ASTM BXXXX

  • ASTM ANS/ISO10079.1-99 : Medical Suction Equipment.Part 1 : Electrically Powered Suction Equipment.Safety Requirements Approved as an American National Standard with Deviations by International
  • ASTM ANS/ISO10079.2-99 : Medical Suction Equipment.Part 2 : Manually Powered Suction Equipment Approved as an American National Standard with Deviations by International
  • ASTM ANS/ISO10079.3-99 : Medical Suction Equipment.Part 3 : Suction Equipment Powered from a Vacuum or Pressure Source Approved as an American National Standard with Deviations by International
  • ASTM ANS/ISO11195-95 : Gas Mixers for Medical Use.Stand-alone Gas Mixers Approved as an American National Standard with Deviations by international
  • ASTM ANS/ISO15002-00 : Flow-metering devices for connection to terminal units of medical gas pipeline systems
  • ASTM ANS/ISO1522-98(E) : Paints and Varnishes.Pendulum Damping Test Approved as an American National Standard by International
  • ASTM ANS/ISO17025-05 : General Requirements for the Competence of Testing and Calibration Laboratories
  • ASTM ANS/ISO4135-01 : Anaesthetic and Respiratory Equipment. Vocabulary Approved as an American National Standard with Deviations by International
  • ASTM ANS/ISO5359-00E : Low-Pressure Hose Assemblies for Use with Medical Gases Approved as an American National Standard with Deviations by International
  • ASTM ANS/ISO5360-93 : Anesthetic Vaporizes.Agent-Specific Filling Systems Approved as an American National Standard with Deviations by International
  • ASTM ANS/ISO5361-99 : Anaesthetic and Respiratory Equipment.Tracheal Tubes and Connectors Approved as an American National Standard by International
  • ASTM ANS/ISO5362-00 : Anaesthetic Reservoir Bags Approved as an American National Standard by International
  • ASTM ANS/ISO5366.1-00E : Anaesthetic and Respiratory Equipment.TracheostomyTubes.Part 1 : Tubes and Connectors for Use in Adults Approved as an American National Standard by International
  • ASTM ANS/ISO7767-97 : Oxygen Monitors for Monitoring Patient Breathing Mixtures-Safety Requirements Approved as an American National Standard with Deviations by International
  • ASTM ANSI : H35.2 American National Standard Dimensional Tolerances for Aluminum Mill Products
  • ASTM ANSI/ISO/IEC17024-03 : Conformity assessment.General requirements for bodies operating certification of persons
  • ASTM ANSIZ41 : American National Standard for Personal Protection Protective Footwear Replaced by F2412 0 ASTM 0
  • ASTM ANSIZ41-99 : American National Standard for Personal Protection – Protective Footwear
  • ASTM B0001-01 : Specification for Hard-Drawn Copper Wire
  • ASTM B0002-00 : Specification for Medium-Hard-Drawn Copper Wire
  • ASTM B0003-01 : Specification for Soft or Annealed Copper Wire
  • ASTM B0005-00 : Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
  • ASTM B0006-03 : Specification for Zinc
  • ASTM B0008-04 : Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
  • ASTM B0009-90R03 : Specification for Bronze Trolley Wire
  • ASTM B0016/B0016M-00 : Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
  • ASTM B0019-01 : Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
  • ASTM B0021/B0021M-01E01 : Specification for Naval Brass Rod, Bar, and Shapes
  • ASTM B0022-02 : Specification for Bronze Castings for Bridges and Turntables
  • ASTM B0023-00 : Specification for White Metal Bearing Alloys (Known Commercially as |P`Babbitt Metal|P’)
  • ASTM B0026/B0026M-03 : Specification for Aluminum-Alloy Sand Castings
  • ASTM B0029-03 : Specification for Refined Lead
  • ASTM B0030-04 : Specification for Copper Alloys in Ingot Form
  • ASTM B0032-04 : Specification for Solder Metal
  • ASTM B0033-04 : Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
  • ASTM B0036/B0036M-01 : Specification for Brass Plate, Sheet, Strip, And Rolled Bar
  • ASTM B0037-03 : Specification for Aluminum for Use in Iron and Steel Manufacture
  • ASTM B0039-79R04 : Specification for Nickel
  • ASTM B0042-02E01 : Specification for Seamless Copper Pipe, Standard Sizes
  • ASTM B0043-98R04 : Specification for Seamless Red Brass Pipe, Standard Sizes
  • ASTM B0047-95AR01 : Specification for Copper Trolley Wire
  • ASTM B0048-00 : Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
  • ASTM B0049-98R04 : Specification for Copper Rod Drawing Stock for Electrical Purposes
  • ASTM B0061-02 : Specification for Steam or Valve Bronze Castings
  • ASTM B0062-02 : Specification for Composition Bronze or Ounce Metal Castings
  • ASTM B0063-90R01 : Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
  • ASTM B0066-95R03 : Specification for Bronze Castings for Steam Locomotive Wearing Parts
  • ASTM B0067 : Specification for Car and Tender Journal Bearings, Lined
  • ASTM B0068-02 : Specification for Seamless Copper Tube, Bright Annealed
  • ASTM B0068M-99 : Specification for Seamless Copper Tube, Bright Annealed [Metric]
  • ASTM B0069-01A : Specification for Rolled Zinc
  • ASTM B0070-90R01 : Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
  • ASTM B0075-02 : Specification for Seamless Copper Tube
  • ASTM B0075M-99 : Specification for Seamless Copper Tube [Metric]
  • ASTM B0076-90R01 : Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
  • ASTM B0077-81R01 : Test Method for Thermoelectric Power of Electrical-Resistance Alloys
  • ASTM B0078-90R01 : Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
  • ASTM B0080-01E01 : Specification for Magnesium-Alloy Sand Castings
  • ASTM B0084-90R01 : Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
  • ASTM B0085-03 : Specification for Aluminum-Alloy Die Castings
  • ASTM B0086-04E01 : Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
  • ASTM B0088-03 : Specification for Seamless Copper Water Tube
  • ASTM B0088M-03 : Specification for Seamless Copper Water Tube [Metric]
  • ASTM B0090/B0090M-98R05 : Specification for Magnesium-Alloy Sheet and Plate
  • ASTM B0091-97R04 : Specification for Magnesium-Alloy Forgings
  • ASTM B0092/B0092M-01 : Specification for Unalloyed Magnesium Ingot and Stick For Remelting
  • ASTM B0093/B0093M-04 : Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
  • ASTM B0094-05 : Specification for Magnesium-Alloy Die Castings
  • ASTM B0096/B0096M-01 : Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
  • ASTM B0098/B0098M-03 : Specification for Copper-Silicon Alloy Rod, Bar and Shapes
  • ASTM B0099/B0099M-01 : Specification for Copper-Silicon Alloy Wire for General Applications
  • ASTM B0100-03A : Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
  • ASTM B0101-02 : Specification for Lead-Coated Copper Sheet and Strip for Building Construction
  • ASTM B0102-00 : Specification for Lead- and Tin-Alloy Die Castings
  • ASTM B0103/B0103M-04 : Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
  • ASTM B0105-00 : Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
  • ASTM B0106-96R02E01 : Test Methods for Flexivity of Thermostat Metals
  • ASTM B0107/B0107M-00 : Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
  • ASTM B0108-03A : Specification for Aluminum-Alloy Permanent Mold Castings
  • ASTM B0111/B0111M-04 : Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
  • ASTM B0111M : Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock [Metric]
  • ASTM B0114-90R01 : Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
  • ASTM B0115-00R04 : Specification for Electrolytic Copper Cathode
  • ASTM B0116-95R01 : Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
  • ASTM B0117-03 : Practice for Operating Salt Spray (Fog) Apparatus
  • ASTM B0121/B0121M-01 : Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
  • ASTM B0122/B0122M-01 : Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B0124/B0124M-04 : Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
  • ASTM B0127-98 : Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
  • ASTM B0129-02 : Specification for Cartridge Brass Cartridge Case Cups
  • ASTM B0130-02 : Specification for Commercial Bronze Strip for Bullet Jackets
  • ASTM B0131-02 : Specification for Copper Alloy Bullet Jacket Cups
  • ASTM B0134/B0134M-01 : Specification for Brass Wire
  • ASTM B0135-02 : Specification for Seamless Brass Tube
  • ASTM B0135M-00E01 : Specification for Seamless Brass Tube [Metric]
  • ASTM B0136-84R03 : Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
  • ASTM B0137-95R04 : Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
  • ASTM B0138/B0138M-01 : Specification for Manganese Bronze Rod, Bar, and Shapes
  • ASTM B0139/B0139M-01 : Specification for Phosphor Bronze Rod, Bar, and Shapes
  • ASTM B0140/B0140M-01 : Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
  • ASTM B0148-97R03E01 : Specification for Aluminum-Bronze Sand Castings
  • ASTM B0150/B0150M-03 : Specification for Aluminum Bronze Rod, Bar, and Shapes
  • ASTM B0150M : Specification for Aluminum Bronze, Rod, Bar, and Shapes [Metric]
  • ASTM B0151/B0151M-00 : Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
  • ASTM B0152/B0152M-00 : Specification for Copper Sheet, Strip, Plate, and Rolled Bar
  • ASTM B0153-91R03E01 : Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
  • ASTM B0154-01 : Test Method for Mercurous Nitrate Test for Copper and Copper Alloys
  • ASTM B0159/B0159M-01 : Specification for Phosphor Bronze Wire
  • ASTM B0160-99 : Specification for Nickel Rod and Bar
  • ASTM B0161-03 : Specification for Nickel Seamless Pipe and Tube
  • ASTM B0162-99 : Specification for Nickel Plate, Sheet, and Strip
  • ASTM B0163-04 : Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
  • ASTM B0164-03 : Specification for Nickel-Copper Alloy Rod, Bar, and Wire
  • ASTM B0165-93R03E01 : Specification of Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
  • ASTM B0166-04 : Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
  • ASTM B0167-01 : Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
  • ASTM B0168-01 : Specification Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
  • ASTM B0169/B0169M-01 : Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
  • ASTM B0170-99R04 : Specification for Oxygen-Free Electrolytic Copper\MRefinery Shapes
  • ASTM B0171/B0171M-04E01 : Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
  • ASTM B0172-01A : Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
  • ASTM B0173-01A : Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
  • ASTM B0174-02 : Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
  • ASTM B0176-04 : Specification for Copper-Alloy Die Castings
  • ASTM B0177-01 : Guide for Engineering Chromium Electroplating
  • ASTM B0179-03 : Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
  • ASTM B0183-79R04E01 : Practice for Preparation of Low-Carbon Steel for Electroplating
  • ASTM B0187/B0187M-03 : Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
  • ASTM B0187M : Specification for Copper Bar, Bus Bar, Rod and Shapes [Metric]
  • ASTM B0188-02 : Specification for Seamless Copper Bus Pipe and Tube
  • ASTM B0189 : Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
  • ASTM B0193-02 : Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B0194-01E01 : Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B0196/B0196M-03 : Specification for Copper-Beryllium Alloy Rod and Bar
  • ASTM B0197/B0197M-01 : Specification for Copper-Beryllium Alloy Wire
  • ASTM B0199-99R05 : Specification for Magnesium-Alloy Permanent Mold Castings
  • ASTM B0200-85R04 : Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
  • ASTM B0201-80R04 : Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
  • ASTM B0206/B0206M-97R02 : Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
  • ASTM B0208-04 : Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
  • ASTM B0209-04 : Specification for Aluminum and Aluminum-Alloy Sheet and Plate
  • ASTM B0209M-04 : Specification for Aluminum and Aluminum-Alloy Sheet and Plate \[Metric\]
  • ASTM B0210-04 : Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
  • ASTM B0210M-05 : Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes \[Metric\]
  • ASTM B0211-03 : Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
  • ASTM B0211M-03 : Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire \[Metric\]
  • ASTM B0212-99 : Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
  • ASTM B0213-03 : Test Method for Flow Rate of Metal Powders
  • ASTM B0214-99 : Test Method for Sieve Analysis of Metal Powders
  • ASTM B0215-04 : Practices for Sampling Metal Powders
  • ASTM B0216-97R03 : Specification for Tough-Pitch Fire-Refined Copper\MRefinery Shapes
  • ASTM B0221-05 : Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
  • ASTM B0221M-05 : Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes \[Metric\]
  • ASTM B0223-03 : Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • ASTM B0224-04 : Classification of Coppers
  • ASTM B0226-04 : Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
  • ASTM B0227-04 : Specification for Hard-Drawn Copper-Clad Steel Wire
  • ASTM B0228-04 : Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
  • ASTM B0229-04 : Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
  • ASTM B0230/B0230M-99R04 : Specification for Aluminum 1350\NH19 Wire for Electrical Purposes
  • ASTM B0231/B0231M-04 : Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
  • ASTM B0232/B0232M-01E01 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
  • ASTM B0233-97R03E01 : Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
  • ASTM B0234-04 : Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
  • ASTM B0234M-04 : Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers \[Metric\]
  • ASTM B0236-00 : Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
  • ASTM B0236M-00 : Specification for Aluminum Bars for Electrical Purposes (Bus Bars) \[Metric\]
  • ASTM B0237-01 : Specification for Refined Antimony
  • ASTM B0240-04 : Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
  • ASTM B0241/B0241M-02 : Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
  • ASTM B0242-99R04E01 : Guide for Preparation of High-Carbon Steel for Electroplating
  • ASTM B0243-05 : Terminology of Powder Metallurgy
  • ASTM B0244-97R02 : Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
  • ASTM B0246-00 : Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
  • ASTM B0247-02A : Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
  • ASTM B0247M-02A : Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings \[Metric\]
  • ASTM B0248-01E01 : Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B0248M-01E01 : Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric]
  • ASTM B0249/B0249M-04 : Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
  • ASTM B0250/B0250M-01 : Specification for General Requirements for Wrought Copper Alloy Wire
  • ASTM B0251-02E01 : Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
  • ASTM B0251M-97R03 : Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
  • ASTM B0252-92R04 : Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
  • ASTM B0253-87R99E01 : Guide for Preparation of Aluminum Alloys for Electroplating
  • ASTM B0254-92R04E01 : Practice for Preparation of and Electroplating on Stainless Steel
  • ASTM B0258-02 : Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  • ASTM B0263-04 : Test Method for Determination of Cross-Sectional Area of Stranded Conductors
  • ASTM B0265-05 : Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
  • ASTM B0267-90R01 : Specification for Wire for Use In Wire-Wound Resistors
  • ASTM B0271-96R03 : Specification for Copper-Base Alloy Centrifugal Castings
  • ASTM B0272-02 : Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
  • ASTM B0275-04 : Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
  • ASTM B0276-91R00 : Test Method for Apparent Porosity in Cemented Carbides
  • ASTM B0277-95R01 : Test Method for Hardness of Electrical Contact Materials
  • ASTM B0279-04 : Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
  • ASTM B0280-03 : Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
  • ASTM B0281-88R01 : Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
  • ASTM B0283-04 : Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
  • ASTM B0286-02 : Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
  • ASTM B0294-92R01 : Test Method for Hardness Testing of Cemented Carbides
  • ASTM B0296-03 : Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
  • ASTM B0298-99E01 : Specification for Silver-Coated Soft or Annealed Copper Wire
  • ASTM B0299-01 : Specification for Titanium Sponge
  • ASTM B0301/B0301M-04 : Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
  • ASTM B0302-02 : Specification for Threadless Copper Pipe, Standard Sizes
  • ASTM B0306-02 : Specification for Copper Drainage Tube (DWV)
  • ASTM B0308/B0308M-02 : Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
  • ASTM B0311-93R02E01 : Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity
  • ASTM B0312-96R02 : Test Method for Green Strength for Compacted Metal Powder Specimens
  • ASTM B0313/B0313M-02E01 : Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
  • ASTM B0315-99 : Specification for Seamless Copper Alloy Pipe and Tube
  • ASTM B0316/B0316M-02 : Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
  • ASTM B0317/B0317M-04 : Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles for Electrical Purposes (Bus Conductor)
  • ASTM B0319-91R04 : Guide for Preparation of Lead and Lead Alloys for Electroplating
  • ASTM B0320-60R03E01 : Practice for Preparation of Iron Castings for Electroplating
  • ASTM B0322-99R04 : Guide for Cleaning Metals Prior to Electroplating
  • ASTM B0324-01 : Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
  • ASTM B0327-01E02 : Specification for Master Alloys Used in Making Zinc Die Casting Alloys
  • ASTM B0328-96R03 : Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
  • ASTM B0329-98R03E01 : Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
  • ASTM B0330-02 : Test Method for Fisher Number of Metal Powders and Related Compounds
  • ASTM B0331-95R02 : Test Method for Compressibility of Metal Powders in Uniaxial Compaction
  • ASTM B0333-03 : Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
  • ASTM B0335-03 : Specification for Nickel-Molybdenum Alloy Rod
  • ASTM B0338-05A : Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
  • ASTM B0339-00 : Specification for Pig Tin
  • ASTM B0341/B0341M-02 : Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ)
  • ASTM B0343-92AR04E01 : Practice for Preparation of Nickel for Electroplating with Nickel
  • ASTM B0344-01 : Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
  • ASTM B0345/B0345M-02 : Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
  • ASTM B0348-05 : Specification for Titanium and Titanium Alloy Bars and Billets
  • ASTM B0349/B0349M-03 : Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
  • ASTM B0350/B0350M-02 : Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
  • ASTM B0351/B0351M-02 : Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
  • ASTM B0352/B0352M-02 : Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
