STD-EN 6XXXX

-|1|-

  • EN 601:2004 Aluminium and aluminium alloys – Castings – Chemical composition of castings for use in contact with foodstuff
  • EN 602:2004 Aluminium and aluminium alloys – Wrought products – Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
  • EN 603-1:1996 Aluminium and aluminium alloys – Wrought forging stock – Part 1: Technical conditions for inspection and delivery
  • EN 603-2:1996 Aluminium and aluminium alloys – Wrought forging stock – Part 2: Mechanical properties
  • EN 603-3:2000 Aluminium and aluminium alloys – Wrought forging stock – Part 3: Tolerances on dimensions and form
  • EN 604-1:1997 Aluminium and aluminium alloys – Cast forging stock – Part 1: Technical conditions for inspection and delivery
  • EN 604-2:1997 Aluminium and aluminium alloys – Cast forging stock – Part 2: Tolerances on dimensions and form
  • EN 6049-002:2010 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 002: General and list of product standards
  • EN 6049-003:2009 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 003: Braided, tubular, expandable – Product standard
  • EN 6049-006:2012 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 006: Self-wrapping protective sleeve, flexible post installation – Product standard
  • EN 6049-007:2012 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 007: Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from – 55 °C to 260 °C – Product standard
  • EN 6049-008:2013 Aerospace series – Electrical cables, installation – Protective sleeves in meta-aramid fibres – Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from – 55 °C to 200 °C – Product standard
  • EN 6059-100:2011 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 100: General
  • EN 6059-501:2010 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 501: Voltage proof test
  • EN 6059-502:2009 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 502: Resistance to electrical arcs
  • EN 6059-503:2012 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 503: Temperature rise due to rated current injected on the sleeve
  • EN 606:2004 Bar coding – Transport and handling labels for steel products
  • EN 60601-2-52:2010 Medical electrical equipment – Part 2-52: Particular requirements for basic safety and essential performance of medical beds (IEC 60601-2-52:2009)
  • EN 60601-2-52:2010/AC:2011 Medical electrical equipment – Part 2-52: Particular requirements for basic safety and essential performance of medical beds (IEC 60601-2-52:2009)
  • EN 6069:2009 Aerospace series – Rivet, 100° reduced flush head, close tolerance – Inch series
  • EN 607:2004 Eaves gutters and fittings made of PVC-U – Definitions, requirements and testing
  • EN 6072:2010 Aerospace series – Metallic materials – Test methods – Constant amplitude fatigue testing
  • EN 609-1:1999+A2:2009 Agricultural and forestry machinery – Safety of log splitters – Part 1: Wedge splitters
  • EN 609-2:1999+A1:2009 Agricultural and forestry machinery – Safety of log splitters – Part 2: Screw splitters
  • EN 610:1995 Tin and tin alloys – Ingot tin
  • EN 611-1:1995 Tin and tin alloys – Pewter and pewterware – Part 1: Pewter
  • EN 611-2:1996 Tin and tin alloys – Pewter and pewterware – Part 2: Pewterware
  • EN 612:2005 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
  • EN 613:2000 Independent gas-fired convection heaters
  • EN 613:2000/A1:2003 Independent gas-fired convection heaters
  • EN 614-1:2006+A1:2009 Safety of machinery – Ergonomic design principles – Part 1: Terminology and general principles
  • EN 614-2:2000+A1:2008 Safety of machinery – Ergonomic design principles – Part 2: Interactions between the design of machinery and work tasks
  • EN 615:2009 Fire protection – Fire extinguishing media – Specifications for powders (other than class D powders)
  • EN 617:2001+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
  • EN 618:2002+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
  • EN 619:2002+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of unit loads
  • EN 620:2002+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements for fixed belt conveyors for bulk materials
  • EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
  • EN 622-1:2003 Fibreboards – Specifications – Part 1: General requirements
  • EN 622-2:2004 Fibreboards – Specifications – Part 2: Requirements for hardboards
