STD-ASTM B XXXX

아래 ASTM (American Society for Testing and Materials) 규격 목록은 규격번호와 제목을 발췌, 열거한 것입니다.
[출처 : www.astm.org ]

ASTM A , ASTM B | 1 || 2 |,  ASTM C , ASTM D , ASTM E ASTM F , ASTM G ,

[ASTM B000 – B999]

  • ASTM B1 : EN-Standard Specification for Hard-Drawn Copper Wire
  • ASTM B10 : EN-STANDARD SPECIFICATION FOR THE ALLOY: COPPER 88 PER CENT; TIN 10 PER CENT; ZINC 2 PER CENT
  • ASTM B100 : EN-STANDARD SPECIFICATION FOR ROLLED COPPER-ALLOY BEARING AND EXPANSION PLATES AND SHEETS FOR BRIDGE AND OTHER STRUCTURAL USES
  • ASTM B100 REV A : EN-STANDARD SPECIFICATION FOR ROLLED COPPER-ALLOY BEARING AND EXPANSION PLATES AND SHEETS FOR BRIDGE AND OTHER STRUCTURAL USES
  • ASTM B101 : EN-Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
  • ASTM B102 : EN-Standard Specification for Lead- and Tin-Alloy Die Castings
  • ASTM B103 : EN-STANDARD SPECIFICATION FOR PHOSPHOR BRONZE PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B103/B103M : EN-Standard Specification for Phosphor Bronze Plate Sheet Strip and Rolled Bar
  • ASTM B105 : EN-STANDARD SPECIFICATION FOR HARD-DRAWN COPPER ALLOY WIRES FOR ELECTRIC CONDUCTORS
  • ASTM B106 : EN-Standard Test Methods for Flexivity of Thermostat Metals
  • ASTM B107 : EN-STANDARD SPECIFICATION FOR MAGNESIUM-ALLOY EXTRUDED BARS RODS SHAPES TUBES AND WIRE
  • ASTM B107/B107M : EN-STANDARD SPECIFICATION FOR MAGNESIUM-ALLOY EXTRUDED BARS RODS SHAPES TUBES AND WIRE
  • ASTM B107M : EN-STANDARD SPECIFICATION FOR MAGNESIUM-ALLOY EXTRUDED BARS RODS SHAPES TUBES AND WIRE (METRIC) (E1-1988)
  • ASTM B107M REV A : EN-STANDARD SPECIFICATION FOR MAGNESIUM-ALLOY EXTRUDED BARS RODS SHAPES TUBES AND WIRE (METRIC)
  • ASTM B108 : EN-Standard Specification for Aluminum-Alloy Permanent Mold Castings
  • ASTM B108 REV A : EN-Standard Specification for Aluminum-Alloy Permanent Mold Castings
  • ASTM B108/B108M : EN-Standard Specification for Aluminum-Alloy Permanent Mold Castings
  • ASTM B110 : EN-Standard Test Method for DIELECTRIC STRENGTH OF ANODICALLY COATED ALUMINUM
  • ASTM B111 : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER-ALLOY SEAMLESS CONDENSER TUBES AND FERRULE STOCK
  • ASTM B111 REV A : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER-ALLOY SEAMLESS CONDENSER TUBES AND FERRULE STOCK
  • ASTM B111/B111M : EN-Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
  • ASTM B111/B111M REV A : EN-Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
  • ASTM B111M : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER-ALLOY SEAMLESS CONSENSER TUBES AND FERRULE STOCK (METRIC)
  • ASTM B111M REV A : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER-ALLOY SEAMLESS CONDENSER TUBES AND FERRULE STOCK (METRIC)
  • ASTM B114 : EN-Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
  • ASTM B115 : EN-Standard Specification for Electrolytic Cathode Copper
  • ASTM B115 REV A : EN-STANDARD SPECIFICATION FOR ELECTROLYTIC CATHODE COPPER
  • ASTM B116 : EN-Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolley Wire for Industrial Haulage
  • ASTM B117 : EN-STANDARD PRACTICE FOR OPERATING SALT SPRAY (FOG) TESTING APPARATUS
  • ASTM B117 REV A : EN-Standard Practice for Operating Salt Spray (Fog) Apparatus
  • ASTM B121 : EN-STANDARD SPECIFICATION FOR LEADED BRASS PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B121/B121M : EN-STANDARD SPECIFICATION FOR LEADED BRASS PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B122 : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL-TIN ALLOY COPPER-NICKEL- ZINC ALLOY (NICKEL SILVER) AND COPPER- NICKEL ALLOY PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B122 REV A : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL-TIN ALLOY COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) AND COPPER-NICKEL ALLOY PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B122/B122M : EN-Standard Specification for Copper-Nickel-Tin Alloy Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Alloy Plate Sheet Strip and Rolled Bar
  • ASTM B122/B122M REV A : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL-TIN ALLOY COPPER-NICKEL- ZINC ALLOY (NICKEL SILVER) AND COPPER- NICKEL ALLOY PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B124 : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER- ALLOY FORGING ROD BAR AND SHAPES
  • ASTM B124 REV A : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER-ALLOY FORGING ROD BAR AND SHAPES
  • ASTM B124/B124M : EN-Standard Specification for Copper and Copper Alloy Forging Rod Bar and Shapes
  • ASTM B124/B124M REV A : EN-Standard Specification for Copper and Copper Alloy Forging Rod Bar and Shapes
  • ASTM B124M : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER- ALLOY FORGING ROD BAR AND SHAPES (METRIC)
  • ASTM B127 : EN-STANDARD SPECIFICATION FOR NICKEL-COPPER ALLOY (UNS N04400) PLATE SHEET AND STRIP
  • ASTM B127 REV A : EN-Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate Sheet and Strip
  • ASTM B129 : EN-STANDARD SPECIFICATION FOR CARTRIDGE BRASS CARTRIDGE CASE CUPS
  • ASTM B130 : EN-Standard Specification for Commercial Bronze Strip for Bullet Jackets
  • ASTM B131 : EN-STANDARD SPECIFICATION FOR COPPER ALLOY BULLET JACKET CUPS
  • ASTM B133 : EN-STANDARD SPECIFICATION FOR COPPER ROD BAR AND SHAPES
  • ASTM B133 REV A : EN-STANDARD SPECIFICATION FOR COPPER ROD BAR AND SHAPES
  • ASTM B133M : EN-STANDARD SPECIFICATION FOR COPPER ROD BAR AND SHAPES (METRIC)
  • ASTM B133M REV A : EN-STANDARD SPECIFICATION FOR COPPER ROD BAR AND SHAPES (METRIC) (WITHDRAWN – 1994)
  • ASTM B134 : EN-STANDARD SPECIFICATION FOR BRASS WIRE
  • ASTM B134/B134M : EN-Standard Specification for Brass Wire
  • ASTM B135 : EN-Standard Specification for Seamless Brass Tube
  • ASTM B135 REV A : EN-Standard Specification for Seamless Brass Tube
  • ASTM B135 REV B : EN-STANDARD SPECIFICATION FOR SEAMLESS BRASS TUBE
  • ASTM B135M : EN-Standard Specification for Seamless Brass Tube (Metric)
  • ASTM B135M REV A : EN-Standard Specification for Seamless Brass Tube [Metric]
  • ASTM B136 : EN-Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
  • ASTM B137 : EN-Standard Test Method for Measurement of Coating Mass per Unit Area on Anodically Coated Aluminum
  • ASTM B138 : EN-STANDARD SPECIFICATION FOR MANGANESE BRONZE ROD BAR AND SHAPES
  • ASTM B138/B138M : EN-Standard Specification for Manganese Bronze Rod Bar and Shapes
  • ASTM B138M : EN-STANDARD SPECIFICATION FOR MANGANESE BRONZE ROD BAR AND SHAPES (METRIC)
  • ASTM B139 : EN-STANDARD SPECIFICATION FOR PHOSPHOR BRONZE ROD BAR AND SHAPES
  • ASTM B139/B139M : EN-Standard Specification for Phosphor Bronze Rod Bar and Shapes
  • ASTM B139M : EN-STANDARD SPECIFICATION FOR PHOSPHOR BRONZE ROD BAR AND SHAPES (METRIC)
  • ASTM B140 : EN-Standard Specification for Copper-Zinc-Lead (Leaded Red Brass or Hardware Bronze) Rod Bars and Shapes
  • ASTM B140/B140M : EN-Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod Bar and Shapes
  • ASTM B140M : EN-STANDARD SPECIFICATION FOR COPPER-ZINC-LEAD (LEADED RED BRASS OR HARDWARE BRONZE) ROD BAR AND SHAPES (METRIC)
  • ASTM B143 : EN-Specification for Tin-Bronze and Leaded Tin-Bronze Sand Castings
  • ASTM B148 : EN-STANDARD SPECIFICATION FOR ALUMINUM-BRONZE SAND CASTINGS
  • ASTM B148 REV A : EN-Standard Specification for Aluminum-Bronze Sand Castings
  • ASTM B148 REV B : EN-STANDARD SPECIFICATION FOR ALUMINUM-BRONZE SAND CASTINGS
  • ASTM B150 : EN-STANDARD SPECIFICATION FOR ALUMINUM BRONZE ROD BAR AND SHAPES
  • ASTM B150 REV A : EN-Standard Specification for Aluminum Bronze Rod Bar and Shapes
  • ASTM B150/B150M : EN-Standard Specification for Aluminum Bronze Rod Bar and Shapes
  • ASTM B150M : EN-STANDARD SPECIFICATION FOR ALUMINUM BRONZE ROD BAR AND SHAPES (METRIC)
  • ASTM B150M REV A : EN-Standard Specification for Aluminum Bronze Rod Bar and Shapes (Metric)
  • ASTM B151 : EN-Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
  • ASTM B151 REV A : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) AND COPPER-NICKEL ROD AND BAR
  • ASTM B151/B151M : EN-Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
  • ASTM B151M : EN-Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar (Metric)
  • ASTM B151M REV A : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) AND COPPER-NICKEL ROD AND BAR (METRIC)
  • ASTM B152 : EN-Standard Specification for Copper Sheet Strip Plate and Rolled Bar
  • ASTM B152 REV A : EN-STANDARD SPECIFICATION FOR COPPER SHEET STRIP PLATE AND ROLLED BAR
  • ASTM B152/B152M : EN-Standard Specification for Copper Sheet Strip Plate and Rolled Bar
  • ASTM B152/B152M REV A : EN-Standard Specification for Copper Sheet Strip Plate and Rolled Bar
  • ASTM B152M : EN-Standard Specification for Copper Sheet Strip Plate and Rolled Bar (Metric)
  • ASTM B152M REV A : EN-Standard Specification for Copper Sheet Strip Plate and Rolled Bar (Metric)
  • ASTM B153 : EN-Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
  • ASTM B154 : EN-STANDARD TEST METHOD FOR MERCUROUS NITRATE TEST FOR COPPER AND COPPER ALLOYS
  • ASTM B159 : EN-STANDARD SPECIFICATION FOR PHOSPHOR BRONZE WIRE
  • ASTM B159 REV A : EN-Standard Specification for Phosphor Bronze Wire-E1
  • ASTM B159/B159M : EN-Standard Specification for Phosphor Bronze Wire
  • ASTM B159M : EN-STANDARD SPECIFICATION FOR PHOSPHOR BRONZE WIRE (METRIC)
  • ASTM B159M REV A : EN-STANDARD SPECIFICATION FOR PHOSPHOR BRONZE WIRE (METRIC) (R 1992)
  • ASTM B16 : EN-Standard Specification for Free-Cutting Brass Rod Bar and Shapes for Use in Screw Machines
  • ASTM B16/B16M : EN-Standard Specification for Free-Cutting Brass Rod Bar and Shapes for Use in Screw Machines
  • ASTM B160 : EN-Standard Specification for Nickel Rod and Bar
  • ASTM B161 : EN-Standard Specification for Nickel Seamless Pipe and Tube
  • ASTM B162 : EN-Standard Specification for Nickel Plate Sheet and Strip
  • ASTM B162 REV A : EN-Standard Specification for Nickel Plate Sheet and Strip
  • ASTM B163 : EN-STANDARD SPECIFICATION FOR SEAMLESS NICKEL AND NICKEL ALLOY CONDENSER AND HEAT-EXCHANGER TUBES
  • ASTM B163 REV A : EN-STANDARD SPECIFICATION FOR SEAMLESS NICKEL AND NICKEL ALLOY CONDENSER AND HEAT-EXCHANGER TUBES
  • ASTM B164 : EN-Standard Specification for Nickel-Copper Alloy Rod Bar and Wire
  • ASTM B165 : EN-Standard Specification of Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
  • ASTM B166 : EN-Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600 N06601 N06603 N06690 N06693 N06025 N06045 and N06696)* and Nickel- Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod Bar and Wire
  • ASTM B166 REV A : EN-Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600 N06601 N06603 N06690 N06025 and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod Bar and Wire
  • ASTM B167 : EN-Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600 N06601 N06690 N06025 and N06045) Seamless Pipe and Tube
  • ASTM B167 REV A : EN-Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600 N06601 N06603 N06690 N06693 N06025 and N06045)* and Nickel- Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
  • ASTM B168 : EN-STANDARD SPECIFICATION FOR NICKEL-CHROMIUM-IRON ALLOYS (UNS N06600 AND N06690) PLATE SHEET AND STRIP
  • ASTM B168 REV A : EN-STANDARD SPECIFICATION FOR NICKEL-CHROMIUM-IRON ALLOYS (UNS N06600 N06601 AND N06690) AND NICKEL-CHROMIUM- COBALT-MOLYBDENUM ALLOY (UNS N06617) PLATE SHEET AND STRIP
  • ASTM B169 : EN-Standard Specification for Aluminum Bronze Sheet Strip and Rolled Bar
  • ASTM B169 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM BRONZE PLATE SHEET STRIP AND ROLLED BAR (R 1991)
  • ASTM B169/B169M : EN-Standard Specification for Aluminum Bronze Sheet Strip and Rolled Bar-Supersedes ASTM B169M-1996
  • ASTM B169M : EN-Standard Specification for Aluminum Bronze Sheet Strip and Rolled Bar (Metric)
  • ASTM B16M : EN-Standard Specification for Free-Cutting Brass Rod Bar and Shapes for Use in Screw Machines (Metric)
  • ASTM B170 : EN-STANDARD SPECIFICATION FOR OXYGEN-FREE ELECTROLYTIC COPPER – REFINERY SHAPES
  • ASTM B170 REV A : EN-STANDARD SPECIFICATION FOR OXYGEN-FREE ELECTROLYTIC COPPER – REFINERY SHAPES
  • ASTM B171 : EN-STANDARD SPECIFICATION FOR COPPER-ALLOY PLATE AND SHEET FOR PRESSURE VESSELS CONDENSERS AND HEAT EXCHANGERS
