STD-ASTM EXXXX Conti 3

ASTM A , ASTM B , ASTM C , ASTM D , ASTM E | 1 || 2 || 3 | , ASTM F , ASTM G

ASTM E2691 : EN-Standard Practice for Job Productivity Measurement
ASTM E2692 : EN-Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products
ASTM E2693 : EN-Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment
ASTM E2694 : EN-Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM E2695 : EN-Standard Guide for Interpretation of Mass Spectral Data Acquired with Time-of-Flight Secondary Ion Mass Spectroscopy
ASTM E2696 : EN-Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
ASTM E2698 : EN-Standard Practice for Radiological Examination Using Digital Detector Arrays
ASTM E2699 : EN-Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods
ASTM E27 : EN-STANDARD METHOD OF SPECTROGRAPHIC ANALYSIS OF ZINC AND ZINC ALLOYS BY THE SOLUTION-RESIDUE TECHNIQUE
ASTM E270 : EN-STANDARD TERMINOLOGY RELATING TO LIQUID PENETRANT EXAMINATION
ASTM E270 REV A : EN-STANDARD TERMINOLOGY RELATING TO LIQUID PENETRANT EXAMINATION
ASTM E2701 : EN-Standard Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing
ASTM E2707 : EN-Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
ASTM E2708 : EN-Standard Terminology for Personnel Credentialing
ASTM E2709 : EN-Standard Practice for Demonstrating Capability to Comply with a Lot Acceptance Procedure
ASTM E271 : EN-Standard Test Methods for Analysis of Aqueous Hydrofluoric Acid
ASTM E2712 : EN-Standard Test Methods for Forming Superplastic Metallic Sheet
ASTM E2714 : EN-Standard Test Method for Creep-Fatigue Testing
ASTM E2715 : EN-Standard Practice for Moveable Property Storage
ASTM E2716 : EN-Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM E2718 : EN-Standard Guide for Financial Disclosures Attributed to Climate Change
ASTM E2719 : EN-Standard Guide for Fluorescence-Instrument Calibration and Qualification
ASTM E272 : EN-Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
ASTM E2722 : EN-Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media
ASTM E2729 : EN-Standard Practice for Rectification of Spectrophotometric Bandpass Differences
ASTM E273 : EN-Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
ASTM E2731 : EN-Standard Specification for Materials to Mitigate the Spread of Radioactive Contamination after a Radiological Dispersion Event
ASTM E2734/E2734M : EN-Standard Specification for Dimensions of Knife-Edge Flanges
ASTM E2736 : EN-Standard Guide for Digital Detector Array Radiology
ASTM E2737 : EN-Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability
ASTM E2738 : EN-Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods
ASTM E274 : EN-Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire-AASHTO T242
ASTM E2740 : EN-Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
ASTM E2748 : EN-Standard Guide for Fire-Resistance Experiments
ASTM E2749 : EN-Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E275 : EN-Standard Practice for Describing and Measuring Performance of Ultraviolet Visible and Near-Infrared Spectrophotometers
ASTM E2752 : EN-Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products
ASTM E2753 : EN-Standard Specification for Eretmocerus eremicus Rose and Zolnerowich (Hymenoptera: Aphelinidae)
ASTM E2754 : EN-Standard Specification for Delphastus catalinae (Horn) (Coleoptera:Coccinellidae)
ASTM E2755 : EN-Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hand Sanitizer Formulations Using Hands of Adults
ASTM E2758 : EN-Standard Guide for Selection and Use of Wideband Low Temperature Infrared Thermometers
ASTM E2759 : EN-Standard Practice for Highway Traffic Monitoring Truth-in-Data
ASTM E276 : EN-Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM E2760 : EN-Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM E2767 : EN-Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods
ASTM E277 : EN-STANDARD TEST METHOD FOR TOTAL IRON IN IRON ORES BY STANNOUS CHLORIDE REDUCTION AND DICHROMATE TITRATION
ASTM E278 : EN-STANDARD TEST METHODS FOR PHOSPHORUS IN IRON ORES (R 1981) (E1-1985)
ASTM E279 : EN-STANDARD TEST METHOD FOR IRON ORE PELLETS AND SINGER (TUMBLER TEST) (R 1988) (E1-1988)
ASTM E28 : EN-Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
ASTM E280 : EN-Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel Castings
ASTM E283 : EN-STANDARD TEST METHOD FOR RATE OF AIR LEAKAGE THROUGH EXTERIOR WINDOWS CURTAIN WALLS AND DOORS
ASTM E284 : EN-Standard Terminology of Appearance
ASTM E284 REV A : EN-STANDARD TERMINOLOGY OF APPEARANCE
ASTM E284 REV B : EN-Standard Terminology of Appearance
ASTM E284 REV C : EN-Standard Terminology of Appearance
ASTM E285 : EN-Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
ASTM E286 : EN-Surface Flammability of Building Materials Using an 8-ft (2.44-m) Tunnel Furnace Test Method for
ASTM E287 : EN-Standard Specification for Laboratory Glass Graduated Burets
ASTM E288 : EN-STANDARD SPECIFICATION FOR VOLUMETRIC FLASKS (R 1988)
ASTM E289 : EN-Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM E289 REV A : EN-STANDARD TEST METHOD FOR LINEAR THERMAL EXPANSION OF RIGID SOLIDS WITH INTERFEROMETRY
ASTM E289 REV B : EN-STANDARD TEST METHOD FOR LINEAR THERMAL EXPANSION OF RIGID SOLIDS WITH INTERFEROMETRY
ASTM E29 : EN-STANDARD RECOMMENDED PRACTICE FOR INDICATING WHICH PLACES OF FIGURES ARE TO BE CONSIDERED SIGNIFICANT IN SPECIFIED LIMITING VALUES (R 1980) (E1-1980)
ASTM E29 REV A : EN-Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E29 REV B : EN-Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E290 : EN-Standard Test Methods for Bend Testing of Material for Ductility
ASTM E290 REV A : EN-Standard Test Methods for Bend Testing of Material for Ductility
ASTM E291 : EN-Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
