You are here: [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | » ASTM F XXXX

ASTM F XXXX

  • ASTM F0001-03 : Specification for Nickel-Clad and Nickel-Plated Steel Strip for Electron Tubes

  • ASTM F0003-02A : Specification for Nickel Strip for Electron Tubes

  • ASTM F0004-66R05 : Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes

  • ASTM F0007-95R00 : Specification for Aluminum Oxide Powder

  • ASTM F0014-80R00 : Practice for Making and Testing Reference Glass-Metal Bead-Seal

  • ASTM F0015-04 : Specification for Iron-Nickel-Cobalt Sealing Alloy

  • ASTM F0016-67R00 : Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps

  • ASTM F0017-02 : Terminology Relating to Flexible Barrier Materials

  • ASTM F0018-64R00 : Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices

  • ASTM F0019-64R05E01 : Test Method for Tension and Vacuum Testing Metallized Ceramic Seals

  • ASTM F0021-65R02 : Test Method for Hydrophobic Surface Films by the Atomizer Test

  • ASTM F0022-02 : Test Method for Hydrophobic Surface Films by the Water-Break Test

  • ASTM F0024-04 : Test Method for Measuring and Counting Particulate Contamination on Surfaces

  • ASTM F0025-04 : Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas

  • ASTM F0026 : Test Methods for Determining the Orientation of a Semiconductive Single Crystal

  • ASTM F0028 : Test Methods for Minority-Carrier Lifetime in Bulk Germanium and Silicon by Measurement of Photoconductivity Decay

  • ASTM F0029-97R02 : Specification for Dumet Wire for Glass-to-Metal Seal Applications

  • ASTM F0030-96R02 : Specification for Iron-Nickel Sealing Alloys

  • ASTM F0031-05 : Specification for 42 \% Nickel-6 \% Chromium-Iron Sealing Alloy

  • ASTM F0034-02 : Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials

  • ASTM F0036-99R03 : Test Method for Compressibility and Recovery of Gasket Materials

  • ASTM F0037-00 : Test Methods for Sealability of Gasket Materials

  • ASTM F0038-00 : Test Methods for Creep Relaxation of a Gasket Material

  • ASTM F0042 : Test Methods for Conductivity Type of Extrinsic Semiconducting Materials

  • ASTM F0043 : Test Methods for Resistivity of Semiconductor Materials

  • ASTM F0044-95R00 : Specification for Metallized Surfaces on Ceramic

  • ASTM F0050-92R01E01 : Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles

  • ASTM F0051-00R02E01 : Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments

  • ASTM F0067-00 : Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700),

  • ASTM F0068-99R04 : Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices

  • ASTM F0071 : Practice for Using the Morphological Key for the Rapid Identification of Fibers for Contamination Control in Electron Devices and Microelectronics

  • ASTM F0072-95R01 : Specification for Gold Wire for Semiconductor Lead Bonding

  • ASTM F0073-96R02 : Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps

  • ASTM F0075-01 : Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)

  • ASTM F0076-86R02 : Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors

  • ASTM F0078-97R02 : Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards

  • ASTM F0079-69R00 : Specification for Type 101 Sealing Glass

  • ASTM F0081 : Test Method for Measuring Radial Resistivity Variation on Silicon Wafers

  • ASTM F0083-71R02 : Practice for Definition and Determination of Thermionic Constants of Electron Emitters

  • ASTM F0084 : Test Method for Measuring Resistivity of Silicon Wafers With an In-Line Four-Point Probe

  • ASTM F0085-76R02 : Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes

  • ASTM F0086-04 : Practice for Surface Preparation and Marking of Metallic Surgical Implants

  • ASTM F0088-00 : Test Method for Seal Strength of Flexible Barrier Materials

  • ASTM F0090-01 : Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)

  • ASTM F0091-70R01E01 : Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector

  • ASTM F0092-93R03 : Practice for Determination of Character Yield of Inked Fabric Typewriter and Printer Ribbons

  • ASTM F0095 : Test Method for Thickness of Lightly Doped Silicon Epitaxial Layers on Heavily Doped Silicon Substrates Using an Infrared Dispersive Spectrophotometer

  • ASTM F0096-77R05 : Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms

  • ASTM F0097-72R02E01 : Practices for Determining Hermeticity of Electron Devices by Dye Penetration

  • ASTM F0099-76R01 : Practice for Preparation of Flexible Barrier Material Specifications

  • ASTM F0104-03 : Classification System for Nonmetallic Gasket Materials

  • ASTM F0105-72R00 : Specification for Type 58 Borosilicate Sealing Glass

  • ASTM F0106-00 : Specification for Brazing Filler Metals for Electron Devices

  • ASTM F0109-04 : Terminology Relating to Surface Imperfections on Ceramics

  • ASTM F0110 : Test Method for Thickness of Epitaxial or Diffused Layers in Silicon by the Angle Lapping and Staining Technique

  • ASTM F0111-96R02 : Practice for Determining Barium Yield, Getter Gas Content, and Getter Sorption Capacity for Barium Flash Getters

  • ASTM F0112-00 : Test Method for Sealability of Enveloped Gaskets

  • ASTM F0116-00R04 : Specification for Medical Screwdriver Bits

  • ASTM F0118-04 : Definitions of Terms Relating to Gaskets

  • ASTM F0119-82R02 : Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)

  • ASTM F0129-97R02 : Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than Fabric Type

  • ASTM F0136-02A : Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)

  • ASTM F0137-03 : Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus

  • ASTM F0138-03 : Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

  • ASTM F0139-03 : Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)

  • ASTM F0140-98R03 : Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods

  • ASTM F0141-04 : Terminology Relating to Resilient Floor Coverings

  • ASTM F0142-93R00E01 : Test Method for Indentation of Resilient Floor Tiles (McBurney Test)

  • ASTM F0144-80R00 : Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods

  • ASTM F0145-72R03 : Practice for Evaluating Flat-Faced Gasketed Joint Assemblies

  • ASTM F0146-04 : Test Methods for Fluid Resistance of Gasket Materials

  • ASTM F0147-87R03 : Test Method for Flexibility of Non-Metallic Gasket Materials

  • ASTM F0148-02 : Test Method for Binder Durability of Cork Composition Gasket Materials

  • ASTM F0149-92BR03 : Terminology Relating to Optical Character Recognition

  • ASTM F0150-98 : Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring

  • ASTM F0151 : Test Method for Residual Solvents in Flexible Barrier Materials

  • ASTM F0152-95R02 : Test Methods for Tension Testing of Nonmetallic Gasket Materials

  • ASTM F0153-95R02 : Test Method for Determining the Yield of Wide Inked Computer Ribbons

  • ASTM F0154 : Guide for Identification of Structures and Contaminants Seen on Specular Silicon Surfaces

  • ASTM F0180-94R05 : Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices

  • ASTM F0204-76R02 : Test Method for Surface Flaws in Tungsten Seal Rod and Wire

  • ASTM F0205-94R05 : Test Method for Measuring Diameter of Fine Wire by Weighing

  • ASTM F0218-95R00 : Test Method for Analyzing Stress in Glass

  • ASTM F0219-96R02 : Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps

  • ASTM F0221-98R03 : Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom

  • ASTM F0256-05 : Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium

  • ASTM F0269-60R02 : Test Method for Sag of Tungsten Wire

  • ASTM F0288-96R02 : Specification for Tungsten Wire for Electron Devices and Lamps

  • ASTM F0289-96R02 : Specification for Molybdenum Wire and Rod for Electronic Applications

  • ASTM F0290-94R05 : Specification for Round Wire for Winding Electron Tube Grid Laterals

  • ASTM F0302-04 : Practice for Field Sampling of Aerospace Fluids in Containers

  • ASTM F0303-02 : Practices for Sampling for Particles in Aerospace Fluids and Components

  • ASTM F0307-02 : Practice for Sampling Pressurized Gas for Gas Analysis

  • ASTM F0309-04 : Practice for Liquid Sampling of Noncryogenic Aerospace Propellants

  • ASTM F0310-04 : Practice for Sampling Cryogenic Aerospace Fluids

  • ASTM F0311-97R02 : Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters

  • ASTM F0312-97R03 : Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters

  • ASTM F0316-03 : Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test

  • ASTM F0318-04 : Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids

  • ASTM F0319-91AR03 : Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements

  • ASTM F0320-05 : Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures

  • ASTM F0326-96R01E02 : Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes

  • ASTM F0327-78R00 : Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method

  • ASTM F0328-98R03 : Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical Particles

  • ASTM F0330-89R04 : Test Method for Bird Impact Testing of Aerospace Transparent Enclosures

  • ASTM F0331-00 : Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)

  • ASTM F0335-03 : Terminology Relating to Electrostatic Imaging

  • ASTM F0336-02 : Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service

  • ASTM F0355-01 : Test Method for Shock-Absorbing Properties of Playing Surface Systems and Materials

  • ASTM F0357-78R02 : Practice for Determining Solderability of Thick Film Conductors

  • ASTM F0358-83R02 : Test Method for Wavelength of Peak Photoluminescence and the Corresponding Composition of Gallium Arsenide Phosphide Wafers

  • ASTM F0359 : Practice for Static Immersion Testing of Unstressed Materials in Nitrogen Tetroxide (NO)

  • ASTM F0360-82R01 : Practice for Image Evaluation of Electrostatic Business Copies

  • ASTM F0362-91R00E01 : Test Method for Determining the Erasability of Inked Ribbons

  • ASTM F0363-99R04 : Test Method for Corrosion Testing of Gaskets

  • ASTM F0364-96R02 : Specification for Molybdenum Flattened Wire for Electron Tubes

  • ASTM F0366-04 : Specification for Fixation Pins and Wires

  • ASTM F0370 : Specification for Proximal Femoral Endoprosthesis

  • ASTM F0371 : Test Method for Compatibility of Materials with Liquid Oxygen (Reaction Intensity Method)

  • ASTM F0372-99R03 : Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique

  • ASTM F0373-01 : Test Method for Embossed Depth of Resilient Floor Coverings

  • ASTM F0374 : Test Method for Sheet Resistance of Silicon Epitaxial, Diffused, Polysilicon, and Ion-implanted Layers Using an In-Line Four-Point Probe with the Single-Configuration Procedure

  • ASTM F0375-89R05 : Specification for Integrated Circuit Lead Frame Material

  • ASTM F0377-03 : Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires

  • ASTM F0381-04 : Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines

  • ASTM F0382-99R03E01 : Specification and Test Method for Metallic Bone Plates

  • ASTM F0384-00 : Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices

  • ASTM F0386-02 : Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces

  • ASTM F0387-02 : Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer

  • ASTM F0390-98R03 : Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array

  • ASTM F0391 : Test Methods for Minority Carrier Diffusion Length in Extrinsic Semiconductors by Measurement of Steady-State Surface Photovoltage

  • ASTM F0392-93R04 : Test Method for Flex Durability of Flexible Barrier Materials

  • ASTM F0395-03 : Terminology Relating to Vacuum Cleaners

  • ASTM F0396-00R04 : Practice for Comparing One-Time Noncorrectable Typewriter Ribbons

  • ASTM F0397 : Test Method for Resistivity of Silicon Bars Using a Two-Point Probe

  • ASTM F0398 : Test Method for Majority Carrier Concentration in Semiconductors by Measurement of Wavenumber or Wavelength of the Plasma Resonance Minimum

  • ASTM F0400-04 : Consumer Safety Specification for Lighters

  • ASTM F0402-93R99 : Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

  • ASTM F0403-98 : Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using Highway Vehicles

  • ASTM F0404-04 : Consumer Safety Specification for High Chairs

  • ASTM F0405-97 : Specification for Corrugated Polyethylene (PE) Pipe and Fittings

  • ASTM F0406-05 : Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards

  • ASTM F0408-99 : Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer

  • ASTM F0409-02 : Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

  • ASTM F0410-02 : Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement

  • ASTM F0412-01AE01 : Terminology Relating to Plastic Piping Systems

  • ASTM F0413 : Practice for Preparation of an Offset Duplicator for Use in Functional Testing of Lithographic Copy Products

  • ASTM F0414-00 : Test Method for Energy Absorbed by a Tire When Deformed by a Slow-Moving Plunger

  • ASTM F0415-87R00E01 : Test Method for Curl in Carbon Paper

  • ASTM F0418-77R02 : Practice for Preparation of Samples of the Constant Composition Region of Epitaxial Gallium Arsenide Phosphide for Hall Effect Measurements

  • ASTM F0420-04 : Test Method for Access Depth Under Furniture of Vacuum Cleaners

  • ASTM F0421-00 : Test Method for Measuring Groove and Void Depth in Passenger Car Tires

  • ASTM F0423 : Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges

  • ASTM F0424-98 : Test Method for Tires for Wet Driving Traction in Straight-Ahead Motion Using Highway Vehicles

  • ASTM F0425 : Terminology Relating to Lithographic Copy Products

  • ASTM F0428-03A : Test Method for Intensity of Scratches on Aerospace Glass Enclosures

  • ASTM F0429-01 : Test Method for Shock-Attenuation Characteristics of Protective Headgear for Football

  • ASTM F0430-05 : Test Methods for Paper Used for Vacuum Cleaner Filter Bags

  • ASTM F0431-04 : Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners

  • ASTM F0432-04 : Specification for Roof and Rock Bolts and Accessories

  • ASTM F0433-02 : Practice for Evaluating Thermal Conductivity of Gasket Materials

  • ASTM F0434-93R03 : Test Method for Blow-Out Testing of Preformed Gaskets

  • ASTM F0436-04 : Specification for Hardened Steel Washers

  • ASTM F0436M-04 : Specification for Hardened Steel Washers \[Metric\]

  • ASTM F0437-99 : Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

  • ASTM F0438-04 : Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

  • ASTM F0439-02E01 : Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

  • ASTM F0441/F0441M-02 : Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

  • ASTM F0442/F0442M-99 : Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR\NPR)

  • ASTM F0444-88R04E01 : Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas

  • ASTM F0445-88R04E01 : Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas

  • ASTM F0446-85R04E01 : Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area

  • ASTM F0448-99R05 : Test Method for Measuring Steady-State Primary Photocurrent

  • ASTM F0449-02E01 : Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control

  • ASTM F0450-01 : Test Methods for Vacuum Cleaner Hose\MDurability and Reliability (Plastic Wire Reinforced)

  • ASTM F0451-99AE01 : Specification for Acrylic Bone Cement

  • ASTM F0452-76R02 : Specification for Preformed Cranioplasty Plates

  • ASTM F0457-04 : Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation

  • ASTM F0458-84R01 : Practice for Nondestructive Pull Testing of Wire Bonds

  • ASTM F0459-84R01 : Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds

  • ASTM F0462-79R99 : Consumer Safety Specification for Slip-Resistant Bathing Facilities

  • ASTM F0467-03A : Specification for Nonferrous Nuts for General Use

  • ASTM F0467M-03A : Specification for Nonferrous Nuts for General Use \[Metric\]

  • ASTM F0468-03A : Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use

  • ASTM F0468M-03A : Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use \[Metric\]

  • ASTM F0470-89R03 : Practice for Caking Temperature of Dry Electrostatic Toner

  • ASTM F0471-76R02 : Terminology Relating to Combination Locks

  • ASTM F0472-92R98 : Terminology for Geometry of Alpine Skis

  • ASTM F0473-96R03 : Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings

  • ASTM F0474 : Specification for Static Screw-Retention Strength of Binding Mounting Area on Alpine Skis

  • ASTM F0475 : Specification for Test Screw Used in Screw-Retention Test of Binding Mounting Area on Alpine Skis

  • ASTM F0476-84R02 : Test Methods for Security of Swinging Door Assemblies

  • ASTM F0477-02E01 : Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

  • ASTM F0478-92R99 : Specification for In-Service Care of Insulating Line Hose and Covers

  • ASTM F0479-95R01 : Specification for In-Service Care of Insulating Blankets

  • ASTM F0480-02 : Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80

  • ASTM F0481-97R02 : Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields

  • ASTM F0482-03 : Test Method for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals

  • ASTM F0483-98R02E01 : Test Method for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals

  • ASTM F0484-02 : Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds

  • ASTM F0485-02 : Test Method for Effects of Cleaners on Unpainted Aircraft Surfaces

  • ASTM F0486-01 : Practice for Preparation of Use and Care Booklets for Vacuum Cleaners

  • ASTM F0487-88R01 : Specification for Fine Aluminum\N1 \% Silicon Wire for Semiconductor Lead-Bonding

  • ASTM F0488 : Test Method for On-Site Screening of Heterotrophic Bacteria in Water

  • ASTM F0489 : Test Method for Using a James Machine

  • ASTM F0491 : Specification for Poly(Vinylidene Fluoride) (PVDF) Plastic-Lined Ferrous Metal Pipe and Fittings

  • ASTM F0492 : Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings

  • ASTM F0493-04 : Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

  • ASTM F0494-05 : Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners

  • ASTM F0495-99AR04 : Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures

  • ASTM F0496-02AE01 : Specification for In-Service Care of Insulating Gloves and Sleeves

  • ASTM F0497-00R04 : Practice for Use of the Electric and Electronic Typewriter as a Test Instrument

  • ASTM F0498-77R98 : Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis

  • ASTM F0502-02 : Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces

  • ASTM F0504-05 : Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings

  • ASTM F0505-87R01 : Practice for the Comparative Evaluation of the Imaging Properties of Liquid Electrostatic Toners

  • ASTM F0506 : Practice for Assessing the Quality of Direct-Image Paper Offset Masters

  • ASTM F0508-77R02 : Practice for Specifying Thick-Film Pastes

  • ASTM F0509-86R04 : Practice for Testing One-Time Carbonizing Tissue for Pinholes

  • ASTM F0510-93R04 : Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method

  • ASTM F0511-04 : Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile

  • ASTM F0512-95R01E01 : Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation

  • ASTM F0513-00 : Safety Specification for Eye and Face Protective Equipment for Hockey Players

  • ASTM F0519-05 : Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments

  • ASTM F0520-97R04 : Test Method for Environmental Resistance of Aerospace Transparencies

  • ASTM F0521-83R04 : Test Methods for Bond Integrity of Transparent Laminates

  • ASTM F0523 : Practice for Unaided Visual Inspection of Polished Silicon Wafer Surfaces

  • ASTM F0525 : Test Method for Measuring Resistivity of Silicon Wafers Using a Spreading Resistance Probe

  • ASTM F0526-97R03 : Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests

  • ASTM F0528-99R05 : Test Method of Measurement of Common-Emitter DC Current Gain of Junction Transistors

  • ASTM F0533 : Test Method for Thickness and Thickness Variation of Silicon Wafers

  • ASTM F0534 : Test Method for Bow of Silicon Wafers

  • ASTM F0536 : Test Method for Size of Resilient Floor Tile by Dial Gage Method

  • ASTM F0537-01 : Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials

  • ASTM F0538-03 : Terminology Relating to the Characteristics and Performance of Tires

  • ASTM F0539-01 : Practice for Fitting Athletic Footwear

  • ASTM F0540 : Test Method for Squareness of Resilient Floor Tile by Gage Method

  • ASTM F0541-04 : Specification for Alloy Steel Eyebolts

  • ASTM F0542-02 : Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation

  • ASTM F0543-02 : Specification and Test Methods for Metallic Medical Bone Screws

  • ASTM F0545 : Specification for PVC and ABS Injected Solvent Cemented Plastic Pipe Joints

  • ASTM F0546 : Specification for Perfluoro (Ethylene-Propylene) Copolymer (FEP) Plastic-Lined Ferrous Metal Pipe and Fittings

  • ASTM F0547-01 : Terminology of Nails for Use with Wood and Wood-Base Materials

  • ASTM F0548-03AE01 : Test Method for Intensity of Scratches on Aerospace Transparent Plastics

  • ASTM F0549-85R04 : Terminology Relating to Carbonless Copy Products

  • ASTM F0550 : Test Method for Lithographic Properties of Imaging Materials

  • ASTM F0551-89R00 : Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires

  • ASTM F0552-02 : Terminology Relating to Chain Link Fencing

  • ASTM F0555-01 : Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner

  • ASTM F0556-88R01 : Test Method for Curl of Carbonless Copy Papers

  • ASTM F0558-03 : Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners

  • ASTM F0559-95R00 : Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel

  • ASTM F0560-05 : Specification for Unalloyed Tantalum for Surgical Implant Applications(UNS R05200, UNS R05400)

  • ASTM F0561-05 : Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

  • ASTM F0562-02 : Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)

  • ASTM F0563 : Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications (UNS R30563)

  • ASTM F0564-02 : Specification and Test Methods for Metallic Bone Staples

  • ASTM F0565-04 : Practice for Care and Handling of Orthopedic Implants and Instruments

  • ASTM F0567-00 : Practice for Installation of Chain-Link Fence

  • ASTM F0568M-04 : Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners

  • ASTM F0571-87R01 : Practice for Installation of Exit Devices in Security Areas

  • ASTM F0576 : Test Method for Measurement of Insulator Thickness and Refractive Index on Silicon Substrates by Ellipsometry

  • ASTM F0577-03E01 : Test Method for Particle Size Measurement of Dry Toners

  • ASTM F0584-87R99 : Practice for Visual Inspection of Semiconductor Lead-Bonding Wire

  • ASTM F0585-94R00 : Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers

  • ASTM F0588-04 : Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact

  • ASTM F0589-00 : Consumer Safety Specification for Non-Powder Guns

  • ASTM F0590-92R00 : Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants

  • ASTM F0592-84R01 : Terminology of Collated and Cohered Fasteners and Their Application Tools

  • ASTM F0593-02E02 : Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

  • ASTM F0594-02 : Specification for Stainless Steel Nuts

  • ASTM F0595-01 : Test Methods for Vacuum Cleaner Hose\MDurability and Reliability (All-Plastic Hose)

  • ASTM F0596-82R03 : Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners

  • ASTM F0597-83R03 : Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter

  • ASTM F0598-00R04 : Practice for Determining the Resistance of Carbonless Papers to Capsular Damage

  • ASTM F0599 : Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings

  • ASTM F0601-03 : Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants

  • ASTM F0602-98AR03 : Criteria for Implantable Thermoset Epoxy Plastics

  • ASTM F0603-00 : Specification for High-Purity Dense Aluminum Oxide for Medical Application

  • ASTM F0605-88R01 : Practice for Determining the Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set

  • ASTM F0606-02E01 : Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets

  • ASTM F0606M-02 : Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets \[Metric\]

  • ASTM F0607-03 : Test Method for Adhesion of Gasket Materials to Metal Surfaces

  • ASTM F0608-03 : Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners

  • ASTM F0609-96E01 : Test Method for Using a Horizontal Pull Slipmeter (HPS)

  • ASTM F0610/F0610M-00A : Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique

  • ASTM F0615M-95R02 : Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components \[Metric\]

  • ASTM F0616M-96R03 : Test Method for Measuring MOSFET Drain Leakage Current \[Metric\]

  • ASTM F0617-00 : Test Method for Measuring MOSFET Linear Threshold Voltage

  • ASTM F0619-03 : Practice for Extraction of Medical Plastics

  • ASTM F0620-00 : Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants

  • ASTM F0621-02 : Specification for Stainless Steel Forgings for Surgical Implants

  • ASTM F0622-79R02 : Specification for Preformed Cranioplasty Plates That Can Be Altered

  • ASTM F0623-99E01 : Performance Specification for Foley Catheter

  • ASTM F0624-98AR03 : Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications

  • ASTM F0625-94R00 : Practice for Classifying Water Bodies for Spill Control Systems

  • ASTM F0626-96AR03 : Specification for Fence Fittings

  • ASTM F0627-99R03 : Practice for Testing Flake of Single-Strike Film Typewriter Ribbons

  • ASTM F0628-01 : Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

  • ASTM F0629-02 : Practice for Radiography of Cast Metallic Surgical Implants

  • ASTM F0631-99 : Guide for Collecting Skimmer Performance Data in Controlled Environments

  • ASTM F0637-85R01 : Specification for Format, Physical Properties, and Test Methods for 19 and 35 mm Testable Tape Carrier for Perimeter Tape Carrier-Bonded Semiconductor Devices

  • ASTM F0638-88R01 : Specification for Fine Aluminum\M1 \% Magnesium Wire for Semiconductor Lead-Bonding

  • ASTM F0639-98AR03 : Specification for Polyethylene Plastics for Medical Applications

  • ASTM F0640-79R00 : Test Methods for Radiopacity of Plastics for Medical Use

  • ASTM F0641-98AR03 : Specification for Implantable Epoxy Electronic Encapsulants

  • ASTM F0645-04 : Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

  • ASTM F0647-94R00 : Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application

  • ASTM F0648-04 : Specification for Ultra-High-Molecular Weight Polyethylene Powder and Fabricated Form for Surgical Implants

  • ASTM F0649-01 : Practice for Secondary Calibration of Airborne Particle Counter Using Comparison Procedures

  • ASTM F0653 : Test Method for Evaluation of Electrostatic Masters

  • ASTM F0654-03 : Specification for Residential Chain Link Fence Gates

  • ASTM F0655-03 : Specification for Test Carpets and Pads for Vacuum Cleaner Testing

  • ASTM F0656-02 : Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

  • ASTM F0657 : Test Method for Measuring Warp and Total Thickness Variation on Silicon Wafers by Noncontact Scanning

  • ASTM F0658-00A : Practice for Calibration of a Liquid-Borne Particle Counter Using an Optical System Based Upon Light Extinction

  • ASTM F0659-98E01 : Specification for Skier Goggles and Faceshields

  • ASTM F0660-83R02E01 : Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters

  • ASTM F0665-98R03 : Classification for Vinyl Chloride Plastics Used in Biomedical Application

  • ASTM F0667-97 : Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings

  • ASTM F0668-04 : Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric

  • ASTM F0670-02 : Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing

  • ASTM F0671 : Test Method for Measuring Flat Length on Wafers of Silicon and Other Electronic Materials

  • ASTM F0672 : Test Method for Measuring Resistivity Profiles Perpendicular to the Surface of a Silicon Wafer Using a Spreading Resistance Probe

  • ASTM F0673 : Test Methods for Measuring Resistivity of Semiconductor Slices or Sheet Resistance of Semiconductor Films with a Noncontact Eddy-Current Gage

  • ASTM F0674 : Practice for Preparing Silicon for Spreading Resistance Measurements

  • ASTM F0676-97R03 : Test Method for Measuring Unsaturated TTL Sink Current

  • ASTM F0677-04 : Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications

  • ASTM F0679-03 : Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

  • ASTM F0680-80R02 : Test Methods for Nails

  • ASTM F0681-82R04 : Practice for Use of Branch Connections

  • ASTM F0682-82AR04 : Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings

  • ASTM F0683-03A : Practice for Selection and Application of Thermal Insulation for Piping and Machinery

  • ASTM F0685-96R01 : Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems

  • ASTM F0686-94R01 : Practice for Evaluation of Image Quality Produced by a Carbonless Copy Paper with an Electric or Electronic Typewriter

  • ASTM F0688-00 : Specification for Wrought Cobalt-35 Nickel-20 Chromium-10 Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)

  • ASTM F0689-97R04 : Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings

  • ASTM F0690-86R03E02 : Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems

  • ASTM F0692-97R02 : Test Method for Measuring Adhesion Strength of Solderable Films to Substrates

  • ASTM F0693-01 : Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers

  • ASTM F0694-02E01 : Test Method for Heel-Attaching Strength of Women’s Shoes

  • ASTM F0695-01 : Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials

  • ASTM F0696-02 : Specification for Leather Protectors for Rubber Insulating Gloves and Mittens

  • ASTM F0697-00 : Practice for Care and Use of Athletic Mouth Protectors

  • ASTM F0698-94R00 : Specification for Physical Information to be Provided for Amusement Rides and Devices

  • ASTM F0699-00E01 : Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing

  • ASTM F0700-93R02 : Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments

  • ASTM F0701-81R02 : Practice for Care and Handling of Neurosurgical Implants and Instruments

  • ASTM F0702-98AR03 : Specification for Polysulfone Resin for Medical Applications

  • ASTM F0703-96R02 : Specification for Implantable Breast Prostheses

  • ASTM F0704-81R01 : Practice for Selecting Bolting Lengths for Piping System Flanged Joints

  • ASTM F0706-96R01 : Practice for Determination of Fusion Temperature of Dry Electrostatic Heat-Fixing Toners

  • ASTM F0707/F0707M-94R01 : Specification for Modular Gage Boards

  • ASTM F0708-92R04 : Practice for Design and Installation of Rigid Pipe Hangers

  • ASTM F0710-05 : Practice for Preparing Concrete Floors to Receive Resilient Flooring

  • ASTM F0711-02 : Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools

  • ASTM F0712-88R00 : Test Methods for Electrically Insulating Plastic Guard Equipment for Protection of Workers

  • ASTM F0714-03 : Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter

  • ASTM F0715-95R02 : Test Methods for Coated Fabrics Used for Oil Spill Control and Storage

  • ASTM F0716-82R01 : Test Methods for Sorbent Performance of Absorbents

  • ASTM F0717-89R00 : Specification for Football Helmets

  • ASTM F0718-99R05 : for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet

  • ASTM F0719-81R02E01 : Practice for Testing Biomaterials in Rabbits for Primary Skin Irritation

  • ASTM F0720-81R02E01 : Practice for Testing Guinea Pigs for Contact Allergens : Guinea Pig Maximization Test

  • ASTM F0721-81R04 : Specification for Gage Piping Assemblies

  • ASTM F0722-82R04 : Specification for Welded Joints for Shipboard Piping Systems

  • ASTM F0723 : Practice for Conversion Between Resistivity and Dopant Density for Boron-Doped, Phosphorus-Doped, and Arsenic-Doped Silicon

  • ASTM F0724-94AR04 : Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance

  • ASTM F0725-03E01 : Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards

  • ASTM F0726-99 : Test Method for Sorbent Performance of Adsorbents

  • ASTM F0728 : Practice for Preparing An Optical Microscope for Dimensional Measurements

  • ASTM F0732-00 : Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses

  • ASTM F0733-90R03 : Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method

  • ASTM F0734-95R01 : Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material

  • ASTM F0735-94R01 : Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method

  • ASTM F0736-95R01 : Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight

  • ASTM F0738M-02 : Specification for Stainless Steel Metric Bolts, Screws, and Studs

  • ASTM F0739-99A : Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact

  • ASTM F0744M-97R03 : Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits \[Metric\]

  • ASTM F0745-00 : Specification for 18Chromium-12.5Nickel-2.5Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications

  • ASTM F0746-04 : Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

  • ASTM F0747-97 : Terminology Relating to Amusement Rides and Devices

  • ASTM F0748-04 : Practice for Selecting Generic Biological Test Methods for Materials and Devices

  • ASTM F0749-98R02E02 : Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit

  • ASTM F0750-87R02E01 : Practice for Evaluating Material Extracts by Systemic Injection in the Mouse

  • ASTM F0751 : Test Method for Measuring Particle Size of Wide-Size Range Dry Toners

  • ASTM F0754-00 : Specification for Implantable Polytetrafluoroethylene (PTFE) Polymer Fabricated in Sheet, Tube, and Rod Shapes

  • ASTM F0755-99R05 : Specification for Selection of Porous Polyethylene for Use in Surgical Implants

  • ASTM F0756-00 : Practice for Assessment of Hemolytic Properties of Materials

  • ASTM F0757-01 : Test Method for Determining Energy Consumption of Copier and Copier-Duplicating Equipment

  • ASTM F0758-95R00 : Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage

  • ASTM F0760-93R00 : Specification for Food Service Equipment Manuals

  • ASTM F0761 : Specification for Strength Requirements of Tubular Steel Posts and Rails for Residential Chain-Link Fence

  • ASTM F0762-94R00E01 : Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires

  • ASTM F0763-04 : Practice for Short-Term Screening of Implant Materials

  • ASTM F0764 : Practice for Compatibility of Materials with High-Energy Propellants (Impact Sensitivity Threshold Technique)

  • ASTM F0765-93R98 : Specification for Wildcats, Ship Anchor Chain

  • ASTM F0766-82R00E01 : Test Method for Melting Point of Waxes

  • ASTM F0767-98R02 : Test Method for Image Stability of Chemical Carbonless Paper to Light

  • ASTM F0769-00 : Test Method for Measuring Transistor and Diode Leakage Currents

  • ASTM F0770-93R00 : Practice for Operation Procedures for Amusement Rides and Devices

  • ASTM F0771-99E01 : Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems

  • ASTM F0773M-96R03 : Practice for Measuring Dose Rate Response of Linear Integrated Circuits \[Metric\]

  • ASTM F0778-88R01 : Methods for Gas Flow Resistance Testing of Filtration Media

  • ASTM F0779-93R98 : Test Method for Torsion Characteristic of Alpine Skis

  • ASTM F0780-93AR98 : Test Method for Linear Deformation and Breaking Strength of Alpine Skis

  • ASTM F0781 : Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings

  • ASTM F0782-01 : Specification for Doors, Furniture, Marine

  • ASTM F0783-88R03 : Specification for Staple, Handgrab, Handle, and Stirrup Rung

  • ASTM F0788/F0788M-02 : Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

  • ASTM F0789 : Specification for Type PS-46 and Type PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings

  • ASTM F0790-02 : Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

  • ASTM F0791-96R02 : Test Method for Stress Crazing of Transparent Plastics

  • ASTM F0792-01E02 : Practice for Evaluating the Imaging Performance of Security X-Ray Systems

  • ASTM F0793-93R04 : Classification of Wallcovering by Durability Characteristics

  • ASTM F0794-03 : Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

  • ASTM F0798-97R02 : Practice for Determining Gettering Rate, Sorption Capacity, and Gas Content of Nonevaporable Getters in the Molecular Flow Region

  • ASTM F0799-02 : Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)

  • ASTM F0801-96R02 : Test Method for Measuring Optical Angular Deviation of Transparent Parts

  • ASTM F0802-83R03 : Guide for Selection of Certain Walkway Surfaces When Considering Footwear Traction

  • ASTM F0803-03 : Specification for Eye Protectors for Selected Sports

  • ASTM F0806-99AR03 : Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials

  • ASTM F0807-83R03 : Practice for Determining Resolution Capability of Office Copiers

  • ASTM F0810-01 : Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields

  • ASTM F0811-02 : Practice for Accelerometer Use in Vehicles for Tire Testing

  • ASTM F0812/F0812M-03 : Specification for Surface Discontinuities of Nuts, Inch and Metric Series

  • ASTM F0813-01 : Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices

  • ASTM F0816-83R03 : Test Method for Combined Fine and Gross Leaks for Large Hybrid Microcircuit Packages

  • ASTM F0818-93R03 : Terminology Relating to Spill Response Barriers

  • ASTM F0819-05 : Terminology Relating to Electrical Protective Equipment for Workers

  • ASTM F0820-03 : Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems

  • ASTM F0821/F0821M-01 : Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

  • ASTM F0822-93R04 : Specification for Chest of Drawers (Chiffonier), Steel, Marine

  • ASTM F0823-93R04 : Specification for Desk, Log, Marine, Steel, with Cabinet

  • ASTM F0824-93R04 : Specification for Tables, Mess, Marine, Steel

  • ASTM F0825-93R04 : Specification for Drawers, Furniture, Marine, Steel

  • ASTM F0826-94R04 : Specification for Tops, Furniture, Marine, Steel

  • ASTM F0832-90R01 : Classification for Security Seals

  • ASTM F0833-05 : Consumer Safety Performance Specification for Carriages and Strollers

  • ASTM F0834-84R99 : Consumer Safety Specification for Toy Chests

  • ASTM F0835-04 : Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

  • ASTM F0835M-04 : Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws \[Metric\]

  • ASTM F0836M-02 : Specification for Style 1 Stainless Steel Metric Nuts

  • ASTM F0837-02A : Specification for Stainless Steel Socket Head Cap Screws

  • ASTM F0837M-02A : Specification for Stainless Steel Socket Head Cap Screws \[Metric\]

  • ASTM F0838-05 : Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration

  • ASTM F0839-83R98 : Specification for Cautionary Labeling of Portable Gasoline Containers for Consumer Use

  • ASTM F0840-83R03 : Specification for Ladders, Fixed, Vertical, Steel, Ship’s

  • ASTM F0841-84R98 : Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels

  • ASTM F0842-04 : Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

  • ASTM F0843-98R03 : Test Method for Assessing the Color Strength and Dispersibility of Alkali Blue Pigment in Hot Melt Carbon Copy Paper Ink

  • ASTM F0844-04 : Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

  • ASTM F0845 : Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing

  • ASTM F0846-92R03 : Guide for Testing Performance of Amusement Rides and Devices

  • ASTM F0847 : Test Methods for Measuring Crystallographic Orientation of Flats on Single Crystal Silicon Wafers by X-Ray Techniques

  • ASTM F0851-87R05 : Test Method for Self-Rising Seat Mechanisms

  • ASTM F0852-99E01 : Specification for Portable Gasoline Containers for Consumer Use

  • ASTM F0853-04 : Practice for Maintenance Procedures for Amusement Rides and Devices

  • ASTM F0854-83R03 : Test Method for Cleanliness of Carbon Paper

  • ASTM F0855-04 : Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment

  • ASTM F0856-97R04 : Practice for Mechanical Symbols, Shipboard\MHeating, Ventilation, and Air Conditioning (HVAC)

  • ASTM F0857-02 : Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Stationary Rack Type

  • ASTM F0858-02 : Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor Rack Type

  • ASTM F0859-04 : Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type

  • ASTM F0860-02 : Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type

  • ASTM F0861-94R03 : Specification for Commercial Dishwashing Racks

  • ASTM F0862-93R02 : Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids

  • ASTM F0868-02 : Classification for Laminated Composite Gasket Materials

  • ASTM F0869-01 : Terminology Relating to Athletic Shoes and Biomechanics

  • ASTM F0870-94R00 : Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements

  • ASTM F0873-84R03 : Guide for Incinerating Oil Spill Wastes at Temporary Field Locations

  • ASTM F0874-98R03 : Test Method for Temperature Measurement and Profiling for Microwave Susceptors

  • ASTM F0875-94R03 : Test Method for Evaluation of Large Area Density and Background on Office Copiers

  • ASTM F0876-04 : Specification for Crosslinked Polyethylene (PEX) Tubing

  • ASTM F0877-02A : Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems

  • ASTM F0878 : Specification For Polybuteylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing

  • ASTM F0879-02A : Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

  • ASTM F0879M-02A : Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws \[Metric\]

  • ASTM F0880-02 : Specification for Stainless Steel Socket-Set Screws

  • ASTM F0880M-02 : Specification for Stainless Steel Socket Set Screws \[Metric\]

  • ASTM F0881-94R00 : Specification for Silicone Elastomer Facial Implants

  • ASTM F0882-84R02 : Performance and Safety Specification for Cryosurgical Medical Instruments

  • ASTM F0883-04 : Performance Specification for Padlocks

  • ASTM F0884-01 : Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner

  • ASTM F0885-84R01 : Specification for Envelope Dimensions for Bronze Globe Valves NPS |n@ to 2

  • ASTM F0887-04 : Specifications for Personal Climbing Equipment

  • ASTM F0888-04 : Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner

  • ASTM F0891-04 : Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

  • ASTM F0892 : Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings

  • ASTM F0893-05 : Guide for Inspection of Amusement Rides and Devices

  • ASTM F0894-98A : Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

  • ASTM F0895-84R01E01 : Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity

  • ASTM F0897-02 : Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws

  • ASTM F0899-02 : Specification for Stainless Steels for Surgical Instruments

  • ASTM F0900-03 : Specification for Industrial and Commercial Swing Gates

  • ASTM F0901-01 : Specification for Aluminum Transmission Tower Bolts and Nuts

  • ASTM F0903-03R04 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids

  • ASTM F0904-98R03 : Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials

  • ASTM F0905-04 : Practice for Qualification of Polyethylene Saddle-Fused Joints

  • ASTM F0906-85R03 : Specification for Letters and Numerals for Ships

  • ASTM F0909-94AR01 : Terminology Relating to Printers

  • ASTM F0910-04 : Specification for Face Guards for Youth Baseball

  • ASTM F0912-04 : Specification for Alloy Steel Socket Set Screws

  • ASTM F0912M-04 : Specification for Alloy Steel Socket Set Screws \[Metric\]

  • ASTM F0913-02 : Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe

  • ASTM F0914-03 : Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments

  • ASTM F0917-91R03 : Specification for Commercial Food Waste Disposers

  • ASTM F0918-02 : Specification for Noncarbonated Mechanically Refrigerated Beverage Dispenser (Visible Product)

  • ASTM F0919-05 : Specification for Slicing Machines, Food, Electric

  • ASTM F0920-93R99 : Specification for Minimum Performance and Safety Requirements for Resuscitators Intended for Use With Humans

  • ASTM F0921-85R02 : Terminology Relating to Hemostatic Forceps

  • ASTM F0922-01 : Test Method for Motor Life Evaluation of an Electric Motorized Nozzle

  • ASTM F0923-00 : Guide to Properties of High Visibility Materials Used to Improve Individual Safety

  • ASTM F0924-90R04 : Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings

  • ASTM F0925-02 : Test Method for Resistance to Chemicals of Resilient Flooring

  • ASTM F0926-02 : Specification for Cautionary Labeling of Portable Kerosine and Diesel Containers for Consumer Use

  • ASTM F0928 : Test Methods for Edge Contour of Circular Semiconductor Wafers and Rigid Disk Substrates

  • ASTM F0934-96R03 : Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

  • ASTM F0935-00R04 : Test Method for Comparing Cover-Up Correction Media

  • ASTM F0939-05A : Practice for Selection of Release Torque Values for Alpine Ski Bindings

  • ASTM F0940-99R05 : Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding

  • ASTM F0941-99R05 : Practice for Inspection of Marine Surface Preparation and Coating Application

  • ASTM F0942-02 : Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures

  • ASTM F0944 : Specification for Properties of Adult Alpine Ski Boots

  • ASTM F0945-01 : Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials

  • ASTM F0946-85R04 : Guide for Establishing Security Seal Control and Accountability Procedures

  • ASTM F0947 : Test Method for Determining Low-Level X-Radiation Sensitivity of Photographic Films

  • ASTM F0948-94R01E01 : Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow

  • ASTM F0949-03 : Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

  • ASTM F0950 : Test Method for Measuring the Depth of Crystal Damage of a Mechanically Worked Silicon Slice Surface by Angle Polishing and Defect Etching

  • ASTM F0951 : Test Method for Determination of Radial Interstitial Oxygen Variation in Silicon Wafers

  • ASTM F0952-03 : Specification for Mixing Machines, Food, Electric

  • ASTM F0953-94R03 : Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing

  • ASTM F0955-03 : Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances

  • ASTM F0956-91R01 : Specification for Bell, Cast, Sound Signalling

  • ASTM F0957-91R01 : Specification for Gong, Sound Signaling

  • ASTM F0959-04 : Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

  • ASTM F0959M-04 : Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners \[Metric\]

  • ASTM F0960 : Specification for Medical and Surgical Suction and Drainage Systems

  • ASTM F0961-03 : Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)

  • ASTM F0962-04 : Specification for Oil Spill Response Boom Connection : Z-Connector

  • ASTM F0963-03 : Consumer Safety Specification for Toy Safety

  • ASTM F0964-02 : Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing

  • ASTM F0965-99 : Specification for Rigid Laryngoscopes for Tracheal Intubation\MHook-On Fittings for Laryngoscope Handles and Blades with Lamps

  • ASTM F0966-00 : Consumer Safety Specification for Full-Size and Non-Full-Size Baby Crib Corner Post Extensions

  • ASTM F0967-03 : Practice for Security Engineering Symbols

  • ASTM F0968-93R02E01 : Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers

  • ASTM F0969-01 : Practice for Construction of Chain-Link Tennis Court Fence

  • ASTM F0970-00 : Test Method for Static Load Limit

  • ASTM F0974-96R01 : Practice for Determination of the Color Response of an Electrostatic Copying System, Black and White Output

  • ASTM F0976-02 : Specification for Portable Kerosine and Diesel Containers for Consumer Use

  • ASTM F0977-03 : Consumer Safety Specification for Infant Walkers

  • ASTM F0978 : Test Method for Characterizing Semiconductor Deep Levels by Transient Capacitance Techniques

  • ASTM F0979-86R03 : Test Method for Hermeticity of Hybrid Microcircuit Packages Prior to Lidding

  • ASTM F0980M-96R03 : Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices \[Metric\]

  • ASTM F0981-04 : Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone

  • ASTM F0982-86R02 : Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion

  • ASTM F0983-86R05 : Practice for Permanent Marking of Orthopaedic Implant Components

  • ASTM F0985-00 : Specification for Panama Canal Pilot Platform

  • ASTM F0986-86R04 : Specification for Suction Strainer Boxes

  • ASTM F0987-04 : Specification for Portable Intermediate Flush Deck Stanchion

  • ASTM F0991M-04 : Specification for Docking/Drain Plug and Boss Assemblies \[Metric\]

  • ASTM F0992-86R01 : Specification for Valve Label Plates

  • ASTM F0993-86R01 : Specification for Valve Locking Devices

  • ASTM F0994-86R01 : Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

  • ASTM F0995-97R01 : Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer

  • ASTM F0996-98R03 : Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current\NVoltage Characteristics

  • ASTM F0997-98AR03 : Specification for Polycarbonate Resin for Medical Applications

  • ASTM F0998-04 : Specification for Centrifugal Pump, Shipboard Use

  • ASTM F1000 : Practice for Piping System Drawing Symbols (Withdrawn 2004) No Replacement 0 ASTM 0

  • ASTM F1000-95 : Practice for Piping System Drawing Symbols (Withdrawn 2004)

  • ASTM F1001 : Guide for Selection of Chemicals to Evaluate Protective Clothing Materials

  • ASTM F1001-99A : Guide for Selection of Chemicals to Evaluate Protective Clothing Materials

  • ASTM F1002 : Performance Specification for Protective Clothing for Use by Workers Exposed to SpecificMolten Substances and Related Thermal Hazards

