EN 1865 :Specifications for stretchers and other patient handling equipment used in road ambulances.

04 Mar 2015 Comments
Off

EN 1865 :Specifications for stretchers and other patient handling equipment used in road ambulances.

Normative references

EN 1021-1 Funiture-Assessment of ignitablity of upholstered funiture- Part1 : Ignition source : smouldering cigarette(ISO 8191-1)
EN 282-2 Safety of machinery – Basic concepts, general principles for desgin – Part 2 : technical principles and specifications.
EN 597-1 Funiture- Assessment of ignitablity of upholstered funiture- Part1 : Ignition source : smouldering cigarette.
EN 980 Graphical sysbols for use in the labeling of medical devices.
EN 1041 Information supplied by the manufacturer with medical devices.
EN 1789 Medical vehicles and their equipment – Road ambulances.

NFPA 규격 목록

28 Feb 2015 Comments
Off

NFPA ( National Fire Protection Association) 규격목록입니다.

각 규격별 내용은 NFPA 공식 사이트(http://www.nfpa.org/)를 참조하시기 바랍니다.  각 규격에는 해당되는 경우,  규격항목, 시험 및 절차 등이 상세히 기술되어 있습니다.

  • NFPA 1Fire Code
  • NFPA 2Hydrogen Technologies Code
  • NFPA 3Recommended Practice for Commissioning of Fire Protection and Life Safety Systems
  • NFPA 4Standard for Integrated Fire Protection and Life Safety System Testing
  • NFPA 10Standard for Portable Fire Extinguishers
  • NFPA 11Standard for Low-, Medium-, and High-Expansion Foam
  • NFPA 11AStandard for Medium- and High-Expansion Foam Systems
  • NFPA 11CStandard for Mobile Foam Apparatus
  • NFPA 12Standard on Carbon Dioxide Extinguishing Systems
  • NFPA 12AStandard on Halon 1301 Fire Extinguishing Systems
  • NFPA 13Standard for the Installation of Sprinkler Systems
  • NFPA 13DStandard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes
  • NFPA 13ERecommended Practice for Fire Department Operations in Properties Protected by Sprinkler and Standpipe Systems
  • NFPA 13RStandard for the Installation of Sprinkler Systems in Low-Rise Residential Occupancies
  • NFPA 14Standard for the Installation of Standpipe and Hose Systems
  • NFPA 15Standard for Water Spray Fixed Systems for Fire Protection
  • NFPA 16Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems
  • NFPA 17Standard for Dry Chemical Extinguishing Systems
  • NFPA 17AStandard for Wet Chemical Extinguishing Systems
  • NFPA 18Standard on Wetting Agents
  • NFPA 18AStandard on Water Additives for Fire Control and Vapor Mitigation
  • NFPA 20Standard for the Installation of Stationary Pumps for Fire Protection
  • NFPA 22Standard for Water Tanks for Private Fire Protection
  • NFPA 24Standard for the Installation of Private Fire Service Mains and Their Appurtenances
  • NFPA 25Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems
  • NFPA 30Flammable and Combustible Liquids Code
  • NFPA 30ACode for Motor Fuel Dispensing Facilities and Repair Garages
  • NFPA 30BCode for the Manufacture and Storage of Aerosol Products
  • NFPA 31Standard for the Installation of Oil-Burning Equipment
  • NFPA 32Standard for Drycleaning Plants
  • NFPA 33Standard for Spray Application Using Flammable or Combustible Materials
  • NFPA 34Standard for Dipping, Coating, and Printing Processes Using Flammable or Combustible Liquids
  • NFPA 35Standard for the Manufacture of Organic Coatings
  • NFPA 36Standard for Solvent Extraction Plants
  • NFPA 37Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines
  • NFPA 40Standard for the Storage and Handling of Cellulose Nitrate Film
  • NFPA 42Code for the Storage of Pyroxylin Plastic
  • NFPA 45Standard on Fire Protection for Laboratories Using Chemicals
  • NFPA 46Recommended Safe Practice for Storage of Forest Products
  • NFPA 50Standard for Bulk Oxygen Systems at Consumer Sites
  • NFPA 50AStandard for Gaseous Hydrogen Systems at Consumer Sites
  • NFPA 50BStandard for Liquefied Hydrogen Systems at Consumer Sites
  • NFPA 51Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes
  • NFPA 51AStandard for Acetylene Cylinder Charging Plants
  • NFPA 51BStandard for Fire Prevention During Welding, Cutting, and Other Hot Work
  • NFPA 52Vehicular Gaseous Fuel Systems Code
  • NFPA 53Recommended Practice on Materials, Equipment, and Systems Used in Oxygen-Enriched Atmospheres
  • NFPA 54National Fuel Gas Code
  • NFPA 55Compressed Gases and Cryogenic Fluids Code
  • NFPA 56Standard for Fire and Explosion Prevention During Cleaning and Purging of Flammable Gas Piping Systems
  • NFPA 57Liquefied Natural Gas (LNG) Vehicular Fuel Systems Code
  • NFPA 58Liquefied Petroleum Gas Code
  • NFPA 59Utility LP-Gas Plant Code
  • NFPA 59AStandard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG)
  • NFPA 61Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities
  • NFPA 67Guide on Explosion Protection for Gaseous Mixtures in Pipe Systems
  • NFPA 68Standard on Explosion Protection by Deflagration Venting
  • NFPA 69Standard on Explosion Prevention Systems
  • NFPA 70National Electrical Code
  • NFPA 70ANational Electrical Code Requirements for One- and Two-Family Dwellings
  • NFPA 70BRecommended Practice for Electrical Equipment Maintenance
  • NFPA 70EStandard for Electrical Safety in the Workplace
  • NFPA 72National Fire Alarm and Signaling Code
  • NFPA 73Standard for Electrical Inspections for Existing Dwellings
  • NFPA 75Standard for the Fire Protection of Information Technology Equipment
  • NFPA 76Standard for the Fire Protection of Telecommunications Facilities
  • NFPA 77Recommended Practice on Static Electricity
  • NFPA 79Electrical Standard for Industrial Machinery
  • NFPA 80Standard for Fire Doors and Other Opening Protectives
  • NFPA 80ARecommended Practice for Protection of Buildings from Exterior Fire Exposures
  • NFPA 82Standard on Incinerators and Waste and Linen Handling Systems and Equipment
  • NFPA 85Boiler and Combustion Systems Hazards Code
  • NFPA 86Standard for Ovens and Furnaces
  • NFPA 86CStandard for Industrial Furnaces Using a Special Processing Atmosphere
  • NFPA 86DStandard for Industrial Furnaces Using Vacuum as an Atmosphere
  • NFPA 87Recommended Practice for Fluid Heaters
  • NFPA 88AStandard for Parking Structures
  • NFPA 88BStandard for Repair Garages
  • NFPA 90AStandard for the Installation of Air-Conditioning and Ventilating Systems
  • NFPA 90BStandard for the Installation of Warm Air Heating and Air-Conditioning Systems
  • NFPA 91Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Particulate Solids
  • NFPA 92Standard for Smoke Control Systems
  • NFPA 92AStandard for Smoke-Control Systems Utilizing Barriers and Pressure Differences
  • NFPA 92BStandard for Smoke Management Systems in Malls, Atria, and Large Spaces
  • NFPA 96Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations
  • NFPA 97Standard Glossary of Terms Relating to Chimneys, Vents, and Heat-Producing Appliances
  • NFPA 99Health Care Facilities Code
  • NFPA 99BStandard for Hypobaric Facilities
  • NFPA 101Life Safety Code
  • NFPA 101AGuide on Alternative Approaches to Life Safety
  • NFPA 101BCode for Means of Egress for Buildings and Structures
  • NFPA 102Standard for Grandstands, Folding and Telescopic Seating, Tents, and Membrane Structures
  • NFPA 105Standard for the Installation of Smoke Door Assemblies and Other Opening Protectives
  • NFPA 110Standard for Emergency and Standby Power Systems
  • NFPA 111Standard on Stored Electrical Energy Emergency and Standby Power Systems
  • NFPA 115Standard for Laser Fire Protection
  • NFPA 120Standard for Fire Prevention and Control in Coal Mines
  • NFPA 121Standard on Fire Protection for Self-Propelled and Mobile Surface Mining Equipment
  • NFPA 122Standard for Fire Prevention and Control in Metal/Nonmetal Mining and Metal Mineral Processing Facilities
  • NFPA 123Standard for Fire Prevention and Control in Underground Bituminous Coal Mines
  • NFPA 130Standard for Fixed Guideway Transit and Passenger Rail Systems
  • NFPA 140Standard on Motion Picture and Television Production Studio Soundstages, Approved Production Facilities, and Production Locations
  • NFPA 150Standard on Fire and Life Safety in Animal Housing Facilities
  • NFPA 160Standard for the Use of Flame Effects Before an Audience
  • NFPA 170Standard for Fire Safety and Emergency Symbols
  • NFPA 203Guide on Roof Coverings and Roof Deck Constructions
  • NFPA 204Standard for Smoke and Heat Venting
  • NFPA 211Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances
  • NFPA 214Standard on Water-Cooling Towers
  • NFPA 220Standard on Types of Building Construction
  • NFPA 221Standard for High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls
  • NFPA 225Model Manufactured Home Installation Standard
  • NFPA 230Standard for the Fire Protection of Storage
  • NFPA 231Standard for General Storage
  • NFPA 231CStandard for Rack Storage of Materials
  • NFPA 231DStandard for Storage of Rubber Tires
  • NFPA 231ERecommended Practice for the Storage of Baled Cotton
  • NFPA 231FStandard for the Storage of Roll Paper
  • NFPA 232Standard for the Protection of Records
  • NFPA 232AGuide for Fire Protection for Archives and Records Centers
  • NFPA 241Standard for Safeguarding Construction, Alteration, and Demolition Operations
  • NFPA 251Standard Methods of Tests of Fire Resistance of Building Construction and Materials
  • NFPA 252Standard Methods of Fire Tests of Door Assemblies
  • NFPA 253Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source
  • NFPA 255Standard Method of Test of Surface Burning Characteristics of Building Materials
  • NFPA 256Standard Methods of Fire Tests of Roof Coverings
  • NFPA 257Standard on Fire Test for Window and Glass Block Assemblies
  • NFPA 258Recommended Practice for Determining Smoke Generation of Solid Materials
  • NFPA 259Standard Test Method for Potential Heat of Building Materials
  • NFPA 260Standard Methods of Tests and Classification System for Cigarette Ignition Resistance of Components of Upholstered Furniture
  • NFPA 261Standard Method of Test for Determining Resistance of Mock-Up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes
  • NFPA 262Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces
  • NFPA 265Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls
  • NFPA 266Standard Method of Test for Fire Characteristics of Upholstered Furniture Exposed to Flaming Ignition Source
  • NFPA 267Standard Method of Test for Fire Characteristics of Mattresses and Bedding Assemblies Exposed to Flaming Ignition Source
  • NFPA 268Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source
  • NFPA 269Standard Test Method for Developing Toxic Potency Data for Use in Fire Hazard Modeling
  • NFPA 270Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber
  • NFPA 271Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
  • NFPA 272Standard Method of Test for Heat and Visible Smoke Release Rates for Upholstered Furniture Components or Composites and Mattresses Using an Oxygen Consumption Calorimeter
  • NFPA 274Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation
  • NFPA 275Standard Method of Fire Tests for the Evaluation of Thermal Barriers
  • NFPA 276Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Deck Roofing Components
  • NFPA 277Standard Methods of Tests for Evaluating Fire and Ignition Resistance of Upholstered Furniture Using a Flaming Ignition Source
  • NFPA 285Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components
  • NFPA 286Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
  • NFPA 287Standard Test Methods for Measurement of Flammability of Materials in Cleanrooms Using a Fire Propagation Apparatus (FPA)
  • NFPA 288Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance-Rated Assemblies
  • NFPA 289Standard Method of Fire Test for Individual Fuel Packages
  • NFPA 290Standard for Fire Testing of Passive Protection Materials for Use on LP-Gas Containers
  • NFPA 291Recommended Practice for Fire Flow Testing and Marking of Hydrants
  • NFPA 295Standard for Wildfire Control
  • NFPA 297Guide on Principles and Practices for Communications Systems
  • NFPA 298Standard on Foam Chemicals for Wildland Fire Control
  • NFPA 299Standard for Protection of Life and Property from Wildfire
  • NFPA 301Code for Safety to Life from Fire on Merchant Vessels
  • NFPA 302Fire Protection Standard for Pleasure and Commercial Motor Craft
  • NFPA 303Fire Protection Standard for Marinas and Boatyards
  • NFPA 306Standard for the Control of Gas Hazards on Vessels
  • NFPA 307Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves
  • NFPA 312Standard for Fire Protection of Vessels During Construction, Conversion, Repair, and Lay-Up
  • NFPA 318Standard for the Protection of Semiconductor Fabrication Facilities
  • NFPA 326Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair
  • NFPA 328Recommended Practice for the Control of Flammable and Combustible Liquids and Gases in Manholes, Sewers, and Similar Underground Structures
  • NFPA 329Recommended Practice for Handling Releases of Flammable and Combustible Liquids and Gases
  • NFPA 350Guide for Safe Confined Space Entry and Work
  • NFPA 385Standard for Tank Vehicles for Flammable and Combustible Liquids
  • NFPA 386Standard for Portable Shipping Tanks for Flammable and Combustible Liquids
  • NFPA 395Standard for the Storage of Flammable and Combustible Liquids at Farms and Isolated Sites
  • NFPA 400Hazardous Materials Code
  • NFPA 402Guide for Aircraft Rescue and Fire-Fighting Operations
  • NFPA 403Standard for Aircraft Rescue and Fire-Fighting Services at Airports
  • NFPA 405Standard for the Recurring Proficiency of Airport Fire Fighters
  • NFPA 407Standard for Aircraft Fuel Servicing
  • NFPA 408Standard for Aircraft Hand Portable Fire Extinguishers
  • NFPA 409Standard on Aircraft Hangars
  • NFPA 410Standard on Aircraft Maintenance
  • NFPA 412Standard for Evaluating Aircraft Rescue and Fire-Fighting Foam Equipment
  • NFPA 414Standard for Aircraft Rescue and Fire-Fighting Vehicles
  • NFPA 415Standard on Airport Terminal Buildings, Fueling Ramp Drainage, and Loading Walkways
  • NFPA 418Standard for Heliports
  • NFPA 422Guide for Aircraft Accident/Incident Response Assessment
  • NFPA 423Standard for Construction and Protection of Aircraft Engine Test Facilities
  • NFPA 424Guide for Airport/Community Emergency Planning
  • NFPA 430Code for the Storage of Liquid and Solid Oxidizers
  • NFPA 432Code for the Storage of Organic Peroxide Formulations
  • NFPA 434Code for the Storage of Pesticides
  • NFPA 450Guide for Emergency Medical Services and Systems
