ASTM G XXXX
ASTM G0001-03 : Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
ASTM G0002-88R02 : Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680|SDF or in Steam at 750|SDF
ASTM G0002M : Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 633|SDK or in Steam at 673|SDK \[Metric\]
ASTM G0003-89R04 : Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM G0004-01 : Guide for Conducting Corrosion Tests in Field Applications
ASTM G0005-94R04 : Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G0006-88R98 : Test Method for Abrasion Resistance of Pipeline Coatings
ASTM G0007-05 : Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
ASTM G0008-96R03 : Test Methods for Cathodic Disbonding of Pipeline Coatings
ASTM G0009-87R98 : Test Method for Water Penetration into Pipeline Coatings
ASTM G0010-83R02 : Test Method for Specific Bendability of Pipeline Coatings
ASTM G0011-04 : Test Method for Effects of Outdoor Weathering on Pipeline Coatings
ASTM G0012-83R98 : Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
ASTM G0013 : Test Method for Impact Resistance of Pipeline Coatings(Limestone Drop Test)
ASTM G0014-04 : Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G0015-04 : Terminology Relating to Corrosion and Corrosion Testing
ASTM G0016-95R04 : Guide for Applying Statistics to Analysis of Corrosion Data
ASTM G0017-88R98 : Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
ASTM G0018-88R98 : Test Method for Joints, Fittings, and Patches in Coated Pipelines
ASTM G0019-04 : Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial
ASTM G0020-88R02 : Test Method for Chemical Resistance of Pipeline Coatings
ASTM G0021-96R02 : Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM G0024-05 : Practice for Conducting Exposures to Daylight Filtered Through Glass
ASTM G0028-02 : Test Methods of Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
ASTM G0029-96R02 : Practice for Determining Algal Resistance of Plastic Films
ASTM G0030-97R03 : Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
ASTM G0031-72R04 : Practice for Laboratory Immersion Corrosion Testing of Metals
ASTM G0032-03 : Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM G0033-99R04 : Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM G0034-01 : Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G0035-98R04 : Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
ASTM G0036-94R00 : Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
ASTM G0037-98R04 : Practice for Use of Mattsson’s Solution of pH to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys
ASTM G0038-01 : Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
ASTM G0039-99R05 : Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM G0040-04 : Terminology Relating to Wear and Erosion
ASTM G0041-90R00 : Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
ASTM G0042-96R03 : Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
ASTM G0044-99R05 : Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 \% Sodium Chloride Solution
ASTM G0046-94R05 : Guide for Examination and Evaluation of Pitting Corrosion
ASTM G0047-98R04 : Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
ASTM G0048-03 : Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G0049-85R00 : Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G0050-76R03 : Practice for Conducting Atmospheric Corrosion Tests on Metals
ASTM G0051-95R00 : Test Method for Measuring pH of Soil for Use in Corrosion Testing
ASTM G0052-00 : Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM G0054 : Practice for Simple Static Oxidation Testing
ASTM G0055-88R98 : Test Method for Evaluating Pipeline Coating Patch Materials
ASTM G0056-82R00E01 : Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons
ASTM G0057-95AR01 : Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM G0058-85R05 : Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
ASTM G0059-97R03 : Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G0060-01 : Practice for Conducting Cyclic Humidity Exposures
ASTM G0061-86R03 : Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
ASTM G0062-87R98E01 : Test Methods for Holiday Detection in Pipeline Coatings
ASTM G0063-99 : Guide for Evaluating Nonmetallic Materials for Oxygen Service
ASTM G0064-99R05 : Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
ASTM G0065-04 : Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
ASTM G0066-99R05 : Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
ASTM G0067-04 : Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM G0069-97R03 : Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G0070-81R98 : Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM G0071-81R03 : Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G0072-01 : Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM G0073-04 : Practice for Liquid Impingement Erosion Testing
ASTM G0074-01 : Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact
ASTM G0075-01 : Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM G0076-04 : Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
ASTM G0077-98 : Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM G0078-01 : Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
ASTM G0079-83R96E01 : Practice for Evaluation of Metals Exposed to Carburization Environments
