STD-ASTM D XXXX

아래 ASTM (American Society for Testing and Materials) 규격 목록은 규격번호와 제목을 발췌, 열거한 것입니다. [출처 : www.astm.org ]

ASTM A , ASTM B ,  ASTM C ,  ASTM D 1 || 2 || 3 || 4 || 5 || 6 || 7 || 8 | , ASTM E ASTM F , ASTM G

  • ASTM D1000 : EN-Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
  • ASTM D1000 REV A : EN-STANDARD METHODS OF TESTING PRESSURE- SENSITIVE ADHESIVE COATED TAPES USED FOR ELECTRICAL INSULATION
  • ASTM D1002 : EN-Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-To-Metal)
  • ASTM D1003 : EN-Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
  • ASTM D1004 : EN-STANDARD TEST METHOD FOR INITIAL TEAR RESISTANCE OF PLASTIC FILM AND SHEETING
  • ASTM D1004 REV A : EN-Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
  • ASTM D1005 : EN-STANDARD TEST METHOD FOR MEASUREMENT OF DRY-FILM THICKNESS OF ORGANIC COATINGS USING MICROMETERS (R 1990) (E1-1990)
  • ASTM D1006 : EN-STANDARD PRACTICE FOR CONDUCTING EXTERIOR EXPOSURE TESTS OF PAINTS ON WOOD
  • ASTM D1007 : EN-Standard Specification for sec-Butyl Alcohol
  • ASTM D1008 : EN-Standard Test Methods for Water Vapor Transmission of Shipping Containers
  • ASTM D1013 : EN-Standard Test Method for Determining Total Nitrogen in Resins and Plastics
  • ASTM D1014 : EN-STANDARD TEST METHOD FOR CONDUCTING EXTERIOR EXPOSURE TESTS OF PAINTS ON STEEL (R 1988) (E1-1988)
  • ASTM D1015 : EN-Standard Test Method for Freezing Points of High-Purity Hydrocarbons
  • ASTM D1016 : EN-Standard Test Method for Purity of Hydrocarbons from Freezing Points
  • ASTM D1018 : EN-Standard Test Method for Hydrogen in Petroleum Fractions
  • ASTM D1019 : EN-STANDARD TEST METHOD FOR OLEFINIC PLUS AROMATIC HYDROCARBONS IN PETROLEUM DISTILLATES (R-1978)
  • ASTM D1025 : EN-Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene
  • ASTM D1026 : EN-STANDARD TEST METHOD FOR SODIUM IN LUBRICATING OILS AND ADDITIVES (GRAVIMETRIC METHOD)
  • ASTM D1029 : EN-Standard Test Method for Peeling Resistance of Paper and Paperboard
  • ASTM D1030 : EN-Standard Test Method for Fiber Analysis of Paper and Paperboard
  • ASTM D1031 : EN-STANDARD SPECIFICATION FOR CREOSOTED END-GRAIN WOOD BLOCK FLOORING FOR INTERIOR USE (R 1986) (E1-1986)
  • ASTM D1032 : EN-STANDARD SPECIFICATION FOR CHROMATED ZINC CHLORIDE
  • ASTM D1033 : EN-STANDARD METHODS OF CHEMICAL ANALYSIS OF CHROMATED ZINC CHLORIDE
  • ASTM D1034 : EN-Standard Specification for Fluor-Chrome-Arsenate-Phenol
  • ASTM D1035 : EN-Standard Test Methods for Chemical Analysis of Fluor-Chrome-Arsenate-Phenol
  • ASTM D1036 : EN-Standard Test Methods of Static Tests of Wood Poles
  • ASTM D1037 : EN-STANDARD TEST METHODS FOR EVALUATING PROPERTIES OF WOOD-BASE FIBER AND PARTICLE PANEL MATERIALS
  • ASTM D1037 REV A : EN-Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
  • ASTM D1038 : EN-Standard Terminology Relating to Veneer and Plywood
  • ASTM D1039 : EN-Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
  • ASTM D1042 : EN-Standard Test Method for Linear Dimensional Changes of Plastics under Accelerated Service Conditions
  • ASTM D1042 REV A : EN-Standard Test Method for Linear Dimensional Changes of Plastics under Accelerated Service Conditions
  • ASTM D1043 : EN-Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
  • ASTM D1044 : EN-STANDARD TEST METHOD FOR RESISTANCE OF TRANSPARENT PLASTICS TO SURFACE ABRASION
  • ASTM D1045 : EN-STANDARD METHODS OF SAMPLING AND TESTING PLASTICIZERS USED IN PLASTICS
  • ASTM D1047 : EN-Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
  • ASTM D1048 : EN-Standard Specification for Rubber Insulating Blankets
  • ASTM D1048 REV A : EN-STANDARD SPECIFICATION FOR RUBBER INSULATING BLANKETS (E1-1989)
  • ASTM D1049 : EN-Standard Specification for Rubber Insulating Covers
  • ASTM D1050 : EN-Standard Specification for Rubber Insulating Line Hose
  • ASTM D1051 : EN-Standard Specification for Rubber Insulating Sleeves
  • ASTM D1052 : EN-Standard Test Method for Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus
  • ASTM D1053 : EN-STANDARD TEST METHODS FOR RUBBER PROPERTY – STIFFENING AT LOW TEMPERATURES: FLEXIBLE POLYMERS AND COATED FABRICS
  • ASTM D1053 REV A : EN-Standard Test Methods for Rubber Property – Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
  • ASTM D1054 : EN-Standard Test Method for Rubber PropertyResilience Using a Goodyear-Healey Rebound Pendulum
  • ASTM D1055 : EN-Standard Specifications for Flexible Cellular Materials – Latex Foam
  • ASTM D1056 : EN-Standard Specification for Sponge and Expanded Cellular Rubber Products
  • ASTM D1059 : EN-STANDARD TEST METHOD FOR YARN NUMBER BASED ON SHORT-LENGTH SPECIMENS
  • ASTM D1060 : EN-Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present
  • ASTM D1061 : EN-Standard Specification for Asbestos Lap
  • ASTM D1061/D1061M : EN-Standard Specification for Asbestos Lap
  • ASTM D1062 : EN-Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
  • ASTM D1063 : EN-STANDARD TEST METHOD FOR ASH IN ROSIN
  • ASTM D1064 : EN-STANDARD TEST METHODS FOR IRON IN ROSIN (R 1981)
  • ASTM D1065 : EN-Standard Test Method for Unsaponifible Matter in Naval Stores Including Rosin Tall Oil and Related Products
  • ASTM D1066 : EN-Standard Practice for Sampling Steam
  • ASTM D1067 : EN-Standard Test Methods for Acidity or Alkalinity of Water
  • ASTM D1068 : EN-STANDARD TEST METHODS FOR IRON IN WATER
  • ASTM D1068 REV A : EN-STANDARD TEST METHODS FOR IRON IN WATER
  • ASTM D1070 : EN-Standard Test Methods for Relative Density of Gaseous Fuels
  • ASTM D1071 : EN-Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
  • ASTM D1072 : EN-Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
  • ASTM D1073 : EN-Standard Specification for Fine Aggregate for Bituminous Paving Mixtures
  • ASTM D1074 : EN-Standard Test Method for Compressive Strength of Bituminous Mixtures
  • ASTM D1075 : EN-Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures-AASHTO No. T165
  • ASTM D1076 : EN-Standard Specification for Rubber – Concentrated Ammonia Preserved Creamed and Centrifuged Natural Latex
  • ASTM D1078 : EN-Standard Test Method for Distillation Range of Volatile Organic Liquids-IP Designation: 195/81
  • ASTM D1079 : EN-Standard Terminology Relating to Roofing Waterproofing and Bituminous Materials
  • ASTM D1079 REV A : EN-Standard Terminology Relating to Roofing Waterproofing and Bituminous Materials
  • ASTM D1082 : EN-Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
  • ASTM D1083 : EN-STANDARD METHODS OF TESTING MECHANICAL HANDLING OF UNITIZED LOADS AND LARGE SHIPPING CASES AND CRATES
  • ASTM D1084 : EN-Standard Test Methods for Viscosity of Adhesives
  • ASTM D1085 : EN-Standard Practice for Gaging Petroleum and Petroleum Products
  • ASTM D1086 : EN-Standard Method of Measuring the Temperature of Petroleum Products
  • ASTM D1091 : EN-STANDARD TEST METHODS FOR PHOSPHORUS IN LUBRICATING OILS AND ADDITIVES
  • ASTM D1092 : EN-Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
  • ASTM D1093 : EN-Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
  • ASTM D1094 : EN-Standard Test Method for Water Reaction of Aviation Fuels
  • ASTM D1098 : EN-STANDARD METHOD OF STATIC BENDING TEST FOR CORRUGATED PAPERBOARD (R 1973) (DISCONTINUED)
  • ASTM D1101 : EN-Standard Test Methods for Integrity of Glue Joints in Structural Laminated Wood Products for Exterior Use
  • ASTM D1101 REV A : EN-Standard Test Methods for Integrity of Glue Joints in Structural Laminated Wood Products for Exterior Use
  • ASTM D1102 : EN-Standard Test Method for Ash in Wood-TAPPI T 211 OM-80: E1-1995
  • ASTM D1105 : EN-Standard Test Method for Preparation of Extractive-Free Wood
  • ASTM D1106 : EN-Standard Test Method for Acid-Insoluble Lignin in Wood
  • ASTM D1107 : EN-Standard Test Method for Ethanol-Toluene Solubility of Wood-TAPPI T 204 OS-76
  • ASTM D1108 : EN-STANDARD TEST METHOD FOR DICHLOROMETHANE SOLUBLES IN WOOD (TAPPI STANDARD METHOD T 204-OS-76) (R 1990)
  • ASTM D1109 : EN-Standard Test Method for 1% Sodium Hydroxide Solubility of Wood-TAPPI T 212 os-76
  • ASTM D1110 : EN-Standard Test Methods for Water Solubility of Wood-TAPPI T 207 om-81; E1-1995
  • ASTM D1113 : EN-STANDARD TEST METHOD FOR VEGETABLE MATTER AND OTHER ALKALI-INSOLUBLE IMPURITIES IN SCOURED WOOL (R 1983)
  • ASTM D1113 REV A : EN-Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
  • ASTM D1117 : EN-STANDARD METHODS OF TESTING NONWOVEN FABRICS
  • ASTM D1117 REV A : EN-Standard Test Methods for Nonwoven Fabrics
  • ASTM D1118 : EN-Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
  • ASTM D1118/D1118M : EN-Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
  • ASTM D1119 : EN-Standard Test Method for Percent Ash Content of Engine Coolants
  • ASTM D1120 : EN-Standard Test Method for Boiling Point of Engine Coolants
  • ASTM D1121 : EN-STANDARD TEST METHOD FOR RESERVE ALKALINITY OF ENGINE ANTIFREEZE ANTIRUSTS AND COOLANTS
  • ASTM D1122 : EN-Standard Test Method for Specific Gravity of Engine Coolant Concentrates and Engine Coolants by the Hydrometer
  • ASTM D1122 REV A : EN-STANDARD TEST METHOD FOR SPECIFIC GRAVITY OF ENGINE COOLANTS CONCENTRATES AND ENGINE COOLANTS BY THE HYDROMETER
  • ASTM D1123 : EN-Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
  • ASTM D1124 : EN-STANDARD SPECIFICATION FOR HYDROMETER- THERMOMETER FIELD TESTER FOR ENGINE COOLANTS
  • ASTM D1125 : EN-Standard Test Methods for Electrical Conductivity and Resistivity of Water
  • ASTM D1126 : EN-Standard Test Method for Hardness in Water
  • ASTM D1129 : EN-Standard Terminology Relating to Water
  • ASTM D1129 REV A : EN-Standard Terminology Relating to Water
  • ASTM D1129 REV B : EN-STANDARD DEFINITIONS OF TERMS RELATING TO WATER
  • ASTM D113 : EN-Standard Test Method for Ductility of Bituminous Materials-AASHTO No.: T51
  • ASTM D1131 : EN-METHODS OF TESTING ROSIN OILS (R 1981)
  • ASTM D1133 : EN-STANDARD TEST METHOD FOR KAURI-BUTANOL VALUE OF HYDROCARBON SOLVENTS
  • ASTM D1135 : EN-Standard Test Methods for Chemical Analysis of Blue Pigments
  • ASTM D1139 : EN-Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
  • ASTM D1139/D1139M : EN-Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
  • ASTM D1140 : EN-STANDARD TEST METHOD FOR AMOUNT OF MATERIAL IN SOILS FINER THAN THE NO. 200 (75-MICROMETER) SIEVE (R 1990) (E1-1990)_
  • ASTM D1141 : EN-STANDARD SPECIFICATION FOR SUBSTITUTE OCEAN WATER
  • ASTM D1142 : EN-Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • ASTM D1143 : EN-Standard Test Method for Piles under Static Axial Compressive Load
  • ASTM D1143/D1143M : EN-Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
  • ASTM D1144 : EN-Standard Practice for Determining Strength Development of Adhesive Bonds
  • ASTM D1145 : EN-STANDARD METHOD OF SAMPLING NATURAL GAS
  • ASTM D1146 : EN-STANDARD TEST METHOD FOR BLOCKING POINT OF POTENTIALLY ADHESIVE LAYERS (R 1981)
  • ASTM D1148 : EN-Standard Test Method for Rubber Deterioration – Heat and Ultraviolet Light Discoloration of Light-Colored Surfaces
  • ASTM D1148 REV A : EN-Standard Test Method for Rubber Deterioration-Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
  • ASTM D1149 : EN-Standard Test Method for Rubber Deterioration – Surface Ozone Cracking in a Chamber
  • ASTM D115 : EN-Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
  • ASTM D115 REV A : EN-STANDARD TEST METHODS FOR TESTING SOLVENT CONTAINING VARNISHES USED FOR ELECTRICAL INSULATION
  • ASTM D1150 : EN-STANDARD SINGLE- AND MULTI-PANEL FORMS FOR RECORDING RESULTS OF EXPOSURE TESTS OF PAINTS (R 1987) (DISCONTINUED)
  • ASTM D1151 : EN-Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
  • ASTM D1152 : EN-Standard Specification for Methanol (Methyl Alcohol)
  • ASTM D1153 : EN-Standard Specification for Methyl Isobutyl Ketone