  • NFPA 471Recommended Practice for Responding to Hazardous Materials Incidents
  • NFPA 472Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents
  • NFPA 473Standard for Competencies for EMS Personnel Responding to Hazardous Materials/Weapons of Mass Destruction Incidents
  • NFPA 475Recommended Practice for Responding to Hazardous Materials Incidents/Weapons of Mass Destruction
  • NFPA 480Standard for the Storage, Handling, and Processing of Magnesium Solids and Powders
  • NFPA 481Standard for the Production, Processing, Handling, and Storage of Titanium
  • NFPA 482Standard for the Production, Processing, Handling, and Storage of Zirconium
  • NFPA 484Standard for Combustible Metals
  • NFPA 485Standard for the Storage, Handling, Processing, and Use of Lithium Metal
  • NFPA 490Code for the Storage of Ammonium Nitrate
  • NFPA 495Explosive Materials Code
  • NFPA 496Standard for Purged and Pressurized Enclosures for Electrical Equipment
  • NFPA 497Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas
  • NFPA 498Standard for Safe Havens and Interchange Lots for Vehicles Transporting Explosives
  • NFPA 499Recommended Practice for the Classification of Combustible Dusts and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas
  • NFPA 501Standard on Manufactured Housing
  • NFPA 501AStandard for Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities
  • NFPA 502Standard for Road Tunnels, Bridges, and Other Limited Access Highways
  • NFPA 505Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operations
  • NFPA 513Standard for Motor Freight Terminals
  • NFPA 520Standard on Subterranean Spaces
  • NFPA 550Guide to the Fire Safety Concepts Tree
  • NFPA 551Guide for the Evaluation of Fire Risk Assessments
  • NFPA 555Guide on Methods for Evaluating Potential for Room Flashover
  • NFPA 556Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles
  • NFPA 557Standard for Determination of Fire Loads for Use in Structural Fire Protection Design
  • NFPA 560Standard for the Storage, Handling, and Use of Ethylene Oxide for Sterilization and Fumigation
  • NFPA 600Standard on Industrial Fire Brigades
  • NFPA 601Standard for Security Services in Fire Loss Prevention
  • NFPA 610Guide for Emergency and Safety Operations at Motorsports Venues
  • NFPA 650Standard for Pneumatic Conveying Systems for Handling Combustible Particulate Solids
  • NFPA 651Standard for the Machining and Finishing of Aluminum and the Production and Handling of Aluminum Powders
  • NFPA 652Standard on Combustible Dusts
  • NFPA 654Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids
  • NFPA 655Standard for Prevention of Sulfur Fires and Explosions
  • NFPA 664Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities
  • NFPA 701Standard Methods of Fire Tests for Flame Propagation of Textiles and Films
  • NFPA 703Standard for Fire Retardant—Treated Wood and Fire–Retardant Coatings for Building Materials
  • NFPA 704Standard System for the Identification of the Hazards of Materials for Emergency Response
  • NFPA 705Recommended Practice for a Field Flame Test for Textiles and Films
  • NFPA 720Standard for the Installation of Carbon Monoxide(CO) Detection and Warning Equipment
  • NFPA 730Guide for Premises Security
  • NFPA 731Standard for the Installation of Electronic Premises Security Systems
  • NFPA 750Standard on Water Mist Fire Protection Systems
  • NFPA 780Standard for the Installation of Lightning Protection Systems
  • NFPA 790Standard for Competency of Third-Party Field Evaluation Bodies
  • NFPA 791Recommended Practice and Procedures for Unlabeled Electrical Equipment Evaluation
  • NFPA 801Standard for Fire Protection for Facilities Handling Radioactive Materials
  • NFPA 803Standard for Fire Protection for Light Water Nuclear Power Plants
  • NFPA 804Standard for Fire Protection for Advanced Light Water Reactor Electric Generating Plants
  • NFPA 805Performance-Based Standard for Fire Protection for Light Water Reactor Electric Generating Plants
  • NFPA 806Performance-Based Standard for Fire Protection for Advanced Nuclear Reactor Electric Generating Plants Change Process
  • NFPA 820Standard for Fire Protection in Wastewater Treatment and Collection Facilities
  • NFPA 850Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations
  • NFPA 851Recommended Practice for Fire Protection for Hydroelectric Generating Plants
  • NFPA 853Standard for the Installation of Stationary Fuel Cell Power Systems
  • NFPA 900Building Energy Code
  • NFPA 901Standard Classifications for Incident Reporting and Fire Protection Data
  • NFPA 902Fire Reporting Field Incident Guide
  • NFPA 903Fire Reporting Property Survey Guide
  • NFPA 904Incident Follow-up Report Guide
  • NFPA 906Guide for Fire Incident Field Notes
  • NFPA 909Code for the Protection of Cultural Resource Properties – Museums, Libraries, and Places of Worship
  • NFPA 914Code for Fire Protection of Historic Structures
  • NFPA 921Guide for Fire and Explosion Investigations
  • NFPA 950Standard for Data Development and Exchange for the Fire Service
  • NFPA 951Guide to Building and Utilizing Digital Information
  • NFPA 1000Standard for Fire Service Professional Qualifications Accreditation and Certification Systems
  • NFPA 1001Standard for Fire Fighter Professional Qualifications
  • NFPA 1002Standard for Fire Apparatus Driver/Operator Professional Qualifications
  • NFPA 1003Standard for Airport Fire Fighter Professional Qualifications
  • NFPA 1005Standard for Professional Qualifications for Marine Fire Fighting for Land-Based Fire Fighters
  • NFPA 1006Standard for Technical Rescuer Professional Qualifications
  • NFPA 1021Standard for Fire Officer Professional Qualifications
  • NFPA 1026Standard for Incident Management Personnel Professional Qualifications
  • NFPA 1031Standard for Professional Qualifications for Fire Inspector and Plan Examiner
  • NFPA 1033Standard for Professional Qualifications for Fire Investigator
  • NFPA 1035Standard on Fire and Life Safety Educator, Public Information Officer, Youth Firesetter Intervention Specialist and Youth Firesetter Program Manager Professional Qualifications
  • NFPA 1037Standard for Professional Qualifications for Fire Marshal
  • NFPA 1041Standard for Fire Service Instructor Professional Qualifications
  • NFPA 1051Standard for Wildland Fire Fighter Professional Qualifications
  • NFPA 1061Professional Qualifications for Public Safety Telecommunications Personnel
  • NFPA 1071Standard for Emergency Vehicle Technician Professional Qualifications
  • NFPA 1072Standard for Hazardous Materials/Weapons of Mass Destruction Emergency Response Personnel Professional Qualifications
  • NFPA 1081Standard for Industrial Fire Brigade Member Professional Qualifications
  • NFPA 1091Standard for Traffic Control Incident Management Professional Qualifications
  • NFPA 1122Code for Model Rocketry
  • NFPA 1123Code for Fireworks Display
  • NFPA 1124Code for the Manufacture, Transportation, Storage, and Retail Sales of Fireworks and Pyrotechnic Articles
  • NFPA 1125Code for the Manufacture of Model Rocket and High Power Rocket Motors
  • NFPA 1126Standard for the Use of Pyrotechnics Before a Proximate Audience
  • NFPA 1127Code for High Power Rocketry
  • PYR 1128Standard Method of Fire Test for Flame Breaks
  • PYR 1129Standard Method of Fire Test for Covered Fuse on Consumer Fireworks
  • NFPA 1141Standard for Fire Protection Infrastructure for Land Development in Wildland, Rural, and Suburban Areas
  • NFPA 1142Standard on Water Supplies for Suburban and Rural Fire Fighting
  • NFPA 1143Standard for Wildland Fire Management
  • NFPA 1144Standard for Reducing Structure Ignition Hazards from Wildland Fire
  • NFPA 1145Guide for the Use of Class A Foams in Manual Structural Fire Fighting
  • NFPA 1150Standard on Foam Chemicals for Fires in Class A Fuels
  • NFPA 1192Standard on Recreational Vehicles
  • NFPA 1194Standard for Recreational Vehicle Parks and Campgrounds
  • NFPA 1201Standard for Providing Fire and Emergency Services to the Public
  • NFPA 1221Standard for the Installation, Maintenance, and Use of Emergency Services Communications Systems
  • NFPA 1231Standard on Water Supplies for Suburban and Rural Fire Fighting
  • NFPA 1250Recommended Practice in Fire and Emergency Service Organization Risk Management
  • NFPA 1300Standard for Community Risk Reduction (CRR) Plans
  • NFPA 1401Recommended Practice for Fire Service Training Reports and Records
  • NFPA 1402Guide to Building Fire Service Training Centers
  • NFPA 1403Standard on Live Fire Training Evolutions
  • NFPA 1404Standard for Fire Service Respiratory Protection Training
  • NFPA 1405Guide for Land-Based Fire Departments that Respond to Marine Vessel Fires
  • NFPA 1407Standard for Training Fire Service Rapid Intervention Crews
  • NFPA 1408Standard for Training Fire Service Personnel in the Operation, Care, Use, and Maintenance of Thermal Imagers
  • NFPA 1410Standard on Training for Emergency Scene Operations
  • NFPA 1451Standard for a Fire and Emergency Services Vehicle Operations Training Program
  • NFPA 1452Guide for Training Fire Service Personnel to Conduct Community Risk Reduction
  • NFPA 1500Standard on Fire Department Occupational Safety and Health Program
  • NFPA 1521Standard for Fire Department Safety Officer Professional Qualifications
  • NFPA 1561Standard on Emergency Services Incident Management System and Command Safety
  • NFPA 1581Standard on Fire Department Infection Control Program
  • NFPA 1582Standard on Comprehensive Occupational Medical Program for Fire Departments
  • NFPA 1583Standard on Health-Related Fitness Programs for Fire Department Members
  • NFPA 1584Standard on the Rehabilitation Process for Members During Emergency Operations and Training Exercises
  • NFPA 1600Standard on Disaster/Emergency Management and Business Continuity Programs
  • NFPA 1616Standard for Mass Evacuation and Sheltering
  • NFPA 1620Standard for Pre-Incident Planning
  • NFPA 1670Standard on Operations and Training for Technical Search and Rescue Incidents
  • NFPA 1710Standard for the Organization and Deployment of Fire Suppression Operations, Emergency Medical Operations, and Special Operations to the Public by Career Fire Departments
  • NFPA 1720Standard for the Organization and Deployment of Fire Suppression Operations, Emergency Medical Operations and Special Operations to the Public by Volunteer Fire Departments
  • NFPA 1730Standard on Organization and Deployment of Fire Prevention Inspection and Code Enforcement, Plan Review, Investigation, and Public Education Operations to the Public
  • NFPA 1801Standard on Thermal Imagers for the Fire Service
  • NFPA 1802Standard on Personal Portable (Hand-Held) Two-Way Radio Communications Devices for Use by Emergency Services Personnel in the Hazard Zone
  • NFPA 1851Standard on Selection, Care, and Maintenance of Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
  • NFPA 1852Standard on Selection, Care, and Maintenance of Open-Circuit Self-Contained Breathing Apparatus (SCBA)
  • NFPA 1855Standard for Selection, Care, and Maintenance of Protective Ensembles for Technical Rescue Incidents
  • NFPA 1858Standard on Selection, Care, and Maintenance of Life Safety Rope and Equipment for Emergency Services
  • NFPA 1901Standard for Automotive Fire Apparatus
  • NFPA 1906Standard for Wildland Fire Apparatus
  • NFPA 1911Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus
  • NFPA 1912Standard for Fire Apparatus Refurbishing
  • NFPA 1914Standard for Testing Fire Department Aerial Devices
  • NFPA 1915Standard for Fire Apparatus Preventive Maintenance Program
  • NFPA 1917Standard for Automotive Ambulances
  • NFPA 1925Standard on Marine Fire-Fighting Vessels
  • NFPA 1931Standard for Manufacturer’s Design of Fire Department Ground Ladders
  • NFPA 1932Standard on Use, Maintenance, and Service Testing of In-Service Fire Department Ground Ladders
  • NFPA 1936Standard on Powered Rescue Tools
  • NFPA 1951Standard on Protective Ensembles for Technical Rescue Incidents
  • NFPA 1952Standard on Surface Water Operations Protective Clothing and Equipment
  • NFPA 1953Standard on Protective Ensembles for Contaminated Water Diving
  • NFPA 1961Standard on Fire Hose
  • NFPA 1962Standard for the Care, Use, Inspection, Service Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances
  • NFPA 1963Standard for Fire Hose Connections
  • NFPA 1964Standard for Spray Nozzles
  • NFPA 1965Standard for Fire Hose Appliances
  • NFPA 1971Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
  • NFPA 1975Standard on Station/Work Uniforms for Emergency Services
  • NFPA 1976Standard on Protective Ensemble for Proximity Fire Fighting
  • NFPA 1977Standard on Protective Clothing and Equipment for Wildland Fire Fighting
  • NFPA 1981Standard on Open-Circuit Self-Contained Breathing Apparatus (SCBA) for Emergency Services
  • NFPA 1982Standard on Personal Alert Safety Systems (PASS)
  • NFPA 1983Standard on Life Safety Rope and Equipment for Emergency Services
  • NFPA 1984Standard on Respirators for Wildland Fire Fighting Operations
  • NFPA 1986Standard on Respiratory Protection Equipment for Technical and Tactical Operations
  • NFPA 1989Standard on Breathing Air Quality for Emergency Services Respiratory Protection
  • NFPA 1991Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies
  • NFPA 1992Standard on Liquid Splash-Protective Ensembles and Clothing for Hazardous Materials Emergencies
  • NFPA 1994Standard on Protective Ensembles for First Responders to CBRN Terrorism Incidents
  • NFPA 1999Standard on Protective Clothing for Emergency Medical Operations
  • NFPA 2001Standard on Clean Agent Fire Extinguishing Systems
  • NFPA 2010Standard for Fixed Aerosol Fire-Extinguishing Systems
  • NFPA 2112Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire
  • NFPA 2113Standard on Selection, Care, Use, and Maintenance of Flame-Resistant Garments for Protection of Industrial Personnel Against Short-Duration Thermal Exposures
  • NFPA 5000Building Construction and Safety Code
  • NFPA 8501Standard for Single Burner Boiler Operation
  • NFPA 8502Standard for the Prevention of Furnace Explosions/Implosions in Multiple Burner Boilers
  • NFPA 8503Standard for Pulverized Fuel Systems
  • NFPA 8504Standard on Atmospheric Fluidized-Bed Boiler Operation
  • NFPA 8505Standard for Stoker Operation
  • NFPA 8506Standard on Heat Recovery Steam Generator Systems