  • ASTM F1002-05 : Performance Specification for Protective Clothing for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards

  • ASTM F1003 : Specification for Searchlights on Motor Lifeboats

  • ASTM F1003-02 : Specification for Searchlights on Motor Lifeboats

  • ASTM F1003-86(1992) : Specification for Searchlights on Motor Lifeboats

  • ASTM F1004 : Consumer Safety Specification for Expansion Gates and Expandable Enclosures

  • ASTM F1004-04 : Consumer Safety Specification for Expansion Gates and Expandable Enclosures

  • ASTM F1005 : Practice for HVAC Duct Shapes; Identification and Description of Design Configuration

  • ASTM F1005-91R02 : Practice for HVAC Duct Shapes; Identification and Description of Design Configuration

  • ASTM F1006 : Specification for Entrainment Separators for Use in Marine Piping Applications

  • ASTM F1006-86R04 : Specification for Entrainment Separators for Use in Marine Piping Applications

  • ASTM F1007 : Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application

  • ASTM F100-71(1991) : Test Method for Shrinkage Stresses in Plastic Embedment Materials Using a Photoelastic Technique for Electronic and Similar Applications (Withdrawn 1996)

  • ASTM F1007-86R02 : Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application

  • ASTM F1008-86(1993)e1 : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Salt Marshes (Withdrawn 2001)

  • ASTM F1009-86(1999) : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Offshore (Withdrawn 2002)

  • ASTM F1010-86(1993)e1 : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Bird Habitats (Withdrawn October 2001)

  • ASTM F1011 : Guide for Developing a Hazardous Materials Training Curriculum for Initial ResponsePersonnel

  • ASTM F1011-86R01 : Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel

  • ASTM F1012-86(1999) : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-the Arctic (Withdrawn 2002)

  • ASTM F1013-92 : Practice for Determining the Performance of a Liquid/Liquid Separator System Employing a Single-Pass, Constant-Rate, Non-Solids Test (Withdrawn 2001)

  • ASTM F1014 : Specification for Flashlights on Vessels

  • ASTM F1014-02 : Specification for Flashlights on Vessels

  • ASTM F1014-92 : Specification for Flashlights on Vessels

  • ASTM F1015 : Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces

  • ASTM F1015-03 : Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces

  • ASTM F1016 : Practice for Linear Tire Treadwear Data Analysis

  • ASTM F1016-93R01 : Practice for Linear Tire Treadwear Data Analysis

  • ASTM F1017 : Test Method for Testing Lateral Toe Release of Adult Alpine Ski Bindings Under Impact Loading

  • ASTM F101-71 : Specification for Composite Strip of Iron-Nickel-Cobalt Alloy and Copper for use in Electron Devices (Withdrawn 1973)

  • ASTM F1017-86(1994) : Test Method for Testing Lateral Toe Release of Adult Alpine Ski Bindings Under Impact Loading (Withdrawn 2002)

  • ASTM F1018 : Specification for Steel Emergency Gear Stowage Locker

  • ASTM F1018-87AR04 : Specification for Steel Emergency Gear Stowage Locker

  • ASTM F1019M : Specification for Steel Deck Gear Stowage Box [Metric]

  • ASTM F1019M-00 : Specification for Steel Deck Gear Stowage Box \[Metric\]

  • ASTM F1020 : Specification for Line Blind Valves for Marine Applications

  • ASTM F1020-86R01 : Specification for Line-Blind Valves for Marine Applications

  • ASTM F1021 : Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for CommercialDishwashing and Glasswashing Machines

  • ASTM F1021-95R01 : Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines

  • ASTM F1022 : Specification for Chemical Sanitizing Commercial Dishwashing Machines, Recirculated Wash, Fresh Water Rinse Type

  • ASTM F1022-95R00 : Specification for Chemical Sanitizing Commercial Dishwashing Machines, Recirculated Wash, Fresh Water Rinse Type

  • ASTM F1023 : Specification for Dispensers, Powdered Iced Tea

  • ASTM F1023-99R04 : Specification for Dispensers, Powdered Iced Tea

  • ASTM F1024 : Specification for Dispensers, Rehydrated Mashed Potato (Withdrawn 2004) No Replacement 0 ASTM 0

  • ASTM F1024-99 : Specification for Dispensers, Rehydrated Mashed Potato (Withdrawn 2004)

  • ASTM F1025 : Guide for Selection and Use of Full Encirclement Type Band Clamps for Reinforcement orRepair of Punctures or Holes in Polyethylene Gas Pressure Pipe

  • ASTM F1025-94R00 : Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe

  • ASTM F1026 : Specification for General Workmanship and Performance Measurements of HemostaticForceps

  • ASTM F1026-86R02 : Specification for General Workmanship and Performance Measurements of Hemostatic Forceps

  • ASTM F1027 : Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials andDevices

  • ASTM F102-71(1983) : Method for Spectrochemical Analysis of Emissive Carbonates by the Powder D-C Arc Technique (Withdrawn 1990)

  • ASTM F1027-86R02 : Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices

  • ASTM F1028-86(1991) : Specification for Tri-Fin Nails (Withdrawn 1997)

  • ASTM F1029 : Guide for Selection of Physical Security Measures for a Facility (Withdrawn 2004) NoReplacement

  • ASTM F1029-86(1997)e1 : Guide for Selection of Physical Security Measures for a Facility (Withdrawn 2004)

  • ASTM F1030 : Practice for Selection of Valve Operators

  • ASTM F1030-86R04 : Practice for Selection of Valve Operators

  • ASTM F1031-00 : Practice for Training the Emergency Medical Technician (Basic)

  • ASTM F1032-91 : Guide for Measuring Time-Dependant Total-Dose Effects in Semiconductor Devices Exposed to Pulsed Ionizing Radiation (Withdrawn 1994)

  • ASTM F1033 : Test Method for Comparing Lift Off Correction Media

  • ASTM F1033-00R04 : Test Method for Comparing Lift-Off Correction Media

  • ASTM F1034-86(1997) : Guide for Classifying Industrial Robots (Withdrawn 2000)

  • ASTM F1035 : Practice for Use of Rubber Cord Pie Disk to Demonstrate the Discernment Capability of aTire X ray Imaging System

  • ASTM F1035-03 : Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System

  • ASTM F1037 : Test Method for Visual Rating of Appearance of Resilient Floors After In Service Exposure toFoot Traffic

  • ASTM F103-70 : Specification for Alumina (Withdrawn 1972)

  • ASTM F1037-04 : Test Method for Visual Rating of Appearance of Resilient Floors After In-Service Exposure to Foot Traffic

  • ASTM F1038 : Test Method for Motor Life Evaluation of a Canister, Hand held, Stick, and Utility TypeVacuum Cleaner Without a Driven Agitator

  • ASTM F1038-02E01 : Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator

  • ASTM F1039 : Test Method for Measurement of Low Level X-Radiation Used in X-Ray Security Screening Systems

  • ASTM F1039-87(1993)e1 : Test Method for Measurement of Low Level X-Radiation Used in X-Ray Security Screening Systems (Withdrawn 2002)

  • ASTM F104 : Classification System for Nonmetallic Gasket Materials

  • ASTM F1040 : Specification for Filter Units, Air Conditioning Viscous Impingement and Dry Types, Replaceable

  • ASTM F1040-87R01 : Specification for Filter Units, Air Conditioning : Viscous-Impingement and Dry Types, Replaceable

  • ASTM F1041 : Guide for Squeeze Off of Polyolefin Gas Pressure Pipe and Tubing

  • ASTM F1041-02 : Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing

  • ASTM F1042 : Practice for Estimating Toner and Dispersant Usage in Copiers Utilizing Liquid Developers

  • ASTM F1042-87R04 : Practice for Estimating Toner and Dispersant Usage in Copiers Utilizing Liquid Developers

  • ASTM F1043 : Specification for Strength and Protective Coatings on Metal Industrial Chain Link FenceFramework

  • ASTM F1043-04 : Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework

  • ASTM F1044 : Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

  • ASTM F1044-05 : Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

  • ASTM F1045-04 : Performance Specification for Ice Hockey Helmets

  • ASTM F1046 : Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing

  • ASTM F1046-01 : Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing

  • ASTM F1047-04 : Specification for Frying and Braising Pans, Tilting Type

  • ASTM F1048 : Test Method for Measuring the Effective Surface Roughness of Optical Components by TotalIntegrated Scattering (Withdrawn 2003) No Replacement

  • ASTM F1048-87(1999) : Test Method for Measuring the Effective Surface Roughness of Optical Components by Total Integrated Scattering (Withdrawn 2003)

  • ASTM F1049 : Practice for Shallow Etch Pit Detection on Silicon Wafers (Withdrawn 2003 No Replacement 0 ASTM 0

  • ASTM F1049-02 : Practice for Shallow Etch Pit Detection on Silicon Wafers (Withdrawn 2003

  • ASTM F105 : Specification for Type 58 Borosilicate Sealing Glass

  • ASTM F1050 : Test Method for Determining Winding Torque and Tension of Typewriter Ribbons

  • ASTM F1050-87R00E01 : Test Method for Determining Winding Torque and Tension of Typewriter Ribbons

  • ASTM F1051 : Test Method for Comparing Multistrike Film Ribbons

  • ASTM F1051-00R04 : Test Method for Comparing Multistrike Film Ribbons

  • ASTM F1052 : Test Method for Pressure Testing Vapor Protective Ensembles

  • ASTM F1052-97R02 : Test Method for Pressure Testing Vapor Protective Ensembles

  • ASTM F1053/F1053M : Guide for Steel Hull Construction Tolerances [Metric] (Withdrawn 2003) No Replacement 0 ASTM 0

  • ASTM F1053/F1053M-94 : Guide for Steel Hull Construction Tolerances [Metric] (Withdrawn 2003)

  • ASTM F1053/F1053M : Guide for Steel Hull Construction Tolerances \[Metric\]

  • ASTM F1054 : Specification for Conical Fittings (Withdrawn 2005) Replaced by ISO5356 0 ASTM 0

  • ASTM F1054-01 : Specification for Conical Fittings (Withdrawn 2005)

  • ASTM F1055 : Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter ControlledPolyethylene Pipe and Tubing

  • ASTM F1055-98E01 : Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing

  • ASTM F1056 : Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe orTubing and Fittings

  • ASTM F1056-04 : Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings

  • ASTM F1057-87R00 : Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

  • ASTM F1058 : Specification for Wrought 40Cobalt 20Chromium 16Iron 15Nickel 7Molybdenum Alloy Wireand Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)

  • ASTM F1058-02 : Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)

  • ASTM F1059-87(1992) : Practice for Calculating the Contrast and Threshold Sensitivity of a Positive Photoresist (Withdrawn 1996)

  • ASTM F106 : Specification for Brazing Filler Metals for Electron Devices

  • ASTM F1060 : Test Method for Thermal Protective Performance of Materials for Protective Clothing for HotSurface Contact

  • ASTM F1060-05 : Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact

  • ASTM F1061 : Specification for Ski Binding Test Devices

  • ASTM F1061-97R03 : Specification for Ski Binding Test Devices

  • ASTM F1062 : Test Method for Verification of Ski Binding Test Devices

  • ASTM F1062-97R03 : Test Method for Verification of Ski Binding Test Devices

  • ASTM F1063 : Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems

  • ASTM F1063-04 : Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems

  • ASTM F1064 : Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/BootSystems in Rental Applications

  • ASTM F1064-03 : Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications

  • ASTM F1065-89 : Practice for the Inspection of Incomplete Alpine Ski/Boot/Binding Systems in Rental Applications (Withdrawn 1994)

  • ASTM F1066 : Specification for Vinyl Composition Floor Tile

  • ASTM F1066-04 : Specification for Vinyl Composition Floor Tile

  • ASTM F1067-92 : Test Method for Determining the Performance of a Petroleum Product Filter Cartridge Using a Single-Pass Constant Rate Procedure (Withdrawn 2001)

  • ASTM F1068 : Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

  • ASTM F1068-90R03 : Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

  • ASTM F1069 : Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

  • ASTM F10-69(1986) : Specification for Miniature Electron Tube Leads (Withdrawn 1992)

  • ASTM F1069-87R04 : Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

  • ASTM F1070 : Specification for Doors, Non Tight, for Marine Use

  • ASTM F1070-87R04 : Specification for Doors, Non-Tight, for Marine Use

  • ASTM F1071 : Specification for Expanded Metal Bulkhead Panels

  • ASTM F1071-94R99 : Specification for Expanded-Metal Bulkhead Panels

  • ASTM F1072 : Specification for Expanded Metal Doors

  • ASTM F1072-94R99 : Specification for Expanded-Metal Doors

  • ASTM F1073 : Specification for Door Fittings, for Watertight/Gastight/Airtight, Weathertight, and Non TightDoors, for Marine Use

  • ASTM F1073-87R99 : Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use

  • ASTM F1074 : Specification for Cleats, Welded Horn Type

  • ASTM F1074-87R02 : Specification for Cleats, Welded Horn Type

  • ASTM F1075 : Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self Contained

  • ASTM F1075-97R04 : Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained

  • ASTM F1076 : Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube

  • ASTM F1076-87R04 : Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube

  • ASTM F1077 : Guide for Selection of Committee F16 Fastener Specifications

  • ASTM F107-72 : Specification for Boron-Deoxidized Copper in Drought Forms for Electron Devices (Withdrawn 1976)

  • ASTM F1077-95AR02 : Guide for Selection of Committee F16 Fastener Specifications

  • ASTM F1078 : Terminology for Surgical Scissors/Inserted and Non Inserted Blades

  • ASTM F1078-87R02 : Terminology for Surgical Scissors\MInserted and Non-Inserted Blades

  • ASTM F1079 : Specification for Inserted and Noninserted Surgical Scissors

  • ASTM F1079-87R02 : Specification for Inserted and Noninserted Surgical Scissors

  • ASTM F1080 : Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer

  • ASTM F1080-93R02 : Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer

  • ASTM F1081-97R03E01 : Specification for Competition Wrestling Mats

  • ASTM F1082 : Practice for Tires Determining Precision for Test Method Standards (Withdrawn 2006) NoReplacement

  • ASTM F1082-00(2000) : Practice for Tires-Determining Precision for Test Method Standards (Withdrawn 2006)

  • ASTM F1082-00R00 : Practice for Tires\MDetermining Precision for Test Method Standards

  • ASTM F1083 : Specification for Pipe, Steel, Hot Dipped Zinc Coated (Galvanized) Welded, for FenceStructures

  • ASTM F1083-04 : Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

  • ASTM F1084 : Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment

  • ASTM F1084-90R02 : Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment

  • ASTM F1085-03A : Specification for Mattress and Box Springs for Use in Berths in Marine Vessels

  • ASTM F1086 : Guide for Structures and Responsibilities of Emergency Medical Services SystemsOrganizations

  • ASTM F1086-94R02 : Guide for Structures and Responsibilities of Emergency Medical Services Systems Organizations

  • ASTM F1087 : Test Method for Linear Dimensional Stability of a Gasket Material to Moisture

  • ASTM F1087-02 : Test Method for Linear Dimensional Stability of a Gasket Material to Moisture

  • ASTM F1088 : Specification for Beta Tricalcium Phosphate for Surgical Implantation

  • ASTM F1088-04A : Specification for Beta-Tricalcium Phosphate for Surgical Implantation

  • ASTM F108-88 : Test Method for Resistivity of Silicon Epitaxial Layers by the Three-Probe Voltage Breakdown Method (Withdrawn 1993)

  • ASTM F1089 : Test Method for Corrosion of Surgical Instruments

  • ASTM F1089-02 : Test Method for Corrosion of Surgical Instruments

  • ASTM F109 : Terminology Relating to Surface Imperfections on Ceramics

  • ASTM F1090 : Classification for Bank and Mercantile Vault Construction

  • ASTM F1090-87R97E01 : Classification for Bank and Mercantile Vault Construction

  • ASTM F1091 : Specification for Wrought Cobalt 20 Chromium 15 Tungsten 10 Nickel Alloy Surgical FixationWire (UNS R30605)

  • ASTM F1091-02 : Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire [UNS R30605]

  • ASTM F1092 : Specification for Fiberglass (GRP) Pultruded Open Weather Storm and Guard, Square RailingSystems

  • ASTM F1092-04 : Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems

  • ASTM F1093 : Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom

  • ASTM F1093-99 : Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom

  • ASTM F1094 : Test Methods for Microbiological Monitoring of Water Used for Processing Electron andMicroelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic BagMethod

  • ASTM F1094-87R05 : Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method

  • ASTM F1095-88(1994)E01 : Test Method for Rapid Enumeration of Bacteria in Electronics-Grade Purified Water Systems by Direct-Count Epifluorescence Microscopy (Withdrawn 2001)

  • ASTM F1096-87 : Method for Measuring Mosfet Saturated Threshold Voltage (Withdrawn 1992)

  • ASTM F1097 : Specification for Mortar, Refractory (High Temperature, Air Setting)

  • ASTM F1097-91R01 : Specification for Mortar, Refractory (High-Temperature, Air-Setting)

  • ASTM F1098 : Specification for Envelope Dimensions for Butterfly Valves NPS 2 to 24

  • ASTM F1098-87R04 : Specification for Envelope Dimensions for Butterfly Valves\MNPS 2 to 24

  • ASTM F1099M : Specification for Rat Guards, Ship’s (Metric)

  • ASTM F1099M-98R05 : Specification for Rat Guards, Ship’s (Metric)

  • ASTM F110 : Test Method for Thickness of Epitaxial or Diffused Layers in Silicon by the Angle Lappingand Staining Technique (Withdrawn 2003) No Replacement

  • ASTM F1100 : Specification for Ventilators Intended for Use in Critical Care (Withdrawn 2004) NoReplacement

  • ASTM F110-00a : Test Method for Thickness of Epitaxial or Diffused Layers in Silicon by the Angle Lapping and Staining Technique (Withdrawn 2003)

  • ASTM F1100-90(1997) : Specification for Ventilators Intended for Use in Critical Care (Withdrawn 2004)

  • ASTM F1101 : Specification for Ventilators Intended for Use During Anesthesia

  • ASTM F1101-90R03E01 : Specification for Ventilators Intended for Use During Anesthesia

  • ASTM F1102-94 : Guide for Preparation of Use and Care Booklets for Residential Resilient Nontextile Floor Coverings (Withdrawn 2000)

  • ASTM F1103-93 : Test Method for Materials Response to Flame–45 Degree (For Aerospace Vehicles) (Withdrawn 1998)

  • ASTM F1104 : Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, forStorage Stability Testing

  • ASTM F1104-02 : Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing

  • ASTM F1105-03 : Test Method for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing

  • ASTM F1106 : Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

  • ASTM F1106-87R98 : Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

  • ASTM F1107 : Terminology Relating to Snowboarding

  • ASTM F1107-04 : Terminology Relating to Snowboarding

  • ASTM F1108 : Specification for Titanium 6Aluminum 4Vanadium Alloy Castings for Surgical Implants (UNSR56406)

  • ASTM F1108-04 : Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)

  • ASTM F1109-87 : Specification for Porous Composites of Polytetrafluoroethylene and Carbon for Surgical Implant Applications (Withdrawn 1993)

  • ASTM F111 : Practice for Determining Barium Yield, Getter Gas Content, and Getter Sorption Capacity forBarium Flash Getters

  • ASTM F1110 : Test Method for Sandwich Corrosion Test

  • ASTM F1110-02 : Test Method for Sandwich Corrosion Test

  • ASTM F1111 : Test Method for Corrosion of Low Embrittling Cadmium Plate by Aircraft MaintenanceChemicals

  • ASTM F1111-02 : Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals

  • ASTM F1112 : Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of InflationPressure

  • ASTM F1112-00 : Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure

  • ASTM F1113 : Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (BarnacleElectrode)

  • ASTM F1113-87R05E01 : Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)

  • ASTM F1114 : Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type WaterDriven Rotary Spray

  • ASTM F1114-94R00 : Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray

  • ASTM F1115 : Test Method for Determining the Carbon Dioxide Loss of Beverage Containers

  • ASTM F1115-95R01 : Test Method for Determining the Carbon Dioxide Loss of Beverage Containers

  • ASTM F1116 : Test Method for Determining Dielectric Strength of Dielectric Footwear

  • ASTM F1116-03 : Test Method for Determining Dielectric Strength of Dielectric Footwear

  • ASTM F1117 : Specification for Dielectric Footwear

  • ASTM F1117-03 : Specification for Dielectric Footwear

  • ASTM F1118 : Specification for National Air Medical Transport Units Resources Catalog

  • ASTM F1118-91R03 : Specification for National Air Medical Transport Units Resources Catalog

  • ASTM F1119-91 : Specification for Rotary Wing Basic Life Support Transport Units (Withdrawn 2000)

  • ASTM F112 : Test Method for Sealability of Enveloped Gaskets

  • ASTM F1120 : Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

  • ASTM F1120-87R04 : Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

  • ASTM F1121 : Specification for International Shore Connections for Marine Fire Applications

  • ASTM F1121-87R04 : Specification for International Shore Connections for Marine Fire Applications

  • ASTM F1122 : Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)

  • ASTM F1122-04 : Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)

  • ASTM F1123 : Specification for Non Metallic Expansion Joints

  • ASTM F1123-87R04 : Specification for Non-Metallic Expansion Joints

  • ASTM F1124-91 : Specification for Rotary Wing Advanced Life Support Transport Units (Withdrawn 2000)

  • ASTM F1125 : Termninology of Image Quality in Impact Printing Systems

  • ASTM F1125-87R00 : Terminology of Image Quality in Impact Printing Systems

  • ASTM F1126 : Specification for Food Cutters (Electric)

  • ASTM F1126-03 : Specification for Food Cutters, (Electric)

  • ASTM F1127 : Guide for Containment by Emergency Response Personnel of Hazardous Material Spills

  • ASTM F1127-01 : Guide for Containment by Emergency Response Personnel of Hazardous Material Spills

  • ASTM F1128-88 : Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using Salt Impingement Method (Withdrawn 1996)

  • ASTM F1129 : Guide for Using Aquious Foams to Control the Vapor Hazard from Immiscible Volatile Liquids

  • ASTM F1129-01 : Guide for Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids

  • ASTM F1130 : Practice for Inspecting the Coating System of a Ship

  • ASTM F1130-99R05 : Practice for Inspecting the Coating System of a Ship

  • ASTM F1131-88 : Practice for Inspecting the Coating System of a Ship’s Tanks and Voids (Withdrawn 1993)

  • ASTM F1132-88 : Practice for Inspecting the Coating System of a Ship’s Deck and Deck Machinery (Withdrawn 1993)

  • ASTM F1133-88 : Practice for Inspecting the Coating System of a Ship’s Underwater Hull and Boottop During Drydocking (Withdrawn 1993)

  • ASTM F1134 : Specification for Insulation Resistance Monitor for Shipboard Electrical Motors andGenerators

  • ASTM F1134-94R02 : Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators

  • ASTM F1135 : Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating forFasteners

  • ASTM F1135-99 : Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners

  • ASTM F1136 : Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

  • ASTM F1136-04 : Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

  • ASTM F1136M : Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric]

  • ASTM F1136M-04 : Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners \[Metric\]

  • ASTM F1137 : Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings forFasteners

  • ASTM F1137-00 : Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners

  • ASTM F1138 : Specification for Spray Shields for Mechanical Joints

  • ASTM F113-82(1991) : Method for Stiffness Testing of Wire for Electron Devices and Lamps (Withdrawn 1995)

  • ASTM F1138-98R03 : Specification for Spray Shields for Mechanical Joints

  • ASTM F1139 : Specification for Steam Traps and Drains

  • ASTM F1139-88R04 : Specification for Steam Traps and Drains

  • ASTM F1140 : Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages forMedical Applications

  • ASTM F1140-00 : Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages for Medical Applications

  • ASTM F1141-93R04 : Specification for Wallcovering

  • ASTM F1142 : Specification for Manhole Cover Assembly Bolted, Semi Flush, Oiltight and Watertight

  • ASTM F1142-98R03 : Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight

  • ASTM F1143 : Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

  • ASTM F1143-98R03 : Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

  • ASTM F1144 : Specification for Manhole Cover Assembly, Bolted, Semi Flush, Oiltight and Watertight, Hinged

  • ASTM F1144-98R03 : Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged

  • ASTM F1145 : Specification for Turnbuckles, Swaged, Welded, Forged

  • ASTM F1145-05 : Specification for Turnbuckles, Swaged, Welded, Forged

  • ASTM F114-69 : Specification for Bone Screw Threads (Withdrawn 1980)

  • ASTM F1146-91 : Specification for Rotary Wing Specialized Medical Transport Units (Withdrawn 2000)

  • ASTM F1147 : Test Method for Tension Testing of Calcium Phosphate and Metal Coatings

  • ASTM F1147-05 : Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings

  • ASTM F1148 : Consumer Safety Performance Specification for Home Playground Equipment

  • ASTM F1148-03 : Consumer Safety Performance Specification for Home Playground Equipment

  • ASTM F1149 : Practice for Qualifications, Responsibilities, and Authority of Individuals and InstitutionsProviding Medical Direction of Emergency Medical Services

  • ASTM F1149-93R03 : Practice for Qualifications, Responsibilities, and Authority of Individuals and Institutions Providing Medical Direction of Emergency Medical Services

  • ASTM F1150 : Specification for Commercial Food Waste Pulper and Waterpress Assembly

  • ASTM F1150-88R00 : Specification for Commercial Food Waste Pulper and Waterpress Assembly

  • ASTM F1151 : Test Method for Determining Variations in Hardness of Film Ribbon Pancakes

  • ASTM F1151-88R03 : Test Method for Determining Variations in Hardness of Film Ribbon Pancakes

  • ASTM F1152 : Test Method for Dimensions of Notches on Silicon Wafers (Withdrawn 2003) NoReplacement

  • ASTM F1152-02 : Test Method for Dimensions of Notches on Silicon Wafers (Withdrawn 2003)

  • ASTM F1153 : Test Method for Characterization of Metal-Oxide-Silicon (MOS) Structures by Capacitance-Voltage Measurements

  • ASTM F1153-92(2002) : Test Method for Characterization of Metal-Oxide-Silicon (MOS) Structures by Capacitance-Voltage Measurements (Withdrawn 2003)

  • ASTM F1154 : Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of ChemicalProtective Suit Ensembles

  • ASTM F1154-99AR04 : Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of Chemical-Protective Suit Ensembles

  • ASTM F1155-98R04 : Practice for Selection and Application of Piping System Materials

  • ASTM F115-69 : Specification for Bone Screw Heads (Withdrawn 1980)

  • ASTM F1156-94 : Terminology Relating to Product Counterfeit Protection Systems (Withdrawn 2001)

  • ASTM F1157 : Practice for Classifying the Relative Performance of the Physical Properties of Security Seals

  • ASTM F1157-04 : Practice for Classifying the Relative Performance of the Physical Properties of Security Seals

  • ASTM F1158 : Guide for Inspection and Evaluation of Tampering of Security Seals

  • ASTM F1158-94R01 : Guide for Inspection and Evaluation of Tampering of Security Seals

  • ASTM F1159 : Practice for Design and Manufacture of Patron Directed, Arti?cialClimbing Walls, Dry Slide,

  • ASTM F1159-03A : Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures

  • ASTM F116 : Specification for Medical Screwdriver Bits

  • ASTM F1160 : Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and MetallicMedical and Composite Calcium Phosphate/Metallic Coatings

  • ASTM F1160-05 : Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings

  • ASTM F1161-88(1994) : Specification for Minimum Performance and Safety Requirements for Components and Systems of Anesthesia Gas Machines (Withdrawn 2000)

  • ASTM F1162 : Specification for Pole Vault Landing Systems

  • ASTM F1162-02 : Specification for Pole Vault Landing Systems

  • ASTM F1163 : Specification for Protective Headgear Used in Horse Sports and Horseback Riding

  • ASTM F1163-04A : Specification for Protective Headgear Used in Horse Sports and Horseback Riding

  • ASTM F1164 : Test Method for Evaluation of Transparent Plastics Exposed to Accelerated WeatheringCombined with Biaxial Stress

  • ASTM F1164-97R03 : Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress

  • ASTM F1165 : Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts

  • ASTM F1165-98R04 : Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts

  • ASTM F1166 : Practice for Human Engineering Design for Marine Systems, Equipment and Facilities

  • ASTM F11-66(1968) : Recommended Practice for Testing Electron Tube Parts by Means of a Reference Planar Diode (Withdrawn 1973)

  • ASTM F1166-95AR00 : Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities

  • ASTM F1167-92 : Terminology Relating to Aseptic Packaging (Withdrawn 1993)

  • ASTM F1168-88(1994) : Guide for Use in the Establishment of Thermal Processes for Foods Packaged in Flexible Containers (Withdrawn 2000)

  • ASTM F1169 : Specification for Full Size Baby Crib

  • ASTM F1169-03 : Specification for Full-Size Baby Crib

  • ASTM F1170-88(1993) : Practice for Determining the Performance of a Filter Medium Using Water and Siliceous Particles (Withdrawn 2002)

  • ASTM F1172 : Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type

  • ASTM F1172-88R04 : Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type

  • ASTM F1173 : Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for MarineApplications

  • ASTM F1173-01 : Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications

  • ASTM F1174 : Practice for Using a Personal Computer Printer as a Test Instrument

  • ASTM F1174-01 : Practice for Using a Personal Computer Printer as a Test Instrument

  • ASTM F1175 : Practice for Using the Computer Impact Print Out Unit as a Test Instrument for ManifoldComparison

  • ASTM F1175-88R01 : Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison

  • ASTM F1176 : Practice for Design and Installation of Underground Thermoplastic Irrigation Systems WithMaximum Working Pressure of 125 psi

  • ASTM F1176-01E01 : Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi

  • ASTM F1177 : Terminology Relating to Emergency Medical Services

  • ASTM F1177-02 : Terminology Relating to Emergency Medical Services

  • ASTM F1178-01 : Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture

  • ASTM F1179 : Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds withStuds

  • ASTM F117-95(1999)e1 : Test Method for Driving Torque of Medical Bone Screws (Withdrawn 2001)

  • ASTM F1179-88R02 : Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs

  • ASTM F118 : Definitions of Terms Relating to Gaskets

  • ASTM F1181 : Test Method for Measuring Binocular Disparity in Transparent Parts

  • ASTM F1181-96R03 : Test Method for Measuring Binocular Disparity in Transparent Parts

  • ASTM F1182-90R01 : Specification for Anodes, Sacrificial Zinc Alloy

  • ASTM F1183 : Specification for Aluminum Alloy Chain Link Fence Fabric

  • ASTM F1183-96R02 : Specification for Aluminum Alloy Chain Link Fence Fabric

  • ASTM F1184 : Specification for Industrial and Commercial Horizontal Slide Gates

  • ASTM F1184-03 : Specification for Industrial and Commercial Horizontal Slide Gates

  • ASTM F1185 : Specification for Composition of Hydroxylapatite for Surgical Implants

  • ASTM F1185-03 : Specification for Composition of Hydroxylapatite for Surgical Implants

  • ASTM F1186 : Classification System for Chemicals According to Functional Groups

  • ASTM F1186-03 : Classification System for Chemicals According to Functional Groups

  • ASTM F1187-91 : Specification for Fixed Wing Specialized Medical Transport Units (Withdrawn 2000)

  • ASTM F1188 : Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption withShort Baseline (Withdrawn 2003) No Replacement

  • ASTM F1188-02 : Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption with Short Baseline (Withdrawn 2003)

  • ASTM F1189-88 : Test Method for Using Computer-Assisted Infrared Spectrophotometry to Measure the Interstitial Oxygen Content of Silicon Slices Polished on Both Sides (Withdrawn 1993)

  • ASTM F119 : Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)

  • ASTM F1190 : Guide for Neutron Irradiation of Unbiased Electronic Components

  • ASTM F1190-99R05 : Guide for Neutron Irradiation of Unbiased Electronic Components

  • ASTM F1191-88 : Guide for the Radiation Testing of Semiconductor Memories (Withdrawn 1993)

  • ASTM F1192 : Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy IonIrradiation of Semiconductor Devices

  • ASTM F1192-00 : Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices

  • ASTM F1193 : Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

  • ASTM F1193-04B : Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements

  • ASTM F1194 : Guide for Documenting the Results of Chemical Permeation Testing of Materials Used inProtective Clothing

  • ASTM F1194-99R05 : Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing

  • ASTM F1195 : Specification for Rigid Laryngoscopes for Tracheal Intubation Hook on Fittings forFiberilluminated Blades and Handles

  • ASTM F1195-99 : Specification for Rigid Laryngoscopes for Tracheal Intubation\MHook on Fittings for Fiberilluminated Blades and Handles

  • ASTM F1196 : Specification for Sliding Watertight Door Assemblies

  • ASTM F1196-00 : Specification for Sliding Watertight Door Assemblies

  • ASTM F1197 : Specification for Sliding Watertight Door Control Systems

  • ASTM F1197-00 : Specification for Sliding Watertight Door Control Systems

  • ASTM F1198 : Guide for Shipboard Fire Detection Systems

  • ASTM F1198-92R02 : Guide for Shipboard Fire Detection Systems

  • ASTM F1199 : Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150psig and 150°F Maximum)

  • ASTM F1199-88R04 : Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150|SDF Maximum)

  • ASTM F1200 : Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)

  • ASTM F1200-88R04 : Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150|SDF)

  • ASTM F1201 : Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F

  • ASTM F1201-88R04 : Specification for Fluid Conditioner Fittings in Piping Applications Above 0|SDF

  • ASTM F1202 : An American National Standard Standard Specification for Washing Machines, Heat Sanitizing,

  • ASTM F1202-97 : Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type

  • ASTM F1203 : An American National Standard Standard Specification for Washing Machines/Pot, Pan, and Utensil,

  • ASTM F1203-97 : Specification for Washing Machines-Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type

  • ASTM F1204 : Specification for Anesthesia Reservoir Bags

  • ASTM F1204-88(1998) : Specification for Anesthesia Reservoir Bags (Withdrawn 2002)

  • ASTM F1205 : Specification for Anesthesia Breathing Tubes

  • ASTM F1205-88R99 : Specification for Anesthesia Breathing Tubes

  • ASTM F1206 : Test Method for Evaluating Color Image Output from Color Printers and Copiers

  • ASTM F1206-94R00 : Test Method for Evaluating Color Image Output from Color Printers and Copiers

  • ASTM F1207-89 : Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems (Withdrawn 1997)

  • ASTM F1207M : Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in ActiveElectrical Systems [Metric]

  • ASTM F1207M-96R02 : Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems \[Metric\]

  • ASTM F1208 : Specification for Minimum Performance and Safety Requirements for Anesthesia BreathingSystems

  • ASTM F120-88 : Practices for Determination of the Concentration of Impurities in Single Crystal Semiconductor Materials by Infrared Absorption Spectroscopy (Withdrawn 1993)

  • ASTM F1208-89R05 : Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems

  • ASTM F1209-89R99 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs

  • ASTM F1210-89R99 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

  • ASTM F1211 : Specification for Semiconductor Device Passivation Opening Layouts

  • ASTM F1211-89R01 : Specification for Semiconductor Device Passivation Opening Layouts

  • ASTM F1212 : Test Method for Thermal Stability Testing of Gallium Arsenide Wafers

  • ASTM F1212-89R02 : Test Method for Thermal Stability Testing of Gallium Arsenide Wafers

  • ASTM F1213-89 : Test Method for Determining the Particle Contamination and Media Migration Characteristics of Liquid Filters by Optical Microscopy (Withdrawn 1998)

  • ASTM F1214-89 : Test Method for Water Solubility in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 1998)

  • ASTM F1215-89 : Test Method for Determining the Initial Efficiency of a Flatsheet Filter Medium in an Airflow Using Latex Spheres (Withdrawn 1998)

  • ASTM F1216 : An American National Standard Standard Practice for Rehabilitation of Existing Pipelines and Conduitsby theInversion and Curing of a Resin-Impregnated Tube1, 2

  • ASTM F1216-03 : Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

  • ASTM F1217-03 : Specification for Cooker, Steam

  • ASTM F1218 : Specification for Bronchoscopes (Rigid)

  • ASTM F121-83 : Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption (Withdrawn 1990)

  • ASTM F1218-89R99 : Specification for Bronchoscopes (Rigid)

  • ASTM F1219 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Initial andDetailed Assessment (Withdrawn 2006) No Replacement

  • ASTM F1219-00 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Initial and Detailed Assessment (Withdrawn 2006)

  • ASTM F1220 : Guide for Emergency Medical Services System (EMSS) Telecommunications

  • ASTM F1220-95R01 : Guide for Emergency Medical Services System (EMSS) Telecommunications

  • ASTM F1221 : Guide for Interagency Information Exchange

  • ASTM F1221-89R01 : Guide for Interagency Information Exchange

  • ASTM F1222-89(1994) : Classification for Hardware for Wood Fencing (Withdrawn 2000)

  • ASTM F1223 : Test Method for Determination of Total Knee Replacement Constraint

  • ASTM F1223-05 : Test Method for Determination of Total Knee Replacement Constraint

  • ASTM F1224 : Guide for Providing System Evaluation for Emergency Medical Services

  • ASTM F1224-89R04E01 : Guide for Providing System Evaluation for Emergency Medical Services

  • ASTM F1225 : Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges

  • ASTM F1225-99R03 : Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges

  • ASTM F1226-89(1994)e1 : Test Method for Calibration of Liquid-Borne Particle Counters for Submicrometer Particle Sizing (Withdrawn 2002)

  • ASTM F122-74(1985) : Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption (Withdrawn 1990)

  • ASTM F1227-89(1999) : Test Method for Total Mass Loss of Materials and Condensation of Outgassed Volatiles on Microelectronics-Related Substrates (Withdrawn 2000)

  • ASTM F1228-89(1994)E01 : Test Method for Oxidizable (Organic) Carbon on Wafer Surfaces (By Persulfate) (Withdrawn 2001)

  • ASTM F1229 : Guide for the Qualification and Training of EMS Air Medical Patient Care Providers

  • ASTM F1229-01 : Guide for the Qualification and Training of EMS Air Medical Patient Care Providers

  • ASTM F1230-89 : Specification for Minimum Performance Requirements for Emergency Medical Service (EMS) Ground Vehicles (Withdrawn 1997)

  • ASTM F1231-89R99 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks

  • ASTM F1232 : Practice for Generating a Test Pattern for Single Pass Film Ribbons

  • ASTM F1232-98R03 : Practice for Generating a Test Pattern for Single-Pass Film Ribbons

  • ASTM F1233 : Test Method for Security Glazing Materials And Systems

  • ASTM F1233-98R04 : Test Method for Security Glazing Materials And Systems

  • ASTM F1234-93 : Specification for Protective Coatings on Steel Framework for Fences (Withdrawn 1995)

  • ASTM F1235-03 : Consumer Safety Specification for Portable Hook-On Chairs

  • ASTM F1236 : Guide for Visual Inspection of Electrical Protective Rubber Products

  • ASTM F1236-96R01 : Guide for Visual Inspection of Electrical Protective Rubber Products

  • ASTM F1237 : Specification for Commercial Dishwashing Machines, Multiple Tank, Continuous OvalConveyor Type, Heat Sanitizing

  • ASTM F1237-04 : Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing

  • ASTM F1238 : Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications

  • ASTM F1238-95R03 : Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications

  • ASTM F1239 : Test Methods for Oxygen Precipitation Characterization of Silicon Wafers by Measurement ofInterstitial Oxygen Reduction (Withdrawn 2003) No Replacement

  • ASTM F1239-02 : Test Methods for Oxygen Precipitation Characterization of Silicon Wafers by Measurement of Interstitial Oxygen Reduction (Withdrawn 2003)

  • ASTM F123-91 : Test Method for Substitutional Atomic Carbon Content of Silicon by Infrared Absorption (Withdrawn 1992)

  • ASTM F124- : Test Method for Coincident Current Memory Core Stacks (Withdrawn 1976)

  • ASTM F1240 : Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces Accordingto Slip Resistance Test Results

  • ASTM F1240-01 : Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces According to Slip Resistance Test Results

  • ASTM F1241 : Terminology of Silicon Technology

  • ASTM F1241-95(2000) : Terminology of Silicon Technology (Withdrawn 2003)

  • ASTM F1242 : Specification for Cuffed and Uncuffed Tracheal Tubes

  • ASTM F1242-96e1 : Specification for Cuffed and Uncuffed Tracheal Tubes (Withdrawn 2002)

  • ASTM F1243 : Specification for Tracheal Tube Connectors

  • ASTM F1243-89(1995) : Specification for Tracheal Tube Connectors (Withdrawn 2002)

  • ASTM F1244 : Specification for Berths, Marine

  • ASTM F1244-89R04 : Specification for Berths, Marine

  • ASTM F1245 : Specification for Faucets, Single and Double, Compression and Self Closing Type, Shipboard

  • ASTM F1245-89R01 : Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

  • ASTM F1246 : Specification for Electrically Powered Home Care Ventilators, Part 1 Positive PressureVentilators and Ventilator Circuits

  • ASTM F1246-91R99 : Specification for Electrically Powered Home Care Ventilators, Part 1\MPositive-Pressure Ventilators and Ventilator Circuits

  • ASTM F1247 : Specification for Intrusion Resistant Generic Vault Structures

  • ASTM F1247-89R05 : Specification for Intrusion Resistant Generic Vault Structures

  • ASTM F1248 : Test Method for Determination of Environmental Stress Crack Resistance (ESCR) ofPolyethylene Pipe

  • ASTM F1248-96R02E01 : Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe

  • ASTM F1249 : Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using aModulated Infrared Sensor

  • ASTM F1249-01 : Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor

  • ASTM F125- : Method of Test for Non-Metallic Magnetic Cores to be Used in a Linear Select Memory with a Non-Symetrical Ratio Operation Under Full Switching Conditions (Withdrawn 1976)

  • ASTM F1250 : Safety Specification for Stationary Exercise Bicycles

  • ASTM F1250-00 : Safety Specification for Stationary Exercise Bicycles

  • ASTM F1251 : Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices

  • ASTM F1251-89R03 : Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices

  • ASTM F1252-89R02 : Test Method for Measuring Optical Reflectivity of Transparent Materials

  • ASTM F1253-90 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Secondary Assessment (Withdrawn 1999)

  • ASTM F1254 : Practice for Performance of Prehospital Manual Defibrillation

  • ASTM F1254-90R01 : Practice for Performance of Prehospital Manual Defibrillation

  • ASTM F1255 : Practice for Performance of Prehospital Automated Defibrillation

  • ASTM F1255-90R02 : Practice for Performance of Prehospital Automated Defibrillation

  • ASTM F1256 : Guide for Selection and Practice of Emergency Medical Services Instructor for Basic LifeSupport/Emergency Medical Technician (BLS/EMT) Training Programs

  • ASTM F1256-90R02 : Guide for Selection and Practice of Emergency Medical Services Instructor for Basic Life Support/Emergency Medical Technician (BLS/EMT) Training Programs

  • ASTM F1257 : Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced LifeSupport/Emergency Medical Technician (ALS/EMT) Training Programs

  • ASTM F1257-90R02 : Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Life Support/Emergency Medical Technician (ALS/EMT) Training Programs

  • ASTM F1258 : Practice for Emergency Medical Dispatch

  • ASTM F1258-95R01 : Practice for Emergency Medical Dispatch

  • ASTM F1259-89 : Guide for Design of Flat, Straight-Line Test Structures for Detecting Metallization Open-Circuit or Resistance-Increase Failure Due to Electromigration

  • ASTM F1259M : Guide for Design of Flat, Straight Line Test Structures for Detecting Metallization OpenCircuit or Resistance Increase Failure Due to Electromigration [Metric]

  • ASTM F1259M-96R03 : Guide for Design of Flat, Straight-Line Test Structures for Detecting Metallization Open-Circuit or Resistance-Increase Failure Due to Electromigration \[Metric\]

  • ASTM F126- : Definitions of Terms Relating to Which Relate to the Use and Testing of Ferrite Memory Cores and Memory Core Arrays (Withdrawn 1976)

  • ASTM F1260-89 : Test Method for Estimating Electromigration Median Time-To-Failure and Sigma of Integrated Circuit Metallizations

  • ASTM F1260M : Test Method for Estimating Electromigration Median Time to Failure and Sigma ofIntegrated Circuit Metallizations [Metric]

  • ASTM F1260M-96R03 : Test Method for Estimating Electromigration Median Time-To-Failure and Sigma of Integrated Circuit Metallizations \[Metric\]

  • ASTM F1261M : Test Method for Determining the Average Electrical Width of a Straight, Thin Film Metal Line[Metric]

  • ASTM F1261M-96R03 : Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line \[Metric\]

  • ASTM F1262M : Guide for Transient Radiation Upset Threshold of Digital Integrated Circuits

  • ASTM F1262M-95R02 : Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits [Metric]

  • ASTM F1263 : Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts

  • ASTM F1263-99R05 : Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts

  • ASTM F1264 : Specification and Test Methods for Intramedullary Fixation Devices

  • ASTM F1264-03 : Specification and Test Methods for Intramedullary Fixation Devices

  • ASTM F1265 : Test Method for Resistance to Impact for Resilient Floor Tile

  • ASTM F1265-03A : Test Method for Resistance to Impact for Resilient Floor Tile

  • ASTM F1266 : Performance Specification for Cerebral Stereotactic Instruments

  • ASTM F1266-89R02 : Performance Specification for Cerebral Stereotactic Instruments

  • ASTM F1267 : Specification for Metal, Expanded, Steel

  • ASTM F1267-01 : Specification for Metal, Expanded, Steel

  • ASTM F1268 : Guide for Establishing and Operating a Public Information, Education, and RelationsProgram for Emergency Medical Service Systems

  • ASTM F12-68(1978) : Specification for Mica Bridges for Electron Tubes (Withdrawn 1984)