  • ASTM D1155 : EN-Standard Test Method for Roundness of Glass Spheres
  • ASTM D1157 : EN-Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
  • ASTM D1159 : EN-STANDARD TEST METHOD FOR BROMINE NUMBER OF PETROLEUM DISTILLATES AND COMMERCIAL ALIPHATIC OLEFINS BY ELECTROMETRIC TITRATION (BRITISH STANDARD 5089) (IP 130/78)
  • ASTM D116 : EN-Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
  • ASTM D1160 : EN-Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
  • ASTM D1160 REV A : EN-Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
  • ASTM D1163 : EN-STANDARD TEST METHOD FOR LINT OF PAPER TOWELS
  • ASTM D1165 : EN-Standard Nomenclature of Domestic Hardwoods and Softwoods-(Reinstated)
  • ASTM D1166 : EN-Standard Test Method for Methoxyl Groups in Wood and Related Materials
  • ASTM D1168 : EN-Standard Test Methods for Hydrocarbon Waxes Used for Electrical Insulation
  • ASTM D1169 : EN-Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
  • ASTM D117 : EN-Standard Guide to Test Methods and Specifications for Electrical Insulating Oils of Petroleum Origin
  • ASTM D1170 : EN-Tentative Specification for Nonmetallic Gasket Materials for General Automotive and Aeronautical Purposes
  • ASTM D1171 : EN-STANDARD TEST METHOD FOR RUBBER DETERIORATION – SURFACE OZONE CRACKING OUTDOORS OR CHAMBER (TRIANGULAR SPECIMENS)
  • ASTM D1172 : EN-STANDARD TEST METHOD FOR PH OF AQUEOUS SOLUTIONS OF SOAPS AND DETERGENTS
  • ASTM D1173 : EN-Standard Test Method for Foaming Properties of Surface-Active Agents
  • ASTM D1175 : EN-Standard Test Methods for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder and Uniform Abrasion Methods)
  • ASTM D1176 : EN-Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
  • ASTM D1177 : EN-STANDARD TEST METHOD FOR FREEZING POINT OF AQUEOUS ENGINE COOLANTS
  • ASTM D1177 REV A : EN-STANDARD TEST METHOD FOR FREEZING POINT OF AQUEOUS ENGINE COOLANTS
  • ASTM D1179 : EN-STANDARD TEST METHODS FOR FLUORIDE ION IN WATER
  • ASTM D1181 : EN-Method of Test for Warpage of Sheet Plastics
  • ASTM D1183 : EN-STANDARD TEST METHODS FOR RESISTANCE OF ADHESIVES TO CYCLIC LABORATORY AGING CONDITIONS (R 1987)
  • ASTM D1184 : EN-Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
  • ASTM D1185 : EN-Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
  • ASTM D1185 REV A : EN-Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
  • ASTM D1186 : EN-Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base
  • ASTM D1187 : EN-Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
  • ASTM D1188 : EN-STANDARD TEST METHOD FOR BULK SPECIFIC GRAVITY AND DENSITY OF COMPACTED BITUMINOUS MIXTURES USING PARAFFIN-COATED SPECIMENS
  • ASTM D119 : EN-STANDARD SPECIFICATION FOR LOW-VOLTAGE RUBBER INSULATING TAPE
  • ASTM D1190 : EN-Standard Specification for Concrete Joint Sealer Hot-Applied Elastic Type
  • ASTM D1191 : EN-Standard Test Methods for Concrete Joint Sealers
  • ASTM D1192 : EN-Standard Guide for Equipment for Sampling Water and Steam in Closed Conduits
  • ASTM D1193 : EN-Standard Specification for Reagent Water
  • ASTM D1194 : EN-Standard Test Method for Bearing Capacity of Soil for Static Load and Spread Footings
  • ASTM D1195 : EN-STANDARD TEST METHOD FOR REPETITIVE STATIC PLATE LOAD TESTS OF SOILS AND FLEXIBLE PAVEMENT COMPONENTS FOR USE IN EVALUATION AND DESIGN OF AIRPORT AND HIGHWAY PAVEMENTS (R 1987) (AASHTO T221)
  • ASTM D1195/D1195M : EN-Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements
  • ASTM D1196 : EN-STANDARD TEST METHOD FOR NONREPETITIVE STATIC PLATE LOAD TESTS OF SOILS AND FLEXIBLE PAVEMENT COMPONENTS FOR USE IN EVALUATION AND DESIGN OF AIRPORT AND HIGHWAY PAVEMENTS (R 1987)
  • ASTM D1198 : EN-Standard Test Method for Solvent Tolerance of Amine Resins
  • ASTM D1199 : EN-Standard Specification for Calcium Carbonate Pigments
  • ASTM D12 : EN-STANDARD SPECIFICATION FOR RAW TUNG OIL
  • ASTM D120 : EN-Standard Specification for Rubber Insulating Gloves
  • ASTM D120 REV A : EN-Standard Specification for Rubber Insulating Gloves
  • ASTM D1200 : EN-STANDARD TEST METHOD FOR VISCOSITY OF PAINTS VARNISHES AND LACQUERS BY FORD VISCOSITY CUP
  • ASTM D1201 : EN-Standard Specification for Thermosetting Polyester Molding Compounds
  • ASTM D1202 : EN-STANDARD SPECIFICATION FOR PLASTICIZED CELLULOSE ACETATE SHEET AND FILM FOR PRIMARY INSULATION
  • ASTM D1203 : EN-Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods
  • ASTM D1204 : EN-Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
  • ASTM D1208 : EN-Standard Test Methods for Common Properties of Certain Pigments
  • ASTM D1209 : EN-Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
  • ASTM D121 : EN-STANDARD TERMINOLOGY OF COAL AND COKE (E1-1994)
  • ASTM D121 REV A : EN-Standard Terminology of Coal and Coke
  • ASTM D1210 : EN-Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
  • ASTM D1211 : EN-Standard Test Method for Temperature-Change Resistance of Clear Nitrocellulose Lacquer Films Applied to Wood
  • ASTM D1212 : EN-Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
  • ASTM D1214 : EN-STANDARD METHOD FOR SIEVE ANALYSIS OF GLASS SPHERES (R 1983)(E1-1983)
  • ASTM D1217 : EN-Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
  • ASTM D1218 : EN-STANDARD TEST METHOD FOR REFRACTIVE INDEX AND REFRACTIVE DISPERSION OF HYDROCARBON LIQUIDS
  • ASTM D122 : EN-STANDARD SPECIFICATIONS FOR TIRE FABRICS OTHER THAN TIRE CORD FABRICS
  • ASTM D1220 : EN-Standard Practice for Measurement and Calibration of Upright Cylindrical Tanks
  • ASTM D1223 : EN-STANDARD TEST METHOD FOR SPECULAR GLOSS OF PAPER AND PAPERBOARD AT 75 DEGREES
  • ASTM D1224 : EN-Standard Test Methods for Zinc and Cadmium in Paper
  • ASTM D1227 : EN-Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
  • ASTM D1229 : EN-STANDARD TEST METHOD FOR RUBBER PROPERTY – COMPRESSION SET AT LOW TEMPERATURES
  • ASTM D123 : EN-STANDARD TERMINOLOGY RELATING TO TEXTILES
  • ASTM D123 REV A : EN-STANDARD TERMINOLOGY RELATING TO TEXTILES
  • ASTM D123 REV B : EN-Standard Terminology Relating to Textiles
  • ASTM D123 REV C : EN-STANDARD TERMINOLOGY RELATING TO TEXTILES
  • ASTM D1230 : EN-STANDARD TEST METHOD FOR FLAMMABILITY OF APPAREL TEXTILES
  • ASTM D1233 : EN-Standard Specification for Twine Made from Bast and Leaf Fibers
  • ASTM D1234 : EN-Standard Test Method of Sampling and Testing Staple Length of Grease Wool
  • ASTM D1238 : EN-STANDARD TEST METHOD FOR FLOW RATES OF THERMOPLASTICS BY EXTRUSION PLASTOMETER
  • ASTM D1238 REV A : EN-STANDARD TEST METHOD FOR FLOW RATES OF THERMOPLASTICS BY EXTRUSION PLASTOMETER
  • ASTM D1238 REV B : EN-STANDARD TEST METHOD FOR FLOW RATES OF THERMOPLASTICS BY EXTRUSION PLASTOMETER
  • ASTM D1238 REV C : EN-Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
  • ASTM D1239 : EN-Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
  • ASTM D124 : EN-STANDARD SPECIFICATION FOR DEGUMMED SOYBEAN OIL
  • ASTM D1240 : EN-STANDARD TEST METHOD FOR ROSIN ACIDS IN FATTY ACIDS
  • ASTM D1241 : EN-Standard Specification for Materials for Soil-Aggregate Subbase Base and Surface Courses
  • ASTM D1242 : EN-STANDARD TEST METHODS FOR RESISTANCE OF PLASTIC MATERIALS TO ABRASION
  • ASTM D1242 REV A : EN-Standard Test Methods for Resistance of Plastic Materials to Abrasion
  • ASTM D1243 : EN-Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
  • ASTM D1244 : EN-Standard Practice for Designation of Yarn Construction
  • ASTM D1245 : EN-Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
  • ASTM D1246 : EN-STANDARD TEST METHOD FOR BROMIDE ION IN WATER (R 1995) (E1-1995)
  • ASTM D1246 REV A : EN-STANDARD TEST METHODS FOR IODIDE AND BROMIDE IN WATER
  • ASTM D1247 : EN-STANDARD METHOD OF SAMPLING MANUFACTURED GAS
  • ASTM D1248 : EN-Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
  • ASTM D1248 REV A : EN-Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
  • ASTM D1249 : EN-STANDARD SPECIFICATION FOR OCTYL ORTHO-PHTHALATE ESTER PLASTICIZERS (R 1988)
  • ASTM D1250 : EN-Standard Guide for Use of the Petroleum Measurement Tables
  • ASTM D1250 ADJ V1 : EN-Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume I Table 5A – Generalized Crude Oils Correction of Observed API Gravity to API Gravity at 60 Degrees F Tabl
  • ASTM D1250 ADJ V10 : EN-Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume X – Background Development and Program Documentation-Editorial Amplification; API Standard: API MPMS Ch.
  • ASTM D1250 ADJ V11/12 : EN-Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Intraconversion between Volume Measures and Density Measures Volume XI/XII Volume XI – Tables 1 2 3 4 8 9 10 11 12 13 and 14 Volu
  • ASTM D1250 ADJ V13 : EN-Standard Guide for Petroleum Measurement Tables Manual of Petroleum Measurement Standards Chapter 11.1 – Volume Correction Factors Volume XIII Table 5D – Generalized Lubricating Oils Correction of Observed API Gravit
  • ASTM D1250 ADJ V14 : EN-Standard Guide for Petroleum Measurement Tables Manual of Petroleum Measurement Standards Chapter 11.1 – Volume Correction Factors Volume XIV Table 53D – Generalized Lubricating Oils Correction of Observed Density to
  • ASTM D1250 ADJ V2 : EN-Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume II Table 5B – Generalized Products Correction of Observed API Gravity to API Gravity at 60 Degrees F Table
  • ASTM D1250 ADJ V3 : EN-Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume III Table 6C – Volume Correction Factors for Individual and Special Applications Volume Correction to 60 D
  • ASTM D1250 ADJ V4 : EN-Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume IV Table 23A – Generalized Crude Oils Correction of Observed Relative Density to Relative Density 60/60 De
  • ASTM D1250 ADJ V5 : EN-Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume V Table 23B – Generalized Products Correction of Observed Relative Density to Relative Density 60/60 Degre
  • ASTM D1250 ADJ V6 : EN-Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume VI Table 24C – Volume Correction Factors for Individual and Special Applications Volume Correction to 60 D
  • ASTM D1250 ADJ V7 : EN-Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume VII Table 53A – Generalized Crude Oils Correction of Observed Density to Density at 15 Degrees C Table 54A
  • ASTM D1250 ADJ V8 : EN-Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume VIII Table 53B – Generalized Products Correction of Observed Density to Density at 15 Degrees C Table 54B
  • ASTM D1250 ADJ V9 : EN-Standard Guide for Petroleum Measurement Tables Petroleum Measurement Tables Volume Correction Factors Volume IX Table 54C – Volume Correction Factors for Individual and Special Applications Volume Correction to 15 D
  • ASTM D1251 : EN-Standard Test Method for Water Vapor Permeability of Packages by Cycle Method
  • ASTM D1252 : EN-STANDARD TEST METHODS FOR CHEMICAL OXYGEN DEMAND (DICHROMATE OXYGEN DEMAND) OF WATER
  • ASTM D1253 : EN-STANDARD METHODS OF TEST FOR RESIDUAL CHLORINE IN WATER
  • ASTM D1257 : EN-Standard Specification for High-Gravity Glycerin
  • ASTM D1258 : EN-Standard Test Methods for High-Gravity Glycerin
  • ASTM D1259 : EN-Standard Test Methods for Nonvolatile Content of Resin Solutions
  • ASTM D126 : EN-Standard Test Methods for Analysis of Yellow Orange and Green Pigments Containing Lead Chromate and Chromium Oxide Green
  • ASTM D1261 : EN-Standard Test Method for Effect of Grease on Copper
  • ASTM D1263 : EN-STANDARD TEST METHOD FOR LEAKAGE TENDENCIES OF AUTOMOTIVE WHEEL BEARING GREASES (R 1981) (E1-1981)
  • ASTM D1264 : EN-Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
  • ASTM D1265 : EN-Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
  • ASTM D1265 REV A : EN-Standard Practice for Sampling Liquefied Petroleum (LP) Gases Manual Method