 

Synthetic turf

27 Dec 2014 Comments
Off

Product : Synthetic turf 

아래는 UFGS 관련 인조잔디에 대한 적합성 시험항목입니다.

1. Yarn Number Based on Short-Length Specimens ASTM D1059-01

2. Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (CRE Testing Machine) ASTM D2261-11

3. Identification of Fibers in Textiles ASTM D276-00a (2008)

4. Tuft Bind of Pile Yarn Floor Coverings ASTM D1335-12

5. Tensile Properties of Yarns by the Single-Strand Method . Option A (Straight) ASTM D2256/D2256M-10

6. Ignition Characteristics of Finished Textile Floor Covering Materials ASTM D2859-06

7. Water Permeability of Geotextiles by Permittivity ASTM D4491 – 99a (2014)e1

8. Breaking Strength and Elongation of Textile Fabrics (Grab Test) ASTM D5034-09 (2013)

9. Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings ASTM D5793-05

10. Tuft Height of Pile Floor Coverings ASTM D5823-05a11

11. Mass Per Unit Area of Pile Yarn Floor Coverings – Total Mass per Unit Area ASTM D5848-10e1 Section 7

12. Mass Per Unit Area of Pile Yarn Floor Coverings – Component Masses per Unit Area ASTM D5848-10e1 Section 8

13. Mass Per Unit Area of Pile Yarn Floor Coverings – Pile Yarn Mass per Unit Area ASTM D5848-10e1 Section 9

14. Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source ASTM E 648-10e¹

15. Melting and Crystallization Temperature by Thermal Analysis ASTM E794-06 (2012)

16. Relative Abrasiveness of Synthetic Turf Playing Surfaces ASTM F1015-03 (2009)

 

Turkmenistan Certificate TDS

05 Dec 2014 Comments
Off

Turkmenistan Certificate TDS 인증서

TDS2

- 투르크메니스탄은 자국 내로 수입되는 제품에 대해  제품인증의 취득을 요구하고 있습니다. 특히측정에 사용되는 계측장비는 “Turkmenstandartlary.”의 관련 규정에 따라 교정되어야 합니다. 1998 년경, 투르크메니스탄으로 수입되는 식품류에 대해 위생관련 인증요구 사항이 발효되었습니다. 국가 위생 및 역학 검사기관(SSEI)이 적합성인증서를 발행하기 위한 시험을 수행하며 이러한 식품류에는 필수적으로 러시아 언어로 표기된 제품설명서를 부착하여야 합니다.

 

 

투르크메니스탄의 state system of certifcation의 인증조직구조 :

TDS1

  • The State agency for Certification of products and services
    (Glavgosinspektsiya Turkmenistan);
  • Bodies for certification of products and services;
  • Testing laboratories (centers)

 

 

 

 

강제인증 대상 :

  • 국가 표준 및 기타 문서에 따라 안전 및 보건, 품질 및 환경관련 주요 품목은 해당 규격 및 법규  TDS 1.2 에서 품목의  적함함을 보장토록 요구하는 모든  대상물품, 작업 및 서비스 품목을 강제 인증대상으로 규정하고 관리함.[ HS code  분류 목록의 최신 개정을 확인할 필요 있음. 문의바로가기  ]
  • 관련 규정에 의해 인증을 취득한 제품관련 정보는 State Certification Registry에 등록하고 제품에는 해당 마크를 부착하여야 함.

참고 :

  • 일상적 통관절차는 예상보다 다소 늦게 진행되며 엄격한 법적용 등으로 인해 관료적이라는 평판이 있음.
  • 품목의 가격타당성은 최고 상공 회의에 의해 참조되고 모든 품목은 수입전에 관련기관에 필수적으로 등록되어야 하며 이러한 절차를 처음 경험하는 경우 상당한 어려움이 있을 수 있음. [BIRJA etc.]
  • 물품의 수출 수입에 관련하여 State Commodity and Raw Materials Exchange (SCRME) : [물품 및 원자재 거래소]에 등록하여야 함.
  • 일부 투자  또는 Civil construction 의 경우, Ministry of Economy and Development에 의한 승인이 요구될 수 있음.
  • 상사 분쟁의 경우, Turkmenistan은 2012년 현재까지 New York Convention on International Arbitration에 가입하지 않아 상사간 분쟁을  중재할 조직이 없음.

 

 

ASTM D6878 – on TPO membrane Analysis

건축자재 인증 및 시험 관련 규격

Download : Analysis of one TPO membrane per ASTM D6878_D6878M-13

Analysis of one TPO membrane per ASTM D6878/D6878M-13.

아래는 적용되는 분석기법입니다.

