STD-EN related CE Marking Conti 4

|1||2||3| -|4|-

  • EN 60601-2-28:1993 ; Medical electrical equipment — Part 2: Particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis
  • EN 60601-2-28:2010 ; Medical electrical equipment — Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
  • EN 60601-2-29:2008 ; Medical electrical equipment — Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators
  • EN 60601-2-3:1993 ; Medical electrical equipment — Part 2: Particular requirements for the safety of short-wave therapy equipment
  • EN 60601-2-3:1993/A1:1998 ; IEC 60601-2-3:1991/A1:1998
  • EN 60601-2-30:2000 ; Medical electrical equipment — Part 2-30: Particular requirements for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment
  • EN 60601-2-33:2002 ; Medical electrical equipment — Part 2-33: Particular requirements for the safety of magnetic resonance equipment for medical diagnosis
  • EN 60601-2-33:2002/A1:2005 ; IEC 60601-2-33:2002/A1:2005
  • EN 60601-2-33:2002/A2:2008 ; IEC 60601-2-33:2002/A2:2007
  • EN 60601-2-34:2000 ; Medical electrical equipment — Part 2-34: Particular requirements for the safety, including essential performance, of invasive blood pressure monitoring equipment
  • EN 60601-2-35:1996 ; Medical electrical equipment — Part 2: Particular requirements for the safety of blankets, pads and mattresses, intended for heating in medical use
  • EN 60601-2-36:1997 ; Medical electrical equipment — Part 2: Particular requirements for the safety of equipment for extracorporeally induced lithotripsy
  • EN 60601-2-37:2008 ; Medical electrical equipment — Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
  • EN 60601-2-38:1996 ; Medical electrical equipment — Part 2-38: Particular requirements for the safety of electrically operated hospital beds
  • EN 60601-2-38:1996/A1:2000 ; IEC 60601-2-38:1996/A1:1999
  • EN 60601-2-39:2008 ; Medical electrical equipment — Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
  • EN 60601-2-4:2003 ; Medical electrical equipment — Part 2-4: Particular requirements for the safety of cardiac defibrillators
  • EN 60601-2-40:1998 ; Medical electrical equipment — Part 2-40: Particular requirements for the safety of electromyographs and evoked response equipment
  • EN 60601-2-41:2000 ; Medical electrical equipment — Part 2-41: Particular requirements for the safety of surgical luminaires and luminaires for diagnosis
  • EN 60601-2-41:2009 ; Medical electrical equipment — Part 2-41: Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis
  • EN 60601-2-43:2000 ; Medical electrical equipment — Part 2-43: Particular requirements for the safety of X-ray equipment for interventional procedures
  • EN 60601-2-43:2010 ; Medical electrical equipment — Part 2-43: Particular requirements for basic safety and essential performance of X-ray equipment for interventional procedures
  • EN 60601-2-44:2009 ; Medical electrical equipment — Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
  • EN 60601-2-45:2001 ; Medical electrical equipment — Part 2-45: Particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic devices
  • EN 60601-2-46:1998 ; Medical electrical equipment — Part 2-46: Particular requirements for the safety of operating tables
  • EN 60601-2-47:2001 ; Medical electrical equipment — Part 2-47: Particular requirements for the safety, including essential performance, of ambulatory electrocardiographic systems
  • EN 60601-2-49:2001 ; Medical electrical equipment — Part 2-49: Particular requirements for the safety of multifunction patient monitoring equipment
  • EN 60601-2-5:2000 ; Medical electrical equipment — Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment
  • EN 60601-2-50:2009 ; Medical electrical equipment — Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment
  • EN 60601-2-51:2003 ; Medical electrical equipment — Part 2-51: Particular requirements for safety, including essential performance, of recording and analysing single channel and multichannel electrocardiographs
  • EN 60601-2-52:2010 ; Medical electrical equipment — Part 2-52: Particular requirements for basic safety and essential performance of medical beds
  • EN 60601-2-54:2009 ; Medical electrical equipment — Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
  • EN 60601-2-8:1997 ; Medical electrical equipment — Part 2: Particular requirements for the safety of therapeutic X-ray equipment operating in the range 10 kV to 1 MV
  • EN 60601-2-8:1997/A1:1997 ; IEC 60601-2-8:1987/A1:1997
  • EN 60618:1997 ; Inductive voltage dividers
  • EN 60618:1997/A2:1997 ; IEC 60618:1978/A2:1997
  • EN 60627:2001 ; Diagnostic X-ray imaging equipment – Characteristics of general purpose and mammographic anti-scatter grids
  • EN 60645-1:2001 ; Electroacoustics – Audiological equipment — Part 1: Pure-tone audiometers
  • EN 60645-2:1997 ; Audiometers — Part 2: Equipment for speech audiometry
  • EN 60645-3:2007 ; Electroacoustics – Audiometric equipment — Part 3: Test signals of short duration
  • EN 60645-4:1995 ; Audiometers — Part 4: Equipment for extended high-frequency audiometry
  • EN 60645-6:2010 ; Electroacoustics – Audiometric equipment — Part 6: Instruments for the measurement of otoacoustic emissions
  • EN 60645-7:2010 ; Electroacoustics – Audiometric equipment — Part 7: Instruments for the measurement of auditory brainstem responses
  • EN 60662:1993 ; High-pressure sodium vapour lamps
  • EN 60662:1993/A10:1997 ; IEC 60662:1980/A10:1997
  • EN 60662:1993/A4:1994 ; IEC 60662:1980/A4:1992
  • EN 60662:1993/A5:1994 ; IEC 60662:1980/A5:1993
  • EN 60662:1993/A6:1994 ; IEC 60662:1980/A6:1994
  • EN 60662:1993/A7:1995 ; IEC 60662:1980/A7:1995
  • EN 60662:1993/A9:1997 ; IEC 60662:1980/A9:1997
  • EN 60664-1:2007 ; Insulation coordination for equipment within low-voltage systems — Part 1: Principles, requirements and tests
  • EN 60664-3:2003 ; Insulation coordination for equipment within low-voltage systems — Part 3: Use of coating, potting or moulding for protection against pollution
  • EN 60664-3:2003/A1:2010 ; IEC 60664-3:2003/A1:2010
  • EN 60664-4:2006 ; Insulation coordination for equipment within low-voltage systems — Part 4: Consideration of high-frequency voltage stress
  • EN 60664-4:2006/AC:2006 ; EN 60664-5:2007
  • EN 60664-5:2007 ; Insulation coordination for equipment within low-voltage systems — Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
  • EN 60669-1:1999 ; Switches for household and similar fixed-electrical installations — Part 1: General requirements
  • EN 60669-1:1999/A1:2002 ; IEC 60669-1:1998/A1:1999 (Modified)
  • EN 60669-1:1999/A2:2008 ; IEC 60669-1:1998/A2:2006 (Modified)
  • EN 60669-2-1:2004 ; Switches for household and similar fixed electrical installations — Part 2-1: Particular requirements – Electronic switches
  • EN 60669-2-1:2004/A1:2009 ; IEC 60669-2-1:2002/A1:2008 (Modified)
  • EN 60669-2-1:2004/A12:2010 ; EN 60669-2-1:2004/AC:2007
  • EN 60669-2-1:2004/AC:2007 ; EN 60669-2-2:2006
  • EN 60669-2-1:2004/AC:2007 ; EN 60730-1:1995
  • EN 60669-2-2:2006 ; Switches for household and similar fixed electrical installations — Part 2-2: Particular requirements – Electromagnetic remote-control switches (RCS)
  • EN 60669-2-3:2006 ; Switches for household and similar fixed electrical installations — Part 2-3: Particular requirements – Time delay switches (TDS)
  • EN 60669-2-4:2005 ; Switches for household and similar fixed electrical installations — Part 2-4: Particular requirements – Isolating switches
  • EN 60669-2-6:2012 (new) ; Switches for household and similar fixed electrical installations — Part 2-6: Particular requirements – Fireman’s switches for exterior and interior signs and luminaires
  • EN 60670-1:2005 ; Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 1: General requirements
  • EN 60670-1:2005/AC:2007 ; EN 60670-1:2005/AC:2010
  • EN 60670-1:2005/AC:2010 ; EN 60670-21:2007
  • EN 60670-21:2007 ; Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 21: Particular requirements for boxes and enclosures with provision for suspension means
  • EN 60670-22:2006 ; Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 22: Particular requirements for connecting boxes and enclosures
  • EN 60670-23:2008 ; Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 23: Particular requirements for floor boxes and enclosures
  • EN 60691:2003 ; Thermal-links – Requirements and application guide
  • EN 60691:2003/A1:2007 ; IEC 60691:2002/A1:2006
  • EN 60691:2003/A2:2010 ; IEC 60691:2002/A2:2010
  • EN 60695-10-2:2003 ; Fire hazard testing — Part 10-2: Abnormal heat – Ball pressure test
  • EN 60695-10-3:2002 ; Fire hazard testing — Part 10-3: Abnormal heat – Mould stress relief distortion test
  • EN 60695-1-1:2000 ; Fire hazard testing — Part 1-1: Guidance for assessing the fire hazard of electrotechnical products – General guidelines
  • EN 60695-11-10:1999 ; Fire hazard testing — Part 11-10: Test flames – 50 W horizontal and vertical flame test methods
  • EN 60695-11-10:1999/A1:2003 ; IEC 60695-11-10:1999/A1:2003
  • EN 60695-11-2:2003 ; Fire hazard testing — Part 11-2: Test flames – 1 kW nominal pre-mixed flame – Apparatus, confirmatory test arrangement and guidance
  • EN 60695-11-20:1999 ; Fire hazard testing — Part 11-20: Test flames – 500 W flame test methods
  • EN 60695-11-20:1999/A1:2003 ; IEC 60695-11-20:1999/A1:2003
  • EN 60695-11-4:2011 ; Fire hazard testing — Part 11-4: Test flames – 50 W flame – Apparatus and confirmational test method
  • EN 60695-11-5:2005 ; Fire hazard testing — Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance
  • EN 60695-2-10:2001 ; Fire hazard testing — Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure
  • EN 60695-2-11:2001 ; Fire hazard testing — Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products
  • EN 60695-2-12:2001 ; Fire hazard testing — Part 2-12: Glowing/hot-wire based test methods – Glow-wire flammability test method for materials
  • EN 60695-2-13:2001 ; Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods – Glow-wire ignitability test method for materials
  • EN 60702-1:2002 ; Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V — Part 1: Cables
  • EN 60702-2:2002 ; Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V — Part 2: Terminations
  • EN 60715:2001 ; Dimensions of low-voltage switchgear and controlgear – Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations
  • EN 60719:1993 ; Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
  • EN 60728-11:2005 ; Cable networks for television signals, sound signals and interactive services — Part 11: Safety
  • EN 60728-11:2010 ; Cable networks for television signals, sound signals and interactive services — Part 11: Safety
  • EN 60730-1:1991 ; Automatic electrical controls for household and similar use — Part 1: General requirements
  • EN 60730-1:1991/A1:1991 ; IEC 60730-1:1986/A1:1990
  • EN 60730-1:1991/AC:1993 ; EN 60730-1:1995
  • EN 60730-1:1995 ; Automatic electrical controls for household and similar use — Part 1: General requirements
  • EN 60730-1:1995/A1:1997 ; IEC 60730-1:1993/A1:1994 (Modified)
  • EN 60730-1:1995/A2:1998 ; IEC 60730-1:1993/A2:1997
  • EN 60730-1:1995/AC:1997 ; EN 60730-1:1995/AC:2007
  • EN 60730-1:1995/AC:1997 ; EN 60730-1:2000
  • EN 60730-1:1995/AC:2007 ; EN 60730-1:1995/AC:1997
  • EN 60730-1:1995/AC:2007 ; EN 60730-1:2000
  • EN 60730-1:2000 ; Automatic electrical controls for household and similar use — Part 1: General requirements
  • EN 60730-1:2000/A1:2004 ; IEC 60730-1:1999/A1:2003 (Modified)
  • EN 60730-1:2000/A16:2007/AC:2010 ; EN 60730-1:2011 (new)
  • EN 60730-1:2000/A2:2008 ; IEC 60730-1:1999/A2:2007 (Modified)
  • EN 60730-1:2000/AC:2007 ; EN 60730-1:2000/A16:2007/AC:2010
  • EN 60730-1:2000/AC:2007 ; EN 60730-1:2011 (new)
  • EN 60730-1:2011 (new) ; Automatic electrical controls for household and similar use — Part 1: General requirements
  • EN 60730-2-10:2007 ; Automatic electrical controls for household and similar use — Part 2-10: Particular requirements for motor-starting relays
  • EN 60730-2-11:2008 ; Automatic electrical controls for household and similar use — Part 2-11: Particular requirements for energy regulators
  • EN 60730-2-12:2006 ; Automatic electrical controls for household and similar use — Part 2-12: Particular requirements for electrically operated door locks