ASTM E292 : EN-Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM E293 : EN-Standard Test Method for Spectrographic Determination of Acid-Soluble Aluminum in Low-Alloy Steel by the Solution Technique
ASTM E294 : EN-Standard Test Method for Effective Pumping Speed of Vacuum Chamber Systems
ASTM E295 : EN-Standard Test Method for Measured Speed of Oil Diffusion Pumps
ASTM E296 : EN-Standard Practice for Ionization Gage Application to Space Simulators
ASTM E298 : EN-Standard Test Methods for Assay of Organic Peroxides
ASTM E299 : EN-Standard Test Method for Trace Amounts of Peroxides in Organic Solvents
ASTM E3 : EN-Standard Practice for Preparation of Metallographic Specimens
ASTM E30 : EN-Standard Test Methods for Chemical Analysis of Steel Cast Iron Open-Hearth Iron and Wrought Iron
ASTM E300 : EN-Standard Practice for Sampling Industrial Chemicals-Discontinued 2001; Reinstated
ASTM E301 : EN-STANDARD TEST METHOD FOR TOTAL ACIDITY OF ORGANIC ACIDS
ASTM E302 : EN-Standard Test Methods for Monobasic Organic Acids
ASTM E303 : EN-Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM E304 : EN-USE AND EVALUATION OF SPARK SOURCE MASS SPECTROMETERS FOR ANALYSIS OF SOLIDS PRACTICE FOR
ASTM E305 : EN-STANDARD PRACTICE FOR ESTABLISHING AND CONTROLLING SPECTROCHEMICAL ANALYTICAL CURVES
ASTM E306 : EN-STANDARD METHOD FOR ABSOLUTE CALIBRATION OF REFLECTANCE STANDARDS
ASTM E307 : EN-Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM E308 : EN-STANDARD TEST METHOD FOR COMPUTING THE COLORS OF OBJECTS BY USING THE CIE SYSTEM
ASTM E308 REV A : EN-STANDARD PRACTICE FOR COMPUTING THE COLORS OF OBJECTS BY USING THE CIE SYSTEM
ASTM E309 : EN-Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
ASTM E309 REV A : EN-STANDARD PRACTICE FOR EDDY-CURRENT EXAMINATION OF STEEL TUBULAR PRODUCTS USING MAGNETIC SATURATION
ASTM E31 : EN-Standard Methods for Chemical Analysis of Ferroalloys
ASTM E310 : EN-Standard Reference Radiographs for Tin Bronze Castings
ASTM E312 : EN-STANDARD PRACTICE FOR DESCRIPTION AND SELECTION OF CONDITIONS FOR PHOTOGRAPHING SPECIMENS
ASTM E313 : EN-STANDARD TEST METHOD FOR INDEXES OF WHITENESS AND YELLOWNESS OF NEAR- WHITE OPAQUE MATERIALS (R 1993) (E1-1993)
ASTM E314 : EN-Standard Test Methods for Manganese in Iron Ores
ASTM E315 : EN-Standard Test Methods for Chemical Analysis of Molybdenum
ASTM E316 : EN-Standard Test Method for Iron in Manganese Ore
ASTM E316 REV A : EN-Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titration
ASTM E317 : EN-Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Systems Without the Use of Electronic Measurement Instruments
ASTM E317 REV A : EN-Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
ASTM E318 : EN-Standard Test Method for Uranium in Aqueous Solutions by Colorimetry
ASTM E319 : EN-Standard Practice for the Evaluation of Single-Pan Mechanical Balances
ASTM E32 : EN-Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM E320 : EN-STANDARD TEST METHODS FOR CESIUM-137 IN NUCLEAR FUEL SOLUTIONS BY RADIOCHEMICAL ANALYSIS
ASTM E321 : EN-Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)
ASTM E322 : EN-Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
ASTM E323 : EN-Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E324 : EN-Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM E325 : EN-Standard Test Method for Silicon in Organic Compounds by Sodium Peroxide Bomb Ignition
ASTM E326 : EN-STANDARD TEST METHOD FOR HYDROXYL GROUPS BY PHTHALIC ANHYDRIDE ESTERIFICATION
ASTM E327 : EN-Standard Test Method for Optical Emission Spectrometric Analysis of Stainless Type 18-8 Steels by the Point-To-Plane Technique
ASTM E328 : EN-Standard Test Methods for Stress Relaxation for Materials and Structures
ASTM E329 : EN-Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction
ASTM E329 REV A : EN-Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction
ASTM E329 REV B : EN-Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction
ASTM E329 REV C : EN-Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction
ASTM E330 : EN-Standard Test Method for Structural Performance of Exterior Windows Doors Skylights and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E331 : EN-Standard Test Method for Water Penetration of Exterior Windows Skylights Doors and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E334 : EN-STANDARD PRACTICES FOR GENERAL TECHNIQUES OF INFRARED MICROANALYSIS
ASTM E335 : EN-STANDARD TEST METHOD FOR HYDROXYL GROUPS BY PYROMELLITIC DIANHYDRIDE ESTERIFICATION
ASTM E336 : EN-Standard Test Method for Measurement of Airborne Sound Insulation in Buildings
ASTM E337 : EN-Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E338 : EN-Standard Test Method of Sharp-Notch Tension Testing of High-Strength Sheet Materials
ASTM E339 : EN-STANDARD TEST METHOD FOR DISCRIMINATION OF DIFFERENCES IN THE PRODUCTION OF ALCOHOLIC BEVERAGES BY THE DUO- TRIO METHOD
ASTM E34 : EN-Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
ASTM E340 : EN-Standard Test Method for Macroetching Metals and Alloys
ASTM E341 : EN-Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
ASTM E342 : EN-Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry
ASTM E343 : EN-STANDARD TEST METHOD FOR MEASURING REACTON RATES BY ANALYSIS OF MOLYBDENUM-99 RADIOACTIVITY FROM FISSION DOSIMETERS
ASTM E344 : EN-Terminology Relating to Thermometry and Hydrometry
ASTM E344 REV A : EN-Terminology Relating to Thermometry and Hydrometry
ASTM E345 : EN-Standard Test Methods of Tension Testing of Metallic Foil
ASTM E346 : EN-STANDARD TEST METHODS FOR ANALYSIS OF METHANOL
ASTM E347 : EN-Standard Test Method for Ash in Polybasic Acids
ASTM E348 : EN-Standard Practice for Man-Rated Space Facilities