  • ASTM D1266 : EN-Standard Test Method for Sulfur in Petroleum Products (Lamp Method)-IP Designation: 107/86
  • ASTM D1267 : EN-Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
  • ASTM D127 : EN-Standard Test Method for Drop Melting Point of Petroleum Wax Including Petrolatum-IP Designation: 133/79(87); TAPPI T 634ts-64
  • ASTM D1272 : EN-Standard Specification for Pentachlorophenol
  • ASTM D1274 : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF PENTACHLOROPHENOL
  • ASTM D1275 : EN-STANDARD TEST METHOD FOR CORROSIVE SULFUR IN ELECTRICAL INSULATING OILS (IP 315/86)
  • ASTM D1275 REV A : EN-Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils-IP Designation: 315/86
  • ASTM D1278 : EN-STANDARD METHODS FOR RUBBER FROM NATURAL SOURCES – CHEMICAL ANALYSIS
  • ASTM D1278 REV A : EN-Standard Test Methods for Rubber from Natural Sources – Chemical Analysis
  • ASTM D1279 : EN-Standard Test Method for Buffering Action of Metal Cleaners
  • ASTM D128 : EN-Standard Test Methods for Analysis of Lubricating Grease
  • ASTM D128 REV A : EN-Standard Test Methods for Analysis of Lubricating Grease
  • ASTM D1280 : EN-STANDARD METHOD OF TOTAL IMMERSION CORROSION TEST FOR SOAK TANK METAL CLEANERS (R 1988)
  • ASTM D1281 : EN-STANDARD TEST METHOD FOR RINSING PROPERTIES OF METAL CLEANERS
  • ASTM D1282 : EN-Standard Test Method for Resistance to Airflow as an Indication of Average Fiber Diameter of Wool Top Card Silver and Scoured Wool
  • ASTM D1282 REV A : EN-STANDARD TEST METHOD FOR RESISTANCE TO AIRFLOW AS AN INDICATION OF AVERAGE FIBER DIAMETER OF WOOL TOP CARD SILVER AND SCOURED WOOL
  • ASTM D1283 : EN-Standard Test Method for Alkali-Soluability of Wools
  • ASTM D1284 : EN-STANDARD TEST METHODS FOR RELAXATION AND CONSOLIDATION DIMENSIONAL CHANGES OF STABILIZED KNIT WOOL FABRICS
  • ASTM D1287 : EN-Standard Test Method for pH of Engine Coolants and Antirusts
  • ASTM D129 : EN-STANDARD TEST METHOD FOR SULFUR IN PETROLEUM PRODUCTS (GENERAL BOMB METHOD) (BRITISH STANDARD 4454) (IP 61/65(75)) (R 1978)
  • ASTM D1290 : EN-Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
  • ASTM D1291 : EN-Standard Practice for Estimation of Chlorine Requirement or Demand of Water or Both
  • ASTM D1292 : EN-Standard Test Method for Odor in Water
  • ASTM D1293 : EN-Standard Test Methods for pH of Water
  • ASTM D1294 : EN-Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length
  • ASTM D1294 REV A : EN-STANDARD TEST METHOD FOR TENSILE STRENGTH AND BREAKING TENACITY OF WOOL FIBER BUNDLES 1-IN. (25.4-MM) GAGE LENGTH
  • ASTM D1296 : EN-STANDARD TEST METHOD FOR ODOR OF VOLATILE SOLVENTS AND DILUENTS (R 1988) (E1-1988)
  • ASTM D1298 : EN-Standard Test Method for Density Relative Density (Specific Gravity) or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-API Designation: MPMS Chapter 9.1; IP Designation 160/99
  • ASTM D1299 : EN-STANDARD TEST METHOD FOR SHRINKAGE OF MOLDED AND LAMINATED THERMOSETTING PLASTICS AT ELEVATED TEMPERATURE (R-1979) (E1-1991)
  • ASTM D13 : EN-Standard Specification for Spirits of Turpentine
  • ASTM D130 : EN-Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test-IP Designation: 154/93
  • ASTM D1301 : EN-STANDARD METHODS FOR CHEMICAL ANALYSIS OF WHITE LEAD PIGMENTS (R 1979)(E-1979)
  • ASTM D1303 : EN-TOTAL CHLORINE IN VINYL CHLORIDE POLYMERS AND COPOLYMERS TEST METHOD FOR (R 1979) (E1-1979)
  • ASTM D1304 : EN-STANDARD METHODS OF TESTING ADHESIVES RELATIVE TO THEIR USE AS ELECTRICAL INSULATION (R 1983)
  • ASTM D1305 : EN-Standard Specification for Electrical Insulating Paper and Paperboard – Sulfate (Kraft) Layer Type
  • ASTM D1306 : EN-Standard Test Method for Phthalic Anhydride Content of Alkyd Resins and Esters Containing Other Dibasic Acids (Gravimetric)
  • ASTM D1308 : EN-STANDARD TEST METHOD FOR EFFECT OF HOUSEHOLD CHEMICALS ON CLEAR AND PIGMENTED ORGANIC FINISHES (R 1981)(e1-1981)
  • ASTM D1309 : EN-STANDARD TEST METHOD FOR SETTLING PROPERTIES OF TRAFFIC PAINTS DURING STORAGE
  • ASTM D1310 : EN-Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
  • ASTM D1312 : EN-STANDARD TEST METHODS FOR APPARENT FREE PHENOLS IN SYNTHETIC PHENOLIC RESINS OR SOLUTIONS USED FOR COATING PURPOSES (R 1987) (E1-1987)
  • ASTM D1313 : EN-Standard Test Method for Sludge Formation in Mineral Transformer Oil by High-Pressure Oxidation Bomb
  • ASTM D1315 : EN-Standard Test Method for WATER IN INSULATING OILS BY EXTRACTION
  • ASTM D1316 : EN-Standard Test Method for Fineness of Grind of Printing Inks by the NPIRI Grindometer
  • ASTM D1317 : EN-Standard Test Method for Chlorine in New and Used Lubricants (Sodium Alcoholate Method)
  • ASTM D1318 : EN-Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)-Reinstated
  • ASTM D1319 : EN-Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption-IP Designation: 156/97
  • ASTM D1319 REV A : EN-Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption-IP Designation: 156/95
  • ASTM D1320 : EN-STANDARD TEST METHOD FOR TENSILE STRENGTH OF PARAFFIN WAX
  • ASTM D1321 : EN-Standard Test Method for Needle Penetration of Petroleum Waxes
  • ASTM D1321 REV A : EN-Standard Test Method for Needle Penetration of Petroleum Waxes
  • ASTM D1322 : EN-Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel (IP :57/96)
  • ASTM D1324 : EN-Standard Specification for Modified Wood
  • ASTM D1325 : EN-Standard Specification for Ammoniacal Copper Arsenate and Ammoniacal Copper Zinc Arsenate
  • ASTM D1325 REV A : EN-STANDARD SPECIFICATION FOR AMMONIACAL COPPER ARSENATE (R 1992) (E1-1992)
  • ASTM D1326 : EN-STANDARD METHODS FOR CHEMICAL ANALYSIS OF AMMONIACAL COPPER ARSENATE
  • ASTM D1327 : EN-Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
  • ASTM D1327 REV A : EN-Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
  • ASTM D1328 : EN-STANDARD TEST METHOD FOR STAINING PROPERTIES OF ASPHALT
  • ASTM D1329 : EN-STANDARD METHOD FOR EVALUATING RUBBER PROPERTY-RETRACTION AT LOWER TEMPERATURES (TR TEST)
  • ASTM D1330 : EN-Standard Specification for Rubber Sheet Gaskets
  • ASTM D1331 : EN-Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
  • ASTM D1334 : EN-Standard Test Method for Wool Content of Raw Wool – Commercial Scale
  • ASTM D1335 : EN-Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings-Discontinued November 1995 and Reinstated
  • ASTM D1336 : EN-Standard Test Method for Distortion of Yarn in Woven Fabrics
  • ASTM D1337 : EN-Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
  • ASTM D1338 : EN-Standard Test Method for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
  • ASTM D1339 : EN-STANDARD TEST METHODS FOR SULFITE ION IN WATER
  • ASTM D1342 : EN-Standard Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax
  • ASTM D1343 : EN-STANDARD TEST METHOD FOR VISCOSITY OF CELLULOSE DERIVATIVES BY BALL-DROP METHOD
  • ASTM D1344 : EN-STANDARD METHOD OF TESTING CROSS-LAP SPECIMENS FOR TENSILE PROPERTIES OF ADHESIVES
  • ASTM D1345 : EN-STANDARD TEST METHOD FOR EVALUATING ACUTE TOXICITY OF WATER TO FRESH-WATER FISHES
  • ASTM D1346 : EN-STANDARD METHODS OF TESTING ELECTRICAL INSULATING VARNISHES FOR 180 DEGREES C AND ABOVE (R 1979)(E1-1985)
  • ASTM D1347 : EN-Standard Test Methods for Methylcellulose
  • ASTM D1348 : EN-STANDARD TEST METHOD FOR MOISTURE IN CELLULOSE (R 1985)
  • ASTM D1349 : EN-Standard Practice for Rubber – Standard Temperatures for Testing
  • ASTM D1351 : EN-Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
  • ASTM D1352 : EN-STANDARD SPECIFICATION FOR OZONE-RESISTING BUTYL RUBBER INSULATION FOR WIRE AND CABLE
  • ASTM D1353 : EN-Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint Varnish Lacquer and Related Products
  • ASTM D1356 : EN-Standard Terminology Relating to Sampling and Analysis of Atmospheres
  • ASTM D1356 REV A : EN-Standard Terminology Relating to Sampling and Analysis of Atmospheres
  • ASTM D1357 : EN-Standard Practice for Planning the Sampling of the Ambient Atmosphere
  • ASTM D1358 : EN-STANDARD TEST METHOD FOR SPECTROPHOTOMETRIC DIENE VALUE OF DEHYDRATED CASTOR OIL AND ITS DERIVATIVES (R 1984)(E1-1984)
  • ASTM D1360 : EN-STANDARD TEST METHOD FOR FIRE RETARDANCY OF PAINTS (CABINET METHOD) (R 1984) (E1-1985)
  • ASTM D1360 REV A : EN-Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
  • ASTM D1363 : EN-STANDARD TEST METHOD FOR PERMANGANATE TIME OF ACETONE AND METHANOL
  • ASTM D1364 : EN-STANDARD TEST METHOD FOR WATER IN VOLATILE SOLVENTS (FISCHER REAGENT TITRATION METHOD)
  • ASTM D1366 : EN-STANDARD RECOMMENDED PRACTICE FOR REPORTING PARTICLE SIZE CHARACTERISTICS OF PIGMENTS (R 1981)(E1-1981)
  • ASTM D1367 : EN-Standard Test Method for Lubricating Qualities of Graphites
  • ASTM D1368 : EN-Standard Test Method for Trace Concentrations of Lead in Primary Reference Fuels
  • ASTM D1369 : EN-Standard Practice for Quantities of Materials for Bituminous Surface Treatments
  • ASTM D1370 : EN-Standard Test Method for Contact Compatibility between Asphaltic Materials (Oliensis Test)-E1
  • ASTM D1373 : EN-STANDARD SPECIFICATION FOR MEDIUM-VOLTAGE RUBBER INSULATING TAPE
  • ASTM D1374 : EN-STANDARD METHOD OF AERATED TOTAL IMMERSION CORROSION TEST FOR METAL CLEANERS (R 1986)(E1-1985)
  • ASTM D1382 : EN-STANDARD TEST METHOD FOR SUSCEPTIBILITY OF DRY ADHESIVE FILMS TO ATTACK BY ROACHES
  • ASTM D1383 : EN-STANDARD TEST METHOD FOR SUSCEPTIBILITY OF DRY ADHESIVE FILMS TO ATTACK BY LABORATORY RATS
  • ASTM D1384 : EN-Standard Test Method for Corrosion Test for Engine Coolants in Glassware
  • ASTM D1384 REV A : EN-Standard Test Method for Corrosion Test for Engine Coolants in Glassware
  • ASTM D1385 : EN-Standard Test Method for Hydrazine in Water
  • ASTM D1386 : EN-Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
  • ASTM D1387 : EN-STANDARD TEST METHOD FOR SAPONIFICATION NUMBER (EMPIRICAL) OF SYNTHETIC AND NATURAL WAXES
  • ASTM D1388 : EN-Standard Test Method for Stiffness of Fabrics
  • ASTM D1388 REV A : EN-Standard Test Method for Stiffness of Fabrics
  • ASTM D1389 : EN-Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
  • ASTM D1389 REV A : EN-Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
  • ASTM D139 : EN-Standard Test Method for Float Test for Bituminous Materials
  • ASTM D1390 : EN-STANDARD TEST METHOD FOR RUBBER PROPERTY – STRESS RELAXATION IN COMPRESSION
  • ASTM D1391 : EN-STANDARD TEST METHOD FOR MEASUREMENT OF ODOR IN ATMOSPHERES (DILUTION METHOD)
  • ASTM D1392 : EN-STANDARD SPECIFICATION FOR SAFFLOWER OIL (R 1981)(E1-1982)
  • ASTM D1394 : EN-Standard Test Methods for Chemical Analysis of White Titanium Pigments
  • ASTM D1395 : EN-STANDARD TEST METHOD FOR ABRASION RESISTANCE OF CLEAR FLOOR COATINGS
  • ASTM D1396 : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF POLY(VINYL BUTYRAL) (R 1987)
  • ASTM D1397 : EN-STANDARD TEST METHOD FOR UNSAPONIFIABLE MATTER IN ALKYD RESINS AND RESIN SOLUTIONS
  • ASTM D1398 : EN-STANDARD TEST METHOD FOR FATTY ACID CONTENT OF ALKYD RESINS AND ALKYD RESIN SOLUTIONS
  • ASTM D1399 : EN-STANDARD TEST METHOD FOR UNSAPONIFIABLE CONTENT OF TRICRESYL PHOSPHATE
  • ASTM D140 : EN-Standard Practice for Sampling Bituminous Materials
  • ASTM D140/D140M : EN-Standard Practice for Sampling Bituminous Materials
  • ASTM D1400 : EN-Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base
  • ASTM D1401 : EN-Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
  • ASTM D1403 : EN-Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
  • ASTM D1404 : EN-Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
  • ASTM D1404/D1404M : EN-Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
  • ASTM D1405 : EN-STANDARD TEST METHOD FOR ESTIMATION OF NET HEAT OF COMBUSTION OF AVIATION FUELS (IP DESIGNATION: 193/80)
