21. SANITARY APPLIANCES AND WATER FITTINGS

건설자재 시험 및 인증 관련 규격목록 21

21. SANITARY APPLIANCES AND WATER FITTINGS

21-1)        ASTM A377 – 03(2008)e1 ; Standard Index of Specifications for Ductile-Iron Pressure Pipe

21-2)        ASTM A53 / A53M – 07 ; Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

21-3)        ASTM A74 – 09 ; Standard Specification for Cast Iron Soil Pipe and Fittings

21-4)        ASTM B209 – 07 ; Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

21-5)        ASTM B251 – 02e1 ; Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

21-6)        ASTM B302 – 07 ; Standard Specification for Threadless Copper Pipe, Standard Sizes

21-7)        ASTM B306 – 09 ; Standard Specification for Copper Drainage Tube (DWV)

21-8)        ASTM B42 – 02e1 ; Standard Specification for Seamless Copper Pipe, Standard Sizes

21-9)        ASTM B42 – 02e1 ; Standard Specification for Seamless Copper Pipe, Standard Sizes

21-10)      ASTM B429 / B429M – 06 ; Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

21-11)      ASTM B43 – 09 ; Standard Specification for Seamless Red Brass Pipe, Standard Sizes

21-12)      ASTM B447 – 07 ; Standard Specification for Welded Copper Tube

21-13)      ASTM B745 / B745M – 97(2005) ; Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

21-14)      ASTM B75 – 02 ; Standard Specification for Seamless Copper Tube

21-15)      ASTM B88 – 09 ; Standard Specification for Seamless Copper Water Tube

21-16)      ASTM C14 – 07 ; Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe

21-17)      ASTM C425 – 04(2009) ; Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

21-18)      ASTM C443 – 05ae1 ; Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

21-19)      ASTM C508 / C508M – 00(2009)e1 ; Standard Specification for Asbestos-Cement Underdrain Pipe

21-20)      ASTM C564 – 09a ; Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

21-21)      ASTM C654 – 05a ; Standard Specification for Porous Concrete Pipe

21-22)      ASTM C700 – 09 ; Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated

21-23)      ASTM C76 – 10a ; Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

21-24)      ASTM D1527 – 99(2005) ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80

21-25)      ASTM D1785 – 06 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

21-26)      ASTM D1869 – 95(2005)e1 ; Standard Specification for Rubber Rings for Asbestos-Cement Pipe

21-27)      ASTM D2235 – 04 ; Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

21-28)      ASTM D2239 – 03 ; Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

21-29)      ASTM D2241 – 09 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

21-30)      ASTM D2321 – 09 ; Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications ASTM D2464 – 06 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

21-31)      ASTM D2466 – 06 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40ASTM D2467 – 06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

21-32)      ASTM D2564 – 04(2009)e1 ; Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems

21-33)      ASTM D2609 – 02(2008) ; Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

21-34)      ASTM D2657 – 07 ; Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings

21-35)      ASTM D2661 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

21-36)      ASTM D2661 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

21-37)      ASTM D2665 – 09 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

21-38)      ASTM D2672 – 96a(2009) ; Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement

21-39)      ASTM D2729 – 03 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

21-40)      ASTM D2737 – 03 ; Standard Specification for Polyethylene (PE) Plastic Tubing

21-41)      ASTM D2751 – 05 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings

21-42)      ASTM D2846 / D2846M – 09b ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

21-43)      ASTM D2846 / D2846M – 09b ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

21-44)      ASTM D2855 – 96(2010) ; Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings

21-45)      ASTM D2949 – 01a(2008)e1 ; Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

21-46)      ASTM D3034 – 08 ; Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

21-47)      ASTM D3139 – 98(2005) ; Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

21-48)      ASTM D3212 – 07 ; Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

21-49)      ASTM F402 – 05 ; Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

21-50)      ASTM F405 – 05 ; Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings

21-51)      ASTM F409 – 02(2008) ; Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

21-52)      ASTM F437 – 09 ; Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

21-53)      ASTM F438 – 09 ; Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