ASTM G0080-88R98 : Test Method for Specific Cathodic Disbonding of Pipeline Coatings
ASTM G0081-97AR02E01 : Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G0082-98R03 : Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
ASTM G0083-96 : Test Method for Wear Testing with a Crossed-Cylinder Apparatus
ASTM G0084-89R05 : Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
ASTM G0085-02E01 : Practice for Modified Salt Spray (Fog) Testing
ASTM G0086-98A : Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
ASTM G0087-02 : Practice for Conducting Moist SO Tests
ASTM G0088-90R97E01 : Guide for Designing Systems for Oxygen Service
ASTM G0090-98 : Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
ASTM G0091-97R04 : Practice for Monitoring Atmospheric SO Using the Sulfation Plate Technique
ASTM G0092-86R03 : Practice for Characterization of Atmospheric Test Sites
ASTM G0093-03E01 : Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
ASTM G0094-92R98 : Guide for Evaluating Metals for Oxygen Service
ASTM G0095-87R98E01 : Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
ASTM G0096-90R01E01 : Guide for On-Line Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
ASTM G0097-97R02E01 : Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM G0098-02 : Test Method for Galling Resistance of Materials
ASTM G0099-04A : Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G0100-89R04 : Test Method for Conducting Cyclic Galvanostaircase Polarization
ASTM G0101-04 : Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
ASTM G0102-89R04E01 : Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
ASTM G0103-97 : Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6 \% Sodium Chloride Solution
ASTM G0105-02 : Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM G0106-89R04 : Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
ASTM G0107-95R02 : Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
ASTM G0108-94R04 : Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
ASTM G0109-99AR05 : Test Method for Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM G0110-92R03E01 : Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
ASTM G0111-97 : Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
ASTM G0112-92R03 : Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
ASTM G0113-03 : Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM G0114-98 : Practice for Aging Oxygen-Service Materials Prior to Ignitibility or Flammability Testing
ASTM G0115-04 : Guide for Measuring and Reporting Friction Coefficients
ASTM G0116-99R04 : Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
ASTM G0117-02 : Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
ASTM G0118-02 : Guide for Recommended Format of Wear Test Data Suitable for Databases
ASTM G0119-04 : Guide for Determining Synergism Between Wear and Corrosion
ASTM G0120-01 : Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction
ASTM G0121-98R04 : Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G0122-96R02 : Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM G0123-00 : Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
ASTM G0124-95R03 : Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
ASTM G0125-00 : Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G0126-00 : Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
ASTM G0127-95R00 : Guide for the Selection of Cleaning Agents for Oxygen Systems
ASTM G0128-02E01 : Guide for Control of Hazards and Risks in Oxygen Enriched Systems
ASTM G0129-00 : Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
ASTM G0130-95R02 : Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G0131-96R02 : Practice for Cleaning of Materials and Components by Ultrasonic Techniques
ASTM G0132-96R01 : Test Method for Pin Abrasion Testing
ASTM G0133-02 : Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM G0134-95R01E01 : Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM G0135-95R01 : Guide for Computerized Exchange of Corrosion Data for Metals
ASTM G0136-03 : Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
ASTM G0137-97R03 : Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
ASTM G0138-03 : Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM G0139 : Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
ASTM G0140-02 : Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
ASTM G0141-03 : Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM G0142-98R04 : Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
ASTM G0143-03R04 : Test Method for Measurement of Web/Roller Friction Characteristics
ASTM G0144-01 : Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a HighTemperature Combustion Analyzer
ASTM G0145-96R01 : Guide for Studying Fire Incidents in Oxygen Systems
ASTM G0146-01 : Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
ASTM G0147-02 : Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
ASTM G0148-97R03 : Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
ASTM G0149 : Practice for Conducting the Washer Test for Atmospheric Galvanic Corrosion
ASTM G0150-99R04 : Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