  • ASTM B171 REV A : EN-STANDARD SPECIFICATION FOR COPPER-ALLOY PLATE AND SHEET FOR PRESSURE VESSELS CONDENSERS AND HEAT EXCHANGERS
  • ASTM B171 REV B : EN-STANDARD SPECIFICATION FOR COPPER-ALLOY CONDENSER TUBE PLATES
  • ASTM B171/B171M : EN-Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels Condensers and Heat Exchangers
  • ASTM B171/B171M REV A : EN-Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels Condensers and Heat Exchangers
  • ASTM B171M : EN-STANDARD SPECIFICATION FOR COPPER-ALLOY PLATE AND SHEET FOR PRESSURE VESSELS CONDENSERS AND HEAT EXCHANGERS (METRIC)
  • ASTM B171M REV A : EN-STANDARD SPECIFICATION FOR COPPER-ALLOY CONDENSER TUBE PLATES (METRIC)
  • ASTM B172 : EN-STANDARD SPECIFICATION FOR ROPE-LAY-STRANDED COPPER CONDUCTORS HAVING BUNCH-STRANDED MEMBERS FOR ELECTRICAL CONDUCTORS (R 1985)
  • ASTM B172 REV A : EN-Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch- Stranded Members for Electrical Conductors
  • ASTM B173 : EN-Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric- Stranded Members for Electrical Conductors
  • ASTM B173 REV A : EN-Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members for Electrical Conductors
  • ASTM B174 : EN-Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
  • ASTM B176 : EN-STANDARD SPECIFICATION FOR COPPER-ALLOY DIE CASTINGS
  • ASTM B176 REV A : EN-STANDARD SPECIFICATION FOR COPPER-ALLOY DIE CASTINGS
  • ASTM B177 : EN-Standard Guide for Engineering Chromium Electroplating
  • ASTM B179 : EN-STANDARD SPECIFICATION FOR ALUMINUM ALLOYS IN INGOT FORM FOR CASTINGS FROM ALL CASTING PROCESSES
  • ASTM B179 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM ALLOYS IN INGOT FORM FOR SAND CASTINGS PERMANENT MOLD CASTINGS AND DIE CASTINGS
  • ASTM B183 : EN-Standard Practice for Preparation of Low-Carbon Steel for Electroplating
  • ASTM B187 : EN-STANDARD SPECIFICATION FOR COPPER BUS BAR ROD AND SHAPES
  • ASTM B187/B187M : EN-Standard Specification for Copper Bus Bar Rod and Shapes and General Purpose Rod Bar and Shapes
  • ASTM B187M : EN-STANDARD SPECIFICATION FOR COPPER BAR BUS BAR ROD AND SHAPES (METRIC)
  • ASTM B188 : EN-Standard Specification for Seamless Copper Bus Pipe and Tube
  • ASTM B188 REV B : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER BUS PIPE AND TUBE
  • ASTM B189 : EN-STANDARD SPECIFICATION FOR LEAD-COATED AND LEAD-ALLOY-COATED SOFT COPPER WIRE FOR ELECTRICAL PURPOSES
  • ASTM B19 : EN-STANDARD SPECIFICATION FOR CARTRIDGE BRASS SHEET STRIP PLATE BAR AND DISKS (BLANKS) (R 1993) (E1-1993)
  • ASTM B193 : EN-Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B194 : EN-STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B194 REV A : EN-STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B196 : EN-STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY ROD AND BAR
  • ASTM B196 REV A : EN-Standard Specification for Copper-Beryllium Alloy Rod and Bar
  • ASTM B196/B196M : EN-Standard Specification for Copper-Beryllium Alloy Rod and Bar
  • ASTM B196M : EN-Standard Specification for Copper-Beryllium Alloy Rod and Bar (Metric)
  • ASTM B197 : EN-STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY WIRE
  • ASTM B197 REV B : EN-STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY WIRE
  • ASTM B197/B197M : EN-Standard Specification for Copper-Beryllium Alloy Wire
  • ASTM B197M : EN-STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY WIRE (METRIC)
  • ASTM B199 : EN-Standard Specification for Magnesium-Alloy Permanent Mold Castings
  • ASTM B2 : EN-STANDARD SPECIFICATION FOR MEDIUM-HARD-DRAWN COPPER WIRE
  • ASTM B200 : EN-Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
  • ASTM B201 : EN-Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
  • ASTM B206 : EN-Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) Wire and Copper-Nickel Alloy Wire
  • ASTM B206 REV A : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) WIRE AND COPPER-NICKEL ALLOY WIRE
  • ASTM B206/B206M : EN-Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
  • ASTM B206M : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) WIRE AND COPPER-NICKEL ALLOY WIRE (METRIC)
  • ASTM B206M REV A : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) WIRE AND COPPER-NICKEL ALLOY WIRE (METRIC)
  • ASTM B208 : EN-STANDARD PRACTICE FOR PREPARING TENSION TEST SPECIMENS FOR COPPER-BASE ALLOYS FOR SAND PERMANENT MOLD CENTRIFUGAL AND CONTINUOUS CASTINGS (E1-1992)
  • ASTM B209 : EN-Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
  • ASTM B209 REV A : EN-Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
  • ASTM B209M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SHEET AND PLATE (METRIC)
  • ASTM B209M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SHEET AND PLATE (METRIC)
  • ASTM B21 : EN-Standard Specification for Naval Brass Rod Bar and Shapes
  • ASTM B21 REV B : EN-STANDARD SPECIFICATION FOR NAVAL BRASS ROD BAR AND SHAPES
  • ASTM B21/B21M : EN-Standard Specification for Naval Brass Rod Bar and Shapes
  • ASTM B210 : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES
  • ASTM B210 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES
  • ASTM B210M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES (METRIC)
  • ASTM B210M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES (METRIC)
  • ASTM B211 : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY BAR ROD AND WIRE
  • ASTM B221M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY EXTRUDED BARS RODS WIRE SHAPES AND TUBES (METRIC)
  • ASTM B221M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY EXTRUDED BARS RODS WIRE SHAPES AND TUBES (METRIC)
  • ASTM B222 REV A : EN-STANDARD SPECIFICATION FOR SINTERED IRON-COPPER STRUCTURAL PARTS
  • ASTM B223 : EN-Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • ASTM B224 : EN-Standard Classification of Coppers
  • ASTM B226 : EN-Standard Specification for Cored Annular Concentric-Lay-Stranded Copper Conductors
  • ASTM B227 : EN-Standard Specification for Hard-Drawn Copper-Clad Steel Wire
  • ASTM B228 : EN-Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
  • ASTM B229 : EN-Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
  • ASTM B23 : EN-STANDARD SPECIFICATION FOR WHITE METAL BEARING ALLOYS (KNOWN COMMERCIALLY AS “BABBITT METAL”) (R 1988)
  • ASTM B230 : EN-Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
  • ASTM B230/B230M : EN-Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
  • ASTM B230M : EN-Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes (Metric)
  • ASTM B231 : EN-Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
  • ASTM B231/B231M : EN-Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
  • ASTM B231M : EN-Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors (Metric)
  • ASTM B232 : EN-STANDARD SPECIFICATION FOR CONCENTRIC-LAY- STRANDED ALUMINUM CONDUCTORS COATED- STEEL REINFORCED (ACSR)
  • ASTM B232/B232M : EN-Standard Specification for Concentric-Lay-Stranded Aluminum Conductors Coated-Steel Reinforced (ACSR)
  • ASTM B232M : EN-STANDARD SPECIFICATION FOR CONCENTRIC-LAY- STRANDED ALUMINUM CONDUCTORS COATED STEEL-REINFORCED (ACSR) (METRIC)
  • ASTM B233 : EN-Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
  • ASTM B234 : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES FOR CONDENSERS AND HEAT EXCHANGERS
  • ASTM B234 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES FOR CONDENSERS AND HEAT EXCHANGERS
  • ASTM B234M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES FOR CONDENSERS AND HEAT EXCHANGERS (METRIC)
  • ASTM B234M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES FOR CONDENSERS AND HEAT EXCHANGERS (METRIC)
  • ASTM B234M REV B : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES FOR CONDENSERS AND HEAT EXCHANGERS (METRIC)
  • ASTM B235 : EN-Aluminum Alloy Extruded Tubes
  • ASTM B236 : EN-STANDARD SPECIFICATION FOR ALUMINUM BARS FOR ELECTRICAL PURPOSES (BUS BARS)
  • ASTM B236 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM BARS FOR ELECTRICAL PURPOSES (BUS BARS)
  • ASTM B236M : EN-STANDARD SPECIFICATION FOR ALUMINUM BARS FOR ELECTRICAL PURPOSES (BUS BARS) (METRIC)
  • ASTM B236M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM BARS FOR ELECTRICAL PURPOSES (BUS BARS) (METRIC)
  • ASTM B237 : EN-STANDARD SPECIFICATION FOR REFINED ANTIMONY
  • ASTM B240 : EN-STANDARD SPECIFICATION FOR ZINC ALLOYS IN INGOT FORM FOR DIE CASTINGS
  • ASTM B241 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED PIPE
  • ASTM B241/B241M : EN-Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
  • ASTM B241/B241M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED TUBE
  • ASTM B241M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED TUBE (METRIC)
  • ASTM B242 : EN-Standard Guide for Preparation of High-Carbon Steel for Electroplating
  • ASTM B243 : EN-Standard Terminology of Powder Metallurgy
  • ASTM B243 REV A : EN-Standard Terminology of Powder Metallurgy
  • ASTM B243 REV B : EN-STANDARD TERMINOLOGY OF POWDER METALLURGY
  • ASTM B243 REV C : EN-Standard Terminology of Powder Metallurgy
  • ASTM B244 : EN-Standard Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
  • ASTM B246 : EN-STANDARD SPECIFICATION FOR TINNED HARD-DRAWN AND MEDIUM-HARD-DRAWN COPPER WIRE FOR ELECTRICAL PURPOSES (DISCONTINUED – 1993)
  • ASTM B247 : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY DIE FORGINGS HAND FORGINGS AND ROLLED RING FORGINGS
  • ASTM B247 REV A : EN-Standard Specification for Aluminum and Aluminum-Alloy Die Forgings Hand Forgings and Rolled Ring Forgings
  • ASTM B247M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DIE FORGINGS HAND FORGINGS AND ROLLED RING FORGINGS (METRIC)
  • ASTM B247M REV A : EN-Standard Specification for Aluminum and Aluminum-Alloy Die Forgings Hand Forgings and Rolled Ring Forgings (Metric)
  • ASTM B248 : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B248 REV A : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY PLATE SHEET STRIP AND ROLLED BAR (E1-1990)
  • ASTM B248 REV B : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B248 REV C : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B248M : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY PLATE SHEET STRIP AND ROLLED BAR (METRIC)
  • ASTM B248M REV A : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY PLATE SHEET STRIP AND ROLLED BAR (METRIC)
  • ASTM B248M REV B : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY PLATE SHEET STRIP AND ROLLED BAR (METRIC)
  • ASTM B249 : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY ROD BAR AND SHAPES
  • ASTM B249 REV A : EN-Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod Bar Shapes and Forgings
  • ASTM B249/B249M : EN-Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod Bar Shapes and Forgings
  • ASTM B249M : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY ROD BAR AND SHAPES (METRIC)
  • ASTM B249M REV A : EN-Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod Bar Shapes and Forgings (Metric)
  • ASTM B250 : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER-ALLOY WIRE
  • ASTM B250/B250M : EN-Standard Specification for General Requirements for Wrought Copper Alloy Wire
  • ASTM B250M : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER- ALLOY WIRE (METRIC)
  • ASTM B251 : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT SEAMLESS COPPER AND COPPER-ALLOY TUBE
  • ASTM B251M : EN-Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube (Metric)
  • ASTM B251M REV A : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT SEAMLESS COPPER AND COPPER-ALLOY TUBE (METRIC)
  • ASTM B252 : EN-Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
  • ASTM B253 : EN-Standard Guide for Preparation of Aluminum Alloys for Electroplating
  • ASTM B254 : EN-Standard Practice for Preparation of and Electroplating on Stainless Steel
  • ASTM B255 REV A : EN-Standard Specification for Sintered Bronze Structural Parts
  • ASTM B258 : EN-Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  • ASTM B26 : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY SAND CASTINGS
  • ASTM B26 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY SAND CASTINGS
  • ASTM B26/B26M : EN-Standard Specification for Aluminum-Alloy Sand Castings