  • EN 60730-2-13:2008 ; Automatic electrical controls for household and similar use — Part 2-13: Particular requirements for humidity sensing controls
  • EN 60730-2-14:1997 ; Automatic electrical controls for household and similar use — Part 2-14: Particular requirements for electric actuators
  • EN 60730-2-14:1997/A1:2001 ; IEC 60730-2-14:1995/A1:2001
  • EN 60730-2-14:1997/A2:2008 ; IEC 60730-2-14:1995/A2:2007 (Modified)
  • EN 60730-2-15:1995 ; Automatic electrical controls for household and similar use — Part 2-15: Particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications
  • EN 60730-2-15:1995/A1:1998 ; IEC 60730-2-15:1994/A1:1997
  • EN 60730-2-15:1995/A1:1998/AC:2001 ; EN 60730-2-15:2010
  • EN 60730-2-15:2010 ; Automatic electrical controls for household and similar use — Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls
  • EN 60730-2-16:1997 ; Automatic electrical controls for household and similar use — Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications
  • EN 60730-2-16:1997/A1:1998 ; IEC 60730-2-16:1995/A1:1997
  • EN 60730-2-16:1997/A1:1998/AC:2000 ; EN 60730-2-18:1999
  • EN 60730-2-16:1997/A2:2001 ; IEC 60730-2-16:1995/A2:2001
  • EN 60730-2-18:1999 ; Automatic electrical controls for household and similar use — Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
  • EN 60730-2-19:2002 ; Automatic electrical controls for household and similar use — Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
  • EN 60730-2-19:2002/A2:2008 ; IEC 60730-2-19:1997/A2:2007
  • EN 60730-2-2:2002 ; Automatic electrical controls for household and similar use — Part 2-2: Particular requirements for thermal motor protectors
  • EN 60730-2-2:2002/A1:2006 ; IEC 60730-2-2:2001/A1:2005 (Modified)
  • EN 60730-2-3:2007 ; Automatic electrical controls for household and similar use — Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
  • EN 60730-2-4:2007 ; Automatic electrical controls for household and similar use — Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
  • EN 60730-2-5:2002 ; Automatic electrical controls for household and similar use — Part 2-5: Particular requirements for automatic electrical burner control systems
  • EN 60730-2-5:2002/A1:2004 ; IEC 60730-2-5:2000/A1:2004 (Modified)
  • EN 60730-2-5:2002/A2:2010 ; IEC 60730-2-5:2000/A2:2008 (Modified)
  • EN 60730-2-6:2008 ; Automatic electrical controls for household and similar use — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
  • EN 60730-2-7:1991 ; Automatic electrical controls for household and similar use — Part 2: Particular requirements for timers and time switches
  • EN 60730-2-7:1991/A1:1997 ; IEC 60730-2-7:1990/A1:1994 (Modified)
  • EN 60730-2-7:1991/A1:1997/AC:2001 ; EN 60730-2-7:1991/AC:2001
  • EN 60730-2-7:1991/A11:1994/AC:2001 ; EN 60730-2-7:1991/A12:1993/AC:2001
  • EN 60730-2-7:1991/A12:1993/AC:2001 ; EN 60730-2-7:1991/AC:1997
  • EN 60730-2-7:1991/AC:1997 ; EN 60730-2-7:1991/A1:1997/AC:2001
  • EN 60730-2-7:1991/AC:2001 ; EN 60730-2-7:2010
  • EN 60730-2-7:2010 ; Automatic electrical controls for household and similar use — Part 2-7: Particular requirements for timers and time switches
  • EN 60730-2-7:2010/AC:2011 ; EN 60730-2-8:2002
  • EN 60730-2-8:2002 ; Automatic electrical controls for household and similar use — Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
  • EN 60730-2-8:2002/A1:2003 ; IEC 60730-2-8:2000/A1:2002 (Modified)
  • EN 60730-2-9:2002 ; Automatic electrical controls for household and similar use — Part 2-9: Particular requirements for temperature sensing controls
  • EN 60730-2-9:2002/A1:2003 ; IEC 60730-2-9:2000/A1:2002 (Modified)
  • EN 60730-2-9:2002/A2:2005 ; IEC 60730-2-9:2000/A2:2004 (Modified)
  • EN 60730-2-9:2010 ; Automatic electrical controls for household and similar use — Part 2-9: Particular requirements for temperature sensing controls
  • EN 60743:2001 ; Live working – Terminology for tools, equipment and devices
  • EN 60743:2001/A1:2008 ; IEC 60743:2001/A1:2008
  • EN 60745-1:2009 ; Hand-held motor-operated electric tools – Safety — Part 1: General requirements
  • EN 60745-1:2009/A11:2010 ; EN 60745-1:2009/AC:2009
  • EN 60745-1:2009/AC:2009 ; EN 60745-2-1:2010
  • EN 60745-2-1:2010 ; Hand-held motor-operated electric tools – Safety — Part 2-1: Particular requirements for drills and impact drills
  • EN 60745-2-11:2010 ; Hand-held motor-operated electric tools – Safety — Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
  • EN 60745-2-12:2009 ; Hand-held motor-operated electric tools – Safety — Part 2-12: Particular requirements for concrete vibrators
  • EN 60745-2-13:2009 ; Hand-held motor-operated electric tools – Safety — Part 2-13: Particular requirements for chain saws
  • EN 60745-2-13:2009/A1:2010 ; IEC 60745-2-13:2006/A1:2009
  • EN 60745-2-14:2009 ; Hand-held motor-operated electric tools – Safety — Part 2-14: Particular requirements for planers
  • EN 60745-2-14:2009/A2:2010 ; IEC 60745-2-14:2003/A2:2010
  • EN 60745-2-15:2009 ; Hand-held motor-operated electric tools – Safety — Part 2-15: Particular requirements for hedge trimmers
  • EN 60745-2-16:2010 ; Hand-held motor-operated electric tools – Safety — Part 2-16: Particular requirements for tackers
  • EN 60745-2-17:2010 ; Hand-held motor-operated electric tools – Safety — Part 2-17: Particular requirements for routers and trimmers
  • EN 60745-2-18:2009 ; Hand-held motor-operated electric tools – Safety — Part 2-18: Particular requirements for strapping tools
  • EN 60745-2-19:2009 ; Hand-held motor-operated electric tools – Safety — Part 2-19: Particular requirements for jointers
  • EN 60745-2-19:2009/A1:2010 ; IEC 60745-2-19:2005/A1:2010
  • EN 60745-2-2:2010 ; Hand-held motor-operated electric tools – Safety — Part 2-2: Particular requirements for screwdrivers and impact wrenches
  • EN 60745-2-20:2009 ; Hand-held motor-operated electric tools – Safety — Part 2-20: Particular requirements for band saws
  • EN 60745-2-21:2009 ; Hand-held motor-operated electric tools – Safety — Part 2-21: Particular requirements for drain cleaners
  • EN 60745-2-21:2009/A1:2010 ; IEC 60745-2-21:2002/A1:2008
  • EN 60745-2-22:2011 ; Hand-held motor-operated electric tools – Safety — Part 2-22: Particular requirements for cut-off machines
  • EN 60745-2-3:2011 ; Hand-held motor-operated electric tools – Safety — Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
  • EN 60745-2-4:2009 ; Hand-held motor-operated electric tools – Safety — Part 2-4: Particular requirements for sanders and polishers other than disk type
  • EN 60745-2-4:2009/A11:2011 ; EN 60745-2-5:2010
  • EN 60745-2-5:2010 ; Hand-held motor-operated electric tools – Safety — Part 2-5: Particular requirements for circular saws
  • EN 60745-2-6:2010 ; Hand-held motor-operated electric tools – Safety — Part 2-6: Particular requirements for hammers
  • EN 60745-2-8:2009 ; Hand-held motor-operated electric tools – Safety — Part 2-8: Particular requirements for shears and nibblers
  • EN 60745-2-9:2009 ; Hand-held motor-operated electric tools – Safety — Part 2-9: Particular requirements for tappers
  • EN 60799:1998 ; Electrical accessories – Cord sets and interconnection cord sets
  • EN 60811-1-1:1995 ; Insulating and sheathing materials of electric and optical cables – Common test methods — Part 1-1: General application – Measurement of thickness and overall dimensions – Tests for determining the mechanical properties
  • EN 60811-1-1:1995/A1:2001 ; IEC 60811-1-1:1993/A1:2001
  • EN 60811-1-2:1995 ; Insulating and sheathing materials of electric cables – Common test methods — Part 1-2: General application – Thermal ageing methods
  • EN 60811-1-2:1995/A2:2000 ; IEC 60811-1-2:1985/A2:2000
  • EN 60811-1-3:1995 ; Insulating and sheathing materials of electric and optical cables – Common test methods — Part 1-3: General application – Methods for determining the density – Water absorption tests – Shrinkage test
  • EN 60811-1-3:1995/A1:2001 ; IEC 60811-1-3:1993/A1:2001
  • EN 60811-1-4:1995 ; Insulating and sheathing materials of electric and optical cables – Common test methods — Part 1-4: General application – Tests at low temperature
  • EN 60811-1-4:1995/A2:2001 ; IEC 60811-1-4:1985/A2:2001
  • EN 60811-2-1:1998 ; Insulating and sheathing materials of electric and optical cables – Common test methods — Part 2-1: Methods specific to elastomeric compounds – Ozone resistance, hot set and mineral oil immersion tests
  • EN 60811-2-1:1998/A1:2001 ; IEC 60811-2-1:1998/A1:2001
  • EN 60811-3-1:1995 ; Insulating and sheathing materials of electric and optical cables – Common test methods — Part 3-1: Methods specific to PVC compounds – Pressure test at high temperature – Tests for resistance to cracking
  • EN 60811-3-1:1995/A1:1996 ; IEC 60811-3-1:1985/A1:1994
  • EN 60811-3-1:1995/A2:2001 ; IEC 60811-3-1:1985/A2:2001
  • EN 60811-3-2:1995 ; Insulating and sheathing materials of electric and optical cables – Common test methods — Part 3-2: Methods specific to PVC compounds – Loss of mass test – Thermal stability test
  • EN 60811-3-2:1995/A2:2004 ; IEC 60811-3-2:1985/A2:2003
  • EN 60811-4-1:2004 ; Insulating and sheathing materials of electric and optical cables – Common test methods — Part 4-1: Methods specific to polyethylene and polypropylene compounds – Resistance to environmental stress cracking – Measurement of the melt flow index – Carbon black and/or mineral filler content measurement in polyethylene by direct combustion – Measurement of carbon black content by thermogravimetric analysis (TGA) – Assessment of carbon black dispersion in polyethylene using a microscope
  • EN 60811-4-2:2004 ; Insulating and sheathing materials of electric and optical cables – Common test methods — Part 4-2: Methods specific to polyethylene and polypropylene compounds – Tensile strength and elongation at break after conditioning at elevated temperature – Wrapping test after conditioning at elevated temperature – Wrapping test after thermal ageing in air – Measurement of mass increase – Long-term stability test – Test method for copper-catalyzed oxidative degradation
  • EN 60811-5-1:1999 ; Insulating and sheathing materials of electric and optical cables – Common test methods — Part 5-1: Methods specific to filling compounds – Drop point – Separation of oil – Lower temperature brittleness – Total acid number – Absence of corrosive components – Permittivity at 23 °C – D.C. resistivity at 23 °C and 100 °C
  • EN 60811-5-1:1999/A1:2004 ; IEC 60811-5-1:1990/A1:2003
  • EN 60825-1:2007 ; Safety of laser products — Part 1: Equipment classification and requirements
  • EN 60825-12:2004 ; Safety of laser products — Part 12: Safety of free space optical communication systems used for transmission of information
  • EN 60825-2:2004 ; Safety of laser products — Part 2: Safety of optical fibre communication systems (OFCS)
  • EN 60825-2:2004/A1:2007 ; IEC 60825-2:2004/A1:2006
  • EN 60825-2:2004/A2:2010 ; IEC 60825-2:2004/A2:2010
  • EN 60825-4:2006 ; Safety of laser products — Part 4: Laser guards
  • EN 60825-4:2006/A1:2008 ; IEC 60825-4:2006/A1:2008
  • EN 60825-4:2006/A2:2011 ; IEC 60825-4:2006/A2:2011
  • EN 60831-1:1996 ; Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 1: General – Performance, testing and rating – Safety requirements – Guide for installation and operation
  • EN 60831-1:1996/A1:2003 ; IEC 60831-1:1996/A1:2002
  • EN 60831-2:1996 ; Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 2: Ageing test, self-healing test and destruction test
  • EN 60838-1:2004 ; Miscellaneous lampholders — Part 1: General requirements and tests
  • EN 60838-1:2004/A1:2008 ; IEC 60838-1:2004/A1:2008
  • EN 60838-1:2004/A2:2011 ; IEC 60838-1:2004/A2:2011
  • EN 60838-2-1:1996 ; Miscellaneous lampholders — Part 2: Particular requirements — Section 1: Lampholders S14
  • EN 60838-2-1:1996/A1:1998 ; IEC 60838-2-1:1994/A1:1998
  • EN 60838-2-1:1996/A2:2004 ; IEC 60838-2-1:1994/A2:2004
  • EN 60838-2-2:2006 ; Miscellaneous lampholders — Part 2-2: Particular requirements – Connectors for LED-modules
  • EN 60870-2-1:1996 ; Telecontrol equipment and systems — Part 2: Operating conditions — Section 1: Power supply and electromagnetic compatibility
  • EN 60895:2003 ; Live working – Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c.