ASTM E349 : EN-Standard Terminology Relating to Space Simulation
ASTM E35 : EN-Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys
ASTM E350 : EN-Standard Test Methods for Chemical Analysis of Carbon Steel Low-Alloy Steel Silicon Electrical Steel Ingot Iron and Wrought Iron
ASTM E350 REV A : EN-STANDARD METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL LOW-ALLOY STEEL SILICON ELECTRICAL STEEL INGOT IRON AND WROUGHT IRON
ASTM E350 REV B : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL LOW-ALLOY STEEL SILICON ELECTRICAL STEEL INGOT IRON AND WROUGHT IRON
ASTM E350 REV C : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL LOW-ALLOY STEEL SILICON ELECTRICAL STEEL INGOT IRON AND WROUGHT IRON
ASTM E351 : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF CAST IRON – ALL TYPES
ASTM E351 REV A : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF CAST IRON – ALL TYPES
ASTM E352 : EN-Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Mediumand High-Alloy Steels
ASTM E352 REV A : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF TOOL STEELS AND OTHER SIMILAR MEDIUM- AND HIGH-ALLOY STEELS
ASTM E353 : EN-Standard Test Methods for Chemical Analysis of Stainless Heat-Resisting Maraging and Other Similar Chromium-Nickel-Iron Alloys
ASTM E353 REV A : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF STAINLESS HEAT- RESISTING MARAGING AND OTHER SIMILAR CHROMIUM- NICKEL-IRON ALLOYS
ASTM E354 : EN-Standard Test Methods for Chemical Analysis of High-Temperature Electrical Magnetic and Other Similar Iron Nickel and Cobalt Alloys
ASTM E354 REV A : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF HIGH-TEMPERATURE ELECTRICAL MAGNETIC AND OTHER SIMILAR IRON NICKEL AND COBALT ALLOYS
ASTM E355 : EN-Standard Practice for Gas Chromatography Terms and Relationships
ASTM E356 : EN-Standard Practices for Describing and Specifying the Spectrograph
ASTM E357 : EN-STANDARD TEST METHOD FOR PHOSPHORUS IN ORGANIC COMPOUNDS BY SODIUM PEROXIDE BOMB IGNITION
ASTM E358 : EN-Standard Test Methods for Analysis of Phosphoric Acid
ASTM E359 : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF SODA ASH (SODIUM CARBONATE)
ASTM E360 : EN-Standard Test Methods for Chemical Analysis of Silicon and Ferrosilicon
ASTM E361 : EN-Standard Test Methods for the Determination of Arsenic and Lead Ferromanganese
ASTM E362 : EN-Standard Test Methods for the Determination of Arsenic and Lead in Silicomanganese and Ferrosilicon Manganese
ASTM E363 : EN-Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium
ASTM E364 : EN-Standard Test Methods for Chemical Analysis of Ferrochrome-Silicon
ASTM E365 : EN-Standard Test Methods for Chemical Analysis of Ferrovanadium and Vanadium Alloying Additives
ASTM E367 : EN-Standard Test Methods for Chemical Analysis of Ferroniobium
ASTM E368 : EN-Chemical Analysis of Ferromolybdenum Methods for
ASTM E37 : EN-Standard Test Methods for Chemical Analysis of Pig Lead
ASTM E371 : EN-Standard Test Methods for Chemical Analysis of Ferroboron
ASTM E372 : EN-Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon
ASTM E375 : EN-STANDARD DEFINITIONS OF TERMS RELATING TO RESINOGRAPHY
ASTM E376 : EN-Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods
ASTM E377 : EN-Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM E378 : EN-Standard Test Method for Spectrographic Analysis of Silver by the Powder Technique
ASTM E379 : EN-STANDARD SPECIFICATION FOR APPARATUS FOR DIRECT MICRODETERMINATION OF OXYGEN IN ORGANIC COMPOUNDS
ASTM E38 : EN-STANDARD METHODS FOR CHEMICAL ANALYSIS OF NICKEL-CHROMIUM AND NICKEL-CHROMIUM-IRON ALLOYS
ASTM E380 : EN-Standard Practice for Use of the International System of Units (SI) (the Modernized Metric System)-AASHTO R1; Revised and Redesignated as ASTM SI 10
ASTM E380 REV A : EN-STANDARD PRACTICE FOR USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI) (THE MODERNIZED METRIC SYSTEM)
ASTM E381 : EN-Standard Method of Macroetch Testing Steel Bars Billets Blooms and Forgings
ASTM E382 : EN-Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
ASTM E383 : EN-STANDARD METHOD FOR X-RAY EMISSION SPECTROMETRIC DETERMINATION OF TUNGSTEN IN NICKEL- TUNGSTEN ALLOYS
ASTM E384 : EN-Standard Test Method for Microindentation Hardness of Materials
ASTM E384 REV A : EN-Standard Test Method for Microindentation Hardness of Materials
ASTM E385 : EN-Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM E386 : EN-Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy
ASTM E387 : EN-Standard Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method (E1-1995)
ASTM E388 : EN-Standard Test Method for Wavelength Accuracy of Spectral Bandwidth of Fluorescence Spectrometers
ASTM E389 : EN-Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM E39 : EN-Standard Methods for Chemical Analysis of Nickel
ASTM E390 : EN-STANDARD REFERENCE RADIOGRAPHS FOR STEEL FUSION WELDS
ASTM E390 REV A : EN-STANDARD REFERENCE RADIOGRAPHS FOR STEEL FUSION WELDS
ASTM E391 : EN-STANDARD PRACTICE FOR PRESENTATION OF PHASE DIAGRAMS
ASTM E393 : EN-Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 from Fission Dosimeters
ASTM E394 : EN-Standard Test Method for Iron in Trace Quantities Using the 110-Phenanthroline Method
ASTM E395 : EN-STANDARD TEST METHOD FOR TOTAL SULFUR IN IRON ORES AND RELATED MATERIALS BY COMBUSTION-IODATE TITRATION
ASTM E395 REV A : EN-Standard Test Method for Total Sulfur in Iron Ores and Related Materials by Combustion-Iodate Titration
ASTM E396 : EN-Standard Test Methods for Chemical Analysis of Cadmium
ASTM E396 REV A : EN-Standard Test Methods for Chemical Analysis of Cadmium
ASTM E398 : EN-Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM E399 : EN-Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials
ASTM E4 : EN-STANDARD PRACTICES FOR LOAD VERIFICATION OF TESTING MACHINES (AASHTO NO. T67)
ASTM E4 REV A : EN-STANDARD PRACTICES FOR LOAD VERIFICATION OF TESTING MACHINES (AASHTO NO. T 67)
ASTM E40 : EN-Standard Test Methods for Chemical Analysis of Slab Zinc (Spelter)
ASTM E400 : EN-STANDARD TEST METHOD FOR SPECTROGRAPHIC ANALYSIS OF ORES MINERALS AND ROCKS BY THE FIRE ASSAY PRECONCENTRATION TECHNIQUE
ASTM E400 REV A : EN-Standard Test Method for Analysis of Ores Minerals and Rocks by the Fire Assay Preconcentration Optical Emission Spectroscopy
ASTM E401 : EN-Standard Practice for Bonding Thin Spectrochemical Samples and Standards to a Greater Mass of Material
ASTM E402 : EN-Standard Test Method for Spectrographic Analysis of Uranium Oxide (U3O8) by Gallium Oxide-Carrier Technique
ASTM E403 : EN-STANDARD TEST METHOD FOR OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF CARBON AND LOW-ALLOY STEEL BY THE POINT-TO-PLANE TECHNIQUE
ASTM E404 : EN-Standard Test Method for Spectrographic Determination of Boron in Carbon and Low-Alloy Steel by the Point-to-Plane Technique
ASTM E405 : EN-Standard Test Methods for Wear Testing Rotary Operators for Windows
ASTM E406 : EN-Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis
ASTM E407 : EN-STANDARD TEST METHODS FOR MICROETCHING METALS AND ALLOYS (R 1989)
ASTM E408 : EN-Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E409 : EN-Standard Practice for Description and Performance of the Microphotometer
ASTM E41 : EN-Standard Terminology Relating to Conditioning
ASTM E410 : EN-Standard Test Method for Moisture and Residue in Liquid Chlorine
ASTM E411 : EN-Standard Test Method for Trace Quantities of Carbonyl Compounds with 24-Dinitrophenylhydrazine
ASTM E412 : EN-STANDARD TEST METHOD FOR ASSAY OF LIQUID CHLORINE (ZINC AMALGAM METHOD)
ASTM E413 : EN-STANDARD CLASSIFICATION FOR DETERMINATION OF SOUND TRANSMISSION CLASS (R 1980) (E1-1985)
ASTM E414 : EN-STANDARD TEST METHOD FOR SPECTROGRAPHIC ANALYSIS OF COPPER BY THE BRIQUET TECHNIQUE
ASTM E415 : EN-STANDARD TEST METHOD FOR OPTICAL EMISSION VACUUM SPECTROMETRIC ANALYSIS OF CARBON AND LOW-ALLOY STEEL
ASTM E415 REV A : EN-Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
ASTM E416 : EN-Standard Practice for Planning and Safe Operation of a Spectrochemical Laboratory
ASTM E421 : EN-Standard Test Method for Spectrographic Determination of Silicon and Aluminum in High-Purity Iron
ASTM E422 : EN-Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM E423 : EN-Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM E424 : EN-Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
ASTM E425 : EN-STANDARD TERMINOLOGY RELATING TO LEAK TESTING-(Discontinued 1991; No Replacement)
ASTM E425 REV A : EN-STANDARD TERMINOLOGY RELATING TO LEAK TESTING
ASTM E426 : EN-Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products Austenitic Stainless Steel and Similar Alloys
ASTM E427 : EN-Standard Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode)
ASTM E428 : EN-Standard Practice for Fabrication and Control of Steel Reference Blocks Used in Ultrasonic Inspection
ASTM E428 REV A : EN-Standard Practice for Fabrication and Control of Metal Other than Aluminum Reference Blocks Used in Ultrasonic Examination
ASTM E429 : EN-Standard Test Method for Measurement and Calculation of Reflecting Characteristics of Metallic Surfaces Using Integrating Sphere Instruments
ASTM E430 : EN-Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Goniophotometry
ASTM E431 : EN-Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
ASTM E432 : EN-Standard Guide for Selection of a Leak Testing Method
ASTM E433 : EN-Standard Reference Photographs for Liquid Penetrant Inspection
ASTM E434 : EN-Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM E435 : EN-Standard Test Method for Acetic Anhydride Content (Assay) of Acetic Anhydride
ASTM E436 : EN-Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM E437 : EN-Standard Specification for Industrial Wire Cloth and Screens (Square Opening Series)
ASTM E438 : EN-Standard Specification for Glasses in Laboratory Apparatus
ASTM E439 : EN-Standard Test Methods for Chemical Analysis of Beryllium
ASTM E439 REV A : EN-Standard Test Methods for Chemical Analysis of Beryllium
ASTM E44 : EN-STANDARD DEFINITIONS OF TERMS RELATING TO HEAT TREATMENT OF METALS
ASTM E441 : EN-Standard Test Method for Vinyl Unsaturation in Organic Compounds with Mercuric Acetate
ASTM E442 : EN-Standard Test Method for Chlorine Bromine or Iodine in Organic Compounds by Oxygen Flask Combustion
ASTM E443 : EN-Standard Test Method for Sulfur in Organic Compounds by Oxygen Flask Combustion
ASTM E444 : EN-Standard Guide for Scope of Work of Forensic Document Examiners
ASTM E445 : EN-STANDARD TEST METHOD FOR STOPPING DISTANCE ON PAVED SURFACES USING A PASSENGER VEHICLE EQUIPPED WITH FULL-SCALE TIRES
ASTM E445/E445M : EN-Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped with Full-Scale Tires
ASTM E446 : EN-Standard Reference Radiographs for Steel Castings up to 2 in. (51 mm) in Thickness
ASTM E447 : EN-STANDARD TEST METHODS FOR COMPRESSIVE STRENGTH OF MASONRY PRISMS
ASTM E447 REV A : EN-STANDARD TEST METHODS FOR COMPRESSIVE STRENGTH OF MASONRY PRISMS
ASTM E447 REV B : EN-Standard Test Methods for Compressive Strength of Masonry Prisms
ASTM E448 : EN-Standard Practice for Scleroscope Hardness Testing of Metallic Materials-E1-10/1997; E2-12/2001
ASTM E449 : EN-Standard Test Methods for Analysis of Calcium Chloride
ASTM E45 : EN-Standard Test Methods for Determining the Inclusion Content of Steel-Supersedes ASTM E 1122: 1996
ASTM E45 REV A : EN-Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E450 : EN-STANDARD TEST METHOD FOR MEASUREMENT OF COLOR OF LOW-COLORED CLEAR LIQUIDS USING THE HUNTERLAB COLOR DIFFERENCE METER