    1. ASTM D 6878/D : Brittleness Point per ASTM D2137, Method B
    2. ASTM D 6878/D : Ozone Resistance per ASTM D 1149 (Exposed to 100 mPa ozone in air @40°C, wrapped around a 3″ mandrel for 166 hrs exposure) – OUTSOURCED
    3. ASTM D 6878/D : Breaking Strength per ASTM D751, grab method – MD
    4. ASTM D 6878/D : Breaking Strength per ASTM D751, grab method – XMD
    5. ASTM D 6878/D : Elongation at Reinforcement Break per ASTM D751, grab method – MD
    6. ASTM D 6878/D : Elongation at Reinforcement Break per ASTM D751, grab method – XMD
    7. ASTM D 6878/D : Factory Seam Strength @ 2 in/min (12 in x 1 in specimen) per ASTM D751,grab method
    8. ASTM D 6878/D : Heat Aging, 5376 hrs (224 days) @ 116°C, per ASTM D573
    9. ASTM D 6878/D : Linear Dimensional Change, 6 hr @ 70°C (158°F), per ASTM D1204
    10. ASTM D 6878/D : Post Heat Aging: Breaking Strength per ASTM D751, grab method – MD
    11. ASTM D 6878/D : Post Heat Aging: Breaking Strength per ASTM D751, grab method – XMD
    12. ASTM D 6878/D : Post Heat Aging: Elongation at Reinforcement Break per ASTM D751, grab method – MD
    13. ASTM D 6878/D : Post Heat Aging: Elongation at Reinforcement Break per ASTM D751, grab method – XMD
    14. ASTM D 6878/D : Post Heat Aging: Tearing Strength, 2 in/min (8 in x 8 in specimen) per ASTMD751 – MD
    15. ASTM D 6878/D : Post Heat Aging: Tearing Strength, 2 in/min (8 in x 8 in specimen) per ASTMD751 – XMD
    16. ASTM D 6878/D : Post Heat Aging: Weight Change (mass)
    17. ASTM D 6878/D : Tearing Strength, 2 in/min (8 in x 8 in specimen), per ASTM D751 – MD
    18. ASTM D 6878/D : Tearing Strength, 2 in/min (8 in x 8 in specimen), per ASTM D751 – XMD
    19. ASTM D 6878/D : Thickness, Coating Over Fabric or Scrim (weathering side only) per ASTM D7635
    20. ASTM D 6878/D : Thickness, Sheet-Overall per ASTM D751
    21. ASTM D 6878/D : Water Absorption, 166 hrs @ 70°C (158°F) (mass) per ASTM D471 – Performed on top coating material ONLY
    22. ASTM D 6878/D : Weather Resistance per ASTM G 155 at 0.35 W/(m²•nm) at 340 nm (8000 hrs)

22. MISCELLANEOUS MATERIALS

건설자재 시험 및 인증 관련 규격목록 22

22. MISCELLANEOUS MATERIALS

22-1)        ANSI A108.10-2009 ; Installation of Grout in Tilework;

22-2)        ANSI A108.1-2009 ; Specification for the Installation of Ceramic Tile with Portland Cement Mortar;

22-3)        ANSI A108.4-2009 ; Installation of Ceramic Tile with Organic Adhesives or Water Cleanable Tile Setting Epoxy Adhesive;

22-4)        ANSI A108.5-2009 ; Installation of Ceramic Tile with Dry-Set Portland Cement Mortar or Latex-Portland Cement Mortar;

22-5)        ANSI A108.6-2009 ; Installation of Ceramic Tile with Chemical Resistant, Water Cleanable Tile Setting and Grouting Epoxy;

22-6)        ANSI A108.7-2009 ; Specification for Electrically Conductive Ceramic Tile Installed with Conductive Dry-Set Portland Cement Mortar;

22-7)        ANSI A108.8-2009 ; Installation of Ceramic Tile with Chemical Resistant Furan Mortar and Grout;

22-8)        ANSI A108.9-2009 ; Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout;

22-9)        ANSI A118.1-2009 ; Specification for Dry-Set Portland Cement Mortar;

22-10)      ANSI A118.2-2009 ; Specifications for Conductive Dry-set Portland Cement Mortar;

22-11)      ANSI A118.3-2009 ; Specifications for Chemical Resistant Water Cleanable Tile Setting and Grouting Epoxy and Water Cleanable Tile Setting Epoxy Adhesive;

22-12)      ANSI A118.4-2009 ; Specifications Furan Latex – Portland Cement Mortar;

22-13)      ANSI A118.5-2009 ; Specifications for Chemical Resistant Furan;

22-14)      ANSI A118.6-2009 ; Specifications for Ceramic Tile Grouts;

22-15)      ANSI A118.8-2009 ; Specifications for Modified Epoxy Emulsion Mortar/Grout;

22-16)      ANSI A136.1-2009 ; Organic Adhesives for Installation of Ceramic Tile;

22-17)      ANSI A137.1-2008 ; Specification for Ceramic Tile;

22-18)      ANSI A137.1-2008 ; Specifications for Ceramic Tile;

22-19)      ANSI Z 97.1-2009 ; Safety Performance Specifications and Methods of Tests for Transport Safety Glazing Materials Used in Building;

22-20)      ASTM A116 – 05 ASTM A121 – 07 ; Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

22-21)      ASTM A121 – 07 ; Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

22-22)      ASTM A368 – 95a(2009) ; Standard Specification for Stainless Steel Wire Strand

22-23)      ASTM A392 – 07 ; Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

22-24)      ASTM A475 – 03(2009)e1 ; Standard Specification for Zinc-Coated Steel Wire Strand

22-25)      ASTM A492 – 95(2009) ; Standard Specification for Stainless Steel Rope Wire

22-26)      ASTM A510 – 08 ; Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel

22-27)      ASTM A586 – 04a(2009)e1 ; Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

22-28)      ASTM A603 – 98(2009)e1 ; Standard Specification for Zinc-Coated Steel Structural Wire Rope

22-29)      ASTM A817 – 07 ; Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

22-30)      ASTM A824 – 01(2007) ; Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

22-31)      ASTM C1014 – 08 ; Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation

22-32)      ASTM C1029 – 09 ; Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

22-33)      ASTM C1036 – 06 ; Standard Specification for Flat Glass

22-34)      ASTM C1048 – 04 ; Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass

22-35)      ASTM C1071 – 05e1 ; Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

22-36)      ASTM C1193 – 09 ; Standard Guide for Use of Joint Sealants

22-37)      ASTM C1193 – 09 ; Standard Guide for Use of Joint Sealants

22-38)      ASTM C126 – 09 ; Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

22-39)      ASTM C126 – 09 ; Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

22-40)      ASTM C1363 – 05 ; Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

22-41)      ASTM C167 – 09 ; Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

22-42)      ASTM C177 – 04 ; Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

22-43)      ASTM C195 – 07 ; Standard Specification for Mineral Fiber Thermal Insulating Cement

22-44)      ASTM C196 – 00(2005) ; Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement

22-45)      ASTM C208 – 08a ; Standard Specification for Cellulosic Fiber Insulating Board

22-46)      ASTM C209 – 07ae1 ; Standard Test Methods for Cellulosic Fiber Insulating Board

22-47)      ASTM C240 – 08e1 ; Standard Test Methods of Testing Cellular Glass Insulation Block

22-48)      ASTM C335 – 05ae1 ; Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

22-49)      ASTM C411 – 05 ; Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

22-50)      ASTM C449 – 07 ; Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

22-51)      ASTM C509 – 06 ; Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

22-52)      ASTM C516 – 08 ; Standard Specification for Vermiculite Loose Fill Thermal Insulation

22-53)      ASTM C518 – 04 ; Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

22-54)      ASTM C520 – 04 ; Standard Test Methods for Density of Granular Loose Fill Insulations

22-55)      ASTM C533 – 09 ; Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

22-56)      ASTM C534 / C534M – 08 ; Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

22-57)      ASTM C542 – 05 ; Standard Specification for Lock-Strip Gaskets

22-58)      ASTM C547 – 07e1 ; Standard Specification for Mineral Fiber Pipe Insulation

22-59)      ASTM C549 – 06 ; Standard Specification for Perlite Loose Fill Insulation

22-60)      ASTM C552 – 07 ; Standard Specification for Cellular Glass Thermal Insulation

22-61)      ASTM C553 – 08 ; Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

22-62)      ASTM C564 – 09a ; Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

22-63)      ASTM C578 – 09e1 ; Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

22-64)      ASTM C591 – 09 ; Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

22-65)      ASTM C592 – 08a ; Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

22-66)      ASTM C610 – 09e1 ; Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

22-67)      ASTM C612 – 09 ; Standard Specification for Mineral Fiber Block and Board Thermal Insulation

22-68)      ASTM C665 – 06 ; Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

22-69)      ASTM C716 – 06 ; Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

22-70)      ASTM C719 – 93(2005) ; Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

22-71)      ASTM C726 – 05e1 ; Standard Specification for Mineral Fiber Roof Insulation Board

22-72)      ASTM C728 – 05(2010) ; Standard Specification for Perlite Thermal Insulation Board

22-73)      ASTM C739 – 08 ; Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

22-74)      ASTM C764 – 07 ; Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

22-75)      ASTM C794 – 06 ; Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

22-76)      ASTM C834 – 10 ; Standard Specification for Latex Sealants

22-77)      ASTM C864 – 05 ; Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

22-78)      ASTM C916 – 85(2007) ; Standard Specification for Adhesives for Duct Thermal Insulation

22-79)      ASTM C919 – 08 ; Standard Practice for Use of Sealants in Acoustical Applications

22-80)      ASTM C920 – 08 ; Standard Specification for Elastomeric Joint Sealants

22-81)      ASTM C991 – 08e1 ; Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

22-82)      ASTM D1003 – 07e1 ; Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

22-83)      ASTM D1044 – 08 ; Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

22-84)      ASTM D1204 – 08 ; Standard Test Method for Linear Dimensional Changes of Nonrigid

22-85)      ASTM D1327 – 04 ; Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing

22-86)      ASTM D146 – 04 ; Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

22-87)      ASTM D1593 – 09 ; Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

22-88)      ASTM D1668 – 97a(2006) ; Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing

22-89)      ASTM D173 – 03 ; Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing

22-90)      ASTM D2103 – 08 ; Standard Specification for Polyethylene Film and Sheeting

22-91)      ASTM D2126 – 09 ; Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

22-92)      ASTM D2178 – 04 ; Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

22-93)      ASTM D226 / D226M – 09 ; Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

22-94)      ASTM D227 – 03 ; Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

22-95)      ASTM D25 – 99(2005) ; Standard Specification for Round Timber Piles

22-96)      ASTM D2626 – 04 ; Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

22-97)      ASTM D2628 – 91(2005) ; Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

22-98)      ASTM D2842 – 06 ; Standard Test Method for Water Absorption of Rigid Cellular Plastics

22-99)      ASTM D2843 – 10 ; Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

22-100)    ASTM D3294 – 09 ; Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes

22-101)    ASTM D3406 – 95(2006) ; Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements

22-102)    ASTM D3468 – 99(2006)e1 ; Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

22-103)    ASTM D3667 – 05 ; Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors

22-104)    ASTM D3678 – 97(2008)e1 ; Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions

22-105)    ASTM D3679 – 09a ; Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

22-106)    ASTM D3771 – 03(2007) ; Standard Specification for Rubber Seals Used in Concentrating Solar Collectors

22-107)    ASTM D3832 – 79(2006) ; Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems

22-108)    ASTM D3841 – 97(2008)e1 ; Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

22-109)    ASTM D41 – 05 ; Standard Specification for Asphalt Primer Used in Roofing, Damp proofing, and Waterproofing

22-110)     ASTM D43 – 00(2006) ; Standard Specification for Coal Tar Primer Used in Roofing, Damp proofing, and Waterproofing

22-111)     ASTM D449 – 03(2008) ; Standard Specification for Asphalt Used in Damp proofing and Waterproofing

22-112)     ASTM D450 – 07 ; Standard Specification for Coal-Tar Pitch Used in Roofing, Damp proofing, and Waterproofing

22-113)     ASTM D4802 – 02 ; Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

22-114)     ASTM D543 – 06 ; Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

22-115)     ASTM D635 – 06 ; Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

22-116)     ASTM D638 – 08 ; Standard Test Method for Tensile Properties of Plastics

22-117)     ASTM D6380 – 03(2009) ; Standard Specification for Asphalt Roll Roofing (Organic Felt)

22-118)     ASTM D6690 – 07 ; Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

22-119)     ASTM D695 – 08 ; Standard Test Method for Compressive Properties of Rigid Plastics

22-120)    ASTM D882 – 09 ; Standard Test Method for Tensile Properties of Thin Plastic Sheeting

22-121)    ASTM E119 – 09c ; Standard Test Methods for Fire Tests of Building Construction and Materials

22-122)    ASTM E84 – 10 ; Standard Test Method for Surface Burning Characteristics of Building Materials

