You are here: [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | » ASTM F 0XXX

ASTM F 0XXX

  • ASTM F0001-03 : Specification for Nickel-Clad and Nickel-Plated Steel Strip for Electron Tubes

  • ASTM F0003-02A : Specification for Nickel Strip for Electron Tubes

  • ASTM F0004-66R05 : Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes

  • ASTM F0007-95R00 : Specification for Aluminum Oxide Powder

  • ASTM F0014-80R00 : Practice for Making and Testing Reference Glass-Metal Bead-Seal

  • ASTM F0015-04 : Specification for Iron-Nickel-Cobalt Sealing Alloy

  • ASTM F0016-67R00 : Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps

  • ASTM F0017-02 : Terminology Relating to Flexible Barrier Materials

  • ASTM F0018-64R00 : Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices

  • ASTM F0019-64R05E01 : Test Method for Tension and Vacuum Testing Metallized Ceramic Seals

  • ASTM F0021-65R02 : Test Method for Hydrophobic Surface Films by the Atomizer Test

  • ASTM F0022-02 : Test Method for Hydrophobic Surface Films by the Water-Break Test

  • ASTM F0024-04 : Test Method for Measuring and Counting Particulate Contamination on Surfaces

  • ASTM F0025-04 : Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas

  • ASTM F0026 : Test Methods for Determining the Orientation of a Semiconductive Single Crystal

  • ASTM F0028 : Test Methods for Minority-Carrier Lifetime in Bulk Germanium and Silicon by Measurement of Photoconductivity Decay

  • ASTM F0029-97R02 : Specification for Dumet Wire for Glass-to-Metal Seal Applications

  • ASTM F0030-96R02 : Specification for Iron-Nickel Sealing Alloys

  • ASTM F0031-05 : Specification for 42 \% Nickel-6 \% Chromium-Iron Sealing Alloy

  • ASTM F0034-02 : Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials

  • ASTM F0036-99R03 : Test Method for Compressibility and Recovery of Gasket Materials

  • ASTM F0037-00 : Test Methods for Sealability of Gasket Materials

  • ASTM F0038-00 : Test Methods for Creep Relaxation of a Gasket Material

  • ASTM F0042 : Test Methods for Conductivity Type of Extrinsic Semiconducting Materials

  • ASTM F0043 : Test Methods for Resistivity of Semiconductor Materials

  • ASTM F0044-95R00 : Specification for Metallized Surfaces on Ceramic

  • ASTM F0050-92R01E01 : Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles

  • ASTM F0051-00R02E01 : Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments

  • ASTM F0067-00 : Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700),

  • ASTM F0068-99R04 : Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices

  • ASTM F0071 : Practice for Using the Morphological Key for the Rapid Identification of Fibers for Contamination Control in Electron Devices and Microelectronics

  • ASTM F0072-95R01 : Specification for Gold Wire for Semiconductor Lead Bonding

  • ASTM F0073-96R02 : Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps

  • ASTM F0075-01 : Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)

  • ASTM F0076-86R02 : Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors

  • ASTM F0078-97R02 : Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards

  • ASTM F0079-69R00 : Specification for Type 101 Sealing Glass

  • ASTM F0081 : Test Method for Measuring Radial Resistivity Variation on Silicon Wafers

  • ASTM F0083-71R02 : Practice for Definition and Determination of Thermionic Constants of Electron Emitters

  • ASTM F0084 : Test Method for Measuring Resistivity of Silicon Wafers With an In-Line Four-Point Probe

  • ASTM F0085-76R02 : Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes

  • ASTM F0086-04 : Practice for Surface Preparation and Marking of Metallic Surgical Implants

  • ASTM F0088-00 : Test Method for Seal Strength of Flexible Barrier Materials

  • ASTM F0090-01 : Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)

  • ASTM F0091-70R01E01 : Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector

  • ASTM F0092-93R03 : Practice for Determination of Character Yield of Inked Fabric Typewriter and Printer Ribbons

  • ASTM F0095 : Test Method for Thickness of Lightly Doped Silicon Epitaxial Layers on Heavily Doped Silicon Substrates Using an Infrared Dispersive Spectrophotometer

  • ASTM F0096-77R05 : Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms

  • ASTM F0097-72R02E01 : Practices for Determining Hermeticity of Electron Devices by Dye Penetration

  • ASTM F0099-76R01 : Practice for Preparation of Flexible Barrier Material Specifications

  • ASTM F0104-03 : Classification System for Nonmetallic Gasket Materials

  • ASTM F0105-72R00 : Specification for Type 58 Borosilicate Sealing Glass

  • ASTM F0106-00 : Specification for Brazing Filler Metals for Electron Devices

  • ASTM F0109-04 : Terminology Relating to Surface Imperfections on Ceramics

  • ASTM F0110 : Test Method for Thickness of Epitaxial or Diffused Layers in Silicon by the Angle Lapping and Staining Technique

  • ASTM F0111-96R02 : Practice for Determining Barium Yield, Getter Gas Content, and Getter Sorption Capacity for Barium Flash Getters

  • ASTM F0112-00 : Test Method for Sealability of Enveloped Gaskets

  • ASTM F0116-00R04 : Specification for Medical Screwdriver Bits

  • ASTM F0118-04 : Definitions of Terms Relating to Gaskets

  • ASTM F0119-82R02 : Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)

  • ASTM F0129-97R02 : Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than Fabric Type

  • ASTM F0136-02A : Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)

  • ASTM F0137-03 : Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus

  • ASTM F0138-03 : Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

  • ASTM F0139-03 : Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)

  • ASTM F0140-98R03 : Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods

  • ASTM F0141-04 : Terminology Relating to Resilient Floor Coverings

  • ASTM F0142-93R00E01 : Test Method for Indentation of Resilient Floor Tiles (McBurney Test)

  • ASTM F0144-80R00 : Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods

  • ASTM F0145-72R03 : Practice for Evaluating Flat-Faced Gasketed Joint Assemblies