  • ASTM D1405 REV A : EN-Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels-IP Designation: 193/80
  • ASTM D1405/D1405M : EN-Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
  • ASTM D1406 : EN-Standard Practice for Liquid Calibration of Tanks
  • ASTM D1407 : EN-Standard Practice for Measurement and Calibration of Barge Tanks
  • ASTM D1408 : EN-Standard Practice for Measurement and Calibration of Spherical and Spheroidal Tanks
  • ASTM D1409 : EN-Standard Practice for Measurement and Calibration of Tank Car Tanks (API Standard: 2554) (Available as Separate Reprint Only)
  • ASTM D1410 : EN-Standard Practice for Measurement and Calibration of Stationary Horizontal Tanks
  • ASTM D1411 : EN-Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes
  • ASTM D1412 : EN-Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 Degrees C
  • ASTM D1412 REV A : EN-Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 Degrees C
  • ASTM D1413 : EN-Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
  • ASTM D1413 REV B : EN-Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
  • ASTM D1414 : EN-Standard Test Methods for Rubber O-Rings
  • ASTM D1415 : EN-Standard Test Method for Rubber Property – International Hardness
  • ASTM D1416 : EN-Standard Test Methods for Rubber from Synthetic Sources – Chemical Analysis
  • ASTM D1417 : EN-Standard Test Methods for Rubber Latices – Synthetic
  • ASTM D1417 REV A : EN-Standard Test Methods for Rubber Latices – Synthetic
  • ASTM D1418 : EN-STANDARD PRACTICE FOR RUBBER AND RUBBER LATICES – NOMENCLATURE
  • ASTM D1418 REV A : EN-Standard Practice for Rubber and Rubber Latices – Nomenclature
  • ASTM D1422 : EN-Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method
  • ASTM D1423 : EN-Standard Test Method for Twist in Yarns by Direct-Counting
  • ASTM D1424 : EN-Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
  • ASTM D1424 REV A : EN-STANDARD TEST METHOD FOR TEARING STRENGTH OF FABRICS BY FALLING-PENDULUM TYPE (ELMENDORF) APPARATUS
  • ASTM D1425 : EN-STANDARD TEST METHOD FOR UNEVENNESS OF TEXTILE STRANDS USING ZELLWEGER USTER CAPACITANCE TESTING EQUIPMENT
  • ASTM D1425/D1425M : EN-Standard Test Method for Unevenness of Textile Strands Using Capacitance Testing Equipment
  • ASTM D1426 : EN-Standard Test Methods for Ammonia Nitrogen in Water
  • ASTM D1428 : EN-STANDARD TEST METHODS FOR SODIUM AND POTASSIUM IN WATER AND WATER-FORMED DEPOSITS BY FLAME PHOTOMETRY
  • ASTM D1429 : EN-STANDARD TEST METHODS FOR SPECIFIC GRAVITY OF WATER AND BRINE
  • ASTM D143 : EN-Standard Test Methods for Small Clear Specimens of Timber
  • ASTM D1430 : EN-STANDARD SPECIFICATION FOR POLYCHLOROTRIFLUORO- ETHYLENE (PCTFE) PLASTICS (R 1988)
  • ASTM D1430 REV A : EN-STANDARD SPECIFICATION FOR POLYCHLOROTRIFLUORO- ETHYLENE (PCTFE) PLASTICS
  • ASTM D1433 : EN-STANDARD TEST METHOD FOR RATE OF BURNING AND/OR EXTENT AND TIME OF BURNING OF FLEXIBLE THIN PLASTIC SHEETING SUPPORTED ON A 45-DEG INCLINE
  • ASTM D1434 : EN-Tentative Method of Test for Gas Transmission Rate of Plastic Sheeting-Originally Published
  • ASTM D1435 : EN-Standard Practice for Outdoor Weathering of Plastics
  • ASTM D1436 : EN-STANDARD METHODS FOR APPLICATION OF EMULSION FLOOR POLISHES TO SUBSTRATES FOR TESTING PURPOSES
  • ASTM D1439 : EN-Standard Test Methods for Sodium Carboxymethylcellulose
  • ASTM D1439 REV A : EN-STANDARD TEST METHODS FOR SODIUM CARBOXYMETHYLCELLULOSE (R 1989)
  • ASTM D1440 : EN-Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method)
  • ASTM D1441 : EN-Standard Practice for Sampling Cotton Fibers for Testing
  • ASTM D1442 : EN-Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)
  • ASTM D1445 : EN-STANDARD TEST METHOD FOR BREAKING STRENGTH AND ELONGATION OF COTTON FIBERS (FLAT BUNDLE METHOD)
  • ASTM D1447 : EN-Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
  • ASTM D1448 : EN-Standard Test Method for Micronaire Reading of Cotton Fibers
  • ASTM D1452 : EN-Standard Practice for Soil Investigation and Sampling by Auger Borings
  • ASTM D1452 REV A : EN-Standard Practice for Soil Investigation and Sampling by Auger Borings
  • ASTM D1455 : EN-Standard Test Method for 60 Degree Specular Gloss of Emulsion Floor Polish
  • ASTM D1456 : EN-Standard Test Method for Rubber Property – Elongation at Specific Stress
  • ASTM D1457 : EN-Standard Specification for Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
  • ASTM D1457 REV A : EN-STANDARD SPECIFICATION FOR POLYTETRAFLUOROETHYLENE (PTFE) MOLDING AND EXTRUSION MATERIALS
  • ASTM D1458 : EN-Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
  • ASTM D1459 : EN-STANDARD SPECIFICATION FOR SILICONE VARNISHED GLASS CLOTH AND TAPE FOR ELECTRICAL INSULATION
  • ASTM D146 : EN-Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
  • ASTM D146 REV A : EN-STANDARD METHODS OF SAMPLING AND TESTING BITUMEN-SATURATED FELTS AND WOVEN FABRICS FOR ROOFING AND WATERPROOFING (R 1986)
  • ASTM D1460 : EN-STANDARD TEST METHOD FOR RUBBER PROPERTY – CHANGE IN LENGTH DURING LIQUID IMMERSION
  • ASTM D1461 : EN-Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
  • ASTM D1462 : EN-STANDARD SPECIFICATION FOR REFINED SOYBEAN OIL
  • ASTM D1463 : EN-Standard Specification for Biaxially Oriented Styrene Plastics Sheet
  • ASTM D1464 : EN-Standard Test Method for Differential Dyeing Behavior of Cotton
  • ASTM D1465 : EN-Standard Test Method for Blocking and Picking Points of Petroleum Wax-TAPPI Suggested Method T 652
  • ASTM D1466 : EN-STANDARD METHOD OF SAMPLING LIQUID OILS FATTY ACIDS AND POLYMERIZED FATTY ACIDS COMMONLY USED IN PAINTS VARNISHES AND RELATED MATERIALS (R 1984)(E1-1984)
  • ASTM D1467 : EN-STANDARD METHODS OF TESTING FATTY ACIDS USED IN PROTECTIVE COATINGS (R 1981)(E1-1982)
  • ASTM D1468 : EN-Standard Test Method for Volatile Matter in Tricresyl Phosphate
  • ASTM D1469 : EN-STANDARD TEST METHOD FOR TOTAL ROSIN ACIDS CONTENT OF COATING VEHICLES (R 1988)
  • ASTM D147 : EN-STANDARD METHODS OF TESTING BITUMINOUS MASTICS GROUTS AND LIKE MIXTURES
  • ASTM D1473 : EN-STANDARD TEST METHOD FOR 26-DITERTIARY-BUTYL PARA-CRESOL IN ELECTRICAL INSULATING OILS
  • ASTM D1474 : EN-STANDARD TEST METHODS FOR INDENTATION HARDNESS OF ORGANIC COATINGS (R 1991)
  • ASTM D1475 : EN-Standard Test Method for Density of Paint Varnish Lacquer and Related Products
  • ASTM D1476 : EN-Standard Test Method for Heptane Miscibility of Lacquer Solvents
  • ASTM D1478 : EN-STANDARD TEST METHOD FOR LOW-TEMPERATURE TORQUE OF BALL BEARING GREASES (R 1985)
  • ASTM D1479 : EN-STANDARD TEST METHOD FOR EMULSION STABILITY OF SOLUBLE CUTTING OILS
  • ASTM D1480 : EN-STANDARD TEST METHOD FOR DENSITY AND RELATIVE DENSITY (SPECIFIC GRAVITY) OF VISCOUS MATERIALS BY BINGHAM PYCNOMETER
  • ASTM D1481 : EN-STANDARD TEST METHOD FOR DENSITY AND RELATIVE DENSITY (SPECIFIC GRAVITY) OF VISCOUS MATERIALS BY LIPKIN BICAPILLARY PYCNOMETER
  • ASTM D1483 : EN-Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method
  • ASTM D1485 : EN-Standard Test Methods for Rubber from Natural Sources – Sampling and Sample Preparation
  • ASTM D1488 : EN-STANDARD TEST METHOD FOR AMYLACEOUS MATTER IN ADHESIVES
  • ASTM D1489 : EN-Standard Test Method for Nonvolatile Content of Aqueous Adhesives
  • ASTM D149 : EN-STANDARD TEST METHOD FOR DIELECTRIC BREAKDOWN VOLTAGE AND DIELECTRIC STRENGTH OF SOLID ELECTRICAL INSULATING MATERIALS AT COMMERCIAL POWER FREQUENCIES
  • ASTM D149 REV A : EN-Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
  • ASTM D1490 : EN-Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
  • ASTM D1491 : EN-STANDARD TEST METHOD FOR BROMINE INDEX OF AROMATIC HYDROCARBONS BY POTENTIOMETRIC TITRATION
  • ASTM D1492 : EN-Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
  • ASTM D1493 : EN-Standard Test Method for Solidification Point of Industrial Organic Chemicals
  • ASTM D1494 : EN-STANDARD TEST METHOD FOR DIFFUSE LIGHT TRANSMISSION FACTOR OF REINFORCED PLASTICS PANELS
  • ASTM D1498 : EN-Standard Test Method for Oxidation-Reduction Potential of Water
  • ASTM D1499 : EN-STANDARD PRACTICE FOR OPERATING LIGHT- AND WATER-EXPOSURE APPARATUS (CARBON-ARC TYPE) FOR EXPOSURE OF PLASTICS
  • ASTM D1499 REV A : EN-Standard Practice for Operating Light- and Water-Exposure Apparatus (Carbon-Arc Type) for Exposure of Plastics
  • ASTM D150 : EN-Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ASTM D1500 : EN-STANDARD TEST METHOD FOR ASTM COLOR OF PETROLEUM PRODUCTS (ASTM COLOR SCALE) (IP 196/86)
  • ASTM D1500 REV A : EN-Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)-IP Designation: 196/97
  • ASTM D1501 : EN-Standard Recommended Practice for EXPOSURE OF PLASTICS TO FLUORESCENT SUNLAMP
  • ASTM D1503 : EN-STANDARD SPECIFICATION FOR CELLULOSE ACETATE BUTYRATE (CAB) PLASTIC PIPE SCHEDULE 40
  • ASTM D1504 : EN-STANDARD RECOMMENDED PRACTICE FOR DETERMINING ORIENTATION RELEASE STRESS OF PLASTIC SHEETING
  • ASTM D1505 : EN-Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D1506 : EN-STANDARD TEST METHOD FOR CARBON BLACK – ASH CONTENT
  • ASTM D1506 REV A : EN-STANDARD TEST METHOD FOR CARBON BLACK – ASH CONTENT
  • ASTM D1506 REV B : EN-STANDARD TEST METHODS FOR CARBON BLACK – ASH CONTENT
  • ASTM D1507 : EN-Tentative Method ofTest for ATTRITION OF PELLETED CARBON BLACK
  • ASTM D1508 : EN-Standard Test Method for Carbon Black Pelleted Fines and Attrition
  • ASTM D1509 : EN-STANDARD TEST METHOD FOR CARBON BLACK – HEATING LOSS
  • ASTM D1509 REV A : EN-STANDARD TEST METHODS FOR CARBON BLACK – HEATING LOSS
  • ASTM D1510 : EN-STANDARD TEST METHOD FOR CARBON BLACK – IODINE ADSORPTION NUMBER (E1-1987)
  • ASTM D1510 REV A : EN-Standard Test Method for Carbon Black-Iodine Adsorption Number
  • ASTM D1510 REV B : EN-Standard Test Method for Carbon Black – Iodine Adsorption Number
  • ASTM D1510 REV C : EN-Standard Test Method for Carbon Black-Iodine Adsorption Number
  • ASTM D1511 : EN-Standard Test Method for Carbon BlackPellet Size Distribution
  • ASTM D1511 REV A : EN-STANDARD TEST METHOD FOR CARBON BLACK – PELLET SIZE DISTRIBUTION
  • ASTM D1511 REV B : EN-Standard Test Method for Carbon Black – Pellet Size Distribution
  • ASTM D1512 : EN-STANDARD TEST METHODS FOR CARBON BLACK – PH VALUE
  • ASTM D1513 : EN-Standard Test Method for Carbon Black Pelleted-Pour Density
  • ASTM D1513 REV A : EN-Standard Test Method for Carbon Black Pelleted – Pour Density
  • ASTM D1514 : EN-Standard Test Method for Carbon Black – Sieve Residue
  • ASTM D1514 REV A : EN-STANDARD TEST METHOD FOR CARBON BLACK – SIEVE RESIDUE
  • ASTM D1516 : EN-Standard Test Method for Width of Leather
  • ASTM D1517 : EN-Standard Terminololgy Relating to Leather
  • ASTM D1518 : EN-Standard Test Method for Thermal Transmittance of Textile Materials
  • ASTM D1519 : EN-Standard Test Method for Rubber Chemicals – Melting Range
  • ASTM D1523 : EN-STANDARD SPECIFICATION FOR SYNTHETIC RUBBER INSULATION FOR WIRE AND CABLE 90 DEGREES C OPERATION
  • ASTM D1524 : EN-Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field
  • ASTM D1525 : EN-STANDARD TEST METHOD FOR VICAT SOFTENING TEMPERATURE OF PLASTICS
  • ASTM D1525 REV A : EN-Standard Test Method for Vicat Softening Temperature of Plastics
  • ASTM D1527 : EN-Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Schedules 40 and 80
  • ASTM D1527 REV A : EN-Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Schedules 40 and 80
  • ASTM D153 : EN-Standard Test Methods for Specific Gravity of Pigments
  • ASTM D1531 : EN-STANDARD TEST METHOD FOR RELATIVE PERMITTIVITY (DIELECTRIC CONSTANT) AND DISSIPATION FACTOR OF POLYETHYLENE BY LIQUID DISPLACEMENT PROCEDURE
  • ASTM D1532 : EN-STANDARD SPECIFICATION FOR POLYESTER GLASS-MAT SHEET LAMINATE
  • ASTM D1533 : EN-STANDARD TEST METHODS FOR WATER IN INSULATING LIQUIDS (KARL FISCHER REACTION METHOD)
