Standards for UFGS U.S. Military Construction
평택 미군 기지 건설 관련 규격 및 표준 목록
ACOUSTICAL SOCIETY OF AMERICA (ASA)
ASA S1.11 (2004; Errata 2005; R 2009) Specification for Octave- Band and Fractional-Octave-Band Analog and Digital Filters (ASA 65)
ASA S1.13 (2005; R 2010) Methods for the Measurement of Sound Pressure Levels in Air (ASA 118)
ASA S1.4 (1983; Amendment 1985; R 2006) Specification for Sound Level Meters (ASA 47)
ASA S12.11/Part 1 (2013) Acoustics-Measurement of Noise and Vibration of Small Air-Moving Devices, Part 1: Airborne Noise Emission
ASA S12.11/Part 2 (2013) Acoustics-Measurement of Noise and Vibration of Small Air-Moving Devices, Part 2: Structure-borne Vibration
ASA S12.23 (1989; R 2011) Method for the Designation of Sound Power Emitted by Machinery and Equipment
ASA S12.30 (1990; R 2002) Standard Guidelines for the Use of Sound Power Standards and for the Preparation of Noise Test Codes
ASA S12.51 (2012) Acoustics Determination of Sound Power Levels of Noise Sources using Sound Pressure Precision Method for Reverberation Rooms
ASA S12.53/1 (2011) Acoustics- Determination of Sound Power Levels of Noise Sources – Engineering Methods for Small, Movable Sources in Reverberant Fields – Part1: Comparison Method for Hard-Walled Test Rooms
ASA S12.53/2 (1999; R 2009) Acoustics- Determination of Sound Power Levels of Noise Sources Using Sound Pressure – Engineering Methods for Small, Movable Sources in Reverberant Fields – Part2: Methods for Special Reverberation Test Rooms
ASA S12.54 (2011) Acoustics – Determination of Sound Power Levels of Noise Sources Using Sound Pressure – Engineering Method in an Essentially Free Field over a Reflecting Plane
ASA S2.19 (1999; R 2004) Mechanical Vibration – Balance Quality Requirements of Rigid Rotors, Part 1: Determination of Permissible Residual Unbalance, Including Marine Applications
ASA S2.40 (1984; R 2001) Mechanical Vibration of Rotating and Reciprocating Machinery – Requirements for Instruments for Measuring Vibration Severity
ASA S2.71 (1983; R 2006) Guide to the Evaluation of Human Page 1 Exposure to Vibration in Buildings
ASA S3.1 (1999; R 2013) Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms (ASA 99)
ASA S3.2 (2009) Method for Measuring the Intelligibility of Speech Over Communication Systems (ASA 85)
ASA S3.41 (1990; R 2008) Audible Emergency Evacuation Signal (ASA 96)AIR CONDITIONING CONTRACTORS OF AMERICA (ACCA)
ACCA Manual 4 (2001) Installation Techniques for Perimeter Heating and Cooling; 11th Edition AIR DIFFUSION COUNCIL (ADC)
ADC Standards Manual (2008; 5th Edition) Flexible Duct Performance Installation Standards AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL (AMCA)
AMCA 201 (2002; R 2011) Fans and Systems
AMCA 203 (1990; R 2011) Field Performance Measurements of Fan Systems
AMCA 204 (2005; R 2012) Balance Quality and Vibration Levels for Fans
AMCA 210 (2007) Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
AMCA 211 (2005; Rev 6 2012) Certified Ratings Programme – Product Rating Manual for Air Fan Performance
AMCA 220 (2005) Test Methods for Air Curtain Units
AMCA 300 (2008) Reverberant Room Method for Sound Testing of Fans
AMCA 301 (1990; INT 2007) Methods for Calculating Fan Sound Ratings from Laboratory Test Data
AMCA 500-D (2012) Laboratory Methods of Testing Dampers for Rating
AMCA 500-L (2012) Laboratory Methods of Testing Louvers for Rating
AMCA 511 (2013) Certified Ratings Program for Air Control Devices
AMCA 801 (2001; R 2008) Industrial Process/Power Generation Fans: Specification Guidelines
AMCA 802 (2002; R 2008) Industrial Process/Power Generation Fans: stablishing Performance Using Laboratory Models
AMCA 99 (2010) Standards Handbook
AMCA 99-0401 (1986) Classifications for Spark Resistant Construction
AMCA Licensed Products (Online) Directory of Products Licensed Under the AMCA International Certified Ratings Program AIR-CONDITIONING, HEATING AND REFRIGERATION INSTITUTE (AHRI)
AHRI 1010 (2002) Self-Contained, Mechanically Refrigerated Drinking-Water Coolers
AHRI 1060 I-P (2011) Performance Rating of Air-to-Air Heat Exchangers for Energy Recovery Ventilation Heat Equipment
AHRI 260 I-P (2012) Sound Rating of Ducted Air Moving and Conditioning Equipment
AHRI 320 (1998) Water-Source Heat Pumps
AHRI 325 (1998) Ground Water-Source Heat Pumps
AHRI 350 (2008) Sound Rating of Non-Ducted Indoor Air-Conditioning Equipment
AHRI 365 (2009) Commercial and Industrial Unitary Air-Conditioning Condensing Units
AHRI 366 (2009) Commercial and Industrial Unitary Air-Conditioning Condensing Units
AHRI 410 (2001; Addendum 1 2002; Addendum 2 2005; Addendum 3 2011) Forced-Circulation Air-Cooling and Air-Heating Coils
AHRI 420 (2008) Performance Rating of Forced-Circulation Free-Delivery Unit Coolers for Refrigeration
AHRI 430 (2009) Central-Station Air-Handling Units
AHRI 440 (2008) Room Fan-Coils and Unit Ventilators
AHRI 450 (2007) Water-Cooled Refrigerant Condensers, Remote Type
AHRI 480 (2007) Refrigerant-Cooled Liquid Coolers, Remote Type
AHRI 490 I-P (2011) Performance Rating of Remote Mechanical-Draft Evaporatively-Cooled Refrigerant Condensers
AHRI 540 (2004) Performance Rating Of Positive Displacement Refrigerant Compressors And Compressor Units
AHRI 550/590 (2003) Performance Rating of Water-Chilling Packages Using the Vapor Compression Cycle
AHRI 550/590 I-P (2011) Performance Rating Of Water-Chilling and Heat Pump Water-Heating Packages Using the Vapor Compression Cycle
AHRI 575 (2008) Method of Measuring Machinery Sound Within an Equipment Space
AHRI 700 (2012; Add 1 2013) Specifications for Fluorocarbon Refrigerants
AHRI 710 I-P (2009) Performance Rating of Liquid-Line Driers
AHRI 711 (2009) Performance Rating of Liquid-Line Driers
AHRI 720 (2002) Refrigerant Access Valves and Hose Connectors
AHRI 740 (1998) Refrigerant Recovery/Recycling Equipment
AHRI 880 I-P (2011) Performance Rating of Air Terminals
AHRI 885 (2008; Addendum 2011) Procedure for Estimating Occupied Space Sound Levels in the Application of Air Terminals and Air Outlets
AHRI DCAACP (Online) Directory of Certified Applied Air-Conditioning Products
AHRI DCUP (Online) Directory of Certified Unitary Products
AHRI Guideline D (1996) Application and Installation of Central Station Air-Handling Units
AHRI Guideline K (2009) Guideline for Containers for Recovered Non-Flammable Fluorocarbon Refrigerants
ANSI/AHRI 210/240 (2008; Add 1 2011; Add 2 2012) Performance Rating of Unitary Air-Conditioning & Air-Source Heat Pump Equipment
ANSI/AHRI 270 (2008) Sound Rating of Outdoor Unitary Equipment
ANSI/AHRI 340/360 (2007) Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment
ANSI/AHRI 370 (2011) Sound Rating of Large Outdoor Refrigerating and Air-Conditioning Equipment
ANSI/AHRI 460 (2005) Performance Rating of Remote Mechanical-Draft Air-Cooled Refrigerant Condensers
ANSI/AHRI 495 (2005) Performance Rating of Refrigerant Liquid Receivers
ANSI/AHRI 510 (2006) Performance Rating of Positive Displacement Ammonia Compressors and Compressor Units
ANSI/AHRI 520 (2004) Performance Rating of Positive Displacement Condensing Units
ANSI/AHRI 560 (2000) Absorption Water Chilling and Water Heating Packages
ANSI/AHRI 620 (2004) Performance Rating of Self-Contained Humidifiers for Residential Applications
ANSI/AHRI 640 (2005) Performance Rating of Commercial and Industrial Humidifiers
ANSI/AHRI 750 (2007) Thermostatic Refrigerant Expansion Valves
ANSI/AHRI 760 (2007) Performance Rating of Solenoid Valves for Use With Volatile Refrigerants
ANSI/AHRI 850 (2004) Performance Rating of Commercial and Industrial Air Filter Equipment
ANSI/AHRI/CSA 310/380 (2004) Standard for Packaged Terminal Air-Conditioners and Heat Pumps
ALLIANCE FOR TELECOMMUNICATIONS INDUSTRY SOLUTIONS (ATIS)
ATIS ANSI O5.1 (2008) Wood Poles — Specifications & Dimensions ALUMINUM ASSOCIATION (AA)
AA ADM (2010) Aluminum Design Manual
AA ASD1 (2013) Aluminum Standards and Data
AA ASM-35 (2000) Specifications for Aluminum Sheet Metal Work in Building Construction, Construction Manual Series Section 5
AA DAF45 (2003; Reaffirmed 2009) Designation System for Aluminum Finishes
AA H35.1/35.1M (2009) ANS Alloy & Temper Designation Systems for Aluminum
AA H35.2 (2009) ANS Dimensional Tolerances for Aluminum Mill Products
AA H35.2M (2009) ANS Dimensional Tolerances for Aluminum Mill Products
AA PK-1 (2009) Pink Sheets: Designations and Chemical Composition Limits for Aluminum Alloys in the Form of Castings & Ingot
AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)
AAMA 1002-11 (2011) Voluntary Specification for Secondary Storm Products for Windows and Sliding Glass Doors
AAMA 1302.5 (1976) Voluntary Specifications for Forced-Entry Resistant Aluminum Prime Windows
AAMA 1503 (2009) Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections
AAMA 2603 (2002) Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels
AAMA 2604 (2010) Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels
AAMA 2605 (2011) Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusion and Panels
AAMA 501 (2005) Methods of Test for Exterior Walls
AAMA 501.1 (2005) Standard Test Method for Water Penetration of Windows, Curtain Walls and Doors Using Dynamic Pressure
AAMA 501.4 & 501.6 (2009) Recommended Static Test Method for Evaluating Curtain Wall and Storefront Systems Subjected to Seismic and Wind Induced Interstory Drifts & Recommended Dynamic Test Method for Determining the Seismic Drift Causing Glass Fallout from a Wall System
AAMA 503 (2008) Voluntary Specification for Field Testing of Newly Installed Storefronts, Curtain Walls and Sloped Glazing Systems
AAMA 609 & 610 (2009) Cleaning and Maintenance Guide for Architecturally Finished Aluminum
AAMA 611 (1998; R 2004) Voluntary Specification for Anodized Architectural Aluminum
AAMA 701/702 (2004) Voluntary Specification for Pile Weatherstripping and Replaceable Fenestration Weatherseals
AAMA 800 (2010) Voluntary Specifications and Test Methods for Sealants
AAMA 902 (1992; R 1999; R 2007) Voluntary Specification for Sash Balances
AAMA CW-10 (2004) Care and Handling of Architectural Aluminum from Shop to Site
AAMA MCWM-1 (1989) Metal Curtain Wall Manual
AAMA WSG.1 (1995) Window Selection Guide
AAMA/WDMA/CSA 101/I.S.2/A(4240011) Standard/Specification for Windows,Doors, and Skylights
AMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATION OFFICIALS (AASHTO)
AASHTO GDHS-5 (2011, Errata 2012) A Policy on Geometric Design of Highways and Streets
AASHTO HB-17 (2002; Errata 2003; Errata 2005, 17th Edition)Standard Specifications for Highway Bridges
AASHTO LTS (2013; Errata 2013) Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals
AASHTO M 118 (1979) Coal-Tar Bitumen Used in Roofing, Damp-Proofing, and Waterproofing
AASHTO M 133 (2012) Standard Specification for Preservatives and Pressure Treatment Processes for Timber
AASHTO M 140 (2013) Standard Specification for Emulsified Asphalt
AASHTO M 145 (1991; R 2008) Standard Specification for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
AASHTO M 147 (1965; R 2008) Standard Specification for Materials for Aggregate and Soil-Aggregate Subbase, Base, and Surface Courses
AASHTO M 156 (2013) Standard Specification for Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
AASHTO M 167M/M 167 (2009) Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
AASHTO M 180 (2012) Standard Specification for Corrugated Sheet Steel Beams for Highway Guardrail
AASHTO M 182 (2005; R 2009) Standard Specification for Burlap Cloth Made from Jute or Kenaf and Cotton Mats
AASHTO M 190 (2004; R 2012) Standard Specification for Bituminous Coated Corrugated Metal Culvert Pipe and Pipe Arches
AASHTO M 198 (2010) Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
AASHTO M 200 (1973; R 2012) Standard Specification for Epoxy Protective Coatings
AASHTO M 208 (2001; R 2009) Standard Specification for Cationic Emulsified Asphalt
AASHTO M 216 (2013) Standard Specification for Lime for Soil Stabilization
AASHTO M 219 (1992; R 2012) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
AASHTO M 226 (1980; R 2008) Standard Specification for Viscosity-Graded Asphalt Cement
AASHTO M 243 (1996; R 2012) Standard Specification for Field-Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches
AASHTO M 247 (2013) Standard Specification for Glass Beads Used in Pavement Markings
AASHTO M 252 (2009) Standard Specification for Corrugated Polyethylene Drainage Pipe
AASHTO M 288 (2006; R 2011) Standard Specification for Geotextile Specification for Highway Applications
AASHTO M 294 (2013) Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter
AASHTO M 300 (2003; R 2012) Standard Specification for Inorganic Zinc-Rich Primer
AASHTO M 314 (1990; R 2008) Standard Specification for Steel Anchor Bolts
AASHTO M 320 (2010) Standard Specification for Performance-Graded Asphalt Binder
AASHTO M 325 (2008) Standard Specification for Stone Matrix Asphalt (SMA)
AASHTO M 43 (2005; R 2009) Standard Specification for Sizes of Aggregate for Road and Bridge Construction
AASHTO M 81 (1992; R 2008) Standard Specification for Cutback Asphalt (Rapid-Curing Type)
AASHTO M 82 (1975; R 2008) Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO R 46 (2008) Standard Practice for Designing Stone Matrix Asphalt (SMA)
AASHTO RSDG-4 (2011; Errata 2012) Roadside Design Guide
AASHTO SDDP-1-OL (2003) Shop Detail Drawing Presentation Guidelines
AASHTO T 102 (2009) Standard Method of Test for Spot Test of Asphaltic Materials
AASHTO T 11 (2005; R 2009) Standard Method of Test for Materials Finer Than 75 Micrometer (No. 200) Sieve in Mineral Aggregates by Washing
AASHTO T 111 (2011) Standard Method of Test for Mineral Matter or Ash in Asphalt Materials
AASHTO T 134 (2005; R 2009) Standard Method of Test for Moisture-Density Relations of Soil-Cement Mixtures
AASHTO T 135 (2013) Standard Method of Test for Wetting-and-Drying Test of Compacted Soil-Cement Mixtures
AASHTO T 136 (1997; R 2009) Standard Method of Test for Freezing-and-Thawing Tests of Compacted Soil-Cement Mixtures
AASHTO T 180 (2010) Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 193 (2013) Standard Method of Test for The California Bearing Ratio
AASHTO T 219 (1987; R 2008) Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes
AASHTO T 224 (2010) Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
AASHTO T 230 (1968; R 2000) Determining Degree of Pavement Compaction of Bituminous Aggregate Mixtures
AASHTO T 259 (2002; R 2012) Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration
AASHTO T 260 (1997; R 2011) Standard Method of Test for Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials
AASHTO T 27 (2011) Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates
AASHTO T 30 (2013) Standard Method of Test for Mechanical Analysis of Extracted Aggregate
AASHTO T 308 (2010) Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
AASHTO T 312 (2012) Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
AASHTO T 326 (2005; R 2009) Standard Method of Test for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape, Surface Texture, and Grading)
AASHTO T 329 (2013) Standard Test Method for Moisture Content of Hot Mix Asphalt (HMA) by Oven Method
AASHTO T 334 (2008) Standard Method of Test for Estimating the Cracking Tendency of Concrete
AASHTO T 40 (2002; R 2006) Sampling Bituminous Materials
AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)
AATCC 107 (2013) Colorfastness to Water
AATCC 127 (2013) Water Resistance: Hydrostatic Pressure Test
AATCC 134 (2011; E 2013) Electrostatic Propensity of Carpets
AATCC 16 (2004; E 2010) Colorfastness to Light
AATCC 165 (2013) Colorfastness to Crocking: Textile Floor Coverings – Crockmeter Method
AATCC 174 (2011) Antimicrobial Activity Assessment of Carpets AMERICAN BEARING MANUFACTURERS ASSOCIATION (ABMA)
ABMA 11 (1990; R 2008) Load Ratings and Fatigue Life for Roller Bearings
ABMA 7 (1995; Stabilized (S) 2013) Shaft and Housing Fits for Metric Radial Ball and Roller Bearings (Except Tapered Roller Bearings) Conforming to Basic Boundary Plan
ABMA 9 (1990; ERTA 2012; S 2013) Load Ratings and Fatigue Life for Ball Bearings
AMERICAN BOILER MANUFACTURERS ASSOCIATION (ABMA/BOIL)
ABMA Boiler 103 (2001) Selected Codes and Standards of the Boiler Industry
ABMA Boiler 203 (2002) A Guide to Clean and Efficient Operation of Coal-Stoker-Fired Boilers
ABMA Boiler 402 (2005) Boiler Water Quality Requirements and Associated Steam Quality for Industrial/Commercial and Institutional Boilers
AMERICAN BUREAU OF SHIPPING (ABS)
ABS 2 (2014; E 2014; CORR 2014) Rules for Building and Classing Steel Vessels
AMERICAN CONCRETE INSTITUTE INTERNATIONAL (ACI)
ACI 117 (2010; Errata 2011) Specifications for Tolerances for Concrete Construction and Materials and Commentary
ACI 121R (2008) Guide for Concrete Construction Quality Systems in Conformance with ISO 9001
ACI 201.1R (2008) Guide for Conducting a Visual Inspection of Concrete in Service
ACI 201.2R (2008) Guide to Durable Concrete
ACI 211.1 (1991; R 2009) Standard Practice for Selecting Proportions for Normal, Heavyweight and Mass Concrete
ACI 211.2 (1998; R 2004) Standard Practice for Selecting Proportions for Structural Lightweight Concrete
ACI 211.3R (2002; R 2009) Guide for Selecting Proportions for No-Slump Concrete
ACI 211.5R (2001; R 2009) Guide for Submittal of Concrete Proportions
ACI 212.3R (2010) Chemical Admixtures for Concrete
ACI 213R (2003) Guide for Structural Lightweight-Aggregate Concrete
ACI 214R (2011) Evaluation of Strength Test Results of Concrete
ACI 224.1R (2007) Causes, Evaluation, and Repair of Cracks in Concrete Structures
ACI 301 (2010; Errata 2011) Specifications for Structural Concrete
ACI 301M (2010) Metric Specifications for Structural Concrete
ACI 302.1R (2004; Errata 2006; Errata 2007) Guide for Concrete Floor and Slab Construction
ACI 303R (2012) Guide to Cast-In-Place ArchitecturalConcrete Practice
ACI 304.2R (1996; R 2008) Placing Concrete by Pumping Methods
ACI 304R (2000; R 2009) Guide for Measuring, Mixing, Transporting, and Placing Concrete
ACI 305.1 (2006) Specification for Hot Weather Concreting
ACI 305R (2010) Guide to Hot Weather Concreting
ACI 306.1 (1990; R 2002) Standard Specification for Cold Weather Concreting
ACI 306R (2010) Guide to Cold Weather Concreting
ACI 308.1 (2011) Specification for Curing Concrete
ACI 308R (2001; R 2008) Guide to Curing Concrete
ACI 309R (2005) Guide for Consolidation of Concrete
ACI 311.4R (2005) Guide for Concrete Inspection
ACI 318 (2011; Errata 1 2011; Errata 2 2012; Errata 3-4 2013) Building Code Requirements for Structural Concrete and Commentary
ACI 318M (2011; Errata 2013) Building Code Requirements for Structural Concrete & Commentary
ACI 325.12R (2002) Guide for Design of Jointed Concrete Pavements for Streets and Local Roads
ACI 330R (2008) Guide for the Design and Construction of Concrete Parking Lots
ACI 336.1 (2001) Specification for the Construction of Drilled Piers
ACI 346 (2009) Specification for Cast-in-Place Concrete Pipe
ACI 347 (2004; Errata 2008; Errata 2012) Guide to Formwork for Concrete
ACI 364.1R (2007) Guide for Evaluation of Concrete Structures Before Rehabilitation
ACI 364.3R (2009) Guide for Cementitious Repair Material Data Sheet
ACI 437R (2003) Strength Evaluation of Existing Concrete Buildings
ACI 440.2R (2008; Errata 2009; Errata 2010) Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures
ACI 440.3R (2012) Guide Test Methods for Fiber-Reinforced Polymer (FRP) for Reinforcing or Strengthening Concrete Structures
ACI 503.1-503.4 (1992, R 2003) Four Epoxy Specifications
ACI 506.2 (2013) Specification for Materials, Proportioning,and Application of Shotcrete
ACI 522.1 (2013) Specification For Pervious Concrete Pavement
ACI 523.4R (2009) Guide for Design and Construction with Autoclaved Aerated Concrete Panels
ACI 530/530.1 (2011; Errata 2011; Errata 2013) Building Code Requirements and Specification for Masonry Structures and Related Commentaries
ACI 548.4 (2011) Standard Specification for Latex-Modified Concrete (LMC) Overlays
ACI 551.1R (2005) Tilt-up Concrete Construction Guide
ACI C-10 (1990) Repair and Rehabilitation of Concrete Structures
ACI C-20 (1992) Repair and Rehabilitation II
ACI C-21 (1992) Elevated Slabs
ACI CP-50 (2007) Tilt-Up Supervisor & Technician Reference Guide
ACI CP-60 (2009) Craftman Workbook for ACI Certification of Shotcrete Nozzleman
ACI MCP SET (2013) Manual of Concrete Practice
ACI SP-15 (2011) Field Reference Manual: Standard Specifications for Structural Concrete ACI 301-05 with Selected ACI References
ACI SP-2 (2007; Abstract: 10th Edition) ACI Manual of Concrete Inspection
ACI SP-66 (2004) ACI Detailing Manual
ACI/MCP-2 (2013) Manual of Concrete Practice Part 2
ACI/MCP-3 (2013) Manual of Concrete Practice Part 3
ACI/MCP-4 (2013) Manual of Concrete Practice Part 4
AMERICAN CONCRETE PIPE ASSOCIATION (ACPA)
ACPA 01-102 (2000) Concrete Pipe Handbook
ACPA 01-103 (2000) Concrete Pipe Installation Manual
ACPA 01-110 (1984) Design Manual for Sulfide and Corrosion Prediction and Control
ACPA QPC (2005; Ver 3.0) QCast Plant Certification Manual
AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS (ACGIH)
ACGIH 0100 (2001; Supplements 2002-2008) Documentation of the Threshold Limit Values and Biological Exposure Indices
ACGIH 0112 (2011) TLVs and BEIs
ACGIH-2092M (2004) Industrial Ventilation: A Manual of Recommended Practice(Metric)
ACGIH-2092S (2004) Industrial Ventilation: A Manual of Recommended Practice
ACGIH-2097 (2013) Industrial Ventilation: A Manual of Recommended Practice for Design
AMERICAN FOREST & PAPER ASSOCIATION (AF&PA)
AF&PA T101 (2005) National Design Specification (NDS) for Wood Construction
AMERICAN GAS ASSOCIATION (AGA)
AGA ANSI B109.1 (2000) Diaphragm-Type Gas Displacement Meters (Under 500 cubic ft./hour Capacity)
AGA ANSI B109.2 (2000) Diaphragm-Type Gas Displacement Meters (500 cubic ft./hour Capacity and Over)
AGA ANSI B109.3 (2000) Rotary-Type Gas Displacement Meters
AGA GMC Gas Measurement Committee Report No. 3
AGA Report No 3 (2000; 4th Ed) Orifice Metering of Natural Gas; PART 2: Specification and Installation Requirements
AGA XR0603 (2006; 8th Ed) AGA Plastic Pipe Manual for Gas Service
AGA Z223.1 (2012) National Fuel Gas Code
AMERICAN GEAR MANUFACTURERS ASSOCIATION (AGMA)
AGMA 2015/915-1 (2002A) Accuracy Classification System – Tangential Measurement Tolerance Tables for Cylindrical Gears
AGMA 908 (1989B; R 1999) Information Sheet: Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth
AGMA ISO 10064-6 (2010A) Code of Inspection Practice – Part 6: Bevel Gear Measurement Methods
AGMA ISO 17485 (2008A; Supplement 2008) Bevel Gears – ISO System of Accuracy (Including Supplement – Tolerance Tables 2008)
ANSI/AGMA 2001 (2004D; R 2010) Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
ANSI/AGMA 2003 (2010D) Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, ZEROL Bevel, and Spiral Bevel Gear Teeth
ANSI/AGMA 2004 (2008C) Gear Materials, Heat Treatment and Processing Manual
ANSI/AGMA 2005 (2003D; R 2008) Design Manual for Bevel Gears
ANSI/AGMA 2009 (2001B; R 2008) Bevel Gear Classification, Tolerances, and Inspection Methods
ANSI/AGMA 2011 (1998A; R 2004) Cylindrical Wormgearing Tolerance and Inspection Methods
ANSI/AGMA 2015-1 (2001A; R 2008) Accuracy Classification System – Tangential Measurements for Cylindrical Gears
ANSI/AGMA 6001 (2008E) Design and Selection of Components for Enclosed Gear Drives
ANSI/AGMA 6011 (2003I; R 2008) Specifications for High Speed Helical Gear Units
ANSI/AGMA 6013 (2006A; R 2011) Standard for Industrial Enclosed Gear Drives
ANSI/AGMA 6025 (1998D; R 2010) Sound for Enclosed Helical,Herringbone and Spiral Bevel Gear Drives
ANSI/AGMA 6034 (1992B; R 2005) Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors
ANSI/AGMA 6113 (2006A; R 2011) Standard for Industrial Enclosed Gear Drives (Metric Edition)
ANSI/AGMA 6123 (2006B) Design Manual for Enclosed Epicyclic Gear Drives
ANSI/AGMA 9000 (2011D) Flexible Couplings – Potential Unbalance Classification
ANSI/AGMA 9002 (2004B; R 2011) Bores and Keyways for Flexible Couplings (Inch Series)
ANSI/AGMA 9005 (2002E; R 2008) Industrial Gear Lubrication
AMERICAN HARDBOARD ASSOCIATION (AHA)
AHA A135.4 (1995; R 2004) Basic Hardboard
AHA A135.6 (1998; R 2006) Hardboard Siding
AMERICAN INDUSTRIAL HYGIENE ASSOCIATION (AIHA)
AIHA IMOM08-679 (2008) Recognition, Evaluation, and Control of Indoor Mold
AIHA Z88.6 (2006) Respiratory Protection – Respirator Use-Physical Qualifications for Personnel
AIHA Z9.3 (2007) Spray Finishing Operations – Safety Code for Design, Construction and Ventilation
AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)
AISC 201 (2006) AISC Certification Program for Structural Steel Fabricators
AISC 303 (2010) Code of Standard Practice for Steel Buildings and Bridges
AISC 325 (2011) Steel Construction Manual
AISC 326 (2009) Detailing for Steel Construction
AISC 341 (2010) Seismic Provisions for Structural Steel Buildings
AISC 360 (2010) Specification for Structural Steel Buildings
AISC DESIGN GUIDE 10 (1997) Erection Bracing of Low-Rise Structural Steel Buildings
AMERICAN INSTITUTE OF TIMBER CONSTRUCTION (AITC)
AITC 109 (2007) Standard for Preservative Treatment of Structural Glued Laminated Timber
AITC 110 (2001) Standard Appearance Grades for Structural Glued Laminated Timber
AITC 111 (2005) Recommended Practice for Protection of Structural Glued Laminated Timber During Transit, Storage and Erection
AITC 113 (2010) Standard for Dimensions of Structural Glued Laminated Timber
AITC 117 (2010) Standard Specifications for Structural Glued Laminated Timber of Softwood Species, Design and Manufacturing Requirements
AITC 119 (1996) Standard Specifications for Structural Glued Laminated Timber of Hardwood Species
AITC 200 (2009) Manufacturing Quality Control Systems Manual
AITC TCM (2004; Errata 2010) Timber Construction Manual, 5th Edition
ANSI/AITC A190.1 (2007) American National Standard, Structural Glued
Laminated Timber
AMERICAN IRON AND STEEL INSTITUTE (AISI)
AISC/AISI 121 (2004) Standard Definitions for Use in the Design of Steel Structures
AISI D100 (1991; R 2008) Cold-Formed Steel Design Manual
AISI E 1 (2011) Steel Plate Engineering Data Series – Design of Plate Structures, Volumes I & II
AISI S100 (2007; Supp 1: 2009; Supp 2: 2010) North American Specification for the Design of Cold-Formed Steel Structural Members
AISI S200 (2007) North American Standard for Cold-Formed Steel Framing – General Provision
AISI S201 (2007) North American Standard for Cold-Formed Steel Framing – Product Data
AISI S202 (2011) Code of Standard Practice for Cold-formed Steel Structural Framing
AISI S211 (2007) North American Standard for Cold-Formed Steel Framing – Wall Stud Design
AISI S212 (2007) North American Standard for Cold-Formed Steel Framing – Header Design
AISI S213 (2007; Suppl 1 2009) North American Standard for Cold-Formed Steel Framing – Lateral Design
AISI SG-971-Spec (1996; R 2001; Suppl 1) Specification and Commentary for the Design of Cold-Formed Steel Structural Members
AISI SG02-KIT (2001; Supp 1 2004) North American Specification for the Design of Cold-Formed Steel Structural Members
AISI SG03-3 (2002; Suppl 2001-2004; R 2008) Cold-Formed Steel Design Manual Set
AMERICAN LADDER INSTITUTE (ALI/LADDER)
ALI/LADDER A14.3 (2008) Standard for Fixed Ladders and Safety Requirements
AMERICAN LUMBER STANDARDS COMMITTEE (ALSC)
ALSC PS 20 (2010) American Softwood Lumber Standard
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI A108.11 (1992; Reaffirmed 2005) Specifications for Interior Installation of Cementitious Backer Units
ANSI A137.1 (2012) American National Standards Specifications for Ceramic Tile
ANSI A137.2 (2012) American National Standards Specifications for Glass Tile
ANSI A161.2 (1998) Decorative Laminate Countertops, Performance Standards for Fabricated High Pressure
ANSI A48.1 (1986) Concrete Construction – Forms for One Way Concrete Joist Construction
ANSI A48.2 (1986) Concrete Construction – Forms for Two Way Concrete Joist Construction
ANSI B11/STD B11.0 (2010) Safety of Machinery – General Requirements and Risk Assessment
ANSI B11/STD B11.19 (2010) Machines – Performance Criteria for Safeguarding
ANSI C12.15 (1990) Solid-State Demand Registers for Electromechanical Watthour Meters
ANSI C135.14 (1979) Staples with Rolled or Slash Points for Overhead Line Construction
ANSI C37.72 (1987) Standard for Manually-Operated Dead-Front Pad Mounted Switchgear with Load Interrupting Switches and Separable Connections for
Alternating-Current Systems
ANSI C39.1 (1981; R 1992) Requirements for Electrical Analog Indicating Instruments
ANSI C57.12.13 (1982) Conformance Requirements for Liquid-Filled Transformers
ANSI INCITS 154 (1988; R 2004) Office Machines and Supplies – Alphanumeric Machines – Keyboard Arrangement
ANSI Z21.1 (2010; Addenda A 2011; Addenda B 2012) Household Cooking Gas Appliances
ANSI Z21.10.1/CSA 4.1 (2009; Addenda A 2009; Addenda B 2011) Gas Water Heaters Vol. I, Storage Water Heaters with Input Ratings of 75,000 Btu Per Hour or Less
ANSI Z21.10.3/CSA 4.3 (2013) Gas Water Heaters Vol.III, Storage Water Heaters With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous
ANSI Z21.13/CSA 4.9 (2013) Gas-Fired Low Pressure Steam and Hot Water Boilers
ANSI Z21.15/CSA 9.1 (2013) Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves
ANSI Z21.18/CSA 6.3 (2007; Addenda A 2010; Addenda B 2012; R 2013) Gas Appliance Pressure Regulators
ANSI Z21.21/CSA 6.5 (2005; Addenda A 2010; Addenda B 2011) Automatic Valves for Gas Appliances
ANSI Z21.22/CSA 4.4 (1999; Addenda A 2000, Addenda B 2001; R 2004)Relief Valves for Hot Water Supply Systems
ANSI Z21.24/CSA 6.10 (2006; R 2011) Connectors for Gas Appliances
ANSI Z21.41/CSA 6.9 (2011) Quick-Disconnect Devices for Use with Gas Fuel Appliances
ANSI Z21.45 (1995) Flexible Connectors of Other Than All-Metal Construction for Gas Appliances
ANSI Z21.47/CSA 2.3 (2012) Gas-Fired Central Furnaces
ANSI Z21.66/CGA 6.14 (1996; R 2001) Automatic Vent Damper Devices for Use with Gas-Fired Appliances
ANSI Z21.69/CSA 6.16 (2009; Addenda A 2012) Connectors for Movable Gas Appliances
ANSI Z21.78/CSA 6.20 (2010) Standard Specification for Combination Gas Controls for Gas Appliances
ANSI Z21.80/CSA 6.22 (2011; Addenda A 2012) Line Pressure Regulators
ANSI Z21.86/CSA 2.32 (2008) Vented Gas-Fired Gravity Space Heating Appliances
ANSI Z400.1/Z129.1 (2010) Hazardous Industrial Chemicals – Material Safety Data Sheets – Preparation
ANSI Z83.19/CSA 2.35 (2009; Addenda A 2011) Gas-Fired High-Intensity Infrared Heaters
ANSI Z83.3 (1971; R 1995) Gas Utilization Equipment in Large Boilers
ANSI Z83.4/CSA 3.7 (2013) Non-Recirculating Direct Gas-Fired Industrial Air Heaters
ANSI Z83.8/CSA 2.6 (2013 American National Standard/CSA Standard for Gas Unit Heater, Gas Packaged Heaters, Gas Utility Heaters and Gas-Fired Duct Furnaces
ANSI Z97.1 (2009; Errata 2010) Safety Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test
ANSI/SPRI ES-1 (2003) Wind Design Standard for Edge Systems Used with Low Slope Roofing Systems
ASC/X9 X9.52 (1998) Triple Data Encryption Algorithm Modes of Operation
AMERICAN NURSERY & LANDSCAPE ASSOCIATION (ANLA)
ANSI/ANLA Z60.1 (2004) American Standard for Nursery Stock
AMERICAN PETROLEUM INSTITUTE (API)
API 570 (2009, 3rd Ed) Piping Inspection Code: In-Service Inspection, Rating, Repair, and Alteration of Piping Systems
API MPMS 2.2A (1995; R 2012) Measurement and Calibration of Upright Cylindrical Tanks by the Manual Strapping Method
API MPMS 2.2B (1989; R 2007) Manual of Petroleum Measurement Standards Chapter 2: Tank Calibration – Section 2B: Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method
API MPMS 2.2C (2002; R 2008) Manual of Petroleum Measurement Standards Chapter 2: Tank Calibration – Section 2C: Calibration of Upright Cylindrical Tanks Using the Optical Triangulation Method
API MPMS 2.2D (2003; R 2009) Manual of Petroleum Measurement Standards Chapter 2: Tank Calibration – Section 2D: Calibration of Upright Cylindrical Tanks Using the Internal Electro-Optical Distance Ranging Method
API MPMS 2.2E (2004; Errata 2009; R 2009) Petroleum and Liquid Petroleum Products – Calibration of Horizontal Cylindrical Tanks – Part 1: Manual Methods
API PUBL 1628 (1996) A Guide to the Assessment and Remediation of Underground Petroleum Releases
API RP 1110 (2013) Pressure Testing of Steel Pipelines for the Transportation of Gas, Petroleum Gas, Hazardous Liquids, Highly Volatile Liquids or Carbon Dioxide
API RP 1130 (2007) Computational Pipeline Monitoring for Liquid Pipelines
API RP 13B-1 (2009; 4th Ed) Recommended Practice for Field Testing Water-Based Drilling Fluids
API RP 1604 (1996; R 2010) Closure of Underground Petroleum Storage Tanks
API RP 1615 (2011) Installation of Underground Petroleum Storage Systems
API RP 2003 (2008; 7th Ed) Protection Against Ignitions Arising out of Static, Lightning, and Stray Currents
API RP 2009 (2002; R 2007; 7th Ed) Safe Welding, Cutting, and Hot Work Practices in Refineries, Gasoline Plants, and Petrochemical Plants
API RP 2219 (2005; R 2012) Safe Operation of Vacuum Trucks in Petroleum Service
API RP 500 (2012; Errata 2014) Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division and Division 2
API RP 540 (1999; R 2004) Electrical Installations in
Petroleum Processing Plants
API RP 582 (2009) Welding Guidelines for the Chemical, Oil, and Gas Industries
API RP 686 (2009) Recommended Practice for Machinery Installation and Installation Design
API STD 2217A (2009) Guidelines for Safe Work in Inert Confined Spaces in the Petroleum and Petrochemical Industries
API STD 600 (2009; Errata 2009) Steel Gate Valves-Flanged and Butt-welding Ends, Bolted Bonnets
API STD 608 (2012) Metal Ball Valves – Flanged, Threaded, And Welding End
API STD 682 (2004; Errata 2006) Pumps Shaft Sealing Systems For Centrifugal and Rotary Pumps
API Spec 13A (2010) Specification for Drilling-Fluid Materials
API Spec 15LR (2001; R 2008) Specification for Low Pressure Fiberglass Line Pipe and Fittings
API Spec 5CT (2011; Errata 2012) Specification for Casing and Tubing
API Spec 5L (2012) Specification for Line Pipe
API Spec 6D (2008; Errata 1 2008; Errata 2 2008; Errata 3 2009; Addendum 1 2009; Errata 4 2010; Errata 5 2010; Errata 6 2011; Addendum 2 2011; Addendum 3 2012 ) Specification for Pipeline Valves
API Spec 6FA (1999; R 2006; Errata 2006; Errata 2008; R 2011) Specification for Fire Test for Valves
API Std 1104 (2013) Welding of Pipeline and Related Facilities
API Std 1631 (2001; R 2010) Interior Lining and Periodic Inspection of Underground Storage Tanks
API Std 2000 (2009) Venting Atmospheric and Low-Pressure Storage Tanks
API Std 2015 (2001; R 2006) Safe Entry and Cleaning of Petroleum Storage Tanks
API Std 594 (2010) Check Valves: Flanged, Lug, Wafer and Butt-Welding
API Std 598 (2009) Valve Inspecting and Testing
API Std 607 (2010) Testing of Valves: Fire Test for Soft-Seated Quarter-Turn Valves
API Std 609 (2009) Butterfly Valves: Double Flanged, Lug-and-Wafer Type
API Std 610 (2010; Errata 2011) Centrifugal Pumps for Petroleum, Petrochemical, and Natural Gas Industries
API Std 618 (2007; Errata 2009; Errata 2010) Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services
API Std 619 (2010) Rotary-Type Positive Displacement Compressors for Petroleum, Petrochemical, and Natural Gas Industries
API Std 650 (2013; Errata 2013) Welded Tanks for Oil Storage
API Std 653 (2009; Addendum 1 2010; Addendum 2 2012; Addendum 3 2013) Tank Inspection, Repair, Alteration, and Reconstruction
API Std 672 (2004; Errata 2007; Errata 2010) Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services
AMERICAN RAILWAY ENGINEERING AND MAINTENANCE-OF-WAY ASSOCIATION (AREMA)
AREMA Eng Man (2012) Manual for Railway Engineering
AREMA Track Plans (2008) Portfolio of Trackwork Plans
AMERICAN SOCIETY FOR NONDESTRUCTIVE TESTING (ASNT)
ANSI/ASNT CP-189 (2011) ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel (ANSI/ASNT CP-105-2006)
ASNT CP-105 (2011) ASNT Standard Topical Outlines for Qualification of Nondestructive Testing Personnel – Item No. 2821
ASNT SNT-TC-1A (2011; Text Correction 2013) Recommended Practice for Personnel Qualification and Certification in Nondestructive Testing
ASNT SNT-TC-1A Q&A Bk A (2010) Supplement to Recommended Practice No. SNT-TC-1A (Q&A Book): Radiographic Testing Method
ASNT SNT-TC-1A Q&A Bk B (2007) Supplement to Recommended Practice SNT-TC-1A (Q&A Book): Magnetic Particle Method
ASNT SNT-TC-1A Q&A Bk C (2011; Text Correction 2011) Supplement to Recommended Practice No. SNT-TC-1A (Q&A Book): Ultrasonic Testing Method
ASNT SNT-TC-1A Q&A Bk D (2011; Text Correction 2011) Supplement to Recommended Practice No. SNT-TC-1A (Q&A Book): Liquid Penetrant Testing Method
AMERICAN SOCIETY FOR QUALITY (ASQ)
ANSI/ASQ Z1.4 (2008; R 2013) Sampling Procedures and Tables for Inspection by Attributes
AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)
ASCE 2-06 (2007) Measurement of Oxygen Transfer in Clean Water
ASCE 25-06 (2008) Earthquake-Activated Automatic Gas Shutoff Devices
ASCE 7 (2010; Errata 2011; Supp 1 2013) Minimum Design Loads for Buildings and Other Structures
ASCE Report No. 13 (1961) Filtering Materials for Sewage Treatment Plants
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING ENGINEERS (ASHRAE)
ANSI/ASHRAE 15 & 34 (2013) ANSI/ASHRAE Standard 15-Safety Standard for Refrigeration Systems and ANSI/ASHRAE Standard 34-Designation and Safety Classification of Refrigerants
ASHRAE 113 (2013) Method of Testing for Room Air Diffusion
ASHRAE 127 (2012) Method of Testing for Rating Computer and Data Processing Room Unitary Air-Conditioners
ASHRAE 130 (2008) Method of Testing for Rating Ducted Air Terminal Units
ASHRAE 135 (2012; Errata 1 2013; INT 1-7 2013; Errata 2 2013) BACnet—A Data Communication Protocol for Building Automation and Control Networks
ASHRAE 146 (2011) Method of Testing and Rating Pool Heaters
ASHRAE 17 (2008) Method of Testing Capacity of Thermostatic Refrigerant Expansion Valves
ASHRAE 189.1 (2011; Errata 1-2 2012; INT 1 2013; Errata 3-8 2013) Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings
ASHRAE 23 (2005) Methods of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Units
ASHRAE 23.1 (2010) Methods of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Units that Operate at Subcritical Temperatures of the Refrigerant
ASHRAE 33 (2000) Method of Testing Forced Circulation Air Cooling and Air Heating Coils
ASHRAE 51 (2007) Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 52.1 (1992; Interpretation 1 2007) Gravimetric and Dust-Spot Procedures for Testing Air-Cleaning Devices Used in General Ventilation for Removing Particulate Matter
ASHRAE 52.2 (2012; Errata 2013) Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
ASHRAE 55 (2010; Errata 2011; Addenda A 2011; Addenda B, C, D, E and F 2012; Errata 2012; Addenda G, H, I, J, K, L, M, N, O, P, Q and R ) Thermal Environmental Conditions for Human Occupancy
ASHRAE 62.1 (2010; Errata 2011; INT 3 2012; INT 4 2012; INT 5 2013) Ventilation for Acceptable Indoor Air Quality
ASHRAE 64 (2011) Methods of Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers
ASHRAE 68 (1997) Laboratory Method of Testing to Determine the Sound Power In a Duct
ASHRAE 70 (2006; R 2011) Method of Testing for Rating the Performance of Air Outlets and Inlets
ASHRAE 84 (2013; Addenda A 2013) Method of Testing Air-to-Air Heat Exchangers
ASHRAE 90.1 – IP (2010; Errata 1-4 2011; INT 1-12 2011; Addenda A, B, C, G, H, J, K, O, P, S, Y, Z, BZ, CG, CI and DS 2012; Errata 5-9 2012; INT 13-16 2012; Errata 10-12 2013; INT 17-18 2013) Energy Standard for Buildings
Except Low-Rise Residential Buildings
ASHRAE 90.1 – SI (2010; Errata 1-2 2011; INT 2-12 2011; Addenda A, B, C, G, H, J, K, O, P, S, Y, Z, BZ, CG, CI and DS 2012; Errata 3-9 2012; INT 13-16 2012; Errata 10-15 2013; INT 17 2013) Energy Standard for Buildings Except Low-Rise Residential Buildings
ASHRAE 90.2 (2007; Addendum B 2010) Energy Efficient Design of Low-Rise Residential Buildings
ASHRAE 93 (2010; Errata 2013) Methods of Testing to Determine the Thermal Performance of Solar Collectors
ASHRAE 96 (1980; R 1989) Methods of Testing to Determine the Thermal Performance of Unglazed Flat-Plate Liquid-Type Solar Collectors
ASHRAE EQUIP IP HDBK (2012) Handbook, HVAC Systems and Equipment (IP Edition)
ASHRAE EQUIP SI HDBK (2012) Handbook, HVAC Systems and Equipment (SI Edition)
ASHRAE FUN IP (2013) Fundamentals Handbook, I-P Edition
ASHRAE FUN SI (2013) Fundamentals Handbook, SI Edition
ASHRAE HVAC APP IP HDBK (2011) HVAC Applications Handbook, I-P Edition
ASHRAE HVAC APP SI HDBK (2011) HVAC Applications Handbook, SI Edition
ASHRAE Item 90376 (1997) Ground-Source Heat Pumps, Design of Geothermal Systems for Commercial and Institutional Buildings
ASHRAE RP-935 (1998) Protocol for Field Testing of Tall Buildings to Determine Envelope Air Leakage Rate
AMERICAN SOCIETY OF SAFETY ENGINEERS (ASSE/SAFE)
ASSE/SAFE A10.24 (2006) Roofing – Safety Requirements of Low-Sloped Roofs
ASSE/SAFE A10.3 (2013) Operations – Safety Requirements for Powder Actuated Fastening Systems
ASSE/SAFE A10.32 (2012) Fall Protection
ASSE/SAFE A10.34 (2001; R 2012) Protection of the Public on or Adjacent to Construction Sites
ASSE/SAFE A10.6 (2006) Safety Requirements for Demolition Operations
ASSE/SAFE A1264.1 (2007) Safety Requirements for Workplace Walking/Working Surfaces and Their Access; Workplace, Floor, Wall and Roof Openings; Stairs
and Guardrails Systems
ASSE/SAFE Z359.1 (2007) Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components
AMERICAN SOCIETY OF SANITARY ENGINEERING (ASSE)
ASSE 1001 (2008) Performance Requirements for Atmospheric Type Vacuum Breakers (ANSI approved 2009)
ASSE 1003 (2009) Performance Requirements for Water Pressure Reducing Valves for Domestic Water Distribution Systems – (ANSI approved 2010)
ASSE 1009 (1990) Performance Requirements for Commercial Food Waste Grinder Units
ASSE 1010 (2004) Performance Requirements for Water Hammer Arresters (ANSI approved 2004)
ASSE 1011 (2004; Errata 2004) Performance Requirements for Hose Connection Vacuum Breakers (ANSI approved 2004)
ASSE 1012 (2009) Performance Requirements for Backflow Preventer with an Intermediate Atmospheric Vent – (ANSI approved 2009)
ASSE 1013 (2011) Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Fire Protection Principle Backflow
Preventers – (ANSI approved 2010)
ASSE 1015 (2009) Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies – (ANSI approved 2010)
ASSE 1017 (2009) Performance Requirements for Temperature Actuated Mixing Valves for Hot Water Distribution Systems – (ANSI approved 2010)
ASSE 1018 (2001) Performance Requirements for Trap Seal Primer Valves – Potable Water Supplied (ANSI Approved 2002
ASSE 1019 (2011) Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type (ANSI Approved 2004)
ASSE 1020 (2004; Errata 2004; Errata 2004) Performance Requirements for Pressure Vacuum Breaker Assembly (ANSI Approved 2004)
ASSE 1037 (1990) Performance Requirements for Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures
ASSE 6000 SERIES (2012) Professional Qualification Standard for Medical Gas Systems Installers, Inspectors and Verifiers
ASSE Series 5000 (2009) Cross-Connection Control Professional Qualification Standard
ASSE Z9.2 (2012) Fundamentals Governing the Design and Operation of Local Exhaust Ventilation Systems
AMERICAN WATER WORKS ASSOCIATION (AWWA)
ANSI/AWWA C541 (2008) Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates
ANSI/AWWA C542 (2009) Electric Motor Actuators for Valves and Slide Gates
AWWA 10084 (2005) Standard Methods for the Examination of Water and Wastewater
AWWA A100 (2006; Errata 2007) Water Wells
AWWA B100 (2009) Standard for Granular Filter Material
AWWA B201 (2013) Soda Ash
AWWA B300 (2010; Addenda 2011) Hypochlorites
AWWA B301 (2010) Liquid Chlorine
AWWA B302 (2010) Ammonium Sulfate
AWWA B303 (2010) Sodium Chlorite
AWWA B402 (2012) Ferrous Sulfate
AWWA B403 (2009) Aluminum Sulfate – Liquid, Ground, or Lump
AWWA B404 (2008) Liquid Sodium Silicate
AWWA B405 (2006) Sodium Aluminate
AWWA B406 (2006) Ferric Sulfate
AWWA B407 (2012) Liquid Ferric Chloride
AWWA B408 (2010) Liquid Polyaluminum Chloride
AWWA B451 (2010) Poly(Diallyldimethylammonium Chloride)
AWWA B452 (2006; Addenda 2007) EPI-DMA Polyamines
AWWA B453 (2013) Polyacrylomide
AWWA B501 (2013) Sodium Hydroxide (Caustic Soda)
AWWA B502 (2011) Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate)
AWWA B503 (2011) Sodium Tripolyphosphate
AWWA B504 (2012) Monosodium Phosphate, Anhydrous
AWWA B505 (2012) Disodium Phosphate, Anhydrous
AWWA B511 (2010) Standard for Potassium Hydroxide
AWWA B550 (2010) Standard for Calcium Chloride
AWWA B600 (2010) Powdered Activated Carbon
AWWA B601 (2011) Sodium Metabisulfite
AWWA B602 (2008) Copper Sulfate
AWWA B603 (2010) Permanganates
AWWA B604 (2012) Granular Activated Carbon
AWWA B605 (2013) Reactivation of Granular Activated Carbon
AWWA B701 (2011) Sodium Fluoride
AWWA B702 (2011) Sodium Fluorosilicate
AWWA B703 (2011) Fluorosilicic Acid
AWWA C104/A21.4 (2013) Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
AWWA C105/A21.5 (2010) Polyethylene Encasement for Ductile-Iron Pipe Systems
AWWA C110/A21.10 (2012) Ductile-Iron and Gray-Iron Fittings for Water
AWWA C111/A21.11 (2012) Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
AWWA C115/A21.15 (2011) Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
AWWA C150/A21.50 (2008) Thickness Design of Ductile-Iron Pipe
AWWA C151/A21.51 (2009) Ductile-Iron Pipe, Centrifugally Cast, for Water
AWWA C153/A21.53 (2011) Ductile-Iron Compact Fittings for Water Service
AWWA C200 (2012) Steel Water Pipe – 6 In. (150 mm) and Larger
AWWA C203 (2008) Coal-Tar Protective Coatings and Linings for Steel Water Pipelines – Enamel and Tape – Hot-Applied
AWWA C205 (2012) Cement-Mortar Protective Lining and Coating for Steel Water Pipe – 4 In. (100 mm) and Larger – Shop Applied
AWWA C206 (2011) Field Welding of Steel Water Pipe
AWWA C207 (2013) Standard for Steel Pipe Flanges for Waterworks Service-Sizes 100 mm through 3600 mm 4 in. through 144 in.
AWWA C208 (2012) Standard for Dimensions for Fabricated Steel Water Pipe Fittings
AWWA C209 (2013) Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections and Fitting for Steel Water Pipelines
AWWA C210 (2007) Standard for Liquid Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
AWWA C213 (2007) Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines
AWWA C214 (2007; Addenda 2010) Tape Coating Systems for the Exterior of Steel Water Pipelines
AWWA C215 (2010) Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines
AWWA C216 (2007) Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines
AWWA C217 (2009) Petrolatum and Petroleum Wax Tape Coatings for the Exterior of Connections and Fittings for Steel Water Pipelines
AWWA C218 (2008) Coating the Exterior of Aboveground Steel Water Pipelines and Fittings
AWWA C300 (2011) Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
AWWA C301 (2007) Prestressed Concrete Pressure Pipe,Steel-Cylinder Type
AWWA C302 (2011) Reinforced Concrete Pressure Pipe, Noncylinder Type
AWWA C303 (2008) Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
AWWA C500 (2009) Metal-Seated Gate Valves for Water Supply Service
AWWA C502 (2005) Dry-Barrel Fire Hydrants
AWWA C503 (2005) Wet-Barrel Fire Hydrants
AWWA C504 (2010) Standard for Rubber-Seated Butterfly Valves
AWWA C508 (2009; Addenda A 2011) Swing-Check Valves for Waterworks Service, 2 In. (50 mm) Through 24 In. (600 mm) NPS
AWWA C509 (2009) Resilient-Seated Gate Valves for Water Supply Service
AWWA C510 (2007) Standard for Double Check Valve Backflow Prevention Assembly
AWWA C511 (2007) Standard for Reduced-Pressure Principle Backflow Prevention Assembly
AWWA C515 (2009) Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service
AWWA C550 (2013) Protective Epoxy Interior Coatings for Valves and Hydrants
AWWA C600 (2010) Installation of Ductile-Iron Water Mains and Their Appurtenances
AWWA C605 (2013) Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water
AWWA C606 (2011) Grooved and Shouldered Joints
AWWA C651 (2005; Errata 2005) Standard for Disinfecting Water Mains
AWWA C652 (2011) Disinfection of Water-Storage Facilities
AWWA C653 (2013) Disinfection of Water Treatment Plants
AWWA C654 (2013) Disinfection of Wells
AWWA C700 (2009) Standard for Cold Water Meters – Displacement Type, Bronze Main Case
AWWA C701 (2012) Standard for Cold-Water Meters – Turbine Page 30 Type for Customer Service
AWWA C702 (2010) Cold-Water Meters – Compound Type
AWWA C703 (2011) Cold-Water Meters – Fire Service Type
AWWA C704 (2012) Propeller-Type Meters for Waterworks Applications
AWWA C706 (2010) Direct-Reading, Remote-Registration Systems for Cold-Water Meters
AWWA C707 (2010) Encoder-Type Remote-Registration Systems for Cold-Water Meters
AWWA C800 (2012) Underground Service Line Valves and Fittings
AWWA C900 (2007; Errata 2008) Polyvinyl Chloride (PVC) Pressure Pipe, and Fabricated Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water Distribution
AWWA C901 (2008) Polyethylene (PE) Pressure Pipe and Tubing, 1/2 In. (13mm) Through 3 In. (76 mm), for Water Service
AWWA C905 (2010; Errata 2012) Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings 14 In. Through 48 In. (350 mm through 1,200 mm) for Water Transmission and Distribution
AWWA C906 (2007) Polyethylene (PE) Pressure Pipe and Fittings, 4 In. (100 mm) through 63 In., (1,575 mm) for Water Distribution and Transmission
AWWA C909 (2009) Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 IN through 24 IN (100 mm Through 600 mm), for Water, Wastewater, and Reclaimed Water Service
AWWA C950 (2013) Fiberglass Pressure Pipe
AWWA D100 (2011) Welded Steel Tanks for Water Storage
AWWA D102 (2011) Coating Steel Water-Storage Tanks
AWWA D103 (2009; Errata 2010) Factory-Coated Bolted Steel Tanks for Water Storage
AWWA D104 (2011) Automatically Controlled, Impressed-Current Cathodic Protection for the Interior Submerged Surfaces of Steel Water Storage Tanks
AWWA D110 (2013) Wire- and Strand Wound, Circular, Prestressed Concrete Water Tanks
AWWA D120 (2009) Thermosetting Fiberglass-Reinforced Plastic Tanks
AWWA E101 (1988) Vertical Turbine Pumps – Line Shaft and Submersible Types
AWWA M11 (2004; 4th Ed) Manual: Steel Water Pipe: A Guide for Design and Installation
AWWA M14 (2004; 3rd Ed) Manual: Recommended Practice for Backflow Prevention and Cross-Connection Control
AWWA M23 (2002; 2nd Ed) Manual: PVC Pipe – Design and Installation
AWWA M45 (2013; 3rd Ed) Fiberglass Pipe Design
AWWA M9 (2008; Errata 2013) Manual: Concrete Pressure Pipe
AMERICAN WELDING SOCIETY (AWS)
AWS A2.4 (2012) Standard Symbols for Welding, Brazing and Nondestructive Examination
AWS A3.0M/A3.0 (2010) Standard Welding Terms and Definitions
AWS A5.01M/A5.01 (2013) Procurement Guidelines for Consumables – Welding and Allied Processes – Flux and Gas Shielded Electrical Welding Processes
AWS A5.1/A5.1M (2012) Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
AWS A5.10/A5.10M (2012) Welding Consumables – Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys – Classification
AWS A5.11/A5.11M (2010) Specification for Nickel and Nickel Alloy Welding Electrodes for Shielded Metal Arc Welding
AWS A5.13 (2010) Specification for Surfacing Electrodes for Shielded Metal Arc Welding
AWS A5.13/A5.13M (2010) Specification for Surfacing Electrodes for Shielded Metal Arc Welding
AWS A5.14/A5.14M (2011) Specification for Nickel and Nickel Alloy Bare Welding Electrodes and Rods
AWS A5.18/A5.18M (2005) Carbon Steel Filler Metals for Gas Shielded Arc Welding
AWS A5.22/A5.22M (2012) Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods
AWS A5.3/A5.3M (1999; R 2007) Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding
AWS A5.32/A5.32M (2011) Specification for Welding Shielding Gases
AWS A5.36/A5.36M (2012) Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc Welding
AWS A5.4/A5.4M (2012) Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding
AWS A5.5/A5.5M (2006) Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding
AWS A5.8/A5.8M (2011; Amendment 2012) Specification for Filler Metals for Brazing and Braze Welding
AWS A5.9/A5.9M (2012) Specification for Bare Stainless Steel Welding Electrodes and Rods
AWS B2.1/B2.1M (2009) Specification for Welding Procedure and Performance Qualification
AWS B2.2/B2.2M (2010) Specification for Brazing Procedure and Performance Qualification
AWS BRH (2007; 5th Ed) Brazing Handbook
AWS C1.1M/C1.1 (2012) Recommended Practices for Resistance Welding
AWS C2.18 (1993; Errata 1993; R 2001) Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites
AWS C2.25/C2.25M (2012) Specification for Thermal Spray Feedstock — Solid and Composite Wire and Ceramic Rods
AWS C5.5/C5.5M (2003) Recommended Practices for Gas Tungsten Arc Welding
AWS D1.1/D1.1M (2010; Errata 2011) Structural Welding Code – Steel
AWS D1.2/D1.2M (2008) Structural Welding Code – Aluminum
AWS D1.3/D1.3M (2008; Errata 2008) Structural Welding Code – Sheet Steel
AWS D1.4/D1.4M (2011) Structural Welding Code – Reinforcing Steel
AWS D1.5M/D1.5 (2010) Bridge Welding Code
AWS D1.8/D1.8M (2009) Structural Welding Code—Seismic Supplement
AWS D10.10/D10.10M (1999; R 2009) Recommended Practices for Local Heating of Welds in Piping and Tubing
AWS D10.11M/D10.11 (2007) Guide for Root Pass Welding of Pipe Without Backing
AWS D10.12M/D10.12 (2000) Guideline for Welding Mild Steel Pipe
AWS D10.4 (1986; R 2000) Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing
AWS D10.7/D10.7M (2008) Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe
AWS D14.1/D14.1M (2005) Specification for Welding Industrial and Mill Cranes and Other Material Handling Equipment
AWS D14.4/D14.4M (2012) Specification for Welded Joints for Machinery and Equipment
AWS D9.1M/D9.1 (2012) Sheet Metal Welding Code
AWS QC1 (2007) Standard for AWS Certification of Welding Inspectors
AWS QC7 (1993; Suppl G) Standard for AWS Certified Welders
AWS WHB-2.9 (2004) Welding Handbook; Volume 2, Welding Processes, Part 1
AWS WHB-4.8 (1998) Welding Handbook, Volume 4 – Materials and
Applications Part 2
AWS Z49.1 (2012) Safety in Welding and Cutting and Allied Processes
AWS-03 (2011) Welding Handbook, Volumes 1 thru 4
AMERICAN WOOD COUNCIL (AWC)
AWC NDS (2012) National Design Specification (NDS) for Wood Construction
AWC WFCM (2012) Wood Frame Construction Manual for One- and Two-Family Dwellings
AMERICAN WOOD PROTECTION ASSOCIATION (AWPA)
AWPA A1 (2011) Standard Methods for Analysis of Creosote and Oil-Type Preservatives
AWPA A2 (2011) Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations
AWPA A3 (2008) Standard Method for Determining Penetration of Preservatives and Fire Retardants
AWPA A4 (2011) Standard Methods for Sampling Wood Preservatives
AWPA A5 (2011) Standard Methods for Analysis of Oil-Borne Preservatives
AWPA A6 (2009) Standard Method for the Determination of Oil-Type Preservatives from Small Samples
AWPA A8 (1990) Qualitative Recovery of Creosote or Creosote Solution from Freshly Treated Piles, Poles, or Timber (Squeeze Method)
AWPA A9 (2013) Standard Method for Analysis of Treated Wood and Treating Solutions by X-Ray Spectroscopy
AWPA BOOK (2012) AWPA Book of Standards
AWPA C1 (2003) All Timber Products – Preservative Treatment by Pressure Processes
AWPA C18 (2003) Standard For Pressure Treated Material in Marine Construction
AWPA C2 (2003) Lumber, Timber, Bridge Ties and Mine Ties – Preservative Treatment by Pressure Processes
AWPA C20 (2003) Structural Lumber Fire-Retardant Treatment
by Pressure Processes
AWPA C25 (2003) Sawn Crossarms – Preservative Treatment by
Pressure Processes
AWPA C27 (2002) Plywood – Fire-Retardant Treatment by
Pressure Processes
AWPA C28 (2003) Standard for Preservative Treatment of Structural Glued Laminated Members and Lamination Before Gluing of Southern Pine, Coastal Douglas Fir, Hemfir and Western Hemlock by Pressure Processes
AWPA C3 (2003) Piles – Preservative Treatment by Pressure Processes
AWPA C33 (2003) Standard for Preservative Treatment of Structural Composite Lumber by Pressure Processes
AWPA C4 (2003) Poles – Preservative Treatment by Pressure Processes
AWPA C6 (1999) Crossties and Switch Ties – Preservative Treatment by Pressure Processes
AWPA C9 (2003) Plywood – Preservative Treatment by Pressure Processes
AWPA M1 (2012) Standard for the Purchase of Treated Wood Products
AWPA M2 (2011) Standard for Inspection of Treated Wood Products
AWPA M3 (2013) Standard Quality Control Procedures for Wood Preserving Plants
AWPA M4 (2011) Standard for the Care of Preservative-Treated Wood Products
AWPA M6 (2013) Brands Used on Preservative Treated Materials
AWPA P1/P13 (2009) Standard for Creosote Preservative
AWPA P18 (2010) Nonpressure Preservatives
AWPA P2 (2009) Standard for Creosote Solutions
AWPA P3 (2009) Standard for Creosote – Petroleum Oil Solution
AWPA P49 (2010) Standard for Fire Retardant FR-1
AWPA P5 (2007) Standard for Waterborne Preservatives
AWPA P8 (2006) Standard for Oil-Borne Preservatives
AWPA P9 (2010) Standards for Solvents and Formulations for Organic Preservative Systems
AWPA T1 (2013) Use Category System: Processing and Treatment Standard
AWPA U1 (2013) Use Category System: User Specification for Treated Wood
APA – THE ENGINEERED WOOD ASSOCIATION (APA)
APA E30 (2011) Engineered Wood Construction Guide
APA E445 (2002) Performance Standards and Qualification Policy for Structural-Use Panels (APA PRP-108)
APA EWCG (2011) Engineered Wood Construction Guide: Building Requirements and Related Panel Systems
APA EWS R540 (2007) Builder Tips Proper Storage and Handling of Glulam Beams
APA EWS T300 (2007) Technical Note: Glulam Connection Details
APA F405 (1999) Performance Rated Panels
APA L870 (2010) Voluntary Product Standard, PS 1-09, Structural Plywood
APA PS 1 (2009) Structural Plywood (with Typical APA Trademarks)
APA S350 (2011) Performance Standard for Wood-Based Structural-Use Panels
ARCHITECTURAL WOODWORK INSTITUTE (AWI)
AWI AWS (2009) Architectural Woodwork Standards
ARCNET TRADE ASSOCIATION (ATA)
ATA 878.1 (1999) Local Area Network: Token Bus
ASM INTERNATIONAL (ASM)
ASM 06118G (1993) ASM Metals Reference Book (3rd Ed)
ASM STFA (2001; 6th Ed) The Surface Treatment and Finishing of Aluminum and Its Alloys (2 Vol.)