22-123)    ASTM F1183 – 96(2006) ; Standard Specification for Aluminum Alloy Chain Link Fence Fabric

22-124)    BDS 1301 : 1990 ; Specification for Glazed Earthenware Wall Tiles;

22-125)    BDS 1301:1990 ; Specification for Glazed Earthenware Wall Tiles;

22-126)    BDS 1493:1994 ; Glossary of terms used in refractory

22-127)    BDS 1494:1994 ; Dimension of refractory bricks

22-128)    BDS 1495:1994 ; High aluminium refractory bricks

22-129)    BDS 809:1973 ; Specification for Wood Poles for Overhead Power and Telecommunication Lines;

22-130)    BDS 885:1979 ; Method for Measuring Viscosity Number and K-Value of PVC Resins;

22-131)    BDS 886:1978 ; Method for Direct Measuring the Specific Gravity of Plastics;

22-132)    BDS 887:1978 ; Method for Measuring Deformation under Heat of Flexible Rigid PVC Compounds;

22-133)    BDS 888:1978 ; Method for Measuring Temperature of Deflection under Load;

22-134)    BDS 889:1978 ; Method for Measuring the Vicat Softening Temperature (VST) of Thermoplastics;

22-135)    BDS 890:1978 ; Method for Measuring the Water Absorption at Room Temperature and Bolling Water Absorption of Plastics;

22-136)    BDS 891:1978 ; Method for Measuring the Flexural Modulus of Plastics;

22-137)    BDS 892:1978 ; Method for Measuring the Resistance to Tear Propagation of Flexible Plastics, Film or Sheeting;

22-138)    BS 6431 ; Floor and Wall Tiles;

22-139)    BS 6431 Part 1 1983 ; Specification for Classification and Making, Including Definitions and Characteristics;

22-140)    BS 6431 Part 1 to Part 23 ; Ceramic Floor and Wall Tiles.

22-141)    BS 6431 Part 10 1984 ; Method for Determination of Dimensions and Surface Quality;

22-142)    BS 6431 Part 11 1983 ; Method for Determination of Water Absorption;

22-143)    BS 6431 Part 12 1983 ; Method for Determination of Modulus of;

22-144)    BS 6431 Part 13 1986 ; Method for Determination of Scratch Hardness of Surface According to Mhos;

22-145)    BS 6431 Part 14 1983 ; Method for Determination of Resistance to Abrasion of Unglazed Tiles;

22-146)    BS 6431 Part 15 1983 ; Method for Determination of Linear Thermal Expansion;

22-147)    BS 6431 Part 16 1983 ; Method for Determination of Resistance to Thermal Shock;

22-148)    BS 6431 Part 17 1983 ; Method for Determination of Crazing Resistance-Glazed Tiles;

22-149)    BS 6431 Part 18 1983 ; Method for Determination of Chemical Resistance-Unglazed Tiles;

22-150)    BS 6431 Part 19 1984 ; Method for Determination of Chemical Resistance-Unglazed Tiles;

22-151)    BS 6431 Part 2 1984 ; Specification for Struded Ceramic Tiles with Low Water Absorption (E< 3%) Group A1;

22-152)    BS 6431 Part 20 1984 ; Method for Determination of Resistance to Surface Abrasion-Glazed Tiles;

22-153)    BS 6431 Part 23 1986 ; Specification for Sampling and Basis for Acceptance;

22-154)    BS 6431 Part 3 ; Extruded Ceramic Tiles with a Water Absorption of 3% < 6%. Group A 11a;

22-155)    BS 6431 Part 3 Section 3.1 1986 ; Specification for General Products;

22-156)    BS 6431 Part 3 Section 3.2 1986 ; Specification for Products Terre Cuite, Cotto, Baldosion Catalan;

22-157)    BS 6431 Part 4 ; Extruded Ceramic Tiles with a Water Absorption of 6% <E< 10%. Group A11b;

22-158)    BS 6431 Part 4 ; Section 4.2 1986

22-159)    BS 6431 Part 4 ; Specification for General Products;

22-160)   BS 6431 Part 5 1986 ; Specification for Extruded Ceramic Tiles with a Water Absorption of E>10%, Group A111;

22-161)    BS 6431 Part 6 1984 ; Specification for Dust-prestressed Ceramic Tiles with a Low-Water Absorption (E<3%)Group B1;

22-162)   BS 6431 Part 7 1986 ; Specification for Dust-prestressed Ceramic Tiles with a Water Absorption of 3% <E £ 6%. Group B11a;

22-163)   BS 6431 Part 8 1986 ; Specification for Dust-prestressed Ceramic Tiles with Water Absorption of 6% < E £ 10%. Group B11b;

22-164)    BS 6431 Part 9 1984 ; Specification for Dust-Prestressed Ceramic Tiles with a Water Absorption of E >10%. Group B111;

22-165)    IS 10102:1982 ; Technical supply conditions for Rivets.

22-166)    IS 110:1968 ; Specification for Ready Mixed Paint, Brushing, Grey Filler, for Enamels, for Use Over Primers (First Revision);

22-167)    IS 1900:1974 ; Method of Testing Wood Poles;

22-168)    IS 1902:1961 ; Code of Practice for Preservation of Bamboo and Cane for Non-structural Purposes;

22-169)    IS 1929:1982 ; Specification for Hot Forged Steel Rivets for Hot Closing (12 to 36 mm diameter) (First Revision);

22-170)    IS 2155:1982 ; Specification for Cold-Forged Solid Steel Rivets for Hot Closing (6 to 16 mm diameter) (First Revision);

22-171)    IS 2365:1977 ; Specification for Steel Wire Suspension Ropes for Lifts, Elevators and Hoists (First Revision).

22-172)    IS 2643:1975 ; Dimensions for Pipe Threads for Fastening Purposes;

22-173)    IS 2907:1964 ; Specification for Non-ferrous Rivets (1.6 mm to 10 mm)

22-174)    IS 2998:1981 ; Specification for Cold Forged Steel Rivets for Cold Closing (1 to 16 mm diameter) (First Revision);

22-175)    IS 3337:1978 ; Specification for Ballies for General Purposes (First Revision);

22-176)    IS 345:1952 ; Specification for Wood Filler, Transparent, Liquid;

22-177)    IS 3709:1966 ; Specification for Mastic Cement for Bedding of Metal Windows;

22-178)    IS 419:1967 ; Specification for Putty for Use on Window Frames (First Revision);

22-179)    IS 421:1953 ; Specification for Jointing Paste, for Bedding Moldings on Coaching Stock;

22-180)    IS 423:1961 ; Specification for Plastic Wood, for Joiners’ Filler (revised);

22-181)    IS 424:1965 ; Specification for Plastic Asphalt (revised);

22-182)    IS 554:1975 ; Dimensions for Pipe Threads where Pressure Tight Joints are Required on the Threads (Second Revision);

22-183)    IS 6711:1972 ; Code of Practice for Maintenance of Wood Poles for Overhead Power and Telecommunications Lines.

22-184)    IS 6874:1973 ; Method of Tests for Round Bamboos;

22-185)    IS 7164:1973 ; Specification for Stopper.

22-186)    IS 8242:1976 ; Methods of Tests for Split Bamboo;

22-187)    IS 8295:1976 ; Specification for Bamboo Chicks, Part I Fine;

22-188)    IS 9096:1979 ; Code of Practice for Preservation of Bamboos for Structural Purposes.

22-189)    ISO 10080:1990 ; Refractory Products-Classification of Dense, Shaped Acid-Resisting Products;

22-190)    ISO 10081:1991 ; Basic Refractory Products-Classification-Part I: Products Containing Less Than 7% Residual Carbon.

22-191)    ISO 10563:1991 ; Building Construction-Sealants for Joints-Determination of Change in Mass and Volume;

22-192)    ISO 10590:1991 ; Building Construction-Sealants-Determination of Adhesion/Cohesion Properties at Maintained Extension after Immersion in Water;

22-193)    ISO 10591 : 1991 ; Building Construction-Sealants-Determination of Adhesion/Cohesion Properties after Immersion in Water.

22-194)    ISO 1109:1975 ; Refractory Products-Classification of Dense Shaped Refractory Products;

22-195)    ISO 1146:1988 ; Pyrometric Reference Cones for Laboratory Use-Specification;

22-196)    ISO 1893:1989 ; Refractory Products-Determination of Refractoriness-Under-Load (differential with rising temperature);

22-197)    ISO 1927:1984 ; Prepared Unshaped Refractory Materials (Dense and Insulating) Classification;

22-198)    ISO 2245:1990 ; Shaped Insulating Refractory Products-Classification;

22-199)    ISO 2444 : 1988 ; Joints in Buildings-Vocabulary;

22-200)    ISO 2477:1987 ; Shaped Insulating Refractory Products-Determination of Permanent Change in Dimensions on Heating;

22-201)    ISO 2478:1987 ; Dense Shaped Refractory Products-Determination of Permanent Change in Dimensions on Heating;

22-202)    ISO 3187:1989 ; Refractory Products-Determination of Creep in Compression;

22-203)    ISO 3867:1982 ; Agglomerated Cork-Material of Expansion Joints for Construction and Building Test-Methods;

22-204)    ISO 3869:1981 ; Agglomerated Cork-Filler Material of Expansion Joints for Construction and Buildings -Characteristics, Sampling and Packing;

22-205)    ISO 3934:1978 ; Rubber Building Gaskets-Materials in Preformed Solid Vulcanizates Used for Sealing Glazing and Panels-Specification;

22-206)    ISO 3934:1978 ; Rubber Building Gaskets-Materials in Preformed Solid Vulcanizates Used for Sealing Glazing and Panels-Specification;

22-207)    ISO 4633:1983 ; Rubber Seals-Joint Rings for Water Supply, Drainage and Sewerage Pipelines-Specification for Materials;

22-208)    ISO 4633:1983 ; Rubber Seals-Joint Rings for Water Supply, Drainage and Sewerage Pipelines-Specifications for Materials;

22-209)    ISO 4635:1982 ; Rubber, Vulcanized-Preformed Compression Seals for Use

22-210)    ISO 4635:1982 ; Rubber, Vulcanized-Preformed Compression Seals for Use Between Concrete Motorway Paving Sections-Specification for Material;

22-211)     ISO 5013:1985 ; Refractory Products-Determination of Modulus of Rupture at Elevated Temperatures;

22-212)    ISO 5014:1986 ; Refractory Products-Determination of Modulus of Rupture at Ambient Temperature;

22-213)    ISO 5015-6:1984 ; Refractory Bricks-Dimensions-Part 6: Basic Bricks for Oxygen Steel Making Converters;

22-214)    ISO 5016:1986 ; Shaped Insulating Refractory Products-Determination of Bulk Density and True Porosity;

22-215)    ISO 5017:1988 ; Dense Shaped Refractory Products-Determination of Bulk Density,

22-216)    ISO 5018:1983 ; Refractory Materials-Determination of True Density;

22-217)    ISO 5019-1:1984 ; Refractory Bricks-Dimensions-Part I: Rectangular Bricks;

22-218)    ISO 5019-2:1984 ; Refractory Bricks-Dimensions-Part 2: Arch Bricks;

22-219)    ISO 5019-3:1984 ; Refractory Bricks-Dimensions-Part 3: Rectangular Checker Bricks for Regenerative Furnace;

22-220)    ISO 5022:1979 ; Shaped Refractory Products-Sampling and Acceptance Testing;

22-221)    ISO 528:1983 ; Refractory Products-Determination of Pyrometric Cone Equivalent (refractoriness);

22-222)    ISO 5417-1986 ; Refractory Bricks for Use in Rotary Kilns-Dimensions;

22-223)    ISO 5419-4:1988 ; Refractory Bricks-Dimensions-Part 4: Dome Bricks for Electric arc Furnace Roofs;