ASTM E451 REV A : EN-STANDARD PRACTICE FOR TESTING PAVEMENT POLISHING IN THE LABORATORY (FULL-SCALE WHEEL METHOD)
ASTM E452 : EN-Standard Test Method for Calibration of Refractory Metal Thermocouples Using an Radiation Thermometer
ASTM E453 : EN-Standard Practice for Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties
ASTM E454 : EN-Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E455 : EN-Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
ASTM E455 REV A : EN-Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
ASTM E456 : EN-STANDARD TERMINOLOGY RELATING TO STATISTICS
ASTM E456 REV A : EN-STANDARD TERMINOLOGY RELATING TO STATISTICS
ASTM E456 REV B : EN-STANDARD TERMINOLOGY RELATING TO STATISTICS
ASTM E456 REV C : EN-STANDARD TERMINOLOGY RELATING TO STATISTICS
ASTM E457 : EN-Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E458 : EN-Standard Test Method for Heat of Ablation
ASTM E459 : EN-Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM E46 : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF LEAD- AND TIN-BASE SOLDER-(Discontinued 1994; No Replacement)
ASTM E460 : EN-STANDARD RECOMMENDED PRACTICE FOR DETERMINING EFFECT OF PACKAGING ON FOOD AND BEVERAGE PRODUCTS DURING STORAGE (R 1978)
ASTM E461 : EN-STANDARD PRACTICE FOR SENSORY EVALUATION OF INDUSTRIAL AND INSTITUTIONAL FOOD PURCHASES
ASTM E462 : EN-Standard Test Method for Odor and Taste Transfer from Packaging Film
ASTM E463 : EN-Standard Test Method for Silica in Fluorspar by the Silico-Molybdate Visible Spectrometry
ASTM E465 : EN-STANDARD TEST METHODS FOR MANGANESE DIOXIDE IN MANGANESE ORES
ASTM E465 REV A : EN-Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titration
ASTM E466 : EN-Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM E467 : EN-Standard Practice for Verification of Constant Amplitude Dynamic Loads on Displacements in an Axial Load Fatigue Testing System
ASTM E467 REV A : EN-Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
ASTM E468 : EN-Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
ASTM E47 : EN-Standard Test Methods for Chemical Analysis of Zinc Die-Casting Alloys
ASTM E471 : EN-Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
ASTM E472 : EN-Standard Practice for Reporting Thermoanalytical Data
ASTM E473 : EN-Standard Terminology Relating to Thermal Analysis
ASTM E473 REV A : EN-STANDARD TERMINOLOGY RELATING TO THERMAL ANALYSIS
ASTM E473 REV B : EN-Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E475 : EN-Standard Test Method for Assay of Di-Tert-Butyl Peroxide Using Gas Chromatography
ASTM E476 : EN-Standard Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test)
ASTM E477 : EN-STANDARD TEST METHOD FOR MEASURING ACOUSTICAL AND AIRFLOW PERFORMANCE OF DUCT LINER MATERIALS AND PREFABRICATED SILENCERS
ASTM E477 REV A : EN-Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM E478 : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF COPPER ALLOYS-DOCUMENT NOT AVAILABLE
ASTM E478 REV A : EN-Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM E479 : EN-Standard Guide for Preparation of a Leak Testing Specification
ASTM E480 : EN-STANDARD PRACTICE FOR ESTABLISHING CONDITIONS FOR LABORATORY SENSORY EVALUATION OF FOODS AND BEVERAGES
ASTM E481 : EN-Standard Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver
ASTM E482 : EN-Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance E706 (IID)
ASTM E483 : EN-STANDARD METHODS FOR SPECTROGRAPHIC ANALYSIS OF NICKEL ALLOYS BY THE SILVER CHLORIDE-LITHIUM FLUORIDE CARRIER TECHNIQUE
ASTM E485 : EN-Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-To-Plane Technique
ASTM E486 : EN-STANDARD TEST METHOD FOR SPECTROGRAPHIC ANALYSIS OF ADMIRALTY METAL BY THE CAST PIN AND POINT- TO-PLANE TECHNIQUES
ASTM E487 : EN-Standard Test Method for Constant-Temperature Stability of Chemical Materials
ASTM E488 : EN-Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements
ASTM E489 : EN-STANDARD TEST METHOD FOR TENSILE STRENGTH PROPERTIES OF STEEL TRUSS PLATES (R 1987)
ASTM E490 : EN-Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
ASTM E490 REV A : EN-Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
ASTM E491 : EN-Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
ASTM E492 : EN-Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
ASTM E493 : EN-Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E494 : EN-Standard Practice for Measuring Ultrasonic Velocity in Materials
ASTM E494 REV A : EN-STANDARD PRACTICE FOR MEASURING ULTRASONIC VELOCITY IN MATERIALS
ASTM E495 : EN-STANDARD TEST METHOD FOR FISSION ZIRCONIUM IN IRRADIATED NUCLEAR FUELS BY SPECTROPHOTOMETRY
ASTM E496 : EN-Standard Test Method for Measuring Neutron Fluence Rate and Average Energy from 3H(d )4He Neutron Generators by Radioactivation Techniques
ASTM E497 : EN-STANDARD RECOMMENDED PRACTICE INSTALLATION OF FIXED PARTITIONS OF LIGHT FRAME TYPE FOR THE PURPOSE OF CONSERVING THEIR SOUND INSULATION EFFICIENCY (R 1981) (E1-1985)
ASTM E498 : EN-Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM E499 : EN-STANDARD TEST METHODS FOR LEAKS USING THE MASS SPECTROMETER LEAK DETECTOR IN THE DETECTOR PROBE MODE
ASTM E50 : EN-Standard Practices for Apparatus Reagents and Safety Precautions for Chemical Analysis of Metals
ASTM E500 : EN-ULTRASONIC EXAMINATION TERMINOLOGY RELATING TO
ASTM E500 REV A : EN-STANDARD TERMINOLOGY RELATING TO ULTRASONIC EXAMINATION
ASTM E500 REV B : EN-STANDARD TERMINOLOGY RELATING TO ULTRASONIC EXAMINATION
ASTM E501 : EN-STANDARD SPECIFICATION FOR STANDARD TIRE FOR PAVEMENT SKID-RESISTANCE TESTS
ASTM E502 : EN-Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E502 REV A : EN-Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E503 : EN-STANDARD METHODS FOR MEASUREMENT OF SKID RESISTANCE ON PAVED SURFACES USING A PASSENGER VEHICLE DIAGONAL BRAKING TECHNIQUE
ASTM E503/E503M : EN-Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique
ASTM E504 : EN-Standard Practice for Selection of Electrode Material Used in Optical Emission Spectroscopy Based on Physical Properties
ASTM E505 : EN-Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
ASTM E506 : EN-STANDARD TEST METHOD FOR MERCURY IN LIQUID CHLORINE
ASTM E507 : EN-Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM E508 : EN-Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM E509 : EN-STANDARD RECOMMENDED GUIDE FOR IN-SERVICE ANNEALING OF WATER- COOLED NUCLEAR REACTOR VESSELS (R-1980)
ASTM E511 : EN-Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil Heat-Flux Transducer
ASTM E512 : EN-Standard Practice for Combined Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
ASTM E513 : EN-STANDARD DEFINITIONS OF TERMS RELATING TO CONSTANT-AMPLITUDE LOW-CYCLE FATIGUE TESTING (R 1980) (E1-1985)
ASTM E514 : EN-STANDARD TEST METHOD FOR WATER PERMEANCE OF MASONRY
ASTM E514 REV A : EN-Standard Test Method for Water Penetration and Leakage Through Masonry
ASTM E514 REV B : EN-Standard Test Method for Water Penetration and Leakage Through Masonry
ASTM E514 REV C : EN-Standard Test Method for Water Penetration and Leakage Through Masonry
ASTM E514/E514M : EN-Standard Test Method for Water Penetration and Leakage Through Masonry
ASTM E515 : EN-Standard Test Method for Leaks Using Bubble Emission Techniques
ASTM E516 : EN-STANDARD PRACTICE FOR TESTING THERMAL CONDUCTIVITY DETECTORS USED IN GAS CHROMATOGRAPHY
ASTM E516 REV A : EN-Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
ASTM E517 : EN-Standard Test Method for Plastic Strain Ratio r for Sheet Metal
ASTM E517 REV A : EN-STANDARD TEST METHOD FOR PLASTIC STRAIN RATIO R FOR SHEET METAL
ASTM E518 : EN-Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E518 REV A : EN-Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E518/E518M : EN-Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E519 : EN-Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
ASTM E519/E519M : EN-Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
ASTM E520 : EN-Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectroscopy
ASTM E521 : EN-STANDARD PRACTICE FOR NEUTRON RADIATION DAMAGE SIMULATION BY CHARGED-PARTICLE IRRADIATION
ASTM E523 : EN-Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper
ASTM E524 : EN-Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
ASTM E525 : EN-STANDARD RECOMMENDED PRACTICE FOR REPORTING DOSIMETRY RESULTS ON NUCLEAR GRAPHITE (R 1981)
ASTM E526 : EN-Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
ASTM E527 : EN-Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM E528 : EN-Standard Practices for Grounding Basic Optical Emission Spectrochemical Equipment
ASTM E529 : EN-STANDARD METHODS OF FLEXURAL TESTS ON BEAMS AND GIRDERS FOR BUILDING CONSTRUCTION (R 1991)
ASTM E53 : EN-Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM E53 REV A : EN-Standard Test Methods for Chemical Analysis of Copper
ASTM E531 : EN-Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
ASTM E533 : EN-Standard Test Method for Trace Amounts of Arsenic in Inorganic Industrial Chemicals
ASTM E534 : EN-Standard Test Methods for Chemical Analysis of Sodium Chloride
ASTM E535 : EN-Standard Practice for Preparation of Fire-Test-Response Standards
ASTM E535 REV A : EN-Standard Practice for Preparation of Fire-Test-Response Standards
ASTM E536 : EN-Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
ASTM E536 REV A : EN-Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
ASTM E537 : EN-Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
ASTM E538 : EN-Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
ASTM E539 : EN-Standard Test Method for X-Ray Fluorescence Spectrometric Analysis of 6Al-4V Titanium Alloy
ASTM E54 : EN-Standard Test Methods for Chemical Analysis of Special Brasses and Bronzes
ASTM E541 : EN-Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
ASTM E542 : EN-STANDARD PRACTICE FOR CALIBRATION OF VOLUMETRIC WARE
ASTM E542 REV A : EN-STANDARD PRACTICE FOR CALIBRATION OF VOLUMETRIC WARE
ASTM E543 : EN-Standard Specification for Agencies Performing Nondestructive Testing
ASTM E543 REV A : EN-Standard Specification for Agencies Performing Nondestructive Testing
ASTM E543 REV B : EN-STANDARD PRACTICE FOR DETERMINING THE QUALIFICATION OF NONDESTRUCTIVE TESTING AGENCIES
ASTM E543 REV C : EN-STANDARD PRACTICE FOR EVALUATING AGENCIES THAT PERFORM NONDESTRUCTIVE TESTING
ASTM E544 : EN-Standard Practices for Referencing Suprathreshold Odor Intensity
ASTM E545 : EN-Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
ASTM E546 : EN-Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
ASTM E547 : EN-Standard Test Method for Water Penetration of Exterior Windows Skylights Doors and Curtain Walls by Cyclic Static Air Pressure Difference
ASTM E548 : EN-STANDARD PRACTICE FOR PREPARATION OF CRITERIA FOR USE IN THE EVALUATION OF TESTING LABORATORIES AND INSPECTION BODIES
ASTM E549 : EN-STANDARD RECOMMENDED PRACTICE FOR PREPARING FIELD SPRAYER CALIBRATION PROCEDURES (R 1982)
ASTM E55 : EN-Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
ASTM E550 : EN-Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
ASTM E551 : EN-Standard Test Methods for Developing Effective Bird Control Chemicals
ASTM E552 : EN-Standard Test Method for Efficacy of Acute Mammalian Predacides
ASTM E554 : EN-STANDARD GUIDELINE FOR USE AND DEVELOPMENT OF STRYCHNINE AS AN AVICIDE (R 1980)
ASTM E555 : EN-Standard Practice for Determining Acute Oral LD50 for Testing Vertebrate Control Agents