  • ASTM F0146-04 : Test Methods for Fluid Resistance of Gasket Materials

  • ASTM F0147-87R03 : Test Method for Flexibility of Non-Metallic Gasket Materials

  • ASTM F0148-02 : Test Method for Binder Durability of Cork Composition Gasket Materials

  • ASTM F0149-92BR03 : Terminology Relating to Optical Character Recognition

  • ASTM F0150-98 : Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring

  • ASTM F0151 : Test Method for Residual Solvents in Flexible Barrier Materials

  • ASTM F0152-95R02 : Test Methods for Tension Testing of Nonmetallic Gasket Materials

  • ASTM F0153-95R02 : Test Method for Determining the Yield of Wide Inked Computer Ribbons

  • ASTM F0154 : Guide for Identification of Structures and Contaminants Seen on Specular Silicon Surfaces

  • ASTM F0180-94R05 : Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices

  • ASTM F0204-76R02 : Test Method for Surface Flaws in Tungsten Seal Rod and Wire

  • ASTM F0205-94R05 : Test Method for Measuring Diameter of Fine Wire by Weighing

  • ASTM F0218-95R00 : Test Method for Analyzing Stress in Glass

  • ASTM F0219-96R02 : Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps

  • ASTM F0221-98R03 : Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom

  • ASTM F0256-05 : Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium

  • ASTM F0269-60R02 : Test Method for Sag of Tungsten Wire

  • ASTM F0288-96R02 : Specification for Tungsten Wire for Electron Devices and Lamps

  • ASTM F0289-96R02 : Specification for Molybdenum Wire and Rod for Electronic Applications

  • ASTM F0290-94R05 : Specification for Round Wire for Winding Electron Tube Grid Laterals

  • ASTM F0302-04 : Practice for Field Sampling of Aerospace Fluids in Containers

  • ASTM F0303-02 : Practices for Sampling for Particles in Aerospace Fluids and Components

  • ASTM F0307-02 : Practice for Sampling Pressurized Gas for Gas Analysis

  • ASTM F0309-04 : Practice for Liquid Sampling of Noncryogenic Aerospace Propellants

  • ASTM F0310-04 : Practice for Sampling Cryogenic Aerospace Fluids

  • ASTM F0311-97R02 : Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters

  • ASTM F0312-97R03 : Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters

  • ASTM F0316-03 : Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test

  • ASTM F0318-04 : Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids

  • ASTM F0319-91AR03 : Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements

  • ASTM F0320-05 : Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures

  • ASTM F0326-96R01E02 : Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes

  • ASTM F0327-78R00 : Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method

  • ASTM F0328-98R03 : Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical Particles

  • ASTM F0330-89R04 : Test Method for Bird Impact Testing of Aerospace Transparent Enclosures

  • ASTM F0331-00 : Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)

  • ASTM F0335-03 : Terminology Relating to Electrostatic Imaging

  • ASTM F0336-02 : Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service

  • ASTM F0355-01 : Test Method for Shock-Absorbing Properties of Playing Surface Systems and Materials

  • ASTM F0357-78R02 : Practice for Determining Solderability of Thick Film Conductors

  • ASTM F0358-83R02 : Test Method for Wavelength of Peak Photoluminescence and the Corresponding Composition of Gallium Arsenide Phosphide Wafers

  • ASTM F0359 : Practice for Static Immersion Testing of Unstressed Materials in Nitrogen Tetroxide (NO)

  • ASTM F0360-82R01 : Practice for Image Evaluation of Electrostatic Business Copies

  • ASTM F0362-91R00E01 : Test Method for Determining the Erasability of Inked Ribbons

  • ASTM F0363-99R04 : Test Method for Corrosion Testing of Gaskets

  • ASTM F0364-96R02 : Specification for Molybdenum Flattened Wire for Electron Tubes

  • ASTM F0366-04 : Specification for Fixation Pins and Wires

  • ASTM F0370 : Specification for Proximal Femoral Endoprosthesis

  • ASTM F0371 : Test Method for Compatibility of Materials with Liquid Oxygen (Reaction Intensity Method)

  • ASTM F0372-99R03 : Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique

  • ASTM F0373-01 : Test Method for Embossed Depth of Resilient Floor Coverings

  • ASTM F0374 : Test Method for Sheet Resistance of Silicon Epitaxial, Diffused, Polysilicon, and Ion-implanted Layers Using an In-Line Four-Point Probe with the Single-Configuration Procedure

  • ASTM F0375-89R05 : Specification for Integrated Circuit Lead Frame Material

  • ASTM F0377-03 : Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires

  • ASTM F0381-04 : Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines

  • ASTM F0382-99R03E01 : Specification and Test Method for Metallic Bone Plates

  • ASTM F0384-00 : Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices

  • ASTM F0386-02 : Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces

  • ASTM F0387-02 : Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer

  • ASTM F0390-98R03 : Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array

  • ASTM F0391 : Test Methods for Minority Carrier Diffusion Length in Extrinsic Semiconductors by Measurement of Steady-State Surface Photovoltage

  • ASTM F0392-93R04 : Test Method for Flex Durability of Flexible Barrier Materials

  • ASTM F0395-03 : Terminology Relating to Vacuum Cleaners

  • ASTM F0396-00R04 : Practice for Comparing One-Time Noncorrectable Typewriter Ribbons

  • ASTM F0397 : Test Method for Resistivity of Silicon Bars Using a Two-Point Probe

  • ASTM F0398 : Test Method for Majority Carrier Concentration in Semiconductors by Measurement of Wavenumber or Wavelength of the Plasma Resonance Minimum

  • ASTM F0400-04 : Consumer Safety Specification for Lighters

  • ASTM F0402-93R99 : Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

  • ASTM F0403-98 : Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using Highway Vehicles

  • ASTM F0404-04 : Consumer Safety Specification for High Chairs

  • ASTM F0405-97 : Specification for Corrugated Polyethylene (PE) Pipe and Fittings

