List of Testing items For Fabric

Fabric 시험 목록   

  • AATCC 135 : Dimensional Changes of Laundering
  • AATCC 20 : Fiber Identification- Microscopical Analysis (Qualitative)
  • AATCC Evaluation Procedure 1 : Gray Scale for Color Change
  • AATCC Evaluation Procedure 10 : Multifiber Adjacent Fabrics: Evaluation of
  • AATCC Evaluation Procedure 11 : Spectrophotometer UV Energy Calibration Procedure for Optically Brightened Textiles
  • AATCC Evaluation Procedure 12 : Instrumental Assessment of Degree of Staining
  • AATCC Evaluation Procedure 2 : Gray Scale for Staining
  • AATCC Evaluation Procedure 4 : Standard Depth Scales for Depth Determinatoin
  • AATCC Evaluation Procedure 5 : Fabric Hand: Guidelines for the Subjective Evaluation of
  • AATCC Evaluation Procedure 6 : Instrumental Color Measurement
  • AATCC Evaluation Procedure 7 : Instrumental Assessment of the Change in Color of a Test Specimen
  • AATCC Evaluation Procedure 8 : AATCC 9-Step Chromatic Transference Scale
  • AATCC Evaluation Procedure 9 : Visual Assessment of Color Difference of Textiles
  • AATCC Monograph 1 : 1993 AATCC Standard Reference Detergent and Laundry Detergents in General
  • AATCC Monograph 10 : Barré: Visual Assessment Descriptive Terms and Terminology
  • AATCC Monograph 2 : 2003 AATCC Standard Reference Liquid Laundry Detergent
  • AATCC Monograph 3 : High Efficiency Washers in North America
  • AATCC Monograph 4 : Overview of Liquid Fabric Softeners used in Home Laundering
  • AATCC Monograph 5 : Standardization of Hand Laundering for Fabrics and Apparel
  • AATCC Monograph 6 : Standardization of Home Laundry Test Conditions
  • AATCC Monograph 7 : Standard Laboratory Practice for Home Laundering Fabrics Prior to Flammability Testing to Differentiate Between Durable and Non-Durable Finishes
  • AATCC Monograph 9 : A Summary of ASTM Methods for Interlaboratory Testing
  • AATCC Test Method 100 : Antibacterial Finishes on Textile Materials: Assessment of
  • AATCC Test Method 101 : Colorfastness to: Bleaching with Hydrogen Peroxide
  • AATCC Test Method 102 : Hydrogen Peroxide by Potassium Titration: Determination of
  • AATCC Test Method 103 : Bacterial Alpha-Amylase Enzymes Used in Desizing, Assay of
  • AATCC Test Method 104 : Colorfastness to: Water Spotting
  • AATCC Test Method 106 : Colorfastness to: Water: Sea
  • AATCC Test Method 107 : Colorfastness to: Water
  • AATCC Test Method 109 : Colorfastness to: Ozone in the Atmosphere under Low Humidities
  • AATCC Test Method 110 : Whiteness of Textiles
  • AATCC Test Method 111 : Weather Resistance of Textiles: Exposure to Daylight and Weather
  • AATCC Test Method 112 : Formaldehyde Release from Fabric, Determination of: Sealed Jar Method
  • AATCC Test Method 114 : Chlorine, Retained, Tensile Loss: Multiple Sample Method
  • AATCC Test Method 115 : Electrostatic Clinging of Fabrics: Fabric-to-Metal Test
  • AATCC Test Method 116 : Colorfastness to: Crocking: Rotary Vertical Crockmeter Method
  • AATCC Test Method 117 : Colorfastness to: Heat: Dry (Excluding Pressing)
  • AATCC Test Method 118 : Oil Repellency: Hydrocarbon Resistance Test
  • AATCC Test Method 119 : Color Change due to Flat Abrasion (Frosting): Screen Wire Method
  • AATCC Test Method 119 : Frosting (Color Change due to Flat Abrasion): Screen Method
  • AATCC Test Method 120 : Color Change due to Flat Abrasion (Frosting): Emery Method