ASTM E556 : EN-STANDARD TEST METHOD FOR CALIBRATING A WHEEL FORCE OR TORQUE TRANSDUCER USING A CALIBRATION PLATFORM (USER LEVEL)
ASTM E557 : EN-STANDARD PRACTICE FOR ARCHITECTURAL APPLICATION AND INSTALLATION OF OPERABLE PARTITIONS
ASTM E558 : EN-STANDARD TEST METHOD FOR TORSION TESTING OF WIRE (R 1994) (E1-1994)
ASTM E56 : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF SILVER BRAZING ALLOYS
ASTM E560 : EN-Standard Practice for Extrapolating Reactor Vessel Surveillance Dosimetry Results E 706(IC)
ASTM E561 : EN-Standard Test Method for K-R Curve Determination
ASTM E561 REV A : EN-STANDARD PRACTICE FOR R-CURVE DETERMINATION
ASTM E562 : EN-STANDARD TEST METHOD FOR DETERMINING VOLUME FRACTION BY SYSTEMATIC MANUAL POINT COUNT
ASTM E563 : EN-Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature-Discontinued February 1996 and Reinstated
ASTM E564 : EN-Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
ASTM E565 : EN-Standard Test Method for Efficacy of a Single-Dose Acute Rodenticide Under Laboratory Conditions for Commensal Rodents
ASTM E566 : EN-Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals
ASTM E567 : EN-Standard Test Method for Tertiary Hydroxyl Groups with Hydrogen Bromide
ASTM E569 : EN-Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
ASTM E57 : EN-STANDARD METHODS FOR CHEMICAL ANALYSIS OF WHITE METAL BEARING ALLOYS
ASTM E570 : EN-STANDARD PRACTICE FOR FLUX LEAKAGE EXAMINATION OF FERROMAGNETIC STEEL TUBULAR PRODUCTS
ASTM E571 : EN-Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
ASTM E572 : EN-Standard Test Method for X-Ray Emission Spectrometric Analysis of Stainless Steel
ASTM E572 REV A : EN-Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM E573 : EN-STANDARD PRACTICES FOR INTERNAL REFLECTION SPECTROSCOPY
ASTM E574 : EN-Standard Specification for Duplex Base Metal Thermocouple Wire with Glass Fiber or Silica Fiber Insulation
ASTM E575 : EN-Standard Practice for Reporting Data from Structural Tests of Building Constructions Elements Connections and Assemblies
ASTM E576 : EN-Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
ASTM E577 : EN-Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems
ASTM E578 : EN-Standard Test Method for Linearity of Fluorescence Measuring Systems
ASTM E579 : EN-Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate
ASTM E580 : EN-Standard Practice for Application of Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels in Areas Requiring Seismic Restraint
ASTM E580/E580M : EN-Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
ASTM E580/E580M REV A : EN-Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
ASTM E581 : EN-Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
ASTM E582 : EN-Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
ASTM E583 : EN-STANDARD RECOMMENDED PRACTICE FOR SYSTEMATIZING THE DEVELOPMENT OF (ASTM) VOLUNTARY CONSENSUS STANDARDS FOR THE SOLUTION OF NUCLEAR AND OTHER COMPLEX PROBLEMS (R 1982) (E1-1978) (E2-1979)
ASTM E584 : EN-STANDARD RECOMMENDED GUIDE FOR DEVELOPING THE (ASTM) VOLUNTARY CONSENSUS STANDARDS REQUIRED TO HELP IMPLEMENT THE NATIONAL ENERGY PLAN
ASTM E585 : EN-STANDARD SPECIFICATION FOR SHEATHED BASE-METAL THERMOCOUPLE MATERIALS
ASTM E585/E585M : EN-Standard Specification for Compacted Mineral-Insulated Metal-Sheathed Base Metal Thermocouple Cable
ASTM E585/E585M REV A : EN-Standard Specification for Compacted Mineral-Insulated Metal-Sheathed Base Metal Thermocouple Cable
ASTM E586 : EN-STANDARD DEFINITIONS OF TERMS RELATING TO INDUSTRIAL RADIOLOGY-(Discontinued 1991)
ASTM E586 REV A : EN-STANDARD TERMINOLOGY RELATING TO INDUSTRIAL RADIOLOGY
ASTM E586 REV B : EN-STANDARD TERMINOLOGY RELATING TO INDUSTRIAL RADIOLOGY
ASTM E587 : EN-Standard Practice for Ultrasonic Angle-Beam Examination by the Contact Method
ASTM E588 : EN-Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
ASTM E589 : EN-Standard Guide for the Use and Development of PA-14 Avian Stressing Agent
ASTM E59 : EN-Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E590 : EN-Standard Guide for the Use and Development of Sodium Monofluoroacetate (Compound 1080) as a Predacide
ASTM E591 : EN-STANDARD PRACTICE FOR SAFETY AND HEALTH REQUIREMENTS RELATING TO OCCUPATIONAL EXPOSURE TO OZONE
ASTM E592 : EN-Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60
ASTM E593 : EN-Standard Test Method for Efficacy of a Multiple-Dose Rodenticide under Laboratory Conditions
ASTM E594 : EN-STANDARD RECOMMENDED PRACTICE FOR TESTING FLAME IONIZATION DETECTORS USED IN GAS CHROMATOGRAPHY
ASTM E595 : EN-Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM E596 : EN-STANDARD TEST METHOD FOR LABORATORY MEASUREMENT OF THE NOISE REDUCTION OF SOUND-ISOLATING ENCLOSURES
ASTM E596 REV A : EN-Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E597 : EN-Standard Practice for Determining a Single-Number Rating of Airborne Sound Isolation for Use in Multiunit Building Specifications
ASTM E598 : EN-Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient Null-Point Calorimeter
ASTM E599 : EN-STANDARD TEST METHOD FOR EFFICACY OF SLIMICIDES FOR THE PAPER INDUSTRY – FUNGAL SLIME
ASTM E6 : EN-Standard Terminology Relating to Methods of Mechanical Testing
ASTM E6 REV A : EN-Standard Terminology Relating to Methods of Mechanical Testing
ASTM E6 REV B : EN-Standard Terminology Relating to Methods of Mechanical Testing
ASTM E60 : EN-STANDARD PRACTICE FOR PHOTOMETRIC METHODS FOR CHEMICAL ANALYSIS OF METALS
ASTM E600 : EN-Standard Test Method for Efficacy of Slimicides for the Paper Industry – Bacterial Slime
ASTM E601 : EN-Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
ASTM E601 REV A : EN-Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