  • ASTM F1268-90R03 : Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems

  • ASTM F1269-89R01 : Test Methods for Destructive Shear Testing of Ball Bonds

  • ASTM F1270 : Practice for Preparing and Locating Emergency Muster Lists

  • ASTM F1270-97R02 : Practice for Preparing and Locating Emergency Muster Lists

  • ASTM F1271 : Specification for Spill Valves for Use in Marine Tank Liquid Overpressure ProtectionsApplications

  • ASTM F1271-90R01 : Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications

  • ASTM F1273 : Specification for Tank Vent Flame Arresters

  • ASTM F1273-91R02 : Specification for Tank Vent Flame Arresters

  • ASTM F1274-91 : Specification for Fixed Wing Advanced Life Support Transport Units (Withdrawn 2000)

  • ASTM F1275 : Test Method for Performance of Griddles

  • ASTM F1275-03E01 : Test Method for Performance of Griddles

  • ASTM F1276 : Test Method for Creep Relaxation of Laminated Composite Gasket Materials

  • ASTM F1276-99R03 : Test Method for Creep Relaxation of Laminated Composite Gasket Materials

  • ASTM F1277 : Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials byIon Selective Electrode Technique

  • ASTM F1277-02 : Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique

  • ASTM F1278 : Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment

  • ASTM F127-84 : Definitions of Terms Relating to Relating to Photomasking Technology for Microelectronics (Withdrawn 1993)

  • ASTM F1278-96R03 : Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment

  • ASTM F1279-90R99 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Permeable Surfaces

  • ASTM F1280 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater andOther Inland Environments, Impermeable Surfaces

  • ASTM F1280-90R99 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Impermeable Surfaces

  • ASTM F1281 : Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX AL PEX) Pressure Pipe

  • ASTM F1281-03 : Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe

  • ASTM F1282 : Specification for Polyethylene/Aluminum/Polyethylene (PE AL PE) Composite Pressure Pipe

  • ASTM F1282-03 : Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

  • ASTM F1283-91 : Specification for Fixed Wing Specialized Medical Transport Units (Withdrawn 2000)

  • ASTM F1284-04 : Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems

  • ASTM F1285 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient ExaminationTechniques

  • ASTM F1285-90R03 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Examination Techniques

  • ASTM F1286 : Guide for Development and Operation of Level 1 Pediatric Trauma Facilities

  • ASTM F128-66(1983) : Methods of Testing Sleeves and Tubing for Electron Tube Cathodes (Withdrawn 1992)

  • ASTM F1286-90R02 : Guide for Development and Operation of Level 1 Pediatric Trauma Facilities

  • ASTM F1287 : Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care

  • ASTM F1287-90R02 : Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care

  • ASTM F1288 : Guide for Planning for and Response to a Multiple Casualty Incident

  • ASTM F1288-90R03 : Guide for Planning for and Response to a Multiple Casualty Incident

  • ASTM F1289-95 : Practice for Development of Literature Pertaining to the Selection of Residential Resilient Floor Coverings (Withdrawn 2000)

  • ASTM F129 : Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than FabricType

  • ASTM F1290 : Practice for Electrofusion Joining Polyolefin Pipe and Fittings

  • ASTM F1290-98AR04 : Practice for Electrofusion Joining Polyolefin Pipe and Fittings

  • ASTM F1291 : Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin

  • ASTM F1291-04 : Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin

  • ASTM F1292-04 : Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment

  • ASTM F1293-91A : Test Method for Evaluation of Coated Transparent Plastics Subjected to Cyclic Flexural/Thermal Fatigue (Withdrawn 2000)

  • ASTM F1294 : Terminology Relating to Automatic Identification Hard Copy Printing Systems

  • ASTM F1294-97AR03 : Terminology Relating to Automatic Identification Hard Copy Printing Systems

  • ASTM F1295 : Specification for Wrought Titanium 6 Aluminum 7 Niobium Alloy for Surgical ImplantApplications (UNS R56700)

  • ASTM F1295-05 : Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)

  • ASTM F1296 : Guide for Evaluating Chemical Protective Clothing

  • ASTM F1296-03 : Guide for Evaluating Chemical Protective Clothing

  • ASTM F1297 : Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment

  • ASTM F1297-90R05 : Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment

  • ASTM F1298 : Specification for Flexible, Expansion Type Ball Joints for Marine Applications

  • ASTM F1298-90R01 : Specification for Flexible, Expansion-Type Ball Joints for Marine Applications

  • ASTM F1299-90 : Specification for Food Service Equipment Hoods for Cooking Appliances (Withdrawn 1997)

  • ASTM F1301 : Practice for Labeling Chemical Protective Clothing

  • ASTM F1301-90R01 : Practice for Labeling Chemical Protective Clothing

  • ASTM F1302-90 : Practice for Abbreviated Marking of Plastic Consumer Products (Withdrawn 1991)

  • ASTM F1303 : Specification for Sheet Vinyl Floor Covering with Backing

  • ASTM F1303-04 : Specification for Sheet Vinyl Floor Covering with Backing

  • ASTM F1304-03 : Test Method for Deflection of Resilient Floor Tile

  • ASTM F1305 : Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses

  • ASTM F1305-94R02 : Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses

  • ASTM F1306 : Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

  • ASTM F1306-90R02 : Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

  • ASTM F1307 : Test Method for Oxygen Transmission Rate Through Dry Packages Using a CoulometricSensor

  • ASTM F1307-02 : Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor

  • ASTM F1307-90 : Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor (Withdrawn 2001)

  • ASTM F1308 : Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for FoodProducts

  • ASTM F1308-98R03 : Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products

  • ASTM F1309 : Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

  • ASTM F1309-98R03 : Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

  • ASTM F1310-90 : Specification for 65-Gallon Dispensing Tank (Withdrawn 1996)

  • ASTM F1311 : Specification for Large Diameter Fabricated Carbon Steel Flanges

  • ASTM F1311-90R01 : Specification for Large\NDiameter Fabricated Carbon Steel Flanges

  • ASTM F1312 : Specification for Brick, Insulating, High Temperature, Fire Clay

  • ASTM F1312-90R02 : Specification for Brick, Insulating, High Temperature, Fire Clay

  • ASTM F1313 : Specification for Volatile N Nitrosamine Levels in Rubber Nipples on Pacifiers

  • ASTM F1313-90R99 : Specification for Volatile -Nitrosamine Levels in Rubber Nipples on Pacifiers

  • ASTM F1314 : Specification for Wrought Nitrogen Strengthened 22 Chromium 13 Nickel 5 Manganese2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

  • ASTM F1314-01 : Specification for Wrought Nitrogen Strengthened 22 Chromium \N 13 Nickel \N 5 Manganese \N 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

  • ASTM F1315 : Test Method for Density of a Sheet Gasket Material

  • ASTM F1315-00 : Test Method for Density of a Sheet Gasket Material

  • ASTM F1316 : Test Method for Measuring the Transmissivity of Transparent Parts

  • ASTM F1316-90R02 : Test Method for Measuring the Transmissivity of Transparent Parts

  • ASTM F1317 : Test Method for Calibration of Microwave Ovens

  • ASTM F1317-98R02 : Test Method for Calibration of Microwave Ovens

  • ASTM F1318 : Test Method for Determination of Productivity Using Electrostatic Copy Machines withVarious Configurations

  • ASTM F1318-90R03 : Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations

  • ASTM F1319 : Test Method for Determination of Abrasion and Smudge Resistance of Images Producedfrom Business Copy Products (Crockmeter Method)

  • ASTM F1319-94R00 : Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)

  • ASTM F1320 : Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a TestInstrument

  • ASTM F1320-01 : Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument

  • ASTM F1321 : Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) toDetermine the Light Ship Displacement and Centers of Gravity of a Vessel

  • ASTM F1321-92R04 : Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel

  • ASTM F1322 : Guide for Selection of Shipboard Incinerators

  • ASTM F1322-90R04 : Guide for Selection of Shipboard Incinerators

  • ASTM F1323-01 : Specification for Shipboard Incinerators

  • ASTM F1325 : Specification for Stainless Steel Suture Needle Holders General Workmanship Requirementsand Corresponding Test Methods

  • ASTM F1325-91R02 : Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods

  • ASTM F1326 : Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners

  • ASTM F1326-02 : Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners

  • ASTM F1327 : Terminology Relating to Barrier Materials for Medical Packaging

  • ASTM F132-70(1981) : Method of Testing Nonmetallic Magnetic Cores to be Used in a Coincident Current Memory with a Two-To-One Selection Ratio Operating Under Full Switching Conditions (Withdrawn 1987)

  • ASTM F1327-98 : Terminology Relating to Barrier Materials for Medical Packaging

  • ASTM F1328 : Guide for Training Emergency Medical Technician (Basic) to Prepare Patients for MedicalTransportation (Withdrawn 2006) No Replacement

  • ASTM F1328-00 : Guide for Training Emergency Medical Technician (Basic) to Prepare Patients for Medical Transportation (Withdrawn 2006)

  • ASTM F1329 : Guide for Training the Emergency Medical Technician (Basic) in Basic Anatomy andPhysiology (Withdrawn 2006) No Replacement

  • ASTM F1329-00 : Guide for Training the Emergency Medical Technician (Basic) in Basic Anatomy and Physiology (Withdrawn 2006)

  • ASTM F1330 : Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe

  • ASTM F1330-91R01 : Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe

  • ASTM F1331 : Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electricaland Electronic Spaces

  • ASTM F1331-91R02 : Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces

  • ASTM F1332 : Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement toIEEE/ASTM SI 10)

  • ASTM F1332-99R05 : Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/SI 10)

  • ASTM F1333 : Specification for Construction of Fire and Foam Station Cabinets

  • ASTM F1333-91R02 : Specification for Construction of Fire and Foam Station Cabinets

  • ASTM F1334-02 : Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners

  • ASTM F1335 : Specification for Pressure Rated Composite Pipe and Fittings for Elevated TemperatureService

  • ASTM F1335-04 : Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service

  • ASTM F1336-02 : Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

  • ASTM F1337-91R01 : Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities

  • ASTM F1338 : Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance andMinimum Scope of Assembly

  • ASTM F1338-91R02 : Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly

  • ASTM F1339 : Guide for Organization and Operation of Emergency Medical Services Systems

  • ASTM F1339-92R03 : Guide for Organization and Operation of Emergency Medical Services Systems

  • ASTM F1340-92 : Test Method for Determining the Mean Interface Trap Density of Mosfets by Charge-Pumping (Withdrawn 1997)

  • ASTM F1341 : Specification for Unalloyed Titanium Wire UNS R50250, UNS R50400, UNS R50550, UNSR50700, for Surgical Implant Applications

  • ASTM F1341-99 : Specification for Unalloyed Titanium Wire UNS R50250, UNS R50400, UNS R50550, UNS R50700, for Surgical Implant Applications

  • ASTM F1342 : Test Method for Protective Clothing Material Resistance to Puncture

  • ASTM F1342-05 : Test Method for Protective Clothing Material Resistance to Puncture

  • ASTM F1343 : Specification for Anesthetic Gas Scavenging Systems Transfer and Receiving Systems

  • ASTM F1343-02 : Specification for Anesthetic Gas Scavenging Systems\MTransfer and Receiving Systems

  • ASTM F1343-91 : Specification for Anesthetic Equipment-Scavenging Systems for Anesthetic Gases (Withdrawn 2000)

  • ASTM F1344 : Specification for Rubber Floor Tile

  • ASTM F1344-04 : Specification for Rubber Floor Tile

  • ASTM F1345 : Specification for Zinc 5% Aluminum Mischmetal Alloy Coated Steel Chain Link Fence Fabric

  • ASTM F1345-96R03 : Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

  • ASTM F1346 : Performance Specification for Safety Covers and Labeling Requirements for All Covers forSwimming Pools, Spas and Hot Tubs

  • ASTM F1346-91R03 : Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs

  • ASTM F1347 : Specification for Manually Operated Fueling Hose Reels

  • ASTM F1347-91R01 : Specification for Manually Operated Fueling Hose Reels

  • ASTM F1348/F1348M : Specification for Pneumatic Rotary Descaling Machines

  • ASTM F1348/F1348M-91R02 : Specification for Pneumatic Rotary Descaling Machines

  • ASTM F134-85(1990) : Test Methods for Determining Hermeticity of Electron Devices with a Helium Mass Spectrometer Leak Detector (Withdrawn 1996)

  • ASTM F1349 : Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from MicrowaveSusceptors

  • ASTM F1349-98R03 : Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors

  • ASTM F1350 : Specification for Wrought 18 Chromium 14 Nickel 2.5 Molybdenum Stainless Steel SurgicalFixation Wire (UNS S31673)

  • ASTM F1350-02 : Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)

  • ASTM F1351 : Practice for Determination of the Effect of Hard Creasing Paper on Images Produced byBusiness Imaging Systems

  • ASTM F1351-96R02 : Practice for Determination of the Effect of Hard Creasing Paper on Images Produced by Business Imaging Systems

  • ASTM F1352-02 : Guide for Fixed Blade Broadhead Performance and Safety Standards

  • ASTM F1353-92 : Specification for Frozen Finely Ground Chicken (Withdrawn 1995)

  • ASTM F1354-92 : Specification for Frozen Precooked Imitation Crab Products (Withdrawn 1995)

  • ASTM F1355 : Guide for Irradiation of Fresh Agricultural Produce as a Phytosanitary Treatment

  • ASTM F1355-99 : Guide for Irradiation of Fresh Fruits as a Phytosanitary Treatment

  • ASTM F1356 : An American National Standard Standard Practice for Irradiation of Fresh and Frozen Red Meat and

  • ASTM F1356-99 : Guide for Irradiation of Fresh and Frozen Red Meat and Poultry to Control Pathogens and Other Microorganisms

  • ASTM F1357 : Specification for Articulating Total Wrist Implants

  • ASTM F135-76(1991) : Test Method for Embedment Stress Caused by Casting Compounds on Glass-Encased Electronic Components (Withdrawn 1997)

  • ASTM F1357-99R04 : Specification for Articulating Total Wrist Implants

  • ASTM F1358 : Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing NotDesignated Primarily for Flame Resistance

  • ASTM F1358-00R05 : Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance

  • ASTM F1359 : Test Method for Liquid Penetration Resistance of Protective Clothing or ProtectiveEnsembles Under a Shower Spray While on a Mannequin

  • ASTM F1359-99AR04 : Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin

  • ASTM F136 : Specification for Wrought Titanium 6 Aluminum 4 Vanadium ELI (Extra Low Interstitial) Alloyfor Surgical Implant Applications (UNS R56401)

  • ASTM F1360 : Specification for Ovens, Microwave, Electric

  • ASTM F1360-93R99 : Specification for Ovens, Microwave, Electric

  • ASTM F1361-99E01 : Test Method for Performance of Open Deep Fat Fryers

  • ASTM F1362 : Test Method for Shear Strength and Shear Modulus of Aerospace Glazing InterlayerMaterials

  • ASTM F1362-97R03 : Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials

  • ASTM F1363-02 : Guide for Reduction of Risk of Injury for Archery Overdraws

  • ASTM F1364 : Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of anInterferometric Laser Imaging Nondestructive Tire Inspection System

  • ASTM F1364-03 : Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System

  • ASTM F1365 : Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints WhichUse Flexible Elastomeric Seals

  • ASTM F13-65(1971) : Specification for Disk Cathode Assemblies (Withdrawn 1979)

  • ASTM F1365-91R99E01 : Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals

  • ASTM F1366 : Test Method for Measuring Oxygen Concentration in Heavily Doped Silicon Substrates bySecondary Ion Mass Spectrometry (Withdrawn 2003) No Replacement

  • ASTM F1366-92(2002) : Test Method for Measuring Oxygen Concentration in Heavily Doped Silicon Substrates by Secondary Ion Mass Spectrometry (Withdrawn 2003)

  • ASTM F1367 : Specification for Chromium Sputtering Targets for Thin Film Applications

  • ASTM F1367-98R03 : Specification for Chromium Sputtering Targets for Thin Film Applications

  • ASTM F1368-92 : Test Method for Determining the Sieving Performance of a Fluid Filter Medium Employing an Aqueous Suspension of Microspheres and a Spectrophotometer (Withdrawn 2001)

  • ASTM F1369-93a : Specification for Heaters, Convection, Steam and Hot Water (Withdrawn 2002)

  • ASTM F137 : Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus

  • ASTM F1370 : Specification for Pressure Reducing Valves for Water Systems, Shipboard

  • ASTM F1370-92R05 : Specification for Pressure-Reducing Valves for Water Systems, Shipboard

  • ASTM F1371 : Specification for Vegetable Peeling Machines, Electric

  • ASTM F1371-04 : Specification for Vegetable Peeling Machines, Electric

  • ASTM F1372 : Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Conditionfor Gas Distribution System Components

  • ASTM F1372-93R05 : Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components

  • ASTM F1373 : Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution SystemComponents

  • ASTM F1373-93R05 : Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components

  • ASTM F1374 : Test Method for Ionic/Organic Extractables of Internal Surfaces IC/GC/FTIR for GasDistribution System Components

  • ASTM F1374-92R05 : Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components

  • ASTM F1375 : Test Method for Energy Dispersive X Ray Spectrometer (EDX) Analysis of Metallic SurfaceCondition for Gas Distribution System Components

  • ASTM F1375-92R05 : Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components

  • ASTM F1376 : Guide for Metallurgical Analysis for Gas Distribution System Components

  • ASTM F1376-92R05 : Guide for Metallurgical Analysis for Gas Distribution System Components

  • ASTM F1377 : Specification for Cobalt 28Chromium 6Molybdenum Powder for Coating of OrthopedicImplants (UNS R30075)

  • ASTM F1377-04 : Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)

  • ASTM F1378-04 : Specification for Shoulder Prostheses

  • ASTM F1379 : Terminology Relating to Barbed Tape

  • ASTM F1379-95R03 : Terminology Relating to Barbed Tape

  • ASTM F138 : Specification for Wrought 18 Chromium 14 Nickel 2.5 Molybdenum Stainless Steel Bar andWire for Surgical Implants (UNS S31673)

  • ASTM F1380 : Specification for Metal Insert Fittings for Polybutylene (PB) Tubing

  • ASTM F1380-95AR02E01 : Specification for Metal Insert Fittings for Polybutylene (PB) Tubing

  • ASTM F1381 : Guide for Planning and Developing 9 1 1 Enhanced Telephone Systems

  • ASTM F1381-92R03 : Guide for Planning and Developing 9-1-1 Enhanced Telephone Systems

  • ASTM F1382 : Specification for Search and Rescue Computer Software Information Exchange (Withdrawn2002) No Replacement

  • ASTM F1382-92(1997) : Specification for Search and Rescue Computer Software Information Exchange (Withdrawn 2002)

  • ASTM F1383-99A : Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Intermittent Contact

  • ASTM F1384-93 : Practice for Fire Tests of Marine Joiner Doors Assembly (Withdrawn 2002)

  • ASTM F1385 : Practice for Platforms in Cargo Tanks

  • ASTM F1385-01 : Practice for Platforms in Cargo Tanks

  • ASTM F1386 : Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding

  • ASTM F1386-92R04 : Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding

  • ASTM F1387 : Specification for Performance of Piping and Tubing Mechanically Attached Fittings

  • ASTM F1387-99R05 : Specification for Performance of Piping and Tubing Mechanically Attached Fittings

  • ASTM F1388 : Test Method for Generation Lifetime and Generation Velocity of Silicon Material byCapacitance Time Measurements of Metal Oxide Silicon (MOS) Capacitors (Withdrawn 2003) NoReplacement

  • ASTM F1388-92(2000) : Test Method for Generation Lifetime and Generation Velocity of Silicon Material by Capacitance-Time Measurements of Metal-Oxide-Silicon (MOS) Capacitors (Withdrawn 2003)

  • ASTM F1389 : Test Methods for Photoluminescence Analysis of Single Crystal Silicon for III-V Impurities

  • ASTM F1389-00 : Test Methods for Photoluminescence Analysis of Single Crystal Silicon for III-V Impurities (Withdrawn 2003)

  • ASTM F139 : Specification for Wrought 18 Chromium 14 Nickel 2.5 Molybdenum Stainless Steel Sheet andStrip for Surgical Implants (UNS S31673)

  • ASTM F1390 : Test Method for Measuring Warp on Silicon Wafers by Automated Noncontact Scanning(Withdrawn 2003) No Replacement

  • ASTM F1390-02 : Test Method for Measuring Warp on Silicon Wafers by Automated Noncontact Scanning (Withdrawn 2003)

  • ASTM F1391 : Test Method for Substitutional Atomic Carbon Content of Silicon by Infrared Absorption(Withdrawn 2003) No Replacement

  • ASTM F1391-93(2000) : Test Method for Substitutional Atomic Carbon Content of Silicon by Infrared Absorption (Withdrawn 2003)

  • ASTM F1392 : Test Method for Determining Net Carrier Density Profiles in Silicon Wafers by CapacitanceVoltage Measurements With a Mercury Probe (Withdrawn 2003) No Replacement

  • ASTM F1392-02 : Test Method for Determining Net Carrier Density Profiles in Silicon Wafers by Capacitance-Voltage Measurements With a Mercury Probe (Withdrawn 2003)

  • ASTM F1393 : Test Method for Determining Net Carrier Density in Silicon Wafers by Miller FeedbackProfiler Measurements With a Mercury Probe (Withdrawn 2003) No Replacement

  • ASTM F1393-02 : Test Method for Determining Net Carrier Density in Silicon Wafers by Miller Feedback Profiler Measurements With a Mercury Probe (Withdrawn 2003)

  • ASTM F1394 : Test Method for Determination of Particle Contribution from Gas Distribution System Valves

  • ASTM F1394-92R05 : Test Method for Determination of Particle Contribution from Gas Distribution System Valves

  • ASTM F1396 : Test Method for Determination of Oxygen Contribution by Gas Distribution SystemComponents

  • ASTM F1396-93R05 : Test Method for Determination of Oxygen Contribution by Gas Distribution System Components

  • ASTM F1397 : Test Method for Determination of Moisture Contribution by Gas Distribution SystemComponents

  • ASTM F1397-93R05 : Test Method for Determination of Moisture Contribution by Gas Distribution System Components

  • ASTM F1398 : Test Method for Determination of Total Hydrocarbon Contribution by Gas DistributionSystem Components

  • ASTM F1398-93R05 : Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components

  • ASTM F14 : Practice for Making and Testing Reference Glass Metal Bead Seal

  • ASTM F140 : Practice for Making Reference Glass Metal Butt Seals and Testing for ExpansionCharacteristics by Polarimetric Methods

  • ASTM F1404 : Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique

  • ASTM F1404-92R99 : Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique

  • ASTM F1405 : Test Method for Determining the Dynamic Thermal Response of Direct Thermal ImagingProducts Atlantek Method

  • ASTM F1405-98R02 : Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products\MAtlantek Method

  • ASTM F1406-92 : Specification for Breaded, Cooked, Frozen Chicken Patties and Nuggets (Withdrawn 1995)

  • ASTM F1407 : Test Method for Resistance of Chemical Protective Clothing Materials to Liquid PermeationPermeation Cup Method

  • ASTM F1407-99A : Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation\MPermeation Cup Method

  • ASTM F1408 : Practice for Subcutaneous Screening Test for Implant Materials

  • ASTM F1408-97R02E01 : Practice for Subcutaneous Screening Test for Implant Materials

  • ASTM F1409 : Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets

  • ASTM F1409-00R05 : Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets

  • ASTM F141 : Terminology Relating to Resilient Floor Coverings

  • ASTM F1410 : Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners

  • ASTM F1410-98R03 : Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners

  • ASTM F1411-01 : Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use

  • ASTM F1412-01E01 : Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

  • ASTM F1413 : Guide for Oil Spill Dispersant Application Equipment : Boom and Nozzle Systems

  • ASTM F1413-92R99 : Guide for Oil Spill Dispersant Application Equipment : Boom and Nozzle Systems

  • ASTM F1414 : Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing

  • ASTM F1414-04 : Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing

  • ASTM F1415 : Specification for Pulse Oximeters (Withdrawn 2005) Replaced by ISO9919 0 ASTM 0

  • ASTM F1415-92(2000) : Specification for Pulse Oximeters (Withdrawn 2005)

  • ASTM F1416 : Guide for Selection of Time Temperature Indicators

  • ASTM F1416-96R03 : Guide for Selection of Time-Temperature Indicators

  • ASTM F1417-92R98 : Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air

  • ASTM F1418 : Guide for Training the Emergency Medical Technician (Basic) in Roles and Responsibilities

  • ASTM F1418-01 : Guide for Training the Emergency Medical Technician (Basic) in Roles and Responsibilities

  • ASTM F1419 : Guide for Training the Emergency Medical Technician (Basic) To Manage Shock (Withdrawn2006) No Replacement

  • ASTM F1419-00 : Guide for Training the Emergency Medical Technician (Basic) To Manage Shock (Withdrawn 2006)

  • ASTM F142 : Test Method for Indentation of Resilient Floor Tiles (McBurney Test)

  • ASTM F1420 : Guide for Training the Emergency Medical Technician (Basic) to Perform PatientManagement Techniques

  • ASTM F1420-01 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Management Techniques

  • ASTM F1421 : Guide for Training the Emergency Medical Technician (Basic) To Manage ObstetricalEmergencies

  • ASTM F1421-01 : Guide for Training the Emergency Medical Technician (Basic) To Manage Obstetrical Emergencies

  • ASTM F1422 : Guide for Using the Incident Command System Framework in Managing Civilian Search andRescue Operations

  • ASTM F1422-92R99 : Guide for Using the Incident Command System Framework in Managing Civilian Search and Rescue Operations

  • ASTM F1423 : Practice for Determination of the Quality of Monochrome Images Produced from Non ImpactPersonal Computer Printers

  • ASTM F1423-97R02 : Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers

  • ASTM F1424 : Test Method for Estimating Toner Usage in Full Color Copiers Utilizing Dry Mono or DualComponent Toners

  • ASTM F1424-92R01 : Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono-or-Dual-Component Toners

  • ASTM F1425 : Test Method for Determining the Tribocharge of Two Component Developer Materials

  • ASTM F1425-92R01 : Test Method for Determining the Tribocharge of Two-Component Developer Materials

  • ASTM F1426 : Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use

  • ASTM F1426-94R03 : Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use

  • ASTM F1427 : Consumer Safety Specification for Bunk Beds

  • ASTM F1427-04E01 : Consumer Safety Specification for Bunk Beds

  • ASTM F1428 : Specification for Aluminum Particle Filled Basecoat/Organic or Inorganic Topcoat, CorrosionProtective Coatings for Fasteners

  • ASTM F1428-92R99 : Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

  • ASTM F1429 : Test Method for Assembly Force of Plastic Underground Conduit Joints That Use FlexibleElastomeric Seals Located in the Bell

  • ASTM F1429-99 : Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell

  • ASTM F1430 : Test Method for Acoustic Emission Testing of Insulated and Non Insulated Aerial PersonnelDevices with Supplemental Load Handling Attachments

  • ASTM F1430-03 : Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments

  • ASTM F1431 : Specification for Water Trap for Diesel Exhaust

  • ASTM F1431-92R04 : Specification for Water Trap for Diesel Exhaust

  • ASTM F1433 : Specification for Mechanically Refrigerated Shipboard Air Conditioner

  • ASTM F1433-97R04 : Specification for Mechanically Refrigerated Shipboard Air Conditioner

  • ASTM F1434 : Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer

  • ASTM F1434-97R02 : Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer

  • ASTM F1435-04 : Specification for Designation of the Balance Point Location for Archery Arrows

  • ASTM F1436-02 : Guide for Center Serving Diameter Dimensions for Archery Bow Strings

  • ASTM F1437 : Practice for Inclined Cargo Tank Ladders

  • ASTM F1437-01 : Practice for Inclined Cargo Tank Ladders

  • ASTM F143-73(1978) : Method of Test for Thickness of Epitaxial Layers of Silicon by Measurement of Stacking Fault Dimension (Withdrawn 1985)

  • ASTM F1438 : Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy forGas Distribution System Components

  • ASTM F1438-93R05 : Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components

  • ASTM F1439 : Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of ImplantMaterials

  • ASTM F1439-03 : Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials

  • ASTM F144 : Practice for Making Reference Glass Metal Sandwich Seal and Testing for ExpansionCharacteristics by Polarimetric Methods

  • ASTM F1440 : Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty FemoralComponents Without Torsion

  • ASTM F1440-92R02 : Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion

  • ASTM F1441 : Specification for Soft Tissue Expander Devices

  • ASTM F1441-03 : Specification for Soft-Tissue Expander Devices

  • ASTM F1442 : Practice for Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance

  • ASTM F1442-92R03 : Practice for Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance

  • ASTM F1443 : Practice for Using 0.008 in. (0.203 mm) Aperture Reflectometers as Test Instruments forMeasuring Visual Image Quality of Business Copy Images

  • ASTM F1443-93R03 : Practice for Using 0.008-in. (0.203-mm) Aperture Reflectometers as Test Instruments for Measuring Visual Image Quality of Business Copy Images

  • ASTM F1444 : Test Method for Determining Dynamic Thermal Response of Direct Thermal Paper LabelPrinter Method

  • ASTM F1444-00R04 : Test Method for Determining Dynamic Thermal Response of Direct Thermal Paper-Label Printer Method

  • ASTM F1445 : Test Method for Determining Static Thermal Sensitivity of Direct Thermal Paper

  • ASTM F1445-00R04 : Test Method for Determining Static Thermal Sensitivity of Direct Thermal Media

  • ASTM F1446 : Test Methods for Equipment and Procedures Used in Evaluating the PerformanceCharacteristics of Protective Headgear

  • ASTM F1446-04 : Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear

  • ASTM F1447-02 : Specification for Helmets Used in Recreational Bicycling or Roller Skating

  • ASTM F1448 : Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration,

  • ASTM F1448-93AR99 : Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents

  • ASTM F1449 : Guide for Care and Maintenance of Flame, Thermally and Arc Resistant Clothing

  • ASTM F1449-01 : Guide for Care and Maintenance of Flame, Thermal and Arc Resistant Clothing

  • ASTM F145 : Practice for Evaluating Flat Faced Gasketed Joint Assemblies

  • ASTM F1450-05 : Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities

  • ASTM F1451 : Test Method for Measuring Sori on Silicon Wafers by Automated Noncontact Scanning(Withdrawn 2003) No Replacement

  • ASTM F1451-92(1999) : Test Method for Measuring Sori on Silicon Wafers by Automated Noncontact Scanning (Withdrawn 2003)

  • ASTM F1452 : Specification for Minimum Performance and Safety Requirements for Anesthetic GasMonitors Replaced by ANSI/ISO21647

  • ASTM F1452-01 : Specification for Minimum Performance and Safety Requirements for Anesthetic Gas Monitors

  • ASTM F1453 : Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care

  • ASTM F1453-92R03 : Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care

  • ASTM F1454 : Practice for Comparing Correctable Film Ribbons

  • ASTM F1454-99R03 : Practice for Comparing Correctable Film Ribbons

  • ASTM F1455 : Guide for Selection of Structural Details for Ship Construction

  • ASTM F1455-92R01 : Guide for Selection of Structural Details for Ship Construction

  • ASTM F1456 : Specification for Minimum Performance and Safety Requirements for Capnometers Replacedby ANSI/ISO21647

  • ASTM F1456-01 : Specification for Minimum Performance and Safety Requirements for Capnometers

  • ASTM F1457 : Terminology Relating to Laser Printers

  • ASTM F1457-94BR01 : Terminology Relating to Laser Printers

  • ASTM F1458 : Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices

  • ASTM F1458-04 : Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices

  • ASTM F1459 : Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen GasEmbrittlement (HGE)

  • ASTM F1459-93R98E01 : Test Method for Determination of the Susceptibility of Metallic Materials to Gaseous Hydrogen Embrittlement

  • ASTM F146 : Test Methods for Fluid Resistance of Gasket Materials

  • ASTM F1460 : Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems

  • ASTM F1460-93R99 : Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems

  • ASTM F1461 : Practice for Chemical Protective Clothing Program

  • ASTM F1461-93R05E01 : Practice for Chemical Protective Clothing Program

  • ASTM F1462 : Specification for Oxygen Analyzers

  • ASTM F1462-93 : Specification for Oxygen Analyzers (Withdrawn 2002)

  • ASTM F1463 : Specification for Alarm Signals in Medical Equipment Used in Anesthesia and RespiratoryCare (Withdrawn 2006) Replaced by ISO/IEC

  • ASTM F1463-93R99 : Specification for Alarm Signals in Medical Equipment Used in Anesthesia and Respiratory Care

  • ASTM F1464 : Specification for Oxygen Concentrators for Domiciliary Use

  • ASTM F1464-93R99 : Specification for Oxygen Concentrators for Domiciliary Use

  • ASTM F1465 : Guide for Selection of Security Control Systems

  • ASTM F1465-03 : Guide for Selection of Security Control Systems

  • ASTM F1466 : Specification for Iron Nickel Cobalt Alloys for Metal to Ceramic Sealing Applications

  • ASTM F1466-99R05 : Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications

  • ASTM F1467 : Guide for Use of an X Ray Tester ([approximate]10 keV Photons) in Ionizing RadiationEffects Testing of Semiconductor Devices and Microcircuits

  • ASTM F1467-99R05 : Guide for Use of an X-Ray Tester (|mF10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits

  • ASTM F1468 : Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search andScreening

  • ASTM F1468-04A : Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening

  • ASTM F1469 : Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment forNondestructive Testing

  • ASTM F1469-99 : Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing

  • ASTM F147 : Test Method for Flexibility of Non Metallic Gasket Materials

  • ASTM F1470 : Guide for Fastener Sampling for Specified Mechanical Properties and PerformanceInspection

  • ASTM F1470-02 : Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

  • ASTM F1471 : Test Method for Air Cleaning Performance of a High Efficiency Particulate Air Filter System

  • ASTM F1471-93R01 : Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air Filter System

  • ASTM F1472 : Specification for Wrought Titanium 6Aluminum 4Vanadium Alloy for Surgical ImplantApplications (UNS R56400)

  • ASTM F1472-02A : Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)

  • ASTM F1473 : An American National Standard Test Method for Notch Tensile Test to Measure the

  • ASTM F1473-01E01 : Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

  • ASTM F1474 : Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe(Withdrawn 2003) No Replacement

  • ASTM F1474-98(2001) : Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe (Withdrawn 2003)

  • ASTM F1475-93 : Specification for Dispensing Tanks, 250 Liter Maximum (Withdrawn 1998)

  • ASTM F1476-01 : Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

  • ASTM F1478 : Test Method for Determination of Abrasion Resistance of Images Produced from Copiers andPrinters (Taber Method)

  • ASTM F1478-95R00 : Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)

  • ASTM F1479 : Terminology Relating to Microwave Food Packaging

  • ASTM F1479-98R03 : Terminology Relating to Microwave Food Packaging

  • ASTM F148 : Test Method for Binder Durability of Cork Composition Gasket Materials

  • ASTM F1480-93 : Guide for Preparing a Chart for Presenting Residential Resilient Floor Covering Information to the Consumer (Withdrawn 2000)

  • ASTM F1481 : Guide for Ecological Considerations for the Use of Bioremediation in Oil Spill Response Sandand Gravel Beaches

  • ASTM F1481-94R01 : Guide for Ecological Considerations for the Use of Bioremediation in Oil Spill Response\MSand and Gravel Beaches

  • ASTM F1482 : Practice for Installation and Preparation of Panel Type Underlayments to Receive ResilientFlooring

  • ASTM F1482-04 : Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring

  • ASTM F1483 : Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe

  • ASTM F1483-98 : Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe

  • ASTM F1484 : Test Methods for Performance of Steam Cookers

  • ASTM F1484-05 : Test Methods for Performance of Steam Cookers

  • ASTM F1486 : Practice for Determination of Abrasion and Smudge Resistance of Images Produced fromOffice Products (GA CAT Method)

  • ASTM F1486-96R02 : Practice for Determination of Abrasion and Smudge Resistance of Images Produced from Office Products (GA-CAT Method)

  • ASTM F1487 : Consumer Safety Performance Specification for Playground Equipment for Public Use

  • ASTM F1487-05 : Consumer Safety Performance Specification for Playground Equipment for Public Use

  • ASTM F1488-03 : Specification for Coextruded Composite Pipe

  • ASTM F1489 : Guide for Performance of Patient Assessment by the Emergency Medical Technician(Paramedic) (Withdrawn 2002) No Replacement

  • ASTM F1489-93 : Guide for Performance of Patient Assessment by the Emergency Medical Technician (Paramedic) (Withdrawn 2002)

  • ASTM F149 : Terminology Relating to Optical Character Recognition

  • ASTM F1490 : Terminology Relating to Search and Rescue

  • ASTM F1490-04A : Terminology Relating to Search and Rescue

  • ASTM F1491 : Specification for An Avalanche Beacon Frequency

  • ASTM F1491-93R02 : Specification for An Avalanche Beacon Frequency

  • ASTM F1492-00 : Specifications for Helmets Used in Skateboarding and Trick Roller Skating

  • ASTM F1493 : Guide for Financing and Financial Accountability of Medical Transportation Systems

  • ASTM F1493-93R03 : Guide for Financing and Financial Accountability of Medical Transportation Systems

  • ASTM F1494 : Terminology Relating to Protective Clothing

  • ASTM F1494-03 : Terminology Relating to Protective Clothing

  • ASTM F1495 : Specification for Combination Oven Electric or Gas Fired

  • ASTM F1495-99 : Specification for Combination Oven Electric or Gas Fired

  • ASTM F1496 : Test Method for Performance of Convection Ovens

  • ASTM F1496-99 : Test Method for Performance of Convection Ovens

  • ASTM F1497 : Test Method for Determining Laser Resistance of the Shaft of Tracheal Tubes

  • ASTM F1497-99A : Test Method for Determining Laser Resistance of the Shaft of Tracheal Tubes

  • ASTM F1498-00E01 : Specification for Taper Pipe Threads 60|SD for Thermoplastic Pipe and Fittings

  • ASTM F1499 : Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

  • ASTM F1499-01 : Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

  • ASTM F15 : Specification for Iron Nickel Cobalt Sealing Alloy

  • ASTM F150 : Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring

  • ASTM F1500 : Test Method for Quantitating Non UV Absorbing Nonvolatile Extractables from MicrowaveSusceptors Utilizing Solvents as Food Simulants

  • ASTM F1500-98R03 : Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants

  • ASTM F1501-95 : Test Method for Tension Testing of Calcium Phosphate Coatings (Withdrawn 2000)

  • ASTM F1502 : Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, andMedium Duty Vehicles

  • ASTM F1502-05E01 : Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles

  • ASTM F1503 : Practice for Machine/Process Capability Study Procedure

  • ASTM F1503-02 : Practice for Machine/Process Capability Study Procedure

  • ASTM F1504-02 : Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation

  • ASTM F1505 : Specification for Insulated and Insulating Hand Tools

  • ASTM F1505-01 : Specification for Insulated and Insulating Hand Tools

  • ASTM F1506 : Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Useby Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards

  • ASTM F1506-02AE01 : Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards

  • ASTM F1507 : Specification for Surge Suppressors for Shipboard Use

  • ASTM F1507-99 : Specification for Surge Suppressors for Shipboard Use

  • ASTM F1508 : Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services

  • ASTM F1508-96R04 : Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services

  • ASTM F1509 : Test Methods for Determining Acceptability of Ribbon Welds in Fabric Cartridges

  • ASTM F1509-94R04 : Test Methods for Determining Acceptability of Ribbon Welds in Fabric Cartridges

  • ASTM F151 : Test Method for Residual Solvents in Flexible Barrier Materials (Withdrawn 2004) NoReplacement

  • ASTM F1510-01 : Specification for Rotary Positive Displacement Pumps, Commercial Ships Use

  • ASTM F1511-05 : Specification for Mechanical Seals for Shipboard Pump Applications

  • ASTM F1512 : Practice for Ultrasonic C Scan Bond Evaluation of Sputtering Target Backing PlateAssemblies

  • ASTM F1512-94R03 : Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies

  • ASTM F1513 : Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin FilmApplications

  • ASTM F1513-99R03 : Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications

  • ASTM F1514 : Test Method for Measuring Heat Stability of Resilient Vinyl Flooring by Color Change

  • ASTM F1514-03 : Test Method for Measuring Heat Stability of Resilient Flooring by Color Change

  • ASTM F1515 : Test Method for Measuring Light Stability of Resilient Vinyl Flooring by Color Change

  • ASTM F1515-03 : Test Method for Measuring Light Stability of Resilient Flooring by Color Change

  • ASTM F1516 : Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (whenRecommended)

  • ASTM F1516-03 : Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)

  • ASTM F1517 : Guide for Scope of Performance of Emergency Medical Services Ambulance Operations

  • ASTM F1517-94R02 : Guide for Scope of Performance of Emergency Medical Services Ambulance Operations

  • ASTM F1518 : Practice for Cleaning and Disinfection of Flexible Fiberoptic and Video Endoscopes Used inthe Examination of the Hollow Viscera

  • ASTM F1518-00 : Practice for Cleaning and Disinfection of Flexible Fiberoptic and Video Endoscopes Used in the Examination of the Hollow Viscera

  • ASTM F151-86(1997) : Test Method for Residual Solvents in Flexible Barrier Materials (Withdrawn 2004)

  • ASTM F1519 : Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Usedto Heat Food Products

  • ASTM F1519-98R03 : Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products

  • ASTM F152 : Test Methods for Tension Testing of Nonmetallic Gasket Materials

  • ASTM F1520 : Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges

  • ASTM F1520-94R03 : Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges

  • ASTM F1521 : Test Methods for Performance of Range Tops

  • ASTM F1521-03 : Test Methods for Performance of Range Tops

  • ASTM F1522 : Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills

  • ASTM F1522-95R01 : Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills

  • ASTM F1523 : Guide for Selection of Booms in Accordance With Water Body Classifications

  • ASTM F1523-94R01 : Guide for Selection of Booms in Accordance With Water Body Classifications

  • ASTM F1524 : Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills

  • ASTM F1524-95R01 : Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills

  • ASTM F1525 : Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills

  • ASTM F1525-96R01 : Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills

  • ASTM F1526 : Test Method for Measuring Surface Metal Contamination on Silicon Wafers by TotalReflection X Ray Fluorescence Spectroscopy (Withdrawn 2003) No Replacement

  • ASTM F1526-95(2000) : Test Method for Measuring Surface Metal Contamination on Silicon Wafers by Total Reflection X-Ray Fluorescence Spectroscopy (Withdrawn 2003)

  • ASTM F1527 : Guide for Application of Certified Reference Materials and Reference Wafers for Calibrationand Control of Instruments for Measuring Resistivity of Silicon (Withdrawn 2003) No Replacement

  • ASTM F1527-02 : Guide for Application of Certified Reference Materials and Reference Wafers for Calibration and Control of Instruments for Measuring Resistivity of Silicon (Withdrawn 2003)

  • ASTM F1528 : Test Method for Measuring Boron Contamination in Heavily Doped -Type Silicon Substrates by Secondary Ion Mass Spectrometry

  • ASTM F1528-94(1999) : Test Method for Measuring Boron Contamination in Heavily Doped N-Type Silicon Substrates by Secondary Ion Mass Spectrometry (Withdrawn 2003)

  • ASTM F1529 : Test Method for Sheet Resistance Uniformity Evaluation by In-Line Four-Point Probe with the Dual-Configuration Procedure

  • ASTM F1529-97 : Test Method for Sheet Resistance Uniformity Evaluation by In-Line Four-Point Probe with the Dual-Configuration Procedure (Withdrawn 2003)

  • ASTM F153 : Test Method for Determining the Yield of Wide Inked Computer Ribbons

  • ASTM F1530 : Test Method for Measuring Flatness, Thickness, and Thickness Variation on Silicon Wafersby Automated Noncontact Scanning (Withdrawn 2003) No Replacement

  • ASTM F1530-02 : Test Method for Measuring Flatness, Thickness, and Thickness Variation on Silicon Wafers by Automated Noncontact Scanning (Withdrawn 2003)

  • ASTM F1531 : Test Method for Comparing Printer or Copier Cartridges

  • ASTM F1531-94 : Test Method for Comparing Printer or Copier Cartridges (Withdrawn 2003)

  • ASTM F1532-94 : Guide for Qualification, Selection, Training, Utilization, and Supervision of Security Screening Personnel (Withdrawn 2001)

  • ASTM F1533 : Specification for Deformed Polyethylene (PE) Liner

  • ASTM F1533-01 : Specification for Deformed Polyethylene (PE) Liner

  • ASTM F1534 : Test Method for Determining Changes in Fire Test Response Characteristics of CushioningMaterials After Water Leaching

  • ASTM F1534-05 : Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching

  • ASTM F1534M-94E01 : Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching

  • ASTM F1535 : Test Method for Carrier Recombination Lifetime in Silicon Wafers by NoncontactMeasurement of Photoconductivity Decay by Microwave Reflectance (Withdrawn 2003) NoReplacement

  • ASTM F1535-00 : Test Method for Carrier Recombination Lifetime in Silicon Wafers by Noncontact Measurement of Photoconductivity Decay by Microwave Reflectance (Withdrawn 2003)

  • ASTM F1536 : Test Method for Determining Strength and Setting Time of Synthetic Water ActivatedPolyurethane Fiberglass Orthopaedic Casting Tape

  • ASTM F1536-95R05 : Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape

  • ASTM F1537 : Specification for Wrought Cobalt 28 Chromium 6 Molybdenum Alloy for Surgical Implants(UNS R31537, UNS R31538, and UNS R31539)

  • ASTM F1537-00 : Specification for Wrought Cobalt-28 Chromium-6 Molybdenum Alloy for Surgical Implants

  • ASTM F1538 : Specification for Glass and Glass Ceramic Biomaterials for Implantation