  • ASTM B26/B26M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY SAND CASTINGS
  • ASTM B263 : EN-Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
  • ASTM B265 : EN-STANDARD SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY STRIP SHEET AND PLATE
  • ASTM B265 REV A : EN-Standard Specification for Titanium and Titanium Alloy Strip Sheet and Plate
  • ASTM B265 REV B : EN-Standard Specification for Titanium and Titanium Alloy Strip Sheet and Plate
  • ASTM B267 : EN-Standard Specification for Wire for Use in Wire-Wound Resistors
  • ASTM B271 : EN-STANDARD SPECIFICATION FOR COPPER-BASE ALLOY CENTRIFUGAL CASTINGS
  • ASTM B271 REV A : EN-STANDARD SPECIFICATION FOR COPPER-BASE ALLOY CENTRIFUGAL CASTINGS
  • ASTM B272 : EN-Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
  • ASTM B275 : EN-Standard Practice for Codification of Certain Nonferrous Metals and Alloys Cast and Wrought
  • ASTM B275 REV A : EN-STANDARD PRACTICE FOR CODIFICATION OF CERTAIN NONFERROUS METALS AND ALLOYS CAST AND WROUGHT
  • ASTM B276 : EN-Standard Test Method for Apparent Porosity in Cemented Carbides
  • ASTM B277 : EN-STANDARD TEST METHOD FOR HARDNESS OF ELECTRICAL CONTACT MATERIALS (R 1984)
  • ASTM B279 : EN-Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
  • ASTM B279 REV A : EN-STANDARD TEST METHOD FOR STIFFNESS OF BARE SOFT SQUARE AND RECTANGULAR COPPER WIRE FOR MAGNET WIRE FABRICATION (R 1991)
  • ASTM B280 : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER TUBE FOR AIR CONDITIONING AND REFRIGERATION FIELD SERVICE
  • ASTM B280 REV A : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER TUBE FOR AIR CONDITIONING AND REFRIGERATION FIELD SERVICE
  • ASTM B281 : EN-Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
  • ASTM B282 REV A : EN-Standard Specification for Sintered Brass Structural Parts
  • ASTM B283 : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER- ALLOY DIE FORGINGS (HOT PRESSED)
  • ASTM B283 REV A : EN-Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
  • ASTM B284 : EN-STANDARD SPECIFICATION FOR ROSIN FLUX-CORE SOLDER
  • ASTM B286 : EN-Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
  • ASTM B29 : EN-Standard Specification for Refined Lead
  • ASTM B291 : EN-STANDARD SPECIFICATION FOR COPPER-ZINC- MANGANESE ALLOY (MANGANESE BRASS) SHEET AND STRIP
  • ASTM B294 : EN-Standard Test Method for Hardness Testing of Cemented Carbides
  • ASTM B296 : EN-Standard Practice for Temper Designations of Magnesium Alloys Cast and Wrought
  • ASTM B298 : EN-Standard Specification for Silver-Coated Soft or Annealed Copper Wire
  • ASTM B298 REV A : EN-STANDARD SPECIFICATION FOR SILVER-COATED SOFT OR ANNEALED COPPER WIRE (R 1984)(E1-1985)
  • ASTM B299 : EN-Standard Specification for Titanium Sponge
  • ASTM B3 : EN-Standard Specification for Soft or Annealed Copper Wire
  • ASTM B30 : EN-Standard Specification for Copper Alloys in Ingot Form
  • ASTM B30 REV A : EN-STANDARD SPECIFICATION FOR COPPER-BASE ALLOYS IN INGOT FORM
  • ASTM B30 REV B : EN-Standard Specification for Copper Alloys in Ingot Form
  • ASTM B301 : EN-STANDARD SPECIFICATION FOR FREE-CUTTING COPPER ROD AND BAR
  • ASTM B301/B301M : EN-Standard Specification for Free-Cutting Copper Rod Bar Wire and Shapes
  • ASTM B301M : EN-STANDARD SPECIFICATION FOR FREE CUTTING COPPER ROD AND BAR (METRIC)
  • ASTM B302 : EN-Standard Specification for Threadless Copper Pipe
  • ASTM B303 REV A : EN-STANDARD SPECIFICATION FOR COPPER-INFILTRATED SINTERED CARBON STEEL STRUCTURAL PARTS
  • ASTM B305 : EN-STANDARD TEST METHOD FOR MAXIMUM LOADING STRESS AT TEMPERATURE OF THERMOSTAT METALS (CANTILEVER BEAM METHOD)
  • ASTM B306 : EN-STANDARD SPECIFICATION FOR COPPER DRAINAGE TUBE (DWV)
  • ASTM B306 REV A : EN-Standard Specification for Copper Drainage Tube (DWV)
  • ASTM B308 : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY 6061-T6 STANDARD STRUCTURAL SHAPES ROLLED OR EXTRUDED
  • ASTM B308/B308M : EN-Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
  • ASTM B308/B308M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY 6061-T6 STANDARD STRUCTURAL SHAPES
  • ASTM B308M : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY 6061- T6 STANDARD STRUCTURAL SHAPES ROLLED OR EXTRUDED (METRIC)
  • ASTM B31 : EN-STANDARD SPECIFICATION FOR BRONZE BEARING METAL IN INGOT FORM
  • ASTM B310 REV A : EN-STANDARD SPECIFICATION FOR SINTERED CARBON STEEL STRUCTURAL PARTS (DISCONTINUED)
  • ASTM B311 : EN-Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
  • ASTM B312 : EN-Standard Test Method for Green Strength for Compacted Metal Powder Specimens
  • ASTM B313 : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ROUND WELDED TUBES
  • ASTM B313 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ROUND WELDED TUBES
  • ASTM B313/B313M : EN-Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
  • ASTM B313/B313M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ROUND WELDED TUBES
  • ASTM B313M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ROUND WELDED TUBES (METRIC)
  • ASTM B314 : EN-Standard Specification for Aluminum 1350 Wire for Communication Cable
  • ASTM B315 : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER ALLOY PIPE AND TUBE
  • ASTM B315 REV A : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER ALLOY PIPE AND TUBE
  • ASTM B316 : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY RIVET AND COLD-HEADING WIRE AND RODS
  • ASTM B316 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY RIVET AND COLD-HEADING WIRE AND RODS
  • ASTM B316/B316M : EN-Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
  • ASTM B316/B316M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY RIVET AND COLD-HEADING WIRE AND RODS
  • ASTM B316M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY RIVET AND COLD-HEADING WIRE AND RODS (METRIC)
  • ASTM B316M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY RIVET AND COLD-HEADING WIRE AND RODS (METRIC)
  • ASTM B317 : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY EXTRUDED BAR ROD PIPE AND STRUCTURAL SHAPES FOR ELECTRICAL PURPOSES (BUS CONDUCTOR)
  • ASTM B317 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY EXTRUDED BAR ROD TUBE PIPE AND STRUCTURAL SHAPES FOR ELECTRICAL PURPOSES (BUS CONDUCTOR)
  • ASTM B317/B317M : EN-Standard Specification for Aluminum-Alloy Extruded Bar Rod Tube Pipe and Structural Profiles for Electrical Purposes (Bus Conductor)
  • ASTM B319 : EN-Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
  • ASTM B32 : EN-STANDARD SPECIFICATION FOR SOLDER METAL
  • ASTM B32 REV A : EN-STANDARD SPECIFICATION FOR SOLDER METAL
  • ASTM B32 REV B : EN-STANDARD SPECIFICATION FOR SOLDER METAL
  • ASTM B320 : EN-Standard Practice for Preparation of Iron Castings for Electroplating
  • ASTM B322 : EN-Standard Guide for Cleaning Metals Prior to Electroplating
  • ASTM B324 : EN-STANDARD SPECIFICATION FOR ALUMINUM RECTANGULAR AND SQUARE WIRE FOR ELECTRICAL PURPOSES
  • ASTM B326 : EN-STANDARD TEST METHOD FOR RESISTANCE CHARACTERISTICS OF MICROCONTACTS
  • ASTM B327 : EN-Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
  • ASTM B327 REV A : EN-Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
  • ASTM B328 : EN-Standard Test Method for Density Oil Content and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
  • ASTM B329 : EN-Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
  • ASTM B33 : EN-STANDARD SPECIFICATION FOR TINNED SOFT OR ANNEALED COPPER WIRE FOR ELECTRICAL PURPOSES (R 1985)
  • ASTM B330 : EN-Standard Test Method for Fisher Number of Metal Powders and Related Compounds
  • ASTM B331 : EN-Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
  • ASTM B333 : EN-STANDARD SPECIFICATION FOR NICKEL-MOLYBDENUM ALLOY PLATE SHEET AND STRIP
  • ASTM B333 REV A : EN-Standard Specification for Nickel-Molybdenum Alloy Plate Sheet and Strip
  • ASTM B335 : EN-Standard Specification for Nickel-Molybdenum Alloy Rod
  • ASTM B335 REV A : EN-STANDARD SPECIFICATION FOR NICKEL-MOLYBDENUM ALLOY ROD
  • ASTM B337 : EN-Standard Specification for Seamless and Welded Titanium and Titanium Alloy Pipe
  • ASTM B338 : EN-STANDARD SPECIFICATION FOR SEAMLESS AND WELDED TITANIUM AND TITANIUM ALLOY TUBES FOR CONDENSERS AND HEAT EXCHANGERS
  • ASTM B338 REV A : EN-Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
  • ASTM B338 REV B : EN-Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
  • ASTM B339 : EN-Standard Specification for Pig Tin
  • ASTM B340 : EN-STANDARD TEST METHOD FOR SURETY OF MAKE OF ELECTRICAL CONTACT MATERIALS
  • ASTM B341 : EN-STANDARD SPECIFICATION FOR ALUMINUM-COATED (ALUMINIZED) STEEL CORE WIRE FOR ALUMINUM CONDUCTORS STEEL REINFORCED (ACSR/AZ) (R 1980) (E1-1981)
  • ASTM B341/B341M : EN-Standard Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors Steel Reinforced (ACSR/AZ)
  • ASTM B341M : EN-Standard Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors Steel Reinforced (ACSR/AZ) (Metric)
  • ASTM B342 : EN-STANDARD TEST METHOD FOR ELECTRICAL CONDUCTIVITY BY USE OF EDDY CURRENTS (R 1980)
  • ASTM B343 : EN-STANDARD PRACTICE FOR PREPARATION OF NICKEL FOR ELECTROPLATING WITH NICKEL (R 1985)
  • ASTM B343 REV A : EN-Standard Practice for Preparation of Nickel for Electroplating with Nickel
  • ASTM B344 : EN-Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements-Discontinued 2001; No Replacement
  • ASTM B345 : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED TUBE FOR GAS AND OIL TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
  • ASTM B345 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED TUBE FOR GAS AND OIL TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
  • ASTM B345/B345M : EN-Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
  • ASTM B345M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED TUBE FOR GAS AND OIL TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS (METRIC)
  • ASTM B345M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED TUBE FOR GAS AND OIL TRANSMISSION AND DISTRIBUTION PIPING SYSTEM (METRIC)
  • ASTM B347 : EN-STANDARD TEST METHOD FOR HARDNESS OF SINTERED METAL FRICTION MATERIALS
  • ASTM B348 : EN-Standard Specification for Titanium and Titanium Alloy Bars and Billets
  • ASTM B348 REV A : EN-Standard Specification for Titanium and Titanium Alloy Bars and Billets
  • ASTM B349 : EN-STANDARD SPECIFICATION FOR ZIRCONIUM SPONGE AND OTHER FORMS OF VIRGIN METAL FOR NUCLEAR APPLICATION (R 1987)
  • ASTM B349/B349M : EN-Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
  • ASTM B350 : EN-STANDARD SPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM ALLOY INGOTS FOR NUCLEAR APPLICATION (R 1984)
  • ASTM B350/B350M : EN-Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
  • ASTM B350/B350M REV A : EN-Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
  • ASTM B351 : EN-Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars Rod and Wire for Nuclear Application
  • ASTM B351/B351M : EN-Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars Rod and Wire for Nuclear Application
  • ASTM B352 : EN-STANDARD SPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM ALLOY SHEET STRIP AND PLATE FOR NUCLEAR APPLICATION
  • ASTM B352/B352M : EN-Standard Specification for Zirconium and Zirconium Alloy Sheet Strip and Plate for Nuclear Application
  • ASTM B353 : EN-STANDARD SPECIFICATION FOR WROUGHT ZIRCONIUM AND ZIRCONIUM ALLOY SEAMLESS AND WELDED TUBES FOR NUCLEAR SERVICE
  • ASTM B354 : EN-Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
  • ASTM B355 : EN-Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
  • ASTM B357 : EN-SPECIFICATION FOR REMELTED LITHIUM METAL IN INGOT FORM
  • ASTM B359 : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER- ALLOY SEAMLESS CONDENSER AND HEAT EXCHANGER TUBES WITH INTEGRAL FINS
  • ASTM B359 REV A : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER- ALLOY SEAMLESS CONDENSER AND HEAT EXCHANGER TUBES WITH INTEGRAL FINS
  • ASTM B359/B359M : EN-Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins
  • ASTM B359M : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER- ALLOY SEAMLESS CONDENSER AND HEAT EXCHANGER TUBES WITH INTEGRAL FINS (METRIC)