  • EN 60898-1:2003 ; Electrical accessories – Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for a.c. operation
  • EN 60898-1:2003/A1:2004 ; IEC 60898-1:2002/A1:2002 (Modified)
  • EN 60898-1:2003/AC:2004 ; EN 60898-2:2006
  • EN 60898-2:2006 ; Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations — Part 2: Circuit-breakers for a.c. and d.c. operation
  • EN 60903:2003 ; Live working – Gloves of insulating material
  • EN 609-1:1999+A2:2009 ; Agricultural and forestry machinery – Safety of log splitters – Part 1: Wedge splitters
  • EN 609-2:1999+A1:2009 ; Agricultural and forestry machinery – Safety of log splitters – Part 2: Screw splitters
  • EN 60931-1:1996 ; Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 1: General – Performance, testing and rating – Safety requirements – Guide for installation and operation
  • EN 60931-1:1996/A1:2003 ; IEC 60931-1:1996/A1:2002
  • EN 60931-2:1996 ; Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 2: Ageing test and destruction test
  • EN 60931-3:1996 ; Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 3: Internal fuses
  • EN 60934:2001 ; Circuit-breakers for equipment (CBE)
  • EN 60934:2001/A1:2007 ; IEC 60934:2000/A1:2007
  • EN 60945:2002 ; Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
  • EN 60947-1:2007 ; Low-voltage switchgear and controlgear — Part 1: General rules
  • EN 60947-1:2007/A1:2011 ; IEC 60947-1:2007/A1:2010
  • EN 60947-2:2006 ; Low-voltage switchgear and controlgear — Part 2: Circuit-breakers
  • EN 60947-2:2006/A1:2009 ; IEC 60947-2:2006/A1:2009
  • EN 60947-3:2009 ; Low-voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
  • EN 60947-3:2009/A1:2012 ; IEC 60947-3:2008/A1:2012 (new)
  • EN 60947-4-1:2001 ; Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
  • EN 60947-4-1:2001/A1:2002 ; IEC 60947-4-1:2000/A1:2002
  • EN 60947-4-1:2001/A2:2005 ; IEC 60947-4-1:2000/A2:2005
  • EN 60947-4-1:2010 ; Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
  • EN 60947-4-2:2000 ; Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters – AC semiconductor motor controllers and starters
  • EN 60947-4-2:2000/A1:2002 ; IEC 60947-4-2:1999/A1:2001
  • EN 60947-4-2:2000/A2:2006 ; IEC 60947-4-2:1999/A2:2006
  • EN 60947-4-3:2000 ; Low-voltage switchgear and controlgear — Part 4-3: Contactors and motor-starters – AC semiconductor controllers and contactors for non-motor loads
  • EN 60947-4-3:2000/A1:2006 ; IEC 60947-4-3:1999/A1:2006
  • EN 60947-4-3:2000/A2:2011 ; IEC 60947-4-3:1999/A2:2011
  • EN 60947-5-1:2004 ; Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements – Electromechanical control circuit devices
  • EN 60947-5-1:2004/A1:2009 ; IEC 60947-5-1:2003/A1:2009
  • EN 60947-5-1:2004/AC:2004 ; EN 60947-5-1:2004/AC:2005
  • EN 60947-5-1:2004/AC:2004 ; EN 60947-5-2:2007
  • EN 60947-5-1:2004/AC:2005 ; EN 60947-5-1:2004/AC:2004
  • EN 60947-5-1:2004/AC:2005 ; EN 60947-5-2:2007
  • EN 60947-5-2:2007 ; Low-voltage switchgear and controlgear — Part 5-2: Control circuit devices and switching elements – Proximity switches
  • EN 60947-5-3:1999 ; Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined behaviour under fault conditions (PDF)
  • EN 60947-5-3:1999/A1:2005 ; IEC 60947-5-3:1999/A1:2005
  • EN 60947-5-4:2003 ; Low-voltage switchgear and controlgear — Part 5-4: Control circuit devices and switching elements – Method of assessing the performance of low-energy contacts – Special tests
  • EN 60947-5-5:1997 ; Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function
  • EN 60947-5-5:1997/A1:2005 ; IEC 60947-5-5:1997/A1:2005
  • EN 60947-5-6:2000 ; Low-voltage switchgear and controlgear — Part 5-6: Control circuit devices and switching elements – DC interface for proximity sensors and switching amplifiers (NAMUR)
  • EN 60947-5-7:2003 ; Low-voltage switchgear and controlgear — Part 5-7: Control circuit devices and switching elements – Requirements for proximity devices with analogue output
  • EN 60947-5-8:2006 ; Low-voltage switchgear and controlgear — Part 5-8: Control circuit devices and switching elements – Three-position enabling switches
  • EN 60947-5-9:2007 ; Low-voltage switchgear and controlgear — Part 5-9: Control circuit devices and switching elements – Flow rate switches
  • EN 60947-6-1:2005 ; Low-voltage switchgear and controlgear — Part 6-1: Multiple function equipment – Transfer switching equipment
  • EN 60947-6-2:2003 ; Low-voltage switchgear and controlgear — Part 6-2: Multiple function equipment – Control and protective switching devices (or equipment) (CPS)
  • EN 60947-6-2:2003/A1:2007 ; IEC 60947-6-2:2002/A1:2007
  • EN 60947-7-1:2009 ; Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment – Terminal blocks for copper conductors
  • EN 60947-7-2:2009 ; Low-voltage switchgear and controlgear — Part 7-2: Ancillary equipment – Protective conductor terminal blocks for copper conductors
  • EN 60947-7-3:2002 ; Low-voltage switchgear and controlgear — Part 7-3: Ancillary equipment – Safety requirements for fuse terminal blocks
  • EN 60947-7-3:2009 ; Low-voltage switchgear and controlgear — Part 7-3: Ancillary equipment – Safety requirements for fuse terminal blocks
  • EN 60947-8:2003 ; Low-voltage switchgear and controlgear — Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
  • EN 60947-8:2003/A1:2006 ; IEC 60947-8:2003/A1:2006
  • EN 60950-1:2006 ; Information technology equipment – Safety — Part 1: General requirements
  • EN 60950-1:2006/A1:2010 ; IEC 60950-1:2005/A1:2009 (Modified)
  • EN 60950-1:2006/A12:2011 ; EN 60950-1:2006/A1:2010
  • EN 60950-1:2006/A12:2011 ; EN 60950-1:2006/AC:2011
  • EN 60950-1:2006/AC:2011 ; EN 60950-21:2003
  • EN 60950-1:2006/AC:2011 ; EN 60950-22:2006
  • EN 60950-21:2003 ; Information technology equipment – Safety — Part 21: Remote power feeding
  • EN 60950-22:2006 ; Information technology equipment – Safety — Part 22: Equipment installed outdoors
  • EN 60950-22:2006/AC:2008 ; EN 60950-23:2006
  • EN 60950-23:2006 ; Information technology equipment – Safety — Part 23: Large data storage equipment
  • EN 60950-23:2006/AC:2008 ; EN 60968:1990
  • EN 60950-23:2006/AC:2008 ; EN 61000-3-2:2006
  • EN 60968:1990 ; Self-ballasted lamps for general lighting services – Safety requirements
  • EN 60968:1990/A1:1993 ; IEC 60968:1988/A1:1991
  • EN 60968:1990/A2:1999 ; IEC 60968:1988/A2:1999
  • EN 60974-1:2005 ; Arc welding equipment — Part 1: Welding power sources
  • EN 60974-10:2007 ; Arc welding equipment — Part 10: Electromagnetic compatibility (EMC) requirements
  • EN 60974-11:2004 ; Arc welding equipment — Part 11: Electrode holders
  • EN 60974-11:2010 ; Arc welding equipment — Part 11: Electrode holders
  • EN 60974-12:2005 ; Arc welding equipment — Part 12: Coupling devices for welding cables
  • EN 60974-12:2011 ; Arc welding equipment — Part 12: Coupling devices for welding cables
  • EN 60974-13:2011 ; Arc welding equipment — Part 13: Welding clamp
  • EN 60974-2:2008 ; Arc welding equipment — Part 2: Liquid cooling systems
  • EN 60974-3:2007 ; Arc welding equipment — Part 3: Arc striking and stabilizing devices
  • EN 60974-5:2008 ; Arc welding equipment — Part 5: Wire feeders
  • EN 60974-6:2003 ; Arc welding equipment — Part 6: Limited duty manual metal arc welding power sources
  • EN 60974-6:2003/AC:2005 ; EN 60974-6:2011
  • EN 60974-6:2011 ; Arc welding equipment — Part 6: Limited duty equipment
  • EN 60974-7:2005 ; Arc welding equipment — Part 7:Torches
  • EN 60974-8:2009 ; Arc welding equipment — Part 8: Gas consoles for welding and plasma cutting systems
  • EN 60984:1992 ; Sleeves of insulating material for live working
  • EN 60984:1992/A1:2002 ; IEC 60984:1990/A1:2002
  • EN 60998-1:2004 ; Connecting devices for low-voltage circuits for household and similar purposes — Part 1: General requirements
  • EN 60998-2-1:2004 ; Connecting devices for low-voltage circuits for household and similar purposes — Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
  • EN 60998-2-2:2004 ; Connecting devices for low-voltage circuits for household and similar purposes — Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
  • EN 60998-2-3:2004 ; Connecting devices for low-voltage circuits for household and similar purposes — Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
  • EN 60998-2-4:2005 ; Connecting devices for low voltage circuits for household and similar purposes — Part 2-4: Particular requirements for twist-on connecting devices
  • EN 60999-1:2000 ; Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units — Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)
  • EN 60999-2:2003 ; Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units — Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included)
  • EN 61000-3-11:2000 ; Electromagnetic compatibility (EMC) — Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current <= 75 A and subject to conditional connection
  • EN 61000-3-12:2005 ; Electromagnetic compatibility (EMC) — Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase
  • EN 61000-3-12:2011 (new) ; Electromagnetic compatibility (EMC) — Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase
  • EN 61000-3-2:2006 ; Electromagnetic compatibility (EMC) — Part 3-2: Limits – Limits for harmonic current emissions (equipment input current <= 16 A per phase)
  • EN 61000-3-2:2006/A1:2009 ; IEC 61000-3-2:2005/A1:2008
  • EN 61000-3-2:2006/A2:2009 ; IEC 61000-3-2:2005/A2:2009
  • EN 61000-3-3:2008 ; Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
  • EN 61000-6-1:2007 ; Electromagnetic compatibility (EMC) — Part 6-1: Generic standards – Immunity for residential, commercial and light-industrial environments
  • EN 61000-6-2:2005 ; Electromagnetic compatibility (EMC) — Part 6-2: Generic standards – Immunity for industrial environments
  • EN 61000-6-2:2005/AC:2005 ; EN 61000-6-3:2007
  • EN 61000-6-3:2007 ; Electromagnetic compatibility (EMC) — Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
  • EN 61000-6-3:2007/A1:2011 ; IEC 61000-6-3:2006/A1:2010
  • EN 61000-6-4:2007 ; Electromagnetic compatibility (EMC) — Part 6-4: Generic standards – Emission standard for industrial environments
  • EN 61000-6-4:2007/A1:2011 ; IEC 61000-6-4:2006/A1:2010
  • EN 61008-1:2004 ; Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB’s) — Part 1: General rules
  • EN 61008-2-1:1994 ; Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB’s) — Part 2-1: Applicability of the general rules to RCCB’s functionally independent of line voltage
  • EN 61008-2-1:1994/A11:1998/AC:1999 ; EN 61009-1:2004
  • EN 61009-1:2004 ; Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO’s) — Part 1: General rules
  • EN 61009-1:2004/AC:2006 ; EN 61009-2-1:1994
  • EN 61009-1:2004/AC:2006 ; EN 61131-2:2007
  • EN 61009-2-1:1994 ; Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO’s) — Part 2-1: Applicability of the general rules to RCBO’s functionally independent of line voltage
  • EN 61009-2-1:1994/A11:1998/AC:1999 ; EN 61010-1:2001
  • EN 61010-031:2002 ; Safety requirements for electrical equipment for measurement, control and laboratory use — Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
  • EN 61010-031:2002/A1:2008 ; IEC 61010-031:2002/A1:2008
  • EN 61010-1:2001 ; Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements
  • EN 61010-1:2001/AC:2002 ; EN 61010-1:2010
  • EN 61010-1:2010 ; Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements
  • EN 61010-2-010:2003 ; Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of material
  • EN 61010-2-020:2006 ; Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-020: Particular requirements for laboratory centrifuges
  • EN 61010-2-030:2010 ; Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-030: Particular requirements for testing and measuring circuits
  • EN 61010-2-032:2002 ; Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
  • EN 61010-2-040:2005 ; Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
  • EN 61010-2-051:2003 ; Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
  • EN 61010-2-061:2003 ; Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