  • ASTM F0406-05 : Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards

  • ASTM F0408-99 : Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer

  • ASTM F0409-02 : Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

  • ASTM F0410-02 : Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement

  • ASTM F0412-01AE01 : Terminology Relating to Plastic Piping Systems

  • ASTM F0413 : Practice for Preparation of an Offset Duplicator for Use in Functional Testing of Lithographic Copy Products

  • ASTM F0414-00 : Test Method for Energy Absorbed by a Tire When Deformed by a Slow-Moving Plunger

  • ASTM F0415-87R00E01 : Test Method for Curl in Carbon Paper

  • ASTM F0418-77R02 : Practice for Preparation of Samples of the Constant Composition Region of Epitaxial Gallium Arsenide Phosphide for Hall Effect Measurements

  • ASTM F0420-04 : Test Method for Access Depth Under Furniture of Vacuum Cleaners

  • ASTM F0421-00 : Test Method for Measuring Groove and Void Depth in Passenger Car Tires

  • ASTM F0423 : Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges

  • ASTM F0424-98 : Test Method for Tires for Wet Driving Traction in Straight-Ahead Motion Using Highway Vehicles

  • ASTM F0425 : Terminology Relating to Lithographic Copy Products

  • ASTM F0428-03A : Test Method for Intensity of Scratches on Aerospace Glass Enclosures

  • ASTM F0429-01 : Test Method for Shock-Attenuation Characteristics of Protective Headgear for Football

  • ASTM F0430-05 : Test Methods for Paper Used for Vacuum Cleaner Filter Bags

  • ASTM F0431-04 : Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners

  • ASTM F0432-04 : Specification for Roof and Rock Bolts and Accessories

  • ASTM F0433-02 : Practice for Evaluating Thermal Conductivity of Gasket Materials

  • ASTM F0434-93R03 : Test Method for Blow-Out Testing of Preformed Gaskets

  • ASTM F0436-04 : Specification for Hardened Steel Washers

  • ASTM F0436M-04 : Specification for Hardened Steel Washers \[Metric\]

  • ASTM F0437-99 : Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

  • ASTM F0438-04 : Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

  • ASTM F0439-02E01 : Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

  • ASTM F0441/F0441M-02 : Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

  • ASTM F0442/F0442M-99 : Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR\NPR)

  • ASTM F0444-88R04E01 : Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas

  • ASTM F0445-88R04E01 : Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas

  • ASTM F0446-85R04E01 : Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area

  • ASTM F0448-99R05 : Test Method for Measuring Steady-State Primary Photocurrent

  • ASTM F0449-02E01 : Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control

  • ASTM F0450-01 : Test Methods for Vacuum Cleaner Hose\MDurability and Reliability (Plastic Wire Reinforced)

  • ASTM F0451-99AE01 : Specification for Acrylic Bone Cement

  • ASTM F0452-76R02 : Specification for Preformed Cranioplasty Plates

  • ASTM F0457-04 : Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation

  • ASTM F0458-84R01 : Practice for Nondestructive Pull Testing of Wire Bonds

  • ASTM F0459-84R01 : Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds

  • ASTM F0462-79R99 : Consumer Safety Specification for Slip-Resistant Bathing Facilities

  • ASTM F0467-03A : Specification for Nonferrous Nuts for General Use

  • ASTM F0467M-03A : Specification for Nonferrous Nuts for General Use \[Metric\]

  • ASTM F0468-03A : Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use

  • ASTM F0468M-03A : Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use \[Metric\]

  • ASTM F0470-89R03 : Practice for Caking Temperature of Dry Electrostatic Toner

  • ASTM F0471-76R02 : Terminology Relating to Combination Locks

  • ASTM F0472-92R98 : Terminology for Geometry of Alpine Skis

  • ASTM F0473-96R03 : Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings

  • ASTM F0474 : Specification for Static Screw-Retention Strength of Binding Mounting Area on Alpine Skis

  • ASTM F0475 : Specification for Test Screw Used in Screw-Retention Test of Binding Mounting Area on Alpine Skis

  • ASTM F0476-84R02 : Test Methods for Security of Swinging Door Assemblies

  • ASTM F0477-02E01 : Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

  • ASTM F0478-92R99 : Specification for In-Service Care of Insulating Line Hose and Covers

  • ASTM F0479-95R01 : Specification for In-Service Care of Insulating Blankets

  • ASTM F0480-02 : Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80

  • ASTM F0481-97R02 : Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields

  • ASTM F0482-03 : Test Method for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals

  • ASTM F0483-98R02E01 : Test Method for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals

  • ASTM F0484-02 : Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds

  • ASTM F0485-02 : Test Method for Effects of Cleaners on Unpainted Aircraft Surfaces

  • ASTM F0486-01 : Practice for Preparation of Use and Care Booklets for Vacuum Cleaners

  • ASTM F0487-88R01 : Specification for Fine Aluminum\N1 \% Silicon Wire for Semiconductor Lead-Bonding

  • ASTM F0488 : Test Method for On-Site Screening of Heterotrophic Bacteria in Water

  • ASTM F0489 : Test Method for Using a James Machine

  • ASTM F0491 : Specification for Poly(Vinylidene Fluoride) (PVDF) Plastic-Lined Ferrous Metal Pipe and Fittings

  • ASTM F0492 : Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings

  • ASTM F0493-04 : Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

  • ASTM F0494-05 : Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners

  • ASTM F0495-99AR04 : Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures

  • ASTM F0496-02AE01 : Specification for In-Service Care of Insulating Gloves and Sleeves

  • ASTM F0497-00R04 : Practice for Use of the Electric and Electronic Typewriter as a Test Instrument

  • ASTM F0498-77R98 : Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis

  • ASTM F0502-02 : Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces

  • ASTM F0504-05 : Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings

  • ASTM F0505-87R01 : Practice for the Comparative Evaluation of the Imaging Properties of Liquid Electrostatic Toners