  • ASTM D1534 : EN-Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
  • ASTM D1535 : EN-Standard Practice for Specifying Color by the Munsell System
  • ASTM D1535 REV A : EN-STANDARD PRACTICE FOR SPECIFYING COLOR BY THE MUNSELL SYSTEM
  • ASTM D1537 : EN-Standard Specification for Distilled Soybean Fatty Acids
  • ASTM D1538 : EN-Standard Specification for Distilled Linseed Fatty Acids
  • ASTM D1539 : EN-Standard Specification for Dehydrated Castor Acids
  • ASTM D154 : EN-Standard Guide for Testing Varnishes
  • ASTM D1540 : EN-STANDARD PRACTICE FOR EFFECT OF CHEMICAL AGENTS ON ORGANIC FINISHES USED IN THE TRANSPORTATION INDUSTRY
  • ASTM D1541 : EN-Standard Test Method for Total Iodine Value of Drying Oils and Their Derivatives
  • ASTM D1542 : EN-Standard Test Method for Qualitative Detection of Rosin in Varnishes
  • ASTM D1543 : EN-STANDARD TEST METHOD FOR COLOR PERMANENCE OF WHITE ARCHITECTURAL ENAMELS (R 1981)(E1-1981)
  • ASTM D1544 : EN-Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
  • ASTM D1545 : EN-Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
  • ASTM D1546 : EN-STANDARD METHOD FOR PERFORMANCE TESTS OF CLEAR FLOOR SEALERS (R 1993) (E1-1993)
  • ASTM D1547 : EN-STANDARD SPECIFICATION FOR EXTRUDED ACRYLIC PLASTIC SHEET (DISCONTINUED)
  • ASTM D1548 : EN-STANDARD TEST METHOD FOR VANADIUM IN HEAVY FUEL OIL
  • ASTM D1549 : EN-STANDARD TEST METHOD FOR ZINC IN LUBRICATING OILS AND ADDITIVES (POLAROGRAPHIC METHOD)
  • ASTM D1550 : EN-Standard ASTM Butadiene Measurement Tables
  • ASTM D1551 : EN-Standard Method of Test for SULFUR IN PETROLEUM OILS (QUARTZ-TUBE METHOD)
  • ASTM D1552 : EN-Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
  • ASTM D1553 : EN-STANDARD METHODS FOR ANALYSIS OF GRAPHITES USED AS LUBRICANTS
  • ASTM D1554 : EN-Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials
  • ASTM D1555 : EN-Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
  • ASTM D1555 REV A : EN-Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
  • ASTM D1555M : EN-Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
  • ASTM D1555M REV A : EN-Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
  • ASTM D1556 : EN-Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
  • ASTM D1557 : EN-Test Method for Laboratory Compaction Characteristics of Soil Using Modified Effort (5600 ft-lbf/ft3 (2700 kN-m/m3))
  • ASTM D1558 : EN-Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
  • ASTM D1559 : EN-Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus-Discontinued 1985; No Replacement
  • ASTM D156 : EN-Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
  • ASTM D156 REV A : EN-Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
  • ASTM D1560 : EN-Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1560 REV A : EN-Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1561 : EN-Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
  • ASTM D1561 REV A : EN-STANDARD METHOD FOR PREPARATION OF BITUMINOUS MIXTURE TEST SPECIMENS BY MEANS OF CALIFORNIA KNEADING COMPACTOR
  • ASTM D1562 : EN-Standard Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds
  • ASTM D1563 : EN-STANDARD TEST METHOD FOR PEROXIDE NUMBER OF MINERAL INSULATING OILS
  • ASTM D1565 : EN-Standard Specification for Flexible Cellular Materials – Vinyl Chloride Polymers and Copolymers (Open-Cell Foam)
  • ASTM D1566 : EN-STANDARD TERMINOLOGY RELATING TO RUBBER
  • ASTM D1566 REV A : EN-Standard Terminology Relating to Rubber
  • ASTM D1566 REV B : EN-STANDARD TERMINOLOGY RELATING TO RUBBER
  • ASTM D1566 REV C : EN-Standard Terminology Relating to Rubber
  • ASTM D1566 REV D : EN-STANDARD TERMINOLOGY RELATING TO RUBBER
  • ASTM D1567 : EN-Standard Test Method for Detergent Cleaners for Evaluation of Corrosive Effects on Certain Porcelain Enamels
  • ASTM D1568 : EN-Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates
  • ASTM D1569 : EN-Standard Test Methods for Detergent Alkylate
  • ASTM D1570 : EN-Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
  • ASTM D1571 : EN-Standard Specification for Woven Asbestos Cloth
  • ASTM D1571/D1571M : EN-Standard Specification for Woven Asbestos Cloth
  • ASTM D1573 : EN-Standard Test Method for Heat Aging of Asbestos Textiles
  • ASTM D1573/D1573M : EN-Standard Test Method for Heat Aging of Asbestos Textiles
  • ASTM D1574 : EN-STANDARD TEST METHOD FOR EXTRACTABLE MATTER IN WOOL AND OTHER ANIMAL FIBERS
  • ASTM D1575 : EN-STANDARD TEST METHOD FOR FIBER LENGTH OF WOOL IN SCOURED WOOL AND IN CARD SLIVER
  • ASTM D1576 : EN-Standard Test Method for Moisture in Wool by Oven-Drying
  • ASTM D1577 : EN-Standard Test Methods for Linear Density of Textile Fibers
  • ASTM D1578 : EN-Standard Test Method for Breaking Strength of Yarn in Skein Form
  • ASTM D1579 : EN-STANDARD TEST METHOD FOR FILLER CONTENT OF PHENOL RESORCINOL AND MELAMINE ADHESIVES
  • ASTM D1580 : EN-STANDARD SPECIFICATION FOR LIQUID ADHESIVES FOR AUTOMATIC MACHINE LABELING OF GLASS BOTTLES (R 1984)
  • ASTM D1581 : EN-STANDARD TEST METHOD FOR BONDING PERMANENCY OF WATER- OR SOLVENT-SOLUBLE LIQUID ADHESIVES FOR LABELING GLASS BOTTLES
  • ASTM D1582 : EN-Standard Test Method for Nonvolatile Content of Liquid Phenol Resorcinol and Melamine Adhesives
  • ASTM D1582 REV A : EN-STANDARD TEST METHOD FOR NONVOLATILE CONTENT OF LIQUID PHENOL RESORCINOL AND MELAMINE ADHESIVES
  • ASTM D1583 : EN-STANDARD TEST METHOD FOR HYDROGEN ION CONCENTRATION OF DRY ADHESIVE FILMS
  • ASTM D1585 : EN-Standard Test Methods for Fatty Acids Content of Naval Stores Including Rosin Tall Oil and Related Products
  • ASTM D1586 : EN-Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils
  • ASTM D1586 REV A : EN-Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
  • ASTM D1587 : EN-Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
  • ASTM D1590 : EN-Standard Test Method for Surface Tension of Water
  • ASTM D1593 : EN-STANDARD SPECIFICATION FOR NONRIGID VINYL CHLORIDE PLASTIC SHEETING
  • ASTM D1596 : EN-Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
  • ASTM D1596 REV A : EN-STANDARD TEST METHOD FOR SHOCK ABSORBING CHARACTERISTICS OF PACKAGE CUSHIONING MATERIALS (R 1983) (E1-1983;E2-1988)
  • ASTM D1598 : EN-Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
  • ASTM D1599 : EN-Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe Tubing and Fittings
  • ASTM D16 : EN-Standard Terminology for Paint Related Coatings Materials and Applications
  • ASTM D16 REV A : EN-STANDARD TERMINOLOGY RELATING TO PAINT VARNISH LACQUER AND RELATED PRODUCTS
  • ASTM D16 REV B : EN-Standard Terminology for Paint Related Coatings Materials and Applications
  • ASTM D1600 : EN-Standard Terminology for Abbreviated Terms Relating to Plastics
  • ASTM D1600 REV A : EN-STANDARD TERMINOLOGY FOR ABBREVIATED TERMS RELATING TO PLASTICS
  • ASTM D1600 REV B : EN-STANDARD TERMINOLOGY FOR ABBREVIATED TERMS RELATING TO PLASTICS
  • ASTM D1600 REV C : EN-Standard Terminology for Abbreviated Terms Relating to Plastics
  • ASTM D1601 : EN-Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
  • ASTM D1602 : EN-STANDARD TEST METHOD FOR BEARING LOAD OF CORRUGATED REINFORCED PLASTICS PANELS
  • ASTM D1603 : EN-Standard Test Method for Carbon Black in Olefin Plastics
  • ASTM D1605 : EN-STANDARD PRACTICES FOR SAMPLING ATMOSPHERES FOR ANALYSIS OF GASES AND VAPORS
  • ASTM D1607 : EN-STANDARD TEST METHOD FOR NITROGEN DIOXIDE CONTENT OF THE ATMOSPHERE (GRIESS-SALTZMAN REACTION) (E1-1979)
  • ASTM D1608 : EN-Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures)
  • ASTM D1610 : EN-STANDARD PRACTICE FOR CONDITIONING LEATHER AND LEATHER PRODUCTS FOR TESTING
  • ASTM D1611 : EN-Standard Test Method for Corrosion Produced by Leather in Contact with Metal
  • ASTM D1612 : EN-STANDARD TEST METHOD FOR ACETONE IN METHYL ALCOHOL (METHANOL)
  • ASTM D1613 : EN-STANDARD TEST METHOD FOR ACIDITY IN VOLATILE SOLVENTS AND CHEMICAL INTERMEDIATES USED IN PAINT VARNISH LACQUER AND RELATED PRODUCTS
  • ASTM D1614 : EN-Standard Test Method for Alkalinity in Acetone
  • ASTM D1615 : EN-Standard Test Methods for Glycerol Ethylene Glycol and Pentaerythritol in Alkyd Resins
  • ASTM D1617 : EN-STANDARD TEST METHOD FOR ESTER VALUE OF SOLVENTS AND THINNERS
  • ASTM D1618 : EN-STANDARD TEST METHOD FOR CARBON BLACK EXTRACTABLES – TOLUENE DISCOLORATION
  • ASTM D1618 REV A : EN-Standard Test Method for Carbon Black Extractables – Toluene Discoloration
  • ASTM D1619 : EN-Standard Test Methods for Carbon Black – Sulfur Content
  • ASTM D1619 REV A : EN-STANDARD TEST METHODS FOR CARBON BLACK – SULFUR CONTENT
  • ASTM D1621 : EN-Standard Test Method for Compressive Properties of Rigid Cellular Plastics
  • ASTM D1621 REV A : EN-Standard Test Method for Compressive Properties Of Rigid Cellular Plastics
  • ASTM D1622 : EN-STANDARD TEST METHOD FOR APPARENT DENSITY OF RIGID CELLULAR PLASTICS
  • ASTM D1623 : EN-Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
  • ASTM D1624 : EN-Standard Specification for Acid Copper Chromate
  • ASTM D1625 : EN-Standard Specification for Chromated Copper Arsenate
  • ASTM D1627 : EN-Standard Test Methods for Chemical Analysis of Acid Copper Chromate
  • ASTM D1628 : EN-STANDARD METHODS FOR CHEMICAL ANALYSIS OF CHROMATED COPPER ARSENATE
  • ASTM D1630 : EN-Standard Test Method for Rubber Property – Abrasion Resistance (Footwear Abrader)
  • ASTM D1631 : EN-Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
  • ASTM D1632 : EN-Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
  • ASTM D1633 : EN-Standard Test Method for Compressive Strength of Molded Soil-Cement Cylinders
  • ASTM D1634 : EN-Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
  • ASTM D1635 : EN-STANDARD TEST METHOD FOR FLEXURAL STRENGTH OF SOIL-CEMENT USING SIMPLE BEAM WITH THIRD-POINT LOADING
  • ASTM D1636 : EN-Standard Specification for Allyl Molding Compounds
  • ASTM D1637 : EN-STANDARD TEST METHOD FOR TENSILE HEAT DISTORTION TEMPERATURE OF PLASTIC SHEETING
  • ASTM D1638 : EN-STANDARD METHODS OF TESTING URETHANE FOAM ISOCYANATE RAW MATERIALS
  • ASTM D1639 : EN-Standard Test Method for Acid Value of Organic Coating Materials
  • ASTM D1640 : EN-STANDARD TEST METHODS FOR DRYING CURING OR FILM FORMATION OF ORGANIC COATINGS AT ROOM TEMPERATURE (R 1989) (E1-1989)
  • ASTM D1641 : EN-Standard Practice for Conducting Outdoor Exposure Tests of Varnishes
  • ASTM D1642 : EN-STANDARD TEST METHODS FOR ELASTICITY OR TOUGHNESS OF VARNISHES (R 1987)
  • ASTM D1643 : EN-STANDARD TEST METHODS FOR GAS CHECKING AND DRAFT TEST OF VARNISH FILMS
  • ASTM D1644 : EN-Standard Test Methods for Nonvolatile Content of Varnishes-Reinstated
  • ASTM D1646 : EN-STANDARD TEST METHOD FOR RUBBER – VISCOSITY AND VULCANIZATION CHARACTERISTICS (MOONEY VISCOMETER)
  • ASTM D1646 REV A : EN-STANDARD TEST METHODS FOR RUBBER – VISCOSITY STRESS RELAXATION AND PRE-VULCANIZATION CHARACTERISTICS (MOONEY VISCOMETER)
  • ASTM D1646 REV B : EN-STANDARD TEST METHODS FOR RUBBER – VISCOSITY STRESS RELAXATION AND PRE-VULCANIZATION CHARACTERISTICS (MOONEY VISCOMETER)
  • ASTM D1647 : EN-STANDARD TEST METHODS FOR RESISTANCE OF DRIED FILMS OF VARNISHES TO WATER AND ALKALI
  • ASTM D1648 : EN-Standard Specification for Basic Lead Silicochromate Pigment
  • ASTM D1649 : EN-Standard Specification for Strontium Chromate Pigment
  • ASTM D165 : EN-Standard Method of Test for PROPORTION OF BITUMEN SOLUBLE IN CARBON TETRACHLORIDE
  • ASTM D1650 : EN-STANDARD METHODS OF SAMPLING AND TESTING SHELLAC VARNISH (R 1981)
  • ASTM D1652 : EN-Standard Test Methods for Epoxy Content of Epoxy Resins
  • ASTM D1653 : EN-Standard Test Methods for Water Vapor Transmission of Organic Coating Films
  • ASTM D1653 REV A : EN-STANDARD TEST METHODS FOR WATER VAPOR TRANSMISSION OF ORGANIC COATING FILMS
  • ASTM D1654 : EN-Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