  • ASTM F1538-03 : Specification for Glass and Glass Ceramic Biomaterials for Implantation

  • ASTM F1539-95(1999) : Test Method for Constant Amplitude Bending Fatigue Tests of Metallic Bone Staples (Withdrawn 2000)

  • ASTM F154 : Guide for Identification of Structures and Contaminants Seen on Specular Silicon Surfaces(Withdrawn 2003) No Replacement

  • ASTM F154-02 : Guide for Identification of Structures and Contaminants Seen on Specular Silicon Surfaces (Withdrawn 2003)

  • ASTM F1540-95(1999) : Test Method for Pull-Out Fixation Strength of Metallic Bone Staples (Withdrawn 2000)

  • ASTM F1541 : Specification and Test Methods for External Skeletal Fixation Devices

  • ASTM F1541-02 : Specification and Test Methods for External Skeletal Fixation Devices

  • ASTM F1542 : Specification for the Requirements and Disclosure of Self Closing Aneurysm Clips

  • ASTM F1542-94R00 : Specification for the Requirements and Disclosure of Self-Closing Aneurysm Clips

  • ASTM F1543 : Specification for Shock Attenuation Properties of Fencing Surfaces

  • ASTM F1543-96R02E01 : Specification for Shock Attenuation Properties of Fencing Surfaces

  • ASTM F1544-04 : Specification for Determining the Rating Velocities of an Archery Bow

  • ASTM F1545 : Specification for Plastic Lined Ferrous Metal Pipe, Fittings, and Flanges

  • ASTM F1545-97R03 : Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges

  • ASTM F1546/F1546M : Specification for Fire Hose Nozzles

  • ASTM F1546/F1546M-96R01 : Specification for Fire Hose Nozzles

  • ASTM F1547-99 : Guide Listing Relevant Standards and Publications for Commercial Shipbuilding

  • ASTM F1548 : Specification for the Performance of Fittings for Use with Gasketed Mechanical CouplingsUsed in Piping Applications

  • ASTM F1548-01 : Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

  • ASTM F1549 : Terminology Relating to Underwater Search, Rescue, and Recovery Activities

  • ASTM F1549-94R05 : Terminology Relating to Underwater Search, Rescue, and Recovery Activities

  • ASTM F1550 : Test Method for Determination of Fire Test Response Characteristics of Components or Composites ofMattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing aBench Scale Oxygen Consumption Calorimeter

  • ASTM F1550-05 : Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale

  • ASTM F1550M-94E01 : Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale

  • ASTM F1551-03 : Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials

  • ASTM F1552 : Practice for Training Instructor Qualification and Certification Eligibility of EmergencyMedical Dispatchers

  • ASTM F1552-94R02 : Practice for Training Instructor Qualification and Certification Eligibility of Emergency Medical Dispatchers

  • ASTM F1553-01 : Guide for Specifying Industrial and Commercial Chain Link Fence

  • ASTM F1554 : Specification for Anchor Bolts, Steel, 36, 55, and 105 ksi Yield Strength

  • ASTM F1554-04 : Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

  • ASTM F1555 : Guide for Characteristics for Extremity Splints

  • ASTM F1555-94R02 : Guide for Characteristics for Extremity Splints

  • ASTM F1556 : Guide for Spinal Immobilization and Extrication (Spined) Device Characteristics

  • ASTM F155-65(1977) : Method of Test for for Temper of Strip and Sheet Metals for Electronic Devices (Spring-Back Method (Withdrawn 1983)

  • ASTM F1556-94R02 : Guide for Spinal Immobilization and Extrication (SPINE) Device Characteristics

  • ASTM F1557 : Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics

  • ASTM F1557-94R02 : Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics

  • ASTM F1558 : Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID)

  • ASTM F1558-94R02 : Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID)

  • ASTM F1559 : Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC)

  • ASTM F1559-94R02 : Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC)

  • ASTM F1560 : Practice for Emergency Medical Dispatch Management

  • ASTM F1560-00 : Practice for Emergency Medical Dispatch Management

  • ASTM F1561-03 : Performance Requirements for Plastic Chairs for Outdoor Use

  • ASTM F1562 : Guide for Use Oriented Foreign Language Instruction

  • ASTM F1562-95R05 : Guide for Use-Oriented Foreign Language Instruction

  • ASTM F1563 : Specification for Tools to Squeeze off Polyethylene (PE) Gas Pipe or Tubing

  • ASTM F1563-01 : Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing

  • ASTM F1564 : Specification for Structure Mounted Insulating Work Platforms for Electrical Workers

  • ASTM F1564-95R00 : Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers

  • ASTM F1565 : Specification for Pressure Reducing Valves for Steam Service

  • ASTM F1565-00 : Specification for Pressure-Reducing Valves for Steam Service

  • ASTM F1566 : Test Methods for Evaluation of Innersprings and Boxsprings

  • ASTM F1566-99R04 : Test Methods for Evaluation of Innersprings and Boxsprings

  • ASTM F1567 : Specification for Fabricated or Cast Automatic Self Cleaning, Fuel Oil and Lubricating OilStrainers

  • ASTM F1567-94R01 : Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers

  • ASTM F1568 : Specification for Food Processors, Electric

  • ASTM F1568-03 : Specification for Food Processors, Electric

  • ASTM F1569 : Guide for Generation of Consensus Reference Materials for Semiconductor Technology(Withdrawn 2003) No Replacement

  • ASTM F1569-94(1999) : Guide for Generation of Consensus Reference Materials for Semiconductor Technology (Withdrawn 2003)

  • ASTM F1570 : Test Method for Determining the Tactile Ratio of a Membrane Switch

  • ASTM F1570-01E01 : Test Method for Determining the Tactile Ratio of a Membrane Switch

  • ASTM F1571 : Test Method for Determination of Abrasion and Smudge Resistance of Images Producedfrom Business Copy Products (Sutherland Method)

  • ASTM F1571-95R02 : Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Sutherland Method)

  • ASTM F1572 : Test Methods for Tire Performance Testing on Snow and Ice Surfaces

  • ASTM F1572-99 : Test Methods for Tire Performance Testing on Snow and Ice Surfaces

  • ASTM F1573 : Specification for Anesthetic Equipment Oropharyngeal and Nasopharyngeal Airways

  • ASTM F1573-95R00 : Specification for Anesthetic Equipment\MOropharyngeal and Nasopharyngeal Airways

  • ASTM F1574 : Test Method for Compressive Strength of Gaskets at Elevated Temperatures

  • ASTM F1574-03A : Test Method for Compressive Strength of Gaskets at Elevated Temperatures

  • ASTM F1575 : Test Method for Determining Bending Yield Moment of Nails

  • ASTM F1575-03 : Test Method for Determining Bending Yield Moment of Nails

  • ASTM F157-58 : Methods of Testing Wire for Supports Used in Electronic Devices and Lamps (Withdrawn 1959)

  • ASTM F1576-95A : Guide for Selection of Security Control Systems, Part II – Defining the Central Contol System (Withdrawn 1999)

  • ASTM F1577 : Test Methods for Detention Locks for Swinging Doors

  • ASTM F1577-05 : Test Methods for Detention Locks for Swinging Doors

  • ASTM F1578 : Practice for Contact Closure Cycling of a Membrane Switch

  • ASTM F1578-01 : Practice for Contact Closure Cycling of a Membrane Switch

  • ASTM F1579 : Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications

  • ASTM F1579-02E01 : Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications

  • ASTM F1580 : Specification for Titanium and Titanium 6 Aluminum 4 Vanadium Alloy Powders for Coatingsof Surgical Implants

  • ASTM F1580-01 : Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants

  • ASTM F1581 : Specification for Composition of Anorganic Bone for Surgical Implants

  • ASTM F1581-99 : Specification for Composition of Anorganic Bone for Surgical Implants

  • ASTM F1582 : Terminology Relating to Spinal Implants

  • ASTM F1582-98R03 : Terminology Relating to Spinal Implants

  • ASTM F1583 : Practice for Communications Procedures Phonetics

  • ASTM F1583-95R00 : Practice for Communications Procedures\MPhonetics

  • ASTM F1584 : Practice for Marking Buildings During Disaster Search Operations

  • ASTM F1584-95R03 : Practice for Marking Buildings During Disaster Search Operations

  • ASTM F1585 : Guide for Integrity Testing of Porous Barrier Medical Packages

  • ASTM F1585-00 : Guide for Integrity Testing of Porous Barrier Medical Packages

  • ASTM F1586 : Specification for Wrought Nitrogen Strengthened 21 Chromium/10 Nickel/3 Manganese/2.5Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675)

  • ASTM F1586-02 : Specification for Wrought Nitrogen Strengthened 21 Chromium\M10 Nickel\M3 Manganese\M2.5 Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)

  • ASTM F1587 : Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders

  • ASTM F1587-99R05 : Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders

  • ASTM F1588 : Test Method for Constant Tensile Load Joint Test (CTLJT)

  • ASTM F1588-96R02 : Test Method for Constant Tensile Load Joint Test (CTLJT)

  • ASTM F1589 : Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in PlasticPipe (Withdrawn 2003) No Replacement

  • ASTM F1589-95(2001) : Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe (Withdrawn 2003)

  • ASTM F1590 : Specification for Tracheostomy Tube Connectors (Withdrawn 2003) Replaced by ISO5366.3 0 ASTM 0

  • ASTM F1590-95 : Specification for Tracheostomy Tube Connectors (Withdrawn 2003)

  • ASTM F1591 : Practice for Visual Signals Between Persons on the Ground and in Aircraft During GroundEmergencies

  • ASTM F1591-95R00 : Practice for Visual Signals Between Persons on the Ground and in Aircraft During Ground Emergencies

  • ASTM F1592 : Test Methods for Detention Hollow Metal Vision Systems

  • ASTM F1592-05 : Test Methods for Detention Hollow Metal Vision Systems

  • ASTM F1593 : Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High MassResolution Glow Discharge Mass Spectrometer

  • ASTM F1593-97R02 : Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer

  • ASTM F1594 : Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum CoatingApplications

  • ASTM F1594-95R03 : Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications

  • ASTM F1595 : Practice for Viewing Conditions for Visual Inspection of Membrane Switches

  • ASTM F1595-00 : Practice for Viewing Conditions for Visual Inspection of Membrane Switches

  • ASTM F1596 : Practice for Exposure of Membrane Switches to Temperature and Relative Humidity

  • ASTM F1596-00 : Practice for Exposure of Membrane Switches to Temperature and Relative Humidity

  • ASTM F1597 : Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch

  • ASTM F1597-02 : Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch

  • ASTM F1598 : Test Method for Determining the Effects of Chemical/Solvent Exposure to a MembraneSwitch/Graphic Overlay (Spot Test Method)

  • ASTM F1598-95R02 : Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)

  • ASTM F1599 : Guide for Collecting Performance Data on Temporary Storage Devices

  • ASTM F1599-95R03 : Guide for Collecting Performance Data on Temporary Storage Devices

  • ASTM F16 : Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for ElectronicDevices and Lamps

  • ASTM F1600 : Terminology Relating to Bioremediation

  • ASTM F1600-95AR01 : Terminology Relating to Bioremediation

  • ASTM F1601 : Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems

  • ASTM F1601-01 : Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems

  • ASTM F1602 : Specification for Kettles, Steam Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or WallMounted, Direct Connected, Gas Fired and Electric Fired

  • ASTM F1602-95R01 : Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Connected, Gas Fired and Electric Fired

  • ASTM F1603 : Specification for Kettles, Steam Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, TableMounted, Direct Connected, Gas Fired and Electric Fired

  • ASTM F1603-95R01 : Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Connected, Gas Fired and Electric Fired

  • ASTM F1604 : Specification for Freezers, Ice Cream, Soft Serve, Shake

  • ASTM F1604-02 : Specification for Freezers, Ice Cream, Soft Serve, Shake

  • ASTM F1605 : Test Method for Performance of Double Sided Griddles

  • ASTM F1605-95R01E01 : Test Method for Performance of Double-Sided Griddles

  • ASTM F1606 : Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE)

  • ASTM F1606-95 : Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner (Withdrawn 2004)

  • ASTM F1607 : Guide for Reporting of Test Performance Data for Oil Spill Response Pumps

  • ASTM F1607-95R03 : Guide for Reporting of Test Performance Data for Oil Spill Response Pumps

  • ASTM F1608 : Test Method for Microbial Ranking of Porous Packaging Materials (Exposure ChamberMethod)

  • ASTM F1608-00R04 : Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)

  • ASTM F1609 : Specification for Calcium Phosphate Coatings for Implantable Materials

  • ASTM F1609-03 : Specification for Calcium Phosphate Coatings for Implantable Materials

  • ASTM F1610-95(1999) : Test Method for Soft Tissue Fixation Strength of Metallic Bone Staples (Withdrawn 2000)

  • ASTM F1611 : Specification for Intramedullary Reamers

  • ASTM F1611-00R04 : Specification for Intramedullary Reamers

  • ASTM F1612 : Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty FemoralComponents with Torsion

  • ASTM F1612-95R00 : Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components with Torsion

  • ASTM F1613 : Specification for Surgical Tissue/Dressing/Pick Up Forceps (Thumb Type)

  • ASTM F1613-95R02 : Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)

  • ASTM F1614 : Test Method for Shock Attenuating Properties of Materials Systems for Athletic Footwear

  • ASTM F1614-99 : Test Method for Shock Attenuating Properties of Materials Systems for Athletic Footwear

  • ASTM F1615 : Specification for Cautionary Labeling for Five Gallon Open Head Plastic Containers

  • ASTM F1615-95R04 : Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers

  • ASTM F1616 : Guide for Scope of Performance of First Responders Who Practice in the Wilderness orDelayed or Prolonged Transport Settings

  • ASTM F1616-95R02 : Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings

  • ASTM F1617 : Test Method for Measuring Surface Sodium, Aluminum, Potassium, and Iron on Silicon andEPI Substrates by Secondary Ion Mass Spectrometry (Withdrawn 2003) No Replacement

  • ASTM F1617-98(2002) : Test Method for Measuring Surface Sodium, Aluminum, Potassium, and Iron on Silicon and EPI Substrates by Secondary Ion Mass Spectrometry (Withdrawn 2003)

  • ASTM F1618 : Practice for Determination of Uniformity of Thin Films on Silicon Wafers (Withdrawn 2003) No Replacement

  • ASTM F1618-02 : Practice for Determination of Uniformity of Thin Films on Silicon Wafers (Withdrawn 2003)

  • ASTM F1619 : Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by InfraredAbsorption Spectroscopy with p Polarized Radiation Incident at the Brewster Angle (Withdrawn 2003) No Replacement

  • ASTM F1619-95(2000)e1 : Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with p-Polarized Radiation Incident at the Brewster Angle (Withdrawn 2003)

  • ASTM F1620 : Practice for Calibrating a Scanning Surface Inspection System Using MonodispersePolystyrene Latex Spheres Deposited on Polished or Epitaxial Wafer Surfaces (Withdrawn 2003) NoReplacement

  • ASTM F1620-96 : Practice for Calibrating a Scanning Surface Inspection System Using Monodisperse Polystyrene Latex Spheres Deposited on Polished or Epitaxial Wafer Surfaces (Withdrawn 2003)

  • ASTM F1621 : Practice for Determining the Positional Accuracy Capabilities of a Scanning SurfaceInspection System (Withdrawn 2003) No Replacement

  • ASTM F1621-96 : Practice for Determining the Positional Accuracy Capabilities of a Scanning Surface Inspection System (Withdrawn 2003)

  • ASTM F1622-95(2000) : Test Method for Measuring the Torsional Properties of Metallic Bone Screws (Withdrawn 2001)

  • ASTM F1623 : Terminology Relating to Thermal Imaging Products

  • ASTM F1623-96R02 : Terminology Relating to Thermal Imaging Products

  • ASTM F1624 : Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by theIncremental Step Loading Technique

  • ASTM F1624-00 : Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique

  • ASTM F1625 : Specification and Test Method for Rear Mounted Bicycle Child Carriers

  • ASTM F1625-00 : Specification and Test Method for Rear-Mounted Bicycle Child Carriers

  • ASTM F1626 : Practice for Preparing Shipboard Fire Control Plans

  • ASTM F1626-95R00 : Practice for Preparing Shipboard Fire Control Plans

  • ASTM F1627 : Specification for Tracheostomy Tubes Pediatric Tracheostomy Tubes (Withdrawn 2003) Replaced by ISO5366.3

  • ASTM F1627-95 : Specification for Tracheostomy Tubes-Pediatric Tracheostomy Tubes (Withdrawn 2003)

  • ASTM F1628 : Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and RelatedTreatments Intended for Use During Laser Surgery

  • ASTM F1628-95R00 : Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and Related Treatments Intended for Use During Laser Surgery

  • ASTM F1629 : Guide for Establishing Operating Emergency Medical Services and Management InformationSystems, or Both

  • ASTM F1629-95R02 : Guide for Establishing Operating Emergency Medical Services and Management Information Systems, or Both

  • ASTM F1630 : Test Method for Low Temperature FT-IR Analysis of Single Crystal Silicon for III-V Impurities

  • ASTM F1630-00 : Test Method for Low Temperature FT-IR Analysis of Single Crystal Silicon for III-V Impurities (Withdrawn 2003)

  • ASTM F1631 : Test Method for Impact Attenuation Properties of Body Padding and Protective Wear for theSport of Fencing (Withdrawn 2003) No Replacement

  • ASTM F1631-95 : Test Method for Impact Attenuation Properties of Body Padding and Protective Wear for the Sport of Fencing (Withdrawn 2003)

  • ASTM F1632 : Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Greenand Sports Field Rootzone Mixes

  • ASTM F1632-03 : Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes

  • ASTM F1633 : Guide for Techniques in Land Search

  • ASTM F1633-97R03 : Guide for Techniques in Land Search

  • ASTM F1634 : Practice for In Vitro Environmental Conditioning of Polymer Matrix Composite Materials andImplant Devices

  • ASTM F1634-95R00 : Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices

  • ASTM F1635 : Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resinsand Fabricated Forms for Surgical Implants

  • ASTM F1635-04A : Test Method for Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

  • ASTM F1636-95e2 : Specification for Bores and Cones for Modular Femoral Heads (Withdrawn 2001)

  • ASTM F1637 : Practice for Safe Walking Surfaces

  • ASTM F1637-02E01 : Practice for Safe Walking Surfaces

  • ASTM F1638 : Terminology for Surgical Tissue/Dressing/Pick Up Forceps (Thumb Type)

  • ASTM F1638-95R02 : Terminology for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb-Type)

  • ASTM F1639 : Test Method for Performance of Combination Ovens

  • ASTM F1639-95R01 : Test Method for Performance of Combination Ovens

  • ASTM F1640-03 : Guide for Selection and Use of Packaging Materials for Foods to Be Irradiated

  • ASTM F1641 : Test Method for Measuring Penetration Resistance of Security Glazing Using a PendulumImpactor (Withdrawn 2004) No Replacement

  • ASTM F1641-95 : Test Method for Measuring Penetration Resistance of Security Glazing Using a Pendulum Impactor (Withdrawn 2004)

  • ASTM F1642 : Test Method for Glazing and Glazing Systems Subject to Airblast Loadings

  • ASTM F1642-04 : Test Method for Glazing and Glazing Systems Subject to Airblast Loadings

  • ASTM F1643 : Test Methods for Detention Sliding Door Locking Device Assembly

  • ASTM F1643-05 : Test Methods for Detention Sliding Door Locking Device Assembly

  • ASTM F1644 : Guide for Health and Safety Training of Oil Spill Responders

  • ASTM F1644-01 : Guide for Health and Safety Training of Oil Spill Responders

  • ASTM F1645 : Test Method for Water Migration in Honeycomb Core Materials

  • ASTM F1645-00 : Test Method for Water Migration in Honeycomb Core Materials

  • ASTM F1646 : Terminology Relating to Safety and Traction for Footwear

  • ASTM F1646-05E01 : Terminology Relating to Safety and Traction for Footwear

  • ASTM F1647-02A : Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes

  • ASTM F1648 : Test Methods for Archery Bowstring Component Serving String Material

  • ASTM F1648-95R03 : Test Methods for Archery Bowstring Component\MServing String Material

  • ASTM F1649 : Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires onVehicles Equipped with Anti Lock Braking Systems

  • ASTM F1649-96R03 : Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems

  • ASTM F1650 : Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions

  • ASTM F1650-98 : Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions

  • ASTM F1651 : Guide for Training the Emergency Medical Technician (Paramedic)

  • ASTM F1651-95R02 : Guide for Training the Emergency Medical Technician (Paramedic)

  • ASTM F1652 : Guide for Providing Essential Data Needed in Advance for Prehospital Emergency MedicalServices

  • ASTM F1652-95R02 : Guide for Providing Essential Data Needed in Advance for Prehospital Emergency Medical Services

  • ASTM F1653 : Guide for Scope of Performance of Triage in Prehospital Environment

  • ASTM F1653-95R02 : Guide for Scope of Performance of Triage in a Prehospital Environment

  • ASTM F1654 : Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triagein Prehospital Environment

  • ASTM F1654-95R02 : Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment

  • ASTM F1655 : Guide for Training First Responders Who Practice in Wilderness, Delayed, or ProlongedTransport Settings

  • ASTM F1655-95R02 : Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings

  • ASTM F1656 : Guide for Health and Safety Training of Oil Spill Responders in the United States

  • ASTM F1656-01 : Guide for Health and Safety Training of Oil Spill Responders in the United States

  • ASTM F1657 : Practice for Emergency Joining of Booms with Incompatible Connectors

  • ASTM F1657-96R02 : Practice for Emergency Joining of Booms with Incompatible Connectors

  • ASTM F1658-95 : Test Method for Shear Testing of Calcium Phosphate Coatings (Withdrawn 2000)

  • ASTM F1659 : Test Method for Bending and Shear Fatigue Testing of Calcium Phosphate Coatings on SolidMetallic Substrates (Withdrawn 2005) No Replacement

  • ASTM F1659-95 : Test Method for Bending and Shear Fatigue Testing of Calcium Phosphate Coatings on Solid Metallic Substrates

  • ASTM F1660-95(1999) : Test Method for Elastic Static Bending of Metallic Bone Staples (Withdrawn 2000)

  • ASTM F1661 : Test Method for Determining the Contact Bounce Time of a Membrane Switch

  • ASTM F1661-96R02 : Test Method for Determining the Contact Bounce Time of a Membrane Switch

  • ASTM F1662-04 : Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch

  • ASTM F1663 : Test Method for Determining the Capacitance of a Membrane Switch

  • ASTM F1663-95R02 : Test Method for Determining the Capacitance of a Membrane Switch

  • ASTM F1664-01 : Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

  • ASTM F1665 : Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer CoatedSteel Barbed Wire Used With Chain Link Fence

  • ASTM F1665-01 : Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

  • ASTM F1666 : Specification for Adult Tracheostomy Tubes (Withdrawn 2003) Replaced by ISO5366.3 0 ASTM 0

  • ASTM F1666-95e1 : Specification for Adult Tracheostomy Tubes (Withdrawn 2003)

  • ASTM F1667 : Specification for Driven Fasteners : Nails, Spikes, and Staples

  • ASTM F1667-03 : Specification for Driven Fasteners : Nails, Spikes, and Staples

  • ASTM F1668-96R02 : Guide for Construction Procedures for Buried Plastic Pipe

  • ASTM F1669M : Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]

  • ASTM F1669M-96R02 : Specification for Insulation Monitors for Shipboard Electrical Systems \[Metric\]

  • ASTM F1670 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration bySynthetic Blood

  • ASTM F1670-03 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood

  • ASTM F1671 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration by BloodBorne Pathogens Using Phi X174 Bacteriophage Penetration as a Test System

  • ASTM F1671-03 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System

  • ASTM F1671F1671M : Test Method for Resistance of Materials Used in Protective Clothing toPenetration by Blood-

  • ASTM F1672 : Specification for Resurfacing Patellar Prosthesis

  • ASTM F1672-95R00 : Specification for Resurfacing Patellar Prosthesis

  • ASTM F1673 : Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

  • ASTM F1673-04 : Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

  • ASTM F1674-96 : Test Method for Joint Restraint Products for Use with PVC Pipe

  • ASTM F1675-03 : Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

  • ASTM F1676 : Specification for Basic Tumbling Mats

  • ASTM F1676-96R03 : Specification for Basic Tumbling Mats

  • ASTM F1677 : Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST) (Withdrawn 2006) No Replacement

  • ASTM F1677-05 : Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)

  • ASTM F1678 : Test Method for Using a Portable Articulated Strut Slip Tester (PAST) (Withdrawn 2005) NoReplacement

  • ASTM F1678-96 : Test Method for Using a Portable Articulated Strut Slip Tester (PAST) (Withdrawn 2005)

  • ASTM F1679 : Test Method for Using a Variable Incidence Tribometer (VIT) (Withdrawn 2006) NoReplacement

  • ASTM F1679-04E01 : Test Method for Using a Variable Incidence Tribometer (VIT)

  • ASTM F1680 : Test Method for Determining Circuit Resistance of a Membrane Switch

  • ASTM F1680-02 : Test Method for Determining Circuit Resistance of a Membrane Switch

  • ASTM F1681 : Test Method for Determining Current Carrying Capacity of a Conductor as Part of aMembrane Switch Circuit

  • ASTM F1681-96R02 : Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit

  • ASTM F1682 : Test Method for Determining Travel of a Membrane Switch

  • ASTM F1682-02 : Test Method for Determining Travel of a Membrane Switch

  • ASTM F1683 : Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assemblyor Membrane Switch Component

  • ASTM F1683-02 : Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component

  • ASTM F1684 : Specification for Iron Nickel and Iron Nickel Cobalt Alloys for Low Thermal ExpansionApplications

  • ASTM F1684-99R05E01 : Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications

  • ASTM F1685 : Specification for Pressure Reducing Manifolds for Air or Nitrogen Systems

  • ASTM F1685-00 : Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems

  • ASTM F1686 : Guide for Surveys to Document and Assess Oiling Conditions on Shorelines

  • ASTM F1686-97R03 : Guide for Surveys to Document and Assess Oiling Conditions on Shorelines

  • ASTM F1687 : Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines

  • ASTM F1687-97R03 : Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines

  • ASTM F1688-96 : Guide for Estimating Oil Spill Recovery System Effectiveness (Withdrawn 1999)

  • ASTM F1689 : Test Method for Determining the Insulation Resistance of a Membrane Switch

  • ASTM F1689-02 : Test Method for Determining the Insulation Resistance of a Membrane Switch

  • ASTM F1690 : Specification for Humidifiers for Medical Use/Part 1 : General Requirements for ActiveHumidification Systems

  • ASTM F1690-96R04 : Specification for Humidifiers for Medical Use\MPart 1 : General Requirements for Active Humidification Systems

  • ASTM F1691-96 : Test Method for Determining Axial Pull-Out Strength of Medical Bone Screws (Withdrawn 2001)

  • ASTM F1692 : Test Method for Life Evaluation of a Turbine Powered Nozzle for Household Central Vacuum Cleaning Systems

  • ASTM F1692-01 : Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems

  • ASTM F1693 : Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land

  • ASTM F1693-96R03 : Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land

  • ASTM F1694 : Guide for Composing Walkway Surface Evaluation and Incident Report Forms for Slips, Stumbles, Trips and Falls

  • ASTM F1694-96R04 : Guide for Composing Walkway Surface Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls

  • ASTM F1695 : Test Method for Performance of Underfired Broilers

  • ASTM F1695-03E01 : Test Method for Performance of Underfired Broilers

  • ASTM F1696 : An American National Standard Test Method for Energy Performance of Single-Rack, Door-

  • ASTM F1696-96R03 : Test Method for Energy Performance of Single-Rack Hot Water Sanitizing, Door-Type Commercial Dishwashing Machines

  • ASTM F1697 : Specification for Poly(Vinyl Chloride) (PVC) Pro?le Strip for Machine Spiral-Wound Liner PipeRehabilitation of Existing Sewers andConduit1,2

  • ASTM F1697-02 : Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

  • ASTM F1698 : Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and CementitiousGrout for Rehabilitation of Existing Man Entry Sewers and Conduits

  • ASTM F1698-02 : Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits

  • ASTM F1699 : Classification for Passive Fiber Optic Seals

  • ASTM F1699-96R01 : Classification for Passive Fiber Optic Seals

  • ASTM F17 : Terminology Relating to Flexible Barrier Materials

  • ASTM F1700 : Specification for Solid Vinyl Floor Tile

  • ASTM F1700-04 : Specification for Solid Vinyl Floor Tile

  • ASTM F1701 : Specification for Unused Polypropylene Rope with Special Electrical Properties

  • ASTM F1701-96R01 : Specification for Unused Polypropylene Rope with Special Electrical Properties

  • ASTM F1702-96R02E01 : Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus

  • ASTM F1703 : Guide for Ice Hockey Playing Facilities

  • ASTM F1703-04 : Guide for Ice Hockey Playing Facilities

  • ASTM F1704-05 : Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems

  • ASTM F1705 : Guide for Training Emergency Medical Services Ambulance Operations

  • ASTM F1705-96R02 : Guide for Training Emergency Medical Services Ambulance Operations

  • ASTM F1706 : Practice for Determining Energy Consumption of Nonimpact Personal Computer Printers

  • ASTM F1706-96R02 : Practice for Determining Energy Consumption of Nonimpact Personal Computer Printers

  • ASTM F1707 : Practice for Determining Energy Consumption of Facsimile Machines

  • ASTM F1707-96R02 : Practice for Determining Energy Consumption of Facsimile Machines

  • ASTM F1708 : Practice for Evaluation of Granular Polysilicon by Meter Zoner Spectroscopies (Withdrawn2003) No Replacement

  • ASTM F1708-02 : Practice for Evaluation of Granular Polysilicon by Meter-Zoner Spectroscopies (Withdrawn 2003)

  • ASTM F1709 : Specification for High Purity Titanium Sputtering Targets for Electronic Thin FilmApplications

  • ASTM F1709-97R02 : Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications

  • ASTM F1710 : Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High MassResolution Glow Discharge Mass Spectrometer

  • ASTM F1710-97R02 : Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer

  • ASTM F1711 : Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel DisplayManufacturing Using a Four Point Probe

  • ASTM F1711-96R02 : Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method

  • ASTM F1712 : Specification for Steel Chain Link Fencing Materials Used in Detention and CorrectionalFacilities

  • ASTM F1712-02 : Specification for Steel Chain-Link Fencing Materials Used in Detention and Correctional Facilities

  • ASTM F1713 : Specification for Wrought Titanium 13Niobium 13Zirconium Alloy for Surgical ImplantApplications

  • ASTM F1713-03 : Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)

  • ASTM F1714 : Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices

  • ASTM F1714-96R02 : Guide for Gravimetric Wear Assessment of Prosthetic Hip-Designs in Simulator Devices

  • ASTM F1715 : Guide for Wear Assessment of Prosthetic Knee Designs in Simulator Devices (Withdrawn2006) No Replacement

  • ASTM F1715-00E01 : Guide for Wear Assessment of Prosthetic Knee Designs in Simulator Devices

  • ASTM F1716 : Guide for Transition and Performance of Marine Software Systems Maintenance

  • ASTM F1716-96R02 : Guide for Transition and Performance of Marine Software Systems Maintenance

  • ASTM F1717 : Test Methods for Spinal Implant Constructs in a Vertebrectomy Model

  • ASTM F1717-04 : Test Methods for Spinal Implant Constructs in a Vertebrectomy Model

  • ASTM F1718 : Specification for Rotary Positive Displacement Distillate Fuel Pumps

  • ASTM F1718-01 : Specification for Rotary Positive Displacement Distillate Fuel Pumps

  • ASTM F1719 : Specification for Image Interactive Stereotactic and Localization Systems

  • ASTM F1719-96R02 : Specification for Image-Interactive Stereotactic and Localization Systems

  • ASTM F1720 : Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin

  • ASTM F1720-96R04 : Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin

  • ASTM F1721 : Practices for Determining Stability of Direct Thermal Imaging Products

  • ASTM F1721-04 : Practices for Determining Stability of Direct Thermal Imaging Products

  • ASTM F1722 : Test Method for Determining Mass and Moment of Inertia of Alpine Skis

  • ASTM F1722-96R03 : Test Method for Determining Mass and Moment of Inertia of Alpine Skis

  • ASTM F1723 : Practice for Evaluation of Polycrystalline Silicon Rods by Float Zone Crystal Growth andSpectroscopy (Withdrawn 2003) No Replacement

  • ASTM F1723-02 : Practice for Evaluation of Polycrystalline Silicon Rods by Float-Zone Crystal Growth and Spectroscopy (Withdrawn 2003)

  • ASTM F1724 : Test Method for Measuring Surface Metal Contamination of Polycrystalline Silicon by AcidExtraction Atomic Absorption Spectroscopy (Withdrawn 2003) No Replacement

  • ASTM F1724-01 : Test Method for Measuring Surface Metal Contamination of Polycrystalline Silicon by Acid Extraction-Atomic Absorption Spectroscopy (Withdrawn 2003)

  • ASTM F1725 : Guide for Analysis of Crystallographic Perfection of Silicon Ingots (Withdrawn 2003) NoReplacement

  • ASTM F1725-02 : Guide for Analysis of Crystallographic Perfection of Silicon Ingots (Withdrawn 2003)

  • ASTM F1726 : Guide for Analyis of Crystallographic Perfection of Silicon Wafers (Withdrawn 2003) NoReplacement

  • ASTM F1726-02 : Guide for Analyis of Crystallographic Perfection of Silicon Wafers (Withdrawn 2003)

  • ASTM F1727 : Practice for Detection of Oxidation Induced Defects in Polished Silicon Wafers (Withdrawn2003) No Replacement

  • ASTM F1727-02 : Practice for Detection of Oxidation Induced Defects in Polished Silicon Wafers (Withdrawn 2003)

  • ASTM F1728 : Practice for Multiple Persons Cold Water Survival/Rescue Technique : Huddle Position

  • ASTM F1728-96R01 : Practice for Multiple Persons Cold Water Survival/Rescue Technique : Huddle Position

  • ASTM F1729 : Practice for Single Person Cold Water Survival/Rescue Technique : HELP Position

  • ASTM F1729-96R01 : Practice for Single Person Cold Water Survival/Rescue Technique : HELP Position

  • ASTM F1730 : Guide for Throwing a Water Rescue Throwbag

  • ASTM F1730-96R02 : Guide for Throwing a Water Rescue Throwbag

  • ASTM F1731 : Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and OtherThermal Hazard Protective Clothing

  • ASTM F1731-96R02 : Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing

  • ASTM F1732-96 : Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material

  • ASTM F1733 : Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) PlasticPipe and Tubing

  • ASTM F1733-96R02 : Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing

  • ASTM F1734 : Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze OffProcedures to Avoid Long Term Damage in Polyethylene (PE) Gas Pipe

  • ASTM F1734-03 : Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe

  • ASTM F1735-02E01 : Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits

  • ASTM F1736-03 : Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms

  • ASTM F1737 : Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response : Boom andNozzle Systems

  • ASTM F1737-96R99 : Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response : Boom and Nozzle Systems

  • ASTM F1738 : Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants

  • ASTM F1738-96R99 : Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants

  • ASTM F1739-96R02 : Guide for Performance of a Water Rescuer\MLevel I

  • ASTM F1740 : Guide for Inspection of Nylon, Polyester, or Nylon/Polyester Blend, or Both Kernmantle Rope

  • ASTM F1740-96R02 : Guide for Inspection of Nylon, Polyester, or Nylon/Polyester Blend, or Both Kernmantle Rope

  • ASTM F1741-02A : Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

  • ASTM F1742 : Specification for PVC Insulating Sheeting

  • ASTM F1742-03E01 : Specification for PVC Insulating Sheeting

  • ASTM F1743-96R03 : Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

  • ASTM F1744 : Guide for Care and Handling of Stainless Steel Surgical Instruments

  • ASTM F1744-96R02E01 : Guide for Care and Handling of Stainless Steel Surgical Instruments

  • ASTM F1745-96 : Test Method for External Fixator Connectors (Withdrawn 2000)

  • ASTM F1746-96 : Test Method for Determining In-Plane Compressive Properties of Circular Ring or Ring Segment Bridge Elements (Withdrawn 2000)

  • ASTM F1747-96 : Test Method for External Fixator Joints (Withdrawn 2000)

  • ASTM F1748-96 : Test Method for External Fixator Subassemblies (Withdrawn 2000)

  • ASTM F1749-02 : Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels

  • ASTM F1750-96 : Specification for Paintball Gun Threaded-Propellant Source Interface

  • ASTM F1751 : Specification for Helmets Used in Recreational Roller Skating (Withdrawn 2003) NoReplacement

  • ASTM F1751-00 : Specification for Helmets Used in Recreational Roller Skating (Withdrawn 2003)

  • ASTM F1752 : Test Method for Archery Bow Component Cord Material

  • ASTM F1752-96R01 : Test Method for Archery Bow Component\MCord Material

  • ASTM F1753 : Specification for Classification and Marking of Single Lens Scopes for Use with Archery Bows

  • ASTM F1753-96R01 : Specification for Classification and Marking of Single-Lens Scopes for Use with Archery Bows

  • ASTM F1754 : Guide for Marine Vessel Structural Inspection Considerations

  • ASTM F1754-97R04 : Guide for Marine Vessel Structural Inspection Considerations

  • ASTM F175-58 : Specification for Round Nickel Wire for Lamps and Electronic Devices (Withdrawn 1963)

  • ASTM F1755M : Specification for Solid State Bargraph Meters for Shipboard Use (Metric)

  • ASTM F1755M-96R02 : Specification for Solid State Bargraph Meters for Shipboard Use \[Metric\]

  • ASTM F1756 : Guide for Implementation of a Fleet Management System Network

  • ASTM F1756-97AR02 : Guide for Implementation of a Fleet Management System Network

  • ASTM F1757 : Guide for Digital Communication Protocols for Computerized Systems

  • ASTM F1757-96R02 : Guide for Digital Communication Protocols for Computerized Systems

  • ASTM F1758 : Test Methods for Detention Hinges Used on Detention Grade Swinging Doors

  • ASTM F1758-05 : Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors

  • ASTM F1759 : Practice for Design of High Density Polyethylene (HDPE) Manholes for SubsurfaceApplications

  • ASTM F1759-97R04 : Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

  • ASTM F1760 : Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non Pressure Plastic Pipe HavingReprocessed Recycled Content

  • ASTM F1760-01 : Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

  • ASTM F1761 : Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets

  • ASTM F1761-00 : Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets

  • ASTM F1762 : Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure

  • ASTM F1762-02 : Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure

  • ASTM F1763 : Test Methods for Measuring Contrast of a Linear Polarizer (Withdrawn 2003) NoReplacement

  • ASTM F1763-96(2002) : Test Methods for Measuring Contrast of a Linear Polarizer (Withdrawn 2003)

  • ASTM F1764 : Guide for Selection of Hardline Communication Systems for Confined Space Rescue

  • ASTM F1764-97R02 : Guide for Selection of Hardline Communication Systems for Confined-Space Rescue

  • ASTM F1765 : Guide for Ice Staff Self Rescue Technique

  • ASTM F1765-97AR02 : Guide for Ice Staff Self-Rescue Technique

  • ASTM F1766 : Guide for Ice Awis Self Rescue Technique

  • ASTM F1766-97AR02 : Guide for Ice Awls Self-Rescue Technique

  • ASTM F1767 : Guide for Forms Used for Search and Rescue

  • ASTM F1767-98R05 : Guide for Forms Used for Search and Rescue

  • ASTM F1768 : Guide for Using Whistle Signals During Rope Rescue Operations

  • ASTM F1768-97R02 : Guide for Using Whistle Signals During Rope Rescue Operations

  • ASTM F1769 : Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic VaporBarriers Using a Flame Ionization Detector (Withdrawn 2004) No Replacement

  • ASTM F1769-97 : Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector (Withdrawn 2004)

  • ASTM F1770 : Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible BarrierMaterials to Water Vapor (Withdrawn 2004) No Replacement

  • ASTM F1770-97e1 : Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor (Withdrawn 2004)

  • ASTM F1771 : Test Method for Evaluating Gate Oxide Integrity by Voltage Ramp Technique (Withdrawn2003) No Replacement

  • ASTM F1771-97(2002) : Test Method for Evaluating Gate Oxide Integrity by Voltage Ramp Technique (Withdrawn 2003)

  • ASTM F1772 : Specification for Climbing Harnesses

  • ASTM F1772-99 : Specification for Climbing Harnesses

  • ASTM F1773 : Terminology Relating to Climbing and Mountaineering Equipment and Practices

  • ASTM F1773-97R04 : Terminology Relating to Climbing and Mountaineering Equipment and Practices

  • ASTM F1774 : Specification for Climbing and Mountaineering Carabiners

  • ASTM F1774-99 : Specification for Climbing and Mountaineering Carabiners

  • ASTM F1775 : Specification for Labeling of Climbing and Mountaineering Equipment

  • ASTM F1775-97R04 : Specification for Labeling of Climbing and Mountaineering Equipment

  • ASTM F1776-01 : Specification for Eye Protective Devices for Paintball Sports

  • ASTM F1777-02 : Practice for Paintball Field Operation

  • ASTM F1778 : Guide for Selection of Skimmers for Oil Spill Response

  • ASTM F1778-97R02 : Guide for Selection of Skimmers for Oil-Spill Response

  • ASTM F1779 : Practice for Reporting Visual Observations of Oil on Water

  • ASTM F1779-97R03 : Practice for Reporting Visual Observations of Oil on Water

  • ASTM F1780 : Guide for Estimating Oil Spill Recovery System Effectiveness

  • ASTM F1780-97R02 : Guide for Estimating Oil Spill Recovery System Effectiveness

  • ASTM F1781 : Specification for Elastomeric Flexible Hinge Finger Total Joint Implants

  • ASTM F1781-03 : Specification for Elastomeric Flexible Hinge Finger Total Joint Implants

  • ASTM F1782 : Practice for Amount of Ink Deposit on Fabric Type Ribbons

  • ASTM F1782-97R02 : Practice for Amount of Ink Deposit on Fabric Type Ribbons

  • ASTM F1783 : Guide for Performance of an Ice Rescuer/Level II

  • ASTM F1783-97R02 : Guide for Performance of an Ice Rescuer\MLevel II

  • ASTM F1784 : Test Method for Performance of a Pasta Cooker

  • ASTM F1784-97R03E01 : Test Method for Performance of a Pasta Cooker

  • ASTM F1785 : Test Method for Performance of Steam Kettles

  • ASTM F1785-97R03E01 : Test Method for Performance of Steam Kettles

  • ASTM F1786 : Test Method for Performance of Braising Pans

  • ASTM F1786-97R04E01 : Test Method for Performance of Braising Pans

  • ASTM F1787 : Test Method for Performance of Rotisserie Ovens

  • ASTM F1787-98R03 : Test Method for Performance of Rotisserie Ovens

  • ASTM F1788 : Guide for In Situ Burning of Oil Spills on Water : Environmental and OperationalConsiderations

  • ASTM F1788-97R03 : Guide for In-Situ Burning of Oil Spills on Water : Environmental and Operational Considerations

  • ASTM F1789-04A : Terminology for F16 Mechanical Fasteners

  • ASTM F1790 : Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing

  • ASTM F1790-05 : Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing

  • ASTM F1791 : Specification for Filters Used in Air or Nitrogen Systems

  • ASTM F1791-00 : Specification for Filters Used in Air or Nitrogen Systems

  • ASTM F1792 : Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

  • ASTM F1792-97R04 : Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

  • ASTM F1793 : Specification for Automatic Shut Off Valves (Also Known as Excess Flow Valves, EFV) for AirOr Nitrogen Service

  • ASTM F1793-97R04 : Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service

  • ASTM F1794 : Specification for Hand Operated, Globe Style Valves for Gas (Except Oxygen Gas), andHydraulic Systems

  • ASTM F1794-97R04 : Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems

  • ASTM F1795 : Specification for Pressure Reducing Valves for Air or Nitrogen Systems

  • ASTM F1795-00 : Specification for Pressure-Reducing Valves for Air or Nitrogen Systems

  • ASTM F1796 : Specification for High Voltage Detectors/Part 1 Capacitive Type to be Used for VoltagesExceeding 600 Volts AC

  • ASTM F1796-97R02 : Specification for High Voltage Detectors\MPart 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC

  • ASTM F1797-98R03 : Test Method for Acoustic Emission Testing of Insulated Digger Derricks

  • ASTM F1798 : Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms andSubassemblies Used in Spinal Arthrodesis Implants

  • ASTM F1798-97R03 : Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants

  • ASTM F1799 : Guide for Shipboard Generated Waste Management Audits

  • ASTM F1799-97R04 : Guide for Shipboard Generated Waste Management Audits

  • ASTM F18 : Specification and Test Method for Evaluation of Glass to Metal Headers Used in ElectronDevices

  • ASTM F180 : Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices

  • ASTM F1800-04 : Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements

  • ASTM F1801 : Practice for Corrosion Fatigue Testing of Metallic Implant Materials

  • ASTM F1801-97R04 : Practice for Corrosion Fatigue Testing of Metallic Implant Materials

  • ASTM F1802 : Test Method for Performance Testing of Excess Flow Valves

  • ASTM F1802-04 : Test Method for Performance Testing of Excess Flow Valves

  • ASTM F1803 : Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based onControlled Inside Diameter

  • ASTM F1803-04 : Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter

  • ASTM F1804 : Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During PullIn Installation

  • ASTM F1804-03 : Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation

  • ASTM F1805 : Test Method for Single Wheel Driving Traction in a Straight Line on Snow and Ice CoveredSurfaces

  • ASTM F1805-00 : Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces

  • ASTM F1806 : Practice for Tire Testing Operations/Basic Concepts and Terminology for Reference Tire Use

  • ASTM F1806-97R01E01 : Practice for Tire Testing Operations\NBasic Concepts and Terminology for Reference Tire Use