  • EN 61010-2-081:2002 ; Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
  • EN 61010-2-081:2002/A1:2003 ; IEC 61010-2-081:2001/A1:2003
  • EN 61010-2-101:2002 ; Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
  • EN 61028:1993 ; Electrical measuring instruments – X-Y recorders
  • EN 61028:1993/A2:1997 ; IEC 61028:1991/A2:1997
  • EN 61029-1:2009 ; Safety of transportable motor-operated electric tools — Part 1: General requirements
  • EN 61029-1:2009/A11:2010 ; EN 61029-1:2009/AC:2009
  • EN 61029-1:2009/AC:2009 ; EN 61029-2-1:2010
  • EN 61029-2-1:2010 ; Safety of transportable motor-operated electric tools — Part 2-1: Particular requirements for circular saw benches
  • EN 61029-2-10:2010 ; Safety of transportable motor-operated electric tools — Part 2-10: Particular requirements for cutting-off grinders
  • EN 61029-2-11:2009 ; Safety of transportable motor-operated electric tools — Part 2-11: Particular requirements for combined mitre and bench saws
  • EN 61029-2-12:2011 ; Safety of transportable motor-operated electric tools — Part 2-12: Particular requirements for threading machines
  • EN 61029-2-3:2011 ; Safety of transportable motor-operated electric tools — Part 2-3: Particular requirements for planers and thicknessers
  • EN 61029-2-4:2011 ; Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders
  • EN 61029-2-6:2010 ; Safety of transportable motor-operated electric tools — Part 2-6: Particular requirements for diamond drills with water supply
  • EN 61029-2-8:2010 ; Safety of transportable motor-operated electric tools — Part 2-8: Particular requirements for single spindle vertical moulders
  • EN 61029-2-9:2009 ; Safety of transportable motor-operated electric tools — Part 2-9: Particular requirements for mitre saws
  • EN 61034-1:2005 ; Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
  • EN 61034-2:2005 ; Measurement of smoke density of cables burning under defined conditions — Part 2: Test procedure and requirements
  • EN 61048:2006 ; Auxiliaries for lamps – Capacitors for use in tubular fluorescent and other discharge lamp circuits – General and safety requirements
  • EN 61050:1992 ; Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (generally called neon-transformers) – General and safety requirements
  • EN 61050:1992/A1:1995 ; IEC 61050:1991/A1:1994 (Modified)
  • EN 61058-1:2002 ; Switches for appliances — Part 1: General requirements
  • EN 61058-1:2002/A2:2008 ; IEC 61058-1:2000/A2:2007
  • EN 61058-2-1:1993 ; Switches for appliances — Part 2-1: Particular requirements for cord switches
  • EN 61058-2-1:1993/A1:1996 ; IEC 61058-2-1:1992/A1:1995
  • EN 61058-2-1:2011 ; Switches for appliances — Part 2-1: Particular requirements for cord switches
  • EN 61058-2-4:2005 ; Switches for appliances — Part 2-4: Particular requirements for independently mounted switches
  • EN 61058-2-5:1994 ; Switches for appliances — Part 2-5: Particular requirements for change-over selectors
  • EN 61058-2-5:2011 ; Switches for appliances — Part 2-5: Particular requirements for change-over selectors
  • EN 61071:2007 ; Capacitors for power electronics
  • EN 61095:2009 ; Electromechanical contactors for household and similar purposes
  • EN 61131-2:2007 ; Programmable controllers — Part 2: Equipment requirements and tests
  • EN 61138:2007 ; Cables for portable earthing and short-circuiting equipment
  • EN 61140:2002 ; Protection against electric shock – Common aspects for installation and equipment
  • EN 61140:2002/A1:2006 ; IEC 61140:2001/A1:2004 (Modified)
  • EN 61143-1:1994 ; Electrical measuring instruments – X-t recorders — Part 1: Definitions and requirements
  • EN 61143-1:1994/A1:1997 ; IEC 61143-1:1992/A1:1997
  • EN 61143-2:1994 ; Electrical measuring instruments – X-t recorders — Part 2: Recommended additional test methods
  • EN 61167:1994 ; Metal halide lamps
  • EN 61167:1994/A1:1995 ; IEC 61167:1992/A1:1995
  • EN 61167:1994/A2:1997 ; IEC 61167:1992/A2:1997
  • EN 61167:1994/A3:1998 ; IEC 61167:1992/A3:1998
  • EN 61184:2008 ; Bayonet lampholders
  • EN 61184:2008/A1:2011 ; IEC 61184:2008/A1:2011
  • EN 61187:1994 ; Electrical and electronic measuring equipment – Documentation
  • EN 61187:1994/AC:1995 ; EN 61195:1999
  • EN 61195:1999 ; Double-capped fluorescent lamps – Safety specifications
  • EN 61199:1999 ; Single-capped fluorescent lamps – Safety specifications
  • EN 61199:2011 ; Single-capped fluorescent lamps – Safety specifications
  • EN 61204:1995 ; Low-voltage power supply devices, d.c. output – Performance characteristics
  • EN 61204-3:2000 ; Low voltage power supplies, d.c. output — Part 3: Electromagnetic compatibility (EMC)
  • EN 61204-7:2006 ; Low voltage power supplies, d.c. output — Part 7: Safety requirements
  • EN 61210:1995 ; Connecting devices – Flat quick-connect terminations for electrical copper conductors – Safety requirements
  • EN 61210:2010 ; Connecting devices – Flat quick-connect terminations for electrical copper conductors – Safety requirements
  • EN 61217:1996 ; Radiotherapy equipment – Coordinates, movements and scales
  • EN 61217:1996/A1:2001 ; IEC 61217:1996/A1:2000
  • EN 61217:1996/A2:2008 ; IEC 61217:1996/A2:2007
  • EN 61217:2012 ; Radiotherapy equipment – Coordinates, movements and scales
  • EN 61230:2008 ; Live working – Portable equipment for earthing or earthing and short-circuiting
  • EN 61236:1995 ; Saddles, pole clamps (stick clamps) and accessories for live working
  • EN 61241-4:2006 ; Electrical apparatus for use in the presence of combustible dust — Part 4: Type of protection “pD”
  • EN 61242:1997 ; Electrical accessories – Cable reels for household and similar purposes
  • EN 61242:1997/A1:2008 ; IEC 61242:1995/A1:2008
  • EN 61243-3:1998 ; Live working – Voltage detectors — Part 3: Two-pole low-voltage type
  • EN 61243-3:1998/AC:2002 ; EN 61243-3:2010
  • EN 61243-3:2010 ; Live working – Voltage detectors — Part 3: Two-pole low-voltage type
  • EN 61270-1:1996 ; Capacitors for microwave ovens — Part 1: General
  • EN 61293:1994 ; Marking of electrical equipment with ratings related to electrical supply – Safety requirements
  • EN 613:2000 ; Independent gas-fired convection heaters
  • EN 61310-1:2008 ; Safety of machinery – Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals
  • EN 61310-2:2008 ; Safety of machinery – Indication, marking and actuation — Part 2: Requirements for marking
  • EN 61310-3:2008 ; Safety of machinery – Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators
  • EN 61316:1999 ; Industrial cable reels
  • EN 61326-1:2006 ; Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 1: General requirements
  • EN 61326-2-1:2006 ; Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 2-1: Particular requirements – Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
  • EN 61326-2-2:2006 ; Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 2-2: Particular requirements – Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
  • EN 61326-2-3:2006 ; Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 2-3: Particular requirements – Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
  • EN 61326-2-4:2006 ; Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 2-4: Particular requirements – Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
  • EN 61326-2-5:2006 ; Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 2-5: Particular requirements – Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2
  • EN 61326-2-6:2006 ; Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment
  • EN 61347-1:2008 ; Lamp controlgear — Part 1: General and safety requirements
  • EN 61347-1:2008/A1:2011 ; IEC 61347-1:2007/A1:2010
  • EN 61347-2-10:2001 ; Lamp controlgear — Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
  • EN 61347-2-10:2001/A1:2009 ; IEC 61347-2-10:2000/A1:2008
  • EN 61347-2-10:2001/AC:2010 ; EN 61347-2-11:2001
  • EN 61347-2-11:2001 ; Lamp controlgear — Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
  • EN 61347-2-11:2001/AC:2002 ; EN 61347-2-12:2005
  • EN 61347-2-11:2001/AC:2010 ; EN 61347-2-11:2001/AC:2002
  • EN 61347-2-12:2005 ; Lamp controlgear — Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • EN 61347-2-12:2005/A1:2010 ; IEC 61347-2-12:2005/A1:2010
  • EN 61347-2-12:2005/AC:2010 ; EN 61347-2-13:2006
  • EN 61347-2-13:2006 ; Lamp controlgear — Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
  • EN 61347-2-13:2006/AC:2010 ; EN 61386-1:2008
  • EN 61347-2-2:2001 ; Lamp controlgear — Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
  • EN 61347-2-2:2001/A1:2006 ; IEC 61347-2-2:2000/A1:2005
  • EN 61347-2-2:2001/A1:2006/AC:2006 ; EN 61347-2-2:2001/AC:2003
  • EN 61347-2-2:2001/A2:2006 ; IEC 61347-2-2:2000/A2:2006
  • EN 61347-2-2:2001/AC:2003 ; EN 61347-2-2:2012 (new)
  • EN 61347-2-2:2001/AC:2010 ; EN 61347-2-2:2001/A1:2006/AC:2006
  • EN 61347-2-2:2012 (new) ; Lamp controlgear — Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
  • EN 61347-2-3:2001 ; Lamp controlgear — Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
  • EN 61347-2-3:2001/A1:2004 ; IEC 61347-2-3:2000/A1:2004
  • EN 61347-2-3:2001/A2:2006 ; IEC 61347-2-3:2000/A2:2006
  • EN 61347-2-3:2001/AC:2003 ; EN 61347-2-3:2001/AC:2010
  • EN 61347-2-3:2001/AC:2010 ; EN 61347-2-3:2011
  • EN 61347-2-3:2011 ; Lamp control gear — Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
  • EN 61347-2-3:2011/AC:2011 ; EN 61347-2-4:2001
  • EN 61347-2-4:2001 ; Lamp controlgear — Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting
  • EN 61347-2-4:2001/AC:2003 ; EN 61347-2-7:2006
  • EN 61347-2-4:2001/AC:2010 ; EN 61347-2-4:2001/AC:2003
  • EN 61347-2-7:2006 ; Lamp controlgear — Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting
  • EN 61347-2-7:2006/AC:2010 ; EN 61347-2-7:2012 (new)
  • EN 61347-2-7:2012 (new) ; Lamp controlgear — Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
  • EN 61347-2-8:2001 ; Lamp controlgear — Part 2-8: Particular requirements for ballasts for fluorescent lamps
  • EN 61347-2-8:2001/A1:2006 ; IEC 61347-2-8:2000/A1:2006
  • EN 61347-2-8:2001/AC:2003 ; EN 61347-2-9:2001
  • EN 61347-2-8:2001/AC:2010 ; EN 61347-2-8:2001/AC:2003
  • EN 61347-2-9:2001 ; Lamp controlgear — Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
  • EN 61347-2-9:2001/A1:2003 ; IEC 61347-2-9:2000/A1:2003
  • EN 61347-2-9:2001/A2:2006 ; IEC 61347-2-9:2000/A2:2006
  • EN 61347-2-9:2001/AC:2003 ; EN 61347-2-9:2001/AC:2010
  • EN 61347-2-9:2001/AC:2010 ; EN 61347-2-10:2001
  • EN 61386-1:2008 ; Conduit systems for cable management — Part 1: General requirements
  • EN 61386-21:2004 ; Conduit systems for cable management — Part 21: Particular requirements – Rigid conduit systems
  • EN 61386-21:2004/A11:2010 ; EN 61386-21:2004/AC:2004
  • EN 61386-21:2004/AC:2004 ; EN 61386-22:2004
  • EN 61386-22:2004 ; Conduit systems for cable management — Part 22: Particular requirements – Pliable conduit systems
  • EN 61386-22:2004/A11:2010 ; EN 61386-22:2004/AC:2004
  • EN 61386-22:2004/AC:2004 ; EN 61386-23:2004
  • EN 61386-23:2004 ; Conduit systems for cable management — Part 23: Particular requirements – Flexible conduit systems
  • EN 61386-23:2004/A11:2010 ; EN 61386-23:2004/AC:2004
  • EN 61386-23:2004/AC:2004 ; EN 61386-24:2010
  • EN 61386-24:2010 ; Conduit systems for cable management — Part 24: Particular requirements – Conduit systems buried underground
  • EN 61386-25:2011 (new) ; Conduit systems for cable management — Part 25: Particular requirements – Conduit fixing devices
  • EN 614-1:2006+A1:2009 ; Safety of machinery – Ergonomic design principles – Part 1: Terminology and general principles
  • EN 614-2:2000+A1:2008 ; Safety of machinery – Ergonomic design principles – Part 2: Interactions between the design of machinery and work tasks
  • EN 61439-1:2009 ; Low-voltage switchgear and controlgear assemblies — Part 1: General rules
  • EN 61439-1:2011 ; Low-voltage switchgear and controlgear assemblies — Part 1: General rules
  • EN 61439-2:2009 ; Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies
  • EN 61439-2:2011 ; Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies
  • EN 61439-3:2012 (new) ; Low-voltage switchgear and controlgear assemblies — Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
  • EN 61439-5:2011 ; Low-voltage switchgear and controlgear assemblies — Part 5: Assemblies for power distribution in public networks
  • EN 61496-1:2004 ; Safety of machinery – Electro-sensitive protective equipment — Part 1: General requirements and tests
  • EN 61496-1:2004/A1:2008 ; IEC 61496-1:2004/A1:2007
  • EN 61496-1:2004/AC:2010 ; EN 61800-5-2:2007
  • EN 61534-1:2003 ; Powertrack systems — Part 1: General requirements
  • EN 61534-1:2011 ; Powertrack systems — Part 1: General requirements
  • EN 61534-21:2006 ; Powertrack systems — Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
  • EN 61534-22:2009 ; Powertrack systems — Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation
  • EN 61535:2009 ; Installation couplers intended for permanent connection in fixed installations
  • EN 61537:2007 ; Cable management – Cable tray systems and cable ladder systems
  • EN 61543:1995 ; Residual current-operated protective devices (RCDs) for household and similar use – Electromagnetic compatibility
  • EN 61543:1995/A11:2003/AC:2004 ; EN 61547:1995
  • EN 61543:1995/A2:2006 ; IEC 61543:1995/A2:2005
  • EN 61543:1995/AC:1997 ; EN 61543:1995/A11:2003/AC:2004
  • EN 61547:1995 ; Equipment for general lighting purposes – EMC immunity requirements
  • EN 61547:1995/A1:2000 ; IEC 61547:1995/A1:2000
  • EN 61547:2009 ; Equipment for general lighting purposes – EMC immunity requirements
  • EN 61549:2003 ; Miscellaneous lamps
  • EN 61549:2003/A1:2005 ; IEC 61549:2003/A1:2005
  • EN 61549:2003/A2:2010 ; IEC 61549:2003/A2:2010
  • EN 61557-1:2007 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 1: General requirements
  • EN 61557-10:2001 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures
  • EN 61557-11:2009 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems
  • EN 61557-12:2008 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 12: Performance measuring and monitoring devices (PMD)
  • EN 61557-13:2011 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems
  • EN 61557-2:2007 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 2: Insulation resistance
  • EN 61557-3:2007 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 3: Loop impedance
  • EN 61557-4:2007 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 4: Resistance of earth connection and equipotential bonding
  • EN 61557-5:2007 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 5: Resistance to earth
  • EN 61557-6:2007 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems
  • EN 61557-7:2007 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 7: Phase sequence
  • EN 61557-8:2007 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 8: Insulation monitoring devices for IT systems
  • EN 61557-9:2009 ; Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 9: Equipment for insulation fault location in IT systems
  • EN 61558-1:1997 ; Safety of power transformers, power supply units and similar — Part 1: General requirements and tests
  • EN 61558-1:1997/A1:1998 ; IEC 61558-1:1997/A1:1998
  • EN 61558-1:1997/AC:2003 ; EN 61558-1:2005
  • EN 61558-1:2005 ; Safety of power transformers, power supplies, reactors and similar products — Part 1: General requirements and tests
  • EN 61558-1:2005/A1:2009 ; IEC 61558-1:2005/A1:2009
  • EN 61558-1:2005/AC:2006 ; EN 61558-2-1:2007
  • EN 61558-2-1:2007 ; Safety of power transformers, power supplies, reactors and similar products — Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
  • EN 61558-2-12:2001 ; Safety of power transformers, power supply units and similar devices — Part 2-12: Particular requirements for constant voltage transformers
  • EN 61558-2-12:2011 ; Safety of transformers, reactors, power supply units and combinations thereof — Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
  • EN 61558-2-13:2009 ; Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
  • EN 61558-2-15:2001 ; Safety of power transformers, power supply units and similar — Part 2-15: Particular requirements for isolating transformers for the supply of medical locations
  • EN 61558-2-15:2001/AC:2003 ; EN 61558-2-15:2012 (new)
  • EN 61558-2-15:2001/AC:2004 ; EN 61558-2-15:2001/AC:2003
  • EN 61558-2-15:2012 (new) ; Safety of transformers, reactors, power supply units and combinations thereof — Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations
  • EN 61558-2-16:2009 ; Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
  • EN 61558-2-17:1997 ; Safety of power transformers, power supply units and similar — Part 2-17: Particular requirements for transformers for switch mode power supplies
  • EN 61558-2-2:2007 ; Safety of power transformers, power supplies, reactors and similar products — Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers
  • EN 61558-2-20:2000 ; Safety of power transformers, power supply units and similar devices — Part 2-20: Particular requirements for small reactors
  • EN 61558-2-20:2011 ; Safety of transformers, reactors, power supply units and combinations thereof — Part 2-20: Particular requirements and tests for small reactors
  • EN 61558-2-23:2000 ; Safety of power transformers, power supply units and similar devices — Part 2-23: Particular requirements for transformers for construction sites
  • EN 61558-2-23:2010 ; Safety of transformers, reactors, power supply units and combinations thereof — Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
  • EN 61558-2-3:2000 ; Safety of power transformers, power supply units and similar devices — Part 2-3: Particular requirements for ignition transformers for gas and oil burners
  • EN 61558-2-3:2010 ; Safety of transformers, reactors, power supply units and combinations thereof — Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners
  • EN 61558-2-4:2009 ; Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
  • EN 61558-2-5:1998 ; Safety of power transformers, power supply units and similar — Part 2-5: Particular requirements for shaver transformers and shaver supply units
  • EN 61558-2-5:2010 ; Safety of transformers, reactors, power supply units and combinations thereof — Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units
  • EN 61558-2-6:1997 ; Safety of power transformers, power supply units and similar — Part 2-6: Particular requirements for safety isolating transformers for general use
  • EN 61558-2-6:2009 ; Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
  • EN 61558-2-7:2007 ; Safety of power transformers, power supplies, reactors and similar products — Part 2-7: Particular requirements and tests for transformers and power supplies for toys
  • EN 61558-2-8:1998 ; Safety of power transformers, power supply units and similar — Part 2-8: Particular requirements for bell and chime transformers
  • EN 61558-2-8:2010 ; Safety of transformers, reactors, power supply units and combinations thereof — Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes
  • EN 61558-2-9:2003 ; Safety of power transformers, power supply units and similar products — Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps
  • EN 61558-2-9:2011 ; Safety of transformers, reactors, power supply units and combinations thereof — Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
  • EN 61643-11:2002 ; Low-voltage surge protective devices — Part 11: Surge protective devices connected to low-voltage power systems – Requirements and tests
  • EN 61643-21:2001 ; Low voltage surge protective devices — Part 21: Surge protective devices connected to telecommunications and signalling networks – Performance requirements and testing methods
  • EN 61643-21:2001/A1:2009 ; IEC 61643-21:2000/A1:2008 (Modified)
  • EN 61676:2002 ; Medical electrical equipment – Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
  • EN 61676:2002/A1:2009 ; IEC 61676:2002/A1:2008
  • EN 617:2001+A1:2010 ; Continuous handling equipment and systems – Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
  • EN 61730-1:2007 ; Photovoltaic (PV) module safety qualification — Part 1: Requirements for construction
  • EN 61730-1:2007/A1:2012 ; IEC 61730-1:2004/A1:2011 (new)
  • EN 61730-2:2007 ; Photovoltaic (PV) module safety qualification — Part 2: Requirements for testing
  • EN 61730-2:2007/A1:2012 ; IEC 61730-2:2004/A1:2011 (new)
  • EN 61770:2009 ; Electric appliances connected to the water mains – Avoidance of backsiphonage and failure of hose-sets
  • EN 61770:2009/AC:2011 ; EN 61800-5-1:2007
  • EN 618:2002+A1:2010 ; Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
  • EN 61800-3:2004 ; Adjustable speed electrical power drive systems — Part 3: EMC requirements and specific test methods
  • EN 61800-3:2004/A1:2012 ; IEC 61800-3:2004/A1:2011 (new)
  • EN 61800-5-1:2007 ; Adjustable speed electrical power drive systems — Part 5-1: Safety requirements – Electrical, thermal and energy
  • EN 61800-5-2:2007 ; Adjustable speed electrical power drive systems — Part 5-2: Safety requirements – Functional
  • EN 61812-1:1996 ; Specified time relays for industrial use — Part 1: Requirements and tests
  • EN 61812-1:1996/AC:1999 ; EN 61812-1:2011
  • EN 61812-1:2011 ; Time relays for industrial and residential use — Part 1: Requirements and tests
  • EN 61851-1:2001 ; Electric vehicle conductive charging system — Part 1: General requirements
  • EN 61851-1:2011 ; Electric vehicle conductive charging system — Part 1: General requirements
  • EN 61851-21:2002 ; Electric vehicle conductive charging system — Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply
  • EN 61851-22:2002 ; Electric vehicle conductive charging system — Part 22: AC electric vehicle charging station
  • EN 61869-1:2009 ; Instrument transformers — Part 1: General requirements
  • EN 61869-3:2011 ; Instrument transformers — Part 3: Additional requirements for inductive voltage transformers
  • EN 61869-5:2011 ; Instrument transformers — Part 5: Additional requirements for capacitor voltage transformers
  • EN 619:2002+A1:2010 ; Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of unit loads
  • EN 61914:2009 ; Cable cleats for electrical installations
  • EN 61914:2009/AC:2009 ; EN 61921:2003
  • EN 61921:2003 ; Power capacitors – Low-voltage power factor correction banks
  • EN 61995-1:2008 ; Devices for the connection of luminaires for household and similar purposes — Part 1: General requirements
  • EN 61995-2:2009 ; Devices for the connection of luminaires for household and similar purposes — Part 2: Standard sheets for DCL
  • EN 620:2002+A1:2010 ; Continuous handling equipment and systems – Safety and EMC requirements for fixed belt conveyors for bulk materials
  • EN 62013-1:2006 ; Caplights for use in mines susceptible to firedamp — Part 1: General requirements – Construction and testing in relation to the risk of explosion
  • EN 62020:1998 ; Electrical accessories – Residual current monitors for household and similar uses (RCMs)
  • EN 62020:1998/A1:2005 ; IEC 62020:1998/A1:2003 (Modified)
  • EN 62026-1:2007 ; Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) — Part 1: General rules
  • EN 62026-3:2009 ; Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) — Part 3: DeviceNet
  • EN 62031:2008 ; LED modules for general lighting – Safety specifications
  • EN 62035:2000 ; Discharge lamps (excluding fluorescent lamps) – Safety specifications
  • EN 62035:2000/A1:2003 ; IEC 62035:1999/A1:2003 (Modified)
  • EN 62040-1:2008 ; Uninterruptible power systems (UPS) — Part 1: General and safety requirements for UPS
  • EN 62040-1:2008/AC:2009 ; EN 62080:2009
  • EN 62040-2:2006 ; Uninterruptible power systems (UPS) — Part 2: Electromagnetic compatibility (EMC) requirements
  • EN 62040-2:2006/AC:2006 ; EN 62052-11:2003
  • EN 62052-11:2003 ; Electricity metering equipment (AC) – General requirements, tests and test conditions — Part 11: Metering equipment
  • EN 62052-21:2004 ; Electricity metering equipment (a.c.) – General requirements, tests and test conditions — Part 21: Tariff and load control equipment
  • EN 62053-11:2003 ; Electricity metering equipment (a.c.) – Particular requirements — Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