ASTM G0151-00 : Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM G0152-05 : Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G0153-04 : Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G0154-04 : Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM G0155-04A : Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G0156-02 : Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test
ASTM G0157-98 : Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
ASTM G0158-98R04 : Guide for Three Methods of Assessing Buried Steel Tanks
ASTM G0159-98 : Tables for References Solar Spectral Irradiance at Air Mass 1.5 : Direct Normal and Hemispherical for a 37|SD Tilted Surface
ASTM G0160-03 : Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
ASTM G0161-00 : Guide for Corrosion-Related Failure Analysis
ASTM G0162-99R04 : Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
ASTM G0163-99R04 : Guide for Digital Data Acquisition in Wear and Friction Measurements
ASTM G0164-99R04 : Test Method for Determination of Surface Lubrication on Flexible Webs
ASTM G0165-99R05 : Practice for Determining Rail-to-Earth Resistance
ASTM G0166-00 : Guide for Statistical Analysis of Service Life Data
ASTM G0167-00 : Test Method for Calibration of a Pyranometer Using a Pyrheliometer
ASTM G0168-00 : Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
ASTM G0169-01 : Guide for Application of Basic Statistical Methods to Weathering Tests
ASTM G0170-01A : Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
ASTM G0171-03 : Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G0172-03 : Guide for Statistical Analysis of Accelerated Service Life Data
ASTM G0173-03 : Tables for Reference Solar Spectral Irradiances : Direct Normal and Hemispherical on 37|SD Tilted Surface
ASTM G0174-04 : Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM G0175-03 : Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications
ASTM G0176-03 : Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test\MCumulative Wear Method
ASTM G0177-03 : Tables for Reference Solar Ultraviolet Spectral Distributions : Hemispherical on 37|SD Tilted Surface
ASTM G0178-03 : Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
ASTM G0179-04 : Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
ASTM G0180-04 : Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete
ASTM G0181-04 : Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
ASTM G0183-05 : Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
ASTM G1 : Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
ASTM G10- : Withdrawn 1998 Replaced by G116-93 and G149-97
ASTM G100 : Test Method for Conducting Cyclic Galvanostaircase Polarization
ASTM G101 : Guide for Estimating the Atmospheric Corrosion Resistance of Low Alloy Steels
ASTM G102 : Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
ASTM G103 : Practice for Evaluating Stress Corrosion Cracking Resistance of Low Copper 7XXX Series AlZn Mg Cu Alloys in Boiling 6% Sodium Chloride Solution
ASTM G104-89(1993) : Test Method for Assessing Galvanic Corrosion Caused by the Atmosphere (Withdrawn 1998)
ASTM G105 : Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM G106 : Practice for Verification of Algorithm and Equipment for Electrochemical ImpedanceMeasurements
ASTM G107 : Guide for Formats for Collection and Compilation of Corrosion Data for Metals forComputerized Database Input
ASTM G108 : Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type304 and 304L Stainless Steels
ASTM G11 : Test Method for Effects of Outdoor Weathering on Pipeline Coatings
ASTM G110 : Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable AluminumAlloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
ASTM G111 : Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
ASTM G112 : Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
ASTM G115 : Guide for Measuring and Reporting Friction Coefficients
ASTM G116 : Practice for Conducting Wire on Bolt Test for Atmospheric Galvanic Corrosion
ASTM G117 : Guide for Calculating and Reporting Measures of Precision Using Data from InterlaboratoryWear or Erosion Tests
ASTM G118 : Guide for Recommended Format of Wear Test Data Suitable for Databases
ASTM G119 : Guide for Determining Synergism Between Wear and Corrosion
ASTM G12 : Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings onSteel
ASTM G123 : Test Method for Evaluating Stress Corrosion Cracking of Stainless Alloys with Different NickelContent in Boiling Acidified Sodium Chloride Solution
ASTM G124-95 : Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
ASTM G129 : Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials toEnvironmentally Assisted Cracking
ASTM G13 : Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test) (Withdrawn2003) No Replacement
ASTM G132 : Test Method for Pin Abrasion Testing
ASTM G133 : Test Method for Linearly Reciprocating Ball on Flat Sliding Wear
ASTM G134 : Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM G135 : Guide for Computerized Exchange of Corrosion Data for Metals
ASTM G137 : Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block OnRing Configuration
ASTM G13-89(1996)e1 : Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test) (Withdrawn 2003)
ASTM G139 : Test Method for Determining Stress Corrosion Cracking Resistance of Heat TreatableAluminum Alloy Products Using Breaking Load Method
ASTM G139-96 : Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method (Withdrawn 2004)
