Acoustics and Vibration
소음진동 시험관련
Acoustic Testing은 가정용, 산업용 그리고 우주 항공분야 등 다양한 분야에 적용되고 있습니다.
- Aeroelastic Analysis
- Modal Testing
- Vibro-acoustic Analysis
- Statistical Energy Analysis (SEA)을 이용한 Acoustic Flight Testing
- Computational Fluid Dynamics(CFD) Analysis
- Press Map Analysis
위 각 방법에 관한 Test planning을 지원하고 있습니다.
Acoustic and Airborne
- BS EN ISO 10140-1 – Laboratory Measurements of Sound Insulation of Building Elements
- BS EN ISO 10140-2 – Measurement of Airborne Sound Insulation
- BS EN ISO 10140-4 – Measurement Procedures and Requirements
- BS EN ISO 10140-5 – Requirements for Test Facilities and Equipment
- ANSI/AMCA 210/ASHRAE 51 Figure 12, Figure 15 :Aerodynamic Performance
- AMCA 300 : Acoustic Performance
- HVI 915 : Loudness Rating
- HVI 916 : Air Flow
- ANSI/AHRI 430 : Central Station Air Handling Units Aerodynamic Performance
- ASTM E90 :Acoustic Louvers Acoustic Performance
- ANSI S12.51-2002; ISO 3741: Comparison Method Reference Sound Sources Acoustic Performance
- GR-63; GR-487;ETSI EN 300 753;ISO 7779; ISO 3744; ISO 9295 Acoustic Pressure (Sound Pressure Level / Sound Power Level)
- EN 12102 : Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling Measurement of airborne noise – Determination of the sound power level
- EN 12354-1 : Building Acoustic – Part 1: Airborne sound insulation between rooms
- EN 12354-2 : Building Acoustic – Part 2: Impact sound insulation between rooms
- EN 12354-3 : Building Acoustic – Part 3: Airborne sound insulation against outdoor sound
- EN 12354-4 : Building Acoustic – Part 4: Transmission of indoor sound to the outside
- EN 12545 : Footwear, leather and imitation leather goods manufacturing machines Noise test code – Common requirements
- EN 12549 : Acoustic Noise test code for fastener driving tools
- EN 1265 : Safety of machinery Noise test code – for foundry machines and equipment
- EN 12758 : Glass in building Glazing and airborne sound insulation – Product descriptions and determination of properties
- EN 13023 : Noise measurement methods – for printing, paper converting, paper making machines and auxiliary equipment – Accuracy grades 2 and 3
- EN 1330-9 : Non-destructive testing Terms used in Acoustic emission testing
- EN 13477-1 : Non-destructive testing Acoustic emission – Part 1: Equipment description
- EN 13477-2 : Non-destructive testing Acoustic emission – Part 2: Verification of operating characteristic
- EN 13554 : Non-destructive testing Acoustic emission testing – General principles
- EN 13819-2 : Hearing protectors , Testing , Acoustic test methods
- EN 13950 : Gypsum board thermal/Acoustic insulation composite panels
- EN 14389-1 : Road traffic noise reducing devices – Part 1: Acoustical characteristics
- EN 14389-2 : Road traffic noise reducing devices – Part 2: Non-Acoustical characteristics
- EN 14462 : Surface treatment equipment Noise test code- for surface treatment equipment including its ancillary handling equipment – Accuracy grades 2 and 3
- EN 14496 : Gypsum based adhesives for thermal/Acoustic insulation composite panels and plasterboards
- EN 14584 : Non-destructive testing Acoustic emission testing – Examination of metallic pressure equipment during proof testing – Planar location of AE sources
- EN 14759 : Shutters Acoustic insulation – relative to airborne sound – Expression of performance
- EN 1501-4 : Refuse collection vehicles and their associated lifting devices Noise test code for refuse collection vehicles
- EN 15036-1 : Heating boilers airborne noise emissions from heat generators – Part 1: Airborne noise emissions from heat generators
- EN 15036-2 : Heating boilers airborne noise emissions from heat generators – Part 2: Flue gas noise emissions at the outlet of the heat generator
- EN 15042-1 : Thickness measurement , laser induced surface Acoustic waves
- EN 15251 : Indoor environmental input parameters energy performance of buildings addressing indoor air quality, thermal environment, lighting and Acoustics
- EN 15461 : Railway applications – Characterisation of the dynamic properties of track sections for pass by noise measurements
- EN 1547 : Industrial thermoprocessing equipment Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
- EN 15495 : Non Destructive testing – Acoustic emission Examination of metallic pressure equipment during proof testing – Zone location of AE sources
- EN 15610 : Railway applications – Rail roughness measurement related to rolling noise generation
- EN 15657-1 : Acoustic properties of building elements and of buildings Simplified cases- where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
- EN 15892 : Railway applications – Measurement of noise inside driver’s cabs