  • ASTM F0506 : Practice for Assessing the Quality of Direct-Image Paper Offset Masters

  • ASTM F0508-77R02 : Practice for Specifying Thick-Film Pastes

  • ASTM F0509-86R04 : Practice for Testing One-Time Carbonizing Tissue for Pinholes

  • ASTM F0510-93R04 : Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method

  • ASTM F0511-04 : Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile

  • ASTM F0512-95R01E01 : Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation

  • ASTM F0513-00 : Safety Specification for Eye and Face Protective Equipment for Hockey Players

  • ASTM F0519-05 : Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments

  • ASTM F0520-97R04 : Test Method for Environmental Resistance of Aerospace Transparencies

  • ASTM F0521-83R04 : Test Methods for Bond Integrity of Transparent Laminates

  • ASTM F0523 : Practice for Unaided Visual Inspection of Polished Silicon Wafer Surfaces

  • ASTM F0525 : Test Method for Measuring Resistivity of Silicon Wafers Using a Spreading Resistance Probe

  • ASTM F0526-97R03 : Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests

  • ASTM F0528-99R05 : Test Method of Measurement of Common-Emitter DC Current Gain of Junction Transistors

  • ASTM F0533 : Test Method for Thickness and Thickness Variation of Silicon Wafers

  • ASTM F0534 : Test Method for Bow of Silicon Wafers

  • ASTM F0536 : Test Method for Size of Resilient Floor Tile by Dial Gage Method

  • ASTM F0537-01 : Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials

  • ASTM F0538-03 : Terminology Relating to the Characteristics and Performance of Tires

  • ASTM F0539-01 : Practice for Fitting Athletic Footwear

  • ASTM F0540 : Test Method for Squareness of Resilient Floor Tile by Gage Method

  • ASTM F0541-04 : Specification for Alloy Steel Eyebolts

  • ASTM F0542-02 : Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation

  • ASTM F0543-02 : Specification and Test Methods for Metallic Medical Bone Screws

  • ASTM F0545 : Specification for PVC and ABS Injected Solvent Cemented Plastic Pipe Joints

  • ASTM F0546 : Specification for Perfluoro (Ethylene-Propylene) Copolymer (FEP) Plastic-Lined Ferrous Metal Pipe and Fittings

  • ASTM F0547-01 : Terminology of Nails for Use with Wood and Wood-Base Materials

  • ASTM F0548-03AE01 : Test Method for Intensity of Scratches on Aerospace Transparent Plastics

  • ASTM F0549-85R04 : Terminology Relating to Carbonless Copy Products

  • ASTM F0550 : Test Method for Lithographic Properties of Imaging Materials

  • ASTM F0551-89R00 : Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires

  • ASTM F0552-02 : Terminology Relating to Chain Link Fencing

  • ASTM F0555-01 : Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner

  • ASTM F0556-88R01 : Test Method for Curl of Carbonless Copy Papers

  • ASTM F0558-03 : Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners

  • ASTM F0559-95R00 : Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel

  • ASTM F0560-05 : Specification for Unalloyed Tantalum for Surgical Implant Applications(UNS R05200, UNS R05400)

  • ASTM F0561-05 : Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

  • ASTM F0562-02 : Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)

  • ASTM F0563 : Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications (UNS R30563)

  • ASTM F0564-02 : Specification and Test Methods for Metallic Bone Staples

  • ASTM F0565-04 : Practice for Care and Handling of Orthopedic Implants and Instruments

  • ASTM F0567-00 : Practice for Installation of Chain-Link Fence

  • ASTM F0568M-04 : Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners

  • ASTM F0571-87R01 : Practice for Installation of Exit Devices in Security Areas

  • ASTM F0576 : Test Method for Measurement of Insulator Thickness and Refractive Index on Silicon Substrates by Ellipsometry

  • ASTM F0577-03E01 : Test Method for Particle Size Measurement of Dry Toners

  • ASTM F0584-87R99 : Practice for Visual Inspection of Semiconductor Lead-Bonding Wire

  • ASTM F0585-94R00 : Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers

  • ASTM F0588-04 : Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact

  • ASTM F0589-00 : Consumer Safety Specification for Non-Powder Guns

  • ASTM F0590-92R00 : Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants

  • ASTM F0592-84R01 : Terminology of Collated and Cohered Fasteners and Their Application Tools

  • ASTM F0593-02E02 : Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

  • ASTM F0594-02 : Specification for Stainless Steel Nuts

  • ASTM F0595-01 : Test Methods for Vacuum Cleaner Hose\MDurability and Reliability (All-Plastic Hose)

  • ASTM F0596-82R03 : Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners

  • ASTM F0597-83R03 : Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter

  • ASTM F0598-00R04 : Practice for Determining the Resistance of Carbonless Papers to Capsular Damage

  • ASTM F0599 : Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings

  • ASTM F0601-03 : Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants

  • ASTM F0602-98AR03 : Criteria for Implantable Thermoset Epoxy Plastics

  • ASTM F0603-00 : Specification for High-Purity Dense Aluminum Oxide for Medical Application

  • ASTM F0605-88R01 : Practice for Determining the Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set

  • ASTM F0606-02E01 : Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets

  • ASTM F0606M-02 : Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets \[Metric\]

  • ASTM F0607-03 : Test Method for Adhesion of Gasket Materials to Metal Surfaces

  • ASTM F0608-03 : Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners

  • ASTM F0609-96E01 : Test Method for Using a Horizontal Pull Slipmeter (HPS)

  • ASTM F0610/F0610M-00A : Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique

  • ASTM F0615M-95R02 : Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components \[Metric\]

  • ASTM F0616M-96R03 : Test Method for Measuring MOSFET Drain Leakage Current \[Metric\]

  • ASTM F0617-00 : Test Method for Measuring MOSFET Linear Threshold Voltage

  • ASTM F0619-03 : Practice for Extraction of Medical Plastics

  • ASTM F0620-00 : Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants

  • ASTM F0621-02 : Specification for Stainless Steel Forgings for Surgical Implants

