1-2: General – Structural fire design

Eurocode 3: Design of steel structures – Part 1-3: General – Cold formed thin gauge members and sheeting

Eurocode 3: Design of steel structures – Part 1-4: General – Structures in stainless steel

Eurocode 3: Design of steel structures – Part 1-5: General – Strength and stability of planar plated structures without transverse loading

Eurocode 3: Design of steel structures – Part 1-6: General – Strength and stability of shell structures

Eurocode 3: Design of steel structures – Part 1-7: General – Design values for plated structures subjected to out of plane loading

Eurocode 3: Design of steel structures – Part 1-8: General – Design of joints

Eurocode 3: Design of steel structures – Part 1-9: General – Fatigue strength

Eurocode 3: Design of steel structures – Part 1-10: General – Material toughness and through thickness assessment

Eurocode 3: Design of steel structures – Part 1-11: General – Design of structures with tension components

Eurocode 3: Design of steel structures – Part 1-12: General – Supplementary rules for high strength steels

Eurocode 3: Design of steel structures – Part 2-1: Bridges

Eurocode 3: Design of steel structures – Part 3-1 Towers, masts and chimneys – Towers and masts

Eurocode 3: Design of steel structures – Part 3-2: Towers, masts and chimneys – Chimneys

Eurocode 3: Design of steel structures – Part 4-1: Silos, tanks and pipelines – Silos

Eurocode 3: Design of steel structures – Part 4-2: Silos, tanks and pipelines – Tanks

Eurocode 3: Design of steel structures – Part 4-3: Silos, tanks and pipelines – Pipelines

Eurocode 3: Design of steel structures – Part 5: Piling

Eurocode 3: Design of steel structures – Part 6: Crane supporting structures

Eurocode 3 packages

3/1 Design of steel building and civil engineering structures (excluding bridges, silos, tanks and pipelines, steel piling, crane supporting structures, and towers and masts)

3/2 Design of steel bridges

3/3 Design of steel silos, tanks and pipelines

3/4 Design of steel piling

3/5 Design of steel crane-supporting structures

3/6 Design of steel towers and masts

4 – Composite

Eurocode 4: Design of composite steel and concrete structures – Part 1-1: General – Common rules and rules for buildings

Eurocode 4: Design of composite steel and concrete structures – Part 1-2: General – Structural fire design

Eurocode 4: Design of composite steel and concrete structures – Part 2: Bridges

Eurocode 4 packages

4/1 Design of composite steel and concrete building and civil engineering structures (excluding bridges)

4/2 Design of composite steel and concrete bridges

5 – Timber

Eurocode 5: Design of timber structures – Part 1-1: General – Common rules and rules for buildings

Eurocode 5: Design of timber structures – Part 1-2: General – Structural fire design

Eurocode 5: Design of timber structures – Part 2: Bridges

Eurocode 5 packages

5/1 Design of timber buildings and civil engineering structures (excluding bridges)

5/2 Design of timber bridges

6 – Masonry

Eurocode 6: Design of masonry structures – Part 1-1: General – Rules for reinforced and unreinforced masonry, including lateral loading

Eurocode 6: Design of masonry structures – Part 1-2: General – Structural fire design

Eurocode 6: Design of masonry structures – Part 2: Selection and execution of masonry

Eurocode 6: Design of masonry structures – Part 3: Simplified calculation methods for masonry structures

Eurocode 6 packages

6 Design of masonry building and civil engineering structures (excluding bridges)

7 – Geo​-​technical

Eurocode 7: Geotechnical design – Part 1: General rules

Eurocode 7: Geotechnical design – Part 2: Ground investigation and testing

8 – Earthquake

Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules seismic actions and rules for buildings

Eurocode 8: Design of structures for earthquake resistance – Part 2: Bridges

Eurocode 8: Design of structures for earthquake resistance – Part 3: Strengthening and repair of buildings

Eurocode 8: Design of structures for earthquake resistance – Part 4: Silos, tanks and pipelines

Eurocode 8: Design of structures for earthquake resistance – Part 5: Foundations, retaining structures and geotechnical aspects

Eurocode 8: Design of structures for earthquake resistance – Part 6: Towers, masts and chimneys

9 – Aluminium​

Eurocode 9: Design of aluminium structures – Part 1-1: General – Common rules

Eurocode 9: Design of aluminium structures – Part 1-2: General – Structural fire design

Eurocode 9: Design of aluminium structures – Part 1-3: Additional rules for structures susceptible to fatigue

Eurocode 9: Design of aluminium structures – Part 1-4: Supplementary rules for trapezoidal sheeting

Eurocode 9: Design of aluminium structures – Part 1-5: Supplementary rules for shell structures

Eurocode 9 packages

9 Design of all aluminium structures