- EN 15910 : Water quality – Guidance on the estimation of fish abundance with mobile hydroAcoustic methods
- EN 16025-1 : Thermal and/or sound insulating products in building construction – Bound EPS ballastings – Part 1: Requirements for factory premixed EPS dry plaster
- EN 16205 : measurement of walking noise on floors
- EN 16272-1 : Railway applications – Noise barriers and related devices acting on airborne sound propagation – Test method for determining the Acoustic performance – Part 1: Intrinsic characteristics – Sound absorption in the laboratory under diffuse sound field conditions
- EN 16272-2 : Railway applications – Noise barriers and related devices acting on airborne sound propagation – Test method for determining the Acoustic performance – Part 2: Intrinsic characteristics – Airborne sound insulation in the laboratory under diffuse sound field conditions
- EN 16272-3-1 : Railway applications – Noise barriers and related devices acting on airborne sound propagation – Test method for determining the Acoustic performance – Part 3
- EN 16272-3-2 : Railway applications – Noise barriers and related devices acting on airborne sound propagation – Test method for determining the Acoustic performance – Part 3
- EN 16272-6 : Railway applications – Noise barriers and related devices acting on airborne sound propagation – Test method for determining the Acoustic performance – Part 6: Intrinsic characteristics – In situ values of airborne sound insulation under direct sound field conditions
- EN 16286-2 : Railway applications Acoustic measurements
- EN 16487 : Acoustic Test code for suspended ceilings – Sound absorption
- EN 16583 : Heat exchangers the sound power level
- EN 16644 : Rotodynamic pumps Noise test code- (vibro-Acoustics) for measuring structure- and fluid-borne noise
- EN 16703 : Acoustics Airborne sound insulation
- EN 1746 : Safety of machinery noise clauses of safety
- EN 1793-1 : Road traffic noise reducing devices – Part 1: Intrinsic characteristics of sound absorption
- EN 1793-2 : Road traffic noise reducing devices – Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
- EN 1793-3 : Road traffic noise reducing devices – Part 3: Normalized traffic noise spectrum
- EN 1793-4 : Road traffic noise reducing devices – Part 4: Intrinsic characteristics
- EN 1793-5 : Road traffic noise reducing devices – Part 5: Intrinsic characteristics
- EN 1793-6 : Road traffic noise reducing devices – Part 6: Intrinsic characteristics
- EN 1794-1 : Road traffic noise reducing devices , Non-Acoustic performance , Mechanical
- EN 1794-2 : Road traffic noise reducing devices , Non-Acoustic performance ,General safety and environmental requirements
- EN 1915-4 : Aircraft ground support equipment -Noise measurement methods and reduction
- EN 24869-1 : Acoustics Hearing protectors – Subjective method for the measurement of sound attenuation
- EN 27574-1 : Acoustics Statistical methods General considerations and definitions
- EN 27574-2 : Acoustics Methods for stated values for individual machines
- EN 27574-3 : Acoustics Simple (transition) method for stated values for batches of machines
- EN 27574-4 : Acoustics Methods for stated values for batches of machines
- EN 28960 : Refrigerators, frozen-food storage cabinets and food freezers for household and similar use – Measurement of emission of airborne Acoustical noise
- EN 29052-1 : Acoustics Materials used under floating floors in dwellings
- EN 29053 : Acoustics Determination of airflow resistance
- EN 352-5 : Hearing protectors Active noise reduction- ear-muffs
- EN 415-9 : Safety of packaging machines Noise measurement methods -for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
- EN ISO 10052 : Acoustic Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method
- EN ISO 10140-1 : Acoustic Laboratory measurement of sound insulation of building elements – Part 1: Application rules for specific products
- EN ISO 10140-2 : Acoustic Laboratory measurement of sound insulation of building elements – Part 2: Measurement of airborne sound insulation
- EN ISO 10140-3 : Acoustic Laboratory measurement of sound insulation of building elements – Part 3: Measurement of impact sound insulation
- EN ISO 10140-4 : Acoustic Laboratory measurement of sound insulation of building elements – Part 4: Measurement procedures and requirements
- EN ISO 10140-5 : Acoustic Laboratory measurement of sound insulation of building elements – Part 5: Requirements for test facilities and equipment
- EN ISO 10534-1 : Acoustic Determination of sound absorption coefficient and impedance in impedances tubes – Part 1: Method using standing wave ratio