  • ASTM B0353-02 : Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
  • ASTM B0354-98 : Terminology Relating to Uninsulated Metallic Electrical Conductors
  • ASTM B0355-95R03 : Specification for Nickel-Coated Soft or Annealed Copper Wire
  • ASTM B0359/B0359M-02 : Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
  • ASTM B0359M : Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins [Metric]
  • ASTM B0360-01 : Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
  • ASTM B0361-02 : Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
  • ASTM B0362-91R03 : Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
  • ASTM B0363-04 : Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
  • ASTM B0364-96R02 : Specification for Tantalum and Tantalum Alloy Ingots
  • ASTM B0365-98R04 : Specification for Tantalum and Tantalum Alloy Rod and Wire
  • ASTM B0366-04B : Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
  • ASTM B0367-93R04 : Specification for Titanium and Titanium Alloy Castings
  • ASTM B0368-97R03E01 : Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
  • ASTM B0369-96R03 : Specification for Copper-Nickel Alloy Castings
  • ASTM B0370-03 : Specification for Copper Sheet and Strip for Building Construction
  • ASTM B0371/B0371M-02 : Specification for Copper-Zinc-Silicon Alloy Rod
  • ASTM B0372-97R03 : Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
  • ASTM B0373-00 : Specification for Aluminum Foil for Capacitors
  • ASTM B0374-96R03 : Terminology Relating to Electroplating
  • ASTM B0379-04 : Specification for Phosphorized Coppers\MRefinery Shapes
  • ASTM B0380-97R02 : Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
  • ASTM B0381-05 : Specification for Titanium and Titanium Alloy Forgings
  • ASTM B0386-03 : Specification for Molybdenum and Molybdenum Alloy Plate,Sheet, Strip, and Foil
  • ASTM B0387-90R01 : Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
  • ASTM B0388-00 : Specification for Thermostat Metal Sheet and Strip
  • ASTM B0389-81R04 : Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
  • ASTM B0390-92R00 : Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
  • ASTM B0391-03 : Specification for Niobium and Niobium Alloy Ingots
  • ASTM B0392-03 : Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
  • ASTM B0393-03 : Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
  • ASTM B0394-03 : Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
  • ASTM B0395/B0395M-02 : Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
  • ASTM B0395M : Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes [Metric]
  • ASTM B0396 : Specification for Aluminum-Alloy 5005-H19 Wire for Electrical Purposes
  • ASTM B0397 : Specification for Concentric-Lay-Stranded Aluminum-Alloy 5005-H19 Conductors
  • ASTM B0398/B0398M-02 : Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
  • ASTM B0399/B0399M-04 : Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
  • ASTM B0400-04 : Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
  • ASTM B0401-04 : Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
  • ASTM B0403-02 : Specification for Magnesium-Alloy Investment Castings
  • ASTM B0404/B0404M-02 : Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins
  • ASTM B0406-96R00 : Test Method for Transverse Rupture Strength of Cemented Carbides
  • ASTM B0407-04 : Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
  • ASTM B0408-01 : Specification for Nickel-Iron-Chromium Alloy Rod and Bar
  • ASTM B0409-01 : Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
  • ASTM B0411/B0411M-01 : Specification for Copper-Nickel-Silicon Alloy Rod and Bar
  • ASTM B0413-97AR03 : Specification for Refined Silver
  • ASTM B0415-98R02 : Specification for Hard-Drawn Aluminum-Clad Steel Wire
  • ASTM B0416-98R02 : Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
  • ASTM B0417-00 : Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
  • ASTM B0418-01 : Specification for Cast and Wrought Galvanic Zinc Anodes
  • ASTM B0422-04 : Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
  • ASTM B0423-03 : Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
  • ASTM B0424-98A : Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
  • ASTM B0425-99 : Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Rod and Bar
  • ASTM B0427-02 : Specification for Gear Bronze Alloy Castings
  • ASTM B0428-93R04 : Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
  • ASTM B0429-02 : Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
  • ASTM B0430-97R01 : Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
  • ASTM B0432-04 : Specification for Copper and Copper Alloy Clad Steel Plate
  • ASTM B0434-00 : Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
  • ASTM B0435-03 : Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
  • ASTM B0438/B0438M-04 : Specification for Sintered Bronze Bearings (Oil-Impregnated)
  • ASTM B0439-00E01 : Specification for Iron-Base Sintered Bearings (Oil-Impregnated)
  • ASTM B0440-00 : Specification for Cadmium
  • ASTM B0441-04 : Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
  • ASTM B0443-00E01 : Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNSN06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
  • ASTM B0444-04 : Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
  • ASTM B0446-03 : Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
  • ASTM B0447-02 : Specification for Welded Copper Tube
  • ASTM B0449-93R04 : Specification for Chromates on Aluminum
  • ASTM B0452-02 : Specification for Copper-Clad Steel Wire for Electronic Application
  • ASTM B0453/B0453M-01 : Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
  • ASTM B0455-01 : Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
  • ASTM B0456-03 : Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
  • ASTM B0457-67R03 : Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
  • ASTM B0462-04 : Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675,
  • ASTM B0463-04 : Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
  • ASTM B0464-04 : Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
  • ASTM B0465-04 : Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B0466/B0466M-03 : Specification for Seamless Copper-Nickel Pipe and Tube
  • ASTM B0467-88R03 : Specification for Welded Copper-Nickel Pipe
  • ASTM B0468-04 : Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
  • ASTM B0470-02 : Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
  • ASTM B0472-04A : Specification for Nickel Alloy Billets and Bars for Reforging
  • ASTM B0473-96R02E01 : Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
  • ASTM B0474-03 : Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
  • ASTM B0475-96R02E01 : Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
  • ASTM B0476-01 : Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
  • ASTM B0477-97R02 : Specification for Gold-Silver-Nickel Electrical Contact Alloy
  • ASTM B0478-85R03 : Test Method for Cross Curvature of Thermostat Metals
  • ASTM B0479-00 : Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
  • ASTM B0480-88R01 : Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
  • ASTM B0481-68R03E01 : Practice for Preparation of Titanium and Titanium Alloys for Electroplating
  • ASTM B0482-85R03 : Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
  • ASTM B0483/B0483M-03 : Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications
  • ASTM B0487-85R02 : Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
  • ASTM B0488-01 : Specification for Electrodeposited Coatings of Gold for Engineering Uses
  • ASTM B0489-85R03 : Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
  • ASTM B0490-92R03 : Practice for Micrometer Bend Test for Ductility of Electrodeposits
  • ASTM B0491/B0491M-00 : Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
  • ASTM B0493-01R03 : Specification for Zirconium and Zirconium Alloy Forgings
  • ASTM B0494/B0494M-03 : Specification for Primary Zirconium
  • ASTM B0495-01 : Specification for Zirconium and Zirconium Alloy Ingots
  • ASTM B0496-04 : Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
  • ASTM B0497-00 : Guide for Measuring Voltage Drop on Closed Arcing Contacts
  • ASTM B0498/B0498M-98R02 : Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
  • ASTM B0499-96R02 : Test Method for Measurement of Coating Thicknesses by the Magnetic Method : Nonmagnetic Coatings on Magnetic Basis Metals
  • ASTM B0500/B0500M-98R02 : Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)
  • ASTM B0501-04 : Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
  • ASTM B0502-02 : Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced
  • ASTM B0504-90R02 : Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
  • ASTM B0505/B0505M-04 : Specification for Copper Alloy Continuous Castings
  • ASTM B0507-86R03 : Practice for Design of Articles to Be Electroplated on Racks
  • ASTM B0508-97R03 : Specification for Copper Alloy Strip for Flexible Metal Hose
  • ASTM B0511-01 : Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
  • ASTM B0512-04 : Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
  • ASTM B0514-95R02E01 : Specification for Welded Nickel-Iron-Chromium Alloy Pipe
  • ASTM B0515-95R02 : Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
  • ASTM B0516-03 : Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Tubes
  • ASTM B0517-03 : Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
  • ASTM B0520-93R02E01 : Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
  • ASTM B0521-98R04 : Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
  • ASTM B0522-01 : Specification for Gold-Silver-Platinum Electrical Contact Alloy
  • ASTM B0523/B0523M-02 : Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
  • ASTM B0524/B0524M-99 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
  • ASTM B0527-93R00E01 : Test Method for Determination of Tap Density of Metallic Powders and Compounds
  • ASTM B0528-99 : Test Method for Transverse Rupture Strength of Metal Powder Specimens
  • ASTM B0530-02 : Test Method for Measurement of Coating Thicknesses by the Magnetic Method : Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
  • ASTM B0531 : Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes
  • ASTM B0532-85R02 : Specification for Appearance of Electroplated Plastic Surfaces
  • ASTM B0533-85R04 : Test Method for Peel Strength of Metal Electroplated Plastics
  • ASTM B0534-01 : Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B0535-04 : Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
  • ASTM B0536-02 : Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
  • ASTM B0537-70R02 : Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
  • ASTM B0539-02E01 : Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
  • ASTM B0540-97R02 : Specification for Palladium Electrical Contact Alloy
  • ASTM B0541-01 : Specification for Gold Electrical Contact Alloy
  • ASTM B0542-04 : Terminology Relating to Electrical Contacts and Their Use
  • ASTM B0543-96R03 : Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
  • ASTM B0545-97R04E01 : Specification for Electrodeposited Coatings of Tin
  • ASTM B0546-04 : Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS
  • ASTM B0547/B0547M-02 : Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
  • ASTM B0548-03 : Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
  • ASTM B0549-04 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)
  • ASTM B0550/B0550M-02 : Specification for Zirconium and Zirconium Alloy Bar and Wire
  • ASTM B0551/B0551M-04 : Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
  • ASTM B0552-98R04 : Specification for Seamless and Welded Copper\NNickel Tubes for Water Desalting Plants
  • ASTM B0555-86R02 : Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test
  • ASTM B0556-90R02 : Guide for Measurement of Thin Chromium Coatings by Spot Test
  • ASTM B0557-02A : Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
  • ASTM B0557M-02A : Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products \[Metric\]
  • ASTM B0558-79R03 : Practice for Preparation of Nickel Alloys for Electroplating
  • ASTM B0559-93R02E01 : Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
  • ASTM B0560-00 : Specification for Modern Pewter Alloys
  • ASTM B0561-94R99E01 : Specification for Refined Platinum
  • ASTM B0562-95R99 : Specification for Refined Gold
  • ASTM B0563-01 : Specification for Palladium-Silver-Copper Electrical Contact Alloy
  • ASTM B0564-04 : Specification for Nickel Alloy Forgings
  • ASTM B0565-04 : Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
  • ASTM B0566-04A : Specification for Copper-Clad Aluminum Wire
  • ASTM B0567-98R03 : Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
  • ASTM B0568-98R04 : Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
  • ASTM B0569-04 : Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
  • ASTM B0570-01 : Specification for Copper-Beryllium Alloy (UNS No. C17000 and C17200) Forgings and Extrusions
  • ASTM B0571-97R03 : Practice for Qualitative Adhesion Testing of Metallic Coatings
  • ASTM B0572-03 : Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
  • ASTM B0573-00 : Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
  • ASTM B0574-05 : Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-
  • ASTM B0575-04 : Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-
  • ASTM B0576-94R99 : Guide for Arc Erosion Testing of Electrical Contact Materials
  • ASTM B0577-93R04E01 : Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • ASTM B0578-87R04 : Test Method for Microhardness of Electroplated Coatings
  • ASTM B0579-73R04 : Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
  • ASTM B0580-79R04 : Specification for Anodic Oxide Coatings on Aluminum
  • ASTM B0581-02 : Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
  • ASTM B0582-02 : Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
  • ASTM B0584-04 : Specification for Copper Alloy Sand Castings for General Applications
  • ASTM B0587-97R03 : Specification for Welded Brass Tube
  • ASTM B0588-88R01 : Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
  • ASTM B0589-94R99E01 : Specification for Refined Palladium
  • ASTM B0591-04 : Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
  • ASTM B0592-01 : Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B0593-96R03E01 : Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
  • ASTM B0594-02 : Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
  • ASTM B0595-95R00 : Specification for Sintered Aluminum Structural Parts
  • ASTM B0596-89R99 : Specification for Gold-Copper Alloy Electrical Contact Material
  • ASTM B0597 : Practice for Heat Treatment of Aluminum Alloys
  • ASTM B0598-98R04 : Practice for Determining Offset Yield Strength in Tension for Copper Alloys
  • ASTM B0599-92R03E01 : Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
  • ASTM B0600-91R02 : Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
  • ASTM B0601-02 : Classification for Temper Designations for Copper and Copper Alloys\MWrought and Cast
  • ASTM B0602-88R99 : Test Method for Attribute Sampling of Metallic and Inorganic Coatings
  • ASTM B0603-90R01 : Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
  • ASTM B0604-91R03E01 : Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
  • ASTM B0605-95AR04 : Specification for Electrodeposited Coatings of Tin-Nickel Alloy
  • ASTM B0606-02 : Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
  • ASTM B0607-91R03 : Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
  • ASTM B0608-02 : Specification for Welded Copper-Alloy Pipe
  • ASTM B0609/B0609M-99R04 : Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
  • ASTM B0610-00E01 : Test Method for Measuring Dimensional Changes of Metal Powder Specimens
  • ASTM B0611-85R00E01 : Test Method for Abrasive Wear Resistance of Cemented Carbides
  • ASTM B0612-00 : Specification for Iron Bronze Sintered Bearings (Oil-Impregnated)
  • ASTM B0613-76R00 : Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
  • ASTM B0614-95R00 : Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
  • ASTM B0615-79R00 : Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
  • ASTM B0616-96R00 : Specification for Refined Rhodium
  • ASTM B0617-98R04 : Specification for Coin Silver Electrical Contact Alloy
  • ASTM B0618-03 : Specification for Aluminum-Alloy Investment Castings
  • ASTM B0619-05 : Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
  • ASTM B0620-03 : Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
  • ASTM B0621-02 : Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
  • ASTM B0622-04A : Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
  • ASTM B0624-99 : Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
  • ASTM B0625-04A : Specification for UNS N08904, UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip
  • ASTM B0626-04 : Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
  • ASTM B0628-98R04 : Specification for Silver-Copper Eutectic Electrical Contact Alloy
  • ASTM B0629-77R03 : Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
  • ASTM B0630-88R01 : Practice for Preparation of Chromium for Electroplating with Chromium
  • ASTM B0631-93R04 : Specification for Silver-Tungsten Electrical Contact Materials
  • ASTM B0632/B0632M-02 : Specification for Aluminum-Alloy Rolled Tread Plate
  • ASTM B0633-98E01 : Specification for Electrodeposited Coatings of Zinc on Iron and Steel
  • ASTM B0634-88R04E01 : Specification for Electrodeposited Coatings of Rhodium for Engineering Use
  • ASTM B0635-00R04E01 : Specification for Coatings of Cadmium-Tin Mechanically Deposited
  • ASTM B0636-84R01 : Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
  • ASTM B0637-03 : Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
  • ASTM B0639-02 : Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
  • ASTM B0640-00 : Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
  • ASTM B0643-00E01 : Specification for Copper-Beryllium Alloy Seamless Tube
  • ASTM B0644-95R03 : Specification for Copper Alloy Addition Agents
  • ASTM B0645-02 : Practice for Plane\NStrain Fracture Toughness Testing of Aluminum Alloys
  • ASTM B0646-04 : Practice for Fracture Toughness Testing of Aluminum Alloys
  • ASTM B0647-84R00 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
  • ASTM B0648-78R00 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
  • ASTM B0649-04 : Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033)
  • ASTM B0650-95R02 : Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
  • ASTM B0651-83R01 : Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
  • ASTM B0652/B0652M-04 : Specification for Niobium-Hafnium Alloy Ingots
  • ASTM B0653/B0653M-02 : Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
  • ASTM B0654/B0654M-04 : Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
  • ASTM B0655/B0655M-04 : Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
  • ASTM B0657-92R00 : Test Method for Metallographic Determination of Microstructure in Cemented Tungsten Carbides
  • ASTM B0658/B0658M-02 : Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