  • AATCC Test Method 120 : Frosting (Color Change due to Flat Abrasion): Emery Method
  • AATCC Test Method 121 : Carpet Soiling: Visual Rating Method
  • AATCC Test Method 122 : Carpet Soiling: Service Soiling Method
  • AATCC Test Method 124 : Fabrics; Appearance of, after Repeated Home Laundering
  • AATCC Test Method 124 : Smoothness Appearance of Fabrics after Repeated Home Laundering
  • AATCC Test Method 125 : Colorfastness to: Perspiration and Light
  • AATCC Test Method 127 : Water Resistance: Hydrostatic Pressure Test
  • AATCC Test Method 128 : Wrinkle Recovery of Fabrics: Appearance Method
  • AATCC Test Method 129 : Colorfastness to: Ozone in the Atmosphere under High Humidities
  • AATCC Test Method 130 : Soil Release: Oily Stain Release Method
  • AATCC Test Method 131 : Colorfastness to: Pleating: Steam Pleating
  • AATCC Test Method 132 : Colorfastness to: Drycleaning
  • AATCC Test Method 133 : Colorfastness to: Heat: Hot Pressing
  • AATCC Test Method 134 : Electrostatic Propensity of Carpets
  • AATCC Test Method 135 : Dimensional Changes of Fabrics after Home Laundering
  • AATCC Test Method 135 : Dimensional Changes of Fabrics after Home Laundering
  • AATCC Test Method 136 : Bond Strength of Bonded and Laminated Fabrics
  • AATCC Test Method 137 : Rug Back Staining on Vinyl Tile
  • AATCC Test Method 138 : Cleaning: Washing of Textile Floor Coverings
  • AATCC Test Method 140 : Dye and Pigment Migration in a Pad-Dry Process: Evaluation of
  • AATCC Test Method 140 : Migration: Dye and Pigment Migration in a Pad-Dry Process: Evaluation of
  • AATCC Test Method 141 : Compatibility of Basic Dyes for Acrylic Fibers
  • AATCC Test Method 142 : Appearance of Flocked Fabrics after Repeated Home Laundering and/or Coin-Op Drycleaning
  • AATCC Test Method 143 : Appearance of Apparel and Other Textile End Products after Repeated Home Laundering
  • AATCC Test Method 144 : Alkali in Wet Processed Textiles: Total
  • AATCC Test Method 146 : Dispersibility of Disperse Dyes: Filter Test
  • AATCC Test Method 147 : Antibacterial Activity Assessment of Textile Materials: Parallel Streak Method
  • AATCC Test Method 148 : Light Blocking Effect of Textiles and Related Materials: Photodetector Method
  • AATCC Test Method 149 : Chelation Agents: Chelation Value of Aminopolycarboxylic Acids and Their Salts; Calcium Oxalate Method
  • AATCC Test Method 15 : Colorfastness to: Perspiration
  • AATCC Test Method 150 : Dimensional Changes of Garments after Home Laundering
  • AATCC Test Method 154 : Thermal Fixation Properties of Disperse Dyes
  • AATCC Test Method 157 : Colorfastness to: Solvent Spotting: Perchloroethylene
  • AATCC Test Method 158 : Dimensional Changes on Drycleaning in Perchloroethylene: Machine Method
  • AATCC Test Method 159 : Transfer of Acid and Premetallized Acid Dyes on Nylon
  • AATCC Test Method 16.1 : Colorfastness to: Light: Outdoor
  • AATCC Test Method 16.2 : Colorfastness to: Light: Carbon-Arc
  • AATCC Test Method 16.3 : Colorfastness to: Light: Xenon-Arc
  • AATCC Test Method 161 : Chelating Agents: Disperse Dye Shade Change Caused by Metals; Control of
  • AATCC Test Method 162 : Colorfastness to: Water: Chlorinated Pool
  • AATCC Test Method 163 : Colorfastness to: Dye Transfer in Storage: Fabric-to-Fabric
  • AATCC Test Method 164 : Colorfastness to: Oxides of Nitrogen in the Atmosphere under High Humidities
  • AATCC Test Method 165 : Colorfastness to: Crocking: Textile Floor Coverings-Crockmeter Method