22-224)    ISO 5892:1981 ; Rubber Building Gaskets-Materials for Preformed Solid Vulcanized Structural Gaskets-Specification;

22-225)    ISO 5892:1981 ; Rubber Building Gaskets-Materials for Preformed Solid Vulcanized Structural Gaskets-Specification;

22-226)    ISO 6447:1983 ; Rubber Seals-Joint Rings Used for Gas Supply Pipes and Fittings-Specification for Material;

22-227)    ISO 6447:1991 ; Rubber Seals-Joint Rings Used for Gas Supply Pipes and Fittings- Specification for Material;

22-228)    ISO 6589:1983 ; Joints in Building-Laboratory Method of Test for Air Permeability of Joints;

22-229)    ISO 7389:1987 ; Building Construction-Jointing Products-Determination of Elastic Recovery;

22-230)    ISO 7390:1987 ; Building Construction-Jointing Products-Determination of Resistance to Flow;

22-231)    ISO 7727:1984 ; Joints in Building-Principles for Jointing of Building Components-Accommodation of Dimensional Deviations During Construction;

22-232)    ISO 8339:1984 ; Building Construction-Jointing Products-Sealants-Determination of Tensile Properties;

22-233)    ISO 8340:1984 ; Building Construction-Jointing Products-Sealants-Determination of Tensile Properties at Maintained Extension;

22-234)    ISO 8394:1988 ; Building Construction-Jointing Products-Determination of Extrudability of One-Component Sealants;

22-235)    ISO 8656:1988 ; Refractory Products-Sampling of Raw Materials and Unshaped Products;

22-236)    ISO 8840:1987 ; Refractory Materials-Determination of Bulk Density of Granular Materials (Grain Density);

22-237)    ISO 8890:1988 ; Dense Shaped Refractory Products-Determination of Resistance to Sulfuric Acid;

22-238)    ISO 8894-1:1987 ; Refractory Materials-Determination of Thermal Conductivity-

22-239)    ISO 8894-2:1990 ; Refractory Materials-Determination of Thermal Conductivity-

22-240)    ISO 8895:1986 ; Shaped Insulating Refractory Products-Determination of Cold Crushing Strength;

22-241)    ISO 9046:1987 ; Building Construction-Sealants-Determination of Adhesion/ Cohesion Properties at Constant Temperature;

22-242)    ISO 9047:1989 ; Building Construction-Sealants-Determination of Adhesion/ Cohesion Properties at Variable Temperatures;

22-243)    ISO 9205:1988 ; Refractory Bricks for Use in Rotary Kilns-Hot-face Identification Marking;

22-244)    ISO 9331:1991 ; Rubber Seals Joint Rings for Hot Water Supply Pipelines up to 110oC Specifications for the Material.

22-245)    ISO 9631:1991 ; Rubber Seals-Joint Rings for Hot Water Supply Pipelines up to 110oC Specifications for the Material;1-1)             ANSI A108.1-2009 ; Specifications for the Installation of Ceramic Tile with Portland Cement Mortar;

21. SANITARY APPLIANCES AND WATER FITTINGS

건설자재 시험 및 인증 관련 규격목록 21

21. SANITARY APPLIANCES AND WATER FITTINGS

21-1)        ASTM A377 – 03(2008)e1 ; Standard Index of Specifications for Ductile-Iron Pressure Pipe

21-2)        ASTM A53 / A53M – 07 ; Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

21-3)        ASTM A74 – 09 ; Standard Specification for Cast Iron Soil Pipe and Fittings

21-4)        ASTM B209 – 07 ; Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

21-5)        ASTM B251 – 02e1 ; Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

21-6)        ASTM B302 – 07 ; Standard Specification for Threadless Copper Pipe, Standard Sizes

21-7)        ASTM B306 – 09 ; Standard Specification for Copper Drainage Tube (DWV)

21-8)        ASTM B42 – 02e1 ; Standard Specification for Seamless Copper Pipe, Standard Sizes

21-9)        ASTM B42 – 02e1 ; Standard Specification for Seamless Copper Pipe, Standard Sizes

21-10)      ASTM B429 / B429M – 06 ; Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

21-11)      ASTM B43 – 09 ; Standard Specification for Seamless Red Brass Pipe, Standard Sizes

21-12)      ASTM B447 – 07 ; Standard Specification for Welded Copper Tube

21-13)      ASTM B745 / B745M – 97(2005) ; Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

21-14)      ASTM B75 – 02 ; Standard Specification for Seamless Copper Tube

21-15)      ASTM B88 – 09 ; Standard Specification for Seamless Copper Water Tube

21-16)      ASTM C14 – 07 ; Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe

21-17)      ASTM C425 – 04(2009) ; Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

21-18)      ASTM C443 – 05ae1 ; Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

21-19)      ASTM C508 / C508M – 00(2009)e1 ; Standard Specification for Asbestos-Cement Underdrain Pipe

21-20)      ASTM C564 – 09a ; Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

21-21)      ASTM C654 – 05a ; Standard Specification for Porous Concrete Pipe

21-22)      ASTM C700 – 09 ; Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated

21-23)      ASTM C76 – 10a ; Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

21-24)      ASTM D1527 – 99(2005) ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80

21-25)      ASTM D1785 – 06 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

21-26)      ASTM D1869 – 95(2005)e1 ; Standard Specification for Rubber Rings for Asbestos-Cement Pipe

21-27)      ASTM D2235 – 04 ; Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

21-28)      ASTM D2239 – 03 ; Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

21-29)      ASTM D2241 – 09 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

21-30)      ASTM D2321 – 09 ; Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications ASTM D2464 – 06 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

21-31)      ASTM D2466 – 06 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40ASTM D2467 – 06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

21-32)      ASTM D2564 – 04(2009)e1 ; Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems

21-33)      ASTM D2609 – 02(2008) ; Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

21-34)      ASTM D2657 – 07 ; Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings

21-35)      ASTM D2661 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

21-36)      ASTM D2661 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

21-37)      ASTM D2665 – 09 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

21-38)      ASTM D2672 – 96a(2009) ; Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement

21-39)      ASTM D2729 – 03 ; Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

21-40)      ASTM D2737 – 03 ; Standard Specification for Polyethylene (PE) Plastic Tubing

21-41)      ASTM D2751 – 05 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings

21-42)      ASTM D2846 / D2846M – 09b ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

21-43)      ASTM D2846 / D2846M – 09b ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

21-44)      ASTM D2855 – 96(2010) ; Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings

21-45)      ASTM D2949 – 01a(2008)e1 ; Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

21-46)      ASTM D3034 – 08 ; Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

21-47)      ASTM D3139 – 98(2005) ; Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

21-48)      ASTM D3212 – 07 ; Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

21-49)      ASTM F402 – 05 ; Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

21-50)      ASTM F405 – 05 ; Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings

21-51)      ASTM F409 – 02(2008) ; Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

21-52)      ASTM F437 – 09 ; Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

21-53)      ASTM F438 – 09 ; Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

21-54)      ASTM F441 / F441M – 09 ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

21-55)      ASTM F442 / F442M – 09 ; Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)

21-56)      ASTM F493 – 04 ; Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

21-57)      ASTM F628 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

21-58)      ASTM F628 – 08 ; Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

21-59)      ASTM F656 – 08 ; Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

21-60)      ASTM F891 – 09 ; Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

21-61)      BDS 1111:1984 ; Centrifugally Cast (spun) Iron Pressure Pipes for Water, Gas and Sewage;

21-62)      BDS 1162 : 2006 (1st revision) ; Ceramic wash basin and pedestal, ceramic wash basin and pedestals dimension, design & construction, type, permissible deviation

21-63)      BDS 1163 : 1987 ; Specification for Vitreous Sanitary Appliances,

21-64)      BDS 1356:1992 ; Specification for Ferrules for Water Services;

21-65)      BDS 1357: 1992 ; Specification for Washers with Fittings for Water Service;

21-66)      BDS 1361 : 1992 ; Faucets

21-67)      BDS 1361:1992 ; Faucets

21-68)      BDS 1507 : 1995 ; Bib taps used in water supply

21-69)      BDS 1508 : 1995 ; Stop taps used in water supply.Specifies the requirements, dimensions construction, materials and test methods of stop taps used in water supply.

21-70)      BDS 1508:1995 ; Stop taps used in water supply.

21-71)      BDS 1509:1995 ; Pillar taps used in water supply

21-72)      BDS 1562:1997 ; Solvent cements for polyvinyl chloride (PVC) plastic pipe and fitting.

21-73)      BDS 1593 : 1998 ; Plastic sanitary squatting pan

21-74)      BDS 1593:1998 ; Plastic sanitary squatting pan

21-75)      BDS 428:1964 ; Specification for Asbestos Cement Pressure Pipe;

21-76)      BDS 429:1964 ; Specification for Asbestos Cement Building and Sanitary Pipes (under revision);

21-77)      BDS 987 : 1981 ; Sand cast brass screw‐down bib taps and stop taps for water services.

21-78)      BDS EN 1112: 2009 ; Sanitary tapware ‐ Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 – General technical specification

21-79)      BDS EN 1113: 2009 ; Sanitary tapware – Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 – General technical specification

21-80)      BDS EN 1254‐2: 2009 ; Copper and copper alloys ‐ Plumbing fittings – Part 2: Fittings with compression ends for use with copper tubes

21-81)      BDS EN 14506: 2009 ; Devices to prevent pollution by backflow of potable water – Automatic diverter – Family H, type C

21-82)      BDS EN 1717: 2009 ; Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow

21-83)      BDS EN 200: 2009 ; Sanitary tapware — Single taps and combination taps for water supply systems of type 1 and type 2 — General technical specification

21-84)      BDS EN 246: 2009 ; Sanitary tapware – General specifications for flow rate regulators

21-85)      BDS EN 248: 2009 ; Sanitary tapware – General specification for electrodeposited coatings of Ni‐Cr

21-86)      BDS EN 681-1: 2008 ; Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber

21-87)      BDS EN 681-2 : 2008 ; Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers

21-88)      BDS ISO /TR 4191: 2008 ; Unplasticized polyvinyl chloride (PVC-U) pipes for water supply-Recommended practice for laying

21-89)      BDS ISO 11413:2010 ; Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting BDS ISO 11414, Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

21-90)      BDS ISO 1167-1 : 2008 ; Thermoplastics pipes fittings and assemblies for the conveyance of fluids – Determination of the resistance to internal pressure- Part 1: General method

21-91)      BDS ISO 1167-2 : 2008 ; Thermoplastics pipes fittings and assemblies for the conveyance of fluids- Determination of the resistance to internal pressure-

21-92)      BDS ISO 12176-2:2010 ; Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion

21-93)      BDS ISO 12176-3:2010 ; Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator’s badge

21-94)      BDS ISO 12176-4:2010 ; Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding

21-95)      BDS ISO 13479:2010 ; Polyolefin pipes for the conveyance of fluids — Determination of

21-96)      BDS ISO 13761:2010 ; Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 °C

21-97)      BDS ISO 13951:2010 ; Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading

21-98)      BDS ISO 13953:2010 ; Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

21-99)      BDS ISO 13954:2010 ; Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

21-100)    BDS ISO 13955:2010 ; Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies

21-101)    BDS ISO 13957:2010 ; Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance

21-102)    BDS ISO 14236:2010 ; Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems

21-103)    BDS ISO 161-1 : 2008 ; Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and Nominal Pressures- Part 1: Metric series

21-104)    BDS ISO 161-2 : 2008 ; Thermoplastics pipes for the conveyance of fluids- Nominal outside diameters and Nominal Pressures- Part 2: Inch – based series

21-105)    BDS ISO 1746 : 2008 ; Rubber or Plastics hoses and tubing-Bending tests

21-106)    BDS ISO 18553:2010 ; Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