  • ASTM B0659-90R03 : Guide for Measuring Thickness of Metallic and Inorganic Coatings
  • ASTM B0660-02 : Practices for Packaging/Packing of Aluminum and Magnesium Products
  • ASTM B0661-03 : Practice for Heat Treatment of Magnesium Alloys
  • ASTM B0662-94R00 : Specification for Silver-Molybdenum Electrical Contact Material
  • ASTM B0663-94R00 : Specification for Silver-Tungsten Carbide Electrical Contact Material
  • ASTM B0664-90R00 : Specification for 80 \% Silver-20 \% Graphite Sliding Contact Material
  • ASTM B0665-03 : Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
  • ASTM B0666/B0666M-01 : Practice for Identification Marking of Aluminum and Magnesium Products
  • ASTM B0667-97R03E01 : Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
  • ASTM B0668-00 : Specification for UNS N08028 Seamless Pipe and Tube
  • ASTM B0670-02 : Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
  • ASTM B0671-81R99E01 : Specification for Refined Iridium
  • ASTM B0672-02 : Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
  • ASTM B0673-04 : Specification for UNS N08904, UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
  • ASTM B0674-04 : Specification for UNS N08904, UNS N08925, UNS N08354, and UNS N08926 Welded Tube
  • ASTM B0675-02 : Specification for UNS N08367 Welded Pipe
  • ASTM B0676-03 : Specification for UNS N08367 Welded Tube
  • ASTM B0677-04A : Specification for UNS N08904, UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
  • ASTM B0678-86R01 : Test Method for Solderability of Metallic-Coated Products
  • ASTM B0679-98R04E01 : Specification for Electrodeposited Coatings of Palladium for Engineering Use
  • ASTM B0680-80R04 : Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • ASTM B0682-01 : Specification for Standard Metric Sizes of Electrical Conductors
  • ASTM B0683-01 : Specification for Pure Palladium Electrical Contact Material
  • ASTM B0684-97R02 : Specification for Platinum-Iridium Electrical Contact Materials
  • ASTM B0685-01 : Specification for Palladium-Copper Electrical Contact Material
  • ASTM B0686-03 : Specification for Aluminum Alloy Castings, High-Strength
  • ASTM B0687-99 : Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
  • ASTM B0688-96R04 : Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
  • ASTM B0689-97R03 : Specification for Electroplated Engineering Nickel Coatings
  • ASTM B0690-02 : Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
  • ASTM B0691-02 : Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
  • ASTM B0692-90R00 : Specification for 75 \% Silver-25 \% Graphite Sliding Contact Material
  • ASTM B0693-91R01 : Specification for Silver-Nickel Electrical Contact Materials
  • ASTM B0694-03 : Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
  • ASTM B0695-04 : Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
  • ASTM B0696-00R04E01 : Specification for Coatings of Cadmium Mechanically Deposited
  • ASTM B0697-88R99 : Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
  • ASTM B0698-02 : Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
  • ASTM B0699-86R03 : Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
  • ASTM B0700-97R02 : Specification for Electrodeposited Coatings of Silver for Engineering Use
  • ASTM B0701/B0701M-00 : Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
  • ASTM B0702-93R04 : Specification for Copper-Tungsten Electrical Contact Material
  • ASTM B0703-94R99E01 : Test Method for Apparent Density of Powders Using Arnold Meter
  • ASTM B0704-03 : Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
  • ASTM B0705-03 : Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
  • ASTM B0706-00 : Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
  • ASTM B0708-01 : Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
  • ASTM B0709-04 : Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
  • ASTM B0710-04 : Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
  • ASTM B0711-99 : Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
  • ASTM B0712-93R99 : Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
  • ASTM B0715-96R01 : Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
  • ASTM B0717-96R00 : Specification for Refined Ruthenium
  • ASTM B0718-00 : Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
  • ASTM B0719-00 : Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
  • ASTM B0721 : Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts
  • ASTM B0722-02 : Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
  • ASTM B0723-00 : Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
  • ASTM B0724-00 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
  • ASTM B0725-93R03E01 : Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
  • ASTM B0726-02 : Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
  • ASTM B0727-04 : Practice for Preparation of Plastics Materials for Electroplating
  • ASTM B0729-00 : Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
  • ASTM B0730 : Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
  • ASTM B0731-96R01 : Specification for 60 \% Palladium-40 \% Silver Electrical Contact Material
  • ASTM B0733-04 : Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
  • ASTM B0734-97R03E01 : Specification for Electrodeposited Copper for Engineering Uses
  • ASTM B0735-95R00 : Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
  • ASTM B0736-00 : Specification for Aluminum, Aluminum Alloy, and Aluminum-Clad Steel Cable Shielding Stock
  • ASTM B0737-01 : Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
  • ASTM B0738-03 : Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
  • ASTM B0739-03 : Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
  • ASTM B0740-02 : Specification for Copper-Nickel-Tin Spinodal Alloy Strip
  • ASTM B0741-95R00 : Test Method for Porosity In Gold Coatings On Metal Substrates By Paper Electrography
  • ASTM B0742-90R00 : Specification for Fine Silver Electrical Contact Fabricated Material
  • ASTM B0743-00 : Specification for Seamless Copper Tube in Coils
  • ASTM B0744/B0744M-05 : Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
  • ASTM B0745/B0745M-97 : Specification for Corrugated Aluminum Pipe for Sewers and Drains
  • ASTM B0746/B0746M-02 : Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
  • ASTM B0747-02 : Specification for Copper-Zirconium Alloy Sheet and Strip
  • ASTM B0748-90R01 : Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
  • ASTM B0749-03 : Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
  • ASTM B0750-03 : Specification for GALFAN (Zinc-5 \% Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
  • ASTM B0751-03 : Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
  • ASTM B0752-01 : Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
  • ASTM B0753-01 : Specification for Thermostat Component Alloys
  • ASTM B0754-89R99E01 : Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
  • ASTM B0755-00 : Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
  • ASTM B0756-00 : Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
  • ASTM B0757-00 : Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
  • ASTM B0758-00 : Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
  • ASTM B0759-00 : Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
  • ASTM B0760-86R99 : Specification for Tungsten Plate, Sheet, and Foil
  • ASTM B0761-02E01 : Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
  • ASTM B0762-90R99 : Test Method of Variables Sampling of Metallic and Inorganic Coatings
  • ASTM B0763-04 : Specification for Copper Alloy Sand Castings for Valve Applications
  • ASTM B0764-04 : Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
  • ASTM B0765-03 : Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
  • ASTM B0766-86R03 : Specification for Electrodeposited Coatings of Cadmium
  • ASTM B0767-88R01 : Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
  • ASTM B0768-99R04 : Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
  • ASTM B0769-94R00 : Test Method for Shear Testing of Aluminum Alloys
  • ASTM B0770-02 : Specification for Copper-Beryllium Alloy Sand Castings for General Applications
  • ASTM B0771-87R01 : Test Method for Short Rod Fracture Toughness of Cemented Carbides
  • ASTM B0772-97R03 : Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
  • ASTM B0773-96R02E01 : Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
  • ASTM B0774-00 : Specification for Low Melting Point Alloys
  • ASTM B0775-02 : Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
  • ASTM B0776-01A : Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
  • ASTM B0777-99 : Specification for Tungsten Base, High-Density Metal
  • ASTM B0778-02 : Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
  • ASTM B0779-03 : Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
  • ASTM B0780-98R04 : Specification for 75 \% Silver, 24.5 \% Copper, 0.5 \% Nickel Electrical Contact Alloy
  • ASTM B0781-93AR99 : Guide for Silver-Cadmium Oxide Contact Material
  • ASTM B0782-00 : Specification for Iron Graphite Sintered Bearings (Oil-Impregnated)
  • ASTM B0783-04 : Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
  • ASTM B0784-01 : Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
  • ASTM B0786-02A : Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
  • ASTM B0787/B0787M-04 : Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
  • ASTM B0788/B0788M-04 : Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
  • ASTM B0789/B0789M-99R05 : Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
  • ASTM B0790/B0790M-00 : Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
  • ASTM B0792-01E01 : Specification for Zinc Alloys in Ingot Form for Slush Casting
  • ASTM B0793-03 : Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
  • ASTM B0794-97R03 : Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
  • ASTM B0795-93R02E01 : Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (P/F) Steel Parts
  • ASTM B0796-02 : Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (P/F) Applications
  • ASTM B0797-93R02E01 : Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
  • ASTM B0798-95R00 : Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
  • ASTM B0799-95R00 : Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
  • ASTM B0800-00 : Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes\MAnnealed and Intermediate Tempers
  • ASTM B0801-99 : Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
  • ASTM B0802/B0802M-02 : Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
  • ASTM B0803-02 : Specification for High-Strength Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
  • ASTM B0804-02 : Specification for UNS N08367 and UNS N08926 Welded Pipe
  • ASTM B0805-02 : Specification for Precipitation Hardening Nickel Alloys UNS N07716, N07725, N07773, N07776, and N09777, Bar and Wire
  • ASTM B0806-04 : Specification for Copper Alloy Permanent Mold Castings for General Applications
  • ASTM B0807-02 : Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
  • ASTM B0808-97R03 : Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
  • ASTM B0809-95R03 : Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (|P`Flowers-of-Sulfur|P’)
  • ASTM B0810-01A : Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
  • ASTM B0811-02 : Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
  • ASTM B0812-96R02E01 : Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
  • ASTM B0813-00E01 : Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
  • ASTM B0814-02 : Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
  • ASTM B0815-02 : Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
  • ASTM B0816-00R04E01 : Specification for Coatings of Cadmium-Zinc Mechanically Deposited
  • ASTM B0817-03 : Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
  • ASTM B0818-03 : Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
  • ASTM B0819-00 : Specification for Seamless Copper Tube for Medical Gas Systems
  • ASTM B0820-04E01 : Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
  • ASTM B0821-02 : Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
  • ASTM B0822-02 : Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
  • ASTM B0823-01 : Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts
  • ASTM B0824-04 : Specification for General Requirements for Copper Alloy Castings
  • ASTM B0825-02 : Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
  • ASTM B0826-03 : Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
  • ASTM B0827-97R03 : Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
  • ASTM B0828-02 : Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
  • ASTM B0829-04A : Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
  • ASTM B0830-97R03 : Specification for Uniform Test Methods and Frequency
  • ASTM B0831-05 : Test Method for Shear Testing of Thin Aluminum Alloy Products
  • ASTM B0832-93R03 : Guide for Electroforming with Nickel and Copper
  • ASTM B0833-01A : Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing)
  • ASTM B0834-95R03 : Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves,
  • ASTM B0835-04 : Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
  • ASTM B0836-00 : Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
  • ASTM B0837-01 : Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems
  • ASTM B0839-04 : Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod\MInclined Wedge Method
  • ASTM B0840-99R04 : Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits
  • ASTM B0841-99R04 : Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits
  • ASTM B0842-99 : Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits
  • ASTM B0843-93R03 : Specification for Magnesium Alloy Anodes for Cathodic Protection
  • ASTM B0844-98R04 : Guide for Silver-Tin Oxide Contact Material
  • ASTM B0845-97R03 : Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
  • ASTM B0846-01E01 : Terminology for Copper and Copper Alloys
  • ASTM B0848-01 : Specification for Powder Forged (P/F) Ferrous Structural Parts
  • ASTM B0849-02 : Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
  • ASTM B0850-98R04 : Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
  • ASTM B0851-04 : Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
  • ASTM B0852-01 : Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
  • ASTM B0853-02 : Specification for Powder Metallurgy (P/M) Boron Stainless Steel Structural Components
  • ASTM B0854-98R04 : Guide for Measuring Electrical Contact Intermittences
  • ASTM B0855-94R99E01 : Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
  • ASTM B0856-03 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
  • ASTM B0857-02 : Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
  • ASTM B0858-01 : Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
  • ASTM B0859-03 : Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
  • ASTM B0860-02 : Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
  • ASTM B0861-05 : Specification for Titanium and Titanium Alloy Seamless Pipe
  • ASTM B0862-05 : Specification for Titanium and Titanium Alloy Welded Pipe
  • ASTM B0863-05 : Specification for Titanium and Titanium Alloy Wire
  • ASTM B0864/B0864M-00 : Specification for Corrugated Aluminum Box Culverts
  • ASTM B0865-04 : Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
  • ASTM B0866-95R03 : Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
  • ASTM B0867-95R03 : Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
  • ASTM B0868-96R02E02 : Practice for Contact Performance Classification of Electrical Connection Systems
  • ASTM B0869-04 : Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
  • ASTM B0870-02 : Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
  • ASTM B0871-01 : Test Method for Tear Testing of Aluminum Alloy Products
  • ASTM B0872-96R03 : Specification for Precipitation-Hardening Nickel-Iron-Chromium-Columbium (Nb)-Titanium-Aluminum Alloy (UNS N09908) Plate, Sheet, and Strip
  • ASTM B0873-01 : Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B 212, B 329, and B 417
  • ASTM B0874-96R03 : Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
  • ASTM B0875-96R03 : Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
  • ASTM B0876 : Specification for Borated Dispersion Strengthened Copper Plate, Sheet, Strip, and Rolled Bar for Nuclear Application
  • ASTM B0877-96R03 : Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
  • ASTM B0878-97R03 : Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
  • ASTM B0879-97R03E01 : Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
  • ASTM B0880-03 : Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
  • ASTM B0881-98AR04 : Terminology Relating to Aluminum- and Magnesium-Alloy Products
  • ASTM B0882-00 : Specification for Pre-Patinated Copper for Architectural Applications
  • ASTM B0883-97 : Specification for Metal Injection Molding (MIM), Ferrous Structural Parts
  • ASTM B0884-01 : Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
  • ASTM B0885-97R03 : Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
  • ASTM B0886-03 : Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
  • ASTM B0887-03 : Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
  • ASTM B0888-04 : Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
  • ASTM B0889 : Specification for Solid Hard-Drawn Aluminum Wire for Electrical Purposes
  • ASTM B0890-02 : Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
  • ASTM B0891-98R04 : Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
  • ASTM B0892-03 : Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
  • ASTM B0893-98R03 : Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
  • ASTM B0894-03 : Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
  • ASTM B0895-99 : Test Methods for Evaluating the Corrosion Resistance of Powder Metallurgy (P/M) Stainless Steel Parts/Specimens by Immersion in a Sodium Chloride Solution
  • ASTM B0896-99 : Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
  • ASTM B0897-03 : Specification for the Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot
  • ASTM B0898-99 : Specification for Reactive and Refractory Metal Clad Plate
  • ASTM B0899-04 : Terminology Relating to Non-ferrous Metals and Alloys
  • ASTM B0900-04 : Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
  • ASTM B0901-04 : Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
  • ASTM B0902-04A : Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
  • ASTM B0903-00 : Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
  • ASTM B0904-00R04 : Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
  • ASTM B0905-00 : Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
  • ASTM B0906-02 : Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
  • ASTM B0907-04 : Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders and for Thermal Spraying
  • ASTM B0908-03 : Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
  • ASTM B0909-00 : Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
  • ASTM B0910/B0910M-04 : Specification for Annealed Copper-Clad Steel Wire
  • ASTM B0911/B0911M-00 : Specification for ACSR Twisted Pair Conductor (ACSR/TP)
  • ASTM B0912-02 : Specification for Passivation of Stainless Steels Using Electropolishing
  • ASTM B0913-00E01 : Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
  • ASTM B0914-03E01 : Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
  • ASTM B0915-01 : Test Method for Measuring the Static Heat Resistance of a Self-Cleaning Oven Coating
  • ASTM B0916-01 : Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
  • ASTM B0917/B0917M-01 : Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
  • ASTM B0918-01 : Practice for Heat Treatment of Wrought Aluminum Alloys
  • ASTM B0919-01 : Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
  • ASTM B0920-01 : Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
  • ASTM B0921-02 : Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
  • ASTM B0922-02 : Test Method for Metal Powder Specific Surface Area by Physical Adsorption
  • ASTM B0923-02 : Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
  • ASTM B0924-02 : Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
  • ASTM B0925-03 : Practices for Production and Preparation of Powder Metallurgy (P/M) Test Specimens
  • ASTM B0926-03 : Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
  • ASTM B0927-03 : Specification for Brass Rod, Bar, and Shapes
  • ASTM B0928/B0928M-04A : Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
  • ASTM B0930-03 : Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
  • ASTM B0931-03 : Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts
  • ASTM B0932-04 : Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
  • ASTM B0933-04 : Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
  • ASTM B0934-04A : Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
  • ASTM B0936-04 : Specification for Copper-Chrome-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
  • ASTM B0937-04 : Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
  • ASTM B0938-04 : Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)
  • ASTM B100 : Specification for Wrought Copper Alloy Bearing and Expansion Plates and Sheets for Bridgeand Other Structural Use
  • ASTM B101 : Specification for Lead Coated Copper Sheet and Strip for Building Construction
  • ASTM B10-18 : Specification for Tin-Bronze and Leaded Tin-Bronze Sand Casting (Withdrawn 1933)
  • ASTM B102 : Specification for Lead and Tin Alloy Die Castings
  • ASTM B103/B103M : Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
  • ASTM B104-36 : Specification for Seamless Copper-Nickel Alloy Condenser Tubes and Ferrule Stock (Withdrawn 1936)
  • ASTM B105 : Specification for Hard Drawn Copper Alloy Wires for Electric Conductors
  • ASTM B106 : Test Methods for Flexivity of Thermostat Metals
  • ASTM B107/B107M : Specification for Magnesium Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
  • ASTM B107M-90 : Specification for Magnesium-Alloy Extruded Bars, Rods, Shapes, Tubes, and Wire (Metric) (Withdrawn 1992)
  • ASTM B108 : Specification for Aluminum Alloy Permanent Mold Castings
  • ASTM B109-44 : Specification for Aluminum and Aluminum Alloy Sheet and Plate (Withdrawn 1945)
  • ASTM B110-80 : Method of Dielectric Strength of Anodically Coated Aluminum (Withdrawn 1981)
  • ASTM B111/B111M : Specification for Copper and Copper Alloy Seamless Condenser Tubes and Ferrule Stock
  • ASTM B111M : Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock[Metric] (Withdrawn 2004) Replaced by B111/B111M
  • ASTM B111M-98e2 : Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock [Metric] (Withdrawn 2004)
  • ASTM B112-44 : Specification for Aluminum-Base Alloys in Ingot Form for Sand Die Castings (Withdrawn 1945)
  • ASTM B114 : Test Method for Temperature Resistance Constants of Sheet Materials for Shunts andPrecision Resistors
  • ASTM B115 : Specification for Electrolytic Copper Cathode
  • ASTM B116 : Specification for Figure 9 Deep Grooved and Figure 8 Copper Trolly Wire for IndustrialHaulage
  • ASTM B11-78 : Specification for Copper Plates for Locomotive Fireboxes (Withdrawn 1980)
  • ASTM B119-64 : Method of Nickel and Nickel-Alloy Wire and Ribbon for Electronic Tube Filaments (Withdrawn 1975)
  • ASTM B120-41 : Specification for Copper Beryllium Alloy Plate, Sheet, Strip, And Rolled Bar (Withdrawn 1944)
  • ASTM B121/B121M : Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
  • ASTM B122/B122M : Specification for Copper Nickel Tin Alloy, Copper Nickel Zinc Alloy (Nickel Silver), and CopperNickel Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B123-39 : Specification for Copper-Base Alloys in Ingot Form for Sand Casting (Withdrawn 1939)
  • ASTM B124/B124M : Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
  • ASTM B124M-96 : Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes [Metric] (Withdrawn 2000)
  • ASTM B125-44 : Specification for Aluminum-Base Alloys in Ingot Form for Sand Castings, Die Castings, and Permanent Mold Castings (Withdrawn 1945)
  • ASTM B126-46 : Specification for Aluminum-Manganese Alloy Sheet and Plate for Use in Welded Pressure Vessels (Withdrawn 1946)
  • ASTM B127 : Specification for Nickel Copper Alloy (UNS N04400) Plate, Sheet, and Strip
  • ASTM B12-76A : Specification for Copper Rods for Locomotive Staybolts (Withdrawn 1981)
  • ASTM B128-55 : Methods of Sleeves and Tubing for Radio Tube Cathodes (Withdrawn 1954)
  • ASTM B129 : Specification for Cartridge Brass Cartridge Case Cups
  • ASTM B130 : Specification for Commercial Bronze Strip for Bullet Jackets
  • ASTM B131 : Specification for Copper Alloy Bullet Jacket Cups
  • ASTM B132-70 : Specification for Leaded High-Strength Yellow Brass (Manganese Bronze) Sand Castings (Withdrawn 1972)
  • ASTM B133-93A : Specification for Copper Rod, Bar, and Shapes (Withdrawn 1994)
  • ASTM B133M-93A : Specification for Copper Rod, Bar, And Shapes Metric (Withdrawn 1994)
  • ASTM B134/B134M : Specification for Brass Wire
  • ASTM B135 : Specification for Seamless Brass Tube
  • ASTM B13-58 : Specification for Seamless Copper Boiler Tubes (Withdrawn 1960)
  • ASTM B135M : Specification for Seamless Brass Tube [Metric]
  • ASTM B137 : Test Method for Measurement of Coating Mass Per Unit Area on Anodically CoatedAluminum
  • ASTM B138/B138M : Specification for Manganese Bronze Rod, Bar, and Shapes
  • ASTM B138-96 : Specification for Manganese Bronze Rod, Bar and Shapes (Withdrawn 2001)
  • ASTM B138M-96 : Specification for Manganese Bronze Rod, Bar and Shapes [Metric] (Withdrawn 2001)
  • ASTM B139/B139M : Specification for Phosphor Bronze Rod, Bar, and Shapes
  • ASTM B139-95 : Specification for Phosphor Bronze Rod, Bar, and Shapes (Withdrawn 2001)
  • ASTM B139M-95 : Specification for Phosphor Bronze Rod, Bar, and Shapes [Metric] (Withdrawn 2001)
  • ASTM B140/B140M : Specification for Copper Zinc Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
  • ASTM B140M-92 : Specification for Copper-Zinc-Lead (Leaded Red Brass or Hardware Bronze) Rod, Bar, and Shapes [Metric] (Withdrawn 1997)
  • ASTM B141-58 : Specification for Electrodeposited Coatings of Nickel and Chromium on Copper and Copper-Base Alloys (Withdrawn 1966)
  • ASTM B142-61 : Specification for Electrodeposited Coatings of Nickel and Chromium on Zinc and Zinc-Base Alloys (Withdrawn 1966)
  • ASTM B143-70 : Specification for Tin-Bronze and Leaded Tin-Bronze Sand Castings (Withdrawn 1972)
  • ASTM B144-70 : Specification for High-Leaded Tin-Bronze Sand Castings (Withdrawn 1972)
  • ASTM B145-70 : Specification for Leaded Red Brass and Leaded Semi-Red Brass Sand Castings (Withdrawn 1972)
  • ASTM B146-70 : Specification for Leaded Yellow Brass Sand Castings for General Purposes (Withdrawn 1972)
  • ASTM B147-72 : Specification for High-Strength Yellow Brass (Manganese Bronze) and Leaded High-Strength Yellow Brass (Leaded Manganese Bronze) Sand Castings (Withdrawn 1972)
  • ASTM B148 : Specification for Aluminum Bronze Sand Castings
  • ASTM B149-70 : Specification for Leaded Nickel-Brass (Leaded Nickel-Silver) and Leaded Nickel-Bronze (Leaded Nickel-Silver) (Withdrawn 1972)
  • ASTM B150/B150M : Specification for Aluminum Bronze Rod, Bar, and Shapes
  • ASTM B150-98e2 : Specification for Aluminum Bronze Rod, Bar, and Shapes (Withdrawn 2002)
  • ASTM B150M-95a : Specification for Aluminum Bronze, Rod, Bar, and Shapes [Metric] (Withdrawn 2002)
  • ASTM B151/B151M : Specification for Copper Nickel Zinc Alloy (Nickel Silver) and Copper Nickel Rod and Bar
  • ASTM B15-18 : Specification for Copper and Copper-Based Alloy Forging Rod, Bar, and Shapes (Withdrawn 1939)
  • ASTM B151M-94 : Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar [Metric] (Withdrawn 2001)
  • ASTM B152/B152M : Specification for Copper Sheet, Strip, Plate, and Rolled Bar
  • ASTM B152M-97a : Specification for Copper Sheet, Strip, Plate, and Rolled Bar [Metric] (Withdrawn 2000)
  • ASTM B153 : Test Method for Expansion (Pin Test) of Copper and Copper Alloy Pipe and Tubing
  • ASTM B157-45 : Methods of Wiere for Supports Used in Electronic Devices and Lamps (Withdrawn 1954)
  • ASTM B158-41 : Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members for Electrical Conductors (Withdrawn 1941)
  • ASTM B159/B159M : Specification for Phosphor Bronze Wire
  • ASTM B159-96ae1 : Specification for Phosphor Bronze Wire (Withdrawn 2001)
  • ASTM B159M-96ae1 : Specification for Phosphor Bronze Wire [Metric] (Withdrawn 2001)
  • ASTM B16/B16M : Specification for Free Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
  • ASTM B160 : Specification for Nickel Rod and Bar
  • ASTM B161 : Specification for Nickel Seamless Pipe and Tube
  • ASTM B162 : Specification for Nickel Plate, Sheet, and Strip
  • ASTM B163 : Specification for Seamless Nickel and Nickel Alloy Condenser and Heat Exchanger Tubes
  • ASTM B164 : Specification for Nickel Copper Alloy Rod, Bar, and Wire
  • ASTM B165 : Specification for Nickel Copper Alloy (UNS N04400)* Seamless Pipe and Tube
  • ASTM B166 : Specification for Nickel Chromium Iron Alloys (UNS N06600, N06601, N06603, N06690,
  • ASTM B167 : Specification for Nickel Chromium Iron Alloys (UNS N06600, N06601, N06603, N06690,
  • ASTM B168 : Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603,N06690,
  • ASTM B169/B169M : Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
  • ASTM B169-95 : Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar (Withdrawn 2001)
  • ASTM B169M-96 : Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar [Metric] (Withdrawn 2001)
  • ASTM B16M-92 : Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines [Metric] (Withdrawn 2000)
  • ASTM B170 : Specification for Oxygen Free Electrolytic Copper/Refinery Shapes
  • ASTM B171/B171M : Specification for Copper Alloy Plate and Sheet for Pressure Vessels, Condensers, and HeatExchangers
  • ASTM B171M-96 : Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers and Heat Exchangers [Metric] (Withdrawn 1999)
  • ASTM B172 : Specification for Rope Lay Stranded Copper Conductors Having Bunch Stranded Members, for Electrical Conductors
  • ASTM B17-21 : Specification for Bronze Castings in the Rough for Locomotive Wearing Parts (Withdrawn 1925)
  • ASTM B173 : Specification for Rope Lay Stranded Copper Conductors Having Concentric StrandedMembers, for Electrical Conductors
  • ASTM B174 : Specification for Bunch Stranded Copper Conductors for Electrical Conductors
  • ASTM B175-45 : Specification for Round Nickel Wire for Lamps and Electric Devices (Withdrawn 1954)
  • ASTM B176 : Specification for Copper Alloy Die Castings
  • ASTM B176-95 : Specification for Copper-Alloy Die Castings (Withdrawn 2004)
  • ASTM B177 : Guide for Engineering Chromium Electroplating
  • ASTM B178-54 : Specification for Aluminum-Alloy Sheet and Plate for Pressure Vessel Application (Withdrawn 1956)
  • ASTM B179 : Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All CastingProcesses
  • ASTM B181-50 : Method of Effect of Controlled Atmospheres Upon Alloys in Electric Furnaces (Withdrawn 1969)
  • ASTM B182-49 : Method for Life Test of Electrical Contact Materials (Withdrawn 1981)
  • ASTM B183 : Practice for Preparation of Low Carbon Steel for Electroplating
  • ASTM B18-36 : Methods of Chemical Analysis of Lead, Tin, and Base Solder Metal (Withdrawn 1941)
  • ASTM B184-62 : Specification for Aluminum and Aluminum-Alloy Metal Arc-Welding Electrodes (Withdrawn 1968)
  • ASTM B185-43 : Method of Total Immersion Corrosion Test of Non-Ferrous Metals (Withdrawn 1963)
  • ASTM B186-42 : Specification for Special Quality Zinc-Base Alloy Die Castings (Withdrawn 1945)
  • ASTM B187/B187M : Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, andShapes
  • ASTM B187M-97 : Specification for Copper Bar, Bus Bar, Rod and Shapes [Metric] (Withdrawn 2002)
  • ASTM B188 : Specification for Seamless Copper Bus Pipe and Tube
  • ASTM B189 : Specification for Lead Coated and Lead Alloy Coated Soft Copper Wire for Electrical Purposes
  • ASTM B189-95 : Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes (Withdrawn 2004)
  • ASTM B19 : Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
  • ASTM B190-58 : Specification for Chromium-Nickel-Iron Alloy Castings (25-12 Class) for High-Temperature Service (Withdrawn 1960)
  • ASTM B191-44 : Method of Equivalent Yield Stress of Thermostat Metals (Withdrawn 1955)
  • ASTM B192-44 : Method of Alternate Immersion Corrosion Testing of Non-Ferrous Metals (Withdrawn 1963)
  • ASTM B193 : Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B194 : Specification for Copper Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B195-49 : Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar (Withdrawn 1951)
  • ASTM B196/B196M : Specification for Copper Beryllium Alloy Rod and Bar
  • ASTM B196-95a : Specification for Copper-Beryllium Alloy Rod and Bar
  • ASTM B196M-97 : Specification for Copper-Beryllium Alloy Rod and Bar [Metric] (Withdrawn 2001)
  • ASTM B197/B197M : Specification for Copper Beryllium Alloy Wire
  • ASTM B197M-93 : Specification for Copper-Beryllium Alloy Wire [Metric] (Withdrawn 1998)
  • ASTM B198-70 : Specification for Silicon Bronze and Silicon Brass Sand Castings (Withdrawn 1972)
  • ASTM B199 : Specification for Magnesium Alloy Permanent Mold Castings
  • ASTM B2 : Specification for Medium Hard Drawn Copper Wire
  • ASTM B200 : Specification for Electrodeposited Coatings of Lead and Lead Tin Alloys on Steel and FerrousAlloys
  • ASTM B201 : Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
  • ASTM B202-64 : Specification for Metal Powder Sintered Bearings (Oil Impregnated) (Withdrawn 1965)
  • ASTM B20-29 : Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks (Withdrawn 1939)
  • ASTM B203-46 : Method of Strength of Welded Joints of Lead Wires for Electronic Devices and Lamps (Withdrawn 1954)
  • ASTM B206/B206M : Specification for Copper Nickel Zinc Alloy (Nickel Silver) Wire and Copper Nickel Alloy Wire
  • ASTM B206M-94 : Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) Wire and Copper-Nickel Alloy Wire [Metric] (Withdrawn 1997)
  • ASTM B208 : Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold,
  • ASTM B209 : Specification for Aluminum and Aluminum Alloy Sheet and Plate
  • ASTM B209M : Specification for Aluminum and Aluminum Alloy Sheet and Plate [Metric]
  • ASTM B21/B21M : Specification for Naval Brass Rod, Bar, and Shapes
  • ASTM B210 : Specification for Aluminum and Aluminum Alloy Drawn Seamless Tubes
  • ASTM B210M : Specification for Aluminum and Aluminum Alloy Drawn Seamless Tubes [Metric]
  • ASTM B211 : Specification for Aluminum and Aluminum Alloy Bar, Rod, and Wire
  • ASTM B211M : Specification for Aluminum and Aluminum Alloy Bar, Rod, and Wire [Metric]
  • ASTM B212 : Test Method for Apparent Density of Free Flowing Metal Powders Using the Hall FlowmeterFunnel
  • ASTM B213 : Test Method for Flow Rate of Metal Powders
  • ASTM B214 : Test Method for Sieve Analysis of Metal Powders
  • ASTM B215 : Practices for Sampling Metal Powders
  • ASTM B216 : Specification for Tough Pitch Fire Refined Copper/Refinery Shapes
  • ASTM B217-63 : Specification for Magnesium-Base Alloy Extruded Tubes (Withdrawn 1964)
  • ASTM B21-96 : Specification for Naval Brass Rod, Bar, and Shapes
  • ASTM B21M-96 : Specification for Naval Brass Rod, Bar, and Shapes [Metric] (Withdrawn 2001)
  • ASTM B22 : Specification for Bronze Castings for Bridges and Turntables
  • ASTM B220-48 : Methods of Tension Testing Metallic Materials (Withdrawn 1954)
  • ASTM B221 : Specification for Aluminum and Aluminum Alloy Extruded Bars, Rods, Wire, Profiles, andTubes
  • ASTM B221M : Specification for Aluminum and Aluminum Alloy Extruded Bars, Rods, Wire, Profiles, andTubes [Metric]
  • ASTM B222-83A : Specification for Sintered Iron-Copper Structural Parts (Withdrawn 1988)
  • ASTM B223 : Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • ASTM B224 : Classification of Coppers
  • ASTM B225-69 : Specification for Copper and Copper-Alloy Arc-Welding Electrodes (Withdrawn 1968)
  • ASTM B226 : Specification for Cored, Annular, Concentric Lay Stranded Copper Conductors
  • ASTM B227 : Specification for Hard Drawn Copper Clad Steel Wire
  • ASTM B228 : Specification for Concentric Lay Stranded Copper Clad Steel Conductors
  • ASTM B229 : Specification for Concentric Lay Stranded Copper and Copper Clad Steel CompositeConductors
  • ASTM B23 : Specification for White Metal Bearing Alloys (Known Commercially as “Babbitt Metal”)
  • ASTM B230/B230M : Specification for Aluminum 1350 H19 Wire for Electrical Purposes
  • ASTM B230M-98 : Specification for Aluminum 1350-H19 Wire for Electrical Purposes [Metric] (Withdrawn 1999)
  • ASTM B231/B231M : Specification for Concentric Lay Stranded Aluminum 1350 Conductors
  • ASTM B231M-95 : Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors [Metric] (Withdrawn 1999)
  • ASTM B232/B232M : Specification for Concentric Lay Stranded Aluminum Conductors, Coated Steel Reinforced(ACSR)
  • ASTM B232M-97 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel-Reinforced (ACSR) [Metric] (Withdrawn 1999)
  • ASTM B233 : Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
  • ASTM B234 : Specification for Aluminum and Aluminum Alloy Drawn Seamless Tubes for Condensers andHeat Exchangers
  • ASTM B234M : Specification for Aluminum and Aluminum Alloy Drawn Seamless Tubes for Condensers andHeat Exchangers [Metric]
  • ASTM B235-62 : Specification for Aluminum Alloy Extruded Tubes (Withdrawn 1962)
  • ASTM B236 : Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
  • ASTM B237 : Specification for Refined Antimony
  • ASTM B240 : Specification for Zinc and Zinc Aluminum (ZA) Alloys in Ingot Form for Foundry and DieCastings
  • ASTM B241/B241M : Specification for Aluminum and Aluminum Alloy Seamless Pipe and Seamless Extruded Tube
  • ASTM B241M-83A : Specification for Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube (Metric) (Withdrawn 1986)
  • ASTM B242 : Guide for Preparation of High Carbon Steel for Electroplating
  • ASTM B243 : Terminology of Powder Metallurgy