- EN ISO 10534-2 : Acoustic Determination of sound absorption coefficient and impedance in impedances tubes – Part 2: Transfer-function method
- EN ISO 10846-1 : Acoustics and vibration – Part 1: Principles and guidelines
- EN ISO 10846-2 : Acoustics and vibration – Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
- EN ISO 10846-3 : Acoustics and vibration – Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
- EN ISO 10846-4 : Acoustics and vibration – Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
- EN ISO 10846-5 : Acoustics and vibration – Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
- EN ISO 10848-1 : Acoustic Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms – Part 1: Frame document
- EN ISO 10848-2 : Acoustic Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms – Part 2: Application to light elements when the junction has a small influence
- EN ISO 10848-3 : Acoustic Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms – Part 3: Application to light elements when the junction has a substantial influence
- EN ISO 10848-4 : Acoustic Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms – Part 4: Application to junctions with at least one heavy element -
- EN ISO 11200 : Acoustic Noise emitted by machinery and equipment – Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
- EN ISO 11201 : Acoustic Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
- EN ISO 11202 : Acoustic Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
- EN ISO 11203 : Acoustic Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
- EN ISO 11204 : Acoustic Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
- EN ISO 11205 : Acoustic Noise emitted by machinery and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
- EN ISO 11546-1 : Acoustic Determination of sound insulation performances of enclosures – Part 1: Measurements under laboratory conditions
- EN ISO 11546-2 : Acoustic Determination of sound insulation performances of enclosures – Part 2: Measurements
- EN ISO 11553-3 : Safety of machinery Noise reduction and noise measurement methods- for laser processing machines and hand-held processing devices and associated auxiliary equipment
- EN ISO 11654 : Acoustic Sound absorbers for use in buildings – Rating of sound absorption
- EN ISO 11688-1 : Acoustic Recommended practice for the design of low-noise machinery and equipment – Part 1: Planning
- EN ISO 11688-2 : Acoustic Recommended practice for the design of low-noise machinery and equipment – Part 2: Introduction to the physics of low-noise design
- EN ISO 11689 : Acoustic Procedure for the comparison of noise-emission data for machinery and equipment
- EN ISO 11690-1 : Acoustic Recommended practice for the design of low-noise workplaces containing machinery – Part 1: Noise control strategies
- EN ISO 11690-2 : Acoustic Recommended practice for the design of low-noise workplaces containing machinery – Part 2: Noise control measures
- EN ISO 11690-3 : Acoustic Recommended practice for the design of low-noise workplaces containing machinery – Part 3: Sound propagation and noise prediction in workrooms
- EN ISO 11691 : Acoustic Measurement of insertion loss of ducted silencers without flow – Laboratory survey method
- EN ISO 11819-1 : Acoustic Measurement of the influence of road surfaces on traffic noise – Part 1: Statistical Pass-By method
- EN ISO 11820 : Acoustic Measurements on silencers
- EN ISO 11821 : Acoustic Measurement of the in situ sound attenuation of a removable screen
- EN ISO 11904-1 : Acoustic Determination of sound immission from sound sources placed close to the ear – Part 1: Technique using a microphone in a real ear (MIRE technique)
- EN ISO 11904-2 : Acoustic Determination of sound immission from sound sources placed close to the ear – Part 2: Technique using a manikin
- EN ISO 11957 : Acoustic Determination of sound insulation performance of cabins – Laboratory and in situ measurements
- EN ISO 12001 : Acoustic Noise emitted by machinery and equipment – Rules for the drafting and presentation of a noise test code
- EN ISO 12999-1 : Acoustic Determination and application of measurement uncertainties in building Acoustic Part 1: Sound insulation
- EN ISO 140-18 : Acoustic Measurement of sound insulation in buildings and of building elements – Part 18: Laboratory measurement of sound generated by rainfall on building elements
- EN ISO 14163 : Acoustic Guidelines for noise control by silencers
- EN ISO 14257 : Acoustic Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their Acoustical performance
- EN ISO 14509-1 : Small craft Airborne sound emitted by powered recreational craft – Part 1: Pass-by measurement procedures