  • EN 622-2:2004/AC:2005 Fibreboards – Specifications – Part 2: Requirements for hardboards
  • EN 622-3:2004 Fibreboards – Specifications – Part 3: Requirements for medium boards
  • EN 622-4:2009 Fibreboards – Specifications – Part 4: Requirements for softboards
  • EN 622-5:2009 Fibreboards – Specifications – Part 5: Requirements for dry process boards (MDF)
  • EN 623-1:2006 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 1: Determination of the presence of defects by dye penetration
  • EN 623-2:1993 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 2: Determination of density and porosity
  • EN 623-3:2001 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method)
  • EN 623-4:2004 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 4: Determination of surface roughness
  • EN 623-5:2009 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 5: Determination of phase volume fraction by evaluation of micrographs
  • EN 624:2011 Specification for dedicated LPG appliances – Room sealed LPG space heating equipment for installation in vehicles and boats
  • EN 625:1995 Gas-fired central heating boilers – Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW
  • EN 626-1:1994+A1:2008 Safety of machinery – Reduction of risks to health from hazardous substances emitted by machinery – Part 1: Principles and specifications for machinery manufacturers
  • EN 626-2:1996+A1:2008 Safety of machinery – Reduction of risk to health from hazardous substances emitted by machinery – Part 2: Methodology leading to verification procedures
  • EN 627:1995 Specification for data logging and monitoring of lifts, escalators and passenger conveyors
  • EN 631-1:1993 Materials and articles in contact with foodstuffs – Catering containers – Part 1: Dimensions of containers
  • EN 631-2:1999 Materials and articles in contact with foodstuffs – Catering containers – Part 2: Dimensions of accessories and supports
  • EN 633:1993 Cement-bonded particleboards – Definition and classification
  • EN 634-1:1995 Cement-bonded particleboards – Specification – Part 1: General requirements
  • EN 634-2:2007 Cement-bonded particleboards – Specifications – Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
  • EN 635-1:1994 Plywood – Classification by surface appearance – Part 1: General
  • EN 635-2:1995 Plywood – Classification by surface appearance – Part 2: Hardwood
  • EN 635-3:1995 Plywood – Classification by surface appearance – Part 3: Softwood
  • EN 635-5:1999 Plywood – Classification by surface appearance – Part 5: Methods for measuring and expressing characteristics and defects
  • EN 636:2012 Plywood – Specifications
  • EN 637:1994 Plastics piping systems – Glass-reinforced plastics components – Determination of the amounts of constituents using the gravimetric method
  • EN 637:1994/AC:1995 Plastics piping systems – Glass-reinforced plastics components – Determination of the amounts of constituents using the gravimetric method
  • EN 639:1994 Common requirements for concrete pressure pipes including joints and fittings
  • EN 640:1994 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
  • EN 641:1994 Reinforced concrete pressure pipes, cylinder type, including joints and fittings
  • EN 642:1994 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirements for prestressing steel for pipes
  • EN 643:2001 Paper and board – European list of standard grades of recovered paper and board
  • EN 643:2001/AC:2002 Paper and board – European list of standard grades of recovered paper and board
  • EN 645:1993 Paper and board intended to come into contact with foodstuffs – Preparation of a cold water extract
  • EN 646:2006 Paper and board intended to come into contact with foodstuffs – Determination of colour fastness of dyed paper and board
  • EN 647:1993 Paper and board intended to come into contact with foodstuffs – Preparation of a hot water extract
  • EN 648:2006 Paper and board intended to come into contact with foodstuffs – Determination of the fastness of fluorescent whitened paper and board
  • EN 656:1999 Gas-fired central heating boilers – Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW
  • EN 656:1999/A1:2006 Gas-fired central heating boilers – Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW
  • EN 677:1998 Gas-fired central heating boilers – Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW
  • -|1|-