  • ASTM D1654 REV A : EN-STANDARD METHOD FOR EVALUATION OF PAINTED OR COATED SPECIMENS SUBJECTED TO CORROSIVE ENVIRONMENTS (R-1984) (E1-1984)
  • ASTM D1655 : EN-Standard Specification for Aviation Turbine Fuels
  • ASTM D1655 REV A : EN-STANDARD SPECIFICATION FOR AVIATION TURBINE FUELS
  • ASTM D1655 REV B : EN-Standard Specification for Aviation Turbine Fuels
  • ASTM D1655 REV C : EN-Standard Specification for Aviation Turbine Fuels
  • ASTM D1657 : EN-Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D1658 : EN-STANDARD TEST METHOD FOR CARBON NUMBER DISTRIBUTION OF AROMATIC COMPOUNDS IN NAPHTHAS BY MASS SPECTROMETRY
  • ASTM D1659 : EN-STANDARD TEST METHOD FOR MAXIMUM FLUIDITY TEMPERATURE OF RESIDUAL FUEL OIL
  • ASTM D1660 : EN-STANDARD TEST METHOD FOR THERMAL STABILITY OF AVIATION TURBINE FUELS
  • ASTM D1661 : EN-STANDARD TEST METHOD FOR THERMAL STABILITY OF U.S. NAVY SPECIAL FUEL OIL
  • ASTM D1662 : EN-Standard Test Method for Active Sulfur in Cutting Oils
  • ASTM D1664 : EN-Standard Test Method for Coating and Stripping of Bitumen-Aggregate Mixtures
  • ASTM D1665 : EN-Standard Test Method for Engler Specific Viscosity of Tar Products
  • ASTM D1666 : EN-Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials
  • ASTM D1667 : EN-Standard Specification for Flexible Cellular Materials – Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam)
  • ASTM D1668 : EN-STANDARD SPECIFICATION FOR GLASS FABRICS (WOVEN TREATED) FOR ROOFING AND WATERPROOFING
  • ASTM D1668 REV A : EN-Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing
  • ASTM D1669 : EN-STANDARD PRACTICE FOR PREPARATION OF TEST PANELS FOR ACCELERATED AND OUTDOOR WEATHERING OF BITUMINOUS COATINGS (E1-1988)
  • ASTM D167 : EN-Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
  • ASTM D1670 : EN-Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
  • ASTM D1672 : EN-Standard Recommended Practice for Exposure of Polymeric Materials to High-Energy Radiation
  • ASTM D1673 : EN-STANDARD TEST METHODS FOR RELATIVE PERMITTIVITY AND DISSIPATION FACTOR OF EXPANDED CELLULAR PLASTICS USED FOR ELECTRICAL INSULATION (R 1989)
  • ASTM D1674 : EN-STANDARD METHODS OF TESTING POLYMERIZABLE EMBEDDING COMPOUNDS USED FOR ELECTRICAL INSULATION
  • ASTM D1675 : EN-STANDARD METHODS OF TESTING POLYTETRAFLUOROETHYLENE TUBING
  • ASTM D1676 : EN-Standard Test Methods for Film-Insulated Magnet Wire
  • ASTM D1676 REV A : EN-STANDARD TEST METHODS FOR FILM-INSULATED MAGNET WIRE
  • ASTM D1677 : EN-STANDARD METHODS FOR SAMPLING AND TESTING UNTREATED MICA PAPER USED FOR ELECTRICAL INSULATION (E1-1980)
  • ASTM D1679 : EN-Standard Specification for Synthetic Rubber Heat-and Moisture-Resisting Insulation for Wire and Cable 75 Degrees C Operation
  • ASTM D168 : EN-STANDARD TEST METHOD FOR COKE RESIDUE OF CREOSOTE (AASHTO NO. 61)
  • ASTM D1680 : EN-STANDARD METHODS OF TESTING RUBBER HOSE FOR AUTOMOTIVE AIR CONDITIONING SYSTEMS
  • ASTM D1681 : EN-STANDARD TEST METHOD FOR SYNTHETIC ANIONIC ACTIVE INGREDIENT IN DETERGENTS BY CATIONIC TITRATION PROCEDURE
  • ASTM D1682 : EN-STANDARD TEST METHODS FOR BREAKING LOAD AND ELONGATION OF TEXTILE FABRICS
  • ASTM D1683 : EN-Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics-(Reinstated)
  • ASTM D1683 REV A : EN-Standard Test Method for Failure in Sewn Seams of Woven Fabrics-Discontinued 1999; No Replacement
  • ASTM D1684 : EN-Standard Practice for Lighting Cotton Classing Rooms for Color Grading
  • ASTM D1685 : EN-STANDARD TEST METHOD FOR TRACES OF THIOPHENE IN BENZENE BY SPECTROPHOMETRY
  • ASTM D1686 : EN-STANDARD TEST METHOD FOR COLOR OF SOLID AROMATIC HYDROCARBONS AND RELATED MATERIALS IN THE MOLTEN STATE (PLATINUM-COBALT SCALE) (R 1990)
  • ASTM D1687 : EN-Standard Test Methods for Chromium in Water
  • ASTM D1688 : EN-STANDARD TEST METHODS FOR COPPER IN WATER
  • ASTM D1691 : EN-STANDARD TEST METHODS FOR ZINC IN WATER
  • ASTM D1692 : EN-Method of Test for Rate of Burning or Extent and Time of Burning of Cellular Plastics Using a Specimen Horizontal
  • ASTM D1693 : EN-Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
  • ASTM D1693 REV A : EN-Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
  • ASTM D1694 : EN-Standard Specification for Threads 60 Degrees (Stub) for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D1695 : EN-Standard Terminology of Cellulose and Cellulose Derivatives
  • ASTM D1696 : EN-Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
  • ASTM D1698 : EN-Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
  • ASTM D1701 : EN-STANDARD TEST METHODS FOR SCAVENGER CONTENT OF ASKARELS (R 1989)
  • ASTM D1702 : EN-STANDARD METHOD FOR VISUAL EXAMINATION OF USED CHLORINATED AROMATIC HYDROCARBONS (ASKARELS) IN THE FIELD
  • ASTM D1704 : EN-STANDARD TEST METHOD FOR DETERMINING THE AMOUNT OF PARTICULATE MATTER IN THE ATMOSPHERE BY MEASUREMENT OF THE ABSORBANCE OF A FILTERED SAMPLE
  • ASTM D1704/D1704M : EN-Standard Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filtered Sample
  • ASTM D1704M : EN-STANDARD TEST METHOD FOR DETERMINING THE AMOUNT OF PARTICULATE MATTER IN THE ATMOSPHERE BY MEASUREMENT OF THE LIGHT ABSORBANCE OF A FILTER SAMPLE (METRIC)
  • ASTM D1705 : EN-STANDARD TEST METHOD FOR PARTICLE SIZE ANALYSIS OF POWDERED POLYMERS AND COPOLYMERS OF VINYL CHLORIDE
  • ASTM D1708 : EN-STANDARD TEST METHOD FOR TENSILE PROPERTIES OF PLASTICS BY USE OF MICROTENSILE SPECIMENS
  • ASTM D1708 REV A : EN-Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
  • ASTM D1709 : EN-Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
  • ASTM D1710 : EN-Standard Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy Walled Tubing
  • ASTM D1710 REV A : EN-STANDARD SPECIFICATION FOR POLYTETRAFLUOROETHYLENE (PTFE) BASIC SHAPES ROD AND HEAVY-WALLED TUBING
  • ASTM D1711 : EN-Standard Terminology Relating to Electrical Insulation
  • ASTM D1711 REV A : EN-STANDARD TERMINOLOGY RELATING TO ELECTRICAL INSULATION
  • ASTM D1711 REV B : EN-STANDARD TERMINOLOGY RELATING TO ELECTRICAL INSULATION
  • ASTM D1712 : EN-Standard Practice for Resistance of Plastics to Sulfide Staining
  • ASTM D1713 : EN-STANDARD TEST METHOD FOR BONDING PERMANENCY OF WATER- OR SOLVENT-SOLUBLE LIQUID ADHESIVES FOR AUTOMATIC MACHINE SEALING TOP FLAPS OF FIBERBOARD SPECIMENS
  • ASTM D1714 : EN-STANDARD TEST METHOD FOR WATER ABSORPTIVENESS OF FIBERBOARD SPECIMENS FOR ADHESIVES
  • ASTM D1715 : EN-Tentative Method of Test for Gas Evolved from Chemical Blowing Agents for Cellular Plastics
  • ASTM D1716 : EN-STANDARD TEST METHOD FOR CELLULOSE CHAIN LENGHT UNIFORMITY BY FRACTIONAL PRECIPITATION OF CELLULISE NITRATE
  • ASTM D1718 : EN-Standard Specification for Isobutyl Acetate (95% Grade)
  • ASTM D1719 : EN-STANDARD SPECIFICATION FOR ISOBUTYL ALCOHOL
  • ASTM D1720 : EN-Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
  • ASTM D1721 : EN-STANDARD TEST METHOD FOR PERMANGANATE TIME OF TRICRESYL PHOSPHATE (R 1988)
  • ASTM D1722 : EN-Standard Test Method for Water Miscibility of Water-Soluble Solvents
  • ASTM D1725 : EN-Standard Test Method for Viscosity of Resin Solutions
  • ASTM D1726 : EN-STANDARD TEST METHOD FOR HYDROLYZABLE CHLORINE CONTENT OF LIQUID EPOXY RESINS
  • ASTM D1728 : EN-STANDARD TEST METHOD FOR PHTHALATE ESTER COLOR OF HIGH-GRAVITY GLYCERIN
  • ASTM D1729 : EN-Standard Practice for Visual Evaluation of Color Differences of Opaque Materials
  • ASTM D173 : EN-STANDARD SPECIFICATION FOR BITUMEN-SATURATED COTTON FABRICS USED IN ROOFING AND WATERPROOFING (E1-1990)
  • ASTM D173 REV B : EN-Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
  • ASTM D1730 : EN-Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
  • ASTM D1731 : EN-Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
  • ASTM D1732 : EN-Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
  • ASTM D1734 : EN-STANDARD METHOD OF MAKING AND PREPARING CONCRETE AND MASONRY PANELS FOR TESTING PAINT FINISHES (R 1980)
  • ASTM D1735 : EN-STANDARD METHOD FOR WATER FOG TESTING OF ORGANIC COATINGS (R 1980) (E1-1980)
  • ASTM D1735 REV A : EN-STANDARD PRACTICE FOR TESTING WATER RESISTANCE OF COATINGS USING WATER FOG APPARATUS
  • ASTM D1736 : EN-STANDARD TEST METHOD FOR EFFLORESCENCE OF INTERIOR WALL PAINTS (R 1984) (E1-1984)
  • ASTM D1737 : EN-STANDARD TEST METHOD FOR ELONGATION OF ATTACHED ORGANIC COATINGS WITH CYLINDRICAL MANDREL APPARATUS
  • ASTM D1739 : EN-STANDARD TEST METHOD FOR COLLECTION AND MEASUREMENT OF DUSTFALL (SETTLEABLE PARTICULATE MATTER) (R 1993)
  • ASTM D1740 : EN-Standard Test Method for Luminometer Numbers of Aviation Turbine Fuels
  • ASTM D1741 : EN-STANDARD TEST METHOD FOR FUNCTIONAL LIFE OF BALL BEARING GREASES (R 1981) (E1-1981)
  • ASTM D1742 : EN-Standard Test Method for Oil Separation from Lubricating Grease During Storage
  • ASTM D1743 : EN-Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
  • ASTM D1743 REV A : EN-Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
  • ASTM D1744 : EN-STANDARD TEST METHOD FOR WATER IN LIQUID PETROLEUM PRODUCTS BY KARL FISCHER REAGENT (DIN 51777)
  • ASTM D1746 : EN-Standard Test Method for Transparency of Plastic Sheeting
  • ASTM D1747 : EN-Standard Test Method for Refractive Index of Viscous Materials
  • ASTM D1748 : EN-Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet-IP Designation: 366/84; E1-1993
  • ASTM D1749 : EN-Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products (Technical Association of the Pulp and Paper Industry Standard Method T 1200 rp-)
  • ASTM D1750 : EN-STANDARD TABLES FOR POSITIVE DISPLACEMENT METER PROVER TANKS
  • ASTM D1751 : EN-Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)-AASHTO M213
  • ASTM D1752 : EN-Standard Specification for Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction
  • ASTM D1752 REV A : EN-Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
  • ASTM D1754 : EN-STANDARD TEST METHOD FOR EFFECT OF HEAT AND AIR ON ASPHALTIC MATERIALS (THIN-FILM OVEN TEST) (AASHTO T179)
  • ASTM D1754/D1754M : EN-Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
  • ASTM D1755 : EN-Standard Specification for Poly(Vinyl Chloride) Resins
  • ASTM D1756 : EN-Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal
  • ASTM D1757 : EN-Standard Test Method for Sulfate Sulfur in Ash from Coal and Coke
  • ASTM D1758 : EN-STANDARD METHOD OF EVALUATING WOOD PRESERVATIVES BY FIELD TESTS WITH STAKES (R 1980)
  • ASTM D176 : EN-Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
  • ASTM D1760 : EN-Standard Specification for Pressure Treatment of Timber Products
  • ASTM D1760 REV A : EN-STANDARD SPECIFICATION FOR PRESSURE TREATMENT OF TIMBER PRODUCTS
  • ASTM D1760 REV B : EN-STANDARD SPECIFICATION FOR PRESSURE TREATMENT OF TIMBER PRODUCTS
  • ASTM D1761 : EN-Standard Test Methods for Mechanical Fasteners in Wood
  • ASTM D1762 : EN-Standard Method for Chemical Analysis of Wood Charcoal
  • ASTM D1763 : EN-Standard Specification for Epoxy Resins
  • ASTM D1764 : EN-Standard Specification for Rubber Latex Products for Automotive Applications (SAE Standard J 19)
  • ASTM D1765 : EN-Standard Classification System for Carbon Blacks Used in Rubber Products-(Error’s Found On 2004 Revision – 2003 Revision Reactivated)
  • ASTM D1765 REV A : EN-Standard Classification System for Carbon Blacks Used in Rubber Products
  • ASTM D1765 REV B : EN-Standard Classification System for Carbon Blacks Used in Rubber Products
  • ASTM D1765 REV C : EN-STANDARD CLASSIFICATION SYSTEM FOR CARBON BLACKS USED IN RUBBER PRODUCTS
  • ASTM D1766 : EN-Standard Test Method for Rubber Chemicals – Solubility
  • ASTM D1767 : EN-Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents
  • ASTM D1768 : EN-Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
  • ASTM D1769 : EN-STANDARD TEST METHOD FOR LINEAR DENSITY OF COTTON FIBERS (ARRAY SAMPLE)