  • EN 62053-21:2003 ; Electricity metering equipment (a.c.) – Particular requirements — Part 21: Static meters for active energy (classes 1 and 2)
  • EN 62053-22:2003 ; Electricity metering equipment (a.c.) – Particular requirements — Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
  • EN 62053-23:2003 ; Electricity metering equipment (a.c.) – Particular requirements — Part 23: Static meters for reactive energy (classes 2 and 3)
  • EN 62054-11:2004 ; Electricity metering (a.c.) – Tariff and load control — Part 11: Particular requirements for electronic ripple control receivers
  • EN 62054-21:2004 ; Electricity metering (a.c.) – Tariff and load control — Part 21: Particular requirements for time switches
  • EN 62058-11:2010 ; Electricity metering equipment (a.c.) – Acceptance inspection — Part 11: General acceptance inspection methods
  • EN 62058-21:2010 ; Electricity metering equipment (a.c.) – Acceptance inspection — Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B)
  • EN 62058-31:2010 ; Electricity metering equipment (a.c.) – Acceptance inspection — Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C)
  • EN 62059-32-1:2012 (new) ; Electricity metering equipment – Dependability — Part 32-1: Durability – Testing of the stability of metrological characteristics by applying elevated temperature
  • EN 62061:2005 ; Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems
  • EN 62080:2009 ; Sound signalling devices for household and similar purposes
  • EN 62083:2001 ; Medical electrical equipment — Requirements for the safety of radiotherapy treatment planning systems
  • EN 62083:2009 ; Medical electrical equipment – Requirements for the safety of radiotherapy treatment planning systems
  • EN 62094-1:2003 ; Indicator light units for household and similar fixed-electrical installations — Part 1: General requirements
  • EN 621:2009 ; Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
  • EN 62109-1:2010 ; Safety of power converters for use in photovoltaic power systems — Part 1: General requirements
  • EN 62109-2:2011 ; Safety of power converters for use in photovoltaic power systems — Part 2: Particular requirements for inverters
  • EN 62115:2005 ; Electric toys – Safety
  • EN 62115:2005/A11:2012(new) ; EN 62115:2005/A2:2011/AC:2011
  • EN 62115:2005/A2:2011 ; IEC 62115:2003/A2:2010 (Modified)
  • EN 62115:2005/A2:2011/AC:2011 ; Reference
  • EN 62135-1:2008 ; Resistance welding equipment — Part 1: Safety requirements for design, manufacture and installation
  • EN 62135-2:2008 ; Resistance welding equipment — Part 2: Electromagnetic compatibility (EMC) requirements
  • EN 62196-1:2003 ; Plugs, socket-outlets, vehicle couplers and vehicle inlets – Conductive charging of electric vehicles — Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c.
  • EN 62196-1:2012 (new) ; Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles — Part 1: General requirements
  • EN 62196-2:2012 (new) ; Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles — Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
  • EN 62208:2003 ; Empty enclosures for low-voltage switchgear and controlgear assemblies – General requirements
  • EN 62208:2011 ; Empty enclosures for low-voltage switchgear and controlgear assemblies – General requirements
  • EN 62220-1:2004 ; Medical electrical equipment – Characteristics of digital X-ray imaging devices — Part 1: Determination of the detective quantum efficiency
  • EN 62220-1-2:2007 ; Medical electrical equipment – Characteristics of digital X-ray imaging devices — Part 1-2: Determination of the detective quantum efficiency – Detectors used in mammography
  • EN 62220-1-3:2008 ; Medical electrical equipment – Characteristics of digital X-ray imaging devices — Part 1-3: Determination of the detective quantum efficiency – Detectors used in dynamic imaging
  • EN 62233:2008 ; Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
  • EN 62233:2008/AC:2008 ; EN 62253:2011
  • EN 62253:2011 ; Photovoltaic pumping systems – Design qualification and performance measurements
  • EN 62275:2009 ; Cable management systems – Cable ties for electrical installations
  • EN 62282-3-1:2007 ; Fuel cell technologies — Part 3-1: Stationary fuel cell power systems – Safety
  • EN 62282-3-100:2012 (new) ; Fuel cell technologies — Part 3-100: Stationary fuel cell power systems – Safety
  • EN 62282-3-3:2008 ; Fuel cell technologies — Part 3-3: Stationary fuel cell power systems – Installation
  • EN 62304:2006 ; Medical device software – Software life-cycle processes
  • EN 62304:2006/AC:2008 ; EN 62366:2008
  • EN 62310-1:2005 ; Static transfer systems (STS) — Part 1: General and safety requirements
  • EN 62310-2:2007 ; Static transfer systems (STS) — Part 2: Electromagnetic compatibility (EMC) requirements
  • EN 62311:2008 ; Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300 GHz)
  • EN 62366:2008 ; Medical devices – Application of usability engineering to medical devices
  • EN 62395-1:2006 ; Electrical resistance trace heating systems for industrial and commercial applications — Part 1: General and testing requirements
  • EN 624:2000 ; Specification for dedicated LPG appliances – Room sealed LPG space heating equipment for installation in vehicles and boats
  • EN 62423:2009 ; Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs)
  • EN 62471:2008 ; Photobiological safety of lamps and lamp systems
  • EN 62479:2010 ; Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
  • EN 62493:2010 ; Assessment of lighting equipment related to human exposure to electromagnetic fields
  • EN 625:1995 ; Gas-fired central heating boilers – Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW
  • EN 62532:2011 ; Fluorescent induction lamps – Safety specifications
  • EN 62549:2011 (new) ; Articulated systems and flexible systems for cable guiding
  • EN 626-1:1994+A1:2008 ; Safety of machinery – Reduction of risks to health from hazardous substances emitted by machinery – Part 1: Principles and specifications for machinery manufacturers
  • EN 626-2:1996+A1:2008 ; Safety of machinery – Reduction of risk to health from hazardous substances emitted by machinery – Part 2: Methodology leading to verification procedures
  • EN 656:1999 ; Gas-fired central heating boilers – Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW
  • EN 659:2003+A1:2008 ; Protective gloves for firefighters
  • EN 659:2003+A1:2008/AC:2009 ; EN 702:1994
  • EN 671-1:2001 ; Fixed firefighting systems – Hose systems – Part 1: Hose reels with semi-rigid hose
  • EN 671-1:2001/AC:2002 ; EN 671-2:2001
  • EN 671-2:2001 ; Fixed firefighting systems – Hose systems – Part 2: Hose systems with lay-flat hose
  • EN 671-2:2001/A1:2004 ; EN 681-1:1996
  • EN 676:2003+A2:2008 ; Automatic forced draught burners for gaseous fuels
  • EN 676:2003+A2:2008/AC:2008 ; EN 677:1998
  • EN 676:2003+A2:2008/AC:2008 ; EN 690:1994+A1:2009
  • EN 676:2003+A2:2008/AC:2008 ; EN 764-5:2002
  • EN 677:1998 ; Gas-fired central heating boilers – Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW
  • EN 681-1:1996 ; Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 1: Vulcanized rubber
  • EN 681-1:1996/A1:1998 ; EN 681-1:1996/A2:2002
  • EN 681-1:1996/A2:2002 ; EN 681-1:1996/A3:2005
  • EN 681-1:1996/A3:2005 ; EN 681-2:2000
  • EN 681-2:2000 ; Elastomeric Seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 2: Thermoplastic elastomers
  • EN 681-2:2000/A1:2002 ; EN 681-2:2000/A2:2005
  • EN 681-2:2000/A2:2005 ; EN 681-3:2000
  • EN 681-3:2000 ; Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 3: Cellular materials of vulcanized rubber
  • EN 681-3:2000/A1:2002 ; EN 681-3:2000/A2:2005 (new)
  • EN 681-3:2000/A2:2005 (new) ; EN 681-4:2000
  • EN 681-4:2000 ; Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 4: Cast polyurethane sealing elements
  • EN 681-4:2000/A1:2002 ; EN 681-4:2000/A2:2005 (new)
  • EN 681-4:2000/A2:2005 (new) ; EN 682:2002
  • EN 682:2002 ; Elastomeric Seals – Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
  • EN 682:2002/A1:2005 (new) ; EN 771-1:2011
  • EN 690:1994+A1:2009 ; Agricultural machinery – Manure spreaders – Safety
  • EN 692:2005+A1:2009 ; Machine tools – Mechanical presses – Safety
  • EN 693:2001+A2:2011 ; Machine tools – Safety – Hydraulic presses
  • EN 702:1994 ; Protective clothing – Protection against heat and flame – Test method: Determination of the contact heat transmission through protective clothing or its materials
  • EN 703:2004+A1:2009 ; Agricultural machinery – Silage loading, mixing and/or chopping and distributing machines – Safety
  • EN 706:1996+A1:2009 ; Agricultural machinery – Vine shoot tipping machines – Safety
  • EN 707:1999+A1:2009 ; Agricultural machinery – Slurry tankers – Safety
  • EN 709:1997+A4:2009 ; Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) – Safety
  • EN 710:1997+A1:2010 ; Safety requirements for foundry moulding and coremaking machinery and plant associated equipment
  • EN 710:1997+A1:2010/AC:2012 (new) ; EN 741:2000+A1:2010
  • EN 71-1:2011 ; Safety of toys – Part 1: Mechanical and physical properties
  • EN 71-2:2011 ; Safety of toys – Part 2: Flammability
  • EN 71-8:2011 ; Safety of toys – Part 8: Activity toys for domestic use
  • EN 732:1998 ; Specifications for dedicated liquefied petroleum gas appliances – Absorption refrigerators
  • EN 741:2000+A1:2010 ; Continuous handling equipment and systems – Safety requirements for systems and their components for pneumatic handling of bulk materials
  • EN 746-1:1997+A1:2009 ; Industrial thermoprocessing equipment – Part 1: Common safety requirements for industrial thermoprocessing equipment
  • EN 746-2:2010 ; Industrial thermoprocessing equipment – Part 2: Safety requirements for combustion and fuel handling systems
  • EN 746-3:1997+A1:2009 ; Industrial thermoprocessing equipment – Part 3: Safety requirements for the generation and use of atmosphere gases
  • EN 751-1:1996 ; Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 1: Anaerobic jointing compounds
  • EN 751-2:1996 ; Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 2: Non-hardening jointing compounds
  • EN 751-3:1996 ; Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 3: Unsintered PTFE tapes
  • EN 751-3:1996/AC:1997 ; EN 777-1:2009
  • EN 764-5:2002 ; Pressure Equipment – Part 5: Compliance and Inspection Documentation of Materials
  • EN 764-7:2002 ; Pressure equipment – Part 7: Safety systems for unfired pressure equipment
  • EN 764-7:2002/AC:2006 ; EN 1057:2006+A1:2010
  • EN 771-1:2011 ; Specification for masonry units – Part 1: Clay masonry units
  • EN 771-2:2011 ; Specification for masonry units – Part 2: Calcium silicate masonry units
  • EN 771-3:2011 ; Specification for masonry units – Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
  • EN 771-4:2011 ; Specification for masonry units – Part 4: Autoclaved aerated concrete masonry units
  • EN 771-5:2011 ; Specification for masonry units – Part 5: Manufactured stone masonry units
  • EN 771-6:2011 ; Specification for masonry units – Part 6: Natural stone masonry units
  • EN 777-1:2009 ; Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 1: System D – Safety
  • EN 777-2:2009 ; Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 2: System E – Safety
  • EN 777-3:2009 ; Multi-burner gas-fired overhead radiant tube heater systems for non domestic use – Part 3: System F – Safety
  • EN 777-4:2009 ; Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 4: System H – Safety
  • EN 778:2009 ; Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
  • EN 786:1996+A2:2009 ; Garden equipment – Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers – Mechanical safety
  • EN 791:1995+A1:2009 ; Drill rigs – Safety
  • EN 792-12:2000+A1:2008 ; Hand-held non-electric power tools – Safety requirements – Part 12: Small circular, small oscillating and reciprocating saws
  • EN 792-13:2000+A1:2008 ; Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools
  • EN 794-3:1998+A2:2009 ; Lung ventilators – Part 3: Particular requirements for emergency and transport ventilators