ASME INTERNATIONAL (ASME)
ASME A112.1.2 (2012) Standard for Air Gaps in Plumbing Systems
(For Plumbing Fixtures and Water-Connected
Receptors)
ASME A112.14.1 (2003; R 2012) Backwater Valves
ASME A112.18.1/CSA B125.1(2012) Plumbing Supply Fittings
ASME A112.19.1/CSA B45.2(2013) Enameled Cast Iron and Enameled Steel
Plumbing Fixtures
ASME A112.19.17 (2010) Manufactured Safety Vacuum Release Systems
(SVRS) for Residential and Commercial Swimming
Pool, Spa, Hot Tub, and Wading Pool Suction Systems
ASME A112.19.2/CSA B45.1(2013) Standard for Vitreous China Plumbing
Fixtures and Hydraulic Requirements for Water
Closets and Urinals
ASME A112.19.3/CSA B45.4(2008; R 2013) Stainless Steel Plumbing Fixtures
ASME A112.19.5 (2011) Trim for Water-Closet Bowls, Tanks and
Urinals
ASME A112.19.8 (2007; Addenda A 2008; Addenda B 2009) Suction
Fittings for Use in Swimming Pools, Wading Pools,
Spas, And Hot Tubs
ASME A112.36.2M (1991; R 2012) Cleanouts
ASME A112.6.1M (1997; R 2012) Floor Affixed Supports for
Off-the-Floor Plumbing Fixtures for Public Use
ASME A112.6.3 (2001; R 2007) Standard for Floor and Trench Drains
ASME A112.6.4 (2003: R 2012) Roof, Deck and Balcony Drains
Page 37
ASME A13.1 (2007; R 2013) Scheme for the Identification of
Piping Systems
ASME A17.1/CSA B44 (2013) Safety Code for Elevators and Escalators
ASME A17.2 (2012) Guide for Inspection of Elevators,
Escalators, and Moving Walks Includes Inspection
Procedures for Electric Traction and Winding Drum
Elevators, Hydraulic Elevators, and Escalators and
Moving Walks
ASME A17.3 (2011) Safety Code for Existing Elevators and
Escalators
ASME AG 1 (2012) Code on Nuclear Air and Gas Treatment
ASME B1.1 (2003; R 2008) Unified Inch Screw Threads (UN and
UNR Thread Form)
ASME B1.2 (1983; Errata 1992; R 2007) Gages and Gaging for
Unified Inch Screw Threads
ASME B1.20.1 (2013) Pipe Threads, General Purpose (Inch)
ASME B1.20.2M (2006; R 2011) Pipe Threads, 60 Deg. General
Purpose (Metric)
ASME B1.20.3 (1976; R 2013) Dryseal Pipe Threads (Inch)
ASME B1.20.7 (1991; R 2013) Standard for Hose Coupling Screw
Threads (Inch)
ASME B1.21M (1997; R 2013) Standard for Metric Screw Threads -
MJ Profile
ASME B16.1 (2010) Gray Iron Pipe Flanges and Flanged Fittings
Classes 25, 125, and 250
ASME B16.10 (2009) Face-to-Face and End-to-End Dimensions of
Valves
ASME B16.11 (2011) Forged Fittings, Socket-Welding and Threaded
ASME B16.12 (2009) Cast Iron Threaded Drainage Fittings
ASME B16.15 (2013) Cast Copper Alloy Threaded Fittings Classes
125 and 250
ASME B16.18 (2012) Cast Copper Alloy Solder Joint Pressure
Fittings
ASME B16.20 (2012) Metallic Gaskets for Pipe Flanges -
Ring-Joint, Spiral Wound, and Jacketed
ASME B16.21 (2011) Nonmetallic Flat Gaskets for Pipe Flanges
ASME B16.22 (2013) Standard for Wrought Copper and Copper Alloy
Page 38
Solder Joint Pressure Fittings
ASME B16.23 (2011) Cast Copper Alloy Solder Joint Drainage
Fittings – DWV
ASME B16.24 (2011) Cast Copper Alloy Pipe Flanges and Flanged
Fittings: Classes 150, 300, 600, 900, 1500, and 2500
ASME B16.25 (2012) Standard for Buttwelding Ends
ASME B16.26 (2013) Standard for Cast Copper Alloy Fittings for
Flared Copper Tubes
ASME B16.29 (2012) Wrought Copper and Wrought Copper Alloy
Solder Joint Drainage Fittings – DWV
ASME B16.3 (2011) Malleable Iron Threaded Fittings, Classes
150 and 300
ASME B16.33 (2012) Manually Operated Metallic Gas Valves for
Use in Gas Piping Systems Up to 125 psi, Sizes NPS
1/2 – NPS 2
ASME B16.34 (2013) Valves – Flanged, Threaded and Welding End
ASME B16.36 (2009) Orifice Flanges
ASME B16.38 (2012) Large Metallic Valves for Gas Distribution
(Manually Operated, NPS 2 1/2 to 12, 125 psig
Maximum)
ASME B16.39 (2009) Standard for Malleable Iron Threaded Pipe
Unions; Classes 150, 250, and 300
ASME B16.4 (2011) Standard for Gray Iron Threaded Fittings;
Classes 125 and 250
ASME B16.40 (2013) Manually Operated Thermoplastic Gas Shutoffs
and Valves in Gas Distribution Systems
ASME B16.42 (2011) Ductile Iron Pipe Flanges and Flanged
Fittings, Classes 150 and 300
ASME B16.5 (2013) Pipe Flanges and Flanged Fittings: NPS 1/2
Through NPS 24 Metric/Inch Standard
ASME B16.50 (2013) Wrought Copper and Copper Alloy Braze-Joint
Pressure Fittings
ASME B16.9 (2012) Standard for Factory-Made Wrought Steel
Buttwelding Fittings
ASME B17.1 (1967; R 2013) Keys and Keyseats
ASME B17.2 (1967; R 2013) Woodruff Keys and Keyseats
ASME B18.13 (1996; Addenda A 1998; R 2013) Screw and Washer
Page 39
Assemblies – Sems (Inch Series)
ASME B18.13.1M (2011) Screw and Washer Assemblies-SEMS (Metric
Series)
ASME B18.2.1 (2012; Errata 2013) Square and Hex Bolts and Screws
(Inch Series)
ASME B18.2.2 (2010) Nuts for General Applications: Machine Screw
Nuts, Hex, Square, Hex Flange, and Coupling Nuts
(Inch Series)
ASME B18.2.3.8M (1981; R 2005) Metric Hex Lag Screws
ASME B18.2.6 (2010; Supp 2011) Fasteners for Use in Structural
Applications
ASME B18.2.6M (2012) Metric Fasteners for Use in Structural
Applications
ASME B18.21.1 (2009) Washers: Helical Spring-Lock, Tooth Lock,
and Plain Washers (Inch Series)
ASME B18.21.2M (1999; R 2005; R 2014) Lock Washers (Metric Series)
ASME B18.22M (1981; R 2010) Metric Plain Washers
ASME B18.24 (2004; Addenda A 2006; R 2011) Part Identifying
Number (PIN) Code System Standard for B18 Fastener
Products
ASME B18.27 (1998; R 2010) Tapered and Reduced Cross Section
Retaining Rings (Inch Series)
ASME B18.3.3M (1986; R 2008) Hexagon Socket Head Shoulder Screws
(Metric Series)
ASME B18.5.2.1M (2006; R 2011) Metric Round Head Short Square Neck
Bolts
ASME B18.5.2.2M (1982; R 2010) Metric Round Head Square Neck Bolts
ASME B18.6.1 (1981; R 2008) Wood Screws (Inch Series)
ASME B18.6.2 (1998; R 2010) Slotted Head Cap Screws, Square Head
Set Screws, and Slotted Headless Set Screws: Inch
Series
ASME B18.6.3 (2013) Machine Screws, Tapping Screws, and Machine
Drive Screws (Inch Series)
ASME B18.6.5M (2000; R 2010) Standard Specification for Metric
Thread-Forming and Thread-Cutting Tapping Screws
ASME B18.6.7M (1999; R 2010) Metric Machine Screws
ASME B19.3 (1991; Addenda A 1994; Addenda B 1995) Safety
Page 40
Standard for Compressors for Process Industries
ASME B20.1 (2012) Safety Standard for Conveyors and Related
Equipment
ASME B27.7 (1977; R 2010) General Purpose Tapered and Reduced
Cross Section Retaining Rings, Metric
ASME B29.100 (2011) Precision Power Transmission, Dbl-P-Power
Transmission, Dbl-P-conveyor Roller Chains,
Attachments and Sprockets
ASME B29.400 (2001; R 2013) Combination, “H” Type Mill Chains,
and Sprockets
ASME B30.10 (2009) Hooks
ASME B30.11 (2010) Monorails and Underhung Cranes – Safety
Standard for Cableways, Cranes, Derricks, Hoists,
Hooks, Jacks, and Slings
ASME B30.16 (2012) Overhead Hoists (Underhung)
ASME B30.17 (2006; R 2012) Overhead and Gantry Cranes (Top
Running Bridge, Single Girder, Underhung Hoists)
ASME B30.2 (2011) Overhead and Gantry Cranes (Top Running
Bridge, Single or Multiple Girder, Top Running
Trolley Hoist)
ASME B30.22 (2010) Articulating Boom Cranes
ASME B30.3 (2012) Tower Cranes
ASME B30.5 (2011) Mobile and Locomotive Cranes
ASME B30.8 (2010) Floating Cranes and Floating Derricks
ASME B31.1 (2012; INT 2-6, 8-10, 13, 15, 17-25, 27-31 and
42-46) Power Piping
ASME B31.3 (2012) Process Piping
ASME B31.4 (2012) Pipeline Transportation Systems for Liquid
Hydrocarbons and Other Liquid
ASME B31.5 (2013) Refrigeration Piping and Heat Transfer
Components
ASME B31.8 (2013) Gas Transmission and Distribution Piping
Systems
ASME B31.9 (2011) Building Services Piping
ASME B36.10M (2004; R 2010) Standard for Welded and Seamless
Wrought Steel Pipe
Page 41
ASME B36.19M (2004; R 2010) Stainless Steel Pipe
ASME B4.1 (1967; R 2009) Preferred Limits and Fits for
Cylindrical Parts
ASME B40.100 (2013) Pressure Gauges and Gauge Attachments
ASME B40.200 (2013) Thermometers, Direct Reading and Remote
Reading
ASME B46.1 (2009) Surface Texture, Surface Roughness, Waviness
and Lay
ASME B73.1 (2012) Specification for Horizontal End Suction
Centrifugal Pumps for Chemical Process
ASME B73.2 (2003; R 2008) Specification for Vertical In-Line
Centrifugal Pumps for Chemical Process
ASME BPVC (2010) Boiler and Pressure Vessels Code
ASME BPVC SEC I (2010) BPVC Section I-Rules for Construction of
Power Boilers
ASME BPVC SEC II-A (2010) BPVC Section II-Materials-Part A-Ferrous
Materials Specifications
ASME BPVC SEC II-C (2010) BPVC Section II-Materials Part
C-Specifications for Welding Rods Electrodes and
Filler Metals
ASME BPVC SEC IV (2010) BPVC Section IV-Rules for Construction of
Heating Boilers
ASME BPVC SEC IX (2010) BPVC Section IX-Welding and Brazing
Qualifications
ASME BPVC SEC V (2010) BPVC Section V-Nondestructive Examination
ASME BPVC SEC VI (2010) BPVC Section VI-Recommended Rules for the
Care and Operation of Heating Boilers
ASME BPVC SEC VII (2010) BPVC Section VII-Recommended Guidelines for
the Care of Power Boilers
ASME BPVC SEC VIII (2010) Boiler and Pressure Vessel Codes: Section
VIII Rules for Construction of Pressure Vessel
ASME BPVC SEC VIII D1 (2010) BPVC Section VIII-Rules for Construction of
Pressure Vessels Division 1
ASME BPVC SEC VIII D2 (2010) BPVC Section VIII-Rules for Construction of
Pressure Vessels Division 2-Alternative Rules
ASME CSD-1 (2012) Control and Safety Devices for Automatically
Fired Boilers
Page 42
ASME HST-1 (2012) Performance Standard for Electric Chain
Hoists
ASME HST-2 (1999; R 2010) Performance Standard for Hand Chain
Manually Operated Chain Hoists
ASME HST-3 (1999; R 2010) Performance Standard for Manually
Lever Operated Chain Hoists
ASME HST-4 (1999; R 2010) Performance Standard for Overhead
Electric Wire Rope Hoists
ASME HST-5 (1999; R 2010) Performance Standard for Air Chain
Hoists
ASME HST-6 (1999; R 2010) Performance Standard for Air Wire
Rope Hoists
ASME MFC-3M (2004; Addenda A 2007) Measurement of Fluid Flow in
Pipes Using Orifice, Nozzle, and Venturi
ASME N509 (2002; R 2008) Nuclear Power Plant Air-Cleaning
Units and Components
ASME N510 (2007) Testing of Nuclear Air – Treatment Systems
ASME NOG-1 (2010) Rules for Construction of Overhead and
Gantry Cranes (Top Running Bridge, Multiple Girder)
ASME NQA-1 (2012) Quality Assurance Requirements for Nuclear
Facility Applications
ASME NUM-1 (2009) Rules for Construction of Cranes, Monorails,
and Hoists with Bridge or Trolley or Hoist of the
Underhung Type.
ASME PTC 10 (1997; R 2009) Performance Test Code on Compressors
and Exhausters
ASME PTC 12.3 (1997; R 2009) Performance Test Code on Deaerators
ASME PTC 19.10 (1981) Flue and Exhaust Gas Analyses
ASME PTC 19.11 (2008; R 2013) Steam and Water Sampling,
Conditioning, and Analysis in the Power Cycle
ASME PTC 19.2 (2010) Pressure Measurement
ASME PTC 19.3 TW (2010) Thermowells Performance Test Codes
ASME PTC 19.5 (2004; R 2013) Flow Measurement
ASME PTC 25 (2008) Pressure Relief Devices
ASME PTC 38 (1980; R 1985) Determining the Concentration of
Particulate Matter in a Gas Stream
Page 43
ASME PTC 4 (2013) Fired Steam Generators
ASME PTC 9 (1970; R 1997) Displacement Compressors, Vacuum
Pumps and Blowers (for historical reference only)
ASME QEI-1 (2013) Standard for the Qualification of Elevator
Inspectors
ASPHALT INSTITUTE (AI)
AI MS-2 (1997 6th Ed) Mix Design Methods
AI MS-22 (2001; 2nd Ed) Construction of Hot-Mix Asphalt
Pavements
AI SP-2 (2001; 3rd Ed) Superpave Mix Design
ASPHALT ROOFING MANUFACTURER’S ASSOCIATION (ARMA)
ARMA 410BUR88 (2001) Manual of Roof Maintenance and Repair
ARMA PMBRG98 (1998) Quality Control Guideline for the
Application of Polymer Modified Bitumen Roofing
ASSOCIATED AIR BALANCE COUNCIL (AABC)
AABC MN-1 (2002; 6th ed) National Standards for Total System
Balance
AABC MN-4 (1996) Test and Balance Procedures
ACG Commissioning Guideli(n2e005) Commissioning Guideline
ASSOCIATION FOR IRON AND STEEL TECHNOLOGY (AIST)
AIST PB-229 (2008) Stainless Steels: A Steel Products Manual
ASSOCIATION FOR THE ADVANCEMENT OF MEDICAL INSTRUMENTATION (AAMI)
ANSI/AAMI ST8 (2013) Hospital Steam Sterilizers
ASSOCIATION OF EDISON ILLUMINATING COMPANIES (AEIC)
AEIC C8 (2000) Extruded Dielectric Shielded Power Cables
Rated 5 Through 46 kV
AEIC CS1 (2012) Impregnated-Paper-Insulated, Metallic
Sheathed Cable, Solid Type
AEIC CS8 (2007) specification for Extruded Dielectric
Shielded Power Cables Rated 5 Through 46 kV
ASSOCIATION OF HOME APPLIANCE MANUFACTURERS (AHAM)
AHAM RAC-1 (1982; R2008) Directory of Certified Room Air
Conditioners
Page 44
ASSOCIATION OF THE WALL AND CEILING INDUSTRIES – INTERNATIONAL
(AWCI)
AWCI TM 12-A (1997; 3rd Ed) Standard Practice for the Testing
and Inspection of Field Applied Sprayed
Fire-Resistive Materials; An Annotated Guide
ASTM INTERNATIONAL (ASTM)
ASTM 01.01 (2014) Steel – Piping, Tubing, Fittings
ASTM A1 (2000; R 2010) Standard Specification for Carbon
Steel Tee Rails
ASTM A1003/A1003M (2013b) Standard Specification for Steel Sheet,
Carbon, Metallic- and Nonmetallic-Coated for
Cold-Formed Framing Members
ASTM A1008/A1008M (2013) Standard Specification for Steel, Sheet,
Cold-Rolled, Carbon, Structural, High-Strength
Low-Alloy and High-Strength Low-Alloy with Improved
Formability, Solution Hardened, and Bake Hardened
ASTM A1011/A1011M (2013) Standard Specification for Steel, Sheet, and
Strip, Hot-Rolled, Carbon, Structural,
High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability and Ultra-High Strength
ASTM A1018/A1018M (2010) Standard Specification for Steel, Sheet and
Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon,
Commercial, Drawing, Structural, High-Strength
Low-Alloy, High-Strength Low-Alloy with Improved
Formability, and Ultra-High Strength
ASTM A1023/A1023M (2009; E 2012) Standard Specification for Stranded
Carbon Steel Wire Ropes for General Purposes
ASTM A1035/A1035M (2013b) Standard Specification for Deformed and
Plain, Low-carbon, Chromium, Steel Bars for
Concrete Reinforcement
ASTM A105/A105M (2013) Standard Specification for Carbon Steel
Forgings for Piping Applications
ASTM A1055/A1055M (2010; E 2011) Standard Specification for Zinc and
Epoxy Dual Coated Steel Reinforcing Bars
ASTM A106/A106M (2013) Standard Specification for Seamless Carbon
Steel Pipe for High-Temperature Service
ASTM A1064/A1064M (2013) Standard Specification for Carbon-Steel Wire
and Welded Wire Reinforcement, Plain and Deformed,
for Concrete
ASTM A108 (2013) Standard Specification for Steel Bar, Carbon
and Alloy, Cold-Finished
Page 45
ASTM A1085 (2013) Standard Specification for Cold-Formed
Welded Carbon Steel Hollow Structural Sections (HSS)
ASTM A109/A109M (2013) Standard Specification for Steel, Strip,
Carbon (0.25 Maximum Percent), Cold-Rolled
ASTM A116 (2011) Standard Specification for Metallic-Coated,
Steel Woven Wire Fence Fabric
ASTM A121 (2013) Standard Specification for Metallic-Coated
Carbon Steel Barbed Wire
ASTM A123/A123M (2013) Standard Specification for Zinc (Hot-Dip
Galvanized) Coatings on Iron and Steel Products
ASTM A126 (2004; R 2009) Standard Specification for Gray Iron
Castings for Valves, Flanges, and Pipe Fittings
ASTM A128/A128M (1993; R 2012) Standard Specification for Steel
Castings, Austenitic Manganese
ASTM A134 (1996; R 2012) Standard Specification for Pipe,
Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16
and Over)
ASTM A135/A135M (2009) Standard Specification for
Electric-Resistance-Welded Steel Pipe
ASTM A139/A139M (2004; R 2010) Standard Specification for
Electric-Fusion (ARC)-Welded Steel Pipe (NPS 4 and
over)
ASTM A143/A143M (2007) Standard Practice for Safeguarding Against
Embrittlement of Hot-Dip Galvanized Structural
Steel Products and Procedure for Detecting
Embrittlement
ASTM A148/A148M (2008) Standard Specification for Steel Castings,
High Strength, for Structural Purposes
ASTM A153/A153M (2009) Standard Specification for Zinc Coating
(Hot-Dip) on Iron and Steel Hardware
ASTM A159 (1983; R 2011) Standard Specification for
Automotive Gray Iron Castings
ASTM A167 (1999; R 2009) Standard Specification for Stainless
and Heat-Resisting Chromium-Nickel Steel Plate,
Sheet, and Strip
ASTM A176 (1999; R 2009) Standard Specification for Stainless
and Heat-Resisting Chromium Steel Plate, Sheet, and
Strip
ASTM A179/A179M (1990; R 2012) Standard Specification for Seamless
Cold-Drawn Low-Carbon Steel Heat-Exchanger and
Condenser Tubes
Page 46
ASTM A181/A181M (2013) Standard Specification for Carbon Steel
Forgings, for General-Purpose Piping
ASTM A182/A182M (2013a) Standard Specification for Forged or Rolled
Alloy-Steel Pipe Flanges, Forged Fittings, and
Valves and Parts for High-Temperature Service
ASTM A183 (2003; R 2009) Standard Specification for Carbon
Steel Track Bolts and Nuts
ASTM A184/A184M (2006; E2011) Standard Specification for Fabricated
Deformed Steel Bar Mats for Concrete Reinforcement
ASTM A185/A185M (2007) Standard Specification for Steel Welded Wire
Reinforcement, Plain, for Concrete
ASTM A192/A192M (2002; R 2012) Standard Specification for Seamless
Carbon Steel Boiler Tubes for High-Pressure Service
ASTM A193/A193M (2012a) Standard Specification for Alloy-Steel and
Stainless Steel Bolting Materials for
High-Temperature Service and Other Special Purpose
Applications
ASTM A194/A194M (2013) Standard Specification for Carbon and Alloy
Steel Nuts for Bolts for High-Pressure or
High-Temperature Service, or Both
ASTM A197/A197M (2000; R 2011) Standard Specification for Cupola
Malleable Iron
ASTM A20/A20M (2013) General Requirements for Steel Plates for
Pressure Vessels
ASTM A211 (1975; R 1985) Specification for Spiral-Welded
Steel or Iron Pipe
ASTM A216/A216M (2012) Standard Specification for Steel Castings,
Carbon, Suitable for Fusion Welding, for
High-Temperature Service
ASTM A217/A217M (2012) Standard Specification for Steel Castings,
Martensitic Stainless and Alloy, for
Pressure-Containing Parts, Suitable for
High-Temperature Service
ASTM A220/A220M (1999; R 2009) Standard Specification for Pearlitic
Malleable Iron
ASTM A227/A227M (2006; R 2011) Standard Specification for Steel
Wire, Cold-Drawn for Mechanical Springs
ASTM A229/A229M (2012) Standard Specification for Steel Wire,
Oil-Tempered for Mechanical Springs
ASTM A234/A234M (2013; E 2014) Standard Specification for Piping
Fittings of Wrought Carbon Steel and Alloy Steel
Page 47
for Moderate and High Temperature Service
ASTM A239 (1995; R 2009; E 2009) Standard Practice for
Locating the Thinnest Spot in a Zinc (Galvanized)
Coating on Iron or Steel Articles
ASTM A240/A240M (2013c) Standard Specification for Chromium and
Chromium-Nickel Stainless Steel Plate, Sheet, and
Strip for Pressure Vessels and for General
Applications
ASTM A242/A242M (2013) Standard Specification for High-Strength
Low-Alloy Structural Steel
ASTM A249/A249M (2010a) Standard Specification for Welded
Austenitic Steel Boiler, Superheater,
Heat-Exchanger, and Condenser Tubes
ASTM A252 (2010) Standard Specification for Welded and
Seamless Steel Pipe Piles
ASTM A263 (2012) Standard Specification for Stainless
Chromium Steel-Clad Plate
ASTM A264 (2011) Standard Specification for Stainless
Chromium-Nickel Steel-Clad Plate
ASTM A265 (2012) Standard Specification for Nickel and
Nickel-Base Alloy-Clad Steel Plate
ASTM A266/A266M (2013) Standard Specification for Carbon Steel
Forgings for Pressure Vessel Components
ASTM A268/A268M (2010) Standard Specification for Seamless and
Welded Ferritic and Martensitic Stainless Steel
Tubing for General Service
ASTM A269 (2013) Standard Specification for Seamless and
Welded Austenitic Stainless Steel Tubing for
General Service
ASTM A27/A27M (2013) Standard Specification for Steel Castings,
Carbon, for General Application
ASTM A270/A270M (2010) Standard Specification for Seamless and
Welded Austenitic Stainless Steel Sanitary Tubing
ASTM A275/A275M (2008; R 2013) Standard Test Method for Magnetic
Particle Examination of Steel Forgings
ASTM A276 (2013a) Standard Specification for Stainless Steel
Bars and Shapes
ASTM A278/A278M (2001; R 2011) Standard Specification for Gray Iron
Castings for Pressure-Containing Parts for
Temperatures Up to 650 degrees F (350 degrees C)
Page 48
ASTM A283/A283M (2013) Standard Specification for Low and
Intermediate Tensile Strength Carbon Steel Plates
ASTM A285/A285M (2012) Standard Specification for Pressure Vessel
Plates, Carbon Steel, Low- and Intermediate-Tensile
Strength
ASTM A29/A29M (2013) Standard Specification for General
Requirements for Steel Bars, Carbon and Alloy,
Hot-Wrought
ASTM A290/A290M (2005; R 2010) Standard Specification for Carbon
and Alloy Steel Forgings for Rings for Reduction
Gears
ASTM A297/A297M (2010) Standard Specification for Steel Castings,
Iron-Chromium and Iron-Chromium-Nickel, Heat
Resistant, for General Application
ASTM A302/A302M (2012) Standard Specification for Pressure Vessel
Plates, Alloy Steel, Manganese-Molybdenum and
Manganese-Molybdenum-Nickel
ASTM A307 (2012) Standard Specification for Carbon Steel
Bolts and Studs, 60 000 PSI Tensile Strength
ASTM A308/A308M (2010) Standard Specification for Steel Sheet,
Terne (Lead-Tin Alloy) Coated by the Hot Dip Process
ASTM A312/A312M (2013b) Standard Specification for Seamless,
Welded, and Heavily Cold Worked Austenitic
Stainless Steel Pipes
ASTM A313/A313M (2013) Standard Specification for Stainless Steel
Spring Wire
ASTM A319 (1971; R 2011) Standard Specification for Gray Iron
Castings for Elevated Temperatures for Non-Pressure
Containing Parts
ASTM A320/A320M (2011a) Standard Specification for Alloy/Steel and
Stainless Steel Bolting Materials for
Low-Temperature Service
ASTM A322 (2013) Standard Specification Steel Bars, Alloy,
Standard Grades
ASTM A325 (2010; E 2013) Standard Specification for
Structural Bolts, Steel, Heat Treated, 120/105 ksi
Minimum Tensile Strength
ASTM A325M (2013) Standard Specification for Structural Bolts,
Steel, Heat Treated, 830 MPa Minimum Tensile
Strength (Metric)
ASTM A328/A328M (2013a) Standard Specification for Steel Sheet
Piling
Page 49
ASTM A334/A334M (2004a; R 2010) Standard Specification for Seamless
and Welded Carbon and Alloy-Steel Tubes for
Low-Temperature Service
ASTM A336/A336M (2010a) Standard Specification for Alloy Steel
Forgings for Pressure and High-Temperature Parts
ASTM A345 (2009) Standard Specification for Flat-Rolled
Electrical Steels for Magnetic Applications
ASTM A350/A350M (2013) Standard Specification for Carbon and
Low-Alloy Steel Forgings, Requiring Notch Toughness
Testing for Piping Components
ASTM A351/A351M (2013) Standard Specification for Castings,
Austenitic, for Pressure-Containing Parts
ASTM A352/A352M (2006; R 2012) Standard Specification for Steel
Castings, Ferritic and Martensitic, for
Pressure-Containing Parts, Suitable for
Low-Temperature Service
ASTM A354 (2011) Standard Specification for Quenched and
Tempered Alloy Steel Bolts, Studs, and Other
Externally Threaded Fasteners
ASTM A356/A356M (2011) Standard Specification for Steel Castings,
Carbon, Low Alloy, and Stainless Steel,
Heavy-Walled for Steam Turbines
ASTM A358/A358M (2012) Standard Specification for
Electric-Fusion-Welded Austenitic Chromium-Nickel
Stainless Steel Pipe for High-Temperature Service
and General Applications
ASTM A36/A36M (2012) Standard Specification for Carbon Structural
Steel
ASTM A366/A366M (1997e1) Standard Specification for Commercial
Steel (CS) Sheet, Carbon,(0.15 Maximum Percent)
Cold-Rolled
ASTM A368 (1995; R 2013) Standard Specification for Stainless
Steel Wire Strand
ASTM A370 (2012a) Standard Test Methods and Definitions for
Mechanical Testing of Steel Products
ASTM A376/A376M (2013) Standard Specification for Seamless
Austenitic Steel Pipe for High-Temperature
Central-Station Service
ASTM A380/A380M (2013) Standard Practice for Cleaning, Descaling,
and Passivation of Stainless Steel Parts,
Equipment, and Systems
ASTM A385/A385M (2011) Standard Practice for Providing High-Quality
Page 50
Zinc Coatings (Hot-Dip)
ASTM A392 (2011a) Standard Specification for Zinc-Coated
Steel Chain-Link Fence Fabric
ASTM A395/A395M (1999; R 2009) Standard Specification for Ferritic
Ductile Iron Pressure-Retaining Castings for Use at
Elevated Temperatures
ASTM A403/A403M (2013a) Standard Specification for Wrought
Austenitic Stainless Steel Piping Fittings
ASTM A416/A416M (2012) Standard Specification for Steel Strand,
Uncoated Seven-Wire for Prestressed Concrete
ASTM A420/A420M (2013) Standard Specification for Piping Fittings
of Wrought Carbon Steel and Alloy Steel for
Low-Temperature Service
ASTM A421/A421M (2010) Standard Specification for Uncoated
Stress-Relieved Steel Wire for Prestressed Concrete
ASTM A423/A423M (2009) Standard Specification for Seamless and
Electric-Welded Low-Alloy Steel Tubes
ASTM A424/A424M (2009a) Standard Specification for Steel Sheet for
Porcelain Enameling
ASTM A428/A428M (2010) Standard Test Method for Weight (Mass) of
Coating on Aluminum-Coated Iron or Steel Articles
ASTM A435/A435M (1990; R 2012) Standard Specification for
Straight-Beam Ultrasonic Examination of Steel Plates
ASTM A436 (1984; R 2011) Standard Specification for
Austenitic Gray Iron Castings
ASTM A439 (1983; R 2009) Standard Specification for
Austenitic Ductile Iron Castings
ASTM A447/A447M (2011) Standard Specification for Steel Castings,
Chromium-Nickel-Iron Alloy (25-12 Class), for
High-Temperature Service
ASTM A449 (2010) Standard Specification for Hex Cap Screws,
Bolts, and Studs, Steel, Heat Treated, 120/105/90
ksi Minimum Tensile Strength, General Use
ASTM A463/A463M (2010) Standard Specification for Steel Sheet,
Aluminum-Coated, by the Hot-Dip Process
ASTM A467/A467M (2007; R 2012) Standard Specification for Machine
Coil Chain
ASTM A47/A47M (1999; R 2009) Standard Specification for Ferritic
Malleable Iron Castings
Page 51
ASTM A475 (2003a; E 2009; R 2009) Standard Specification for
Zinc-Coated Steel Wire Strand
ASTM A478 (1997; R 2013) Standard Specification for
Chromium-Nickel Stainless Steel Weaving and
Knitting Wire
ASTM A479/A479M (2013b) Standard Specification for Stainless Steel
Bars and Shapes for Use in Boilers and Other
Pressure Vessels
ASTM A48/A48M (2003; R 2012) Standard Specification for Gray Iron
Castings
ASTM A480/A480M (2013b) Standard Specification for General
Requirements for Flat-Rolled Stainless and
Heat-Resisting Steel Plate, Sheet, and Strip
ASTM A484/A484M (2013a) Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and
Forgings
ASTM A487/A487M (1993; R 2012) Standard Specification for Steel
Castings Suitable for Pressure Service
ASTM A489 (2012) Standard Specification for Carbon Steel
Lifting Eyes
ASTM A49 (2012) Standard Specification for Heat Treated
Carbon Steel Joint Bars, Microalloyed Joint Bars
and Forged Carbon Steel Compromise Joint Bars
ASTM A490 (2012) Standard Specification for Structural Bolts,
Alloy Steel, Heat Treated, 150 ksi Minimum Tensile
Strength
ASTM A490M (2012) Standard Specification for High-Strength
Steel Bolts, Classes 10.9 and 10.9.3, for
Structural Steel Joints (Metric)
ASTM A491 (2011) Standard Specification for Aluminum-Coated
Steel Chain-Link Fence Fabric
ASTM A492 (1995; R 2013) Standard Specification for Stainless
Steel Rope Wire
ASTM A499 (1989; R 2008) Standard Specification for Steel
Bars and Shapes, Carbon Rolled from “T” Rails
ASTM A500/A500M (2013) Standard Specification for Cold-Formed
Welded and Seamless Carbon Steel Structural Tubing
in Rounds and Shapes
ASTM A501 (2007) Standard Specification for Hot-Formed Welded
and Seamless Carbon Steel Structural Tubing
ASTM A504/A504M (2008; R 2013) Standard Specification for Wrought
Page 52
Carbon Steel Wheels
ASTM A512 (2006) Standard Specification for Cold-Drawn
Buttweld Carbon Steel Mechanical Tubing
ASTM A513/A513M (2012) Standard Specification for
Electric-Resistance-Welded Carbon and Alloy Steel
Mechanical Tubing
ASTM A514/A514M (2013) Standard Specification for
High-Yield-Strength, Quenched and Tempered Alloy
Steel Plate, Suitable for Welding
ASTM A515/A515M (2010) Standard Specification for Pressure Vessel
Plates, Carbon Steel, for Intermediate- and
Higher-Temperature Service
ASTM A516/A516M (2010) Standard Specification for Pressure Vessel
Plates, Carbon Steel, for Moderate- and
Lower-Temperature Service
ASTM A518/A518M (1999; R 2012) Standard Specification for
Corrosion-Resistant High-Silicon Iron Castings
ASTM A519 (2006) Standard Specification for Seamless Carbon
and Alloy Steel Mechanical Tubing
ASTM A524 (1996; R 2012) Standard Specification for Seamless
Carbon Steel Pipe for Atmospheric and Lower
Temperatures
ASTM A529/A529M (2005; R 2009) Standard Specification for
High-Strength Carbon-Manganese Steel of Structural
Quality
ASTM A53/A53M (2012) Standard Specification for Pipe, Steel,
Black and Hot-Dipped, Zinc-Coated, Welded and
Seamless
ASTM A530/A530M (2012) Standard Specification for General
Requirements for Specialized Carbon and Alloy Steel
Pipe
ASTM A532/A532M (2010) Standard Specification for
Abrasion-Resistant Cast Irons
ASTM A534 (2009) Standard Specification for Carburizing
Steels for Anti-Friction Bearings
ASTM A536 (1984; R 2009) Standard Specification for Ductile
Iron Castings
ASTM A554 (2013) Standard Specification for Welded Stainless
Steel Mechanical Tubing
ASTM A560/A560M (2012) Standard Specification for Castings,
Chromium-Nickel Alloy
Page 53
ASTM A563 (2007a) Standard Specification for Carbon and Alloy
Steel Nuts
ASTM A563M (2007; R 2013) Standard Specification for Carbon
and Alloy Steel Nuts (Metric)
ASTM A564/A564M (2013) Standard Specification for Hot-Rolled and
Cold-Finished Age-Hardening Stainless Steel Bars
and Shapes
ASTM A568/A568M (2013a) Standard Specifications for Steel, Sheet,
Carbon, Structural, and High-Strength, Low-Alloy,
Hot-Rolled and Cold-Rolled, General Requirements for
ASTM A572/A572M (2013a) Standard Specification for High-Strength
Low-Alloy Columbium-Vanadium Structural Steel
ASTM A574 (2013) Standard Specification for Alloy Steel
Socket-Head Cap Screws
ASTM A574M (2012) Standard Specification for Alloy Steel
Socket-Head Cap Screws (Metric)
ASTM A575 (1996; E 2013; R 2013) Standard Specification for
Steel Bars, Carbon, Merchant Quality, M-Grades
ASTM A576 (1990b; R 2012) Standard Specification for Steel
Bars, Carbon, Hot-Wrought, Special Quality
ASTM A580/A580M (2013b) Standard Specification for Stainless Steel
Wire
ASTM A582/A582M (2012; E 2012) Standard Specification for
Free-Machining Stainless Steel Bars
ASTM A586 (2004a; E 2009; R 2009) Standard Specification for
Zinc-Coated Parallel and Helical Steel Wire
Structural Strand and Zinc-Coated Wire for
Spun-In-Place Structural Strand
ASTM A587 (1996; R 2012) Standard Specification for
Electric-Resistance-Welded Low-Carbon Steel Pipe
for the Chemical Industry
ASTM A588/A588M (2010) Standard Specification for High-Strength
Low-Alloy Structural Steel with 50 ksi (345 MPa)
Minimum Yield Point, with Atmospheric Corrosion
Resistance
ASTM A6/A6M (2013a) Standard Specification for General
Requirements for Rolled Structural Steel Bars,
Plates, Shapes, and Sheet Piling
ASTM A603 (1998a; E 2009; R 2009) Standard Specification for
Zinc-Coated Steel Structural Wire Rope
ASTM A606/A606M (2009a) Standard Specification for Steel Sheet and
Page 54
Strip, High-Strength, Low-Alloy, Hot-Rolled and
Cold-Rolled, with Improved Atmospheric Corrosion
Resistance
ASTM A609/A609M (2012) Standard Specification for Castings, Carbon,
Low-Alloy, and Martensitic Stainless Steel,
Ultrasonic Examination Thereof
ASTM A615/A615M (2013) Standard Specification for Deformed and
Plain Carbon-Steel Bars for Concrete Reinforcement
ASTM A618/A618M (2004; R 2010) Standard Specification for
Hot-Formed Welded and Seamless High-Strength
Low-Alloy Structural Tubing
ASTM A627 (2003; R 2011) Standard Specification for
Tool-Resisting Steel Bars, Flats, and Shapes for
Detention and Correctional Facilities
ASTM A632 (2004; R 2009) Standard Specification for Seamless
and Welded Austenitic Stainless Steel Tubing
(Small-Diameter) for General Service
ASTM A633/A633M (2013) Standard Specification for Normalized
High-Strength Low-Alloy Structural Steel Plates
ASTM A641/A641M (2009a) Standard Specification for Zinc-Coated
(Galvanized) Carbon Steel Wire
ASTM A648 (2012) Standard Specification for Steel Wire, Hard
Drawn for Prestressing Concrete Pipe
ASTM A653/A653M (2013) Standard Specification for Steel Sheet,
Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM A659/A659M (2012) Standard Specification for Commercial Steel
(CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25
Maximum Percent), Hot-Rolled
ASTM A666 (2010) Standard Specification for Annealed or
Cold-Worked Austenitic Stainless Steel Sheet,
Strip, Plate and Flat Bar
ASTM A667/A667M (1987; R 2012) Standard Specification for
Centrifugally Cast Dual Metal (Gray and White Cast
Iron) Cylinders
ASTM A668/A668M (2013) Standard Specification for Steel Forgings,
Carbon and Alloy, for General Industrial Use
ASTM A675/A675M (2003; R 2009) Standard Specification for Steel
Bars, Carbon, Hot-Wrought, Special Quality,
Mechanical Properties
ASTM A688/A688M (2012) Standard Specification for Welded Austenitic
Stainless Steel Feedwater Heater Tubes
Page 55
ASTM A690/A690M (2013a) Standard Specification for High-Strength
Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles
and Sheet Piling with Atmospheric Corrosion
Resistance for Use in Marine Environments
ASTM A694/A694M (2013) Standard Specification for Carbon and Alloy
Steel Forgings for Pipe Flanges, Fittings, Valves,
and Parts for High-Pressure Transmission Service
ASTM A702 (2013) Standard Specification for Steel Fence Posts
and Assemblies, Hot Wrought
ASTM A705/A705M (2013) Standard Specification for Age-Hardening
Stainless Steel Forgings
ASTM A706/A706M (2013) Standard Specification for Low-Alloy Steel
Deformed and Plain Bars for Concrete Reinforcement
ASTM A707/A707M (2013) Standard Specification for Forged Carbon and
Alloy Steel Flanges for Low-Temperature Service
ASTM A709/A709M (2013a) Standard Specification for Structural Steel
for Bridges
ASTM A716 (2008) Standard Specification for Ductile Iron
Culvert Pipe
ASTM A722/A722M (2012) Standard Specification for Uncoated
High-Strength Steel Bar for Prestressing Concrete
ASTM A727/A727M (2011) Standard Specification for Carbon Steel
Forgings for Piping Components with Inherent Notch
Toughness
ASTM A733 (2003; E 2009; R 2009) Standard Specification for
Welded and Seamless Carbon Steel and Austenitic
Stainless Steel Pipe Nipples
ASTM A74 (2013a) Standard Specification for Cast Iron Soil
Pipe and Fittings
ASTM A742/A742M (2013) Standard Specification for Steel Sheet,
Metallic Coated and Polymer Precoated for
Corrugated Steel Pipe
ASTM A743/A743M (2013a) Standard Specification for Castings,
Iron-Chromium, Iron-Chromium-Nickel, Corrosion
Resistant, for General Application
ASTM A746 (2009) Standard Specification for Ductile Iron
Gravity Sewer Pipe
ASTM A755/A755M (2011) Standard Specification for Steel Sheet,
Metallic Coated by the Hot-Dip Process and
Prepainted by the Coil-Coating Process for Exterior
Exposed Building Products
Page 56
ASTM A760/A760M (2013) Standard Specification for Corrugated Steel
Pipe, Metallic-Coated for Sewers and Drains
ASTM A762/A762M (2008) Standard Specification for Corrugated Steel
Pipe, Polymer Precoated for Sewers and Drains
ASTM A764 (2007; R 2012) Standard Specification for Metallic
Coated Carbon Steel Wire, Coated at Size and Drawn
to Size for Mechanical Springs
ASTM A767/A767M (2009) Standard Specification for Zinc-Coated
(Galvanized) Steel Bars for Concrete Reinforcement
ASTM A774/A774M (2013) Standard Specification for As-Welded Wrought
Austenitic Stainless Steel Fittings for General
Corrosive Service at Low and Moderate Temperatures
ASTM A775/A775M (2007b) Standard Specification for Epoxy-Coated
Steel Reinforcing Bars
ASTM A778 (2001; E 2009; R 2009) Standard Specification for
Welded, Unannealed Austenitic Stainless Steel
Tubular Products
ASTM A779/A779M (2012) Standard Specification for Steel Strand,
Seven-Wire, Uncoated, Compacted, Stress-Relieved
for Prestressed Concrete
ASTM A780/A780M (2009) Standard Practice for Repair of Damaged and
Uncoated Areas of Hot-Dip Galvanized Coatings
ASTM A786/A786M (2005; R 2009) Standard Specification for
Hot-Rolled Carbon, Low-Alloy, High-Strength
Low-Alloy, and Alloy Steel Floor Plates
ASTM A789/A789M (2013a) Standard Specification for Seamless and
Welded Ferritic/Austenitic Stainless Steel Tubing
for General Service
ASTM A792/A792M (2010) Standard Specification for Steel Sheet, 55%
Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A795/A795M (2013) Standard Specification for Black and
Hot-Dipped Zinc-Coated (Galvanized) Welded and
Seamless Steel Pipe for Fire Protection Use
ASTM A798/A798M (2013) Standard Practice for Installing
Factory-Made Corrugated Steel Pipe for Sewers and
Other Applications
ASTM A807/A807M (2013) Standard Practice for Installing Corrugated
Steel Structural Plate Pipe for Sewers and Other
Applications
ASTM A809 (2008; R 2013) Standard Specification for
Aluminum-Coated (Aluminized) Carbon Steel Wire
Page 57
ASTM A813/A813M (2009) Standard Specification for Single- or
Double-Welded Austenitic Stainless Steel Pipe
ASTM A814/A814M (2008) Standard Specification for Cold-Worked
Welded Austenitic Stainless Steel Pipe
ASTM A815/A815M (2013a) Standard Specification for Wrought
Ferritic, Ferritic/Austenitic, and Martensitic
Stainless Steel Piping Fittings
ASTM A82/A82M (2007) Standard Specification for Steel Wire,
Plain, for Concrete Reinforcement
ASTM A820/A820M (2011) Standard Specification for Steel Fibers for
Fiber-Reinforced Concrete
ASTM A821/A821M (2010) Standard Specification for Steel Wire, Hard
Drawn for Prestressing Concrete Tanks
ASTM A824 (2001; R 2012) Standard Specification for
Metallic-Coated Steel Marcelled Tension Wire for
Use With Chain Link Fence
ASTM A849 (2010) Standard Specification for Post-Applied
Coatings, Pavings, and Linings for Corrugated Steel
Sewer and Drainage Pipe
ASTM A853 (2004; R 2010) Standard Specification for Steel
Wire, Carbon, for General Use
ASTM A856/A856M (2003; R 2009) Standard Specification for Zinc-5%
Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
ASTM A857/A857M (2007; R 2013) Standard Specification for Steel
Sheet Piling, Cold-Formed, Light Gage
ASTM A858/A858M (2013) Standard Specification for Heat-Treated
Carbon Steel Fittings for Low-Temperature and
Corrosive Service
ASTM A861 (2004; R 2013) Standard Specification for
High-Silicon Iron Pipe and Fittings
ASTM A865/A865M (2006; R 2012) Standard Specification for Threaded
Couplings, Steel, Black or Zinc-Coated (Galvanized)
Welded or Seamless, for Use in Steel Pipe Joints
ASTM A879/A879M (2012) Standard Specification for Steel Sheet, zinc
Coated by the Electrolytic Process for Applications
Requiring Designation of the Coating Mass on Each
Surface
ASTM A882/A882M (2004a; R 2010) Standard Specification for Filled
Epoxy-Coated Seven-Wire Prestressing Steel Strand
ASTM A884/A884M (2012) Standard Specification for Epoxy-Coated
Steel Wire and Welded Wire Reinforcement
Page 58
ASTM A886/A886M (2012) Standard Specification for Steel Strand,
Indented, Seven-Wire Stress-Relieved for
Prestressed Concrete
ASTM A888 (2013a) Standard Specification for Hubless Cast
Iron Soil Pipe and Fittings for Sanitary and Storm
Drain, Waste, and Vent Piping Applications
ASTM A898/A898M (2007; R 2012) Standard Specification for Straight
Beam Ultrasonic Examination of Rolled Steel
Structural Shapes
ASTM A90/A90M (2013) Standard Test Method for Weight [Mass] of
Coating on Iron and Steel Articles with Zinc or
Zinc-Alloy Coatings
ASTM A924/A924M (2013) Standard Specification for General
Requirements for Steel Sheet, Metallic-Coated by
the Hot-Dip Process
ASTM A929/A929M (2001; R 2013) Standard Specification for Steel
Sheet, Metallic-Coated by the Hot-Dip Process for
Corrugated Steel Pipe
ASTM A931 (2008; R 2013) Standard Test Method for Tension
Testing of Wire Ropes and Strand
ASTM A934/A934M (2013) Standard Specification for Epoxy-Coated
Prefabricated Steel Reinforcing Bars
ASTM A955/A955M (2012; E 2012) Standard Specification for Deformed
and Plain Stainless-Steel Bars for Concrete
Reinforcement
ASTM A961/A961M (2013) Standard Specification for Common
Requirements for Steel Flanges, Forged Fittings,
Valves, and Parts for Piping Applications
ASTM A966/A966M (2008; R 2012) Standard Test Method for Magnetic
Particle Examination of Steel Forgings Using
Alternating Current
ASTM A974 (1997; R 2011) Standard Specification for Welded
Wire Fabric Gabion and Gabion Mattresses (Metallic
Coated or Polyvinyl Chloride (PVC) Coated)
ASTM A975 (2011) Standard Specification for Double-Twisted
Hexagonal Mesh Gabions and Revet Mattresses
(Metallic-Coated Steel Wire or Metallic-Coated
Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
ASTM A981/A981M (2011) Standard Specification for Evaluating Bond
Strength for 15.2 mm (0.6 in.) Diameter
Prestressing Steel Strand, Grade 270, Uncoated,
Used in Prestressed Ground Anchors
ASTM A990 (2011) Standard Specification for Castings,
Page 59
Iron-Nickel-Chromium and Nickel Alloys, Specially
Controlled for Pressure Retaining Parts for
Corrosive Service
ASTM A992/A992M (2011) Standard Specification for Structural Steel
Shapes
ASTM A996/A996M (2009b) Standard Specification for Rail-Steel and
Axle-Steel Deformed Bars for Concrete Reinforcement
ASTM B1 (2013) Standard Specification for Hard-Drawn Copper
Wire
ASTM B101 (2012) Standard Specification for Lead-Coated
Copper Sheet and Strip for Building Construction
ASTM B103/B103M (2010) Standard Specification for Phosphor Bronze
Plate, Sheet, Strip, and Rolled Bar
ASTM B108/B108M (2012; E 2012) Standard Specification for
Aluminum-Alloy Permanent Mold Castings
ASTM B111/B111M (2011) Standard Specification for Copper and
Copper-Alloy Seamless Condenser Tubes and Ferrule
Stock
ASTM B117 (2011) Standard Practice for Operating Salt Spray
(Fog) Apparatus
ASTM B121/B121M (2011) Standard Specification for Leaded Brass
Plate, Sheet, Strip, and Rolled Bar
ASTM B124/B124M (2013) Standard Specification for Copper and Copper
Alloy Forging Rod, Bar, and Shapes
ASTM B127 (2005; R 2009) Standard Specification for
Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and
Strip
ASTM B135 (2010) Standard Specification for Seamless Brass
Tube
ASTM B135M (2010) Standard Specification for Seamless Brass
Tube (Metric)
ASTM B136 (1984; R 2013) Standard Method for Measurement of
Stain Resistance of Anodic Coatings on Aluminum
ASTM B137 (1995; R 2009) Standard Test Method for Measurement
of Coating Mass Per Unit Area on Anodically Coated
Aluminum
ASTM B138/B138M (2011) Standard Specification for Manganese Bronze
Rod, Bar and Shapes
ASTM B148 (1997; R 2009) Standard Specification for
Aluminum-Bronze Sand Castings
Page 60
ASTM B150/B150M (2012) Standard Specification for Aluminum Bronze
Rod, Bar, and Shapes
ASTM B152/B152M (2013) Standard Specification for Copper Sheet,
Strip, Plate, and Rolled Bar
ASTM B161 (2005; R 2009) Standard Specification for Nickel
Seamless Pipe and Tube
ASTM B163 (2011; E 2012) Standard Specification for Seamless
Nickel and Nickel Alloy Condenser and
Heat-Exchanger Tubes
ASTM B164 (2003; R 2008) Standard Specification for
Nickel-Copper Alloy Rod, Bar, and Wire
ASTM B165 (2005; R 2009) Standard Specification for
Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and
Tube
ASTM B166 (2011) Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601,
N06603, N06690, N06693, N06025, and N06045)* and
Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Rod, Bar, and Wire
ASTM B167 (2011) Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601,
N06603, N06690, N06693, N06025, and N06045)* and
Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Seamless Pipe and Tube
ASTM B168 (2011) Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601,
N06603, N06690, N06693, N06025, and N06045) and
Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Plate, Sheet, and Strip
ASTM B171/B171M (2012) Standard Specification for Copper-Alloy
Plate and Sheet for Pressure Vessels, Condensers
and Heat Exchangers
ASTM B173 (2010) Standard Specification for Rope-Lay-Stranded
Copper Conductors Having Concentric-Stranded
Members, for Electrical Conductors
ASTM B176 (2008; R 2013) Standard Specification for
Copper-Alloy Die Castings
ASTM B177/B177M (2011) Standard Guide for Engineering Chromium
Electroplating
ASTM B179 (2011; E 2013) Standard Specification for Aluminum
Alloys in Ingot and Molten Forms for Castings from
All Casting Processes
ASTM B187/B187M (2011) Standard Specification for Copper, Bus Bar,
Page 61
Rod and Shapes and General Purpose Rod, Bar and
Shapes
ASTM B188 (2010) Standard Specification for Seamless Copper
Bus Pipe and Tube
ASTM B194 (2008) Standard Specification for Copper-Beryllium
Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B2 (2013) Standard Specification for Medium-Hard-Drawn
Copper Wire
ASTM B209 (2010) Standard Specification for Aluminum and
Aluminum-Alloy Sheet and Plate
ASTM B209M (2010) Standard Specification for Aluminum and
Aluminum-Alloy Sheet and Plate (Metric)
ASTM B21/B21M (2012) Standard Specification for Naval Brass Rod,
Bar, and Shapes
ASTM B210 (2012) Standard Specification for Aluminum and
Aluminum-Alloy Drawn Seamless Tubes
ASTM B210M (2012) Standard Specification for Aluminum and
Aluminum-Alloy Drawn Seamless Tubes (Metric)
ASTM B211 (2012) Standard Specification for Aluminum and
Aluminum-Alloy Bar, Rod, and Wire
ASTM B211M (2012; E 2012) Standard Specification for Aluminum
and Aluminum-Alloy Bar, Rod, and Wire (Metric)
ASTM B22/B22M (2013; E 2013) Standard Specification for Bronze
Castings for Bridges and Turntables
ASTM B221 (2013) Standard Specification for Aluminum and
Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles,
and Tubes
ASTM B221M (2013) Standard Specification for Aluminum and
Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles,
and Tubes (Metric)
ASTM B23 (2000; R 2010) Standard Specification for White
Metal Bearing Alloys (known Commercially as
“Babbitt Metal”)
ASTM B230/B230M (2007; R 2012) Standard Specification for Aluminum
1350-H19 Wire for Electrical Purposes
ASTM B231/B231M (2012) Standard Specification for
Concentric-Lay-Stranded Aluminum 1350 Conductors
ASTM B232/B232M (2011) Standard Specification for
Concentric-Lay-Stranded Aluminum Conductors,
Coated-Steel Reinforced (ACSR)
Page 62
ASTM B236 (2007) Standard Specification for Aluminum Bars for
Electrical Purposes (Bus Bars)
ASTM B236M (2007) Standard Specification for Aluminum Bars for
Electrical Purposes (Bus Bars) (Metric)
ASTM B241/B241M (2012; E 2013) Standard Specification for Aluminum
and Aluminum-Alloy Seamless Pipe and Seamless
Extruded Tube
ASTM B244 (2009) Standard Method for Measurement of Thickness
of Anodic Coatings on Aluminum and of Other
Nonconductive Coatings on Nonmagnetic Basis Metals
with Eddy-Current Instruments
ASTM B247 (2009) Standard Specification for Aluminum and
Aluminum-Alloy Die Forgings, Hand Forgings, and
Rolled Ring Forgings
ASTM B247M (2009) Standard Specification for Aluminum and
Aluminum-Alloy Die Forgings, Hand Forgings, and
Rolled Ring Forgings (Metric)
ASTM B251 (2010) General Requirements for Wrought Seamless
Copper and Copper-Alloy Tube
ASTM B251M (2010) General Requirements for Wrought Seamless
Copper and Copper-Alloy Tube (Metric)
ASTM B26/B26M (2012) Standard Specification for Aluminum-Alloy
Sand Castings
ASTM B265 (2013a) Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate
ASTM B271/B271M (2011; E 2013) Standard Specification for
Copper-Base Alloy Centrifugal Castings
ASTM B280 (2013) Standard Specification for Seamless Copper
Tube for Air Conditioning and Refrigeration Field
Service
ASTM B3 (2013) Standard Specification for Soft or Annealed
Copper Wire
ASTM B30 (2012) Standard Specification for Copper Alloys in
Ingot Form
ASTM B302 (2012) Standard Specification for Threadless Copper
Pipe, Standard Sizes
ASTM B306 (2013) Standard Specification for Copper Drainage
Tube (DWV)
ASTM B308/B308M (2010) Standard Specification for Aluminum-Alloy
6061-T6 Standard Structural Profiles
Page 63
ASTM B316/B316M (2010) Standard Specification for Aluminum and
Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
ASTM B317/B317M (2007) Standard Specification for Aluminum-Alloy
Extruded Bar, Rod, Tube, Pipe, and Structural
Profiles for Electrical Purposes (Bus Conductor)
ASTM B32 (2008) Standard Specification for Solder Metal
ASTM B33 (2010) Standard Specification for Tinned Soft or
Annealed Copper Wire for Electrical Purposes
ASTM B333 (2003; R 2008) Standard Specification for
Nickel-Molybdenum Alloy Plate, Sheet, and Strip
ASTM B339 (2012) Standard Specification for Pig Tin
ASTM B344 (2011) Standard Specification for Drawn or Rolled
Nickel-Chromium and Nickel-Chromium-Iron Alloys for
Electrical Heating Elements
ASTM B345/B345M (2011) Standard Specification for Aluminum and
Aluminum-Alloy Seamless Pipe and Seamless Extruded
Tube for Gas and Oil Transmission and Distribution
Piping Systems
ASTM B348 (2013) Standard Specification for Titanium and
Titanium Alloy Bars and Billets
ASTM B36/B36M (2013) Standard Specification for Brass Plate,
Sheet, Strip, and Rolled Bar
ASTM B361 (2008) Standard Specification for Factory-Made
Wrought Aluminum and Aluminum-Alloy Welding Fittings
ASTM B366 (2010a) Standard Specification for Factory-Made
Wrought Nickel and Nickel Alloy Fittings
ASTM B37 (2008; R 2013) Standard Specification for Aluminum
for Use in Iron and Steel Manufacturer
ASTM B370 (2012) Standard Specification for Copper Sheet and
Strip for Building Construction
ASTM B371/B371M (2008; R 2013) Standard Specification for
Copper-Zinc-Silicon Alloy Rod
ASTM B39 (1979; R 2008) Standard Specification for Nickel
ASTM B395/B395M (2013) Standard Specification for U-Bend Seamless
Copper and Copper Alloy Heat Exchanger and
Condenser Tubes
ASTM B398/B398M (2002; R 2013) Standard Specification for
Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
ASTM B399/B399M (2004; R 2010) Standard Specification for
Page 64
Concentric-Lay-Stranded Aluminum-Alloy 6201-T81
Conductors
ASTM B400/B400M (2008; E 2013) Standard Specification for Compact
Round Concentric-Lay-Stranded Aluminum 1350
Conductor
ASTM B418 (2012) Standard Specification for Cast and Wrought
Galvanic Zinc Anodes
ASTM B42 (2010) Standard Specification for Seamless Copper
Pipe, Standard Sizes
ASTM B424 (2011) Standard Specification for Ni-Fe-Cr-Mo-Cu
Alloy (UNS N08825 and UNS N08221)* Plate, Sheet,
and Strip
ASTM B429/B429M (2010; E 2012) Standard Specification for
Aluminum-Alloy Extruded Structural Pipe and Tube
ASTM B43 (2009) Standard Specification for Seamless Red
Brass Pipe, Standard Sizes
ASTM B438 (2013) Standard Specification for Sintered Bronze
Bearings (Oil Impregnated)
ASTM B439 (2008) Standard Specification for Iron-Base
Sintered Bearings (Oil-Impregnated)
ASTM B443 (2000; R 2009) Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS
N06625)and Nickel-Chromium-Molybdenum-Silicon Alloy
(UNS N06219)* Plate, Sheet, and Strip
ASTM B456 (2011; E 2011) Standard Specification for
Electrodeposited Coatings of Copper Plus Nickel
Plus Chromium and Nickel Plus Chromium
ASTM B479 (2006) Standard Specification for Annealed Aluminum
and Aluminum-Alloy Foil for Flexible Barrier, Food
Contact, and Other Applications
ASTM B48 (2000; R 2011) Standard Specification for Soft
Rectangular and Square Bare Copper Wire for
Electrical Conductors
ASTM B496 (2013a) Standard Specification for Compact Round
Concentric-Lay-Stranded Copper Conductors
ASTM B505/B505M (2012a) Standard Specification for Copper-Base
Alloy Continuous Castings
ASTM B517 (2005; R 2009) Standard Specification for Welded
Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603,
UNS N06025, and UNS N06045) Pipe
ASTM B545 (2013) Standard Specification for Electrodeposited
Page 65
Coatings of Tin
ASTM B546 (2004; R 2009) Standard Specification for Electric
Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617),
Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS
N08332),Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe
Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS
N06045) Pipe
ASTM B564 (2011; E 2013) Standard Specification for Nickel
Alloy Forgings
ASTM B574 (2010) Standard Specification for Low-Carbon
Nickel-Molybdenum-Chromium, Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon
Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Copper,Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
ASTM B584 (2013) Standard Specification for Copper Alloy Sand
Castings for General Applications
ASTM B6 (2013) Standard Specification for Zinc
ASTM B609/B609M (2012) Standard Specification for Aluminum 1350
Round Wire, Annealed and Intermediate Tempers, for
Electrical purposes
ASTM B61 (2008; R 2013) Standard Specification for Steam or
Valve Bronze Castings
ASTM B619 (2010; E 2012) Standard Specification for Welded
Nickel and Nickel-Cobalt Alloy Pipe
ASTM B62 (2009) Standard Specification for Composition
Bronze or Ounce Metal Castings
ASTM B622 (2010) Standard Specification for Seamless Nickel
and Nickel-Cobalt Alloy Pipe and Tube
ASTM B632/B632M (2008) Standard Specification for Aluminum-Alloy
Rolled Tread Plate
ASTM B633 (2013) Standard Specification for Electrodeposited
Coatings of Zinc on Iron and Steel
ASTM B650 (1995; R 2013) Standard Specification for
Electrodeposited Engineering Chromium Coatings on
Ferrous Substrates
ASTM B659 (1990; E 2008; R 2008) Standard Guide for Measuring
Thickness of Metallic and Inorganic Coatings
ASTM B68/B68M (2011) Standard Specification for Seamless Copper
Tube, Bright Annealed (Metric)
ASTM B687 (1999; R 2011) Standard Specification for Brass,
Page 66
Copper, and Chromium-Plated Pipe Nipples
ASTM B69 (2013) Standard Specification for Rolled Zinc
ASTM B695 (2004; R 2009) Standard Specification for Coatings
of Zinc Mechanically Deposited on Iron and Steel
ASTM B696 (2000; R 2009) Standard Specification for Coatings
of Cadmium Mechanically Deposited
ASTM B725 (2005; R 2009) Standard Specification for Welded
Nickel (UNS N02200/UNS N02201) and Nickel Copper
Alloy (UNS N04400) Pipe
ASTM B745/B745M (2012) Standard Specification for Corrugated
Aluminum Pipe for Sewers and Drains
ASTM B749 (2003; R 2009) Standard Specification for Lead and
Lead Alloy Strip, Sheet and Plate Products
ASTM B75/B75M (2011) Standard Specification for Seamless Copper
Tube
ASTM B763/B763M (2013; E 2013) Standard Specification for Copper
Alloy Sand Castings for Valve Application
ASTM B766 (1986; R 2008) Standard Specification for
Electrodeposited Coatings of Cadmium
ASTM B775 (2008) General Requirements for Nickel and Nickel
Alloy Welded Pipe
ASTM B8 (2011) Standard Specification for
Concentric-Lay-Stranded Copper Conductors, Hard,
Medium-Hard, or Soft
ASTM B800 (2005; R 2011) Standard Specification for 8000
Series Aluminum Alloy Wire for Electrical
Purposes-Annealed and Intermediate Tempers
ASTM B801 (2007; R 2012) Standard Specification for
Concentric-Lay-Stranded Conductors of 8000 Series
Aluminum Alloy for Subsequent Covering or Insulation
ASTM B806 (2008a) Standard Specification for Copper Alloy
Permanent Mold Castings for General Applications
ASTM B813 (2010) Standard Specification for Liquid and Paste
Fluxes for Soldering of Copper and Copper Alloy Tube
ASTM B819 (2000; R 2011) Standard Specification for Seamless
Copper Tube for Medical Gas Systems
ASTM B823 (2009) Standard Specification for Materials for
Nonferrous Powder Metallurgy (P/M)Structural Parts
ASTM B824 (2011) General Requirements for Copper Alloy
Page 67
Castings
ASTM B828 (2002; R 2010) Standard Practice for Making
Capillary Joints by Soldering of Copper and Copper
Alloy Tube and Fittings
ASTM B829 (2004; R 2009; E 2012) General Requirements for
Nickel and Nickel Alloys Seamless Pipe and Tube
ASTM B837 (2010) Standard Specification for Seamless Copper
Tube for Natural Gas and Liquified Petroleum (LP)
Gas Fuel Distribution Systems
ASTM B843 (2013) Standard Specification for Magnesium Alloy
Anodes for Cathodic Protection
ASTM B85/B85M (2013) Standard Specification for Aluminum-Alloy
Die Castings
ASTM B86 (2013) Standard Specification for Zinc and
Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
ASTM B88 (2009) Standard Specification for Seamless Copper
Water Tube
ASTM B88M (2013) Standard Specification for Seamless Copper
Water Tube (Metric)
ASTM B929 (2005; R 2011; E 2011) Standard Specification for
Copper-Nickel-Tin Spinodal Alloy Rod and Bar
ASTM B98/B98M (2013) Standard Specification for Copper-Silicon
Alloy Rod, Bar, and Shapes
ASTM C1002 (2007; R 2013) Standard Specification for Steel
Self-Piercing Tapping Screws for the Application of
Gypsum Panel Products or Metal Plaster Bases to
Wood Studs or Steel Studs
ASTM C1007 (2011a) Standard Specification for Installation of
Load Bearing (Transverse and Axial) Steel Studs and
Related Accessories
ASTM C1012/C1012M (2013) Standard Test Method for Length Change of
Hydraulic-Cement Mortars Exposed to a Sulfate
Solution
ASTM C1015 (2006; R 2011; R 2011) Standard Practice for
Installation of Cellulosic and Mineral Fiber
Loose-Fill Thermal Insulation
ASTM C1017/C1017M (2007) Standard Specification for Chemical
Admixtures for Use in Producing Flowing Concrete
ASTM C1019 (2013) Standard Test Method for Sampling and
Testing Grout
Page 68
ASTM C1026 (2013) Standard Test Method for Measuring the
Resistance of Ceramic Tile to Freeze-Thaw Cycling
ASTM C1027 (2009) Standard Test Method for Determining Visible
Abrasion Resistance of Glazed Ceramic Tile
ASTM C1032 (2006; R 2011) Standard Specification for Woven
Wire Plaster Base
ASTM C1036 (2010; E 2012) Standard Specification for Flat Glass
ASTM C1040/C1040M (2008; R 2013) Standard Test Methods for In-Place
Density of Unhardened and Hardened Concrete,
Including Roller Compacted Concrete, by Nuclear
Methods
ASTM C1047 (2010a) Standard Specification for Accessories for
Gypsum Wallboard and Gypsum Veneer Base
ASTM C1048 (2012; E 2012) Standard Specification for
Heat-Treated Flat Glass – Kind HS, Kind FT Coated
and Uncoated Glass
ASTM C1053 (2000; R 2010) Standard Specification for
Borosilicate Glass Pipe and Fittings for Drain,
Waste, and Vent (DWV) Applications
ASTM C1059/C1059M (2013) Standard Specification for Latex Agents for
Bonding Fresh to Hardened Concrete
ASTM C1063 (2013) Standard Practice for Installation of
Lathing and Furring to Receive Interior and
Exterior Portland Cement-Based Plaster
ASTM C1064/C1064M (2011) Standard Test Method for Temperature of
Freshly Mixed Hydraulic-Cement Concrete
ASTM C1069 (2009) Standard Test Method for Specific Surface
Area of Alumina or Quartz by Nitrogen Adsorption
ASTM C1071 (2012) Standard Specification for Fibrous Glass
Duct Lining Insulation (Thermal and Sound Absorbing
Material)
ASTM C1072 (2013) Standard Test Method for Measurement of
Masonry Flexural Bond Strength
ASTM C1074 (2011) Standard Practice for Estimating Concrete
Strength by the Maturity Method
ASTM C1077 (2014) Standard Practice for Laboratories Testing
Concrete and Concrete Aggregates for Use in
Construction and Criteria for Laboratory Evaluation
ASTM C1084 (2010) Standard Specification for Portland-Cement
Content of Hardened Hydraulic-Cement Concrete
Page 69
ASTM C1087 (2000; R 2011) Standard Test Method for Determining
Compatibility of Liquid-Applied Sealants with
Accessories Used in Structural Glazing Systems
ASTM C1088 (2013) Standard Specification for Thin Veneer Brick
Units Made From Clay or Shale
ASTM C1089 (2013) Standard Specification for Spun Cast
Prestressed Concrete Poles
ASTM C109/C109M (2013) Standard Test Method for Compressive
Strength of Hydraulic Cement Mortars (Using 2-in.