  • ASTM B244 : Endorsed by AmericanElectroplaters/ SocietyEndorsed by NationalAssociation of MetalFinishersTest Method for Measurement of Thickness of Anodic Coatings onAluminum and ofOther Nonconductive Coatings onNonmagnetic Basis Metals with Eddy-Current
  • ASTM B24-46 : Specification for Aluminum Ingots for Remelting (Withdrawn 1955)
  • ASTM B245-63 : Specification for Standard Weight Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) (Withdrawn 1968)
  • ASTM B246 : Specification for Tinned Hard Drawn and Medium Hard Drawn Copper Wire for ElectricalPurposes
  • ASTM B247 : Specification for Aluminum and Aluminum Alloy Die Forgings, Hand Forgings, and RolledRing Forgings
  • ASTM B247M : Specification for Aluminum and Aluminum Alloy Die Forgings, Hand Forgings, and RolledRing Forgings [Metric]
  • ASTM B248 : Specification for General Requirements for Wrought Copper and Copper Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B248M : Specification for General Requirements for Wrought Copper and Copper Alloy Plate, Sheet, Strip and Rolled Bar [Metric]
  • ASTM B249/B249M : Specification for General Requirements for Wrought Copper and Copper Alloy Rod, Bar, Shapes and Forgings
  • ASTM B249M-94a : Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings [Metric] (Withdrawn 2000)
  • ASTM B250/B250M : Specification for General Requirements for Wrought Copper Alloy Wire
  • ASTM B250M-95 : Specification for General Requirements for Wrought Copper Alloy Wire [Metric] (Withdrawn 2001)
  • ASTM B251 : Specification for General Requirements for Wrought Seamless Copper and Copper AlloyTube
  • ASTM B251M : Specification for General Requirements for Wrought Seamless Copper and Copper AlloyTube [Metric]
  • ASTM B252 : Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
  • ASTM B253 : Guide for Preparation of Aluminum Alloys for Electroplating
  • ASTM B254 : Practice for Preparation of and Electroplating on Stainless Steel
  • ASTM B25-44 : Specification for Aluminum Alloy Sheet and Plate (Withdrawn 1945)
  • ASTM B255-83a(1995)e1 : Specification for Sintered Bronze Structural Parts (Withdrawn 2000)
  • ASTM B258 : Specification for Standard Nominal Diameters and Cross Sectional Areas of AWG Sizes ofSolid Round Wires Used as Electrical Conductors
  • ASTM B259-69 : Specification for Copper and Copper-Alloy Welding Rods (Withdrawn 1968)
  • ASTM B260-62 : Specification for Brazing Filler Metal (Withdrawn 1968)
  • ASTM B261-63 : Specification for Zinc-Coated (Galvanized) Steel Core Wire (With Coatings Heavier than Standard Weight) for Aluminum Conductors, Steel Reinforced (ACSR) (Withdrawn 1968)
  • ASTM B262-61 : Specification for Aluminum Wire, EC-H16 or -H26, for Electrical Purposes (Withdrawn 1977)
  • ASTM B263 : Test Method for Determination of Cross Sectional Area of Stranded Conductors
  • ASTM B264- : Specification for Titanium Ingot (Withdrawn 1954)
  • ASTM B265 : Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
  • ASTM B266- : Specification for Iodide Titanium (Withdrawn 1954)
  • ASTM B267 : Specification for Wire for Use In Wire Wound Resistors
  • ASTM B271 : Specification for Copper Base Alloy Centrifugal Castings
  • ASTM B272 : Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire andStrip)
  • ASTM B273- : Specification for Aluminum and Aluminum-Alloy Bars, Rods, and Shapes for Pressure Vessel Applications (Withdrawn 1956)
  • ASTM B27-36 : Methods of Chemical Analysis for Sulfur in Special Brasses and Bronzes (Withdrawn 1942)
  • ASTM B274-56 : Specification for Aluminum and Aluminum-Alloy Pipe and Tube for Pressure Vessel Applications (Withdrawn 1956)
  • ASTM B275 : Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
  • ASTM B276 : Test Method for Apparent Porosity in Cemented Carbides
  • ASTM B277 : Test Method for Hardness of Electrical Contact Materials
  • ASTM B279 : Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wirefor Magnet Wire Fabrication
  • ASTM B280 : Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
  • ASTM B281 : Practice for Preparation of Copper and Copper Base Alloys for Electroplating and ConversionCoatings
  • ASTM B282-83a(1995)e1 : Specification for Sintered Brass Structural Parts (Withdrawn 2000)
  • ASTM B283 : Specification for Copper and Copper Alloy Die Forgings (Hot Pressed)
  • ASTM B28-36 : Methods of Chemical Analysis of Special Brasses and Bronzes (Withdrawn 1942)
  • ASTM B284-79 : Specification for Rosin Flux-Core Solder (Withdrawn 1990)
  • ASTM B285-61 : Specification for Aluminum and Aluminum-Alloy Welding Rods and Bare Electrodes (Withdrawn 1968)
  • ASTM B286 : Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
  • ASTM B287-74 : Method of Acetic Acid-Salt Spray (Fog) Testing (Withdrawn 1987)
  • ASTM B29 : Specification for Refined Lead
  • ASTM B291-86 : Specification for Copper-Zinc-Manganese Alloy (Manganese Brass) Sheet and Strip (Withdrawn 1992)
  • ASTM B292-72 : Specification for Nickel-Tin Bronze Castings (Withdrawn 1972)
  • ASTM B293-76 : Method of Subsieve Analysis of Granular Metal Powders by Air Classification (Withdrawn 1984)
  • ASTM B294 : Test Method for Hardness Testing of Cemented Carbides
  • ASTM B295-69 : Specification for Nickel and Nickel-Alloy Covered Welding Electrodes (Withdrawn 1968)
  • ASTM B296 : Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
  • ASTM B297-69 : Specification for Tungsten Arc-Welding Electrodes (Withdrawn 1969)
  • ASTM B298 : Specification for Silver Coated Soft or Annealed Copper Wire
  • ASTM B299 : Specification for Titanium Sponge
  • ASTM B3 : Specification for Soft or Annealed Copper Wire
  • ASTM B30 : Specification for Copper Alloys in Ingot Form
  • ASTM B301/B301M : Specification for Free Cutting Copper Rod, Bar, Wire and Shapes
  • ASTM B301M-96 : Specification for Free-Cutting Copper Rod and Bar [Metric] (Withdrawn 1999)
  • ASTM B302 : Specification for Threadless Copper Pipe, Standard Sizes
  • ASTM B303-83A : Specification for Copper-Infiltrated Sintered Carbon Steel Structural Parts (Withdrawn 1989)
  • ASTM B304-69 : Specification for Nickel and Nickel-Alloy Bare Welding Rods and Electrodes (Withdrawn 1968)
  • ASTM B305-56 : Test Method for Maximum Loading Stress at Temperature of Thermostat Metals ( Cantilever Beam Method) (Withdrawn 1985)
  • ASTM B306 : Specification for Copper Drainage Tube (DWV)
  • ASTM B307-67 : Specification for Aluminum-Alloy Drawn Seamless Coiled Tubes for Special Purpose Applications (Withdrawn 1967)
  • ASTM B308/B308M : Specification for Aluminum Alloy 6061 T6 Standard Structural Profiles
  • ASTM B308M-88 : Specification for Aluminum-Alloy 6061-T6 Standard Structural Shapes, Rolled or Extruded (Metric) (Withdrawn 1990)
  • ASTM B309-58 : Specification for High Density Iron, Sintered Metal Powder Structural Parts (Withdrawn 1963)
  • ASTM B310-83A : Specification for Sintered Carbon Steel Structural Parts (Withdrawn 1989)
  • ASTM B312 : Test Method for Green Strength for Compacted Metal Powder Specimens
  • ASTM B31-28 : Specification for Copper-Base Alloys in Ingot Form for Sand Casting (Withdrawn 1932)
  • ASTM B313/B313M : Specification for Aluminum and Aluminum Alloy Round Welded Tubes
  • ASTM B313M-88 : Specification for Aluminum and Aluminum-Alloy Round Welded Tubes (Metric) (Withdrawn 1990)
  • ASTM B314-90 : Specification for Aluminum 1350 Wire for Communication Cable (Withdrawn 1994)
  • ASTM B315 : Specification for Seamless Copper Alloy Pipe and Tube
  • ASTM B316/B316M : Specification for Aluminum and Aluminum Alloy Rivet and Cold Heading Wire and Rods
  • ASTM B316M-92A : Specification for Aluminum and Aluminum-Alloy Rivet and Cold Heading Wire and Rods (Metric) (Withdrawn 1993)
  • ASTM B317/B317M : Specification for Aluminum Alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles forElectrical Purposes (Bus Conductor)
  • ASTM B318-62 : Specification for Type A and Type B Aluminum-Alloy Drawn Annealed Seamless Coiled Tubes (Withdrawn 1962)
  • ASTM B319 : Guide for Preparation of Lead and Lead Alloys for Electroplating
  • ASTM B32 : Specification for Solder Metal
  • ASTM B320 : Practice for Preparation of Iron Castings for Electroplating
  • ASTM B321-60 : Recommended Practice for Dimension Standards for Projection Welding Contacts (Withdrawn 1979)
  • ASTM B322 : Guide for Cleaning Metals Prior to Electroplating
  • ASTM B323-61 : Specification for Specification for Aluminum Wire, EC-H14 or -H24, for Electrical Purposes (Withdrawn 1977)
  • ASTM B324 : Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
  • ASTM B325-58 : Specification for Refined Secondary Lead (Withdrawn 1964)
  • ASTM B326-76 : Test Method for Resistance Characteristics of Microcontacts (Withdrawn 1991)
  • ASTM B327 : Specification for Master Alloys Used in Making Zinc Die Casting Alloys
  • ASTM B328 : Test Method for Density, Oil Content, and Interconnected Porosity of Sintered MetalStructural Parts and Oil Impregnated Bearings
  • ASTM B329 : Test Method for Apparent Density of Metal Powders and Compounds Using the ScottVolumeter
  • ASTM B330 : Test Method for Fisher Number of Metal Powders and Related Compounds
  • ASTM B331 : Test Method for Compressibility of Metal Powders in Uniaxial Compaction
  • ASTM B333 : Specification for Nickel Molybdenum Alloy Plate, Sheet, and Strip
  • ASTM B334-71 : Specification for Nickel-Molybdenum-Chromium Alloy (UNS N10002) Plate and Sheet (Withdrawn 1979)
  • ASTM B335 : Specification for Nickel Molybdenum Alloy Rod
  • ASTM B336-71 : Specification for Nickel-Molybdenum-Chromium Alloy (UNS N10002) Rod (Withdrawn 1979)
  • ASTM B337-95 : Specification for Seamless and Welded Titanium and Titanium Alloy Pipe (Withdrawn 1997)
  • ASTM B338 : Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensersand Heat Exchangers
  • ASTM B339 : Specification for Pig Tin
  • ASTM B340-61 : Test Method for Surety of Make of Electrical Contact Materials (Withdrawn 1990)
  • ASTM B341/B341M : Specification for Aluminum Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ)
  • ASTM B341M-93 : Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ) [Metric] (Withdrawn 1998)
  • ASTM B342-63 : Test Method for Electrical Conductivity by Use of Eddy Currents (Withdrawn 1984)
  • ASTM B343 : Practice for Preparation of Nickel for Electroplating with Nickel
  • ASTM B344 : Specification for Drawn or Rolled Nickel Chromium and Nickel Chromium Iron Alloys forElectrical Heating Elements
  • ASTM B345/B345M : Specification for Aluminum and Aluminum Alloy Seamless Pipe and Seamless Extruded Tubefor Gas and Oil Transmission and Distribution Piping Systems
  • ASTM B345M-96 : Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems (Metric) (Withdrawn 1998)
  • ASTM B346-59 : Specification for Machinable High-Density Tungsten-Nickel-Copper Alloys (Withdrawn 1965)
  • ASTM B347-85 : Test Method for Hardness of Sintered Metal Friction Materials (Withdrawn 1991)
  • ASTM B348 : Specification for Titanium and Titanium Alloy Bars and Billets
  • ASTM B349/B349M : Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
  • ASTM B350/B350M : Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
  • ASTM B351/B351M : Specification for Hot Rolled and Cold Finished Zirconium and Zirconium Alloy Bars, Rod, andWire for Nuclear Application
  • ASTM B352/B352M : Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for NuclearApplication
  • ASTM B353 : Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes forNuclear Service (Except Nuclear Fuel Cladding)
  • ASTM B35-36 : Methods of Chemical Analysis of Pig Lead (Withdrawn 1941)
  • ASTM B354 : Terminology Relating to Uninsulated Metallic Electrical Conductors
  • ASTM B355 : Specification for Nickel Coated Soft or Annealed Copper Wire
  • ASTM B356-67 : Specification for Zirconium and Zirconium Alloy Forgings and Extrusions for Nuclear Application (Withdrawn 1975)
  • ASTM B357-79 : Specification for Remelted Lithium Metal in Ingot Form (Withdrawn 1986)
  • ASTM B358-78 : Specification for Copper-Nickel Addition Alloy (Withdrawn 1979)
  • ASTM B359/B359M : Specification for Copper and Copper Alloy Seamless Condenser and Heat Exchanger TubesWith Integral Fins
  • ASTM B359M-95 : Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins [Metric] (Withdrawn 2002)
  • ASTM B36/B36M : Specification for Brass Plate, Sheet, Strip, And Rolled Bar
  • ASTM B360 : Specification for Hard Drawn Copper Capillary Tube for Restrictor Applications
  • ASTM B361 : Specification for Factory Made Wrought Aluminum and Aluminum Alloy Welding Fittings
  • ASTM B362 : Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
  • ASTM B363 : Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy WeldingFittings
  • ASTM B364 : Specification for Tantalum and Tantalum Alloy Ingots
  • ASTM B365 : Specification for Tantalum and Tantalum Alloy Rod and Wire
  • ASTM B366 : Specification for Factory Made Wrought Nickel and Nickel Alloy Fittings
  • ASTM B367 : Specification for Titanium and Titanium Alloy Castings
  • ASTM B368 : Method for Copper Accelerated Acetic Acid Salt Spray (Fog) Testing (CASS Test)
  • ASTM B369 : Specification for Copper Nickel Alloy Castings
  • ASTM B37 : Specification for Aluminum for Use in Iron and Steel Manufacture
  • ASTM B370 : Specification for Copper Sheet and Strip for Building Construction
  • ASTM B371/B371M : Specification for Copper Zinc Silicon Alloy Rod
  • ASTM B371-96 : Specification for Copper-Zinc-Silicon Alloy Rod (Withdrawn 2002)
  • ASTM B372 : Specification for Seamless Copper and Copper Alloy Rectangular Waveguide Tube
  • ASTM B373 : Specification for Aluminum Foil for Capacitors
  • ASTM B374 : Terminology Relating to Electroplating
  • ASTM B375-63 : Specification for Electrodeposited Coatings of Multilayer Nickel Plus Chromium on Steel (Withdrawn 1966)
  • ASTM B376-65 : Test Method for Density of Sintered Metal Friction Materials (Withdrawn 1991)
  • ASTM B377-64 : Specification for Steel Backed Metal Powder Bearing and Bushing Alloys (Withdrawn 1971)
  • ASTM B378-65 : Test Method for Transverse Rupture Strength of Sintered Metal Friction Materials (Withdrawn 1990)
  • ASTM B380 : Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the CorrodkoteProcedure
  • ASTM B381 : Specification for Titanium and Titanium Alloy Forgings
  • ASTM B382-61 : Specification for Titanium and Titanium Alloy Bare Welding Rods and Electrodes (Withdrawn 1968)
  • ASTM B38-36 : Methods of Chemical Analysis of Slab Zinc (Spelter) ( Withdrawn 1941)
  • ASTM B383-64 : Specification for Primary Niobium (Withdrawn 1979)
  • ASTM B384-74 : Specification for Molybdenum and Molybdenum Alloy Forgings (Withdrawn 1984)
  • ASTM B385-74 : Specification for Molybdenum and Molybdenum Alloy Billets for Reforging (Withdrawn 1985)
  • ASTM B386 : Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
  • ASTM B387 : Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
  • ASTM B388 : Specification for Thermostat Metal Sheet and Strip
  • ASTM B389 : Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
  • ASTM B39 : Specification for Nickel
  • ASTM B390 : Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
  • ASTM B391 : Specification for Niobium and Niobium Alloy Ingots
  • ASTM B392 : Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
  • ASTM B393 : Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
  • ASTM B394 : Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
  • ASTM B395/B395M : Specification for U Bend Seamless Copper and Copper Alloy Heat Exchanger and CondenserTubes
  • ASTM B395M-95 : Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes [Metric] (Withdrawn 2002)
  • ASTM B396 : Specification for Aluminum Alloy 5005 H19 Wire for Electrical Purposes (Withdrawn 2003) No Replacement
  • ASTM B396-00 : Specification for Aluminum-Alloy 5005-H19 Wire for Electrical Purposes (Withdrawn 2003)
  • ASTM B397 : Specification for Concentric Lay Stranded Aluminum Alloy 5005 H19 Conductors (Withdrawn2003) No Replacement
  • ASTM B397-85(1999) : Specification for Concentric-Lay-Stranded Aluminum-Alloy 5005-H19 Conductors (Withdrawn 2003)
  • ASTM B398/B398M : Specification for Aluminum Alloy 6201 T81 Wire for Electrical Purposes
  • ASTM B398M-97 : Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes [Metric] (Withdrawn 1999)
  • ASTM B399/B399M : Specification for Concentric Lay Stranded Aluminum Alloy 6201 T81 Conductors
  • ASTM B399M-97 : Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors [Metric] (Withdrawn 1999)
  • ASTM B400 : Specification for Compact Round Concentric Lay Stranded Aluminum 1350 Conductors
  • ASTM B401 : Specification for Compact Round Concentric Lay Stranded Aluminum Conductors, SteelReinforced (ACSR/COMP)
  • ASTM B402-86 : Specification for Copper-Nickel Alloy Plate and Sheet for Pressure Vessels (Withdrawn 1986)
  • ASTM B402M-86 : Specification for Copper-Nickel Alloy Plate and Sheet for Pressure Vessels (Metric) (Withdrawn 1986)
  • ASTM B403 : Specification for Magnesium Alloy Investment Castings
  • ASTM B40-36 : Photometric Methods for Chemical Analysis of Aluminum and Aluminum Base Alloys (Withdrawn 1941)
  • ASTM B404/B404M : Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-ExchangerTubes with Integral Fins No Replacement
  • ASTM B404/B404M-02 : Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins
  • ASTM B404M-95 : Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins (Metric) (Withdrawn 1999)
  • ASTM B405-63 : Specification for Electrodeposited Coatings of Multi Layer Nickel Plus Chromium on Zinc and Zinc-Base Alloys (Withdrawn 1966)
  • ASTM B406 : Test Method for Transverse Rupture Strength of Cemented Carbides
  • ASTM B407 : Specification for Nickel Iron Chromium Alloy Seamless Pipe and Tube
  • ASTM B408 : Specification for Nickel Iron Chromium Alloy Rod and Bar
  • ASTM B409 : Specification for Nickel Iron Chromium Alloy Plate, Sheet, and Strip
  • ASTM B410-68 : Specification for Unalloyed Sintered Tungsten Billets, Bars, Rods, and Performs for Forging (Withdrawn 1979)
  • ASTM B411/B411M : Specification for Copper Nickel Silicon Alloy Rod and Bar
  • ASTM B412-95 : Specification for Copper-Nickel-Silicon Alloy Wire (Withdrawn 2000)
  • ASTM B413 : Specification for Refined Silver
  • ASTM B41-36 : Method for Chemical Analysis of Nickel (Withdrawn 1941)
  • ASTM B414-67 : Specification for Primary Hafnium Metal Sponge and Other Forms (Withdrawn 1974)
  • ASTM B415 : Specification for Hard Drawn Aluminum Clad Steel Wire
  • ASTM B416 : Specification for Concentric Lay Stranded Aluminum Clad Steel Conductors
  • ASTM B417 : Test Method for Apparent Density of Non Free Flowing Metal Powders Using the CarneyFunnel
  • ASTM B418 : Specification for Cast and Wrought Galvanic Zinc Anodes
  • ASTM B419-64 : Specification for Unalloyed Uranium Castings (Withdrawn 1971)
  • ASTM B42 : Specification for Seamless Copper Pipe, Standard Sizes
  • ASTM B420-64 : Specification for Unalloyed Uranium Melting Stock (Withdrawn 1971)
  • ASTM B421-76 : Test Method for Electrical Resistivity of Cemented Tungsten Carbides (Withdrawn 1987)
  • ASTM B422 : Specification for Copper Aluminum Silicon Cobalt Alloy, Copper Nickel Silicon MagnesiumAlloy, Copper Nickel Silicon Alloy, Copper Nickel Aluminum Magnesium Alloy, and Copper Nickel TinAlloy Sheet and Strip