  • EN 795:1996 ; Protection against falls from a height – Anchor devices – Requirements and testing
  • EN 80601-2-35:2009 ; Medical electrical equipment — Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
  • EN 80601-2-58:2009 ; Medical electrical equipment — Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
  • EN 80601-2-59:2009 ; Medical electrical equipment — Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
  • EN 809:1998+A1:2009 ; Pumps and pump units for liquids – Common safety requirements
  • EN 809:1998+A1:2009/AC:2010 ; EN 815:1996+A2:2008
  • EN 81-1:1998+A3:2009 ; Safety rules for the construction and installation of lifts – Part 1: Electric lifts
  • EN 81-2:1998+A3:2009 ; Safety rules for the construction and installation of lifts – Part 2: Hydraulic lifts
  • EN 812:2012 (new) ; Industrial bump caps
  • EN 81-21:2009+A1:2012 (new) ; Safety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 21: New passenger and goods passenger lifts in existing building
  • EN 81-28:2003 ; Safety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 28: Remote alarm on passenger and goods passenger lifts
  • EN 81-3:2000+A1:2008 ; Safety rules for the construction and installation of lifts – Part 3: Electric and hydraulic service lifts
  • EN 81-3:2000+A1:2008/AC:2009 ; EN 81-31:2010
  • EN 813:2008 ; Personal fall protection equipment – Sit harnesses
  • EN 81-31:2010 ; Safety rules for the construction and installation of lifts – Lifts for the transport of goods only – Part 31: Accessible goods only lifts
  • EN 81-40:2008 ; Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
  • EN 81-41:2010 ; Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
  • EN 81-43:2009 ; Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 43: Lifts for cranes
  • EN 815:1996+A2:2008 ; Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock – Safety requirements
  • EN 81-58:2003 ; Safety rules for the construction and installation of lifts – Examination and tests – Part 58: Landing doors fire resistance test
  • EN 81-70:2003 ; Safety rules for the construction and installations of lifts – Particular applications for passenger and good passengers lifts – Part 70: Accessibility to lifts for persons including persons with disability
  • EN 81-70:2003/A1:2004 ; EN 81-71:2005+A1:2006
  • EN 81-71:2005+A1:2006 ; Safety rules for the construction and installation of lifts – Particular applications to passenger lifts and goods passenger lifts – Part 71: Vandal resistant lifts
  • EN 81-72:2003 ; Safety rules for the construction and installation of lifts – Particular applications for passenger and goods passenger lifts – Part 72: Firefighters lifts
  • EN 81-73:2005 ; Safety rules for the construction and installation of lifts – Particular applications for passenger and goods passenger lifts – Part 73: Behaviour of lifts in the event of fire
  • EN 818-1:1996+A1:2008 ; Short link chain for lifting purposes – Safety – Part 1: General conditions of acceptance
  • EN 818-2:1996+A1:2008 ; Short link chain for lifting purposes – Safety – Part 2: Medium tolerance chain for chain slings – Grade 8
  • EN 818-3:1999+A1:2008 ; Short link chain for lifting purposes – Safety – Part 3: Medium tolerance chain for chain slings – Grade 4
  • EN 818-4:1996+A1:2008 ; Short link chain for lifting purposes – Safety – Part 4: Chain slings – Grade 8
  • EN 818-5:1999+A1:2008 ; Short link chain for lifting purposes – Safety – Part 5: Chain slings – Grade 4
  • EN 818-6:2000+A1:2008 ; Short link chain for lifting purposes – Safety – Part 6: Chain slings – Specification for information for use and maintenance to be provided by the manufacturer
  • EN 818-7:2002+A1:2008 ; Short link chain for lifting purposes – Safety – Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
  • EN 836:1997+A4:2011 ; Garden equipment – Powered lawnmowers – Safety
  • EN 842:1996+A1:2008 ; Safety of machinery – Visual danger signals – General requirements, design and testing
  • EN 845-1:2003+A1:2008 ; Specification for ancillary components for masonry – Part 1: Ties, tension straps, hangers and brackets
  • EN 845-2:2003 ; Specification for ancillary components for masonry – Part 2: Lintels
  • EN 845-3:2003+A1:2008 ; Specification for ancillary components for masonry – Part 3: Bed joint reinforcement of steel meshwork
  • EN 848-1:2007+A2:2012 (new) ; Safety of woodworking machines – One side moulding machines with rotating tool – Part 1: Single spindle vertical moulding machines
  • EN 848-2:2007+A2:2012 (new) ; Safety of woodworking machines – One side moulding machines with rotating tool – Part 2: Single spindle hand fed/integrated fed routing machines
  • EN 848-3:2007+A2:2009 ; Safety of woodworking machines – One side moulding machines with rotating tools – Part 3: Numerically controlled (NC) boring and routing machines
  • EN 858-1:2002 ; Separator systems for light liquids (e.g. oil and petrol) – Part 1: Principles of product design, performance and testing, marking and quality control
  • EN 858-1:2002/A1:2004 ; EN 877:1999
  • EN 859:2007+A2:2012 ; Safety of woodworking machines – Hand fed surface planing machines
  • EN 860:2007+A2:2012 ; Safety of woodworking machines – One side thickness planing machines
  • EN 861:2007+A2:2012 ; Safety of woodworking machines – Surface planing and thicknessing machines
  • EN 863:1995 ; Protective clothing – Mechanical properties – Test method: Puncture resistance
  • EN 869:2006+A1:2009 ; Safety of machinery – Safety requirements for pressure metal diecasting units
  • EN 877:1999 ; Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
  • EN 877:1999/A1:2006 ; EN 877:1999/A1:2006/AC:2008
  • EN 877:1999/A1:2006/AC:2008 ; EN 934-2:2009
  • EN 88-1:2007 ; Pressure regulators and associated safety devices for gas appliances – Part 1: Pressure regulators for inlet pressures up to and including 500 mbar
  • EN 88-2:2007 ; Pressure regulators and associated safety devices for gas appliances – Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
  • EN 89:1999 ; Gas-fired storage water heaters for the production of domestic hot water
  • EN 892:2012 (new) ; Mountaineering equipment – Dynamic mountaineering ropes – Safety requirements and test methods
  • EN 893:2010 ; Mountaineering equipment – Crampons – Safety requirements and test methods
  • EN 894-1:1997+A1:2008 ; Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 1: General principles for human interactions with displays and control actuators
  • EN 894-2:1997+A1:2008 ; Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 2: Displays
  • EN 894-3:2000+A1:2008 ; Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 3: Control actuators
  • EN 894-4:2010 ; Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 4: Location and arrangement of displays and control actuators
  • EN 908:1999+A1:2009 ; Agricultural and forestry machinery – Reel machines for irrigation – Safety
  • EN 909:1998+A1:2009 ; Agricultural and forestry machinery – Centre pivot and moving lateral types irrigation machines – Safety
  • EN 913:1996 ; Gymnastic equipment – General safety requirements and test methods
  • EN 916:2003 ; Gymnastic equipment – Vaulting boxes – Requirements and test methods including safety
  • EN 930:1997+A2:2009 ; Footwear, leather and imitation leather goods manufacturing machines – Roughing, scouring, polishing and trimming machines – Safety requirements
  • EN 931:1997+A2:2009 ; Footwear manufacturing machines – Lasting machines – Safety requirements
  • EN 934-2:2009 ; Admixtures for concrete, mortar and grout – Part 2: Concrete admixtures – Definitions, requirements, conformity, marking and labelling
  • EN 934-3:2009 ; Admixtures for concrete, mortar and grout – Part 3: Admixtures for masonry mortar – Definitions, requirements, conformity and marking and labelling
  • EN 934-4:2009 ; Admixtures for concrete, mortar and grout – Part 4: Admixtures for grout for prestressing tendons – Definitions, requirements, conformity, marking and labelling
  • EN 934-5:2007 ; Admixtures for concrete, mortar and grout – Part 5: Admixtures for sprayed concrete – Definitions, requirements, conformity, marking and labelling
  • EN 940:2009+A1:2012 ; Safety of woodworking machines – Combined woodworking machines
  • EN 943-1:2002 ; Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles – Part 1: Performance requirements for ventilated and non-ventilated “gas-tight” (Type 1) and “non-gas-tight” (Type 2) chemical protective suits
  • EN 943-1:2002/AC:2005 ; EN 943-2:2002
  • EN 943-2:2002 ; Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles – Part 2: Performance requirements for “gas-tight” (Type 1) chemical protective suits for emergency teams (ET)
  • EN 953:1997+A1:2009 ; Safety of machinery – Guards – General requirements for the design and construction of fixed and movable guards
  • EN 957-1:2005 ; Stationary training equipment – Part 1: General safety requirements and test methods
  • EN 957-10:2005 ; Stationary training equipment – Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods
  • EN 957-2:2003 ; Stationary training equipment – Part 2: Strength training equipment, additional specific safety requirements and test methods
  • EN 957-4:1996 ; Stationary training equipment – Part 4: Strength training benches, additional specific safety requirements and test methods
  • EN 957-5:1996 ; Stationary training equipment – Part 5: Pedal crank training equipment, additional specific safety requirements and test methods
  • EN 957-6:2001 ; Stationary training equipment – Part 6: Treadmills, additional specific safety requirements and test methods
  • EN 957-7:1998 ; Stationary training equipment – Part 7: Rowing machines, additional specific safety requirements and test methods
  • EN 957-8:1998 ; Stationary training equipment – Part 8: Steppers, stairclimbers and climbers – Additional specific safety requirements and test methods
  • EN 957-9:2003 ; Stationary training equipment – Part 9: Elliptical trainers, additional specific safety requirements and test methods
  • EN 958:2006+A1:2010 ; Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods
  • EN 960:2006 ; Headforms for use in the testing of protective helmets
  • EN 966:2012+A1:2012 (new) ; Helmets for airborne sports
  • EN 969:2009 ; Ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods
  • EN 972:1998+A1:2010 ; Tannery machines – Reciprocating roller machines – Safety requirements
  • EN 972:1998+A1:2010/AC:2011 ; EN 981:1996+A1:2008
  • EN 981:1996+A1:2008 ; Safety of machinery – System of auditory and visual danger and information signals
  • EN 996:1995+A3:2009 ; Piling equipment – Safety requirements
  • EN 997:2012 (new) ; WC pans and WC suites with integral trap
  • EN 998-1:2010 ; Specification for mortar for masonry – Part 1: Rendering and plastering mortar
  • EN 998-2:2010 ; Specification for mortar for masonry – Part 2: Masonry mortar
  • EN ISO 10079-1:2009 ; Medical suction equipment – Part 1: Electrically powered suction equipment – Safety requirements (ISO 10079-1:1999)
  • EN ISO 10079-2:2009 ; Medical suction equipment – Part 2: Manually powered suction equipment (ISO 10079-2:1999)
  • EN ISO 10079-3:2009 ; Medical suction equipment – Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999)
  • EN ISO 10087:2006 ; Small craft – Craft identification – Coding system (ISO 10087:2006)
  • EN ISO 10088:2009 ; Small craft – Permanently installed fuel systems (ISO 10088:2009)
  • EN ISO 10133:2000 ; Small craft – Electrical systems – Extra-low-voltage d.c. installations (ISO 10133:2000)
  • EN ISO 10218-1:2011 ; Robots and robotic devices – Safety requirements for industrial robots – Part 1: Robots (ISO 10218-1:2011)
  • EN ISO 10218-2:2011 ; Robots and robotic devices – Safety requirements for industrial robots – Part 2: Robot systems and integration (ISO 10218-2:2011)
  • EN ISO 10239:2008 ; Small craft – Liquefied petroleum gas (LPG) systems (ISO 10239:2008)
  • EN ISO 10240:2004 ; Small craft – Owner’s manual (ISO 10240:2004)
  • EN ISO 10256:2003 ; Head and face protection for use in ice hockey (ISO 10256:2003)