  • ASTM F0622-79R02 : Specification for Preformed Cranioplasty Plates That Can Be Altered

  • ASTM F0623-99E01 : Performance Specification for Foley Catheter

  • ASTM F0624-98AR03 : Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications

  • ASTM F0625-94R00 : Practice for Classifying Water Bodies for Spill Control Systems

  • ASTM F0626-96AR03 : Specification for Fence Fittings

  • ASTM F0627-99R03 : Practice for Testing Flake of Single-Strike Film Typewriter Ribbons

  • ASTM F0628-01 : Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

  • ASTM F0629-02 : Practice for Radiography of Cast Metallic Surgical Implants

  • ASTM F0631-99 : Guide for Collecting Skimmer Performance Data in Controlled Environments

  • ASTM F0637-85R01 : Specification for Format, Physical Properties, and Test Methods for 19 and 35 mm Testable Tape Carrier for Perimeter Tape Carrier-Bonded Semiconductor Devices

  • ASTM F0638-88R01 : Specification for Fine Aluminum\M1 \% Magnesium Wire for Semiconductor Lead-Bonding

  • ASTM F0639-98AR03 : Specification for Polyethylene Plastics for Medical Applications

  • ASTM F0640-79R00 : Test Methods for Radiopacity of Plastics for Medical Use

  • ASTM F0641-98AR03 : Specification for Implantable Epoxy Electronic Encapsulants

  • ASTM F0645-04 : Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

  • ASTM F0647-94R00 : Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application

  • ASTM F0648-04 : Specification for Ultra-High-Molecular Weight Polyethylene Powder and Fabricated Form for Surgical Implants

  • ASTM F0649-01 : Practice for Secondary Calibration of Airborne Particle Counter Using Comparison Procedures

  • ASTM F0653 : Test Method for Evaluation of Electrostatic Masters

  • ASTM F0654-03 : Specification for Residential Chain Link Fence Gates

  • ASTM F0655-03 : Specification for Test Carpets and Pads for Vacuum Cleaner Testing

  • ASTM F0656-02 : Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

  • ASTM F0657 : Test Method for Measuring Warp and Total Thickness Variation on Silicon Wafers by Noncontact Scanning

  • ASTM F0658-00A : Practice for Calibration of a Liquid-Borne Particle Counter Using an Optical System Based Upon Light Extinction

  • ASTM F0659-98E01 : Specification for Skier Goggles and Faceshields

  • ASTM F0660-83R02E01 : Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters

  • ASTM F0665-98R03 : Classification for Vinyl Chloride Plastics Used in Biomedical Application

  • ASTM F0667-97 : Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings

  • ASTM F0668-04 : Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric

  • ASTM F0670-02 : Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing

  • ASTM F0671 : Test Method for Measuring Flat Length on Wafers of Silicon and Other Electronic Materials

  • ASTM F0672 : Test Method for Measuring Resistivity Profiles Perpendicular to the Surface of a Silicon Wafer Using a Spreading Resistance Probe

  • ASTM F0673 : Test Methods for Measuring Resistivity of Semiconductor Slices or Sheet Resistance of Semiconductor Films with a Noncontact Eddy-Current Gage

  • ASTM F0674 : Practice for Preparing Silicon for Spreading Resistance Measurements

  • ASTM F0676-97R03 : Test Method for Measuring Unsaturated TTL Sink Current

  • ASTM F0677-04 : Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications

  • ASTM F0679-03 : Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

  • ASTM F0680-80R02 : Test Methods for Nails

  • ASTM F0681-82R04 : Practice for Use of Branch Connections

  • ASTM F0682-82AR04 : Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings

  • ASTM F0683-03A : Practice for Selection and Application of Thermal Insulation for Piping and Machinery

  • ASTM F0685-96R01 : Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems

  • ASTM F0686-94R01 : Practice for Evaluation of Image Quality Produced by a Carbonless Copy Paper with an Electric or Electronic Typewriter

  • ASTM F0688-00 : Specification for Wrought Cobalt-35 Nickel-20 Chromium-10 Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)

  • ASTM F0689-97R04 : Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings

  • ASTM F0690-86R03E02 : Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems

  • ASTM F0692-97R02 : Test Method for Measuring Adhesion Strength of Solderable Films to Substrates

  • ASTM F0693-01 : Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers

  • ASTM F0694-02E01 : Test Method for Heel-Attaching Strength of Women’s Shoes

  • ASTM F0695-01 : Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials

  • ASTM F0696-02 : Specification for Leather Protectors for Rubber Insulating Gloves and Mittens

  • ASTM F0697-00 : Practice for Care and Use of Athletic Mouth Protectors

  • ASTM F0698-94R00 : Specification for Physical Information to be Provided for Amusement Rides and Devices

  • ASTM F0699-00E01 : Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing

  • ASTM F0700-93R02 : Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments

  • ASTM F0701-81R02 : Practice for Care and Handling of Neurosurgical Implants and Instruments

  • ASTM F0702-98AR03 : Specification for Polysulfone Resin for Medical Applications

  • ASTM F0703-96R02 : Specification for Implantable Breast Prostheses

  • ASTM F0704-81R01 : Practice for Selecting Bolting Lengths for Piping System Flanged Joints

  • ASTM F0706-96R01 : Practice for Determination of Fusion Temperature of Dry Electrostatic Heat-Fixing Toners

  • ASTM F0707/F0707M-94R01 : Specification for Modular Gage Boards

  • ASTM F0708-92R04 : Practice for Design and Installation of Rigid Pipe Hangers

  • ASTM F0710-05 : Practice for Preparing Concrete Floors to Receive Resilient Flooring

  • ASTM F0711-02 : Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools

  • ASTM F0712-88R00 : Test Methods for Electrically Insulating Plastic Guard Equipment for Protection of Workers

  • ASTM F0714-03 : Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter

  • ASTM F0715-95R02 : Test Methods for Coated Fabrics Used for Oil Spill Control and Storage