  • ASTM B423 : Specification for Nickel Iron Chromium Molybdenum Copper Alloy (UNS N08825 andN08221)* Seamless Pipe and Tube
  • ASTM B424 : Specification for Ni Fe Cr Mo Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, andStrip
  • ASTM B425 : Specification for Ni Fe Cr Mo Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
  • ASTM B426-83A : Specification for Sintered Copper-Steel Structural Parts (Withdrawn 1989)
  • ASTM B427 : Specification for Gear Bronze Alloy Castings
  • ASTM B427-93a : Specification for Gear Bronze Alloy Castings (Withdrawn 2002)
  • ASTM B428 : Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
  • ASTM B429/B429M : Specification for Aluminum Alloy Extruded Structural Pipe and Tube
  • ASTM B43 : Specification for Seamless Red Brass Pipe, Standard Sizes
  • ASTM B430 : Test Method for Particle Size Distribution of Refractory Metal Powders and RelatedCompounds by Turbidimetry
  • ASTM B431-85 : Practice for Processing of Mandrels for Electroforming (Withdrawn 1993)
  • ASTM B432 : Specification for Copper and Copper Alloy Clad Steel Plate
  • ASTM B433-70 : Specification for Copper-Nickel Alloys in Ingot Form for Castings (Withdrawn 1975)
  • ASTM B434 : Specification for Nickel Molybdenum Chromium Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
  • ASTM B435 : Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
  • ASTM B436-71 : Specification for Nickel-Chromium-Molybdenum-Iron-Columbium Alloy (UNS NO6001) Sheet and Plate (Withdrawn 1979)
  • ASTM B437-67 : Method for Tension Testing of Cemented Carbides (Withdrawn 1980)
  • ASTM B438/B438M : Specification for Bronze Powder Metallurgy (P/M) Bearing (Oil Impregnated)
  • ASTM B438M-95A : Specification for Sintered Bronze Bearings (Oil Impregnated) (Metric) (Withdrawn 1998)
  • ASTM B439 : Specification for Iron Base Sintered Bearings (Oil Impregnated)
  • ASTM B440 : Specification for Cadmium
  • ASTM B441 : Specification for Copper Cobalt Beryllium and Copper Nickel Beryllium Rod and Bar (UNSNos. C17500 and C17510)
  • ASTM B442-80 : Specification for Tough-Pitch Chemically Refined Copper Refinery Shapes (Withdrawn 1993)
  • ASTM B443 : Specification for Nickel Chromium Molybdenum Columbium Alloy (UNS N06625) and NickelChromium Molybdenum Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
  • ASTM B44-33 : Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock (Withdrawn 1936)
  • ASTM B444 : Specification for Nickel Chromium Molybdenum Columbium Alloys (UNS N06625) and NickelChromium Molybdenum Silicon Alloy (UNS N06219) Pipe and Tube
  • ASTM B445-87 : Specification for Nickel-Chromium-Iron-Columbium-Molybdenum-Tungsten Alloy (UNS N06102) Seamless Pipe and Tube (Withdrawn 1995)
  • ASTM B446 : Specification for Nickel Chromium Molybdenum Columbium Alloy (UNS N06625), NickelChromium Molybdenum Silicon Alloy (UNS N06219), and Nickel Chromium Molybdenum TungstenAlloy (UNS N06650)* Rod and Bar
  • ASTM B447 : Specification for Welded Copper Tube
  • ASTM B448-66 : Specification for Magnesium-Alloy Welding Rods and Bare Electrodes (Withdrawn 1968)
  • ASTM B449 : Specification for Chromates on Aluminum
  • ASTM B450-85 : Practice for Engineering Design of Electroformed Articles (Withdrawn 1993)
  • ASTM B451-93 : Specification for Copper Foil, Strip, and Sheet for Printed Circuits and Carrier Tapes (Withdrawn 1998)
  • ASTM B452 : Specification for Copper Clad Steel Wire for Electronic Application
  • ASTM B453/B453M : Specification for Copper Zinc Lead Alloy (Leaded Brass) Rod, Bar, and Shapes
  • ASTM B45-36 : Methods for Chemical Analysis of Brasses (Withdrawn 1941)
  • ASTM B453-96 : Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod (Withdrawn 2001)
  • ASTM B453M-96 : Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod [Metric] (Withdrawn 2001)
  • ASTM B454-76 : Specification for Mechanically Deposited Coatings of Cadmium and Zinc on Ferrous Metals (Withdrawn 1981)
  • ASTM B455 : Specification for Copper Zinc Lead Alloy (Leaded Brass) Extruded Shapes
  • ASTM B456 : Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and NickelPlus Chromium
  • ASTM B457 : Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
  • ASTM B458-83a(1995)e1 : Specification for Sintered Nickel Silver Structural Parts (Withdrawn 2000)
  • ASTM B459-67 : Specification for Tungsten Base, High Density Metal (Withdrawn 1980)
  • ASTM B460 : Withdrawn 1992 : Test Method for Dynamic Coefficient of Friction and Wear of Sintered Metal Friction Materials Under Dry Conditions
  • ASTM B461-67 : Test Method for Frictional Characteristics of Sintered Metal Friction Materials Run in Lubricants (Withdrawn 1990)
  • ASTM B462 : Specification for Forged or Rolled UNSN06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665,
  • ASTM B46-36 : Methods of Chemical Analysis for Sulfur in Special Brasses and Bronzes (Withdrawn 1942)
  • ASTM B465 : Specification for Copper Iron Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B466/B466M : Specification for Seamless Copper Nickel Pipe and Tube
  • ASTM B466M-92 : Specification for Seamless Copper-Nickel Pipe and Tube [Metric] (Withdrawn 1998)
  • ASTM B467 : Specification for Welded Copper Nickel Pipe
  • ASTM B468 : Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
  • ASTM B469-94 : Specification for Seamless Copper-Alloy Tubes for Pressure Applications (Withdrawn 2000)
  • ASTM B47 : Specification for Copper Trolley Wire
  • ASTM B470 : Specification for Bonded Copper Conductors for Use in Hookup Wires for ElectronicEquipment
  • ASTM B471-93 : Specification for UNS NO8020, UNS N08026, and UNS NO8024 Nickel Alloy Spring Wire (Withdrawn 1999)
  • ASTM B472 : Specification for Nickel Alloy Billets and Bars for Reforging
  • ASTM B473 : Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
  • ASTM B474 : Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
  • ASTM B475 : Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round WeavingWire
  • ASTM B476 : Specification for General Requirements for Wrought Precious Metal Electrical ContactMaterials
  • ASTM B477 : Specification for Gold Silver Nickel Electrical Contact Alloy
  • ASTM B478 : Test Method for Cross Curvature of Thermostat Metals
  • ASTM B4-79 : Specification for Tough-Pitch Lake Copper-Refinery Shapes (Withdrawn 1980)
  • ASTM B479 : Specification for Annealed Aluminum and Aluminum Alloy Foil for Flexible Barrier, FoodContact, and Other Applications
  • ASTM B48 : Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
  • ASTM B480 : Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
  • ASTM B481 : Practice for Preparation of Titanium and Titanium Alloys for Electroplating
  • ASTM B482 : Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
  • ASTM B483/B483M : Specification for Aluminum and Aluminum Alloy Drawn Tubes for General PurposeApplications
  • ASTM B483M-95 : Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General-Purpose Applications (Metric) (Withdrawn 1998)
  • ASTM B484-83A : Specification for Sintered Nickel Steel Structural Parts (Withdrawn 1989)
  • ASTM B485-76 : Method for Diametral Compression Testing of Cemented Carbides (Withdrawn 1983)
  • ASTM B486-74 : Specification for Paste Solder (Withdrawn 1990)
  • ASTM B487 : Test Method for Measurement of Metal and Oxide Coating Thickness by MicroscopicalExamination of a Cross Section
  • ASTM B488 : Specification for Electrodeposited Coatings of Gold for Engineering Uses
  • ASTM B489 : Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited MetalCoatings on Metals
  • ASTM B49 : Specification for Copper Rod Drawing Stock for Electrical Purposes
  • ASTM B490 : Practice for Micrometer Bend Test for Ductility of Electrodeposits
  • ASTM B491/B491M : Specification for Aluminum and Aluminum Alloy Extruded Round Tubes for General PurposeApplications
  • ASTM B491M-88 : Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General Purpose Applications (Metric) (Withdrawn 1990)
  • ASTM B492-82 : Specification for Cast Copper-Nickel Ship Tailshaft Sleeves (Withdrawn 1989)
  • ASTM B493 : Specification for Zirconium and Zirconium Alloy Forgings
  • ASTM B494/B494M : Specification for Primary Zirconium
  • ASTM B495 : Specification for Zirconium and Zirconium Alloy Ingots
  • ASTM B496 : Specification for Compact Round Concentric Lay Stranded Copper Conductors
  • ASTM B497 : Guide for Measuring Voltage Drop on Closed Arcing Contacts
  • ASTM B498/B498M : Specification for Zinc Coated (Galvanized) Steel Core Wire for Aluminum Conductors, SteelReinforced (ACSR)
  • ASTM B498M-93 : Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) [Metric] (Withdrawn 1998)
  • ASTM B499 : Endorsed by AmericanElectroplaters/ SocietyEndorsed by NationalAssociation of MetalFinishersTest Method for Measurement of Coating Thicknesses by the MagneticMethod :
  • ASTM B500/B500M : Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, SteelReinforced (ACSR)
  • ASTM B500M-97 : Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR) [Metric] (Withdrawn 1998)
  • ASTM B501 : Specification for Silver Coated, Copper Clad Steel Wire for Electronic Application
  • ASTM B502 : Specification for Aluminum Clad Steel Core Wire for Aluminum Conductors, Aluminum CladSteel Reinforced
  • ASTM B50-29 : Specification for Non-Ferrous Insect Screen Cloth (Withdrawn 1936)
  • ASTM B503-69 : Practice for Use of Copper and Nickel Electroplating Solutions for Electroforming (Withdrawn 1993)
  • ASTM B504 : Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
  • ASTM B505/B505M : Specification for Copper Base Alloy Continuous Castings
  • ASTM B506-81 : Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction (Withdrawn 1993)
  • ASTM B507 : Practice for Design of Articles To Be Electroplated on Racks
  • ASTM B508 : Specification for Copper Alloy Strip for Flexible Metal Hose
  • ASTM B509-77 : Specification for Supplementary Requirements for Nickel Alloy Plate for Nuclear Applications (Withdrawn 1990)
  • ASTM B510-77 : Specification for Supplementary Requirements for Nickel Alloy Rod and Bar for Nuclear Applications (Withdrawn 1990)
  • ASTM B511 : Specification for Nickel Iron Chromium Silicon Alloy Bars and Shapes
  • ASTM B512 : Specification for Nickel Chromium Silicon Alloy (UNS N08330) Billets and Bars
  • ASTM B513-79 : Specification for Pipe Supplementary Requirements for Nickel Alloy Seamless Pipe and Tube for Nuclear Applications (Withdrawn 1990)
  • ASTM B514 : Specification for Welded Nickel Iron Chromium Alloy Pipe
  • ASTM B51-42 : Test Method for Phospher Tin (Withdrawn 1944)
  • ASTM B515 : Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 AlloyTubes
  • ASTM B516 : Specification for Welded Nickel Chromium Iron Alloy (UNS N06600, UNS N06603, UNSN06025, and UNS N06045 Tubes
  • ASTM B517 : Specification for Welded Nickel Chromium Iron Alloy (UNS N06600, UNS N06603, UNSN06025, and UNS N06045) Pipe
  • ASTM B518-87 : Specification for Nickel-Chromium-Iron-Columbium-Molybdenum-Tungsten Alloy (UNS N06102) Rod and Bar (Withdrawn 1995)
  • ASTM B519-92 : Specification for Nickel-Chromium-Iron-Columbium-Molybdenum-Tungsten Alloy (UNS N06102) Plate, Sheet, and Strip (Withdrawn 1995)
  • ASTM B520 : Specification for Tin Coated, Copper Clad Steel Wire for Electronic Application
  • ASTM B521 : Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
  • ASTM B522 : Specification for Gold Silver Platinum Electrical Contact Alloy
  • ASTM B523/B523M : Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
  • ASTM B524/B524M : Specification for Concentric Lay Stranded Aluminum Conductors, Aluminum Alloy Reinforced(ACAR, 1350/6201)
  • ASTM B52-48 : Specification for Phospher Copper (Withdrawn 1979)
  • ASTM B524M-97 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) [Metric] (Withdrawn 1999)
  • ASTM B525-83A : Specification for Sintered Austenitic Stainless Steel Structural Parts (Withdrawn 1989)
  • ASTM B526-70 : Test Method for Coefficient of Friction and Wear of Sintered Metals Friction Materials Under Dry Clutch Conditions (Withdrawn 1990)
  • ASTM B527 : Test Method for Determination of Tap Density of Metallic Powders and Compounds
  • ASTM B528 : Test Method for Transverse Rupture Strength of Metal Powder Specimens
  • ASTM B529-70 : Test Method for Measurement of Coating Thickness by the Eddy Current Test Method : Non-Conductive Coating on Non-Magnetic Basis Metals (Withdrawn 1978)
  • ASTM B530 : Test Method for Measurement of Coating Thicknesses by the Magnetic Method :
  • ASTM B531 : Specification for Aluminum Alloy 5005 Drawing Stock for Electrical Purposes (Withdrawn2003) No Replacement
  • ASTM B531-90(1998)e1 : Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes (Withdrawn 2003)
  • ASTM B532 : Specification for Appearance of Electroplated Plastic Surfaces
  • ASTM B533 : Test Method for Peel Strength of Metal Electroplated Plastics
  • ASTM B534 : Specification for Copper Cobalt Beryllium Alloy and Copper Nickel Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B53-46 : Specification for Silicon Copper (Withdrawn 1979)
  • ASTM B535 : Specification for Nickel Iron Chromium Silicon Alloys (UNS N08330 and N08332) SeamlessPipe and Tube
  • ASTM B536 : Specification for Nickel Iron Chromium Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
  • ASTM B537 : Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
  • ASTM B538-70 : Method of Fact (Ford Anodized Aluminum Corrosion Test) (Withdrawn 1986)
  • ASTM B539 : Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
  • ASTM B540 : Specification for Palladium Electrical Contact Alloy
  • ASTM B541 : Specification for Gold Electrical Contact Alloy
  • ASTM B543 : Specification for Welded Copper and Copper Alloy Heat Exchanger Tube
  • ASTM B54-39 : Specification for High-Strength Yellow Brass (Manganese Bronze) and Leaded High-Strength Yellow Brass (Leaded Manganese Bronze) Sand Castings (Withdrawn 1940)
  • ASTM B543M-91 : Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube [Metric] (Withdrawn 2000)
  • ASTM B544-71 : Specification for Round Solid EC Grade Aluminum Conductor (Withdrawn 1977)
  • ASTM B545 : Specification for Electrodeposited Coatings of Tin
  • ASTM B546 : Specification for Electric Fusion Welded Ni Cr Co Mo Alloy (UNS N06617), Ni Fe Cr Si Alloys(UNS N08330 and UNS N08332), Ni Cr Fe Al Alloy (UNS N06603), Ni Cr Fe Alloy (UNS N06025), andNi Cr Fe Si Alloy (UNS N06045) Pipe
  • ASTM B547/B547M : Specification for Aluminum and Aluminum Alloy Formed and Arc Welded Round Tube
  • ASTM B548 : Test Method for Ultrasonic Inspection of Aluminum Alloy Plate for Pressure Vessels
  • ASTM B549 : Specification for Concentric Lay Stranded Aluminum Conductors, Aluminum Clad SteelReinforced (ACSR/AW)
  • ASTM B550/B550M : Specification for Zirconium and Zirconium Alloy Bar and Wire
  • ASTM B551/B551M : Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
  • ASTM B552 : Specification for Seamless and Welded Copper Nickel Tubes For Water Desalting Plants
  • ASTM B55-33 : Specification for Seamless 70-30 Brass Condenser Tubes and Ferrule Stock (Withdrawn 1936)
  • ASTM B553-79 : Test Method for Thermal Cycling of Electroplated Plastics (Withdrawn 1991)
  • ASTM B554-85 : Recommended Practice for Measurement of Thickness of Metallic Coatings on Nonmetallic Substrates (Withdrawn 1986)
  • ASTM B555 : Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the DroppingTest
  • ASTM B556 : Guide for Measurement of Thin Chromium Coatings by Spot Test
  • ASTM B557 : Test Methods for Tension Testing Wrought and Cast Aluminum and Magnesium AlloyProducts
  • ASTM B557M : Test Methods for Tension Testing Wrought and Cast Aluminum and Magnesium AlloyProducts [Metric]
  • ASTM B558 : Practice for Preparation of Nickel Alloys for Electroplating
  • ASTM B559 : Specification for Nickel Coated, Copper Clad Steel Wire for Electronic Application
  • ASTM B560 : Specification for Modern Pewter Alloys
  • ASTM B561 : Specification for Refined Platinum
  • ASTM B562 : Specification for Refined Gold
  • ASTM B563 : Specification for Palladium Silver Copper Electrical Contact Alloy
  • ASTM B56-33 : Specification for Seamless Muntz Metal Condenser Tubes and Ferrule Stock (Withdrawn 1936)
  • ASTM B564 : Specification for Nickel Alloy Forgings
  • ASTM B565 : Test Method for Shear Testing of Aluminum and Aluminum Alloy Rivets and Cold HeadingWire and Rods
  • ASTM B566 : Specification for Copper Clad Aluminum Wire
  • ASTM B567 : Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
  • ASTM B568 : Test Method for Measurement of Coating Thickness by X Ray Spectrometry
  • ASTM B569 : Specification for Brass Strip in Narrow Widths and Light Gage for Heat Exchanger Tubing
  • ASTM B570 : Specification for Copper Beryllium Alloy (UNS No. C17000 and C17200) Forgings andExtrusions
  • ASTM B571 : Practice for Qualitative Adhesion Testing of Metallic Coatings
  • ASTM B572 : Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
  • ASTM B57-27 : Specification for Copper-Alloy Condenser Tube Plates (Withdrawn 1941)
  • ASTM B573 : Specification for Nickel Molybdenum Chromium Iron Alloy (UNS N10003, N10242)* Rod
  • ASTM B574 : Specification for Low Carbon Nickel Chromium Molybdenum, Low Carbon NickelMolybdenum Chromium Tantalum, Low Carbon Nickel Chromium Molybdenum Copper, and LowCarbon Nickel Chromium Molybdenum Tungsten Alloy Rod
  • ASTM B575 : Specification for Low Carbon Nickel Chromium Molybdenum, Low Carbon Nickel ChromiumMolybdenum Copper, Low Carbon Nickel Chromium Molybdenum Tantalum, and Low Carbon NickelChromium Molybdenum Tungsten Alloy Plate, Sheet, and Strip
  • ASTM B576 : Guide for Arc Erosion Testing of Electrical Contact Materials
  • ASTM B577 : Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) inCopper
  • ASTM B578 : Test Method for Microhardness of Electroplated Coatings
  • ASTM B579 : Specification for Electrodeposited Coatings of Tin Lead Alloy (Solder Plate)
  • ASTM B580 : Specification for Anodic Oxide Coatings on Aluminum
  • ASTM B581 : Specification for Nickel Chromium Iron Molybdenum Copper Alloy Rod
  • ASTM B582 : Specification for Nickel Chromium Iron Molybdenum Copper Alloy Plate, Sheet, and Strip
  • ASTM B583-83 : Test Method for Porosity in Cold Coatings on Metal Substrates (Withdrawn 1985)
  • ASTM B584 : Specification for Copper Alloy Sand Castings for General Applications
  • ASTM B58-44 : Specification for Aluminum-Base Alloys in Ingot Form for Sand Castings (Withdrawn 1945)
  • ASTM B585-86 : Specification for Seamless Copper-Alloy Water Tube (Withdrawn 1988)
  • ASTM B586-86 : Specification for Welded Copper-Alloy Water Tube (Withdrawn 1987)
  • ASTM B587 : Specification for Welded Brass Tube
  • ASTM B588 : Test Method for Measurement of Thickness of Transparent or Opaque Coatings by DoubleBeam Interference Microscope Technique
  • ASTM B589 : Specification for Refined Palladium
  • ASTM B590-73 : Specification for Nickel-Iron-Chromium-Manganese-Molybdenum Alloy (UNS NO8245) Plate, Sheet, and Strip (Withdrawn 1980)
  • ASTM B591 : Specification for Copper Zinc Tin and Copper Zinc Tin Iron Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
  • ASTM B592 : Specification for Copper Zinc aluminum Cobalt Alloy, Copper Zinc Tin Iron Alloy Plate, Sheet, Strip, and Rolled Bar
  • ASTM B593 : Test Method for Bending Fatigue Testing for Copper Alloy Spring Materials
  • ASTM B59-39 : Specification for Aluminum-Bronze Sand Castings (Withdrawn 1940)
  • ASTM B594 : Practice for Ultrasonic Inspection of Aluminum Alloy Wrought Products for AerospaceApplications
  • ASTM B595 : Specification for Sintered Aluminum Structural Parts
  • ASTM B596 : Specification for Gold Copper Alloy Electrical Contact Material
  • ASTM B597 : Practice for Heat Treatment of Aluminum Alloys (Withdrawn 2002) Replaced by B917,B918 0 ASTM 0
  • ASTM B597-92(1998) : Practice for Heat Treatment of Aluminum Alloys (Withdrawn 2002)
  • ASTM B598 : Practice for Determining Offset Yield Strength in Tension for Copper Alloys
  • ASTM B599 : Specification for Nickel Iron Chromium Molybdenum Columbium Stabilized Alloy (UNSN08700) Plate, Sheet, and Strip
  • ASTM B600 : Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
  • ASTM B601 : Classification for Temper Designations for Copper and Copper Alloys/Wrought and Cast
  • ASTM B602 : Test Method for Attribute Sampling of Metallic and Inorganic Coatings
  • ASTM B603 : Specification for Drawn or Rolled Iron Chromium Aluminum Alloys for Electrical HeatingElements
  • ASTM B604 : Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium onPlastics
  • ASTM B60-41 : Specification for Tin-Bronze and Leaded Tin-Bronze Sand Castings (Withdrawn 1943)
  • ASTM B605 : Specification for Electrodeposited Coatings of Tin Nickel Alloy
  • ASTM B606 : Specification for High Strength Zinc Coated (Galvanized) Steel Core Wire for Aluminum andAluminum Alloy Conductors, Steel Reinforced
  • ASTM B607 : Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
  • ASTM B608 : Specification for Welded Copper Alloy Pipe
  • ASTM B609/B609M : Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, forElectrical Purposes
  • ASTM B609M-97 : Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes [Metric] (Withdrawn 1999)
  • ASTM B61 : Specification for Steam or Valve Bronze Castings
  • ASTM B611 : Test Method for Abrasive Wear Resistance of Cemented Carbides
  • ASTM B612 : Specification for Iron Bronze Sintered Bearings (Oil Impregnated)
  • ASTM B613 : Guide for Preparing Specifications for Miniature Brushes of Composite Materials for SlidingElectric Contacts
  • ASTM B614 : Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
  • ASTM B615 : Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
  • ASTM B616 : Specification for Refined Rhodium
  • ASTM B617 : Specification for Coin Silver Electrical Contact Alloy
  • ASTM B618 : Specification for Aluminum Alloy Investment Castings
  • ASTM B619 : Specification for Welded Nickel and Nickel Cobalt Alloy Pipe
  • ASTM B61-93 : Specification for Steam or Valve Bronze Castings (Withdrawn 2002)
  • ASTM B62 : Specification for Composition Bronze or Ounce Metal Castings
  • ASTM B620 : Specification for Nickel Iron Chromium Molybdenum Alloy (UNS N08320) Plate, Sheet, andStrip
  • ASTM B621 : Specification for Nickel Iron Chromium Molybdenum Alloy (UNS N08320) Rod
  • ASTM B622 : Specification for Seamless Nickel and Nickel Cobalt Alloy Pipe and Tube
  • ASTM B623-93 : Specification for Tough-Pitch Fire-Refined High-Conductivity Copper-Refinery Shapes (Withdrawn 1996)
  • ASTM B624 : Specification for High Strength, High Conductivity Copper Alloy Wire for ElectronicApplication
  • ASTM B625 : Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, andUNS R20033 Plate, Sheet, and Strip
  • ASTM B626 : Specification for Welded Nickel and Nickel Cobalt Alloy Tube
  • ASTM B627-84(1992)e1 : Test Method for Electrolytic Corrosion Testing (EC Test) (Withdrawn 1998)
  • ASTM B628 : Specification for Silver Copper Eutectic Electrical Contact Alloy
  • ASTM B629 : Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
  • ASTM B62-93 : Specification for Composition Bronze or Ounce Metal Castings (Withdrawn 2002)
  • ASTM B63 : Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
  • ASTM B630 : Practice for Preparation of Chromium for Electroplating with Chromium
  • ASTM B631 : Specification for Silver Tungsten Electrical Contact Materials
  • ASTM B632/B632M : Specification for Aluminum Alloy Rolled Tread Plate
  • ASTM B632M- : Withdrawn 1993 Replaced by B 632/B62M : Specification for Aluminum-Alloy Rolled Tread Plate [Metric]
  • ASTM B633 : Specification for Electrodeposited Coatings of Zinc on Iron and Steel
  • ASTM B634 : Specification for Electrodeposited Coatings of Rhodium for Engineering Use
  • ASTM B635 : Specification for Coatings of Cadmium Tin Mechanically Deposited
  • ASTM B636 : Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the SpiralContractometer
  • ASTM B637 : Specification for Precipitation Hardening Nickel Alloy Bars, Forgings, and Forging Stock forHigh Temperature Service
  • ASTM B638 : Withdrawn 1992 : Specification for Copper and Copper-Alloy Solar Heat Absorber Panels
  • ASTM B639 : Specification for Precipitation Hardening Cobalt Containing Alloys (UNS R30155 and UNSR30816) Rod, Bar, Forgings, and Forging Stock for High Temperature Service
  • ASTM B640 : Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
  • ASTM B641-93 : Specification for Seamless and Welded Copper Distribution Tube (Type D) (Withdrawn
  • ASTM B642 : Withdrawn 1994 : Specification for Welded Copper Alloy UNS C21000 Water Tube
  • ASTM B643 : Specification for Copper Beryllium Alloy Seamless Tube
  • ASTM B644 : Specification for Copper Alloy Addition Agents
  • ASTM B64-43 : Specification for Brazing Solder (Withdrawn 1951)
  • ASTM B646 : Practice for Fracture Toughness Testing of Aluminum Alloys
  • ASTM B647 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster HardnessGage
  • ASTM B648 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
  • ASTM B649 : Specification for Ni Fe Cr Mo Cu N Low Carbon Alloys (UNS N08925, UNS N08031, UNSN08354, and UNS N08926), and Cr Ni Fe N Low Carbon Alloy (UNS R20033) Bar and Wire
  • ASTM B650 : Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
  • ASTM B651 : Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper PlusNickel Plus Chromium Electroplated Surfaces with Double Beam Interference Microscope
  • ASTM B652/B652M : Specification for Niobium Hafnium Alloy Ingots
  • ASTM B65-28 : Specification for Lead Yellow Brass Sand Castings for General Purposes (Withdrawn 1937)
  • ASTM B653/B653M : Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
  • ASTM B654/B654M : Specification for Niobium Hafnium Alloy Foil, Sheet, Strip, and Plate
  • ASTM B655/B655M : Specification for Niobium Hafnium Alloy Bar, Rod, and Wire
  • ASTM B656-91 : Guide for Autocatalytic (Electroless) Nickel-Phosphorus Deposition on Metals for Engineering Use (Withdrawn 2000)
  • ASTM B657 : Guide for Metallographic Identification of Microstructure in Cemented Carbides
  • ASTM B658/B658M : Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
  • ASTM B659 : Guide for Measuring Thickness of Metallic and Inorganic Coatings
  • ASTM B66 : Specification for Bronze Castings for Steam Locomotive Wearing Parts
  • ASTM B660 : Practices for Packaging/Packing of Aluminum and Magnesium Products
  • ASTM B661 : Practice for Heat Treatment of Magnesium Alloys
  • ASTM B662 : Specification for Silver Molybdenum Electrical Contact Material
  • ASTM B663 : Specification for Silver Tungsten Carbide Electrical Contact Material
  • ASTM B664 : Specification for 80% Silver 20% Graphite Sliding Contact Material
  • ASTM B665 : Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
  • ASTM B666/B666M : Practice for Identification Marking of Aluminum and Magnesium Products
  • ASTM B666M-90 : Practice for Indentification Marking of Aluminum Products (Metric) (Withdrawn 1992)
  • ASTM B667 : Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
  • ASTM B668 : Specification for UNS N08028 Seamless Pipe and Tube
  • ASTM B669-97 : Specification for Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings (Withdrawn 1999)
  • ASTM B67 : Specification for Car and Tender Journal Bearings, Lined
  • ASTM B670 : Specification for Precipitation Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Stripfor High Temperature Service
  • ASTM B671 : Specification for Refined Iridium
  • ASTM B672 : Specification for Nickel Iron Chromium Molybdenum Columbium Stabilized Alloy (UNSN08700) Bar and Wire
  • ASTM B673 : Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
  • ASTM B674 : Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
  • ASTM B675 : Specification for UNS N08367 Welded Pipe
  • ASTM B676 : Specification for UNS N08367 Welded Tube
  • ASTM B677 : Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
  • ASTM B678 : Test Method for Solderability of Metallic Coated Products
  • ASTM B679 : Specification for Electrodeposited Coatings of Palladium for Engineering Use
  • ASTM B67-93a : Specification for Car and Tender Journal Bearings, Lined (Withdrawn 2002)
  • ASTM B68 : Specification for Seamless Copper Tube, Bright Annealed
  • ASTM B680 : Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • ASTM B681-88(1994) : Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Transparent Coatings on Opaque Surfaces Using the Light-Section Microscope (Withdrawn 2001)
  • ASTM B682 : Specification for Standard Metric Sizes of Electrical Conductors
  • ASTM B683 : Specification for Pure Palladium Electrical Contact Material
  • ASTM B684 : Specification for Platinum Iridium Electrical Contact Materials
  • ASTM B685 : Specification for Palladium Copper Electrical Contact Material
  • ASTM B686 : Specification for Aluminum Alloy Castings, High Strength
  • ASTM B687 : Specification for Brass, Copper, and Chromium Plated Pipe Nipples
  • ASTM B688 : Specification for Chromium Nickel Molybdenum Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
  • ASTM B689 : Specification for Electroplated Engineering Nickel Coatings
  • ASTM B68M : Specification for Seamless Copper Tube, Bright Annealed [Metric]
  • ASTM B69 : Specification for Rolled Zinc
  • ASTM B690 : Specification for Iron Nickel Chromium Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
  • ASTM B691 : Specification for Iron Nickel Chromium Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
  • ASTM B692 : Specification for 75% Silver 25% Graphite Sliding Contact Material
  • ASTM B693 : Specificationfor Silver Nickel Electrical Contact Materials
  • ASTM B694 : Specification for Copper, Copper Alloy, Copper Clad Bronze (CCB), Copper Clad StainlessSteel (CCS), and Copper Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
  • ASTM B695 : Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
  • ASTM B696 : Specification for Coatings of Cadmium Mechanically Deposited
  • ASTM B697 : Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic andInorganic Coatings
  • ASTM B698 : Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
  • ASTM B699 : Specification for Coatings of Cadmium Vacuum Deposited on Iron and Steel
  • ASTM B70 : Test Method for Change of Resistance With Temperature of Metallic Materials for ElectricalHeating
  • ASTM B700 : Specification for Electrodeposited Coatings of Silver for Engineering Use
  • ASTM B701/B701M : Specification for Concentric Lay Stranded Self Damping Aluminum Conductors, SteelReinforced (ACSR/SD)
  • ASTM B702 : Specification for Copper Tungsten Electrical Contact Material
  • ASTM B704 : Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
  • ASTM B705 : Specification for Nickel Alloy (UNS N06625, N06219 and N08825) Welded Pipe
  • ASTM B706 : Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
  • ASTM B707M-88 : Specification for Seamless Copper Water Tube (Special Use) (Metric) (Withdrawn 1991)
  • ASTM B708 : Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
  • ASTM B709 : Specification for Iron Nickel Chromium Molybdenum Alloy (UNS N08028)* Plate, Sheet, andStrip
  • ASTM B710 : Specification for Nickel Iron Chromium Silicon Alloy Welded Pipe
  • ASTM B711 : Specification for Concentric Lay Stranded Aluminum Alloy Conductors, Steel Reinforced(AACSR) (6201)
  • ASTM B712 : Guide for Determination of Sodium and Potassium Content For Silver Cadmium Oxide Contact Materials
  • ASTM B71-34 : Methods of Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1941)
  • ASTM B713-82(1997)e1 : Terminology Relating to Superconductors (Withdrawn 2001)
  • ASTM B714-82(1997)e1 : Test Method for D-C Critical Current of Composite Superconductors (Withdrawn 2001)
  • ASTM B715 : Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
  • ASTM B716-93 : Specification for Welded Copper Water Tube (Withdrawn 1994)
  • ASTM B716M-93 : Specification for Welded Copper Water Tube (Metric) (Withdrawn 1994)
  • ASTM B717 : Specification for Refined Ruthenium
  • ASTM B718 : Specification for Nickel Chromium Molybdenum Cobalt Tungsten Iron Silicon Alloy (UNSN06333) Plate, Sheet, and Strip
  • ASTM B719 : Specification for Nickel Chromium Molybdenum Cobalt Tungsten Iron Silicon Alloy (UNSN06333) Bar
  • ASTM B720-93 : Specification for Seamless UNS N08310 Tube (Withdrawn 1999)
  • ASTM B721 : Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts(Withdrawn 2004) Replaced by B931,B933,B934
  • ASTM B721-91(1999) : Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts (Withdrawn 2004)
  • ASTM B722 : Specification for Nickel Chromium Molybdenum Cobalt Tungsten Iron Silicon Alloy (UNSN06333) Seamless Pipe and Tube
  • ASTM B723 : Specification for Nickel Chromium Molybdenum Cobalt Tungsten Iron Silicon Alloy (UNSN06333) Welded Pipe
  • ASTM B724 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non Caliper Type Instrument
  • ASTM B725 : Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNSN04400) Pipe
  • ASTM B726 : Specification for Nickel Chromium Molybdenum Cobalt Tungsten Iron Silicon Alloy (UNSN06333) Welded Tube
  • ASTM B727 : Practice for Preparation of Plastics Materials for Electroplating
  • ASTM B72-72 : Specification for Fire-Refined Casting Copper (Withdrawn 1976)
  • ASTM B727-83(1995) : Practice for Preparation of Plastics Materials for Electroplating (Withdrawn 2004)
  • ASTM B728-84 : Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors (Withdrawn 1988)
  • ASTM B729 : Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Pipeand Tube
  • ASTM B730-93 : Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube (Withdrawn 2002)
  • ASTM B731 : Specification for 60% Palladium 40% Silver Electrical Contact Material
  • ASTM B732-84(1993)e1 : Test Method for Evaluating the Corrosivity of Solder Fluxes for Copper Tubing Systems (Withdrawn 1998)
  • ASTM B73-29 : Specification for Silver Solders (Withdrawn 1952)
  • ASTM B733 : Specification for Autocatalytic (Electroless) Nickel Phosphorus Coatings on Metal
  • ASTM B734 : Specification for Electrodeposited Copper for Engineering Uses
  • ASTM B735 : Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
  • ASTM B736 : Specification for Aluminum, Aluminum Alloy and Aluminum Clad Steel Cable Shielding Stock
  • ASTM B737 : Specification for Hot Rolled and/or Cold Finished Hafnium Rod and Wire
  • ASTM B738 : Specification for Fine Wire Bunch Stranded and Rope Lay Bunch Stranded CopperConductors for Use as Electrical Conductors
  • ASTM B7-39 : Specification for Tough-Pitch Lake Copper-Refinery Shapes (Withdrawn 1940)
  • ASTM B739 : Specification for Nickel Iron Chromium Silicon Alloy Welded Tube
  • ASTM B740 : Specification for Copper Nickel Tin Spinodal Alloy Strip
  • ASTM B741 : Test Method for Porosity In Gold Coatings On Metal Substrates By Paper Electrography(Withdrawn 2005) No Replacement
  • ASTM B741-95(2000) : Test Method for Porosity In Gold Coatings On Metal Substrates By Paper Electrography (Withdrawn 2005)
  • ASTM B742 : Specification for Fine Silver Electrical Contact Fabricated Material
  • ASTM B743 : Specification for Seamless Copper Tube in Coils
  • ASTM B74-32 : Specification for High-Leaded Tin-Bronze Sand Castings (Withdrawn 1940)
  • ASTM B744/B744M : Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
  • ASTM B745/B745M : Specification for Corrugated Aluminum Pipe for Sewers and Drains
  • ASTM B746/B746M : Specification for Corrugated Aluminum Alloy Structural Plate for Field Bolted Pipe, PipeArches, and Arches
  • ASTM B747 : Specification for Copper Zirconium Alloy Sheet and Strip
  • ASTM B748 : Test Method for Measurement of Thickness of Metallic Coatings by Measurement of CrossSection with a Scanning Electron Microscope
  • ASTM B749 : Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
  • ASTM B75 : Specification for Seamless Copper Tube
  • ASTM B750 : Specification for GALFAN (Zinc 5 % Aluminum Mischmetal) Alloy in Ingot Form for Hot DipCoatings
  • ASTM B751 : Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
  • ASTM B752 : Specification for Castings, Zirconium Base, Corrosion Resistant, for General Application
  • ASTM B753 : Specification for Thermostat Component Alloys
  • ASTM B754 : Test Method for Measuring and Recording the Deviations from Flatness in Copper andCopper Alloy Strip
  • ASTM B755 : Specification for Nickel Chromium Molybdenum Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
  • ASTM B756 : Specification for Nickel Chromium Molybdenum Tungsten Alloy (UNS N06110) Rod and Bar
  • ASTM B757 : Specification for Nickel Chromium Molybdenum Tungsten Alloys (UNS N06110) Welded Pipe
  • ASTM B758 : Specification for Nickel Chromium Molybdenum Tungsten Alloys (UNS N06110) Welded Tube
  • ASTM B759 : Specification for Nickel Chromium Molybdenum Tungsten Alloys (UNS N06110) Pipe andTube
  • ASTM B75M : Specification for Seamless Copper Tube [Metric]
  • ASTM B76 : Test Method for Accelerated Life of Nickel Chromium and Nickel Chromium Iron Alloys forElectrical Heating
  • ASTM B760 : Specification for Tungsten Plate, Sheet, and Foil
  • ASTM B761 : Test Method for Particle Size Distribution of Metal Powders and Related Compounds by XRay Monitoring of Gravity Sedimentation
  • ASTM B762 : Test Method of Variables Sampling of Metallic and Inorganic Coatings
  • ASTM B763 : Specification for Copper Alloy Sand Castings for Valve Applications
  • ASTM B764 : Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual
  • ASTM B765 : Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and RelatedMetallic Coatings
  • ASTM B766 : Specification for Electrodeposited Coatings of Cadmium
  • ASTM B767 : Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings byGravimetric and Other Chemical Analysis Procedures
  • ASTM B768 : Specification for Copper Cobalt Beryllium Alloy and Copper Nickel Beryllium Alloy Strip andSheet
  • ASTM B769 : Test Method for Shear Testing of Aluminum Alloys
  • ASTM B77 : Test Method for Thermoelectric Power of Electrical Resistance Alloys
  • ASTM B770 : Specification for Copper Beryllium Alloy Sand Castings for General Applications
  • ASTM B771 : Test Method for Short Rod Fracture Toughness of Cemented Carbides