  • ASTM B359M REV A : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER- ALLOY SEAMLESS CONDENSER AND HEAT EXCHANGER TUBES WITH INTEGRAL FINS (METRIC)
  • ASTM B36 : EN-STANDARD SPECIFICATION FOR BRASS PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B36 REV A : EN-STANDARD SPECIFICATION FOR BRASS PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B36/B36M : EN-Standard Specification for Brass Plate Sheet Strip and Rolled Bar
  • ASTM B36/B36M REV A : EN-Standard Specification for Brass Plate Sheet Strip And Rolled Bar
  • ASTM B360 : EN-Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
  • ASTM B361 : EN-Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
  • ASTM B362 : EN-STANDARD TEST METHOD FOR MECHANICAL TORQUE RATE OF SPIRAL COILS OF THERMOSTAT METAL
  • ASTM B363 : EN-STANDARD SPECIFICATION FOR SEAMLESS AND WELDED UNALLOYED TITANIUM AND TITANIUM ALLOY WELDING FITTINGS
  • ASTM B363 REV A : EN-Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
  • ASTM B364 : EN-STANDARD SPECIFICATION FOR TANTALUM AND TANTALUM ALLOY INGOTS
  • ASTM B365 : EN-Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
  • ASTM B366 : EN-STANDARD SPECIFICATION FOR FACTORY-MADE WROUGHT NICKEL AND NICKEL ALLOY WELDING FITTINGS
  • ASTM B366 REV A : EN-Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
  • ASTM B366 REV B : EN-STANDARD SPECIFICATION FOR FACTORY-MADE WROUGHT NICKEL AND NICKEL ALLOY FITTINGS
  • ASTM B367 : EN-Standard Specification for Titanium and Titanium Alloy Castings
  • ASTM B367 REV A : EN-Standard Specification for Titanium and Titanium Alloy Castings
  • ASTM B367 REV B : EN-Standard Specification for Titanium and Titanium Alloy Castings
  • ASTM B368 : EN-Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
  • ASTM B369 : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL ALLOY CASTINGS
  • ASTM B369 REV A : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL ALLOY CASTINGS
  • ASTM B369 REV B : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL ALLOY CASTINGS
  • ASTM B37 : EN-Standard Specification for Aluminum for Use in Iron and Steel Manufacture
  • ASTM B370 : EN-STANDARD SPECIFICATION FOR COPPER SHEET AND STRIP FOR BUILDING CONSTRUCTION
  • ASTM B370 REV A : EN-STANDARD SPECIFICATION FOR COPPER SHEET AND STRIP FOR BUILDING CONSTRUCTION
  • ASTM B371 : EN-STANDARD SPECIFICATION FOR COPPER-ZINC-SILICON ALLOY ROD
  • ASTM B371 REV A : EN-COPPER-ZINC-SILICON ALLOY ROD SPEC. FOR
  • ASTM B371/B371M : EN-Standard Specification for Copper-Zinc-Silicon Alloy Rod
  • ASTM B372 : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER AND COPPER-ALLOY RECTANGULAR WAVEGUIDE TUBE
  • ASTM B373 : EN-Standard Specification for Aluminum Foil for Capacitors
  • ASTM B373 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM FOIL FOR CAPACITORS
  • ASTM B374 : EN-STANDARD TERMINOLOGY RELATING TO ELECTROPLATING
  • ASTM B374 REV A : EN-STANDARD TERMINOLOGY RELATING TO ELECTROPLATING
  • ASTM B376 : EN-STANDARD TEST METHOD FOR DENSITY OF SINTERED METAL FRICTION MATERIALS
  • ASTM B379 : EN-Standard Specification for Phosphorized Coppers-Refinery Shapes
  • ASTM B380 : EN-Standard Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
  • ASTM B381 : EN-Standard Specification for Titanium and Titanium Alloy Forgings
  • ASTM B381 REV A : EN-Standard Specification for Titanium and Titanium Alloy Forgings
  • ASTM B384 : EN-STANDARD SPECIFICATION FOR MOLYBDENUM AND MOLYBDENUM ALLOY FORGINGS
  • ASTM B385 : EN-STANDARD SPECIFICATION FOR MOLYBDENUM AND MOLYBDENUM BILLETS FOR REFORGING
  • ASTM B386 : EN-STANDARD SPECIFICATION FOR MOLYBDENUM AND MOLYBDENUM ALLOY PLATE SHEET STRIP AND FOIL (E1-1989)
  • ASTM B387 : EN-Standard Specification for Molybdenum and Molybdenum Alloy Bar Rod and Wire
  • ASTM B388 : EN-Standard Specification for Thermostat Metal Sheet and Strip
  • ASTM B389 : EN-Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
  • ASTM B39 : EN-Standard Specification for Nickel
  • ASTM B390 : EN-STANDARD PRACTICE FOR EVALUATING APPARENT GRAIN SIZE AND DISTRIBUTION OF CEMENTED TUNGSTEN CARBIDES (R 1982)(E1-1985)
  • ASTM B391 : EN-Standard Specification for Niobium and Niobium Alloy Ingots
  • ASTM B392 : EN-Standard Specification for Niobium and Niobium Alloy Bar Rod and Wire
  • ASTM B393 : EN-STANDARD SPECIFICATION FOR NIOBIUM AND NIOBIUM ALLOY STRIP SHEET AND PLATE
  • ASTM B394 : EN-Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
  • ASTM B395 : EN-STANDARD SPECIFICATION FOR U-BEND SEAMLESS COPPER AND COPPER ALLOY HEAT EXCHANGER AND CONDENSER TUBES
  • ASTM B395 REV A : EN-STANDARD SPECIFICATION FOR U-BEND SEAMLESS COPPER AND COPPER ALLOY HEAT EXCHANGER AND CONDENSER TUBES
  • ASTM B395/B395M : EN-Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
  • ASTM B395M : EN-STANDARD SPECIFICATION FOR U-BEND SEAMLESS COPPER AND COPPER ALLOY HEAT EXCHANGER AND CONDENSER TUBES (METRIC)
  • ASTM B395M REV A : EN-STANDARD SPECIFICATION FOR U-BEND SEAMLESS COPPER AND COPPER ALLOY HEAT EXCHANGER AND CONDENSER TUBES (METRIC)
  • ASTM B396 : EN-Standard Specification for Aluminum-Alloy 5005-H19 Wire for Electrical Purposes
  • ASTM B397 : EN-Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 5005-H19 Conductors
  • ASTM B398 : EN-Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
  • ASTM B398/B398M : EN-Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
  • ASTM B398M : EN-Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes (Metric)
  • ASTM B399 : EN-Standard Specification for Concentric-Lay- Stranded Aluminum-Alloy 6201-T81 Conductors
  • ASTM B399/B399M : EN-Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
  • ASTM B399M : EN-STANDARD SPECIFICATION FOR CONCENTRIC-LAY- STRANDED ALUMINUM ALLOY 6201-T81 CONDUCTORS (METRIC)
  • ASTM B400 : EN-Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
  • ASTM B401 : EN-Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors Steel-Reinforced (ACSR/COMP)
  • ASTM B402 : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL ALLOY PLATE AND SHEET FOR PRESSURE VESSELS
  • ASTM B402M : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL ALLOY PLATE AND SHEET FOR PRESSURE VESSELS (METRIC)
  • ASTM B403 : EN-Standard Specification for Magnesium-Alloy Investment Castings
  • ASTM B404 : EN-Standard Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins
  • ASTM B404 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS CONDENSER AND HEAT- EXCHANGER TUBES WITH INTEGRAL FINS
  • ASTM B404/B404M : EN-Standard Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins
  • ASTM B404M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS CONDENSER AND HEAT EXCHANGER TUBES WITH INTEGRAL FINS (METRIC)
  • ASTM B404M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS CONDENSER AND HEAT EXCHANGER TUBES WITH INTEGRAL FINS (METRIC)
  • ASTM B406 : EN-STANDARD TEST METHOD FOR TRANSVERSE RUPTURE STRENGTH OF CEMENTED CARBIDES (R 1982)
  • ASTM B407 : EN-STANDARD SPECIFICATION FOR NICKEL-IRON-CHROMIUM ALLOY SEAMLESS PIPE AND TUBE
  • ASTM B407 REV A : EN-Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
  • ASTM B408 : EN-STANDARD SPECIFICATION FOR NICKEL-IRON-CHROMIUM ALLOY ROD AND BAR
  • ASTM B408 REV A : EN-STANDARD SPECIFICATION FOR NICKEL-IRON-CHROMIUM ALLOY ROD AND BAR
  • ASTM B409 : EN-Standard Specification for Nickel-Iron-Chromium Alloy Plate Sheet and Strip
  • ASTM B409 REV A : EN-Standard Specification for Nickel-Iron-Chromium Alloy Plate Sheet and Strip
  • ASTM B411 : EN-Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
  • ASTM B411/B411M : EN-Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
  • ASTM B412 : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL- SILICON ALLOY WIRE
  • ASTM B413 : EN-Standard Specification for Refined Silver
  • ASTM B413 REV A : EN-Standard Specification for Refined Silver
  • ASTM B415 : EN-STANDARD SPECIFICATION FOR HARD-DRAWN ALUMINUM- CLAD STEEL WIRE
  • ASTM B416 : EN-Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
  • ASTM B417 : EN-Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
  • ASTM B418 : EN-Standard Specification for Cast and Wrought Galvanic Zinc Anodes
  • ASTM B418 REV A : EN-Standard Specification for Cast and Wrought Galvanic Zinc Anodes
  • ASTM B42 : EN-Standard Specification for Seamless Copper Pipe Standard Sizes
  • ASTM B42 REV A : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER PIPE STANDARD SIZES
  • ASTM B421 : EN-STANDARD TEST METHOD FOR ELECTRICAL RESISTIVITY OF CEMENTED TUNGSTEN CARBIDES
  • ASTM B422 : EN-Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy Copper-Nickel-Silicon-Magnesium Alloy Copper-Nickel-Silicon Alloy Copper-Nickel-Aluminum-Magnesium Alloy and Copper-Nickel- Tin Alloy Sheet and Stri
  • ASTM B422 REV A : EN-STANDARD SPECIFICATION FOR COPPER-ALUMINUM- SILICON-COBALT ALLOY AND COPPER-NICKEL-ALUMINUM- SILICON ALLOY SHEET AND STRIP
  • ASTM B422 REV B : EN-STANDARD SPECIFICATION FOR COPPER-ALUMINUM- SILICON-COBALT ALLOY COPPER-NICKEL-ALUMINUM- SILICON ALLOY AND COPPER-NICKEL-ALUMINUM- MAGNESIUM ALLOY SHEET AND STRIP (E1-1989)
  • ASTM B423 : EN-Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221) Seamless Pipe and Tube
  • ASTM B424 : EN-Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Plate Sheet and Strip
  • ASTM B424 REV A : EN-Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Plate Sheet and Strip
  • ASTM B425 : EN-STANDARD SPECIFICATION FOR NI-FE-CR-MO-CU ALLOY (UNS N08825 AND UNS N08221) ROD AND BAR
  • ASTM B426 REV A : EN-STANDARD SPECIFICATION FOR SINTERED COPPER- STEEL STRUCTURAL PARTS (DISCONTINUED)
  • ASTM B427 : EN-Standard Specification for Gear Bronze Alloy Castings
  • ASTM B427 REV A : EN-Standard Specification for Gear Bronze Alloy Castings-(Discontinued 2002; No Replacement)
  • ASTM B428 : EN-STANDARD TEST METHOD FOR ANGLE OF TWIST IN RECTANGULAR AND SQUARE COPPER AND COPPER ALLOY TUBE (R 1981)
  • ASTM B429 : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY EXTRUDED STRUCTURAL PIPE AND TUBE
  • ASTM B429 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY EXTRUDED STRUCTURAL PIPE AND TUBE
  • ASTM B429/B429M : EN-Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
  • ASTM B43 : EN-STANDARD SPECIFICATION FOR SEAMLESS RED BRASS PIPE STANDARD SIZES (E1-1989)
  • ASTM B43 REV A : EN-STANDARD SPECIFICATION FOR SEAMLESS RED BRASS PIPE STANDARD SIZES
  • ASTM B430 : EN-Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
  • ASTM B431 : EN-STANDARD PRACTICE FOR PROCESSING OF MANDRELS FOR ELECTROFORMING
  • ASTM B432 : EN-Standard Specification for Copper and Copper Alloy Clad Steel Plate
  • ASTM B432 REV A : EN-Standard Specification for Copper and Copper Alloy Clad Steel Plate
  • ASTM B434 : EN-Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003 UNS N10242) Plate Sheet and Strip
  • ASTM B434 REV A : EN-STANDARD SPECIFICATION FOR NICKEL-MOLYBDENUM- CHROMIUM-IRON ALLOY (UNS N10003) PLATE SHEET AND STRIP
  • ASTM B435 : EN-STANDARD SPECIFICATION FOR NICKEL-CHROMIUM- MOLYBDENUM-IRON ALLOY (UNS N06002) PLATE SHEET AND STRIP
  • ASTM B435 REV A : EN-Standard Specification for UNS N06002 UNS N06230 UNS N12160 and UNS R30556 Plate Sheet and Strip
  • ASTM B438 : EN-Standard Specification for Copper-Base Sintered Bearings (Oil-Impregnated)
  • ASTM B438 REV A : EN-STANDARD SPECIFICATION FOR SINTERED BRONZE BEARINGS (OIL- IMPREGNATED) (R 1989)
  • ASTM B438/B438M : EN-Standard Specification for Sintered Bronze Bearings (Oil-Impregnated)
  • ASTM B438/B438M REV A : EN-Standard Specification for Sintered Bronze Bearings (Oil-Impregnated)
  • ASTM B438M : EN-STANDARD SPECIFICATION FOR SINTERED BRONZE BEARINGS (OIL- IMPREGNATED) (METRIC) (R 1989)
  • ASTM B438M REV A : EN-Standard Specification for Sintered Bronze Bearings (Oil-Impregnated) (Metric)
  • ASTM B439 : EN-Standard Specification for Iron-Base Sintered Bearings (Oil-Impregnated)
  • ASTM B440 : EN-Standard Specification for Cadmium
  • ASTM B441 : EN-STANDARD SPECIFICATION FOR COPPER-COBALT- BERYLLIUM (UNS NO. C17500) AND COPPER- NICKEL-BERYLLIUM (UNS NO. C17510) ROD AND BAR (E1-1989)
  • ASTM B442 : EN-STANDARD SPECIFICATION FOR TOUGH-PITCH CHEMICALLY REFINED COPPER-REFINERY SHAPES
  • ASTM B443 : EN-Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Plate Sheet and Strip