  • ASTM F1807 : Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross linkedPolyethylene (PEX) Tubing

  • ASTM F1807-04 : Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing

  • ASTM F1808 : Guide for Weight Control Technical Requirements for Surface Ships

  • ASTM F1808-03 : Guide for Weight Control Technical Requirements for Surface Ships

  • ASTM F1809 : Guide for Selection and Use of Etching Solutions to Delineate Structural Defects in Silicon(Withdrawn 2003) No Replacement

  • ASTM F1809-02 : Guide for Selection and Use of Etching Solutions to Delineate Structural Defects in Silicon (Withdrawn 2003)

  • ASTM F1810 : Test Method for Counting Preferentially Etched or Decorated Surface Defects in SiliconWafers (Withdrawn 2003) No Replacement

  • ASTM F1810-97(2002) : Test Method for Counting Preferentially Etched or Decorated Surface Defects in Silicon Wafers (Withdrawn 2003)

  • ASTM F1811 : Practice for Estimating the Power Spectral Density Function and Related Finish Parametersfrom Surface Profile Data (Withdrawn 2003) No Replacement

  • ASTM F1811-97(2002) : Practice for Estimating the Power Spectral Density Function and Related Finish Parameters from Surface Profile Data (Withdrawn 2003)

  • ASTM F1812 : Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding

  • ASTM F1812-02 : Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding

  • ASTM F1813 : Specification for Wrought Titanium 12 Molybdenum 6 Zirconium 2 Iron Alloy for SurgicalImplant (UNS R58120)

  • ASTM F1813-01 : Specification for Wrought Titanium \N 12 Molybdenum \N 6 Zirconium \N 2 Iron Alloy for Surgical Implant (UNS R58120)

  • ASTM F1814 : Guide for Evaluating Modular Hip and Knee Joint Components

  • ASTM F1814-97AR03 : Guide for Evaluating Modular Hip and Knee Joint Components

  • ASTM F1815-97 : Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, Particle Density, and Bulk Density of Putting Green and Sports Turf Root Zones

  • ASTM F1816 : Safety Specification for Drawstrings on Children’s Upper Outerwear

  • ASTM F1816-97R04 : Safety Specification for Drawstrings on Children’s Upper Outerwear

  • ASTM F1817-97R03 : Test Method for Performance of Conveyor Ovens

  • ASTM F1818 : Specification for Foot Protection for Chain Saw Users

  • ASTM F1818-04 : Specification for Foot Protection for Chain Saw Users

  • ASTM F1819 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration bySynthetic Blood Using a Mechanical Pressure Technique

  • ASTM F1819-04 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique

  • ASTM F1820 : Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device

  • ASTM F1820-97R03 : Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device

  • ASTM F1821 : Consumer Safety Specification for Toddler Beds

  • ASTM F1821-03A : Consumer Safety Specification for Toddler Beds

  • ASTM F1822 : Consumer Safety Specification for Non Full Size Baby Cribs (Withdrawn 2006) Replaced by F406 0 ASTM 0

  • ASTM F1822-97 : Consumer Safety Specification for Non-Full-Size Baby Cribs

  • ASTM F1823 : Guide for Water Rescue Personal Flotation Device (PFD)

  • ASTM F1823-97R02 : Guide for Water Rescue Personal Flotation Device (PFD)

  • ASTM F1824 : Guide for Performance of a Water Rescuer Level II

  • ASTM F1824-97R02 : Guide for Performance of a Water Rescuer\NLevel II

  • ASTM F1825 : Specification for Clampstick Type Live Line Tools

  • ASTM F1825-03 : Specification for Clampstick Type Live Line Tools

  • ASTM F1826 : Specification for Live Line and Measuring Telescoping Tools

  • ASTM F1826-00 : Specification for Live Line and Measuring Telescoping Tools

  • ASTM F1827-97R00 : Terminology Relating to Food Service Equipment

  • ASTM F1828 : Specification for Ureteral Stents

  • ASTM F1828-97 : Specification for Ureteral Stents

  • ASTM F1829 : Test Method for Static Evaluation of the Glenoid Locking Mechanism in Shear

  • ASTM F1829-98R03 : Test Method for Static Evaluation of Glenoid Locking Mechanism in Shear

  • ASTM F1830 : Practice for Selection of Blood for In Vitro Evaluation of Blood Pumps

  • ASTM F1830-97R05 : Practice for Selection of Blood for Evaluation of Blood Pumps

  • ASTM F1831 : Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices

  • ASTM F1831-97 : Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices

  • ASTM F1832-97R02 : Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows

  • ASTM F1833 : Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes

  • ASTM F1833-97 : Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes

  • ASTM F1834 : Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant MitigationMethod on Land

  • ASTM F1834-98R04 : Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant Mitigation Method on Land

  • ASTM F1835 : Guide for Cable Splicing Installations

  • ASTM F1835-97R02 : Guide for Cable Splicing Installations

  • ASTM F1836M-97R02 : Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)

  • ASTM F1837M : Specification for Heat Shrink Cable Entry Seals (Metric)

  • ASTM F1837M-97R02 : Specification for Heat-Shrink Cable Entry Seals (Metric)

  • ASTM F1838 : Performance Requirements for Child’s Plastic Chairs for Outdoor Use

  • ASTM F1838-98R04E01 : Performance Requirements for Child’s Plastic Chairs for Outdoor Use

  • ASTM F1839 : Specification for Rigid Polyurethane Foam for Use as a Standard Material for TestingOrthopaedic Devices and Instruments

  • ASTM F1839-01 : Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments

  • ASTM F1840 : Terminology for Surgical Suture Needles

  • ASTM F1840-98AR04 : Terminology for Surgical Suture Needles

  • ASTM F1841 : Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps

  • ASTM F1841-97R05 : Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps

  • ASTM F1842 : Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for MembraneSwitch Applications

  • ASTM F1842-02 : Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications

  • ASTM F1843 : Practice for Sample Preparation of Transparent Plastic Films for Specular GlossMeasurements, on Membrane Switch Overlays

  • ASTM F1843-97R02 : Practice for Sample Preparation of Transparent Plastic Films for Specular Gloss Measurements, on Membrane Switch Overlays

  • ASTM F1844 : Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel DisplayManufacturing Using a Noncontact Eddy Current Gage

  • ASTM F1844-97R02 : Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage

  • ASTM F1845 : Test Method for Trace Metallic Impurities in Electronic Grade Aluminum Copper, AluminumSilicon, and Aluminum Copper Silicon Alloys by High Mass Reduction Glow Discharge MassSpectrometer

  • ASTM F1845-97R02 : Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer

  • ASTM F1846 : Practice for Symbols and Markings for Use With Land Search Maps

  • ASTM F1846-98R03 : Practice for Symbols and Markings for Use With Land Search Maps

  • ASTM F1847 : Guide for Demonstrating Minimum Skills of Search and Rescue Dogs and Handlers

  • ASTM F1847-98R05 : Guide for Demonstrating Minimum Skills of Search and Rescue Dogs and Handlers

  • ASTM F1848 : Classification for Search and Rescue Dog Crew/Teams

  • ASTM F1848-98 : Classification for Search and Rescue Dog Crew/Teams

  • ASTM F1849 : Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)

  • ASTM F1849-00 : Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)

  • ASTM F1850 : Specification for Particular Requirements for Anesthesia Workstations and Their Components

  • ASTM F1850-00R05 : Specification for Particular Requirements for Anesthesia Workstations and Their Components

  • ASTM F1851 : Practice for Bar Code Verification

  • ASTM F1851-98R03 : Practice for Bar Code Verification

  • ASTM F1852 : Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies,

  • ASTM F1852-04A : Specification for |P`Twist Off|P’ Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

  • ASTM F1853-03 : Test Method for Measuring Sleeping Bag Packing Volume

  • ASTM F1854 : Test Method for Stereological Evaluation of Porous Coatings on Medical Implants

  • ASTM F1854-01 : Test Method for Stereological Evaluation of Porous Coatings on Medical Implants

  • ASTM F1855 : Specification for Polyoxymethylene (Acetal) for Medical Applications

  • ASTM F1855-00R05 : Specification for Polyoxymethylene (Acetal) for Medical Applications

  • ASTM F1856 : Practice for Determining Toner Usage for Printer Cartridges

  • ASTM F1856-04 : Practice for Determining Toner Usage for Printer Cartridges

  • ASTM F1857 : Terminology Relating to Ink Jet Printers and Images Made Therefrom

  • ASTM F1857-01 : Terminology Relating to Ink Jet Printers and Images Made Therefrom

  • ASTM F1858 : Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs orReclining Mechanisms for Outdoor Use

  • ASTM F1858-98R04E01 : Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use

  • ASTM F1859 : Specification for Rubber Sheet Floor Covering Without Backing

  • ASTM F1859-04 : Specification for Rubber Sheet Floor Covering Without Backing

  • ASTM F1860 : Specification for Rubber Sheet Floor Covering With Backing

  • ASTM F1860-04 : Specification for Rubber Sheet Floor Covering With Backing

  • ASTM F1861 : Specification for Resilient Wall Base

  • ASTM F1861-02 : Specification for Resilient Wall Base

  • ASTM F1862 : Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood(Horizontal Projection of Fixed Volume at a Known Velocity)

  • ASTM F1862-00A : Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)

  • ASTM F1863 : Test Method for Measuring the Night Vision Goggle Weighted Transmisivity of TransparentParts

  • ASTM F1863-98R04 : Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts

  • ASTM F1864 : Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials andCoatings

  • ASTM F1864-05 : Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings

  • ASTM F1865-02A : Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing

  • ASTM F1866-98 : Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings

  • ASTM F1867 : Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A forExisting Sewer and Conduit Rehabilitation

  • ASTM F1867-98R04 : Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation

  • ASTM F1868 : Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a SweatingHot Plate

  • ASTM F1868-02 : Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate

  • ASTM F1869 : Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor UsingAnhydrous Calcium Chloride

  • ASTM F1869-04 : Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride

  • ASTM F1870 : Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings inDetention and Correctional Facilities

  • ASTM F1870-05 : Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities

  • ASTM F1871 : Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer andConduit Rehabilitation

  • ASTM F1871-02 : Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation

  • ASTM F1872 : Guide for Use of Chemical Shoreline Cleaning Agents : Environmental and OperationalConsiderations

  • ASTM F1872-98 : Guide for Use of Chemical Shoreline Cleaning Agents : Environmental and Operational Considerations

  • ASTM F1873 : Specification for High Purity Dense Yttria Tetragonal Zirconium Oxide Polycrystal (Y TZP) forSurgical Implant Applications

  • ASTM F1873-98 : Specification for High-Purity Dense Yttria Tetragonal Zirconium Oxide Polycrystal (Y-TZP) for Surgical Implant Applications

  • ASTM F1874 : Test Method for Bend Testing of Needles Used in Surgical Sutures

  • ASTM F1874-98R04 : Test Method for Bend Testing of Needles Used in Surgical Sutures

  • ASTM F1875 : Practice for Fretting Corrosion Testing of Modular Implant Interfaces : Hip Femoral Headbore and Cone Taper Interface

  • ASTM F1875-98R04 : Practice for Fretting Corrosion Testing of Modular Implant Interfaces : Hip Femoral Head-Bore and Cone Taper Interface

  • ASTM F1876 : Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical ImplantApplications

  • ASTM F1876-98R03E01 : Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications

  • ASTM F1877 : Practice for Characterization of Particles

  • ASTM F1877-98R03E01 : Practice for Characterization of Particles

  • ASTM F1878 : Guide for Escort Vessel Evaluation and Selection

  • ASTM F1878-98R04 : Guide for Escort Vessel Evaluation and Selection

  • ASTM F1879 : Guide for Demonstrating Obedience and Agility in Search and Rescue Dogs

  • ASTM F1879-98R05 : Guide for Demonstrating Obedience and Agility in Search and Rescue Dogs

  • ASTM F1880-98R04 : Test Method for the Determination of Percent of Let-Off for Archery Bows

  • ASTM F1881-04 : Test Method for Measuring Baseball Bat Performance Factor

  • ASTM F1882 : Specification for Residential Basketball Systems

  • ASTM F1882-04 : Specification for Residential Basketball Systems

  • ASTM F1883 : Practice for Selection of Wire and Cable Size in AWG or Metric Units

  • ASTM F1883-03 : Practice for Selection of Wire and Cable Size in AWG or Metric Units

  • ASTM F1884 : Test Method for Determining Residual Solvents in Packaging Materials

  • ASTM F1884-04 : Test Methods for Determining Residual Solvents in Packaging Materials

  • ASTM F1885 : Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogensand Other Microorganisms

  • ASTM F1885-04 : Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms

  • ASTM F1886 : Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection

  • ASTM F1886-98R04 : Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection

  • ASTM F1887-02 : Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs

  • ASTM F1888-02 : Test Method for Compression-Displacement of Baseballs and Softballs

  • ASTM F1889 : Guide for Straightness Measurement of Arrow Shafts

  • ASTM F1889-98R04 : Guide for Straightness Measurement of Arrow Shafts

  • ASTM F1890-04 : Test Method for Measuring Softball Bat Performance Factor

  • ASTM F1891 : Specification for Arc and Flame Resistant Rainwear

  • ASTM F1891-02B : Specification for Arc and Flame Resistant Rainwear

  • ASTM F1892 : Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices

  • ASTM F1892-04 : Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices

  • ASTM F1893 : Guide for Measurement of Ionizing Dose Rate Burnout of Semiconductor Devices

  • ASTM F1893-98R03 : Guide for Measurement of Ionizing Dose-Rate Burnout of Semiconductor Devices

  • ASTM F1894 : Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition andThickness

  • ASTM F1894-98R03 : Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness

  • ASTM F1895 : Practice for Submersion of a Membrane Switch

  • ASTM F1895-98R04 : Practice for Submersion of a Membrane Switch

  • ASTM F1896 : Test Method for Determining the Electrical Resistivity of a Printed Conductive Material

  • ASTM F1896-98R04 : Test Method for Determining the Electrical Resistivity of a Printed Conductive Material

  • ASTM F1897 : Specification for Leg Protection for Chain Saw Users

  • ASTM F1897-04 : Specification for Leg Protection for Chain Saw Users

  • ASTM F1898-01 : Specification for Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers

  • ASTM F1899 : Specification for Food Waste Pulper Without Waterpress Assembly

  • ASTM F1899-98R03 : Specification for Food Waste Pulper Without Waterpress Assembly

  • ASTM F19 : Test Method for Tension and Vacuum Testing Metallized Ceramic Seals

  • ASTM F1900 : Test Method for Water Resistance of Footwear Using a Walking Step Simulator

  • ASTM F1900-98R04 : Test Method for Water Resistance of Footwear Using a Walking Step Simulator

  • ASTM F1901-98R04 : Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

  • ASTM F1903 : Practice for Testing for Biological Responses to Particles In Vitro

  • ASTM F1903-98R03 : Practice for Testing For Biological Responses to Particles

  • ASTM F1904 : Practice for Testing the Biological Responses to Particles In Vivo

  • ASTM F1904-98R03 : Practice for Testing the Biological Responses to Particles

  • ASTM F1905 : Practice for Selecting Tests for Determining the Propensity of Materials to CauseImmunotoxicity

  • ASTM F1905-98R03 : Practice For Selecting Tests for Determining the Propensity of Materials to Cause Immunotoxicity

  • ASTM F1906 : Practice for Evaluation of Immune Responses In Biocompatibility Testing Using ELISA Tests,

  • ASTM F1906-98R03 : Practice for Evaluation of Immune Responses In Biocompatibility Testing Using ELISA Tests, Lymphocyte Proliferation, and Cell Migration

  • ASTM F1908 : Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas

  • ASTM F1908-98 : Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas

  • ASTM F1909 : Specification for Preformed Open Cell Sponge Rubber Pail and Drum Gaskets

  • ASTM F1909-98R04 : Specification for Preformed Open\NCell Sponge Rubber Pail and Drum Gaskets

  • ASTM F1910 : Specification for Long Barbed Tape Obstacles

  • ASTM F1910-98R03 : Specification for Long Barbed Tape Obstacles

  • ASTM F1911 : Practice for Installation of Barbed Tape

  • ASTM F1911-98 : Practice for Installation of Barbed Tape

  • ASTM F1912 : Specification for Safety of Bean Bag Chairs

  • ASTM F1912-98R04 : Specification for Safety of Bean Bag Chairs

  • ASTM F1913 : Specification for Vinyl Sheet Floor Covering Without Backing

  • ASTM F1913-04 : Specification for Vinyl Sheet Floor Covering Without Backing

  • ASTM F1914 : Test Method for Short Term Indentation and Residual Indentation of Resilient Floor Covering

  • ASTM F1914-05 : Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering

  • ASTM F1915 : Test Methods for Glazing for Detention Facilities

  • ASTM F1915-05 : Test Methods for Glazing for Detention Facilities

  • ASTM F1916 : Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabricand Round Posts for Detention Applications

  • ASTM F1916-98 : Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications

  • ASTM F1917-00 : Consumer Safety Performance Specification for Infant Bedding and Related Accessories

  • ASTM F1918 : Safety Performance Specification for Soft Contained Play Equipment

  • ASTM F1918-04 : Safety Performance Specification for Soft Contained Play Equipment

  • ASTM F1919 : An American National Standard Standard Specification for Griddles, Single and Double Sided, Self-

  • ASTM F1919-03 : Specification for Griddles, Single and Double Sided, Self-heating, Counter or Stand Mounted Gas and Electric Fired

  • ASTM F1920-98R03 : Test Method for Energy Performance of Rack Conveyor, Hot Water Sanitizing, Commercial Dishwashing Machines

  • ASTM F1921 : Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and BlendsComprising the Sealing Surfaces of Flexible Webs

  • ASTM F1921-98R04 : Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs

  • ASTM F1922 : Test Method for Tires, Pneumatic, Vehicular, Highway

  • ASTM F1922-98 : Test Method for Tires, Pneumatic, Vehicular, Highway

  • ASTM F1923 : Test Method for Tires, Pneumatic, Low Speed, Off Highway

  • ASTM F1923-98 : Test Method for Tires, Pneumatic, Low Speed, Off Highway

  • ASTM F1924-01E01 : Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

  • ASTM F1925-99R05 : Specification for Virgin Poly(L-Lactic Acid) Resin for Surgical Implants

  • ASTM F1926 : Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Coatings

  • ASTM F1926-03 : Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Coatings

  • ASTM F1927 : Test Method for Determination of Oxygen Gas Transmission Rate, Permeability andPermeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector

  • ASTM F1927-98R04 : Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector

  • ASTM F1928 : Safety Guide for Consumer Recreational Use of Fun Karts

  • ASTM F1928-98R04E01 : Safety Guide for Consumer Recreational Use of Fun-Karts

  • ASTM F1929 : Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration

  • ASTM F1929-98R04 : Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration

  • ASTM F1930 : Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash FireSimulations Using an Instrumented Manikin

  • ASTM F1930-00 : Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin

  • ASTM F1931 : Test Method for Characterization of Gymnastic Landing Mats and Floor Exercise Surfaces

  • ASTM F1931-98R04 : Test Method for Characterization of Gymnastic Landing Mats and Floor Exercise Surfaces

  • ASTM F1932 : Test Method for Measuring Sleeping Bag Loft

  • ASTM F1932-98R04 : Test Method for Measuring Sleeping Bag Loft

  • ASTM F1933 : Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent

  • ASTM F1933-98R04 : Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent

  • ASTM F1934 : Test Method for Weighing a Backpacking or Mountaineering Tent

  • ASTM F1934-98R04 : Test Method for Weighing a Backpacking or Mountaineering Tent

  • ASTM F1935 : Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent

  • ASTM F1935-01 : Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent

  • ASTM F1936 : Specification for Shock Absorbing Properties of North American Football Field PlayingSystems as Measured in the Field

  • ASTM F1936-98 : Specification for Shock-Absorbing Properties of North American Football Field Playing Systems as Measured in the Field

  • ASTM F1937 : Specification for Body Protectors Used in Horse Sports and Horseback Riding

  • ASTM F1937-04 : Specification for Body Protectors Used in Horse Sports and Horseback Riding

  • ASTM F1938 : Guide for Safer Use of Movable Soccer Goals

  • ASTM F1938-98R04 : Guide for Safer Use of Movable Soccer Goals

  • ASTM F1939-99A : Test Method for Radiant Protective Performance of Flame Resistant Clothing Materials

  • ASTM F1940-01 : Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

  • ASTM F1941 : Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch ScrewThreads (UN/UNR))

  • ASTM F1941-00 : Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

  • ASTM F1941M-00 : Specification for Electrodeposited Coatings on Threaded Fasteners \[Metric\]

  • ASTM F1942 : Practice for Creating Test Targets for Determining the Ink Yield of the Imaging SuppliesUsed in Ink Jet Printers

  • ASTM F1942-98R03 : Practice for Creating Test Targets for Determining the Ink Yield of the Imaging Supplies Used in Ink Jet Printers

  • ASTM F1943 : Test Method for Determining the Dynamic Thermal Response of Thermal Mass TransferRibbon Products/Atlantek Method

  • ASTM F1943-98R03 : Test Method for Determining the Dynamic Thermal Response of Thermal Mass Transfer Ribbon Products\MAtlantek Method

  • ASTM F1944 : Practice for Determining the Quality of the Text, Line and Solid Fill Output Produced by InkJet Printers

  • ASTM F1944-98R03 : Practice for Determining the Quality of the Text, Line- and Solid-Fill Output Produced by Ink Jet Printers

  • ASTM F1945 : Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor FluorescentLighting

  • ASTM F1945-05 : Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting

  • ASTM F1946 : Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor FluorescentLighting and Window Filtered Daylight

  • ASTM F1946-04 : Practice for Accelerated Testing of the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window\NFiltered Daylight

  • ASTM F1947 : Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers andConduits

  • ASTM F1947-04 : Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits

  • ASTM F1948-99AE01 : Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing

  • ASTM F1949 : Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles

  • ASTM F1949-99 : Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles

  • ASTM F1950 : Specification for Physical Information to be Transferred With Used Amusement Rides andDevices

  • ASTM F1950-99 : Specification for Physical Information to be Transferred With Used Amusement Rides and Devices

  • ASTM F1951-99 : Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment

  • ASTM F1952 : Specification for Helmets Used for Downhill Mountain Bicycle Racing

  • ASTM F1952-00 : Specification for Helmets Used for Downhill Mountain Bicycle Racing

  • ASTM F1953 : Guide for Construction and Maintenance of Grass Tennis Courts

  • ASTM F1953-99R03 : Guide for Construction and Maintenance of Grass Tennis Courts

  • ASTM F1955 : Test Method for Flammability of Sleeping Bags

  • ASTM F1955-99R05 : Test Method for Flammability of Sleeping Bags

  • ASTM F1956 : Specification for Rescue Carabiners

  • ASTM F1956-99R05 : Specification for Rescue Carabiners

  • ASTM F1957 : Test Method for Composite Foam Hardness Durometer Hardness

  • ASTM F1957-99R04 : Test Method for Composite Foam Hardness-Durometer Hardness

  • ASTM F1958/F1958M : Test Method for Determining the Ignitability of Non flame Resistance Materials for Clothingby Electric Arc Exposure Method Using Mannequins

  • ASTM F1958/F1958M-99 : Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins

  • ASTM F1959/F1959M : Test Method for Determining the Arc Thermal Performance Value of Materials for Clothing

  • ASTM F1959/F1959M-04 : Test Method for Determining the Arc Rating of Materials for Clothing

  • ASTM F1960 : Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Crosslinked Polyethylene (PEX) Tubing

  • ASTM F1960-04 : Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing

  • ASTM F1961 : An American National Standard Standard Specification for Metal Mechanical Cold Flare CompressionFittings with DiscSpring for Crosslinked Polyethylene (PEX) Tubing12

  • ASTM F1961-02A : Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing

  • ASTM F1962 : Guide for Use of Maxi Horizontal Directional Drilling for Placement of Polyethylene Pipe orConduit Under Obstacles, Including River Crossings

  • ASTM F1962-99 : Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings

  • ASTM F1963 : Specification for Deep Fat Fryers, Gas or Electric, Open

  • ASTM F1963-99A : Specification for Deep-Fat Fryers, Gas or Electric, Open

  • ASTM F1964-99 : Test Method for Performance of Pressure and Kettle Fryers

  • ASTM F1965 : Test Method for Performance of Deck Ovens

  • ASTM F1965-99 : Test Method for Performance of Deck Ovens

  • ASTM F1966 : Specification for Dough Divider and Rounding Machines

  • ASTM F1966-03 : Specification for Dough Divider and Rounding Machines

  • ASTM F1967 : Consumer Safety Specification for Infant Bath Seats

  • ASTM F1967-04 : Consumer Safety Specification for Infant Bath Seats

  • ASTM F1970 : Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (VinylChloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems

  • ASTM F1970-01 : Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems

  • ASTM F1971 : Test Method for Electrical Resistance of Tires Under Load On the Test Bench

  • ASTM F1971-99 : Test Method for Electrical Resistance of Tires Under Load On the Test Bench

  • ASTM F1972 : Guide for Terminology Relating to Candles and Associated Accessory Items

  • ASTM F1972-99 : Guide for Terminology Relating to Candles and Associated Accessory Items

  • ASTM F1973 : Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene(PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems

  • ASTM F1973-02 : Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems

  • ASTM F1974-04 : Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe

  • ASTM F1975-02 : Specification for Nonpowered Bicycle Trailers Designed for Human Passengers

  • ASTM F1976 : Test Method for Impact Attenuation Properties of Athletic Shoes Using an Impact Test

  • ASTM F1976-99 : Test Method for Cushioning Properties of Athletic Shoes Using an Impact Test

  • ASTM F1977 : Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum CleanerSystem

  • ASTM F1977-04 : Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System

  • ASTM F1978 : Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Usingthe TaberTM Abraser

  • ASTM F1978-00E01 : Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber|Pt Abraser

  • ASTM F1979 : Specification for Paintballs Used in the Sport of Paintball

  • ASTM F1979-04 : Specification for Paintballs Used in the Sport of Paintball

  • ASTM F1980-02 : Guide for Accelerated Aging of Sterile Medical Device Packages

  • ASTM F1981 : Specification for Suction Catheters for Use in the Respiratory Tract

  • ASTM F1981-99 : Specification for Suction Catheters for Use in the Respiratory Tract

  • ASTM F1982 : Test Methods for Analyzing Organic Contaminants on Silicon Wafer Surfaces by ThermalDesorption Gas Chromatography (Withdrawn 2003) No Replacement

  • ASTM F1982-99e1 : Test Methods for Analyzing Organic Contaminants on Silicon Wafer Surfaces by Thermal Desorption Gas Chromatography (Withdrawn 2003)

  • ASTM F1983 : Practice for Assessment of Compatibiltiy of Absorbable/Resorbable Biomaterials for ImplantApplications

  • ASTM F1983-99R03 : Practice for Assessment of Compatibility of Absorbable/Resorbable Biomaterials for Implant Applications

  • ASTM F1984 : Practice for Testing for Whole Complement Activation in Serum by Solid Materials

  • ASTM F1984-99R03 : Practice for Testing for Whole Complement Activation in Serum by Solid Materials

  • ASTM F1985 : Specification for Pneumatic Operated, Globe Style, Control Valves

  • ASTM F1985-99R05 : Specification for Pneumatic-Operated, Globe-Style, Control Valves

  • ASTM F1986 : Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints forHot and Cold Drinking Water Systems

  • ASTM F1986-01 : Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems

  • ASTM F1987 : Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints forHydronic Heating Systems

  • ASTM F1987-01 : Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems

  • ASTM F1988 : Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, WithAdjustable Backs, for Outdoor Use

  • ASTM F1988-99R04E01 : Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use

  • ASTM F1989 : Specification for Cooking Fire Suppression Blankets

  • ASTM F1989-05 : Specification for Cooking Fire Suppression Blankets

  • ASTM F1990 : Guide for In Situ Burning of Spilled Oil : Ignition Devices

  • ASTM F1990-99 : Guide for In-Situ Burning of Spilled Oil : Ignition Devices

  • ASTM F1991 : Test Method for Performance of Chinese (Wok) Ranges

  • ASTM F1991-99 : Test Method for Performance of Chinese (Wok) Ranges

  • ASTM F1992 : Practice for Reprocessing of Reusable, Heat Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes

  • ASTM F1992-99 : Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes

  • ASTM F1993 : Classification of Human Search and Rescue Resources

  • ASTM F1993-99R05 : Classification System of Human Search and Rescue Resources

  • ASTM F1994 : Test Method for Shipboard Fixed Foam Firefighting Systems

  • ASTM F1994-99R05 : Test Method for Shipboard Fixed Foam Firefighting Systems

  • ASTM F1995 : Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) byApplying Shear Force on a Membrane Switch

  • ASTM F1995-00 : Test Method for Determining the Bond Strength of a Surface Mount Device (SMD) on a Membrane Switch by Applying Shear Force

  • ASTM F1996 : Test Method for Silver Migration for Membrane Switch Circuitry

  • ASTM F1996-01 : Test Method for Silver Migration for Membrane Switch Circuitry

  • ASTM F1997 : Test Method for Determining the Sensitivity (Teasing) of a Tactile Membrane Switch

  • ASTM F1997-99R05 : Test Method for Determining the Sensitivity (Teasing) of a Tactile Membrane Switch

  • ASTM F1999 : Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems

  • ASTM F1999-00 : Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems

  • ASTM F2000 : Guide for Fences for Ballfields and Other Sports Facilities

  • ASTM F2000-00A : Guide for Fences for Ballfields and Other Sports Facilities

  • ASTM F2001 : Guide for Vessel Related Technical Information for Use in Developing an Electronic Databaseand Ship Safety Record

  • ASTM F2001-01 : Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record

  • ASTM F2002 : Terminology Relating to Anesthesia and Respiratory Equipment

  • ASTM F2002-01c : Termninology Relating to Anesthesia and Respiratory Equipment (Withdrawn 2002)

  • ASTM F2003 : Practice for Accelerated Aging of Ultra High Molecular Weight Polyethylene after GammaIrradiation in Air

  • ASTM F2003-02 : Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air

  • ASTM F2004 : Test Method for Transformation Temperature of Nickel Titanium Alloys by Thermal Analysis

  • ASTM F2005 : Terminology for Nickel Titanium Shape Memory Alloys

  • ASTM F2005-00 : Terminology for Nickel-Titanium Shape Memory Alloys

  • ASTM F2006 : Safety Specification for Window Fall Prevention Devices for Non Emergency Escape (Egress) and Rescue (Ingress) Windows

  • ASTM F2006-00 : Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows

  • ASTM F2006-03 : Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis

  • ASTM F2007 : Practice for Classification, Design, Manufacture, and Operation of Concession Go Karts andFacilities

  • ASTM F2007-00 : Practice for Classification, Design, Manufacture, and Operation of Concession Go-Karts and Facilities

  • ASTM F2008 : Guide for Qualitative Observations of Skimmer Performance

  • ASTM F2008-00 : Guide for Qualitative Observations of Skimmer Performance

  • ASTM F2009 : Test Method for Determining the Axial Disassembly Force of Taper Connections of ModularProstheses

  • ASTM F2009-00 : Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses

  • ASTM F2010 : Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a ModifiedPegboard Test

  • ASTM F2010-00R05 : Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a Modified Pegboard Test

  • ASTM F2011-02E01 : Specification for Safety and Performance of Fun-Karts

  • ASTM F2012-03 : Consumer Safety Performance Specification for Stationary Activity Centers

  • ASTM F2013 : Test Method for Determination of Residual Acetaldehyde in Polyethylene TerephthalateBottle Polymer Using an Automated Static Head Space Sampling Device and a Capillary GC with aFlame Ionization Detector

  • ASTM F2013-01 : Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector

  • ASTM F2014 : Specification for Non Reinforced Extruded Tee Connections for Piping Applications

  • ASTM F2014-00 : Specification for Non-Reinforced Extruded Tee Connections for Piping Applications

  • ASTM F2015 : Specification for Lap Joint Flange Pipe End Applications

  • ASTM F2015-00 : Specification for Lap Joint Flange Pipe End Applications

  • ASTM F2016 : Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, andCoatings

  • ASTM F2016-00 : Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings

  • ASTM F2017 : Guide for Database Structure of Electronic Data Interchange Between Ship Owner andShipyard for Contract Administration

  • ASTM F2017-00 : Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration

  • ASTM F2018 : Test Method for Time to Failure of Plastics Using Plane Strain Tensile Specimens

  • ASTM F2018-00E01 : Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens

  • ASTM F2019-03 : Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)

  • ASTM F2020 : Practice for Design, Construction, and Procurement of Emergency Medical Services Systems(EMSS) Ambulances

  • ASTM F2020-02A : Practice for Design, Construction, and Procurement of Emergency Medical Services Systems (EMSS) Ambulances

  • ASTM F2021-00 : Specification for Design and Installation of Plastic Syphonic Roof Drainage Systems

  • ASTM F2022 : Test Method for Performance of Booster Heaters

  • ASTM F2022-00 : Test Method for Performance of Booster Heaters

  • ASTM F2023-04 : Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water

  • ASTM F2024 : Practice for X ray Diffraction Determination of Phase Content of Plasma SprayedHydroxyapatite Coatings

  • ASTM F2024-00 : Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings

  • ASTM F2025 : Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment

  • ASTM F2025-00 : Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment

  • ASTM F2026 : Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications

  • ASTM F2026-02 : Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications

  • ASTM F2027-00E01 : Guide for Characterization and Testing of Substrate Materials for Tissue-Engineered Medical Products

  • ASTM F2028 : Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation

  • ASTM F2028-02 : Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation

  • ASTM F2029 : Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs asMeasured by Seal Strength

  • ASTM F2029-00 : Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength

  • ASTM F2030-00 : Specification for Paintball Cylinder Burst Disk Assemblies

  • ASTM F2031 : Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)

  • ASTM F2031-00 : Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)

  • ASTM F2032 : Specification for Helmets Used for BMX Cycling

  • ASTM F2032-00 : Specification for Helmets Used for BMX Cycling

  • ASTM F2033 : Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made ofMetallic, Ceramic, and Polymeric Materials

  • ASTM F2033-05 : Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials

  • ASTM F2034 : Specification for Sheet Linoleum Floor Covering

  • ASTM F2034-03 : Specification for Sheet Linoleum Floor Covering

  • ASTM F2035 : Practice for Measuring the Dark Stability of Ink Jet Prints

  • ASTM F2035-00 : Practice for Measuring the Dark Stability of Ink Jet Prints

  • ASTM F203-55 : Method of Test for Strength of Welded Joints of Lead Wires for Electronic Devices and Lamps (Withdrawn 1965)

  • ASTM F2036 : Test Method for Evaluation of Larger Area Density and Background on ElectrophotographicPrinters

  • ASTM F2036-04 : Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers

  • ASTM F2037 : Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions inTypical Office Environments

  • ASTM F2037-00 : Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments

  • ASTM F2038 : Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part IFormulations and Uncured Materials

  • ASTM F2038-00R05 : Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I\MFormulations and Uncured Materials

  • ASTM F2039 : Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program

  • ASTM F2039-00 : Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program

  • ASTM F204 : Test Method for Surface Flaws in Tungsten Seal Rod and Wire

  • ASTM F2040-02 : Specification for Helmets Used for Recreational Snow Sports

  • ASTM F2041 : Specification for Paintball Marker Warnings

  • ASTM F2041-00 : Specification for Paintball Marker Warnings

  • ASTM F2042 : Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part IICrosslinking and Fabrication

  • ASTM F2042-00R05 : Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II\MCrosslinking and Fabrication

  • ASTM F2043-00 : Classification for Bicycle Usage

  • ASTM F2044-00 : Specification for Liquid Level Indicating Equipment, Electrical

  • ASTM F2045 : Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, TubularGlass/Plastic

  • ASTM F2045-00 : Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic

  • ASTM F2046 : Specification for Tachometers, Various

  • ASTM F2046-00 : Specification for Tachometers, Various

  • ASTM F2047 : Practice for Workers’ Compensation Coverage of Emergency Services Volunteers

  • ASTM F2047-00 : Practice for Workers’ Compensation Coverage of Emergency Services Volunteers

  • ASTM F2048 : Practice for Reporting Slip Resistance Test Results

  • ASTM F2048-00 : Practice for Reporting Slip Resistance Test Results

  • ASTM F2049 : Guide for Fences/Barriers for Public, Commercial, and Multi Family Residential Use OutdoorPlay Areas

  • ASTM F2049-03 : Guide for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas

  • ASTM F205 : Test Method for Measuring Diameter of Fine Wire by Weighing

  • ASTM F2050 : Consumer Safety Performance Specification for Hand Held Infant Carriers

  • ASTM F2050-03 : Consumer Safety Specification for Hand-Held Infant Carriers

  • ASTM F2051 : Specification for Implantable Saline Filled Breast Prosthesis

  • ASTM F2051-00 : Specification for Implantable Saline Filled Breast Prosthesis

  • ASTM F2052 : Test Method for Measurement of Magnetically Induced Displacement Force on MedicalDevices in the Magnetic Resonance Environment

  • ASTM F2052-02 : Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment

  • ASTM F2053 : Guide for Documenting the Results of Airborne Particle Penetration Testing of ProtectiveClothing Materials

  • ASTM F2053-00 : Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials

  • ASTM F2054 : Test Method for Burst Testing of Flexible Package Seals Using Internal Air PressurizationWithin Restraining Plates

  • ASTM F2054-00 : Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates

  • ASTM F2055 : Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method

  • ASTM F2055-00 : Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method

  • ASTM F2056-00 : Safety and Performance Specification for Soccer Goals

  • ASTM F2057 : Safety Specification for Chests, Door Chests, and Dressers

  • ASTM F2057-04 : Safety Specification for Chests, Door Chests, and Dressers

  • ASTM F2058-00 : Specification for Cautionary Labeling for Candles Burned in a Home

  • ASTM F2059 : Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask

  • ASTM F2059-00 : Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask

  • ASTM F2060 : Guide for Maintaining Cool Season Turfgrasses on Athletic Fields

  • ASTM F2060-00R05 : Guide for Maintaining Cool Season Turfgrasses on Athletic Fields

  • ASTM F2061 : Practice for Chemical Protective Clothing Care and Maintenance Instructions

  • ASTM F2061-00 : Practice for Chemical Protective Clothing Care and Maintenance Instructions

  • ASTM F2062 : Specification for Square Drive Interconnections on Surgical Instruments

  • ASTM F2062-00 : Specification for Square Drive Interconnections on Surgical Instruments

  • ASTM F2063 : Specification for Wrought Nickel Titanium Shape Memory Alloys for Medical Devices andSurgical Implants

  • ASTM F2063-00 : Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants

  • ASTM F2064 : Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use inBiomedical and Tissue Engineered Medical Products Application

  • ASTM F2064-00 : Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue\NEngineered Medical Products Application

  • ASTM F2065 : Practice for Testing for Alternative Pathway Complement Activation in Serum by SolidMaterials

  • ASTM F2065-00E01 : Practice for Testing for Alternative Pathway Complement Activation in Serum by Solid Materials

  • ASTM F2066 : Specification for Wrought Titanium 15 Molybdenum Alloy for Surgical Implant Applications(UNS R58150)

  • ASTM F20-66(1986) : Specification for High Conductivity Composite Aluminum-Steel-Copper Strip for Electron Tubes (Withdrawn 1992)

  • ASTM F2066-01 : Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)

  • ASTM F2067 : Practice for Development and Use of Oil Spill Trajectory Models

  • ASTM F2067-00 : Practice for Development and Use of Oil-Spill Trajectory Models

  • ASTM F2068 : Specification for Femoral Prostheses/Metallic Implants

  • ASTM F2068-03 : Specification for Femoral Prostheses\MMetallic Implants

  • ASTM F2069 : Practice for Evaluation of Explosives Vapor Detectors

  • ASTM F2069-00 : Practice for Evaluation of Explosives Vapor Detectors

  • ASTM F2070 : Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber Optic

  • ASTM F2070-00 : Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic

  • ASTM F2071 : Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), FiberOptic

  • ASTM F2071-00 : Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic

  • ASTM F2072 : Practice for Hosedown of a Membrane Switch

  • ASTM F2072-01 : Practice for Hosedown of a Membrane Switch

  • ASTM F2073 : Test Method for Non Destructive Short Circuit Testing of a Membrane Switch

  • ASTM F2073-01 : Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch

  • ASTM F2074 : Guide for Measuring Diameter of Silicon and Other Semiconductor Wafers (Withdrawn 2003) No Replacement

  • ASTM F2074-00 : Guide for Measuring Diameter of Silicon and Other Semiconductor Wafers (Withdrawn 2003)

  • ASTM F2075-04 : Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment

  • ASTM F2076 : Practice for Communicating an EMS Patient Report to Receiving Medical Facilities

  • ASTM F2076-01 : Practice for Communicating an EMS Patient Report to Receiving Medical Facilities

  • ASTM F2077 : Test Methods For Intervertebral Body Fusion Devices

  • ASTM F2077-03 : Test Methods For Intervertebral Body Fusion Devices

  • ASTM F2078-01 : Terminology Relating to Hydrogen Embrittlement Testing

  • ASTM F2079 : Test Method for Measuring Intrinsic Elastic Recoil of Balloon Expandable Stents

  • ASTM F2079-02 : Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents

  • ASTM F2080 : Specification for Cold Expansion Fittings With Metal Compression Sleeves for Cross LinkedPolyethylene (PEX) Pipe

  • ASTM F2080-04 : Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe

  • ASTM F2081 : Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents

  • ASTM F2081-01 : Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents

  • ASTM F2082 : Test Method for Determination of Transformation Temperature of Nickel Titanium ShapeMemory Alloys by Bend and Free Recovery

  • ASTM F2082-03 : Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery

  • ASTM F2083-04 : Specification for Total Knee Prosthesis

  • ASTM F2084 : Guide for Collecting Containment Boom Performance Data in Controlled Environments

  • ASTM F2084-01 : Guide for Collecting Containment Boom Performance Data in Controlled Environments

  • ASTM F2085 : Consumer Safety Specification for Portable Bed Rails

  • ASTM F2085-03E01 : Consumer Safety Specification for Portable Bed Rails

  • ASTM F2086 : Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets, Method 2

  • ASTM F2086-01 : Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets, Method 2

  • ASTM F2087 : Specification for Packing, Fiberglass, Braided, Rope, and Wick

  • ASTM F2087-01 : Specification for Packing, Fiberglass, Braided, Rope, and Wick

  • ASTM F2088-03 : Consumer Safety Specification for Infant Swings

  • ASTM F2089-01 : Guide for Language Interpretation Services

  • ASTM F2090-01A : Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms

  • ASTM F2091 : Specification for Acetabular Prostheses

  • ASTM F2091-01 : Specification for Acetabular Prostheses

  • ASTM F2092 : Specification for Convection Oven Gas or Electric

  • ASTM F2092-01 : Specification for Convection Oven Gas or Electric

  • ASTM F2093-01E01 : Test Method for Performance of Rack Ovens

  • ASTM F2094 : Specification for Silicon Nitride Bearing Balls

  • ASTM F2094-03A : Specification for Silicon Nitride Bearing Balls

  • ASTM F2095-01 : Test Methods for Pressure Decay Leak Test for Nonporous Flexible Packages With and Without Restraining Plates

  • ASTM F2096 : Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization(Bubble Test)

  • ASTM F2096-04 : Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)

  • ASTM F2097-01 : Guide for Design and Evaluation of Primary Packaging for Medical Products

  • ASTM F2098 : Specification for Stainless Steel Clamps for Securing SDR9 Cross linked Polyethylene (PEX) Tubing to Metal Insert Fittings

  • ASTM F2098-04 : Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings

  • ASTM F2099 : Guide for Use of Universal Transverse Mercator (UTM) Grids When Preparing and Using aField Map for Land Search

  • ASTM F2099-01 : Guide for Use of Universal Transverse Mercator (UTM) Grids When Preparing and Using a Field Map for Land Search

  • ASTM F21 : Test Method for Hydrophobic Surface Films by the Atomizer Test

  • ASTM F2100 : Specification for Performance of Materials Used in Medical Face Masks

  • ASTM F2100-04 : Specification for Performance of Materials Used in Medical Face Masks

  • ASTM F2101 : Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face MaskMaterials, Using a Biological Aerosol of Staphylococcus aureus

  • ASTM F2101-01 : Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus

  • ASTM F2102 : Guide for Evaluating the Extent of Oxidation in Ultra High Molecular Weight PolyethyleneFabricated Forms Intended for Surgical Implants

  • ASTM F2102-01E01 : Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants

  • ASTM F2103 : Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended forUse in Biomedical and Tissue Engineered Medical Product Applications

  • ASTM F2103-01 : Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications

  • ASTM F2105-04 : Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems

  • ASTM F2106-03 : Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills

  • ASTM F2107-01E01 : Guide for Construction and Maintenance of Skinned Areas on Sports Fields

  • ASTM F2108 : Practice for Inspection of Transparent Parts by Prism

  • ASTM F2108-01 : Practice for Inspection of Transparent Parts by Prism

  • ASTM F2109 : Test Method to Determine Color Change and Staining Caused by Aircraft MaintenanceChemicals upon Aircraft Cabin Interior Hard Surfaces

  • ASTM F2109-01R05 : Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces

  • ASTM F2111 : Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by AircraftChemical Processes

  • ASTM F2111-01A : Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes

  • ASTM F2112 : Terminology for Membrane Switches

  • ASTM F2112-02 : Terminology for Membrane Switches

  • ASTM F2113 : Guide for Analysis and Reporting the Impurity Content and Grade of High Purity MetallicSputtering Targets for Electronic Thin Film Applications

  • ASTM F2113-01E01 : Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications

  • ASTM F2114 : Guide for ASTM Test Methods, Standard Practices, and Typical Values of aMembrane Switch