  • ASTM D1770 : EN-STANDARD TEST METHOD FOR NEPS VEGETABLE MATTER AND COLORED FIBER IN WOOL TOP
  • ASTM D1774 : EN-STANDARD TEST METHODS FOR ELASTIC PROPERTIES OF TEXTILE FIBERS
  • ASTM D1775 : EN-Standard Test Method for Tension and Elongation of Wide Elastic Fabrics (Constant-Rate-of-Load Type Tensile Testing Machine)
  • ASTM D1776 : EN-Standard Practice for Conditioning and Testing Textiles
  • ASTM D1777 : EN-Standard Test Method for Thickness of Textile Materials
  • ASTM D1779 : EN-STANDARD SPECIFICATION FOR ADHESIVE FOR ACOUSTICAL MATERIALS (R 1983) (WITHDRAWN)
  • ASTM D178 : EN-Standard Specification for Rubber Insulating Matting
  • ASTM D1780 : EN-Standard Practice for Conducting Creep Tests of Metal-To-Metal Adhesives
  • ASTM D1781 : EN-STANDARD METHOD FOR CLIMBING DRUM PEEL TEST FOR ADHESIVES (R 1986)
  • ASTM D1782 : EN-Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
  • ASTM D1783 : EN-Standard Test Methods for Phenolic Compounds in Water
  • ASTM D1784 : EN-Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • ASTM D1784 REV A : EN-Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • ASTM D1785 : EN-STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PLASTIC PIPE SCHEDULES 40 80 AND 120
  • ASTM D1785 REV A : EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Schedules 40 80 and 120
  • ASTM D1785 REV B : EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Schedules 40 80 and 120
  • ASTM D1786 : EN-STANDARD SPECIFICATION FOR TOLUENE DIISOCYANATE
  • ASTM D1787 : EN-STANDARD TEST METHOD FOR PENTOSANS IN CELLULOSE
  • ASTM D1788 : EN-STANDARD SPECIFICATION FOR RIGID ACRYLONITRILE- BUTADIENE-STYRENE (ABS) PLASTICS
  • ASTM D1790 : EN-Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
  • ASTM D1791 : EN-STANDARD TEST METHOD FOR ACCELERATED AGING OF LIQUID WATER-EMULSION FLOOR POLISHES
  • ASTM D1792 : EN-Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes1
  • ASTM D1793 : EN-STANDARD TEST METHOD FOR WATER SPOTTING OF EMULSION FLOOR POLISHES
  • ASTM D1794 : EN-STANDARD TEST METHOD FOR ALCOHOL-BENZENE SOLUBLE MATTER IN CELLULOSE (MODIFICATION OF TECHNICAL ASSOCIATION OF PULP AND PAPER INDUSTRY STANDARD METHOD T6M-59)
  • ASTM D1795 : EN-Standard Test Method for Intrinsic Viscosity of Cellulose
  • ASTM D1796 : EN-Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)-IP Designation: 75/82;
  • ASTM D1799 : EN-STANDARD PRACTICE FOR CARBON BLACK – SAMPLING PACKAGED SHIPMENTS
  • ASTM D1799 REV A : EN-Standard Practice for Carbon Black-Sampling Packaged Shipments
  • ASTM D1807 : EN-STANDARD TEST METHODS FOR REFRACTIVE INDEX AND SPECIFIC OPTICAL DISPERSION OF ELECTRICAL INSULATING LIQUIDS (R 1989)
  • ASTM D1810 : EN-STANDARD TEST METHOD FOR SPECIFIC GRAVITY OF ASKARELS (R 1983) (E1-1983)
  • ASTM D1813 : EN-Standard Test Method for Measuring Thickness of Leather Test Specimens
  • ASTM D1814 : EN-Standard Test Method for Measuring Thickness of Leather Units
  • ASTM D1815 : EN-Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather
  • ASTM D1816 : EN-Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
  • ASTM D1816 REV A : EN-Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
  • ASTM D1817 : EN-STANDARD TEST METHOD FOR RUBBER CHEMICALS – DENSITY (R 1995) (E1-1995)
  • ASTM D1818 : EN-STANDARD SPECIFICATION FOR CONTINUITY OF QUALITY OF ELECTRICAL INSULATING OIL FOR LOW-PRESSURE CABLE SYSTEMS
  • ASTM D1819 : EN-STANDARD SPECIFICATION FOR CONTINUITY OF QUALITY OF ELECTRICAL INSULATING OIL FOR HIGH- PRESSURE CABLE SYSTEMS
  • ASTM D1820 : EN-STANDARD TEST METHOD FOR HYDROLYZABLE CHLORINE COMPOUNDS IN CHLORINATED AROMATIC HYDROCARBONS (ASKARELS)
  • ASTM D1820 REV A : EN-STANDARD TEST METHOD FOR HYDROLYZABLE CHLORINE COMPOUNDS IN CHLORINATED AROMATIC HYDROCARBONS (ASKARELS)
  • ASTM D1821 : EN-STANDARD TEST METHOD FOR INORGANIC CHLORIDES IN ASKARELS (R 1989)
  • ASTM D1822 : EN-Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
  • ASTM D1822M : EN-STANDARD TEST METHOD FOR TENSILE-IMPACT ENERGY TO BREAK PLASTICS AND ELECTRICAL MATERIALS (METRIC)
  • ASTM D1822M REV A : EN-STANDARD TEST METHOD FOR TENSILE-IMPACT ENERGY TO BREAK PLASTICS AND ELECTRICAL INSULATING MATERIALS (METRIC)
  • ASTM D1823 : EN-STANDARD TEST METHOD FOR APPARENT VISCOSITY OF PLASTISOLS AND ORGANOSOLS AT HIGH SHEAR RATES BY EXTRUSION VISCOMETER
  • ASTM D1824 : EN-STANDARD TEST METHOD FOR APPARENT VISCOSITY OF PLASTISOLS AND ORGANOSOLS AT LOW SHEAR RATES
  • ASTM D1825 : EN-Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
  • ASTM D1826 : EN-STANDARD TEST METHOD FOR CALORIFIC VALUE OF GASES IN NATURAL GAS RANGE BY CONTINUOUS RECORDING CALORIMETER
  • ASTM D1827 : EN-Standard Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon Dioxide
  • ASTM D1828 : EN-STANDARD PRACTICE FOR ATMOSPHERIC EXPOSURE OF ADHESIVE-BONDED JOINTS AND STRUCTURES (R 1987)
  • ASTM D1829 : EN-STANDARD TEST METHOD FOR ELECTRICAL RESISTANCE OF CERAMIC MATERIALS AT ELEVATED TEMPERATURES
  • ASTM D1830 : EN-Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
  • ASTM D1831 : EN-STANDARD TEST METHOD FOR ROLL STABILITY OF LUBRICATING GREASE
  • ASTM D1832 : EN-Standard Test Method for Peroxide Number of Petroleum Wax-TAPPI T 659 su-67
  • ASTM D1833 : EN-Standard Test Method for Odor of Petroleum Wax-TAPPI T 654 ts-64; IP Designation: 185/69 (85)
  • ASTM D1834 : EN-Standard Test Method for 20 Degree Specular Gloss of Waxed Paper
  • ASTM D1835 : EN-STANDARD SPECIFICATION FOR LIQUEFIED PETROLEUM (LP) GASES
  • ASTM D1835 REV A : EN-Standard Specification for Liquefied Petroleum (LP) Gases
  • ASTM D1836 : EN-Standard Specification for Commercial Hexanes
  • ASTM D1837 : EN-STANDARD TEST METHOD FOR VOLATILITY OF LIQUEFIED PETROLEUM (LP) GASES
  • ASTM D1837 REV A : EN-Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
  • ASTM D1838 : EN-Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
  • ASTM D1839 : EN-STANDARD TEST METHOD FOR AMYL NITRATE IN DIESEL FUELS
  • ASTM D1840 : EN-STANDARD TEST METHOD FOR NAPHTHALENE HYDROCARBONS IN AVIATION TURBINE FUELS BY ULTRAVIOLET SPECTROPHOTOMETRY
  • ASTM D1841 : EN-Standard Specification for Distilled Coconut Fatty Acids
  • ASTM D1842 : EN-Standard Specification for Distilled Corn Fatty Acids
  • ASTM D1843 : EN-Standard Specification for Fractionated and Distilled Cottonseed Fatty Acids
  • ASTM D1844 : EN-Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate
  • ASTM D1845 : EN-STANDARD METHODS FOR CHEMICAL ANALYSIS OF STRONTIUM CHROMATE PIGMENT (R 1979) (E1-1979) (E2-1983)
  • ASTM D1847 : EN-STANDARD TEST METHODS FOR TOTAL CHLORINE CONTENT OF EPOXY RESINS (R 1980) (E1-1980)
  • ASTM D1848 : EN-STANDARD CLASSIFICATION FOR REPORTING PAINT FILM FAILURES CHARACTERISTIC OF EXTERIOR LATEX PAINTS (R 1984) (E1-1984)
  • ASTM D1849 : EN-STANDARD TEST METHOD FOR PACKAGE STABILITY OF PAINT (R 1987) (E1-1987)
  • ASTM D185 : EN-Standard Test Methods for Coarse Particles in Pigments Pastes and Paints
  • ASTM D1850 : EN-STANDARD SPECIFICATION FOR CONCRETE JOINT SEALER COLD-APPLICATION TYPE
  • ASTM D1851 : EN-STANDARD METHODS OF TESTING CONCRETE JOINT SEALERS COLD-APPLICATION TYPE
  • ASTM D1854 : EN-Standard Specification for Jet-Fuel-Resistant Concrete Joint Sealer Hot-Applied Elastic Type
  • ASTM D1855 : EN-Standard Test Methods for Jet-Fuel-Resistant Concrete Joint Sealer Hot-Poured Elastic Type
  • ASTM D1856 : EN-Standard Test Method for Recovery of Asphalt From Solution by Abson Method
  • ASTM D1856 REV A : EN-Standard Test Method for Recovery of Asphalt from Solution by Abson Method
  • ASTM D1857 : EN-Standard Test Method for Fusibility of Coal and Coke Ash
  • ASTM D1858 : EN-Standard Specification for Creosote-Petroleum Solution
  • ASTM D1859 : EN-Standard Specification for Petroleum Used for Blending with Creosote
  • ASTM D1860 : EN-Standard Test Method for Moisture and Creosote-Type Preservative in Wood
  • ASTM D1861 : EN-STANDARD SPECIFICATION FOR HOMOGENEOUS BITUMINIZED FIBER DRAIN AND SEWER PIPE (WITHDRAWN – 1992)
  • ASTM D1862 : EN-STANDARD SPECIFICATION FOR LAMINATED-WALL BITUMINIZED FIBER DRAIN AND SEWER PIPE (R 1981)
  • ASTM D1863 : EN-Standard Specification for Mineral Aggregate Used on Built-Up Roofs
  • ASTM D1864 : EN-Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs-E1
  • ASTM D1864/D1864M : EN-Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs
  • ASTM D1865 : EN-STANDARD TEST METHOD FOR HARDNESS OF MINERAL AGGREGATE USED ON BUILT- UP ROOFS (R 1988) (E1-1988)
  • ASTM D1865/D1865M : EN-Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
  • ASTM D1866 : EN-STANDARD TEST METHOD FOR TRANSLUCENCY OF MINERAL AGGREGATE USED ON BUILT-UP ROOFS
  • ASTM D1867 : EN-STANDARD SPECIFICATION FOR COPPER-CLAD THERMOSETTING LAMINATES FOR PRINTED WIRING
  • ASTM D1868 : EN-Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
  • ASTM D1869 : EN-Standard Specification for Rubber Rings for Asbestos-Cement Pipe
  • ASTM D187 : EN-Standard Test Method for Burning Quality of Kerosine
  • ASTM D1870 : EN-STANDARD PRACTICE FOR ELEVATED TEMPERATURE AGING USING A TUBULAR OVEN (R 1983) (E1 1983)
  • ASTM D1871 : EN-Standard Test Method for Adhesion Between Tire Bead Wire and Rubber
  • ASTM D1871 REV A : EN-STANDARD TEST METHODS FOR RUBBER PROPERTY – ADHESION TO SINGLE-STRAND WIRE (E1-1987)
  • ASTM D1872 : EN-STANDARD METHOD OF TESTING RUBBER CHEMICAL – FREE 2-MERCAPTOBENZOTHIAZOLE IN BENZOTHIAZYL DISULFIDE
  • ASTM D1873 : EN-STANDARD METHOD OF TESTING RUBBER CHEMICAL – TOTAL 2-MERCAPTOBENZOTHIAZOLE IN BENZOTHIAZYL DISULFIDE
  • ASTM D1874 : EN-Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases
  • ASTM D1875 : EN-STANDARD TEST METHOD FOR DENSITY OF ADHESIVES IN FLUID FORM
  • ASTM D1876 : EN-Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
  • ASTM D1879 : EN-Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
  • ASTM D1881 : EN-Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
  • ASTM D1882 : EN-STANDARD TEST METHOD FOR COOLING SYSTEM CHEMICAL SOLUTIONS ON ORGANIC FINISHES FOR AUTOMOTIVE VEHICLES
  • ASTM D1883 : EN-Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
  • ASTM D1886 : EN-Standard Test Methods for Nickel in Water
  • ASTM D1888 : EN-STANDARD TEST METHODS FOR PARTICULATE AND DISSOLVED MATTER SOLIDS OR RESIDUE IN WATER
  • ASTM D1889 : EN-STANDARD TEST METHODS FOR TURBIDITY OF WATER
  • ASTM D1889 REV A : EN-STANDARD TEST METHOD FOR TURBIDITY OF WATER
  • ASTM D189 : EN-Standard Test Method for Conradson Carbon Residue of Petroleum Products
  • ASTM D1890 : EN-Standard Test Method for Beta Particle Radioactivity of Water
  • ASTM D1892 : EN-STANDARD SPECIFICATION FOR STYRENE – BUTADIENE MOLDING AND EXTRUSION MATERIALS
  • ASTM D1893 : EN-STANDARD TEST METHOD FOR BLOCKING OF PLASTIC FILM
  • ASTM D1894 : EN-Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
  • ASTM D1895 : EN-Standard Test Methods for Apparent Density Bulk Factor and Pourability of Plastic Materials
  • ASTM D1896 : EN-Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
  • ASTM D1896 REV A : EN-STANDARD PRACTICE FOR TRANSFER MOLDING TEST SPECIMENS OF THERMOSETTING COMPOUNDS
  • ASTM D1897 : EN-STANDARD PRACTICE FOR INJECTION MOLDING TEST SPECIMENS OF THERMOPLASTIC MOLDING AND EXTRUSION MATERIALS
  • ASTM D1898 : EN-Standard Practice for Sampling of Plastics
  • ASTM D1899 : EN-Standard Test Method for Mass Concentration of Particulate Matter in the Atmosphere (Continuous-Measurement Light-Scattering Method)
  • ASTM D1900 : EN-STANDARD PRACTICE FOR CARBON BLACK – SAMPLING BULK SHIPMENTS
  • ASTM D1901 : EN-Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
  • ASTM D1902 : EN-STANDARD TEST METHOD FOR APPROXIMATE ACIDITY AND POLAR CONTAMINATION IN USED MINERAL TRANSFORMER OIL BY SPOT TESTS