  • ASTM B443 REV A : EN-STANDARD SPECIFICATION FOR NICKEL-CHROMIUM- MOLYBDENUM-COLUMBIUM ALLOY (UNS N06625) PLATE SHEET AND STRIP
  • ASTM B444 : EN-Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
  • ASTM B445 : EN-Standard Specification for Nickel-Chromium- Iron-Columbium- Molybdenum-Tungsten Alloy (UNS N06102) Seamless Pipe and Tube
  • ASTM B446 : EN-Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Rod and Bar
  • ASTM B447 : EN-STANDARD SPECIFICATION FOR WELDED COPPER TUBE
  • ASTM B447 REV A : EN-STANDARD SPECIFICATION FOR WELDED COPPER TUBE
  • ASTM B447 REV B : EN-STANDARD SPECIFICATION FOR WELDED COPPER TUBE
  • ASTM B449 : EN-Standard Specification for Chromates on Aluminum
  • ASTM B449 REV A : EN-STANDARD PRACTICE FOR CHROMATE TREATMENTS ON ALUMINUM (R 1993)
  • ASTM B450 : EN-STANDARD PRACTICE FOR ENGINEERING DESIGN OF ELECTROFORMED ARTICLES
  • ASTM B451 : EN-Standard Specification for Copper Foil Strip and Sheet for Printed Circuits and Carrier Tapes
  • ASTM B452 : EN-STANDARD SPECIFICATION FOR COPPER-CLAD STEEL WIRE FOR ELECTRONIC APPLICATION (R 1983)
  • ASTM B453 : EN-STANDARD SPECIFICATION FOR COPPER-ZINC-LEAD ALLOY (LEADED-BRASS) ROD
  • ASTM B453/B453M : EN-Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod Bar and Shapes
  • ASTM B453M : EN-STANDARD SPECIFICATION FOR COPPER-ZINC-LEAD ALLOY (LEADED BRASS) ROD (METRIC)
  • ASTM B453M REV A : EN-STANDARD SPECIFICATION FOR COPPER-ZINC-LEAD ALLOY (LEADED BRASS) ROD (METRIC)
  • ASTM B455 : EN-Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
  • ASTM B456 : EN-STANDARD SPECIFICATION FOR ELECTRODEPOSITED COATINGS OF COPPER PLUS NICKEL PLUS CHROMIUM AND NICKEL PLUS CHROMIUM
  • ASTM B456 REV A : EN-STANDARD SPECIFICATION FOR ELECTRODEPOSITED COATINGS OF COPPER PLUS NICKEL PLUS CHROMIUM AND NICKEL PLUS CHROMIUM
  • ASTM B456 REV B : EN-STANDARD SPECIFICATION FOR ELECTRODEPOSITED COATINGS OF COPPER PLUS NICKEL PLUS CHROMIUM AND NICKEL PLUS CHROMIUM
  • ASTM B457 : EN-Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
  • ASTM B458 REV A : EN-Standard Specification for Sintered Nickel Silver Structural Parts
  • ASTM B460 : EN-STANDARD TEST METHOD FOR DYNAMIC COEFFICIENT OF FRICTION AND WEAR OF SINTERED METAL FRICTION MATERIALS UNDER DRY CONDITIONS
  • ASTM B461 : EN-STANDARD TEST METHOD FOR FRICTIONAL CHARACTERISTIC OF SINTERED METAL FRICTION MATERIALS RUN IN LUBRICANTS
  • ASTM B462 : EN-STANDARD SPECIFICATION FOR FORGED OR ROLLED UNS N08020 UNS N08024 UNS N08026 AND UNS NO8367 ALLOY PIPE FLANGES FORGED FITTINGS AND VALVES AND PARTS FOR CORROSIVE HIGH-TEMPERATURE SERVICE
  • ASTM B462 REV A : EN-Standard Specification for Forged or Rolled UNS N06030 UNS N06022 UNS N06200 UNS N08020 UNS N08024 UNS N08026 UNS N08367 UNS N10276 UNS N10665 UNS N10675 and UNS R20033 Alloy Pipe Flanges Forged Fittings a
  • ASTM B463 : EN-STANDARD SPECIFICATION FOR UNS N08020 UNS N08026 AND UNS N08024 ALLOY PLATE SHEET AND STRIP
  • ASTM B463 REV A : EN-Standard Specification for UNS N08020 UNS N08026 and UNS N08024 Alloy Plate Sheet and Strip
  • ASTM B464 : EN-Standard Specification for Welded UNS N08020 Alloy Pipe
  • ASTM B465 : EN-Standard Specification for Copper-Iron Alloy Plate Sheet Strip and Rolled Bar
  • ASTM B466 : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER- NICKEL PIPE AND TUBE
  • ASTM B466 REV A : EN-Standard Specification for Seamless Copper-Nickel Pipe and Tube-HI IVC-9
  • ASTM B466/B466M : EN-Standard Specification for Seamless Copper-Nickel Pipe and Tube
  • ASTM B466M : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER- NICKEL PIPE AND TUBE (METRIC)
  • ASTM B467 : EN-STANDARD SPECIFICATION FOR WELDED COPPER- NICKEL PIPE
  • ASTM B468 : EN-Standard Specification for Welded UNS N08020 Alloy Tubes
  • ASTM B469 : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER ALLOY TUBES FOR PRESSURE APPLICATIONS
  • ASTM B47 : EN-STANDARD SPECIFICATION FOR COPPER TROLLEY WIRE (R 1990)
  • ASTM B47 REV A : EN-Standard Specification for Copper Trolley Wire
  • ASTM B470 : EN-STANDARD SPECIFICATION FOR BONDED COPPER CONDUCTORS FOR USE IN HOOKUP WIRE FOR ELECTRONIC EQUIPMENT
  • ASTM B471 : EN-STANDARD SPECIFICATION FOR UNS N08020 UNS N08026 AND UNS N08024 NICKEL ALLOY SPRING WIRE
  • ASTM B472 : EN-STANDARD SPECIFICATION FOR UNS N08020 UNS N08026 UNS N08024 UNS N08926 AND UNS N08367 NICKEL ALLOY BILLETS AND BARS FOR REFORGING
  • ASTM B472 REV A : EN-Standard Specification for Nickel Alloy Billets and Bars for Reforging
  • ASTM B473 : EN-Standard Specification for UNS N08020 UNS N08024 and UNS N08026 Nickel Alloy Bar and Wire
  • ASTM B474 : EN-Standard Specification for Electric Fusion Welded UNS N08020 UNS N08024 and UNS N08026 Nickel Alloy Pipe
  • ASTM B475 : EN-STANDARD SPECIFICATION FOR UNS N08020 UNS N08026 AND UNS N08024 NICKEL ALLOY ROUND WEAVING WIRE
  • ASTM B476 : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT PRECIOUS METAL ELECTRICAL CONTACT MATERIALS
  • ASTM B477 : EN-STANDARD SPECIFICATION FOR GOLD-SILVER-NICKEL ELECTRICAL CONTACT ALLOY
  • ASTM B478 : EN-Standard Test Method for Cross Curvature of Thermostat Metals
  • ASTM B479 : EN-STANDARD SPECIFICATION FOR ANNEALED ALUMINUM AND ALUMINUM-ALLOY FOIL FOR FLEXIBLE BARRIER APPLICATIONS (E1-1988)
  • ASTM B479 REV A : EN-STANDARD SPECIFICATION FOR ANNEALED ALUMINUM AND ALUMINUM-ALLOY FOIL FOR FLEXIBLE BARRIER APPLICATIONS
  • ASTM B48 : EN-Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
  • ASTM B480 : EN-Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
  • ASTM B481 : EN-Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
  • ASTM B482 : EN-Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
  • ASTM B483 : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN TUBES FOR GENERAL PURPOSE APPLICATIONS
  • ASTM B483 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN TUBES FOR GENERAL PURPOSE APPLICATIONS
  • ASTM B483/B483M : EN-Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
  • ASTM B483M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN TUBES FOR GENERAL- PURPOSE APPLICATIONS (METRIC) (E1-1988)
  • ASTM B483M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN TUBES FOR GENERAL- PURPOSE APPLICATIONS (METRIC)
  • ASTM B484 REV A : EN-STANDARD SPECIFICATION FOR SINTERED NICKEL STEEL STRUCTURAL PARTS
  • ASTM B486 : EN-STANDARD SPECIFICATION FOR PASTE SOLDER
  • ASTM B487 : EN-Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
  • ASTM B488 : EN-Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
  • ASTM B489 : EN-Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
  • ASTM B49 : EN-STANDARD SPECIFICATION FOR HOT-ROLLED COPPER REDRAW ROD FOR ELECTRICAL PURPOSES (R 1983)
  • ASTM B49 REV A : EN-Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
  • ASTM B490 : EN-Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
  • ASTM B491 : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY EXTRUDED ROUND TUBES FOR GENERAL- PURPOSE APPLICATIONS
  • ASTM B491/B491M : EN-Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
  • ASTM B491/B491M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY EXTRUDED ROUND TUBES FOR GENERAL- PURPOSE APPLICATIONS (E1-1991)
  • ASTM B491M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY EXTRUDED ROUND TUBES FOR GENERAL- PURPOSE APPLICATIONS (METRIC)
  • ASTM B492 : EN-STANDARD SPECIFICATION FOR CAST COPPER-NICKEL SHIP TAILSHAFT SLEEVES
  • ASTM B493 : EN-Standard Specification for Zirconium and Zirconium Alloy Forgings
  • ASTM B493/B493M : EN-Standard Specification for Zirconium and Zirconium Alloy Forgings
  • ASTM B494 : EN-Standard Specification for Primary Zirconium
  • ASTM B494/B494M : EN-Standard Specification for Primary Zirconium
  • ASTM B495 : EN-Standard Specification for Zirconium and Zirconium Alloy Ingots
  • ASTM B496 : EN-Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
  • ASTM B497 : EN-STANDARD PRACTICE FOR MEASURING VOLTAGE DROP ON CLOSED ARCING CONTACTS
  • ASTM B498 : EN-STANDARD SPECIFICATION FOR ZINC-COATED (GALVANIZED) STEEL CORE WIRE FOR ALUMINUM CONDUCTORS STEEL REINFORCED (ACSR)
  • ASTM B498/B498M : EN-Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors Steel Reinforced (ACSR)
  • ASTM B498M : EN-Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors Steel Reinforced (ACSR) (Metric)
  • ASTM B499 : EN-Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
  • ASTM B5 : EN-STANDARD SPECIFICATION FOR ELECTROLYTIC TOUGH- PITCH COPPER REFINERY SHAPES
  • ASTM B5 REV A : EN-STANDARD SPECIFICATION FOR ELECTROLYTIC TOUGH- PITCH COPPER REFINERY SHAPES
  • ASTM B500 : EN-STANDARD SPECIFICATION FOR ZINC-COATED (GALVANIZED) AND ALUMINUM-COATED (ALUMINIZED) STRANDED STEEL CORE FOR ALUMINUM CONDUCTORS STEEL REINFORCED (ACSR) (R 1988)(E1-1988) (E2-1990)
  • ASTM B500 REV A : EN-Standard Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors Steel Reinforced (ACSR)
  • ASTM B500/B500M : EN-Standard Specification for Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors
  • ASTM B500/B500M (RL) : EN-Standard Specification for Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors
  • ASTM B500M : EN-Standard Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors Steel Reinforced (ACSR) (Metric)
  • ASTM B501 : EN-STANDARD SPECIFICATION FOR SILVER-COATED COPPER-CLAD STEEL WIRE FOR ELECTRONIC APPLICATION (R 1984)
  • ASTM B502 : EN-Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors Aluminum-Clad Steel Reinforced
  • ASTM B503 : EN-STANDARD PRACTICE FOR USE OF COPPER AND NICKEL ELECTROPLATING SOLUTIONS FOR ELECTROFORMING (R 1984)
  • ASTM B504 : EN-STANDARD TEST METHOD FOR MEASUREMENT OF THICKNESS OF METALLIC COATINGS BY THE COULOMETRIC METHOD
  • ASTM B505 : EN-STANDARD SPECIFICATION FOR COPPER-BASE ALLOY CONTINUOUS CASTINGS
  • ASTM B505 REV A : EN-STANDARD SPECIFICATION FOR COPPER-BASE ALLOY CONTINUOUS CASTINGS
  • ASTM B505 REV B : EN-STANDARD SPECIFICATION FOR COPPER-BASE ALLOY CONTINUOUS CASTINGS
  • ASTM B505/B505M : EN-Standard Specification for Copper Alloy Continuous Castings
  • ASTM B505/B505M REV A : EN-Standard Specification for Copper Alloy Continuous Castings
  • ASTM B506 : EN-Standard Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
  • ASTM B507 : EN-DESIGN OF ARTICLES TO BE ELECTROPLATED ON RACKS WITH NICKEL PRACTICE FOR (R 1979) (E1-1979)
  • ASTM B508 : EN-Standard Specification for Copper Alloy Strip for Flexible Metal Hose
  • ASTM B509 : EN-STANDARD SPECIFICATION FOR SUPPLEMENTARY REQUIREMENTS FOR NICKEL ALLOY PLATE FOR NUCLEAR APPLICATIONS
  • ASTM B510 : EN-STANDARD SPECIFICATION FOR SUPPLEMENTARY REQUIREMENTS FOR NICKEL ALLOY ROD AND BAR FOR NUCLEAR APPLICATIONS
  • ASTM B511 : EN-Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
  • ASTM B511 REV A : EN-Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
  • ASTM B512 : EN-Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
  • ASTM B513 : EN-STANDARD SPECIFICATION FOR SUPPLEMENTARY REQUIREMENTS FOR NICKEL ALLOY SEAMLESS PIPE AND TUBE FOR NUCLEAR APPLICATIONS
  • ASTM B514 : EN-Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
  • ASTM B515 : EN-STANDARD SPECIFICATION FOR WELDED UNS N08800 UNS N08810 AND UNS N08811 ALLOY TUBES
  • ASTM B516 : EN-STANDARD SPECIFICATION FOR WELDED NICKEL- CHROMIUM-IRON ALLOY (UNS N06600) TUBES
  • ASTM B517 : EN-Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600 UNS N06603 UNS N06025 and UNS N06045) Pipe
  • ASTM B518 : EN-STANDARD SPECIFICATION FOR NICKEL-CHROMIUM- IRON-COLUMBIUM- MOLYBDENUM-TUNGSTEN ALLOY (UNS N06102) ROD AND BAR
  • ASTM B519 : EN-STANDARD SPECIFICATION FOR NICKEL-CHROMIUM- IRON-COLUMBIUM- MOLYBDENUM-TUNGSTEN ALLOY (UNS NO6102) PLATE SHEET AND STRIP
  • ASTM B520 : EN-STANDARD SPECIFICATION FOR TIN-COATED COPPER- CLAD STEEL WIRE FOR ELECTRONIC APPLICATION (R 1988)
  • ASTM B521 : EN-Standard Specification for TANTALUM AND TANTALUM ALLOY TUBING
  • ASTM B522 : EN-Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
  • ASTM B523 : EN-Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
  • ASTM B523/B523M : EN-Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
  • ASTM B524 : EN-STANDARD SPECIFICATION FOR CONCENTRIC-LAY- STRANDED ALUMINUM CONDUCTORS ALUMINUM- ALLOY REINFORCED (ACAR 1350/6201)