ASTM G14 : Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G140 : Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
ASTM G142 : Test Method for Determination of Susceptibility of Metals to Embrittlement in HydrogenContaining Environments at High Pressure, High Temperature, or Both
ASTM G143 : Test Method for Measurement of Web/Roller Friction Characteristics
ASTM G146 : Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in HighPressure, High Temperature Refinery Hydrogen Service
ASTM G148 : Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by anElectrochemical Technique
ASTM G149 : Practice for Conducting the Washer Test for Atmospheric Galvanic Corrosion (Withdrawn2004) No Replacement
ASTM G149-97 : Practice for Conducting the Washer Test for Atmospheric Galvanic Corrosion (Withdrawn 2004)
ASTM G15 : Terminology Relating to Corrosion and Corrosion Testing
ASTM G150 : Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
ASTM G157 : Guide for Evaluating the Corrosion Properties of Wrought Iron and Nickel Based CorrosionResistant Alloys for the Chemical Process Industries
ASTM G158 : Guide for Three Methods of Assessing Buried Steel Tanks
ASTM G159-98 : Tables for References Solar Spectral Irradiance at Air Mass 1.5 : Direct Normal and Hemispherical for a 37° Tilted Surface (Withdrawn 2005)
ASTM G16 : Guide for Applying Statistics to Analysis of Corrosion Data
ASTM G161 : Guide for Corrosion Related Failure Analysis
ASTM G162 : Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
ASTM G163 : Guide for Digital Data Acquisition in Wear and Friction Measurements
ASTM G164 : Test Method for Determination of Surface Lubrication on Flexible Webs
ASTM G165 : Practice for Determining Rail to Earth Resistance
ASTM G168 : Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
ASTM G17 : Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
ASTM G170 : Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in theLaboratory
ASTM G171 : Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G174 : Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM G176 : Test Method for Ranking Resistance of Plastics to Sliding Wear using Block on Ring WearTest/Cumulative Wear Method
ASTM G18 : Test Method for Joints, Fittings, and Patches in Coated Pipelines
ASTM G181 : Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials UnderLubricated Conditions
ASTM G182 : Test Method for Determination of the Breakaway Friction Characteristics of Rolling ElementBearings
ASTM G184 : Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors UsingRotating Cage
ASTM G185 : Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using theRotating Cylinder Electrode
ASTM G186 : Test Method for Determining Whether Gas Leak Detector Fluid Solutions Can Cause StressCorrosion Cracking of Brass Alloys
ASTM G187 : Test Method for Measurement of Soil Resistivity Using the Two Electrode Soil Box Method
ASTM G188 : Specification for Leak Detector Solutions Intended for Use on Brasses and Other CopperAlloys
ASTM G19 : Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial
ASTM G2/G2M : Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys inWater at 680°F [360°C] or in Steam at 750°F [400°C]
ASTM G20 : Test Method for Chemical Resistance of Pipeline Coatings
ASTM G22-76(1996) : Practice for Determining Resistance of Plastics to Bacteria (Withdrawn 2001)
ASTM G23-96 : Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Withdrawn 2000)
ASTM G25-70(1975) : Recommended Practice for Operating Enclosed Carbon Arc Type Apparatus for Light Exposure of Nonmetallic Materials (Withdrawn 1980)
ASTM G26-96 : Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Withdrawn 2000)
ASTM G27-70 : Recommended Practice for Operating Xenon Arc Type Apparatus for Light Exposure of Nonmetallic Materials (Withdrawn 1980)
ASTM G28 : Test Methods of Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel Rich, Chromium Bearing Alloys
ASTM G2M : Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys inWater at 633°K or in Steam at 673°K [Metric] (Withdrawn 2005) No Replacement
ASTM G2M-88(1996)e1 : Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 633°K or in Steam at 673°K [Metric] (Withdrawn 2005)
ASTM G3 : Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM G30 : Practice for Making and Using U Bend Stress Corrosion Test Specimens
ASTM G31 : Practice for Laboratory Immersion Corrosion Testing of Metals
ASTM G32 : Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM G33 : Practice for Recording Data from Atmospheric Corrosion Tests of Metallic Coated SteelSpecimens
ASTM G34 : Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series AluminumAlloys (EXCO Test)
ASTM G35 : Practice for Determining the Susceptibility of Stainless Steels and Related Nickel ChromiumIron Alloys to Stress Corrosion Cracking in Polythionic Acids
ASTM G36 : Practice for Evaluating Stress Corrosion Cracking Resistance of Metals and Alloys in a BoilingMagnesium Chloride Solution
ASTM G37 : Practice for Use of Mattsson’s Solution of pH 7.2 to Evaluate the Stress Corrosion CrackingSusceptibility of Copper Zinc Alloys
ASTM G38 : Practice for Making and Using C Ring Stress Corrosion Test Specimens
ASTM G39 : Practice for Preparation and Use of Bent Beam Stress Corrosion Test Specimens