  • ASTM F0716-82R01 : Test Methods for Sorbent Performance of Absorbents

  • ASTM F0717-89R00 : Specification for Football Helmets

  • ASTM F0718-99R05 : for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet

  • ASTM F0719-81R02E01 : Practice for Testing Biomaterials in Rabbits for Primary Skin Irritation

  • ASTM F0720-81R02E01 : Practice for Testing Guinea Pigs for Contact Allergens : Guinea Pig Maximization Test

  • ASTM F0721-81R04 : Specification for Gage Piping Assemblies

  • ASTM F0722-82R04 : Specification for Welded Joints for Shipboard Piping Systems

  • ASTM F0723 : Practice for Conversion Between Resistivity and Dopant Density for Boron-Doped, Phosphorus-Doped, and Arsenic-Doped Silicon

  • ASTM F0724-94AR04 : Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance

  • ASTM F0725-03E01 : Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards

  • ASTM F0726-99 : Test Method for Sorbent Performance of Adsorbents

  • ASTM F0728 : Practice for Preparing An Optical Microscope for Dimensional Measurements

  • ASTM F0732-00 : Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses

  • ASTM F0733-90R03 : Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method

  • ASTM F0734-95R01 : Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material

  • ASTM F0735-94R01 : Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method

  • ASTM F0736-95R01 : Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight

  • ASTM F0738M-02 : Specification for Stainless Steel Metric Bolts, Screws, and Studs

  • ASTM F0739-99A : Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact

  • ASTM F0744M-97R03 : Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits \[Metric\]

  • ASTM F0745-00 : Specification for 18Chromium-12.5Nickel-2.5Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications

  • ASTM F0746-04 : Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

  • ASTM F0747-97 : Terminology Relating to Amusement Rides and Devices

  • ASTM F0748-04 : Practice for Selecting Generic Biological Test Methods for Materials and Devices

  • ASTM F0749-98R02E02 : Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit

  • ASTM F0750-87R02E01 : Practice for Evaluating Material Extracts by Systemic Injection in the Mouse

  • ASTM F0751 : Test Method for Measuring Particle Size of Wide-Size Range Dry Toners

  • ASTM F0754-00 : Specification for Implantable Polytetrafluoroethylene (PTFE) Polymer Fabricated in Sheet, Tube, and Rod Shapes

  • ASTM F0755-99R05 : Specification for Selection of Porous Polyethylene for Use in Surgical Implants

  • ASTM F0756-00 : Practice for Assessment of Hemolytic Properties of Materials

  • ASTM F0757-01 : Test Method for Determining Energy Consumption of Copier and Copier-Duplicating Equipment

  • ASTM F0758-95R00 : Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage

  • ASTM F0760-93R00 : Specification for Food Service Equipment Manuals

  • ASTM F0761 : Specification for Strength Requirements of Tubular Steel Posts and Rails for Residential Chain-Link Fence

  • ASTM F0762-94R00E01 : Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires

  • ASTM F0763-04 : Practice for Short-Term Screening of Implant Materials

  • ASTM F0764 : Practice for Compatibility of Materials with High-Energy Propellants (Impact Sensitivity Threshold Technique)

  • ASTM F0765-93R98 : Specification for Wildcats, Ship Anchor Chain

  • ASTM F0766-82R00E01 : Test Method for Melting Point of Waxes

  • ASTM F0767-98R02 : Test Method for Image Stability of Chemical Carbonless Paper to Light

  • ASTM F0769-00 : Test Method for Measuring Transistor and Diode Leakage Currents

  • ASTM F0770-93R00 : Practice for Operation Procedures for Amusement Rides and Devices

  • ASTM F0771-99E01 : Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems

  • ASTM F0773M-96R03 : Practice for Measuring Dose Rate Response of Linear Integrated Circuits \[Metric\]

  • ASTM F0778-88R01 : Methods for Gas Flow Resistance Testing of Filtration Media

  • ASTM F0779-93R98 : Test Method for Torsion Characteristic of Alpine Skis

  • ASTM F0780-93AR98 : Test Method for Linear Deformation and Breaking Strength of Alpine Skis

  • ASTM F0781 : Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings

  • ASTM F0782-01 : Specification for Doors, Furniture, Marine

  • ASTM F0783-88R03 : Specification for Staple, Handgrab, Handle, and Stirrup Rung

  • ASTM F0788/F0788M-02 : Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

  • ASTM F0789 : Specification for Type PS-46 and Type PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings

  • ASTM F0790-02 : Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

  • ASTM F0791-96R02 : Test Method for Stress Crazing of Transparent Plastics

  • ASTM F0792-01E02 : Practice for Evaluating the Imaging Performance of Security X-Ray Systems

  • ASTM F0793-93R04 : Classification of Wallcovering by Durability Characteristics

  • ASTM F0794-03 : Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

  • ASTM F0798-97R02 : Practice for Determining Gettering Rate, Sorption Capacity, and Gas Content of Nonevaporable Getters in the Molecular Flow Region

  • ASTM F0799-02 : Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)

  • ASTM F0801-96R02 : Test Method for Measuring Optical Angular Deviation of Transparent Parts

  • ASTM F0802-83R03 : Guide for Selection of Certain Walkway Surfaces When Considering Footwear Traction

  • ASTM F0803-03 : Specification for Eye Protectors for Selected Sports

  • ASTM F0806-99AR03 : Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials

  • ASTM F0807-83R03 : Practice for Determining Resolution Capability of Office Copiers

  • ASTM F0810-01 : Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields

  • ASTM F0811-02 : Practice for Accelerometer Use in Vehicles for Tire Testing

  • ASTM F0812/F0812M-03 : Specification for Surface Discontinuities of Nuts, Inch and Metric Series

  • ASTM F0813-01 : Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices

  • ASTM F0816-83R03 : Test Method for Combined Fine and Gross Leaks for Large Hybrid Microcircuit Packages