21-54)      ASTM F441 / F441M – 09 ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

21-55)      ASTM F442 / F442M – 09 ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)

21-56)      ASTM F493 – 04 ; Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

21-57)      ASTM F628 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

21-58)      ASTM F628 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

21-59)      ASTM F656 – 08 ; Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

21-60)      ASTM F891 – 09 ; Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

21-61)      BDS 1111:1984 ; Centrifugally Cast (spun) Iron Pressure Pipes for Water, Gas and Sewage;

21-62)      BDS 1162 : 2006 (1st revision) ; Ceramic wash basin and pedestal, ceramic wash basin and pedestals dimension, design & construction, type, permissible deviation

21-63)      BDS 1163 : 1987 ; Specification for Vitreous Sanitary Appliances,

21-64)      BDS 1356:1992 ; Specification for Ferrules for Water Services;

21-65)      BDS 1357: 1992 ; Specification for Washers with Fittings for Water Service;

21-66)      BDS 1361 : 1992 ; Faucets

21-67)      BDS 1361:1992 ; Faucets

21-68)      BDS 1507 : 1995 ; Bib taps used in water supply

21-69)      BDS 1508 : 1995 ; Stop taps used in water supply.Specifies the requirements, dimensions construction, materials and test methods of stop taps used in water supply.

21-70)      BDS 1508:1995 ; Stop taps used in water supply.

21-71)      BDS 1509:1995 ; Pillar taps used in water supply

21-72)      BDS 1562:1997 ; Solvent cements for polyvinyl chloride (PVC) plastic pipe and fitting.

21-73)      BDS 1593 : 1998 ; Plastic sanitary squatting pan

21-74)      BDS 1593:1998 ; Plastic sanitary squatting pan

21-75)      BDS 428:1964 ; Specification for Asbestos Cement Pressure Pipe;

21-76)      BDS 429:1964 ; Specification for Asbestos Cement Building and Sanitary Pipes (under revision);

21-77)      BDS 987 : 1981 ; Sand cast brass screw‐down bib taps and stop taps for water services.

21-78)      BDS EN 1112: 2009 ; Sanitary tapware ‐ Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 – General technical specification

21-79)      BDS EN 1113: 2009 ; Sanitary tapware – Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 – General technical specification

21-80)      BDS EN 1254‐2: 2009 ; Copper and copper alloys ‐ Plumbing fittings – Part 2: Fittings with compression ends for use with copper tubes

21-81)      BDS EN 14506: 2009 ; Devices to prevent pollution by backflow of potable water – Automatic diverter – Family H, type C

21-82)      BDS EN 1717: 2009 ; Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow

21-83)      BDS EN 200: 2009 ; Sanitary tapware — Single taps and combination taps for water supply systems of type 1 and type 2 — General technical specification

21-84)      BDS EN 246: 2009 ; Sanitary tapware – General specifications for flow rate regulators

21-85)      BDS EN 248: 2009 ; Sanitary tapware – General specification for electrodeposited coatings of Ni‐Cr

21-86)      BDS EN 681-1: 2008 ; Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber

21-87)      BDS EN 681-2 : 2008 ; Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers

21-88)      BDS ISO /TR 4191: 2008 ; Unplasticized polyvinyl chloride (PVC-U) pipes for water supply-Recommended practice for laying

21-89)      BDS ISO 11413:2010 ; Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting BDS ISO 11414, Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

21-90)      BDS ISO 1167-1 : 2008 ; Thermoplastics pipes fittings and assemblies for the conveyance of fluids – Determination of the resistance to internal pressure- Part 1: General method

21-91)      BDS ISO 1167-2 : 2008 ; Thermoplastics pipes fittings and assemblies for the conveyance of fluids- Determination of the resistance to internal pressure-

21-92)      BDS ISO 12176-2:2010 ; Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion

21-93)      BDS ISO 12176-3:2010 ; Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator’s badge

21-94)      BDS ISO 12176-4:2010 ; Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding

21-95)      BDS ISO 13479:2010 ; Polyolefin pipes for the conveyance of fluids — Determination of

21-96)      BDS ISO 13761:2010 ; Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 °C

21-97)      BDS ISO 13951:2010 ; Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading

21-98)      BDS ISO 13953:2010 ; Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

21-99)      BDS ISO 13954:2010 ; Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

21-100)    BDS ISO 13955:2010 ; Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies

21-101)    BDS ISO 13957:2010 ; Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance

21-102)    BDS ISO 14236:2010 ; Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems

21-103)    BDS ISO 161-1 : 2008 ; Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and Nominal Pressures- Part 1: Metric series

21-104)    BDS ISO 161-2 : 2008 ; Thermoplastics pipes for the conveyance of fluids- Nominal outside diameters and Nominal Pressures- Part 2: Inch – based series

21-105)    BDS ISO 1746 : 2008 ; Rubber or Plastics hoses and tubing-Bending tests

21-106)    BDS ISO 18553:2010 ; Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

21-107)    BDS ISO 18553:2010 ; Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds Amendment 1:2010

21-108)    BDS ISO 2505 : 2008 ; Thermoplastics pipes- Longitudinal reversion – Test method and parameters

21-109)    BDS ISO 2507-2 : 2008 ; Thermoplastics pipes and fittings – Vicat softening temperature- Part 2: Test conditions for Unplasticized poly (Vinyl chloride) (PVC-U) or chlorinated poly (Vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (Vinyl chloride) (PVC-HI) pipes

21-110)     BDS ISO 265-1 : 2008 ; Pipes and fittings of plastics materials- fittings for domestic and industrial waste pipes- Basic dimensions: Metric series- Part 1: Unplasticized Poly (Vinyl chloride) (PVC-U)

21-111)     BDS ISO 3114: 2008 ; Unplasticized polyvinyl chloride (PVC) pipes for potable water supply-Extractability of lead and tin- Test method

21-112)     BDS ISO 3126 : 2008 ; Plastics piping systems-Plastics components- Determination of dimensions

21-113)     BDS ISO 3127: 2008 ; Thermoplastics pipes- Determination of resistance to external blows-Round – the – clock method

21-114)     BDS ISO 3419: 2008 ; Non – alloy and alloy steel butt–welding fittings

21-115)     BDS ISO 3458:2010 ; Assembled joints between fittings and polyethylene (PE)

21-116)     BDS ISO 3459:2010 ; Polyethylene (PE) pressure pipes — Joints assembled with mechanical fittings — Internal under pressure test method and requirement

21-117)     BDS ISO 3501:2010 ; Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of resistance to pull-out

21-118)     BDS ISO 3503:2010 ; Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure when subjected to bending

21-119)     BDS ISO 3633: 2008 ; Plastics piping systems for soil and waste discharge (Low and high temperature ) inside buildings- Specifications

21-120)    BDS ISO 3822-‐1: 2009 ; Acoustics: Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 1: Method of measurement

21-121)    BDS ISO 3822-‐2: 2009 ; Acoustics: Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 2: Mounting and operating conditions for draw‐off taps and mixing valves

21-122)    BDS ISO 3822-‐4: 2009 ; Acoustics: Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 4: Mounting and operating conditions for special appliances

21-123)    BDS ISO 4065: 2008 ; Thermoplastics pipes- Universal wall thickness table

21-124)    BDS ISO 4422-1: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply – Specifications – Part 1: General

21-125)    BDS ISO 4422-2: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply – Specifications – Part 2: Pipes (with or without integral sockets)

21-126)    BDS ISO 4422-3: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride)(PVC-U) for water supply- Specifications – Part 3: Fittings and joints

21-127)    BDS ISO 4422-4: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply- Specifications- Part 4: Valves and ancillary equipment

21-128)    BDS ISO 4422-5: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC- U) for water supply- Specifications- Part 5: Fitness for purpose of the system

21-129)    BDS ISO 4427-1:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General

21-130)    BDS ISO 4427-1:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General Technical corrigendum 1: 2010