  • ASTM B524/B524M : EN-Standard Specification for Concentric-Lay-Stranded Aluminum Conductors Aluminum-Alloy Reinforced (ACAR 1350/6201)
  • ASTM B524M : EN-STANDARD SPECIFICATION FOR CONCENTRIC-LAY- STRANDED ALUMINUM CONDUCTORS ALUMINUM- ALLOY REINFORCED (ACAR 1350/6201) (METRIC)
  • ASTM B525 REV A : EN-STANDARD SPECIFICATION FOR SINTERED AUSTENITIC STAINLESS STEEL STRUCTURAL PARTS (E1-1986)
  • ASTM B526 : EN-STANDARD TEST METHOD FOR COEFFICIENT OF FRICTION AND WEAR OF SINTERED METAL FRICTION MATERIALS UNDER DRY-CLUTCH CONDITIONS
  • ASTM B527 : EN-Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
  • ASTM B528 : EN-Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
  • ASTM B528 REV A : EN-Standard Test Method for Transverse Rupture Strength of Sintered Metal Powder Specimens
  • ASTM B530 : EN-STANDARD METHOD FOR MEASUREMENT OF COATING THICKNESSES BY THE MAGNETIC METHOD: ELECTRODEPOSITED NICKEL COATINGS ON MAGNETIC AND NONMAGNETIC SUBSTRATES
  • ASTM B531 : EN-Standard Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes
  • ASTM B532 : EN-Standard Specification for Appearance of Electroplated Plastic Surfaces
  • ASTM B533 : EN-Standard Test Method for Peel Strength of Metal Electroplated Plastics
  • ASTM B534 : EN-STANDARD SPECIFICATION FOR COPPER-COBALT- BERYLLIUM ALLOY AND COPPER-NICKEL-BERYLLIUM ALLOY PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B535 : EN-STANDARD SPECIFICATION FOR NICKEL-IRON- CHROMIUM-SILICON ALLOY (UNS NO8330 AND UNS NO8332) SEAMLESS PIPE
  • ASTM B536 : EN-STANDARD SPECIFICATION FOR NICKEL-IRON- CHROMIUM-SILICON ALLOYS (UNS N08330 AND N08332) PLATE SHEET AND STRIP
  • ASTM B537 : EN-Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
  • ASTM B538 : EN-STANDARD METHOD OF FACT (FORD ANODIZED ALUMINUM CORROSION TEST) TESTING
  • ASTM B539 : EN-STANDARD TEST METHODS FOR MEASURING CONTACT RESISTANCE OF ELECTRICAL CONNECTIONS (STATIC CONTACTS) (R 1985)
  • ASTM B540 : EN-Standard Specification for Palladium Electrical Contact Alloy
  • ASTM B541 : EN-STANDARD SPECIFICATION FOR GOLD ELECTRICAL CONTACT ALLOY
  • ASTM B542 : EN-Standard Terminology Relating to Electrical Contacts and Their Use
  • ASTM B543 : EN-Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
  • ASTM B543 REV A : EN-STANDARD SPECIFICATION FOR WELDED COPPER AND COPPER-ALLOY HEAT EXCHANGER TUBE
  • ASTM B543 REV B : EN-STANDARD SPECIFICATION FOR WELDED COPPER AND COPPER-ALLOY HEAT EXCHANGER TUBE
  • ASTM B543M : EN-STANDARD SPECIFICATION FOR WELDED COPPER AND COPPER – ALLOY HEAT EXCHANGER TUBE (METRIC)-Discontinued 2000; No Replacement
  • ASTM B543M REV A : EN-STANDARD SPECIFICATION FOR WELDED COPPER AND COPPER-ALLOY HEAT EXCHANGER TUBE (METRIC)
  • ASTM B543M REV B : EN-STANDARD SPECIFICATION FOR WELDED COPPER AND COPPER-ALLOY HEAT EXCHANGER TUBE (METRIC)
  • ASTM B545 : EN-STANDARD SPECIFICATION FOR ELECTRODEPOSITED COATINGS OF TIN
  • ASTM B546 : EN-STANDARD SPECIFICATION FOR ELECTRIC FUSION- WELDED NI-FE-CR-SI ALLOY (UNS N08330 AND UNS NO8332) PIPE
  • ASTM B546 REV A : EN-STANDARD SPECIFICATION FOR ELECTRIC FUSION- WELDED NI-CR-CO-MO ALLOY (UNS N06617) AND NI-FE- CR-SI ALLOYS (UNS N08330 AND UNS N08332) PIPE
  • ASTM B547 : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY FORMED AND ARC-WELDED ROUND TUBE
  • ASTM B547 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY FORMED AND ARC-WELDED ROUND TUBE
  • ASTM B547/B547M : EN-STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY FORMED AND ARC-WELDED ROUND TUBE
  • ASTM B548 : EN-Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
  • ASTM B549 : EN-Standard Specificaton for Concentric-Lay-Stranded Aluminum Conductors Aluminum-Clad Steel Reinforced (ACSR/AW)
  • ASTM B550 : EN-STANDARD SPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM ALLOY BAR AND WIRE
  • ASTM B550/B550M : EN-Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
  • ASTM B551 : EN-STANDARD SPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM ALLOY STRIP SHEET AND PLATE
  • ASTM B551/B551M : EN-Standard Specification for Zirconium and Zirconium Alloy Strip Sheet and Plate
  • ASTM B552 : EN-STANDARD SPECIFICATION FOR SEAMLESS AND WELDED COPPER/NICKEL TUBES FOR WATER DESALTING PLANTS
  • ASTM B552 REV A : EN-SEAMLESS AND WELDED COPPER/NICKEL TUBES FOR WATER DESALTING PLANTS SPEC. FOR
  • ASTM B553 : EN-STANDARD TEST METHOD FOR THERMAL CYCLING OF ELECTROPLATED PLASTICS (R 1985)
  • ASTM B554 : EN-STANDARD GUIDE FOR MEASUREMENT OF THICKNESS OF METALLIC COATINGS ON NONMETALLIC SUBSTRATES
  • ASTM B555 : EN-Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test
  • ASTM B556 : EN-Standard Guide for Measurement of Thin Chromium Coatings by the Spot Test
  • ASTM B557 : EN-STANDARD METHODS OF TENSION TESTING WROUGHT AND CAST ALUMINUM- AND MAGNESIUM-ALLOY PRODUCTS (E1-1989)
  • ASTM B557 REV A : EN-Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
  • ASTM B557M : EN-Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
  • ASTM B557M REV A : EN-Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
  • ASTM B558 : EN-Standard Practice for Preparation of Nickel Alloys for Electroplating
  • ASTM B559 : EN-STANDARD SPECIFICATION FOR NICKEL-COATED COPPER-CLAD STEEL WIRE FOR ELECTRONIC APPLICATION
  • ASTM B560 : EN-Standard Specification for Modern Pewter Alloys
  • ASTM B561 : EN-STANDARD SPECIFICATION FOR REFINED PLATINUM
  • ASTM B562 : EN-Standard Specification for Refined Gold
  • ASTM B563 : EN-STANDARD SPECIFICATION FOR PALLADIUM-SILVER- COPPER ELECTRICAL CONTACT ALLOY
  • ASTM B564 : EN-STANDARD SPECIFICATION FOR NICKEL ALLOY FORGINGS
  • ASTM B564 REV A : EN-STANDARD SPECIFICATION FOR NICKEL ALLOY FORGINGS
  • ASTM B564 REV B : EN-STANDARD SPECIFICATION FOR NICKEL ALLOY FORGINGS
  • ASTM B565 : EN-Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
  • ASTM B566 : EN-STANDARD SPECIFICATION FOR COPPER-CLAD ALUMINUM WIRE (R 1983) (E1-1985)
  • ASTM B566 REV A : EN-Standard Specification for Copper-Clad Aluminum Wire
  • ASTM B567 : EN-Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
  • ASTM B567 REV A : EN-Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
  • ASTM B568 : EN-Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
  • ASTM B569 : EN-Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
  • ASTM B570 : EN-Standard Specification for Copper-Beryllium Alloy (UNS No. C17000 and C17200) Forgings and Extrusions
  • ASTM B570 REV A : EN-Standard Specification for Copper-Beryllium Alloy (UNS No. C17000 and C17200) Forgings and Extrusions
  • ASTM B570 REV B : EN-STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY FORGINGS AND EXTRUSIONS
  • ASTM B571 : EN-Standard Test Methods for Adhesion of Metallic Coatings
  • ASTM B572 : EN-Standard Specification for UNS N06002 UNS N06230 UNS N12160 and UNS R30556 Rod
  • ASTM B572 REV A : EN-STANDARD SPECIFICATION FOR UNS N06002 UNS N06230 AND UNS R30556 ROD (E1-1991)
  • ASTM B573 : EN-STANDARD SPECIFICATION FOR NICKEL-MOLYBDENUM- CHROMIUM-IRON ALLOY (UNS N10003) ROD
  • ASTM B573 REV A : EN-STANDARD SPECIFICATION FOR NICKEL-MOLYBDENUM- CHROMIUM-IRON ALLOY (UNS N10003) ROD
  • ASTM B574 : EN-Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum Low-Carbon Nickel-Molybdenum-Chromium-Tantalum Low-Carbon Nickel-Chromium-Molybdenum-Copper and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy
  • ASTM B574 REV A : EN-Standard Specification for Low-Carbon Nickel-Molybdenum-Chromium Low-Carbon Nickel-Chromium-Molybdenum Low-Carbon Nickel-Molybdenum-Chromium-Tantalum Low-Carbon Nickel-Chromium-Molybdenum-Copper and Low-Carbon Ni
  • ASTM B575 : EN-Standard Specification for Low-Carbon Nickel-Molybdenum-Chromium Low-Carbon Nickel-Chromium-Molybdenum and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate Sheet and Strip
  • ASTM B575 REV A : EN-Standard Specification for Low-Carbon Nickel-Molybdenum-Chromium Low-Carbon Nickel-Chromium-Molybdenum and Low-Carbon Nickel-Chromium-Molybdenum-Copper Low-Carbon Nickel-Chromium-Molybdenum-Tantalum and Low-Carbo
  • ASTM B576 : EN-STANDARD GUIDE FOR ARC EROSION TESTING OF ELECTRICAL CONTACT MATERIALS
  • ASTM B577 : EN-Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • ASTM B578 : EN-Standard Test Method for Microhardness of Electroplated Coatings
  • ASTM B579 : EN-Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
  • ASTM B580 : EN-Standard Specification for Anodic Oxide Coatings on Aluminum
  • ASTM B581 : EN-Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
  • ASTM B582 : EN-Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate Sheet and Strip
  • ASTM B582 REV A : EN-STANDARD SPECIFICATION FOR NICKEL-CHROMIUM- IRON-MOLYBDENUM-COPPER ALLOY PLATE SHEET AND STRIP
  • ASTM B583 : EN-STANDARD TEST METHODS FOR POROSITY IN GOLD COATINGS ON METAL SUBSTRATES
  • ASTM B584 : EN-Standard Specification for Copper Alloy Sand Castings for General Applications
  • ASTM B584 REV A : EN-Standard Specification for Copper Alloy Sand Castings for General Applications
  • ASTM B584 REV B : EN-Standard Specification for Copper Alloy Sand Castings for General Applications
  • ASTM B585 : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER-ALLOY WATER TUBE
  • ASTM B586 : EN-STANDARD SPECIFICATION FOR WELDED COPPER-ALLOY WATER TUBE
  • ASTM B587 : EN-STANDARD SPECIFICATION FOR WELDED BRASS TUBE
  • ASTM B588 : EN-Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
  • ASTM B589 : EN-Standard Specification for Refined Palladium
  • ASTM B591 : EN-STANDARD SPECIFICATION FOR COPPER-ZINC-TIN ALLOYS PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B591 REV A : EN-Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate Sheet Strip and Rolled Bar
  • ASTM B592 : EN-STANDARD SPECIFICATION FOR COPPER-ZINC-ALUMINUM -COBALT OR NICKEL-ALLOY PLATE SHEET STRIP AND ROLLED BAR
  • ASTM B593 : EN-Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
  • ASTM B594 : EN-Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
  • ASTM B595 : EN-STANDARD SPECIFICATION FOR SINTERED ALUMINUM STRUCTURAL PARTS (DISCONTINUED)
  • ASTM B596 : EN-Standard Specification for Gold-Copper Alloy Electrical Contact Material
  • ASTM B597 : EN-Standard Practice for Heat Treatment of Aluminum Alloys
  • ASTM B598 : EN-Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
  • ASTM B599 : EN-Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate Sheet and Strip
  • ASTM B6 : EN-Standard Specification for Zinc-AASHTO No.: M120-77
  • ASTM B6 REV A : EN-Standard Specification for Zinc-AASHTO No: M120-77
  • ASTM B60 : EN-STANDARD SPECIFICATION FOR CASTINGS OF ALLOY: COPPER 88 PER CENT TIN 8 PER CENT ZINC 4 PER CENT
  • ASTM B600 : EN-Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
  • ASTM B601 : EN-Standard Practice for Temper Designations for Copper and Copper Alloys – Wrought and Cast
  • ASTM B601 REV A : EN-Standard Practice for Temper Designations for Copper and Copper Alloys – Wrought and Cast
  • ASTM B602 : EN-Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
  • ASTM B603 : EN-Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
  • ASTM B604 : EN-Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
  • ASTM B605 : EN-STANDARD SPECIFICATION FOR ELECTRODEPOSITED COATINGS OF TIN-NICKEL ALLOY
  • ASTM B605 REV A : EN-Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
  • ASTM B606 : EN-Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors Steel Reinforced
  • ASTM B607 : EN-Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
  • ASTM B608 : EN-STANDARD SPECIFICATION FOR WELDED COPPER-ALLOY PIPE
  • ASTM B609 : EN-Standard Specification for Aluminum 1350 Round Wire Annealed and Intermediate Tempers for Electrical Purposes
  • ASTM B609/B609M : EN-Standard Specification for Aluminum 1350 Round Wire Annealed and Intermediate Tempers for Electrical Purposes
  • ASTM B609M : EN-STANDARD SPECIFICATION FOR ALUMINUM 1350 ROUND WIRE ANNEALED AND INTERMEDIATE TEMPERS FOR ELECTRICAL PURPOSES (METRIC)
  • ASTM B61 : EN-STANDARD SPECIFICATION FOR STEAM OR VALVE BRONZE CASTINGS
  • ASTM B610 : EN-Standard Test Method for Measuring Dimensional Change of Metal Powder Specimens Due to Sintering
  • ASTM B611 : EN-Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