  • AATCC Test Method 167 : Foaming Propensity of Disperse Dyes
  • AATCC Test Method 168 : Chelating Agents: Active Ingredient Content of Polyaminopolycarboxylic Acids and Their Salts; Copper PAN Method
  • AATCC Test Method 169 : Weather Resistance of Textiles: Xenon Lamp Exposure
  • AATCC Test Method 17 : Wetting Agents, Evaluation of
  • AATCC Test Method 170 : Dusting Propensity of Powder Dyes: Evaluation of
  • AATCC Test Method 171 : Carpets: Cleaning of; Hot Water Extraction Method
  • AATCC Test Method 172 : Colorfastness to: Powdered Non-Chlorine Bleach in Home Laundering
  • AATCC Test Method 173 : CMC: Calculation of Small Color Differences for Acceptability
  • AATCC Test Method 174 : Antimicrobial Activity Assessment of Carpets
  • AATCC Test Method 175 : Carpets: Stain Resistance: Pile Floor Coverings
  • AATCC Test Method 175 : Stain Resistance: Pile Floor Coverings
  • AATCC Test Method 176 : Speckiness of Colorant Dispersions: Evaluation of
  • AATCC Test Method 179 : Skewness Change in Fabric and Garment Twist Resulting from Automatic Home Laundering
  • AATCC Test Method 182 : Relative Color Strength of Dyes in Solutions
  • AATCC Test Method 183 : Transmittance or Blocking of Erythemally Weighted Ultraviolet Radiation through Fabrics
  • AATCC Test Method 184 : Dusting Behavior of Dyes: Determination of
  • AATCC Test Method 185 : Chelating Agents: Percent Content in Hydrogen Peroxide Bleach Baths; Copper PAN Indicator Method
  • AATCC Test Method 186 : Weather Resistance: UV Light and Moisture Exposure
  • AATCC Test Method 187 : Dimensional Changes of Fabrics: Accelerated
  • AATCC Test Method 188 : Colorfastness to: Sodium Hypochlorite Bleach in Home Laundering
  • AATCC Test Method 189 : Fluorine Content of Carpet Fibers
  • AATCC Test Method 190 : Colorfastness to: Home Laundering with Activated Oxygen Bleach Detergent: Accelerated
  • AATCC Test Method 191 : Acid Cellulase Enzymes, Effect of: Top Loading Washer
  • AATCC Test Method 192 : Weather Resistance of Textiles: Sunshine-Arc Lamp Exposure with and without Wetting
  • AATCC Test Method 193 : Aqueous Liquid Repellency: Water/Alcohol Solution Resistance Test
  • AATCC Test Method 194 : Anti-House Dust Mite Properties of Textiles under Long-Term Test Conditions; Assessment of
  • AATCC Test Method 194 : Assessment of the Anti-House Dust Mite Properties of Textile under Long-Term Test Conditions
  • AATCC Test Method 195 : Liquid Moisture Management Properties of Textile Fabrics
  • AATCC Test Method 196 : Colorfastness to: Sodium Hypochlorite of a Textile Floor Covering
  • AATCC Test Method 197 : Vertical Wicking of Textiles
  • AATCC Test Method 198 : Horizontal Wicking of Textiles
  • AATCC Test Method 199 : Drying Time of Textiles: Moisture Analyzer Method
  • AATCC Test Method 20 : Fiber Analysis: Qualitative
  • AATCC Test Method 200 : Drying Rate of Textiles at their Absorbent Capacity: Air Flow Method
  • AATCC Test Method 201 : Drying Rate of Fabrics: Heated Plate Method
  • AATCC Test Method 202 : Relative Hand Value of Textiles: Instrumental Method
  • AATCC Test Method 203 : Light Blocking Effect of Textiles: Spectrophotometric Method
  • AATCC Test Method 20A : Fiber Analysis: Quantitative
  • AATCC Test Method 22 : Water Repellency: Spray Test
  • AATCC Test Method 23 : Colorfastness to: Burnt Gas Fumes
  • AATCC Test Method 26 : Ageing of Sulfur-Dyed Textiles: Accelerated