or (50-mm) Cube Specimens)
ASTM C11 (2013) Standard Terminology Relating to Gypsum and
Related Building Materials and Systems
ASTM C110 (2011) Standard Test Methods for Physical Testing
of Quicklime, Hydrated Lime, and Limestone
ASTM C1103 (2003; R 2009) Standard Practice for Joint
Acceptance Testing of Installed Precast Concrete
Pipe Sewer Lines
ASTM C1103M (2003; R 2009) Standard Practice for Joint
Acceptance Testing of Installed Precast Concrete
Pipe Sewer Lines (Metric)
ASTM C1107/C1107M (2013) Standard Specification for Packaged Dry,
Hydraulic-Cement Grout (Nonshrink)
ASTM C1116/C1116M (2010a) Standard Specification for Fiber-Reinforced
Concrete
ASTM C1126 (2013a) Standard Specification for Faced or Unfaced
Rigid Cellular Phenolic Thermal Insulation
ASTM C1136 (2012) Standard Specification for Flexible, Low
Permeance Vapor Retarders for Thermal Insulation
ASTM C114 (2013) Standard Test Methods for Chemical Analysis
of Hydraulic Cement
ASTM C1140/C1140M (2011) Standard Practice for Preparing and Testing
Specimens from Shotcrete Test Panels
ASTM C1141/C1141M (2008) Standard Specification for Admixtures for
Shotcrete
ASTM C1142 (1995; R 2013) Standard Specification for Extended
Life Mortar for Unit Masonry
ASTM C1147 (2001; R 2012) Standard Practice for Determining
the Short Term Tensile Weld Strength of
Chemical-Resistant Thermoplastics
ASTM C115/C115M (2010; E 2013) Standard Test Method for Fineness of
Page 70
Portland Cement by the Turbidimeter
ASTM C1152/C1152M (2004; E 2012; R 2012) Standard Test Method for
Acid-Soluble Chloride in Mortar and Concrete
ASTM C1153 (2010) Standard Practice for Location of Wet
Insulation in Roofing Systems Using Infrared Imaging
ASTM C1157/C1157M (2011) Standard Specification for Hydraulic Cement
ASTM C1167 (2011) Standard Specification for Clay Roof Tiles
ASTM C117 (2013) Standard Test Method for Materials Finer
than 75-um (No. 200) Sieve in Mineral Aggregates by
Washing
ASTM C1172 (2009; E 2011) Standard Specification for Laminated
Architectural Flat Glass
ASTM C1177/C1177M (2013) Standard Specification for Glass Mat Gypsum
Substrate for Use as Sheathing
ASTM C1178/C1178M (2013) Standard Specification for Glass Mat
Water-Resistant Gypsum Backing Panel
ASTM C1184 (2013) Standard Specification for Structural
Silicone Sealants
ASTM C1186 (2008; R 2012) Standard Specification for Flat
Non-Asbestos Fiber Cement Sheets
ASTM C12 (2013a) Standard Practice for Installing Vitrified
Clay Pipe Lines
ASTM C1202 (2012) Standard Test Method for Electrical
Indication of Concrete’s Ability to Resist Chloride
Ion Penetration
ASTM C1208/C1208M (2011) Standard Specification for Vitrified Clay
Pipe and Joints for Use in Microtunneling,
Sliplining, Pipe Bursting and Tunnels
ASTM C1218/C1218M (1999; R 2008) Standard Specification for
Water-Soluble Chloride in Mortar and Concrete
ASTM C123 (2011) Standard Test Method for Lightweight
Particles in Aggregate
ASTM C123/C123M (2012) Standard Test Method for Lightweight
Particles in Aggregate
ASTM C1231/C1231M (2013) Standard Practice for Use of Unbonded Caps
in Determination of Compressive Strength of
Hardened Concrete Cylinders
ASTM C1240 (2012) Standard Specification for Silica Fume Used
in Cementitious Mixtures
Page 71
ASTM C1244 (2011) Standard Test Method for Concrete Sewer
Manholes by the Negative Air Pressure (Vacuum) Test
Prior to Backfill
ASTM C1244M (2011) Standard Test Method for Concrete Sewer
Manholes by the Negative Air Pressure (Vacuum) Test
Prior to Backfill (Metric)
ASTM C125 (2013b) Standard Terminology Relating to Concrete
and Concrete Aggregates
ASTM C1252 (2006) Standard Test Methods for Uncompacted Void
Content of Fine Aggregate (as Influenced by
Particle Shape, Surface Texture, and Grading)
ASTM C126 (2013) Standard Specification for Ceramic Glazed
Structural Clay Facing Tile, Facing Brick, and
Solid Masonry Units
ASTM C1260 (2007) Standard Test Method for Potential Alkali
Reactivity of Aggregates (Mortar-Bar Method)
ASTM C1262 (2010) Standard Test Method for Evaluating the
Freeze-Thaw Durability of Manufactured Concrete
Masonry Units and Related Concrete Units
ASTM C127 (2012) Standard Test Method for Density, Relative
Density (Specific Gravity), and Absorption of
Coarse Aggregate
ASTM C1278/C1278M (2007a; R 2011) Standard Specification for
Fiber-Reinforced Gypsum Panel
ASTM C128 (2012) Standard Test Method for Density, Relative
Density (Specific Gravity), and Absorption of Fine
Aggregate
ASTM C1289 (2014) Standard Specification for Faced Rigid
Cellular Polyisocyanurate Thermal Insulation Board
ASTM C129 (2011) Standard Specification for Nonloadbearing
Concrete Masonry Units
ASTM C1290 (2011) Standard Specification for Flexible Fibrous
Glass Blanket Insulation Used to Externally
Insulate HVAC Ducts
ASTM C131 (2006) Standard Test Method for Resistance to
Degradation of Small-Size Coarse Aggregate by
Abrasion and Impact in the Los Angeles Machine
ASTM C1311 (2010) Standard Specification for Solvent Release
Agents
ASTM C1315 (2011) Standard Specification for Liquid
Membrane-Forming Compounds Having Special
Properties for Curing and Sealing Concrete
Page 72
ASTM C1324 (2010) Standard Test Method for Examination and
Analysis of Hardened Masonry Mortar
ASTM C1325 (2008b) Standard Specification for Non-Asbestos
Fiber-Mat Reinforced Cement Substrate Sheets
ASTM C1330 (2002; R 2013) Standard Specification for
Cylindrical Sealant Backing for Use with Cold
Liquid-Applied Sealants
ASTM C136 (2006) Standard Test Method for Sieve Analysis of
Fine and Coarse Aggregates
ASTM C1363 (2011) Standard Test Method for Thermal Performance
of Building Materials and Envelope Assemblies by
Means of a Hot Box Apparatus
ASTM C1364 (2010b) Standard Specification for Architectural
Cast Stone
ASTM C1372 (2011) Standard Specification for Dry-Cast
Segmental Retaining Wall Units
ASTM C138/C138M (2013a) Standard Test Method for Density (“Unit
Weight”), Yield, and Air Content (Gravimetric) of
Concrete
ASTM C139 (2011) Standard Specification for Concrete Masonry
Units for Construction of Catch Basins and Manholes
ASTM C1396/C1396M (2013) Standard Specification for Gypsum Board
ASTM C14 (2011) Standard Specification for Concrete Sewer,
Storm Drain, and Culvert Pipe
ASTM C140/C140M (2013a) Standard Test Methods for Sampling and
Testing Concrete Masonry Units and Related Units
ASTM C142/C142M (2010) Standard Test Method for Clay Lumps and
Friable Particles in Aggregates
ASTM C143/C143M (2012) Standard Test Method for Slump of
Hydraulic-Cement Concrete
ASTM C1433 (2014) Standard Specification for Precast
Reinforced Concrete Box Sections for Culverts,
Storm Drains, and Sewers
ASTM C1433M (2013) Standard Specification for Precast
Reinforced Concrete Box Sections for Culverts,
Storm Drains, and Sewers (Metric)
ASTM C1435/C1435M (2008) Standard Practice for Molding
Roller-Compacted Concrete in Cylinder Molds Using a
Vibrating Hammer
ASTM C1438 (2013) Standard Specification for Latex and Powder
Page 73
Polymer Modifiers for Hydraulic Cement Concrete and
Mortar
ASTM C144 (2011) Standard Specification for Aggregate for
Masonry Mortar
ASTM C1452 (2000; R 2006) Standard Specification for
Reinforced Autoclaved Aerated Concrete Elements
ASTM C1478 (2008; R 2013) Standard Specification for Storm
Drain Resilient Connectors Between Reinforced
Concrete Storm Sewer Structures, Pipes and Laterals
ASTM C1478M (2008a; R 2013) Standard Specification for Storm
Drain Resilient Connectors Between Reinforced
Concrete Storm Sewer Structures, Pipes and Laterals
(Metric)
ASTM C1489 (2001; E 2008; R 2008) Standard Specification for
Lime Putty for Structural Purposes
ASTM C14M (2011) Standard Specification for Concrete Sewer,
Storm Drain, and Culvert Pipe (Metric)
ASTM C150/C150M (2012) Standard Specification for Portland Cement
ASTM C151/C151M (2009) Standard Test Method for Autoclave Expansion
of Hydraulic Cement
ASTM C1513 (2013) Standard Specification for Steel Tapping
Screws for Cold-Formed Steel Framing Connections
ASTM C1549 (2009) Standard Test Method for Determination of
Solar Reflectance Near Ambient Temperature Using a
Portable Solar Reflectometer
ASTM C155 (1997; R 2013) Standard Specification for
Insulating Firebrick
ASTM C1567 (2013) Standard Test Method for Potential
Alkali-Silica Reactivity of Combinations of
Cementitious Materials and Aggregate (Accelerated
Mortar-Bar Method)
ASTM C157/C157M (2008) Standard Test Method for Length Change of
Hardened Hydraulic-Cement Mortar and Concrete
ASTM C158 (2002; R 2012) Strength of Glass by Flexure
(Determination of Modulus of Rupture)
ASTM C1581/C1581M (2009a) Standard Test Method for Determining Age at
Cracking and Induced Tensile Stress Characteristics
of Mortar and Concrete under Restrained Shrinkage
ASTM C1585 (2013) Standard Test Method for Measurement of Rate
of Absorption of Water by Hydraulic-Cement Concretes
Page 74
ASTM C159 (2006; R 2011) Standard Specification for Vitrified
Clay Filter Blocks
ASTM C1602/C1602M (2012) Standard Specification for Mixing Water Used
in Production of Hydraulic Cement Concrete
ASTM C1609/C1609M (2012) Standard Test Method for Flexural
Performance of Fiber-Reinforced Concrete (Using
Beam with Third-Point Landing)
ASTM C1610/C1610M (2010) Standard Test Method for Static Segregation
of Self-Consolidating Concrete Using Column
Technique
ASTM C1611/C1611M (2009b; E 2010) Standard Test Method for Slump Flow
of Self-Consolidating Concrete
ASTM C1621/C1621M (2009b) Standard Test Method for Passing Ability of
Self-Consolidating Concrete by J-Ring
ASTM C1629/C1629M (2006; R 2011) Standard Classification for
Abuse-Resistant Nondecorated Interior Gypsum Panel
Products and Fiber-Reinforced Cement Panels
ASTM C1646/C1646M (2008a) Making and Curing Test Specimens for
Evaluating Frost Resistance of Coarse Aggregate in
Air-Entrained Concrete by Rapid Freezing and Thawing
ASTM C165 (2007; R 2012) Standard Test Method for Measuring
Compressive Properties of Thermal Insulations
ASTM C1660 (2010) Standard Specification for Thin-bed Mortar
for Autoclaved Aerated Concrete (AAC) Masonry
ASTM C1688/C1688M (2013) Standard Test Method For Density And Void
Content Of Freshly Mixed Pervious Concrete
ASTM C1693 (2011) Standard Specification for Autoclaved
Aerated Concrete (AAC)
ASTM C1694 (2009) Standard Specification for Reinforced
Autoclaved Aerated Concrete (AAC) Elements
ASTM C170/C170M (2009) Standard Test Method for Compressive
Strength of Dimension Stone
ASTM C171 (2007) Standard Specification for Sheet Materials
for Curing Concrete
ASTM C1710 (2011) Standard Guide for Installation of Flexible
Closed Cell Preformed Insulation in Tube and Sheet
Form
ASTM C172 (2010) Standard Practice for Sampling Freshly Mixed
Concrete
ASTM C172/C172M (2010) Standard Practice for Sampling Freshly Mixed
Page 75
Concrete
ASTM C173/C173M (2012) Standard Test Method for Air Content of
Freshly Mixed Concrete by the Volumetric Method
ASTM C174/C174M (2013) Standard Test Method for Measuring Thickness
of Concrete Elements Using Drilled Concrete Cores
ASTM C177 (2013) Standard Test Method for Steady-State Heat
Flux Measurements and Thermal Transmission
Properties by Means of the Guarded-Hot-Plate
Apparatus
ASTM C183 (2013) Standard Practice for Sampling and the
Amount of Testing of Hydraulic Cement
ASTM C185 (2008) Standard Test Method for Air Content of
Hydraulic Cement Mortar
ASTM C186 (2013) Standard Test Method for Heat of Hydration
of Hydraulic Cement
ASTM C188 (2009) Standard Test Method for Density of
Hydraulic Cement
ASTM C191 (2013) Standard Test Method for Time of Setting
Hydraulic Cement by Vicat Needle
ASTM C192/C192M (2013a) Standard Practice for Making and Curing
Concrete Test Specimens in the Laboratory
ASTM C195 (2007; R 2013) Standard Specification for Mineral
Fiber Thermal Insulating Cement
ASTM C196 (2000; R 2010) Standard Specification for Expanded
or Exfoliated Vermiculite Thermal Insulating Cement
ASTM C203 (2005; R 2012) Breaking Load and Flexural
Properties of Block-Type Thermal Insulation
ASTM C204 (2011) Standard Test Method for Fineness of
Hydraulic Cement by Air Permeability Apparatus
ASTM C206 (2003; R 2009) Standard Specification for Finishing
Hydrated Lime
ASTM C207 (2006; R 2011) Standard Specification for Hydrated
Lime for Masonry Purposes
ASTM C208 (2012) Cellulosic Fiber Insulating Board
ASTM C216 (2013) Facing Brick (Solid Masonry Units Made from
Clay or Shale)
ASTM C220 (1991; R 2009) Standard Specification for Flat
Asbestos-Cement Sheets
Page 76
ASTM C231/C231M (2010) Standard Test Method for Air Content of
Freshly Mixed Concrete by the Pressure Method
ASTM C232/C232M (2013c) Standard Test Methods for Bleeding of
Concrete
ASTM C233/C233M (2011) Standard Test Method for Air-Entraining
Admixtures for Concrete
ASTM C241/C241M (2013) Standard Specification for Abrasion
Resistance of Stone Subjected to Foot Traffic
ASTM C25 (2011) Standard Test Method for Chemical Analysis
of Limestone, Quicklime, and Hydrated Lime
ASTM C260/C260M (2010a) Standard Specification for Air-Entraining
Admixtures for Concrete
ASTM C266 (2013) Standard Test Method for Time of Setting of
Hydraulic-Cement Paste by Gillmore Needles
ASTM C267 (2001; R 2012) Chemical Resistance of Mortars,
Grouts, and Monolithic Surfacings and Polymer
Concretes
ASTM C27 (1998; R 2008) Fireclay and High-Alumina Refractory
Brick
ASTM C270 (2012a) Standard Specification for Mortar for Unit
Masonry
ASTM C272/C272M (2012) Standard Test Method for Water Absorption of
Core Materials for Sandwich Constructions
ASTM C273/C273M (2011) Shear Properties of Sandwich Core Materials
ASTM C28/C28M (2010) Gypsum Plasters
ASTM C286 (1999; R 2009) Standard Terminology Relating to
Porcelain Enamel and Ceramic-Metal Systems
ASTM C289 (2007) Standard Test Method for Potential
Alkali-Silica Reactivity of Aggregates (Chemical
Method)
ASTM C29/C29M (2009) Standard Test Method for Bulk Density (“Unit
Weight”) and Voids in Aggregate
ASTM C294 (2012) Standard Descriptive Nomenclature for
Constituents of Concrete Aggregates
ASTM C295/C295M (2012) Petrographic Examination of Aggregates for
Concrete
ASTM C297/C297M (2004; R 2010) Flatwise Tensile Strength of
Sandwich Constructions
Page 77
ASTM C301 (2013) Vitrified Clay Pipe
ASTM C307 (2003; R 2012) Tensile Strength of
Chemical-Resistant Mortar, Grouts, and Monolithic
Surfacings
ASTM C309 (2011) Standard Specification for Liquid
Membrane-Forming Compounds for Curing Concrete
ASTM C31/C31M (2012) Standard Practice for Making and Curing
Concrete Test Specimens in the Field
ASTM C311/C311M (2013) Sampling and Testing Fly Ash or Natural
Pozzolans for Use as a Mineral Admixture in
Portland-Cement Concrete
ASTM C315 (2007; R 2011) Clay Flue Linings
ASTM C317/C317M (2000; R 2010) Gypsum Concrete
ASTM C32 (2013) Standard Specification for Sewer and Manhole
Brick (Made from Clay or Shale)
ASTM C33/C33M (2013) Standard Specification for Concrete
Aggregates
ASTM C330 (2009) Standard Specification for Lightweight
Aggregates for Structural Concrete
ASTM C330/C330M (2013) Standard Specification for Lightweight
Aggregates for Structural Concrete
ASTM C332 (2009) Lightweight Aggregates for Insulating
Concrete
ASTM C338 (1993; R 2013) Standard Test Method Softening Point
of Glass
ASTM C34 (2013) Structural Clay Load-Bearing Wall Tile
ASTM C35 (2001; R 2009) Inorganic Aggregates for Use in
Gypsum Plaster
ASTM C361 (2014) Standard Specification for Reinforced
Concrete Low-Head Pressure Pipe
ASTM C361M (2012) Standard Specification for Reinforced
Concrete Low-Head Pressure Pipe (Metric)
ASTM C373 (1988; R 2006) Water Absorption, Bulk Density,
Apparent Porosity, and Apparent Specific Gravity of
Fired Whiteware Products
ASTM C387/C387M (2011b) Standard Specification for Packaged, Dry,
Combined Materials for Mortar and Concrete
ASTM C39/C39M (2014) Standard Test Method for Compressive
Page 78
Strength of Cylindrical Concrete Specimens
ASTM C395 (2001; R 2012) Chemical-Resistant Resin Mortars
ASTM C4 (2004; R 2009) Standard Specification for Clay
Drain Tile and Perforated Clay Drain Tile
ASTM C40 (2011) Standard Test Method for Organic Impurities
in Fine Aggregates for Concrete
ASTM C40/C40M (2011) Standard Test Method for Organic Impurities
in Fine Aggregates for Concrete
ASTM C401 (2012) Alumina and Alumina-Silicate Castable
Refractories
ASTM C403/C403M (2008) Standard Test Method for Time of Setting of
Concrete Mixtures by Penetration Resistance
ASTM C404 (2011) Standard Specification for Aggregates for
Masonry Grout
ASTM C406/C406M (2010) Roofing Slate
ASTM C412 (2011) Concrete Drain Tile
ASTM C412M (2011) Concrete Drain Tile (Metric)
ASTM C413 (2011; R 2012) Absorption of Chemical-Resistant
Mortars, Grouts, and Monolithic Surfacings and
Polymer Concretes
ASTM C42/C42M (2013) Standard Test Method for Obtaining and
Testing Drilled Cores and Sawed Beams of Concrete
ASTM C423 (2009a) Sound Absorption and Sound Absorption
Coefficients by the Reverberation Room Method
ASTM C425 (2004; R 2013) Standard Specification for
Compression Joints for Vitrified Clay Pipe and
Fittings
ASTM C430 (2008) Fineness of Hydraulic Cement by the
45-Micrometer (No. 325) Sieve
ASTM C441 (2011) Effectiveness of Pozzolans or Ground
Blast-Furnace Slag in Preventing Excessive
Expansion of Concrete Due to the Alkali-Silica
Reaction
ASTM C443 (2011) Standard Specification for Joints for
Concrete Pipe and Manholes, Using Rubber Gaskets
ASTM C443M (2012) Standard Specification for Joints for
Concrete Pipe and Manholes, Using Rubber Gaskets
(Metric)
Page 79
ASTM C444 (2003; R 2009) Perforated Concrete Pipe
ASTM C444M (2003; R 2009) Perforated Concrete Pipe (Metric)
ASTM C449 (2007; R 2013) Standard Specification for Mineral
Fiber Hydraulic-Setting Thermal Insulating and
Finishing Cement
ASTM C450 (2008) Standard Practice for Fabrication of Thermal
Insulating Fitting Covers for NPS Piping, and
Vessel Lagging
ASTM C451 (2013) Standard Test Method for Early Stiffening of
Hydraulic Cement (Paste Method)
ASTM C457/C457M (2012) Microscopical Determination of Parameters of
the Air-Void System in Hardened Concrete
ASTM C469/C469M (2010) Static Modulus of Elasticity and Poisson’s
Ratio of Concrete in Compression
ASTM C472 (1999; R 2009) Physical Testing of Gypsum, Gypsum
Plasters and Gypsum Concrete
ASTM C473 (2012) Physical Testing of Gypsum Panel Products
ASTM C475/C475M (2012) Joint Compound and Joint Tape for Finishing
Gypsum Board
ASTM C476 (2010) Standard Specification for Grout for Masonry
ASTM C478 (2013) Standard Specification for Precast
Reinforced Concrete Manhole Sections
ASTM C478M (2013) Standard Specification for Precast
Reinforced Concrete Manhole Sections (Metric)
ASTM C481 (1999; R 2011) Standard Test Method Laboratory
Aging of Sandwich Constructions
ASTM C494/C494M (2013) Standard Specification for Chemical
Admixtures for Concrete
ASTM C495 (2007) Compressive Strength of Lightweight
Insulating Concrete
ASTM C495/C495M (2012) Standard Test Method for Compressive
Strength of Lightweight Insulating Concrete
ASTM C496/C496M (2011) Standard Test Method for Splitting Tensile
Strength of Cylindrical Concrete Specimens
ASTM C497 (2013) Concrete Pipe, Manhole Sections, or Tile
ASTM C497M (2013a) Concrete Pipe, Manhole Sections, or Tile
(Metric)
Page 80
ASTM C50/C50M (2013) Sampling, Sample Preparation, Packaging, and
Marking of Lime and Limestone Products
ASTM C501 (1984; R 2009) Relative Resistance to Wear of
Unglazed Ceramic Tile by the Taber Abraser
ASTM C506 (2013a) Standard Specification for Reinforced
Concrete Arch Culvert, Storm Drain, and Sewer Pipe
ASTM C506M (2013) Standard Specification for Reinforced
Concrete Arch Culvert, Storm Drain, and Sewer Pipe
(Metric)
ASTM C507 (2013) Standard Specification for Reinforced
Concrete Elliptical Culvert, Storm Drain, and Sewer
Pipe
ASTM C507M (2013b) Standard Specification for Reinforced
Concrete Elliptical Culvert, Storm Drain, and Sewer
Pipe (Metric)
ASTM C508/C508M (2000; R 2009; E 2010) Asbestos-Cement Underdrain
Pipe
ASTM C509 (2006; R 2011) Elastomeric Cellular Preformed
Gasket and Sealing Material
ASTM C514 (2004; E 2009; R 2009) Standard Specification for
Nails for the Application of Gypsum Board
ASTM C516 (2008) Vermiculite Loose Fill Thermal Insulation
ASTM C518 (2010) Steady-State Thermal Transmission Properties
by Means of the Heat Flow Meter Apparatus
ASTM C531 (2000; R 2012) Linear Shrinkage and Coefficient of
Thermal Expansion of Chemical-Resistant Mortars,
Grouts, and Monolithic Surfacings, and Polymer
Concretes
ASTM C533 (2013) Standard Specification for Calcium Silicate
Block and Pipe Thermal Insulation
ASTM C534/C534M (2013) Standard Specification for Preformed
Flexible Elastomeric Cellular Thermal Insulation in
Sheet and Tubular Form
ASTM C535 (2012) Standard Test Method for Resistance to
Degradation of Large-Size Coarse Aggregate by
Abrasion and Impact in the Los Angeles Machine
ASTM C542 (2005; R 2011) Lock-Strip Gaskets
ASTM C547 (2012) Standard Specification for Mineral Fiber
Pipe Insulation
ASTM C549 (2006; R 2012) Perlite Loose Fill Insulation
Page 81
ASTM C55 (2011) Concrete Brick
ASTM C552 (2013) Standard Specification for Cellular Glass
Thermal Insulation
ASTM C553 (2013) Standard Specification for Mineral Fiber
Blanket Thermal Insulation for Commercial and
Industrial Applications
ASTM C557 (2003; E 2009; R 2009) Adhesives for Fastening
Gypsum Wallboard to Wood Framing
ASTM C564 (2012) Standard Specification for Rubber Gaskets
for Cast Iron Soil Pipe and Fittings
ASTM C566 (2013) Standard Test Method for Total Evaporable
Moisture Content of Aggregate by Drying
ASTM C567/C567M (2011) Determining Density of Structural
Lightweight Concrete
ASTM C578 (2013) Standard Specification for Rigid, Cellular
Polystyrene Thermal Insulation
ASTM C579 (2001; R 2012) Compressive Strength of
Chemical-Resistant Mortars, Grouts, Monolithic
Surfacings, and Polymer Concretes
ASTM C580 (2002; R 2012) Flexural Strength and Modulus of
Elasticity of Chemical-Resistant Mortars, Grouts,
Monolithic Surfacings, and Polymer Concretes
ASTM C581 (2003; E 2008; R 2008) Standard Practice for
Determining Chemical Resistance of Thermosetting
Resins Used in Glass-Fiber-Reinforced Structures,
Intended for Liquid Service
ASTM C582 (2009) Contact-Molded Reinforced Thermosetting
Plastic (RTP) Laminates for Corrosion-Resistant
Equipment
ASTM C585 (2010) Standard Practice for Inner and Outer
Diameters of Thermal Insulation for Nominal Sizes
of Pipe and Tubing
ASTM C587 (2004; R 2009) Gypsum Veneer Plaster
ASTM C59/C59M (2000; R 2011) Gypsum Casting Plaster and Gypsum
Molding Plaster
ASTM C591 (2013) Standard Specification for Unfaced Preformed
Rigid Cellular Polyisocyanurate Thermal Insulation
ASTM C592 (2013) Standard Specification for Mineral Fiber
Blanket Insulation and Blanket-Type Pipe Insulation
(Metal-Mesh Covered) (Industrial Type)
Page 82
ASTM C593 (2006; R 2011) Fly Ash and Other Pozzolans for Use
with Lime for Soil Stabilization
ASTM C595/C595M (2013) Standard Specification for Blended Hydraulic
Cements
ASTM C596 (2009) Drying Shrinkage of Mortar Containing
Hydraulic Cement
ASTM C597 (2009) Pulse Velocity Through Concrete
ASTM C600 (1985; R 2010) Thermal Shock Test on Glass Pipe
ASTM C602 (2013a) Agricultural Liming Materials
ASTM C603 (2004; R 2008) Extrusion Rate and Application Life
of Elastomeric Sealants
ASTM C61/C61M (2000; R 2011) Gypsum Keene’s Cement
ASTM C610 (2011) Standard Specification for Molded Expanded
Perlite Block and Pipe Thermal Insulation
ASTM C612 (2014) Mineral Fiber Block and Board Thermal
Insulation
ASTM C618 (2012a) Standard Specification for Coal Fly Ash and
Raw or Calcined Natural Pozzolan for Use in Concrete
ASTM C62 (2013a) Building Brick (Solid Masonry Units Made
from Clay or Shale)
ASTM C631 (2009) Bonding Compounds for Interior Gypsum
Plastering
ASTM C635/C635M (2013a) Manufacture, Performance, and Testing of
Metal Suspension Systems for Acoustical Tile and
Lay-In Panel Ceilings
ASTM C636/C636M (2013) Standard Practice for Installation of Metal
Ceiling Suspension Systems for Acoustical Tile and
Lay-In Panels
ASTM C639 (2001; R 2011) Rheological (Flow) Properties of
Elastomeric Sealants
ASTM C641 (2009) Staining Materials in Lightweight Concrete
Aggregates
ASTM C642 (2013) Density, Absorption, and Voids in Hardened
Concrete
ASTM C645 (2013) Nonstructural Steel Framing Members
ASTM C647 (2008; R 2013) Properties and Tests of Mastics and
Coating Finishes for Thermal Insulation
Page 83
ASTM C648 (2004; R 2009) Breaking Strength of Ceramic Tile
ASTM C652 (2013) Hollow Brick (Hollow Masonry Units Made from
Clay or Shale)
ASTM C654 (2011) Porous Concrete Pipe
ASTM C654M (2011) Porous Concrete Pipe (Metric)
ASTM C655 (2014) Reinforced Concrete D-Load Culvert, Storm
Drain, and Sewer Pipe
ASTM C658 (1998; R 2012) Chemical-Resistant Resin Grouts for
Brick or Tile
ASTM C661 (2006; R 2011) Indentation Hardness of
Elastomeric-Type Sealants by Means of a Durometer
ASTM C665 (2012) Mineral-Fiber Blanket Thermal Insulation for
Light Frame Construction and Manufactured Housing
ASTM C666/C666M (2003; R 2008) Resistance of Concrete to Rapid
Freezing and Thawing
ASTM C67 (2013a) Standard Test Methods for Sampling and
Testing Brick and Structural Clay Tile
ASTM C672/C672M (2012) Scaling Resistance of Concrete Surfaces
Exposed to Deicing Chemicals
ASTM C679 (2003; E 2009; R 2009) Tack-Free Time of
Elastomeric Sealants
ASTM C684 (1999; R 2003) Making, Accelerated Curing, and
Testing Concrete Compression Test Specimens
ASTM C685/C685M (2011) Concrete Made by Volumetric Batching and
Continuous Mixing
ASTM C70 (2013) Standard Test Method for Surface Moisture in
Fine Aggregate
ASTM C700 (2013) Standard Specification for Vitrified Clay
Pipe, Extra Strength, Standard Strength, and
Perforated
ASTM C702/C702M (2011) Reducing Samples of Aggregate to Testing Size
ASTM C719 (2013) Adhesion and Cohesion of Elastomeric Joint
Sealants Under Cyclic Movement (Hockman Cycle)
ASTM C722 (2004; R 2012) Standard Specification for
Chemical-Resistant Resin Monolithic Surfacings
ASTM C726 (2012) Mineral Fiber Roof Insulation Board
ASTM C728 (2013) Perlite Thermal Insulation Board
Page 84
ASTM C73 (2010) Calcium Silicate Brick (Sand-Lime Brick)
ASTM C732 (2006; R 2012) Aging Effects of Artificial
Weathering on Latex Sealants
ASTM C734 (2006; R 2012) Low-Temperature Flexibility of Latex
Sealants After Artificial Weathering
ASTM C739 (2011) Cellulosic Fiber Loose-Fill Thermal
Insulation
ASTM C744 (2011) Prefaced Concrete and Calcium Silicate
Masonry Units
ASTM C754 (2011) Installation of Steel Framing Members to
Receive Screw-Attached Gypsum Panel Products
ASTM C76 (2014) Standard Specification for Reinforced
Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM C764 (2011) Mineral Fiber Loose-Fill Thermal Insulation
ASTM C76M (2013a) Standard Specification for Reinforced
Concrete Culvert, Storm Drain, and Sewer Pipe
(Metric)
ASTM C779/C779M (2012) Abrasion Resistance of Horizontal Concrete
Surfaces
ASTM C78/C78M (2012; E 2013) Standard Test Method for Flexural
Strength of Concrete (Using Simple Beam with
Third-Point Loading)
ASTM C780 (2012a) Preconstruction and Construction Evaluation
of Mortars for Plain and Reinforced Unit Masonry
ASTM C792 (2004; R 2008) Effects of Heat Aging on Weight
Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C793 (2005; R 2010) Effects of Accelerated Weathering on
Elastomeric Joint Sealants
ASTM C795 (2008; R 2013) Standard Specification for Thermal
Insulation for Use in Contact with Austenitic
Stainless Steel
ASTM C796 (2004) Foaming Agents for Use in Producing Cellular
Concrete Using Preformed Foam
ASTM C796/C796M (2012) Standard Test Method for Foaming Agents for
Use in Producing Cellular Concrete Using Preformed
Foam
ASTM C803/C803M (2003; R 2010) Penetration Resistance of Hardened
Concrete
ASTM C805/C805M (2013a) Rebound Number of Hardened Concrete
Page 85
ASTM C823/C823M (2012) Examination and Sampling of Hardened
Concrete in Construction
ASTM C827/C827M (2010) Change in Height at Early Ages of
Cylindrical Specimens from Cementitious Mixtures
ASTM C828 (2011) Low-Pressure Air Test of Vitrified Clay Pipe
Lines
ASTM C834 (2010) Latex Sealants
ASTM C836/C836M (2012) High Solids Content, Cold Liquid-Applied
Elastomeric Waterproofing Membrane for Use With
Separate Wearing Course
ASTM C840 (2013) Application and Finishing of Gypsum Board
ASTM C841 (2003; R 2013) Installation of Interior Lathing and
Furring
ASTM C842 (2005; E 2010; R 2010) Application of Interior
Gypsum Plaster
ASTM C843 (1999; R 2012) Application of Gypsum Veneer Plaster
ASTM C844 (2004; R 2010) Application of Gypsum Base to
Receive Gypsum Veneer Plaster
ASTM C847 (2012) Standard Specification for Metal Lath
ASTM C856 (2013) Petrographic Examination of Hardened Concrete
ASTM C857 (2013) Standard Practice for Minimum Structural
Design Loading for Underground Precast Concrete
Utility Structures
ASTM C864 (2005; R 2011) Dense Elastomeric Compression Seal
Gaskets, Setting Blocks, and Spacers
ASTM C869/C869M (2011) Foaming Agents Used in Making Preformed Foam
for Cellular Concrete
ASTM C87/C87M (2010) Effect of Organic Impurities in Fine
Aggregate on Strength of Mortar
ASTM C877 (2008) External Sealing Bands for Concrete Pipe,
Manholes, and Precast Box Sections
ASTM C877M (2002; R 2009) External Sealing Bands for Concrete
Pipe, Manholes, and Precast Box Sections (Metric)
ASTM C88 (2013) Standard Test Method for Soundness of
Aggregates by Use of Sodium Sulfate or Magnesium
Sulfate
ASTM C881/C881M (2013) Standard Specification for Epoxy-Resin-Base
Bonding Systems for Concrete
Page 86
ASTM C882/C882M (2013a) Bond Strength of Epoxy-Resin Systems Used
with Concrete by Slant Shear
ASTM C884/C884M (1998; R 2010) Thermal Compatibility between
Concrete and Epoxy-Resin Overlay
ASTM C891 (2011) Installation of Underground Precast Concrete
Utility Structures
ASTM C897 (2005; R 2009) Aggregate for Job-Mixed Portland
Cement-Based Plasters
ASTM C90 (2014) Loadbearing Concrete Masonry Units
ASTM C91/C91M (2012) Standard Specification for Masonry Cement
ASTM C916 (1985; R 2007) Standard Specification for Adhesives
for Duct Thermal Insulation
ASTM C919 (2012) Use of Sealants in Acoustical Applications
ASTM C920 (2011) Standard Specification for Elastomeric Joint
Sealants
ASTM C921 (2010) Standard Practice for Determining the
Properties of Jacketing Materials for Thermal
Insulation
ASTM C923 (2008; R 2013) Standard Specification for Resilient
Connectors Between Reinforced Concrete Manhole
Structures, Pipes and Laterals
ASTM C923M (2008b; R 2013) Standard Specification for
Resilient Connectors Between Reinforced Concrete
Manhole Structures, Pipes and Laterals (Metric)
ASTM C924 (2002; R 2009) Testing Concrete Pipe Sewer Lines by
Low-Pressure Air Test Method
ASTM C924M (2002; R 2009) Testing Concrete Pipe Sewer Liner by
Low-Pressure Air Test Method (Metric)
ASTM C926 (2013a) Application of Portland Cement-Based Plaster
ASTM C928/C928M (2013) Packaged, Dry, Rapid-Hardening Cementitious
Materials for Concrete Repairs
ASTM C930 (2012) Potential Health and Safety Concerns
Associated with Thermal Insulation Materials and
Accessories
ASTM C933 (2013) Welded Wire Lath
ASTM C936/C936M (2013) Standard Specification for Solid Concrete
Interlocking Paving Units
ASTM C937 (2010) Grout Fluidifier for Preplaced-Aggregate
Page 87
Concrete
ASTM C938 (2010) Proportioning Grout Mixtures for
Preplaced-Aggregate Concrete
ASTM C939 (2010) Flow of Grout for Preplaced-Aggregate
Concrete (Flow Cone Method)
ASTM C94/C94M (2014) Standard Specification for Ready-Mixed
Concrete
ASTM C940 (2010a) Expansion and Bleeding of Freshly Mixed
Grouts for Preplaced-Aggregate Concrete in the
Laboratory
ASTM C942 (2010) Compressive Strength of Grouts for
Preplaced-Aggregate Concrete in the Laboratory
ASTM C943 (2010) Making Test Cylinders and Prisms for
Determining Strength and Density of
Preplaced-Aggregate Concrete in the Laboratory
ASTM C944/C944M (2012) Standard Test Method for Abrasion Resistance
of Concrete or Mortar Surfaces by the
Rotating-Cutter Method
ASTM C953 (2010) Time of Setting of Grouts for
Preplaced-Aggregate Concrete in the Laboratory
ASTM C954 (2011) Steel Drill Screws for the Application of
Gypsum Panel Products or Metal Plaster Bases to
Steel Studs from 0.033 in. (0.84 mm) to 0.112 in.
(2.84 mm) in Thickness
ASTM C955 (2011c) Load-Bearing (Transverse and Axial) Steel
Studs, Runners (Tracks), and Bracing or Bridging
for Screw Application of Gypsum Panel Products and
Metal Plaster Bases
ASTM C969 (2002; R 2009) Standard Practice for Infiltration
and Exfiltration Acceptance Testing of Installed
Precast Concrete Pipe Sewer Lines
ASTM C969M (2002; R 2009) Standard Practice for Infiltration
and Exfiltration Acceptance Testing of Installed
Precast Concrete Pipe Sewer Lines (Metric)
ASTM C97/C97M (2009) Absorption and Bulk Specific Gravity of
Dimension Stone
ASTM C972 (2000; R 2011) Compression-Recovery of Tape Sealant
ASTM C977 (2010) Quicklime and Hydrated Lime for Soil
Stabilization
ASTM C979/C979M (2010) Pigments for Integrally Colored Concrete
Page 88
ASTM C989/C989M (2013) Standard Specification for Slag Cement for
Use in Concrete and Mortars
ASTM C990 (2009) Standard Specification for Joints for
Concrete Pipe, Manholes and Precast Box Sections
Using Preformed Flexible Joint Sealants
ASTM C990M (2009) Standard Specification for Joints for
Concrete Pipe, Manholes and Precast Box Sections
Using Preformed Flexible Joint Sealants (Metric)
ASTM C991 (2008; E 2008) Flexible Glass Fiber Insulation for
Metal Buildings
ASTM D1002 (2010) Apparent Shear Strength of Single-Lap-Joint
Adhesively Bonded Metal Specimens by Tension
Loading (Metal-to-Metal)
ASTM D1003 (2013) Haze and Luminous Transmittance of
Transparent Plastics
ASTM D1004 (2013) Initial Tear Resistance of Plastic Film and
Sheeting
ASTM D1037 (2012) Evaluating Properties of Wood-Base Fiber and
Particle Panel Materials
ASTM D1044 (2013) Resistance of Transparent Plastics to
Surface Abrasion
ASTM D1045 (2008) Sampling and Testing Plasticizers Used in
Plastics
ASTM D1047 (2011) Poly(Vinyl Chloride) Jacket for Wire and
Cable
ASTM D1052 (2009) Measuring Rubber Deterioration-Cut Growth
Using Ross Flexing Apparatus
ASTM D1054 (2002; R 2007) Rubber Property – Resilience Using a
Rebound Pendulum
ASTM D1056 (2007) Standard Specification for Flexible Cellular
Materials – Sponge or Expanded Rubber
ASTM D1066 (2011) Sampling Steam
ASTM D1073 (2011) Fine Aggregate for Bituminous Paving Mixtures
ASTM D1139/D1139M (2009) Aggregate for Single or Multiple Bituminous
Surface Treatments
ASTM D1140 (2000; R 2006) Amount of Material in Soils Finer
than the No. 200 (75-micrometer) Sieve
ASTM D1143/D1143M (2007; R 2013) Piles Under Static Axial Compressive
Load
Page 89
ASTM D1148 (2013) Standard Test Method for Rubber
Deterioration—Discoloration from Ultraviolet (UV)
and Heat Exposure of Light-Colored Surfaces
ASTM D1149 (2007; R 2012) Standard Test Method for Rubber
Deterioration – Surface Ozone Cracking in a Chamber
ASTM D1152 (2006; R 2012) Methanol (Methyl Alcohol)
ASTM D1153 (2012) Methyl Isobutyl Ketone
ASTM D117 (2010) Standard Guide for Sampling, Test Methods,
Specifications and Guide for Electrical Insulating
Oils of Petroleum Origin
ASTM D1171 (1999; R 2007) Rubber Deterioration – Surface Ozone
Cracking Outdoors or Chamber (Triangular Specimens)
ASTM D1177 (2012) Freezing Point of Aqueous Engine Coolants
ASTM D1179 (2010) Fluoride Ion in Water
ASTM D1187/D1187M (1997; E 2011; R 2011) Asphalt-Base Emulsions for
Use as Protective Coatings for Metal
ASTM D1188 (2007; E 2010) Bulk Specific Gravity and Density of
Compacted Bituminous Mixtures Using Paraffin-Coated
Specimens
ASTM D1200 (2010) Viscosity by Ford Viscosity Cup
ASTM D1203 (2010) Volatile Loss from Plastics Using Activated
Carbon Methods
ASTM D1204 (2008) Linear Dimensional Changes of Nonrigid
Thermoplastic Sheeting or Film at Elevated
Temperature
ASTM D1210 (2005; R 2010) Fineness of Dispersion of
Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D1220 (1965; R 1990) Measurement and Calibration of
Upright Cylindrical Tanks
ASTM D1227 (2013) Emulsified Asphalt Used as a Protective
Coating for Roofing
ASTM D123 (2013a) Terminology Relating to Textiles
ASTM D1238 (2013) Melt Flow Rates of Thermoplastics by
Extrusion Plastometer
ASTM D1241 (2007) Materials for Soil-Aggregate Subbase, Base,
and Surface Courses
ASTM D1248 (2012) Standard Specification for Polyethylene
Plastics Extrusion Materials for Wire and Cable
Page 90
ASTM D1250 (2008) Standard Guide for Use of the Petroleum
Measurement Tables
ASTM D13 (2002) Standard Specification for Spirits of
Turpentine
ASTM D130 (2012) Standard Test Method for Corrosiveness to
Copper from Petroleum Products by Copper Strip Test
ASTM D1308 (2013) Effect of Household Chemicals on Clear and
Pigmented Organic Finishes
ASTM D1310 (2001; R 2007) Flash Point and Fire Point of
Liquids by Tag Open-Cup Apparatus
ASTM D1327/D1327M (2004e1; R 2012) Standard Specification for
Bitumen-Saturated Woven Burlap Fabrics Used in
Roofing and Waterproofing
ASTM D1330 (2004; R 2010) Rubber Sheet Gaskets
ASTM D1335 (2012) Standard Test Method for Tuft Bind of Pile
Yarn Floor Coverings
ASTM D1384 (2005; R 2012) Corrosion Test for Engine Coolants
in Glassware
ASTM D140/D140M (2009) Standard Practice for Sampling Bituminous
Materials
ASTM D1401 (2012) Standard Test Method for Water Separability
of Petroleum Oils and Synthetic Fluids
ASTM D1418 (2010a) Rubber and Rubber Lattices – Nomenclature
ASTM D1429 (2013) Specific Gravity of Water and Brine
ASTM D1435 (2013) Standard Practice for Outdoor Weathering of
Plastics
ASTM D1452 (2009) Soil Investigation and Sampling by Auger
Borings
ASTM D146/D146M (2004; E 2012; R 2012) Sampling and Testing
Bitumen-Saturated Felts and Woven Fabrics for
Roofing and Waterproofing
ASTM D1461 (2011) Moisture or Volatile Distillates in
Bituminous Paving Mixtures
ASTM D1474 (2008) Standard Test Method for Indentation
Hardness of Organic Coatings
ASTM D1475 (2013) Standard Test Method for Density of Liquid
Coatings, Inks, and Related Products
ASTM D149 (2009; R 2013) Dielectric Breakdown Voltage and
Page 91
Dielectric Strength of Solid Electrical Insulating
Materials at Commercial Power Frequencies
ASTM D1499 (2013) Filtered Open-Flame Carbon-Arc Type
Exposures of Plastics
ASTM D1505 (2010) Density of Plastics by the Density-Gradient
Technique
ASTM D1525 (2009) Vicat Softening Temperature of Plastics
ASTM D1527 (1999; R 2005) Standard Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe,
Schedules 40 and 80
ASTM D153 (1984; R 2008) Specific Gravity of Pigments
ASTM D1533 (2012) Standard Test Method for Water in Insulating
Liquids by Coulometric Karl Fischer Titration
ASTM D1535 (2013) Specifying Color by the Munsell System
ASTM D1544 (2004; R 2010) Standard Test Method for Color of
Transparent Liquids (Gardner Color Scale)
ASTM D1556 (2007) Density and Unit Weight of Soil in Place by
the Sand-Cone Method
ASTM D1557 (2012) Standard Test Methods for Laboratory
Compaction Characteristics of Soil Using Modified
Effort (56,000 ft-lbf/ft3) (2700 kN-m/m3)
ASTM D1559 (1989) Resistance to Plastic Flow of Bituminous
Mixtures Using Marshall Apparatus
ASTM D1560 (2009a) Resistance to Deformation and Cohesion of
Bituminous Mixtures by Means of Hveem Apparatus
ASTM D1586 (2011) Penetration Test and Split-Barrel Sampling
of Soils
ASTM D1587 (2008; E 2012; R 2012) Thin-Walled Tube Sampling of
Soils for Geotechnical Purposes
ASTM D1593 (2009) Standard Specification for Nonrigid Vinyl
Chloride Plastic Film and Sheeting
ASTM D1598 (2002; R 2009) Time-to-Failure of Plastic Pipe
Under Constant Internal Pressure
ASTM D1599 (1999; R 2011) Resistance to Short-Time Hydraulic
Failure Pressure of Plastic Pipe, Tubing, and
Fittings
ASTM D1603 (2012) Carbon Black Content in Olefin Plastics
ASTM D1621 (2010) Compressive Properties of Rigid Cellular
Page 92
Plastics
ASTM D1622 (2008) Apparent Density of Rigid Cellular Plastics
ASTM D1623 (2009) Tensile and Tensile Adhesion Properties of
Rigid Cellular Plastics
ASTM D1625 (1971; R 2000) Standard Specifications for
Chromated Copper Arsenate
ASTM D1630 (2006; R 2012) Rubber Property – Abrasion
Resistance (Footware Abrader)
ASTM D1632 (2007) Making and Curing Soil-Cement Compression
and Flexure Test Specimens in the Laboratory
ASTM D1633 (2000; R 2007) Compressive Strength of Molded
Soil-Cement Cylinders
ASTM D1640 (2003; R 2009) Drying, Curing, or Film Formation of
Organic Coatings at Room Temperature
ASTM D1652 (2011; E 2012) Standard Test Method for Epoxy
Content of Epoxy Resins
ASTM D1653 (2013) Water Vapor Transmission of Organic Coating
Films
ASTM D1654 (2008) Evaluation of Painted or Coated Specimens
Subjected to Corrosive Environments
ASTM D1667 (2005; R 2011) Flexible Cellular Materials – Poly
(Vinyl Chloride) Foam (Closed-Cell)
ASTM D1668 (1997a; R 2006) Glass Fabrics (Woven and Treated)
for Roofing and Waterproofing
ASTM D1682 (1964; R 1975e1) Test for Breaking Load and
Elongation of Textile Fabrics
ASTM D1693 (2013) Standard Test Method for Environmental
Stress-Cracking of Ethylene Plastics
ASTM D1710 (2008) Extruded and Compression Molded
Polytetrafluoroethylene (PTFE) Rod and Heavy-Walled
Tubing
ASTM D173/D173M (2003; R 2011; E 2012) Bitumen-Saturated Cotton
Fabrics Used in Roofing and Waterproofing
ASTM D1730 (2009) Standard Practices for Preparation of
Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D1751 (2004; E 2013; R 2013) Standard Specification for
Preformed Expansion Joint Filler for Concrete
Paving and Structural Construction (Nonextruding
and Resilient Bituminous Types)
Page 93
ASTM D1752 (2004a; R 2013) Standard Specification for
Preformed Sponge Rubber Cork and Recycled PVC
Expansion
ASTM D1763 (2000; R 2013) Epoxy Resins
ASTM D1777 (1996; E 2011; R 2011) Thickness of Textile
Materials
ASTM D1784 (2011) Standard Specification for Rigid Poly(Vinyl
Chloride) (PVC) Compounds and Chlorinated
Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D1785 (2012) Standard Specification for Poly(Vinyl
Chloride) (PVC), Plastic Pipe, Schedules 40, 80,
and 120
ASTM D1790 (2008) Brittleness Temperature of Plastic Sheeting
by Impact
ASTM D1856 (2009) Recovery of Asphalt from Solution by Abson
Method
ASTM D1863/D1863M (2005; R 2011; E 2012) Mineral Aggregate Used on
Built-Up Roofs
ASTM D1864/D1864M (1989; E 2009; R 2009) Moisture in Mineral
Aggregate Used on Built-Up Roofs
ASTM D1876 (2008) Standard Test Method for Peel Resistance of
Adhesives (T-Peel Test)
ASTM D1883 (2007; E 2009; E 2009) CBR (California Bearing
Ratio) of Laboratory-Compacted Soils
ASTM D1894 (2011; E 2011) Static and Kinetic Coefficients of
Friction of Plastic Film and Sheeting
ASTM D1922 (2009) Propagation Tear Resistance of Plastic Film
and Thin Sheeting by Pendulum Method
ASTM D1927 (1981; R 1988) Rigid Poly(Vinyl Chloride) Plastic
Sheet
ASTM D1929 (2013a) Standard Test Method for Determining
Ignition Temperature of Plastics
ASTM D1970/D1970M (2013a) Self-Adhering Polymer Modified Bituminous
Sheet Materials Used as Steep Roofing Underlayment
for Ice Dam Protection
ASTM D1972 (1997; R 2005) Standard Practice for Generic
Marking of Plastic Products
ASTM D198 (2013) Standard Test Methods of Static Tests of
Lumber in Structural Sizes
Page 94
ASTM D1998 (2013) Polyethylene Upright Storage Tanks
ASTM D2000 (2012) Standard Classification System for Rubber
Products in Automotive Applications
ASTM D202 (2008) Sampling and Testing Untreated Paper Used
for Electrical Insulation
ASTM D2026/D2026M (1997; E 2010; R 2010) Cutback Asphalt (Slow-Curing
Type)
ASTM D2027/D2027M (2013) Cutback Asphalt (Medium-Curing Type)
ASTM D2028/D2028M (2010) Cutback Asphalt (Rapid-Curing Type)
ASTM D2035 (2013) Standard Practice for
Coagulation-Flocculation Jar Test of Water
ASTM D2041/D2041M (2011) Theoretical Maximum Specific Gravity and
Density of Bituminous Paving Mixtures
ASTM D2047 (2011) Static Coefficient of Friction of
Polish-Coated Floor Surfaces as Measured by the
James Machine
ASTM D2103 (2010) Standard Specification for Polyethylene Film
and Sheeting
ASTM D2104 (2003) Standard Specification for Polyethylene (PE)
Plastic Pipe, Schedule 40
ASTM D2113 (2008) Rock Core Drilling and Sampling of Rock for
Site Investigation
ASTM D2122 (1998; R 2010) Determining Dimensions of
Thermoplastic Pipe and Fittings
ASTM D2126 (2009) Response of Rigid Cellular Plastics to
Thermal and Humid Aging
ASTM D2136 (2002; R 2012) Coated Fabrics – Low-Temperature
Bend Test
ASTM D2167 (2008) Density and Unit Weight of Soil in Place by
the Rubber Balloon Method
ASTM D217 (2010) Cone Penetration of Lubricating Grease
ASTM D2170/D2170M (2010) Kinematic Viscosity of Asphalts (Bitumens)
ASTM D2171/D2171M (2010) Viscosity of Asphalts by Vacuum Capillary Viscometer
ASTM D2172/D2172M (2011) Quantitative Extraction of Bitumen from Bituminous Paving Mixtures
ASTM D2176 (1997a; R 2007) Folding Endurance of Paper by the M.I.T. Tester
ASTM D2178/D2178M (2013a) Asphalt Glass Felt Used in Roofing and Waterproofing
ASTM D2186 (2005; R 2009) Deposit-Forming Impurities in Steam
ASTM D2216 (2010) Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
ASTM D2217 (1985; R 1998) Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM D2235 (2004; R 2011) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
ASTM D2239 (2012) Standard Specification for Polyethylene (PE)
Plastic Pipe (SIDR-PR) Based on Controlled Inside
Diameter
ASTM D2240 (2005; R 2010) Standard Test Method for Rubber
Property – Durometer Hardness
ASTM D2241 (2009) Standard Specification for Poly(Vinyl
Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D2244 (2011) Calculation of Color Tolerances and Color
Differences from Instrumentally Measured Color
Coordinates
ASTM D2247 (2011) Testing Water Resistance of Coatings in 100%
Relative Humidity
ASTM D226/D226M (2009) Standard Specification for Asphalt-Saturated
Organic Felt Used in Roofing and Waterproofing
ASTM D2261 (2013) Tearing Strength of Fabrics by the Tongue
(Single Rip) Procedure (Constant Rate-of-Extension
Tensile Testing Machine)
ASTM D227/D227M (2003; R 2011; E 2012) Coal-Tar-Saturated Organic
Felt Used in Roofing and Waterproofing
ASTM D2270 (2010; E 2011) Standard Practice for Calculating
Viscosity Index from Kinematic Viscosity at 40 and
100°C
ASTM D2272 (2011) Standard Test Method for Oxidation Stability
of Steam Turbine Oils by Rotating Pressure Vessel
ASTM D2287 (2012) Nonrigid Vinyl Chloride Polymer and
Copolymer Molding and Extrusion Compounds
ASTM D229 (2013) Rigid Sheet and Plate Materials Used for
Electrical Insulation
Page 96
ASTM D2308 (2007; R 2013) Standard Specification for
Thermoplastic Polyethylene Jacket for Electrical
Wire and Cable
ASTM D2310 (2006; R 2012) Machine-Made “Fiberglass”
(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2321 (2011) Standard Practice for Underground
Installation of Thermoplastic Pipe for Sewers and
Other Gravity-Flow Applications
ASTM D2344/D2344M (2013) Standard Test Method for Short-Beam Strength
of Polymer Matrix Composite Materials and Their
Laminates
ASTM D235 (2002; R 2012) Mineral Spirits (Petroleum Spirits)
(Hydrocarbon Dry Cleaning Solvent)
ASTM D2369 (2010; E 2011) Volatile Content of Coatings
ASTM D2370 (1998; R 2010) Tensile Properties of Organic
Coatings
ASTM D2394 (2005; R 2011) Simulated Service Testing of Wood
and Wood-Base Finish Flooring
ASTM D2397/D2397M (2013) Standard Specification for Cationic
Emulsified Asphalt
ASTM D2412 (2011) Determination of External Loading
Characteristics of Plastic Pipe by Parallel-Plate
Loading
ASTM D2419 (2009) Sand Equivalent Value of Soils and Fine
Aggregate
ASTM D242/D242M (2009) Mineral Filler for Bituminous Paving Mixtures
ASTM D2434 (1968; R 2006) Permeability of Granular Soils
(Constant Head)
ASTM D244 (2009) Emulsified Asphalts
ASTM D2447 (2003) Standard Specification for Polyethylene (PE)
Plastic Pipe, Schedules 40 and 80, Based on Outside
Diameter
ASTM D2452 (2003; R 2009) Standard Test Method for
Extrudability of Oil- and Resin-Base Caulking
Compounds
ASTM D2453 (2003; R 2009) Standard Test Method for Shrinkage
and Tenacity of Oil- and Resin-Base Caulking
Compounds
ASTM D2454 (2008) Determining the Effect of Overbaking on
Organic Coatings
Page 97
ASTM D2464 (2013) Standard Specification for Threaded
Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,
Schedule 80
ASTM D2466 (2013) Standard Specification for Poly(Vinyl
Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
ASTM D2467 (2013a) Standard Specification for Poly(Vinyl
Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM D2471 (1999) Standard Test Method for Gel Time and Peak
Exothermic Temperature of Reacting Thermosetting
Resins
ASTM D2472 (2000; R 2006) Standard Specification for Sulphur
Hexafluoride
ASTM D2487 (2011) Soils for Engineering Purposes (Unified Soil
Classification System)
ASTM D2488 (2009a) Description and Identification of Soils
(Visual-Manual Procedure)
ASTM D2489/D2489M (2008) Estimating Degree of Particle Coating of
Bituminous-Aggregate Mixtures
ASTM D2495 (2007; R 2012) Standard Test Method for Moisture in
Cotton by Oven-Drying
ASTM D25 (2012) Round Timber Piles
ASTM D2513 (2013) Thermoplastic Gas Pressure Pipe, Tubing, and
Fittings
ASTM D2517 (2006; R 2011) Reinforced Epoxy Resin Gas Pressure
Pipe and Fittings
ASTM D2523 (2013) Standard Practice for Testing Load-Strain
Properties of Roofing Membranes
ASTM D2559 (2012a) Standard Specification for Adhesives for
Bonded Structural Wood Products for Use Under
Exterior Exposure Conditions
ASTM D256 (2010) Determining the Izod Pendulum Impact
Resistance of Plastics
ASTM D2563 (2008) Classifying Visual Defects in
Glass-Reinforced Plastic Laminate Parts
ASTM D2564 (2012) Standard Specification for Solvent Cements
for Poly(Vinyl Chloride) (PVC) Plastic Piping
Systems
ASTM D2565 (1999; R 2008) Xenon Arc Exposure of Plastics
Intended for Outdoor Applications
Page 98
ASTM D257 (2007) Standard Test Methods for D-C Resistance or
Conductance of Insulating Materials
ASTM D2583 (2013a) Indentation Hardness of Rigid Plastics by
Means of a Barcol Impressor
ASTM D2609 (2002; R 2008) Standard Specification for Plastic
Insert Fittings for Polyethylene (PE) Plastic Pipe
ASTM D2621 (1987; R 2011) Infrared Identification of Vehicle
Solids from Solvent-Reducible Paints
ASTM D2628 (1991; R 2011) Standard Specification for Preformed
Polychloroprene Elastomeric Joint Seals for
Concrete Pavements
ASTM D2632 (2001; R 2014) Rubber Property-Resilience by
Vertical Rebound
ASTM D2652 (2011) Activated Carbon
ASTM D2657 (2007) Heat Fusion Joining Polyolefin Pipe and
Fittings
ASTM D2661 (2011) Standard Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40,
Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665 (2012) Standard Specification for Poly(Vinyl
Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe
and Fittings
ASTM D2672 (1996a; R 2009) Joints for IPS PVC Pipe Using
Solvent Cement
ASTM D2680 (2001; R 2009) Standard Specification for
Acrylonitrile-Butadiene-Styrene (ABS) and
Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D2683 (2010; E 2013) Standard Specification for
Socket-Type Polyethylene Fittings for Outside
Diameter-Controlled Polyethylene Pipe and Tubing
ASTM D2688 (2011) Corrosivity of Water in the Absence of Heat
Transfer (Weight Loss Methods)
ASTM D2697 (2003; R 2008) Volume Nonvolatile Matter in Clear
or Pigmented Coatings
ASTM D2726/D2726M (2013) Bulk Specific Gravity and Density of
Non-Absorptive Compacted Bituminous Mixtures
ASTM D2729 (2011) Poly(Vinyl Chloride) (PVC) Sewer Pipe and
Fittings
ASTM D2737 (2012a) Polyethylene (PE) Plastic Tubing
Page 99
ASTM D2751 (2005) Standard Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe
and Fittings
ASTM D2765 (2011) Determination of Gel Content and Swell Ratio
of Crosslinked Ethylene Plastics
ASTM D2774 (2012) Underground Installation of Thermoplastic
Pressure Piping
ASTM D2794 (1993; R 2010) Resistance of Organic Coatings to
the Effects of Rapid Deformation (Impact)
ASTM D281 (2012) Oil Absorption of Pigments by Spatula Rub-Out
ASTM D2822/D2822M (2005; E 2011; R 2011) Asphalt Roof Cement
ASTM D2824/D2824M (2013) Aluminum-Pigmented Asphalt Roof Coatings,
Non-Fibered, Asbestos Fibered, and Fibered without
Asbestos
ASTM D2835 (1989; R 2012) Lubricant for Installation of
Preformed Compression Seals in Concrete Pavements
ASTM D2837 (2013) Standard Test Method for Obtaining
Hydrostatic Design Basis for Thermoplastic Pipe
Materials or Pressure Design Basis for
Thermoplastic Pipe Products
ASTM D2842 (2012) Water Absorption of Rigid Cellular Plastics
ASTM D2843 (2010) Density of Smoke from the Burning or
Decomposition of Plastics
ASTM D2844/D2844M (2013) Resistance R-Value and Expansion Pressure of
Compacted Soils
ASTM D2846/D2846M (2009; E 2011) Chlorinated Poly(Vinyl Chloride)
(CPVC) Plastic Hot- and Cold-Water Distribution
Systems
ASTM D2854 (2009) Apparent Density of Activated Carbon
ASTM D2855 (1996; R 2010) Standard Practice for Making
Solvent-Cemented Joints with Poly(Vinyl Chloride)
(PVC) Pipe and Fittings
ASTM D2856 (1994; R 1998) Open-Cell Content of Rigid Cellular
Plastics by the Air Pycnometer
ASTM D2859 (2006; R 2011) Ignition Characteristics of Finished
Textile Floor Covering Materials
ASTM D2862 (2010) Particle Size Distribution of Granular
Activated Carbon
ASTM D2863 (2013) Measuring the Minimum Oxygen Concentration
Page 100
to Support Candle-Like Combustion of Plastics
(Oxygen Index)
ASTM D2866 (2011) Total Ash Content of Activated Carbon
ASTM D2867 (2009) Moisture in Activated Carbon
ASTM D2898 (2010) Accelerated Weathering of
Fire-Retardant-Treated Wood for Fire Testing
ASTM D2917 (2007; R 2013) Methyl Isoamyl Ketone
ASTM D2937 (2010) Density of Soil in Place by the
Drive-Cylinder Method
ASTM D2939 (2003) Emulsified Bitumens Used as Protective
Coatings
ASTM D2940/D2940M (2009) Standard Specification for Graded Aggregate
Material for Bases or Subbases for Highways or
Airports
ASTM D2950/D2950M (2011) Density of Bituminous Concrete in Place by
Nuclear Methods
ASTM D297 (2013) Rubber Products – Chemical Analysis
ASTM D2974 (2013) Moisture, Ash, and Organic Matter of Peat
and Other Organic Soils
ASTM D2990 (2009) Tensile, Compressive, and Flexural Creep and
Creep-Rupture of Plastics
ASTM D2992 (2012) Obtaining Hydrostatic or Pressure Design
Basis for “Fiberglass” (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe and Fittings
ASTM D2995 (1999; R 2009) Determining Application Rate of
Bituminous Distributors
ASTM D2996 (2001; E 2007; R 2007) Filament-Wound “Fiberglass”
(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2997 (2001; E 2007; R 2007) Centrifugally Cast
“Fiberglass” (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe
ASTM D3018/D3018M (2011) Standard Specification for Class A Asphalt
Shingles Surfaced With Mineral Granules
ASTM D3019 (2008) Lap Cement Used with Asphalt Roll Roofing
Non Fibered, Asbestos Fibered, and Non Asbestos
Fibered
ASTM D3020 (1989) Polyethylene and Ethylene Copolymer Plastic
Sheeting for Pond, Canal, and Reservoir Lining
Page 101
ASTM D3034 (2008) Standard Specification for Type PSM
Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM D3035 (2012; E 2012; E 2013) Polyethylene (PE) Plastic
Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D3039/D3039M (2008) Tensile Properties of Polymer Matrix
Composite Materials
ASTM D3045 (1992; R 2010) Practice for Heat Aging of Plastics
Without Load
ASTM D3083 (1989) Flexible Poly(Vinyl Chloride) Plastic
Sheeting for Pond, Canal, and Reservoir Lining
ASTM D312 (2000; R 2006) Standard Specification for Asphalt
Used in Roofing
ASTM D3122 (1995; R 2009) Solvent Cements for Styrene-Rubber
(SR) Plastic Pipe and Fittings
ASTM D3138 (2004; R 2011) Solvent Cements for Transition
Joints Between Acrylonitrile-Butadiene-Styrene
(ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure
Piping Components
ASTM D3139 (1998; R 2011) Joints for Plastic Pressure Pipes
Using Flexible Elastomeric Seals
ASTM D3161/D3161M (2013) Standard Test Method for Wind-Resistance of
Asphalt Shingles (Fan-Induced Method)
ASTM D3171 (2011) Standard Test Method for Constituent Content
of Composite Materials
ASTM D3203/D3203M (2011) Percent Air Voids in Compacted Dense and
Open Bituminous Paving Mixtures
ASTM D3212 (2007; R 2013) Standard Specification for Joints
for Drain and Sewer Plastic Pipes Using Flexible
Elastomeric Seals
ASTM D3222 (2005; R 2010) Unmodified Poly(Vinylidene Fluoride)
(PVDF) Molding Extrusion and Coating Materials
ASTM D323 (2008) Vapor Pressure of Petroleum Products (Reid
Method)
ASTM D3261 (2012; E 2014) Standard Specification for Butt Heat
Fusion Polyethylene (PE) Plastic Fittings for
Polyethylene (PE) Plastic Pipe and Tubing
ASTM D3262 (2011) “Fiberglass” (Glass-Fiber-Reinforced
Thermosetting-Resin) Sewer Pipe
ASTM D3273 (2012) Resistance to Growth of Mold on the Surface
of Interior Coatings in an Environmental Chamber
Page 102
ASTM D3274 (2009; R 2013) Evaluating Degree of Surface
Disfigurement of Paint Films by Microbial (Fungal
or Algal) Growth or Soil and Dirt Accumulation
ASTM D3276 (2007) Painting Inspectors (Metal Substrates)
ASTM D3278 (1996; R 2011) Flash Point of Liquids by Small
Scale Closed-Cup Apparatus
ASTM D3299 (2010) Filament-Wound Glass-Fiber-Reinforced
Thermoset Resin Corrosion-Resistant Tanks
ASTM D3307 (2010) Perfluoroalkoxy (PFA)-Fluorocarbon Resin
Molding and Extrusion Materials
ASTM D3308 (2012) PTFE Resin Skived Tape
ASTM D3311 (2011) Drain, Waste, and Vent (DWV) Plastic
Fittings Patterns
ASTM D333 (2001; R 2013) Standard Guide for Clear and
Pigmented Lacquers
ASTM D3330/D3330M (2004; R 2010) Peel Adhesion of Pressure-Sensitive
Tape
ASTM D3335 (1985a; R 2009) Low Concentrations of Lead,
Cadmium, and Cobalt in Paint by Atomic Absorption
Spectroscopy
ASTM D3350 (2012) Polyethylene Plastics Pipe and Fittings
Materials
ASTM D3359 (2009; E 2010; R 2010) Measuring Adhesion by Tape
Test
ASTM D3363 (2005; E 2011; R 2011; E 2012) Film Hardness by
Pencil Test
ASTM D3370 (2010) Sampling Water from Closed Conduits
ASTM D3381/D3381M (2013) Viscosity-Graded Asphalt Cement for Use in
Pavement Construction
ASTM D3389 (2010) Coated Fabrics Abrasion Resistance (Rotary
Platform, Double-Head Abrader)
ASTM D3418 (2012) Transition Temperatures of Polymers by
Differential Scanning Calorimetry
ASTM D3427 (2012) Standard Test Method for Air Release
Properties of Petroleum Oils
ASTM D3451 (2006; R 2012) Testing Coating Powders and Powder
Coatings
ASTM D3455 (2011) Compatibility of Construction Material with
Page 103
Electrical Insulating Oil of Petroleum Origin
ASTM D3462/D3462M (2010a) Standard Specification for Asphalt Shingles
Made From Glass Felt and Surfaced with Mineral
Granules
ASTM D3464 (1996; R 2007) Standard Test Method for Average
Velocity in a Duct Using a Thermal Anemometer
ASTM D3465 (2000; E 2007; R 2007) Standard Test Method for
Purity of Monmeric Plasticizers by Gas
Chromatography
ASTM D3487 (2009) Standard Specification for Mineral
Insulating Oil Used in Electrical Apparatus
ASTM D3498 (2003; R 2011) Adhesives for Field-Gluing Plywood
to Lumber Framing for Floor Systems
ASTM D3551 (2008) Laboratory Preparation of Soil-Lime Mixtures
Using a Mechanical Mixer
ASTM D3567 (1997; R 2011) Standard Practice for Determining
Dimensions of “Fiberglass” (Glass-Fiber-Reinforced
Thermosetting Resin) Pipe and Fittings
ASTM D3574 (2011) Standard Test Methods for Flexible Cellular
Materials—Slab, Bonded, and Molded Urethane Foams
ASTM D3575 (2014) Flexible Cellular Materials Made From Olefin
Polymers
ASTM D3595 (2002; R 2007) Polychlorotrifluoroethylene (PCTFE)
Extruded Plastic Sheet and Film
ASTM D3612 (2002; R 2009) Standard Test Method for Analysis of
Gases Dissolved in Electrical Insulating Oil by Gas
Chromatography
ASTM D3617 (2007) Sampling and Analysis of New Built-Up Roof
Membranes
ASTM D3625/D3625M (2012) Standard Practice for Effect of Water on
Bituminous-Coated Aggregate Using Boiling Water
ASTM D3656/D3656M (2013) Insect Screening and Louver Cloth Woven from
Vinyl-Coated Glass Yarns
ASTM D3665 (2012) Random Sampling of Construction Materials
ASTM D3666 (2013) Standard Specification for Minimum
Requirements for Agencies Testing and Inspecting
Road and Paving Materials
ASTM D3667 (2005; R 2010) Rubber Seals Used in Flat-Plate
Solar Collectors
Page 104
ASTM D3676 (2013) Rubber Cellular Cushion Used for Carpet or
Rug Underlay
ASTM D3678 (1997; E 2008; R 2008) Standard Specification for
Rigid Poly (Vinyl Chloride) (PVC) Interior-Profile
Extrusions
ASTM D3681 (2006) Standard Test Method for Chemical Resistance
of “Fiberglass” (Glass–Fiber–Reinforced
Thermosetting-Resin) Pipe in a Deflected Condition
ASTM D3689 (2007; E 2013; R 2013) Standard Test Methods for
Deep Foundations Under Static Axial Tensile Load
ASTM D3691/D3691M (2009) Woven, Lace, and Knit Household Curtain and
Drapery Fabrics
ASTM D3699 (2013b) Standard Specification for Kerosene
ASTM D3718 (1985a; R 2010) Low Concentrations of Chromium in
Paint by Atomic Absorption Spectroscopy
ASTM D3721 (2005; R 2011) Synthetic Red Iron Oxide Pigment
ASTM D3737 (2012) Standard Practice for Establishing Allowable
Properties for Structural Glued Laminated Timber
(Glulam)
ASTM D374 (1999; R 2004) Thickness of Solid Electrical
Insulation
ASTM D3740 (2012a) Minimum Requirements for Agencies Engaged
in the Testing and/or Inspection of Soil and Rock
as Used in Engineering Design and Construction
ASTM D3744/D3744M (2011a) Standard Test Method for Aggregate
Durability Index
ASTM D374M (1999; R 2005) Standard Test Methods for Thickness
of Solid Electrical Insulation (Metric)
ASTM D3753 (2012; E 2013) Glass-Fiber-Reinforced Polyester
Manholes and Wetwells
ASTM D3754 (2011) “Fiberglass” (Glass-Fiber-Reinforced
Thermosetting-Resin) Sewer and Industrial Pressure
Pipe
ASTM D3775 (2012) Warp End Count and Filling Pick Count of
Woven Fabric
ASTM D3776/D3776M (2009a; R 2013) Standard Test Method for Mass Per
Unit Area (Weight) of Fabric
ASTM D3786/D3786M (2013) Hydraulic Bursting Strength of Textile
Fabrics-Diaphragm Bursting Strength Tester Method
Page 105
ASTM D3787 (2007; R 2011) Bursting Strength of Textiles -
Constant-Rate-of-Traverse (CRT), Ball Burst Test
ASTM D3802 (2010) Ball-Pan Hardness of Activated Carbon
ASTM D3833/D3833M (1996; R 2011) Water Vapor Transmission of
Pressure-Sensitive Tapes
ASTM D3839 (2008) Underground Installation of “Fiberglass”
(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3840 (2010) “Fiberglass” (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe Fittings for Nonpressure
Applications
ASTM D3841 (1997; E 2008; R 2008) Standard Specification for
Glass Fiber-Reinforced Polyester Plastic Panels
ASTM D3846 (2008) Standard Test Method for In-Plane Shear
Strength of Reinforced Plastics
ASTM D3860 (1998; R 2008) Determination of Adsorptive Capacity
of Activated Carbon by Aqueous Phase Isotherm
Technique
ASTM D3867 (2009) Nitrite-Nitrate in Water
ASTM D3884 (2009; R 2013) Abrasion Resistance of Textile
Fabrics (Rotary Platform, Double-Head Method)
ASTM D3887 (1996; R 2008) Standard Specification for
Tolerances for Knitted Fabrics
ASTM D3892 (1993; R 2009) Packaging/Packing of Plastics
ASTM D3895 (2007) Oxidative-Induction Time of Polyolefins by
Differential Scanning Calorimetry
ASTM D390 (1992; R 1999) Coal-Tar Creosote for the
Preservative Treatment of Piles, Poles and Timbers
for Marine, Land, and Fresh Water Use
ASTM D3910 (2011) Design, Testing, and Construction of Slurry
Seal
ASTM D3915 (2006) Rigid Poly(Vinyl Chloride) (PVC) and
Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
for Plastic Pipe and Fittings Used in Pressure
Applications
ASTM D3916 (2008) Tensile Properties of Pultruded
Glass-Fiber-Reinforced Plastic Rod
ASTM D3924 (1980; R 2011) Standard Environment for
Conditioning and Testing Paint, Varnish, Lacquer,
and Related Materials
Page 106
ASTM D3925 (2002; R 2010) Sampling Liquid Paints and Related
Pigmented Coatings
ASTM D395 (2003; R 2008) Standard Test Methods for Rubber
Property – Compression Set
ASTM D3951 (2010) Commercial Packaging
ASTM D396 (2013c) Standard Specification for Fuel Oils
ASTM D3960 (2005; R 2013) Determining Volatile Organic
Compound (VOC) Content of Paints and Related
Coatings
ASTM D3965 (2011) Rigid Acrylonitrile-Butadiene-Styrene (ABS)
Materials for Pipe and Fittings
ASTM D3966/D3966M (2007) Standard Test Methods for Deep Foundations
Under Lateral Load
ASTM D4 (1986; R 2010) Bitumen Content
ASTM D4000 (2013) Standard Classification System for
Specifying Plastic Materials
ASTM D4016 (2008) Viscosity of Chemical Grouts by Brook field
Viscometer (Laboratory Method)
ASTM D402 (2008) Distillation of Cut-Back Asphaltic
(Bituminous) Products
ASTM D4020 (2011) Ultra-High-Molecular-Weight Polyethylene
Molding and Extrusion Materials
ASTM D4024 (2012) Machine Made “Fiberglass”
(Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D4057 (2012) Standard Practice for Manual Sampling of
Petroleum and Petroleum Products
ASTM D4059 (2000; R 2010) Analysis of Polychlorinated
Biphenyls in Insulating Liquids by Gas
Chromatography
ASTM D4060 (2010) Abrasion Resistance of Organic Coatings by
the Taber Abraser
ASTM D4068 (2009) Chlorinated Polyethylene Sheeting for
Concealed Water-Containment Membrane
ASTM D4073 (2006; R 2013) Standard Test Method for
Tensile-Tear Strength of Bituminous Roofing
Membranes
ASTM D4078 (2002; R 2008) Water Emulsion Floor Polish
ASTM D4093 (1995; R 2010) Photoelastic Measurements of
Page 107
Birefringence and Residual Strains in Transparent
or Translucent Plastic Materials
ASTM D4097 (2001; R 2010) Contact-Molded
Glass-Fiber-Reinforced Thermoset Resin
Corrosion-Resistant Tanks
ASTM D41/D41M (2011) Asphalt Primer Used in Roofing,
Dampproofing, and Waterproofing
ASTM D4101 (2011) Standard Specification for Polypropylene
Injection and Extrusion Materials
ASTM D412 (2006a; R 2013) Standard Test Methods for
Vulcanized Rubber and Thermoplastic Elastomers -
Tension
ASTM D4125/D4125M (2010) Asphalt Content of Bituminous Mixtures by
the Nuclear Method
ASTM D413 (1998; R 2013) Rubber Property – Adhesion to
Flexible Substrate
ASTM D4157 (2013) Standard Test Method for Abrasion Resistance
of Textile Fabrics (Oscillatory Cylinder Method)
ASTM D4161 (2001; R 2010) “Fiberglass” (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe Joints Using Flexible
Elastomeric Seals
ASTM D4167 (1997; R 2007) Fiber-Reinforced Plastic Fans and
Blowers
ASTM D4177 (1995; R 2010) Standard Practice for Automatic
Sampling of Petroleum and Petroleum Products
ASTM D420 (1998; R 2003) Site Characterization for
Engineering Design, and Construction Purposes
ASTM D4214 (2007) Standard Test Method for Evaluating the
Degree of Chalking of Exterior Paint Films
ASTM D4216 (2013) Rigid Poly (Vinyl Chloride) (PVC) and
Related PVC and Chlorinated Poly (Vinyl Chloride)
(CPVC) Building Products Compounds
ASTM D4218 (1996; R 2008) Determination of Carbon Black
Content in Polyethylene Compounds by the
Muffle-Furnace Technique
ASTM D422 (1963; R 2007; E 2014) Particle-Size Analysis of
Soils
ASTM D4220 (1995; R 2007) Preserving and Transporting Soil
Samples
ASTM D4253 (2000; R 2006) Maximum Index Density and Unit
Page 108
Weight of Soils Using a Vibratory Table
ASTM D4254 (2000; R 2006; E 2008) Minimum Index Density and
Unit Weight of Soils and Calculation of Relative
Density
ASTM D4259 (1988; R 2012) Standard Practice for Abrading
Concrete
ASTM D4263 (1983; R 2012) Indicating Moisture in Concrete by
the Plastic Sheet Method
ASTM D4280 (2012) Extended Life Type, Nonplowable, Raised,
Retroreflective Pavement Markers
ASTM D4285 (1983; R 2012) Indicating Oil or Water in
Compressed Air
ASTM D429 (2008) Rubber Property-Adhesion to Rigid Substrates
ASTM D43/D43M (2000; R 2012) Standard Specification for Coal Tar
Primer Used in Roofing, Dampproofing, and
Waterproofing
ASTM D430 (2006; R 2012) Standard Test Methods for Rubber
Deterioration – Dynamic Fatigue
ASTM D4318 (2010; E 2014) Liquid Limit, Plastic Limit, and
Plasticity Index of Soils
ASTM D4329 (2013) Standard Practice for Fluorescent UV
Exposure of Plastics
ASTM D4354 (2012) Sampling of Geosynthetics for Testing
ASTM D4355 (2007) Deterioration of Geotextiles from Exposure
to Light, Moisture and Heat in a Xenon-Arc Type
Apparatus
ASTM D4357 (1996) Plastic Laminates Made from Woven-Roving and
Woven-Yarn Glass Fabrics
ASTM D4380 (2012) Standard Test Method for Density of
Bentonitic Slurries
ASTM D4397 (2010) Standard Specification for Polyethylene
Sheeting for Construction, Industrial, and
Agricultural Applications
ASTM D4400 (1999; E 2012; R 2012) Sag Resistance of Paints
Using a Multinotch Applicator
ASTM D4402/D4402M (2013) Viscosity Determination of Asphalt at
Elevated Temperatures Using a Rotational Viscometer
ASTM D4417 (2011) Field Measurement of Surface Profile of
Blast Cleaned Steel
Page 109
ASTM D4427 (2013) Peat Samples by Laboratory Testing
ASTM D4434/D 4434M (2012) Poly(Vinyl Chloride) Sheet Roofing
ASTM D4439 (2011) Geosynthetics
ASTM D4444 (2013) Use and Calibration of Hand-Held Moisture
Meters
ASTM D445 (2012) Standard Test Method for Kinematic Viscosity
of Transparent and Opaque Liquids (and the
Calculation of Dynamic Viscosity)
ASTM D4479/D4479M (2007; E 2012; R 2012) Asphalt Roof Coatings -
Asbestos-Free
ASTM D448 (2012) Sizes of Aggregate for Road and Bridge
Construction
ASTM D449/D449M (2003; R 2014; E 2014) Asphalt Used in Dampproofing
and Waterproofing
ASTM D4491 (1999a; R 2014; E 2014) Water Permeability of
Geotextiles by Permittivity
ASTM D450/D450M (2007; E 2013; R 2013) Coal-Tar Pitch Used in
Roofing, Dampproofing, and Waterproofing
ASTM D4501 (2001; E 2009; R 2009) Adhesive Bonds Between Rigid
Substrates by the Block-Shear Method
ASTM D4505 (2012) Preformed Retroflective Pavement Marking
Tape for Extended Service Life
ASTM D4533 (2011) Trapezoid Tearing Strength of Geotextiles
ASTM D4541 (2009; E 2010) Pull-Off Strength of Coatings Using
Portable Adhesion Testers
ASTM D4551 (2012) Poly(Vinyl Chloride) (PVC) Plastic Flexible
Concealed Water-Containment Membrane
ASTM D4552/D4552M (2010) Classifying Hot-Mix Recycling Agents
ASTM D4586/D4586M (2007; E 2012; R 2012) Asphalt Roof Cement,
Asbestos-Free
ASTM D4587 (2011) Standard Practice for Fluorescent
UV-Condensation Exposures of Paint and Related
Coatings
ASTM D4595 (2011) Tensile Properties of Geotextiles by the
Wide-Width Strip Method
ASTM D4601/D4601M (2004; R 2012) Asphalt-Coated Glass Fiber Base
Sheet Used in Roofing
Page 110
ASTM D4607 (1994; R 2011) Determination of Iodine Number of
Activated Carbon
ASTM D4632/D4632M (2008; E 2013; R 2013) Grab Breaking Load and
Elongation of Geotextiles
ASTM D4635 (2008a) Standard Specification for Polyethylene
Films Made from Low-Density Polyethylene for
General Use and Packaging Applications
ASTM D4637/D4637M (2013) EPDM Sheet Used in Single-Ply Roof Membrane
ASTM D4643 (2008) Determination of Water (Moisture) Content of
Soil by the Microwave Oven Method
ASTM D4689 (2012) Standard Specification for Adhesive,
Casein-Type
ASTM D4690 (2012) Standard Specification for Urea Formaldehyde
Resin Adhesives
ASTM D470 (2013) Crosslinked Insulations and Jackets for Wire
and Cable
ASTM D471 (2012a) Standard Test Method for Rubber Property -
Effect of Liquids
ASTM D4716/D4716M (2008; R 2013) Determining the (In-Plane) Flow Rate
Per Unit Width and Hydraulic Transmissivity of a
Geosynthetic Using a Constant Head
ASTM D4745 (2011a; E 2001) Standard Specification for Filled
Compounds of Polytetrafluoroethylene (PTFE) Molding
and Extrusion Materials
ASTM D4750 (1987; R 2001) Determining Subsurface Liquid Levels
in a Borehole or Monitoring Well (Observation Well)
ASTM D4751 (2012) Determining Apparent Opening Size of a
Geotextile
ASTM D4759 (2011) Determining the Specification Conformance of
Geosynthetics
ASTM D476 (2013) Dry Pigmentary Titanium Dioxide Pigments
ASTM D4791 (2010) Flat Particles, Elongated Particles, or Flat
and Elongated Particles in Coarse Aggregate
ASTM D4802 (2010) Poly(Methyl Methacrylate) Acrylic Plastic
Sheet
ASTM D4811/D4811M (2006; E 2013; R 2013) Nonvulcanized (Uncured)
Rubber Sheet Used as Roof Flashing
ASTM D4814 (2013b) Automotive Spark-Ignition Engine Fuel
Page 111
ASTM D4832 (2010) Preparation and Testing of Controlled Low
Strength Material (CLSM) Test Cylinders
ASTM D4833/D4833M (2007; E 2013; R 2013) Index Puncture Resistance of
Geotextiles, Geomembranes, and Related Products
ASTM D4840 (1999; R 2010) Sampling Chain-Of-Custody Procedures
ASTM D4867/D4867M (2009) Effect of Moisture on Asphalt Concrete
Paving Mixtures
ASTM D4869/D4869M (2005; E 2011; R 2011) Standard Specification for
Asphalt-Saturated Organic Felt Underlayment Used in
Steep Slope Roofing
ASTM D4873 (2002; R 2009) Identification, Storage, and
Handling of Geosynthetic Rolls and Samples
ASTM D4884/D4884M (2014) Strength of Sewn or Thermally Bonded Seams
of Geotextiles
ASTM D4887/D4887M (2011) Preparation of Viscosity Blends for Hot
Recycled Bituminous Materials
ASTM D4897/D4897M (2001; R 2009) Standard Specification for
Asphalt-Coated Glass-Fiber Venting Base Sheet Used
in Roofing
ASTM D490 (1992; R 2011) Road Tar
ASTM D4944 (2011) Field Determination of Water (Moisture)
Content of Soil by the Calcium Carbide Gas Pressure
Tester Method
ASTM D4945 (2012) High-Strain Dynamic Testing of Piles
ASTM D495 (1999; R 2004) Standard Test Method for
High-Voltage, Low-Current, Dry Arc Resistance of
Solid Electrical Insulation
ASTM D4959 (2007) Determination of Water (Moisture) Content of
Soil by Direct Heating
ASTM D4972 (2013) pH of Soils
ASTM D4976 (2012a) Standard Specification for Polyethylene
Plastics Molding and Extrusion Materials
ASTM D4992 (2007) Evaluation of Rock to be Used for Erosion
Control
ASTM D5 (2006; E 2006) Penetration of Bituminous Materials
ASTM D5034 (2009; R 2013) Breaking Strength and Elongation of
Textile Fabrics (Grab Test)
ASTM D5035 (2011) Breaking Force and Elongation of Textile
Page 112
Fabrics (Strip Method)
ASTM D5079 (2008) Preserving and Transporting Rock Core Samples
ASTM D5084 (2010) Measurement of Hydraulic Conductivity of
Saturated Porous Materials Using a Flexible Wall
Permeameter
ASTM D5088 (2002; R 2008) Decontamination of Field Equipment
Used at Nonradioactive Waste Sites
ASTM D5092 (2004; E 2010; R 2010) Design and Installation of
Ground Water Monitoring Wells in Aquifers
ASTM D5102 (2009) Standard Test Method for Unconfined
Compressive Strength of Compacted Soil-Lime Mixtures
ASTM D5106 (2013) Steel Slag Aggregates for Bituminous Paving
Mixtures
ASTM D5116 (2010) Standard Guide for Small-Scale Environmental
Chamber Determinations of Organic Emissions from
Indoor Materials/Products
ASTM D512 (2012) Chloride Ion in Water
ASTM D5147/D5147M (2014) Standard Test Methods for Sampling and
Testing Modified Bituminous Sheet Material
ASTM D5148 (2010) Standard Test Method for Centrifuge Kerosine
Equivalent
ASTM D5158 (1998; R 2013) Determination of the Particle Size
of Powdered Activated Carbon by Air Jet Sieving
ASTM D516 (2011) Sulfate Ion in Water
ASTM D517 (1998; R 2008) Asphalt Plank
ASTM D5195 (2008) Density of Soil and Rock In-Place at Depths
Below the Surface by Nuclear Methods
ASTM D5199 (2012) Measuring Nominal Thickness of Geosynthetics
ASTM D520 (2000; R 2011) Zinc Dust Pigment
ASTM D5203 (2007) Polyethylene Plastics Molding and Extrusion
Materials from Recycled Post-Consumer (HDPE) Sources
ASTM D522 (1993a; R 2008) Mandrel Bend Test of Attached
Organic Coatings
ASTM D522/D522M (2014) Mandrel Bend Test of Attached Organic
Coatings
ASTM D5228 (1992; R 2010) Determination of the Butane Working
Capacity of Activated Carbon
Page 113
ASTM D523 (2014) Standard Test Method for Specular Gloss
ASTM D5249 (2010) Backer Material for Use with Cold-and
Hot-Applied Joint Sealants in Portland-Cement
Concrete and Asphalt Joints
ASTM D5261 (2010) Measuring Mass Per Unit Area of Geotextiles
ASTM D5262 (2007) Evaluating the Unconfined Tension Creep
Behavior of Geosynthetics
ASTM D5268 (2013) Topsoil Used for Landscaping Purposes
ASTM D5299 (1999; E 2012; R 2012) Decommissioning of Ground
Water Wells, Vadose Zone Monitoring Devices,
Boreholes, and Other Devices for Environmental
Activities
ASTM D5312/D5312M (2012; R 2013) Evaluation of Durability of Rock for
Erosion Control Under Freezing and Thawing
Conditions
ASTM D5313/D5313M (2012; R 2013) Evaluation of Durability of Rock for
Erosion Control Under Wetting and Drying Conditions
ASTM D5321/D5321M (2014) Determining the Coefficient of Soil and
Geosynthetic or Geosynthetic and Geosynthetic
Friction by the Direct Shear Method
ASTM D5385 (1993; R 2006) Hydrostatic Pressure Resistance of
Waterproofing Membranes
ASTM D5397 (2007; R 2012) Evaluation of Stress Crack
Resistance of Polyolefin Geomembranes Using Notched
Constant Tensile Load Test
ASTM D542 (2013) Index of Refraction of Transparent Organic
Plastics
ASTM D5420 (2010) Impact Resistance of Flat, Rigid Plastic
Specimen by Means of a Strike Impacted by a Falling
Weight (Gardner Impact)
ASTM D5421 (2005; R 2010) Contact Molded “Fiberglass”
(Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D543 (2006) Standard Practices for Evaluating the
Resistance of Plastics to Chemical Reagents
ASTM D5434 (2012) Field Logging of Subsurface Explorations of
Soil and Rock
ASTM D5444 (2008) Mechanical Size Analysis of Extracted
Aggregate
ASTM D5456 (2013a) Evaluation of Structural Composite Lumber
Products
Page 114
ASTM D546 (2010) Sieve Analysis of Mineral Filler for
Bituminous Paving Mixtures
ASTM D5469/D5469M (2012) Application of New Spray Applied
Polyurethane Foam and Coated Roofing Systems
ASTM D5505 (2006) Classifying Emulsified Recycling Agents
ASTM D5519 (2007) Particle Size Analysis of Natural and
Man-Made Riprap Materials
ASTM D5521/D5521M (2013) Standard Guide for Development of
Ground-Water Monitoring Wells in Granular Aquifers
ASTM D5539 (2013) Seed Starter Mix
ASTM D5543 (2009) Standard Test Methods for Low-Level
Dissolved Oxygen in Water
ASTM D558 (2011) Moisture-Density (Unit Weight) Relations of
Soil-Cement Mixtures
ASTM D559 (2003) Wetting and Drying Compacted Soil-Cement
Mixtures
ASTM D5590 (2000; R 2010; E 2012) Standard Test Method for
Determining the Resistance of Paint Films and
Related Coatings to Fungal Defacement by
Accelerated Four-Week Agar Plate Assay
ASTM D5596 (2003; R 2009) Microscopic Evaluation of the
Dispersion of Carbon Black in Polyolefin
Geosynthetics
ASTM D56 (2005; R 2010) Flash Point by Tag Closed Cup Tester
ASTM D560 (2003) Freezing and Thawing Compacted Soil-Cement
Mixtures
ASTM D5603 (2001; R 2008) Rubber Compounding Materials -
Recycled Vulcanizate Particulate Rubber
ASTM D5608 (2010) Decontamination of Field Equipment Used at
Low Level Radioactive Waste Sites
ASTM D561 (1982; R 2008) Carbon Black Pigment for Paint
ASTM D562 (2010) Consistency of Paints Measuring Krebs Unit
(KU) Viscosity Using a Stormer-Type Viscometer
ASTM D5641 (1994; R 2011) Geomembrane Seam Evaluation by
Vacuum Chamber
ASTM D566 (2002; R 2009) Dropping Point of Lubricating Grease
ASTM D5663 (1997; R 2011) Validating Recycled Content in
Packaging Paper and Paperboard
Page 115
ASTM D5677 (2005; R 2010) Fiberglass (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe and Pipe Fittings,
Adhesive Bonded Joint Type, for Aviation Jet
Turbine Fuel Lines
ASTM D5685 (2011) “Fiberglass” (Glass-Fiber-Reinforced
Thermosetting-Resin) Pressure Pipe Fittings
ASTM D570 (1998; E 2010; R 2010) Standard Test Method for
Water Absorption of Plastics
ASTM D572 (2004; R 2010) Rubber Deterioration by Heat and
Oxygen
ASTM D5721 (2008; R 2013) Air-Oven Aging of Polyolefin
Geomembranes
ASTM D5727/D5727M (2000; E 2011; R 2011) Emulsified Refined Coal Tar
(Mineral Colloid Type)
ASTM D573 (2004; R 2010) Standard Test Method for Rubber -
Deterioration in an Air Oven
ASTM D575 (1991; R 2012) Rubber Properties in Compression
ASTM D5759 (2012) Characterization of Coal Fly Ash and Clean
Coal Combustion Fly Ash for Potential Uses
ASTM D578/D578M (2005; E 2011; R 2011) Glass Fiber Strands
ASTM D579 (2010) Standard Specification for Greige Woven
Glass Fabrics
ASTM D579/D579M (2010) Standard Specification for Greige Woven
Glass Fabrics
ASTM D5793 (2013) Binding Sites Per Unit Length or Width of
Pile Yarn Floor Coverings
ASTM D5821 (2013) Standard Test Method for Determining the
Percentage of Fractured Particles in Coarse
Aggregate
ASTM D5848 (2010; E 2010) Mass Per Unit Area of Pile Yarn
Floor Coverings
ASTM D5851 (1995; R 2011) Planning and Implementing a Water
Monitoring Program
ASTM D5852 (2000; R 2007) Standard Test Method for Erodibility
Determination of Soil in the Field or in the
Laboratory by the Jet Index Method
ASTM D5864 (2011) Standard Test Method for Determining Aerobic
Aquatic Biodegradation of Lubricants or Their
Components
Page 116
ASTM D5885 (2006; R 2012) Oxidative Induction Time of
Polyolefin Geosynthetics by High-Pressure
Differential Scanning Calorimetry
ASTM D5887 (2009) Measurement of Index Flux Through Saturated
Geosynthetic Clay Liner Specimens Using a Flexible
Wall Permeameter
ASTM D5888 (2006; R 2011) Storage and Handling of Geosynthetic
Clay Liners
ASTM D5889 (2011) Quality Control of Geosynthetic Clay Liners
ASTM D5890 (2011) Swell Index of Clay Mineral Component of
Geosynthetic Clay Liners
ASTM D5891 (2002; R 2009) Fluid Loss of Clay Component of
Geosynthetic Clay Liners
ASTM D5893/D5893M (2010) Cold Applied, Single Component, Chemically
Curing Silicone Joint Sealant for Portland Cement
Concrete Pavements
ASTM D5894 (2010) Cyclic Salt Fog/UV Exposure of Painted
Metal, (Alternating Exposures in a Fog/Dry Cabinet
and a UV/Condensation Cabinet)
ASTM D5948 (2005; R 2012) Standard Specification for Molding
Compounds, Thermosetting
ASTM D596 (2001; R 2011) Reporting Results of Analysis of
Water
ASTM D5993 (1999; R 2009) Measuring Mass Per Unit of
Geosynthetic Clay Liners
ASTM D5994 (2010) Measuring Core Thickness of Textured
Geomembrane
ASTM D6/D6M (1995; E 2011; R 2011) Loss on Heating of Oil and
Asphaltic Compounds
ASTM D6007 (2002; R 2008) Standard Test Method for Determining
Formaldehyde Concentration in Air from Wood
Products Using a Small Scale Chamber
ASTM D6072/D6072M (2009) Obtaining Samples of Geosynthetic Clay Liners
ASTM D6081 (1998; R 2009) Aquatic Toxicity Testing of
Lubricants: Sample Preparation and Results
Interpretation
ASTM D610 (2008; R 2012) Evaluating Degree of Rusting on
Painted Steel Surfaces
ASTM D6108 (2013) Standard Test Method for Compressive
Properties of Plastic Lumber and Shapes
Page 117
ASTM D6109 (2013) Standard Test Methods for Flexural
Properties of Unreinforced and Reinforced Plastic
Lumber and Related Products
ASTM D6111 (2013a) Standard Test Method for Bulk Density and
Specific Gravity of Plastic Lumber and Shapes by
Displacement
ASTM D6112 (2013) Compressive and Flexural Creep and
Creep-Rupture of Plastic Lumber and Shapes
ASTM D6117 (2013) Standard Test Methods for Mechanical
Fasteners in Plastic Lumber and Shapes
ASTM D6155 (2013) Nontraditional Coarse Aggregate for
Bituminous Paving Mixtures
ASTM D6162 (2000a; R 2008) Styrene Butadiene Styrene (SBS)
Modified Bituminous Sheet Materials Using a
Combination of Polyester and Glass Fiber
Reinforcements
ASTM D6163 (2000; R 2008) Styrene Butadiene Styrene (SBS)
Modified Bituminous Sheet Materials Using Glass
Fiber Reinforcements
ASTM D6164/D6164M (2011) Styrene Butadiene Styrene (SBS) Modified
Bituminous Sheet Materials Using Polyester
Reinforcements
ASTM D6222/D6222M (2011) Atactic Polypropylene (ARP) Modified
Bituminous Sheet Materials Using Polyester
Reinforcements
ASTM D6223/D6223M (2002; E 2009; R 2009) Standard Specification for
Atactic Polypropylene (ARP) Modified Bituminous
Sheet Materials Using a Combination of Polyester
and Glass Fiber Reinforcements
ASTM D6226 (2010) Standard Test Method for Open Cell Content
of Rigid Cellular Plastics
ASTM D6237 (2009) Painting Inspectors (Concrete and Masonry
Substrates)
ASTM D624 (2000; R 2012) Tear Strength of Conventional
Vulcanized Rubber and Thermoplastic Elastomers
ASTM D6241 (2004; R 2009; E 2014) Standard Test Method for the
Static Puncture Strength of Geotextiles and
Geotextile-Related Products Using a 50-mm Probe
ASTM D6243/D6243M (2013a) Determining the Internal and Interface
Shear Resistance of Geosynthetic Clay Liner by the
Direct Shear Method
ASTM D6245 (2012) Using Indoor Carbon Dioxide Concentrations
Page 118
to Evaluate Indoor Air Quality and Ventilation
ASTM D6270 (2008; R 2012) Use of Scrap Tires in Civil
Engineering Applications
ASTM D6298 (2013) Fiberglass Reinforced
Styrene-Butadiene-Styrene (SBS) Modified Bituminous
Sheet with Factory Applied Metal Surface
ASTM D6304 (2007) Standard Test Method for Determination of
Water in Petroleum Products, Lubricating Oils, and
Additives by Coulometric Karl Fischer Titration
ASTM D6307 (2010) Asphalt Content of Hot Mix Asphalt by
Ignition Method
ASTM D633 (2011) Volume Correction Table for Road Tar
ASTM D6330 (1998; R 2008) Standard Practice for Determination
of Volatile Organic Compounds (Excluding
Formaldehyde) Emissions from Wood-Based Panels
Using Small Environmental Chambers Under Defined
Test Conditions
ASTM D6345 (2010) Selection of Methods for Active, Integrative
Sampling of Volatile Organic Compounds in Air
ASTM D635 (2010) Standard Test Method for Rate of Burning
and/or Extent and Time of Burning of
Self-Supporting Plastics in a Horizontal Position
ASTM D6368 (2006; R 2012) Standard Specification for
Vapor-Degreasing Grade, and General Grade Normal -
Propyl Bromide
ASTM D6369 (1999; R 2006) Design of Standard Flashing Details
for EPDM Roof Membranes
ASTM D638 (2010) Standard Test Method for Tensile Properties
of Plastics
ASTM D6380/D6380M (2003; E 2013; R 2013) Standard Specification for
Asphalt Roll Roofing (Organic Felt)
ASTM D6386 (2010) Standard Practice for Preparation of Zinc
(Hot-Dip Galvanized) Coated Iron and Steel Product
and Hardware Surfaces for Painting
ASTM D6390 (2011) Determination of Draindown Characteristics
in Uncompacted Asphalt Mixtures
ASTM D6392 (2012) Determining the Integrity of Nonreinforced
Geomembrane Seams Produced Using Thermo-Fusion
Methods
ASTM D648 (2007) Deflection Temperature of Plastics Under
Flexural Load in the Edgewise Position
Page 119
ASTM D6496 (2004a; R 2009) Determining Average Bonding Peel
Strength Between the Top and Bottom Layers of
Needle-Punched Geosynthetic Clay Liners
ASTM D6497 (2002; R 2010) Mechanical Attachment of Geomembrane
to Penetrations or Structures
ASTM D6629 (2001; E 2012; R 2012) Selection of Methods for
Estimating Soil Loss by Erosion
ASTM D6637 (2011) Standard Test Method for Determining Tensile
Properties of Geogrids by the Single or Multi-Rib
Tensile Method
ASTM D6638 (2011) Determining Connection Strength Between
Geosynthetic Reinforcement and Segmental Concrete
Units (Modular Concrete Blocks)
ASTM D664 (2011a) Standard Test Method for Acid Number of
Petroleum Products by Potentiometric Titration
ASTM D665 (2012) Standard Test Method for Rust-Preventing
Characteristics of Inhibited Mineral Oil in the
Presence of Water
ASTM D6662 (2013) Standard Specification for Polyolefin-Based
Plastic Lumber Decking Boards
ASTM D6690 (2012) Standard Specification for Joint and Crack
Sealants, Hot Applied, for Concrete and Asphalt
Pavements
ASTM D6706 (2001; R 2013) Standard Test Method for Measuring
Geosynthetic Pullout Resistance in Soil
ASTM D6725 (2004; R 2010) Standard Practice for Direct Push
Installation of Prepacked Screen Monitoring Wells
in Unconsolidated Aquifers
ASTM D6754/D6754M (2010) Standard Specification for Ketone Ethylene
Ester Based Sheet Roofing
ASTM D6757 (2007; R 2013) Standard Specification for
Underlayment Felt Containing Inorganic Fibers Used
in Steep-Slope Roofing
ASTM D6765 (2012) Standard Practice for Live Staking
ASTM D6768 (2004; R 2009) Tensile Strength of Geosynthetic
Clay Liners
ASTM D6836 (2002; E 2008; R 2008; E 2009) Standard Test
Methods for Determination of the Soil Water
Characteristic Curve for Desorption Using a Hanging
Column, Pressure Extractor, Chilled Mirror
Hygrometer, and/or Centrifuge
Page 120
ASTM D6859 (2011) Standard Test Method for Pile Thickness of
Finished Level Pile Yarn Floor Coverings
ASTM D6871 (2003; R 2008) Standard Specification for Natural
(Vegetable Oil) Ester Fluids Used in Electrical
Apparatus
ASTM D692/D692M (2009) Coarse Aggregate for Bituminous Paving
Mixtures
ASTM D6925 (2009) Standard Test Method for Preparation and
Determination of the Relative Density of Hot Mix
Asphalt (HMA) Specimens by Means of the Superpave
Gyratory Compactor
ASTM D6926 (2010) Standard Practice for Preparation of
Bituminous Specimens Using Marshall Apparatus
ASTM D6927 (2006) Standard Test Method for Marshall Stability
and Flow of Bituminous Mixtures
ASTM D6938 (2010) Standard Test Method for In-Place Density
and Water Content of Soil and Soil-Aggregate by
Nuclear Methods (Shallow Depth)
ASTM D695 (2010) Standard Test Method for Compressive
Properties of Rigid Plastics
ASTM D696 (2008; E 2013) Standard Test Method for Coefficient
of Linear Thermal Expansion of Plastics Between -30
degrees C and 30 degrees C With a Vitreous Silica
Dilatometer
ASTM D698 (2012; E 2014) Laboratory Compaction
Characteristics of Soil Using Standard Effort
(12,400 ft-lbf/cu. ft. (600 kN-m/cu. m.))
ASTM D70 (2009; E 2009) Specific Gravity and Density of
Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM D7005 (2003; R 2008) Standard Test Method for Determining
the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D709 (2013) Laminated Thermosetting Materials
ASTM D7091 (2013) Standard Practice for Nondestructive
Measurement of Dry Film Thickness of Nonmagnetic
Coatings Applied to Ferrous Metals and Nonmagnetic,
Nondestructive Coatings Applied to Non-Ferrous
Metals
ASTM D711 (2010) No-Pick-Up Time of Traffic Paint
ASTM D7116 (2005) Standard Specification for Joint Sealants,
Hot Applied, Jet Fuel Resistant Types, for Portland
Cement Concrete Pavement
Page 121
ASTM D7127 (2013) Measurement of Surface Roughness of Abrasive
Blast Cleaned Metal Surfaces using a Portable
Stylus Instrument
ASTM D714 (2002; R 2009) Evaluating Degree of Blistering of
Paints
ASTM D7155 (2011) Standard Practice for Evaluating
Compatibility of Mixtures of Turbine Lubricating
Oils
ASTM D7238 (2006; R 2012) Standard Test Method for Effect of
Exposure of Unreinforced Polyolefin Geomembrane
Using Fluorescent UV Condensation Apparatus
ASTM D7258 (2014) Standard Specification for Polymeric Piles
ASTM D737 (2004; R 2012) Air Permeability of Textile Fabrics
ASTM D740 (2011) Methyl Ethyl Ketone
ASTM D746 (2013) Standard Test Method for Brittleness
Temperature of Plastics and Elastomers by Impact
ASTM D7466 (2010) Standard Test Method for Measuring Asperity
Height of Textured Geomembranes
ASTM D75/D75M (2013) Standard Practice for Sampling Aggregates
ASTM D751 (2006; R 2011) Coated Fabrics
ASTM D7611/D7611M (2013) Standard Practice for Coding Plastic
Manufactured Articles for Resin Identification
ASTM D774/D774M (1997; R 2007) Bursting Strength of Paper
ASTM D785 (2008) Rockwell Hardness of Plastics and Electrical
Insulating Materials
ASTM D789 (2007; E 2010) Determination of Relative Viscosity
and Moisture Content of Polyamide (PA)
ASTM D790 (2010) Flexural Properties of Unreinforced and
Reinforced Plastics and Electrical Insulating
Materials
ASTM D792 (2013) Density and Specific Gravity (Relative
Density) of Plastics by Displacement
ASTM D814 (1995; R 2010) Rubber Property – Vapor Transmission
of Volatile Liquids
ASTM D822 (2001; R 2006) Filtered Open-Flame Carbon-Arc
Exposures of Paint and Related Coatings
ASTM D823 (1995; E 2012; R 2012) Producing Films of Uniform
Thickness of Paint, Varnish, and Related Products
Page 122
on Test Panels.
ASTM D841 (2013) Nitration Grade Toluene
ASTM D854 (2010) Specific Gravity of Soil Solids by Water
Pycnometer
ASTM D877 (2002; R 2007) Standard Test Method for Dielectric
Breakdown Voltage of Insulating Liquids Using Disk
Electrodes
ASTM D877/D877M (2013) Standard Test Method for Dielectric
Breakdown Voltage of Insulating Liquids Using Disk
Electrodes
ASTM D882 (2012) Tensile Properties of Thin Plastic Sheeting
ASTM D883 (2011) Terminology Relating to Plastics
ASTM D888 (2012; E 2013) Dissolved Oxygen in Water
ASTM D892 (2013) Standard Test Method for Foaming
Characteristics of Lubricating Oils
ASTM D903 (1998; R 2010) Peel or Stripping Strength of
Adhesive Bonds
ASTM D905 (2008; E 2009) Strength Properties of Adhesive
Bonds in Shear by Compression Loading
ASTM D92 (2012b) Standard Test Method for Flash and Fire
Points by Cleveland Open Cup Tester
ASTM D923 (2007) Standard Practice for Sampling Electrical
Insulating Liquids
ASTM D924 (2008) Standard Test Method for Dissipation Factor
(or Power Factor) and Relative Permittivity
(Dielectric Constant) of Electrical Insulating
Liquids
ASTM D93 (2013; E 2014) Flash-Point by Pensky-Martens Closed
Cup Tester
ASTM D943 (2004a; E 2010; R 2010) Standard Test Method for
Oxidation Characteristics of Inhibited Mineral Oils
ASTM D946/D946M (2009a) Penetration-Graded Asphalt Cement for Use
in Pavement Construction
ASTM D953 (2010) Standard Test Method for Bearing Strength of
Plastics
ASTM D962 (1981; E 2008; R 2008) Aluminum Powder and Paste
Pigments for Paints
ASTM D968 (2005; R 2010) Abrasion Resistance of Organic
Page 123
Coatings by Falling Abrasive
ASTM D97 (2012) Pour Point of Petroleum Products
ASTM D974 (2012) Standard Test Method for Acid and Base
Number by Color-Indicator Titration
ASTM D975 (2013a) Standard Specification for Diesel Fuel Oils
ASTM D977 (2013; E 2014) Emulsified Asphalt
ASTM D979/D979M (2012) Sampling Bituminous Paving Mixtures
ASTM D98 (2005; R 2013) Calcium Chloride
ASTM D995 (1995b; R 2002) Mixing Plants for Hot-Mixed,
Hot-Laid Bituminous Paving Mixtures
ASTM DEFONLINE (2008) ASTM Online Dictionary of Engineering
Science and Technology
ASTM E1 (2013) Standard Specification for ASTM
Liquid-in-Glass Thermometers
ASTM E10 (2012) Brinell Hardness of Metallic Materials
ASTM E100 (2010) ASTM Hydrometers
ASTM E1042 (2002; E 2008; R 2008) Acoustically Absorptive
Materials Applied by Trowel or Spray
ASTM E1067/E1067M (2011) Acoustic Emission Examination of Fiberglass
Reinforced Plastic Resin (FRP) Tanks/Vessels
ASTM E108 (2011) Fire Tests of Roof Coverings
ASTM E11 (2013) Wire Cloth and Sieves for Testing Purposes
ASTM E110 (2010) Indentation Hardness of Metallic Materials
by Portable Hardness Testers
ASTM E1105 (2000; R 2008) Standard Test Method for Field
Determination of Water Penetration of Installed
Exterior Windows, Skylights, Doors, and Curtain
Walls, by Uniform or Cyclic Static Air Pressure
Difference
ASTM E1146 (2008) Standard Specification for Muriatic Acid
(Technical Grade Hydrochloric Acid)
ASTM E1155 (1996; R 2008) Standard Test Method for Determining
Floor Flatness and Floor Levelness Numbers
ASTM E1155M (1996; R 2008) Standard Test Method for Determining
Floor Flatness and Floor Levelness Numbers (Metric)
ASTM E1186 (2003; R 2009) Standard Practices for Air Leakage
Page 124
Site Detection in Building Envelopes and Air
Barrier Systems
ASTM E119 (2012a) Standard Test Methods for Fire Tests of
Building Construction and Materials
ASTM E122 (2009; E 2011) Calculating Sample Size to Estimate,
With a Specified Tolerable Error, the Average for
Characteristic of a Lot or Process
ASTM E125 (1963; R 2013) Photographs for Magnetic Particle
Indications on Ferrous Castings
ASTM E126 (2013a) Inspection and Verification of Hydrometers
ASTM E1264 (2008; E 2010) Acoustical Ceiling Products
ASTM E1274 (2003; R 2012) Standard Test Method for Measuring
Pavement Roughness Using a Profilograph
ASTM E1289 (2008) Standard Specification for Reference
Specimen for Sound Transmission Loss
ASTM E1300 (2012a; E 2012) Determining Load Resistance of
Glass in Buildings
ASTM E1333 (2010) Determining Formaldehyde Concentrations in
Air and Emission Rates from Wood Products Using a
Large Chamber
ASTM E1347 (2006; R 2011) Color and Color Difference
Measurement by Tristimulus (Filter) Colorimetry
ASTM E136 (2012) Behavior of Materials in a Vertical Tube
Furnace at 750 Degrees C
ASTM E1368 (2014) Visual Inspection of Asbestos Abatement
Projects
ASTM E1399/E1399M (1997; E 2013;R 2013) Cyclic Movement and Measuring
the Minimum and Maximum Joint Widths of
Architectural Joint Systems
ASTM E1414/E1414M (2011a) Airborne Sound Attenuation Between Rooms
Sharing a Common Ceiling Plenum
ASTM E1424 (1991; R 2008) Standard Test Method for Determining
the Rate of Air Leakage Through Exterior Windows,
Curtain Walls, and Doors Under Specified Pressure
and Temperature Differences Across the Specimen
ASTM E1477 (1998a; R 2013) Luminous Reflectance Factor of
Acoustical Materials by Use of Integrating-Sphere
Reflectometers
ASTM E1494 (2012) Encapsulants for Spray- or Trowel-Applied
Friable Asbestos-Containing Building Materials
Page 125
ASTM E152 (1981ae1) Fire Tests of Door Assemblies
ASTM E154/E154M (2008a; R 2013; E 2013) Water Vapor Retarders Used
in Contact with Earth Under Concrete Slabs, on
Walls, or as Ground Cover
ASTM E1592 (2005; R 2012) Structural Performance of Sheet
Metal Roof and Siding Systems by Uniform Static Air
Pressure Difference
ASTM E1613 (2012) Determination of Lead by Inductively Coupled
Plasma Atomic Emission Spectrometry (ICP-AES),
Flame Atomic Absorption Spectrometry (FAAS), or
Graphite Furnace Atomic Absorption Spectometry
(GFAAS) Techniques
ASTM E162 (2013) Surface Flammability of Materials Using a
Radiant Heat Energy Source
ASTM E164 (2013) Ultrasonic Contact Examination of Weldments
ASTM E1643 (2011) Standard Practice for Selection, Design,
Installation, and Inspection of Water Vapor
Retarders Used in Contact with Earth or Granular
Fill Under Concrete Slabs
ASTM E1644 (2004; E 2012; R 2012) Hot Plate Digestion of Dust
Wipe Samples for the Determination of Lead
ASTM E1646 (1995; R 2011) Standard Test Method for Water
Penetration of Exterior Metal Roof Panel Systems by
Uniform Air Pressure Difference
ASTM E165 (2009) Standard Test Method for Liquid Penetrant
Examination
ASTM E165/E165M (2012) Standard Practice for Liquid Penetrant
Examination for General Industry
ASTM E168 (2006) General Techniques of Infrared Quantitative
Analysis
ASTM E169 (2004; R 2009) General Techniques of
Ultraviolet-Visible Quantitative Analysis
ASTM E1726 (2001; R 2009) Preparation of Soil Samples by
Hotplate Digestion for Subsequent Lead Analysis
ASTM E1727 (2005) Field Collection of Soil Samples for Lead
Determination by Atomic Spectrometry Techniques
ASTM E1728 (2010) Collection of Settled Dust Samples Using
Wipe Sampling Methods for Subsequent Lead
Determination
ASTM E1745 (2011) Standard Specification for Water Vapor
Retarders Used in Contact with Soil or Granular
Page 126
Fill under Concrete Slabs
ASTM E1792 (2003; R 2011) Wipe Sampling Materials for Lead in
Surface Dust
ASTM E18 (2012) Standard Test Methods for Rockwell Hardness
of Metallic Materials
ASTM E1827 (2011) Standard Test Methods for Determining
Airtightness of Buildings Using an Orifice Blower
Door
ASTM E1886 (2013a) Standard Test Method for Performance of
Exterior Windows, Curtain Walls, Doors, and Impact
Protective Systems Impacted by Missile(s) and
Exposed to Cyclic Pressure Differentials
ASTM E1966 (2007; R 2011) Fire-Resistive Joint Systems
ASTM E1971 (2005; R 2011) Stewardship for the Cleaning of
Commercial and Institutional Buildings
ASTM E1991 (2005) Environmental Life Cycle Assessment of
Building Materials/Products
ASTM E1993/E1993M (1998; R 2013; E 2013) Standard Specification for
Bituminous Water Vapor Retarders Used in Contact
with Soil or Granular Fill Under Concrete Slabs
ASTM E1996 (2012a) Standard Specification for Performance of
Exterior Windows, Curtain Walls, Doors, and Impact
Protective Systems Impacted by Windborne Debris in
Hurricanes
ASTM E2016 (2011) Standard Specification for Industrial Woven
Wire Cloth
ASTM E2029 (2011) Standard Test Method for Volumetric and Mass
Flow Rate Measurement in a Duct Using Tracer Gas
Dilution
ASTM E204 (1998; R 2007) Identification of Material by
Infrared Absorption Spectroscopy, Using the ASTM
Coded Band and Chemical Classification Index
ASTM E2074 (2000e1) Standard Test Method for Fire Tests of
Door Assemblies, Including Positive Pressure
Testing of Side-Hinged and Pivoted Swinging Door
Assemblies
ASTM E2098/E2098M (2013) Determining Tensile Breaking Strength of
Glass Fiber Reinforcing Mesh for Use in Class PB
Exterior Insulation and Finish Systems (EIFS) after
Exposure to a Sodium Hydroxide Solution
ASTM E2112 (2007) Standard Practice for Installation of
Exterior Windows, Doors and Skylights
Page 127
ASTM E2114 (2008) Standard Terminology for Sustainability
Relative to the Performance of Buildings
ASTM E2129 (2010) Standard Practice for Data Collection for
Sustainability Assessment of Building Products
ASTM E2140 (2001; R 2009) Standard Test Method for Water
Penetration of Metal Roof Panel Systems by Static
Water Pressure Head
ASTM E2174 (2010a; E 2011) Standard Practice for On-Site
Inspection of Installed Fire Stops
ASTM E2190 (2010) Standard Specification for Insulating Glass
Unit Performance and Evaluation
ASTM E2226 (2012) Standard Practice for Application of Hose
Stream
ASTM E2231 (2009) Specimen Preparation and Mounting of Pipe
and Duct Insulation Materials to Assess Surface
Burning Characteristics
ASTM E228 (2011) Standard Test Method for Linear Thermal
Expansion of Solid Materials with a Push-Rod
Dilatometer
ASTM E230/E230M (2012) Standard Specification and
Temperature-Electromotive Force (emf) Tables for
Standardized Thermocouples
ASTM E2307 (2010) Standard Test Method for Determining Fire
Resistance of Perimeter Fire Barrier Systems Using
Intermediate-Scale, Multi-story Test Apparatus
ASTM E2336 (2004; R 2013) Standard Test Methods for Fire
Resistive Grease Duct Enclosure Systems
ASTM E2356 (2014) Standard Practice for Comprehensive Building
Asbestos Surveys
ASTM E2393 (2010a) Standard Practice for On-Site Inspection of
Installed Fire Resistive Joint Systems and
Perimeter Fire Barriers
ASTM E2461 (2012) Standard Practice for Determining the
Thickness of Glass in Airport Traffic Control Tower
Cabs
ASTM E2485 (2006) Standard Test Method for Freeze/Thaw
Resistance of Exterior Insulation and Finish
Systems (EIFS) and Water Resistive Barrier Coatings
ASTM E2486 (2006) Standard Test Method for Impact Resistance
of Class PB and PI Exterior Insulation and Finish
Systems (EIFS)
Page 128
ASTM E2634 (2011) Standard Specification for Flat Wall
Insulating Concrete Form (ICF) Systems
ASTM E2659 (2009; E 2010) Standard Practice for Certificate
Programs
ASTM E28 (1999; R 2009) Softening Point of Resins Derived
from Naval Stores by Ring and Ball Apparatus
ASTM E283 (2004; R 2012) Determining the Rate of Air Leakage
Through Exterior Windows, Curtain Walls, and Doors
Under Specified Pressure Differences Across the
Specimen
ASTM E290 (2013) Bend Testing of Material for Ductility
ASTM E308 (2013) Computing the Colors of Objects by Using the
CIE System
ASTM E329 (2013b) Standard Specification for Agencies Engaged
in the Testing and/or Inspection of Materials Used
in Construction
ASTM E330 (2002; R 2010) Structural Performance of Exterior
Windows, Doors, Skylights and Curtain Walls by
Uniform Static Air Pressure Difference
ASTM E330/E330M (2014) Structural Performance of Exterior Windows,
Doors, Skylights and Curtain Walls by Uniform
Static Air Pressure Difference
ASTM E331 (2000; R 2009) Water Penetration of Exterior
Windows, Skylights, Doors, and Curtain Walls by
Uniform Static Air Pressure Difference
ASTM E336 (2011) Measurement of Airborne Sound Insulation in
Buildings
ASTM E337 (2002; R 2007) Measuring Humidity with a
Psychrometer (The Measurement of Wet- and Dry-Bulb
Temperatures)
ASTM E34 (2011) Chemical Analysis of Aluminum and
Aluminum-Base Alloys
ASTM E376 (2011) Measuring Coating Thickness by
Magnetic-Field or Eddy-Current (Electromagnetic)
Test Methods
ASTM E381 (2001; R 2012) Macroetch Testing Steel Bars,
Billets, Blooms, and Forgings
ASTM E390 (2011) Radiographs Steel Fusion Welds
ASTM E413 (2010) Rating Sound Insulation
ASTM E438 (1992; R 2011) Glasses in Laboratory Apparatus
Page 129
ASTM E446 (2010) Radiographs for Steel Castings Up to 2 In.
(51mm) in Thickness
ASTM E488/E488M (2010) Standard Test Methods for Strength of
Anchors in Concrete and Masonry Elements
ASTM E514/E514M (2011) Standard Test Method for Water Penetration
and Leakage Through Masonry
ASTM E515 (2011) Leaks Using Bubble Emission Techniques
ASTM E543 (2013) Standard Practice for Agencies Performing
Non-Destructive Testing
ASTM E546 (2008) Frost Point of Sealed Insulating Glass Units
ASTM E557 (2012) Installation of Operable Partitions
ASTM E576 (2008) Frost Point of Sealed Insulating Glass Units
in the Vertical Position
ASTM E580/E580M (2011; E 2013) Application of Ceiling Suspension
Systems for Acoustical Tile and Lay-In Panels in
Areas Requiring Moderate Seismic Restraint
ASTM E596 (1996; R 2009) Laboratory Measurement of Noise
Reduction of Sound-Isolating Enclosures
ASTM E605 (1993; R 2011) Thickness and Density of Sprayed
Fire-Resistive Material (SFRM) Applied to
Structural Members
ASTM E648 (2010; E 2011) Standard Test Method for Critical
Radiant Flux of Floor-Covering Systems Using a
Radiant Heat Energy Source
ASTM E661 (2003; R 2009) Standard Test Method for Performance
of Wood and Wood-Based Floor and Roof Sheathing
Under Concentrated Static and Impact Loads
ASTM E662 (2013d) Standard Test Method for Specific Optical
Density of Smoke Generated by Solid Materials
ASTM E695 (2003; R 2009) Measuring Relative Resistance of
Wall, Floor, and Roof Construction to Impact Loading
ASTM E699 (2009) Standard Practice for Evaluation of Agencies
Involved in Testing, Quality Assurance, and
Evaluating of Building Components
ASTM E709 (2008) Standard Guide for Magnetic Particle
Examination
ASTM E72 (2013a) Conducting Strength Tests of Panels for
Building Construction
ASTM E736 (2000; R 2011) Cohesion/Adhesion of Sprayed
Page 130
Fire-Resistive Materials Applied to Structural
Members
ASTM E759 (1992; R 2011) Effect of Deflection on Sprayed
Fire-Resistive Material Applied to Structural
Members
ASTM E760 (1992; R 2011) Effect of Impact on Bonding of
Sprayed Fire-Resistive Material Applied to
Structural Members
ASTM E761 (1992; R 2011) Compressive Strength of Sprayed
Fire-Resistive Material Applied to Structural
Members
ASTM E774 (1997) Classification of the Durability of Sealed
Insulating Glass Units
ASTM E779 (2010) Standard Test Method for Determining Air
Leakage Rate by Fan Pressurization
ASTM E783 (2002; R 2010) Standard Test Method for Field
Measurement of Air Leakage Through Installed
Exterior Windows and Doors
ASTM E795 (2005; R 2012) Mounting Test Specimens During Sound
Absorption Tests
ASTM E814 (2013a) Standard Test Method for Fire Tests of
Through-Penetration Fire Stops
ASTM E831 (2013) Linear Thermal Expansion of Solid Materials
by Thermomechanical Analysis
ASTM E84 (2013a) Standard Test Method for Surface Burning
Characteristics of Building Materials
ASTM E859 (1993; R 2011) Air Erosion of Sprayed
Fire-Resistive Materials (SFRMS) Applied to
Structural Members
ASTM E90 (2009) Standard Test Method for Laboratory
Measurement of Airborne Sound Transmission Loss of
Building Partitions and Elements
ASTM E937 (1993; R 2011) Corrosion of Steel by Sprayed
Fire-Resistive Material (SFRM) Applied to
Structural Members
ASTM E94 (2004; R 2010) Radiographic Examination
ASTM E953/E953M (2008) Fusibility of Refuse-Derived Fuel (RDF) Ash
ASTM E96/E96M (2013) Standard Test Methods for Water Vapor
Transmission of Materials
ASTM F1007 (1986; R 2007) Pipeline Expansion Joints of the
Page 131
Packed Slip Type for Marine Application
ASTM F1015 (2003; R 2009) Relative Abrasiveness of Synthetic
Turf Playing Surfaces
ASTM F104 (2011) Standard Classification System for
Nonmetallic Gasket Materials
ASTM F1040 (1987; R 2007) Standard Specification for Filter
Units, Air Conditioning, Viscous – Impingement and
Dry Types, Replaceable
ASTM F1043 (2013) Strength and Protective Coatings on Metal
Industrial Chain-Link Fence Framework
ASTM F1055 (2013) Electrofusion Type Polyethylene Fittings for
Outside Diameter Controlled Polyethylene Pipe and
Tubing
ASTM F1056 (2004; R 2011) Socket Fusion Tools for Use in
Socket Fusion Joining Polyethylene Pipe or Tubing
and Fittings
ASTM F1066 (2004; E 2010; R 2010) Standard Specification for
Vinyl Composition Floor Tile
ASTM F1077 (2005) Selection of Committee F-16 Fastener
Specifications
ASTM F1083 (2013) Standard Specification for Pipe, Steel,
Hot-Dipped Zinc Coated (Galvanized) Welded, for
Fence Structures
ASTM F1097 (1991; R 2012) Mortar, Refractory
(High-Temperature, Air-Setting)
ASTM F1105 (2009) Preparing Aircraft Cleaning Compounds,
Liquid-Type, Temperature-Sensitive, or
Solvent-Based, for Storage Stability Testing
ASTM F1120 (1987; R 2010) Standard Specification for Circular
Metallic Bellows Type Expansion Joints for Piping
Applications
ASTM F1139 (1988; R 2010) Steam Traps and Drains
ASTM F1172 (1988; R 2010) Standard Specification for Fuel Oil
Meters of the Volumetric Positive Displacement Type
ASTM F1182 (2007; R 2013) Anodes, Sacrificial Zinc Alloy
ASTM F1184 (2005; R 2010) Industrial and Commercial Horizontal
Slide Gates
ASTM F1199 (1988; R 2010) Cast (All Temperatures and
Pressures) and Welded Pipe Line Strainers (150 psig
and 150 degrees F Maximum)
Page 132
ASTM F1200 (1988; R 2010) Fabricated (Welded) Pipe Line
Strainers (Above 150 psig and 150 degrees F)
ASTM F1216 (2009) Standard Practice for Rehabilitation of
Existing Pipelines and Conduits by the Inversion
and Curing of a Resin-Impregnated Tube
ASTM F1233 (2008; R 2013) Security Glazing Materials and
Systems
ASTM F1267 (2012) Metal, Expanded, Steel
ASTM F1290 (1998a; R 2011) Electrofusion Joining Polyolefin
Pipe and Fittings
ASTM F1292 (2013) Impact Attenuation of Surface Systems Under
and Around Playground Equipment
ASTM F1303 (2004; R 2009) Sheet Vinyl Floor Covering with
Backing
ASTM F1344 (2012; E 2013) Rubber Floor Tile
ASTM F1412 (2009) Standard Specification for Polyolefin Pipe
and Fittings for Corrosive Waste Drainage Systems
ASTM F1417 (2011a) Standard Test Method for Installation
Acceptance of Plastic Gravity Sewer Lines Using Low
Pressure Air
ASTM F147 (1987; R 2009) Standard Test Method for Flexibility
of Non-Metallic Gasket Material
ASTM F1476 (2007; R 2013) Standard Specification for
Performance of Gasketed Mechanical Couplings for
Use in Piping Applications
ASTM F148 (2013) Binder Durability of Cork Composition Gasket
Materials
ASTM F1482 (2004; E 2009; R 2009) Installation and Preparation
of Panel Type Underlayments to Receive Resilient
Flooring
ASTM F1483 (2012) Oriented Poly(Vinyl Chloride), PVCO,
Pressure Pipe
ASTM F1487 (2011) Playground Equipment for Public Use
ASTM F150 (2006; R 2013) Electrical Resistance of Conductive
and Static Dissipative Resilient Flooring
ASTM F1508 (1996; R 2010) Angle Style, Pressure Relief Valves
for Steam, Gas, and Liquid Services
ASTM F152 (1995; R 2009) Tension Testing of Nonmetallic
Gasket Materials
Page 133
ASTM F1545 (1997; R 2009) Standard Specification for
Plastic-Lined Ferrous Metal Pipe, Fittings and
Flanges
ASTM F1554 (2007a; E 2011) Standard Specification for Anchor
Bolts, Steel, 36, 55, and 105-ksi Yield Strength
ASTM F1642 (2012) Standard Test Method for Glazing and Glazing
Systems Subject to Airblast Loadings
ASTM F1667 (2013) Driven Fasteners: Nails, Spikes, and Staples
ASTM F1679 (2004e1) Standard Test Method for Using a Variable
Incidence Tribometer
ASTM F1697 (2009) Standard Specification for Poly(Vinyl
Chloride) (PVC) Profile Strip for Machine
Spiral-Wound Liner Pipe Rehabilitation of Existing
Sewers and Conduit
ASTM F1700 (2013a) Solid Vinyl Floor Tile
ASTM F1741 (2008) Standard Practice for Installation of
Machine Spiral Wound Poly (Vinyl Chloride) (PVC)
Liner Pipe for Rehabilitation of Existing Sewers
and Conduits
ASTM F1743 (2008) Standard Practice for Rehabilitation of
Existing Pipeline and Conduits by Pulled-In-Place
Installation of Cured-In-Place Thermosetting Resin
Pipe (CIPP)
ASTM F1760 (2001; R 2011) Coextruded Poly(Vinyl Chloride)
(PVC) Non-Pressure Plastic Pipe Having
Reprocessed-Recycled Content
ASTM F1803 (2006) Standard Specification for Poly (Vinyl
Chloride)(PVC) Closed Profile Gravity Pipe and
Fittings Based on Controlled Inside Diameter
ASTM F1852 (2011) Standard Specification for “Twist Off” Type
Tension Control Structural Bolt/Nut/Washer
Assemblies, Steel, Heat Treated, 120/105 ksi
Minimum Tensile Strength
ASTM F1859 (2012) Rubber Sheet Floor Covering Without Backing
ASTM F1860 (2012) Rubber Sheet Floor Covering With Backing
ASTM F1861 (2008; E 2012; R 2012) Resilient Wall Base
ASTM F1869 (2011) Measuring Moisture Vapor Emission Rate of
Concrete Subfloor Using Anhydrous Calcium Chloride
ASTM F1913 (2004; R 2010) Vinyl Sheet Floor Covering Without
Backing
Page 134
ASTM F1941 (2010) Standard Specification for Electrodeposited
Coatings on Threaded Fasteners (Unified Inch Screw
Threads (UN/UNR))
ASTM F1941M (2007) Standard Specification for Electrodeposited
Coatings on Threaded Fasteners (Metric)
ASTM F1951 (2009b) Standard Specification for Determination of
Accessibility of Surface Systems Under and Around
Playground Equipment
ASTM F2015 (2000; R 2013) Standard Specification for Lap Joint
Flange Pipe End Applications
ASTM F2034 (2008; R 2013) Sheet Linoleum Floor Covering
ASTM F2155 (2001; R 2009) Standard Specification for
Performance of Hasps and Other Attachment Devices
for Padlocks of Seals
ASTM F2160 (2010) Standard Specification for Solid Wall High
Density Polyethylene (HDPE) Conduit Based on
Controlled Outside Diameter (OD)
ASTM F2169 (2012) Resilient Stair Treads
ASTM F2170 (2011) Determining Relative Humidity in Concrete
Floor Slabs in situ Probes
ASTM F2192 (2005; R 2011) Standard Test Method for Determining
and Reporting the Berthing Energy and Reaction of
Marine Feeders
ASTM F2195 (2013) Linoleum Floor Tile
ASTM F2248 (2012) Standard Practice for Specifying an
Equivalent 3-Second Duration Design Loading for
Blast Resistant Glazing Fabricated with Laminated
Glass
ASTM F2280 (2012) Standard Specification for “Twist Off” Type
Tension Control Structural Bolt/Nut/Washer
Assemblies, Steel, Heat Treated, 150 ksi Minimum
Tensile Strength
ASTM F2329 (2013) Zinc Coating, Hot-Dip, Requirements for
Application to Carbon and Alloy Steel Bolts,
Screws, Washers, Nuts, and Special Threaded
Fasteners
ASTM F2373 (2011) Standard Consumer Safety Performance
Specification for Public Use Play Equipment for
Children 6 Months through 23 Months
ASTM F2387 (2004; R 2012) Standard Specification for
Manufactured Safety Vacuum Release Systems (SVRS)
for Swimming Pools, Spas, and Hot Tubs
Page 135
ASTM F2389 (2010) Standard Specification for Pressure-rated
Polypropylene (PP) Piping Systems
ASTM F2618 (2009) Standard Specification for Chlorinated Poly
(Vinyl Chloride) (CPVC) Pipe and Fittings for
Chemical Waste Drainage Systems
ASTM F2620 (2013) Standard Practice for Heat Fusion Joining of
Polyethylene Pipe and Fittings
ASTM F2656 (2007) Standard Test Method for Vehicle Crash
Testing of Perimeter Barriers
ASTM F2736 (2013) Standard Specification for 6 to 30 in. (152
To 762 mm) Polypropylene (PP) Corrugated Single
Wall Pipe And Double Wall Pipe
ASTM F2764/F2764M (2011; E 2013) Standard Specification for 30 to 60
in. [750 to 1500 mm] Polypropylene (PP) Triple Wall
Pipe and Fittings for Non-Pressure Sanitary Sewer
Applications
ASTM F2786 (2010) Standard Practice for Field Leak Testing of
Polyethylene (PE) Pressure Piping Systems Using
Gaseous Media Under Pressure (Pneumatic Leak
Testing)
ASTM F2881 (2011) Standard Specification for 12 to 60 in. (300
to 1500 mm) Polypropylene (PP) Dual Wall Pipe and
Fittings for Non-Pressure Storm Sewer Applications
ASTM F2912 (2011) Standard Specification for Glazing and
Glazing Systems Subject to Airblast Loadings
ASTM F312 (2008) Standard Test Methods for Microscopical
Sizing an Counting Particles from Aerospace Fluids
on Membrane Filters
ASTM F331 (2013) Standard Test Method for Nonvolatile Residue
of Solvent Extract from Aerospace Components (Using
Flash Evaporator)
ASTM F336 (2002; R 2009) Design and Construction of
Nonmetallic Enveloped Gaskets for Corrosive Service
ASTM F36 (1999; R 2009) Compressibility and Recovery of
Gasket Materials
ASTM F402 (2005; R 2012) Safe Handling of Solvent Cements,
Primers, and Cleaners Used for Joining
Thermoplastic Pipe and Fittings
ASTM F405 (2013) Corrugated Polyethylene (PE) Tubing and
Fittings
ASTM F409 (2012) Thermoplastic Accessible and Replaceable
Plastic Tube and Tubular Fittings
Page 136
ASTM F428 (2009) Intensity of Scratches on Aerospace Glass
Enclosures
ASTM F436 (2011) Hardened Steel Washers
ASTM F436M (2011) Hardened Steel Washers (Metric)
ASTM F437 (2009) Standard Specification for Threaded
Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic
Pipe Fittings, Schedule 80
ASTM F438 (2009) Standard Specification for Socket-Type
Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic
Pipe Fittings, Schedule 40
ASTM F439 (2013) Standard Specification for Chlorinated
Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings,
Schedule 80
ASTM F441/F441M (2013; E 2013) Standard Specification for
Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic
Pipe, Schedules 40 and 80
ASTM F442/F442M (2013; E 2013) Standard Specification for
Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic
Pipe (SDR-PR)
ASTM F446 (1985; R 2009) Grab Bars and Accessories Installed
in the Bathing Area
ASTM F467 (2013; E 2014) Standard Specification for
Nonferrous Nuts for General Use
ASTM F468 (2012) Nonferrous Bolts, Hex Cap Screws, and Studs
for General Use
ASTM F477 (2010) Standard Specification for Elastomeric Seals
(Gaskets) for Joining Plastic Pipe
ASTM F480 (2012) Thermoplastic Well Casing Pipe and Couplings
Made in Standard Dimension Ratios (SDR), SCH 40 and
SCH 80
ASTM F493 (2010) Solvent Cements for Chlorinated Poly (Vinyl
Chloride) (CPVC) Plastic Pipe and Fittings
ASTM F512 (2012) Smooth-Wall Poly (Vinyl Chloride) (PVC)
Conduit and Fittings for Underground Installation
ASTM F520 (2010) Environmental Resistance of Aerospace
Transparencies
ASTM F521 (1983; R 2010) Bond Integrity of Transparent
Laminates
ASTM F547 (2006; R 2012) Nails for Use with Wood and
Wood-Base Materials
Page 137
ASTM F548 (2009) Intensity of Scratches on Aerospace
Transparent Plastics
ASTM F567 (2011a) Standard Practice for Installation of Chain
Link Fence
ASTM F568M (2007) Standard Specification for Carbon and Alloy
Steel Externally Threaded Metric Fasteners
ASTM F585 (2013) Standard Practice for Insertion of Flexible
Polyethylene Pipe into Existing Sewers
ASTM F593 (2013a) Stainless Steel Bolts, Hex Cap Screws, and
Studs
ASTM F594 (2009; E 2011) Standard Specification for Stainless
Steel Nuts
ASTM F626 (2008; R 2013) Standard Specification for Fence
Fittings
ASTM F628 (2012; E 2013) Acrylonitrile-Butadiene-Styrene
(ABS) Schedule 40 Plastic Drain, Waste, and Vent
Pipe with a Cellular Core
ASTM F656 (2010) Primers for Use in Solvent Cement Joints of
Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
ASTM F667 (2012) Large Diameter Corrugated Polyethylene Pipe
and Fittings
ASTM F668 (2011) Poly(Vinyl Chloride) (PVC) and other Organic
Polymer-Coated Steel Chain-Link Fence Fabric
ASTM F679 (2013a) Poly(Vinyl Chloride) (PVC) Large-Diameter
Plastic Gravity Sewer Pipe and Fittings
ASTM F710 (2011) Standard Practice for Preparing Concrete
Floors to Receive Resilient Flooring
ASTM F714 (2013) Polyethylene (PE) Plastic Pipe (SDR-PR)
Based on Outside Diameter
ASTM F735 (2011) Abrasion Resistance of Transparent Plastics
and Coatings Using the Oscillating Sand Method
ASTM F758 (1995; E 2007; R 2007) Smooth-Wall Poly(Vinyl
Chloride) (PVC) Plastic Underdrain Systems for
Highway, Airport, and Similar Drainage
ASTM F791 (1996; R 2013) Stress Crazing of Transparent
Plastics
ASTM F793 (2010a) Wallcovering by Durability Characteristics
ASTM F794 (2003; R 2009) Standard Specification for
Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer
Page 138
Pipe and Fittings Based on Controlled Inside
Diameter
ASTM F835 (2013) Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws
ASTM F835M (2011) Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws (Metric)
ASTM F836M (2002; R 2010) Standard Specification for Style 1
Stainless Steel Metric Nuts
ASTM F842 (2013) Measuring the Forced Entry Resistance of
Sliding Door Assemblies, Excluding Glazing Impact
ASTM F844 (2007a; R 2013) Washers, Steel, Plain (Flat),
Unhardened for General Use
ASTM F851 (1987; R 2013) Standard Test Method for Self-Rising
Seat Mechanisms
ASTM F872 (1984; R 1990) Filter Units, Air Conditioning:
Viscous-Impingement Type, Cleanable
ASTM F876 (2013a) Crosslinked Polyethylene (PEX) Tubing
ASTM F877 (2011a) Crosslinked Polyethylene (PEX) Plastic Hotand
Cold-Water Distribution Systems
ASTM F883 (2013) Padlocks
ASTM F891 (2010) Coextruded Poly (Vinyl Chloride) (PVC)
Plastic Pipe with a Cellular Core
ASTM F894 (2013) Polyethylene (PE) Large Diameter Profile
Wall Sewer and Drain Pipe
ASTM F900 (2011) Industrial and Commercial Swing Gates
ASTM F949 (2010) Poly(Vinyl Chloride) (PVC) Corrugated Sewer
Pipe with a Smooth Interior and Fittings
ASTM F959 (2013) Compressible-Washer-Type Direct Tension
Indicators for Use with Structural Fasteners
ASTM F959M (2013) Compressible-Washer-Type Direct Tension
Indicators for Use with Structural Fasteners
(Metric)
ASTM G109 (2007; R 2013) Determining the Effects of Chemical
Admixtures on the Corrosion of Embedded Steel
Reinforcement in Concrete Exposed to Chloride
Environments E(2000)
ASTM G152 (2013) Operating Open Flame Carbon Arc Light
Apparatus for Exposure of Nonmetallic Materials
Page 139
ASTM G153 (2013) Operating Enclosed Carbon Arc Light
Apparatus for Exposure of Nonmetallic Materials
ASTM G154 (2012a) Standard Practice for Operating Fluorescent
Light Apparatus for UV Exposure of Nonmetallic
Materials
ASTM G155 (2013) Standard Practice for Operating Xenon Arc
Light Apparatus for Exposure of Non-Metallic
Materials
ASTM G21 (2013) Determining Resistance of Synthetic
Polymeric Materials to Fungi
ASTM G53 (1996) Operating Light- and Water-Exposure
Apparatus (Fluorescent UV-Condensation Type) for
Exposure of Nonmetallic Materials
ASTM G60 (2001; R 2013) Conducting Cyclic Humidity Exposures
ASTM G71 (1981; R 2009) Standard Guide for Conducting and
Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G82 (1998; R 2009) Standard Guide for Development and
Use of a Galvanic Series for Predicting Galvanic
Corrosion Performance
ASTM SI10 (2010) American National Standard for Use of the
International System of Units (SI): The Modern
Metric System
BAY AREA AIR QUALITY MANAGEMENT DISTRICT (Bay Area AQMD)
Bay Area AQMD Rule 8-51 (1992; R 2001) Adhesive and Sealant Products
BIFMA INTERNATIONAL (BIFMA)
ANSI/BIFMA X5.5 (2008) Desk Products
ANSI/BIFMA X5.6 (2010) Panel Systems
BIOCYCLE, JOURNAL OF COMPOSTING AND RECYCLING (BIOCYCLE)
BIOCYCLE (Article – Nov 1995, Vol 36, Issue 11) Standardized
Test for Evaluation of Compost Self-Heating;
Briton, W.F.Jr, et. al.
BRITISH STANDARDS INSTITUTE (BSI)
BS EN 13121-3 (2008; AMD 2012; AMD 2011) GRP Tanks and Vessels
for Use Above Ground — Part 3: Design and
Workmanship
BS EN ISO 10497 (2010) Testing of Valves Fire Type-Testing
Requirements
BUILDERS HARDWARE MANUFACTURERS ASSOCIATION (BHMA)
Page 140
ANSI/BHMA A156.1 (2013) Butts and Hinges
ANSI/BHMA A156.10 (2011) Power Operated Pedestrian Doors
ANSI/BHMA A156.11 (2010) Cabinet Locks
ANSI/BHMA A156.115 (2006) Hardware Preparation in Steel Doors and
Steel Frames
ANSI/BHMA A156.12 (2013) Interconnected Locks & Latches
ANSI/BHMA A156.13 (2012) Mortise Locks & Latches Series 1000
ANSI/BHMA A156.16 (2013) Auxiliary Hardware
ANSI/BHMA A156.17 (2004; R 2010) Self Closing Hinges & Pivots
ANSI/BHMA A156.18 (2012) Materials and Finishes
ANSI/BHMA A156.2 (2011) Bored and Preassembled Locks and Latches
ANSI/BHMA A156.20 (2006; R 2012) Strap and Tee Hinges, and Hasps
ANSI/BHMA A156.21 (2009) Thresholds
ANSI/BHMA A156.3 (2008) Exit Devices
ANSI/BHMA A156.4 (2013) Door Controls – Closers
ANSI/BHMA A156.5 (2010) Auxiliary Locks and Associated Products
ANSI/BHMA A156.6 (2010) Architectural Door Trim
ANSI/BHMA A156.7 (2003; R 2009) Template Hinge Dimensions
ANSI/BHMA A156.8 (2010) Door Controls – Overhead Stops and Holders
ANSI/BHMA A156.9 (2010) Cabinet Hardware
BHMA A156.15 (2011) Release Devices Closer Holder,
Electromagnetic and Electromechanical
BHMA A156.22 (2012) Door Gasketing and Edge Seal Systems
CALIFORNIA ENERGY COMMISSION (CEC)
CEC Title 24 (2008; Effective Jan 2010) California’s Energy
Efficiency Standards for Residential and
Nonresidential Buildings
CARPET AND RUG INSTITUTE (CRI)
CRI CIS (2011) Carpet Installation Standard
CAST IRON SOIL PIPE INSTITUTE (CISPI)
Page 141
CISPI 301 (2009) Hubless Cast Iron Soil Pipe and Fittings for
Sanitary and Storm Drain, Waste, and Vent Piping
Applications
CISPI 310 (2011) Coupling for Use in Connection with Hubless
Cast Iron Soil Pipe and Fittings for Sanitary and
Storm Drain, Waste, and Vent Piping Applications
CEILINGS & INTERIOR SYSTEMS CONSTRUCTION ASSOCIATION (CISCA)
CISCA Access Floors (2007) Recommended Test Procedures for Access Floors
CENTERS FOR DISEASE CONTROL AND PREVENTION (CDC)
CDC BMBL (2009) Biosafety in Microbiological and Biomedical
Laboratories, 5th Edition
CHEMICAL FABRICS & FILM ASSOCIATION (CFFA)
CFFA-W-101-D (2002) Quality Standard for Vinyl Coated Fabric
Wallcovering
CHLORINE INSTITUTE (CI)
CI Pamphlet 1 (2008) Chlorine Basics, Edition 7
CI Pamphlet 6 (2005) Piping Systems for Dry Chlorine, edition 15
COMPOSITE PANEL ASSOCIATION (CPA)
CPA A208.1 (2009) Particleboard
CPA A208.2 (2009) Medium Density Fiberboard (MDF) for Interior
Applications
COMPRESSED AIR AND GAS INSTITUTE (CAGI)
CAGI B19.1 (2010) Safety Standard for Compressor Systems
COMPRESSED GAS ASSOCIATION (CGA)
CGA G-10.1 (2008) Commodity Specification for Nitrogen; 7th
Edition
CGA G-4.1 (2009) Cleaning Equipment for Oxygen Service; 6th
Edition
CGA G-4.4 (2012) Oxygen Pipeline Systems; 4th Edition
CGA G-7 (2008) Compressed Air for Human Respiration; 6th
Edition
CGA G-7.1 (2011) Commodity Specification for Air; 5th Edition
CGA HB (1999) Handbook of Compressed Gases; 4th Edition
Page 142
CGA M-1 (2013) Guide for Medical Gas Supply Systems at
Consumer Sites; 2nd Edition
CGA P-1 (2008) Safe Handling of Compressed Gases in
Containers; 11th Edition
CGA P-39 (2008) Oxygen-Rich Atmospheres; 2nd Edition
CGA V-5 (2008; R 2013) Diameter-Index Safety System
(Non-Interchangeable Low Pressure Connections for
Medical Gas Applications); 6th Edition
CONCRETE REINFORCING STEEL INSTITUTE (CRSI)
CRSI 10MSP (2009; 28th Ed) Manual of Standard Practice
CONCRETE SAWING AND DRILLING ASSOCIATION (CSDA)
CSDA-W-104 (June 1, 1998; R 2007) Track Mounted Wall Sawing
CONSUMER ELECTRONICS ASSOCIATION (CEA)
CEA 170 (1957) Electrical Performance Standards -
Monochrome Television Studio Facilities
CEA-709.1-C (2010) Control Network Protocol Specification
CEA-709.3 (1999; R 2004) Free-Topology Twisted-Pair Channel
Specification
CEA-852-B (2010) Tunneling Component Network Protocols Over
Internet Protocol Channels
CONSUMER PRODUCT SAFETY COMMISSION (CPSC)
CPSC Pub No 325 (2010) Handbook for Public Playground Safety
CONVEYOR EQUIPMENT MANUFACTURERS ASSOCIATION (CEMA)
CEMA B105.1 (2009) Welded Steel Conveyor Pulleys with
Compression Type Hubs
CEMA Belt Book (2007) Belt Conveyors for Bulk Materials
COOLING TECHNOLOGY INSTITUTE (CTI)
CTI ATC-105 (2000) Acceptance Test Code
CTI ESG-114 (2007) Design of Cooling Towers with Douglas Fir
Lumber
CTI STD-111 (2009) Gear Speed Reducers
CTI STD-134 (2007) Plywood for Use in Cooling Towers
CTI Std-103 (2007) Redwood Lumber Specifications
Page 143
CTI Std-112 (2009) Pressure Preservative Treatment of Lumber
CTI Std-137 (2013) Fiberglass Pultruded Structural Products for
Use in Cooling Towers
CTI Std-201 (2011) Standard for the Certification of Water
Cooling Tower Thermal Performance
COPPER DEVELOPMENT ASSOCIATION (CDA)
CDA A4015 (2010) Copper Tube Handbook
CDA A4050 Copper in Architecture – Design Handbook
CRANE MANUFACTURERS ASSOCIATION OF AMERICA (CMAA)
CMAA 70 (2010) Specification for Top Running Bridge and
Gantry Type Multiple Girder Electric Overhead
Traveling Cranes, No. 70
CMAA 74 (2010) Specifications for Top Running and Under
Running Single Girder Electric Overhead Cranes
Utilizing Under Running Trolley Hoist, No. 74
CSA AMERICA, INC (CSA/AM)
CSA/AM CSA/ANSI LC 1 (2005; Addenda 1B 2011) Fuel Gas Piping Systems
Using Corrugated Stainless Steel Tubing (CSST)
CSA STANDARDS (CSA)
CGA 3.11-M88 (1988; R 2009) Lever Operated Pressure Lubricated
Plug Type Gas Shut-Off Valves
CGA 3.16-M88 (1988; R 2009) Lever Operated Non-Lubricated Gas
Shut-Off Valves
CGA 9.2-M88 (1988; R 2009) Manually Operated Shut-Off Valves
for Gas Piping Systems
CSA A23.4 (2009; Update 2010) Precast Concrete – Materials
and Construction
CSA C22.2 No. 109 (1981; R 2013) Commercial Cooking Appliances
CSA Directory (updated continuously online) Product Index
DISTRICT OF COLUMBIA MUNICIPAL REGULATIONS (DCMR)
20 DCMR (1997) Environment – Chapters 40 to 70, Subtitle E:
Hazardous Waste, Chapters 40 – 70
DOOR AND ACCESS SYSTEM MANUFACTURERS ASSOCIATION (DASMA)
ANSI/DASMA 102 (2011) Specifications for Sectional Overhead-Type
Doors
Page 144
ANSI/DASMA 108 (2005) Standard Method for Testing Sectional Garage
Doors and Rolling Doors: Determination of
Structural Performance Under Uniform Static Air
Pressure Difference
DUCTILE IRON PIPE RESEARCH ASSOCIATION (DIPRA)
DIPRA TRD (2006) Thrust Restraint Design for Ductile Iron Pipe
ELECTRICAL GENERATING SYSTEMS ASSOCIATION (EGSA)
EGSA 101P (1995) Performance Standard for Engine Driven
Generator Sets
ELECTRONIC COMPONENTS ASSOCIATION (ECA)
ECA EIA/ECA 310 (2005) Cabinets, Racks, Panels, and Associated
Equipment
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
ANSI/TIA-455-80C (2003) FOTP-80 – IEC 60793-1-144 Optical fibres
Part 1-44: Measurement Methods and Test Procedures
- Cut-off Wavelength
EIA 416 (1974; R 1981) Filters for Radio Interference
EIA 443 (1979) NARM Standard for Solid State Relays Service
EIA 480 (1981) Toggle Switches
EIA/IS 46 (1987) Test Procedure for Resistance to Soldering
(Vapor Phase Technique) for Surface Mount Devices
TIA/EIA 455-41-A (1993a; R 2001) FOTP-41 – Compressive Loading
Resistance of Fiber Optic Cables
ELECTROSTATIC DISCHARGE ASSOCIATION (ESD)
ESD S6.1 (2009) Grounding
ESD S7.1 (2012) Resistive Characterization of Floor Materials
ENERGY INSTITUTE (EI)
EI 1529 (2005; 6th Ed) Aviation Fueling Hose and Hose
Assemblies
EI 1581 (2011) Specifications and Qualification Procedures
for Aviation Jet Fuel Filter/Separators
EI 1584 (2001; Addenda 2007; 3rd Ed) Four-Inch Hydrant
System Components and Arrangements (Hydrant Pit
Valves and Intake Couplers)
ETL TESTING LABORATORIES (ETL)
Page 145
ETL DLP (updated continuously) Directory of ETL Listed
Products
EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN/CENELEC)
CENELEC EN 60529 (1991; A1 2000; A2 2013) Degrees of Protection
Provided By Enclosures (IP Code)
EN 60309-1 (1999; A1 2007; A2 2012) Plugs, Socket-Outlets and
Couplers for Industrial Purposes Part 1: General
Requirements
EN 60309-2 (1999; A1 2004; A11 2007; A2 2012) Plugs,
Socket-Outlets and Couplers for Industrial Purposes
Part 2: Dimensional Interchangeability Requirements
for Pin and Contact-Tube Accessories
EXPANSION JOINT MANUFACTURERS ASSOCIATION (EJMA)
EJMA Stds (2011) EJMA Standards
FLUID CONTROLS INSTITUTE (FCI)
FCI 70-2 (2013) Control Valve Seat Leakage
FLUID SEALING ASSOCIATION (FSA)
FSA-0017 (1995e6) Standard for Non-Metallic Expansion Joints
and Flexible Pipe Connectors Technical Handbook
FM GLOBAL (FM)
FM 4435 (2013) Roof Perimeter Flashing
FM 4470 (2010) Single-Ply, Polymer-Modified Bitumen Sheet,
Built-up Roof (BUR), and Liquid Applied Roof
Assemblies for Use in Class 1 and Noncombustible
Roof Deck Construction
FM 4471 (2010) Class I Panel Roofs
FM 4991 (2013) Approval of Firestop Contractors
FM APP GUIDE (updated on-line) Approval Guide
http://www.approvalguide.com/
FM DS 1-28 (2002) Design Wind Loads
FM DS 12-17 (2001) Watertube Boilers
FM P9513 (2002) Specialist Data Book Set for Roofing
Contractors; contains 1-22 (2001), 1-28 (2002),
1-29 (2002), 1-28R/1-29R (1998), 1-30 (2000), 1-31
(2000), 1-32 (2000), 1-33 (2000), 1-34 (2001), 1-49
(2000), 1-52 (2000), 1-54 (2001)
FOREST STEWARDSHIP COUNCIL (FSC)
Page 146
FSC STD 01 001 (2000) Principles and Criteria for Forest
Stewardship
FORESTRY SUPPLIERS INC. (FSUP)
FSUP 77341 (1999) Munsell (R) Soil Color Charts
FOUNDATION FOR CROSS-CONNECTION CONTROL AND HYDRAULIC RESEARCH
(FCCCHR)
FCCCHR List (continuously updated) List of Approved Backflow
Prevention Assemblies
FCCCHR Manual (10th Edition) Manual of Cross-Connection Control
GEOLOGICAL SOCIETY OF AMERICA (GeoSA)
GSA RCC00100R (2009) Geological Rock Color Chart (Munsell)
GEOSYNTHETIC INSTITUTE (GSI)
GSI GRI GG4a (2012) Determination of the Long-Term Design
Strength of Stiff Geogrids
GSI GRI GG4b (2012) Determination of the Long-Term Design
Strength of Flexible Geogrids
GSI GRI GG6 (1996) Grip Types for Use in Wide Width Testing of
Geotextiles and Geogrids
GSI GRI GM7 (1995) Accelerated Curing of Geomembrane Test Strip
Seams Made by Chemical Fusion Methods
GSI GRI GM9 (1995) Cold Weather Seaming of Geomembranes
GLASS ASSOCIATION OF NORTH AMERICA (GANA)
GANA Glazing Manual (2004) Glazing Manual
GANA Laminate Manual (2009) Laminated Glazing Reference Manual
GANA Sealant Manual (2008) Sealant Manual
GANA Standards Manual (2001) Tempering Division’s Engineering Standards
Manual
GREEN BUILDING INITIATIVE (GBI)
GBI/ANSI 01 (2010 Green Building Assessment Protocol for
Commercial Buildings
Green Globes (2004) Green Globes(tm) US Green Building Rating
System
GREEN SEAL (GS)
Page 147
GS-12 (1997) Occupancy Sensors
GS-36 (2011) Commercial Adhesives
GS-37 (2012) Cleaning Products for Industrial and
Institutional Use
GYPSUM ASSOCIATION (GA)
GA 214 (2010) Recommended Levels of Gypsum Board Finish
GA 216 (2010) Application and Finishing of Gypsum Panel
Products
GA 224 (2008) Installation of Predecorated Gypsum Board
GA 253 (2012) Application of Gypsum Sheathing
GA 600 (2009) Fire Resistance Design Manual
H.P. WHITE LABORATORY (HPW)
HPW TP-0500.03 (2003) Transparent Materials for use in Forced
Entry or Containment Barriers
HARDWOOD PLYWOOD AND VENEER ASSOCIATION (HPVA)
HPVA EF (2012) American National Standard for Engineered
Wood Flooring
HPVA HP-1 (2009) American National Standard for Hardwood and
Decorative Plywood
HEAT EXCHANGE INSTITUTE (HEI)
HEI 2622 (2009) Standards for Closed Feedwater Heaters; 8th
Edition
HEI 2623 (2004) Standards for Power Plant Heat Exchangers
HYDRAULIC INSTITUTE (HI)
HI 1.1-1.2 (2008) Rotodynamic (Centrifugal) Pump for
Nomenclature and Definitions
HI 1.3 (2009) Rotodynamic (Centrifugal) Pump Applications
HI 2.3 (2008) Rotodynamic (Vertical) Applications
HI 2.4 (2008) Rotodynamic (Vertical) Operations
HI 2.6 (2000) Vertical Pump Tests
HI 3.1-3.5 (2008) Rotary Pumps
HI 7.1-7.5 (2006) Controlled Volume Metering Pumps
Page 148
HI 9.1-9.5 (2000) Pumps – General Guidelines for Types,
Applications, Definitions, Sound Measurements and
Documentation
HI 9.6.4 (2009) Rotodynamic Pumps for Vibration Analysis and
Allowable Values
HI M100 (2009) HI Pump Standards Set
HYDRONICS INSTITUTE DIVISION OF GAMA (HYI)
HI-004 (1995) Radiant Floor Heating
HYI-005 (2008) I=B=R Ratings for Boilers, Baseboard
Radiation and Finned Tube (Commercial)
ICC EVALUATION SERVICE, INC. (ICC-ES)
ICC ES AC125 (2007; R 2009; R 2010; R 2012) Acceptance Criteria
for Concrete and Reinforced and Unreinforced
Masonry Strengthening Using Fiber-Reinforced
Polymer (FRP) Composite Systems
ICC ES AC178 (2003; R 2008) Acceptance Criteria for Inspection
and Verification of Concrete and Reinforced and
Unreinforced Masonry Strengthening Using
Fiber-Reinforced Polymer (FRP) Composite Systems
ICC-ES AC04 (2012) Acceptance Criteria for Sandwich Panels
ICC-ES AC23 (2004; R 2008; R 2011) Acceptance Criteria for
Spray-Applied and Intumescent Mastic Coating
Fire-Protection Materials
ICC-ES AC300 (2010) Acceptance Criteria for Access Floors
ICC-ES AC48 (2012) Acceptance Criteria for Roof Underlayment
for Use in Severe Climate Areas
ILLUMINATING ENGINEERING SOCIETY OF NORTH AMERICA (IES)
IES HB-10 (2011) IES Lighting Handbook
IES LM-48 (2001) Guide for Testing the Calibration of
Locking-Type Photoelectric Control Devices Used in
Outdoor Applications
IES LM-79 (2008) Electrical and Photometric Measurements of
Solid-State Lighting Products
IES LM-80 (2008) Measuring Lumen Maintenance of LED Light
Sources
IES RP-16 (2010; Addendum A 2008; Addenda B & C 2009)
Nomenclature and Definitions for Illuminating
Engineering
Page 149
IES RP-8 (2000; Errata 2004; R 2005; Errata 2007) Roadway
Lighting
IES TM-15 (2011) Luminaire Classification System for Outdoor
Luminaires
IES TM-21 (2011) Projecting Long Term Lumen Maintenance of
LED Light Sources
INDUSTRIAL FASTENERS INSTITUTE (IFI)
IFI 100/107 (2002) Prevailing Torque-Type Steel Hex and Hex
Flange Nuts Regular and Light Hex Series
INSTITUTE OF CLEAN AIR COMPANIES (ICAC)
ICAC EP-1 (2000) Terminology for Electrostatic Precipitators
ICAC EP-10W (2008) Bid Specification Information Requirements
and Bid Evaluation Form for Electrostatic
Precipitators
ICAC EP-6 (1968) Pilot Electrostatic Precipitators
ICAC EP-7 (2004) Electrostatic Precipitator Gas Flow Model
Studies
ICAC EP-8 (1993) Structural Design Criteria for Electrostatic
Precipitator Casings
ICAC F-2 (1972) Fundamentals of Fabric Collectors and
Glossary of Terms
ICAC F-3 (2002) Operation and Maintenance of Fabric Filters
ICAC F-5 (1991) Types of Fabric Filters
ICAC FGD-1 (1982) Flue Gas Desulfurization Terminology
ICAC G-1 (1968; R 1972) Gaseous Emissions Equipment: Product
Definitions and Illustrations
ICAC M-2 (1969) Cyclonic Mechanical Dust Collector Criteria
ICAC M-4 (1973) Information Required for the Preparation of
Bidding Specifications for Large Diameter Cyclones
and Tubular Centrifugal Collectors
ICAC M-5 (1975) Standardized Method of Particle Size
Determination and Collection Efficiency
ICAC M-6 (1981) Simplified Method of Efficiency Calculations
from Fractional Efficiency Curves
ICAC WS-1 (1975) Wet Scrubber Terminology
ICAC WS-3 (1976; R 1980) Basic Types of Wet Scrubbers
Page 150
ICAC WS-4 (1975) Wet Scrubber System-Major Auxiliaries
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE 1 (2000; R 2005) General Principles for Temperature
Limits in the Rating of Electric Equipment and for
the Evaluation of Electrical Insulation
IEEE 100 (2000; Archived) The Authoritative Dictionary of
IEEE Standards Terms
IEEE 1100 (2005) Emerald Book IEEE Recommended Practice for
Powering and Grounding Electronic Equipment
IEEE 112 (2004) Standard Test Procedure for Polyphase
Induction Motors and Generators
IEEE 114 (2001) Test Procedure for Single-Phase Induction
Motors
IEEE 115 (2009) Guide for Test Procedures for Synchronous
Machines: Part I Acceptance and Performance
Testing; Part II Test Procedures and Parameter
Determination for Dynamic Analysis
IEEE 1159 (2009) Recommended Practice on Monitoring Electric
Power Quality
IEEE 120 (1989; R 2007) Master Test Guide for Electrical
Measurements in Power Circuits
IEEE 142 (2007) Recommended Practice for Grounding of
Industrial and Commercial Power Systems – IEEE
Green Book
IEEE 18 (2012) Standard for Shunt Power Capacitors
IEEE 1815 (2012) Electric Power Systems
Communications-Distributed Network Protocol (DNP3)
IEEE 242 (2001; Errata 2003) Recommended Practice for
Protection and Coordination of Industrial and
Commercial Power Systems – Buff Book
IEEE 299 (2006) Standard Method for Measuring the
Effectiveness of Electromagnetic Shielding
Enclosures
IEEE 32 (1972; R 1997) Standard Requirements, Terminology,
and Test Procedures for Neutral Grounding Devices
IEEE 383 (2003; R 2008) Standard for Qualifying Class 1E
Electric Cables and, Field Splices for Nuclear
Power Generating Stations 2004
IEEE 386 (2006; INT 1 2011) Standard for Separable Insulated
Connector Systems for Power Distribution Systems
Page 151
Above 600V
IEEE 399 (1997) Brown Book IEEE Recommended Practice for
Power Systems Analysis
IEEE 4 (2013) Standard Techniques for High Voltage Testing
IEEE 400.2 (2013) Guide for Field Testing of Shielded Power
Cable Systems Using Very Low Frequency (VLF)
IEEE 404 (2012) Standard for Extruded and Laminated
Dielectric Shielded Cable Joints Rated 2500 V to
500,000 V
IEEE 43 (2000; R 2006) Recommended Practice for Testing
Insulation Resistance of Rotating Machinery
IEEE 450 (2010) Recommended Practice for Maintenance,
Testing, and Replacement of Vented Lead-Acid
Batteries for Stationary Applications
IEEE 48 (2009) Standard for Test Procedures and
Requirements for Alternating-Current Cable
Terminations Used on Shielded Cables Having
Laminated Insulation Rated 2.5 kV through 765 kV or
Extruded Insulation Rated 2.5 kV through 500 kV
IEEE 484 (2002; R 2008) Recommended Practice for
Installation Design and Implementation of Vented
Lead-Acid Batteries for Stationary Applications
IEEE 485 (2010) Recommended Practice for Sizing Lead-Acid
Batteries for Stationary Applications
IEEE 515 (2011) Standard for the Testing, Design,
Installation, and Maintenance of Electrical
Resistance Heat Tracing for Industrial Applications
IEEE 519 (1992; R 1993; Errata 2004) Recommended Practices
and Requirements for Harmonic Control in Electrical
Power Systems
IEEE 525 (2007) Guide for the Design and Installation of
Cable Systems in Substations
IEEE 602 (2007) Recommended Practice for Electric Systems in
Health Care Facilities – White Book
IEEE 62 (1995; R 2005) Guide for Diagnostic Field Testing
of Electric Power Apparatus-Part 1: Oil Filled
Power Transformers, Regulators, and Reactors
IEEE 754 (2008) Floating-Point Arithmetic – IEEE Computer
Society
IEEE 80 (2000; INT 1 2002; Errata 2007) Guide for Safety in
AC Substation Grounding
Page 152
IEEE 802.11 (2012; AA 2012; AE 2012; AD 2012; AC 2013; AF 2013)
Information technology-Telecommunications and
Information Exchange Between Systems Local and
Metropolitan Area Networks-Specific Requirements
Part 11: Wireless LAN Medium Access Control (MAC)
and Physical Layer (PHY) Specifications
IEEE 802.3 (2012; Errata 2013; ADD BK 2013) Standard
Information Technology–Telecommunications and
Information Exchange Between Systems–Specific
Requirements Part 3: CSMA/CD Access Method and
Physical Layer Specifications
IEEE 81 (2012) Guide for Measuring Earth Resistivity,
Ground Impedance, and Earth Surface Potentials of a
Ground System
IEEE 85 (1973; R 1986) Test Procedure for Airborne Sound
Measurements on Rotating Electric Machinery
IEEE C12.16 (1991) Solid-State Electricity Meters
IEEE C135.1 (1999) Standard for Zinc-Coated Steel Bolts and
Nuts for Overhead Line Construction
IEEE C135.2 (1999) Threaded Zinc-Coated Ferrous Strand-Eye
Anchor Rods and Nuts for Overhead Line Construction
IEEE C135.22 (1988) Standard for Zinc-Coated Ferrous Pole-Top
Insulator Pins with Lead Threads for Overhead Line
Construction
IEEE C135.30 (1988) Standard for Zinc-Coated Ferrous Ground Rods
for Overhead or Underground Line Construction
IEEE C2 (2012; Errata 2012; INT 1-4 2012; INT 5-7 2013)
National Electrical Safety Code
IEEE C37.04 (1999; R 2006; AMD 1 2003; R 2006; ERTA 2005; R
2006; AMD 2 2008; CORR 2009; INT 2010) Standard for
Rating Structure for AC High-Voltage Circuit
Breakers
IEEE C37.06 (2009) Standard for AC High-Voltage Circuit
Breakers Rated on a Symmetrical Current Basis -
Preferred Ratings and Related Required Capabilities
for Voltage Above 1000 V
IEEE C37.081 (1981; Supp 1997; R 2007) Guide for Synthetic Fault
Testing of AC High-Voltage Circuit Breakers Rated
on a Symmetrical Current Basis
IEEE C37.09 (1999; AMD 1 2005; Corr 1 2007; R 2007; Errata
2007; Amendment B 2011) Standard Test Procedure for
AC High-Voltage Circuit Breakers Rated on a
Symmetrical Current Basis
Page 153
IEEE C37.1 (2007) Standard for Supervisory Control, Data
Acquisition (SCADA) and Automatic Systems
IEEE C37.121 (2012) American National Standard for
Switchgear-Unit Substations – Requirements
IEEE C37.13 (2008; INT 1 2009; AMD 1 2012) Standard for
Low-Voltage AC Power Circuit Breakers Used in
Enclosures
IEEE C37.16 (2009) Standard for Preferred Ratings, Related
Requirements, and Application Recommendations for
Low-Voltage AC (635 V and below) and DC 3200 V and
below) Power Circuit Breakers
IEEE C37.17 (2012) Standard for Trip Devices for AC and
General-Purpose DC Low-Voltage Power Circuit
Breakers
IEEE C37.2 (2008) Standard for Electrical Power System Device
Function Numbers, Acronyms and Contact Designations
IEEE C37.20.1 (2002; INT 1 2005; AMD A 2005; AMD B 2006; R 2007)
Standard for Metal-Enclosed Low-Voltage Power
Circuit-Breaker Switchgear
IEEE C37.20.2 (1999; Corr 2000; R 2005) Standard for Metal-Clad
Switchgear
IEEE C37.20.3 (2013) Standard for Metal-Enclosed Interrupter
Switchgear
IEEE C37.23 (2003; R 2008) Standard for Metal-Enclosed Bus
IEEE C37.30 (1997; INT 1 2011) Standard Requirements for
High-Voltage Switches
IEEE C37.32 (2002) Standard for High-Voltage Switches, Bus
Supports, and Accessories – Schedules of Preferred
Ratings, Construction Guidelines and Specifications
IEEE C37.34 (1994) Standard Test Code for High-Voltage Air
Switches
IEEE C37.40 (2003; Errata 2003; R 2009) Service Conditions &
Definitions for High-Voltage Fuses, Distribution
Enclosed Single-Pole Air Switches, Fuse
Disconnecting Switches, & Accessories
IEEE C37.41 (2008; Errata 2009) Standard Design Tests for
High-Voltage (>1000 V) Fuses, Fuse and
Disconnecting Cutouts, Distribution Enclosed
Single-Pole Air Switches, Fuse Disconnecting
Switches, and Accessories Used with These Devices
IEEE C37.42 (2009) Standard Specifications for High-Voltage (>
1000 V) Expulsion-Type Distribution-Class Fuses,
Page 154
Fuse and Disconnecting Cutouts, Fuse Disconnecting
Switches, and Fuse Links, and Accessories Used with
These Devices
IEEE C37.46 (2010) Standard for High Voltage Expulsion and
Current-Limiting Type Power Class Fuses and Fuse
Disconnecting Switches
IEEE C37.47 (2011) Standard for High Voltage Current-Limiting
Type Distribution Class Fuses and Fuse
Disconnecting Switches
IEEE C37.60 (2012) Standard Requirements for Overhead, Pad
Mounted, Dry Vault and Submersible Automatic
Circuit Reclosers and Fault Interrupters for
Alternating Current Systems Up to 38 kV
IEEE C37.63 (2013) Standard Requirements for Overhead,
Pad-Mounted, Dry-Vault, and Submersible Automatic
Line Sectionalizers for AC Systems
IEEE C37.71 (2001) Standard Three-Phase, Manually Operated
Subsurface or Vault Load-Interrupting Switches for
Alternating-Current Systems
IEEE C37.74 (2003; Int 1 2004) Standard Requirements for
Subsurface, Vault, and Pad-Mounted Load-Interrupter
Switchgear and Fused Load-Interrupter Switchgear
for Alternating Current Systems Up to 38 kV
IEEE C37.90 (2005) Standard for Relays and Relay Systems
Associated With Electric Power Apparatus
IEEE C37.90.1 (2012) Standard for Surge Withstand Capability
(SWC) Tests for Relays and Relay Systems Associated
with Electric Power Apparatus
IEEE C37.96 (2012) Guide for AC Motor Protection
IEEE C50.12 (2005; R 2010) Standard for Salient Pole 50 HZ and
60 Hz Synchronous Generators and Generation/Motors
for Hydraulic Turbine Applications Rated 5 MVA and
above
IEEE C57.110 (2008) Recommended Practice for Establishing
Liquid-Filled and Dry-Type Power and Distribution
Transformer Capability When Supplying Nonsinusoidal
Load Currents
IEEE C57.12.00 (2010) Standard General Requirements for
Liquid-Immersed Distribution, Power, and Regulating
Transformers
IEEE C57.12.01 (2005) General Requirements for Dry-Type
Distribution and Power Transformers Including Those
with Solid-Cast and/or Resin-Encapsulated Windings
Page 155
IEEE C57.12.10 WARNING: Text in tags exceeds the maximum length
of 300 characters
IEEE C57.12.20 (2011) Standard for Overhead Type Distribution
Transformers, 500 KVA and Smaller: High Voltage 34
500 Volts and Below: Low Voltage, 7970/13,800 Y
Volts and Below
IEEE C57.12.25 (1990) Standard for Transformers – Pad-Mounted,
Compartmental-Type, Self-Cooled, Single-Phase
Distribution Transformers With Separable Insulated
High-Voltage Connectors; High Voltage, 34,500 Grdy/
19,920 Volts and Below; Low Voltage, 240/120 Volts;
167 kVa and Smaller Requirements
IEEE C57.12.28 (2005; INT 3 2011) Standard for Pad-Mounted
Equipment – Enclosure Integrity
IEEE C57.12.29 (2005) Standard for Pad-Mounted Equipment -
Enclosure Integrity for Coastal Environments
IEEE C57.12.34 (2009) Standard for Requirements for Pad-Mounted,
Compartmental-Type, Self-Cooled, Three-Phase
Distribution Transformers, 5 MVA and Smaller; High
Voltage, 34.5 kV Nominal System Voltage and Below;
Low Voltage, 15 kV Nominal System Voltage and Below
IEEE C57.12.50 (1981; R 1998) Ventilated Dry-Type Distribution
Transformers, 1 to 500 kVA, Single-Phase, and 15 to
500 kVA, Three-Phase, with High-Volt 601 to 34,500
Volts
IEEE C57.12.51 (2008) Standard for Ventilated Dry-Type Power
Transformers, 501 kVA and Larger, Three-Phase, with
High-Voltage 601 to 34,500 Volts, Low-voltage
208Y/120 to 4160 Volts – General Requirement
IEEE C57.12.70 (2011) Standard Terminal Markings and Connections
for Distribution and Power Transformers
IEEE C57.12.80 (2010) Standard Terminology for Power and
Distribution Transformers
IEEE C57.12.90 (2010) Standard Test Code for Liquid-Immersed
Distribution, Power, and Regulating Transformers
IEEE C57.12.91 (2011) Standard Test Code for Dry-Type Distribution
and Power Transformers
IEEE C57.124 (1991; R 2002) Recommended Practice for the
Detection of Partial Discharge and the Measurement
of Apparent Charge in Dry-Type Transformers
IEEE C57.13 (2008; INT 2009) Standard Requirements for
Instrument Transformers
IEEE C57.13.1 (2006) Guide for Field Testing of Relaying Current
Page 156
Transformers
IEEE C57.15 (2009) Standard Requirements, Terminology, and Test
Code for Step-Voltage Regulators
IEEE C57.19.00 (2009; INT 1 2009; Errata 2010) Standard General
Requirements and Test Procedures for Outdoor Power
Apparatus Bushings
IEEE C57.19.01 (2000; R 2005; INT 1 2010) Standard Performance
Characteristics and Dimensions for Outdoor
Apparatus Bushings
IEEE C57.93 (2007) Guide for Installation and Maintenance of
Liquid-Immersed Power Transformers
IEEE C57.96 (2013) Guide for Loading Dry-Type Distribution and
Power Transformers
IEEE C57.98 (2011) Guide for Transformer Impulse Tests
IEEE C62.11 (2012) Standard for Metal-Oxide Surge Arresters for
Alternating Current Power Circuits (>1kV)
IEEE C62.33 (1982; R 2000) Standard for Test Specifications for
Varistor Surge-Protective Devices
IEEE C62.41 (1991; R 1995) Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits
IEEE C62.41.1 (2002; R 2008) Guide on the Surges Environment in
Low-Voltage (1000 V and Less) AC Power Circuits
IEEE C62.41.2 (2002) Recommended Practice on Characterization of
Surges in Low-Voltage (1000 V and Less) AC Power
Circuits
IEEE C62.45 (2002; R 2008) Recommended Practice on Surge
Testing for Equipment Connected to Low-Voltage
(1000v and less)AC Power Circuits
IEEE C63.2 (2009) Standard for Electromagnetic Noise and Field
Strength Instrumentation, 10 Hz to 40 GHz -
Specifications
IEEE C63.4 (2009) American National Standard for Methods of
Measurement of Radio-Noise Emissions from
Low-Voltage Electrical and Electronic Equipment in
the Range of 9 kHz to 40 GHz
IEEE Stds Dictionary (2009) IEEE Standards Dictionary: Glossary of Terms
& Definitions
INSTITUTE OF ENVIRONMENTAL SCIENCES AND TECHNOLOGY (IEST)
IEST RP-CC-001 (2009) HEPA and ULPA Filters
Page 157
IEST RP-CC-008 (2007; Rev 2) Gas-Phase Adsorber Cells
IEST-STD-CC1246 (2013; Rev E) Product Cleanliness Levels and
Contamination Control Program
INSTITUTE OF INSPECTION, CLEANING, AND RESTORATION CERTIFICATION
(IICRC)
IICRC S100 (2002) Standard Reference Guide for Professional
Carpet Cleaning
IICRC S500 (2006) Standard and Reference Guide for
Professional Water Damage Restoration
INSTITUTE OF TRANSPORTATION ENGINEERS (ITE)
ITE ATC (2006; v5.2b) Advanced Transportation Controller
(ATC) Standard
INSTRUCTIONS AND STANDARDS FOR NAVBASE GUANTANAMO BAY CUBA
(COMNAVBASEGTMOINST)
11300.3 Base Energy Conservation Regulations
1710.10 Outdoor Recreational and Wildlife Instruction
4400.2A Consolidated Hazardous Material Reutilization and
Inventory Management Program
5090.1 Hazardous Waste Management Plan
5090.4 Standard Operating Procedures for Landfill
5090.7 Pollution Control Procedures for Oil and Hazardous
Substances
5090.8 Asbestos Program Management
5100.13 Hazardous Material/Excess Hazardous Material
Control and Safety Program
FGS (1994) Final Governing Standards for Environmental
Protection by U.S. Forces in Cuba
INSULATED CABLE ENGINEERS ASSOCIATION (ICEA)
ICEA S-83-596 (2011) Indoor Optical Fiber Cables
ICEA S-87-640 (2011) Optical Fiber Outside Plant Communications
Cable; 4th Edition
ICEA S-90-661 (2012) Category 3, 5, & 5e Individually Unshielded
Twisted Pair Indoor Cables for Use in General
Purpose and LAN Communications Wiring Systems
Technical Requirements
ICEA S-94-649 (2013) Standard for Concentric Neutral Cables Rated
Page 158
5 Through 46 KV
ICEA S-98-688 (2012) Broadband Twisted Pair Telecommunication
Cable, Aircore, Polyolefin Insulated, Copper
Conductors Technical Requirements
ICEA S-99-689 (2012) Broadband Twisted Pair Telecommunication
Cable Filled, Polyolefin Insulated, Copper
Conductors Technical Requirements
INSULATING GLASS MANUFACTURERS ALLIANCE (IGMA)
IGMA TB-3001 (2001) Guidelines for Sloped Glazing
IGMA TM-3000 (1990; R 2004) North American Glazing Guidelines
for Sealed Insulating Glass Units for Commercial &
Residential Use
IGMA TR-1200 (1983; R 2007) Guidelines for Commercial Insulating
Glass Dimensional Tolerances
INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA)
IATA DGR (2013) Dangerous Goods Regulations
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS
(IAPMO)
IAPMO PS 117 (2005b) Press Type Or Plain End Rub Gasketed W/
Nail CU & CU Alloy Fittings 4 Install On CU Tubing
IAPMO UPC (2003) Uniform Plumbing Code
IAPMO Z124.1.2 (2005) Plastic Bathtub and Shower Units
IAPMO Z124.3 (2005) Plastic Lavatories
IAPMO Z124.5 (2013) Plastic Toilet (Water Closet) Seats
IAPMO Z124.6 (2007) Plastic Sinks
IAPMO Z124.8 (1990) Plastic Bathtub Liners
INTERNATIONAL CODE COUNCIL (ICC)
ICC A117.1 (2009) Accessible and Usable Buildings and
Facilities
ICC IBC (2012) International Building Code
ICC IFC (2012) International Fire Code
ICC IFGC (2012) International Fuel Gas Code
ICC IMC (2012) International Mechanical Code
Page 159
ICC IPC (2012) International Plumbing Code
ICC PCBF (2012) INTERNATIONAL CODE COUNCIL PERFORMANCE CODE®
For buildings and facilities
ICC UBC (1997; Erratas Vol 1, 2 & 3 01/2001; Vol 1 & 2
03/2001; Vol 2 10/2001) Uniform Building Code
ICC UMC (1997; Errata 2 & 3 1997) Uniform Mechanical Code
ICC/ANSI A117.1 (2009) Accessible and Usable Buildings and
Facilities
INTERNATIONAL CONCRETE REPAIR INSTITUTE (ICRI)
ICRI 03732 (1997) Selecting and Specifying Concrete Surface
Preparation for Sealers, Coatings, and Polymer
Overlays
INTERNATIONAL ELECTRICAL TESTING ASSOCIATION (NETA)
NETA ATS (2013) Standard for Acceptance Testing
Specifications for Electrical Power Equipment and
Systems
NETA MAINT (2011) Standard for Maintenance Testing
Specifications for Electric Power Distribution
Equipment and Systems
INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC)
IEC 60034-1 (2010) Rotating Electrical Machines – Part 1:
Rating and Performance
IEC 60034-14 (2007) Rotating Electrical Machines – Part 14:
Mechanical Vibration of Certain Machines with Shaft
Heights 56 mm and Higher – Measurement, Evaluation
and Limits of Vibration Severity
IEC 60034-2A (1974; ED 1.0) Rotating Electrical Machines Part
2: Methods for Determining Losses and Efficiency
of Rotating Electrical Machinery from Tests
(Excluding Machines for Traction Vehicles)
Measurement of Losses by the Calorimetric Method
IEC 60034-5 (2006) Rotating Electrical Machines – Part 5:
Degrees of Protection Provided by the Integral
Design of Rotating Electrical Machines (IP Code) –
Classification
IEC 60034-6 (1991) Rotating Electrical Machines Part 6: Methods
of Cooling (IC Code)
IEC 60068-2-27 (2008; ED 4.0) Environmental Testing – Part 2-27:
Tests – Test Ea and Guidance: Shock
IEC 60068-2-30 (2005; ED 3.0) Environmental Testing – Part 2-30:
Page 160
Tests – Test Db: Damp Heat, Cyclic (12 H + 12 H
Cycle)
IEC 60204-1 (2009) Safety of Machinery – Electrical Equipment
of Machines – Part 1: General Requirements
IEC 60255-21-3 (1993; ED 1.0) Electrical Relays – Part 21:
Vibration, Shock, Bump And Seismic Tests On
Measuring Relays And Protection Equipment – Section
3: Seismic Tests
IEC 60265-1 (1998; Corrigendum 2000) High Voltage Switches -
Part 1: Switches for Rated Voltages Above 1 kV and
Less Than 52 kV
IEC 60268-16 (2003; ED 4.0) Sound System Equipment – Part 16:
Objective Rating Of Speech Intelligibility By
Speech Transmission Index
IEC 60269-1 (2009) Low-Voltage Fuses – Part 1: General
Requirements
IEC 60269-2 (2013) Low-Voltage Fuses – Part 2: Supplementary
Requirements for Fuses for Use by Authorized
Persons (Fuses Mainly for Industrial Application) –
Examples of Standardized Systems of Fuses A to K
IEC 60309-3 Pin and Sleeve Devices
IEC 60364-1 (2005) Low-voltage Electrical Installations in
Buildings – Part 1: Fundamental Principles,
Assessment of General Characteristics, Definitions
IEC 60364-5 (2009) Low-Voltage Electrical Installations – Part
5-52: Selection and Erection of Electrical
Equipment – Wiring Systems
IEC 60687 (1992) Alternating Current Static Watt-Hour Meters
for Active Energy (Classes 0,2 S and 0,5 S)
IEC 60947-1 (2011) Low-Voltage Switchgear and Controlgear –
Part 1: General Rules
IEC 60947-2 (2013) Low-Voltage Switchgear and Controlgear –
Part 2: Circuit-Breakers
IEC 60947-3 (2012; AMD 1; CORR 1) Low-Voltage Switchgear and
Controlgear – Part 3: Switches, Disconnectors,
Switch-Disconnectors and Fuse-Combination Units
IEC 60947-4-1 (2012; ED 3.1) Low-voltage Switchgear and
Controlgear, Part 4-1: Contactors and Motor
Starters – Electromechanical Contactor and Motor
Starters
IEC 61000-4-5 (2005; ED 2.0; CORR 2009) Electromagnetic
Compatibility (EMC) – Part 4-5: Testing and
Page 161
Measurement Techniques – Surge Immunity Test
IEC 61099 (2010; ED 2.0) Insulating Liquids – Specifications
for Unused Synthetic Organic Esters for Electrical
Purposes
IEC 61131-3 (2013) Programmable Controllers – Part 3:
Programming Languages
IEC 62053-22 (2003; ED 1.0) Electricity Metering Equipment
(a.c.) – Particular Requirements – Part 22: Static
Meters for Active Energy (Classes 0,2 S and 0,5 S)
IEC 62271-111 (2012; ED 2.0) High Voltage Switchgear And
Controlgear – Part 111: Automatic Circuit Reclosers
and Fault Interrupters for Alternating Current
Systems up to 38 kV
INTERNATIONAL GROUND SOURCE HEAT PUMP ASSOCIATION (IGSHPA)
IGSHPA 21010 (1991) Grouting Procedures for Ground-Source Heat
Pump Systems
IGSHPA 21015 (2000) Grouting for Vertical GHP Systems
IGSHPA 21020 (1988) Closed-Loop/Ground-Source Heat Pump
System/Installation Guide
IGSHPA 21030 (2005) Design and Installation Standards
IGSHPA 21060 (1989) Soil and Rock Classification Field Manual
INTERNATIONAL INSTITUTE OF AMMONIA REFRIGERATION (IIAR)
IIAR 2 (2008; ADD A 2010) American National Standard for
Equipment, Design, and Installation of Ammonia
Mechanical Refrigerating Systems
INTERNATIONAL MUNICIPAL SIGNAL ASSOCIATION (IMSA)
IMSA 32 (1997) Copper-Covered Steel Messenger Strand, 30
Percent or 40 Percent Conductivity
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ANSI ISO/IEC 7816 (R 2009) Identification Cards – Integrated Circuit
Cards
ISO 10763 (1994) Hydraulic Fluid Power – Plain-end, Seamless
and Welded Precision Steel Tubes – Dimensions and
Nominal Working Pressures
ISO 11143 (2008) Dentistry – Amalgam Separators
ISO 11171 (2010) Hydraulic Fluid Power – Calibration of
Automatic Particle Counters for Liquids
Page 162
ISO 11727 (1999) Pneumatic Fluid Power – Identification of
Ports and Control Mechanisms of Control Valves and
Other Components
ISO 1219-1 (2012) Fluid Power Systems and Components Graphic
Symbols and Circuit Diagrams – Part 1: Graphic
Symbols for Conventional Use and Data-Processing
Applications
ISO 1219-2 (2012) Fluid Power Systems and Components Graphic
Symbols and Circuit Diagrams – Part 2: Circuit
Diagrams
ISO 13256-1 (1998) Water-Source Heat Pumps – Testing and Rating
for Performance – Part 1: Water-to-Air and
Brine-to-Air Heat Pumps
ISO 13256-2 (1998) Water-Source Heat Pumps – Testing and Rating
for Performance – Part 2: Water-to-Water and
Brine-to-Water Heat Pumps
ISO 14040 (2006) Environmental Management – Life Cycle
Assessment – Principles and Framework
ISO 14644-1 (1999) Cleanrooms and Associated Controlled
Environments Part 1: Classification of Air
Cleanliness
ISO 14644-2 (2000) Cleanrooms and Associated Controlled
Environments Part 2: Specifications for Testing and
Monitoring to Prove Continued Compliance with ISO
14644-1
ISO 16889 (2008) Hydraulic Fluid Power – Multi-Pass Method
for Evaluating Filtration Performance of a Filter
Element
ISO 17357-1 (2014) Ships and Marine Technology – Floating
Pneumatic Rubber Fenders – Part 1: High Pressure
ISO 1940-1 (2003; Cor 2005) Mechanical Vibration – Balance
Quality Requirements for Rotors in a Constant
(Rigid) State – Part 1: Specification and
Verification of Balance
ISO 2151 (2004) Acoustics – Noise Test Code for Compressors
and Vacuum Pumps – Engineering Method (Grade 2)
ISO 228-1 (2000) Pipe Threads Where Pressure-Tight Joints Are
Not Made on The Threads – Part 1: Dimensions,
Tolerances and Designation
ISO 2551 (1981) Machine-made Textile Floor Coverings -
Determination of Dimensional Changes Due to the
Effects of Varied Water and Heat Conditions
ISO 261 (1998) ISO General Purpose Metric Screw Threads -
Page 163
General Plan
ISO 262 (1998) ISO General Purpose Metric Screw Threads -
Selected Sizes for Screws, Bolts and Nuts
ISO 263 (1973) ISO Inch Screw Threads – General Plan and
Selection for Screws, Bolts and Nuts – Diameter
Range 0.06 to 6 inch
ISO 2758 (2001) Paper – Determination of Bursting Strength
ISO 2858 (1975) End Suction Centrifugal Pump (Rating 16 Bar)
Designation Nominal Duty Point and Dimensions -
International Restrictions
ISO 3046 (1986; Am. 1) Reciprocating Internal Combustion
Engines – Performance
ISO 34-1 (2010) Rubber, Vulcanized rr Thermoplastic –
Determination of Tear Strength — Part 1: Trouser,
Angle and Crescent Test Pieces
ISO 37 (2011) Rubber, Vulcanized or Thermoplastic –
Determination of Tensile Stress-Strain Properties
ISO 3813 (2004) Resilient Floor Coverings – Cork Floor Tiles
ISO 4021 (1992) Hydraulic Fluid Power – Particulate
Contamination Analysis – Extraction of Fluid
Samples from Lines of an Operating System
ISO 4126-1 (2004) Safety Devices for Protection Against
Excessive Pressure – Part 1: Safety Valves
ISO 4406 (1999) Hydraulic Fluid Power – Fluids – Method for
Coding the Level of Contamination by Solid Particles
ISO 4407 (2002) Hydraulic Fluid Power – Fluid Contamination
- Determination of Particulate Contamination by the
Counting Method Using an Optical Microscope
ISO 4413 (2010) Hydraulic Fluid Power — General Rules and
Safety Requirements for Systems and Their Components
ISO 5199 (2002) Technical Specifications for Centrifugal
Pumps, Class II
ISO 5209 (1977) General Purpose Industrial Valves – Marking
ISO 5598 (2008) Fluid Power Systems and Components -
Vocabulary
ISO 5752 (1982) Metal Valves for Use in Flanged Pipe Systems
- Face to Face and Center to Face Dimensions
ISO 6781 (1983) Thermal Insulation – Qualitative Detection
of Thermal Irregularities in Building Envelopes -
Page 164
Infrared Method
ISO 7005-2 (1988) Metallic Flanges Part 2: Cast Iron Flanges
ISO 7240-16 (2007) Fire Detection And Alarm Systems — Part 16:
Sound System Control And Indicating Equipment
ISO 7240-19 (2007) Fire Detection and Alarm Systems — Part 19:
Design, Installation, Commissioning and Service of
Sound Systems for Emergency Purposes
ISO 7810 (2003; Amd 1 2009; Amd 2 2012) Identification Cards
- Physical Characteristics
ISO 7811-1 (2002) Identification Cards – Recording Technique -
Part 1: Embossing
ISO 7811-2 (2001) Identification Cards – Recording Technique
- Part 2: Magnetic Stripe – Low Coercivity
ISO 815-1 (2008) Rubber, Vulcanized or Thermoplastic –
Determination of Compression Set — Part 1: At
Ambient or Elevated Temperatures
ISO 8528 (1993; R 2005) Reciprocating Internal Combustion
Engine Driven Alternating Current Generator Sets
ISO 8601 (2004) Data Elements and Interchange Formats -
Information Interchange – Representation of Dates
and Times
ISO 8802-3 (2000) Information Technology – Telecommunications
and Information Exchange Between Systems – Local
and Metropolitan Area Networks – Specific
Requirements – Part 3: Carrier Sense Multiple
Access with Collision Detection (CSMA/CD)Access
Method and Physical Layer Specifications
ISO 8859-1 (1998) Information Technology – 8-Bit Single-Byte
Coded Graphic Character Sets – Part 1: Latin
Alphabet No. 1
ISO 898-1 (2013) Mechanical Properties of Fasteners Made of
Carbon Steel and Alloy Steel — Part 1: Bolts,
Screws and Studs with Specified Property Classes —
Coarse Thread and Fine Pitch Thread
ISO 9001 (2008; Corr 1 2009) Quality Management Systems-
Requirements
ISO 9461 (1992) Hydraulic Fluid Power – Identification of
Valve Ports, Subplates, Control Devices and
Solenoids
INTERNATIONAL SAFETY EQUIPMENT ASSOCIATION (ISEA)
ANSI/ISEA Z358.1 (2009) American National Standard for Emergency
Page 165
Eyewash and Shower Equipment
ANSI/ISEA Z87.1 (2010) Occupational and Educational Personal Eye
and Face Protection Devices
ANSI/ISEA Z89.1 (2009) American National Standard for Requirements
for Industrial Head Protection
INTERNATIONAL TELECOMMUNICATION UNION (ITU)
ITU V.34 (1998) Data Communication Over the Telephone
Network: A Modem Operating at Data Signaling Rates
of up to 33,600 Bit/S for Use on the General
Switched Telephone Network and on Leased
Point-To-Point 2-Wire Telephone-Type Circuits
ITU V.42 (2002; Corrigendum 1 2003) Data Communications
Over the Telephone Network: Error-Correcting
Procedures for DCEs using
Asynchronous-to-Synchronous Conversion
ITU V.42 bis (1990) Data Communication over the Telephone
Network: Data Compression Procedures for Data
Circuit Terminating Equipment (DCE) Using Error
Correction Procedures
ITU V.92 (2000; Am 1 2001, Am 2 2002; Corr 1 2003) Data
Communication Over the Telephone Network:
Enhancements to Recommendation V.90
INTERNATIONAL WINDOW CLEANING ASSOCIATION (IWCA)
IWCA I-14.1 (2001) Window Cleaning Safety Standard
IPC – ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES (IPC)
IPC D330 (1992) Design Guide Manual
ISA – INTERNATIONAL SOCIETY OF AUTOMATION (ISA)
ANSI/ISA 12.13.01 (2003) Performance Requirements for Combustible Gas
Detectors
ANSI/ISA 5.1 (2009) Instrumentation Symbols and Identification
ISA 18.1 (1979; R2004) Annunciator Sequences and
Specifications
ISA 5.2 (1976; R1992) Binary Logic Diagrams for Process
Operations
ISA 5.3 (1983) Graphic Symbols for Distributed
Control/Shared Display Instrumentation, Logic, and
Computer Systems
ISA 51.1 (1979; R1993) Process Instrumentation Terminology
Page 166
ISA 7.0.01 (1996) Quality Standard for Instrument Air
ISA MC96.1 (1982) Temperature Measurement Thermocouples
ISA RP2.1 (1978) Manometer Tables
ISA RP60.9 (1981) Piping Guide for Control Centers
ITALIAN LAWS AND DECREES (D.M.)
LAW No. 1086 (May 11, 1971) Norms for Works in Reinforced
Concrete and Steel and Application Instructions
Law No. 373 (April 30, 1976) Norms for the containment of
energy consumption for thermal uses in buildings.
Law No. 46 (March 5, 1990) Safety Norms for Technological
Systems
KITCHEN CABINET MANUFACTURERS ASSOCIATION (KCMA)
KCMA A161.1 (2000) Performance & Construction Standards for
Kitchen and Vanity Cabinets
L.H. BAILEY HORTORIUM (LHBH)
LHBH (1976) Hortus Third
LONMARK INTERNATIONAL (LonMark)
LonMark Interoperability (G2u0i0d5e) LonMark Application-Layer Interoperability
Guide and LonMark Layer 1-6 Interoperability Guide;
Version 3.4
LonMark SCPT List (2003) LonMark SCPT Master List; Version 12
LonMark SNVT List (2003) LonMark SNVT Master List; Version 113
LonMark XIF Guide (2001) LonMark External Interface File Reference
Guide; Revision 4.402
MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS
INDUSTRY (MSS)
MSS SP-104 (2012) Wrought Copper Solder Joint Pressure Fittings
MSS SP-110 (2010) Ball Valves Threaded, Socket-Welding, Solder
Joint, Grooved and Flared Ends
MSS SP-125 (2010) Gray Iron and Ductile Iron In-Line,
Spring-Loaded, Center-Guided Check Valves
MSS SP-25 (2013) Standard Marking System for Valves,
Fittings, Flanges and Unions
MSS SP-43 (2013) Wrought Stainless Steel Butt-Welding Fittings
Page 167
MSS SP-44 (2010; Errata 2011) Steel Pipeline Flanges
MSS SP-45 (2003; R 2008) Bypass and Drain Connections
MSS SP-53 (2012) Quality Standard for Steel Castings and
Forgings for Valves, Flanges and Fittings and Other
Piping Components – Magnetic Particle Examination
Method
MSS SP-54 (2013) Quality Standard for Steel Castings for
Valves, Flanges and Fittings and Other Piping
Components, – Radiographic Examination Method
MSS SP-55 (2011) Quality Standard for Steel Castings for
Valves, Flanges and Fittings and Other Piping
Components – Visual Method for Evaluation of
Surface Irregularities
MSS SP-58 (2009) Pipe Hangers and Supports – Materials,
Design and Manufacture, Selection, Application, and
Installation
MSS SP-61 (2013) Pressure Testing of Valves
MSS SP-67 (2011) Butterfly Valves
MSS SP-69 (2003; Notice 2012) Pipe Hangers and Supports -
Selection and Application (ANSI Approved American
National Standard)
MSS SP-70 (2011) Gray Iron Gate Valves, Flanged and Threaded
Ends
MSS SP-71 (2011; Errata 2013) Gray Iron Swing Check Valves,
Flanged and Threaded Ends
MSS SP-72 (2010a) Ball Valves with Flanged or Butt-Welding
Ends for General Service
MSS SP-78 (2011) Cast Iron Plug Valves, Flanged and Threaded
Ends
MSS SP-80 (2013) Bronze Gate, Globe, Angle and Check Valves
MSS SP-83 (2006) Class 3000 Steel Pipe Unions Socket Welding
and Threaded
MSS SP-85 (2011) Gray Iron Globe & Angle Valves Flanged and
Threaded Ends
MSS SP-86 (2009; Errata 2011) Guidelines for Metric Data in
Standards for Valves, Flanges, Fittings and
Actuators
MAPLE FLOORING MANUFACTURERS ASSOCIATION (MFMA)
MFMA AFSFSCL (2003) Athletic Floor Sealer and Finish
Page 168
Specifications and Conformance List #22
MFMA GRHM (2000) Grading Rules for MFMA Northern Hardwood
Maple
MFMA GS (1999) Guide Specifications for Maple Flooring
Systems
MFMA SSCLFMGF (2000) Sanding, Sealing, Court Lining, Finishing
and Resurfacing of Maple Gym Floors
MARBLE INSTITUTE OF AMERICA (MIA)
MIA Design Manual (2003) Dimension Stone Design Manual
MASTER PAINTERS INSTITUTE (MPI)
MPI 1 (Oct 2009) Aluminum Paint
MPI 10 (Oct 2009) Exterior Latex, Flat, MPI Gloss Level 1
MPI 101 (Oct 2009) Epoxy Anti-Corrosive Metal Primer
MPI 107 (Oct 2009) Rust Inhibitive Primer (Water-Based)
MPI 108 (Oct 2009) High Build Epoxy Coating, Low Gloss
MPI 11 (Oct 2009) Exterior Latex, Semi-Gloss, MPI Gloss
Level 5
MPI 113 (Oct 2009) Exterior Pigmented Elastomeric Coating
(Water Based)
MPI 114 (Oct 2009) Interior Latex, Gloss, MPI Gloss Level 6
MPI 116 (Oct 2009) Epoxy Block Filler
MPI 119 (Oct 2009) Exterior Latex, Gloss
MPI 13 (Oct 2009) Exterior Solvent-Based Semi-Transparent
Stain
MPI 134 (Oct 2009) Galvanized Primer (Waterbased)
MPI 138 (Oct 2009) Interior High Performance Latex, MPI
Gloss Level 2
MPI 139 (Oct 2009) Interior High Performance Latex, MPI
Gloss Level 3
MPI 140 (Oct 2009) Interior High Performance Latex, MPI
Gloss Level 4
MPI 141 (Oct 2009) Interior High Performance Latex MPI
Gloss Level 5
Page 169
MPI 144 (Oct 2009) Institutional Low Odor / VOC Interior
Latex, MPI Gloss Level 2
MPI 145 (Oct 2009) Institutional Low Odor / VOC Interior
Latex, MPI Gloss Level 3
MPI 146 (Oct 2009) Institutional Low Odor/VOC Interior
Latex, MPI Gloss Level 4
MPI 147 (Oct 2009) Institutional Low Odor / VOC Interior
Latex, Semi-Gloss, MPI Gloss Level 5
MPI 151 (Oct 2009) Interior W.B. Light Industrial Coating,
MPI Gloss Level 3
MPI 153 (Oct 2009) Interior W.B. Light Industrial Coating,
Semi-Gloss, MPI Gloss Level 5
MPI 154 (Oct 2009) Interior W.B. Light Industrial Coating,
Gloss, MPI Gloss Level 6
MPI 16 (Oct 2009) Exterior Latex-Based Solid Hide Stain
MPI 161 (Oct 2009) Exterior W.B. Light Industrial Coating,
MPI Gloss Level 3
MPI 163 (Oct 2009) Exterior W.B. Light Industrial Coating,
Semi-Gloss, MPI Gloss Level 5
MPI 164 (Oct 2009) Exterior W.B. Light Industrial Coating,
Gloss, MPI Gloss Level 6
MPI 19 (Oct 2009) Inorganic Zinc Rich Primer
MPI 2 (Oct 2009) Aluminum Heat Resistant Enamel (up to
427 C and 800 F
MPI 21 (Oct 2009) Heat Resistant Enamel, Gloss (up to 205
degrees C and 400 degrees F), MPI Gloss Level 6
MPI 212 (Oct 2009) Floor Coating, Thin Film, for Aircraft
Maintenance Facilities
MPI 22 (Oct 2009) Aluminum Paint, High Heat (up to 590
degrees C and 1100 degrees F.
MPI 23 (Oct 2009) Surface Tolerant Metal Primer
MPI 26 (Oct 2009) Cementitious Galvanized Metal Primer
MPI 27 (Oct 2009) Exterior / Interior Alkyd Floor Enamel,
Gloss
MPI 31 (Oct 2009) Polyurethane, Moisture Cured, Clear Gloss
MPI 32 (2005) Standard for Alkyd Traffic Marking Paint
Page 170
MPI 39 (Oct 2009) Interior Latex-Based Wood Primer
MPI 4 (Oct 2009) Interior/Exterior Latex Block Filler
MPI 42 (Oct 2009) Latex Stucco and Masonry Textured Coating
MPI 44 (Oct 2009) Interior Latex, MPI Gloss Level 2
MPI 45 (Oct 2009) Interior Alkyd Primer Sealer
MPI 46 (Oct 2009) Interior Enamel Undercoat
MPI 47 (Oct 2009) Interior Alkyd, Semi-Gloss, MPI Gloss
Level 5
MPI 48 (Oct 2009) Interior Alkyd, Gloss, MPI Gloss Level 6
MPI 49 (Oct 2009) Interior Alkyd, Flat, MPI Gloss Level 1
MPI 5 (Oct 2009) Exterior Alkyd Wood Primer
MPI 50 (Oct 2009) Interior Latex Primer Sealer
MPI 51 (Oct 2009) Interior Alkyd, Eggshell, MPI Gloss
Level 2
MPI 52 (Oct 2009) Interior Latex, MPI Gloss Level 3
MPI 53 (Oct 2009) Interior Latex, Flat, MPI Gloss Level 1
MPI 54 (Oct 2009) Interior Latex, Semi-Gloss, MPI Gloss
Level 5
MPI 56 (Oct 2009) Interior Oil Modified Urethane Clear
Gloss
MPI 57 (Oct 2009) Interior Oil Modified Urethane Clear
Satin
MPI 59 (Oct 2009) Interior/Exterior Floor Enamel, Low Gloss
MPI 6 (Oct 2009) Exterior Latex Wood Primer
MPI 60 (Oct 2009) Interior/Exterior Latex Floor Paint, Low
Gloss
MPI 68 (Oct 2009) Interior/Exterior Latex Floor Enamel,
Gloss
MPI 7 (Oct 2009) Exterior Oil Wood Primer
MPI 71 (Oct 2009) Polyurethane, Moisture Cured, Clear, Flat
MPI 72 (Oct 2009) Polyurethane, Two Component, Pigmented,
Gloss
Page 171
MPI 77 (Oct 2009) Epoxy Gloss
MPI 79 (Oct 2009) Alkyd Anti-Corrosive Metal Primer
MPI 8 (Oct 2009) Exterior Alkyd, Flat, MPI Gloss Level I
MPI 9 (Oct 2009) Exterior Alkyd, Gloss, MPI Gloss Level 6
MPI 90 (Oct 2009) Interior Wood Stain, Semi-Transparent
MPI 94 (Oct 2009) Exterior Alkyd, Semi-Gloss, MPI Gloss
Level 5
MPI 95 (Oct 2009) Quick Drying Primer for Aluminum
MPI ASM (2004) Architectural Painting Specification Manual
MATERIAL HANDLING INDUSTRY OF AMERICA INC (MHIA)
MHI MH27.1 (2009) Specifications for Underhung Cranes and
Monorail Systems
MHI MH27.2 (2009) Specifications for Enclosed Track Underhung
Cranes and Monorail Systems
MHI MH28.1 (1997) Specification: Industrial Steel Grade
Shelving
METAL BUILDING MANUFACTURERS ASSOCIATION (MBMA)
MBMA MBSM (2002) Metal Building Systems Manual
MBMA RSDM (2000) Metal Roofing Systems Design Manual
MIDWEST INSULATION CONTRACTORS ASSOCIATION (MICA)
MICA Insulation Stds (1999) National Commercial & Industrial Insulation
Standards
MIDWEST ROOFING CONTRACTORS ASSOCIATION (MRCA)
CERTA (2003) NRCA/MRCA Certified Roofing Torch Applicator
Program
MODBUS ORGANIZATION, INC (MODBUS)
Modbus (2006) Modbus Application Protocol Specification;
Version 1.1b and Modbus Messaging on TCP/IP
Implementation Guide; Version V1.0b
NACE INTERNATIONAL (NACE)
NACE RP0193 (2001) External Cathodic Protection of On-Grade
Carbon Steel Storage Tank Bottoms
NACE RP0402 (2002) Field-Applied Fusion-Bonded Epoxy (FBE) Pipe
Page 172
Coating Systems for Girth Weld Joints: Application,
Performance, and Quality Control
NACE SP0169 (2013) Control of External Corrosion on Underground
or Submerged Metallic Piping Systems
NACE SP0177 (2007) Mitigation of Alternating Current and
Lightning Effects on Metallic Structures and
Corrosion Control Systems
NACE SP0178 (2007) Design, Fabrication, and Surface Finish
Practices for Tanks and Vessels to be for Immersion
Service
NACE SP0185 (2007) Extruded Polyolefin Resin Coating Systems
with Soft Adhesives for Underground or Submerged
Pipe
NACE SP0188 (1999; R 2006) Discontinuity (Holiday) Testing of
New Protective Coatings on Conductive Substrates
NACE SP0196 (2011) Galvanic Anode Cathodic Protection of
Internal Submerged Surfaces of Steel Water Storage
Tanks
NACE SP0274 (1974; R 2011) High Voltage Electrical Inspection
of Pipeline Coatings
NACE SP0285 (2011) External Corrosion Control of Underground
Storage Tank Systems by Cathodic Protection
NACE SP0288 (2011) Inspection of Linings on Steel and Concrete
Equipment
NACE SP0388 (2001; R 2007) Impressed Current Cathodic
Protection of Internal Submerged Surfaces
NACE SP0572 (2001; R 2007) Design, Installation, Operation and
Maintenance of Impressed Current Deep Anode Beds
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA)
NASA NPG 8621.1 (2004a) NASA Mishap Reporting, Investigating and
Record Keeping Policy
NASA NPG 8715.3 (2004) NASA Safety Manual
NASA-STD 8719.12 (2011; Change 2) Safety Standard for Explosives,
Propellants, and Pyrotechnics
NASA-STD-5008A (2011b) Protective Coating of Carbon Steel,
Stainless Steel, and Aluminum on Launch Structures,
Facilities, and Ground Support Equipment
RCBEA 2.63 (2004) Tank and Storage Tank Un-pressurized
RCBEA GUIDE (2004) NASA Reliability Centered Building and
Page 173
Equipment Acceptance Guide
NATIONAL AIR DUCT CLEANERS ASSOCIATION (NADCA)
ACR (2013) Standard for Assessment, Cleaning, and
Restoration of HVAC Systems
NADCA HVAC Inspection Man(u2a0l05) Procedures for Assessing the Cleanliness of
Commercial HVAC Systems
NATIONAL ASSOCIATION OF ARCHITECTURAL METAL MANUFACTURERS (NAAMM)
NAAMM AMP 500 (2006) Metal Finishes Manual
NAAMM AMP 521 (2001) Pipe Railing Manual
NAAMM EMLA 920 (2009) Guide Specifications for Metal Lathing and
Furring
NAAMM HMMA 801 (2012) Glossary of Terms for Hollow Metal Doors and
Frames
NAAMM HMMA 802 (2007) Manufacturing of Hollow Metal Doors and
Frames
NAAMM HMMA 810 (2009) Hollow Metal Doors
NAAMM HMMA 820 (2008) Hollow Metal Frames
NAAMM HMMA 830 (2002) Hardware Selection for Hollow Metal Doors
and Frames
NAAMM HMMA 840 (2007) Installation and Storage of Hollow Metal
Doors and Frames
NAAMM HMMA 850 (2000) Fire Rated Hollow Metal Doors and Frames
NAAMM HMMA 862 (2003) Guide Specifications for Commercial Security
Hollow Metal Doors and Frames
NAAMM HMMA 863 (2004) Guide Specifications for Detention Security
Hollow Metal Doors and Frames
NAAMM HMMA HMM (1999; R2000) Hollow Metal Manual
NAAMM MBG 531 (2009) Metal Bar Grating Manual
NAAMM MBG 532 (2009) Heavy Duty Metal Bar Grating Manual
NATIONAL BOARD OF BOILER AND PRESSURE VESSEL INSPECTORS (NBBI)
NBBI NB-23 (2011; AMD 2008; AMD 2009; AMD 2010) National Board
Inspection Code
NBBI NB-27 (1991) National Board Rules and Recommendations for
the Design and Construction of Boiler Blowoff
Page 174
Systems
NATIONAL CABLE AND TELECOMMUNICATIONS ASSOCIATION (NCTA)
NCTA RP (2003) NCTA Recommended Practices for Measurements
on Cable Television Systems
NATIONAL CONCRETE MASONRY ASSOCIATION (NCMA)
NCMA TR127B (2010) Design Manual for Segmental Retaining Walls
NATIONAL COUNCIL ON RADIATION PROTECTION AND MEASUREMENTS (NCRP)
NCRP 102 (1989) Medical X-Ray, Electron Beam and Gamma-Ray
Protection for Energies up to 50 MeV (Equipment
Design, Performance and Use)
NCRP 144 (2003) Radiation Protection for Particle
Accelerator Facilities
NCRP 145 (2003) Radiation Protection in Dentistry
NCRP 49 (1976) Structural Shielding Design and Evaluation
for Medical Use of X-Rays and Gamma Rays of
Energies up to 10 MeV
NATIONAL DRILLING ASSOCIATION (NDA)
DCDMA TM (1991) DCDMA Technical Manual
NATIONAL ELECTRICAL CONTRACTORS ASSOCIATION (NECA)
NECA/BICSI 568 (2006) Standard for Installing Building
Telecommunications Cabling
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
ANSI ANSLG C78.41 (2006) For Electric Lamps–Guidelines for
Low-Pressure Sodium Lamps
ANSI ANSLG C78.42 (2009) For Electric Lamps: High-Pressure Sodium
Lamps
ANSI C119.1 (2011) Electric Connectors – Sealed Insulated
Underground Connector Systems Rated 600 Volts
ANSI C12.1 (2008) Electric Meters Code for Electricity Metering
ANSI C12.18 (2006) Protocol Specification for ANSI Type 2
Optical Port
ANSI C12.20 (2010) Electricity Meters – 0.2 and 0.5 Accuracy
Classes
ANSI C12.7 (2005) Requirements for Watthour Meter Sockets
Page 175
ANSI C136.10 (2010) American National Standard for Roadway and
Area Lighting Equipment-Locking-Type Photocontrol
Devices and Mating Receptacles–Physical and
Electrical Interchangeability and Testing
ANSI C136.11 (2006) American Standard for Roadway Lighting
Equipment Series Sockets and Series Sockets
Receptacles
ANSI C136.13 (2004; R 2009) American National Standard for
Roadway Lighting Equipment, Metal Brackets for Wood
Poles
ANSI C136.15 (2011) American National Standard for Roadway
Lighting Equipment – High-Intensity-Discharge and
Low-Pressure Sodium Lamps in Luminaires – Field
Identification
ANSI C136.2 (2004; R 2009) American National Standard for
Roadway and Area Lighting Equipment: Luminaires
Voltage Classification
ANSI C136.21 (2004; R 2009) American National Standard for
Roadway and Area Lighting Equipment – Vertical
Tenons Used with Post-Top-Mounted Luminaires
ANSI C136.3 (2005; R 2009) American National Standard for
Roadway and Area Lighting Equipment Luminaire
Attachments
ANSI C136.6 (2004) American National Standard for Roadway
Lighting Equipment – Metal Heads and Reflector
Assemblies – Mechanical and Optical
Interchangeability
ANSI C136.9 (2003) American National Standard for Roadway and
Area Lighting Equipment – Socket Support Assemblies
for Metal Heads – Mechanical Interchangeability
ANSI C29.1 (1988; R 2012) American National Standard for
Electrical Power Insulators–Test Methods
ANSI C29.2 (2012) American National Standard for Insulators -
Wet-Process Porcelain and Toughened Glass -
Suspension Type
ANSI C29.3 (1986; R 2012) American National Standard for Wet
Process Porcelain Insulators – Spool Type
ANSI C29.4 (1989; R 2012) Standard for Wet-Process Porcelain
Insulators – Strain Type
ANSI C29.5 (1984; R 2002) Wet-Process Porcelain Insulators
(Low and Medium Voltage Pin Type)
ANSI C29.9 (1983; R 2012) American National Standard for
Wet-Process Porcelain Insulators – Apparatus,
Page 176
Post-Type
ANSI C37.44 (1981; R 1992) Special for Distribution Oil Cutouts
and Fuze Links
ANSI C62.61 (1993) American National Standard for Gas Tube
Surge Arresters on Wire Line Telephone Circuits
ANSI C78.1381 (1998) American National Standard for Electric
Lamps – 250-Watt, 70 Watt, M85 Metal-Halide Lamps
ANSI C78.23 (1995; R 2003) American National Standard for
Incandescent Lamps – Miscellaneous Types
ANSI C78.379 (2006) American National Standard for Electric
Lamps–Classification of the Beam Patterns of
Reflector Lamps
ANSI C78.389 (2004; R 2009) American National Standard for
Electric Lamps – High Intensity Discharge (HID) -
Methods of Measuring Characteristics
ANSI C78.40 (2011) American National Standard for Mercury
Lamps–Specifications
ANSI C78.901 (2005) American National Standard for Electric
Lamps – Single Base Fluorescent Lamps–Dimensional
and Electrical Characteristics
ANSI C80.1 (2005) American National Standard for Electrical
Rigid Steel Conduit (ERSC)
ANSI C80.3 (2005) American National Standard for Electrical
Metallic Tubing (EMT)
ANSI C80.5 (2005) American National Standard for Electrical
Rigid Aluminum Conduit
ANSI C82.1 (2004) American National Standard for Electric Lamp
Ballasts – Line Frequency Fluorescent Lamp Ballasts
ANSI C82.2 (2002) American National Standard for Lamp
Ballasts–Methods of Measurement of Fluorescent
Lamp Ballasts
ANSI C82.4 (2002) American National Standard for Ballasts for
High-Intensity-Discharge and Low-Pressure Sodium
(LPS) Lamps (Multiple-Supply Type)
ANSI NEMA ANSLG C78.390 (2006) Method of Designation for Electric Lamps,
-Miniature and Sealed-Beam Incandescent Lamps
ANSI Z535.1 (2006; R 2011) American National Standard for
Safety–Color Code
ANSI/ANSLG C78.43 (2013) American National Standard for Electric
Lamps – Single-Ended Metal-Halide Lamps
Page 177
ANSI/NEMA C78.LL 1256 (2003) Procedures for Fluorescent Lamp Sample
Preparation and the Toxicity Characteristic
Leaching Procedure (TCLP)
ANSI/NEMA LD 3 (2005) Standard for High-Pressure Decorative
Laminates
ANSI/NEMA OS 1 (2008; Amd 2010) Sheet-Steel Outlet Boxes, Device
Boxes, Covers, and Box Supports
ANSI/NEMA OS 2 (2008; AMD 2010) Nonmetallic Outlet Boxes, Device
Boxes, Covers, and Box Supports
ANSI/NEMA PB 2.1 (2013) General Instructions for Proper Handling,
Installation, Operation and Maintenance of
Deadfront Distribution Switchboards Rated 600 V or
Less
ANSI/NEMA WC 66 (2013) Performance Standard for Category 6 and
Category 7 100 Ohm Shielded and Unshielded Twisted
Pairs
ANSI/NEMA WC 71/ICEA S-96(-169599) Standard for Nonshielded Cables Rated
2001-5000 Volts for use in the Distribution of
Electric Energy
NEMA 107 (1987; R 1993) Methods of Measurement of Radio
Influence Voltage (RIV) of High-Voltage Apparatus
(inactive)
NEMA 250 (2008) Enclosures for Electrical Equipment (1000
Volts Maximum)
NEMA AB 1 (2002) Molded-Case Circuit Breakers, Molded Case
Switches, and Circuit-Breaker Enclosures
NEMA AB 3 (2013) Molded Case Circuit Breakers and Their
Application
NEMA ANSLG C78.377 (2011) American National Standard for Electric
Lamps— Specifications for the Chromaticity of Solid
State Lighting Products
NEMA ANSLG C78.380 (2007) Electric Lamps – High Intensity Discharge
Lamps, Method of Designation
NEMA ANSLG C78.44 (2008) For Electric Lamps – Double-Ended Metal
Halide Lamps
NEMA ANSLG C78.81 (2013) American National Standard for Electric
Lamps–Double-Capped Fluorescent Lamps–Dimensional
and Electrical Characteristics
NEMA ANSLG C82.11 (2011) Lamp Ballasts – High-Frequency Fluorescent
Lamp Ballasts
NEMA ANSLG C82.14 (2006) Lamp Ballasts Low-Frequency Square Wave
Page 178
Electronic Ballasts — for Metal Halide Lamps
NEMA ANSLG C82.9 (2010) American National Standard for Lamp
Ballasts— High-Intensity Discharge and Low-Pressure
Sodium Lamps— Definitions
NEMA BU 1.1 (2010) General Instructions for Proper Handling,
Installation, Operation and Maintenance of Busway
Rated 600 V or Less
NEMA C119.4 (2011) Electric Connectors – Connectors for Use
Between Aluminum-to-Aluminum or Aluminum-to-Copper
Conductors Designed for Normal Operation at or
Below 93 Degrees C and Copper-to-Copper Conductors
Designed for Normal Operation at or Below 100
Degrees C
NEMA C12.19 (2008) Utility Industry End Device Data Tables
NEMA C12.4 (1984; R 2011) Registers – Mechanical Demand
NEMA C135.4 (1987) Zinc-Coated Ferrous Eyebolts and Nuts for
Overhead Line Construction
NEMA C136.10 (2010) American National Standard for Roadway and
Area Lighting Equipment-Locking-Type Photocontrol
Devices and Mating Receptacles–Physical and
Electrical Interchangeability and Testing
NEMA C136.20 (2012) American National Standard for Roadway and
Area Lighting Equipment – Fiber Reinforced
Composite (FRC) Lighting Poles
NEMA C136.31 (2010) American National for Roadway and Area
Lighting Equipment – Luminaire Vibration
NEMA C37.50 (2012) American National Standard for
Switchgear–Low-Voltage AC Power Circuit Breakers
Used in Enclosures – Test Procedures
NEMA C37.51 (2003; R 2010; Addenda 2010) American National
Standard for Switchgear–Metal Enclosed Low-Voltage
AC Power, Circuit-Breaker Switchgear
Assemblies-Conformance Test Procedures
NEMA C37.72 (1987) Manually-Operated, Dead-Front Padmounted
Switchgear with Load Interrupting Switches and
Separable Connectors for Alternating-Current Systems
NEMA C50.10 (1990) Rotating Electrical Machinery – Synchronous
Machines
NEMA C50.41 (2012) American National Standard for Polyphase
Induction Motors for Power Generating Stations
NEMA C78.LL 3 (2003) Electric Lamps – Procedures for High
Intensity Discharge Lamp Sample Preparation and the
Page 179
Toxicity Characteristic Leaching Procedure
NEMA C82.77 (2002) Harmonic Emission Limits – Related Power
Quality Requirements for Lighting Equipment
NEMA DC 3 (2008) Residential Controls – Electrical
Wall-Mounted Room Thermostats
NEMA ESPG (2009-2010) Electrical Standards and Product Guide
(ESPG)
NEMA FB 1 (2012) Standard for Fittings, Cast Metal Boxes, and
Conduit Bodies for Conduit, Electrical Metallic
Tubing, and Cable
NEMA FU 1 (2012) Low Voltage Cartridge Fuses
NEMA IA 2 (2005) Programmable Controllers – Parts 1 thru 8
NEMA ICS 1 (2000; R 2008; E 2010) Standard for Industrial
Control and Systems: General Requirements
NEMA ICS 10 Part 2 (2005) AC Transfer Equipment, Part 2: Static AC
Transfer Equipment
NEMA ICS 2 (2000; R 2005; Errata 2008) Standard for
Controllers, Contactors, and Overload Relays Rated
600 V
NEMA ICS 3 (2005; R 2010) Medium-Voltage Controllers Rated
2001 to 7200 V AC
NEMA ICS 3.1 (2009) Guide for the Application, Handling,
Storage, Installation and Maintenance of
Medium-Voltage AC Contactors, Controllers and
Control Centers
NEMA ICS 4 (2010) Terminal Blocks
NEMA ICS 5 (2000; R 2010) Control Circuit and Pilot Devices
NEMA ICS 6 (1993; R 2011) Enclosures
NEMA ICS 7 (2006) Adjustable-Speed Drives
NEMA ICS 8 (2011) Crane and Hoist Controllers
NEMA IEC 60529 (2004) Degrees of Protection Provided by Enclosures
(IP Code)
NEMA KS 1 (2001; R 2006) Enclosed and Miscellaneous
Distribution Equipment Switches (600 V Maximum)
NEMA LA 1 (2009) Standard for Surge Arresters
NEMA LD 3.1 (1995) Performance, Application, Fabrication, and
Installation of High-Pressure Decorative Laminates
Page 180
NEMA LI 1 (1998; R 2011) Industrial Laminating Thermosetting
Products
NEMA LL 1 (1997; R 2002) Procedures for Linear Fluorescent
Lamp Sample Preparation and the TCLP Extraction
NEMA LSD 25 (2008) Best Practices for Metal Halide Lighting
Systems, Plus Questions and Answers about Lamp
Ruptures in Metal Halide Lighting Systems
NEMA MG 1 (2011; Errata 2012) Motors and Generators
NEMA MG 10 (2001; R 2007) Energy Management Guide for
Selection and Use of Fixed Frequency Medium AC
Squirrel-Cage Polyphase Induction Motors
NEMA MG 11 (1977; R 2012) Energy Management Guide for
Selection and Use of Single Phase Motors
NEMA MG 2 (2014) Safety Standard for Construction and Guide
for Selection, Installation and Use of Electric
Motors and Generators
NEMA PB 1 (2011) Panelboards
NEMA PB 2 (2011) Deadfront Distribution Switchboards
NEMA PE 1 (2003) Uninterruptible Power Systems (UPS)
Specification and Performance Verification
NEMA PREMIUM (2007) General Specification for Consultants,
Industrial and Municipal: NEMA Premium Efficiency
Electric Motors (600 Volts or Less)
NEMA RN 1 (2005; R 2013) Polyvinyl-Chloride (PVC) Externally
Coated Galvanized Rigid Steel Conduit and
Intermediate Metal Conduit
NEMA SG 2 (1993) Standard for High-Voltage Fuses
NEMA SG 4 (2009; R 2013) AC High-Voltage Circuit Breakers
NEMA SG 6 (2000) Standard for Power Switching Equipment
NEMA SM 23 (1991; R 2002) Steam Turbines for Mechanical Drive
Service
NEMA ST 1 (1988; R 1994; R 1997) Specialty Transformers
(Except General Purpose Type)
NEMA ST 20 (1992; R 1997) Standard for Dry-Type Transformers
for General Applications
NEMA TC 14 (2002) Standard for Reinforced Thermosetting Resin
Conduit (RTRC) and Fittings
NEMA TC 2 (2013) Standard for Electrical Polyvinyl Chloride
Page 181
(PVC) Conduit
NEMA TC 3 (2013) Standard for Polyvinyl Chloride (PVC)
Fittings for Use With Rigid PVC Conduit and Tubing
NEMA TC 6 & 8 (2013) Standard for Polyvinyl Chloride (PVC)
Plastic Utilities Duct for Underground Installations
NEMA TC 7 (2013) Standard for Smooth-Wall Coilable Electrical
Polyethylene Conduit
NEMA TC 9 (2004) Standard for Fittings for Polyvinyl Chloride
(PVC) Plastic Utilities Duct for Underground
Installation
NEMA TP 1 (2002) Guide for Determining Energy Efficiency for
Distribution Transformers
NEMA TR 1 (1993; R 2000) Transformers, Regulators, and
Reactors
NEMA TS-1 (1989; R 2005) Traffic Control Systems (not
recommended for new designs)
NEMA TS-2 (2003) Traffic Controller Assemblies with NTCIP
Requirements – Version 02.06
NEMA VE 1 (2009) Standard for Metal Cable Tray Systems
NEMA VE 2 (2013) Cable Tray Installation Guidelines
NEMA WC 2 (1980; Rev 1 1989; R 1998; R 2005) Standard for
Steel Armor and Associated Coverings for
Impregnated Paper Insulated Cables (ICEA S-67-401
5th Edition)
NEMA WC 27500 (2012) Standard for Aerospace and Industrial
Electrical Cable
NEMA WC 3 (1992; Rev 1 1994) Rubber-Insulated Wire and Cable
for the Transmission and Distribution of Electrical
Energy
NEMA WC 58/ICEA S-75-381(2008) Portable and Power Feeder Cables for Use in
Mines and Similar Applications
NEMA WC 7 (1988; Rev 3 1996)
Cross-Linked-Thermosetting-Polyethylene-Insulated
Wire and Cable for the Transmission and
Distribution of Electrical Energy
NEMA WC 70 (2009) Power Cable Rated 2000 V or Less for the
Distribution of Electrical Energy–S95-658
NEMA WC 72 (1999; R 2004) Standard for Continuity of Coating
Testing for Electrical Conductors
Page 182
NEMA WC 74/ICEA S-93-639(2012) 5-46 kV Shielded Power Cable for Use in the
Transmission and Distribution of Electric Energy
NEMA WC 8 (1988; Rev 3 1996)
Ethylene-Propylene-Rubber-Insulated Wire and Cable
for the Transmission and Distribution of Electrical
Energy
NEMA WD 1 (1999; R 2005; R 2010) Standard for General Color
Requirements for Wiring Devices
NEMA WD 6 (2012) Wiring Devices Dimensions Specifications
NEMA WD 7 (2011) Occupancy Motion Sensors Standard
NEMA Z535.1 (2006; R 2011) Safety Colors
NEMA Z535.4 (2011) American National Standard for Product
Safety Signs and Labels
NEMA/ANSI C12.10 (2011) Physical Aspects of Watthour Meters – Safety
Standards
NEMA/ANSI C12.11 (2007) Instrument Transformers for Revenue
Metering, 10 kV BIL through 350 kV BIL (0.6 kV NSV
through 69 kV NSV)
NEMA/ANSI C29.7 (1996; 2002) American National Standard for Wet
Process Porcelain Insulators – High-Voltage Line
Post Type
NATIONAL ELEVATOR INDUSTRY, INC. (NEII)
NEII-1 (2000; R thru 2010) Building Transportation
Standards and Guidelines, including the Performance
Standards Matrix for New Elevator Installation
NATIONAL ENVIRONMENTAL BALANCING BUREAU (NEBB)
NEBB Commissioning Standa(r2d009) Procedural Standards for Whole Building
Systems Commissioning of New Construction; 3rd
Edition
NEBB MASV (2006) Procedural Standards for Measurements and
Assessment of Sound and Vibration
NEBB PROCEDURAL STANDARDS(2005) Procedural Standards for TAB (Testing,
Adjusting and Balancing) Environmental Systems
NATIONAL FENESTRATION RATING COUNCIL (NFRC)
NFRC 100 (2010) Procedure for Determining Fenestration
Product U-Factors
NFRC 200 (2010) Procedure for Determining Fenestration
Product Solar Heat Gain Coefficient and Visible
Transmittance at Normal Incidence
Page 183
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 1 (2012; TIA 11-1) Fire Code
NFPA 10 (2013) Standard for Portable Fire Extinguishers
NFPA 101 (2012; Amendment 1 2012) Life Safety Code
NFPA 105 (2013) Standard for Installation of Smoke Door
Assemblies and Other Opening Protectives
NFPA 11 (2010; TIA 10-1) Standard for Low-, Medium- and
High- Expansion Foam
NFPA 110 (2013) Standard for Emergency and Standby Power
Systems
NFPA 111 (2013) Standard on Stored Electrical Energy
Emergency and Standby Power Systems
NFPA 12 (2011) Standard on Carbon Dioxide Extinguishing
Systems
NFPA 1221 (2013) Standard for the Installation, Maintenance
and Use of Emergency Services Communications Systems
NFPA 12A (2009) Standard on Halon 1301 Fire Extinguishing
Systems
NFPA 13 (2013; TIA 10-1; TIA 11-2; ERTA 2014) Standard for
the Installation of Sprinkler Systems
NFPA 13D (2013) Standard for the Installation of Sprinkler
Systems in One- and Two-Family Dwellings and
Manufactured Homes
NFPA 13E (2010) Recommended Practice for Fire Department
Operations in Properties Protected by Sprinkler and
Standpipe Systems
NFPA 13R (2013) Standard for the Installation of Sprinkler
Systems in Residential Occupancies Up to and
Including Four Stories in Height
NFPA 14 (2013) Standard for the Installation of Standpipes
and Hose Systems
NFPA 15 (2012) Standard for Water Spray Fixed Systems for
Fire Protection
NFPA 16 (2011) Standard for Installation of Foam-Water
Sprinkler and Foam-Water Spray Systems
NFPA 17 (2013) Standard for Dry Chemical Extinguishing
Systems
NFPA 170 (2012) Standard for Fire Safety and Emergency
Page 184
Symbols
NFPA 17A (2013) Standard for Wet Chemical Extinguishing
Systems
NFPA 1961 (2013) Standard on Fire Hose
NFPA 1963 (2014) Standard for Fire Hose Connections
NFPA 1971 (2013; TIA 13-1; TIA 13-2; TIA 13-3) Standard on
Protective Ensembles for Structural Fire Fighting
and Proximity Fire Fighting
NFPA 20 (2013) Standard for the Installation of Stationary
Pumps for Fire Protection
NFPA 2001 (2012; AMD 1 2012) Standard on Clean Agent Fire
Extinguishing Systems
NFPA 211 (2013) Standard for Chimneys, Fireplaces, Vents,
and Solid Fuel-Burning Appliances
NFPA 214 (2011; Errata 2011) Standard on Water-Cooling Towers
NFPA 22 (2013) Standard for Water Tanks for Private Fire
Protection
NFPA 220 (2012) Standard on Types of Building Construction
NFPA 24 (2013) Standard for the Installation of Private
Fire Service Mains and Their Appurtenances
NFPA 241 (2013) Standard for Safeguarding
Construction,Alteration, and Demolition Operations
NFPA 25 (2014) Standard for the Inspection, Testing, and
Maintenance of Water-Based Fire Protection Systems
NFPA 252 (2012) Standard Methods of Fire Tests of Door
Assemblies
NFPA 253 (2011) Standard Method of Test for Critical Radiant
Flux of Floor Covering Systems Using a Radiant Heat
Energy Source
NFPA 255 (2006; Errata 2006) Standard Method of Test of
Surface Burning Characteristics of Building
Materials
NFPA 257 (2012) Standard on Fire Test for Window and Glass
Block Assemblies
NFPA 262 (2011) Standard method of Test for Flame Travel and
Smoke of Wires and Cables for Use in Air-Handling
Spaces
NFPA 265 (2011) Standard Methods of Fire Tests for
Page 185
Evaluating Room Fire Growth Contribution of Textile
Coverings on Full Height Panels and Walls
NFPA 268 (2012) Standard Test Method for Determining
Ignitibility of Exterior Wall Assemblies Using a
Radiant Heat Energy Source
NFPA 286 (2011) Standard Methods of Fire Tests for
Evaluating Contribution of Wall and Ceiling
Interior Finish to Room Fire Growth
NFPA 291 (2013) Recommended Practice for Fire Flow Testing
and Marking of Hydrants
NFPA 30 (2012; Errata 2011; Errata 2011) Flammable and
Combustible Liquids Code
NFPA 303 (2011) Fire Protection Standards for Marinas and
Boatyards
NFPA 306 (2014) Standard for Control of Gas Hazards on
Vessels
NFPA 30A (2012; Errata 2011) Code for Motor Fuel Dispensing
Facilities and Repair Garages
NFPA 31 (2011) Standard for the Installation of Oil-Burning
Equipment
NFPA 329 (2010) Recommended Practice for Handling Releases
of Flammable and Combustible Liquids and Gases
NFPA 37 (2010; TIA 10-1; TIA 13-2; TIA 13-3) Standard for
the Installation and Use of Stationary Combustion
Engines and Gas Turbines
NFPA 385 (2012) Standard for Tank Vehicles for Flammable and
Combustible Liquids
NFPA 407 (2012; TIA 11-1) Standard for Aircraft Fuel
Servicing
NFPA 409 (2011; Errata 11-1) Standard on Aircraft Hangars
NFPA 418 (2011) Standard for Heliports
NFPA 45 (2011) Standard on Fire Protection for Laboratories
Using Chemicals
NFPA 496 (2013) Standard for Purged and Pressurized
Enclosures for Electrical Equipment
NFPA 505 (2013) Fire Safety Standard for Powered Industrial
Trucks Including Type Designations, Areas of Use,
Conversions, Maintenance, and Operations
NFPA 51B (2014) Standard for Fire Prevention During Welding,
Page 186
Cutting, and Other Hot Work
NFPA 54 (2012) National Fuel Gas Code
NFPA 55 (2013; TIA 12-1; TIA 13-2; Errata 2013) Compressed
Gases and Cryogenic Fluids Codes
NFPA 58 (2014; TIA 13-1; TIA 13-2; Errata 13-1; TIA 13-3;
Errata 14-2) Liquefied Petroleum Gas Code
NFPA 65 (1993) Processing and Finishing of Aluminum
NFPA 664 (2012; Errata 13-1; Errata 13-2) Standard for the
Prevention of Fires and Explosions in Wood
Processing and Woodworking Facilities
NFPA 70 (2014; AMD 1 2013; Errata 1 2013; AMD 2 2013;
Errata 2 2013) National Electrical Code
NFPA 701 (2010) Standard Methods of Fire Tests for Flame
Propagation of Textiles and Films
NFPA 704 (2012) Standard System for the Identification of
the Hazards of Materials for Emergency Response
NFPA 70B (2013) Recommended Practice for Electrical
Equipment Maintenance
NFPA 70E (2012; Errata 2012) Standard for Electrical Safety
in the Workplace
NFPA 72 (2013) National Fire Alarm and Signaling Code
NFPA 75 (2013; Errata 2013) Standard for the Protection of
Information Technology Equipment
NFPA 77 (2014) Recommended Practice on Static Electricity
NFPA 780 (2014) Standard for the Installation of Lightning
Protection Systems
NFPA 79 (2012) Electrical Standard for Industrial Machinery
NFPA 80 (2013) Standard for Fire Doors and Other Opening
Protectives
NFPA 80A (2012) Recommended Practice for Protection of
Buildings from Exterior Fire Exposures
NFPA 82 (2014) Standard on Incinerators and Waste and Linen
Handling Systems and Equipment
NFPA 85 (2011; Errata 2011) Boiler and Combustion Systems
Hazards Code
NFPA 85C (1997) Prevention of Furnace Explosions in Fuel
Oil- and Natural Gas-Fired Single Burner
Page 187
Boiler-Furnaces
NFPA 90A (2012) Standard for the Installation of Air
Conditioning and Ventilating Systems
NFPA 90B (2012) Standard for the Installation of Warm Air
Heating and Air Conditioning Systems
NFPA 91 (2010) Standard for Exhaust Systems for Air
Conveying of Vapors, Gases, Mists and
Noncombustible Particulate Solids
NFPA 96 (2014) Standard for Ventilation Control and Fire
Protection of Commercial Cooking Operations
NFPA 99 (2012; TIA 11-1; TIA 11-2; Errata 12-1; TIA 12-3;
TIA 13-4; TIA 13-5) Health Care Facilities Code
NATIONAL FLUID POWER ASSOCIATION (NFLPA)
ANSI/NFLPA T3.12.3 (1992; Rev 2) Pneumatic Fluid Power – Pressure
Regulator – Industrial Type
ANSI/NFLPA T3.16.2 (1997; Rev 1; Reapproved 2005) Hydraulic Fluid
Power – Design for Nonintegral Industrial Reservoirs
NFLPA T2.13.1 (2007; 5th Ed) Recommended Practice – Hydraulic
Fluid Power – Use Of Fire Resistant Fluids In
Industrial Systems
NFLPA T3.28.9 (1989; R 2009; 2nd Ed) Fluid Power Systems and
Products – Moving Parts Fluid Controls – Method of
Diagramming
NFLPA T3.5.1 (2002; R 2010; 3rd Ed) Hydraulic Fluid Power -
Valves, Mounting Surfaces
NATIONAL HARDWOOD LUMBER ASSOCIATION (NHLA)
NHLA Rules (2011) Rules for the Measurement & Inspection of
Hardwood & Cypress
NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING TECHNOLOGIES
(NICET)
NICET 1014-7 (2010) Program Detail Manual for Certification in
the Field of Fire Protection Engineering Technology
(Field Code 003) Subfield of Automatic Sprinkler
System Layout
NATIONAL INSTITUTE FOR OCCUPATIONAL SAFETY AND HEALTH (NIOSH)
NIOSH 2003-154 (2003; 4th Ed; Supple 3) NIOSH Manual of Analytical
Methods
NIOSH 2008-132 (2008) Attention Emergency Responders – Guidance on
Emergency Responder – Personal Protective Equipment
Page 188
(PPE) for Response to Chemical, Biological,
Radiological, and Nuclear (CBRN) Terrorism Incidents
NIOSH 81-123 (1981) Occupational Health Guideline for Chemical
Hazards, (Vols. 1, 2, and 3)
NIOSH 85-115 (1985) Occupational Safety and Health Guidance
Manual for Hazardous Waste Site Activities
NIOSH 99-109 (Latest) Certified Equipment List
NATIONAL INSTITUTE OF JUSTICE (NIJ)
NIJ Std 0108.01 (1985) Ballistic Resistant Protective Materials
NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (NIST)
NIST BEES 4.0 (2007) Building for Environmental and Economic
Sustainability
NIST FIPS 140-2 (2001) Security Requirements for Cryptographic
Modules
NIST FIPS 197 (2001) Advance Encryption Standard
NIST HB 135 (1995; Annual Suppl 2010) Life Cycle Costing Manual
for the Federal Energy Management Program
NIST HB 44 (2013) Specifications, Tolerances, and Other
Technical Requirements for Weighing and Measuring
Devices
NIST IR 91-4756 (1991) Laboratory Accreditation Activities in the
United States
NIST PS 1 (2009) DOC Voluntary Product Standard PS 1-07,
Structural Plywood
NIST SP 250 (1991) Calibration Services Users Guide
NATIONAL LIME ASSOCIATION (NLA)
NLA BUL 326 (2004) Lime-Treated Soil Construction Manual: Lime
Stabilization and Lime Modification
NATIONAL PARK SERVICE (NPS)
NPS Hist Prop (1995) National Standards for the Treatment of
Historic Properties with Guidelines for Preserving,
Rehabilitating, Restoring, and Reconstructing
Historic Buildings
NPS TPS Brief 1 (2000) Assessing Cleaning and Water-Repellent
Treatments for Historic Masonry Buildings
NPS TPS Brief 2 (1998) Repointing Mortar Joints in Historic Masonry
Buildings
Page 189
NATIONAL PRECAST CONCRETE ASSOCIATION (NPCA)
NPCA QC Manual (2012) Quality Control Manual for Precast and
Prestressed Concrete Plants
NATIONAL READY MIXED CONCRETE ASSOCIATION (NRMCA)
NRMCA CPMB 100 (2000; R 2006) Concrete Plant Standards
NRMCA QC 3 (2011) Quality Control Manual: Section 3, Plant
Certifications Checklist: Certification of Ready
Mixed Concrete Production Facilities
NRMCA TMMB 100 (2001; R 2007) Truck Mixer, Agitator and Front
Discharge Concrete Carrier Standards
NATIONAL ROOFING CONTRACTORS ASSOCIATION (NRCA)
NRCA 0405 (2001; 5th Ed) Roofing and Waterproofing Manual
NRCA 0409 (2006) Architectural Sheet Metal and Metal Roofing
Manual
NRCA 0418 (2009) Steep-slope Roof System Manual
NRCA 0420 (2010) Architectural Metal Flashing, Condensation
Control and Reroofing
NRCA 3740 (2005) The NRCA Waterproofing Manual
NRCA 3758 (2009) Guidelines for Roof-mounted Photovoltaic
System Installation
NRCA 3760 Building Owners Guide to Roof-mounted Photovoltaic
Systems
NRCA C3701 (2002) Repair Manual for Low Slope Membrane Roof
Systems
NRCA Details (2003) NRCA Roof Perimeter Flashing Systems
Construction Details for Class 1 Roof Construction
NRCA RoofMan (2011 thru 2014) The NRCA Roofing Manual
NATIONAL SECURITY TELECOMMUNICATIONS AND INFORMATION SYSTEMS
SECURITY (NSTISS)
NSTISSAM TEMPEST/2-95 (1995; Am A 2000) RED/BLACK Installation Guidance
NSTISSI-7003 (1996) Protective Distribution Systems (PDS)
NATIONAL TERRAZZO & MOSAIC ASSOCIATION (NTMA)
NTMA Info Guide (2000) Terrazzo Information Guide
NATURAL RESOURCE, AGRICULTURAL AND ENGINEERING SERVICE (NRAES)
Page 190
NRAES 54 (1992) On-Farm Composting Handbook
NOFMA: THE WOOD FLOORING MANUFACTURERS ASSOCIATION (NOFMA)
NOFMA Grading Rules (1999) Official Flooring Grading Rules
NORTH AMERICAN INSULATION MANUFACTURERS ASSOCIATION (NAIMA)
NAIMA AH112 (1993) Cleaning Fibrous Glass or Lined Sheet Metal
Ducts
NAIMA AH116 (2002, 5th Ed) Fibrous Glass Duct Construction
Standards
NAIMA AH122 (2006) Cleaning Fibrous Insulated Duct Systems -
Recommended Practices
NAIMA AH127 (1999) Impact of Duct Cleaning on Internal Duct
Insulation
NORTHEASTERN LUMBER MANUFACTURERS ASSOCIATION (NELMA)
NELMA Grading Rules (2013) Standard Grading Rules for Northeastern
Lumber
NSF INTERNATIONAL (NSF)
NSF 372 (2011) Drinking Water System Components – Lead
Content
NSF 53A (2012) Drinking Water Treatment Units – Health
Effects
NSF Food Equipment (2005) NSF Product Listings of Food Equipment and
Related Products, Components and Materials
NSF/ANSI 12 (2012) Automatic Ice Making Equipment
NSF/ANSI 13 (2012) Refuse Processors and Processing Equipment
NSF/ANSI 14 (2014) Plastics Piping System Components and
Related Materials
NSF/ANSI 169 (2012)Special Purpose Food Equipment and Devices
NSF/ANSI 18 (2012) Manual Food and Beverage Dispensing Equipment
NSF/ANSI 2 (2012) Food Equipment
NSF/ANSI 20 (2012) Commercial Bulk Milk Dispensing Equipment
NSF/ANSI 21 (2012) Thermoplastic Refuse Containers
NSF/ANSI 222 (2006e; R 2011) Ozone Generators
NSF/ANSI 25 (2012) Vending Machines for Food and Beverage
Page 191
NSF/ANSI 29 (2012) Detergent and Chemical Feeders for
Commercial Spray-type Dishwashing Machines
NSF/ANSI 3 (2012) Commercial Warewashing Equipment
NSF/ANSI 35 (2012) High Pressure Decorative Laminates for
Surfacing Food Service Equipment
NSF/ANSI 36 (2012) Dinnerware
NSF/ANSI 37 (2012) Air Curtains for Entranceways in Food and
Food Service Establishments
NSF/ANSI 4 (2009; Addenda 2012) Commercial Cooking,
Rethermalization and Powered Hot Food Holding and
Transport Equipment
NSF/ANSI 42 (2013) Drinking Water Treatment Units – Aesthetic
Effects
NSF/ANSI 51 (2012) Food Equipment Materials
NSF/ANSI 52 (2012) Supplemental Flooring
NSF/ANSI 59 (2012) Mobile Food Carts
NSF/ANSI 6 (2012) Dispensing Freezers
NSF/ANSI 60 (2013) Drinking Water Treatment Chemicals – Health
Effects
NSF/ANSI 61 (2013) Drinking Water System Components – Health
Effects
NSF/ANSI 7 (2014) Commercial Refrigerators and Freezers
NSF/ANSI 8 (2012) Commercial Powered Food Preparation Equipment
OPC FOUNDATION (OPC)
OPC DA (2002) OPC Data Access (DA) Specification; Version
2.05a
ORGANISATION FOR ECONOMIC CO-OPERATION AND DEVELOPMENT (OECD)
OECD Test 203 (1992) Fish Acute Toxicity Test
PIPE FABRICATION INSTITUTE (PFI)
PFI ES 1 (2010) Internal Machining and Solid Machined
Backing Rings for Circumferential Butt Welds
PFI ES 11 (2003) Permanent Marking of Piping Materials
PFI ES 21 (2010) Internal Machining and Fit-up of GTAW Root
Pass Circumferential Butt Welds
Page 192
PFI ES 22 (2002; R 2006) Color Coding of Piping Materials
PFI ES 3 (2004) Fabricating Tolerances
PFI ES 31 (1992; R 2004) Standard for Protection of Ends of
Fabricated Piping Assemblies
PFI ES 35 (1998; R 2003) Nonsymmetrical Bevels and Joint
Configurations for Butt Welds
PFI ES 7 (2004) Minimum Length and Spacing for Welded Nozzles
PFI TB1 (2006) Pressure – Temperature Ratings of Seamless
Pipe Used in Power Plant Piping Systems
PLASTIC PIPE AND FITTINGS ASSOCIATION (PPFA)
PPFA Fire Man (2010) Firestopping: Plastic Pipe in Fire Resistive
Construction
PLASTICS PIPE INSTITUTE (PPI)
PPI TR-21 (2001) Thermal Expansion and Contraction in Plastic
Piping Systems
PLUMBING AND DRAINAGE INSTITUTE (PDI)
PDI G 101 (2010) Testing and Rating Procedure for Hydro
Mechanical Grease Interceptors with Appendix of
Installation and Maintenance
PDI WH 201 (2010) Water Hammer Arresters Standard
PLUMBING AND MECHANICAL CONTRACTORS ASSOCIATION (PMCA)
PPIC Seismic Restraint (1982) Guidelines for Seismic Restraints of
Mechanical Systems and Plumbing Systems
PLUMBING-HEATING-COOLING CONTRACTORS NATIONAL ASSOCIATION (PHCC)
NAPHCC NSPC (209) National Standard Plumbing Code
PORCELAIN ENAMEL INSTITUTE (PEI)
PEI 1001 (1996) Specification for Architectural Porcelain
Enamel (ALS-100)
PEI CG-3 (2005) Color Guide for Architectural Porcelain
Enamel
POST-TENSIONING INSTITUTE (PTI)
PTI DC35.1 (2004) Recommendations for Prestressed Rock and
Soil Anchors
PTI M10.2 (2000) Specifications for Unbonded Single Strand
Page 193
Tendons
PTI M55.1 (2012) Specification for Grouting of Post-Tensioned
Structures
PTI TAB.1 (2006) Post-Tensioning Manual
PRECAST/PRESTRESSED CONCRETE INSTITUTE (PCI)
PCI BDM (2011) Precast Prestressed Concrete Bridge Design
Manual
PCI JR-382 (1993) PCI Journal: Recommended Practice for
Design, Manufacture and Installation of Prestressed
Concrete Piling
PCI MNL-116 (1999) Manual for Quality Control for Plants and
Production of Structural Precast Concrete Products,
4th Edition
PCI MNL-117 (1996) Manual for Quality Control for Plants and
Production of Architectural Precast Concrete
Products, 3rd Edition
PCI MNL-120 (2010) PCI Design Handbook – Precast and
Prestressed Concrete, 6th Edition
PCI MNL-122 (2007) Architectural Precast Concrete, 3rd Edition
PCI MNL-124 (2011) Design for Fire Resistance of Precast
Prestressed Concrete, Third Edition
PCI MNL-128 (2001) Recommended Practice for Glass Fiber
Reinforced Concrete Panels, 4th Edition
PUGET SOUND CLEAN AIR AGENCY (PSCAA)
PSCAA Regulation Regulation I, II, and III
REDWOOD INSPECTION SERVICE (RIS) OF THE CALIFORNIA REDWOOD
ASSOCIATION (CRA)
RIS Grade Use (1998) Redwood Lumber Grades and Uses
RESEARCH COUNCIL ON STRUCTURAL CONNECTIONS (RCSC)
RCSC S348 (2009) RCSC Specification for Structural Joints
Using ASTM A325 or A490 Bolts
RUBBER MANUFACTURERS ASSOCIATION (RMA)
RMA IP-1 (2011) Conveyor and Elevator Belt Handbook; 3rd
Edition
RMA IP-2 (2009) Hose Handbook; 8th Edition
RMA IP-20 (2007) Specifications for Drives Using Classical
Page 194
V-Belts and Sheaves. Specifications for A, B, C,
and D Cross Sections
RMA IP-22 (2007) Specifications for Drives Using Narrow
V-Belts and Sheaves (Joint RMA/MPTA), 4th Edition
SCIENTIFIC CERTIFICATION SYSTEMS (SCS)
SCS Scientific Certification Systems (SCS)Indoor
Advantage
SCS SP-01 (2000) Environmentally Preferable Product
Specification for Architectural and Anti-Corrosive
Paints
SCIENTIFIC EQUIPMENT AND FURNITURE ASSOCIATION (SEFA)
SEFA 7 (1996) Recommended Practice for Laboratory and
Hospital Fixtures
SCREEN MANUFACTURERS ASSOCIATION (SMA)
SMA 1004 (1987; R 1998) Aluminum Tubular Frame Screens for
Windows
SEMICONDUCTOR EQUIPMENT AND MATERIALS INTERNATIONAL (SEMI)
SEMI C28 (2011) Specifications for Hydrofluoric Acid
SEMI C35 (2008) Specifications and Guidelines for Nitric Acid
SHEET METAL AND AIR CONDITIONING CONTRACTORS’ NATIONAL ASSOCIATION
(SMACNA)
ANSI/SMACNA 008 (2007) IAQ Guidelines for Occupied Buildings Under
Construction, 2nd Edition
SMACNA 1378 (1995) Thermoplastic Duct (PVC) Construction
Manual, 2nd Edition
SMACNA 1403 (2008) Accepted Industry Practice for Industrial
Duct Construction, 2nd Edition
SMACNA 1429 (1994) HVAC Systems Commissioning Manual, 1st
Edition
SMACNA 1520 (1999) Round Industrial Duct Construction
Standards, 3rd Edition