  • ASTM B612 : EN-STANDARD SPECIFICATION FOR IRON BRONZE SINTERED BEARINGS (OIL- IMPREGNATED)
  • ASTM B613 : EN-Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
  • ASTM B614 : EN-Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
  • ASTM B615 : EN-Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
  • ASTM B616 : EN-STANDARD SPECIFICATION FOR REFINED RHODIUM
  • ASTM B617 : EN-Standard Specification for Coin Silver Electrical Contact Alloy
  • ASTM B618 : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY INVESTMENT CASTINGS
  • ASTM B618 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY INVESTMENT CASTINGS
  • ASTM B618/B618M : EN-Standard Specification for Aluminum-Alloy Investment Castings
  • ASTM B619 : EN-STANDARD SPECIFICATION FOR WELDED NICKEL AND NICKEL-COBALT ALLOY PIPE
  • ASTM B619 REV A : EN-Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
  • ASTM B619 REV B : EN-STANDARD SPECIFICATION FOR WELDED NICKEL AND NICKEL-COBALT ALLOY PIPE
  • ASTM B62 : EN-STANDARD SPECIFICATION FOR COMPOSITION BRONZE OR OUNCE METAL CASTINGS
  • ASTM B620 : EN-Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate Sheet and Strip
  • ASTM B620 REV A : EN-Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate Sheet and Strip
  • ASTM B621 : EN-Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
  • ASTM B621 REV A : EN-Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
  • ASTM B622 : EN-Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
  • ASTM B622 REV A : EN-Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
  • ASTM B622 REV B : EN-STANDARD SPECIFICATION FOR SEAMLESS NICKEL AND NICKEL-COBALT ALLOY PIPE AND TUBE
  • ASTM B623 : EN-TOUGH-PITCH FIRE-REFINED HIGH-CONDUCTIVITY COPPER-REFINERY SHAPES SPEC. FOR
  • ASTM B624 : EN-Standard Specification for High-Strength High-Conductivity Copper-Alloy Wire for Electronic Application
  • ASTM B625 : EN-STANDARD SPECIFICATION FOR UNS N08904 UNS N08925 UNS N08031 AND UNS NO8932 PLATE SHEET AND STRIP
  • ASTM B625 REV A : EN-STANDARD SPECIFICATION FOR UNS N08904 UNS N08925 UNS N08031 UNS N08932 AND UNS N08926 PLATE SHEET AND STRIP
  • ASTM B626 : EN-STANDARD SPECIFICATION FOR WELDED NICKEL AND NICKEL-COBALT ALLOY TUBE
  • ASTM B626 REV A : EN-STANDARD SPECIFICATION FOR WELDED NICKEL AND NICKEL-COBALT ALLOY TUBE
  • ASTM B626 REV B : EN-STANDARD SPECIFICATION FOR WELDED NICKEL AND NICKEL-COBALT ALLOY TUBE
  • ASTM B627 : EN-Standard Test Method for Electrolytic Corrosion Testing (EC Test)
  • ASTM B628 : EN-Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
  • ASTM B629 : EN-Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
  • ASTM B63 : EN-STANDARD TEST METHOD FOR RESISTIVITY OF METALLICALLY CONDUCTING RESISTANCE AND CONTACT MATERIALS
  • ASTM B630 : EN-Standard Practice for Preparation of Chromium for Electroplating with Chromium
  • ASTM B631 : EN-STANDARD SPECIFICATION FOR SILVER-TUNGSTEN ELECTRICAL CONTACT MATERIALS
  • ASTM B632 : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY ROLLED TREAD PLATE
  • ASTM B632 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY ROLLED TREAD PLATE
  • ASTM B632/B632M : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY ROLLED TREAD PLATE
  • ASTM B632M : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY ROLLED TREAD PLATE (METRIC)
  • ASTM B632M REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM-ALLOY ROLLED TREAD PLATE (METRIC)
  • ASTM B633 : EN-Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
  • ASTM B634 : EN-Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
  • ASTM B635 : EN-Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
  • ASTM B636 : EN-Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
  • ASTM B637 : EN-STANDARD SPECIFICATION FOR PRECIPITATION- HARDENING NICKEL ALLOY BARS FORGINGS AND FORGING STOCK FOR HIGH- TEMPERATURE SERVICE
  • ASTM B637 REV A : EN-Standard Specification for Precipitation-Hardening Nickel Alloy Bars Forgings and Forging Stock for High-Temperature Service
  • ASTM B638 : EN-STANDARD SPECIFICATION FOR COPPER AND COPPER- ALLOY SOLAR HEAT ABSORBER PANELS
  • ASTM B639 : EN-Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod Bar Forgings and Forging Stock for High-Temperature Service
  • ASTM B640 : EN-STANDARD SPECIFICATION FOR WELDED COPPER AND COPPER ALLOY TUBE FOR AIR CONDITIONING AND REFRIGERATION SERVICE
  • ASTM B641 : EN-STANDARD SPECIFICATION FOR SEAMLESS AND WELDED COPPER DISTRIBUTION TUBE (TYPE D)
  • ASTM B642 : EN-STANDARD SPECIFICATION FOR WELDED COPPER ALLOY UNS NO. C21000 WATER TUBE
  • ASTM B643 : EN-Standard Specification for Copper-Beryllium Alloy Seamless Tube
  • ASTM B644 : EN-STANDARD SPECIFICATION FOR COPPER ALLOY ADDITION AGENTS
  • ASTM B645 : EN-Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
  • ASTM B646 : EN-Standard Practice for Fracture Toughness Testing of Aluminum Alloys
  • ASTM B646 REV A : EN-Standard Practice for Fracture Toughness Testing of Aluminum Alloys
  • ASTM B647 : EN-Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
  • ASTM B648 : EN-Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
  • ASTM B649 : EN-SStandard Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904) Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925 UNS N08031 UNS N08354 and UNS N08926) and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and
  • ASTM B649 REV A : EN-STANDARD SPECIFICATION FOR NI-FE-CR-MO-CU LOW-CARBON ALLOY (UNS N08904) AND NI-FE-CR-MO-CU-N LOW CARBON ALLOYS (UNS N08925 UNS N08031 AND UNS N08926) BAR AND WIRE
  • ASTM B650 : EN-Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
  • ASTM B651 : EN-Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
  • ASTM B652 : EN-STANDARD SPECIFICATION FOR NIOBIUM-HAFNIUM ALLOY INGOTS
  • ASTM B652/B652M : EN-Standard Specification for Niobium-Hafnium Alloy Ingots
  • ASTM B653 : EN-Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
  • ASTM B653/B653M : EN-Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
  • ASTM B654 : EN-Standard Specification for Niobium-Hafnium Alloy Foil Sheet Strip and Plate
  • ASTM B654/B654M : EN-Standard Specification for Niobium-Hafnium Alloy Foil Sheet Strip and Plate
  • ASTM B655 : EN-STANDARD SPECIFICATION FOR NIOBIUM-HAFNIUM ALLOY BAR ROD AND WIRE
  • ASTM B655/B655M : EN-Standard Specification for Niobium-Hafnium Alloy Bar and Wire
  • ASTM B656 : EN-Standard Guide for Autocatalytic (Electroless) Nickel-Phosphorus Deposition on Metals for Engineering Use
  • ASTM B657 : EN-Standard Test Method for Metallographic Determination of Microstructure in Cemented Tungsten Carbides
  • ASTM B658 : EN-Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
  • ASTM B658/B658M : EN-Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
  • ASTM B659 : EN-Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
  • ASTM B66 : EN-STANDARD SPECIFICATION FOR BRONZE CASTINGS IN THE ROUGH FOR LOCOMOTIVE WEARING PARTS
  • ASTM B66 REV A : EN-STANDARD SPECIFICATION FOR BRONZE CASTINGS FOR STEAM LOCOMOTIVE WEARING PARTS
  • ASTM B66/B66M : EN-Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
  • ASTM B660 : EN-STANDARD PRACTICES FOR PACKAGING/PACKING OF ALUMINUM AND MAGNESIUM PRODUCTS (E1-1985)
  • ASTM B661 : EN-STANDARD PRACTICE FOR HEAT TREATMENT OF MAGNESIUM ALLOYS
  • ASTM B662 : EN-Standard Specification for Silver-Molybdenum Electrical Contact Material
  • ASTM B663 : EN-Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
  • ASTM B664 : EN-STANDARD SPECIFICATION FOR 80 % SILVER-20 % GRAPHITE SLIDING CONTACT MATERIAL (R 1986)
  • ASTM B665 : EN-STANDARD PRACTICE FOR METALLOGRAPHIC SAMPLE PREPARATION OF CEMENTED CARBIDES
  • ASTM B666 : EN-STANDARD PRACTICE FOR IDENTIFICATION MARKING OF ALUMINUM PRODUCTS
  • ASTM B666/B666M : EN-Standard Practice for Identification Marking of Aluminum and Magnesium Products
  • ASTM B666M : EN-STANDARD PRACTICE FOR IDENTIFICATION MARKING OF ALUMINUM PRODUCTS (METRIC)
  • ASTM B667 : EN-Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
  • ASTM B668 : EN-Standard Specification for UNS N08028 Seamless Tubes
  • ASTM B669 : EN-STANDARD SPECIFICATION FOR ZINC ALLOYS IN INGOT FORM FOR FOUNDRY CASTINGS (E1-1984)
  • ASTM B669 REV A : EN-Standard Specification for Zinc-Aluminum Alloys in Ingot Form for Foundry and Die Castings
  • ASTM B67 : EN-STANDARD SPECIFICATION FOR CAR AND TENDER JOURNAL BEARINGS LINED
  • ASTM B67 REV A : EN-Standard Specification for Car and Tender Journal Bearings Lined-(Discontinued 2002; No Replacement)
  • ASTM B670 : EN-Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate Sheet and Strip for High-Temperature Service
  • ASTM B671 : EN-Standard Specification for Refined Iridium
  • ASTM B672 : EN-STANDARD SPECIFICATION FOR NICKEL-IRON-CHROMIUM -MOLYBDENUM-COLUMBIUM STABILIZED ALLOY (UNS N08700) BAR AND WIRE
  • ASTM B673 : EN-Standard Specification for UNS N08925 UNS N08354 and UNS N08926 Welded Pipe
  • ASTM B674 : EN-Standard Specification for UNS N08904 UNS N08925 and UNS N08926 Welded Tube
  • ASTM B675 : EN-STANDARD SPECIFICATION FOR UNS N08366 WELDED PIPE
  • ASTM B675 REV A : EN-STANDARD SPECIFICATION FOR UNS N08366 AND UNS N08367 WELDED PIPE
  • ASTM B676 : EN-Standard Specification for UNS N08367 Welded Tube
  • ASTM B677 : EN-STANDARD SPECIFICATION FOR UNS N08904 AND UNS N08925 SEAMLESS PIPE AND TUBE
  • ASTM B678 : EN-Standard Test Method for Solderability of Metallic-Coated Products
  • ASTM B679 : EN-Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
  • ASTM B68 : EN-Standard Specification for Seamless Copper Tube Bright Annealed
  • ASTM B68 REV A : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER TUBE BRIGHT ANNEALED
  • ASTM B680 : EN-Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • ASTM B681 : EN-STANDARD METHOD FOR MEASUREMENT OF THICKNESS OF ANODIC COATINGS ON ALUMINUM AND OF OTHER TRANSPARENT COATINGS ON OPAQUE SURFACES USING THE LIGHT-SECTION MICROSCOPE
  • ASTM B682 : EN-Standard Specification for Standard Metric Sizes of Electrical Conductors
  • ASTM B682 REV A : EN-Standard Specification for Standard Metric Sizes of Electrical Conductors
  • ASTM B683 : EN-Standard Specification for Pure Palladium Electrical Contact Material
  • ASTM B684 : EN-Standard Specification for Platinum-Iridium Electrical Contact Materials
  • ASTM B685 : EN-STANDARD SPECIFICATION FOR PALLADIUM-COPPER ELECTRICAL CONTACT MATERIAL (R 1986)
  • ASTM B686 : EN-Standard Specification for Aluminum Alloy Castings High-Strength
  • ASTM B686 REV A : EN-Standard Specification for Aluminum Alloy Castings High-Strength
  • ASTM B686/B686M : EN-Standard Specification for Aluminum Alloy Castings High-Strength
  • ASTM B687 : EN-STANDARD SPECIFICATION FOR BRASS COPPER AND CHROMIUM-PLATED PIPE NIPPLES
  • ASTM B688 : EN-STANDARD SPECIFICATION FOR CHROMIUM-NICKEL- MOLYBDENUM-IRON (UNS N08366 AND UNS N08367) PLATE SHEET AND STRIP
  • ASTM B689 : EN-Standard Specification for Electroplated Engineering Nickel Coatings
  • ASTM B68M : EN-Standard Specification for Seamless Copper Tube Bright Annealed (Metric)
  • ASTM B68M REV A : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER TUBE BRIGHT ANNEALED (METRIC)
  • ASTM B69 : EN-Standard Specification for Rolled Zinc
  • ASTM B69 REV A : EN-Standard Specification for Rolled Zinc
  • ASTM B690 : EN-STANDARD SPECIFICATION FOR IRON-NICKEL- CHROMIUM-MOLYBDENUM ALLOYS (UNS N08366 AND UNS N08367) SEAMLESS PIPE AND TUBE
  • ASTM B691 : EN-STANDARD SPECIFICATION FOR IRON-NICKEL-CHROMIUM -MOLYBDENUM ALLOYS (UNS N08366 AND UNS N08367) ROD BAR AND WIRE
  • ASTM B692 : EN-STANDARD SPECIFICATION FOR 75 % SILVER – 25 % GRAPHITE SLIDING CONTACT MATERIAL (R 1986)
  • ASTM B693 : EN-Standard Specification for Silver-Nickel Electrical Contact Materials
  • ASTM B694 : EN-STANDARD SPECIFICATION FOR COPPER COPPER ALLOY AND COPPER-CLAD STAINLESS STEEL SHEET AND STRIP FOR ELECTRICAL CABLE SHIELDING (E1-1985)
  • ASTM B695 : EN-Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
  • ASTM B696 : EN-STANDARD SPECIFICATION FOR COATINGS OF CADMIUM MECHANICALLY DEPOSITED
  • ASTM B697 : EN-STANDARD GUIDELINES FOR SELECTION OF SAMPLING PLANS FOR INSPECTION OF ELECTRODEPOSITED METALLIC COATINGS AND RELATED FINISHES ON PRODUCTS