  • AATCC Test Method 27 : Wetting Agents: Evaluation of Rewetting Agents
  • AATCC Test Method 30 : Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials
  • AATCC Test Method 30 : Mildew and Rot Resistance of Textiles: Fungicides
  • AATCC Test Method 35 : Water Resistance: Rain Test
  • AATCC Test Method 42 : Water Resistance: Impact Penetration Test
  • AATCC Test Method 43 : Wetting Agents for Mercerization
  • AATCC Test Method 6 : Colorfastness to: Acids and Alkalis
  • AATCC Test Method 61 : Colorfastness to: Laundering: Accelerated
  • AATCC Test Method 66 : Wrinkle Recovery of Woven Fabrics: Recovery Angle
  • AATCC Test Method 70 : Water Repellency: Tumble Jar Dynamic Absorption Test
  • AATCC Test Method 76 : Electrical Surface Resistivity of Fabrics
  • AATCC Test Method 79 : Absorbency of Textiles
  • AATCC Test Method 8 : Colorfastness to: Crocking; Crockmeter Method
  • AATCC Test Method 81 : pH of the Water-Extract from Wet Processed Textiles
  • AATCC Test Method 82 : Fluidity of Dispersions of Cellulose from Bleached Cotton Cloth
  • AATCC Test Method 84 : Electrical Resistance of Yarns
  • AATCC Test Method 86 : Drycleaning: Durability of Applied Designs and Finishes
  • AATCC Test Method 88B : Seams; in Fabrics; Smoothness of, after Repeated Home Laundering
  • AATCC Test Method 88B : Smoothness of Seams in Fabrics after Repeated Home Laundering
  • AATCC Test Method 88C : Creases; in Fabrics, Retention of, after Repeated Home Laundering
  • AATCC Test Method 88C : Retention of Creases in Fabrics after Repeated Home Laundering
  • AATCC Test Method 89 : Mercerization in Cotton
  • AATCC Test Method 90 : Antibacterial Activity Assessment of Textile Materials: Agar Plate Method
  • AATCC Test Method 92 : Chlorine, Retained, Tensile Loss: Single Sample Method
  • AATCC Test Method 93 : Abrasion Resistance of Fabrics: Accelerotor Method
  • AATCC Test Method 94 : Analysis of Textiles: Finishes, Identification of
  • AATCC Test Method 94 : Finishes in Textiles: Identification
  • AATCC Test Method 96 : Dimensional Changes in Commercial Laundering of Woven and Knitted Fabrics Except Wool
  • AATCC Test Method 97 : Extractable Content of Textiles
  • AATCC Test Method 98 : Alkali in Bleach Baths Containing Hydrogen Peroxide
  • AATCC61 Method 1A, 2A, 3A : Colorfastness to Laundering
  • AMCA 500-L : Laboratory Methods of Testing Louvers for Rating
  • ANSI/AMCA Standard 220-05 (R2012) : Laboratory Methods of Testing Air Curtains for Aerodynamic Performance Ratings
  • ASHRAE 52.1 : Testing for HVAC Air Filtration
  • ASTM A390 – 06(2011)  : Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
  • ASTM C1186 – 08(2012 : Standard Specification for Flat Fiber-Cement Sheets
  • ASTM C1288 – 14 : Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
  • ASTM D 4169-09 : Standard Practice for Performance Testing of Shipping Containers and Systems
  • ASTM D 4459 : Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
  • ASTM D1238-13 : Melt Flow Rates of Thermoplastics by Extrusion Plastomer
  • ASTM D1298 : Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D1298/IP 160, API MPMS Ch 9.1 : Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D130/ IP154 : Standard Test Method for Corrosiveness to Copper from Petroleum Products by  Copper Strip Test
  • ASTM D1319/ IP156 : Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption.