  • ASTM F2114-02 : Guide for Test Methods, Standard Practices, and Typical Values of a Membrane Switch

  • ASTM F2115-05 : Specification for Motorized Treadmills

  • ASTM F2116 : Specification for Low Stretch and Static Kernmantle Life Safety Rope

  • ASTM F2116-01 : Specification for Low Stretch and Static Kernmantle Life Safety Rope

  • ASTM F2117-01 : Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement

  • ASTM F2118-03 : Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials

  • ASTM F2119 : Test Method for Evaluation of MR Image Artifacts from Passive Implants

  • ASTM F2119-01 : Test Method for Evaluation of MR Image Artifacts from Passive Implants

  • ASTM F2120 : Practice for Testing Treestand Load Capacity

  • ASTM F2120-01 : Practice for Testing Treestand Load Capacity

  • ASTM F2121 : Practice for Treestand Labels

  • ASTM F2121-01 : Practice for Treestand Labels

  • ASTM F2122-01 : Practice for Treestand Safety Devices

  • ASTM F2123 : Practice for Treestand Instructions

  • ASTM F2123-01 : Practice for Treestand Instructions

  • ASTM F2124 : Practice for Testing Treestand Ladder, Tripod Stand and Climbing Stick Load Capacity

  • ASTM F2124-01 : Practice for Testing Ladder Treestand, Tripod Treestand and Climbing Stick Load Capacity

  • ASTM F2125-01 : Test Method for Treestand Static Stability

  • ASTM F2126 : Test Method for Treestand Static Load Capacity

  • ASTM F2126-01 : Test Method for Treestand Static Load Capacity

  • ASTM F2127 : Test Method for Treestand Adherence (Withdrawn 2006) Replaced by F2125 0 ASTM 0

  • ASTM F2127-01 : Test Method for Treestand Adherence

  • ASTM F2128 : Test Method for Treestand Repetitive Loading Capability

  • ASTM F2128-01 : Test Method for Treestand Repetitive Loading Capability

  • ASTM F2129 : Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determinethe Corrosion Susceptibility of Small Implant Devices

  • ASTM F2129-04 : Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

  • ASTM F2130 : Test Method for Measuring Repellency, Retention, and Penetration of Liquid PesticideFormulation Through Protective Clothing Materials

  • ASTM F2130-01 : Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials

  • ASTM F2131 : Test Method forIn Vitro Biological Activity of Recombinant Human Bone MorphogeneticProtein 2 (rhBMP 2) Using the W 20 Mouse Stromal Cell Line

  • ASTM F2131-02 : Test Method for Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line

  • ASTM F2132 : Specification for Puncture Resistance of Materials Used in Containers for Discarded MedicalNeedles and Other Sharps

  • ASTM F2132-01 : Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps

  • ASTM F2133 : Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Insulated MarineBulkheads and Decks, Constructed of Steel

  • ASTM F2133-01 : Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Insulated Marine Bulkheads and Decks, Constructed of Steel

  • ASTM F2135 : Specification for Molded Drain, Waste, and Vent (DWV) Short Pattern Plastic Fittings

  • ASTM F2135-01 : Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings

  • ASTM F2136 : An American National Standard Test Method for Notched, Constant Ligament-Stress (NCLS)

  • ASTM F2136-01E01 : Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe

  • ASTM F2137 : Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices

  • ASTM F2137-04 : Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices

  • ASTM F2138-01E01 : Specification for Excess Flow Valves for Natural Gas Service

  • ASTM F2139 : Test Method for Measuring Nitrogen Concentration in Silicon Substrates by Secondary IonMass Spectrometry (Withdrawn 2003) No Replacement

  • ASTM F2139-01 : Test Method for Measuring Nitrogen Concentration in Silicon Substrates by Secondary Ion Mass Spectrometry (Withdrawn 2003)

  • ASTM F2140-01 : Test Method for Performance of Hot Food Holding Cabinets

  • ASTM F2141 : Test Method for Performance of Hot Deli Cases

  • ASTM F2141-01 : Test Method for Performance of Hot Deli Cases

  • ASTM F2142 : Test Method for Performance of Drawer Warmers

  • ASTM F2142-01 : Test Method for Performance of Drawer Warmers

  • ASTM F2143 : Test Method for Performance of Refrigerated Buffet and Preparation Tables

  • ASTM F2143-04 : Test Method for Performance of Refrigerated Buffet and Preparation Tables

  • ASTM F2144-01E01 : Test Method for Performance of Large Open Vat Fryers

  • ASTM F2145-01 : Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing

  • ASTM F2146 : Specification for Wrought Titanium 3Aluminum 2.5Vanadium Alloy Seamless Tubing forSurgical Implant Applications (UNS R56320)

  • ASTM F2146-01 : Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)

  • ASTM F2147 : Practice for Guinea Pig : Split Adjuvant and Closed Patch Testing for Contact Allergens

  • ASTM F2147-01 : Practice for Guinea Pig : Split Adjuvant and Closed Patch Testing for Contact Allergens

  • ASTM F2148 : Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local LymphNode Assay (LLNA)

  • ASTM F2148-01 : Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA)

  • ASTM F2149 : Test Method for Automated Analyses of Cells/the Electrical Sensing Zone Method ofEnumerating and Sizing Single Cell Suspensions

  • ASTM F2149-01 : Test Method for Automated Analyses of Cells\Mthe Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions

  • ASTM F2150 : Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue EngineeredMedical Products

  • ASTM F2150-02E01 : Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products

  • ASTM F2151 : Practice for Assessment of White Blood Cell Morphology After Contact with Materials

  • ASTM F2151-01 : Practice for Assessment of White Blood Cell Morphology After Contact with Materials

  • ASTM F2152 : Guide for In Situ Burning of Spilled Oil : Fire Resistant Boom

  • ASTM F2152-01 : Guide for In-Situ Burning of Spilled Oil : Fire-Resistant Boom

  • ASTM F2153-01 : Test Method for Measurement of Backpack Capacity

  • ASTM F2154 : Specification for Sound Absorbing Board, Fibrous Glass, Perforated Fibrous Glass ClothFaced

  • ASTM F2154-01 : Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced

  • ASTM F2155 : Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals

  • ASTM F2155-01 : Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals

  • ASTM F2156 : Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope

  • ASTM F2156-01 : Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope

  • ASTM F2157-02 : Specification for Synthetic Surfaced Running Tracks

  • ASTM F2158 : Specification for Residential Central Vacuum Tube and Fittings

  • ASTM F2158-01 : Specification for Residential Central-Vacuum Tube and Fittings

  • ASTM F2159-03E01 : Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing

  • ASTM F2160-01 : Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)

  • ASTM F2161 : Guide for Instrument and Precision Bearing Lubricants Part 1 Oils

  • ASTM F2161-01 : Guide for Instrument and Precision Bearing Lubricants\MPart 1 Oils

  • ASTM F2162 : Specification for Bearing, Roller, Needle : Drawn Outer Ring, Full Complement, Without InnerRing, Open and Closed End, Standard Type

  • ASTM F2162-01E02 : Specification for Bearing, Roller, Needle : Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type

  • ASTM F2163 : Specification for Ring, Bearing, Inner : for Needle Roller Bearing With Drawn Outer Ring

  • ASTM F2163-01E01 : Specification for Ring, Bearing, Inner : for Needle Roller Bearing With Drawn Outer Ring

  • ASTM F2164 : Practice for Field Leak Testing of Polyethylene (PE) and CrosslinkedPolyethylene (PEX)

  • ASTM F2164-02 : Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure

  • ASTM F2165 : Specification for Flexible Pre Insulated Piping

  • ASTM F2165-02 : Specification for Flexible Pre-Insulated Piping

  • ASTM F2166 : Practices for Monitoring Non Contact Dielectric Characterization Systems Through Use ofSpecial Reference Wafers (Withdrawn 2003) No Replacement

  • ASTM F2166-02 : Practices for Monitoring Non-Contact Dielectric Characterization Systems Through Use of Special Reference Wafers (Withdrawn 2003)

  • ASTM F2167 : Consumer Safety Specification for Infant Bouncer Seats

  • ASTM F2167-05A : Consumer Safety Specification for Infant Bouncer Seats

  • ASTM F2168 : Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and DieFormed Ring

  • ASTM F2168-02 : Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring

  • ASTM F2169 : Specification for Resilient Stair Treads

  • ASTM F2169-02 : Specification for Resilient Stair Treads

  • ASTM F2170 : Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes

  • ASTM F2170-02 : Test Method for Determining Relative Humidity in Concrete Floor Slabs Using Probes

  • ASTM F2171 : Guide for Defining the Performance of First Aid Providers in Occupational Settings

  • ASTM F2171-02 : Guide for Defining the Performance of First Aid Providers in Occupational Settings

  • ASTM F2174 : Practice for Verifying Acoustic Emission Sensor Response

  • ASTM F2174-02 : Practice for Verifying Acoustic Emission Sensor Response

  • ASTM F2175-02 : Specification for Portable Escape Ladder for Residential Use

  • ASTM F2176 : Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct

  • ASTM F2176-02 : Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct

  • ASTM F2178-02 : Test Method for Determining The Arc Rating Of Face Protective Products

  • ASTM F2179-02 : Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers

  • ASTM F218 : Test Method for Analyzing Stress in Glass

  • ASTM F2180 : Specification for Metallic Implantable Strands and Cables

  • ASTM F2180-02 : Specification for Metallic Implantable Strands and Cables

  • ASTM F2181 : Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants

  • ASTM F2181-02A : Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants

  • ASTM F2182 : Test Method for Measurement of Radio Frequency Induced Heating Near Passive ImplantsDuring Magnetic Resonance Imaging

  • ASTM F2182-02A : Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging

  • ASTM F2183 : Test Method for Small Punch Testing of Ultra High Molecular Weight Polyethylene Used inSurgical Implants

  • ASTM F2183-02 : Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants

  • ASTM F2184-02 : Guide for Installation of Paintball Barrier Netting

  • ASTM F2187 : Test Method for Determining the Effect of Random Frequency Vibration on a MembraneSwitch or Membrane Switch Assembly

  • ASTM F2187-02 : Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly

  • ASTM F2188 : Test Method for Determining the Effect of Variable Frequency Vibration on a MembraneSwitch or Membrane Switch Assembly

  • ASTM F2188-02 : Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly

  • ASTM F219 : Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps

  • ASTM F2191 : Specification for Packing Material, Graphitic or Carbon Braided Yarn

  • ASTM F2191-02 : Specification for Packing Material, Graphitic or Carbon Braided Yarn

  • ASTM F2192 : Test Method for Determining and Reporting the Berthing Energy and Reaction of MarineFenders

  • ASTM F2192-05 : Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders

  • ASTM F2193 : Specifications and Test Methods for Components Used in the Surgical Fixation of the SpinalSkeletal System

  • ASTM F2193-02 : Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System

  • ASTM F2194 : Consumer Safety Specification for Bassinets and Cradles

  • ASTM F2194-04A : Consumer Safety Specification for Bassinets and Cradles

  • ASTM F2195 : Specification for Linoleum Floor Tile

  • ASTM F2195-03 : Specification for Linoleum Floor Tile

  • ASTM F2199 : Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure toHeat

  • ASTM F2199-02 : Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat

  • ASTM F22 : Test Method for Hydrophobic Surface Films by the Water Break Test

  • ASTM F2200 : Specification for Automated Vehicular Gate Construction

  • ASTM F2200-02 : Specification for Automated Vehicular Gate Construction

  • ASTM F2201-02E01 : Consumer Safety Specification for Utility Lighters

  • ASTM F2202 : Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets

  • ASTM F2202-02 : Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets

  • ASTM F2203 : Test Method for Linear Measurement Using Precision Steel Rule

  • ASTM F2203-02E01 : Test Method for Linear Measurement Using Precision Steel Rule

  • ASTM F2204 : Guide for Describing Shoreline Response Techniques

  • ASTM F2204-02 : Guide for Describing Shoreline Response Techniques

  • ASTM F2205 : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil SpillResponse : Tropical Environments

  • ASTM F2205-02 : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response : Tropical Environments

  • ASTM F2206-02 : Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock

  • ASTM F2207 : Specification for Cured in Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe

  • ASTM F2207-02 : Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe

  • ASTM F2208-02E01 : Specification for Pool Alarms

  • ASTM F2209 : Guide for Training of Level I Land Search Team Member

  • ASTM F2209-03 : Guide for Training of Level I Land Search Team Member

  • ASTM F221 : Terminology Relating to Carbon Paper and Inked Ribbon Products and Images MadeTherefrom

  • ASTM F2210 : Guide for Processing Cells, Tissues, and Organs for Use in Tissue Engineered MedicalProducts

  • ASTM F2210-02 : Guide for Processing Cells, Tissues, and Organs for Use in Tissue Engineered Medical Products

  • ASTM F2211 : Classification for Tissue Engineered Medical Products (TEMPs)

  • ASTM F2211-04 : Classification for Tissue Engineered Medical Products (TEMPs)

  • ASTM F2212 : Guide for Characterization of Type I Collagen as a Starting Material for Surgical Implantsand Substrates for Tissue Engineered Medical Products (TEMPs)

  • ASTM F2212-02 : Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)

  • ASTM F2213 : Test Method for Measurement of Magnetically Induced Torque on Medical Devices in theMagnetic Resonance Environment

  • ASTM F2213-04 : Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment

  • ASTM F2214 : Test Method forIn Situ Determination of Network Parameters of Crosslinked Ultra HighMolecular Weight Polyethylene (UHMWPE)

  • ASTM F2214-02 : Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)

  • ASTM F2215 : Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, andBearing Applications

  • ASTM F2215-03E01 : Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications

  • ASTM F2216-05 : Specification for Selectorized Strength Equipment

  • ASTM F2217 : Practice for Coating/Adhesive Weight Determination

  • ASTM F2217-02 : Practice for Coating/Adhesive Weight Determination

  • ASTM F2218 : Guide for Hardware Implementation for Computerized Systems

  • ASTM F2218-02 : Guide for Hardware Implementation for Computerized Systems

  • ASTM F2219-04 : Test Methods for Measuring High Speed Baseball Bat Performance Factor

  • ASTM F2220 : Specification for Headforms

  • ASTM F2220-02 : Specification for Headforms

  • ASTM F2223-04 : Guide for Standards on Playground Surfacing

  • ASTM F2224 : Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants

  • ASTM F2224-03 : Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants

  • ASTM F2225-03E01 : Safety Specification for Consumer Trampoline Enclosures

  • ASTM F2226 : Practice for Determining the Adhesion of Prints and Laminating Films

  • ASTM F2226-03 : Practice for Determining the Adhesion of Prints and Laminating Films

  • ASTM F2227 : Test Method for Non Destructive Detection of Leaks in Non sealed and Empty MedicalPackaging Trays by CO2 Tracer Gas Method

  • ASTM F2227-02 : Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO2 Tracer Gas Method

  • ASTM F2228 : Test Method for Non Destructive Detection of Leaks in Medical Packaging WhichIncorporates Porous Barrier Material by CO2 Tracer Gas Method

  • ASTM F2228-02 : Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method

  • ASTM F2229 : Specification for Wrought, Nitrogen Strengthened 23Manganese 21Chromium 1MolybdenumLow Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)

  • ASTM F2229-02 : Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)

  • ASTM F2230 : Guide for In situ Burning of Oil Spills on Water : Ice Conditions

  • ASTM F2230-02 : Guide for In-situ Burning of Oil Spills on Water : Ice Conditions

  • ASTM F2231 : Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in PressurizedPipes

  • ASTM F2231-02E01 : Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes

  • ASTM F2232 : Test Method for Determining the Longitudinal Load Required to Detach High Heels fromFootwear

  • ASTM F2232-03 : Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear

  • ASTM F2233 : Guide for Safety, Access Rights, Construction, Liability, and Risk Management for OpticalFiber Networks in Existing Sewers

  • ASTM F2233-03 : Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers

  • ASTM F2234-03 : Specification for Portable Gasoline and Kerosine Spill Resistant Fueling Systems for Consumer Use

  • ASTM F2236-03 : Consumer Safety Specification for Soft Infant Carriers

  • ASTM F2237 : Test Method for Performance of Upright Overfired Broilers

  • ASTM F2237-03 : Test Method for Performance of Upright Overfired Broilers

  • ASTM F2238-03 : Test Method for Performance of Rapid Cook Ovens

  • ASTM F2239-03E01 : Test Method for Performance of Conveyor Broilers

  • ASTM F2240 : Specification for Manufacturer Quality Assurance Program for Powered Parachute Aircraft

  • ASTM F2240-05 : Specification for Manufacturer Quality Assurance Program for Powered Parachute Aircraft

  • ASTM F2241 : Specification for Continued Airworthiness System for Powered Parachute Aircraft

  • ASTM F2241-05A : Specification for Continued Airworthiness System for Powered Parachute Aircraft

  • ASTM F2242 : Specification for Production Acceptance Testing System for Powered Parachute Aircraft

  • ASTM F2242-05 : Specification for Production Acceptance Testing System for Powered Parachute Aircraft

  • ASTM F2243 : Specification for Required Product Information to be Provided with Powered ParachuteAircraft

  • ASTM F2243-05 : Specification for Required Product Information to be Provided with Powered Parachute Aircraft

  • ASTM F2244 : Specification for Design and Performance Requirements for Powered Parachute Aircraft

  • ASTM F2244-05 : Specification for Design and Performance Requirements for Powered Parachute Aircraft

  • ASTM F2245 : Specification for Design and Performance of a Light Sport Airplane

  • ASTM F2245-04 : Specification for Design and Performance of a Light Sport Airplane

  • ASTM F2246 : Specification for Bearing, Roller, Needle : Thick Outer Ring With Rollers and Cage

  • ASTM F2246-03 : Specification for Bearing, Roller, Needle : Thick Outer Ring With Rollers and Cage

  • ASTM F2247 : Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static LoadMethod)

  • ASTM F2247-03 : Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)

  • ASTM F2248 : Practice for Specifying an Equivalent 3 Second Duration Design Loading for Blast ResistantGlazing Fabricated with Laminated Glass

  • ASTM F2248-03 : Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass

  • ASTM F2249 : Specification for In Service Test Methods for Temporary Grounding Jumper Assemblies Usedon De Energized Electric Power Lines and Equipment

  • ASTM F2249-03 : Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment

  • ASTM F2250 : Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on FlexiblePackaging Materials

  • ASTM F2250-03 : Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials

  • ASTM F2251 : Test Method for Thickness Measurement of Flexible Packaging Material

  • ASTM F2251-03E01 : Test Method for Thickness Measurement of Flexible Packaging Material

  • ASTM F2252 : Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape

  • ASTM F2252-03 : Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape

  • ASTM F2255 : Test Method for Strength Properties of Tissue Adhesives in Lap Shear by Tension Loading

  • ASTM F2255-05 : Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading

  • ASTM F2256 : Test Method for Strength Properties of Tissue Adhesives in T Peel by Tension Loading

  • ASTM F2256-05 : Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading

  • ASTM F2257 : Specification for Wrought Seamless or Welded and Drawn 18 Chromium 14Nickel2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)

  • ASTM F2257-03 : Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)

  • ASTM F2258 : Test Method for Strength Properties of Tissue Adhesives in Tension

  • ASTM F2258-05 : Test Method for Strength Properties of Tissue Adhesives in Tension

  • ASTM F2259 : Test Method for Determining the Chemical Composition and Sequence in Alginate by ProtonNuclear Magnetic Resonance (1H NMR) Spectroscopy

  • ASTM F2259-03 : Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy

  • ASTM F2260 : Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton NuclearMagnetic Resonance (1H NMR) Spectroscopy

  • ASTM F2260-03 : Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy

  • ASTM F2262 : Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing ODControlled SDR9

  • ASTM F2262-03 : Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9

  • ASTM F2263-03 : Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water

  • ASTM F2264-03 : Consumer Safety Specification for Non-Powered Scooters

  • ASTM F2266 : Specification for Masses Used in Testing Rescue Systems and Components

  • ASTM F2266-03 : Specification for Masses Used in Testing Rescue Systems and Components

  • ASTM F2267 : Test Method for Measuring Load Induced Subsidence of an Intervertebral Body FusionDevice Under Static Axial Compression

  • ASTM F2267-04 : Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression

  • ASTM F2268 : Specification for Bicycle Serial Numbers

  • ASTM F2268-03 : Specification for Bicycle Serial Numbers

  • ASTM F2269-03 : Guide for Maintaining Warm Season Turfgrasses on Athletic Fields

  • ASTM F2270-04 : Guide for Construction and Maintenance of Warning Track Areas on Sports Fields

  • ASTM F2271-03 : Specification for Paintball Marker Barrel Blocking Devices

  • ASTM F2272 : Specification for Paintball Markers (Limited Modes)

  • ASTM F2272-03 : Specification for Paintball Markers (Limited Modes)

  • ASTM F2273-03 : Test Methods for Bicycle Forks

  • ASTM F2274-03 : Specification for Condition 3 Bicycle Forks

  • ASTM F2275-03 : Practice for Treestand Manufacturer Quality Assurance Program

  • ASTM F2276-05 : Specification for Fitness Equipment

  • ASTM F2277-03 : Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment

  • ASTM F2278-03 : Test Method for Evaluating Paintball Barrier Netting

  • ASTM F2279 : Practice for Quality Assurance in the Manufacture of Fixed Wing Light Sport Aircraft

  • ASTM F2279-03 : Practice for Quality Assurance in the Manufacture of Light Sport Airplanes

  • ASTM F2280 : Specification for /Twist Off/ Type Tension Control Structural Bolt/Nut/WasherAssemblies,

  • ASTM F2281 : Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for HeatResistance and High Temperature Applications

  • ASTM F2281-03 : Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

  • ASTM F2282 : Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, andBars for Mechanical Fasteners

  • ASTM F2282-03 : Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

  • ASTM F2283 : Specification for Shipboard Oil Pollution Abatement System

  • ASTM F2283-04 : Specification for Shipboard Oil Pollution Abatement System

  • ASTM F2285-04 : Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use

  • ASTM F2286 : Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, HotTubs, and Spas

  • ASTM F2286-05 : Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas

  • ASTM F2291 : Practice for Design of Amusement Rides and Devices

  • ASTM F2291-05 : Practice for Design of Amusement Rides and Devices

  • ASTM F2292 : Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers UtilizingFour Different Test Methods/Drip, Spray, Submersion and Rub

  • ASTM F2292-03 : Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods\MDrip, Spray, Submersion and Rub

  • ASTM F2293 : Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers

  • ASTM F2293-03 : Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers

  • ASTM F2294 : Practice for Determining the Writeability of Print Media

  • ASTM F2294-03 : Practice for Determining the Writeability of Print Media

  • ASTM F2295 : Practice for Continued Operational Safety Monitoring of a Light Sport Aircraft

  • ASTM F2295-03 : Practice for Continued Operational Safety Monitoring of a Light Sport Airplane

  • ASTM F2296 : Practice for Determining the Adhesion of Lamination Films to Prints Utilizing MechanicalStress : Four Different Test Methods Score/Tape, Cross Hatch, X Cut, and Crease Folding

  • ASTM F2296-04 : Practice for Determining the Adhesion of Lamination Films to Prints Utilizing Mechanical Stress : Four Different Test Methods\MScore/Tape, Cross Hatch, X-Cut, and Crease-Folding

  • ASTM F2298 : Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of ClothingMaterials Using the Dynamic Moisture Permeation Cell

  • ASTM F2298-03 : Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell

  • ASTM F2299 : Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks toPenetration by Particulates Using Latex Spheres

  • ASTM F2299-03 : Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres

  • ASTM F2300 : Test Method for Measuring the Performance of Personal Cooling Systems Using PhysiologicalTesting

  • ASTM F2300-05 : Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing

  • ASTM F2302 : Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant

  • ASTM F2302-03 : Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant

  • ASTM F2303 : Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable andConduits

  • ASTM F2303-03 : Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits

  • ASTM F2304 : Practice for Rehabilitation of Sewers Using Chemical Grouting

  • ASTM F2304-03 : Practice for Rehabilitation of Sewers Using Chemical Grouting

  • ASTM F2306/F2306M : Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile Wall Polyethylene(PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications

  • ASTM F2307 : Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and FittingsBased on Controlled Inside Diameter

  • ASTM F2307-03 : Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter

  • ASTM F2311 : Guide for Classification of Therapeutic Skin Substitutes

  • ASTM F2311-03 : Guide for Classification of Therapeutic Skin Substitutes

  • ASTM F2312-04 : Terminology Relating to Tissue Engineered Medical Products

  • ASTM F2313-03 : Specification for Virgin Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide

  • ASTM F2315 : Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels

  • ASTM F2315-03 : Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels

  • ASTM F2316 : Specification for Airframe Emergency Parachutes for Light Sport Aircraft

  • ASTM F2316-03 : Specification for Airframe Emergency Parachutes for Light Sport Aircraft

  • ASTM F2317/F2317M : Specification for Design of Weight Shift Control Aircraft

  • ASTM F2318 : Specification for Rotary Wing Basic Life Support, Advanced Life Support, and SpecializedMedical Support Air Ambulances

  • ASTM F2318-04 : Specification for Rotary Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances

  • ASTM F2319 : Specification for Fixed Wing Basic Life Support, Advanced Life Support, and SpecializedMedical Support Air Ambulances

  • ASTM F2319-04 : Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances

  • ASTM F2320 : Specification for Rubber Insulating Sheeting

  • ASTM F2320-03 : Specification for Rubber Insulating Sheeting

  • ASTM F2321 : Specification for Flexible Insulated Temporary By Pass Jumpers

  • ASTM F2321-03 : Specification for Flexible Insulated Temporary By-Pass Jumpers

  • ASTM F2322 : Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and CorrectionalFacilities

  • ASTM F2322-03 : Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities

  • ASTM F2324 : Test Method for Prerinse Spray Valves

  • ASTM F2324-03 : Test Method for Prerinse Spray Valves

  • ASTM F2325 : Classification for Multi Layer Steel (MLS) and Other Metal Layer Gaskets for TransportationApplications

  • ASTM F2325-03 : Classification for Multi-Layer Steel (MLS) and Other Metal Layer Gaskets for Transportation Applications

  • ASTM F2326 : Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn

  • ASTM F2326-04 : Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn

  • ASTM F232-68(1979) : Method of Test for Curl Resistance of Carbon Paper (Withdrawn 1984)

  • ASTM F2327 : Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oilon Water

  • ASTM F2327-03 : Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water

  • ASTM F2328 : Test Method for Determining Decarburization and Carburization in Hardened and TemperedThreaded Steel Bolts, Screws and Studs

  • ASTM F2328-04 : Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs

  • ASTM F2328M-04 : Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]

  • ASTM F2329 : Specification for Zinc Coating, Hot Dip, Requirements for Application to Carbon and AlloySteel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

  • ASTM F2330 : Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to HotChlorinated Water

  • ASTM F2330-04 : Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water

  • ASTM F2331-04 : Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials

  • ASTM F2333 : Test Method for Traction Characteristics of the Athletic Shoe Sports Surface Interface

  • ASTM F2333-04 : Test Method for Traction Characteristics of the Athletic Shoe\NSports Surface Interface

  • ASTM F2336 : Guide for Roller Hockey Playing Facilities

  • ASTM F2336-05 : Guide for Roller Hockey Playing Facilities

  • ASTM F2337-03 : Test Method for Treestand Fall Arrest System

  • ASTM F2338 : Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method

  • ASTM F2338-04 : Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method

  • ASTM F2339 : Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light SportAircraft

  • ASTM F2339-04 : Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft

  • ASTM F2341 : Practice for User Requirements for Livestock, Meat, and Poultry Evaluation Devices orSystems

  • ASTM F2341-03 : Practice for User Requirements for Livestock, Meat, and Poultry Evaluation Devices or Systems

  • ASTM F2342 : Specification for Design and Construction of Composition or Quality Constituent MeasuringDevices or Systems

  • ASTM F2342-03 : Specification for Design and Construction of Composition or Quality Constituent Measuring Devices or Systems

  • ASTM F2343 : Test Method for Livestock, Meat, and Poultry Evaluation Devices

  • ASTM F2343-04 : Test Method for Livestock, Meat, and Poultry Evaluation Devices

  • ASTM F2345 : Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic ModularFemoral Heads

  • ASTM F2345-03 : Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads

  • ASTM F2346 : Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs

  • ASTM F2346-05 : Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs

  • ASTM F2347 : Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Usein Biomedical and Tissue Engineered Medical Product Applications

  • ASTM F2347-03 : Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications

  • ASTM F2348 : Performance Specification for Privacy Padlocks

  • ASTM F2348-04 : Performance Specification for Privacy Padlocks

  • ASTM F2349 : Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and OpticalFiber Systems

  • ASTM F2349-04 : Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems

  • ASTM F2350 : Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical FiberSystems

  • ASTM F2350-04 : Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems

  • ASTM F2352 : Specification for Design and Performance of Light Sport Gyroplane Aircraft

  • ASTM F2352-05 : Specification for Design and Performance of Light Sport Gyroplane Aircraft

  • ASTM F2353 : Specification for Manufacturer Quality Assurance Program for Lighter Than Air Light SportAircraft

  • ASTM F2353-05 : Specification for Manufacturer Quality Assurance Program for Lighter-Than-Air Light Sport Aircraft

  • ASTM F2354 : Specification for Continued Airworthiness System for Lighter Than Air Light Sport Aircraft

  • ASTM F2354-05 : Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft

  • ASTM F2355 : Specification for Design and Performance Requirements for Lighter Than Air Light SportAircraft

  • ASTM F2355-05 : Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft

  • ASTM F2356 : Specification for Production Acceptance Testing System for Lighter Than Air Light SportAircraft

  • ASTM F2356-05 : Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft

  • ASTM F2357 : Test Method for Determining the Abrasion Resistance of Inks and Coatings on MembraneSwitches Using the Norman Tool “RCA” Abrader

  • ASTM F2357-04 : Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool |P`RCA|P’ Abrader

  • ASTM F2358 : Guide for Measuring Characteristics of Sapphire Substrates

  • ASTM F2358-04 : Guide for Measuring Characteristics of Sapphire Substrates

  • ASTM F2359 : Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source

  • ASTM F2359-04 : Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source

  • ASTM F2360 : Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse LightSource

  • ASTM F2360-04 : Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source

  • ASTM F2361 : Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors forShipboard Service/Up to and Including Motors of 500 Horsepower

  • ASTM F2361-03 : Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service\MUp to and Including Motors of 500 Horsepower

  • ASTM F2362 : Specification for Temperature Monitoring Equipment

  • ASTM F2362-03 : Specification for Temperature Monitoring Equipment

  • ASTM F2363 : Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex IV MarineSanitation Devices (Flow Through Treatment)

  • ASTM F2363-04 : Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex IV Marine Sanitation Devices (Flow Through Treatment)

  • ASTM F2366 : Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to WindowFiltered Daylight Using a Xenon Arc Light Apparatus

  • ASTM F2366-05 : Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus

  • ASTM F2367 : Specification for Labeling for Upright Brooms for Consumer and Institutional Use

  • ASTM F2367-04A : Specification for Labeling for Upright Brooms for Consumer and Institutional Use

  • ASTM F2368 : Specification for Labeling for Wet Mops for Consumer and Institutional Use

  • ASTM F2368-04 : Specification for Labeling for Wet Mops for Consumer and Institutional Use

  • ASTM F2369 : Safety Specification for Non Integral Firearm Locking Devices

  • ASTM F2369-04 : Safety Specification for Non-Integral Firearm Locking Devices

  • ASTM F2370 : Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin

  • ASTM F2371 : Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using aSweating Heated Manikin

  • ASTM F2372 : Consumer Safety Performance Specification for Shopping Carts

  • ASTM F2372-04 : Consumer Safety Performance Specification for Shopping Carts

  • ASTM F2373 : Consumer Safety Performance Specification for Public Use Play Equipment for Children 6Months through 23 Months

  • ASTM F2374 : Practice for Design, Manufacture, Operation, and Maintenance of Inflatable AmusementDevices

  • ASTM F2374-04 : Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices

  • ASTM F2376 : Practice for Classification, Design, Manufacture, Construction, and Operation of Water SlideSystems

  • ASTM F2378 : Test Method for Sealability of Sheet, Composite, and Solid Form in Place Gasket Materials

  • ASTM F2378-05 : Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials

  • ASTM F2379 : Test Method for Energy Performance of Powered Open Warewashing Sinks

  • ASTM F2379-04 : Test Method for Energy Performance of Powered Open Warewashing Sinks

  • ASTM F2380 : Test Method for Performance of Conveyor Toasters

  • ASTM F2380-04 : Test Method for Performance of Conveyor Toasters

  • ASTM F2381 : Test Method for Evaluating Trans Vinylene Yield in Irradiated Ultra High Molecular WeightPolyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy

  • ASTM F2381-04 : Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy

  • ASTM F2382 : Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)

  • ASTM F2382-04E01 : Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)

  • ASTM F2383 : Guide for Assessment of Adventitious Agents in Tissue Engineered Medical Products(TEMPs)

  • ASTM F2383-05 : Guide for Assessment of Adventitious Agents in Tissue Engineered Medical Products (TEMPs)

  • ASTM F2384 : Specification for Wrought Zirconium 2.5Niobium Alloy for Surgical Implant Applications (UNSR60901)

  • ASTM F2384-05 : Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)

  • ASTM F2385 : Test Method for Determining Femoral Head Penetration into Acetabular Components ofTotal Hip Replacement Using Clinical Radiographs

  • ASTM F2385-04 : Test Method for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs

  • ASTM F2386 : Guide for Preservation of Tissue Engineered Medical Products (TEMPs)

  • ASTM F2386-04 : Guide for Preservation of Tissue Engineered Medical Products (TEMPs)

  • ASTM F238-64(1971) : Recommended Practice for Cathode Melt Prove-In Testing (Withdrawn 1978)

  • ASTM F2387 : Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs

  • ASTM F2387-04 : Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs

  • ASTM F2388 : Consumer Safety Specification for Baby Changing Tables for Domestic Use

  • ASTM F2388-04E01 : Consumer Safety Specification for Baby Changing Tables for Domestic Use

  • ASTM F2389-04 : Specification for Pressure-rated Polypropylene (PP) Piping Systems

  • ASTM F23-90(1995)E01 : Guide for Selecting Methods of Temperature Measurement of Thermionic Emitters (Withdrawn 2001)

  • ASTM F2391 : Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas

  • ASTM F2392 : Test Method for Burst Strength of Surgical Sealants

  • ASTM F2392-04 : Test Method for Burst Strength of Surgical Sealants

  • ASTM F2393 : Specification for High Purity Dense Magnesia Partially Stabilized Zirconia (Mg PSZ) forSurgical Implant Applications

  • ASTM F2393-04 : Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications

  • ASTM F2394 : Guide for Measuring Securement of Balloon Expandable Stent Mounted on Delivery System

  • ASTM F2394-04 : Guide for Measuring Securement of Balloon Expandable Stent Mounted on Delivery System

  • ASTM F2395-05 : Terminology for Unmanned Air Vehicle Systems

  • ASTM F2396-04 : Guide for Construction of High Performance Sand-Based Rootzones for Sports Fields

  • ASTM F2397-04A : Specification for Protective Headgear Used in Martial Arts

  • ASTM F2398-04E01 : Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat

  • ASTM F239-81(1987) : Specification for Nickel Alloy Cathode Sleeves for Electron Devices (Withdrawn 1992)

  • ASTM F24 : Method for Measuring and Counting Particulate Contamination on Surfaces

  • ASTM F2400 : Specification for Helmets Used in Pole Vaulting

  • ASTM F2401 : Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices

  • ASTM F2401-04 : Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices

  • ASTM F2403 : Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength

  • ASTM F2405 : Test Method for Trace Metallic Impurities in High Purity Copper by High Mass ResolutionGlow Discharge Mass Spectrometer

  • ASTM F2405-04 : Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer

  • ASTM F2406 : Practice for Determining Yield of Solid Ink Sticks

  • ASTM F2406-04 : Practice for Determining Yield of Solid Ink Sticks

  • ASTM F2407 : Specification for Surgical Gowns Intended for Use in Healthcare Facilities

  • ASTM F2408 : Specification for Ornamental Fences Employing Galvanized Steel Tubular

  • ASTM F2408-04 : Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets

  • ASTM F2411 : Specification for Design and Performance of an Airborne Sense and Avoid System

  • ASTM F2411-04E01 : Specification for Design and Performance of an Airborne Sense-and-Avoid System

  • ASTM F2412 : Test Methods for Foot Protection

  • ASTM F2412-05 : Test Methods for Foot Protection

  • ASTM F2413 : Specification for Performance Requirements for Foot Protection

  • ASTM F2413-05 : Specification for Performance Requirements for Foot Protection

  • ASTM F2414 : Practice for Sealing Sewer Manholes Using Chemical Grouting

  • ASTM F2414-04 : Practice for Sealing Sewer Manholes Using Chemical Grouting

  • ASTM F2415 : Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft

  • ASTM F2415-05 : Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft

  • ASTM F2416 : Specification for Protective Headgear Used in Electric Personal Assistive Mobility Devices

  • ASTM F2416-04 : Specification for Protective Headgear Used in Electric Personal Assistive Mobility Devices

  • ASTM F2417 : Specification for Fire Safety for Candles

  • ASTM F2417-04 : Specification for Fire Safety for Candles

  • ASTM F2418-04 : Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers

  • ASTM F2419 : Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation ofthe Surface to Receive Resilient Flooring

  • ASTM F2419-05 : Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring

  • ASTM F2420 : Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs UsingRelative Humidity Probe Measurement and Insulated Hood

  • ASTM F2420-05 : Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood

  • ASTM F2421 : Test Method for Measurement of Resilient Floor Plank by Dial Gage

  • ASTM F2421-05 : Test Method for Measurement of Resilient Floor Plank by Dial Gage

  • ASTM F2423 : Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses

  • ASTM F2425 : Specification for Continued Airworthiness System for Weight Shift Control Aircraft

  • ASTM F2425-05 : Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft

  • ASTM F2426 : Guide on Wing Interface Documentation for Powered Parachute Aircraft

  • ASTM F2426-05 : Guide on Wing Interface Documentation for Powered Parachute Aircraft

  • ASTM F2427 : Specification for Required Product Information to be Provided with Lighter Than Air LightSport Aircraft

  • ASTM F2427-05 : Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft

  • ASTM F2428 : Guide for Selection and Use for Pelvic Ring Circumferential Compression StabilizationDevices (PRCCSD)

  • ASTM F2428-04 : Guide for Selection and Use for Pelvic Ring Circumferential Compression Stabilization Devices (PRCCSD)

  • ASTM F2429 : Termninology Relating to Aerospace Transparent Materials and Enclosures

  • ASTM F2429-05 : Terminology Relating to Aerospace Transparent Materials and Enclosures

  • ASTM F2430 : Specification for Bearing, Roller, Needle : Assembly (Thick Outer Race)

  • ASTM F2430-04 : Specification for Bearing, Roller, Needle : Assembly (Thick Outer Race)

  • ASTM F2431 : Specification for Ring Bearing, Inner : For Needle Roller Bearing with Thick Outer Ring

  • ASTM F2431-04 : Specification for Ring Bearing, Inner : For Needle Roller Bearing with Thick Outer Ring

  • ASTM F2432-04 : Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment

  • ASTM F2433 : Test Method for Determining Thermoplastic Pipe Wall Stiffness

  • ASTM F2435 : Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe

  • ASTM F2436 : Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Usinga Drop Test

  • ASTM F2438 : Specification for Oil Spill Response Boom Connection : Slide Connector

  • ASTM F2438-04 : Specification for Oil Spill Response Boom Connection : Slide Connector

  • ASTM F2439 : Specification for Headgear Used in Soccer

  • ASTM F2440-04 : Specification for Indoor Wall/Feature Padding

  • ASTM F2441-05 : Practice for Labeling of Backpacking and Mountaineering Tents and Bivouac Sacks

  • ASTM F2443 : Specification for Roller, Bearing, Needle Ferrous, Solid, Spherical End

  • ASTM F2444 : Practice for Damage Prevention of Bearings, and Bearing Components Through ProperHandling Techniques

  • ASTM F2446 : Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability,

  • ASTM F2446-04 : Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange

  • ASTM F2447 : Practice for Production Acceptance Test Procedures for Weight Shift Control Aircraft

  • ASTM F2447-05 : Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft

  • ASTM F2448 : Practice for Manufacturer Quality Assurance System for Weight Shift Control Aircraft

  • ASTM F2448-04 : Practice for Manufacturer Quality Assurance System for Weight-Shift-Control Aircraft

  • ASTM F2449 : Specification for Manufacturer Quality Assurance Program for Light Sport Gyroplane Aircraft

  • ASTM F2449-05 : Specification for Manufacturer Quality Assurance Program for Light Sport Gyroplane Aircraft

  • ASTM F2450 : Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue EngineeredMedical Products

  • ASTM F2450-04 : Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products

  • ASTM F2451 : Guide forin vivo Assessment of Implantable Devices Intended to Repair or RegenerateArticular Cartilage

  • ASTM F2451-05 : Guide for Assessment of Implantable Devices Intended to Repair or Regenerate Articular Cartilage

  • ASTM F2452 : Practice for Determining the Adhesion of Print Media Utilizing Mechanical Stress : TwoDifferent Test Methods Score/Tape and Cross Hatch

  • ASTM F2452-04 : Practice for Determining the Adhesion of Print Media Utilizing Mechanical Stress : Two Different Test Methods\MScore/Tape and Cross Hatch

  • ASTM F2453/F2453M : Specification for Welded Wire Mesh Fence Fabric (Metallic Coated or Polymer Coated) forMeshes of 6 in.2 [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes

  • ASTM F2454 : Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by theLateral Packer Method, Using Chemical Grouting

  • ASTM F2454-05 : Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting

  • ASTM F2456 : Specification for Youth Resistant Firearms Containers (YRFCs)

  • ASTM F2456-04 : Specification for Youth-Resistant Firearms Containers (YRFCs)

  • ASTM F2457 : Specification for Required Product Information to be Provided with Weight Shift ControlAircraft

  • ASTM F2457-05 : Specification for Required Product Information to be Provided withWeight-Shift-Control Aircraft

  • ASTM F2458 : Test Method for Wound Closure Strength of Tissue Adhesives and Sealants

  • ASTM F2458-05 : Test Method for Wound Closure Strength of Tissue Adhesives and Sealants

  • ASTM F2459 : Test Method for Extracting Residue from Metallic Medical Components and Quantifying viaGravimetric Analysis

  • ASTM F2462 : Practice for Operation and Maintenance of Sewers with Optical Fiber Systems

  • ASTM F2462-05 : Practice for Operation and Maintenance of Sewers with Optical Fiber Systems

  • ASTM F2463 : Terminology for Livestock, Meat, and Poultry Evaluation Systems

  • ASTM F2463-05 : Terminology for Livestock, Meat, and Poultry Evaluation Systems

  • ASTM F2464 : Guide for Cleaning of Various Oiled Shorelines and Habitats

  • ASTM F2464-05 : Guide for Cleaning of Various Oiled Shorelines and Habitats

  • ASTM F2465 : Guide for Oil Spill Dispersant Application Equipment : Single point Spray Systems

  • ASTM F2466 : Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications

  • ASTM F2466-05 : Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications

  • ASTM F2467 : Practice for Measuring Static Sealing Pressure Using Pressure Indicating Film (PIF) inTransportation Applications

  • ASTM F2467-05 : Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications

  • ASTM F2468 : Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications

  • ASTM F2468-05 : Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications

  • ASTM F2469 : Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the DoubleExposure Method

  • ASTM F2469-05 : Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method

  • ASTM F2471 : Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments andPreparation of the Surface to Receive Resilient Flooring

  • ASTM F2471-05 : Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring

  • ASTM F2472 : Test Method for Performance of Staff Serve Hot Deli Cases

  • ASTM F2472-05 : Test Method for Performance of Staff-Serve Hot Deli Cases

  • ASTM F2473-05 : Test Method for Performance of Water-Bath Rethermalizers

  • ASTM F2474 : Test Method for Heat Gain to Space Performance of Commercial KitchenVentilation/Appliance Systems

  • ASTM F2474-05 : Test Method for Heat Gain to Space Performance of Commercial Kitchen Ventilation/Appliance Systems

  • ASTM F2475 : Guide for Biocompatibility Evaluation of Medical Device Packaging Materials

  • ASTM F2476 : Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (Co 2TR) ThroughBarrier Materials Using An Infrared Detecto

  • ASTM F2482 : Specification for Load Indicating Externally Threaded Fasteners

  • ASTM F2483 : Practice for Maintenance and the Development of Maintenance Manuals for Light SportAircraft

  • ASTM F2483-05 : Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft

  • ASTM F2488 : Termninology for Rolling Element Bearings

  • ASTM F2490 : Guide for Aircraft Electrical Load and Power Source Capacity Analysis

  • ASTM F2491 : Guide for Determining Load Ratios for Technical Rescue Systems and Equipment

  • ASTM F2491-05 : Guide for Determining Load Ratios for Technical Rescue Systems and Equipment

  • ASTM F2494 : Test Method for Determining Energy Consumption of Copiers and Similar Office ImagingEquipment

  • ASTM F2495 : Test Method for Determining Energy Consumption of MFDs with Copying Capability andSimilar Office Imaging Equipment

  • ASTM F2496 : Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings

  • ASTM F2497 : Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester

  • ASTM F2498 : Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method

  • ASTM F25 : Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms andOther Dust Controlled Areas

  • ASTM F2501 : Practices for Unmanned Aircraft System Airworthiness

  • ASTM F2502 : Specification and Test Methods for Bioabsorbable Plates and Screws for Internal FixationImplants

  • ASTM F2503 : Practice for Marking Medical Devices and Other Items for Safety in the Magnetic ResonanceEnvironment

  • ASTM F2504 : Practice for Describing System Output of Implantable Middle Ear Hearing Devices