  • ASTM F0818-93R03 : Terminology Relating to Spill Response Barriers

  • ASTM F0819-05 : Terminology Relating to Electrical Protective Equipment for Workers

  • ASTM F0820-03 : Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems

  • ASTM F0821/F0821M-01 : Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

  • ASTM F0822-93R04 : Specification for Chest of Drawers (Chiffonier), Steel, Marine

  • ASTM F0823-93R04 : Specification for Desk, Log, Marine, Steel, with Cabinet

  • ASTM F0824-93R04 : Specification for Tables, Mess, Marine, Steel

  • ASTM F0825-93R04 : Specification for Drawers, Furniture, Marine, Steel

  • ASTM F0826-94R04 : Specification for Tops, Furniture, Marine, Steel

  • ASTM F0832-90R01 : Classification for Security Seals

  • ASTM F0833-05 : Consumer Safety Performance Specification for Carriages and Strollers

  • ASTM F0834-84R99 : Consumer Safety Specification for Toy Chests

  • ASTM F0835-04 : Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

  • ASTM F0835M-04 : Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws \[Metric\]

  • ASTM F0836M-02 : Specification for Style 1 Stainless Steel Metric Nuts

  • ASTM F0837-02A : Specification for Stainless Steel Socket Head Cap Screws

  • ASTM F0837M-02A : Specification for Stainless Steel Socket Head Cap Screws \[Metric\]

  • ASTM F0838-05 : Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration

  • ASTM F0839-83R98 : Specification for Cautionary Labeling of Portable Gasoline Containers for Consumer Use

  • ASTM F0840-83R03 : Specification for Ladders, Fixed, Vertical, Steel, Ship’s

  • ASTM F0841-84R98 : Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels

  • ASTM F0842-04 : Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

  • ASTM F0843-98R03 : Test Method for Assessing the Color Strength and Dispersibility of Alkali Blue Pigment in Hot Melt Carbon Copy Paper Ink

  • ASTM F0844-04 : Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

  • ASTM F0845 : Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing

  • ASTM F0846-92R03 : Guide for Testing Performance of Amusement Rides and Devices

  • ASTM F0847 : Test Methods for Measuring Crystallographic Orientation of Flats on Single Crystal Silicon Wafers by X-Ray Techniques

  • ASTM F0851-87R05 : Test Method for Self-Rising Seat Mechanisms

  • ASTM F0852-99E01 : Specification for Portable Gasoline Containers for Consumer Use

  • ASTM F0853-04 : Practice for Maintenance Procedures for Amusement Rides and Devices

  • ASTM F0854-83R03 : Test Method for Cleanliness of Carbon Paper

  • ASTM F0855-04 : Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment

  • ASTM F0856-97R04 : Practice for Mechanical Symbols, Shipboard\MHeating, Ventilation, and Air Conditioning (HVAC)

  • ASTM F0857-02 : Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Stationary Rack Type

  • ASTM F0858-02 : Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor Rack Type

  • ASTM F0859-04 : Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type

  • ASTM F0860-02 : Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type

  • ASTM F0861-94R03 : Specification for Commercial Dishwashing Racks

  • ASTM F0862-93R02 : Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids

  • ASTM F0868-02 : Classification for Laminated Composite Gasket Materials

  • ASTM F0869-01 : Terminology Relating to Athletic Shoes and Biomechanics

  • ASTM F0870-94R00 : Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements

  • ASTM F0873-84R03 : Guide for Incinerating Oil Spill Wastes at Temporary Field Locations

  • ASTM F0874-98R03 : Test Method for Temperature Measurement and Profiling for Microwave Susceptors

  • ASTM F0875-94R03 : Test Method for Evaluation of Large Area Density and Background on Office Copiers

  • ASTM F0876-04 : Specification for Crosslinked Polyethylene (PEX) Tubing

  • ASTM F0877-02A : Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems

  • ASTM F0878 : Specification For Polybuteylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing

  • ASTM F0879-02A : Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

  • ASTM F0879M-02A : Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws \[Metric\]

  • ASTM F0880-02 : Specification for Stainless Steel Socket-Set Screws

  • ASTM F0880M-02 : Specification for Stainless Steel Socket Set Screws \[Metric\]

  • ASTM F0881-94R00 : Specification for Silicone Elastomer Facial Implants

  • ASTM F0882-84R02 : Performance and Safety Specification for Cryosurgical Medical Instruments

  • ASTM F0883-04 : Performance Specification for Padlocks

  • ASTM F0884-01 : Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner

  • ASTM F0885-84R01 : Specification for Envelope Dimensions for Bronze Globe Valves NPS |n@ to 2

  • ASTM F0887-04 : Specifications for Personal Climbing Equipment

  • ASTM F0888-04 : Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner

  • ASTM F0891-04 : Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

  • ASTM F0892 : Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings

  • ASTM F0893-05 : Guide for Inspection of Amusement Rides and Devices

  • ASTM F0894-98A : Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

  • ASTM F0895-84R01E01 : Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity

  • ASTM F0897-02 : Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws

  • ASTM F0899-02 : Specification for Stainless Steels for Surgical Instruments

  • ASTM F0900-03 : Specification for Industrial and Commercial Swing Gates

  • ASTM F0901-01 : Specification for Aluminum Transmission Tower Bolts and Nuts

  • ASTM F0903-03R04 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids

  • ASTM F0904-98R03 : Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials

  • ASTM F0905-04 : Practice for Qualification of Polyethylene Saddle-Fused Joints

  • ASTM F0906-85R03 : Specification for Letters and Numerals for Ships

  • ASTM F0909-94AR01 : Terminology Relating to Printers

  • ASTM F0910-04 : Specification for Face Guards for Youth Baseball

  • ASTM F0912-04 : Specification for Alloy Steel Socket Set Screws

  • ASTM F0912M-04 : Specification for Alloy Steel Socket Set Screws \[Metric\]