  • ASTM D1505 – 10 : Density of Plastics by the Density-Gradient Technique
  • ASTM D1683 : Seam Breaking Strength
  • ASTM D2699/IP237 : Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
  • ASTM D2700/IP236 : Standard Test Method for Motor Oktane Number of Spark-Ignition Engine Fuel
  • ASTM D3776 Option C : Mass per Unit of Fabric – Option C
  • ASTM D3786 : Bursting Strength of Textile Fabrics . Diaphragm
  • ASTM D381 : Standard Test Method for Gum Content in Fuels by Jet Evaporation
  • ASTM D4052 : Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4052 : Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4176 : Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels(Visual Inspection Procedures)
  • ASTM D4239-14e2 : Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
  • ASTM D4294 : tandard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D434 : Resistance of Yarns to Seam Slippage
  • ASTM D4442 – 15 : Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
  • ASTM D4444 – 13 : Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
  • ASTM D445 : Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
  • ASTM D4703 – 10a : Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
  • ASTM D4737 : Standard Test Method for Calculated Cetane  Index by Four Variable Equation
  • ASTM D483-04 : tandard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
  • ASTM D4952 : Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
  • ASTM D5034 : Breaking Strength and Elongation (Grab Test) Breaking Strength Only
  • ASTM D5191 : Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D525/ IP40 : Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
  • ASTM D5373-14e1 : Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
  • ASTM D5453 : tandard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
  • ASTM D5587 / ASTM D5733 : Trapezoidal Tear Strength
  • ASTM D5845 : Standard Test Method for Determination of MTBE,ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5865 : Standard Test Method for Gross Calorific Value of Coal and Coke
  • ASTM D613/ IP41 : Standard Test Method for Cetane Number of Diesel Fuel Oil
  • ASTM D6413 : Flame Resistance of Textiles (Vertical Test)
  • ASTM D6413 : NFPA 2112 Section 8.3 Flame Resistance of Textiles (Vertical Test) Heat & Thermal Shrinkage
  • ASTM D6971 : Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
  • ASTM D7344 : Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
  • ASTM D7582 : Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
  • ASTM D86 : Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
  • ASTM D974-14e1 : Standard Test Method for Acid and Base Number by Color-Indicator Titration
  • ASTM D976 : Standard Test Method for Calculated Cetane Index of Distillate Fuels
  • ASTM E160-80 : Test Method for Combustible Properties of Treated Wood by the Crib Test (Withdrawn 1993)
  • ASTM E162 – 15a : Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM E1627 : Standard Practice for Sensory Evaluation of Edible Oils and Fats
  • ASTM E176  : Terminology of Fire Standards
  • ASTM E2231 : Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
  • ASTM E2404 : Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Characteristics
  • ASTM E2573 : Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
  • ASTM E2579 : Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
  • ASTM E2599 : Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
  • ASTM E2688 : Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
  • ASTM E2690 : Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
  • ASTM E2768 : Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
  • ASTM E286  : Test Method for Surface Flammability of Building Materials Using an 8-ft (2.44-m) Tunnel Furnace
  • ASTM E2988 : Practice for Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics
  • ASTM E308 – 13 : Computing the Colors of Objects by Using the CIE System
  • ASTM E69 – 02 : Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
  • ASTM E84 – 15a : Standard Test Method for Surface Burning Characteristics of Building Materials
  • ASTM F1506 : Standard Performance Specification for Flame Resistant and Arc Rated Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards
  • ASTM F1914 : Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
  • ASTM F2894 : Heat & Thermal Shrinkage
  • BS 476-3 : Fire tests on building materials and structures. Classification and method of test for external fire exposure to roofs
  • BS 476-4 : Fire tests on building materials and structures. Non-combustibility test for materials
  • BS 476-5 : Fire tests on building materials and structures. Method of test for ignitability
  • BS 476-6 : Fire tests on building materials and structures. Method of test for fire propagation for products
  • BS 476-7 : Fire tests on building materials and structures. Method of test to determine the classification of the surface spread of flame of products
  • BS 476-8 : Fire tests on building materials and structures. Test methods and criteria for the fire resistance of elements of building construction
  • EN 1047-1 : Secure storage units. Classification and methods of test for resistance to fire. Data cabinets and diskette inserts
  • EN 124 : 1995 : Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control
  • EN 124-1:2015 : Gully tops and manhole tops for vehicular and pedestrian areas. Definitions, classification, general principles of design, performance requirements and test methods
  • EN 124-2:2015 : Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of cast iron
  • EN 124-3:2015 : Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of steel or aluminium alloys
  • EN 124-4:2015 : Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of steel reinforced concrete
  • EN 124-5:2015 : Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of composite materials
  • EN 124-6:2015 : Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
  • EN 13016-1 : Liquid petroleum products – Vapour pressure – Part 1:  Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
  • EN 1335-3 : Office furniture. Office work chair. Test methods
  • EN 13501-1 : Fire classification of construction products and building elements. Classification using test data from reaction to fire tests
  • EN 13501-2 : Fire classification of construction products and building elements. Classification using data from fire resistance tests, excluding ventilation services
  • EN 13501-3 : Fire classification of construction products and building elements. Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers
  • EN 13501-4 : Fire classification of construction products and building elements. Classification using data from fire resistance tests on components of smoke control systems
  • EN 13501-5 : Fire classification of construction products and building elements. Classification using data from external fire exposure to roofs tests
  • EN 13501-6 : Fire classification of construction products and building elements. Classification using data from reaction to fire tests on electric cables
  • EN 14449 : Glass in building – Laminated glass and laminated safety glass –Evaluation of conformity/Product standard
  • EN 14449 : Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard
  • EN 15486 : Ethanol as a blending component for petrol– Determination of sulphur content -Ultraviolet fluorescence method
  • EN 15659 : Secure storage units. Classification and methods of test for resistance to fire. Light fire storage units
  • EN 1627 RC1~RC6 : Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Requirements and classification
  • EN 55022 : Information technology equipment – Radio disturbance characteristics
  • EN 55024 : Information technology equipment – Immunity characteristics
  • EN ISO 11608-1 : Needle-based injection systems for medical use — Requirements and test methods — Part 1: Needle-based injection systems
  • EN ISO 11608-1 : Needle-based injection systems for medical use.