ASTM G4 : Guide for Conducting Corrosion Tests in Field Applications
ASTM G41 : Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a HotSalt Environment
ASTM G42 : Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to ElevatedTemperatures
ASTM G43-75(1980) : Method of Acidified Synthetic Sea Water (Fog) Testing (Withdrawn 1987)
ASTM G44 : Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% SodiumChloride Solution
ASTM G45-75 : Recommended Practice for Specifying Limits for Fading and Discoloration of Nonmetallic Materials (Withdrawn 1981)
ASTM G46 : Guide for Examination and Evaluation of Pitting Corrosion
ASTM G47 : Test Method for Determining Susceptibility to Stress Corrosion Cracking of 2XXX and 7XXXAluminum Alloy Products
ASTM G48 : Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and RelatedAlloys by Use of Ferric Chloride Solution
ASTM G49 : Practice for Preparation and Use of Direct Tension Stress Corrosion Test Specimens
ASTM G5 : Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic PolarizationMeasurements
ASTM G50 : Practice for Conducting Atmospheric Corrosion Tests on Metals
ASTM G51 : Test Method for Measuring pH of Soil for Use in Corrosion Testing
ASTM G52 : Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM G53-96 : Practice for Operating Light- and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials (Withdrawn 2000)
ASTM G54-84(1996) : Practice for Simple Static Oxidation Testing (Withdrawn 2002)
ASTM G55 : Test Method for Evaluating Pipeline Coating Patch Materials
ASTM G56 : Test Method for Abrasiveness of Ink Impregnated Fabric Printer Ribbons
ASTM G57 : Test Method for Field Measurement of Soil Resistivity Using the Wenner Four ElectrodeMethod
ASTM G58 : Practice for Preparation of Stress Corrosion Test Specimens for Weldments
ASTM G59 : Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G6 : Test Method for Abrasion Resistance of Pipeline Coatings
ASTM G60 : Practice for Conducting Cyclic Humidity Exposures
ASTM G61 : Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for LocalizedCorrosion Susceptibility of Iron , Nickel , or Cobalt Based Alloys
ASTM G62 : Test Methods for Holiday Detection in Pipeline Coatings
ASTM G64 : Classification of Resistance to Stress Corrosion Cracking of Heat Treatable Aluminum Alloys
ASTM G65 : Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
ASTM G66 : Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX SeriesAluminum Alloys (ASSET Test)
ASTM G67 : Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX SeriesAluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM G68-80 : Practice for Liquid Sodium Corrosion Testing of Metals and Alloys (Withdrawn 1992)
ASTM G69 : Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G70 : Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM G71 : Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G73 : Practice for Liquid Impingement Erosion Testing
ASTM G75 : Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry AbrasionResponse of Materials (SAR Number)
ASTM G76 : Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
ASTM G77 : Test Method for Ranking Resistance of Materials to Sliding Wear Using Block on Ring WearTest
ASTM G78 : Guide for Crevice Corrosion Testing of Iron Base and Nickel Base Stainless Alloys inSeawater and Other Chloride Containing Aqueous Environments
ASTM G79 : Practice for Evaluation of Metals Exposed to Carburization Environments (Withdrawn 2005) No Replacement
ASTM G79-83(1996)e1 : Practice for Evaluation of Metals Exposed to Carburization Environments (Withdrawn 2005)
ASTM G8 : Test Methods for Cathodic Disbonding of Pipeline Coatings
ASTM G80 : Test Method for Specific Cathodic Disbonding of Pipeline Coatings
ASTM G81 : Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G82 : Guide for Development and Use of a Galvanic Series for Predicting Galvanic CorrosionPerformance
ASTM G83 : Test Method for Wear Testing with a Crossed Cylinder Apparatus (Withdrawn 2005) NoReplacement
ASTM G83-96 : Test Method for Wear Testing with a Crossed-Cylinder Apparatus (Withdrawn 2005)
ASTM G84 : Practice for Measurement of Time of Wetness on Surfaces Exposed to Wetting Conditions asin Atmospheric Corrosion Testing
ASTM G87 : Practice for Conducting Moist SO2 Tests
ASTM G89-85 : Methods for Cathodic Disbonding of Pipeline Coatings Subjected to Cyclic Temperatures (Withdrawn 1992)
ASTM G9 : Test Method for Water Penetration into Pipeline Coatings
ASTM G91 : Practice for Monitoring Atmospheric SO2 Using the Sulfation Plate Technique
ASTM G92 : Practice for Characterization of Atmospheric Test Sites
ASTM G95 : Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
ASTM G96 : Guide for On Line Monitoring of Corrosion in Plant Equipment (Electrical and ElectrochemicalMethods)
ASTM G97 : Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens forUnderground Applications
ASTM G98 : Test Method for Galling Resistance of Materials
ASTM G99 : Test Method for Wear Testing with a Pin on Disk Apparatus
위 ASTM (American Society for Testing and Materials) 규격 목록은 ASTM 규격집 규격번호와 제목을 발췌, 열거한 것입니다.[출처 : www.astm.org ]
MIL-Spec Documents2013년 December 11일 - 6:40 pm
IP Code2016년 April 12일 - 6:42 pm
ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm