STD-ASTM G XXXX

아래 ASTM (American Society for Testing and Materials) 규격 목록은 규격번호와 제목을 발췌, 나열한 것입니다.
[출처 : www.astm.org ]

ASTM A , ASTM B ,  ASTM C ,  ASTM D , ASTM E ASTM F  ASTM G | 1 |

  • ASTM G 35 : STANDARD PRACTICE FOR DETERMINING THE SUSCEPTIBILITY OF STAINLESS STEELS AND RELATED NICKEL-CHROMIUM-IRON ALLOYS TO STRESS-CORROSIONCRACKING IN POLYTHIONIC ACIDS
  • ASTM G 36 : STANDARD PRACTICE FOR EVALUATING STRESS-CORROSION-CRACKING RESISTANCE OF METALS AND ALLOYS IN A BOILING MAGNESIUM CHLORIDE SOLUTION
  • ASTM G 37 : STANDARD PRACTICE FOR USE OF MATTSSON’S SOLUTION ON PH 7.2 TO EVALUATE THE STRESS-CORROSION CRACKING SUSCEPTIBILITY OF COPPER- ZINC ALLOYS
  • ASTM G 38 : STANDARD PRACTICE FOR MAKING AND USING C-RING STRESS-CORROSION TEST SPECIMENS
  • ASTM G 39 : STANDARD PRACTICE FOR PREPARATION AND USE OF BENT-BEAM STRESS- CORROSION TEST SPECIMENS
  • ASTM G 4 : STANDARD GUIDE FOR CONDUCTING CORROSION TESTS IN FIELD APPLICATIONS
  • ASTM G 40 : STANDARD TERMINOLOGY RELATING TO WEAR AND EROSION
  • ASTM G 41 : STANDARD PRACTICE FOR DETERMINING CRACKING SUSCEPTIBILITY OF METALS EXPOSED UNDER STRESS TO A HOT SALT ENVIRONMENT
  • ASTM G 42 : STANDARD TEST METHOD FOR CATHODIC DISBONDING OF PIPELINE COATINGS SUBJECTED TO ELEVATED TEMPERATURES
  • ASTM G 43 : ACIDIFIED SYNTHETIC SEA WATER (FOG) TESTING
  • ASTM G 44 : STANDARD PRACTICE FOR EXPOSURE OF METALS AND ALLOYS BY ALTERNATE IMMERSION IN NEUTRAL 3.5 % SODIUM CHLORIDE SOLUTION
  • ASTM G 45 : STANDARD RECOMMENDED PRACTICE FOR SPECIFYING LIMITS FOR FADING ANDDISCOLORATION OF NONMETALLIC MATERIALS
  • ASTM G 46 : STANDARD GUIDE FOR EXAMINATION AND EVALUATION OF PITTING CORROSION
  • ASTM G 47 : STANDARD TEST METHOD FOR DETERMINING SUSCEPTIBILITY TO STRESS- CORROSION CRACKING OF 2XXX AND 7XXX ALUMINUM ALLOY PRODUCTS
  • ASTM G 48 : STANDARD TEST METHODS FOR PITTING AND CREVICE CORROSION RESISTANCEOF STAINLESS STEELS AND RELATED ALLOYS BY USE OF FERRIC CHLORIDE SOLUTION
  • ASTM G 49 : STANDARD PRACTICE FOR PREPARATION AND USE OF DIRECT TENSION STRESS-CORROSION TEST SPECIMENS
  • ASTM G 5 : STANDARD REFERENCE TEST METHOD FOR MAKING POTENTIOSTATIC AND POTENTIODYNAMIC ANODIC POLARIZATION MEASUREMENTS
  • ASTM G 50 : STANDARD PRACTICE FOR CONDUCTING ATMOSPHERIC CORROSION TESTS ON METALS
  • ASTM G 51 : STANDARD TEST METHOD FOR MEASURING PH OF SOIL FOR USE IN CORROSIONTESTING
  • ASTM G 52 : STANDARD PRACTICE FOR EXPOSING AND EVALUATING METALS AND ALLOYS INSURFACE SEAWATER
  • ASTM G 53 : OPERATING LIGHT-AND WATER-EXPOSURE APPARATUS (FLUORESCENT UV- (FLUORESCENT UV-CONDENSATION TYPE) FOR EXPOSURE OF NONMETALLIC MATERIALS
  • ASTM G 54 : STANDARD PRACTICE FOR SIMPLE STATIC OXIDATION TESTING
  • ASTM G 55 : STANDARD TEST METHOD FOR EVALUATING PIPELINE COATING PATCH MATERIALS
  • ASTM G 56 : STANDARD TEST METHOD FOR ABRASIVENESS OF INK-IMPREGNATED FABRIC PRINTER RIBBONS
  • ASTM G 57 : STANDARD TEST METHOD FOR FIELD MEASUREMENT OF SOIL RESISTIVITY USING THE WENNER FOUR-ELECTRODE METHOD
  • ASTM G 58 : STANDARD PRACTICE FOR PREPARATION OF STRESS-CORROSION TEST SPECIMENS FOR WELDMENTS
  • ASTM G 59 : STANDARD TEST METHOD FOR CONDUCTING POTENTIODYNAMIC POLARIZATION RESISTANCE MEASUREMENTS
  • ASTM G 6 : STANDARD TEST METHOD FOR ABRASION RESISTANCE OF PIPELINE COATINGS
  • ASTM G 60 : STANDARD PRACTICE FOR CONDUCTING CYCLIC HUMIDITY EXPOSURES
  • ASTM G 61 : STANDARD TEST METHOD FOR CONDUCTING CYCLIC POTENTIODYNAMIC POLARIZATION MEASUREMENTS FOR LOCALIZED CORROSION SUSCEPTIBILITY OF IRON-, NICKEL-, OR COBALT-BASED ALLOYS
  • ASTM G 62 : STANDARD TEST METHODS FOR HOLIDAY DETECTION IN PIPELINE COATINGS
  • ASTM G 63 : STANDARD GUIDE FOR EVALUATING NONMETALLIC MATERIALS FOR OXYGEN SERVICE
  • ASTM G 64 : STANDARD CLASSIFICATION OF THE RESISTANCE TO STRESS-CORROSION CRACKING OF HEAT-TREATABLE ALUMINIUM ALLOYS
  • ASTM G 65 : STANDARD TEST METHOD FOR MEASURING ABRASION USING THE DRY SAND/RUBBER WHEEL APPARATUS
  • ASTM G 66 : STANDARD TEST METHOD FOR VISUAL ASSESSMENT OF EXFOLIATION CORROSION SUSCEPTIBILITY OF 5XXX SERIES ALUMINUM ALLOYS (ASSET TEST)
  • ASTM G 67 : STANDARD TEST METHOD FOR DETERMINING THE SUSCEPTIBILITY TO INTERGRANULAR CORROSION OF 5XXX SERIES ALUMINUM ALLOYS BY MASS LOSS AFTER EXPOSURE TO NITRIC ACID (NAMLT TEST)
  • ASTM G 68 : LIQUID SODIUM CORROSION TESTING OF METALS AND ALLO
  • ASTM G 69 : STANDARD TEST METHOD FOR MEASUREMENT OF CORROSION POTENTIALS OF ALUMINUM ALLOYS
  • ASTM G 7 : STANDARD PRACTICE FOR ATMOSPHERIC ENVIRONMENTAL EXPOSURE TESTING OF NONMETALLIC MATERIALS
  • ASTM G 70 : TEST METHOD FOR RING BENDABILITY OF PIPELINE COATINGS (SQUEEZE TEST)
  • ASTM STP 46 : TOPICAL DISCUSSION ON RADIOGRAPHIC TESTING OF AIRPLANE COMPONENTS.HELD AT THE FORTY-THIRD ANNUAL MEETING OF THE AMERICAN SOCIETY FORTESTING MATERIALS, JUNE 24, 1940
  • ASTM STP 465 : MANUAL ON LOW-CYCLE FATIGUE TESTING†
  • ASTM STP 466 : IMPACT TESTING OF MATERIAL
  • ASTM STP 470 : MANUAL ON THE USE OF THERMOCOUPLES IN TEMPERATURE MEASUREMENT
  • ASTM STP 484 : IRRADIATION EFFECTS ON STRUCTURAL ALLOYS FOR NUCLEAR REACTOR APPLICATIONS
  • ASTM STP 491 : HYDRAULIC SYSTEM CLEANLINESS: A SYMPOSIUM PRESENTED AT THE SEVENTY-THIRD ANNUAL MEETING AMERICAN SOCIETY FOR TESTING AND MATERIALS, TORONTO, ONT., CANADA, 21-26 JUNE 1970
  • ASTM STP 493 : APPLICATIONS OF ELECTRON MICROFRACTOGRAGY TO MATERIALS RESEARCH **SOFT COVER**
  • ASTM STP 497 : COMPOSITE MATERIALS: TESTING AND DESIGN
  • ASTM STP 512A : LABORATORY PERFORMANCE TESTS FOR AUTOMOTIVE GEAR LUBRIANTS INTENDED FOR API GL-5 SERVICE
  • ASTM STP 519 : CYCLIC STRESS-STRAIN BEHAVIOR:ANALYSIS,FAILURE
  • ASTM STP 542 : ANALYSIS OF SLAGS AND RELATED OXIDE MATERIALS
  • ASTM STP 549 : INFLUENCE STRESS LO-CYCLE FATIGUE OF STRUCTURAL MATERIALS
  • ASTM STP 550 : NONDESTRUCTIVE RAPID INDENTIFICATION OF METALS AND ALLOYS BY SPOT TEST (ONLY AVAILABLE IN ELECTRONIC FORMAT AT ASTM – SEND DIRECT)
  • ASTM STP 561 : FATIGUE AND DYNAMIC TESTING OF BITUMINOUS MIXTURES
  • ASTM STP 566 : HANDBOOK ON FATIGUE TESTING
  • ASTM STP 576 : GALVANIC AND PITTING CORROSION – FIELD AND LABORATORY STUDIES
  • ASTM STP 577 : CALCULATION OF PHYSICAL PROPERTIES OF PETROLEUM PRODUCTS FROM GAS CHROMATOGRAPIC ANALYSIS
  • ASTM STP 585 : ATMOSPHERIC CORROSION INVESTIGATION OF ALUMINUM-COATED, ZINC-COATED, AND COPPER-BEARING STEEL WIRE AND WIRE PRODUCTS
  • ASTM STP 587 : METRIC MECHANICAL FASTENERS
  • ASTM STP 588 : MANUAL ON STATISTICAL PLANNING AND ANALYSIS FOR FATIGUE EXPERIMENTS
  • ASTM STP 590 : MECHANICS OF CRACK GROWTH
  • ASTM STP 593 : FRACTURE MECHANICS OF COMPOSITES
  • ASTM STP 60 : PAPER AND PAPERBOARD CHARACTERISTICS, NOMENCLATURE, AND SIGNIFICANCE OF TESTS, OCTOBER, 1944. SPONSORED BY ASTM COMMITTEE D-6 ON PAPER AND PAPER PRODUCTS
  • ASTM STP 60-A : PAPER AND PAPERBOARD; CHARACTERISTICS, NOMENCLATURE, AND SIGNIFICANCE OF TESTS
  • ASTM STP 608 : RECENT DEVELOPMENTS IN MECHANICAL TESTING
  • ASTM STP 615 : SELECTION AND USE OF WEAR TESTS FOR METALS
  • ASTM STP 627 : FAST FRACTURE AND CRACK ARREST
  • ASTM STP 634 : AQUATIC TOXICOLOGY AND HAZARD EVALUATION
  • ASTM STP 636 : FATIGUE OF FILAMENTARY COMPOSITE MATERIALS
  • ASTM STP 639 : MANUAL ON ZIRCONIUM AND HAFNIUM
  • ASTM STP 645 : FRACTOGRAPHY IN FAILURE ANALYSIS (OUT OF PRINT) *** SEND CUSTOMER DIRECT FOR ELECTRONIC COPY ***
  • ASTM STP 649 : WALKWAY SURFACES: MEASUREMENT OF SLIP RESISTANCE
  • ASTM STP 654 : DYNAMIC GEOTECHNICAL TESTING
  • ASTM STP 656 : INTERGRANULAR CORROSION OF STAINLESS ALLOYS
  • ASTM STP 665 : STRESS CORROSION CRACKING: THE SLOW STRAIN-RATE TECHNIQUE
  • ASTM STP 676 : STRESS RELAXATION TESTING
  • ASTM STP 677 : FRACTURE MECHANICS: PROCEEDINGS OF THE ELEVENTH NATIONAL SYMPOSIUMON FRACTURE MECHANICS: PART I
  • ASTM STP 678 : FRACTURE MECHANICS APPLIED TO BRITTLE MATERIALS
  • ASTM STP 684 : CORROSION AND DEGRADATION OF IMPLANT MATERIALS
  • ASTM STP 685 : SYMPOSIUM ON DESIGN FOR FIRE SAFETY
  • ASTM F 523 : STANDARD PRACTICE FOR UNAIDED VISUAL INSPECTION OF POLISHED SILICON WAFER SURFACES
  • ASTM F 524 : MEASURING BEAM DIVERGENCE OF PULSED LASERS BY THE
  • ASTM F 525 : STANDARD TEST METHOD FOR MEASURING RESISTIVITY OF SILICON WAGERS USING A SPREADING RESISTANCE PROBE
  • ASTM F 526 : STANDARD TEST METHOD FOR MEASURING DOSE FOR USE IN LINEAR ACCELERATOR PULSED RADIATION EFFECTS TESTS
  • ASTM F 527 : PRACTICE FOR ADJUSTING PHOTORESIST EXPOSURE TIME
  • ASTM F 528 : STANDARD TEST METHOD OF MEASUREMENT OF COMMON-EMITTER DC CURRENT GAIN OF JUNCTION TRANSISTORS
  • ASTM F 528M : MEASUREMENT OF COMMON-EMITTER D-C CURRENT GAIN OF JUNCTION TRANSISTORS [METRIC]
  • ASTM F 529 : INTERPRETATION OF INTERFEROGRAMS OF NOMINALLY PLANE WAVEFRONTS
  • ASTM F 53 : MEASUREMENT OF SUBLIMATION FROM THERMIONIC EMITTER
  • ASTM F 530 : WAVEFRONT DISTORTION OF LASER RODS
  • ASTM F 531 : WAVEFRONT DISTORTION AND FACE PARALLELISM OF LASER DISKS
  • ASTM F 532 : WIDTH OF DEFECTS IN OPTICAL SURFACES, USING NOMARSKI DIFFERENTIAL MICROSCOPY
  • ASTM F 533 : STANDARD TEST METHOD FOR THICKNESS AND THICKNESS VARIATION OF SILICON WAFERS
  • ASTM F 534 : STANDARD TEST METHOD FOR BOW OF SILICON WAFERS
  • ASTM F 535 : ELECTRICAL PERFORMANCE CHARACTERISTICS OF VACUUM C
  • ASTM F 536 : STANDARD TEST METHOD FOR SIZE OF RESILIENT FLOOR TILE BY DIAL GAGEMETHOD
  • ASTM F 537 : STANDARD SPECIFICATION FOR DESIGN, FABRICATION, AND INSTALLATION OF FENCES CONSTRUCTED OF WOOD AND RELATED MATERIALS
  • ASTM F 538 : STANDARD TERMINOLOGY RELATING TO THE CHARACTERISTICS AND PERFORMANCE OF TIRES
  • ASTM F 539 : STANDARD PRACTICE FOR FITTING ATHLETIC FOOTWEAR
  • ASTM F 54 : DETERMINING MULTIPLE PHOTOMASK REGISTRATION
  • ASTM F 540 : STANDARD TEST METHOD FOR SQUARENESS OF RESILIENT FLOOR TILE BY DIAL GAGE METHOD
  • ASTM F 541 : STANDARD SPECIFICATION FOR ALLOY STEEL EYEBOLTS
  • ASTM F 542 : STANDARD TEST METHOD FOR EXOTHERMIC TEMPERATURE OF ENCAPSULATING COMPOUNDS FOR ELECTRONIC AND MICROELECTRONIC ENCAPSULATION
  • ASTM F 543 : STANDARD SPECIFICATION AND TEST METHODS FOR METALLIC MEDICAL BONE SCREWS
  • ASTM F 544 : PICTORIAL CORTICAL BONE SCREW CLASSIFICATION
  • ASTM F 545 : PVC AND ABS INJECTED SOLVENT CEMENTED PLASTIC PIPE JOINTS
  • ASTM F 546 : PERFLUORO (ETHYLENE-PROPYLENE) COPOLYMER (FEP) PLASTIC-LINED FERROUS METAL PIPE AND FITTINGS
  • ASTM F 547 : STANDARD TERMINOLOGY OF NAILS FOR USE WITH WOOD AND WOOD-BASE MATERIALS
  • ASTM F 548 : STANDARD TEST METHOD FOR INTENSITY OF SCRATCHES ON AEROSPACE TRANSPARENT PLASTICS
  • ASTM F 549 : STANDARD TERMINOLOGY RELATING TO CARBONLESS COPY PRODUCTS
  • ASTM F 55 : STAINLESS STEEL BAR & WIRE FOR SURGICAL IMPLANTS
  • ASTM F 550 : STANDARD TEST METHOD FOR LITHOGRAPHIC PROPERTIES OF IMAGING MATERIAL
  • ASTM F 551 : STANDARD PRACTICE FOR USING A 67.23-IN. (1.707-M) DIAMETER LABORATORY TEST ROADWHEEL IN TESTING TIRES
  • ASTM F 552 : STANDARD TERMINOLOGY RELATING TO CHAIN LINK FENCING
  • ASTM F 553 : TEST METHOD FOR CARBON PAPER AND CARBON FILM DURABILITY
  • ASTM F 554 : WET CORNERING TRACTION OF TIRES USING OVER-THE-ROA
  • ASTM F 555 : STANDARD TEST METHOD FOR MOTOR LIFE EVALUATION OF AN UPRIGHT VACUUM CLEANER
  • ASTM F 556 : STANDARD TEST METHOD FOR CURL OF CARBONLESS COPY PAPERS
  • ASTM F 557 : “RELATIVE WORK” FOR STRAIGHT-LINE MOVEMENT OF CLEA
  • ASTM F 558 : STANDARD TEST METHOD FOR MEASURING AIR PERFORMANCE CHARACTERISTICSOF VACUUM CLEANERS
  • ASTM F 559 : STANDARD TEST METHOD FOR MEASURING LENGTH OF ROAD TEST COURSES USING A FIFTH WHEEL
  • ASTM F 56 : STAINLESS STEEL SHEET AND STRIP FOR SURGICAL IMPLA
  • ASTM F 560 : STANDARD SPECIFICATION FOR UNALLOYED TANTALUM FOR SURGICAL IMPLANT APPLICATIONS (UNS R05200, UNS R05400)
  • ASTM F 561 : STANDARD PRACTICE FOR RETRIEVAL AND ANALYSIS OF MEDICAL DEVICES, AND ASSOCIATED TISSUES AND FLUIDS
  • ASTM F 562 : STANDARD SPECIFICATION FOR WROUGHT 35COBALT-35NICKEL-20CHROMIUM- 10MOLYBDENUM ALLOY FOR SURGICAL IMPLANT APPLICATIONS (UNS R30035)
  • ASTM F 563 : STANDARD SPECIFICATION FOR WROUGHT COBALT-20NICKEL-20CHROMIUM-3.5 MOLYBDENUM-3.5TUNGSTEN-5IRON ALLOY FOR SURGICAL IMPLANT APPLICATIONS (UNS R30563)
  • ASTM F 564 : STANDARD SPECIFICATION AND TEST METHODS FOR METALLIC BONE STAPLES
  • ASTM F 565 : STANDARD PRACTICE FOR CARE AND HANDLING OF ORTHOPEDIC IMPLANTS ANDINSTRUMENTS
  • ASTM F 567 : STANDARD PRACTICE FOR PRACTICE FOR INSTALLATION OF CHAIN-LINK FENCE
  • ASTM F 568 : STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL EXTERNALLY THREADED METRIC FASTENERS
  • ASTM F 568M : STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL EXTERNALLY THREADED METRIC FASTENERS
  • ASTM F 569 : FILTERABILITY INDEX OF REAGENT-GRADE WATER AND HIG
  • ASTM F 57 : CONCENTRATING AND MEASURING TRACE QUANTITIES OF
  • ASTM F 570 : TRANSISTOR COLLECTOR-EMITTER SATURATION VOLTAGE
  • ASTM F 571 : STANDARD PRACTICE FOR INSTALLATION OF EXIT DEVICES IN SECURITY AREAS
  • ASTM F 572 : APPLICATION OF FILM SECURITY CAMERAS IN FINANCIAL INSTITUTIONS
  • ASTM F 573 : RESIDENTIAL ZINC-COATED STEEL CHAIN-LINK FENCE FABRIC
  • ASTM F 574 : EVALUATION OF POLYSILICON
  • ASTM F 575 : PARTICLE CONCENTRATION IN LIQUIDS
  • ASTM F 576 : STANDARD TEST METHOD FOR MEASUREMENT OF INSULATOR THICKNESS AND REFRACTIVE INDEX ON SILICON SUBSTRATES BY ELLIPSOMETRY
  • ASTM F 577 : STANDARD TEST METHOD FOR PARTICLE SIZE MEASUREMENT OF DRY TONERS
  • ASTM F 578 : LASTING THRESHOLD AND SLOPE EFFICIENCY OF NEODYMIUM-DOPED LASER RODS
  • ASTM F 579 : FACE FLATNESS BY OPTICAL NON – CONTACT TECHNIQUE
  • ASTM F 58 : MEASURING SPECIFIC RESISTIVITY OF ELECTRONIC GRADE SOLVENTS
  • ASTM F 580 : ADHESION STRENGTH OF BONDABLE FILMS TO SUBSTRATES IN RIBBON-WIRE BONDS
  • ASTM F 581 : ACCELERATED AGING OF PHOTORESIST
  • ASTM F 582 : PREPARATION OF PHOTORESIST FOR ANALYSIS OF INORGANIC CONTAMINANTS
  • ASTM F 583 : PHOTORESIST CLEANNESS-FILTERABILITY
  • ASTM F 584 : STANDARD PRACTICE FOR VISUAL INSPECTION OF SEMICONDUCTOR LEAD-BONDING WIRE
  • ASTM F 585 : STANDARD PRACTICE FOR INSERTION OF FLEXIBLE POLYETHYLENE PIPE INTO EXISTING SEWERS
  • ASTM F 586 : LEAK RATES VERSUS Y STRESSES AND M FACTORS FOR GASKETS
  • ASTM F 587 : SAMPLING GROUND MEAT IN BLENDERS
  • ASTM F 588 : STANDARD TEST METHODS FOR MEASURING THE FORCED ENTRY RESISTANCE OFWINDOW ASSEMBLIES, EXCLUDING GLAZING IMPACT
  • ASTM F 589 : STANDARD CONSUMER SAFETY SPECIFICATION FOR NON-POWDER GUNS
  • ASTM F 59 : IDENTIFICATION OF METAL PARTICAL CONTAMINATION
  • ASTM F 590 : STANDARD CONSUMER SAFETY SPECIFICATION FOR NON-POWDER GUN PROJECTILES AND PROPELLANTS
  • ASTM F 5906 : STANDARD GUIDE FOR MEASURING HORIZONTAL POSITIONING DURING MEASUREMENTS OF SURFACE WATER DEPTHS
  • ASTM F 591 : USING THE COMPUTER IMPACT PRINT-OUT UNIT AS A TEST
  • ASTM F 592 : STANDARD TERMINOLOGY OF COLLATED AND COHERED FASTENERS AND THEIR APPLICATION TOOLS
  • ASTM F 593 : STANDARD SPECIFICATION FOR STAINLESS STEEL BOLTS, HEX CAP SCREWS, AND STUDS
  • ASTM F 594 : STANDARD SPECIFICATION FOR STAINLESS STEEL NUTS
  • ASTM F 595 : STANDARD TEST METHODS FOR VACUUM CLEANER HOSE – DURABILITY AND RELIABILITY (ALL-PLASTIC HOSE)
  • ASTM F 596 : STANDARD PRACTICE FOR COMPARATIVE EVALUATION OF THE IMAGING PROPERTIES OF DRY ELECTROSTATIC TONERS
  • ASTM F 597 : STANDARD PRACTICE FOR EVALUATION OF ONE-TIME CARBON PAPER IN CARBON-INTERLEAVED BUSINESS FORMS BY USE OF AN ELECTRIC TYPEWRITER
  • ASTM F 598 : STANDARD PRACTICE FOR DETERMINING THE RESISTANCE OF CARBONLESS PAPERS TO CAPSULAR DAMAGE
  • ASTM F 599 : POLY(VINYLIDENE CHLORIDE) (PVDC) PLASTIC-LINED FERROUS METAL PIPE AND FITTINGS
  • ASTM F 6 : BULK DENSITY OF GERMANIUM DIOXIDE
  • ASTM F 60 : DETECTION AND ESTIMATION OF MICROBIOLOGICAL CONTAMINANTS IN WATER USED FOR PROCESSING ELECTRON AND MICROELECTRONIC DEVICES
  • ASTM F 600 : NONDESTRUCTIVE ULTRASONIC EVALUATION OF SOCKET AND
  • ASTM F 601 : STANDARD PRACTICE FOR FLUORESCENT PENETRANT INSPECTION OF METALLICSURGICAL IMPLANTS
  • ASTM F 602 : STANDARD CRITERIA FOR IMPLANTABLE THERMOSET EPOXY PLASTICS
  • ASTM F 603 : STANDARD SPECIFICATION FOR HIGH-PURITY DENSE ALUMINUM OXIDE FOR MEDICAL APPLICATION
  • ASTM F 604 : SILICONE ELASTOMERS USED IN MEDICAL APPLICATIONS
  • ASTM F 605 : STANDARD PRACTICE FOR DETERMINING COMPATIBILITY OF ONE-TIME CARBON PAPER WITH CARBONLESS COPY PAPERS WHEN INTERLEAVED INTO THESAME MANIFOLD SET
  • ASTM F 606 : STANDARD TEST METHODS FOR DETERMINING THE MECHANICAL PROPERTIES OFEXTERNALLY AND INTERNALLY THREADED FASTENERS, WASHERS, DIRECT TENSION INDICATORS, AND RIVETS
  • ASTM F 606M : STANDARD TEST METHODS FOR DETERMINING THE MECHANICAL PROPERTIES OFEXTERNALLY AND INTERNALLY THREADED FASTENERS, WASHERS, AND RIVETS [METRIC]
  • ASTM F 607 : STANDARD TEST METHOD FOR ADHESION OF GASKET MATERIALS TO METAL SURFACES
  • ASTM F 608 : STANDARD TEST METHOD FOR EVALUATION OF CARPET EMBEDDED DIRT REMOVAL EFFECTIVENESS OF HOUSEHOLD/COMMERCIAL VACUUM CLEANERS
  • ASTM F 609 : STANDARD TEST METHOD FOR USING A HORIZONTAL PULL SLIPMETER (HPS)
  • ASTM F 61 : PHOSPHATE IN ELECTRONIC GRADE HYDROGEN PEROXIDE
  • ASTM F 610 : ESTIMATING THE QUALITY OF MOLDED POLY(VINYL CHLORI
  • ASTM F 610/F 610M : STANDARD TEST METHOD FOR EVALUATING THE QUALITY OF MOLDED POLY (VINYL CHLORIDE) (PVC) PLASTIC PIPE FITTINGS BY THE HEAT REVERSIONTECHNIQUE
  • ASTM F 611 : WAVEFRONT DISTORTION OF NOMINALLY PLANE OPTICAL ELEMENTS DUE TO REFRACTIVE INDEX INHOMOGENEITY
  • ASTM F 612 : CLEANING SURFACES OF POLISHED SILICON SLICES
  • ASTM F 613 : MEASURING DIAMETER OF SEMICONDUCTOR WAFERS
  • ASTM F 614 : DISTORTION OF OPTICAL LENSES USED IN PHOTOMASK FABRICATION
  • ASTM F 615 : DETERMINING SAFE CURRENT PULSE OPERATINMG REGIONS
  • ASTM F 615M : STANDARD PRACTICE FOR DETERMINING SAFE CURRENT-PULSE OPERATING REGIONS FOR METALLIZATION ON SEMICONDUCTOR COMPONENTS (METRIC)
  • ASTM F 616 : TEST METHOD FOR MEASURING MOSFET DRAIN LEAKAGE CURRENT
  • ASTM F 616M : STANDARD TEST METHOD FOR MEASURING MOSFET DRAIN LEAKAGE CURRENT [METRIC]
  • ASTM F 617 : STANDARD TEST METHOD FOR MEASURING MOSFET LINEAR THRESHOLD VOLTAGE
  • ASTM F 617M : MEASURING MOSFET LINEAR THRESHOLD VOLTAGE [METRIC]
  • ASTM F 618 : MEASURING MOSFET SATURATED THRESHOLD VOLTAGE
  • ASTM F 619 : STANDARD PRACTICE FOR EXTRACTION OF MEDICAL PLASTICS
  • ASTM F 62 : TIN IN ELECTRONIC GRADE HYDROGEN PEROXIDE
  • ASTM F 620 : STANDARD SPECIFICATION FOR ALPHA PLUS BETA TITANIUM ALLOY FORGINGSFOR SURGICAL IMPLANTS
  • ASTM F 621 : STANDARD SPECIFICATION FOR STAINLESS STEEL FORGINGS FOR SURGICAL IMPLANTS
  • ASTM F 622 : STANDARD SPECIFICATION FOR PREFORMED CRANIOPLASTY PLATES THAT CAN BE ALTERED
  • ASTM F 623 : STANDARD PERFORMANCE SPECIFICATION FOR FOLEY CATHETER
  • ASTM F 624 : STANDARD GUIDE FOR EVALUATION OF THERMOPLASTIC POLYURETHANE SOLIDSAND SOLUTIONS FOR BIOMEDICAL APPLICATIONS
  • ASTM F 625 : STANDARD PRACTICE FOR CLASSIFYING WATER BODIES FOR SPILL CONTROL SYSTEMS
  • ASTM F 626 : STANDARD SPECIFICATION FOR FENCE FITTINGS
  • ASTM F 627 : STANDARD PRACTICE FOR TESTING FLAKE OF SINGLE-STRIKE FILM TYPEWRITER RIBBONS
  • ASTM F 628 : STANDARD SPECIFICATION FOR ACRYLONITRILE-BUTADIENE-STYRENE (ABS) SCHEDULE 40 PLASTIC DRAIN, WASTE, AND VENT PIPE WITH A CELLULAR CORE
  • ASTM F 629 : STANDARD PRACTICE FOR RADIOGRAPHY OF CAST METALLIC SURGICAL IMPLANTS
  • ASTM F 63 : ELECTRONIC GRADE SOLUBLE CELLULOSE NITRATE
  • ASTM F 631 : STANDARD GUIDE FOR COLLECTING SKIMMER PERFORMANCE DATA IN CONTROLLED ENVIRONMENTS
  • ASTM F 632 : MEASURING SMALL-SIGNAL COMMON EMITTER CURRENT GAIN OF TRANSISTORSAT HIGH FREQUENCIES
  • ASTM F 633 : USE OF THE HIGH-SPEED PRINTER AS A TEST INSTRUMENT
  • ASTM F 634 : MEASUREMENT OF THE COATING TRANSFER RESISTANCE OF
  • ASTM F 635 : SELECTION OF TESTS FOR MATERIAL PROPERTIES OF LIQUID THERMOSET ENCAPSULATING COMPOUNDS FOR ELECTRONIC AND MICROELECTRONIC ENCAPSULATION
  • ASTM F 636 : SELECTION OF TESTS FOR MATERIAL PROPERTIES OF TRANSFER MOLDING COMPOUNDS FOR ELECTRONIC AND MICROELECTRONIC ENCAPSULATION
  • ASTM F 637 : STANDARD SPECIFICATION FOR FORMAT, PHYSICAL PROPERTIES, AND TEST METHODS FOR 19 AND 35 MM TESTABLE TAPE CARRIER FOR PERIMETER TAPE CARRIER-BONDED SEMICONDUCTOR DEVICES
  • ASTM F 638 : STANDARD SPECIFICATION FOR FINE ALUMINUM – 1% MAGNESIUM WIRE FOR SEMICONDUCTOR LEAD-BONDING
  • ASTM F 639 : STANDARD SPECIFICATION FOR POLYETHYLENE PLASTICS FOR MEDICAL APPLICATIONS
  • ASTM F 640 : STANDARD TEST METHODS FOR DETERMINING RADIOPACITY FOR MEDICAL USE
  • ASTM F 641 : STANDARD SPECIFICATION FOR IMPLANTABLE EPOXY ELECTRONIC ENCAPSULANTS
  • ASTM F 642 : STAINLESS STEEL FLEXIBLE WIRE FOR SURGICAL FIXATIO
  • ASTM F 643 : WROUGHT COBALT-CHROMIUM ALLOY FLEXIBLE WIRE FOR SU
  • ASTM F 644 : WROUGHT COBALT-CHROMIUM ALLOY FLEXIBLE WIRE FOR SU
  • ASTM F 645 : STANDARD GUIDE FOR SELECTION, DESIGN AND INSTALLATION OF THERMOPLASTIC WATER-PRESSURE PIPING SYSTEMS
  • ASTM F 647 : STANDARD PRACTICE FOR EVALUATING AND SPECIFYING IMPLANTABLE SHUNT ASSEMBLIES FOR NEUROSURGICAL APPLICATION
  • ASTM F 648 : STANDARD SPECIFICATION FOR ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE POWDER AND FABRICATED FORM FOR SURGICAL IMPLANTS
  • ASTM F 649 : STANDARD PRACTICE FOR SECONDARY CALIBRATION OF AIRBORNE PARTICLE COUNTER USING COMPARISON PROCEDURES
  • ASTM F 65 : PRIMARY AMYL ACETATE (MIXED ISOMERS) FOR USE IN FA
  • ASTM F 650 : PRACTICE FOR DETERMINING RELATIVE BIAS OF TWO PARTICLE COUNTERS USING COMPARISON PROCEDURES
  • ASTM F 651 : PARTICLE COUNTER SINGLE-POINT CALIBRATION BY THE M
  • ASTM F 652 : MEASURING MICA STAMPINGS OR SUBSTITUTES USED IN ELECTRON DEVICES AND LAMPS
  • ASTM F 653 : STANDARD TEST METHOD FOR EVALUATION OF ELECTROSTATIC MAASTERS
  • ASTM F 654 : STANDARD SPECIFICATION FOR RESIDENTIAL CHAIN LINK GATES
  • ASTM F 655 : STANDARD SPECIFICATION FOR TEST CARPETS AND PADS FOR VACUUM CLEANER TESTING
  • ASTM F 656 : STANDARD SPECIFICATION FOR PRIMERS FOR USE IN SOLVENT CEMENT JOINTS OF POLY(VINYL CHLORIDE) (PVC) PLASTIC PIPE AND FITTINGS
  • ASTM F 657 : TEST METHOD FOR MEASURING WARP AND TOTAL THICKNESS VARIATION ON SILICON WAFERS BY NONCONTACT SCANNING
  • ASTM F 658 : STANDARD PRACTICE FOR CALIBRATION OF A LIQUID-BORNE PARTICLE COUNTER USING AND OPTICAL SYSTEM BASED UPON LIGHT EXTINCTION
  • ASTM F 659 : STANDARD SPECIFICATION FOR SKIER GOGGLES AND FACESHIELDS
  • ASTM F 66 : TESTING PHOTORESISTS USED IN MICROELECTRONIC FABRICATION
  • ASTM F 660 : STANDARD PRACTICE FOR COMPARING PARTICLE SIZE IN THE USE OF ALTERNATIVE TYPES OF PARTICLE COUNTERS
  • ASTM F 661 : PRACTICE FOR PARTICLE COUNT AND SIZE DISTRIBUTION MEASUREMENT IN BATCH SAMPLES FOR FILTER EVALUATION USING AN OPTICAL PARTICLE COUNTER
  • ASTM F 662 : TEST METHOD FOR MEASUREMENT OF PARTICLE COUNT AND SIZE DISTRIBUTION IN BATCH SAMPLES FOR FILTER EVALUATION USING AN ELECTRICAL RESISTANCE PARTICLE COUNTER
  • ASTM F 663 : MANUAL ANALYSIS OF INTERFEROMETRIC DATA BY LEAST -
  • ASTM F 664 : MANUAL ANALYSIS OF INTERFEROMETRIC DATA BY LEAST-SQUARES FITTING TO A SPHERICAL REFERENCE SURFACE AND FOR COMPUTER-AIDED ANALYSIS OF INTERFEROMETRIC DATA BY LEAST-SQUARES FITTING TO BOTH PLANE ANDSPHERICAL REFERENCE SURFACES
  • ASTM F 665 : STANDARD CLASSIFICATION FOR VINYL CHLORIDE PLASTICS USED IN BIOMEDICAL APPLICATION
  • ASTM F 666 : STAINLESS STEEL FLEXIBLE WIRE FOR SURGICAL FIXATIO
  • ASTM F 667 : STANDARD SPECIFICATION FOR LARGE DIAMETER CORRUGATED POLYETHYLENE PIPE AND FITTINGS
  • ASTM F 668 : STANDARD SPECIFICATION FOR POLYVINYL CHLORIDE (PVC) AND OTHER ORGANIC POLYMER-COATED STEEL CHAIN-LINK FENCE FABRIC
  • ASTM F 669 : SPECIFICATION FOR STRENGTH REQUIREMENTS OF METAL POSTS AND RAILS FOR INDUSTRIAL CHAIN LINK FENCE
  • ASTM F 67 : STANDARD SPECIFICATION FOR UNALLOYED TITANIUM, FOR SURGICAL IMPLANT APPLICATIONS (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
  • ASTM F 670 : STANDARD SPECIFICATION FOR TANKS, 5 AND 10 GALLON (20 AND 40-L) LUBE OIL DESPENSING
  • ASTM F 671 : STANDARD TEST METHOD FOR MEASURING FLAT LENGTH ON WAFERS OF SILICON AND OTHER ELECTRONIC MATERIALS
  • ASTM F 672 : STANDARD TEST METHOD FOR MEASURING RESISTIVITY PROFILES PERPENDICULAR TO THE SURFACE OF A SILICON WAFER USING A SPREADING RESISTANCE PROBE
  • ASTM F 673 : TEST METHODS FOR MEASURING RESISTIVITY OF SEMICONDUCTOR SLICES OR SHEET RESISTANCE OF SEMICONDUCTOR FILMS WITH A NONCONTACT EDDY- CURRENT GAGE
  • ASTM F 674 : PRACTICE FOR PREPARING SILICON FOR SPREADING RESISTANCE MEASUREMENTS
  • ASTM F 675 : MEASURING NONEQUILIBRIUM TRANSIENT PHOTOCURRENTS IN P-N JUNCTIONS
  • ASTM F 676 : STANDARD TEST METHOD FOR MEASURING UNSATURATED TTL SINK CURRENT
  • ASTM F 677 : STANDARD TEST METHOD FOR FLUID AND GREASE RESISTANCE OF THERMOSET ENCAPSULATING COMPOUNDS USED IN ELECTRONIC AND MICROELECTRONIC APPLICATIONS
  • ASTM F 678 : POLYETHYLENE GAS PRESSURE PIPE, TUBING, AND FITTIN
  • ASTM F 679 : STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) LARGE-DIAMETER PLASTIC GRAVITY SEWER PIPE AND FITTINGS
  • ASTM F 68 : STANDARD SPECIFICATION FOR OXYGEN-FREE COPPER IN WROUGHT FORMS FORELECTRON DEVICES
  • ASTM F 680 : STANDARD TEST METHODS FOR NAILS
  • ASTM F 681 : STANDARD PRACTICE FOR USE OF BRANCH CONNECTIONS
  • ASTM F 682 : STANDARD SPECIFICATION FOR WROUGHT CARBON STEEL SLEEVE-TYPE PIPE COUPLINGS
  • ASTM F 683 : STANDARD PRACTICE FOR SELECTION AND APPLICATION OF THERMAL INSULATION FOR PIPING AND MACHINERY
  • ASTM F 685 : STANDARD PRACTICE FOR DETERMINING TONER USAGE, EFFICIENCY, AND DUSTING NONHEAT FIXING COPIERS USING SINGLE-COMPONENT TONER SYSTEMS
  • ASTM F 686 : STANDARD PRACTICE FOR EVALUATION OF IMAGE QUALITY PRODUCED BY CARBONLESS COPY PAPER WITH AN ELECTRIC OR ELECTRONIC TYPEWRITER
  • ASTM F 687 : ON-SITE CALIBRATION OF LIQUIDBORNE AUTOMATIC PARTI
  • ASTM F 688 : STANDARD SPECIFICATION FOR WROUGHT COBALT-35 NICKEL-20 CHROMIUM-10MOLYBDENUM ALLOY PLATE, SHEET, AND FOIL FOR SURGICAL IMPLANTS (UNS R30035)
  • ASTM F 689 : STANDARD PRACTICE FOR DETERMINATION OF THE TEMPERATURE OF ABOVE-GROUND PLASTIC GAS PRESSURE PIPE WITHIN METALLIC CASINGS
  • ASTM F 69 : DIETHYL OXALATE FOR USE IN FABRICATING ELECTRON DE
  • ASTM F 690 : STANDARD PRACTICE FOR UNDERGROUND INSTALLATION OF THERMOPLASTIC PRESSURE PIPING IRRIGATION SYSTEMS
  • ASTM F 691 : PREPARING PHOTOPLATES FOR MEASURING FLATNESS DEVIATIONS
  • ASTM F 692 : STANDARD TEST METHOD FOR MEASURING ADHESION STRENGTH OF SOLDERABLEFILMS TO SUBSTRATES
  • ASTM F 693 : STANDARD PRACTICE FOR SEALING SEAMS OF RESILIENT SHEET FLOORING PRODUCTS BY USE OF LIQUID SEAM SEALERS
  • ASTM F 694 : STANDARD TEST METHOD FOR HEEL-ATTACHING STRENGTH OF WOMEN’S SHOES
  • ASTM F 695 : STANDARD PRACTICE FOR RANKING OF TEST DATA OBTAINED FOR MEASUREMENT OF SLIP RESISTANCE OF FOOTWEAR SOLE, HEEL, AND RELATEDMATERIALS
  • ASTM F 696 : STANDARD SPECIFICATION FOR LEATHER PROTECTORS FOR RUBBER INSULATING GLOVES AND MITTENS
  • ASTM F 697 : STANDARD PRACTICE FOR CARE AND USE OF ATHLETIC MOUTH PROTECTORS
  • ASTM F 698 : STANDARD SPECIFICATION FOR PHYSICAL INFORMATION TO BE PROVIDED FORAMUSEMENT RIDES AND DEVICES
  • ASTM F 699 : STANDARD PRACTICE FOR ACCELERATED CONDITIONING OF POLYBUTYLENE PIPE AND TUBING FOR SUBSEQUENT QUALITY CONTROL TESTING
  • ASTM F 7 : STANDARD SPECIFICATION FOR ALUMINUM OXIDE POWDER
  • ASTM F 70 : CATHODE CARBONATES
  • ASTM F 700 : STANDARD PRACTICE FOR CARE AND HANDLING OF INTRACRANIAL ANEURYSM CLIPS AND INSTRUMENTS
  • ASTM F 701 : STANDARD PRACTICE FOR CARE AND HANDLING OF NEUROSURGICAL IMPLANTS AND INSTRUMENTS
  • ASTM F 702 : STANDARD SPECIFICATION FOR POLYSULFONE RESIN FOR MEDICAL APPLICATIONS
  • ASTM F 703 : STANDARD SPECIFICATION FOR IMPLANTABLE BREAST PROSTHESES
  • ASTM F 704 : STANDARD PRACTICE FOR SELECTING BOLTING LENGTHS FOR PIPING SYSTEM FLANGED JOINTS
  • ASTM F 706 : STANDARD PRACTICE FOR DETERMINATION OF FUSION TEMPERATURE OF DRY ELECTROSTATIC HEAT-FIXING TONERS
  • ASTM F 707 : MODULAR GAGE BOARDS
  • ASTM F 707/F 707M : STANDARD SPECIFICATION FOR MODULAR GAGE BOARDS
  • ASTM F 708 : STANDARD PRACTICE FOR DESIGN AND INSTALLATION OF RIGID PIPE HANGERS
  • ASTM F 709 : GASKET – ASBESTOS METALLIC CLOTH MATERIAL
  • ASTM F 71 : STANDARD PRACTICE FOR USING THE MORPHOLOGICAL KEY FOR THE RAPID INDENTIFICATION OF FIBERS FOR CONTAMINATION CONTROL IN ELECTRON DEVICES AND MICROELECTRONICS
  • ASTM F 710 : STANDARD PRACTICE FOR PREPARING CONCRETE FLOORS TO RECEIVE RESILIENT FLOORING
  • ASTM F 711 : STANDARD SPECIFICATION FOR FIBERGLASS-REINFORCED PLASTIC (FRP) RODAND TUBE USED IN LIVE LINE TOOLS
  • ASTM F 712 : STANDARD TEST METHODS AND SPECIFICATIONS FOR ELECTRICALLY INSULATING PLASTIC GUARD EQUIPMENT FOR PROTECTION OF WORKERS
  • ASTM F 714 : STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE (SDR-PR)BASED ON OUTSIDE DIAMETER
  • ASTM F 715 : STANDARD TEST METHODS FOR COATED FABRICS USED FOR OIL SPILL CONTROL AND STORAGE
  • ASTM F 716 : STANDARD TEST METHODS FOR SORBENT PERFORMANCE OF ABSORBENTS
  • ASTM F 717 : STANDARD SPECIFICATION FOR FOOTBALL HELMETS
  • ASTM F 718 : STANDARD FOR SHIPBUILDERS AND MARINE PAINTS AND COATINGS PRODUCT/PROCEDURE DATA SHEET
  • ASTM F 719 : STANDARD PRACTICE FOR TESTING BIOMATERIALS IN RABBITS FOR PRIMARY SKIN IRRITATION
  • ASTM F 72 : STANDARD SPECIFICATION FOR GOLD WIRE FOR SEMICONDUCTOR LEAD BONDING
  • ASTM F 720 : STANDARD PRACTICE FOR TESTING GUINEA PIGS FOR CONTACT ALLERGENS: GUINEA PIG MAXIMIZATION TEST
  • ASTM F 721 : STANDARD SPECIFICATION FOR GAGE PIPING ASSEMBLIES
  • ASTM F 722 : STANDARD SPECIFICATION FOR WELDED JOINTS FOR SHIPBOARD PIPING SYSTEMS
  • ASTM F 723 : STANDARD PRACTICE FOR CONVERSION BETWEEN RESISTIVITY AND DOPANT DENSITY FOR BORON-DOPED, PHOSPHORUS-DOPED, AND ARSENIC-DOPED SILICON
  • ASTM F 724 : STANDARD TEST METHOD FOR OUTDOOR EVALUATION OF TIRE SIDEWALL COMPONENT CRACKING RESISTANCE
  • ASTM F 725 : STANDARD PRACTICE FOR DRAFTING IMPACT TEST REQUIREMENTS IN THERMOPLASTIC PIPE AND FITTINGS STANDARDS
  • ASTM F 726 : STANDARD TEST METHOD FOR SORBENT PERFORMANCE OF ABSORBENTS
  • ASTM F 727 : MEASUREMENT OF TRANSMITTANCE OF SEE-THROUGH PHOTOPLATE
  • ASTM F 728 : STANDARD PRACTICE FOR PREPARING AN OPTICAL MICROSCOPE FOR DIMENSIONAL MEASUREMENTS
  • ASTM F 729 : STANDARD TEST METHODS FOR TEMPERATURE COEFFICIENT OF RESISTANCE OFFILM RESISTORS
  • ASTM F 73 : STANDARD SPECIFICATION FOR TUNGSTEN-RHENIUM ALLOY WIRE FOR ELECTRON DEVICES AND LAMPS
  • ASTM F 730 : HERMETICITY OF ELECTRON DEVICES BY A WEIGHT-GAIN TEST
  • ASTM F 732 : STANDARD TEST METHOD FOR WEAR TESTING OF POLYMERIC MATERIALS USED IN TOTAL JOINT PROSTHESES
  • ASTM F 733 : STANDARD PRACTICE FOR OPTICAL DISTORTION AND DEVIATION OF TRANSPARENT PARTS USING THE DOUBLE-EXPOSURE METHOD
  • ASTM F 734 : STANDARD TEST METHOD FOR SHEAR STRENGTH OF FUSION BONDED POLYCARBONATE AEROSPACE GLAZING MATERIAL
  • ASTM F 735 : STANDARD TEST METHOD FOR ABRASION RESISTANCE OF TRANSPARENT PLASTICS AND COATINGS USING THE OSCILLATING SAND METHOD
  • ASTM F 736 : STANDARD TEST METHOD FOR IMPACT RESISTANCE OF MONOLITHIC POLYCARBONATE SHEET BY MEANS OF A FALLING WEIGHT
  • ASTM F 737 : STANDARD PERFORMANCE SPECIFICATION FOR ICE HOCKEY SKATE BLADES
  • ASTM F 738 : STAINLESS STEEL METRIC BOLTS, SCREWS, AND STUDS
  • ASTM F 738M : STANDARD SPECIFICATION FOR STAINLESS STEEL METRIC BOLTS, SCREWS, AND STUDS
  • ASTM F 739 : STANDARD TEST METHOD FOR PERMEATION OF LIQUIDS AND GASES THROUGH PROTECTIVE CLOTHING MATERIALS UNDER CONDITIONS OF CONTINUOUS CONTACT
  • ASTM F 74 : DETERMINING HYDROLYTIC STABILITY OF PLASTIC ENCAPS
  • ASTM F 740 : FILTRATION
  • ASTM F 741 : DETERMINING THE CRYSTALLOGRAPHIC AXES AND CONTRAST RATION OF A POCKELS CELL ELECTRO-OPTIC CRYSTAL OPERATING IN THE LONGITUDINAL MODE
  • ASTM F 742 : EVALUATING AN INTERFEROMETER
  • ASTM F 743 : MEASURING CONTRAST RATIO OF A PAIR OF LINEAR POLAR
  • ASTM F 744 : TEST METHOD FOR MEASURING DOSE RATE THRESHOLD FOR UPSET OF DIGITAL INTEGRATED CIRCUITS
  • ASTM F 744M : STANDARD TEST METHOD FOR MEASURING DOSE RATE THRESHOLD FOR UPSET OF DIGITAL INTEGRATED CIRCUITS [METRIC]
  • ASTM F 745 : STANDARD SPECIFICATION FOR 18CHROMIUM-12.5NICKEL-2.5MOLYBDENUM STAINLESS STEEL FOR CAST AND SOLUTION-ANNEALED SURGICAL IMPLANT APPLICATIONS
  • ASTM F 746 : STANDARD TEST METHOD FOR PITTING OR CREVICE CORROSION OF METALLIC SURGICAL IMPLANT MATERIALS
  • ASTM F 747 : STANDARD TERMINOLOGY RELATING TO AMUSEMENT RIDES AND DEVICES
  • ASTM F 748 : STANDARD PRACTICE FOR SELECTING GENERIC BIOLOGICAL TEST METHODS FOR MATERIALS AND DEVICES
  • ASTM F 749 : STANDARD PRACTICE FOR EVALUATING MATERIAL EXTRACTS BY INTRACUTANEOUS INJECTION IN THE RABBIT
  • ASTM F 75 : STANDARD SPECIFICATION FOR COBALT-28 CHROMIUM-6 MOLYBDENUM ALLOY CASTINGS AND CASTING ALLOY FOR SURGICAL IMPLANTS (UNS R30075)
  • ASTM F 750 : STANDARD PRACTICE FOR EVALUATING MATERIAL EXTRACTS BY SYSTEMIC INJECTION IN THE MOUSE
  • ASTM F 751 : MEASURING PARTICLE SIZE OF WIDE-SIZE RANGE DRY TONERS
  • ASTM F 752 : EFFECTIVE SERIES RESISTANCE (ESR) AND CAPACITANCE
  • ASTM F 753 : STANDARD CLASSIFICATION OF BRASSIERES
  • ASTM F 754 : STANDARD SPECIFICATION FOR IMPLANTABLE POLYTETRAFLUOROETHYLENE (PTFE) POLYMER FABRICATED IN SHEET, TUBE, AND ROD SHAPES
  • ASTM F 755 : STANDARD SPECIFICATION FOR SELECTION OF POROUS POLYETHYLENE FOR USE IN SURGICAL IMPLANTS
  • ASTM F 756 : STANDARD PRACTICE FOR ASSESSMENT OF HEOLYTIC PROPERTIES OF MATERIALS
  • ASTM F 757 : STANDARD TEST METHOD FOR DETERMINING ENERGY CONSUMPTION OF COPIER AND COPIER-DUPLICATING EQUIPMENT
  • ASTM F 758 : STANDARD SPECIFICATION FOR SMOOTH-WALL POLY(VINYL CHLORIDE) (PVC) PLASTIC UNDERDRAIN SYSTEMS FOR HIGHWAY, AIRPORT, AND SIMILAR DRAINDRAINAGE
  • ASTM F 759 : SPECIFICATION FOR HOT CHOCOLATE BEVERAGE DISPENSERS
  • ASTM F 76 : STANDARD TEST METHODS FOR MEASURING RESISTIVITY AND HALL COEFFICIENT AND DETERMINING HALL MOBILITY IN SINGLE-CRYSTAL SEMICONDUCTORS
  • ASTM F 760 : STANDARD SPECIFICATION FOR FOOD SERVICE EQUIPMENT MANUALS
  • ASTM F 761 : STANDARD SPECIFICATION FOR STENGTH REQUIREMENTS OF TUBULAR STEEL POSTS AND RAILS FOR RESIDENTIAL CHAIN-LINK FENCE
  • ASTM F 762 : STANDARD TEST METHOD FOR DETERMINING CHANGE IN GROOVE (OR VOID) DEPTH WITH DISTANCE TRAVELED FOR PASSENGER CAR TIRES
  • ASTM F 763 : STANDARD PRACTICE FOR SHORT-TERM SCREENING OF IMPLANT MATERIALS
  • ASTM F 764 : COMPATIBILITY OF MATERIALS WITH HIGH-ENERGY PROPELLANTS (IMPACT SENSITIVITY THRESHOLD TECHNIQUES)
  • ASTM F 765 : WILDCATS, SHIP ANCHOR CHAIN
  • ASTM F 766 : STANDARD TEST METHOD FOR MELTING POINT OF WAXES
  • ASTM F 767 : STANDARD TEST METHOD FOR IMAGE STABILITY OF CHEMICAL CARBONLESS PAPER TO LIGHT
  • ASTM F 768 : SPECULAR REFLECTANCE AND TRANSMITTANCE MEASUREMENT
  • ASTM F 769 : STANDARD TEST METHOD FOR MEASURING TRANSISTOR AND DIODE LEAKAGE CURRENTS
  • ASTM F 769M : MEASURING TRANSISTOR AND DIODE LEAKAGE CURRENTS [METRIC]
  • ASTM F 77 : STANDARD TEST METHOD FOR APPARENT DENSITY OF CERAMICS FOR ELECTRONDEVICE AND SEMICONDUCTOR APPLICATION
  • ASTM F 770 : STANDARD PRACTICE FOR OWNERSHIP AND OPERATION OF AMUSEMENT RIDES AND DEVICES
  • ASTM F 771 : STANDARD SPECIFICATION FOR POLYETHYLENE (PE) THERMOPLASTIC HIGH-PRESSURE IRRIGATION PIPELINE SYSTEMS
  • ASTM F 772 : NOISE QUALITY OF FILM-TYPE RESISTORS
  • ASTM F 773 : PRACTICE FOR MEASURING DOSE RATE RESPONSE OF LINEAR INTEGRATED CIRCUITS
  • ASTM F 773M : STANDARD PRACTICE FOR MEASURING DOSE RATE RESPONSE OF LINEAR INTEGRATED CIRCUITS [METRIC]
  • ASTM F 774 : ANALYSIS OF LATCHUP SUSCEPTIBILITY IN BIPOLAR INTE
  • ASTM F 775 : WAFER AND SLICE FLATNESS BY INTERFEROMETRIC, NONCONTACT TECHNIQUE
  • ASTM F 776 : RESISTANCE OF MATERIALS TO HORIZONTAL FLAME PROPAG
  • ASTM F 777 : RESISTANCE OF ELECTRICAL WIRE INSULATION MATERIALS TO FLAME AT 60 DEGREE
  • ASTM F 778 : STANDARD METHODS FOR GAS FLOW RESISTANCE TESTING OF FILTRATION MEDIA
  • ASTM F 779 : STANDARD TEST METHOD FOR TORSION CHARACTERISTIC OF ALPINE SKIS
  • ASTM F 78 : STANDARD TEST METHOD FOR CALIBRATION OF HELIUM LEAK DETECTORS BY USE OF SECONDARY STANDARDS
  • ASTM F 780 : STANDARD TEST METHOD FOR LINEAR DEFORMATION AND BREAKING STRENGTH OF ALPINE SKIS
  • ASTM F 781 : PERFLUORO (ALKOXYALKANE) COPOLYMER (PFA) PLASTIC-LINED FERROUS METAL PIPE AND FITTINGS
  • ASTM F 782 : STANDARD SPECIFICATION FOR DOORS, FURNITURE, MARINE
  • ASTM F 783 : STANDARD SPECIFICATION FOR STAPLE, HANDGRAB, HANDLE, AND STIRRUP RUNG
  • ASTM F 784 : CALIBRATING RADIOISOTOPE HERMETRIC TEST APPARATUS
  • ASTM F 785 : TEST METHOD FOR HERMETICITY OF SEALED DEVICES BY A RADIOISOTOPE TEST
  • ASTM F 786 : METALLIC BONE PLATES
  • ASTM F 787 : METALLIC NAIL-PLATE APPLIANCES
  • ASTM F 788 : SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUD
  • ASTM F 788/F 788M : STANDARD SPECIFICATION FOR SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS, INCH AND METRIC SERIES
  • ASTM F 789 : TYPE PS-46 POLY(VINYL CHLORIDE) (PVC) PLASTIC GRAVITY FLOW SEWER PIPE AND FITTINGS
  • ASTM F 79 : STANDARD SPECIFICATION FOR TYPE 101 SEALING GLASS
  • ASTM F 790 : STANDARD GUIDE FOR TESTING MATERIALS FOR AEROSPACE PLASTIC TRANSPARENT ENCLOSURES
  • ASTM F 791 : STANDARD TEST METHOD FOR STRESS CRAZING OF TRANSPARENT PLASTICS
  • ASTM F 792 : STANDARD PRACTICE FOR EVALUATING THE IMAGING PERFORMANCE OF SECURITY X-RAY SYSTEMS
  • ASTM F 792 ADJUNCT : ADJUNCT TO F792 STANDARD PRACTICE FOR EVALUATING THE IMAGING PERFORMANCE OF SECURITY X-RAY SYSTEMS
  • ASTM F 793 : STANDARD CLASSIFICATION OF WALL COVERING BY USE CHARACTERISTICS
  • ASTM F 794 : STANDARD SPECIFICATION FOR POLY (VINYL CHLORIDE) (PVC) PROFILE GRAVITY SEWER PIPE AND FITTINGS BASED ON CONTROLLED INSIDE DIAMETER
  • ASTM F 795 : DETERMINING THE PERFORMANCE OF A FILTER MEDIUM EMPLOYING A SINGLE-PASS, CONSTANT-RATE, LIQUID TEST
  • ASTM F 796 : STANDARD PRACTICE FOR DETERMINING THE PERFORMANCE OF A FILTER MEDIUM EMPLOYING A SINGLE-PASS, CONSTANT-PRESSURE, LIQUID TEST
  • ASTM F 797 : DETERMINING THE PERFORMANCE OF A FILTER MEDIUM EMPLOYING A MULTIPASS, CONSTANT-RATE, LIQUID TEST
  • ASTM F 798 : STANDARD PRACTICE FOR DETERMINING GETTERING RATE, SORPTION CAPACITY, AND GAS CONTENT OF NONEVAPORABLE GETTERS IN THE MOLECULAR FLOW REGION
  • ASTM F 799 : STANDARD SPECIFICATIONS FOR COBALT-28 CHROMIUM-6 MOLYBDENUM ALLOY FORGINGS FOR SURGICAL IMPLANTS (UNS R31537, R31538, R31539)
  • ASTM F 80 : CRYSTALLOGRAPHIC PERFECTION OF EPITAXIAL DEPOSITS OF SILICON BY ETCHING TECHNIQUES
  • ASTM F 800 : CORRUGATED POLY (VINYL CHLORIDE) TUBING AND COMPATIBLE FITTINGS
  • ASTM F 801 : STANDARD TEST METHOD FOR MEASURING OPTICAL ANGULAR DEVIATION OF TRANSPARENT PARTS
  • ASTM F 802 : STANDARD GUIDE FOR SELECTION OF CERTAIN WALKWAY SURFACES WHEN CONSIDERING FOOTWEAR TRACTION
  • ASTM F 803 : STANDARD SPECIFICATION FOR EYE PROTECTORS FOR SELECTED SPORTS
  • ASTM F 804 : PRACTICE FOR PRODUCING COATING RESIST THICKNESS CURVES
  • ASTM F 805 : TEST METHOD FOR PHOTOPLATE SURFACE FLATNESS BY INTERFEROMETRIC NONCONTACT TECHNIQUE
  • ASTM F 806 : STANDARD TEST METHOD FOR COMPRESSIBILITY AND RECOVERY OF LAMINATEDCOMPOSITE GASKET MATERIALS
  • ASTM F 807 : STANDARD PRACTICE FOR DETERMINING RESOLUTION CAPABILITY OF OFFICE COPIERS
  • ASTM F 808 : COLLECTING SKIMMER PERFORMANCE DATA IN UNCONTROLLED ENVIRONMENTS
  • ASTM F 809 : LARGE DIAMETER POLYBUTYLENE PLASTIC PIPE
  • ASTM F 809/F 809M : STANDARD SPECIFICATION FOR LARGE DIAMETER POLYBUTLYENE PLASTIC PIPE
  • ASTM F 809M : LARGE DIAMETER POLYBUTYLENE PLASTIC PIPE (METRIC)
  • ASTM F 81 : STANDARD TEST METHOD FOR MEASURING RADIAL RESISTIVITY VARIATION ON SILICON WAFERS
  • ASTM F 810 : STANDARD SPECIFICATION FOR SMOOTHWALL POLYETHYLENE (PE) PIPE FOR USE IN DRAINAGE AND WASTE DISPOSAL ABSORPTION FIELDS
  • ASTM F 811 : STANDARD PRACTICE FOR ACCELEROMETER USE IN VEHICLES FOR TIRE TESTING
  • ASTM F 812 : SURFACE DISCONTINUITIES OF NUTS, INCH & METRIC SER
  • ASTM F 812/F 812M : STANDARD SPECIFICATION FOR SURFACE DISCONTINUITIES OF NUTS, INCH AND METRIC SERIES
  • ASTM F 813 : STANDARD PRACTICE FOR DIRECT CONTACT CELL CULTURE EVALUATION OF MATERIALS FOR MEDICAL DEVICES
  • ASTM F 814 : SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOL
  • ASTM F 815 : DETECTION OF EPITAXIAL SPIKES
  • ASTM F 816 : STANDARD TEST METHOD FOR COMBINED FINE AND GROSS LEAKS FOR LARGE HYBRID MICROCIRCUIT PACKAGES
  • ASTM F 817 : CHARACTERIZATION OF FILM RESISTOR MATERIALS AND PROCESSES
  • ASTM F 818 : STANDARD TERMINOLOGY RELATING TO SPILL RESPONSE BARRIERS
  • ASTM F 819 : STANDARD TERMINOLOGY RELATING TO ELECTRICAL PROTECTIVE EQUIPMENT FOR WORKERS
  • ASTM F 820 : STANDARD TEST METHOD FOR MEASURING AIR PERFORMANCE CHARACTERISTICSOF CENTRAL VACUUM CLEANING SYSTEMS
  • ASTM F 821 : DOORS AND FRAMES, STEEL, INTERIOR, MARINE
  • ASTM F 821/F 821M : STANDARD SPECIFICATION FOR DOMERSIC USE DOORS AND FRAMES, STEEL, INTERIOR, MARINE
  • ASTM F 822 : STANDARD SPECIFICATION FOR CHEST OF DRAWERS (CHIFFONIER), STEEL, MARINE
  • ASTM F 823 : STANDARD SPECIFICATION FOR DESK, LOG, MARINE, STEEL, WITH CABINET
  • ASTM F 824 : STANDARD SPECIFICATION FOR TABLES, MESS, MARINE, STEEL
  • ASTM F 825 : STANDARD SPECIFICATION FOR DRAWERS, FURNITURE, MARINE, STEEL
  • ASTM F 826 : STANDARD SPECIFICATION FOR TOPS, FURNITURE, MARINE, STEEL
  • ASTM F 828 : RADIANT HEAT RESISTANCE OF AIRCRAFT INFLATABLE
  • ASTM F 829 : DETERMINING PROTEIN EFFICIENCY RATION FOR MEAT..
  • ASTM F 83 : STANDARD PRACTICE FOR DEFINITION AND DETERMINATION OF THERMIONIC CONSTANTS OF ELECTRON EMITTERS
  • ASTM F 830 : PREPARATION OF MEAT, VARIETY MEATS, MEAT
  • ASTM F 831 : DETERMINING NET PROTEIN RATIO FOR MEAT & MEAT PRODUCT
  • ASTM F 832 : STANDARD CLASSIFICATION FOR SECURITY SEALS
  • ASTM F 833 : STANDARD CONSUMER SAFETY PERFORMANCE SPECIFICATION FOR CARRIAGES AND STROLLERS
  • ASTM F 834 : STANDARD CONSUMER SAFETY SPECIFICATION FOR TOY CHESTS
  • ASTM F 835 : STANDARD SPECIFICATION FOR ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS
  • ASTM F 835M : STANDARD SPECIFICATION FOR ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS (METRIC)
  • ASTM F 836 : STAINLESS STEEL METRIC NUTS
  • ASTM F 836M : STANDARD SPECIFICATION FOR STYLE 1 STAINLESS STEEL METRIC NUTS
  • ASTM F 837 : STANDARD SPECIFICATION FOR STAINLESS STEEL SOCKET HEAD CAP SCREWS
  • ASTM F 837M : STANDARD SPECIFICATION FOR STAINLESS STEEL SOCKET HEAD CAP SCREWS [METRIC]
  • ASTM F 838 : STANDARD TEST METHOD FOR DETERMINING BACTERIAL RETENTION OF MEMBRANE FILTERS UTILIZED FOR LIQUID FILTRATION
  • ASTM F 839 : STANDARD SPECIFICATION FOR CAUTIONARY LABELING OF PORTABLE GASOLINE CONTAINERS FOR CONSUMER USE
  • ASTM F 84 : STANDARD TEST METHOD FOR MEASURING RESISTIVITY OF SILICON WAFERS WITH AN IN-LINE FOUR-POINT PROBE
  • ASTM F 840 : STANDARD SPECIFICATION FOR LADDERS, FIXED, VERTICAL, STEEL, SHIP’S
  • ASTM F 841 : STANDARD SPECIFICATION FOR THRUSTERS, TUNNEL, PERMANENTLY INSTALLED IN MARINE VESSELS
  • ASTM F 842 : STANDARD TEST METHODS FOR MEASURING THE FORCED ENTRY RESISTANCE OFSLIDING DOOR ASSEMBLIES, EXCLUDING GLAZING IMPACT
  • ASTM F 843 : STANDARD TEST METHOD FOR ASSESSING THE COLOR STRENGTH AND DISPERSIBILITY OF ALKALI BLUE PIGMENT IN HOT MELT CARBON COPY PAPER INK
  • ASTM F 844 : STANDARD SPECIFICATION FOR WASHERS, STEEL, PLAIN (FLAT), UNHARDENED FOR GENERAL USE
  • ASTM F 845 : STANDARD SPECIFICATION FOR PLASTIC INSERT FITTINGS FOR POLYBUTYLENE (PB) TUBING
  • ASTM F 846 : STANDARD GUIDE FOR TESTING PERFORMANCE OF AMUSEMENT RIDES AND DEVICES
  • ASTM F 847 : STANDARD TEST METHODS FOR MEASURING CRYSTALLOGRAPHIC ORIENTATION OF FLATS ON SINGLE CRYSTAL SILICON WAFERS BY X-RAY TECHNIQUES
  • ASTM F 848 : DETERMINING THE LATTICE CONSTANT OF SINGLE CRYSTAL GADOLINIUM GALLIUM GARNET
  • ASTM F 849 : IDENTIFICATION AND TEST OF STRUCTURES AND CONTAMINANTS SEEN ON POLISHED GADOLINIUM GALLIUM GARNET SURFACES
  • ASTM F 85 : STANDARD PRACTICE FOR NOMENCLATURE FOR WIRE LEADS USED AS CONDUCTORS IN ELECTRON TUBES
  • ASTM F 850 : CRYSTALLOGRAPHIC PERFECTION OF GADOLINIUM GALLIUM GARNET BY PREFERENTIAL ETCH TECHNIQUES
  • ASTM F 851 : STANDARD TEST METHOD FOR SELF-RISING SEAT MECHANISMS
  • ASTM F 852 : PORTABLE GASOLINE CONTAINERS FOR CONSUMER USE
  • ASTM F 853 : STANDARD PRACTICE FOR MAINTENANCE PROCEDURES OF AMUSEMENT RIDES AND DEVICES
  • ASTM F 854 : STANDARD TEST METHOD FOR CLEANLINESS OF CARBON PAPER
  • ASTM F 855 : STANDARD SPECIFICATIONS FOR TEMPORARY PROTECTIVE GROUNDS TO BE USED ON DE-ENERGIZED ELECTRIC POWER LINES AND EQUIPMENT
  • ASTM F 856 : STANDARD PRACTICE FOR MECHANICAL SYMBOLS, SHIPBOARD – HEATING, VENTILATION, AND AIR CONDITIONING (HVAC)
  • ASTM F 857 : STANDARD SPECIFICATION FOR HOT WATER SANITIZING COMMERCIAL DISHWASHING MACHINES, STATIONARY RACK TYPE
  • ASTM F 858 : STANDARD SPECIFICATION FOR HOT WATER SANITIZING COMMERCIAL DISHWASHING MACHINES, SINGLE TANK, CONVEYOR RACK TYPE
  • ASTM F 859 : STANDARD SPECIFICATION FOR HEAT-SANITIZING COMMERCIAL DISHWASHING MACHINES, MULTIPLE TANK, CONVEYOR RACK TYPE
  • ASTM F 86 : STANDARD PRACTICE FOR SURFACE PREPARATION AND MARKING OF METALLIC SURGICAL IMPLANTS
  • ASTM F 860 : STANDARD SPECIFICATION FOR HOT WATER SANITIZING COMMERCIAL DISHWASHING MACHINES, MULTIPLE TANK, RACKLESS CONVEYOR TYPE
  • ASTM F 861 : STANDARD SPECIFICATION FOR COMMERCIAL DISHWASHING RACKS
  • ASTM F 862 : STANDARD TEST METHOD FOR PH AND CHLORIDE-ION CONCENTRATION OF AEROSPACE HYDRAULIC FLUIDS
  • ASTM F 863 : PRACTICE FOR DETECTION OF DEFECTS IN SPIN-COATED RESIST
  • ASTM F 864 : INSPECTION OF HARD-SURFACE GLASS PHOTOPLATES
  • ASTM F 865 : STANDARD TEST METHOD FOR GROSS CAMBER OF CERAMIC SUBSTANCE FOR THICK FILM APPLICATIONS
  • ASTM F 866 : MEASURING THE PACKAGE ATTENUATION COEFFICIENT OF A SEALED DEVICE FOR RADIOISOTOPE HERMETIC TEST
  • ASTM F 867 : IONIZING RADIATION EFFECTS TESTING OF SEMICONDUCTOR DEVICES
  • ASTM F 867M : GUIDE FOR IONIZING RADIATION EFFECTS (TOTAL DOSE) TESTING OF SEMICONDUCTOR DEVICES (METRIC)
  • ASTM F 868 : STANDARD CLASSIFICATION FOR LAMINATED COMPOSITE GASKET MATERIALS
  • ASTM F 869 : STANDARD TERMINOLOGY RELATING TO ATHLETIC SHOES AND BIOMECHANICS
  • ASTM F 87 : RATE OF GREASE PENETRATION OF FLEXIBLE BARRIER MAT
  • ASTM F 870 : STANDARD PRACTICE FOR TREAD FOOTPRINTS OF PASSENGER CAR TIRES GROOVE AREA FRACTION AND DIMENSIONAL MEASUREMENTS
  • ASTM F 871M : STANDARD SPECIFICATION FOR ELECTRODEPOSITED COATINGS ON THREADED COMPONENTS (METRIC)
  • ASTM F 872 : SPECIFICATION FOR FILTER UNITS, AIR CONDITIONING: VISCOUS- IMPINGEMENT TYPE, CLEANABLE
  • ASTM F 873 : STANDARD GUIDE FOR INCINERATING OIL SPILL WASTES AT TEMPORARY FIELD LOCATIONS
  • ASTM F 874 : STANDARD TEST METHOD FOR TEMPERATURE MEASUREMENT AND PROFILING FORMICROWAVE SUSCEPTORS
  • ASTM F 875 : STANDARD TEST METHOD FOR EVALUATION OF LARGE AREA DENSITY AND BACKGROUND ON OFFICE COPIERS
  • ASTM F 876 : STANDARD SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING
  • ASTM F 877 : STANDARD SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) PLASTIC HOT- AND COLD-WATER DISTRIBUTION SYSTEMS
  • ASTM F 878 : POLYBUTYLENE (PB) THERMOPLASTIC THIN-WALL DRIP IRRIGATION TUBING
  • ASTM F 879 : STANDARD SPECIFICATION FOR STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS
  • ASTM F 879M : STANDARD SPECIFICATION FOR STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS [METRIC]
  • ASTM F 88 : STANDARD TEST METHOD FOR SEAL STRENGTH OF FLEXIBLE BARRIER MATERIALS
  • ASTM F 880 : STANDARD SPECIFICATION FOR STAINLESS STEEL SOCKET-SET SCREWS
  • ASTM F 880M : STANDARD SPECIFICATION FOR STAINLESS STEEL SOCKET SET SCREWS [METRIC]
  • ASTM F 881 : STANDARD SPECIFICATION FOR SILICONE ELASTOMER FACIAL INPLANTS
  • ASTM F 882 : STANDARD PERFORMANCE AND SAFETY SPECIFICATION FOR CRYOSURGICAL MEDICAL INSTRUMENTS
  • ASTM F 883 : STANDARD PERFORMANCE SPECIFICATION FOR PADLOCKS
  • ASTM F 884 : STANDARD TEST METHOD FOR MOTOR LIFE EVALUATION OF A BUILT-IN (CENTRAL VACUUM) VACUUM CLEANER
  • ASTM F 885 : STANDARD SPECIFICATION FOR ENVELOPE DIMENSIONS FOR BRONZE GLOBE VALVES NPS 1/4 TO 2
  • ASTM F 886 : APPARENT NITROGEN DIGESTIBLITY FOR MEAT AND MEAT PRODUCT
  • ASTM F 887 : STANDARD SPECIFICATIONS FOR PERSONAL CLIMBING EQUIPMENT
  • ASTM F 888 : STANDARD TEST METHOD FOR MEASURING MAXIMUM FUNCTION VOLUME OF THE PRIMARY DIRT RECEPTACLE IN A VACUUM CLEANER
  • ASTM F 889 : CHARACTERIZING A COMBINATION OF PROPERTIES OF PLANAR SURFACES TO A TECHNICAL LEVEL BY A VACUUM HOLD-DOWN TECHNIQUE
  • ASTM F 890 : DETERMINING PINHOLE DENSITY IN PHOTORESIST FILMS
  • ASTM F 891 : STANDARD SPECIFICATION FOR COEXTRUDED POLY(VINYL CHLORIDE) (PVC) PLASTIC PIPE WITH A CELLULAR CORE
  • ASTM F 892 : POLYETHLENE (PE) CORRUGATED PIPE WITH A SMOOTH INTERIOR AND FITTINGS
  • ASTM F 893 : STANDARD GUIDE FOR INSPECTION OF AMUSEMENT RIDES AND DEVICES
  • ASTM F 894 : STANDARD SPECIFICATION FOR POLYETHYLENE (PE) LARGE DIAMETER PROFILE WALL SEWER AND DRAIN PIPE
  • ASTM F 895 : STANDARD TEST METHOD FOR AGAR DIFFUSION CELL CULTURE SCREENING FORCYTOTOXICITY
  • ASTM F 896 : SPECIFICATION FOR FLEXIBLE FIBEROPTIC BRONCHOSCOPES
  • ASTM F 897 : STANDARD TEST METHOD FOR MEASURING FRETTING CORROSION OF OSTEOSYNTHESIS PLATES AND SCREWS
  • ASTM F 898 : PERMANENT MARKING OF ORTHOPEDIC IMPLANT COMPONENTS
  • ASTM F 899 : STANDARD SPECIFICATION FOR WROUGHT STAINLESS STEELS FOR SURGICAL INSTRUMENTS
  • ASTM F 9 : ROUND WIRE,USE,GRID SIDERODS IN ELECTRON TUBES
  • ASTM F 90 : STANDARD SPECIFICATION FOR WROUGHT COBALT-20CHROMIUM-15TUNGSTEN-10NICKEL ALLOY FOR SURGICAL IMPLANT APPLICATIONS (UNS R30605)
  • ASTM F 900 : STANDARD SPECIFICATION FOR INDUSTRIAL AND COMMERICIAL SWING GATES
  • ASTM F 901 : STANDARD SPECIFICATION FOR ALUMINUM TRANSMISSION TOWER BOLTS AND NUTS
  • ASTM F 902 : PRACTICE FOR CALCULATING THE AVERAGE CIRCULAR-CAPILLARY-EQUIVALENTPORE DIAMETER IN FILTER MEDIA FROM MEASUREMENTS OF POROSITY AND PERMEABILITY
  • ASTM F 903 : STANDARD TEST METHOD FOR RESISTANCE OF MATERIALS USED IN PROTECTIVE CLOTHING TO PENETRATION BY LIQUIDS
  • ASTM F 904 : STANDARD TEST METHOD FOR COMPARISON OF BOND STRENGTH OR PLY ADHESION OF SIMILAR LAMINATES MADE FROM FLEXIBLE MATERIALS
  • ASTM F 905 : STANDARD PRACTICE FOR QUALIFICATION OF POLYETHYLENE SADDLE-FUSED JOINTS
  • ASTM F 906 : STANDARD SPECIFICATION FOR LETTERS AND NUMERALS FOR SHIPS
  • ASTM F 907 : MEASUREMENT OF ROTATIONAL ACCELERATION OF A WAFER
  • ASTM F 908 : EVALUATING SAFELIGHTS FOR PHOTORESISTS
  • ASTM F 909 : STANDARD TERMINOLOGY RELATING TO PRINTERS
  • ASTM F 91 : STANDARD PRACTICE FOR TESTING FOR LEAKS IN THE FILTERS ASSOCIATED WITH LAMINAR FLOW CLEAN ROOMS AND CLEAN WORK STATIONS BY USE OF A CONDENSATION NUCLEI DETECTOR
  • ASTM F 910 : STANDARD SPECIFICATION FOR FACE GUARDS FOR YOUTH BASEBALL
  • ASTM F 911 : FLEXIBILITY OF RUNNING SHOES
  • ASTM F 912 : STANDARD SPECIFICATION FOR ALLOY STEEL SOCKET SET SCREWS
  • ASTM F 912M : STANDARD SPECIFICATION FOR ALLOY STEEL SOCKET SET SCREWS (METRIC)
  • ASTM F 913 : STANDARD SPECIFICATION FOR THERMOPLASTIC ELASTOMERIC SEALS (GASKETS) FOR JOINING PLASTIC PIPE
  • ASTM F 914 : STANDARD TEST METHOD FOR ACOUSTIC EMISSION FOR INSULATED AND NON-INSULATED AERIAL PERSONNEL DEVICES WITHOUT SUPPLEMENTAL LOAD HANDLING ATTACHMENTS
  • ASTM F 915 : BITTS, SHIP MOORING, CAST STEEL (DOUBLE BARREL)
  • ASTM F 916 : ELEVATORS, SHIPBOARD, ELECTROMECHANICAL PASSENGER, AND STORES
  • ASTM F 917 : STANDARD SPECIFICATION FOR COMMERCIAL FOOD WASTE DISPOSERS
  • ASTM F 918 : STANDARD SPECIFICATION FOR NONCARBONATED MECHANICALLY REFRIGERATED BEVERAGE DISPENSER (VISIBLE PRODUCT)
  • ASTM F 919 : STANDARD SPECIFICATION FOR SLICING MACHINES, FOOD, ELECTRIC
  • ASTM F 92 : STANDARD PRACTICE FOR DETERMINATION OF CHARACTER YIELD OF INKED FABRIC TYPEWRITER AND PRINTER RIBBONS
  • ASTM F 920 : STANDARD SPECIFICATION FOR MINIMUM PERFORMANCE AND SAFETY REQUIREMENTS FOR RESUSCITATORS INTENDED FOR USE WITH HUMANS
  • ASTM F 921 : STANDARD TERMINOLOGY RELATING TO HEMOSTATIC FORCEPS
  • ASTM F 922 : STANDARD TEST METHOD FOR MOTOR LIFE EVALUATION OF AN ELECTRIC MOTORIZED NOZZLE
  • ASTM F 923 : PROPERTIES OF HIGH VISIBILITY MATERIALS USED TO IMPROVE INDIVIDUALSAFETY
  • ASTM F 924 : STANDARD TEST METHOD FOR RESISTANCE TO PUNCTURE OF CUSHIONED RESILIENT FLOOR COVERINGS
  • ASTM F 925 : STANDARD TEST METHOD FOR RESISTANCE TO CHEMICALS OF RESILIENT FLOORING
  • ASTM F 926 : STANDARD SPECIFICATION FOR CAUTIONARY LABELING OF PORTABLE KEROSINE AND DIESEL CONTAINERS FOR CONSUMER USE
  • ASTM F 927 : PEDIATRIC TRACHEOSTOMY TUBES
  • ASTM F 928 : STANDARD TEST METHODS FOR EDGE CONTOUR OF CIRCULAR SEMICONDUCTOR WAFERS AND RIGID DISK SUBSTRATES
  • ASTM F 929 : STANDARD GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF CHEMICAL DISPERSANTS IN OIL SPILL RESPONSE – MARINE MAMMALS
  • ASTM F 930 : GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF CHEMICAL DISPERSANTS IN OIL SPILL RESPONSE – ROCKY SHORES
  • ASTM F 931 : STANDARD GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF CHEMICAL DISPERSANTS IN OIL SPILL RESPONSE – SEAGRASSES
  • ASTM F 932 : STANDARD GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF ECHEMICAL DISPERSANTS IN OIL SPILL RESPONSE – CORAL REEFS
  • ASTM F 933 : EVALUATION OF OIL WATER SEPARATION SYSTEMS FOR SPILLED OIL RECOVERY APPLICATIONS
  • ASTM F 934 : STANDARD SPECIFICATION FOR STANDARD COLORS FOR POLYMER-COATED CHAIN LINK FENCE MATERIALS
  • ASTM F 935 : STANDARD TEST METHOD FOR COMPARING COVER-UP CORRECTION MEDIA
  • ASTM F 936 : CHOCKS, PANAMA, MOORING CAST STEEL
  • ASTM F 937 : CHOCKS, SHIP MOORING, CAST STEEL
  • ASTM F 938 : BITTS, SHIP MOORING, WELDING STEEL (DOUBLE BARREL)
  • ASTM F 939 : STANDARD PRACTICE FOR SELECTION OF RELEASE TORQUE VALUES FOR ALPINE SKI BINDINGS
  • ASTM F 94 : ALUMINUM IN ELECTRONIC GRADE HYDROGEN PEROXIDE
  • ASTM F 940 : STANDARD PRACTICE FOR QUALITY CONTROL RECEIPT INSPECTION PROCEDURES FOR PROTECTIVE COATINGS (PAINT), USED IN MARINE CONSTRUCTION AND SHIPBUILDING
  • ASTM F 941 : STANDARD PRACTICE FOR INSPECTION OF MARINE SURFACE PREPARATION ANDCOATING APPLICATION
  • ASTM F 942 : STANDARD GUIDE FOR SELECTION OF TEST METHODS FOR INTERLAYER MATERIALS FOR AEROSPACE TRANSPARENT ENCLOSURES
  • ASTM F 943 : MEASURING HALATION OF TRANSPARENT PARTS
  • ASTM F 944 : STANDARD SPECIFICATION FOR PROPERTIES OF ADULT ALPINE SKI BOOTS
  • ASTM F 945 : STANDARD TEST METHOD FOR STRESS-CORROSION OF TITANIUM ALLOYS BY AIRCRAFT ENGINE CLEANING MATERIALS
  • ASTM F 946 : STANDARD GUIDE FOR ESTABLISHING SECURITY SEAL CONTROL AND ACCOUNTABILITY PROCEDURES
  • ASTM F 947 : DETERMINING LOW-LEVEL X-RADIATION SENSITIVITY OF PHOTOGRAPHIC FILMS
  • ASTM F 948 : STANDARD TEST METHOD FOR TIME-TO-FAILURE OF PLASTIC PIPING SYSTEMSAND COMPONENTS UNDER CONSTANT INTERNAL PRESSURE WITH FLOW
  • ASTM F 949 : STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) CORRUGATED SEWER PIPE WITH A SMOOTH INTERIOR AND FITTINGS
  • ASTM F 95 : STANDARD TEST METHOD FOR THICKNESS OF LIGHTLY DOPED SILICON EPITAXIAL LAYERS ON HEAVILY DOPED SILICON SUBSTRATES USING AN INFRARED DISPERSIVE SPECTROPHOTOMETER
  • ASTM F 950 : STANDARD TEST METHOD FOR MEASURING THE DEPTH OF CRYSTAL DAMAGE OF A MECHANICALLY WORKED SILICON SLICE SURFACE BY ANGLE POLISHING ANDDEFECT ETCHING
  • ASTM F 951 : STANDARD TEST METHOD FOR DETERMINATION OF RADIAL INTERSTITIAL OXYGEN VARIATION IN SILICON WAFERS
  • ASTM F 952 : STANDARD SPECIFICATION FOR MIXING MACHINES, FOOD, ELECTRIC
  • ASTM F 953 : STANDARD SPECIFICATION FOR COMMERCIAL DISHWASHING MACHINES (STATIONARY RACK, DUMP TYPE) CHEMICAL SANITIZING
  • ASTM F 954 : SPECIFICATION FOR RESPIRATORY HOME CARE
  • ASTM F 955 : STANDARD TEST METHOD FOR EVALUATING HEAT TRANSFER THROUGH MATERIALFOR PROTECTIVE CLOTHING UPON CONTACT WITH MOLTEN SUBSTANCES
  • ASTM F 956 : STANDARD SPECIFICATION FOR BELL, CAST, SOUND SIGNALLING
  • ASTM F 957 : STANDARD SPECIFICATION FOR GONG, SOUND SIGNALING
  • ASTM F 958 : DEVELOPING GUIDES FOR USING CONSUMER PRODUCTS
  • ASTM F 959 : STANDARD SPECIFICATION FOR COMPRESSIBLE-WASHER-TYPE DIRECT TENSIONINDICATORS FOR USE WITH STRUCTURAL FASTENERS
  • ASTM F 959M : STANDARD SPECIFICATION FOR COMPRESSIBLE-WASHER-TYPE DIRECT TENSIONINDICATORS FOR USE WITH STRUCTURAL FASTENERS [METRIC]
  • ASTM F 96 : STANDARD SPECIFICATION FOR ELECTRONIC GRADE ALLOYS OF COPPER AND NICKEL IN WROUGHT FORMS
  • ASTM F 960 : STANDARD SPECIFICATION FOR MEDICAL AND SURGICAL SUCTION AND DRAINAGE SYSTEMS
  • ASTM F 961 : STANDARD SPECIFICATION FOR 35COBALT-35NICKEL-20CHROMIUM-10 MOLYBDENUM ALLOY FORGINGS FOR SURGICAL IMPLANTS (UNS R30035)
  • ASTM F 962 : STANDARD SPECIFICATION FOR OIL SPILL RESPONSE BOOM CONNECTION: Z-CONNECTOR
  • ASTM F 963 : STANDARD CONSUMER SAFETY SPECIFICATION FOR TOY SAFETY
  • ASTM F 964 : STANDARD SPECIFICATION FOR RIGID POLY (VINYL CHLORIDE) (PVC) EXTERIOR PROFILES USED FOR FENCING AND RAILING
  • ASTM F 965 : STANDARD SPECIFICATION FOR RIGID LARYNGOSCOPES FOR INTUBATION – HOOK-ON FITTINGS FOR LARYNGOSCOPE HANDLES AND BLADES WITH LAMPS
  • ASTM F 966 : CONSUMER SAFETY SPECIFICATION FOR FULL-SIZE AND NON-FULL-SIZE BABYCRIB CORNER POST EXTENSIONS
  • ASTM F 967 : STANDARD PRACTICE FOR SECURITY ENGINEERING SYMBOLS
  • ASTM F 968 : STANDARD SPECIFICATION FOR ELECTRICALLY INSULATING PLASTIC GUARD EQUIPMENT FOR PROTECTION OF WORKERS
  • ASTM F 969 : STANDARD PRACTICE FOR CONSTRUCTION OF CHAIN-LINK TENNIS COURT FENCE
  • ASTM F 97 : STANDARD PRACTICES FOR DETERMINING HERMETICITY OF ELECTRON DEVICESBY DYE PENETRATION
  • ASTM F 970 : STANDARD TEST METHOD FOR STATIC LOAD LIMIT
  • ASTM F 971 : STANDARD GUIDE FOR ECOLOGICAL COSIDERATIONS FOR THE USE OF CHEMICAL DISPERSANTS IN OIL SPILL RESPONSE: MANGROVES
  • ASTM F 972 : GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF CHEMICAL DISPERSANTS IN OIL SPILL RESPONSE – NEARSHORE SUBTIDAL
  • ASTM F 973 : GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF CHEMICAL DISPERSANTS IN OIL SPILL RESPONSE: TIDAL FLATS
  • ASTM F 974 : STANDARD PRACTICE FOR DETERMINATION OF THE COLOR RESPONSE OF ELECTROSTATIC COPYING SYSTEM, BLACK AND WHITE OUTPUT
  • ASTM F 975 : AUXILIARY SINGLE STAGE STEAM TURBINES FOR SHIPBOARD USE
  • ASTM F 976 : STANDARD SPECIFICATION FOR PORTABLE KEROSINE AND DIESEL CONTAINERSFOR CONSUMER USE
  • ASTM F 977 : STANDARD CONSUMER SAFETY SPECIFICATION FOR INFANT WALKERS
  • ASTM F 978 : STANDARD TEST METHOD FOR CHARACTERIZING SEMICONDUCTOR DEEP LEVELS BY TRANSIENT CAPACITANCE TECHNIQUES
  • ASTM F 979 : STANDARD TEST METHOD FOR HERMETICITY OF HYBRID MICROCIRCUIT PACKAGES PRIOR TO LIDDING
  • ASTM G 1 : STANDARD PRACTICE FOR PREPARING, CLEANING, AND EVALUATING CORROSION TEST SPECIMENS
  • ASTM G 10 : STANDARD TEST METHOD FOR SPECIFIC BENDABILITY OF PIPELINE COATINGS
  • ASTM G 100 : STANDARD TEST METHOD FOR CONDUCTING CYCLIC GALVANOSTAIRCASE POLARIZATION
  • ASTM G 101 : STANDARD GUIDE FOR ESTIMATING THE ATMOSPHERIC CORROSION RESISTANCEOF LOW-ALLOY STEELS
  • ASTM G 102 : STANDARD PRACTICE FOR CALCULATION OF CORROSION RATES AND RELATED INFORMATION FROM ELECTROCHEMICAL MEASUREMENTS
  • ASTM G 103 : STANDARD PRACTICE FOR EVALUATING STRESS-CORROSION CRACKING RESISTANCE OF LOW COPPER 7XXX SERIES AL-ZN-MG-CU ALLOYS IN BOILING6 % SODIUM CHLORIDE SOLUTION
  • ASTM G 104 : ASSESSING GALVANIC CORROSION CAUSED BY THE ATMOSPHERE
  • ASTM G 105 : STANSARD TEST METHOD FOR CONDUCTING WET SAND/RUBBER WHEEL ABRASIONTESTS
  • ASTM G 106 : STANDARD PRACTICE FOR VERIFICATION OF ALGORITHM AND EQUIPMENT FOR ELECTROCHEMICAL IMPEDANCE MEASUREMENTS
  • ASTM G 107 : STANDARD GUIDE FOR FORMATS FOR COLLECTION AND COMPILATION OF CORROSION DATA FRO METALS FOR COMPUTERIZED DATABASE INPUT
  • ASTM G 108 : STANDARD TEST METHOD FOR ELECTROCHEMICAL REACTIVATION (EPR) FOR DETECTING SENSITIZATION OF AISI TYPE 304 AND 304L STAINLESS STEELS
  • ASTM G 109 : STANDARD TEST METHOD FOR DETERMINING THE EFFECTS OF CHEMICAL ADMIXTURES ON CORROSION OF EMBEDDED STEEL REINFORCEMENT IN CONCRETE EXPOSED TO CHLORIDE ENVIRONMENTS
  • ASTM G 11 : STANDARD TEST METHOD FOR EFFECTS OF OUTDOOR WEATHERING ON PIPELINECOATINGS
  • ASTM G 110 : STANDARD PRACTICE FOR EVALUATING INTERGRANULAR CORROSION RESISTANCE OF HEAT TREATABALE ALUMINUM ALLOYS BY IMMERSION IN SODIUM CHLORIDE + HYDROGEN PEROXIDE SOLUTION
  • ASTM G 111 : STANDARD GUIDE FOR CORROSION TESTS IN HIGH TEMPERATURE OR HIGH PRESSURE ENVIRONMENT, OR BOTH
  • ASTM G 112 : STANDARD GUIDE FOR CONDUCTING EXFOLIATION CORROSION TESTS IN ALUMINUM ALLOYS
  • ASTM G 113 : STANDARD TERMINOLOGY RELATING TO NATURAL AND ARTIFICIAL WEATHERINGTESTS OF NONMETALLIC MATERIALS
  • ASTM G 114 : STANDARD PRACTICES FOR EVALUATING THE AGE RESISTANCE OF POLYMERIC MATERIALS USED IN OXYGEN SERVICE
  • ASTM G 115 : STANDARD GUIDE FOR MEASURING AND REPORTING FRICTION COEFFICIENTS
  • ASTM G 116 : STANDARD PRACTICE FOR CONDUCTING WIRE-ON-BOLT TEST FOR ATMOSPHERIC GALVANIC CORROSION
  • ASTM G 117 : STANDARD GUIDE FOR CALCULATING AND REPORTING MEASURES OF PRECISIONUSING DATA FROM INTERLABORATORY WEAR OR EROSION TESTS
  • ASTM G 118 : STANDARD GUIDE FOR RECOMMENDED FORMAT OF WEAR TEST DATA SUITABLE FOR DATABASES
  • ASTM G 119 : STANDARD GUIDE FOR DETERMINING SYNERGISM BETWEEN WEAR AND CORROSION
  • ASTM G 12 : STANDARD TEST METHOD FOR NONDESTRUCTIVE MEASUREMENT OF FILM THICKNESS OF PIPELINE COATINGS ON STEEL
  • ASTM G 120 : STANDARD PRACTICE FOR DETERMINATION OF SOLUBLE RESIDUAL CONTAMINATION IN BY SOXHLET EXTRACTION
  • ASTM G 121 : STANDARD PRACTICE FOR PREPARATION OF CONTAMINATED TEST COUPONS FORTHE EVALUATION OF CLEANING AGENTS
  • ASTM G 122 : STANDARD TEST METHOD FOR EVALUATING THE EFFECTIVENESS OF CLEANING AGENTS
  • ASTM G 123 : STANDARD TEST METHOD FOR EVALUATING STRESS-CORROSION CRACKING OF STAINLESS ALLOYS WITH DIFFERENT NICKEL CONTENT IN BOILING ACIDIFIED SODIUM CHLORIDE SOLUTION
  • ASTM G 124 : STANDARD TEST METHOD FOR DETERMINING THE COMBUSTION BEHAVIOR OF METALLIC MATERIALS IN OXYGEN-ENRICHED ATMOSPHERES
  • ASTM G 125 : STANDARD TEST METHOD FOR MEASURING LIQUID AND SOLID MATERIAL FIRE LIMITS IN GASEOUS OXIDANTS
  • ASTM G 126 : STANDARD TERMINOLOGY RELATING TO THE COMPATIBILITY AND SENSITIVITYOF MATERIALS IN OXYGEN ENRICHED ATMOSPHERES
  • ASTM G 127 : STANDARD GUIDE FOR THE SELECTION OF CLEANING AGENTS FOR OXYGEN SYSTEMS
  • ASTM G 128 : STANDARD GUIDE FOR CONTROL OF HAZARDS AND RISKS IN OXYGEN ENRICHEDSYSTEMS
  • ASTM G 129 : STANDARD PRACTICE FOR SLOW STRAIN RATE TESTING TO EVALUATE THE SUSCEPTIBILITY OF METALLIC MATERIALS TO ENVIRONMENTALLY ASSISTED CRACKING
  • ASTM G 13 : STANDARD TEST METHOD FOR IMPACT RESISTANCE OF PIPELINE COATINGS (LIMESTONE DROP TEST)
  • ASTM G 130 : STANDARD TEST METHOD FOR CALIBRATION OF NARROW- AND BROAD-BAND ULTRAVIOLET RADIOMETERS USING A SPECTRORADIOMETER
  • ASTM G 131 : STANDARD PRACTICE FOR CLEANING OF MATERIALS AND COMPONENTS BY ULTRASONIC TECHNIQUES
  • ASTM G 132 : STANDARD TEST METHOD FOR PIN ABRASION TESTING
  • ASTM G 133 : STANDARD TEST METHOD FOR LINEARLY RECIPROCATING BALL-ON-FLAT SLIDING WEAR
  • ASTM G 134 : STANDARD TEST METHOD FOR EROSION OF SOLID MATERIALS BY A CAVITATING LIQUID JET
  • ASTM G 135 : STANDARD GUIDE FOR COMPUTERIZED EXCHANGE OF CORROSION DATA FOR METALS
  • ASTM G 136 : STANDARD PRACTICE FOR DETERMINATION OF SOLUBLE RESIDUAL CONTAMINANTS IN MATERIALS BY ULTRASONIC EXTRACTION
  • ASTM G 137 : STANDARD TEST METHOD FOR RANKING RESISTANCE OF PLASTIC MATERIALS TO SLIDING WEAR USING A BLOCK-ON-RING CONFIGURATION
  • ASTM G 138 : STANDARD TEST METHOD FOR CALIBRATION OF A SPECTRORADIOMETER USING A STANDARD SOURCE OF IRRADIANCE
  • ASTM G 139 : STANDARD TEST METHOD FOR DETERMINING STRESS-CORROSION CRACKING RESISTANCE OF HEAT-TREATABLE ALUMINUM ALLOY PRODUCTS USING BREAKING LOAD METHOD
  • ASTM G 14 : STANDARD TEST METHOD FOR IMPACT RESISTANCE OF PIPELINE COATINGS (FALLING WEIGHT TEST)
  • ASTM G 140 : STANDARD TEST METHOD FOR DETERMINING ATMOSPHERIC CHLORIDE DEPOSITION RATE BY WET CANDLE METHOD
  • ASTM G 141 : STANDARD GUIDE FOR ADDRESSING VARIABILITY IN EXPOSURE TESTING ON NONMETALLIC MATERIALS
  • ASTM G 142 : STANDARD TEST METHOD FOR DETERMINATION OF SUSCEPTIBILITY OF METALS TO EMBRITTLEMENT IN HYDROGEN CONTAINING ENVIRONMENTS AT HIGH PRESSURE, HIGH TEMPERATURE, OR BOTH
  • ASTM G 143 : STANDARD TEST METHOD FOR MEASUREMENT OF WEB/ROLLER FRICTION CHARACTERISTICS
  • ASTM G 144 : STANDARD TEST METHOD FOR DETERMINATION OF RESIDUAL CONTAMINATION OF MATERIALS AND COMPONENTS BY TOTAL CARBON ANALYSIS USING A HIGH TEMPERATURE COMBUSTION ANALYZER
  • ASTM G 145 : STANDARD GUIDE FOR STUDYING FIRE INCIDENTS IN OXYGEN SYSTEMS
  • ASTM G 146 : STANDARD PRACTICE FOR EVALUATION OF DISBONDING OF BIMETALLIC STAINLESS ALLOY/STEEL PLATE FOR USE IN HIGH-PRESSURE, HIGH-TEMPERATURE REFINERY HYDROGEN SERVICE
  • ASTM G 147 : STANDARD PRACTICE FOR CONDITIONING AND HANDLING OF NONMETALLIC MATERIALS FOR NATURAL AND ARTIFICIAL WEATHERING TESTS
  • ASTM G 148 : STANDARD PRACTICE FOR EVALUATION OF HYDROGEN UPTAKE, PERMEATION, AND TRANSPORT IN METALS BY AN ELECTROCHEMICAL TECHNIQUE
  • ASTM G 149 : STANDARD PRACTICE FOR CONDUCTING THE WASHER TEST FOR ATMOSPHERIC GALVANIC CORROSION
  • ASTM G 15 : STANDARD TERMINOLOGY RELATING TO CORROSION AND CORROSION TESTING
  • ASTM G 150 : STANDARD TEST METHOD FOR ELECTROCHEMICAL CRITICAL PITTING TEMPERATURE TESTING OF STAINLESS STEELS
  • ASTM G 151 : STANDARD PRACTICE FOR EXPOSING NONMETALLIC MATERIALS IN ACCELERATED TEST DEVICES THAT USE LABORATORY LIGHT SOURCES
  • ASTM G 152 : STANDARD PRACTICE FOR OPERATING OPEN FLAME CARBON ARC LIGHT APPARATUS FOR EXPOSURE OF NONMETALLIC MATERIALS
  • ASTM G 153 : STANDARD PRACTICE FOR OPERATING ENCLOSED CARBON ARC LIGHT APPARATUS FOR EXPOSURE OF NONMETALLIC MATERIALS
  • ASTM G 154 : STANDARD PRACTICE FOR OPERATING FLUORESCENT LIGHT APPARATUS FOR UVEXPOSURE OF NONMETALLIC MATERIALS
  • ASTM G 155 : STANDARD PRACTICE FOR OPERATING XENON ARC LIGHT APPARATUS FOR EXPOSURE OF NON-METALLIC MATERIALS
  • ASTM G 156 : STANDARD PRACTICE FOR SELECTING AND CHARACTERIZING WEATHERING REFERENCE MATERIALS USED TO MONITOR CONSISTENCY OF CONDITIONS IN AN EXPOSURE TEST
  • ASTM G 157 : STANDARD GUIDE FOR EVALUATING THE CORROSION PROPERTIES OF WROUGHT IRON- AND NICKEL-BASED CORROSION RESISTANT ALLOYS FOR THE CHEMICALPROCESS INDUSTRIES
  • ASTM G 158 : STANDARD GUIDE FOR THREE METHODS OF ASSESSING BURIED STEEL TANKS
  • ASTM G 159 : STANDARD TABLES FOR REFERENCES SOLAR SPECTRAL IRRADIANCE AT AIR MASS 1.5: DIRECT NORMAL AND HEMISPHERICAL FOR A 37 DEGREE TILTED SURFACE
  • ASTM G 16 : STANDARD GUIDE FOR APPLYING STATISTICS TO ANALYSIS OF CORROSION DATA
  • ASTM G 160 : STANDARD PRACTICE FOR EVALUATING MICROBIAL SUSCEPTIBILITY OF NONMETALLIC MATERIALS BY LABORATORY SOIL BURIAL
  • ASTM G 161 : STANDARD GUIDE FOR CORROSION-RELATED FAILURE ANALYSIS
  • ASTM G 162 : STANDARD PRACTICE FOR CONDUCTING AND EVALUATING LABORATORY CORROSIONS TESTS IN SOILS
  • ASTM G 163 : STANDARD GUIDE FOR DIGITAL DATA ACQUISITION IN WEAR AND FRICTION MEASUREMENTS
  • ASTM G 164 : STANDARD TEST METHOD FOR DETERMINATION OF SURFACE LUBRICATION ON FLEXIBLE WEBS
  • ASTM G 165 : STANDARD PRACTICE FOR DETERMINING RAIL-TO-EARTH RESISTANCE
  • ASTM G 166 : STANDARD GUIDE FOR STATISTICAL ANALYSIS OF SERVICE LIFE DATA
  • ASTM G 167 : STANDARD TEST METHOD FOR CALIBRATION OF A PYRANOMETER USING A PYRHELIOMETER
  • ASTM G 168 : STANDARD PRACTICE FOR MAKING AND USING PRECRACKED DOUBLE BEAM STRESS CORROSION SPECIMENS
  • ASTM G 169 : STANDARD GUIDE FOR APPLICATION OF BASIC STATISTICAL METHODS TO WEATHERING TESTS
  • ASTM G 17 : STANDARD TEST METHOD FOR PENETRATION RESISTANCE OF PIPELINE COATINGS (BLUNT ROD)
  • ASTM G 170 : STANDARD GUIDE FOR EVALUATING AND QUALIFYING OILFIELD AND REFINERYCORROSION INHIBITORS IN THE LABORATORY
  • ASTM G 171 : STANDARD TEST METHOD FOR SCRATCH HARDNESS OF MATERIALS USING A DIAMOND STYLUS
  • ASTM G 172 : STANDARD GUIDE FOR STATISTICAL ANALYSIS OF ACCELERATED SERVICE LIFE DATA
  • ASTM G 173 : STANDARD TABLES FOR REFERENCE SOLAR SPECTRAL IRRADIANCES: DIRECT NORMAL AND HEMISPHERICAL ON 37 DEGREE TILTED SURFACE
  • ASTM G 174 : STANDARD TEST METHOD FOR MEASURING ABRASION RESISTANCE OF MATERIALS BY ABRASIVE LOOP CONTACT
  • ASTM G 175 : STANDARD TEST METHOD FOR EVALUATING THE IGNITION SENSITIVITY AND FAULT TOLERANCE OF OXYGEN REGULATORS USED FOR MEDICAL AND EMERGENCY APPLICATIONS
  • ASTM G 176 : STANDARD TEST METHOD FOR RANKING RESISTANCE OF PLASTICS TO SLIDING WEAR USING BLOCK-ON-RING WEAR TEST-CUMULATIVE WEAR METHOD
  • ASTM G 177 : STANDARD TABLES FOR REFERENCE SOLAR ULTRAVIOLET SPECTRAL DISTRIBUTIONS: HEMISPHERICAL ON 37° TILTED SURFACE
  • ASTM G 179 : STANDARD SPECIFICATION FOR METAL BLACK PANEL AND WHITE PANEL TEMPERATURE DEVICES FOR NATURAL WEATHERING TESTS
  • ASTM G 18 : STANDARD TEST METHOD FOR JOINTS, FITTINGS, AND PATCHES IN COATED PIPELINES
  • ASTM G 180 : STANDARD TEST METHOD FOR INITIAL SCREENING OF CORROSION INHIBITINGADMIXTURES FOR STEEL IN CONCRETE
  • ASTM G 181 : STANDARD PRACTICE FOR CONDUCTING FRICTION TESTS OF PISTON RING AND CYLINDER LINER MATERIALS UNDER LUBRICATED CONDITIONS
  • ASTM G 182 : STANDARD TEST METHOD FOR DETERMINATION OF THE BREAKAWAY FRICTION CHARACTERISTICS OF ROLLING ELEMENT BEARINGS
  • ASTM G 183 : STANDARD PRACTICE FOR FIELD USE OF PYRANOMETERS, PYRHELIOMETERS AND UV RADIOMETERS
  • ASTM G 184 : STANDARD PRACTICE FOR EVALUATING AND QUALIFYING OIL FIELD AND REFINERY CORROSION INHIBITORS USING ROTATING CAGE
  • ASTM G 185 : STANDARD PRACTICE FOR EVALUATING AND QUALIFYING OIL FIELD AND REFINERY CORROSION INHIBITORS USING THE ROTATING CYLINDER ELECTRODE
  • ASTM G 186 : STANDARD TEST METHOD FOR DETERMINING WHETHER GAS-LEAK-DETECTOR FLUID SOLUTIONS CAN CAUSE STRESS CORROSION CRACKING OF BRASS ALLOYS
  • ASTM G 187 : STANDARD TEST METHOD FOR MEASUREMENT OF SOIL RESISTIVITY USING THETWO-ELECTRODE SOIL BOX METHOD
  • ASTM G 188 : STANDARD SPECIFICATION FOR LEAK DETECTOR SOLUTIONS INTENDED FOR USE ON BRASSES AND OTHER COPPER ALLOYS
  • ASTM G 189 : STANDARD GUIDE FOR LABORATORY SIMULATION OF CORROSION UNDER INSULATION
  • ASTM G 19 : STANDARD TEST METHOD FOR DISBONDING CHARACTERISTICS OF PIPELINE COATINGS BY DIRECT SOIL BURIAL
  • ASTM G 190 : STANDARD GUIDE FOR DEVELOPING AND SELECTING WEAR TESTS
  • ASTM G 2 : STANDARD TEST METHOD FOR CORROSION TESTING OF PRODUCTS OF ZIRCONIUM, HAFNIUM, AND THEIR ALLOYS IN WATER AT 680 DEGREES F OR IN STEAM AT 750 DEGREES F
  • ASTM G 2/G 2M : STANDARD TEST METHOD FOR CORROSION TESTING OF PRODUCTS OF ZIRCONIUM, HAFNIUM, AND THEIR ALLOYS IN WATER AT 680 DEGREES F [360 DEGREES C] OR IN STEAM AT 750 DEGREES F [400 DEGREES C]
  • ASTM G 20 : STANDARD TEST METHOD FOR CHEMICAL RESISTANCE OF PIPELINE COATINGS
  • ASTM G 21 : STANDARD PRACTICE FOR DETERMINING RESISTANCE OF SYNTHETIC POLYMERIC MATERIALS TO FUNGI
  • ASTM G 22 : DETERMINING RESISTANCE OF PLASTICS TO BACTERIA
  • ASTM G 23 : PRACTICE FOR OPERATING LIGHT-EXPOSURE APPARATUS (CARBON-ARC TYPE) WITH AND WITHOUT WATER FOR EXPOSURE OF NONMETALLIC MATERIALS
  • ASTM G 24 : STANDARD PRACTICE FOR CONDUCTING EXPOSURES TO DAYLIGHT FILTERED THROUGH GLASS
  • ASTM G 26 : PRACTICE FOR OPERATING LIGHT-EXPOSURE APPARATUS (XENON-ARC TYPE) WITH AND WITHOUT WATER FOR EXPOSURE OF NONMETALLIC MATERIALS
  • ASTM G 27 : RECOMMENDED PRACTICE FOR OPERATING XENON ARC TYPE APPARATUS FOR LIGHT EXPOSURE OF NONMETALLIC MATERIALS
  • ASTM G 28 : STANDARD TEST METHODS OF DETECTING SUSCEPTIBILITY TO INTERGRANULARCORROSION IN WROUGHT, NICKEL-RICH, CHROMIUM-BEARING ALLOYS
  • ASTM G 29 : STANDARD PRACTICE FOR DETERMINING ALGAL RESISTANCE OF PLASTIC FILMS
  • ASTM G 2M : CORROSION TESTING OF PRODUCTS OF ZIRCONIUM, HAFNIUM, AND THEIR ALLOYS IN WATER AT 633 DEGREE K OR IN STEAM AT 673 DEGREE K (METRIC)
  • ASTM G 3 : STANDARD PRACTICE FOR CONVENTIONS APPLICABLE TO ELECTROCHEMICAL MEASUREMENTS IN CORROSION TESTING
  • ASTM G 30 : STANDARD PRACTICE FOR MAKING AND USING U-BEND STRESS-CORROSION TEST SPECIMENS
  • ASTM G 31 : STANDARD PRACTICE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS
  • ASTM G 32 : STANDARD TEST METHOD FOR CAVITATION EROSION USING VIBRATORY APPARATUS
  • ASTM G 33 : STANDARD PRACTICE FOR RECORDING DATA FROM ATMOSPHERIC CORROSION TESTS OF METALLIC-COATED STEEL SPECIMENS
  • ASTM G 34 : STANDARD TEST METHOD FOR EXFOLIATION CORROSION SUSCEPTIBILITY IN 2XXX AND 7XXX SERIES ALUMINUM ALLOYS (EXCO TEST)
  • ASTM G 34 ADJUNCT : ADJUNCT TO G34 TEST METHOD FOR EXFOLIATION CORROSION SUSCEPTIBILITY IN 2XXX AND 7XXX SERIES ALUMINUM ALLOYS (EXCO TEST)
  • ASTM G 71 : STANDARD GUIDE FOR CONDUCTING AND EVALUATING GALVANIC CORROSION TESTS IN ELECTROLYTES
  • ASTM G 72 : STANDARD TEST METHOD FOR AUTOGENOUS IGNITION TEMPERATURE OF LIQUIDS AND SOLIDS IN A HIGH-PRESSURE OXYGEN-ENRICHED ENVIRONMENT
  • ASTM G 73 : STANDARD PRACTICE FOR LIQUID IMPINGEMENT EROSION TESTING
  • ASTM G 74 : STANDARD TEST METHOD FOR IGNITION SENSITIVITY OF MATERIALS TO GASEOUS FLUID IMPACT
  • ASTM G 75 : STANDARD TEST METHOD FOR DETERMINATION OF SLURRY ABRASIVITY (MILLER NUMBER) AND SLURRY ABRASION RESPONSE OF MATERIALS (SAR NUMBER)
  • ASTM G 76 : STANDARD TEST METHOD FOR CONDUCTING EROSION TESTS BY SOLID PARTICLE IMPINGEMENT USING GAS JETS
  • ASTM G 77 : STANDARD TEST METHOD FOR RANKING RESISTANCE OF MATERIALS TO SLIDING WEAR USING BLOCK-ON-RING WEAR TEST
  • ASTM G 78 : STANDARD GUIDE FOR CREVICE CORROSION TESTING OF IRON-BASE AND NICKEL-BASE STAINLESS ALLOYS IN SEAWATER AND OTHER CHLORIDE-CONTAINING AQUEOUS ENVIRONMENTS
  • ASTM G 79 : STANDARD PRACTICE FOR EVALUATION OF METALS EXPOSED TO CARBURIZATION ENVIRONMENTS
  • ASTM G 8 : STANDARD TEST METHODS FOR CATHODIC DISBONDING OF PIPELINE COATINGS
  • ASTM G 80 : STANDARD TEST METHOD FOR SPECIFIC CATHODIC DISBONDING OF PIPELINE COATINGS
  • ASTM G 81 : STANDARD TEST METHOD FOR JAW CRUSHER GOUGING ABRASION TEST
  • ASTM G 82 : STANDARD GUIDE FOR DEVELOPMENT AND USE OF A GALVANIC SERIES FOR PREDICTING GALVANIC CORROSION PERFORMANCE
  • ASTM G 83 : STANDARD TEST METHOD FOR WEAR TESTING WITH A CROSSED-CYLINDER APPARATUS
  • ASTM G 84 : STANDARD PRACTICE FOR MEASUREMENT OF TIME-OF-WETNESS ON SURFACES EXPOSED TO WETTING CONDITIONS AS IN ATMOSPHERIC CORROSION TESTING
  • ASTM G 85 : STANDARD PRACTICE FOR MODIFIED SALT SPRAY (FOG) TESTING
  • ASTM G 86 : STANDARD TEST METHOD FOR DETERMINING IGNITION SENSITIVITY OF MATERIALS TO MECHANICAL IMPACT IN AMBIENT LIQUID OXYGEN AND PRESSURIZED LIQUID AND GASEOUS OXYGEN ENVIRONMENTS
  • ASTM G 87 : STANDARD PRACTICE FOR CONDUCTING MOIST SO2 TESTS
  • ASTM G 88 : STANDARD GUIDE FOR DESIGNING SYSTEMS FOR OXYGEN SERVICE (ALSO SEE ASTM G 88 ADJUNCT)
  • ASTM G 88 ADJUNCT : ADJUNCT TO G88 GUIDE FOR DESIGNING SYSTEMS FOR OXYGEN SERVICE
  • ASTM G 89 : CATHODIC DISONDING OF PIPELINE COATINGS SUBJECTED
  • ASTM G 9 : STANDARD TEST METHOD FOR WATER PENETRATION INTO PIPELINE COATINGS
  • ASTM G 90 : STANDARD PRACTICE FOR PERFORMING ACCELERATED OUTDOOR WEATHERING OFNONMETALLIC MATERIALS USING CONCENTRATED NATURAL SUNLIGHT
  • ASTM G 91 : STANDARD PRACTICE FOR MONITORING ATMOSPHERIC SO2 USING THE SULFATION PLATE TECHNIQUE
  • ASTM G 92 : STANDARD PRACTICE FOR CHARACTERIZATION OF ATMOSPHERIC TEST SITES
  • ASTM G 93 : STANDARD PRACTICE FOR CLEANING METHODS AND CLEANLINESS LEVELS FOR MATERIAL AND EQUIPMENT USED IN OXYGEN-ENRICHED ENVIRONMENTS
  • ASTM G 94 : STANDARD GUIDE FOR EVALUATING METALS FOR OXYGEN SERVICE
  • ASTM G 95 : TEST METHOD FOR CATHODIC DISBONDMENT TEST OF PIPELINE COATINGS (ATTACHED CELL METHOD)
  • ASTM G 96 : STANDARD GUIDE FOR ON-LINE MONITORING OF CORROSION IN PLANT EQUIPMENT (ELECTRICAL AND ELECTROCHEMICAL METHODS)
  • ASTM G 97 : STANDARD TEST METHOD FOR LABORATORY EVALUATION OF MAGNESIUM SACRIFICIAL ANODE TEST SPECIMENS FOR UNDERGROUND APPLICATIONS
  • ASTM G 98 : STANDARD TEST METHOD FOR GALLING RESISTANCE OF MATERIALS
  • ASTM G 99 : STANDARD TEST METHOD FOR WEAR TESTING WITH A PIN-ON-DISK APPARATUS

ASTM A , ASTM B ,  ASTM C ,  ASTM D , ASTM E ASTM F  ASTM G 1 |