21-131)    BDS ISO 4427-2:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes

21-132)    BDS ISO 4427-3:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings

21-133)    BDS ISO 4427-5:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system

21-134)    BDS ISO 4433-3: 2008 ; Thermoplastics pipes- Resistance to liquid chemicals- Classification-Part 3: Unplasticized poly (vinyl chloride) (PVC-U), high- impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC –C) pipes

21-135)    BDS ISO 4435: 2008 ; Plastic piping systems for non- pressure underground drainage and sewerage- Unplasticized poly (vinyl chloride) (PVC-U)

21-136)    BDS ISO 4439: 2008 ; Unplasticized polyvinyl chloride (PVC) pipes and fittings – Determination and specification of density

21-137)    BDS ISO 5251: 2008 ; Stainless steel butt–welding fittings

21-138)    BDS ISO 6259-1: 2008 ; Thermoplastics pipes- Determination of tensile properties- Part 1: General test method

21-139)    BDS ISO 6259-2: 2008 ; Thermoplastics pipes- Determination of tensile properties- Part 2: Pipes made of unplasticized poly (vinyl chloride) (PVC-U), Chlorinated poly (vinyl chloride) (PVC-C), and high – impact poly (vinyl chloride) (PVC-HI)

21-140)    BDS ISO 6761: 2008 ; Steel tubes – Preparation of ends of tubes and fittings for welding

21-141)    BDS ISO 6964:2010 ; Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification

21-142)    BDS ISO 6992: 2008 ; Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply – Extractability of cadmium and mercury occurring as impurities

21-143)    BDS ISO 9624:2010 ; Thermoplastics pipes for fluids under pressure — Mating dimensions of flange adapters and loose backing flanges

21-144)    BS 1010 ; Specification for Draw-Off Taps and Stopvalves for Water Services;

21-145)    BS 1125: 1987 ; Specification for WC Flushing Cisterns (Including Dual Flash Cisterns and Flush Pipes);

21-146)    BS 1212 3 (Parts) ; Specification for Float Operated Valves (excluding floats);

21-147)    BS 1244 ; Metal Sink for Domestic Purposes;

21-148)    BS 1254:1981 ; Specification for C Seats (Plastics);

21-149)    BS 1329:1974 ; Specification for Metal Hand Rinse Basins;

21-150)    BS 1415 ( 2 parts) ; Mixing Valves (Manullay Operated);

21-151)    BS 1876: 1992(1977) ; Specification for Automatic Flushing Cistern for Urinals

21-152)    BS 1968 ; Specification for Floats for Ball Valves (copper);

21-153)    BS 2456: 1973 ; Specification for Floats for Ball Valves (plastic) for Cold and Hot Water

21-154)    BS 3377:1985 ; Specification for Boilers for Use with Domestic Solid Mineral Fuel Appliances;

21-155)    BS 5163: 1986 ; Specification for Predominantly Key-Operated Cast Iron Wedge Gate Valve for Water Works;

21-156)    BS 5433: 1976 ; Specification for Underground Stop valves for Water Services (copper);

21-157)    BS 843: 1976 ; Specification for Thermal Storage Electric Water Heaters;

21-158)    BS 855:1976 ; Specification for Welded Steel Boilers for Central Heating and Indirect Hot Water Supply.

21-159)    IS 404 (Part-I)-1993 ; Specification for Lead Pipes Part I for other than Chemical Purpose (third Revision);

21-160)    ISO 160: 1980 ; Asbestos-Cement Pressure Pipes and Joints;

21-161)    ISO 2531-1991 ; Ductile Iron Pipes, Fittings and Accessories for Pressure Pipelines;

21-162)    ISO 392:1986 ; Asbestos-Cement Pipe Fittings for Building and Sanitary Purposes;

21-163)    ISO 881:1980 ; Asbestos-Cement Pipes, Joints and Fittings for Sewerage and Drainage;

 

 

 

 

 

 

Comments are closed.