21-107)    BDS ISO 18553:2010 ; Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds Amendment 1:2010

21-108)    BDS ISO 2505 : 2008 ; Thermoplastics pipes- Longitudinal reversion – Test method and parameters

21-109)    BDS ISO 2507-2 : 2008 ; Thermoplastics pipes and fittings – Vicat softening temperature- Part 2: Test conditions for Unplasticized poly (Vinyl chloride) (PVC-U) or chlorinated poly (Vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (Vinyl chloride) (PVC-HI) pipes

21-110)     BDS ISO 265-1 : 2008 ; Pipes and fittings of plastics materials- fittings for domestic and industrial waste pipes- Basic dimensions: Metric series- Part 1: Unplasticized Poly (Vinyl chloride) (PVC-U)

21-111)     BDS ISO 3114: 2008 ; Unplasticized polyvinyl chloride (PVC) pipes for potable water supply-Extractability of lead and tin- Test method

21-112)     BDS ISO 3126 : 2008 ; Plastics piping systems-Plastics components- Determination of dimensions

21-113)     BDS ISO 3127: 2008 ; Thermoplastics pipes- Determination of resistance to external blows-Round – the – clock method

21-114)     BDS ISO 3419: 2008 ; Non – alloy and alloy steel butt–welding fittings

21-115)     BDS ISO 3458:2010 ; Assembled joints between fittings and polyethylene (PE)

21-116)     BDS ISO 3459:2010 ; Polyethylene (PE) pressure pipes — Joints assembled with mechanical fittings — Internal under pressure test method and requirement

21-117)     BDS ISO 3501:2010 ; Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of resistance to pull-out

21-118)     BDS ISO 3503:2010 ; Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure when subjected to bending

21-119)     BDS ISO 3633: 2008 ; Plastics piping systems for soil and waste discharge (Low and high temperature ) inside buildings- Specifications

21-120)    BDS ISO 3822-‐1: 2009 ; Acoustics: Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 1: Method of measurement

21-121)    BDS ISO 3822-‐2: 2009 ; Acoustics: Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 2: Mounting and operating conditions for draw‐off taps and mixing valves

21-122)    BDS ISO 3822-‐4: 2009 ; Acoustics: Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 4: Mounting and operating conditions for special appliances

21-123)    BDS ISO 4065: 2008 ; Thermoplastics pipes- Universal wall thickness table

21-124)    BDS ISO 4422-1: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply – Specifications – Part 1: General

21-125)    BDS ISO 4422-2: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply – Specifications – Part 2: Pipes (with or without integral sockets)

21-126)    BDS ISO 4422-3: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride)(PVC-U) for water supply- Specifications – Part 3: Fittings and joints

21-127)    BDS ISO 4422-4: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply- Specifications- Part 4: Valves and ancillary equipment

21-128)    BDS ISO 4422-5: 2008 ; Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC- U) for water supply- Specifications- Part 5: Fitness for purpose of the system

21-129)    BDS ISO 4427-1:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General

21-130)    BDS ISO 4427-1:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General Technical corrigendum 1: 2010

21-131)    BDS ISO 4427-2:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes

21-132)    BDS ISO 4427-3:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings

21-133)    BDS ISO 4427-5:2010 ; Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system

21-134)    BDS ISO 4433-3: 2008 ; Thermoplastics pipes- Resistance to liquid chemicals- Classification-Part 3: Unplasticized poly (vinyl chloride) (PVC-U), high- impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC –C) pipes

21-135)    BDS ISO 4435: 2008 ; Plastic piping systems for non- pressure underground drainage and sewerage- Unplasticized poly (vinyl chloride) (PVC-U)

21-136)    BDS ISO 4439: 2008 ; Unplasticized polyvinyl chloride (PVC) pipes and fittings – Determination and specification of density

21-137)    BDS ISO 5251: 2008 ; Stainless steel butt–welding fittings

21-138)    BDS ISO 6259-1: 2008 ; Thermoplastics pipes- Determination of tensile properties- Part 1: General test method

21-139)    BDS ISO 6259-2: 2008 ; Thermoplastics pipes- Determination of tensile properties- Part 2: Pipes made of unplasticized poly (vinyl chloride) (PVC-U), Chlorinated poly (vinyl chloride) (PVC-C), and high – impact poly (vinyl chloride) (PVC-HI)

21-140)    BDS ISO 6761: 2008 ; Steel tubes – Preparation of ends of tubes and fittings for welding

21-141)    BDS ISO 6964:2010 ; Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification

21-142)    BDS ISO 6992: 2008 ; Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply – Extractability of cadmium and mercury occurring as impurities

21-143)    BDS ISO 9624:2010 ; Thermoplastics pipes for fluids under pressure — Mating dimensions of flange adapters and loose backing flanges

21-144)    BS 1010 ; Specification for Draw-Off Taps and Stopvalves for Water Services;

21-145)    BS 1125: 1987 ; Specification for WC Flushing Cisterns (Including Dual Flash Cisterns and Flush Pipes);

21-146)    BS 1212 3 (Parts) ; Specification for Float Operated Valves (excluding floats);

21-147)    BS 1244 ; Metal Sink for Domestic Purposes;

21-148)    BS 1254:1981 ; Specification for C Seats (Plastics);

21-149)    BS 1329:1974 ; Specification for Metal Hand Rinse Basins;

21-150)    BS 1415 ( 2 parts) ; Mixing Valves (Manullay Operated);

21-151)    BS 1876: 1992(1977) ; Specification for Automatic Flushing Cistern for Urinals

21-152)    BS 1968 ; Specification for Floats for Ball Valves (copper);

21-153)    BS 2456: 1973 ; Specification for Floats for Ball Valves (plastic) for Cold and Hot Water

21-154)    BS 3377:1985 ; Specification for Boilers for Use with Domestic Solid Mineral Fuel Appliances;

21-155)    BS 5163: 1986 ; Specification for Predominantly Key-Operated Cast Iron Wedge Gate Valve for Water Works;

21-156)    BS 5433: 1976 ; Specification for Underground Stop valves for Water Services (copper);

21-157)    BS 843: 1976 ; Specification for Thermal Storage Electric Water Heaters;

21-158)    BS 855:1976 ; Specification for Welded Steel Boilers for Central Heating and Indirect Hot Water Supply.

21-159)    IS 404 (Part-I)-1993 ; Specification for Lead Pipes Part I for other than Chemical Purpose (third Revision);

21-160)    ISO 160: 1980 ; Asbestos-Cement Pressure Pipes and Joints;

21-161)    ISO 2531-1991 ; Ductile Iron Pipes, Fittings and Accessories for Pressure Pipelines;

21-162)    ISO 392:1986 ; Asbestos-Cement Pipe Fittings for Building and Sanitary Purposes;

21-163)    ISO 881:1980 ; Asbestos-Cement Pipes, Joints and Fittings for Sewerage and Drainage;

 

 

 

 

 

 

20. PAINTS AND VARNISHES

건설자재 시험 및 인증 관련 규격목록 20

20. PAINTS AND VARNISHES

20-1)        BDS 1005:1981 ; Specification for Ready Mixed Paint, Brushing, Finishing, Stoving, Enamel, Colour as Required;

20-2)        BDS 1064:1983 ; Specification for Varnish, Stoving;

20-3)        BDS 1065:1983 ; Specification for Varnish, Acid Resisting;

20-4)        BDS 1066:1983 ; Specification for Varnish, Finishing, Interior;

20-5)        BDS 1097:1984 ; Specification for Plastic Emulsion Paint.

20-6)        BDS 1141:1986 ; Specification for Ready Mixed Aluminium Priming Paints for Woodwork;

20-7)        BDS 1151:1986 ; Specification for Pavement Marking Paints.

20-8)        BDS 13:1960 ; Specification for Ready Mixed Paints, Varnish, Lacquers and Related Products (under revision);

20-9)        BDS 14:1960 ; Specification for Black Bituminous Paint, Brushing for General Purposes (under revision);

20-10)      BDS 397:1964 ; Specification for Ready Mixed Paint, Brushing, Red Oxide Zinc Chrome, Priming (under revision);

20-11)      BDS 398:1964 ; Specification for Ready Mixed Paint, Spraying, Red Oxide Zinc Chrome, Priming (under revision);

20-12)      BDS 399:1964 ; Specification for Aluminum Paint, Spraying for General Purposes, in Dual Container (under revision);

20-13)      BDS 400:1964 ; Specification for Aluminium Paint, Brushing, for General Purposes in Dual Container (under revision);

20-14)      BDS 401:1964 ; Specification for Varnish, Finishing, Exterior, Type-I, (Synthetic) (Tentative) (under revision);

20-15)      BDS 401:1964 ; Specification for Varnish, Finishing, Exterior, Type-I, (synthetic) (under revision);

20-16)      BDS 402:1989 ; Specification for Ready Mixed Paint, Brushing, Finishing, Semigloss, for General Purposes (First Revision);

20-17)      BDS 499:1965 ; Specification for Ready Mixed Paints, Brushing, for Road Marking (white, yellow and black) (under revision);

20-18)      BDS 500:1965 ; Specification for Distemper Dry (under revision);

20-19)      BDS 616:1966 ; Specification for Enamel, Brushing, Exterior (i) Undercoating, (ii) Finishing, Colour as Required (under revision);

20-20)      BDS 617:1966 ; Specification for Enamel, Brushing, Interior (i) Undercoating, (ii) Finishing, Colour as Required (under revision);

20-21)      BDS 926:1980 ; Specification for Ready Mixed Paint, Brushing, Petrol Resisting, Air Drying, for Exterior Painting of Containers, Colour as Required;

20-22)      BDS 927:1980 ; Specification for Ready Mixed Paint, Brushing, Petrol Resisting, Air Drying, for Interior Painting of Tanks and Containers, Red Oxide (colour unspecified);

20-23)      BDS 928:1980 ; Specification for Ready Mixed Paint, Brushing, Acid Resisting, for Protection Against Acid Fumes, Colour as Required;

20-24)      BDS 973:1981 ; Specification for Specification and Methods of Test for Linseed Stand Oil for Paints and Varnishes;

20-25)      BDS 974:1981 ; Specification and Methods of Test for Raw Tung Oils for Paints and Varnishes;

20-26)      IS 101 ; Methods of sampling and test for paints, varnishes and related products:

20-27)      IS 104:1979 ; Specification for ready mixed paint, brushing, zinc chrome, priming (second revision)

20-28)      IS 109:1968 ; Specification for ready mixed paint, brushing, priming, plaster to Indian Standard colours No. 361 and 631 (first revision)

20-29)      IS 11883:1986 ; Specification for ready mixed paint, brushing, red oxide, priming for metals

20-30)      IS 123:1962 ; Specification for ready mixed paint, brushing, finishing, semi-gloss, for general purposes, to Indian Standard colours No. 445, 446, 448, 449, 451 and 473; and red oxide (colour unspecified) (revised)

20-31)      IS 13183:1991 ; Specification for aluminium paints, heat resistant

20-32)      IS 13213:1991 ; Specification for polyurethane full gloss enamel (two pack)

20-33)      IS 133:1993 ; Specification for enamel, interior (a) undercoating, (b) finishing (third revision)

20-34)      IS 13607:1992 ; Specification for ready mixed paint, finishing, general purposes, synthetic

20-35)      IS 137:1965 ; Specification for ready mixed paint, brushing, matt or egg-shell flat, finishing, interior, to Indian Standard colour, as required (revised)

20-36)      IS 13871:1993 ; Specification for powder coatings

20-37)      IS 14314:1995 ; Specification for thinner general purposes for synthetic paints and varnishes

20-38)      IS 158:1981 ; Specification for ready mixed paint, brushing, bituminous, black, lead-free, acid, alkali, and heat resisting (third revision)