  • ASTM B698 : EN-Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
  • ASTM B699 : EN-STANDARD SPECIFICATION FOR COATINGS OF CADMIUM VACUUM-DEPOSITED ON IRON AND STEEL
  • ASTM B70 : EN-Standard Test Method for Change of Resistance with Temperature of Metallic Materials for Electrical Heating
  • ASTM B700 : EN-Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
  • ASTM B701 : EN-Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors Steel Reinforced (ACSR/SD)
  • ASTM B701/B701M : EN-Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors Steel Reinforced (ACSR/SD)
  • ASTM B702 : EN-STANDARD SPECIFICATION FOR COPPER-TUNGSTEN ELECTRICAL CONTACT MATERIAL
  • ASTM B703 : EN-STANDARD TEST METHOD FOR APPARENT DENSITY OF METAL POWDERS USING THE ARNOLD METER
  • ASTM B704 : EN-Standard Specification for Welded UNS N06625 UNS N06219 and UNS N08825 Alloy Tubes
  • ASTM B705 : EN-Standard Specification for Nickel-Alloy (UNS N06625 and N08825) Welded Pipe
  • ASTM B706 : EN-Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
  • ASTM B707 : EN-Standard Specification for Seamless Copper Water Tube (Special Use) (Metric)
  • ASTM B707M : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER WATER TUBE (SPECIAL USE) (METRIC) (E1-1989)
  • ASTM B708 : EN-Standard Specification for Tantalum and Tantalum Alloy Plate Sheet and Strip
  • ASTM B709 : EN-Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate Sheet and Strip
  • ASTM B710 : EN-Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
  • ASTM B711 : EN-STANDARD SPECIFICATION FOR CONCENTRIC-LAY- STRANDED ALUMINUM- ALLOY CONDUCTORS STEEL REINFORCED (AACSR) (6201)
  • ASTM B712 : EN-STANDARD GUIDE FOR DETERMINATION OF SODIUM AND POTASSIUM CONTENT FOR SILVER-CADMIUM OXIDE CONTACT MATERIALS (R 1988)
  • ASTM B713 : EN-Standard Terminology Relating to Superconductors
  • ASTM B714 : EN-Standard Test Method for D-C Critical Current of Composite Superconductors
  • ASTM B715 : EN-Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
  • ASTM B716 : EN-STANDARD SPECIFICATION FOR WELDED COPPER WATER TUBE
  • ASTM B716M : EN-STANDARD SPECIFICATION FOR WELDED COPPER WATER TUBE (METRIC) (E1-1989)
  • ASTM B717 : EN-Standard Specification for Refined Ruthenium
  • ASTM B718 : EN-Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate Sheet and Strip
  • ASTM B719 : EN-Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
  • ASTM B720 : EN-Standard Specification for Seamless UNS N08310 Tube
  • ASTM B721 : EN-Standard Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts
  • ASTM B722 : EN-Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
  • ASTM B722 REV A : EN-STANDARD SPECIFICATION FOR NICKEL-CHROMIUM- MOLYBDENUM-COBALT- TUNGSTEN-IRON-SILICON ALLOY (UNS N06333) SEAMLESS PIPE AND TUBE (R 1990) (E1-1990)
  • ASTM B723 : EN-Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
  • ASTM B723 REV A : EN-STANDARD SPECIFICATION FOR NICKEL-CHROMIUM- MOLYBDENUM-COBALT- TUNGSTEN-IRON-SILICON ALLOY (UNS N06333) WELDED PIPE (R 1990) (E1-1990)
  • ASTM B724 : EN-Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage Portable Non-Caliper-Type Instrument
  • ASTM B725 : EN-Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
  • ASTM B726 : EN-STANDARD SPECIFICATION FOR NI-CR-MO-CO-W-FE-SI ALLOY (UNS N06333) WELDED TUBE
  • ASTM B727 : EN-Standard Practice for Preparation of Plastics Materials for Electroplating
  • ASTM B728 : EN-STANDARD SPECIFICATION FOR CONCENTRIC-LAY-STRANDED ALUMINUM-ALLOY CONDUCTORS STEEL REINFORCED (AACSR) (5005)
  • ASTM B729 : EN-Standard Specification for Seamless UNS N08020 UNS N08026 and UNS N08024 Nickel-Alloy Pipe and Tube
  • ASTM B730 : EN-STANDARD SPECIFICATION FOR WELDED NICKEL TUBE
  • ASTM B731 : EN-Standard Specification for 60% Palladium-40% Silver Electrical Contact Material
  • ASTM B732 : EN-Standard Test Method for Evaluating the Corrosivity of Solder Fluxes for Copper Tubing Systems
  • ASTM B733 : EN-Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
  • ASTM B734 : EN-Standard Specification for Electrodeposited Copper for Engineering Uses
  • ASTM B735 : EN-STANDARD TEST METHOD FOR POROSITY IN GOLD COATINGS ON METAL SUBSTRATES BY NITRIC ACID VAPOR
  • ASTM B736 : EN-Standard Specification for Aluminum Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
  • ASTM B736 REV A : EN-STANDARD SPECIFICATION FOR ALUMINUM ALUMINUM ALLOY AND ALUMINUM-CLAD STEEL CABLE SHIELDING STOCK
  • ASTM B737 : EN-Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
  • ASTM B738 : EN-Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
  • ASTM B739 : EN-Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
  • ASTM B740 : EN-STANDARD SPECIFICATION FOR COPPER-NICKEL-TIN SPINODAL ALLOY STRIP
  • ASTM B741 : EN-STANDARD TEST METHOD FOR POROSITY IN GOLD COATINGS ON METAL SUBSTRATES BY PAPER ELECTROGRAPHY
  • ASTM B742 : EN-STANDARD SPECIFICATION FOR FINE SILVER ELECTRICAL CONTACT FABRICATED MATERIAL
  • ASTM B743 : EN-Standard Specification for Seamless Copper Tube in Coils
  • ASTM B743 REV A : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER TUBE IN COILS
  • ASTM B744/B744M : EN-Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
  • ASTM B745/B745M : EN-STANDARD SPECIFICATION FOR CORRUGATED ALUMINUM PIPE FOR SEWERS AND DRAINS (AASHTO M196/M196M)
  • ASTM B745/B745M REV A : EN-STANDARD SPECIFICATION FOR CORRUGATED ALUMINUM PIPE FOR SEWERS AND DRAINS
  • ASTM B746/B746M : EN-STANDARD SPECIFICATION FOR CORRUGATED ALUMINUM ALLOY STRUCTURAL PLATE FOR FIELD-BOLTED PIPE PIPE-ARCHES AND ARCHES (AASHTO M219/M219M)
  • ASTM B746/B746M REV A : EN-STANDARD SPECIFICATION FOR CORRUGATED ALUMINUM ALLOY STRUCTURAL PLATE FOR FIELD-BOLTED PIPE PIPE-ARCHES AND ARCHES
  • ASTM B747 : EN-Standard Specification for Copper-Zirconium Alloy Sheet and Strip
  • ASTM B748 : EN-Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
  • ASTM B749 : EN-STANDARD SPECIFICATION FOR LEAD AND LEAD ALLOY STRIP SHEET AND PLATE PRODUCTS
  • ASTM B75 : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER TUBE
  • ASTM B75 REV A : EN-Standard Specification for Seamless Copper Tube
  • ASTM B750 : EN-STANDARD SPECIFICATION FOR ZINC-5 % ALUMINUM- MISCHMETAL ALLOY (UNS Z38510) IN INGOT FORM FOR HOT-DIP COATINGS
  • ASTM B750 REV A : EN-Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy (UNS Z38510) in Ingot Form for Hot-Dip Coatings
  • ASTM B751 : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR NICKEL AND NICKEL ALLOY SEAMLESS AND WELDED TUBE
  • ASTM B751 REV A : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR NICKEL AND NICKEL ALLOY SEAMLESS AND WELDED TUBE
  • ASTM B752 : EN-STANDARD SPECIFICATION FOR CASTINGS ZIRCONIUM- BASE CORROSION RESISTANT FOR GENERAL APPLICATION
  • ASTM B753 : EN-Standard Specification for Thermostat Component Alloys
  • ASTM B754 : EN-STANDARD TEST METHOD FOR MEASURING AND RECORDING THE DEVIATIONS FROM FLATNESS IN COPPER AND COPPER ALLOY STRIP (E1-1989)
  • ASTM B755 : EN-Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate Sheet and Strip
  • ASTM B755 REV A : EN-Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate Sheet and Strip
  • ASTM B756 : EN-Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
  • ASTM B756 REV A : EN-Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
  • ASTM B757 : EN-STANDARD SPECIFICATION FOR NICKEL-CHROMIUM- MOLYBDENUM-TUNGSTEN- ALLOYS (UNS N06110) WELDED PIPE
  • ASTM B758 : EN-Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
  • ASTM B759 : EN-Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
  • ASTM B75M : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER TUBE (METRIC)
  • ASTM B75M REV A : EN-STANDARD SPECIFICATION FOR SEAMLESS COPPER TUBE (METRIC)
  • ASTM B76 : EN-Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
  • ASTM B760 : EN-Standard Specification for Tungsten Plate Sheet and Foil
  • ASTM B761 : EN-Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
  • ASTM B762 : EN-Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
  • ASTM B763 : EN-STANDARD SPECIFICATION FOR COPPER ALLOY SAND CASTINGS FOR VALVE APPLICATION
  • ASTM B763 REV A : EN-Standard Specification for Copper Alloy Sand Castings for Valve Applications
  • ASTM B763 REV B : EN-STANDARD SPECIFICATION FOR COPPER ALLOY SAND CASTINGS FOR VALVE APPLICATION
  • ASTM B764 : EN-Standard Test Method for Simultaneous Thickness and Electrochemical Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
  • ASTM B765 : EN-Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
  • ASTM B766 : EN-Standard Specification for Electrodeposited Coatings of Cadmium
  • ASTM B767 : EN-Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
  • ASTM B768 : EN-Standard Specification for Copper-Cobalt-Beryllium Alloy Strip and Sheet
  • ASTM B769 : EN-Standard Test Method for Shear Testing of Aluminum Alloys
  • ASTM B77 : EN-Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
  • ASTM B770 : EN-Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
  • ASTM B770 REV A : EN-STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY SAND CASTINGS FOR GENERAL APPLICATIONS
  • ASTM B771 : EN-Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
  • ASTM B772 : EN-Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
  • ASTM B773 : EN-Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
  • ASTM B774 : EN-Standard Specification for Low Melting Point Alloys
  • ASTM B775 : EN-Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
  • ASTM B775 REV A : EN-STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR NICKEL AND NICKEL ALLOY SEAMLESS AND WELDED PIPE
  • ASTM B776 : EN-Standard Specification for Hafnium and Hafnium Alloy Strip Sheet and Plate
  • ASTM B776 REV A : EN-Standard Specification for Hafnium and Hafnium Alloy Strip Sheet and Plate
  • ASTM B777 : EN-Standard Specification for Tungsten Base High-Density Metal
  • ASTM B778 : EN-Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
  • ASTM B779 : EN-STANDARD SPECIFICATION FOR SHAPED WIRE COMPACT CONCENTRIC-LAY-STRANDED ALUMINUM CONDUCTORS STEEL-REINFORCED (ACSR/TW)
  • ASTM B78 : EN-Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
  • ASTM B780 : EN-Standard Specification for 75 % Silver 24.5 % Copper 0.5 % Nickel Electrical Contact Alloy
  • ASTM B781 : EN-STANDARD GUIDE FOR SILVER-CADMIUM OXIDE CONTACT MATERIAL
  • ASTM B781 REV A : EN-Standard Guide for Silver-Cadmium Oxide Contact Material
  • ASTM B782 : EN-Standard Specification for Iron Graphite Sintered Bearings (Oil-Impregnated)
  • ASTM B783 : EN-STANDARD SPECIFICATION FOR MATERIALS FOR FERROUS POWDER METALLURGY STRUCTURAL PARTS (E1-1991)
  • ASTM B784 : EN-STANDARD SPECIFICATION FOR MODIFIED CONCENTRIC- LAY-STRANDED COPPER CONDUCTORS FOR USE IN INSULATED ELECTRICAL CABLES
  • ASTM B785 : EN-STANDARD SPECIFICATION FOR COMPACT ROUND MODIFIED CONCENTRIC-LAY- STRANDED COPPER CONDUCTORS FOR USE IN INSULATED ELECTRICAL CABLES
  • ASTM B786 : EN-STANDARD SPECIFICATION FOR 19 WIRE COMBINATION UNILAY-STRANDED ALUMINUM 1350 CONDUCTORS FOR SUBSEQUENT INSULATION
  • ASTM B786 REV A : EN-Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
  • ASTM B787 : EN-STANDARD SPECIFICATION FOR 19 WIRE COMBINATION UNILAY-STRANDED COPPER CONDUCTORS FOR SUBSEQUENT INSULATION
  • ASTM B787/B787M : EN-Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
  • ASTM B788 : EN-STANDARD PRACTICE FOR INSTALLING FACTORY-MADE CORRUGATED ALUMINUM CULVERTS AND STORM SEWER PIPE
  • ASTM B788/B788M : EN-Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
  • ASTM B789 : EN-Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
  • ASTM B789/B789M : EN-Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
  • ASTM B790 : EN-STANDARD PRACTICE FOR STRUCTURAL DESIGN OF CORRUGATED ALUMINUM PIPE PIPE-ARCHES AND ARCHES FOR CULVERTS STORM SEWERS AND OTHER BURIED CONDUITS
  • ASTM B790/B790M : EN-Standard Practice for Structural Design of Corrugated Aluminum Pipe Pipe-Arches and Arches for Culverts Storm Sewers and Other Buried Conduits
  • ASTM B791 : EN-Standard Specification for Zinc-Aluminum (ZA) Alloy Foundry and Die Castings


ASTM A , ASTM B | 1 || 2 |,  ASTM C , ASTM D , ASTM E ASTM F , ASTM G ,