- EN ISO 14509-2 : Small craft Airborne sound emitted by powered recreational craft – Part 2: Sound assessment using reference craft
- EN ISO 14509-3 : Small craft Airborne sound emitted by powered recreational craft – Part 3: Sound assessment using calculation and measurement procedures
- EN ISO 15186-1 : Acoustic Measurement of sound insulation in buildings and of building elements using sound intensity – Part 1: Laboratory measurements
- EN ISO 15186-2 : Acoustic Measurement of sound insulation in buildings and of building elements using sound intensity – Part 2: Field measurements
- EN ISO 15186-3 : Acoustic Measurement of sound insulation in buildings and of building elements using sound intensity – Part 3: Laboratory measurements at low frequencies
- EN ISO 15667 : Acoustic Guidelines for noise control by enclosures and cabins
- EN ISO 15744 : Hand-held non-electric power tools Noise measurement code
- EN ISO 16032 : Acoustic Measurement of sound pressure level from service equipment in buildings
- EN ISO 16251-1 : Acoustic Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up – Part 1: Heavyweight compact floor
- EN ISO 16283-1 : Acoustic Field measurement of sound insulation in buildings and of building elements – Part 1: Airborne sound insulation
- EN ISO 16283-2 : Acoustic Field measurement of sound insulation in buildings and of building elements – Part 2: Impact sound insulation
- EN ISO 16283-3 : Acoustic Field measurement of sound insulation in buildings and of building elements – Part 3: Façade sound insulation
- EN ISO 1680 : Acoustic Test code for the measurement of airborne noise emitted by rotating electrical machines
- EN ISO 1683 : Acoustic Preferred reference values for Acoustical and vibratory levels
- EN ISO 17201-1 : Acoustic Noise from shooting ranges – Part 1: Determination of muzzle blast by measurement
- EN ISO 17201-2 : Acoustic Noise from shooting ranges – Part 2: Estimation of muzzle blast and projectile sound by calculation
- EN ISO 17201-3 : Acoustic Noise from shooting ranges – Part 3: Guidelines for sound propagation calculations
- EN ISO 17201-4 : Acoustic Noise from shooting ranges – Part 4: Prediction of projectile sound
- EN ISO 17201-5 : Acoustics Noise management
- EN ISO 17624 : Acoustic Guidelines for noise control in offices and workrooms by means of Acoustical screens
- EN ISO 18233 : Acoustic Application of new measurement methods in building and room Acoustics
- EN ISO 20361 : Liquid pumps and pump units Noise test code – Grades 2 and 3 of accuracy
- EN ISO 2151 : Acoustic Noise test code for compressors and vacuum pumps
- EN ISO 22868 : Forestry and gardening machinery Noise test code-for portable hand-held machines with internal combustion engine -(ISO 22868:2011)
- EN ISO 23771 : Textile machinery the noise emissions
- EN ISO 266 : Acoustic Preferred frequencies
- EN ISO 2922 : Acoustic Measurement of airborne sound emitted by vessels on inland waterways and harbours – Amendment 1
- EN ISO 3095 : Acoustic Railway applications – Measurement of noise emitted by railbound vehicles
- EN ISO 3381 : Railway applications Acoustic Measurement of noise inside railbound vehicles
- EN ISO 3382-1 : Acoustic Measurement of room Acoustic parameters – Part 1: Performance spaces
- EN ISO 3382-2 : Acoustic Measurement of room Acoustic parameters – Part 2: Reverberation time in ordinary rooms
- EN ISO 3382-3 : Acoustic Measurement of room Acoustic parameters – Part 3: Open plan offices
- EN ISO 354 : Acoustics Measurement of sound absorption in a reverberation room
- EN ISO 3740 : Acoustic Determination of sound power levels of noise sources – Guidelines for the use of basic standards
- EN ISO 3741 : Acoustic Precision methods for reverberation test rooms
- EN ISO 3743-1 : Acoustic Engineering methods for small movable sources in reverberant fields – Part 1: Comparison method for a hard-walled test room
- EN ISO 3743-2 : Acoustic Determination of sound power levels of noise sources using sound pressure – Engineering methods for small, movable sources in reverberant fields – Part 2: Methods for special reverberation test rooms
- EN ISO 3744 : Acoustic Engineering methods for an essentially free field over a reflecting plane
- EN ISO 3745 : Acoustic Precision methods for anechoic rooms and hemi-anechoic rooms
- EN ISO 3746 : Acoustic Survey method using an enveloping measurement surface over a reflecting plane
- EN ISO 3747 : Acoustic Engineering/survey methods for use in situ in a reverberant environment
- EN ISO 3822-1 : Acoustic Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 1: Method of measurement
- EN ISO 3822-2 : Acoustic Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 2: Mounting and operating conditions for draw-off taps and mixing valves