SMACNA 1767 (2001) Kitchen Ventilation Systems & Food Service
Equipment Fabrication & Installation Guidelines,
1st Edition
SMACNA 1780 (2002) HVAC Systems – Testing, Adjusting and
Balancing, 3rd Edition
SMACNA 1793 (2012) Architectural Sheet Metal Manual, 7th Edition
Page 195
SMACNA 1819 (2002) Fire, Smoke and Radiation Damper
Installation Guide for HVAC Systems, 5th Edition
SMACNA 1858 (2004) HVAC Sound And Vibration Manual – First
Edition
SMACNA 1884 (2003) Fibrous Glass Duct Construction Standards,
7th Edition
SMACNA 1922 (2004) Rectangular Industrial Duct Construction
Standards, 2nd Edition
SMACNA 1966 (2005) HVAC Duct Construction Standards Metal and
Flexible, 3rd Edition
SMACNA 1972 CD (2012) HVAC Air Duct Leakage Test Manual – 2nd
Edition
SMACNA 1981 (2008) Seismic Restraint Manual Guidelines for
Mechanical Systems, 3rd Edition
SMACNA 1987 (2006) HVAC Duct Systems Inspection Guide, 3rd
Edition
SINGLE PLY ROOFING INDUSTRY (SPRI)
ANSI/SPRI RD-1 (2009) Performance Standard for Retrofit Drains
ANSI/SPRI/FM 4435/ES-1 (2011) Wind Design Standard for Edge Systems Used
with Low Slope Roofing Systems
SPRI RP-4 (2008) Wind Design Standard for Ballasted
Single-Ply Roofing Systems
SOCIETY OF AUTOMOTIVE ENGINEERS INTERNATIONAL (SAE)
SAE AMS 2480 (2009; Rev H) Phosphate Treatment, Paint, Base
SAE AMS 3216 (2005; Rev G) Fluorocarbon (FKM) Rubber
High-Temperature – Fluid Resistant Low Compression
Set 70 To 80
SAE AMS 3779 (1990; Rev A; R 1994) Tape Adhesive, Pressure
Sensitive Thermal Radiation Resistant, Aluminum
Foil/Glass Cloth
SAE AMS-C-22542 (2012; Rev A; Stabilized (S) 2012) Cleaning
Compound, High Pressure Cleaner, Liquid
SAE AMS-C-6183 (2013; Rev A) Cork and Rubber Composition Sheet;
for Aromatic Fuel and Oil Resistant Gaskets
SAE AMS-P-5315 (2013, Rev B) Butadiene – Acrylonitrile (NBR)
Rubber For Fuel-Resistant Seals 60 To 70
SAE AMS-QQ-A-200/8 (1997; R 2012) Aluminum Alloy 6061, Bar, Rod,
Shapes, Tube, and Wire, Extruded
Page 196
SAE AMS2460 (2013; Rev A) Plating, Chromium
SAE AMS3275 (2009; Rev C) Sheet, Acrylonitrile Butadiene (NBR)
Rubber and Non-Asbestos Fiber Fuel and Oil Resistant
SAE AMS3611 (2011; Rev E; Stabilized (S) 2011) Plastic Sheet,
Polycarbonate General Purpose
SAE AMS5351 (1987; Rev F; R 2006) Steel Castings, Sand,
Corrosion and Moderate Hear Resistant, 13Cr,
Normalized and Tempered
SAE AMS7276 (2001; Rev H) Rings, Sealing Fluorocarbon (FKM)
Rubber High-Temperature Fluid Resistant Low
Compression Set 70 to 80
SAE ARP892 (1965; R 1994) DC Starter-Generator, Engine
SAE AS4841 (2012; Rev A) Fittings, 37 Degree Flared, Fluid
Connection
SAE AS4842 (1995; R 2004) Fittings and Bosses, Pipe Threaded,
Fluid Connection
SAE AS4842/1 (1995; R 2007) Fittings, 37 Degree Flared to Pipe
Threaded, Fluid Connection
SAE AS4843 (1995; R 2007) Fittings, Beaded, Fluid Connection
SAE AS4843/1 (1995; R 2007) Fittings, Beaded to 37 Degree
Flared, Fluid Connection
SAE AS4843/2 (1995; R 2007) Fittings, Beaded to Pipe Threaded,
Fluid Connection
SAE AS4875 (1995; R 2007) Fittings, Straight Threaded Boss,
Fluid Connection
SAE AS4875/1 (1995; R 2007) Fittings, Straight Thread Boss or
Flanged to 37 Degree Flared, Fluid Connection
SAE AS4875/2 (1995; R 2007) Fittings, Flanged to Beaded, Fluid
Connection
SAE AS5756/6 (2013; Rev A; Stabilized (S) 2013) Cable, 3-Phase
Power, Electric Portable, Multiconductor, 90 Degree
C, 600V, Ozone Resistant, Split Phase
SAE AS5877 (2007; Rev A) Aircraft Pressure Refueling Nozzle
SAE AS598 (2012) Aerospace Microscopic Sizing and Counting of
Particulate Contamination for Fluid Power Systems
SAE J1019 (2007) Tests and Procedures for High Temperature
Transmission Oil Hose, Engine Lubricating Oil Hose,
and Hose Assemblies
Page 197
SAE J1165 (1979; R 1986) Reporting Cleanliness Levels of
Hydraulic Fluids
SAE J1508 (2009) Hose Clamp Specifications
SAE J1545 (2005) Instrumental Color Difference Measurement
for Exterior Finishes, Textiles and Colored Trim
SAE J1677 (2009) Tests and Procedures for Steel and Copper
Nickel Tubing
SAE J1995 (2014) Engine Power Test Code – Spark Ignition and
Compression Ignition – Gross Power Rating
SAE J200 (2011) Classification System for Rubber Materials
SAE J429 (2013) Mechanical and Material Requirements for
Externally Threaded Fasteners
SAE J513 (1999) Refrigeration Tube Fittings – General
Specifications
SAE J514 (2012) Hydraulic Tube Fittings
SAE J517 (2013) Hydraulic Hose
SAE J518-1 (2013) Hydraulic Flanged Tube, Pipe, and Hose
Connections, 4-Screw Flange Connection Part 1: 3.5
MPa to 35 MPa (Code 61)
SAE J534 (2008) Lubrication Fittings
SAE J537 (2011) Storage Batteries
SAE J636 (2012) V-Belts and Pulleys
SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS (SMPTE)
SMPTE 170M (2004) Television – Composite Analog Video Signal -
NTSC for Studio Applications
SOLAR RATING AND CERTIFICATION CORPORATION (SRCC)
SRCC CSCWHSR (ongoing online) SRCC Ratings Pages
(http://www.solar-rating.org/ratings/index.html)
SRCC OG-100 (1995) Operating Guidelines for Certifying Solar
Collectors
SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT (SCAQMD)
SCAQMD Rule 1168 (1989; R 2005) Adhesive and Sealant Applications
SOUTHERN CYPRESS MANUFACTURERS ASSOCIATION (SCMA)
SCMA Spec (1986; Supple. No. 1, Aug 1993) Standard
Page 198
Specifications for Grades of Southern Cypress
SOUTHERN PINE INSPECTION BUREAU (SPIB)
SPIB 1003 (2002) Standard Grading Rules for Southern Pine
Lumber
SPRAY POLYURETHANE FOAM ALLIANCE (SPFA)
SPFA AY-104 (1994; R 2008) Spray Polyurethane Foam Systems for
New and Remedial Roofing
STATE OF CALIFORNIA DEPARTMENT OF TRANSPORTATION (CALTRANS)
CTM 526 (2002) Operation of California Profilograph and
Evaluation of Profiles
STATE OF MARYLAND CODE OF MARYLAND REGULATIONS (COMAR)
COMAR 26.13 (1988) Chapters .01- .13, Disposal of Controlled
Hazardous Substances
STATE OF VIRGINIA ADMINISTRATIVE CODE (VAC)
16 VAC 25-20-30 Title 16, Agency 25, Chapter 20, Section 30:
Notification and Permit Fee
16 VAC 25-35 Title 16, Agency 25, Chapter 35: Regulation
Concerning Certified Lead Contractor’s
Notification, Lead Project Permits And Permit Fees
18 VAC 15-30 Title 18, Agency 15, Chapter 30: Virginia
Lead-Based Paint Activities Regulations
9 VAC 20-60 Title 9, Agency 20, Chapter 60: Hazardous Waste
Management Regulations
9 VAC 20-80 Title 9, Agency 20, Chapter 80: Solid Waste
Management Regulations
9 VAC 25-840 Title 9, Agency 25, Chapter 840: Erosion And
Sediment Control Regulations
9 VAC 25-850 Title 9, Agency 25, Chapter 850: Erosion And
Sediment Control And Stormwater Management
Certification Regulations
9 VAC 25-870 Title 9, Agency 25, Chapter 870: Virginia
Stormwater Management Program (Vsmp) Regulation
STEEL DECK INSTITUTE (SDI)
SDI 31 (2007) Design Manual for Composite Decks, Form
Decks, and Roof Decks
SDI DDMO3 (2004; Errata 2006; Add 2006) Diaphragm Design
Manual; 3rd Edition
Page 199
SDI DDP (1987; R 2000) Deck Damage and Penetrations
SDI MOC2 (2006) Manual of Construction with Steel Deck
STEEL DOOR INSTITUTE (SDI/DOOR)
SDI/DOOR 111 (2009) Recommended Selection and Usage Guide for
Standard Steel Doors, Frames and Accessories
SDI/DOOR 113 (2001; R2006) Standard Practice for Determining the
Steady State Thermal Transmittance of Steel Door
and Frame Assemblies
SDI/DOOR A250.11 (2001) Recommended Erection Instructions for Steel
Frames
SDI/DOOR A250.3 (2007; R 2011) Test Procedure and Acceptance
Criteria for Factory Applied Finish Painted Steel
Surfaces for Steel Doors and Frames
SDI/DOOR A250.4 (2011) Test Procedure and Acceptance Criteria for
Physical Endurance for Steel Doors and Hardware
Reinforcing
SDI/DOOR A250.6 (2003; R2009) Recommended Practice for Hardware
Reinforcing on Standard Steel Doors and Frames
SDI/DOOR A250.8 (2003; R2008) Recommended Specifications for
Standard Steel Doors and Frames
STEEL JOIST INSTITUTE (SJI)
SJI LOAD TABLES (2005; Errata 1 2006; Errata 2 2007; Errata 3 2007)
42nd Edition Catalog of Standard Specifications
Load Tables and Weight Tables for Steel Joists and
Joist Girders
SJI MANUAL (2009) 80 Years of Open Web Steel Joist Construction
SJI TD 10 (2003) Technical Digest No. 10 – Design of Fire
Resistive Assemblies with Steel Joists
SJI TD 11 (2007) Technical Digest No. 11 – Design Of Lateral
Load Resisting Frames Using Steel Joists And Joist
Girders
SJI TD 8 (2008) Technical Digest No. 8 – Welding Of Open-Web
Steel Joists And Joist Girders; 2nd Edition
SJI TD 9 (2008) Technical Digest No. 9 – Handling and
Erection of Steel Joists and Joist Girders; 3rd
Edition
STEEL TANK INSTITUTE (STI)
STI 010-50-1000 (2011) Specification and Manual for External
Corrosion Protection of Underground Steel Storage
Page 200
Tanks
STI 020-50-1000 (2010) ACT-100 Specification for External Corrosion
Protection of FRP Composite Steel USTs
STI 700-50-5007 (2010) Installation Instructions for Shop
Fabricated Aboveground Tanks for Flammable,
Combustible Liquids
STI F911 (1998; Reissued 2009) Standard for Diked
Aboveground Storage Tanks
STEEL WINDOW INSTITUTE (SWI)
SWI AGSW (2002) Architect’s Guide to Steel Windows
SWI SWS (2005) Steel Window Specifications
TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY (TAPPI)
TAPPI T403 OM (2010) Bursting Strength of Paper
TAPPI T404 CM (1992) Tensile Breaking Strength and Elongation of
Paper and Paperboard (Using Pendulum-Type Tester)
TAPPI T410 OM (2013) Grammage of Paper and Paperboard (Weight Per
Unit Area)
TAPPI T456 OM (2010) Tensile Breaking Strength of Water-Saturated
Paper and Paperboard (“Wet Tensile Strength”)
TAPPI T487 PM (1999) Fungus Resistance of Paper and Paperboard
TAPPI T803 OM (2010) Puncture Test of Container Board
TELECOMMUNICATIONS INDUSTRY ASSOCIATION (TIA)
EIA/TIA 455-165A (1993) Standard for Mode-Field Diameter Measurement
by Near-Field Scanning Technique
TIA-1152 (2009) Requirements for Field Test Instruments and
Measurements for Balanced Twisted-Pair Cabling
TIA-222 (2005g; Adm 1 2007; Adm 2 2009; R 2012; R 2013)
Structural Standards for Antenna Supporting
Structures and Antennas
TIA-232 (1997f; R 2012) Interface Between Data Terminal
Equipment and Data Circuit-Terminating Equipment
Employing Serial Binary Data Interchange
TIA-329 (2003c) Minimum Standards for Communication
Antennas – Base Station Antennas
TIA-374-A (2002) Land Mobile Selective Signaling Standard
TIA-455-104 (1993a; R 2013) Standard for FOTP-104 Fiber Optic
Page 201
Cable Cyclic Flexing Test
TIA-455-107 (1999a) FOTP-107 Determination of Component
Reflectance or Link/System Return Loss using a Loss
Test Set
TIA-455-13 (1996a; R 2012) FOTP-13 Visual and Mechanical
Inspection of Fiber Optic Components, Devices, and
Assemblies
TIA-455-175 (2003b) FOTP-175 IEC-60793-1-42: Measurement
Methods and Test Procedures – Chromatic Dispersion
TIA-455-177 (2003b) FOTP-177 IEC-60793-1-43: Measurement
Methods and Test Procedures – Numerical Aperture
TIA-455-21 (1988a; R 2012) FOTP-21 – Mating Durability of
Fiber Optic Interconnecting Devices
TIA-455-33 (2005b; R 2013) Optical Cable Tensile Loading and
Bending Test
TIA-455-46A (1990) FOTP-46 Spectral Attenuation Measurement for
Long-Length, Graded-Index Optical Fibers
TIA-455-47B (1992) FOTP-47 Output Far Field Radiation Pattern
Measurement
TIA-455-58 (2001b) FOTP-58 Core Diameter Measurement of
Graded-Index Optical Fibers
TIA-455-78-B (2002) FOTP-78 Optical Fibres – Part 1-40:
Measurement Methods and Test Procedures -
Attenuation
TIA-455-82 (1992b) FOTP-82 Fluid Penetration Test for
Fluid-Blocked Fiber Optic Cable
TIA-455-91 (1986; R 1996) FOTP-91 Fiber Optic Cable Twist-Bend
Test
TIA-472D000 (2007b) Fiber Optic Communications Cable for
Outside Plant Use
TIA-485 (1998a; R 2012) Electrical Characteristics of
Generators and Receivers for Use in Balanced
Digital Multipoint Systems
TIA-492AAAA (2009b) 62.5-um Core Diameter/125-um Cladding
Diameter Class 1a Graded-Index Multimode Optical
Fibers
TIA-492AAAB (2009a) 50-Um Core Diameter/125-Um Cladding
Diameter Class IA Graded-Index Multimode Optical
Fibers
TIA-492CAAA (1998; R 2002) Detail Specification for Class IVa
Page 202
Dispersion-Unshifted Single-Mode Optical Fibers
TIA-492E000 (1996; R 2002) Sectional Specification for Class
IVd Nonzero-Dispersion Single-Mode Optical Fibers
for the 1550 nm Window
TIA-526-14 (2010b) OFSTP-14A Optical Power Loss Measurements
of Installed Multimode Fiber Cable Plant
TIA-526-7 (2002; R 2008) OFSTP-7 Measurement of Optical Power
Loss of Installed Single-Mode Fiber Cable Plant
TIA-568-C.0 (2009; Add 1 2010; Add 2 2012) Generic
Telecommunications Cabling for Customer Premises
TIA-568-C.1 (2009; Add 2 2011; Add 1 2012) Commercial Building
Telecommunications Cabling Standard
TIA-568-C.2 (2009; Errata 2010) Balanced Twisted-Pair
Telecommunications Cabling and Components Standards
TIA-568-C.3 (2008; Add 1 2011) Optical Fiber Cabling Components
Standard
TIA-569 (2012c; Addendum 1 2013; Errata 2013) Commercial
Building Standard for Telecommunications Pathways
and Spaces
TIA-570 (2012c) Residential Telecommunications
Infrastructure Standard
TIA-590 (1997a) Standard for Physical Location and
Protection of Below Ground Fiber Optic Cable Plant
TIA-603 (2010d) Land Mobile FM or PM – Communications
Equipment – Measurement and Performance Standards
TIA-606 (2012b) Administration Standard for the
Telecommunications Infrastructure
TIA-607 (2011b) Generic Telecommunications Bonding and
Grounding (Earthing) for Customer Premises
TIA-758 (2012b) Customer-Owned Outside Plant
Telecommunications Infrastructure Standard
TIA/EIA-455 (1998b) Standard Test Procedure for Fiber Optic
Fibers, Cables, Transducers, Sensors, Connecting
and Terminating Devices, and Other Fiber Optic
Components
TIA/EIA-455-171 (2001a) FOTP-171 – Attenuation by Substitution
Measurement for Short-Length Multimode Graded-Index
and Single-Mode Optical Fiber Cable Assemblies
TIA/EIA-455-204 (2000) Standard for Measurement of Bandwidth on
Multimode Fiber
Page 203
TIA/EIA-455-25 (2002c; R 2013) FOTP-25 Impact Testing of Optical
Fiber Cables
TIA/EIA-455-41 (1993a; R 2013) FOTP-41 Compressive Loading
Resistance of Fiber Optic Cables
TIA/EIA-455-81 (2000b) FOTP-81 Compound Flow (Drip) Test for
Filled Fiber Optic Cable
TIA/EIA-455-88 (2001) FOTP-88 Fiber Optic Cable Bend Test
TIA/EIA-472DAAA (1993) Detail Specification for All Dielectric
Fiber Optic Communications Cable for Outside Plant
Use Containing Class 1a 62.5 Um Core Diameter/125
um Cladding Diameter/250 um Coating Diameter
Fiber(s).
TIA/EIA-4750000-C (1996) Generic Specifications for Fiber Optic
Connectors (ANSI)
TIA/EIA-598 (2005c) Optical Fiber Cable Color Coding
TIA/EIA-604-10 (2002a) FOCIS 10 Fiber Optic Connector
Intermateability Standard – Type LC
TIA/EIA-604-12 (2000) FOCIS 12 Fiber Optic Connector
Intermateability Standard Type MT-RJ
TIA/EIA-604-2 (2004b; R 2014) FOCIS 2 Fiber Optic Connector
Intermateability Standard
TIA/EIA-604-3 (2004b; R 2014) Fiber Optic Connector
Intermateability Standard (FOCIS), Type SC and
SC-APC, FOCIS-3
THE INTERNET ENGINEERING TASK FORCE (IETF)
IETF RFC 4361 (2006) Node-specific Client Identifiers for Dynamic
Host Configuration Protocol Version Four (DHCPv4)
IETF RFC 5246 (2008) The Transport Layer Security (TLS) Protocol
Version 1.2
IETF RFC 5545 (2009) Internet Calendaring and Scheduling Core
Object Specification (iCalendar)
RFC 821 (2001) Simple Mail Transfer Protocol (SMTP)
THE SOCIETY FOR PROTECTIVE COATINGS (SSPC)
CS 23.00/AWS C2.23M/NACE (#210203) Specification for the Application of Thermal
Spray Coatings (Metallizing) of Aluminum, Zinc, and
Their Alloys and Composites for the Corrosion
Protection of Steel
SSPC 7/NACE No.4 (2007; E 2004) Brush-Off Blast Cleaning
Page 204
SSPC AB 1 (2013) Mineral and Slag Abrasives
SSPC AB 2 (1996; E 2004) Cleanliness of Recycled Ferrous
Metallic Abrasive
SSPC AB 3 (2003; E 2004) Ferrous Metallic Abrasive
SSPC Guide 12 (1998; E 2004) Guide for Illumination of Industrial
Painting Projects
SSPC Guide 6 (2004) Guide for Containing Surface Preparation
Debris Generated During Paint Removal Operations
SSPC Guide 7 (2004; E 2004) Guide to the Disposal of
Lead-Contaminated Surface Preparation Debris
SSPC PA 1 (2000; E 2004) Shop, Field, and Maintenance
Painting of Steel
SSPC PA 2 (2012) Measurement of Dry Coating Thickness With
Magnetic Gages
SSPC PA Guide 3 (1982; E 1995) A Guide to Safety in Paint
Application
SSPC PA Guide 5 (2002; E 2004) Guide to Maintenance Coating of
Steel Structures in Atmospheric Service
SSPC PS 10.01 (1982; E 2004) Hot-Applied Coal Tar Enamel Painting
System
SSPC PS 11.01 (1982; E 2004) Black (or Dark Red) Coal Tar Epoxy
Polyamide Painting System
SSPC PS 12.01 (2002; E 2004) One Coat Zinc-Rich Painting System
SSPC PS 13.01 (1982; E 2004) Epoxy Polyamide Painting System
SSPC PS 26.00 (2000; E 2004) Aluminum Pigmented Epoxy Coating
System Materials Specification, Performance-Based
(Type I for use over Blast Cleaned Steel and Type
II for use over Hand Cleaned Steel)
SSPC PS 4.04 (1982; E 2004) Four-Coat White or Colored Vinyl
Painting System (For Fresh Water, Chemical, and
Corrosive Atmospheres)
SSPC PS 9.01 (1982; E 2004) Cold-Applied Asphalt Mastic Painting
System with Extra-Thick Film
SSPC PS Guide 17.00 (1982; E 2004) Guide for Selecting Urethane
Painting Systems
SSPC Paint 104 (1982; E 2004) White or Tinted Alkyd Paint
SSPC Paint 11 (1992; E 2000) Paint Specification No. 11Red Iron
Oxide, Zinc Chromate, Raw Linseed Oil and Alkyd
Page 205
Primer
SSPC Paint 15 (1999; E 2004) Steel Joist Shop Primer
SSPC Paint 16 (2006) Coal Tar Epoxy-Polyamide Black (or Dark Red)
Paint
SSPC Paint 18 (1982; E 2004) Chlorinated Rubber Intermediate Coat
Paint
SSPC Paint 20 (2002; E 2004) Zinc-Rich Primers (Type I,
Inorganic, and Type II, Organic)
SSPC Paint 21 (1982; E 2004) White or Colored Silicone Alkyd
Paint (Type I, High Gloss and Type II, Medium Gloss)
SSPC Paint 22 (1982; E 2004) Paint Specification No. 22
Epoxy-Polyamide Paints (Primer, Intermediate, and
Topcoat)
SSPC Paint 25 (1997; E 2004) Zinc Oxide, Alkyd, Linseed Oil
Primer for Use Over Hand Cleaned Steel, Type I and
Type II
SSPC Paint 27 (1982; E 2004) Basic Zinc Chromate-Vinyl Butyral
Wash Primer
SSPC Paint 28 (1991; E 2004) Water-Borne Epoxy Primer for Steel
Surfaces
SSPC Paint 29 (2002; E 2004) Zinc Dust Sacrificial Primer,
Performance-Based
SSPC Paint 33 (2006) Coal Tar Mastic, Cold-Applied
SSPC Paint 36 (2006) Two-Component Weatherable Aliphatic
Polyurethane Topcoat, Performance-Based
SSPC Paint 38 (2006) Single-Component Moisture-Cure Weatherable
Aliphatic Polyurethane Topcoat, Performance-Based
SSPC Paint 40 (2007) Zinc-Rich Moisture-Cure Polyurethane Primer,
Performance-Based
SSPC Paint 41 (2008) Moisture-Cured Polyurethane Primer or
Intermediate Coat, Micaceous Iron Oxide Reinforced,
Performance-Based
SSPC Painting Manual (2002) Good Painting Practice, Steel Structures
Painting Manual, Volume 1
SSPC QP 1 (1998; E 2004) Standard Procedure for Evaluating
Painting Contractors (Field Application to Complex
Industrial Structures)
SSPC QP 2 (2009) Standard Procedure for the Qualification of
Painting Contractors (Field Removal of Hazardous
Page 206
Coatings from Complex Structures)
SSPC QP 3 (2010) Standard Procedure for Evaluating
Qualifications of Shop Painting Applicators
SSPC QP 5 (1999; E 2004) Standard Procedure for Evaluating
the Qualifications of Coating and Lining Inspection
Companies
SSPC QS 1 (2004) Standard Procedure for Evaluating a
Contractor’s Advanced Quality Management System
SSPC SP 1 (1982; E 2004) Solvent Cleaning
SSPC SP 10/NACE No. 2 (2007) Near-White Blast Cleaning
SSPC SP 11 (2012) Power Tool Cleaning to Bare Metal
SSPC SP 12/NACE No.5 (2002) Surface Preparation and Cleaning of Metals
by Waterjetting Prior to Recoating
SSPC SP 2 (1982; E 2000; E 2004) Hand Tool Cleaning
SSPC SP 3 (1982; E 2004) Power Tool Cleaning
SSPC SP 5/NACE No. 1 (2007) White Metal Blast Cleaning
SSPC SP 6/NACE No.3 (2007) Commercial Blast Cleaning
SSPC SP 8 (1982; E 2004) Pickling
SSPC SP COM (2004) Surface Preparation Commentary for Steel and
Concrete Substrates
SSPC SSPM (2010) SSPC Painting Manual, Volume 2, Systems and
Specifications
SSPC VIS 1 (2002; E 2004) Guide and Reference Photographs for
Steel Surfaces Prepared by Dry Abrasive Blast
Cleaning
SSPC VIS 3 (2004) Guide and Reference Photographs for Steel
Surfaces Prepared by Hand and Power Tool Cleaning
SSPC VIS 4/NACE VIS 7 (1998; E 2000; E 2004) Guide and Reference
Photographs for Steel Surfaces Prepared by
Waterjetting
SSPC-TU 2/NACE 6G197 (1997) Design, Installation, and Maintenance of
Coating Systems for Concrete Used in Secondary
Containment
THE SOCIETY OF CABLE TELECOMMUNICATIONS ENGINEERS (SCTE)
ANSI/SCTE 77 (2013) Specification for Underground Enclosure
Integrity
Page 207
THE WOOLMARK COMPANY (WBI)
Woolmark (1964) Certification for Use of 100 Percent Wool
TILE COUNCIL OF NORTH AMERICA (TCNA)
TCNA Hdbk (2013) Handbook for Ceramic, Glass, and Stone Tile
Installation
TREE CARE INDUSTRY ASSOCIATION (TCIA)
TCIA A300P1 (2008) ANSI A300 Part1: Tree Care Operations -
Trees, Shrubs and Other Woody Plant Maintenance
Standard Practices – Pruning
TCIA Z133.1 (2006) American National Standard for
Arboricultural Operations – Pruning, Repairing,
Maintaining, and Removing Trees, and Cutting Brush
- Safety Requirements
TRIDIUM, INC (TRIDIUM)
Niagara Framework (2012) NiagaraAX User’s Guide
Tridium Open NiCS (2005) Understanding the NiagaraAX Compatibility
Statement (NiCS)
TRUSS PLATE INSTITUTE (TPI)
TPI 1 (2007; R 2006) National Design Standard for Metal
Plate Connected Wood Truss Construction; Commentary
and Appendices
TPI HIB (1991) Commentary and Recommendations for Handling,
Installing and Bracing Metal Plate Connected Wood
Trusses
TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION (TEMA)
TEMA Stds (2007) Standards of the Tubular Exchange
Manufacturers Association (TEMA)
TURFGRASS PRODUCERS INTERNATIONAL (TPI)
TPI GSS (1995) Guideline Specifications to Turfgrass Sodding
U.S. AIR FORCE (USAF)
AF 48-1 (2005, Change 2009) Respiratory Protection Program
AF 91-501 (2004) Air Force Consolidated Occupational Safety
Standard
AF ETL 11-1 (2011) Civil Engineer Industrial Control System
Information Assurance Compliance
AFI 32-1053 (2009) Integrated Pest Management Program
Page 208
AFI 32-1065 (1998) Grounding Systems
AFI 91-202 (1998; Change 2010) US Air Force Mishap Prevention
Program
AFOSHSTD 91-38 (1997) Hydrocarbon Fuels – General
U.S. ARMY (DA)
DA AR 200-1 (2007) Environmental Protection and Enhancement
DA AR 25-2 (2007; RAR 2009) Information Assurance
DA AR 55-80 (2003) DOD Transportation Engineering Program
DA PAM 385-64 (2011) Ammunition and Explosives Safety Standards
U.S. ARMY CENTER FOR HEALTH PROMOTION AND PREVENTIVE MEDICINE
(USACHPPM)
USACHPPM Protocol (1993) Sampling Protocol Building Demolition Debris
and Buildings Painted with Lead-Based Paint
U.S. ARMY CORPS OF ENGINEERS (USACE)
CED TR GL-85-3 (1985) Geotechnical Descriptions of Rock and Rock
Masses
CERL TR 99/104 (1999) Greaseless Bushings for Hydropower
Applications: Program, Testing, and Results
CERL Tech Rep FM-95/05 (1994) Field Evaluation of Cathodic Protection
Systems Using Ceramic-Coated Anodes for Lock and
Dam Gates
COE CRD-C 100 (1975) Method of Sampling Concrete Aggregate and
Aggregate Sources, and Selection of Material for
Testing
COE CRD-C 104 (1980) Method of Calculation of the Fineness
Modulus of Aggregate
COE CRD-C 112 (1969) Method of Test for Surface Moisture in
Aggregate by Water Displacement
COE CRD-C 114 (1997) Test Method for Soundness of Aggregates by
Freezing and Thawing of Concrete Specimens
COE CRD-C 130 (2001) Standard Recommended Practice for Estimating
Scratch Hardness of Coarse Aggregate Particles
COE CRD-C 143 (1962) Specifications for Meters for Automatic
Indication of Moisture in Fine Aggregate
COE CRD-C 144 (1992) Standard Test Method for Resistance of Rock
to Freezing and Thawing
Page 209
COE CRD-C 148 (1969) Method of Testing Stone for Expansive
Breakdown on Soaking in Ethylene Glycol
COE CRD-C 164 (1992) Standard Test Method for Direct Tensile
Strength of Cylindrical Concrete or Mortar Specimens
COE CRD-C 169 (1997) Standard Test Method for Resistance of Rock
to Wetting and Drying
COE CRD-C 171 (1995) Standard Test Method for Determining
Percentage of Crushed Particles in Aggregate
COE CRD-C 300 (1990) Specifications for Membrane-Forming
Compounds for Curing Concrete
COE CRD-C 39 (1981) Test Method for Coefficient of Linear
Thermal Expansion of Concrete
COE CRD-C 400 (1963) Requirements for Water for Use in Mixing or
Curing Concrete
COE CRD-C 513 (1974) Corps of Engineers Specifications for Rubber
Waterstops
COE CRD-C 521 (1981) Standard Test Method for Frequency and
Amplitude of Vibrators for Concrete
COE CRD-C 525 (1989) Corps of Engineers Test Method for
Evaluation of Hot-Applied Joint Sealants for
Bubbling Due to Heating
COE CRD-C 53 (2001) Test Method for Consistency of No-Slump
Concrete Using the Modified Vebe Apparatus
COE CRD-C 548 (1988) Standard Specification for Jet-Fuel and
Heat-Resistant Preformed Polychloroprene
Elastomeric Joint Seals for Rigid Pavements
COE CRD-C 55 (1992) Test Method for Within-Batch Uniformity of
Freshly Mixed Concrete
COE CRD-C 572 (1974) Corps of Engineers Specifications for
Polyvinylchloride Waterstops
COE CRD-C 61 (1989A) Test Method for Determining the Resistance
of Freshly Mixed Concrete to Washing Out in Water
COE CRD-C 649 (1995) Standard Test Method for Unit Weight,
Marshall Stability, and Flow of Bituminous Mixtures
COE CRD-C 650 (1995) Standard Method for Density and Percent
Voids of Compacted Bituminous Paving Mixtures
COE CRD-C 662 (2009) Determining the Potential Alkali-Silica
Reactivity of Combinations of Cementitious
Materials, Lithium Nitrate Admixture and Aggregate
(Accelerated Mortar-Bar Method)
Page 210
COE CRD-C 94 (1995) Corps of Engineers Specification for Surface
Retarders
EM 1110-1-1906 (1996) Engineering and Design — Soil Sampling
EM 1110-1-3500 (1995) Engineering and Design — Chemical Grouting
EM 1110-1-4006 (1998) Engineering and Design — Removal of
Underground Storage Tanks (USTs)
EM 1110-2-1424 (1999; Change 1-2006; Change 2-2007) Engineering
and Design — Lubricants and Hydraulic Fluids
EM 1110-2-1601 (1991; 1994 Change 1) Engineering and Design –
Hydraulic Design of Flood Control Channels
EM 1110-2-1906 (1986) Laboratory Soils Testing
EM 1110-2-1913 (2000) Engineering and Design; Design and
Construction of Levees
EM 1110-2-2704 (2004) Engineering and Design — Cathodic
Protection Systems for Civil Works Structures
EM 1110-2-2901 (1997) Engineering and Design — Tunnels and Shafts
in Rock
EM 1110-2-3506 (1984) Engineering and Design — Grouting Technology
EM 200-1-1 (1994) Environmental Quality — Validation of
Analytical Chemistry Laboratories
EM 200-1-3 (2001) Engineering and Design — Requirements for
the Preparation of Sampling and Analysis Plans
EM 200-1-6 (1997) Environmental Quality — Chemical Quality
Assurance for HTRW Projects
EM 200-1-7 (2001) Environmental Quality – Performance
Evaluation (PE) Program
EM 385-1-1 (2008; Errata 1-2010; Changes 1-3 2010; Changes 4-6
2011; Change 7 2012) Safety and Health Requirements
Manual
EP 1110-1-11 (1992; Change 1 1997) Engineering and Design –
Asbestos Abatement Guideline Detail Sheets
EP 1110-1-19 (2001) A Guide to Preparing and Reviewing Remedial
Action Reports of Cost and Performance
EP 310-1-6a (2006) Sign Standards Manual, VOL 1
EP 310-1-6b (2006) Sign Standards Manual, VOL 2, Appendices
EP 415-1-266 (2000) Resident Engineer Management Guide (REMG)
for Hazardous, Toxic, and Radioactive Waste (HTRW)
Page 211
Projects
EP-1110-1-8 (2009) Construction Equipment Ownership and
Operating Expense Schedule
ER 1-1-11 (1995) Administration — Progress, Schedules, and
Network Analysis Systems
ER 1110-1-12 (2006; Change 1) Engineering and Design — Quality
Management
ER 1110-1-263 (1998) Engineering and Design — Chemical Data
Quality Management for Hazardous, Toxic,
Radioactive Waste Remedial Activities
ER 1110-3-1301 (1999) Engineering and Design — Cost Engineering
Policy Requirements for Hazardous, Toxic
Radioactive Waste (HTRW) Cost Engineering
ER 385-1-95 (2007; Errata 2007) Safety — Safety and Health
Requirements for Munitions and Explosives of
Concern (MEC) Operations
PWTB 420-49-5 (1998) Industrial Water Treatment Procedures
TR-06-X (2006; Supplement 2009) A/E/C (Architectural,
Engineering, and Construction) CADD Standard -
Release 3.0
TR-EL-97-8 (1997) Bioengineering for Streambank Erosion
Control; Report 1, Guidelines
WETLANDS DELINEATION MANU(A1L987) Corps of Engineers Wetlands Delineation
Manual
U.S. ARMY ENVIRONMENTAL CENTER (USAEC)
USAEC CETHA-TS-CR-93043 (1993) Windrow Composting Demonstration for
Explosives-Contaminated Soils at the Umatilla Depot
Activity (NTIS PB95-200119)
USAEC SFIM-AEC-ET-CR-9618(41996) Cost Report: Windrow Composting to Treat
Explosives-Contaminated Soils at Umatilla Army
Depot Activity (UMDA) (NTIS AD-A318001)
USAEC SFIM-AEC-ET-CR-9705(31997) Federal Remediation Technologies Screening
Matrix and Reference Guide, Third Edition (NTIS
PB98-108590)
U.S. Code (USC)
10 USC 6011 Navy Regulations
8 USC 1101 Definitions
USC Title 42 The Public Health and Welfare
Page 212
U.S. DEFENSE INTELLIGENCE AGENCY (DIA)
DIA DCID 6/9 (2002) Director of Central Intelligence Directive
No. 6/9
U.S. DEFENSE LOGISTICS AGENCY (DLA)
DLA 4145.25 (June 2000) Storage and Handling of Liquefied and
Gaseous Compressed Gases and Their Full and Empty
Cylinders
DLA J4 Handbook (Part IV) Federal Supply Class Assignments (Numeric
and Alphabetic Listing)
DLA Lock DOD Lock Program; http://www.dscp.dla.mil/gi/locks/
U.S. DEPARTMENT OF AGRICULTURE (USDA)
AMS Seed Act (1940; R 1988; R 1998) Federal Seed Act
Biomass R&D Act (2000) Biomass Research and Development Act
DOA SSIR 42 (1996) Soil Survey Investigation Report No. 42,
Soil Survey Laboratory Methods Manual, Version 3.0
RUS 1755 Telecommunications Standards and Specifications for
Materials, Equipment and Construction
RUS 202-1 (2004) List of Materials Acceptable for Use on
Systems of RUS Electrification Borrowers
RUS Bull 1728F-700 (2011) Specification for Wood Poles, Stubs, and
Anchor Logs
RUS Bull 1728H-701 (1993) Wood Crossarms (Solid and Laminated),
Transmission Timbers and Pole Keys
RUS Bull 1751F-205 (1987) Filled Telephone Cables (PE-39)
RUS Bull 1751F-630 (1996) Design of Aerial Plant
RUS Bull 1751F-640 (1995) Design of Buried Plant, Physical
Considerations
RUS Bull 1751F-643 (2002) Underground Plant Design
RUS Bull 1751F-644 (2002) Underground Plant Construction
RUS Bull 1751F-815 (1979) Electrical Protection of Outside Plant
RUS Bull 1753F-201 (1997) Acceptance Tests of Telecommunications Plant
(PC-4)
RUS Bull 1753F-401 (1995) Splicing Copper and Fiber Optic Cables (PC-2)
RUS Bull 1753F-601 (1994) Specifications for Filled Fiber Optic Cables
Page 213
(PE-90)
RUS Bull 345-50 (1979) Trunk Carrier Systems (PE-60)
RUS Bull 345-65 (1985) Shield Bonding Connectors (PE-65)
RUS Bull 345-67 (1998) REA Specification for Filled Telephone
Cables, PE-39
RUS Bull 345-72 (1985) Filled Splice Closures (PE-74)
RUS Bull 345-83 (1979; Rev Oct 1982) Gas Tube Surge Arrestors
(PE-80)
U.S. Farm Bill (2002) U.S. Farm Bill of May 2002
U.S. DEPARTMENT OF COMMERCE (DOC)
DOC/NIST PS1 (1995) Construction and Industrial Plywood with
Typical APA Trademarks
DOC/NIST PS51 (1971) Hardwood and Decorative Plywood
DOC/NIST PS56 (1973) Structural Glued Laminated Timber
DOC/NIST PS58 (1973) Basic Hardboard (ANSI A135.4)
U.S. DEPARTMENT OF DEFENSE (DOD)
DOD 4000.25-1-M (2006) MILSTRIP – Military Standard Requisitioning
and Issue Procedures
DOD 4500.9-R (2007) Defense Transportation Regulation – Part II:
Cargo Movement
DOD 5100.76-M (2012) Physical Security of Sensitive Conventional
Arms, Ammunition, and Explosives
DOD 5220.22-M (2013) National Industrial Security Program
Operating Manual (NISPOM)
DOD-G-24508 (1977; Rev A; Am 4 1998) Grease, High Performance,
Multipurpose (Metric)
MIL-A-22262 (1993; Rev B; Am 2 1996) Abrasive Blasting Media
Ship Hull Blast Cleaning
MIL-A-24179 (1969; Rev A; Am 2 1980; Notice 1 1987) Adhesive,
Flexible Unicellular-Plastic Thermal Insulation
MIL-A-25896 (1983; Rev E; Notice 1 1989; Notice 3 2003)
Adapter, Pressure Fuel Servicing, Nominal 2.5 inch
diameter
MIL-A-3316 (1987; Rev C; Am 2 1990) Adhesives, Fire-Resistant,
Thermal Insulation
Page 214
MIL-A-8625 (1993; Rev F; Am 1 2003) Anodic Coatings, for
Aluminum and Aluminum Alloys
MIL-B-18897 (Rev F; CANC Notice 1) Boilers, Steam and Hot
Water, Watertube (Straight Bare and Finned Tube),
Cast Iron and Firebox, Packaged Type (40,000 to
35,000,000 BTU/HR Thermal Output Capacity)
MIL-C-15726 (1988; Rev F; Am 1 1991) Copper-Nickel Alloy,
Sheet, Plate, Strip, Bar, Rod, and Wire
MIL-C-18480 (1982; Rev B; Notice 2 2009) Coating Compound,
Bituminous, Solvent, Coal-Tar Base
MIL-C-24368/1 (1987; Rev B) Connector Assemblies; Plug, Power
Transfer, Shore to Ship and Ship to Ship, 500
Volts, 500 Amperes, 60 Hertz, Symbol Number 1160
MIL-C-24368/2 (1987; Rev B) Connector Assemblies; Receptacle, and
Receptacle-Cabled, Power Transfer, Shore to Ship
and Ship to Ship, 500 Volts, 500 Amperes, 60 Hertz,
Symbol Number 1161
MIL-C-83260 (1972; Rev A; Notice 1 1996) Coupler, Hydrant Valve
GRU-16/e
MIL-D-16791 (1990; Rev G, Am 1 1993) Detergents, General
Purpose (Liquid, Non-Ionic)
MIL-DTL-12276 (2006; Rev E; Notice 1 2011) Varnish, Phenolic,
Baking
MIL-DTL-15024 (1997; Rev F) Plates, Tags and Bands for
Identification of Equipment, General Specification
for
MIL-DTL-16884 (2012; Rev M) Fuel, Naval Distillate
MIL-DTL-17813 (2009; Rev H; Supp 1 2009; Notice 1 2013) Expansion
Joints, Pipe, Metallic Bellows, General
Specification for
MIL-DTL-24441 (2009; Rev D) Paint, Epoxy-Polyamide, General
Specification for
MIL-DTL-24441/19 (2009; Rev C) Paint, Epoxy-Polyamide, Zinc Primer,
Formula 159, Type III
MIL-DTL-24441/20 (2009; Rev B) Paint, Epoxy-Polyamide, Green Primer,
Formula 150, Type III
MIL-DTL-24441/22 (2009; Rev B) Paint, Epoxy-Polyamide, White Formula
152, Type III
MIL-DTL-24441/29 (2009; Rev B) Paint, Epoxy-Polyamide, Green Primer,
Formula 150, Type IV
Page 215
MIL-DTL-24441/31 (2009; Rev B) Paint, Epoxy-Polyamide, White,
Formula 152, Type IV
MIL-DTL-24643/3 (2009; Rev E) Cable, Electrical, -20 Degrees C to
+90 Degrees, 600 Volts, Types LSSHOF, LSDHOF,
LSTHOF, and LSFHOF
MIL-DTL-24788 (2008; Rev A) Coupling Assembly, Semi-Dry-Break,
Quick-Disconnect Fuel With or Without Continuity
Switch
MIL-DTL-28840 (2010; Rev D; Supp 1 2013) Connectors, Electrical,
Circular Threaded, High Density, High Shock,
Shipboard, Class D, General Specification
MIL-DTL-28840/12 (2009; Rev F) Connectors, Electrical, Screw
Threads, High Density, High Shock, Shipboard, Crimp
Contacts Receptacle, Box Mounting, Classes D, DS,
P, T and Z
MIL-DTL-29229 (Rev B, Notice 1) Switches and Frogs, Track,
Fabricated, for Portal Cranes
MIL-DTL-32101 (2012 – Controlled Distribution Document) Carbon,
Activated, Impregnated,
Copper-silver-Zinc-Molybdenum-Triethylenediamine
(ASZM-TEDA) – Controlled Distribution Document
MIL-DTL-38219 (1998; Rev D) Turbine Fuel, Low Volatility, JP-7
MIL-DTL-5541 (2006; Rev F) Chemical Conversion Coatings on
Aluminum and Aluminum Alloys
MIL-DTL-5624 (2013; Rev V) Turbine Fuel, Aviation, Grades JP-4
and JP-5
MIL-DTL-5904 (2010; Rev E) Light, Runway Marker, Elevated, Type
C-1
MIL-DTL-7830 (2007; Rev E; Notice 1) Light Assembly, Marker,
Aircraft Obstruction
MIL-DTL-82020 (1997; Rev C; Notice 1; CANC Notice 2) Switches and
Frogs, Track, Cast Manganese Steel, for Portal
Cranes
MIL-DTL-83133 (2011; Rev H; Am 2 2013) Turbine Fuels, Aviation,
Kerosene Type, JP-8 (NATO F-34), NATO F-35 and JP-8
+ 100 (NATO F-37)
MIL-DTL-83413 (2012; Rev C) Connectors and Assemblies,
Electrical, Aircraft Grounding, General
Specification for
MIL-DTL-83413/4 (2013; Rev D) Connectors and Assemblies,
Electrical, Aircraft Grounding: Plugs, for Types I
and II Grounding Assemblies
Page 216
MIL-DTL-83413/7 (2012; Rev E; Am 1 2013) Connectors and Assemblies,
Electrical, Aircraft Grounding Clamp Connector for
Types I and III Grounding Assemblies, Clip,
Electrical
MIL-E-17814 (1992; Rev F; CANC Notice 1) Expansion Joints,
Pipe, Slip-Type, Packed
MIL-F-18280 (1995; Rev F; Supp 1; CANC Notice 1) Fittings,
Flareless Tube, Fluid Connection
MIL-F-24385 (1992; Rev F; Am 1 1994) Fire Extinguishing Agent,
Aqueous Film Forming Foam (AFFF) Liquid
Concentrate, for Fresh and Seawater
MIL-F-29177 (1985; Rev A; CANC Notice 1) Filter, Air-Extended
Area, Initial Installation
MIL-H-15021 (1950; Rev A; Am 2 1959) Hook, Snap Bolt,
Swivel-Eye, and Rings
MIL-HDBK 232 (1987; Rev A; Notice 1 1988; Notice 2 2000)
Red/Black Engineering – Installation Guidelines
MIL-HDBK-17-3 (2002; Rev F; CANC Notice 1) Composite Materials
Handbook, Vol. 3, Polymer Matrix Composites
Material Usage, Design, and Analysis
MIL-HDBK-419 (1987; Rev A) Grounding, Bonding, and Shielding for
Electronic Equipments and Facilities Volumes 1 of 2
Basic Theory
MIL-HDBK-831 (2013; Rev A) Preparation of Test Reports
MIL-I-1361 (1985; Rev C; Notice 1 1991) Instrument
Auxiliaries, Electrical Measuring: Shunts,
Resistors and Transformers
MIL-I-24092 (1993; Rev D; Supp 1993) Insulating Varnishes and
Solventless Resins for Applications by the Dip
Process
MIL-I-24768/14 (1992) Insulation, Plastic, Laminated,
Thermosetting, Cotton-Fabric-Base, Phenolic-Resin
(FBG)
MIL-I-631 (1961; Rev D; Am 6 1987) Insulation, Electrical,
Synthetic-Resin Composition, Nonrigid
MIL-L-26764 (1970; Rev B) Light, Marker, Airport Approach, High
Intensity, Type MB-2
MIL-L-26990 (1967; Rev B; Am 2 1978) Light, Marker, Airport
Approach, High Intensity, Type MB-1
MIL-L-29575 (1989) Light, Wave-Off, Flashing,
Capacitance-Discharge
Page 217
MIL-L-7158 (1969; Rev E; Notice 1 1991) Light, Beacon,
Rotating, 24-Inch
MIL-P-21035 (1991; Rev B; Notice 2 2003) Paint, High Zinc Dust
Content, Galvanizing Repair (Metric)
MIL-P-8944 (1970; Rev A; Am 1 1983; Notice 2) Panel, Airport
Lighting Control, General Specification for
MIL-PRF-13789 (1999; Rev E; Notice 1 2008) Strainers, Sediment:
Pipeline, Basket Type
MIL-PRF-15733 (2010; Rev J, Supp 1 2010) Filters and Capacitors,
Radio Frequency Interference, General Specification
for
MIL-PRF-17331 (2013; Rev K) Lubricating Oil, Steam Turbine and
Gear, Moderate Service
MIL-PRF-19565 (1988; Rev C) Coating Compounds, Thermal
Insulation, Fire- and Water-Resistant, Vapor-Barrier
MIL-PRF-22750 (2011; Rev G) Coating, Epoxy, High Solids
MIL-PRF-23236 (2009; Rev D) Coating Systems for Ship Structures
MIL-PRF-23377 (2012; Rev K) Primer Coatings: Epoxy, High Solids
MIL-PRF-24021 (1998; Rev K) Electric Power Monitors, External
Aircraft
MIL-PRF-24635 (2009; Rev E) Coating Systems, Weather Resistant,
Exterior Use
MIL-PRF-25567 (1998; Rev E; Notice 1 2005; Notice 2 2010) Leak
Detection Compound, Oxygen Systems (Metric)
MIL-PRF-32016 (2002; Rev A) Cell, Gas Phase, Adsorber
MIL-PRF-370 (2002; Rev J) Hose And Hose Assemblies,
Nonmetallic: Elastomeric, Liquid Fuel
MIL-PRF-4556 (1998; Rev F; Am 1 1999; CANC Notice 1 2011)
Coating Kit, Epoxy, for Interior of Steel Fuel Tanks
MIL-PRF-52747 (1996; Rev F) Nozzle Assembly, Closed-Circuit
Refueling, Standard and Arctic Service
MIL-PRF-52748 (1995; Rev F; Notice 1 2004; Notice 2 2010) Nozzle,
Adapter, Closed-Circuit to Gravity Fill, Standard
and Arctic Service
MIL-PRF-680 (2010; Rev C) Degreasing Solvent
MIL-PRF-85285 (2012; Rev E) Coating: Polyurethane Aircraft and
Support Equipment
Page 218
MIL-PRF-907 (2004; Rev F) Antiseize Thread Compound, High
Temperature
MIL-R-24243 (1994; Rev C, Supp 1 1994; Am 1 1994) Rivets,
Blind, Nonstructural, Retained Mandrel, General
specification for
MIL-R-43900 (1985; Rev B; Notice 1; CANC Notice 2)
Refrigerators, Freezers, Prefabricated, Mechanical,
Commercial, Walk-In
MIL-STD-101 (1970; Rev B) Color Code for Pipelines & for
Compressed Gas Cylinders
MIL-STD-108 (1966; Rev E; Am 1 1985; Notice 2 1990)
Definitions of and Basic Requirements for
Enclosures for Electric and Electronic Equipment
MIL-STD-129 (2014; Rev R) Military Marking for Shipment and
Storage
MIL-STD-130 (2007; Rev N; Change 1 2012) Identification Marking
of U.S. Military Property
MIL-STD-1399-300 (2008; Rev B) Electric Power, Alternating Current
MIL-STD-161 (2005; Rev G; Notice 1 2010) Identification Methods
for Bulk Petroleum Products Systems Including
Hydrocarbon Missile Fuels
MIL-STD-1691 (1994; Rev F) Construction and Material Schedule
for Military Medical and Dental Facilities
MIL-STD-1699 (1992; Rev B) Nondestructive Evaluation of Butt
Welds in Crane and Railroad Rails
MIL-STD-188-124 (1998; Rev B; Notice 2 1998; Notice 3 2000; Notice
4 2013) Grounding, Bonding and Shielding for Common
Long Haul/Tactical Communications Systems,
Including Ground Based Communications – Electronics
Facilities and Equipments
MIL-STD-188-125-1 (1998; Basic; Notice 1 2005) High-Altitude
Electromagnetic Pulse (HEMP) Protection for
Ground-Based C41 Facilities Performing Critical,
Time-Urgent Missions, Part I Fixed Facilities
MIL-STD-188-176 (1996; Notice 1) Standardized Profile for
Asynchronous Transfer Mode (ATM)
MIL-STD-202 (2002; Rev G; Notice 1 2003; Notice 2 2013)
Electronic and Electrical Component Parts
MIL-STD-2042 (2002; Rev B; Notice 1 2007) Fiber Optic Cable
Topology Installation Standard Methods for Naval
Ships
Page 219
MIL-STD-220 (2009; Rev C) Method of Insertion Loss Measurement
MIL-STD-282 (2012; Rev A; Change 1 – Controlled Distribution
Document) Filter Units, Protective Clothing,
Gas-Mask Components and Related Products:
Performance-Test Methods
MIL-STD-461 (2007; Rev F) Requirements for the Control of
Electromagnetic Interference Characteristics of
Subsystems and Equipment
MIL-STD-704 (2004; Rev F; Notice 1 2008; Notice 2 2013)
Aircraft Electric Power Characteristics
MIL-STD-810 (2008; Rev G) Environmental Engineering
Considerations and Laboratory Tests
MIL-STD-889 (1976; Rev B; Notice 2 1988; Notice 3 1993)
Dissimilar Metals
MIL-T-152 (1961; Rev B; Am 2 1966; Notice 2 2000; Notice 3
2006; Notice 4 2011) Treatment, Moisture and Fungus
Resistant, of Communications, Electronic, and
Associated Electrical Equipment
MIL-T-16420 (1978; Rev K; Am 1 1988) Tube, Copper-Nickel Alloy,
Seamless and Welded (Copper Alloy Numbers 715 and
706)
MIL-T-19646 (1990; Rev A) Thermometer, Gas Actuated, Remote
Reading
MIL-T-27535 (1964; Rev A; Supp 1 1964; Am 2 1965; Notice 1
1993; Notice 3 1999) Transformer, Power, Isolation,
Series Circuit, Airport Lighting, General
Specification for
MIL-T-81772 (1986; Rev B; Am 1 1991) Thinner, Aircraft Coating
MIL-V-12003 (1980; Rev F; Am 1; CANC Notice 1) Valves, Plug,
Cast-Iron or Steel, Manually Operated
MIL-V-173 (1969; Rev C; Am 2; CANC Notice 3) Varnish,
Moisture and Fungus Resistant (For Treatment of
Communications, Electronic, and Associated
Equipment)
MIL-V-18436 (1987; Rev F) Valves, Check, Bronze, Cast Iron, and
Steel Body
MS 17814 (1972; Rev C; Am 1 2002; Notice 1 2006; Notice 2
2012) Coupling, Frangible, Aviation Ground Lights
UFC 1-200-01 (2013) General Building Requirements
UFC 1-300-08 (2009, with Change 2) Criteria for Transfer and
Acceptance of DoD Real Property
Page 220
UFC 3-230-03 (2012) Water Treatment
UFC 3-250-01FA (2004) Pavement Design for Roads, Streets, Walks,
and Open Storage Areas
UFC 3-301-01 (2013) Structural Engineering
UFC 3-310-04 (2013) Seismic Design for Buildings
UFC 3-460-03 (2003) O&M: Maintenance of Petroleum Systems
UFC 3-601-02 (2010) Operations and Maintenance: Inspection,
Testing, and Maintenance of Fire Protection Systems
UFC 4-010-01 (2012) DoD Minimum Antiterrorism Standards for
Buildings
UFC 4-021-01 (2008; Change 1 2010) Design and O&M: Mass
Notification Systems
U.S. DEPARTMENT OF ENERGY (DOE)
DOE CE-2 (2000) How to Buy an Energy-Efficient Water-Cooled
Electric Chiller
DOE CE-3 (2001) How to Buy an Energy-Efficient Commercial
Unitary Air Conditioner
DOE CE-6 (2000) How to Buy an Energy-Efficient Air-Cooled
Electric Chiller
DOE CI-1 (2001) How to Buy a Premium Energy-Efficient
Electric Motor
DOE HDBK-1169 (2003) Nuclear Air Cleaning Handbook
DOE LT-4 (2000) How to Buy Energy-Efficient Exit Signs
DOE RA-1 (2000) How to Buy an Energy-Efficient Room Air
Conditioner
ISWG Guiding Principles (2008) High Performance and Sustainable Buildings
Guidance
U.S. DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT (HUD)
HUD 6780 (1995; Errata Aug 1996;Rev Ch. 7 – 1997) Guidelines
for the Evaluation and Control of Lead-Based Paint
Hazards in Housing
U.S. DEPARTMENT OF STATE (SD)
SD Std-01.01 (1993 Rev G Amended; Inx Certified Prod/Mfg)
Certification Standard Forced Entry and Ballistic
Resistance of Structural Systems
SD-STD-02.01 (2003; Rev A) Specification For Vehicle Crash Test
Page 221
of Perimeter Barriers and Gates
U.S. DEPARTMENT OF TRANSPORTATION (DOT)
DOT 4500.9R Defense Transportation Regulation, Part 2, Cargo
Movement, Chapter 204, Hazardous Material
U.S. ENVIRONMENTAL PROTECTION AGENCY (EPA)
7 USC Section 136 Federal Insecticide, Fungicide, and Rodenticide Act
EPA 340/1-90/018 (1990) Asbestos/NESHAP Regulated Asbestos
Containing Materials Guidance
EPA 402-C-01-001 (2001) IAQ Building Education and Assessment Tool
(I-BEAM)
EPA 402-F-91-102 (1991) Building Air Quality: A Guide for Building
Owners and Facility Managers
EPA 402-R-92-004 (1992) Indoor Radon and Radon Decay Product
Measurement Device Protocols
EPA 402-R-92-014 (1993) Radon Measurement in Schools
EPA 402-R-93-003 (1993) Protocols for Radon and Radon Decay Product
Measurements in Homes
EPA 402-R-93-078 (1993; R 1994) Radon Mitigation Standards
EPA 450/4-80/023R (1985) Guideline for Determination of Good
Engineering Practice Stack Height (Technical
Support Document for the Stack Height Regulations)
EPA 530-R-97-007 (1997) Best Management Practices (BMPs) for Soils
Treatment Technologies;, Suggested Operational
Guidelines to Prevent Cross-Media Transfer of
Contaminants During Cleanup Activities
EPA 530/F-93/004 (1993; Rev O; Updates I, II, IIA, IIB, and III)
Test Methods for Evaluating Solid Waste (Vol IA,
IB, IC, and II) (SW-846)
EPA 540/2-91/020A (1991) Guide for Conducting Treatability Studies
under CERCLA: Soil Washing: Interim Guidance
EPA 540/R 99-008 (1999) USEPA Contract Laboratory Program National
Functional Guidelines for Organic Data Review
EPA 540/R-92/071a (1992) A Guide For Conducting Treatability Studies
Under CERCLA, Final Report
EPA 542-B-98-007 (1998) Guide to Documenting and Managing Cost and
Performance Information for Remediation Projects
EPA 560/5-85-024 (1985) Guidance for Controlling Asbestos-Containing
Materials in Buildings (Purple Book)
Page 222
EPA 560/5-86-017 (1986) Field Manual for Grid Sampling of PCB Spill
Sites to Verify Cleanup
EPA 560/6-82-002 (1982) Guidelines and Support Documents for