20-39)      IS 168:1993 ; Specification for ready mixed paint, air-drying semi-glossy/matt, for general purposes (third revision)

20-40)      IS 2074:1992 ; Specification for ready mixed paint, air drying red oxide-zinc chrome, priming (second revision)

20-41)      IS 2075:2000 ; Specification for ready mixed paint, stoving, red oxide-zinc chrome, priming (second revision)

20-42)      IS 2339:1963 ; Specification for aluminium paint for general purposes, in dual container

20-43)      IS 2932:2003 ; Specification for enamel, synthetic, exterior, (a) undercoating, (b) finishing (third revision)

20-44)      IS 2933:1975 ; Specification for enamel, exterior, (a) undercoating, (b) finishing (first revision)

20-45)      IS 324:1959 ; Specification for ordinary denatured spirit (revised)

20-46)      IS 324-1959 ; Specification for Ordinary Denatured Spirit (revised);

20-47)      IS 337:1975 ; Specification for varnish, finishing, interior (first revision)

20-48)      IS 341:1973 ; Specification for black Japan, Types A, B and C first revision)

20-49)      IS 347-1975 ; Specification for Varnish, Shellac for general purposes (First Revision);

20-50)      IS 348-1968 ; Specification for French Polish (First Revision);

20-51)      IS 3536:1999 ; Specification for ready mixed ‘paint, brushing, wood primer

20-52)      IS 3537:1966 ; Specification for ready mixed paint, finishing, interior for general purposes, to Indian Standard colours No. 101, 216, 217, 219, 275:”281, 352, 353, 358 to 361, 363,364,388,410,442, 444,628, 631,632,634,693,697, white andblack

20-53)      IS 3539:1966 ; Specification for ready mixed paint, undercoating, for use under oil finishes, to Indian Standard colours, as required

20-54)      IS 3585:1966 ; Specification for ready mixed paint, aluminium, brushing, priming, water resistant, for wood work

20-55)      IS 3678:1966 ; Specification for ready mixed paint, thick white, for lettering

20-56)      IS 427:1965 ; Specification for distemper, dry, colour as required (revised)

20-57)      IS 428:2000 ; Specification for distemper, washable (second revision)

20-58)      IS 524:1983 ; Specification for varnish, finishing, exterior, synthetic (second revision)

20-59)      IS 525:196 ; Specification for varnish, finishing, exterior and general purposes (first revision)

20-60)      IS 533:1998 ; Specification for gum spirit of turpentine (oil of turpentine) (second revision)

20-61)      IS 5410:1992 ; Specification for cement paint, colour as required (first revision)

20-62)      IS 5411 ; Specification for plastic emulsion paint:

20-63)      IS 642:1963 ; Specification for varnish medium for aluminium paint (revised)

20-64)      IS 82:1992 ; Methods of sampling and test for thinners and solvents for paints (first revision)

20-65)      IS 8662:1993 ; Specification for enamel, synthetic, exterior, (a) undercoating, (b) finishing, for railway coaches (first revision)

20-66)      IS 9862:1981 ; Specification for ready mixed paint, brushing, bituminous black lead free, acid, alkali, water and chlorine resisting

19. ROOF COVERINGS

건설자재 시험 및 인증 관련 규격목록 19

19. ROOF COVERINGS

19-1)        ASTM A755 / A755M – 03(2008) ; Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Pre-painted by the Coil-Coating Process for Exterior Exposed Building Products

19-2)        ASTM B101 – 07 ; Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

19-3)        ASTM C1029 – 09 ; Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

19-4)        ASTM C222 – 97(2008) ; Standard Specification for Asbestos-Cement Roofing Shingles

19-5)        ASTM C406 – 06e1 ; Standard Specification for Roofing Slate

19-6)        ASTM C836 / C836M – 10 ; Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

19-7)        ASTM D1227 – 95(2007) ; Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing

19-8)        ASTM D1863 – 05 ; Standard Specification for Mineral Aggregate Used on Built-Up Roofs

19-9)        ASTM D2178 – 04 ; Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

19-10)      ASTM D225 – 07 ; Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules

19-11)      ASTM D226 / D226M – 09 ; Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

19-12)      ASTM D227 – 03 ; Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

19-13)      ASTM D2626 – 04 ; Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

19-14)      ASTM D2898 – 10 ; Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

19-15)      ASTM D312 – 00(2006) ; Standard Specification for Asphalt Used in Roofing

19-16)      ASTM D3161 – 09 ; Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method)

19-17)      ASTM D3747 – 79(2007) ; Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation

19-18)      ASTM D3909 – 97b(2004)e1 ; Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules

19-19)      ASTM D4272 – 09 ; Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop

19-20)      ASTM D4434 / D4434M – 09 ; Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

19-21)      ASTM D450 – 07 ; Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

19-22)      ASTM D4601 – 04 ; Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing

19-23)      ASTM D4637 – 08 ; Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

19-24)      ASTM D4897 / D4897M – 01(2009) ; Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

19-25)      ASTM D6380 – 03(2009) ; Standard Specification for Asphalt Roll Roofing (Organic Felt)

19-26)      ASTM D6380 – 03(2009) ; Standard Specification for Asphalt Roll Roofing (Organic Felt)

19-27)      ASTM E108 – 10a ; Standard Test Methods for Fire Tests of Roof Coverings

19-28)      ASTM G154 – 06 ; Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials

19-29)      ASTM G155 – 05a ; Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

19-30)      ASTM G90 – 05 ; Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight

19-31)      BDS 1046:1983 ; Specification for Asbestos Cement Products – Corrugated Sheets and Fittings for Roofing and Cladding;

19-32)      BDS 1122:1985 ; Specification for Hot-dip Galvanized Steel and Coil.

19-33)      BDS 430:1964 ; Specification for Asbestos Cement Corrugated Sheets for Roofing and Cladding

19-34)      BDS 431:1964 ; Specification for Asymmetrical Section Corrugated Sheets in Asbestos Cement for Roofing and Cladding

19-35)      BDS 579:1966 ; Specification for Asbestos Cement Flat Sheets (under revision);

19-36)      BDS 868:1978 ; Code of Practice for Galvanized Corrugated Sheet Roof and Wall Coverings;

19-37)      BDS EN 1024: 2008 ; Clay roofing tiles for discontinuous laying — Determination of geometric characteristics

19-38)      BDS EN 1304: 2008 ; Clay roofing tiles and fittings — Product definitions and specifications

19-39)      BDS EN 490: 2008 ; Concrete roofing tiles and fittings for roof covering and all cladding — Product specifications

19-40)      BDS EN 49l: 2008 ; Concrete roofing tiles and fittings for roof covering and wall cladding — Test methods

19-41)      BDS EN 538: 2008 ; Clay roofing tiles for discontinuous laying — Flexural strength test

19-42)      BDS EN 539-l: 2008 ; Clay roofing tiles for discontinuous laying Determination of physical characteristics — Part 1: Impermeability test

18. BUILDERS HARDWARE 건설자재 시험 및 인증 관련 규격목록 18

건설자재 시험 및 인증 관련 규격목록 18

18. BUILDERS HARDWARE

18-1)        BDS 113:1986 ; Specification for Latches and Locks for Doors in Buildings;

18-2)        IS 10019-1981 ; Specification for Steel Window Stays and Fasteners;

18-3)        IS 10090-1982 ; Specification for Numericals;

18-4)        IS 1019-1974 ; Specification for Rim Latches (Second Revision);

18-5)        IS 10342-1982 ; Specification for Curtain Rail System

18-6)        IS 12817:1997 ; Specification for stainless steel butt hinges (first revision)

18-7)        IS 12867:1989 ; Specification for PVC hand rails covers

18-8)        IS 1341-1992 ; Specification for Steel Butt Hinges (Sixth Revision);

18-9)        IS 14912:2001 ; Specification for door closers concealed type (hydraulically regulated)

18-10)      IS 1823-1980 ; Specification for Floor Door Stoppers (Third Revision);

18-11)      IS 1837-1966 ; Specification for Fanlight Pivots (First Revision);

18-12)      IS 204-1991/1992 ; Specification for Tower Bolts;

18-13)      IS 205-1992 ; Specification for Nonferrous Metal Butt Hinges (fourth Revision);

18-14)      IS 206-1992 ; Specification for Tee and Strap Hinges (Fourth Revision);

18-15)      IS 208-1996 ; Specification for Door Handles (Fifth Revision);

18-16)      IS 2209-1976 ; Specification for Mortice Locks (vertical type) (Third Revision);

18-17)      IS 2681-1993 ; Specification for Nonferrous Metal Sliding Door Bolts for Use with Padlocks (Third Revision);

18-18)      IS 281-1991 ; Specification for Mild Steel Sliding Door Bolts for Use with Padlock (Third Revision);

18-19)      IS 3564-1995 ; Specification for Door Closers (hydraulically regulated) (Second Revision);

18-20)      IS 362-1991 ; Specification for Parliament Hinges (Fifth Revision);

18-21)      IS 363-1993 ; Specification for Hasps and Staples (Fourth Revision);

18-22)      IS 364-1993 ; Specification for Fanlight Catch (Third Revision);

18-23)      IS 3818-1992 ; Specification for Continuous (piano) Hinges (Third Revision);

18-24)      IS 3828-1966 ; Specification for Ventilator Chains;

18-25)      IS 3843-1995 ; Specification for Steel Backflap Hinges; (First Revision)

18-26)      IS 3847-1992 ; Specification for Mortice Night Latches; (First Revision)

18-27)      IS 452-1973 ; Specification for Door Springs, Rat-tail Type (Second Revision);

18-28)      IS 453-1993 ; Specification for Double Acting Spring Hinges (Third Revision);

18-29)      IS 4621-1975 ; Specification for Indicating Bolts for use in Public Baths and Lavatories (First Revision);

18-30)      IS 4948-2002 ; Specification for Welded Steel Wire Fabric for General Use (Second Revision);

18-31)      IS 4992-1975 ; Specification for Door Handles for Mortice Locks (vertical type) (First Revision);

18-32)      IS 5187-1972 ; Specification for Flush Bolts (First Revision);

18-33)      IS 5899-1970 ; Specification for Bathroom Latches;

18-34)      IS 5930-1970 ; Specification for Mortice Latch (vertical type);

18-35)      IS 6315-1971 ; Specification for Floor Springs (hydraulically regulated) for Heavy Doors;

18-36)      IS 6318-1971 ; Specification for Plastic Window Stays and Fasteners;

18-37)      IS 6343-1982 ; Specification for Door Closers (pneumatically regulated) for Light Doors Weighing up to 40 kg (First Revision);

18-38)      IS 6602-1972 ; Specification for Ventilator Poles;

18-39)      IS 6607-1972 ; Specification for Rebated Mortice Locks (vertical type);

18-40)      IS 7196-1974 ; Specification for Hold Fast;

18-41)      IS 7197-1974 ; Specification for Double Action Floor Springs (without oil check) for Heavy Doors;

18-42)      IS 729-1979 ; Specification for Drawer Locks, Cupboard Locks and Box Locks (Third Revision);

18-43)      IS 7534-1985 ; Specification for sliding locking bolts for use with padlocks (first revision);

18-44)      IS 7540-1974 ; Specification for Mortice Dead Locks;

18-45)      IS 8756-1978 ; Specification for Ball Catches for use in Wooden Almirah;

18-46)      IS 8760-1978 ; Specification for Mortice Sliding Door Locks, with Lever Mechanism;

18-47)      IS 9106-1979 ; Specification for Rising Butt Hinges;

18-48)      IS 9131-1979 ; Specification for Rim Locks;

18-49)      IS 9460-1980 ; Specification Flush Drop Handle for Drawer;

18-50)      IS 9899-1981 ; Specification for Hat, Coat and Wardrobe Hooks;