- EN ISO 3822-3 : Acoustic Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 3: Mounting and operating conditions for in-line valves and appliances
- EN ISO 3822-4 : Acoustic Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 4: Mounting and operating conditions for special appliances
- EN ISO 389-1 : Acoustic Reference zero for the calibration of audiometric equipment – Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones
- EN ISO 389-2 : Acoustic Reference zero for the calibration of audiometric equipment – Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones
- EN ISO 389-3 : Acoustic Reference zero for the calibration of audiometric equipment – Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators
- EN ISO 389-4 : Acoustic Reference zero for the calibration of audiometric equipment – Part 4: Reference levels for narrow-band masking noise
- EN ISO 389-5 : Acoustic Reference zero for the calibration of audiometric equipment – Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz
- EN ISO 389-6 : Acoustic Reference zero for the calibration of audiometric equipment – Part 6: Reference threshold of hearing for test signals of short duration
- EN ISO 389-7 : Acoustic Reference zero for the calibration of audiometric equipment – Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions
- EN ISO 389-8 : Acoustic Reference zero for the calibration of audiometric equipment – Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones
- EN ISO 389-9 : Acoustic Reference zero for the calibration of audiometric equipment – Part 9: Preferred test conditions for the determination of reference hearing threshold levels
- EN ISO 4869-2 : Acoustic Hearing protectors – Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
- EN ISO 4869-3 : Acoustic Hearing protectors – Part 3: Measurement of insertion loss of ear-muff type protectors using an Acoustic test fixture
- EN ISO 4869-4 : Acoustic Hearing protectors – Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs
- EN ISO 4871 : Acoustic Declaration and verification of noise emission values of machinery and equipment
- EN ISO 5135 : Acoustic Determination of sound power levels of noise from air terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
- EN ISO 5136 : Acoustic Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method
- EN ISO 6926 : Acoustic Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
- EN ISO 7029 : Acoustic Statistical distribution of hearing threshold as a function of age
- EN ISO 717-1 : Acoustic Rating of sound insulation in buildings and of building elements – Part 1: Airborne sound insulation
- EN ISO 717-2 : Acoustic Rating of sound insulation in buildings and of building elements – Part 2: Impact sound insulation
- EN ISO 7235 : Acoustic Laboratory measurement procedures for ducted silencers and air-terminal units – Insertion loss, flow noise and total pressure loss
- EN ISO 7779 : Acoustic Measurement of airborne noise emitted by information technology and telecommunications equipment
- EN ISO 8253-1 : Acoustic Audiometric test methods – Part 1: Pure-tone air and bone conduction audiometry
- EN ISO 8253-2 : Acoustic Audiometric test methods – Part 2: Sound field audiometry with pure-tone and narrow-band test signals
- EN ISO 8253-3 : Acoustic Audiometric test methods – Part 3: Speech audiometry
- EN ISO 9295 : Acoustic Determination of high frequency sound power levels emitted by machinery and equipment
- EN ISO 9612 : Acoustic Determination of occupational noise exposure
- EN ISO 9614-1 : Acoustic Determination of sound power levels of noise sources using sound intensity – Part 1: Measurement at discrete points
- EN ISO 9614-2 : Acoustic Determination of sound power levels of noise sources using sound intensity – Part 2: Measurement by scanning
- EN ISO 9614-3 : Acoustic Determination of sound power levels of noise sources using sound intensity – Part 3: Precision method for measurement by scanning
- EN ISO 9902-1 : Textile machinery Noise test code – Part 1: Common requirements
- EN ISO 9902-2 : Textile machinery Noise test code – Part 2: Spinning preparatory and spinning machinery
- EN ISO 9902-3 : Textile machinery Noise test code – Part 3: Nonwoven machinery
- EN ISO 9902-4 : Textile machinery Noise test code – Part 4: Yarn processing, cordage and rope manufacturing machinery
- EN ISO 9902-5 : Textile machinery Noise test code – Part 5: Weaving and knitting preparatory machinery
- EN ISO 9902-6 : Textile machinery Noise test code – Part 6: Fabric manufacturing machinery
- EN ISO 9902-7 : Textile machinery Noise test code – Part 7: Dyeing and finishing machinery