10. Steel Plate, Sheet and Strips
10. Steel Plate, Sheet and Strips
10-1) ASTM A1008 / A1008M – 10 ; Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
10-2) ASTM A109 / A109M – 08 ; Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
10-3) ASTM A123 / A123M – 09 ; Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
10-4) ASTM A167 – 99(2009) ; Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
10-5) ASTM A176 – 99(2009) ; Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
10-6) ASTM A240 / A240M – 10 ; Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for
10-7) ASTM A263 – 09 ; Standard Specification for Stainless Chromium Steel-Clad Plate
10-8) ASTM A264 – 09 ; Specification for Stainless Chromium-Nickel Steel-Clad Plate
10-9) ASTM A285 / A285M – 03(2007) ; Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
10-10) ASTM A328 / A328M – 07 ; Standard Specification for Steel Sheet Piling
10-11) ASTM A414 / A414M – 10 ; Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
10-12) ASTM A424 / A424M – 09a ; Standard Specification for Steel, Sheet, for Porcelain Enameling
10-13) ASTM A463 / A463M – 09a ; Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
10-14) ASTM A480 / A480M – 10 ; Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
10-15) ASTM A505 – 00(2005) ; Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
10-16) ASTM A506 – 05 ; Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
10-17) ASTM A507 – 10 ; Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
10-18) ASTM A568 / A568M – 09a ; Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
10-19) ASTM A577 / A577M – 90(2007) ; Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
10-20) ASTM A578 / A578M – 07 ; Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
10-21) ASTM A599 / A599M – 07 ; Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
10-22) ASTM A606 / A606M – 09a ; Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
10-23) ASTM A635 / A635M – 09b ; Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
10-24) ASTM A653 / A653M – 09a ; Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
10-25) ASTM A653 / A653M – 09a ; Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
10-26) ASTM A653 / A653M – 09a ; Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
10-27) ASTM A666 – 03 ; Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
10-28) ASTM A690 / A690M – 07 ; Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
10-29) ASTM A775 / A775M – 07b ; Standard Specification for Epoxy-Coated Steel Reinforcing Bars
10-30) ASTM A792 / A792M – 09a ; Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
10-31) ASTM A857 / A857M – 07 ; Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
10-32) ASTM A875 / A875M – 09a ; Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
10-33) ASTM A879 / A879M – 06 ; Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
10-34) ASTM A929 / A929M – 01(2007) ; Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
10-35) BDS 1122 : 1985 ; Specification for Hot-dip Galvanized Steel Sheet and Coil;
10-36) BDS 868 : 1978 ; Code of Practice for Galvanized Corrugated Sheet Roof and Wall Coverings;
10-37) BDS ISO 16160:2011 ; Continuously hot-rolled steel sheet products — Dimensional and shape tolerances
10-38) BDS ISO 16163:2011 ; Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
10-39) BDS ISO 4995:2006 ; Hot-rolled steel sheet of structural quality
10-40) BDS ISO 7452:2008 ; Hot-rolled structural steel plates — Tolerances on dimensions and shape
10-41) BDS ISO 7778:2008 ; Steel plate with specified through-thickness characteristics
10-42) BDS ISO 7788:2008 ; Steel – Surface finish of hot-rolled plates and wide flats – Delivery requirements
10-43) BDS ISO 9034:2008 ; Hot-rolled structural steel wide flats – Tolerances on dimensions and shape
10-44) BDS ISO 9328-1:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
10-45) BDS ISO 9328-2:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
10-46) BDS ISO 9328-3:2009 ; Steel flat products for pressure purposes — Technical delivery conditions —Part 3: Weldable fine grain steels, normalized
10-47) BDS ISO 9328-4:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
10-48) BDS ISO 9328-5:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermo mechanically rolled
10-49) BDS ISO 9328-6:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
10-50) BDS ISO 9328-7:2009 ; Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
10-51) BDS ISO 9364:2011 ; Continuous hot-dip aluminium/zinc coated steel sheet of commercial, drawing and structural qualities
10-52) BDS ISO16162:2011 ; Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
10-53) IS 1079 : 1994 ; Specification for hot rolled carbon steel sheet and strip (fifth revision)
10-54) IS 3502 : 1994 ; Specification for steel chequered plates (second revision)
10-55) IS 4030 : 1973 ; Specification for Cold-Rolled Carbon Steel Strip for General Engineering Purposes (First Revision);
10-56) IS 412 : 1975 ; Specification for Expanded Metal Steel Sheets for General Purposes (Second Revision);
10-57) IS 7226 : 1974 ; Specification for Cold-Rolled Medium, High Carbon and Low-Alloy Steel Strip for General Engineering Purposes;
Comments are closed.