  • ASTM B772 : Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing andNonarcing)
  • ASTM B773 : Guide for Ultrasonic C Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
  • ASTM B774 : Specification for Low Melting Point Alloys
  • ASTM B775 : Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
  • ASTM B776 : Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
  • ASTM B777 : Specification for Tungsten Base, High Density Metal
  • ASTM B778 : Specification for Shaped Wire Compact Concentric Lay Stranded Aluminum Conductors(AAC/TW)
  • ASTM B779 : Specification for Shaped Wire Compact Concentric Lay Stranded Aluminum Conductors, Steel Reinforced (ACSR/TW)
  • ASTM B78 : Test Method of Accelerated Life of Iron Chromium Aluminum Alloys for Electrical Heating
  • ASTM B780 : Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
  • ASTM B781 : Guide for Silver Cadmium Oxide Contact Material
  • ASTM B782 : Specification for Iron Graphite Sintered Bearings (Oil Impregnated)
  • ASTM B783 : Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
  • ASTM B784 : Specification for Modified Concentric Lay Stranded Copper Conductors for Use in InsulatedElectrical Cables
  • ASTM B785-93 : Specification for Compact Round Modified Concentric-Lay-Stranded Copper Conductors For Use in Insulated Electrical Cables (Withdrawn 1998)
  • ASTM B786 : Specification for 19 Wire Combination Unilay Stranded Aluminum Conductors for SubsequentInsulation
  • ASTM B787/B787M : Specification for 19 Wire Combination Unilay Stranded Copper Conductors for SubsequentInsulation
  • ASTM B788/B788M : Practice for Installing Factory Made Corrugated Aluminum Culverts and Storm Sewer Pipe
  • ASTM B789/B789M : Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
  • ASTM B790/B790M : Practice for Structural Design of Corrugated Aluminum Pipe, Pipe Arches, and Arches forCulverts, Storm Sewers, and Other Buried Conduits
  • ASTM B791-97 : Specification for Zinc-Aluminum (ZA) Alloy Foundry Die Castings (Withdrawn 1999)
  • ASTM B792 : Specification for Zinc Alloys in Ingot Form for Slush Casting
  • ASTM B793 : Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic InjectionMolds
  • ASTM B794 : Test Method for Durability Wear Testing of Separable Electrical Connector Systems UsingElectrical Resistance Measurements
  • ASTM B79-44 : Specification for Aluminum and Aluminum Alloy Sheet and Plate (Withdrawn 1945)
  • ASTM B795 : Test Method for Determining the Percentage of Alloyed or Unalloyed Iron ContaminationPresent in Powder Forged (P/F) Steel Parts
  • ASTM B796 : Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging(P/F) Applications
  • ASTM B797 : Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle OxideNetworks in Powder Forged (P/F) Steel Parts
  • ASTM B798 : Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel BulkElectrography
  • ASTM B799 : Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur DioxideVapor
  • ASTM B8 : Specification for Concentric Lay Stranded Copper Conductors, Hard, Medium Hard, or Soft
  • ASTM B80 : Specification for Magnesium Alloy Sand Castings
  • ASTM B800 : Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes Annealed andIntermediate Tempers
  • ASTM B801 : Specification for Concentric Lay Stranded Conductors of 8000 Series Aluminum Alloy forSubsequent Covering or Insulation
  • ASTM B802/B802M : Specification for Zinc 5% Aluminum Mischmetal Alloy Coated Steel Core Wire for AluminumConductors, Steel Reinforced (ACSR)
  • ASTM B802M-94 : Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) [Metric] (Withdrawn 1998)
  • ASTM B803 : Specification for High Strength Zinc 5% Aluminum Mischmetal Alloy Coated Steel Core Wirefor Aluminum and Aluminum Alloy Conductors, Steel Reinforced
  • ASTM B804 : Specification for UNS N08367 and UNS N08926 Welded Pipe
  • ASTM B805 : Specification for Precipitation Hardening Nickel Alloys UNS N07716, N07725, N07773, N07776, and N09777, Bar and Wire
  • ASTM B806 : Specification for Copper Alloy Permanent Mold Castings for General Applications
  • ASTM B806-93a : Specification for Copper Alloy Permanent Mold Castings for General Applications (Withdrawn 2002)
  • ASTM B807/B807M : Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
  • ASTM B808 : Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz CrystalMicrobalances
  • ASTM B809 : Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers of Sulfur”)
  • ASTM B810 : Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass ofCopper Coupons
  • ASTM B811 : Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
  • ASTM B812 : Test Method for Resistance to Environmental Degradation of Electrical Pressure ConnectionsInvolving Aluminum and Intended for Residential Applications
  • ASTM B813 : Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
  • ASTM B814 : Specification for Nickel Chromium Iron Molybdenum Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
  • ASTM B815 : Specification for Cobalt Chromium Nickel Molybdenum Tungsten Alloy (UNS R31233) Rod
  • ASTM B816 : Specification for Coatings of Cadmium Zinc Mechanically Deposited
  • ASTM B817 : Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
  • ASTM B818 : Specification for Cobalt Chromium Nickel Molybdenum Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
  • ASTM B819 : Specification for Seamless Copper Tube for Medical Gas Systems
  • ASTM B820 : Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
  • ASTM B821 : Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle SizeAnalysis
  • ASTM B822 : Test Method for Particle Size Distribution of Metal Powders and Related Compounds by LightScattering
  • ASTM B824 : Specification for General Requirements for Copper Alloy Castings
  • ASTM B825 : Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
  • ASTM B82-57 : Specification for Drawn or Rolled Alloy 80 Percent Nickel, 20 Percent Chromium, for Electrical-Heating Elements (Withdrawn 1957)
  • ASTM B826 : Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
  • ASTM B827 : Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
  • ASTM B828 : Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube andFittings
  • ASTM B829 : Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
  • ASTM B830 : Specification for Uniform Test Methods and Frequency
  • ASTM B831 : Test Method for Shear Testing of Thin Aluminum Alloy Products
  • ASTM B832 : Guide for Electroforming with Nickel and Copper
  • ASTM B833 : Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the CorrosionProtection of Steel
  • ASTM B834 : Specification for Pressure Consolidated Powder Metallurgy Iron Nickel ChromiumMolybdenum (UNS N08367) and Nickel Chromium Molybdenum Columbium (Nb) (UNS N06625) AlloyPipe Flanges, Fittings, Valves, and Parts
  • ASTM B835 : Specification for Compact Round Stranded Copper Conductors Using Single Input WireConstruction
  • ASTM B83-52 : Specification for Drawn or Rolled Alloy, 60 Percent Nickel, 16 Percent Chromium, and Balance Iron, for Electrical-Heating Elements (Withdrawn 1957)
  • ASTM B836 : Specification for Compact Round Stranded Aluminum Conductors Using Single Input WireConstruction
  • ASTM B839 : Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles,
  • ASTM B84 : Test Method for Temperature Resistance Constants of Alloy Wires for Precision Resistors
  • ASTM B840 : Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
  • ASTM B841 : Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
  • ASTM B842 : Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
  • ASTM B843 : Specification for Magnesium Alloy Anodes for Cathodic Protection
  • ASTM B844 : Guide for Silver Tin Oxide Contact Material
  • ASTM B845 : Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
  • ASTM B847-94 : Specification for Tinned Hard-Drawn and Medium-Hard/Drawn Copper Wire for Electrical Purposes
  • ASTM B848 : Specification for Powder Forged (P/F) Ferrous Materials
  • ASTM B849 : Specification for Pre Treatments of Iron or Steel for Reducing Risk of HydrogenEmbrittlement
  • ASTM B85 : Specification for Aluminum Alloy Die Castings
  • ASTM B850 : Guide for Post Coating Treatments of Steel for Reducing the Risk of HydrogenEmbrittlement
  • ASTM B851 : Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel,
  • ASTM B851-94 : Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish (Withdrawn 2004)
  • ASTM B852 : Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot Dip Galvanizing ofSheet Steel
  • ASTM B853 : Specification for Powder Metallurgy (P/M) Boron Stainless Steel Structural Components
  • ASTM B854 : Guide for Measuring Electrical Contact Intermittences
  • ASTM B855 : Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
  • ASTM B856 : Specification for Concentric Lay Stranded Aluminum Conductors, Coated Steel Supported(ACSS)
  • ASTM B857 : Specification for Shaped Wire Compact Concentric Lay Stranded Aluminum Conductors, Coated Steel Supported (ACSS/TW)
  • ASTM B858 : Test Method for Ammonia Vapor Test for Determination Susceptibility to Stress CorrosionCracking in Copper Alloys
  • ASTM B859 : Practice for De Agglomeration of Refractory Metal Powders and Their Compounds Prior toParticle Size Analysis
  • ASTM B86 : Specification for Zinc and Zinc Aluminum (ZA) Alloy Foundry and Die Castings
  • ASTM B860 : Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
  • ASTM B861 : Specification for Titanium and Titanium Alloy Seamless Pipe
  • ASTM B862 : Specification for Titanium and Titanium Alloy Welded Pipe
  • ASTM B863 : Specification for Titanium and Titanium Alloy Wire
  • ASTM B864/B864M : Specification for Corrugated Aluminum Box Culverts
  • ASTM B865 : Specification for Precipitation Hardening Nickel Copper Aluminum Alloy (UNS N05500) Bar,
  • ASTM B866 : Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by PolysulfideImmersion
  • ASTM B867 : Specification for Electrodeposited Coatings of Palladium Nickel for Engineering Use
  • ASTM B868 : Practice for Contact Performance Classification of Electrical Connection Systems
  • ASTM B869 : Specification for Copper Clad Steel Electrical Conductor for CATV Drop Wire
  • ASTM B870 : Specification for Copper Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500and C17510)
  • ASTM B871 : Test Method for Tear Testing of Aluminum Alloy Products
  • ASTM B872 : Specification for Precipitation Hardening Nickel Iron Chromium Columbium (Nb) TitaniumAluminum Alloy (UNS N09908) Plate, Sheet, and Strip
  • ASTM B873 : Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
  • ASTM B87-32 : Specification for Hard-Drawn Copper Transmission Cable (Withdrawn 1937)
  • ASTM B874 : Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
  • ASTM B875 : Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
  • ASTM B876-96 : Specification for Borated Dispersion Strengthened Copper Plate, Sheet, Strip, and Rolled Bar for Nuclear Application (Withdrawn 2002)
  • ASTM B877 : Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by thePhosphomolybdic Acid (PMA) Method
  • ASTM B878 : Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
  • ASTM B879 : Practice for Applying Non Electrolytic Conversion Coatings on Magnesium and MagnesiumAlloys
  • ASTM B88 : Specification for Seamless Copper Water Tube
  • ASTM B880 : Specification for General Requirements for Chemical Check Analysis Limits for Nickel, NickelAlloys, and Cobalt Alloys
  • ASTM B881 : Terminology Relating to Aluminum and Magnesium Alloy Products
  • ASTM B882 : Specification for Pre Patinated Copper for Architectural Applications
  • ASTM B883 : Specification for Metal Injection Molding (MIM) Ferrous Materials
  • ASTM B884 : Specification for Niobium Titanium Alloy Billets, Bar, and Rod for SuperconductingApplications
  • ASTM B885 : Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
  • ASTM B887 : Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
  • ASTM B888 : Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or SpringContacts
  • ASTM B889 : Specification for Solid Hard Drawn Aluminum Wire for Electrical Purposes (Withdrawn 2003) No Replacement
  • ASTM B889-98 : Specification for Solid Hard-Drawn Aluminum Wire for Electrical Purposes (Withdrawn 2003)
  • ASTM B88M : Specification for Seamless Copper Water Tube [Metric]
  • ASTM B890 : Test Method for Determination of Metallic Constituents of Tungsten Alloys and TungstenHardmetals by X Ray Fluorescence Spectrometry
  • ASTM B891 : Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and HeatExchanger Tubes With Integral Fins
  • ASTM B892 : Specification for ACuZinc5 (Zinc Copper Aluminum) Alloy in Ingot Form for Die Castings
  • ASTM B893 : Specification for Hard Coat Anodizing of Magnesium for Engineering Applications
  • ASTM B894 : Specification for ACuZinc5 (Zinc Copper Aluminum) Alloy Die Castings
  • ASTM B89-44 : Specification for Aluminum and Aluminum-Alloy Bars, Rods, and Wire (Withdrawn 1945)
  • ASTM B895 : Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M)
  • ASTM B896 : Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
  • ASTM B898 : Specification for Reactive and Refractory Metal Clad Plate
  • ASTM B9 : Specification for Bronze Trolley Wire
  • ASTM B90/B90M : Specification for Magnesium Alloy Sheet and Plate
  • ASTM B900 : Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. GovernmentAgencies
  • ASTM B901 : Specification for Compressed Round Stranded Aluminum Conductors Using Single Input WireConstruction
  • ASTM B902 : Specification for Compressed Round Stranded Copper Conductors, Hard, Medium Hard, orSoft Using Single Input Wire Construction
  • ASTM B903 : Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
  • ASTM B904 : Specification for Autocatalytic Nickel over Autocatalytic Copper for ElectromagneticInterference Shielding
  • ASTM B905 : Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by theMechanized Tape Test
  • ASTM B906 : Specification for General Requirements for Flat Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
  • ASTM B907 : Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
  • ASTM B908 : Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
  • ASTM B909 : Guide for Plane Strain Fracture Toughness Testing of Non Stress Relieved AluminumProducts
  • ASTM B90M-90 : Specification for Magnesium-Alloy Sheet and Plate (Metric) (Withdrawn 1993)
  • ASTM B91 : Specification for Magnesium Alloy Forgings
  • ASTM B910/B910M : Specification for Annealed Copper Clad Steel Wire
  • ASTM B911/B911M : Specification for ACSR Twisted Pair Conductor (ACSR/TP)
  • ASTM B912 : Specification for Passivation of Stainless Steels Using Electropolishing
  • ASTM B913 : Test Method for Evaluation of Crimped Electrical Connections to 16 Gauge and SmallerDiameter Stranded and Solid Conductors
  • ASTM B914 : Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot Dip Galvanizing of Steel
  • ASTM B915 : Test Method for Measuring the Static Heat Resistance of a Self Cleaning Oven Coating
  • ASTM B916 : Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
  • ASTM B917/B917M : Practice for Heat Treatment of Aluminum Alloy Castings from All Processes
  • ASTM B918 : Practice for Heat Treatment of Wrought Aluminum Alloys
  • ASTM B919 : Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
  • ASTM B92/B92M : Specification for Unalloyed Magnesium Ingot and Stick For Remelting
  • ASTM B920 : Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors ofSodium Hypochlorite Solution
  • ASTM B921 : Specification for Non hexavalent Chromium Conversion Coatings on Aluminum andAluminum Alloys
  • ASTM B923 : Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
  • ASTM B924 : Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger TubesWith Integral Fins
  • ASTM B925 : Practices for Production and Preparation of Powder Metallurgy (P/M) Test Specimens
  • ASTM B926 : Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of aLight Table
  • ASTM B927 : Specification for Brass Rod, Bar, and Shapes
  • ASTM B928/B928M : Specification for High Magnesium Aluminum Alloy Sheet and Plate for Marine Service
  • ASTM B929 : Specification for Copper Nickel Tin Spinodal Alloy Rod and Bar
  • ASTM B92M-83 : Specification for Magnesium Ingot and Stick for Remelting (Metric) (Withdrawn 1988)
  • ASTM B93/B93M : Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent MoldCastings, and Die Castings
  • ASTM B930 : Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in CementedTungsten Carbides (Hardmetals)
  • ASTM B931 : Test Method for Metallographically Estimating the Observed Case Depth of Ferrous PowderMetallurgy (P/M) Parts
  • ASTM B932 : Specification for Low Carbon Nickel Chromium Molybdenum Gadolinium Alloy Plate, Sheet, and Strip
  • ASTM B933 : Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
  • ASTM B934 : Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts UsingMicroindentation Hardness Measurements
  • ASTM B935 : Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
  • ASTM B936 : Specification for Copper Chrome Iron Titanium Alloy Plate, Sheet, Strip and Rolled Bar
  • ASTM B937 : Specification for Copper Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
  • ASTM B938 : Specification for Copper Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 andC17510)
  • ASTM B939 : Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings andStructural Materials
  • ASTM B93M-88 : Specification for Magnesium Alloys Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings (Metric) (Withdrawn 1990)
  • ASTM B94 : Specification for Magnesium Alloy Die Castings
  • ASTM B940 : Practice for Testing Non Chromate Coatings on Zinc and Cadmium Surfaces
  • ASTM B941 : Specification for Heat Resistant Aluminum Zirconium Alloy Wire for Electrical Purposes
  • ASTM B942 : Guide for Specification and Quality Assurance for the Electrical Contact Performance ofCrimped Wire Terminations
  • ASTM B943 : Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
  • ASTM B944 : Specification for Copper Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
  • ASTM B945 : Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature ShapingProcess for Production of T1, T2, T5 and T10 Type Tempers
  • ASTM B947 : Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
  • ASTM B95-39 : Method of Linear Expansion of Metals (Withdrawn 1984)
  • ASTM B958 : Specification for Extra-High-Strength and Ultra-High-Strength Class AZinc/5% Aluminum-
  • ASTM B96/B96M : Specification for Copper Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposesand Pressure Vessels
  • ASTM B96M-93a : Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels [Metric] (Withdrawn 1999)
  • ASTM B97-81 : Specification for Copper-Silicon Alloy Plate, Sheet Strip and Rolled Bar for General Purposes (Withdrawn 1981)
  • ASTM B98/B98M : Specification for Copper Silicon Alloy Rod, Bar and Shapes
  • ASTM B98M-93 : Specification for Copper-Silicon Alloy Rod, Bar, and Shapes [Metric] (Withdrawn 1998)
  • ASTM B99/B99M : Specification for Copper Silicon Alloy Wire for General Applications
  • ASTM B99M-94 : Specification for Copper-Silicon Alloy Wire for General Applications [Metric] (Withdrawn 1996)