  • EN ISO 10328:2006 ; Prosthetics – Structural testing of lower-limb prostheses – Requirements and test methods (ISO 10328:2006)
  • EN ISO 10472-1:2008 ; Safety requirements for industrial laundry machinery – Part 1: Common requirements (ISO 10472-1:1997)
  • EN ISO 10472-2:2008 ; Safety requirements for industrial laundry machinery – Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)
  • EN ISO 10472-3:2008 ; Safety requirements for industrial laundry machinery – Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)
  • EN ISO 10472-4:2008 ; Safety requirements for industrial laundry machinery – Part 4: Air dryers (ISO 10472-4:1997)
  • EN ISO 10472-5:2008 ; Safety requirements for industrial laundry machinery – Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)
  • EN ISO 10472-6:2008 ; Safety requirements for industrial laundry machinery – Part 6: Ironing and fusing presses (ISO 10472-6:1997)
  • EN ISO 10517:2009 ; Powered hand-held hedge trimmers – Safety (ISO 10517:2009)
  • EN ISO 10524-1:2006 ; Pressure regulators for use with medical gases – Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006)
  • EN ISO 10524-2:2006 ; Pressure regulators for use with medical gases – Part 2: Manifold and line pressure regulators (ISO 10524-2:2005)
  • EN ISO 10524-3:2006 ; Pressure regulators for use with medical gases – Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005)
  • EN ISO 10524-4:2008 ; Pressure regulators for use with medical gases – Part 4: Low-pressure regulators (ISO 10524-4:2008)
  • EN ISO 10535:2006 ; Hoists for the transfer of disabled persons – Requirements and test methods (ISO 10535:2006)
  • EN ISO 10555-1:2009 ; Sterile, single-use intravascular catheters – Part 1: General requirements (ISO 10555-1:1995, including Amd 1:1999 and Amd 2:2004)
  • EN ISO 10592:1995 ; Small craft – Hydraulic steering systems (ISO 10592:1994)
  • EN ISO 10651-2:2009 ; Lung ventilators for medical use – Particular requirements for basic safety and essential performance – Part 2: Home care ventilators for ventilator-dependent patients (ISO 10651-2:2004)
  • EN ISO 10651-4:2009 ; Lung ventilators – Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002)
  • EN ISO 10651-6:2009 ; Lung ventilators for medical use – Particular requirements for basic safety and essential performance – Part 6: Home-care ventilatory support devices (ISO 10651-6:2004)
  • EN ISO 10819:1996 ; Mechanical vibration and shock – Hand-arm vibration – Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:1996)
  • EN ISO 10821:2005 ; Industrial sewing machines – Safety requirements for sewing machines, units and systems (ISO 10821:2005)
  • EN ISO 10862:2009 ; Small craft – Quick release system for trapeze harness (ISO 10862:2009)
  • EN ISO 10931:2005 ; Plastics piping systems for industrial applications – Poly(vinylidene fluoride) (PVDF) – Specifications for components and the system (ISO 10931:2005)
  • EN ISO 10993-1:2009 ; Biological evaluation of medical devices – Part 1: Evaluation and testing within a risk management process (ISO 10993-1:2009)
  • EN ISO 10993-1:2009/AC:2010 ; EN ISO 10993-3:2009
  • EN ISO 10993-1:2009/AC:2010 ; EN ISO 10993-4:2009
  • EN ISO 10993-11:2009 ; Biological evaluation of medical devices – Part 11: Tests for systemic toxicity (ISO 10993-11:2006)
  • EN ISO 10993-12:2012 (new) ; Biological evaluation of medical devices – Part 12: Sample preparation and reference materials (ISO 10993-12:2012)
  • EN ISO 10993-13:2010 ; Biological evaluation of medical devices – Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:2010)
  • EN ISO 10993-14:2009 ; Biological evaluation of medical devices – Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001)
  • EN ISO 10993-15:2009 ; Biological evaluation of medical devices – Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000)
  • EN ISO 10993-16:2010 ; Biological evaluation of medical devices – Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:2010)
  • EN ISO 10993-17:2009 ; Biological evaluation of medical devices – Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002)
  • EN ISO 10993-18:2009 ; Biological evaluation of medical devices – Part 18: Chemical characterization of materials (ISO 10993-18:2005)
  • EN ISO 10993-3:2009 ; Biological evaluation of medical devices – Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2003)
  • EN ISO 10993-4:2009 ; Biological evaluation of medical devices – Part 4: Selection of tests for interactions with blood (ISO 10993-4:2002, including Amd 1:2006)
  • EN ISO 10993-5:2009 ; Biological evaluation of medical devices – Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009)
  • EN ISO 10993-6:2009 ; Biological evaluation of medical devices – Part 6: Tests for local effects after implantation (ISO 10993-6:2007)
  • EN ISO 10993-7:2008 ; Biological evaluation of medical devices – Part 7: Ethylene oxide sterilization residuals (ISO 10993-7:2008)
  • EN ISO 10993-7:2008/AC:2009 ; EN ISO 10993-9:2009
  • EN ISO 10993-9:2009 ; Biological evaluation of medical devices – Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009)
  • EN ISO 11102-1:2009 ; Reciprocating internal combustion engines – Handle starting equipment – Part 1: Safety requirements and tests (ISO 11102-1:1997)
  • EN ISO 11102-2:2009 ; Reciprocating internal combustion engines – Handle starting equipment – Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)
  • EN ISO 11105:1997 ; Small craft – Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997)
  • EN ISO 11111-1:2009 ; Textile machinery – Safety requirements – Part 1: Common requirements (ISO 11111-1:2009)
  • EN ISO 11111-2:2005 ; Textile machinery – Safety requirements – Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)
  • EN ISO 11111-3:2005 ; Textile machinery – Safety requirements – Part 3: Nonwoven machinery (ISO 11111-3:2005)
  • EN ISO 11111-4:2005 ; Textile machinery – Safety requirements – Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)
  • EN ISO 11111-5:2005 ; Textile machinery – Safety requirements – Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)
  • EN ISO 11111-6:2005 ; Textile machinery – Safety requirements – Part 6: Fabric manufacturing machinery (ISO 11111-6:2005)
  • EN ISO 11111-7:2005 ; Textile machinery – Safety requirements – Part 7: Dyeing and finishing machinery (ISO 11111-7:2005)
  • EN ISO 11135-1:2007 ; Sterilization of health care products – Ethylene oxide – Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007)
  • EN ISO 11137-1:2006 ; Sterilization of health care products – Radiation – Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006)
  • EN ISO 11137-2:2012 ; Sterilization of health care products – Radiation – Part 2: Establishing the sterilization dose (ISO 11137-2:2012)
  • EN ISO 11137-2:2012 (new) ; Sterilization of health care products – Radiation – Part 2: Establishing the sterilization dose (ISO 11137-2:2012)
  • EN ISO 11138-2:2009 ; Sterilization of health care products – Biological indicators – Part 2: Biological indicators for ethylene oxide sterilization processes (ISO 11138-2:2006)
  • EN ISO 11138-3:2009 ; Sterilization of health care products – Biological indicators – Part 3: Biological indicators for moist heat sterilization processes (ISO 11138-3:2006)
  • EN ISO 11140-1:2009 ; Sterilization of health care products – Chemical indicators – Part 1: General requirements (ISO 11140-1:2005)
  • EN ISO 11140-3:2009 ; Sterilization of health care products – Chemical indicators – Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007, including Cor 1:2007)
  • EN ISO 11145:2008 ; Optics and photonics – Lasers and laser-related equipment – Vocabulary and symbols (ISO 11145:2006)
  • EN ISO 11148-1:2011 ; Hand-held non-electric power tools – Safety requirements – Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
  • EN ISO 11148-10:2011 ; Hand-held non-electric power tools – Safety requirements – Part 10: Compression power tools (ISO 11148-10:2011)
  • EN ISO 11148-11:2011 ; Hand-held non-electric power tools – Safety requirements – Part 11: Nibblers and shears (ISO 11148-11:2011)
  • EN ISO 11148-2:2011 ; Hand-held non-electric power tools – Safety requirements – Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)
  • EN ISO 11148-3:2010 ; Hand-held non-electric power tools – Safety requirements – Part 3: Drills and tappers (ISO 11148-3:2010)
  • EN ISO 11148-4:2010 ; Hand-held non-electric power tools – Safety requirements – Part 4: Non­rotary percussive power tools (ISO 11148-4:2010)
  • EN ISO 11148-5:2011 ; Hand-held non-electric power tools – Safety requirements – Part 5: Rotary percussive drills (ISO 11148-5:2011)
  • EN ISO 11148-6:2010 ; Hand-held non-electric power tools – Safety requirements – Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010)
  • EN ISO 11148-7:2012 (new) ; Hand-held non-electric power tools – Safety requirements – Part 7: Grinders (ISO 11148-7:2012)
  • EN ISO 11148-8:2011 ; Hand-held non-electric power tools – Safety requirements – Part 8: Sanders and polishers (ISO 11148-8:2011)
  • EN ISO 11148-9:2011 ; Hand-held non-electric power tools – Safety requirements – Part 9: Die grinders (ISO 11148-9:2011)
  • EN ISO 11161:2007 ; Safety of machinery – Integrated manufacturing systems – Basic requirements (ISO 11161:2007)
  • EN ISO 11192:2005 ; Small craft – Graphical symbols (ISO 11192:2005)
  • EN ISO 11197:2009 ; Medical supply units (ISO 11197:2004)
  • EN ISO 11200:2009 ; Acoustics – Noise emitted by machinery and equipment – Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997)
  • EN ISO 11201:2010 ; Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
  • EN ISO 11202:2010 ; Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
  • EN ISO 11203:2009 ; Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
  • EN ISO 11204:2010 ; Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
  • EN ISO 11205:2009 ; Acoustics – Noise emitted by machinery and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
  • EN ISO 11252:2008 ; Lasers and laser-related equipment – Laser device – Minimum requirements for documentation (ISO 11252:2004)
  • EN ISO 11546-1:2009 ; Acoustics – Determination of sound insulation performances of enclosures – Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
  • EN ISO 11546-2:2009 ; Acoustics – Determination of sound insulation performances of enclosures – Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
  • EN ISO 11547:1995 ; Small craft – Start-in-gear protection (ISO 11547:1994)
  • EN ISO 11553-1:2008 ; Safety of machinery – Laser processing machines – Part 1: General safety requirements (ISO 11553-1:2005)
  • EN ISO 11553-2:2008 ; Safety of machinery – Laser processing machines – Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)
  • EN ISO 11554:2008 ; Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)
  • EN ISO 11591:2011 ; Small craft, engine-driven – Field of vision from helm position (ISO 11591:2011)
  • EN ISO 11592:2001 ; Small craft less than 8 m length of hull – Determination of maximum propulsion power rating (ISO 11592:2001)
  • EN ISO 11607-1:2009 ; Packaging for terminally sterilized medical devices – Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006)
  • EN ISO 11607-2:2006 ; Packaging for terminally sterilized medical devices – Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006)
  • EN ISO 11611:2007 ; Protective clothing for use in welding and allied processes (ISO 11611:2007)
  • EN ISO 11612:2008 ; Protective clothing – Clothing to protect against heat and flame (ISO 11612:2008)
  • EN ISO 11680-1:2011 ; Machinery for forestry – Safety requirements and testing for pole-mounted powered pruners – Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)
  • EN ISO 11680-2:2011 ; Machinery for forestry – Safety requirements and testing for pole-mounted powered pruners – Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)
  • EN ISO 11681-1:2011 ; Machinery for forestry – Portable chain-saw safety requirements and testing – Part 1: Chain-saws for forest service (ISO 11681-1:2011)
  • |1||2||3| -|4|-