  • ASTM F2505 : Practice for Application of Federal Aviation Administration (FAA) Federal Aviation RegulationsPart 21 Requirements to Unmanned Aircraft Systems (UAS)

  • ASTM F2507 : Specification for Recreational Airpark Design

  • ASTM F2511 : Specification for Rollers, Bearing, Needle, Ferrous, Solid

  • ASTM F2516 : Test Method for Tension Testing of Nickel Titanium Superelastic Materials

  • ASTM F2517 : Specification for Determination of Child Resistance of Portable Fuel Containers for ConsumerUse

  • ASTM F2518 : Guide for Use of a Residential Swimming Pool, Spa, and Hot Tub Safety Audit to PreventUnintentional Drowning

  • ASTM F2519 : Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters andExtractors

  • ASTM F2520 : Specification for Reach in Refrigerators, Freezers, Combination Refrigerator/Freezers, andThaw Cabinets

  • ASTM F2522 : Test Method for Determining the Protective Performance of a Shield Attached on Live LineTools or on Racking Rods for Electric Arc Hazards

  • ASTM F2523 : Practice for Blowout Resistance of Room Temperature Vulcanized Elastomers

  • ASTM F2524 : Practice for Determination of Volatile Content for Formed in Place Gaskets (FIPG) SiliconeAdhesives and Sealants for Transportation Applications

  • ASTM F2527 : Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small DiameterTubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNSR31537)

  • ASTM F2528 : Test Methods for Enteral Feeding Devices with a Retention Balloon

  • ASTM F2531 : Test Method for Load Capacity of Treestand Seats

  • ASTM F2532 : Guide for Determining Net Environmental Benefit of Dispersant Use

  • ASTM F2534 : Guide for Visually Estimating Oil Spill Thickness on Water

  • ASTM F2542 : Test Methods for Physical Assault on Ventilation Grilles for Detention and CorrectionalFacilities

  • ASTM F2547 : Test Method for Determining the Attenuation Properties in a Primary X ray Beam ofMaterials Used to Protect Against Radiation Generated During the Use of X ray Equipment

  • ASTM F254-89(1993)E01 : Test Method for Slip Resistance of Carbon Paper (Withdrawn 1998)

  • ASTM F2550 : Practice for Locating Leaks in Sewer Pipes Using Electro Scan the Variation of ElectricCurrent Flow Through the Pipe Wall

  • ASTM F256 : Specification for Chromium Iron Sealing Alloys with 18 or 28 Percent Chromium

  • ASTM F2561 : An American National Standard Standard Practice for Rehabilitation of a Sewer Service Lateral and Its

  • ASTM F2563 : Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation

  • ASTM F2564 : Specification for Design and Performance of a Light Sport Glider

  • ASTM F2568 : Test Method for Measurement of Sleeping Bags

  • ASTM F2573 : Specification for Low Velocity Resilient Material Projectile

  • ASTM F2574 : Specification for Low Velocity Projectile Marker

  • ASTM F2575 : Guide for Quality Assurance in Translation

  • ASTM F257-55 : Specification for 28 Per Cent Chromium-Iron Alloy for Sealing to Glass (Withdrawn 1973)

  • ASTM F2584 : Practice for Maintenance and Development of Maintenance Manuals for Light UnmannedAircraft System (UAS)

  • ASTM F2599 : Am American National StandardStandard Practice for The Sectional Repair of Damaged Pipe By Meansof AnInverted Cured-In-Place Liner1, 2

  • ASTM F26 : Test Methods for Determining the Orientation of a Semiconductive Single Crystal(Withdrawn 2003) No Replacement

  • ASTM F2618 : An American National Standard Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC)

  • ASTM F2634 : An American National Standard Test Method for Laboratory Testing of Polyethylene (PE)

  • ASTM F2678 : Practice for Preparing Panel Underlayments, Thick Poured GypsumConcrete Underlayments,

  • ASTM F2-68(1983) : Specification for Aluminum-Clad Steel Strip and Nickel-Steel-Aluminum Composite Strip for Electron Tubes (Withdrawn 1992)

  • ASTM F268-56 : Specification for Round Chromium-Copper Wire for Electronic Devices (Withdrawn 1959)

  • ASTM F26-87a(1999) : Test Methods for Determining the Orientation of a Semiconductive Single Crystal (Withdrawn 2003)

  • ASTM F269 : Test Method for Sag of Tungsten Wire

  • ASTM F2695 : Specification for Ultra-High Molecular Weight Polyethylene Powder BlendedWith Alpha-

  • ASTM F270-56(1968) : Recommended Practice for Testing Relative Thermionic Emissive Properties of Electron Tube Materials Using a Reference Cylindrical Diode (Withdrawn 1972)

  • ASTM F2707 : Safety Performance Specification forSafe Design and Installation of Field Fabricated Suction-

  • ASTM F2769 : An American National Standard Standard Specification for Polyethylene of Raised Temperature (PERT)

  • ASTM F2778 : Test Method for Measurement of Percent Crystallinity ofPolyetheretherketone (PEEK)

  • ASTM F27-83(1988) : Practice for Preparing a Test Ingot of Germanium by Hydrogen Reduction of Germanium Dioxide (Withdrawn 1995)

  • ASTM F278-66 : Method of Test for Sublimination Characteristics of Metallic Materials in Cathode Sleeve Form by Electrical Resistance (Withdrawn 1972)

  • ASTM F2792 : Terminology forAdditive Manufacturing Technologies1,2

  • ASTM F28 : Test Methods for Minority Carrier Lifetime in Bulk Germanium and Silicon by Measurementof Photoconductivity Decay (Withdrawn 2003) No Replacement

  • ASTM F28-02 : Test Methods for Minority-Carrier Lifetime in Bulk Germanium and Silicon by Measurement of Photoconductivity Decay (Withdrawn 2003)

  • ASTM F2854 : An American National Standard Standard Specification for Push-Fit Crosslinked Polyethylene (PEX)

  • ASTM F288 : Specification for Tungsten Wire for Electron Devices and Lamps

  • ASTM F2883 : Guide for Characterization of Ceramic and Mineral Based Scaffoldsused for Tissue-

  • ASTM F289 : Specification for Molybdenum Wire and Rod for Electronic Applications

  • ASTM F29 : Specification for Dumet Wire for Glass to Metal Seal Applications

  • ASTM F290 : Specification for Round Wire for Winding Electron Tube Grid Laterals

  • ASTM F3 : Specification for Nickel Strip for Electron Tubes

  • ASTM F30 : Specification for Iron Nickel Sealing Alloys

  • ASTM F300-64(1987) : Methods of Measuring Interface Impedance Characteristics of Electron Tube Cathodes (Withdrawn 1992)

  • ASTM F301-91 : Practice for Open Bottle Tap Sampling of Liquid Streams (Withdrawn 2000)

  • ASTM F302 : Practice for Field Sampling of Aerospace Fluids in Containers

  • ASTM F303 : Practices for Sampling for Particles in Aerospace Fluids and Components

  • ASTM F304-70(1980) : Method of Sampling for Particulates from Aerospace Components with Convolutes (Withdrawn 1988)

  • ASTM F305-70(1980) : Method of Sampling Particulates from Reservoir-Type Pressure-Sensing Instruments by Fluid Flushing (Withdrawn 1988)

  • ASTM F306-70(1999) : Practice for Sampling Particulates from Man-Accessible Storage Vessels for Aerospace Fluids by Vacuum Entrainment Technique (General Method) (Withdrawn 2000)

  • ASTM F307 : Practice for Sampling Pressurized Gas for Gas Analysis

  • ASTM F308-73(1980) : Method of Sampling Gas Blow-Down Systems and Components for Particulate Contamination by Manual Method (Withdrawn 1988)

  • ASTM F309 : Practice for Liquid Sampling of Noncryogenic Aerospace Propellants

  • ASTM F31 : Specification for 42% Nickel 6% Chromium Iron Sealing Alloy

  • ASTM F310 : Practice for Sampling Cryogenic Aerospace Fluids

  • ASTM F311 : Practice for Processing Aerospace Liquid Samples for Particulate Contamination AnalysisUsing Membrane Filters

  • ASTM F312 : Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids onMembrane Filters

  • ASTM F313-78(1983) : Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis (Withdrawn 1990)

  • ASTM F314-70(1980) : Methods of Test for Identification of Metallic and Fibrous Contaminants in Aerospace Fluids (Withdrawn 1991)

  • ASTM F315-70(1996) : Test Method of Identification of Solder and Solder Flux Contaminants in Aerospace Fluids (Withdrawn 1998)

  • ASTM F316 : Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and MeanFlow Pore Test

  • ASTM F317-72(1982) : Test Method for Liquid Flow Rate of Membrane Filters (Withdrawn 1995)

  • ASTM F318 : Practice for Sampling Airborne Particulate Contamination in Cleanrooms for HandlingAerospace Fluids

  • ASTM F319 : Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements

  • ASTM F320 : Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures

  • ASTM F321-72 : Automatic Particle Counter Size Setting Method (Withdrawn 1983)

  • ASTM F322-80 : Method for Determining the Quality of Calibration Particles for Automatic Particle Counters (Withdrawn 1992)

  • ASTM F323-78(1983) : Practice for Precision Classification of Particles (Withdrawn 1989)

  • ASTM F324-75(1980) : Test Method for Nonvolatile Residue of Volatile Cleaning Solvents Using the Solvent Purity Meter (Withdrawn 1987)

  • ASTM F326 : Test Method for Electronic Measurement for Hydrogen Embrittlement from CadmiumElectroplating Processes

  • ASTM F32-68 : Recommended Practice for Sumuth-Adhesion Testing of Cathode Coatings (Withdrawn 1973)

  • ASTM F327 : Practice for Sampling Gas Blow Down Systems and Components for ParticulateContamination by Automatic Particle Monitor Method

  • ASTM F328 : Practice for Calibration of an Airborne Particle Counter Using Monodisperse SphericalParticles

  • ASTM F329-78(1983) : Practice for Sampling and Measurement of Particulate Contamination in Liquids Using an In-Line Automatic Monitor (Withdrawn 1993)

  • ASTM F33- : Recommended Practice for Determination of Gas Content of Strip Materials (Withdrawn 1971)

  • ASTM F330 : Test Method for Bird Impact Testing of Aerospace Transparent Enclosures

  • ASTM F331 : Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (UsingFlash Evaporator)

  • ASTM F332-75(1980) : Method of Test for Amount of Nonvolatile Residue (NVR) in Trichlorotrifluouroethane (Meseran Procedure) (Withdrawn 1982)

  • ASTM F333-75(1980) : Method of Test for Amount of Lubricant on the Surface of Aluminum Foils (Meseran Procedure) (Withdrawn 1982)

  • ASTM F334-88 : Method for Measuring Lithium-Ion Drift Mobility in Germanium Single Crystals (Withdrawn 1990)

  • ASTM F335 : Terminology Relating to Electrostatic Copying

  • ASTM F336 : Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service

  • ASTM F337-71(1979) : Recommended Practice for Dimensions and Tolerances for Bone Plates (Withdrawn 1982)

  • ASTM F338-77 : Specification for Tipial Type Bone Plate (Withdrawn 1982)

  • ASTM F339-71(1993) : Specification for Cloverleaf Intramedullary Pins (Withdrawn 1998)

  • ASTM F34 : Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials

  • ASTM F340-71(1993)e1 : Specification for Pilot-Type Medical Countersinks (Withdrawn 1997)

  • ASTM F341-71 : Specification for Slotted Bone Plates (Withdrawn 1982)

  • ASTM F342-71(1987) : Specification for Counterlocking Screws (Thornton Type) (Withdrawn 1993)

  • ASTM F343-71(1987) : Specification for Counterlocking Screws (McLaughlin Type) (Withdrawn 1993)

  • ASTM F344-71(1987) : Specification for Counterbored Hex-Head Bolts (Thornton Type) Made From Stainless Steel (Withdrawn 1993)

  • ASTM F345-71(1987) : Specification for Counterbored Hex-Head Bolts (McLaughlin Type) Made From Stainless Steel (Withdrawn 1993)

  • ASTM F346-71(1987) : Specification for Cannulated Hex-Head Bolts (Thornton Type) Made From Cobalt-Chromium Alloy (Withdrawn 1993)

  • ASTM F347-71(1987) : Specification for Cannulated Hex-Head Bolts (McLaughlin Type) Made From Cobalt-Chromium Alloy (Withdrawn 1993)

  • ASTM F348-41(1987) : Specification for Hex-Head Bolts (Thornton Type) Made From Cobalt-Chromium Alloy (Withdrawn 1993)

  • ASTM F349-71(1987) : Specification for Hex-Head Bolts (McLaughlin Type) Made From Cobalt-Chromium Alloy (Withdrawn 1993)

  • ASTM F350-71(1987) : Specification for Hex-Head Bolts (Thornton Type) and Lock Washers Made From Stainless Steel (Withdrawn 1993)

  • ASTM F351-71(1987) : Specification for Hex-Head Bolts (McLaughlin Type) and Lock Washers Made From Stainless Steel (Withdrawn 1993)

  • ASTM F352-71(1987) : Specification for Lock Washers Made From Stainless Steel (Withdrawn 1993)

  • ASTM F353-71(1977) : Specification for Tri-Fin Nails Made From Cobalt-Chromium Alloy (Withdrawn 1991)

  • ASTM F354-71(1977) : Specification for Tri-Fin Nails Made From Stainless Steel (Withdrawn 1991)

  • ASTM F356-75(1996) : Specification for Beryllia Ceramics for Electronic and Electrical Applications (Withdrawn 2001)

  • ASTM F35-68(1988) : Practice for Identification of Minute Crystalline Particle Contaminants by X-Ray Diffraction (Withdrawn 1994)

  • ASTM F357 : Practice for Determining Solderability of Thick Film Conductors

  • ASTM F358 : Test Method for Wavelength of Peak Photoluminescence and the CorrespondingComposition of Gallium Arsenide Phosphide Wafers

  • ASTM F359 : Practice for Static Immersion Testing of Unstressed Materials in Nitrogen Tetroxide (N 2) (Withdrawn 2003) No Replacement

  • ASTM F359-82(1994)e1 : Practice for Static Immersion Testing of Unstressed Materials in Nitrogen Tetroxide (N 2) (Withdrawn 2003)

  • ASTM F36 : Test Method for Compressibility and Recovery of Gasket Materials

  • ASTM F360 : Practice for Image Evaluation of Electrostatic Business Copies

  • ASTM F361-80 : Practice for Assessment of Compatibility of Metallic Materials for Surgical Implants With Respect to Effect of Materials on Tissue (Withdrawn 1987)

  • ASTM F362 : Test Method for Determining the Erasability of Inked Ribbons

  • ASTM F363 : Test Method for Corrosion Testing of Gaskets

  • ASTM F364 : Specification for Molybdenum Flattened Wire for Electron Tubes

  • ASTM F365-73 : Recommended Practice for Electrostatic Charge Mobility on Flexible Barrier Materials (Withdrawn 1977)

  • ASTM F366 : Specification for Fixation Pins and Wires

  • ASTM F367-81(1991) : Specification for Holes and Slots for Inch Cortical Bone Screws (Withdrawn 1997)

  • ASTM F367M-82(1991) : Specification for Holes and Slots With Spherical Contour for Metric Cortical Bone Screws (Metric) (Withdrawn 1997)

  • ASTM F368-73 : Specification for Fixation Pins-Knowles and Hagie Types (Withdrawn 1982)

  • ASTM F369-73 : Specification for Hip Nail-Jewett Type (Withdrawn 1982)

  • ASTM F37 : Test Methods for Sealability of Gasket Materials

  • ASTM F370 : Specification for Proximal Femoral Endoprosthesis (Withdrawn 2005) No Replacement 0 ASTM 0

  • ASTM F370-94(1999) : Specification for Proximal Femoral Endoprosthesis (Withdrawn 2005)

  • ASTM F371 : Test Method for Compatibility of Materials with Liquid Oxygen (Reaction Intensity Method) (Withdrawn 2003) No Replacement

  • ASTM F371-83(1994)e1 : Test Method for Compatibility of Materials with Liquid Oxygen (Reaction Intensity Method) (Withdrawn 2003)

  • ASTM F372 : Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using anInfrared Detection Technique

  • ASTM F373 : Test Method for Embossed Depth of Resilient Floor Coverings

  • ASTM F374 : Test Method for Sheet Resistance of Silicon Epitaxial, Diffused, Polysilicon, and Ionimplanted Layers Using an In Line Four Point Probe with the Single Configuration Procedure(Withdrawn 2003) No Replacement

  • ASTM F374-02 : Test Method for Sheet Resistance of Silicon Epitaxial, Diffused, Polysilicon, and Ion-implanted Layers Using an In-Line Four-Point Probe with the Single-Configuration Procedure (Withdrawn 2003)

  • ASTM F375 : Specification for Integrated Circuit Lead Frame Material

  • ASTM F376/F376M-89 : Test Method for Tires for Wet Traction Performance in Cornering (Withdrawn 1994)

  • ASTM F377 : Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires

  • ASTM F378- : Method of Test for Electrical Ignition Characteristics of Gas-Filled Flash Lamps (Withdrawn 1978)

  • ASTM F379-76(1987) : Recommended Practice for Measuring Slope Efficiency and Lasing Threshold of Ruby Laser Rods (Withdrawn 1994)

  • ASTM F38 : Test Methods for Creep Relaxation of a Gasket Material

  • ASTM F380-77(1989) : Test Method for Effective Fluorescent Lifetime of Neodymium-Doped Laser Materials (Withdrawn 1994)

  • ASTM F382 : Specification and Test Method for Metallic Bone Plates

  • ASTM F384 : Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices

  • ASTM F386 : Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces

  • ASTM F387 : Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer

  • ASTM F388-84 : Method for Measurement of Oxide Thickness on Silicon Wafers and Metallization Thickness by Multiple-Beam Interference (Tolansky Method) (Withdrawn 1993)

  • ASTM F390 : Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four Probe Array

  • ASTM F391 : Test Methods for Minority Carrier Diffusion Length in Extrinsic Semiconductors byMeasurement of Steady State Surface Photovoltage (Withdrawn 2003) No Replacement

  • ASTM F391-02 : Test Methods for Minority Carrier Diffusion Length in Extrinsic Semiconductors by Measurement of Steady-State Surface Photovoltage (Withdrawn 2003)

  • ASTM F392 : Test Method for Flex Durability of Flexible Barrier Materials

  • ASTM F394-78(1996) : Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)

  • ASTM F39-59 : Methods of Testing Compressed Asbestos Sheet Packing (Withdrawn 1978)

  • ASTM F396 : Practice for Comparing One Time Noncorrectable Typewriter Ribbons

  • ASTM F397 : Test Method for Resistivity of Silicon Bars Using a Two Point Probe (Withdrawn 2003) NoReplacement

  • ASTM F397-02 : Test Method for Resistivity of Silicon Bars Using a Two-Point Probe (Withdrawn 2003)

  • ASTM F398 : Test Method for Majority Carrier Concentration in Semiconductors by Measurement ofWavenumber or Wavelength of the Plasma Resonance Minimum (Withdrawn 2003) No Replacement

  • ASTM F398-92(2002) : Test Method for Majority Carrier Concentration in Semiconductors by Measurement of Wavenumber or Wavelength of the Plasma Resonance Minimum (Withdrawn 2003)

  • ASTM F399-00a : Test Method for Thickness of Heteroepitaxial or Polysilicon Layers (Withdrawn 2002)

  • ASTM F4 : Specification for Carbonized Nickel Strip and Carbonized Nickel Plated and Nickel Clad SteelStrip for Electron Tubes

  • ASTM F401-74 : Method of Test for Yield and Maintenance Factors for Gaskets (Withdrawn 1978)

  • ASTM F402 : Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for JoiningThermoplastic Pipe and Fittings

  • ASTM F403 : Test Method for Tires for Wet Traction in Straight Ahead Braking, Using Highway Vehicles

  • ASTM F404 : Consumer Safety Specification for High Chairs

  • ASTM F405 : Specification for Corrugated Polyethylene (PE) Pipe and Fittings

  • ASTM F406 : Consumer Safety Specification for Non Full Size Baby Cribs/Play Yards

  • ASTM F408 : Test Method for Tires for Wet Traction in Straight Ahead Braking, Using a Towed Trailer

  • ASTM F40-83 : Method for Preparing Monocrystalline Test Ingots of Silicon by the Vertical-Pulling (Czochralski) Technique (Withdrawn 1989)

  • ASTM F409 : Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

  • ASTM F410 : Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement

  • ASTM F411-81 : Method for Service-Free Life Evaluation of Air Handling System of Household Canister, Stick, Hand-Held, and Utility Vacuum Cleaners (Withdrawn 1988)

  • ASTM F412 : Terminology Relating to Plastic Piping Systems

  • ASTM F413-98 : Practice for Preparation of an Offset Duplicator for Use in Functional Testing of Lithographic Copy Products (Withdrawn 2002)

  • ASTM F414 : Test Method for Energy Absorbed by a Tire When Deformed by a Slow Moving Plunger

  • ASTM F415 : Test Method for Curl in Carbon Paper

  • ASTM F416-94 : Test Method for Detection of Oxidation Induced Defects in Polished Silicon Wafers (Withdrawn 1998)

  • ASTM F417-78(1996) : Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)

  • ASTM F418 : Practice for Preparation of Samples of the Constant Composition Region of Epitaxial GalliumArsenide Phosphide for Hall Effect Measurements

  • ASTM F41-90 : Practice for Preparing Silicon Single Crystals by the Floating-Zone Technique for Evaluation of Polysilicon Ingot (Withdrawn 1996)

  • ASTM F419-94 : Test Method for Determining Carrier Density in Silicon Epitaxial Layers by Capacitance-Voltage Measurements on Fabricated Junction or Schottky Diodes (Withdrawn 2001)

  • ASTM F42 : Test Methods for Conductivity Type of Extrinsic Semiconducting Materials (Withdrawn 2003) No Replacement

  • ASTM F420 : Test Method for Access Depth Under Furniture of Vacuum Cleaners

  • ASTM F42-02 : Test Methods for Conductivity Type of Extrinsic Semiconducting Materials (Withdrawn 2003)

  • ASTM F421 : Test Method for Measuring Groove and Void Depth in Passenger Car Tires

  • ASTM F423-95 : Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002)

  • ASTM F424 : Test Method for Tires for Wet Driving Traction in Straight Ahead Motion Using HighwayVehicles

  • ASTM F425 : Terminology Relating to Lithographic Copy Products (Withdrawn 2003) No Replacement 0 ASTM 0

  • ASTM F425-93(1997) : Terminology Relating to Lithographic Copy Products (Withdrawn 2003)

  • ASTM F426-81(1990) : Practice for Evaluating and Classifying Methods for the Analysis of Fat in Meat and Meat Products (Withdrawn 1995)

  • ASTM F427-77(1990) : Recommended Practice for Sampling Meat to Determine Percent Composition in a Lot (Withdrawn 1995)

  • ASTM F428 : Test Method for Intensity of Scratches on Aerospace Glass Enclosures

  • ASTM F43 : Test Methods for Resistivity of Semiconductor Materials (Withdrawn 2003) No Replacement 0 ASTM 0

  • ASTM F431 : Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners

  • ASTM F432 : Specification for Roof and Rock Bolts and Accessories

  • ASTM F433 : Practice for Evaluating Thermal Conductivity of Gasket Materials

  • ASTM F434 : Test Method for Blow Out Testing of Preformed Gaskets

  • ASTM F435-86 : Method of Test for Peak Wet Traction of Tires in Cornering With Driving Torque Application, Using Highway Vehicles (Withdrawn 1988)

  • ASTM F436 : Specification for Hardened Steel Washers

  • ASTM F437 : An American National Standard Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride)

  • ASTM F439 : Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

  • ASTM F43-99 : Test Methods for Resistivity of Semiconductor Materials (Withdrawn 2003)

  • ASTM F44 : Specification for Metallized Surfaces on Ceramic

  • ASTM F441/F441M : Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

  • ASTM F442/F442M : Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR PR)

  • ASTM F443-77 : Specification for Bell-End Chlorinated Poly(Vinyl Chloride) (CPVC) Pipe Schedule 40 (Withdrawn 1987)

  • ASTM F444 : Consumer Safety Specification for Scald Preventing Devices and Systems in Bathing Areas

  • ASTM F445 : Consumer Safety Specification for Thermal Shock Preventing Devices and Systems in Showering Areas

  • ASTM F446 : Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area

  • ASTM F447-76 : Specification for V-Style Blade Plate (Withdrawn 1982)

  • ASTM F448M-94 : Test Method for Measuring Steady-State Primary Photocurrent [Metric] (Withdrawn 1999)

  • ASTM F449 : Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainageor Water Table Control

  • ASTM F45- : Method of Test for Oxygen Content of Silicon (Withdrawn 1971)

  • ASTM F450 : Test Methods for Vacuum Cleaner Hose/Durability and Reliability (Plastic Wire Reinforced)

  • ASTM F451 : Specification for Acrylic Bone Cement

  • ASTM F452 : Specification for Preformed Cranioplasty Plates

  • ASTM F453-76(1986) : Specification for Hooked Intramedullary Pins (Withdrawn 1994)

  • ASTM F454-76(1986) : Specification for Intramedullary Pins (Withdrawn 1994)

  • ASTM F455-78(1986) : Specification for Solid Cross-Section Intramedullary Nails (Withdrawn 1994)

  • ASTM F456-76(1980) : Test Method for Pinhole Flex Life of Films by Axial Vibration of a Tubular Sample (Withdrawn 1987)

  • ASTM F457 : Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analogor Digital Instrumentation

  • ASTM F458 : Practice for Nondestructive Pull Testing of Wire Bonds

  • ASTM F459 : Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds

  • ASTM F460-79 : Method for Laboratory Test for Relative Cornering and Aligning Stiffnesses of Passenger Car Tires (Withdrawn 1985)

  • ASTM F463-76(1990) : Test Method for Fat in Meat and Meat Products by Ether Extraction (Withdrawn 1995)

  • ASTM F464-76(1990) : Test Methods for Fat in Meat and Meat Products by the Foss-Let Fat Analyzer Techniques (Withdrawn 1995)

  • ASTM F465-76(1981) : Recommended Practice for Developing Precision and Accuracy Data on Method for the Analysis of Meat and Meat Products (Withdrawn 1993)

  • ASTM F466-79(1992) : Test Method for Small-Signal Scattering Parameters of Low-Power Transistors in the 0.2 to 2.0 GHZ Frequency Range (Withdrawn 1997)

  • ASTM F467 : Specification for Nonferrous Nuts for General Use

  • ASTM F467M : Specification for Nonferrous Nuts for General Use [Metric]

  • ASTM F468 : Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use

  • ASTM F46-88 : Practice for Room Temperature Resistivity Measurements on Thermoelectric Materials (Withdrawn 1993)

  • ASTM F468M : Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]

  • ASTM F469-78 : Practice for Assessment of Compatibility of Nonporous Polymeric Materials for Surgical Implants with Regard to Effect of Materials on Tissue (Withdrawn 1987)

  • ASTM F470 : Practice for Caking Temperature of Dry Electrostatic Toner

  • ASTM F471 : Terminology Relating to Combination Locks

  • ASTM F472 : Terminology for Geometry of Alpine Skis

  • ASTM F473 : Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings

  • ASTM F474 : Specification for Static Screw Retention Strength of Binding Mounting Area on Alpine Skis(Withdrawn 2004) No Replacement

  • ASTM F474-98 : Specification for Static Screw-Retention Strength of Binding Mounting Area on Alpine Skis (Withdrawn 2004)

  • ASTM F475 : Specification for Test Screw Used in Screw Retention Test of Binding Mounting Area onAlpine Skis (Withdrawn 2004) No Replacement

  • ASTM F475-77(1998) : Specification for Test Screw Used in Screw-Retention Test of Binding Mounting Area on Alpine Skis (Withdrawn 2004)

  • ASTM F476 : Test Methods for Security of Swinging Door Assemblies

  • ASTM F478 : Specification for In Service Care of Insulating Line Hose and Covers

  • ASTM F479 : Specification for In Service Care of Insulating Blankets

  • ASTM F47-94 : Test Method for Crystalographic Perfection of Silicon by Preferential Etch Techniques (Withdrawn 1998)

  • ASTM F481 : Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank LeachFields

  • ASTM F484 : Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi LiquidCompounds

  • ASTM F486 : Practice for Preparation of Use and Care Booklets for Vacuum Cleaners

  • ASTM F48-68(1978) : Recommended Practices for Dimensioning Mica Bridges (Withdrawn 1984)

  • ASTM F487 : Specification for Fine Aluminum 1% Silicon Wire for Semiconductor Lead Bonding

  • ASTM F488 : Test Method for On site Screening of Heterotrophic Bacteria in Water (Withdrawn 2004) NoReplacement

  • ASTM F488-95 : Test Method for On-site Screening of Heterotrophic Bacteria in Water (Withdrawn 2004)

  • ASTM F489 : Test Method for Using a James Machine (Withdrawn 2005) No Replacement 0 ASTM 0

  • ASTM F489-96e1 : Test Method for Using a James Machine (Withdrawn 2004)

  • ASTM F490-77 : Method for Microscopical Sizing and Counting Particles on Membrane Filters Using Image Shear (Withdrawn 1992)

  • ASTM F491-95 : Specification for Poly(Vinylidene Fluoride) (PVDF) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002)

  • ASTM F492 : Specification for Propylene and Polypropylene (PP) Plastic Lined Ferrous Metal Pipe andFittings (Withdrawn 2004) No Replacement

  • ASTM F492-95 : Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)

  • ASTM F494 : Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners

  • ASTM F495 : Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures

  • ASTM F496 : Specification for In Service Care of Insulating Gloves and Sleeves

  • ASTM F49-68(1972) : Specification for Molybdenum Strip for Electron Tubes (Withdrawn 1978)

  • ASTM F497 : Practice for Use of the Electric and Electronic Typewriter as a Test Instrument

  • ASTM F498 : Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis

  • ASTM F499-84 : Recommended Practice for Installation of Wood Underlayment and Preparation of the Surface to Receive Resilient Flooring (Withdrawn 1992)

  • ASTM F50 : Practice for Continuous Sizing and Counting of Airborne Particles in Dust Controlled Areasand Clean Rooms Using Instruments Capable of Detecting Single Sub Micrometre and Larger Particles

  • ASTM F500-77 : Specification for Self-Curing Acrylic Resins Used in Neurosurgery (Withdrawn 1993)

  • ASTM F501-93 : Test Method for Aerospace Materials Response to Flame, with Vertical Test Specimen (For Aerospace Vehicles Standard Conditions) (Withdrawn 1998)

  • ASTM F502 : Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted AircraftSurfaces

  • ASTM F503-77 : Practice for Preparing Aircraft Cleaning Compounds (Withdrawn 1988)

  • ASTM F504 : Test Method for Measuring the Quasi Static Release Moments of Alpine Ski Bindings

  • ASTM F505 : Practice for the Comparative Evaluation of the Imaging Properties of Liquid ElectrostaticToners

  • ASTM F506-77(1998) : Practice for Assessing the Quality of Direct-Image Paper Offset Masters (Withdrawn 2002)

  • ASTM F507-77(1989) : Practice for Mounting Wedged Beamsplitters to Maintain a Laser Beam Parallel to a Reference Surface (Withdrawn 1994)

  • ASTM F508 : Practice for Specifying Thick Film Pastes

  • ASTM F509 : Practice for Testing One Time Carbonizing Tissue for Pinholes

  • ASTM F51 : Test Method for Sizing and Counting Particulate Contaminant In and On Clean RoomGarments

  • ASTM F510 : Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with aGrit Feed Method

  • ASTM F511 : Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile

  • ASTM F512 : Specification for Smooth Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings forUnderground Installation

  • ASTM F513 : Safety Specification for Eye and Face Protective Equipment for Hockey Players

  • ASTM F515-81 : Specification for Polished Monocrystalline Silicon Slices (Withdrawn 1984)

  • ASTM F516-77(1983) : Method for Laboratory Test for Force and Moment Properties of Passenger Car Tires (Withdrawn 1988)

  • ASTM F517-77(1989) : Practice for Aligning a Visible Beam From a Continuous-Wave Laser at a Desired Distance From a Reference Surface (Withdrawn 1994)

  • ASTM F518-77(1991)E01 : Practice for Determining Effective Adhesion of Photoresist to Hard-Surface Photomask Banks and Semiconductor Wafers During Etching (Withdrawn 1996)

  • ASTM F519 : Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating Processes andService Environments

  • ASTM F520 : Test Method for Environmental Resistance of Aerospace Transparencies

  • ASTM F521 : Test Methods for Bond Integrity of Transparent Laminates

  • ASTM F522-94 : Test Method for Stacking Fault Density of Epitaxial Layers of Silicon by Interference-Contrast Microscopy (Withdrawn 1998)

  • ASTM F523 : Practice for Unaided Visual Inspection of Polished Silicon Wafer Surfaces (Withdrawn 2003) No Replacement

  • ASTM F523-02 : Practice for Unaided Visual Inspection of Polished Silicon Wafer Surfaces (Withdrawn 2003)

  • ASTM F524-77(1992) : Test Methods for Measuring Beam Divergence of Pulsed Lasers by the Apertured-Detector Technique (Withdrawn 2001)

  • ASTM F525 : Test Method for Measuring Resistivity of Silicon Wafers Using a Spreading Resistance Probe(Withdrawn 2003) No Replacement

  • ASTM F525-00a : Test Method for Measuring Resistivity of Silicon Wafers Using a Spreading Resistance Probe (Withdrawn 2003)

  • ASTM F526 : Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests

  • ASTM F52-69(1973) : Method of Test for Silting Index of Fluids for Processing Electron and Microelectronic Devices (Withdrawn 1979)

  • ASTM F527-80(1991)E01 : Practice for Adjusting Photoresist Exposure Time (Withdrawn 1996)

  • ASTM F528 : Test Method of Measurement of Common Emitter D C Current Gain of Junction Transistors

  • ASTM F529-80(1987) : Method for Interpretation of Interferograms of Nominally Plane Wavefronts (Withdrawn 1994)

  • ASTM F530-81(1987) : Test Method for Wavefront Distortion of Laser Rods (Withdrawn 1994)

  • ASTM F531-81(1987) : Test Method for Wavefront Distortion and Face Parallelism of Laser Disks (Withdrawn 1994)

  • ASTM F532-81(1987) : Test Methods for Measuring Width of Defects in Optical Surfaces, Using Nomarski Differential Microscopy (Withdrawn 1994)

  • ASTM F533 : Test Method for Thickness and Thickness Variation of Silicon Wafers (Withdrawn 2003) NoReplacement

  • ASTM F533-02a : Test Method for Thickness and Thickness Variation of Silicon Wafers (Withdrawn 2003)

  • ASTM F534 : Test Method for Bow of Silicon Wafers (Withdrawn 2003) No Replacement 0 ASTM 0

  • ASTM F534-02a : Test Method for Bow of Silicon Wafers (Withdrawn 2003)

  • ASTM F535-79 : Specification for Electrical Performance Characteristics of Vacuum Cleaners (Withdrawn 1985)

  • ASTM F536 : Test Method for Size of Resilient Floor Tile by Dial Gage Method (Withdrawn 2004) NoReplacement

  • ASTM F53-68(1978) : Recommended Practice for Measurement of Sublimation From Thermionic Emitters (Withdrawn 1984)

  • ASTM F536-98 : Test Method for Size of Resilient Floor Tile by Dial Gage Method (Withdrawn 2004)

  • ASTM F537 : Specification for Design, Fabrication, and Installation of Fences Constructed of Wood andRelated Materials

  • ASTM F538 : Terminology Relating to the Characteristics and Performance of Tires

  • ASTM F539 : Practice for Fitting Athletic Footwear

  • ASTM F540 : Test Method for Squareness of Resilient Floor Tile by Dial Gage Method (Withdrawn 2004) No Replacement

  • ASTM F540-98 : Test Method for Squareness of Resilient Floor Tile by Dial Gage Method (Withdrawn 2004)

  • ASTM F541 : Specification for Alloy Steel Eyebolts

  • ASTM F543 : Specification and Test Methods for Metallic Medical Bone Screws

  • ASTM F544-92 : Reference Chart for Pictorial Cortical Bone Screw Classification (Withdrawn 1998)

  • ASTM F545-95 : Specification for PVC and ABS Injected Solvent Cemented Plastic Pipe Joints (Withdrawn 2001)

  • ASTM F546-95 : Specification for Perfluoro (Ethylene-Propylene) Copolymer (FEP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002)

  • ASTM F547 : Terminology of Nails for Use with Wood and Wood Base Materials

  • ASTM F54-74 : Recommended Practice for Determining Multiple Photomask Registration (Withdrawn 1981)

  • ASTM F548 : Test Method for Intensity of Scratches on Aerospace Transparent Plastics

  • ASTM F549 : Terminology Relating to Carbonless Copy Products

  • ASTM F550-77(1998) : Test Method for Lithographic Properties of Imaging Materials (Withdrawn 2002)

  • ASTM F551 : Practice for Using a 67.23 in. (1.707 m) Diameter Laboratory Test Roadwheel in TestingTires

  • ASTM F552 : Terminology Relating to Chain Link Fencing

  • ASTM F553-92 : Test Method for Carbon Paper and Carbon Film Durability (Withdrawn 1998)

  • ASTM F554-78 : Test Method for Wet Cornering Traction of Tires Using Over-The-Road Tire Tester (Withdrawn 1988)

  • ASTM F555 : Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner

  • ASTM F556 : Test Method for Curl of Carbonless Copy Papers

  • ASTM F557-79 : Test Method for Relative Work for Straight-Line Movement of Cleaners While Cleaning Carpets (Withdrawn 1986)

  • ASTM F558 : Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners

  • ASTM F55-82 : Specification for Stainless Steel Bar and Wire for Surgical Implants (Withdrawn 1991)

  • ASTM F559 : Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel

  • ASTM F5-60(1987) : Test Method for Volatile Content of Germanium Dioxide (Withdrawn 1994)

  • ASTM F561 : Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

  • ASTM F562 : Specification for Wrought 35Cobalt 35Nickel 20Chromium 10Molybdenum Alloy for SurgicalImplant Applications (UNS R30035)

  • ASTM F563 : Specification for Wrought Cobalt 20Nickel 20Chromium 3.5Molybdenum 3.5Tungsten 5IronAlloy for Surgical Implant Applications (UNS R30563) (Withdrawn 2005) No Replacement

  • ASTM F563-00 : Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications (UNS R30563) (Withdrawn 2005)

  • ASTM F564 : Specification and Test Methods for Metallic Bone Staples

  • ASTM F565 : Practice for Care and Handling of Orthopedic Implants and Instruments

  • ASTM F567 : Practice for Installation of Chain Link Fence

  • ASTM F56-82 : Specification for Stainless Steel Sheet and Strip for Surgical Implants (Withdrawn 1991)

  • ASTM F568M : Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners

  • ASTM F569-78(1982) : Classification for Filterability Index of Reagent-Grade Water and High-Purity Waters for Microelectronic Device Processing (Withdrawn 1989)

  • ASTM F570-90 : Test Method for Transistor Collector-Emitter Saturation Voltage (Withdrawn 1995)

  • ASTM F571 : Practice for Installation of Exit Devices in Security Areas

  • ASTM F572-89(1994)e1 : Practice for Application of Film Security Cameras in Financial Institutions (Withdrawn 2001)

  • ASTM F573-89 : Specification for Residential Zinc-Coated Steel Chain-Link Fence Fabric (Withdrawn 1993)

  • ASTM F574-88 : Test Method for Evaluation of Polysilicon (Withdrawn 1996)

  • ASTM F575-78 : Classification for Particle Concentration in Liquids (Withdrawn 1982)

  • ASTM F576 : Test Method for Measurement of Insulator Thickness and Refractive Index on Silicon

  • ASTM F576-01 : Test Method for Measurement of Insulator Thickness and Refractive Index on Silicon Substrates by Ellipsometry (Withdrawn 2003)

  • ASTM F57-68(1980) : Method of Concentrating and Measuring Trace Quantities of Copper in High-Purity Water Used in the Electronics Industry (Withdrawn 1990)

  • ASTM F577 : Test Method for Particle Size Measurement of Dry Toners

  • ASTM F578-78(1987) : Test Method for Lasting Threshold and Slope Efficiency of Neodymium-Doped Laser Rods (Withdrawn 1994)

  • ASTM F579-80(1987) : Test Method for Face Flatness by Optical Non-Contact Technique (Withdrawn 1994)

  • ASTM F580-78(1991) : Test Method for Adhesion Strength of Bondable Films to Substrates in Ribbon-Wire Bonds (Withdrawn 1996)

  • ASTM F581-78(1991) : Practice for Accelerated Aging of Photoresist (Withdrawn 1996)

  • ASTM F582-78(1991) : Practice for Preparation of Photoresist for Analysis of Inorganic Contaminants (Withdrawn 1996)

  • ASTM F583-82(1990)E01 : Test Method for Photoresist Cleanness–Filterability (Withdrawn 1996)

  • ASTM F584 : Practice for Visual Inspection of Semiconductor Lead Bonding Wire

  • ASTM F585 : Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers

  • ASTM F586-79(1989)E01 : Test Method for Leak Rates Versus Y Stresses and M Factors for Gaskets (Withdrawn 1998)

  • ASTM F58-68(1996) : Test Method of Measuring Specific Resistivity of Electronic Grade Solvents (Withdrawn 1998)

  • ASTM F587-78(1990) : Practice for Sampling Ground Meat I Blenders (Withdrawn 1995)

  • ASTM F588 : Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, ExcludingGlazing Impact

  • ASTM F589 : Consumer Safety Specification for Non Powder Guns

  • ASTM F590 : Consumer Safety Specification for Non Powder Gun Projectiles and Propellants

  • ASTM F591-83 : Practice for Using the Computer Impact Print-Out Unit as a Test Instrument (Withdrawn 1989)

  • ASTM F592 : Terminology of Collated and Cohered Fasteners and Their Application Tools

  • ASTM F593 : Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

  • ASTM F594 : Specification for Stainless Steel Nuts

  • ASTM F595 : Test Methods for Vacuum Cleaner Hose/Durability and Reliability (All Plastic Hose)

  • ASTM F596 : Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners

  • ASTM F59-68(1988) : Method for Identification of Metal Particulate Contamination Found in Electronic and Microelectronic Components and Systems Using the Ring Oven Technique, With Spot Tests (Withdrawn 1994)

  • ASTM F597 : Practice for Evaluation of One Time Carbon Paper in Carbon Interleaved Business Forms byUse of an Electric Typewriter

  • ASTM F598 : Practice for Determining the Resistance of Carbonless Papers to Capsular Damage

  • ASTM F599 : Specification for Poly(Vinylidene Chloride) (PVDC) Plastic Lined Ferrous Metal Pipe andFittings (Withdrawn 2004) No Replacment

  • ASTM F599-95 : Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)

  • ASTM F600-78(1983) : Practice for Nondestructive Ultrasonic Evaluation of Socket and Butt Joints of Thermoplastic Piping (Withdrawn 1991)

  • ASTM F601 : Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants

  • ASTM F602 : Criteria for Implantable Thermoset Epoxy Plastics

  • ASTM F603 : Specification for High Purity Dense Aluminum Oxide for Surgical Implant Application

  • ASTM F604-94 : Specification for Silicone Elastomers Used in Medical Applications (Withdrawn 2001)

  • ASTM F605 : Practice for Determining the Compatibility of One Time Carbon Paper with Carbonless CopyPapers When Interleaved into the Same Manifold Set

  • ASTM F606 : Test Methods for Determining the Mechanical Properties of Externally and InternallyThreaded Fasteners, Washers, and Rivets

  • ASTM F60-68(1983) : Methods for Detection and Enumeration of Microbiological Contaminants in Water Used for Processing Electron and Microelectronic Devices (Withdrawn 1993)

  • ASTM F606M : Test Methods for Determining the Mechanical Properties of Externally and InternallyThreaded Fasteners, Washers, and Rivets [Metric]

  • ASTM F607 : Test Method for Adhesion of Gasket Materials to Metal Surfaces

  • ASTM F609 : Test Method for Using a Horizontal Pull Slipmeter (HPS)

  • ASTM F610/F610M : Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic PipeFittings by the Heat Reversion Technique

  • ASTM F611-79(1987) : Test Method for Wavefront Distortion of Nominally Plane Optical Elements Due to Refractive Index Inhomogeneity (Withdrawn 1994)

  • ASTM F612-88 : Practice for Cleaning Surfaces of Polished Silicon Slices (Withdrawn 1993)

  • ASTM F613-93 : Test Method for Measuring Diameter of Semiconductor Wafers (Withdrawn 2001)

  • ASTM F614-80(1991) : Test Method for Distortion of Optical Lenses Used in Photomask Fabrication (Withdrawn 1996)

  • ASTM F615-79(1988) : Practice for Determining Safe Current Pulse Operating Regions for Metallization on Semiconductor Components (Withdrawn 1995)

  • ASTM F615M : Practice for Determining Safe Current Pulse Operating Regions for Metallization onSemiconductor Components [Metric]

  • ASTM F61-68(1985) : Method of Test for Phosphate in Electronic Grade Hydrogen Peroxide Solutions (Withdrawn 1993)

  • ASTM F616-92 : Test Method for Measuring MOSFET Drain Leakage Current

  • ASTM F616M : Test Method for Measuring MOSFET Drain Leakage Current (Metric)

  • ASTM F617 : Test Method for Measuring MOSFET Linear Threshold Voltage

  • ASTM F618-79 : Method for Measuring MOSFET Saturated Threshold Voltage (Withdrawn 1985)

  • ASTM F619 : Practice for Extraction of Medical Plastics

  • ASTM F620 : Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants

  • ASTM F621 : Specification for Stainless Steel Forgings for Surgical Implants

  • ASTM F622 : Specification for Preformed Cranioplasty Plates That Can Be Altered