Environmental Effects Testing
EPA 600-4-89-034 (1990) Handbook of Suggested Practices for the
Design and Installation of Groundwater Monitoring
Wells
EPA 600/4-79/020 (1983) Methods for Chemical Analysis of Water and
Wastes
EPA 600/4-90/027F (1993) Methods for Measuring the Acute Toxicity of
Effluents and Receiving Waters to Freshwater and
Marine Organisms
EPA 600/R-96/084 (2000) Guidance for Data Quality Assessment:
Practical Methods for Data Analysis EPA QA/G-9,
QA00 version
EPA 625-R-92-016 (1993; Am 1994) Radon Prevention in Design and
Construction of Schools and Other Large Buildings
EPA 625-R-93-011 (1993) Radon Reduction Technique for Existing
Detached Houses: Technical Guidance for Active
Soil Depressurization Systems
EPA 625/1-86/021 (1986) Design Manual: Municipal Wastewater
Disinfection
EPA 625/6-89/019 (1989) Handbook: Guidance on Setting Permit
Conditions and Reporting Trial Burn Results:
Volume II of the Hazardous Waste Incineration
Guidance Series
EPA 625/6-89/021 (1989) Handbook Hazardous Waste Incineration
Measurement Guidance Manual: Volume III of the
Hazardous Waste Incineration Guidance Series
EPA 625/6-89/023 (1990) Handbook: Quality Assurance/Quality Control
(QA/QC) Procedures For Hazardous Waste Incineration
EPA 712-C-98-075 (1998) Fate, Transport and Transformation Test
Guidelines – OPPTS 835.3100- “Aerobic Aquatic
Biodegradation”
EPA 821-R-02-012 (2002) Methods for Measuring the Acute Toxicity of
Effluents and Receiving Waters to Freshwater and
Marine Organisms
EPA 832-R-92-005 (1992) Storm Water Management for Construction
Activities Developing Pollution Preventions and
Plans and Best Management Practices
EPA 833-R-060-04 (2007) Developing Your Storm Water Pollution
Prevention Plan, a Guide for Construction Sites
Page 223
EPA AP-42 (1995) Compilation of Air Pollution Emission Factors
EPA Method 24 (2000) Determination of Volatile Matter Content,
Water Content, Density, Volume Solids, and Weight
Solids of Surface Coatings
EPA SESDPROC-105-R2 (2013) Groundwater Level and Well Depth Measurement
EPA SM 9223 (2004) Enzyme Substrate Coliform Test
EPA SW-846 (Third Edition; Update IV) Test Methods for
Evaluating Solid Waste: Physical/Chemical Methods
EPA SW-846.3-3 (1999, Third Edition, Update III-A) Test Methods
for Evaluating Solid Waste: Physical/Chemical
Methods
Energy Star (1992; R 2006) Energy Star Energy Efficiency
Labeling System (FEMP)
NPDES (1972; R 2005) National Pollutant Discharge
Elimination System
PL 93-523 (1974; A 1999) Safe Drinking Water Act
U.S. FEDERAL AVIATION ADMINISTRATION (FAA)
FAA 6850.19 (1978) Frangible Coupling
FAA AC 150/5300-13 (2012; Rev A; Change 1 2014) Airport Design
FAA AC 150/5320-12 (1997, Rev C; Change 1-3, 5 and 6) Measurement,
Construction and Maintenance of Skid-Resistant
Airport Pavement Surfaces
FAA AC 150/5340-30 (2010; Rev E) Design and Installation Details for
Airport Visual Aids
FAA AC 150/5345-10 (2005; Rev F) Specification for Constant Current
Regulators Regulator Monitors
FAA AC 150/5345-12 (2005; Rev E) Specification for Airport and
Heliport Beacon
FAA AC 150/5345-13 (2007; Rev B) Specification for L-841 Auxiliary
Relay Cabinet Assembly for Pilot Control of Airport
Lighting Circuits
FAA AC 150/5345-26 (2008; Rev D) FAA Specification for L-823 Plug and
Receptacle, Cable Connectors
FAA AC 150/5345-27 (2013; Rev E) Specification for Wind Cone Assemblies
FAA AC 150/5345-28 (2005; Rev F) Precision Approach Path Indicator
(PAPI) Systems
FAA AC 150/5345-3 (2007; Rev F) Specification for L-821 Panels for
Page 224
Control to Airport Lighting
FAA AC 150/5345-42 (2013; Rev G) Specification for Airport Light
Bases, Transformer Housings, Junction Boxes and
Accessories
FAA AC 150/5345-43 (2006; Rev F) Specification for Obstruction
Lighting Equipment
FAA AC 150/5345-44 (2007; Rev H) Specification for Runway and Taxiway
Signs
FAA AC 150/5345-45 (2007; Rev C) Low-Impact Resistant (LIR) Structures
FAA AC 150/5345-46 (2009; Rev D) Specification for Runway and Taxiway
Light Fixtures
FAA AC 150/5345-47 (2005; Rev B) Specification for Series to Series
Isolation Transformers for Airport Lighting Systems
FAA AC 150/5345-5 (2006; Rev B) Specification for Airport Lighting
Circuit Selector Switch
FAA AC 150/5345-51 (2005; Rev A) Specification for Discharge-Type
Flashing Light Equipment
FAA AC 150/5345-7 (2013; Rev F) Specification for L-824 Underground
Electrical Cable for Airport Lighting Circuits
FAA AC 150/5370-10 (2009; Rev E) Standards for Specifying Construction
of Airports
FAA AC 70/7460-1 (2007; Rev K) Obstruction Marking and Lighting
FAA E-1315 (1967; Rev A; Am 1971) Light Base and Transformer
Housing
FAA E-2159 (2004; Rev E) Runway End Identifier Lighting System
(REIL)
FAA E-2519 (1972; Rev A) Types I and II
FAA E-2628 (1979; Rev B) Sequenced Flashing Lighting System,
Elevated and Semiflush with Dimming and Monitoring
FAA E-2690 (2000; Rev A) Isolation Transformer (1500 watt) for
High Intensity Approach Lighting Systems
FAA E-2702 (2007; Rev A)Low Impact Resistant (LIR) Structures
FAA E-2756 (2004; Rev B) Four Box Precision Approach Path
Indicator (PAPI) without Remote Monitoring
Subsystem (RMS)
FAA E-2980 (2005) Medium Intensity Approach Lighting System
with Runway Alignment Indicator Lights (MALSR)
Page 225
FAA E-982 (2003; Rev J) PAR-56 Lampholder
U.S. FEDERAL COMMUNICATIONS COMMISSION (FCC)
FCC EMC (2002) FCC Electromagnetic Compliance Requirements
FCC Part 15 Radio Frequency Devices (47 CFR 15)
FCC Part 68 Connection of Terminal Equipment to the Telephone
Network (47 CFR 68)
U.S. FEDERAL HIGHWAY ADMINISTRATION (FHWA)
FHWA IF-99-025 (1999) Drilled Shafts: Construction Procedures and
Design Methods (with Errata Sheet)
FHWA IP-84-11 (1984) Handbook on Design and Construction of
Drilled Shafts Under Lateral Load
FHWA NHI-00-043 (2000) Mechanically Stabilized Earth Walls and
Reinforced Soil Slopes Design and Construction
Guidelines (ISDDC)
FHWA RD-89-199 (1989) Hydraulic Stability of Articulated Concrete
Block Revetment Systems During Overtopping Flow
MUTCD (2009) Manual on Uniform Traffic Control Devices
NCHRP 350 (1993) Recommended Procedures for the Safety
Performance Evaluation of Highway Features
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
CID A-A-1689 (Rev B) Tape, Pressure-Sensitive Adhesive, (Plastic
Film)
CID A-A-1922 (Rev A; Notice 2) Shield, Expansion (Caulking
Anchors, Single Lead)
CID A-A-1923 (Rev A; Notice 2) Shield, Expansion (Lag, Machine
and Externally Threaded Wedge Bolt Anchors)
CID A-A-1924 (Rev A; Notice 2) Shield, Expansion (Self Drilling
Tubular Expansion Shell Bolt Anchors
CID A-A-1925 (Rev A; Notice 2) Shield Expansion (Nail Anchors)
CID A-A-1928 (Rev C; Notice 1) Padlock (Combination)
CID A-A-203 (Rev C; Notice 3) Paper, Kraft, Untreated
CID A-A-272 (Rev B; Notice 1) Caulking Compounds
CID A-A-2962 (Rev A; Notice 2) Enamel, Alkyd, Gloss, Low VOC
Content
Page 226
CID A-A-3120 (Rev A) Paint: For Swimming Pools
CID A-A-3130 (Rev A) Paint (For Application to Wet Surfaces)
CID A-A-344 (Rev B; Notice 1) Lacquer (Clear Gloss)
CID A-A-50457 (Rev A; Notice 2) Valves Radiator, Heating Packless
Bonnett, Class 125 PSIG
CID A-A-50494 (Basic; Notice 1) Exhaust Head, Steam
CID A-A-50502 (Basic) Air Conditioners, (Unitary Heat Pump), Air
to Air (3,000 to 300,000 BTU)
CID A-A-50504 (Basic) Analyzers, Flue-Gas, Orsat-Type, Portable
CID A-A-50543 (Basic; Notice 2) Heaters, Convection, Steam or Hot
Water
CID A-A-50544 (Basic; Notice 2) Radiators, Heating, Steam and Hot
Water, Cast Iron
CID A-A-50545 (Basic; Notice 2) Radiator, Heating, Baseboard
Panel, Steam and Hot Water
CID A-A-50553 (Rev A; Notice 1) Fitting for Conduit, Metal, Rigid
(Thick-Wall and Thin-Wall (EMT) Type)
CID A-A-50555 (Basic) Pumping Units, Sewage, Duplex, Centrifugal,
Automatic Wet-Pit Type
CID A-A-50558 (Basic; Notice 1) Valves, Pressure Regulating, Steam
CID A-A-50559 (Basic; Notice 1) Valves, Temperature-Regulating
(Thermostatically Controlled)
CID A-A-50560 (Basic) Pumps, Centrifugal, Water Circulating,
Electric-Motor-Driven
CID A-A-50561 (Basic) Pumps, Rotary, Power-Driven, Viscous Liquids
CID A-A-50562 (Basic) Pump Units, Centrifugal, Water, Horizontal;
General Service and Boiler-Feed: Electric-Motor or
Steam-Turbine-Driven
CID A-A-50565 (Basic) Cabinet, Storage; Wardrobe, Three Drawer
CID A-A-50566 (Basic) Monitoring Devices, Emission, Stack Related
CID A-A-50568 (Basic; Notice 1) Gages, Liquid Level Measuring,
Tank
CID A-A-50573 (Basic) Water Softener Unit, Lime-Soda Type
CID A-A-50696 (Basic) Reels, Static Discharge, Grounding, 50 and
75 Foot Cable Lengths
Page 227
CID A-A-50879 (Rev A) Sterilization Test Strip Set, Bacterial
Spore
CID A-A-51145 (Rev D; Notice 1; Notice 2) Flux, Soldering,
Non-Electronic, Paste and Liquid
CID A-A-52128 (Basic) Shelving, Storage, Stationary and Mobile,
Food Storage
CID A-A-52557 (Rev A; Notice 1) Fuel Oil, Diesel; for Posts,
Camps and Stations
CID A-A-55614 (Basic; Notice 2) Shield, Expansion (Non-Drilling
Expansion Anchors)
CID A-A-55615 (Basic; Notice 2) Shield, Expansion (Wood Screw and
Lag Bolt Self-Threading Anchors
CID A-A-55619 (Rev C; Notice 1) Casters, Industrial, Heavy Duty
CID A-A-58092 (Basic; Notice 1) Tape, Antiseize,
Polytetrafluoroethylene
CID A-A-59213 (Rev A) Splice Connectors
CID A-A-59222 (Basic; Notice 1) Fans, Centrifugal, Draft, Forced
and Induced
CID A-A-59223 (Basic; Notice 1) Cooling Towers, Liquid
CID A-A-59224 (Basic; Notice 2) Meters, Fluid Quantity Volumetric
CID A-A-59249 (Basic; Notice 1; Notice 2) Filters, Fluid,
Pressure, Feedwater
CID A-A-59326 (Rev D) General Specification For Coupling Halves,
Quick-Disconnect, Cam-Locking Type
CID A-A-59502 (Basic) Plastic Sheet, Polycarbonate
CID A-A-59617 (Basic) Unions, Brass or Bronze, Threaded Pipe
Connections and Solder-Joint Tube Connections
CID A-A-60001 (Rev A) Traps, Steam
CID A-A-60003 (Basic) Partitions, Toilet, Complete
CID A-A-60005 (Basic; Notice 2) Frames, Covers, Gratings, Steps,
Sump And Catch Basin, Manhole
CID A-A-857 (Rev B, Notice 3) Thinner, Dope and Lacquer
(Cellulose Nitrate)
FED-STD-141 (Rev D) Paint, Varnish, Lacquer and Related
Materials: Methods of Inspection, Sampling and
Testing
Page 228
FED-STD-209 (Rev E) Airborne Particulate Cleanliness Classes in
Cleanrooms and Clean Zones
FED-STD-228 (2000; Notices 1-5) Cable and Wire, Insulated;
Methods of Testing
FED-STD-313 (Rev D; Notice 1) Material Safety Data,
Transportation Data and Disposal Data for Hazardous
Materials Furnished to Government Activities
FED-STD-595 (Rev C; Notice 1) Colors Used in Government
Procurement
FS AA-D-600 (Rev D, Am 1; Am 4) Door, Vault, Security
FS AA-L-00486 (Rev J) Lockers, Clothing, Steel
FS CCC-C-429 (Rev F; Notice 1) Cloth, Osnaburg, Cotton
FS CCC-C-467 (Rev C; Notice 1) Cloth, Burlap, Jute (or Kenaf)
FS CCC-W-408 (Rev D; Notices 1, 2) Wallcovering, Vinyl Coated
FS F-B-2902 (Basic; Notice 1) Boilers, Steam Watertube (Bent
Tube, Multi-Drum and Cross Drum) Packaged Type
(10,000,000 to 125,000,000 BTU/HR Thermal Output
Capacity)
FS F-B-2903 (Basic; Notice 2) Boilers, Steam and or Water,
Firetube, Scotch Packaged Type (320,001 to
35,000,000 BTU/HR Thermal Output Capacity)
FS F-B-2909 (Basic) Burners, Single Light Oil, Gas, and Light
Oil-Gas Combination for Packaged Heating Boilers
(up to 320,000 BTU/HR Thermal Output Capacity)
FS F-B-2910 (Basic) Burners, Single Oil, Gas, and Gas-Oil
Combination for Packaged Boilers (320,001 to
125,000,000 BTU/HR Thermal Output Capacity)
FS F-F-2901 (Basic; Notice 1) Feeders, Boiler Water Treatment,
By-Pass and Compound Receiver Types
FS F-F-351 (Rev F; Notice 1) Filters and Filter Elements,
Fluid Pressure: Lubricating Oil, Bypass and Full
Flow
FS F-P-2908 (Basic; Notice 1) Pumping Units, Condensate,
Return; and Boiler Feed Package
FS F-T-2907 (Rev A; Notice 1) Tanks, Portable Hot Water Storage
FS F-V-2906 (Basic) Valves, Air Venting, Steam
FS FF-B-588 (Rev E; Notice 1) Bolt, Toggle: and Expansion
Sleeve, Screw
Page 229
FS FF-S-325 (Basic; Int Amd 3; Notices 3, 4) Shield, Expansion;
Nail, Expansion; and Nail, Drive Screw (Devices,
Anchoring, Masonry)
FS HH-I-558 (Rev C; Notice 1) Insulation, Blocks, Boards,
Blankets, Felts, Sleeving (Pipe and Tube Covering),
and Pipe Fitting Covering, Thermal (Mineral Fiber,
Industrial Type)
FS L-C-530 (Rev C; Notice 1) Coating, Pipe, Thermoplastic Resin
FS L-S-125 (Rev B; Notice 1) Screening, Insect, Nonmetallic
FS MM-L-736 (Rev D; Notice 1) Lumber; Hardwood
FS MM-L-751 (Rev H) Lumber; Softwood
FS MMM-A-001993 (1978; Rev A) Adhesive, Epoxy, Flexible, Filled
(For Binding, Sealing, and Grouting)
FS O-D-1276 (Rev B; Notice 1) Disinfectant-Detergent, General
Purpose (Pine Oil)
FS QQ-B-654 (Rev A; Notice 1; AM 1) Brazing Alloys, Silver
FS RR-C-271 (Rev F) Chains and Attachments, Welded and Weldless
FS RR-F-191 (Rev K) Fencing, Wire and Post Metal (and Gates,
Chain-Link Fence Fabric, and Accessories)
FS RR-F-191/1 (Rev F) Fencing, Wire and Post, Metal (Chain-Link
Fence Fabric)
FS RR-F-191/2 (Rev E) Fencing, Wire and Post, Metal (Chain-Link
Fence Gates)
FS RR-F-191/3 (Rev E; Am 1) Fencing, Wire and Post, Metal
(Chain-Link Fence Posts, Top Rails and Braces)
FS RR-F-191/4 (Rev F) Fencing, Wire and Post, Metal (Chain-Link
Fence Accessories)
FS RR-W-410 (Rev G) Wire Rope and Strand
FS S-R-2834 (Basic) Radiators: Heating, Steel, Multifin Type
FS S-U-2833 (Basic; Notice 1) Unit Heater, Air-Circulating,
Steam – Hot Water
FS SS-L-30 (Rev D; Int Am 3; Notice 1) Lath and Board
Products, Gypsum
FS SS-S-1401 (Rev C; Am 1; Notices 1, 2) Sealant, Joint,
Non-Jet-Fuel-Resistant, Hot-Applied, for Portland
Cement and Asphalt Concrete Pavements
FS SS-S-200 (Rev E; Am 1; Notice 1) Sealant, Joint,
Page 230
Two-Component, Jet-Blast-Resistant, Cold-Applied,
for Portland Cement Concrete Pavement
FS TT-B-1325 (Rev D; Notice 1) Beads (Glass Spheres)
Retro-Reflective (Metric)
FS TT-C-490 (Rev F; Am 1) Cleaning Methods for Ferrous Surfaces
and Pretreatments for Organic Coatings
FS TT-C-520 (Rev B; Notice 1) Coating Compound, Bituminous,
Solvent Type, Underbody (for Motor Vehicles)
FS TT-E-489 (Rev J; Notice 2) Enamel, Alkyd, Glass, Low VOC
Content
FS TT-E-491 (Rev C; Notice 1) Enamel; Gloss, Synthetic (for
Metal and Wood Furniture)
FS TT-E-751 (Rev C) Ethyl Acetate
FS TT-F-336 (Rev E; Notice 1) Filler, Wood, Paste
FS TT-P-1952 (Rev E) Paint, Traffic and Airfield Markings,
Waterborne
FS TT-P-28 (Rev H) Paint, Aluminum, Heat Resisting (1200
Degrees F.)
FS TT-P-38 (Rev E; Notice 1) Paint, Aluminum, Ready-Mixed
FS TT-P-645 (Rev C) Primer, Paint, Zinc-Molybdate, Alkyd Type
FS TT-S-001543 (Rev B; Notice 1) Sealing Compound: Silicone
Rubber Base (For Calking, Sealing, and Glazing in
Buildings and Other Structures)
FS TT-V-121 (Rev H; Notice 1) Varnish, Spar, Water-Resisting
FS UU-B-790 (Rev A; Am 1; Notice 1) Building Paper, Vegetable
Fiber: (Kraft, Waterproofed, Water Repellent and
Fire Resistant)
FS W-C-375 (Rev E; Supp 1) Circuit Breakers, Molded Case,
Branch Circuit and Service
FS W-H-2904 (Basic; Notice 1) Heaters, Fluid, Deaerating (For
Water Only) 1,000 to 1,600,000 Pounds Per Hour
Capacity
FS WW-H-191 (Rev E; Notice 2) Heater, Fluid, Industrial
(Instantaneous, Steam, Water Converter Type)
FS WW-P-421 (Rev D; Notice 1) Pipe, Cast, Gray and Ductile
Iron, Pressure (For Water and Other Liquids)
FS WW-P-541 (Rev E; Am 1; Notice 1) Plumbing Fixtures
Page 231
FS WW-S-2739 (Basic; Notice 1) Strainers, Sediment: Pipeline,
Water, Air, Gas, Oil, or Steam
FS XX-C-2816 (Basic; Notice 1) Compressor, Air, Reciprocating or
Rotary, Electric Motor Driven, Stationary, 10 HP
and Larger
GSA HPTP 07656-01 Installing Lead Stone Flashing to Protect Masonry
Joints
QPL-TNT-AP-28 (2004) Paint, Aluminum, Heat Resisting (1200
Degrees F)
U.S. GREEN BUILDING COUNCIL (USGBC)
LEED (2002; R 2005) Leadership in Energy and
Environmental Design(tm) Green Building Rating
System for New Construction (LEED-NC)
LEED GBDC (2009) LEED Reference Guide for Green Building
Design and Construction
LEED NC (2009) Leadership in Energy and Environmental
Design(tm) New Construction Rating System
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
10 CFR 20 Standards for Protection Against Radiation
10 CFR 430 Energy Conservation Program for Consumer Products
10 CFR 431 Energy Efficiency Program for Certain Commercial
and Industrial Equipment
15 CFR 772 Definition of Terms
15 CFR 773 Special Licensing Procedures
16 CFR 1201 Safety Standard for Architectural Glazing Materials
16 CFR 1209 Interim Safety Standard for Cellulose Insulation
16 CFR 1404.4 Requirements to Provide Performance and Technical
Data by Labeling – Notice to Purchasers
16 CFR 1630 Standard for the Surface Flammability of Carpets
and Rugs (FF 1-70)
21 CFR 1020 Performance Standards for Ionizing Radiation
Emitting Products
21 CFR 1040 Performance Standards for Light-Emitting Products
21 CFR 175 Indirect Food Additives: Adhesives and Components
of Coatings
21 CFR 701 Cosmetic Labeling
Page 232
29 CFR 1904 Recording and Reporting Occupational Injuries and
Illnesses
29 CFR 1910 Occupational Safety and Health Standards
29 CFR 1910-SUBPART D Walking – Working Surfaces
29 CFR 1910-SUBPART Q Welding, Cutting, and Brazing
29 CFR 1910-SUBPART Z Toxic and Hazardous Substances
29 CFR 1910.1000 Air Contaminants
29 CFR 1910.1001 Asbestos
29 CFR 1910.1018 Inorganic Arsenic
29 CFR 1910.1025 Lead
29 CFR 1910.1028 Benzene
29 CFR 1910.106 Flammable and Combustible Liquids
29 CFR 1910.12 Construction Work
29 CFR 1910.120 Hazardous Waste Operations and Emergency Response
29 CFR 1910.1200 Hazard Communication
29 CFR 1910.134 Respiratory Protection
29 CFR 1910.141 Sanitation
29 CFR 1910.144 Safety Color Code for Marking Physical Hazards
29 CFR 1910.145 Accident Prevention Signs and Tags
29 CFR 1910.146 Permit-required Confined Spaces
29 CFR 1910.147 Control of Hazardous Energy (Lock Out/Tag Out)
29 CFR 1910.157 (2003) Portable Fire Extinguishers
29 CFR 1910.179 Overhead and Gantry Cranes
29 CFR 1910.20 Access to Employee Exposure and Medical Records
29 CFR 1910.212 Safety Standard for Machinery and Machine Guarding
29 CFR 1910.219 Mechanical Power Transmission Apparatus
29 CFR 1910.23 Guarding Floor and Wall Openings and Holes
29 CFR 1910.24 Fixed Industrial Stairs
29 CFR 1910.27 Fixed Ladders
Page 233
29 CFR 1910.28 Safety Standards for Scaffolding
29 CFR 1910.306 Specific Purpose Equipment and Installations
29 CFR 1910.94 Ventilation
29 CFR 1915 Confined and Enclosed Spaces and Other Dangerous
Atmospheres in Shipyard Employment
29 CFR 1919 Gear Certification
29 CFR 1926 Safety and Health Regulations for Construction
29 CFR 1926.103 Respiratory Protection
29 CFR 1926.1101 Asbestos
29 CFR 1926.1127 Cadmium
29 CFR 1926.1400 Cranes & Derricks in Construction
29 CFR 1926.16 Rules of Construction
29 CFR 1926.200 Accident Prevention Signs and Tags
29 CFR 1926.21 Safety Training and Education
29 CFR 1926.32 Safety and Health Regulations for Construction -
Definition
29 CFR 1926.33 Access to Employee Exposure and Medical Records
29 CFR 1926.450 Scaffolds
29 CFR 1926.500 Fall Protection
29 CFR 1926.501 Duty to Have Fall Protection
29 CFR 1926.502 Fall Protection Systems Criteria and Practices
29 CFR 1926.51 Sanitation
29 CFR 1926.55 Gases, Vapors, Fumes, Dusts, and Mists
29 CFR 1926.59 Hazard Communication
29 CFR 1926.62 Lead
29 CFR 1926.65 Hazardous Waste Operations and Emergency Response
29 CFR 1926.651 Specific Excavation Requirements
29 CFR 1926.652 Safety and Health Regulations for Construction;
Subpart P, Excavations; Requirements for Protective
Systems
Page 234
29 CFR 1926.757 Steel Erection; Open Web Steel Joists
30 CFR 1 Mine Safety and Health Administration;
Establishment and Use of Official Emblem
30 CFR 72 Health Standards for Coal Mines
33 CFR 328 Definitions of Waters of the United States
36 CFR 1191 Americans with Disabilities Act (ADA) Accessibility
Guidelines for Buildings and Facilities;
Architectural Barriers Act (ABA) Accessibility
Guidelines
40 CFR Protection of Environment
40 CFR 112 Oil Pollution Prevention
40 CFR 112.7 General Requirements for Spill Prevention, Control,
and Countermeasure Plans
40 CFR 117 Determination of Reportable Quantities for
Hazardous Substances
40 CFR 122 EPA Administered Permit Programs: The National
Pollutant Discharge Elimination System
40 CFR 122.26 Storm Water Discharges (Applicable to State NPDES
Programs, see section 123.25)
40 CFR 141.80 National Primary Drinking Water Regulations;
Control of Lead and Copper; General Requirements
40 CFR 143 National Secondary Drinking Water Regulations
40 CFR 150 – 189 Pesticide Programs
40 CFR 152 – 186 Pesticide Programs
40 CFR 171 Certification of Pesticide Applicators
40 CFR 241 Guidelines for Disposal of Solid Waste
40 CFR 243 Guidelines for the Storage and Collection of
Residential, Commercial, and Institutional Solid
Waste
40 CFR 247 Comprehensive Procurement Guideline for Products
Containing Recovered Materials
40 CFR 258 Subtitle D Landfill Requirements
40 CFR 260 Hazardous Waste Management System: General
40 CFR 261 Identification and Listing of Hazardous Waste
Page 235
40 CFR 262 Standards Applicable to Generators of Hazardous
Waste
40 CFR 262.22 Number of Copies
40 CFR 263 Standards Applicable to Transporters of Hazardous
Waste
40 CFR 264 Standards for Owners and Operators of Hazardous
Waste Treatment, Storage, and Disposal Facilities
40 CFR 265 Interim Status Standards for Owners and Operators
of Hazardous Waste Treatment, Storage, and Disposal
Facilities
40 CFR 266 Standards for the Management of Specific Hazardous
Wastes and Specific Types of Hazardous Waste
Management Facilities
40 CFR 268 Land Disposal Restrictions
40 CFR 270 EPA Administered Permit Programs: The Hazardous
Waste Permit Program
40 CFR 271 Requirements for Authorization of State Hazardous
Waste Programs
40 CFR 272 Approved State Hazardous Waste Management Programs
40 CFR 273 Standards For Universal Waste Management
40 CFR 279 Standards for the Management of Used Oil
40 CFR 280 Technical Standards and Corrective Action
Requirements for Owners and Operators of
Underground Storage Tanks (UST)
40 CFR 300 National Oil and Hazardous Substances Pollution
Contingency Plan
40 CFR 302 Designation, Reportable Quantities, and Notification
40 CFR 355 Emergency Planning and Notification
40 CFR 372-SUBPART D Specific Toxic Chemical Listings
40 CFR 50 National Primary and Secondary Ambient Air Quality
Standards
40 CFR 50.12 National Primary and Secondary Ambient Air Quality
Standards for Lead
40 CFR 50.6 National Primary and Secondary Ambient Air Quality
Standards for PM10
40 CFR 58 Ambient Air Quality Surveillance
Page 236
40 CFR 60 Standards of Performance for New Stationary Sources
40 CFR 61 National Emission Standards for Hazardous Air
Pollutants
40 CFR 61-SUBPART A General Provisions
40 CFR 61-SUBPART M National Emission Standard for Asbestos
40 CFR 63 National Emission Standards for Hazardous Air
Pollutants for Source Categories
40 CFR 68 Chemical Accident Prevention Provisions
40 CFR 745 Lead-Based Paint Poisoning Prevention in Certain
Residential Structures
40 CFR 761 Polychlorinated Biphenyls (PCBs) Manufacturing,
Processing, Distribution in Commerce, and Use
Prohibitions
40 CFR 761.75 Chemical Waste Landfills
40 CFR 763 Asbestos
40 CFR 82 Protection of Stratospheric Ozone
42 CFR 84 Approval of Respiratory Protective Devices
47 CFR 15 Radio Frequency Devices
47 CFR 17 Construction, Marking, and Lighting of Antenna
Structures
47 CFR 18 (2011) Industrial, Scientific, and Medical Equipment
47 CFR 25 Satellite Communications
47 CFR 68 Connection of Terminal Equipment to the Telephone
Network
47 CFR 76 Multichannel Video and Cable Television Service
47 CFR 76.605 Technical Standards
47 CFR 90 Private Land Mobile Radio Services
48 CFR 23 Environment, Energy and Water Efficiency, Renewable
Energy Technologies, Occupational Safety, and
Drug-Free Workplace
49 CFR 107 Hazardous Materials Program Procedures
49 CFR 171 General Information, Regulations, and Definitions
49 CFR 171 – 178 Hazardous Materials Regulations
Page 237
49 CFR 172 Hazardous Materials Table, Special Provisions,
Hazardous Materials Communications, Emergency
Response Information, and Training Requirements
49 CFR 173 Shippers – General Requirements for Shipments and
Packagings
49 CFR 173.301 Shipment of Compressed Gases in Cylinders and
Spherical Pressure Vessels
49 CFR 174 Carriage by Rail
49 CFR 175 Carriage by Aircraft
49 CFR 176 Carriage by Vessel
49 CFR 177 Carriage by Public Highway
49 CFR 178 Specifications for Packagings
49 CFR 179 Specifications for Tank Cars
49 CFR 192 Transportation of Natural and Other Gas by
Pipeline: Minimum Federal Safety Standards
49 CFR 195 Transportation of Hazardous Liquids by Pipeline
77 FR 12286 Final National Pollutant Discharge Elimination
System (NPDES) General Permit for Stormwater
Discharges from Construction Activities
CPL 2.100 (1995) Application of the Permit-Required Confined
Spaces (PRCS) Standards, 29 CFR 1910.146
PL 102-486 (1992) Residential Energy Efficiency Ratings
PL 109-58 Energy Policy Act of 2005 (EPAct05)
U.S. NAVAL FACILITIES ENGINEERING COMMAND (NAVFAC)
NAVFAC A-A-50570 (1997) Paint, Water-Borne, Acrylic Or Modified
Acrylic, Semigloss, For Metal Surfaces
NAVFAC MO 225 (1990) Industrial Water Treatment
NAVFAC MO 324 (1992) Inspection and Certification of Boilers and
Unfired Pressure Vessels
NAVFAC P-307 (2009; Change 1 Mar 2011; Change 2 Aug
2011)Management of Weight Handling Equipment
ND OPNAVINST 5100.23 (2005; Rev G) Navy Occupational Safety and Health
(NAVOSH) Program Manual
TR-NAVFAC ESC-CI-1215 (2012) Navy User’s Guide for Quality Assurance of
New Concrete Construction
Page 238
U.S. NAVAL FACILITIES ENGINEERING SERVICE CENTER (NFESC)
NFESC CR 80.025 (1980) Testing and Evaluation of Attack Resistance
and Hardening Retrofits of Marine Barrack
Construction Types to Small Arms Multiple Impact
Threat
U.S. NAVAL SEA SYSTEMS COMMAND (NAVSEA)
NAVSEA T9074-AS-GIB-010/2(711999; Notice 1) Requirements for Nondestructive
Testing Methods
QPL-19140 (2011) Lumber and Plywood, Fire-Retardant Treated
QPL-24109 (2012) Valve, Globe, Angle, Quick Change Cartridge
Trim, High Pressure (H.P.) Hydraulic and Pneumatic
(Sizes 1/8 – 1-1/4 Inches)
QPL-26202 (2011) Light, Marker, Airport, Semiflush, General
Specification for
UL ENVIRONMENT (ULE)
ULE Greenguard UL Greenguard Certification Program
UNDERWRITERS LABORATORIES (UL)
UL 1 (2005; Reprint Jul 2012) Standard for Flexible
Metal Conduit
UL 1004-1 (2012; Reprint Sep 2013) Standard for Safety
Rotating Electrical Machines
UL 1008 (2012; Reprint Apr 2013) Transfer Switch Equipment
UL 1012 (2010; Reprint Jan 2012) Power Units Other than
Class 2
UL 1025 (1980; R 1990, Bul. 1991) Electric Air Heaters
UL 1029 (1994; Reprint Dec 2013) High-Intensity-Discharge
Lamp Ballasts
UL 1034 (2011) Burglary-Resistant Electric Locking
Mechanisms
UL 1037 (1999; Reprint Dec 2009) Safety Antitheft Alarms
and Devices
UL 1042 (2009; Reprint Jun 2013) Electric Baseboard Heating
Equipment
UL 1059 (2001; Reprint Oct 2011) Standard for Terminal
Blocks
UL 1063 (2006; Reprint Jul 2012) Machine-Tool Wires and
Cables
Page 239
UL 1066 (2012; Reprint Jul 2013) Low-Voltage AC and DC
Power Circuit Breakers Used in Enclosures
UL 1067 (2011) Electrically Conductive Equipment and
Materials for Use in Flammable Anesthetizing
Locations
UL 1069 (2007; Reprint Apr 2012) Hospital Signaling and
Nurse Call Equipment
UL 1072 (2006; Reprint Jun 2013) Medium-Voltage Power Cables
UL 1076 (1995; Reprint Sep 2010) Proprietary Burglar Alarm
Units and Systems
UL 1086 (2005; Reprint Jun 2010) Standard for Household
Trash Compactors
UL 109 (1997; Reprint Aug 2013) Tube Fittings for
Flammable and Combustible Fluids, Refrigeration
Service, and Marine Use
UL 10A (2009; Reprint Dec 2013) Standard for Tin-Clad Fire
Doors
UL 10B (2008; Reprint Apr 2009) Fire Tests of Door
Assemblies
UL 10C (2009) Standard for Positive Pressure Fire Tests of
Door Assemblies
UL 1203 (2013) UL Standard for Safety Explosion-Proof and
Dust-Ignition-Proof Electrical Equipment for Use in
Hazardous (Classified) Locations
UL 1236 (2006; Reprint Jul 2011) Standard for Battery
Chargers for Charging Engine-Starter Batteries
UL 1242 (2006; Reprint Jul 2012) Standard for Electrical
Intermediate Metal Conduit — Steel
UL 1247 (2007; Reprint Jun 2011) Diesel Engines for Driving
Stationary Fire Pumps
UL 125 (2009; Reprint Nov 2011) Safety Flow Control Valves
for Anhydrous Ammonia and LP-Gas
UL 1256 (2002; Reprint Jul 2013) Fire Test of Roof Deck
Constructions
UL 1283 (2005; Reprint Feb 2013) Electromagnetic
Interference Filters
UL 1286 (2008; Reprint Sep 2013) Office Furnishings
UL 1310 (2011; Reprint Oct 2013) UL Standard for Safety
Class 2 Power Units
Page 240
UL 1316 (1994; Reprint May 2006) Glass-Fiber-Reinforced
Plastic Underground Storage Tanks for Petroleum
Products, Alcohols, and Alcohol-Gasoline Mixtures
UL 140 (2006; Reprint Aug 2012) Relocking Devices for
Safes and Vaults
UL 142 (2006; Reprint Jul 2013) Steel Aboveground Tanks
for Flammable and Combustible Liquids
UL 1437 (2006) Electrical Analog Instruments – Panel Board
Types
UL 1449 (2006; Reprint Sep 2013) Surge Protective Devices
UL 1479 (2003; Reprint Oct 2012) Fire Tests of
Through-Penetration Firestops
UL 1480 (2003; Reprint Oct 2012) Standard for Speakers for
Fire Alarm, Emergency, and Commercial and
Professional Use
UL 1492 (1996; Reprint Jul 2013) Audio-Video Products and
Accessories
UL 14B (2008; Reprint May 2013) Sliding Hardware for
Standard, Horizontally Mounted Tin-Clad Fire Doors
UL 14C (2006; Reprint May 2013) Swinging Hardware for
Standard Tin-Clad Fire Doors Mounted Singly and in
Pairs
UL 154 (2005; Reprint Nov 2010) Carbon-Dioxide Fire
Extinguishers
UL 155 (2000; Reprint Aug 2013) Standard Tests for Fire
Resistance of Vault and File Room Doors
UL 1558 (1999; Reprint Apr 2010) Metal-Enclosed Low-Voltage
Power Circuit Breaker Switchgear
UL 1561 (2011; Reprint Sep 2012) Dry-Type General Purpose
and Power Transformers
UL 1569 (1999; Reprint Jan 2012) Standard for Metal-Clad
Cables
UL 1581 (2001; Reprint Aug 2013) Electrical Wires, Cables,
and Flexible Cords
UL 1598 (2008; Reprint Oct 2012) Luminaires
UL 1610 (1998; Reprint Sep 2010) Standard for
Central-Station Burglar-Alarm Units
UL 1635 (1996; Reprint Jan 2010) Digital Alarm Communicator
System Units
Page 241
UL 1638 (2001; Reprint Oct 2013) Visual Signaling
Appliances – Private Mode Emergency and General
Utility Signaling
UL 1660 (2004; Reprint Apr 2013) Liquid-Tight Flexible
Nonmetallic Conduit
UL 1666 (2007; Reprint Jun 2012) Test for Flame Propagation
Height of Electrical and Optical-Fiber Cables
Installed Vertically in Shafts
UL 1686 (2012; Reprint Jan 2014) Standard for Pin and
Sleeve Configurations
UL 1699 (2006; Reprint Nov 2013) Arc-Fault
Circuit-Interrupters
UL 1738 (2010; Reprint May 2011) Venting Systems for
Gas-Burning Appliances, Categories II, III and IV
UL 174 (2004; Reprint Sep 2012) Household Electric Storage
Tank Water Heaters
UL 1746 (2007; Reprint May 2012) External Corrosion
Protection Systems for Steel Underground Storage
Tanks
UL 1778 (2005; Reprint Oct 2011) Uninterruptible Power
Systems
UL 181 (2013) Factory-Made Air Ducts and Air Connectors
UL 181A (2013) Standard for Closure Systems for Use with
Rigid Air Ducts and Air Connectors
UL 181B (2013) Standard for Closure Systems for Use with
Flexible Air Ducts and Air Connectors
UL 1863 (2004; Reprint Nov 2012) Communication Circuit
Accessories
UL 19 (2013) Lined Fire Hose and Hose Assemblies
UL 1951 (2011) Electric Plumbing Accessories
UL 197 (2010; Reprint Sep 2013) Commercial Electric
Cooking Appliances
UL 1971 (2002; Reprint Oct 2008) Signaling Devices for the
Hearing Impaired
UL 1981 (2003; Reprint Jun 2012) Standard for Central
Station Automation Systems
UL 198M (2003; Reprint Feb 2013) Standard for Mine-Duty
Fuses
Page 242
UL 1995 (2011) Heating and Cooling Equipment
UL 1996 (2009; Reprint Nov 2011) Electric Duct Heaters
UL 20 (2010; Reprint Feb 2012) General-Use Snap Switches
UL 2017 (2008; Reprint May 2011) General-Purpose Signaling
Devices and Systems
UL 2034 (2008; Reprint Feb 2009) Single and Multiple
Station Carbon Monoxide Alarms
UL 2043 (2013) Fire Test for Heat and Visible Smoke Release
for Discrete Products and Their Accessories
Installed in Air-Handling Spaces
UL 2050 (2003; 4th Edition) Standard for National
Industrial Security Systems for the Protection of
Classified Materials (limited distribution
publication, direct purchase request with
justification to UL)
UL 207 (2009; Reprint Jul 2013) Refrigerant-Containing
Components and Accessories, Nonelectrical
UL 2079 (2004; Reprint Dec 2012) Tests for Fire Resistance
of Building Joint Systems
UL 2085 (1997; Reprint Sep 2010) Protected Aboveground
Tanks for Flammable and Combustible Liquids
UL 209 (2011) Cellular Metal Floor Raceways and Fittings
UL 2127 (2012; Reprint Jul 2013) Inert Gas Clean Agent
Extinguishing System Units
UL 2129 (2005; Reprint Mar 2012) Halocarbon Clean Agent
Fire Extinguishers
UL 214 (1997; Rev thru Aug 2001) Tests for
Flame-Propagation of Fabrics and Films
UL 2166 (2012; Reprint Jul 2013) Halocarbon Clean Agent
Extinguishing System Units
UL 2218 (2010; Reprint May 2012) UL Standard for Safety
Impact Resistance of Prepared Roof Covering
MaterialsRef Title
UL 228 (2006; Reprint Nov 2008) Door Closers-Holders, With
or Without Integral Smoke Detectors
UL 231 (2008; Reprint Jun 2010) Power Outlets
UL 246 (2011; Reprint Feb 2013) Hydrants for
Fire-Protection Service
Page 243
UL 248-1 (2011) Low Voltage Fuses – Part 1: General
Requirements
UL 248-12 (2011) Low Voltage Fuses – Part 12: Class R Fuses
UL 250 (1993; Reprint Feb 2013) Household Refrigerators
and Freezers
UL 262 (2004; Reprint Oct 2011) Gate Valves for
Fire-Protection Service
UL 263 (2011) Fire Tests of Building Construction and
Materials
UL 268 (2009) Smoke Detectors for Fire Alarm Systems
UL 268A (2008; Reprint Sep 2009) Smoke Detectors for Duct
Application
UL 294 (2013) Access Control System Units
UL 296 (2003; Reprint Sep 2013) Oil Burners
UL 299 (2012) Dry Chemical Fire Extinguishers
UL 312 (2010) Check Valves for Fire-Protection Service
UL 325 (2013) Door, Drapery, Gate, Louver, and Window
Operators and Systems
UL 33 (2010) Heat Responsive Links for Fire-Protection
Service
UL 330 (2009; Reprint Aug 2013) UL Standard for Safety
Hose and Hose Assemblies for Dispensing Flammable
Liquids
UL 346 (2005; Reprint Nov 2009) Waterflow Indicators for
Fire Protective Signaling Systems
UL 353 (1994; Reprint Nov 2011) Standard for Limit Controls
UL 360 (2013; Reprint May 2013) Liquid-Tight Flexible
Steel Conduit
UL 38 (2008; Reprint Nov 2013) Manual Signaling Boxes for
Fire Alarm Systems
UL 4 (2004; Reprint Oct 2013) Standard for Armored Cable
UL 412 (2011; Reprint Sep 2013) Standard for Refrigeration
Unit Coolers
UL 4248 (2007) UL Standard for Safety Fuseholders
UL 4248-1 (2007; Reprint Oct 2013) UL Standard for Safety
Fuseholders – Part 1: General Requirements
Page 244
UL 4248-12 (2007; Reprint Dec 2012) UL Standard for Safety
Fuseholders – Part 12: Class R
UL 427 (2011; Reprint Feb 2013) Refrigerating Units
UL 429 (2013) Electrically Operated Valves
UL 430 (2009; Reprint Oct 2013) Standard for Waste
Disposers
UL 437 (2013) Key Locks
UL 44 (2010) Thermoset-Insulated Wires and Cables
UL 441 (2010; Reprint May 2010) Gas Vents
UL 444 (2008; Reprint Apr 2010) Communications Cables
UL 448 (2007; Reprint Jul 2013) Centrifugal Stationary
Pumps for Fire-Protection Service
UL 464 (2009; Reprint Apr 2012) Standard for Audible
Signal Appliances
UL 467 (2007) Grounding and Bonding Equipment
UL 471 (2010; Reprint Jun 2013) Commercial Refrigerators
and Freezers
UL 484 (2014) Standard for Room Air Conditioners
UL 486A-486B (2013; Reprint Dec 2013) Wire Connectors
UL 486C (2013; Reprint Dec 2013) Splicing Wire Connectors
UL 486E (2009; Reprint May 2013) Equipment Wiring Terminals
for Use with Aluminum and/or Copper Conductors
UL 489 (2013) Molded-Case Circuit Breakers, Molded-Case
Switches, and Circuit-Breaker Enclosures
UL 497 (2001; Reprint Jul 2013) Protectors for Paired
Conductor Communication Circuits
UL 497B (2004; Reprint Dec 2012) Protectors for Data
Communication Circuits
UL 498 (2012; Reprint Aug 2013) Attachment Plugs and
Receptacles
UL 499 (2005; Reprint Feb 2013) Electric Heating
Appliances
UL 5 (2011) Surface Metal Raceways and Fittings
UL 50 (2007; Reprint Apr 2012) Enclosures for Electrical
Page 245
Equipment, Non-environmental Considerations
UL 506 (2008; Reprint Oct 2013) Specialty Transformers
UL 507 (1999; Reprint Jun 2012) Standard for Electric Fans
UL 508 (1999; Reprint Oct 2013) Industrial Control
Equipment
UL 5085-3 (2006; Reprint Nov 20121) Low Voltage Transformers
- Part 3: Class 2 and Class 3 Transformers
UL 508A (2013; Reprint Jan 2014) Industrial Control Panels
UL 508C (2002; Reprint Nov 2010) Power Conversion Equipment
UL 510 (2005; Reprint Jul 2013) Polyvinyl Chloride,
Polyethylene and Rubber Insulating Tape
UL 512 (1993; R 1993 thru 2008) Standard for Fuseholders
UL 514A (2013) Metallic Outlet Boxes
UL 514B (2012) Conduit, Tubing and Cable Fittings
UL 514C (1996; Reprint Nov 2011) Nonmetallic Outlet Boxes,
Flush-Device Boxes, and Covers
UL 521 (1999; Reprint May 2010) Heat Detectors for Fire
Protective Signaling Systems
UL 536 (1997; Reprint Jun 2003) Flexible Metallic Hose
UL 544 (1998; R 1999) Standard for Medical and Dental
Equipment
UL 555 (2006; Reprint May 2012) Standard for Fire Dampers
UL 555S (2014) Smoke Dampers
UL 567 (2003; Reprint Oct 2011) Emergency Breakaway
Fittings, Swivel Connectors and Pipe-Connection
Fittings for Petroleum Products and LP-Gas
UL 574 (2003; Reprint Oct 2013) Standard for Electric Oil
Heaters
UL 58 (1996; Reprint Jul 1998) Steel Underground Tanks
for Flammable and Combustible Liquids
UL 580 (2006; Reprint Oct 2013) Tests for Uplift
Resistance of Roof Assemblies
UL 586 (2009) Standard for High-Efficiency Particulate,
Air Filter Units
Page 246
UL 595 (1985) Marine-Type Electric Lighting Fixtures
UL 5A (2003; Reprint Jun 2013) Nonmetallic Surface
Raceways and Fittings
UL 6 (2007; reprint Nov 2010) Electrical Rigid Metal
Conduit-Steel
UL 60601-1 (2003; Reprint Apr 2006) Medical Electrical
Equipment, Part 1: General Requirements for Safety
UL 609 (1996; Reprint Sep 2010) Local Burglar Alarm Units
and Systems
UL 60950 (2000; Reprint Oct 2007) Safety of Information
Technology Equipment
UL 626 (2005; Reprint Mar 2012) 2-1/2 Gallon
Stored-Pressure, Water-Type Fire Extinguishers
UL 632 (2000) Standard for Electrically-Actuated
Transmitters
UL 634 (2007; Reprint Mar 2013) Connectors and Switches
for Use with Burglar-Alarm Systems
UL 636 (1996; Reprint Jan 2013) Holdup Alarm Units and
Systems
UL 639 (2007; Reprint May 2012) Standard for Intrusion
Detection Units
UL 641 (2010; Reprint Jun 2013) Type L Low-Temperature
Venting Systems
UL 651 (2011; Reprint Mar 2012) Standard for Schedule 40
and 80 Rigid PVC Conduit and Fittings
UL 651A (2011) Type EB and A Rigid PVC Conduit and HDPE
Conduit
UL 668 (2004; Reprint Dec 2012) Hose Valves for
Fire-Protection Service
UL 67 (2009; Reprint Jan 2013) Standard for Panelboards
UL 674 (2011; Reprint Jul 2013) Electric Motors and
Generators for Use in Division 1 Hazardous
(Classified) Locations
UL 681 (2014) Installation and Classification of Burglar
and Holdup Alarm Systems
UL 6A (2008; Reprint May 2013) Electrical Rigid Metal
Conduit – Aluminum, Red Brass, and Stainless Steel
UL 705 (2004; Reprint Dec 2013) Standard for Power Ventilators
UL 710 (2012) Exhaust Hoods for Commercial Cooking
Equipment
UL 719 (2006; Reprint Apr 2013) Nonmetallic-Sheathed Cables
UL 723 (2008; Reprint Aug 2013) Test for Surface Burning
Characteristics of Building Materials
UL 726 (1995; Reprint Oct 2013) Oil-Fired Boiler Assemblies
UL 727 (2006; Reprint Oct 2013) Standard for Oil-Fired
Central Furnaces
UL 731 (1995; Reprint Oct 2013) Standard for Oil-Fired
Unit Heaters
UL 732 (1995; Reprint Oct 2013) Oil-Fired Storage Tank
Water Heaters
UL 746C (2004; Reprint Aug 2013) Polymeric Materials – Use
in Electrical Equipment Evaluations
UL 749 (2013; Reprint May 2013) Household Dishwashers
UL 752 (2005; Reprint Jul 2011) Standard for
Bullet-Resisting Equipment
UL 763 (2012; Reprint Nov 2013) Standard for
Motor-Operated Commercial Food Preparing Machines
UL 768 (2006; Reprint Jul 2013) Standard for Combination
Locks
UL 773 (1995; Reprint Mar 2002) Standard for Plug-In,
Locking Type Photocontrols for Use with Area
Lighting
UL 773A (2006; Reprint Nov 2013) Standard for Nonindustrial
Photoelectric Switches for Lighting Control
UL 778 (2010; Reprint May 2012) Standard for
Motor-Operated Water Pumps
UL 779 (2011) Standard for Electrically Conductive
Floorings
UL 789 (2004; Reprint Feb 2013) Standard for Indicator
Posts for Fire-Protection Service
UL 790 (2004; Reprint Jul 2013) Standard Test Methods for
Fire Tests of Roof Coverings
UL 795 (2011; Reprint Nov 2013) Standard for
Commercial-Industrial Gas Heating Equipment
Page 248
UL 796 (2010; Reprint Sep 2013) Standard for
Printed-Wiring Boards
UL 797 (2007; Reprint Dec 2012) Electrical Metallic Tubing
– Steel
UL 8 (2005; Reprint Jun 2011) Water Based Agent Fire
Extinguishers
UL 80 (2007; Reprint Jan 2014) Standard for Steel Tanks
for Oil-Burner Fuels and Other Combustible Liquids
UL 817 (2001; Reprint Feb 2014) Standard for Cord Sets and
Power-Supply Cords
UL 823 (2006; Reprint Jan 2012) Standard for Electric
Heaters for Use in Hazardous (Classified) Locations
UL 827 (2008; Reprint Jul 2013) Standard for
Central-Station Alarm Services
UL 83 (2008) Thermoplastic-Insulated Wires and Cables
UL 842 (2007; Reprint Oct 2013) Standard for Valves for
Flammable Fluids
UL 844 (2012) Standard for Luminaires for Use in Hazardous
(Classified) Locations
UL 845 (2005; Reprint Jul 2011) Motor Control Centers
UL 854 (2004; Reprint Sep 2011) Standard for
Service-Entrance Cables
UL 857 (2009; Reprint Dec 2011) Busways
UL 858 (2005; Reprint Jul 2013) Standard for Household
Electric Ranges
UL 860 (2001) Pipe Unions for Flammable and Combustible
Fluids and Fire-Protection Service
UL 864 (2003; Reprint Aug 2012) Standard for Control Units
and Accessories for Fire Alarm Systems
UL 869A (2006) Reference Standard for Service Equipment
UL 87 (2001; Reprint Jun 2008) UL Standard for Safety
Power-Operated Dispensing Devices for Petroleum
Products
UL 870 (2008; Reprint Feb 2013) Standard for Wireways,
Auxiliary Gutters, and Associated Fittings
UL 873 (2007; Reprint Aug 2013) Standard for
Temperature-Indicating and -Regulating Equipment
Page 249
UL 8750 (2009; Reprint Sep 2013) UL Standard for Safety
Light Emitting Diode (LED) Equipment for Use in
Lighting Products
UL 891 (2005; Reprint Oct 2012) Switchboards
UL 9 (2009) Standard for Fire Tests of Window Assemblies
UL 900 (2004; Reprint Feb 2012) Standard for Air Filter
Units
UL 913 (2013) UL Standard for Safety Intrinsically Safe
Apparatus and Associated Apparatus for Use in Class
I, II, and III, Division 1, Hazardous (Classified)
Locations
UL 916 (2007; Reprint Dec 2013) Standard for Energy
Management Equipment
UL 921 (2006; Reprint Jul 2012) Commercial Dishwashers
UL 923 (2013) Standard for Microwave Cooking Appliances
UL 924 (2006; Reprint Feb 2011) Standard for Emergency
Lighting and Power Equipment
UL 935 (2001; Reprint Dec 2013) Standard for
Fluorescent-Lamp Ballasts
UL 94 (2013) Standard for Tests for Flammability of
Plastic Materials for Parts in Devices and
Appliances
UL 943 (2006; Reprint Jun 2012) Ground-Fault
Circuit-Interrupters
UL 96 (2005; Reprint Sep 2013) Standard for Lightning
Protection Components
UL 969 (1995; Reprint Nov 2008) Standard for Marking and
Labeling Systems
UL 96A (2007; Reprint Jan 2014) Standard for Installation
Requirements for Lightning Protection Systems
UL 972 (2006; Reprint Jul 2011) Standard for Burglary
Resisting Glazing Material Type
UL 98 (2004; Reprint May 2012) Enclosed and Dead-Front
Switches
UL 984 (1996; Reprint Sep 2005) Hermetic Refrigerant
Motor-Compressors
UL Bld Mat Dir (2012) Building Materials Directory
UL Elec Equip Dir (2011) Electrical Appliance and Utilization
Page 250
Equipment Directory
UL Electrical Appliance (2012) Electrical Appliance and Utilization
Equipment Directory
UL Electrical Constructn(2012) Electrical Construction Equipment Directory
UL FLAMMABLE & COMBUSTIBL(E2012) Flammable and Combustible Liquids and Gases
Equipment Directory
UL Fire Prot Dir (2012) Fire Protection Equipment Directory
UL Fire Resistance (2012) Fire Resistance Directory
UL MEAPD (2011) Mechanical Equipment and Associated Products
Directory (online version is listed under
Certifications at www.ul.com)
UL RMSD (2012) Roofing Materials and Systems Directory
UL Subject 87A (2014) Outline of Investigation for Power-Operated
Dispensing Devices for Gasoline and
Gasoline/Ethanol Blends with Nominal Ethanol
Concentrations up to 85 Percent (E0 – E85)
UNI-BELL PVC PIPE ASSOCIATION (UBPPA)
UBPPA UNI-B-6 (1998) Recommended Practice for Low-Pressure Air
Testing of Installed Sewer Pipe
UBPPA UNI-PUB-08 (2010) Tapping Guide for PVC Pressure Pipe)
WASHINGTON STATE ADMINISTRATIVE CODE (WAC)
WAC-173-160 Minimum Standards for Construction and Maintenance of Wells
WAC-173-303 Washington Dangerous Waste Regulations
WAC-173-350 Solid Waste Handling Standards
WAC-173-60 Maximum Environmental Noise Levels
WAC-222-30 Timber Harvesting
WAC-246-290 Department of Health Drinking Water Regulation
WASHINGTON STATE DEPARTMENT OF ECOLOGY (WSDE)
WSDE SMM (2012) Washington State Stormwater Management
Manual for Western Washington
WATER ENVIRONMENT FEDERATION (WEF)
WEF MOP 11 (2007) Operation of Municipal Wastewater Treatment Plants
WATER QUALITY ASSOCIATION (WQA)
WQA S-100 (2000) Standard for Household, Commercial and
Portable Exchange Water Softeners
WEST COAST LUMBER INSPECTION BUREAU (WCLIB)
WCLIB 17 (2004) Standard Grading Rules
WESTERN WOOD PRESERVERS INSTITUTE (WWPI)
WWPI Mgt Practices (1996; R 2011) Best Management Practices for the
Use of Treated Wood in Aquatic Environments
WESTERN WOOD PRODUCTS ASSOCIATION (WWPA)
WWPA G-5 (2011) Western Lumber Grading Rules
WWPA Tech Guide (2005) Lumber Technical Guide, Standards and Grading
WINDOW AND DOOR MANUFACTURERS ASSOCIATION (WDMA)
ANSI/WDMA I.S.1A (2013) Interior Architectural Wood Flush Doors
ANSI/WDMA I.S.6A (2013) Interior Architectural Stile and Rail Doors
WDMA I.S.4 (2013) Preservative Treatment for Millwork
WDMA TM-7 (2008) Cycle Slam Test Method
WDMA TM-8 (2008) Hinge Loading Test Method WIRE ROPE TECHNICAL BOARD (WRTB)
WRTB (2005) Wire Rope Users Manual WOOD MOULDING AND MILLWORK PRODUCERS ASSOCIATION (WMMPA)
WMMPA WM 6 (1987) Industry Standard for Non-Pressure Treating