  • EN ISO 11608-2 : Needle-based injection systems for medical use — Requirements and test methods — Part 2: Needles
  • EN ISO 11608-3 : Needle-based injection systems for medical use — Requirements and test methods — Part 3: Finished containers
  • EN ISO 11608-4 : Pen-injectors for medical use — Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
  • EN ISO 11608-5 : Needle-based injection systems for medical use — Requirements and test methods — Part 5: Automated functions
  • EN ISO 12185 : Crude petroleum and petroleum products – Determination of density – Oscillating U-tube Method
  • EN ISO 20846 : Petroleum product s- Determination of sulfur content of automotive fuels – Ultraviolet fluorescence method
  • EN ISO 20847 : Petroleum products – Determination of sulfur content of automotive fuels – Energy-dispersive X-ray fluorescence spectrometry
  • EN ISO 2160  : Petroleum products – Corrosiveness to copper –  Copper strip test
  • EN ISO 24343 : Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 1: Residual indentation
  • EN ISO 24344 : Resilient floor coverings — Determination of flexibility and deflection
  • EN ISO 3405 : Petroleum products. Determination of distillation characteristics at atmospheric pressure
  • EN ISO 3675 : Crude petroleum and liquid petroleum products – Laboratory determination of density – Hydrometer method
  • EN ISO 4264 : Petroleum products – Calculation of Cetane Index of Middle-distillate Fuels by the Four-variable equation
  • EN ISO 5163 : Petroleum products – Determination of knok characteristics of motor and aviation fuels – Motor method
  • EN ISO 5164 : Petroleum products – Determination of knok characteristics of motor fuels – Research method
  • EN ISO 5165 : Petroleum products – Determination of the ignition quality of diesel fuels – Cetane engine method
  • EN ISO 5275 : Petroleum products and hydrocarbon solvents – Detection of thiols and other sulfur species – Doctor test
  • EN ISO 6009 : Hypodermic needles for single use — Colour coding for identification
  • EN ISO 6246 : Petroleum products - Gum content of light and middle distillate  fuels -  Jet evaporation method
  • EN ISO 7536 : Petroleum products – Determination of oxidation stability of gasoline – Induction period method
  • EN ISO 7864 : Sterile hypodermic needles for single use
  • EN ISO 8754 : Petroleum products -Determination of sulfur content – Energydispersive X-ray fluorescence spectrometry
  • EN ISO 9626 : Stainless steel needle tubing for the manufacture of medical devices
  • EN ISO 9626 : Stainless steel needle tubing for the manufacture of medical devices
  • EN ISO 7864 : Sterile hypodermic needles for single use
  • EN 15553 : Petroleum products and related materials -  Determination of hydrocarbon types – Fluorescent indicator adsorption method
  • FTMS 191A Method 1534 : Thread Melt
  • ISO 16474-2:2013 : Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
  • ISO 23908 : Sharps injury protection — Requirements and test methods — Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
  • ISO 23908 : Sharps injury protection
  • ISO 8302 : Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus
  • NFPA 1952 : Standard on Surface Water Operations Protective Clothing and Equipment
  • NFPA 1975 : Standard on Station/Work Uniforms for Emergency Services
  • NFPA 1977 : Standard on Protective Clothing and Equipment for Wildland Fire Fighting
  • NFPA 2112 : Standard on Selection, Care, Use, and Maintenance of Flame-Resistant Garments for Protection of Industrial Personnel Against Short-Duration Thermal Exposures