  • ASTM F623 : Performance Specification for Foley Catheter

  • ASTM F624 : Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for BiomedicalApplications

  • ASTM F625 : Practice for Classifying Water Bodies for Spill Control Systems

  • ASTM F626 : Specification for Fence Fittings

  • ASTM F62-68(1984) : Method of Test for Tin in Electronic Grade Hydrogen Peroxide Solutions (Withdrawn 1990)

  • ASTM F627 : Practice for Testing Flake of Single Strike Film Typewriter Ribbons

  • ASTM F628 : An American National Standard Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS)

  • ASTM F629 : Practice for Radiography of Cast Metallic Surgical Implants

  • ASTM F630-80 : Specification for Safety Consideration for Household Vacuum Cleaners (Withdrawn 1988)

  • ASTM F631 : Guide for Collecting Skimmer Performance Data in Controlled Environments

  • ASTM F632-90 : Test Method for Measuring Small-Signal Comon Emitter Current Gain of Transistors at High Frequencies (Withdrawn 1995)

  • ASTM F633-83 : Practice for Use of the High-Speed Printer as a Test Instrument for Carbon Paper (Withdrawn 1988)

  • ASTM F634-79 : Practice for Measurement of the Coating Transfer Resistance of Mechanical Carbonless CB Paper (Withdrawn 1986)

  • ASTM F635-85(1991) : Guide for Selection of Tests for Material Properties of Liquid Thermoset Encapsulating Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996)

  • ASTM F63-68(1978) : Specification for Electronic Grade Soluble Cellulose Nitrate (Withdrawn 1984)

  • ASTM F636-85(1991) : Guide for Selection of Tests for Material Properties of Transfer Molding Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996)

  • ASTM F637 : Specification for Format, Physical Properties, and Test Methods for 19 and 35 mm TestableTape Carrier for Perimeter Tape Carrier Bonded Semiconductor Devices (Withdrawn 2006) NoReplacement

  • ASTM F637-85(2001) : Specification for Format, Physical Properties, and Test Methods for 19 and 35 mm Testable Tape Carrier for Perimeter Tape Carrier-Bonded Semiconductor Devices (Withdrawn 2006)

  • ASTM F638 : Specification for Fine Aluminum 1% Magnesium Wire for Semiconductor Lead Bonding(Withdrawn 2006) No Replacement

  • ASTM F638-88(2001) : Specification for Fine Aluminum-1% Magnesium Wire for Semiconductor Lead-Bonding (Withdrawn 2006)

  • ASTM F639 : Specification for Polyethylene Plastics for Medical Applications

  • ASTM F641 : Specification for Implantable Epoxy Electronic Encapsulants

  • ASTM F642-79(1984) : Specification for Stainless Steel Flexible Wire for Surgical Fixations for Soft Tissue (Withdrawn 1995)

  • ASTM F643-79(1984) : Specification for Wrought Cobalt-Chromium Alloy Flexible Wire for Surgical Fixations for Soft Tissue (Withdrawn 1993)

  • ASTM F644-79(1984) : Specification for Wrought Cobalt-Chromium Alloy Flexible Wire for Surgical Fixations for Bone (Withdrawn 1993)

  • ASTM F645 : Guide for Selection, Design, and Installation of Thermoplastic Water Pressure PipingSystems

  • ASTM F64-69(1975) : Method of Test for Corrosive and Adhesive Effects of Gasket Materials on Metal Surfaces (Withdrawn 1981)

  • ASTM F647 : Practice for Evaluating and Specifying Implantable Shunt Assemblies for NeurosurgicalApplication

  • ASTM F648 : Specification for Ultra High Molecular Weight Polyethylene Powder and Fabricated Form forSurgical Implants

  • ASTM F649 : Practice for Secondary Calibration of Airborne Particle Counter Using Comparison Procedures

  • ASTM F650-80 : Practice for Determining Relative Bias of Two Particle Counters Using Comparison Procedures (Withdrawn 1990)

  • ASTM F651-80 : Method for Particle Single-Point Calibration by the Median Method (Withdrawn 1988)

  • ASTM F652-68(1985) : Method for Measuring Mica Stampings or Substitutes Used in Electron Devices and Lamps (Withdrawn 1992)

  • ASTM F653-84(1998)e1 : Test Method for Evaluation of Electrostatic Masters (Withdrawn 2002)

  • ASTM F654 : Specification for Residential Chain Link Fence Gates

  • ASTM F65-68(1983) : Specification for Primary Amyl Acetate (Mixed Isomers) for Use in Fabricating Electron Devices (Withdrawn 1990)

  • ASTM F657 : Test Method for Measuring Warp and Total Thickness Variation on Silicon Wafers byNoncontact Scanning (Withdrawn 2003) No Replacement

  • ASTM F657-92(1999) : Test Method for Measuring Warp and Total Thickness Variation on Silicon Wafers by Noncontact Scanning (Withdrawn 2003)

  • ASTM F658 : Practice for Calibration of a Liquid Borne Particle Counter Using an Optical System BasedUpon Light Extinction

  • ASTM F660 : Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters

  • ASTM F6-60(1987) : Test Method for Bulk Density of Germanium Dioxide (Withdrawn 1994)

  • ASTM F661-92 : Practice for Particle Count and Size Distribution Measurement in Batch Samples for Filter Evaluation Using an Optical Particle Counter (Withdrawn 2001)

  • ASTM F662-86(1992)E01 : Test Method for Measurement of Particle Count and Size Distribution in Batch Samples for Filter Evaluation Using an Electrical Resistance Particle Counter (Withdrawn 2001)

  • ASTM F663-80(1987) : Practice for Manual Analysis of Interferometric Data by Least-Squares Fitting to a Plane Reference Surface (Withdrawn 1994)

  • ASTM F664-80(1987) : Practice for Manual Analysis of Interferometric Data by Least-Squares Fitting to a Spherical Reference Surface and for Computer-Aided Analysis of Interferometric Data by Least-Squares Fitting to Both Plane and

  • ASTM F665 : Classification for Vinyl Chloride Plastics Used in Biomedical Application

  • ASTM F666-80 : Specification for Stainless Steel Flexible Wire for Surgical Fixation of Bone (Withdrawn 1993)

  • ASTM F668 : Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer Coated Steel ChainLink Fence Fabric

  • ASTM F66-84(1990) : Test Methods for Testing Photoresists Used in Microelectronic Fabrication (Withdrawn 1996)

  • ASTM F669-92 : Specification for Strength Requirements of Metal Posts and Rails for Industrial Chain Link Fence (Withdrawn 1995)

  • ASTM F67 : Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNSR50400, UNS R50550, UNS R50700)

  • ASTM F671 : Test Method for Measuring Flat Length on Wafers of Silicon and Other Electronic Materials(Withdrawn 2003) No Replacement

  • ASTM F671-99 : Test Method for Measuring Flat Length on Wafers of Silicon and Other Electronic Materials (Withdrawn 2003)

  • ASTM F672 : Test Method for Measuring Resistivity Profiles Perpendicular to the Surface of a SiliconWafer Using a Spreading Resistance Probe (Withdrawn 2003) No Replacement

  • ASTM F672-01 : Test Method for Measuring Resistivity Profiles Perpendicular to the Surface of a Silicon Wafer Using a Spreading Resistance Probe (Withdrawn 2003)

  • ASTM F673 : Test Methods for Measuring Resistivity of Semiconductor Slices or Sheet Resistance ofSemiconductor Films with a Noncontact Eddy Current Gage (Withdrawn 2003) No Replacement

  • ASTM F673-02 : Test Methods for Measuring Resistivity of Semiconductor Slices or Sheet Resistance of Semiconductor Films with a Noncontact Eddy-Current Gage (Withdrawn 2003)

  • ASTM F674 : Practice for Preparing Silicon for Spreading Resistance Measurements (Withdrawn 2003) NoReplacement

  • ASTM F674-92(1999) : Practice for Preparing Silicon for Spreading Resistance Measurements (Withdrawn 2003)

  • ASTM F675-91 : Test Method for Measuring Nonequilibrium Transient Photocurrents in P-N Junctions (Withdrawn 1995)

  • ASTM F676 : Test Method for Measuring Unsaturated TTL Sink Current

  • ASTM F677 : Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Usedin Electronic and Microelectronic Applications

  • ASTM F678-82 : Specification for Polyethylene Gas Pressure Pipe, Tubing, and Fittings (Withdrawn 1989)

  • ASTM F679 : Specification for Poly(Vinyl Chloride) (PVC) Large Diameter Plastic Gravity Sewer Pipe andFittings

  • ASTM F68 : Specification for Oxygen Free Copper in Wrought Forms for Electron Devices

  • ASTM F680 : Test Methods for Nails

  • ASTM F681 : Practice for Use of Branch Connections

  • ASTM F682 : Specification for Wrought Carbon Steel Sleeve Type Pipe Couplings

  • ASTM F685 : Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers UsingSingle Component Toner Systems

  • ASTM F686 : Practice for Evaluation of Image Quality Produced by a Carbonless Copy Paper with anElectric or Electronic Typewriter

  • ASTM F687-80 : Practice for On-Site Calibration of Liquid-Borne Automatic Particle Counters with Adjustable Individual Size Thresholds (Withdrawn 1988)

  • ASTM F688 : Specification for Wrought Cobalt 35Nickel 20Chromium 10Molybdenum Alloy Plate, Sheet,

  • ASTM F689 : Practice for Determination of the Temperature of Above Ground Plastic Gas Pressure PipeWithin Metallic Casings

  • ASTM F690 : Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems

  • ASTM F691-80(1991) : Practice for Preparing Photoplates for Measuring Flatness Deviation (Withdrawn 1996)

  • ASTM F692 : Test Method for Measuring Adhesion Strength of Solderable Films to Substrates

  • ASTM F693 : Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid SeamSealers

  • ASTM F694 : Test Method for Heel Attaching Strength of Women’s Shoes

  • ASTM F695 : Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of FootwearSole, Heel, and Related Materials

  • ASTM F696 : Specification for Leather Protectors for Rubber Insulating Gloves and Mittens

  • ASTM F69-68(1978) : Specification for Diethyl Oxalate for Use in Fabricating Electron Devices (Withdrawn 1984)

  • ASTM F697 : Practice for Care and Use of Athletic Mouth Protectors

  • ASTM F698 : Specification for Physical Information to be Provided for Amusement Rides and Devices

  • ASTM F699 : Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for SubsequentQuality Control Testing (Withdrawn 2005) No Replacement

  • ASTM F699-00e1 : Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing (Withdrawn 2005)

  • ASTM F7 : Specification for Aluminum Oxide Powder

  • ASTM F700 : Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments

  • ASTM F701 : Practice for Care and Handling of Neurosurgical Implants and Instruments

  • ASTM F702 : Specification for Polysulfone Resin for Medical Applications

  • ASTM F703 : Specification for Implantable Breast Prostheses

  • ASTM F704 : Practice for Selecting Bolting Lengths for Piping System Flanged Joints

  • ASTM F706 : Practice for Determination of Fusion Temperature of Dry Electrostatic Heat Fixing Toners

  • ASTM F70-68(1983) : Specification for Cathode Carbonates (Withdrawn 1990)

  • ASTM F707/F707M : Specification for Modular Gage Boards

  • ASTM F708 : Practice for Design and Installation of Rigid Pipe Hangers

  • ASTM F709-80(1991) : Specification for Gasket–Asbestos Metallic Cloth Material (Withdrawn 1993)

  • ASTM F71 : Practice for Using the Morphological Key for the Rapid Identification of Fibers forContamination Control in Electron Devices and Microelectronics (Withdrawn 2005) Replaced by D276

  • ASTM F710 : Practice for Preparing Concrete Floors to Receive Resilient Flooring

  • ASTM F711 : Specification for Fiberglass Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools

  • ASTM F712 : Test Methods for Electrically Insulating Plastic Guard Equipment for Protection of Workers

  • ASTM F715 : Test Methods for Coated Fabrics Used for Oil Spill Control and Storage

  • ASTM F716 : Methods of Testing Sorbent Performance of Absorbents

  • ASTM F71-68(1999) : Practice for Using the Morphological Key for the Rapid Identification of Fibers for Contamination Control in Electron Devices and Microelectronics (Withdrawn 2005)

  • ASTM F719 : Practice for Testing Biomaterials in Rabbits for Primary Skin Irritation

  • ASTM F72 : Specification for Gold Wire for Semiconductor Lead Bonding

  • ASTM F720 : Practice for Testing Guinea Pigs for Contact Allergens Guinea Pig Maximization Test

  • ASTM F721 : Specification for Gage Piping Assemblies

  • ASTM F722 : Specification for Welded Joints for Shipboard Piping Systems

  • ASTM F723 : Practice for Conversion Between Resistivity and Dopant Density for Boron Doped,

  • ASTM F723-99 : Practice for Conversion Between Resistivity and Dopant Density for Boron-Doped, Phosphorus-Doped, and Arsenic-Doped Silicon (Withdrawn 2003)

  • ASTM F724 : Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance

  • ASTM F725 : Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And FittingsStandards

  • ASTM F726 : Test Method for Sorbent Performance of Adsorbents

  • ASTM F727-81(1991) : Test Method for Measuring Transmittance of See-Through Photoplate (Withdrawn 1996)

  • ASTM F728 : Practice for Preparing An Optical Microscope for Dimensional Measurements (Withdrawn2003) No Replacement

  • ASTM F728-81(2003) : Practice for Preparing An Optical Microscope for Dimensional Measurements (Withdrawn 2003)

  • ASTM F729-81(1990)E01 : Test Methods for Temperature Coefficient of Resistance of Film Resistors (Withdrawn 1992)

  • ASTM F73 : Specification for Tungsten Rhenium Alloy Wire for Electron Devices and Lamps

  • ASTM F730-81(1990)E01 : Test Methods for Hermeticity of Electron Devices by a Weight-Gain Test (Withdrawn 1993)

  • ASTM F732 : Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses

  • ASTM F733 : Practice for Optical Distortion and Deviation of Transparent Parts Using the Double ExposureMethod

  • ASTM F734 : Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material

  • ASTM F735 : Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using theOscillating Sand Method

  • ASTM F736 : Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a FallingWeight

  • ASTM F737-86(1998)e1 : Performance Specification for Ice Hockey Skate Blades (Withdrawn 2002)

  • ASTM F738M : Specification for Stainless Steel Metric Bolts, Screws, and Studs

  • ASTM F740-82a(1993) : Definition of Terms Relating to Filtration (Withdrawn 2002)

  • ASTM F741-81(1987) : Method for Determining the Crystallographic Axes and Contrast Ratio of a Pockels Cell Electro-Optic Crystal Operating in the Longitudinal Mode (Withdrawn 1994)

  • ASTM F742-81(1987) : Practice for Evaluating an Interferometer (Withdrawn 1994)

  • ASTM F743-81(1987)E01 : Test Method for Measuring Contrast Ration of a Pair of Linear Polarizers for Visible Radiation (Withdrawn 1995)

  • ASTM F744M : Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits[Metric]

  • ASTM F745 : Specification for 18 Chromium 12.5 Nickel 2.5 Molybdenum Stainless Steel for Cast andSolution Annealed Surgical Implant Applications

  • ASTM F746 : Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

  • ASTM F747 : Terminology Relating to Amusement Rides and Devices

  • ASTM F74-73(1989) : Practice for Determining Hydrolytic Stability of Plastic Encapsulants for Electronic Devices (Withdrawn 1994)

  • ASTM F748 : Practice for Selecting Generic Biological Test Methods for Materials and Devices

  • ASTM F749 : Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit

  • ASTM F75 : Specification for Cobalt 28 Chromium 6 Molybdenum Alloy Castings and Casting Alloy forSurgical Implants (UNS R30075)

  • ASTM F750 : Practice for Evaluating Material Extracts by Systemic Injection in the Mouse

  • ASTM F751 : Test Method for Measuring Particle Size of Wide Size Range Dry Toners (Withdrawn 2003) No Replacement

  • ASTM F751-83(1997) : Test Method for Measuring Particle Size of Wide-Size Range Dry Toners (Withdrawn 2003)

  • ASTM F752-82(1989) : Test Method for Effective Series Resistance (ESR) and Capitance of Multilayer Ceramic Capacitors at High Frequencies (Withdrawn 1994)

  • ASTM F753-87 : Classification of Brassieres (Withdrawn 1998)

  • ASTM F755 : Specification for Selection of Porous Polyethylene for Use in Surgical Implants

  • ASTM F756 : Practice for Assessment of Hemolytic Properties of Materials

  • ASTM F757 : Test Method for Determining Energy Consumption of Copier and Copier DuplicatingEquipment

  • ASTM F758 : Specification for Smooth Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems forHighway, Airport, and Similar Drainage

  • ASTM F759-88E01 : Specification for Hot Chocolate Beverage Dispensers (Withdrawn 1995)

  • ASTM F76 : Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility inSingle Crystal Semiconductors

  • ASTM F760 : Specification for Food Service Equipment Manuals

  • ASTM F761 : Specification for Strength Requirements of Steel Posts and Rails for Residential Chain-LinkFence (Withdrawn 2003) No Replacement

  • ASTM F761-97 : Specification for Strength Requirements of Steel Posts and Rails for Residential Chain-Link Fence (Withdrawn 2003)

  • ASTM F762 : Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled forPassenger Car Tires

  • ASTM F763 : Practice for Short Term Screening of Implant Materials

  • ASTM F764 : Practice for Compatibility of Materials with High Energy Propellants (Impact SensitivityThreshold Technique) (Withdrawn 2003) No Replacement

  • ASTM F764-82(1994) : Practice for Compatibility of Materials with High-Energy Propellants (Impact Sensitivity Threshold Technique) (Withdrawn 2003)

  • ASTM F765 : Specification for Wildcats, Ship Anchor Chain

  • ASTM F766 : Test Method for Melting Point of Waxes

  • ASTM F767 : Test Method for Image Stability of Chemical Carbonless Paper to Light

  • ASTM F768-82(1987) : Method for Specular Reflectance and Transmittance Measurements of Optically Flat-Coated and Non-Coated Specimens (Withdrawn 1994)

  • ASTM F769 : Test Method for Measuring Transistor and Diode Leakage Currents

  • ASTM F770 : Practice for Ownership and Operation of Amusement Rides and Devices

  • ASTM F771 : Specification for Polyethylene (PE) Thermoplastic High Pressure Irrigation Pipeline Systems

  • ASTM F772-82(1990) : Test Method for Noise Quality of Film-Type Resistors (Withdrawn 1996)

  • ASTM F773-92 : Practice for Measuring Dose Rate Response of Linear Integrated Circuits

  • ASTM F773M : Practice for Measuring Dose Rate Response of Linear Integrated Circuits [Metric]

  • ASTM F774-82 : Guide for Analysis of Latchup Susceptibility in Bipolar Integrated Circuits (Withdrawn 1989)

  • ASTM F775-88 : Test Method for Wafer and Slice Flatness by Interferometric (Withdrawn 1991)

  • ASTM F77-69(1996) : Test Method for Apparent Density of Ceramics for Electron Device and Semiconductor Application (Withdrawn 2001)

  • ASTM F777-89 : Test Method for Resistance of Electrical Wire Insulation Materials to Flame at 60 Degrees (Withdrawn 1997)

  • ASTM F778 : Methods for Gas Flow Resistance Testing of Filtration Media

  • ASTM F779 : Test Method for Torsion Characteristic of Alpine Skis

  • ASTM F78 : Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards

  • ASTM F780 : Test Method for Linear Deformation and Breaking Strength of Alpine Skis

  • ASTM F781 : Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic Lined Ferrous Metal Pipeand Fittings (Withdrawn 2004) No Replacement

  • ASTM F781-95 : Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)

  • ASTM F782 : Specification for Doors, Furniture, Marine

  • ASTM F783 : Specification for Staple, Handgrab, Handle, and Stirrup Rung

  • ASTM F784-82(1990) : Test Method for Calibrating Radioisotope Hermetric Test Apparatus (Withdrawn 1996)

  • ASTM F785-82(1990)E01 : Test Method for Hermeticity of Sealed Devices by a Radioisotope Test (Withdrawn 1996)

  • ASTM F786-82(1991) : Specification for Metallic Bone Plates (Withdrawn 1998)

  • ASTM F787-82(1991) : Specification for Metallic Nail-Plate Appliances (Withdrawn 1998)

  • ASTM F788/F788M : Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

  • ASTM F789 : Specification for Type PS 46 and Type PS 115 Poly(Vinyl Chloride) (PVC) Plastic Gravity FlowSewer Pipe and Fittings (Withdrawn 2004) No Replacement

  • ASTM F789-95a : Specification for Type PS-46 and Type PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings (Withdrawn 2004)

  • ASTM F79 : Specification for Type 101 Sealing Glass

  • ASTM F790 : Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

  • ASTM F791 : Test Method for Stress Crazing of Transparent Plastics

  • ASTM F792 : Practice for Evaluating the Imaging Performance of Security X Ray Systems

  • ASTM F793 : Classification of Wall Covering by Use Characteristics

  • ASTM F794 : Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based onControlled Inside Diameter

  • ASTM F795-88(1993) : Practice for Determining the Performance of a Filter Medium Employing a Single-Pass, Constant-Rate, Liquid Test (Withdrawn 2002)

  • ASTM F796-88(1993) : Practice for Determining The Performance of a Filter Medium Employing a Single-Pass, Constant-Pressure, Liquid Test (Withdrawn 2002)

  • ASTM F797-88(1993) : Practice for Determining the Performance of a Filter Medium Employing a Multipass, Constant-Rate, Liquid Test (Withdrawn 2002)

  • ASTM F798 : Practice for Determining Gettering Rate, Sorption Capacity, and Gas Content ofNonevaporable Getters in the Molecular Flow Region

  • ASTM F799 : Specification for Cobalt 28 Chromium 6 Molybdenum Alloy Forgings for Surgical Implants(UNS R31537, R31538, R31539)

  • ASTM F800-89 : Specification for Corrugated Poly(Vinyl Chloride) (PVC) Tubing and Compatible Fittings (Withdrawn 1992)

  • ASTM F801 : Test Method for Measuring Optical Angular Deviation of Transparent Parts

  • ASTM F802 : Guide for Selection of Certain Walkway Surfaces When Considering Footwear Traction

  • ASTM F804-83(1990)E01 : Practice for Producing Spin Coating Resist Thickness Curves (Withdrawn 1997)

  • ASTM F805-83(1992)E01 : Test Method for Photoplate Surface Flatness by Inteferometric Non-Contact Technique (Withdrawn 1996)

  • ASTM F806 : Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials

  • ASTM F807 : Practice for Determining Resolution Capability of Office Copiers

  • ASTM F808-83(1988) : Guide for Collecting Skimmer Performance Data in Uncontrolled Environments (Withdrawn 1998)

  • ASTM F809/F809M-95e1 : Specification for Large Diameter Polybutylene Plastic Pipe (Withdrawn 2000)

  • ASTM F80-94 : Test Method for Crystallographic Perfection of Epitaxial Deposits of Silicon by Etching Techniques (Withdrawn 1998)

  • ASTM F809M-95 : Specification for Large Diameter Polybutylene Plastic Pipe (Metric) (Withdrawn 1998)

  • ASTM F81 : Test Method for Measuring Radial Resistivity Variation on Silicon Wafers (Withdrawn 2003) No Replacement

  • ASTM F810 : Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste DisposalAbsorption Fields

  • ASTM F81-01 : Test Method for Measuring Radial Resistivity Variation on Silicon Wafers (Withdrawn 2003)

  • ASTM F811 : Practice for Accelerometer Use in Vehicles for Tire Testing

  • ASTM F812/F812M : Specification for Surface Discontinuities of Nuts, Inch and Metric Series

  • ASTM F813 : Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices

  • ASTM F814-84B : Test Method for Specific Optical Density of Smoke Generated by Solid Materials for Aerospace Applications (Withdrawn 1995)

  • ASTM F815-88(1993)e1 : Test Method for Detection of Epitaxial Spikes (Withdrawn 1999)

  • ASTM F816 : Test Method for Combined Fine and Gross Leaks for Large Hybrid Microcircuit Packages

  • ASTM F817-83(1990) : Test Method for Characterization of Film Resistor Materials and Processes (Withdrawn 1996)

  • ASTM F818 : Terminology Relating to Spill Response Barriers

  • ASTM F819 : Terminology Relating to Electrical Protective Equipment for Workers

  • ASTM F821/F821M : Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

  • ASTM F821-95 : Specification for Doors and Frames, Steel, Interior, Marine (Replaced 2001)

  • ASTM F822 : Specification for Chest of Drawers (Chiffonier), Steel, Marine

  • ASTM F823 : Specification for Desk, Log, Marine, Steel, with Cabinet

  • ASTM F824 : Specification for Tables, Mess, Marine, Steel

  • ASTM F825 : Specification for Drawers, Furniture, Marine, Steel

  • ASTM F826 : Specification for Tops, Furniture, Marine, Steel

  • ASTM F82-67(1973) : Recommended Practice for Fast Quality Check on Immersion for Nonmetallic Gasket Materials (Withdrawn 1976)

  • ASTM F828-83 : Test Method for Radiant Heat Resistance of Aircraft Inflatable Evacuation Slide/Slide Raft Materials (Withdrawn 1995)

  • ASTM F829-83 : Test Method for Determining Protein Efficiency Ratio for Meat and Meat Products (Withdrawn 1991)

  • ASTM F83 : Practice for Definition and Determination of Thermionic Constants of Electron Emitters

  • ASTM F830-83 : Practice for Preparation of Meat (Withdrawn 1991)

  • ASTM F831-83 : Test Method for Determining Net Protein Ratio for Meat and Meat Products (Withdrawn 1991)

  • ASTM F832 : Classification for Security Seals

  • ASTM F833 : Consumer Safety Performance Specification for Carriages and Strollers

  • ASTM F834 : Consumer Safety Specification for Toy Chests

  • ASTM F835 : Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

  • ASTM F835M : Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]

  • ASTM F836M : Specification for Style 1 Stainless Steel Metric Nuts

  • ASTM F837 : Specification for Stainless Steel Socket Head Cap Screws

  • ASTM F837M : Specification for Stainless Steel Socket Head Cap Screws [Metric]

  • ASTM F838 : Test Method for Determining Bacterial Retention of Membrane Filters Utilized for LiquidFiltration

  • ASTM F838-83(1993) : Test Method for Determining Bacterial Retention Of Membrane Filters Utilized For Liquid Filtration (Withdrawn 2002)

  • ASTM F839 : Specification for Cautionary Labeling of Portable Gasoline Containers for Consumer Use

  • ASTM F84 : Test Method for Measuring Resistivity of Silicon Wafers With an In Line Four Point Probe(Withdrawn 2003) No Replacement

  • ASTM F840 : Specification for Ladders, Fixed, Vertical, Steel, Ship’s

  • ASTM F84-02 : Test Method for Measuring Resistivity of Silicon Wafers With an In-Line Four-Point Probe (Withdrawn 2003)

  • ASTM F841 : Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels

  • ASTM F842 : Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

  • ASTM F843 : Test Method for Assessing the Color Strength and Dispersibility of Alkali Blue Pigment in HotMelt Carbon Copy Paper Ink

  • ASTM F844 : Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

  • ASTM F845 : Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003) NoReplacement

  • ASTM F845-96 : Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003)

  • ASTM F846 : Guide for Testing Performance of Amusement Rides and Devices

  • ASTM F847 : Test Methods for Measuring Crystallographic Orientation of Flats on Single Crystal SiliconWafers by X Ray Techniques (Withdrawn 2003) No Replacement

  • ASTM F847-02 : Test Methods for Measuring Crystallographic Orientation of Flats on Single Crystal Silicon Wafers by X-Ray Techniques (Withdrawn 2003)

  • ASTM F848-83(1988) : Method for Determining the Lattice Constant of Single Crystal Gadolinium Gallium Garnet (Withdrawn 1992)

  • ASTM F849-83(1988) : Method for Identification and Test of Structures and Contaminants Seen on Polished Gadolinium Gallium Surfaces (Withdrawn 1992)

  • ASTM F85 : Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes

  • ASTM F850-83(1988) : Test Method for Crystallographic Perfection of Gadolinium Gallium Garnet by Preferential Etch Techniques (Withdrawn 1992)

  • ASTM F851 : Test Method for Self Rising Seat Mechanisms

  • ASTM F852 : Specification for Portable Gasoline Containers for Consumer Use

  • ASTM F853 : Practice for Maintenance Procedures for Amusement Rides and Devices

  • ASTM F854 : Test Method for Cleanliness of Carbon Paper

  • ASTM F855 : Specifications for Temporary Protective Grounds to Be Used on De energized Electric PowerLines and Equipment

  • ASTM F856 : Practice for Mechanical Symbols, Shipboard/Heating, Ventilation, and Air Conditioning(HVAC)

  • ASTM F859 : Specification for Heat Sanitizing Commercial Dishwashing Machines, Multiple Tank, ConveyorRack Type

  • ASTM F86 : Practice for Surface Preparation and Marking of Metallic Surgical Implants

  • ASTM F860 : Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type

  • ASTM F861 : Specification for Commercial Dishwashing Racks

  • ASTM F863-84(1992)E01 : Practice for Detection of Defects in Spin-Coated Resist (Withdrawn 1996)

  • ASTM F8-64 : Recommended Practice for Testing Electron Tube Materials Using Reference Triodes (Withdrawn 1973)

  • ASTM F864-84(1992) : Practice for Inspection of Hardsurface Glass Photoplates (Withdrawn 1996)

  • ASTM F865-84(1996) : Test Methods for Gross Camber of Ceramic Substrates for Thick Film Applications (Withdrawn 2001)

  • ASTM F866-84(1990)E01 : Test Method for Measuring the Package Attenuation Coefficient of a Sealed Device for Radioisotope Hermetic Test (Withdrawn 1996)

  • ASTM F867M-94A : Guide for Ionizing Radiation Effects (Total Dose) Testing of Semiconductor Devices [Metric] (Withdrawn 1998)

  • ASTM F868 : Classification for Laminated Composite Gasket Materials

  • ASTM F869 : Terminology Relating to Athletic Shoes and Biomechanics

  • ASTM F870 : Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and DimensionalMeasurements

  • ASTM F871M-98 : Specification for Electrodeposited Coatings on Threaded Components [Metric] (Withdrawn 2001)

  • ASTM F872-84(1990) : Specification for Filter Units, Air Conditioning : Viscous-Impingement Type, Cleanable (Withdrawn 1999)

  • ASTM F873 : Guide for Incinerating Oil Spill Wastes at Temporary Field Locations

  • ASTM F874 : Test Method for Temperature Measurement and Profiling for Microwave Susceptors

  • ASTM F875 : Test Method for Evaluation of Large Area Density and Background on Office Copiers

  • ASTM F876 : Specification for Crosslinked Polyethylene (PEX) Tubing

  • ASTM F87-68(1973) : Method of Test for Rate of Grease Penetration of Flexible Barrier Materials (Withdrawn 1980)

  • ASTM F878-95 : Specification for Polybutylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing (Withdrawn 2000)

  • ASTM F879 : Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

  • ASTM F879M : Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws[Metric]

  • ASTM F88 : Test Method for Seal Strength of Flexible Barrier Materials

  • ASTM F880 : Specification for Stainless Steel Socket Set Screws

  • ASTM F880M : Specification for Stainless Steel Socket Set Screws [Metric]

  • ASTM F881 : Specification for Silicone Elastomer Facial Implants

  • ASTM F882 : Performance and Safety Specification for Cryosurgical Medical Instruments

  • ASTM F883 : Performance Specification for Padlocks

  • ASTM F884 : Test Method for Motor Life Evaluation of a Built In (Central Vacuum) Vacuum Cleaner

  • ASTM F885 : Specification for Envelope Dimensions for Bronze Globe Valves NPS / to 2

  • ASTM F886-84(1990) : Test Method for Apparent Nitrogen Digestibility for Meat and Meat Products (Withdrawn 1995)

  • ASTM F887 : Specifications for Personal Climbing Equipment

  • ASTM F888 : Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in aVacuum Cleaner

  • ASTM F889-84(1990) : Test Method for Characterizing a Combination of Properties of Planar Surfaces to a Technical Level by a Vacuum Hold-Down Technique (Withdrawn 1996)

  • ASTM F890-84(1992) : Practice for Determining Pinhole Density in Photoresist Films Used in Microelectronic Device Processing (Withdrawn 1996)

  • ASTM F892 : Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn2001) No Replacement

  • ASTM F892-95 : Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn 2001)

  • ASTM F893 : Guide for Inspection of Amusement Rides and Devices

  • ASTM F894 : Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

  • ASTM F895 : Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity

  • ASTM F89-68(1973) : Method for Determination of the Modulus of a Flexible Barrier Material by Sonic Method (Withdrawn 1980)

  • ASTM F896-90(1999) : Specification for Flexible Fiberoptic Bronchoscopes (Withdrawn 2002)

  • ASTM F897 : Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws

  • ASTM F898-85 : Practice for Permanent Marking of Orthopedic Implant Components (Withdrawn 1992)

  • ASTM F899 : Specification for Stainless Steel for Surgical Instruments

  • ASTM F90 : Specification for Wrought Cobalt 20 Chromium 15 Tungsten 10 Nickel Alloy for SurgicalImplant Applications (UNS R30605)

  • ASTM F901 : Specification for Aluminum Transmission Tower Bolts and Nuts

  • ASTM F902-84(1990) : Practice for Calculating the Average Circular-Capillary-Equivalent Pore Diameter in Filter Media from Measurements of Porosity and Permeability (Withdrawn 1999)

  • ASTM F903 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids

  • ASTM F904 : Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Madefrom Flexible Materials

  • ASTM F905 : Practice for Qualification of Polyethylene Saddle Fused Joints

  • ASTM F906 : Specification for Letters and Numerals for Ships

  • ASTM F907-85(1992) : Test Method for Measurement of Rotational Acceleration of a Wafer for Photoresist Spin Coating (Withdrawn 1997)

  • ASTM F908-85(1990) : Practice for Evaluating Safelights for Photoresists (Withdrawn 1996)

  • ASTM F909 : Terminology Relating to Printers

  • ASTM F91 : Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms andClean Work Stations by Use of a Condensation Nuclei Detector

  • ASTM F910 : Specification for Face Guards for Youth Baseball

  • ASTM F911-85(1994) : Test Method for Flexibility of Running Shoes (Withdrawn 2002)

  • ASTM F912 : Specification for Alloy Steel Socket Set Screws

  • ASTM F913 : Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe

  • ASTM F914 : Test Method for Acoustic Emission for Insulated and Non Insulated Aerial Personnel Devices

  • ASTM F915-85 : Specification for Bitts, Ship Mooring, Cast Steel (Double Barrel) (Withdrawn 1995)

  • ASTM F916-85(1993)e1 : Specification for Elevators, Shipboard, Electromechanical Passenger, and Stores (Withdrawn 2002)

  • ASTM F917 : Specification for Commercial Food Waste Disposers

  • ASTM F919 : Specification for Slicing Machines, Food, Electric

  • ASTM F92 : Practice for Determination of Character Yield of Inked Fabric Typewriter and Printer Ribbons

  • ASTM F920 : Specification for Minimum Performance and Safety Requirements for Resuscitators Intendedfor Use With Humans

  • ASTM F921 : Terminology Relating to Hemostatic Forceps

  • ASTM F922 : Test Method for Motor Life Evaluation of an Electric Motorized Nozzle

  • ASTM F923 : Guide to Properties of High Visibility Materials Used to Improve Individual Safety

  • ASTM F923-00 : Guide to Properties of High Visibility Materials Used to Improve Individual Safety (Withdrawn 2006)

  • ASTM F924 : Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings

  • ASTM F925 : Test Method for Resistance to Chemicals of Resilient Flooring

  • ASTM F927-86(1994) : Specification for Pediatric Tracheostomy Tubes (Withdrawn 1999)

  • ASTM F928 : Test Methods for Edge Contour of Circular Semiconductor Wafers and Rigid Disk Substrates(Withdrawn 2003) No Replacement

  • ASTM F928-02 : Test Methods for Edge Contour of Circular Semiconductor Wafers and Rigid Disk Substrates (Withdrawn 2003)

  • ASTM F929-85(1999) : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Marine Mammals (Withdrawn 2002)

  • ASTM F930-85(1993)e1 : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Rocky Shores (Withdrawn 2001)

  • ASTM F931-85(1999) : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response- Seagrasses (Withdrawn 2002)

  • ASTM F932-85(1999) : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Coral Reefs (Withdrawn 2002)

  • ASTM F933-85(1994)e1 : Guide for Evaluation of Oil Water Separation Systems for Spilled Oil Recovery Applications (Withdrawn 2001)

  • ASTM F934 : Specification for Standard Colors for Polymer Coated Chain Link Fence Materials

  • ASTM F935 : Test Method for Comparing Cover Up Correction Media

  • ASTM F936-85(1991) : Specification for Chocks, Panama, Mooring Cast Steel (Withdrawn 1997)

  • ASTM F93-77 : Recommended Practice for Preparation of Specifications for the Procurement of Photomasks (Withdrawn 1979)

  • ASTM F937-85(1991) : Specification for Chocks, Ship Mooring Cast Steel (Withdrawn 1997)

  • ASTM F938-85 : Specification for Bitts, Ship Mooring, Welded Steel (Double Barrel) (Withdrawn 1995)

  • ASTM F939 : Practice for Selection of Release Torque Values for Alpine Ski Bindings

  • ASTM F940 : Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint),

  • ASTM F941 : Practice for Inspection of Marine Surface Preparation and Coating Application

  • ASTM F942 : Guide for Selection of Test Methods for Interlayer Materials for Aerospace TransparentEnclosures

  • ASTM F943-90 : Test Method for Measuring Halation of Transparent Parts (Withdrawn 1996)

  • ASTM F944 : Specification for Properties of Adult Alpine Ski Boots (Withdrawn 2004) No Replacement 0 ASTM 0

  • ASTM F944-97 : Specification for Properties of Adult Alpine Ski Boots (Withdrawn 2004)

  • ASTM F945 : Test Method for Stress Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials

  • ASTM F946 : Guide for Establishing Security Seal Control and Accountability Procedures

  • ASTM F94-69(1984) : Method of Test for Aluminum in Electronic Grade Hydrogen Peroxide (Withdrawn 1992)

  • ASTM F947 : Test Method for Determining Low Level X Radiation Sensitivity of Photographic Films(Withdrawn 2005) No Replacement

  • ASTM F947-85(1996) : Test Method for Determining Low-Level X-Radiation Sensitivity of Photographic Films (Withdrawn 2005)

  • ASTM F948 : Test Method for Time to Failure of Plastic Piping Systems and Components Under ConstantInternal Pressure With Flow

  • ASTM F949 : Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interiorand Fittings

  • ASTM F95 : Test Method for Thickness of Lightly Doped Silicon Epitaxial Layers on Heavily Doped SiliconSubstrates Using an Infrared Dispersive Spectrophotometer (Withdrawn 2003) No Replacement

  • ASTM F950 : Test Method for Measuring the Depth of Crystal Damage of a Mechanically Worked SiliconSlice Surface by Angle Polishing and Defect Etching (Withdrawn 2003) No Replacement

  • ASTM F950-02 : Test Method for Measuring the Depth of Crystal Damage of a Mechanically Worked Silicon Slice Surface by Angle Polishing and Defect Etching (Withdrawn 2003)

  • ASTM F951 : Test Method for Determination of Radial Interstitial Oxygen Variation in Silicon Wafers(Withdrawn 2003) No Replacement

  • ASTM F951-02 : Test Method for Determination of Radial Interstitial Oxygen Variation in Silicon Wafers (Withdrawn 2003)

  • ASTM F952 : Specification for Mixing Machines, Food, Electric

  • ASTM F954-91 : Specification for Respiratory Home Care (Withdrawn 1997)

  • ASTM F955 : Test Method for Evaluating Heat Transfer through Materials for Protective Clothing UponContact with Molten Substances

  • ASTM F956 : Specification for Bell, Cast, Sound Signalling

  • ASTM F957 : Specification for Gong, Sound Signaling

  • ASTM F958-85(1990) : Practice for Developing Guides for Using Consumer Products (Withdrawn 1993)

  • ASTM F95-89(2000) : Test Method for Thickness of Lightly Doped Silicon Epitaxial Layers on Heavily Doped Silicon Substrates Using an Infrared Dispersive Spectrophotometer (Withdrawn 2003)

  • ASTM F959 : Specification for Compressible Washer Type Direct Tension Indicators for Use with StructuralFasteners

  • ASTM F959M : Specification for Compressible Washer Type Direct Tension Indicators for Use WithStructural Fasteners [Metric]

  • ASTM F96 : Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms

  • ASTM F960-86(2000) : Specification for Medical and Surgical Suction and Drainage Systems (Withdrawn 2003)

  • ASTM F962 : Specification for Oil Spill Response Boom Connection : Z Connector

  • ASTM F965 : Specification for Rigid Laryngoscopes for Tracheal Intubation Hook On Fittings forLaryngoscope Handles and Blades with Lamps

  • ASTM F966 : Consumer Safety Specification for Full Size and Non Full Size Baby Crib Corner Post Extensions

  • ASTM F967 : Practice for Security Engineering Symbols

  • ASTM F968 : Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers

  • ASTM F969 : Practice for Construction of Chain Link Tennis Court Fence

  • ASTM F9-69(1986) : Specification for Round Wire for Use as Grid Siderods in Electron Tubes (Withdrawn 1992)

  • ASTM F97 : Practices for Determining Hermeticity of Electron Devices by Dye Penetration

  • ASTM F970 : Test Method for Static Load Limit

  • ASTM F971-86(1999) : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response : Mangroves (Withdrawn 2002)

  • ASTM F972-86(1993)e1 : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Nearshore Subtidal (Withdrawn October 2001)

  • ASTM F973-86(1993)e1 : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response : Tidal Flats (Withdrawn 2001)

  • ASTM F974 : Practice for Determination of the Color Response of an Electrostatic Copying System, Blackand White Output

  • ASTM F975-86(1993)E01 : Specification for Auxiliary Single Stage Steam Turbines for Shipboard Use (Withdrawn 2000)

  • ASTM F978 : Test Method for Characterizing Semiconductor Deep Levels by Transient CapacitanceTechniques (Withdrawn 2003) No Replacement

  • ASTM F978-02 : Test Method for Characterizing Semiconductor Deep Levels by Transient Capacitance Techniques (Withdrawn 2003)

  • ASTM F979 : Test Method for Hermeticity of Hybrid Microcircuit Packages Prior to Lidding

  • ASTM F980-92 : Guide for The Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices

  • ASTM F980M : Guide for Measurement of Rapid Annealing of Neutron Induced Displacement Damage inSilicon Semiconductor Devices [Metric]

  • ASTM F981 : Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respectto Effect of Materials on Muscle and Bone

  • ASTM F982 : Specification for Disclosure of Characteristics of Surgically Implanted Clamps for CarotidOcclusion

  • ASTM F983 : Practice for Permanent Marking of Orthopaedic Implant Components

  • ASTM F984-86(1992) : Specification for Cutaneous Gas Monitoring Devices for Oxygen and Carbon Dioxide (Withdrawn 1999)

  • ASTM F985 : Specification for Panama Canal Pilot Platform

  • ASTM F986 : Specification for Suction Strainer Boxes

  • ASTM F987 : Specification for Portable Intermediate Flush Deck Stanchion

  • ASTM F98-72(1977) : Recommended Practices for Determining Hermeticity of Electron Devices by a Bubble Test (Withdrawn 1992)

  • ASTM F988-86 : Guide for Specifying Carbon-Fiber Randomly Reinforced Ultra-High-Molecular-Weight Polyethylene for Medical Devices (Withdrawn 1992)

  • ASTM F989-86 : Methods of Testing Spill Control Barrier Tension Members (Withdrawn 1995)

  • ASTM F990-86(1993)e1 : Guide for Ecological Considerations for Use of Chemical Dispersants in Oil Spill Response-Sandy Beaches (Withdrawn 2001)

  • ASTM F991-86 : Specification for Docking/Drain Plug and Boss Assemblies

  • ASTM F991M : Specification for Docking/Drain Plug and Boss Assemblies [Metric]

  • ASTM F991M-95 : Specification for Docking/Drain Plug and Boss Assemblies [Metric] (Withdrawn 2004)

  • ASTM F992 : Specification for Valve Label Plates

  • ASTM F993 : Specification for Valve Locking Devices

  • ASTM F994 : Specification for Design and Installation of Overboard Discharge Hull PenetrationConnections

  • ASTM F995 : Practice for Estimating Toner Usage in Copiers Utilizing Dry Two Component Developer

  • ASTM F996 : Test Method for Separating an Ionizing Radiation Induced MOSFET Threshold Voltage ShiftInto Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold CurrentVoltage Characteristics

  • ASTM F997 : Specification for Polycarbonate Resin for Medical Applications

  • ASTM F999-86(1993)e1 : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Gravel or Cobble Beaches (Withdrawn 2001)

    • 위 ASTM (American Society for Testing and Materials) 규격 목록은 ASTM 규격집 규격번호와 제목을 발췌, 열거한 것입니다.[출처 : www.astm.org ]

    Company Info :

    퍼포먼스네트워크(주)

    강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
    Tel : 02-980-9800(대표전화)
    Tel : 070-4221-8620(해외)
    E-Mail: info @ anytest.co.kr (Technical,시험인증)

    ALT_TEXT
    QR Code Generator
    • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

      [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

    • MIL-Spec Documents2013년 December 11일 - 6:40 pm

      MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

    • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

      아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

    • IP Code2016년 April 12일 - 6:42 pm

      IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

    • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

      ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

    April 2024
    M T W T F S S
    « Aug    
    1234567
    891011121314
    15161718192021
    22232425262728
    2930  
    © Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.