  • ASTM D1903 : EN-Standard Test Method for Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin and Askarels
  • ASTM D1907 : EN-Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
  • ASTM D1908 : EN-Standard Test Method for Needle-Related Damage Due to Sewing in Woven Fabric
  • ASTM D1909 : EN-Standard Table of Commercial Moisture Regains for Textile Fibers
  • ASTM D1912 : EN-Standard Test Method for Cold-Crack Resistance of Upholstery Leather
  • ASTM D1913 : EN-Standard Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test)
  • ASTM D1914 : EN-STANDARD PRACTICE FOR CONVERSION UNITS AND FACTORS RELATING TO ATMOSPHERIC ANALYSIS
  • ASTM D1915 : EN-Standard Test Method for Chromatographic Analysis of Chemically Refined Cellulose
  • ASTM D1916 : EN-STANDARD TEST METHOD FOR PENETRATION OF ADHESIVES
  • ASTM D1917 : EN-STANDARD TEST METHODS FOR RUBBER PROPERTY – SHRINKAGE OF RAW AND COMPOUNDED STYRENE- BUTADIENE RUBBER (SBR)
  • ASTM D1918 : EN-Standard Test Method for Asbestos Content of Asbestos Textiles
  • ASTM D1918/D1918M : EN-Standard Test Method for Asbestos Content of Asbestos Textiles
  • ASTM D1921 : EN-Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
  • ASTM D1922 : EN-Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
  • ASTM D1922 REV A : EN-Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
  • ASTM D1925 : EN-Standard Test Method for Yellowness Index of Plastics
  • ASTM D1926 : EN-STANDARD TEST METHODS FOR CARBOXYL CONTENT OF CELLULOSE
  • ASTM D1927 : EN-Standard Specification for Rigid Poly(Vinyl Chloride) Plastic Sheet
  • ASTM D1928 : EN-Standard Practice for Preparation of Compression-Molded Polyethylene Test Sheets and Test Specimens
  • ASTM D1929 : EN-STANDARD TEST METHOD FOR IGNITION PROPERTIES OF PLASTICS
  • ASTM D1864 : EN-Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs-E1
  • ASTM D1864/D1864M : EN-Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs
  • ASTM D1865 : EN-STANDARD TEST METHOD FOR HARDNESS OF MINERAL AGGREGATE USED ON BUILT- UP ROOFS (R 1988) (E1-1988)
  • ASTM D1865/D1865M : EN-Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
  • ASTM D1866 : EN-STANDARD TEST METHOD FOR TRANSLUCENCY OF MINERAL AGGREGATE USED ON BUILT-UP ROOFS
  • ASTM D1867 : EN-STANDARD SPECIFICATION FOR COPPER-CLAD THERMOSETTING LAMINATES FOR PRINTED WIRING
  • ASTM D1868 : EN-Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
  • ASTM D1869 : EN-Standard Specification for Rubber Rings for Asbestos-Cement Pipe
  • ASTM D187 : EN-Standard Test Method for Burning Quality of Kerosine
  • ASTM D1870 : EN-STANDARD PRACTICE FOR ELEVATED TEMPERATURE AGING USING A TUBULAR OVEN (R 1983) (E1 1983)
  • ASTM D1871 : EN-Standard Test Method for Adhesion Between Tire Bead Wire and Rubber
  • ASTM D1871 REV A : EN-STANDARD TEST METHODS FOR RUBBER PROPERTY – ADHESION TO SINGLE-STRAND WIRE (E1-1987)
  • ASTM D1872 : EN-STANDARD METHOD OF TESTING RUBBER CHEMICAL – FREE 2-MERCAPTOBENZOTHIAZOLE IN BENZOTHIAZYL DISULFIDE
  • ASTM D1873 : EN-STANDARD METHOD OF TESTING RUBBER CHEMICAL – TOTAL 2-MERCAPTOBENZOTHIAZOLE IN BENZOTHIAZYL DISULFIDE
  • ASTM D1874 : EN-Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases
  • ASTM D1875 : EN-STANDARD TEST METHOD FOR DENSITY OF ADHESIVES IN FLUID FORM
  • ASTM D1876 : EN-Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
  • ASTM D1879 : EN-Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
  • ASTM D1881 : EN-Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
  • ASTM D1882 : EN-STANDARD TEST METHOD FOR COOLING SYSTEM CHEMICAL SOLUTIONS ON ORGANIC FINISHES FOR AUTOMOTIVE VEHICLES
  • ASTM D1883 : EN-Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
  • ASTM D1886 : EN-Standard Test Methods for Nickel in Water
  • ASTM D1888 : EN-STANDARD TEST METHODS FOR PARTICULATE AND DISSOLVED MATTER SOLIDS OR RESIDUE IN WATER
  • ASTM D1889 : EN-STANDARD TEST METHODS FOR TURBIDITY OF WATER
  • ASTM D1889 REV A : EN-STANDARD TEST METHOD FOR TURBIDITY OF WATER
  • ASTM D189 : EN-Standard Test Method for Conradson Carbon Residue of Petroleum Products
  • ASTM D1890 : EN-Standard Test Method for Beta Particle Radioactivity of Water
  • ASTM D1892 : EN-STANDARD SPECIFICATION FOR STYRENE – BUTADIENE MOLDING AND EXTRUSION MATERIALS
  • ASTM D1893 : EN-STANDARD TEST METHOD FOR BLOCKING OF PLASTIC FILM
  • ASTM D1894 : EN-Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
  • ASTM D1895 : EN-Standard Test Methods for Apparent Density Bulk Factor and Pourability of Plastic Materials
  • ASTM D1896 : EN-Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
  • ASTM D1896 REV A : EN-STANDARD PRACTICE FOR TRANSFER MOLDING TEST SPECIMENS OF THERMOSETTING COMPOUNDS
  • ASTM D1897 : EN-STANDARD PRACTICE FOR INJECTION MOLDING TEST SPECIMENS OF THERMOPLASTIC MOLDING AND EXTRUSION MATERIALS
  • ASTM D1898 : EN-Standard Practice for Sampling of Plastics
  • ASTM D1899 : EN-Standard Test Method for Mass Concentration of Particulate Matter in the Atmosphere (Continuous-Measurement Light-Scattering Method)
  • ASTM D1900 : EN-STANDARD PRACTICE FOR CARBON BLACK – SAMPLING BULK SHIPMENTS
  • ASTM D1901 : EN-Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
  • ASTM D1902 : EN-STANDARD TEST METHOD FOR APPROXIMATE ACIDITY AND POLAR CONTAMINATION IN USED MINERAL TRANSFORMER OIL BY SPOT TESTS
  • ASTM D1903 : EN-Standard Test Method for Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin and Askarels
  • ASTM D1907 : EN-Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
  • ASTM D1908 : EN-Standard Test Method for Needle-Related Damage Due to Sewing in Woven Fabric
  • ASTM D1909 : EN-Standard Table of Commercial Moisture Regains for Textile Fibers
  • ASTM D1912 : EN-Standard Test Method for Cold-Crack Resistance of Upholstery Leather
  • ASTM D1913 : EN-Standard Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test)
  • ASTM D1914 : EN-STANDARD PRACTICE FOR CONVERSION UNITS AND FACTORS RELATING TO ATMOSPHERIC ANALYSIS
  • ASTM D1915 : EN-Standard Test Method for Chromatographic Analysis of Chemically Refined Cellulose
  • ASTM D1916 : EN-STANDARD TEST METHOD FOR PENETRATION OF ADHESIVES
  • ASTM D1917 : EN-STANDARD TEST METHODS FOR RUBBER PROPERTY – SHRINKAGE OF RAW AND COMPOUNDED STYRENE- BUTADIENE RUBBER (SBR)
  • ASTM D1918 : EN-Standard Test Method for Asbestos Content of Asbestos Textiles
  • ASTM D1918/D1918M : EN-Standard Test Method for Asbestos Content of Asbestos Textiles
  • ASTM D1921 : EN-Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
  • ASTM D1922 : EN-Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
  • ASTM D1922 REV A : EN-Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
  • ASTM D1925 : EN-Standard Test Method for Yellowness Index of Plastics
  • ASTM D1926 : EN-STANDARD TEST METHODS FOR CARBOXYL CONTENT OF CELLULOSE
  • ASTM D1927 : EN-Standard Specification for Rigid Poly(Vinyl Chloride) Plastic Sheet
  • ASTM D1928 : EN-Standard Practice for Preparation of Compression-Molded Polyethylene Test Sheets and Test Specimens
  • ASTM D1929 : EN-Standard Test Method for Determining Ignition Temperature of Plastics
  • ASTM D1929 REV A : EN-Standard Test Method for Ignition Properties of Plastics
  • ASTM D1930 : EN-STANDARD SPECIFICATION FOR KRAFT DIELECTRIC TISSUE CAPACITOR GRADE
  • ASTM D1931 : EN-Standard Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
  • ASTM D1932 : EN-Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
  • ASTM D1933 : EN-Standard Specification for Nitrogen Gas as an Electrical Insulating Material
  • ASTM D1934 : EN-Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
  • ASTM D1934 REV A : EN-STANDARD TEST METHOD FOR OXIDATIVE AGING OF ELECTRICAL INSULATING PETROLEUM OILS BY OPEN-BEAKER METHOD
  • ASTM D1936 : EN-STANDARD TEST METHOD FOR THERMAL STABILITY OF CHLORINATED AROMATIC HYDROCARBONS (ASKARELS)
  • ASTM D1937 : EN-STANDARD TEST METHOD FOR CARBON BLACK PELLETED – MASS STRENGTH
  • ASTM D1938 : EN-Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
  • ASTM D1939 : EN-STANDARD PRACTICE FOR DETERMINING RESIDUAL STRESSES IN EXTRUDED OR MOLDED ACRYLONITRILE- BUTADIENE-STYRENE (ABS) PARTS BY IMMERSION IN GLACIAL ACETIC ACID (R 1989)
  • ASTM D1940 : EN-Tentative Method of Test for POROSITY OF RIGID CELLULAR PLASTICS
  • ASTM D1941 : EN-Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
  • ASTM D1942 : EN-STANDARD TEST METHOD FOR MORPHOLINE IN WATER
  • ASTM D1943 : EN-STANDARD TEST METHOD FOR ALPHA PARTICLE RADIOACTIVITY OF WATER
  • ASTM D1945 : EN-Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1946 : EN-STANDARD METHOD FOR ANALYSIS OF REFORMED GAS BY GAS CHROMATOGRAPHY
  • ASTM D1947 : EN-Standard Test Method for Load-Carrying Capacity of Petroleum Oil and Synthetic Fluid Gear Lubricants
  • ASTM D1949 : EN-STANDARD TEST METHOD FOR SEPARATION OF TETRAETHYLLEAD AND TETRAMETHYLLEAD IN GASOLINE
  • ASTM D1950 : EN-STANDARD TEST METHOD FOR ACETONE TOLERANCE OF HEAT-BODIED DRYING OILS (R 1984)
  • ASTM D1951 : EN-STANDARD TEST METHOD FOR ASH IN DRYING OILS AND FATTY ACIDS (R 1984)
  • ASTM D1952 : EN-STANDARD TEST METHOD FOR QUANTITATIVE DETERMINATION OF BREAK IN DRYING OILS (R 1984)
  • ASTM D1954 : EN-Standard Test Method for Foots in Raw Linseed Oil (Volumetric Method)
  • ASTM D1955 : EN-Standard Test Method for Gel Time of Drying Oils
  • ASTM D1957 : EN-Standard Test Method for Hydroxyl Value of Fatty Oils and Acids
  • ASTM D1958 : EN-STANDARD TEST METHOD FOR CHLOROFORM INSOLUBLE MATTER IN OITICICA OIL
  • ASTM D1959 : EN-Standard Test Method for Iodine Value of Drying Oils and Fatty Acids
  • ASTM D1960 : EN-Standard Test Method for Loss on Heating of Drying Oils
  • ASTM D1962 : EN-Standard Test Method for Saponification Value of Drying Oils Fatty Acids and Polymerized Fatty Acids
  • ASTM D1963 : EN-Standard Test Method for Specific Gravity of Drying Oils Varnishes Resins and Related Materials at 25/25 Degrees C
  • ASTM D1964 : EN-Standard Test Method for Tung Oil Quality
  • ASTM D1965 : EN-STANDARD TEST METHOD FOR UNSAPONIFIABLE MATTER IN DRYING OILS FATTY ACIDS AND POLYMERIZED FATTY ACIDS
  • ASTM D1966 : EN-Standard Test Method for Foots in Raw Linseed Oil (Gravimetric Method)
  • ASTM D1967 : EN-Standard Test Method for Measuring Color After Heating of Drying Oils
  • ASTM D1968 : EN-Standard Terminology Relating to Paper and Paper Products
  • ASTM D1968 REV A : EN-STANDARD TERMINOLOGY RELATING TO PAPER AND PAPER PRODUCTS
  • ASTM D1968 REV B : EN-STANDARD TERMINOLOGY RELATING TO PAPER AND PAPER PRODUCTS
  • ASTM D1968 REV C : EN-Standard Terminology Relating to Paper and Paper Products
  • ASTM D1968 REV E : EN-STANDARD TERMINOLOGY RELATING TO PAPER AND PAPER PRODUCTS
  • ASTM D1969 : EN-Standard Specification for 2-Ethylhexanol (Synthetic)
  • ASTM D197 : EN-Standard Test Method for Sampling and Fineness Test of Pulverized Coal
  • ASTM D1970 : EN-Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
  • ASTM D1971 : EN-Standard Practices for Digestion of Samples for Determination of Metals by Flame Atomic Absorption or Plasma Emission Spectroscopy
  • ASTM D1972 : EN-Standard Practice for Generic Marking of Plastic Products
  • ASTM D1973 : EN-Standard Guide for Design of a Liner System for Containment of Wastes
  • ASTM D1974 : EN-STANDARD PRACTICE FOR METHODS OF CLOSING SEALING AND REINFORCING FIBERBOARD SHIPPING CONTAINERS
  • ASTM D1974 REV A : EN-Standard Practice for Methods of Closing Sealing and Reinforcing Fiberboard Boxes
  • ASTM D1975 : EN-Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
  • ASTM D1976 : EN-STANDARD TEST METHOD FOR ELEMENTS IN WATER BY INDUCTIVELY-COUPLED ARGON PLASMA ATOMIC EMISSION SPECTROSCOPY

 

ASTM A , ASTM B ,  ASTM C ,  ASTM D 1 || 2 || 3 || 4 |5 |6 || 7 |8 | , ASTM E ASTM F , ASTM G