  • ASTM F0913-02 : Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe

  • ASTM F0914-03 : Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments

  • ASTM F0917-91R03 : Specification for Commercial Food Waste Disposers

  • ASTM F0918-02 : Specification for Noncarbonated Mechanically Refrigerated Beverage Dispenser (Visible Product)

  • ASTM F0919-05 : Specification for Slicing Machines, Food, Electric

  • ASTM F0920-93R99 : Specification for Minimum Performance and Safety Requirements for Resuscitators Intended for Use With Humans

  • ASTM F0921-85R02 : Terminology Relating to Hemostatic Forceps

  • ASTM F0922-01 : Test Method for Motor Life Evaluation of an Electric Motorized Nozzle

  • ASTM F0923-00 : Guide to Properties of High Visibility Materials Used to Improve Individual Safety

  • ASTM F0924-90R04 : Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings

  • ASTM F0925-02 : Test Method for Resistance to Chemicals of Resilient Flooring

  • ASTM F0926-02 : Specification for Cautionary Labeling of Portable Kerosine and Diesel Containers for Consumer Use

  • ASTM F0928 : Test Methods for Edge Contour of Circular Semiconductor Wafers and Rigid Disk Substrates

  • ASTM F0934-96R03 : Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

  • ASTM F0935-00R04 : Test Method for Comparing Cover-Up Correction Media

  • ASTM F0939-05A : Practice for Selection of Release Torque Values for Alpine Ski Bindings

  • ASTM F0940-99R05 : Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding

  • ASTM F0941-99R05 : Practice for Inspection of Marine Surface Preparation and Coating Application

  • ASTM F0942-02 : Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures

  • ASTM F0944 : Specification for Properties of Adult Alpine Ski Boots

  • ASTM F0945-01 : Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials

  • ASTM F0946-85R04 : Guide for Establishing Security Seal Control and Accountability Procedures

  • ASTM F0947 : Test Method for Determining Low-Level X-Radiation Sensitivity of Photographic Films

  • ASTM F0948-94R01E01 : Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow

  • ASTM F0949-03 : Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

  • ASTM F0950 : Test Method for Measuring the Depth of Crystal Damage of a Mechanically Worked Silicon Slice Surface by Angle Polishing and Defect Etching

  • ASTM F0951 : Test Method for Determination of Radial Interstitial Oxygen Variation in Silicon Wafers

  • ASTM F0952-03 : Specification for Mixing Machines, Food, Electric

  • ASTM F0953-94R03 : Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing

  • ASTM F0955-03 : Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances

  • ASTM F0956-91R01 : Specification for Bell, Cast, Sound Signalling

  • ASTM F0957-91R01 : Specification for Gong, Sound Signaling

  • ASTM F0959-04 : Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

  • ASTM F0959M-04 : Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners \[Metric\]

  • ASTM F0960 : Specification for Medical and Surgical Suction and Drainage Systems

  • ASTM F0961-03 : Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)

  • ASTM F0962-04 : Specification for Oil Spill Response Boom Connection : Z-Connector

  • ASTM F0963-03 : Consumer Safety Specification for Toy Safety

  • ASTM F0964-02 : Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing

  • ASTM F0965-99 : Specification for Rigid Laryngoscopes for Tracheal Intubation\MHook-On Fittings for Laryngoscope Handles and Blades with Lamps

  • ASTM F0966-00 : Consumer Safety Specification for Full-Size and Non-Full-Size Baby Crib Corner Post Extensions

  • ASTM F0967-03 : Practice for Security Engineering Symbols

  • ASTM F0968-93R02E01 : Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers

  • ASTM F0969-01 : Practice for Construction of Chain-Link Tennis Court Fence

  • ASTM F0970-00 : Test Method for Static Load Limit

  • ASTM F0974-96R01 : Practice for Determination of the Color Response of an Electrostatic Copying System, Black and White Output

  • ASTM F0976-02 : Specification for Portable Kerosine and Diesel Containers for Consumer Use

  • ASTM F0977-03 : Consumer Safety Specification for Infant Walkers

  • ASTM F0978 : Test Method for Characterizing Semiconductor Deep Levels by Transient Capacitance Techniques

  • ASTM F0979-86R03 : Test Method for Hermeticity of Hybrid Microcircuit Packages Prior to Lidding

  • ASTM F0980M-96R03 : Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices \[Metric\]

  • ASTM F0981-04 : Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone

  • ASTM F0982-86R02 : Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion

  • ASTM F0983-86R05 : Practice for Permanent Marking of Orthopaedic Implant Components

  • ASTM F0985-00 : Specification for Panama Canal Pilot Platform

  • ASTM F0986-86R04 : Specification for Suction Strainer Boxes

  • ASTM F0987-04 : Specification for Portable Intermediate Flush Deck Stanchion

  • ASTM F0991M-04 : Specification for Docking/Drain Plug and Boss Assemblies \[Metric\]

  • ASTM F0992-86R01 : Specification for Valve Label Plates

  • ASTM F0993-86R01 : Specification for Valve Locking Devices

  • ASTM F0994-86R01 : Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

  • ASTM F0995-97R01 : Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer

  • ASTM F0996-98R03 : Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current\NVoltage Characteristics

  • ASTM F0997-98AR03 : Specification for Polycarbonate Resin for Medical Applications

  • ASTM F0998-04 : Specification for Centrifugal Pump, Shipboard Use

    • Company Info :

    퍼포먼스네트워크(주)

    강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
    Tel : 02-980-9800(대표전화)
    Tel : 070-4221-8620(해외)
    E-Mail: info @ anytest.co.kr (Technical,시험인증)

    ALT_TEXT
    QR Code Generator
    • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

      [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

    • MIL-Spec Documents2013년 December 11일 - 6:40 pm

      MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

    • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

      아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

    • IP Code2016년 April 12일 - 6:42 pm

      IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

    • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

      ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

    April 2024
    M T W T F S S
    « Aug    
    1234567
    891011121314
    15161718192021
    22232425262728
    2930  
    © Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.