ASTM E602 : EN-Standard Test Method for Sharp-Notch Tension Testing with Cylindrical Specimens
ASTM E603 : EN-Standard Guide for Room Fire Experiments
ASTM E603 REV A : EN-Standard Guide for Room Fire Experiments
ASTM E604 : EN-Standard Test Method for Dynamic Tear Testing of Metallic Materials
ASTM E605 : EN-STANDARD TEST METHODS FOR THICKNESS AND DENSITY OF SPRAYED FIRE-RESISTIVE MATERIAL APPLIED TO STRUCTURAL MEMBERS (R 1982)
ASTM E606 : EN-STANDARD RECOMMENDED PRACTICE FOR CONSTANT- AMPLITUDE LOW-CYCLE FATIGUE TESTING
ASTM E607 : EN-Standard Test Method for Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
ASTM E608 : EN-Standard Specification for Metal-Sheathed Base-Metal Thermocouples
ASTM E608/E608M : EN-Standard Specification for Mineral-Insulated Metal-Sheathed Base Metal Thermocouples
ASTM E609 : EN-Standard Terminology Relating to Pesticides
ASTM E609 REV A : EN-Standard Terminology Relating to Pesticides
ASTM E610 : EN-STANDARD TERMINOLOGY RELATING TO ACOUSTIC EMISSION
ASTM E610 REV A : EN-STANDARD TERMINOLOGY RELATING TO ACOUSTIC EMISSION
ASTM E611 : EN-Standard Test Methods for Low Concentrations of Diethylene Glycol in Ethylene Glycol by Gas Chromatography-(Discontinued 1996; No Replacement)
ASTM E612 : EN-Standard Guide for Field Evaluation of Nematode Control Agents – Site Selection Procedures
ASTM E613 : EN-Standard Guide for Evaluation of Nematode Control Agents – Side Effects of Nematicide Application on Other Organisms
ASTM E614 : EN-STANDARD GUIDE FOR GREENHOUSE OR GROWTH CHAMBER EVALUATION OF NEMATICIDES AGAINST ROOT-KNOT NEMATODE
ASTM E615 : EN-Standard Guide for Use and Development of Sodium Cyanide as a Predacide
ASTM E616 : EN-Standard Terminology Relating to Fracture Testing
ASTM E617 : EN-Standard Specification for Laboratory Weights and Precision Mass Standards
ASTM E618 : EN-Standard Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine
ASTM E619 : EN-Standard Practice for Evaluating Foreign Odors in Paper Packaging
ASTM E62 : EN-Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
ASTM E620 : EN-Standard Practice for REPORTING OPINIONS OF TECHNICAL EXPERTS
ASTM E621 : EN-Standard Practice for Use of Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E380)
ASTM E622 : EN-Standard Guide for Developing Computerized Systems
ASTM E623 : EN-STANDARD GUIDE FOR DEVELOPING FUNCTIONAL REQUIREMENTS FOR COMPUTERIZED SYSTEMS
ASTM E624 : EN-STANDARD GUIDE FOR DEVELOPING IMPLEMENTATION DESIGNS FOR COMPUTERIZED SYSTEMS
ASTM E625 : EN-Standard Guide for Training Users of Computerized Systems
ASTM E626 : EN-STANDARD GUIDE FOR EVALUATING COMPUTERIZED SYSTEMS
ASTM E627 : EN-STANDARD GUIDE FOR DOCUMENTING COMPUTERIZED SYSTEMS
ASTM E628 : EN-Standard Guide for Field Evaluation of Nematode Control Agents – Test Materials and Environmental Conditions
ASTM E629 : EN-Standard Guide for Field Evaluation of Nematode Control Agents – Determination of Nematode Population Responses to Control Agents
ASTM E630 : EN-Standard Guide for Evaluation of Nematode Control Agents – Plant Responses
ASTM E631 : EN-STANDARD TERMINOLOGY OF BUILDING CONSTRUCTIONS
ASTM E631 REV A : EN-STANDARD TERMINOLOGY OF BUILDING CONSTRUCTIONS
ASTM E631 REV B : EN-STANDARD TERMINOLOGY OF BUILDING CONSTRUCTIONS
ASTM E631 REV C : EN-STANDARD TERMINOLOGY OF BUILDING CONSTRUCTIONS
ASTM E632 : EN-Standard Practice for Developing Accelerated Tests to Aid Prediction of the Service Life of Building Components and Materials
ASTM E633 : EN-Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800 Degrees F (1000 Degrees C) in Airhelp
ASTM E634 : EN-Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis
ASTM E636 : EN-STANDARD PRACTICE FOR CONDUCTING SUPPLEMENTAL SURVEILLANCE TESTS FOR NUCLEAR POWER REACTOR VESSELS E 706(IH)
ASTM E637 : EN-Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
ASTM E638 : EN-Standard Test Method for Calibration of Heat Transfer Rate Calorimeters Using a Narrow-Angle Blackbody Radiation Facility
ASTM E639 : EN-Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
ASTM E640 : EN-Standard Test Method for Preservatives in Water-Containing Cosmetics
ASTM E641 : EN-Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
ASTM E642 : EN-Standard Practice for Determining Application Rates and Distribution Patterns from Aerial Application Equipment
ASTM E643 : EN-Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
ASTM E644 : EN-Standard Test Methods for Testing Industrial Resistance Thermometers
ASTM E645 : EN-Standard Test Method for Efficacy of Microbicides Used in Cooling Water Systems
ASTM E645 REV A : EN-Standard Test Method for Efficacy of Microbicides Used in Cooling Systems
ASTM E646 : EN-Standard Test Method for Tensile Strain-Hardening Exponents (n-Values) of Metallic Sheet Materials
ASTM E647 : EN-STANDARD TEST METHOD FOR MEASUREMENT OF FATIGUE CRACK GROWTH RATES
ASTM E647 REV A : EN-Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E648 : EN-STANDARD TEST METHOD FOR CRITICIAL RADIANT FLUX OF FLOOR-COVERING SYSTEMS USING A RADIANT HEAT ENERGY SOURCE
ASTM E648 REV A : EN-Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ASTM E648 REV B : EN-Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ASTM E649 : EN-Standard Test Method for Bromine in Chlorine
ASTM E650 : EN-Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors
ASTM E651 : EN-Standard Guidelines for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
ASTM E651/E651M : EN-Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
ASTM E652 : EN-Standard Test Method for Nonresidual Liquid Household Insecticides Against Flying Insects
ASTM E653 : EN-Standard Test Method for Effectiveness of Aerosol and Pressurized Space Spray Insecticides Against Flying Insects
ASTM E654 : EN-Standard Test Method for Testing Effectiveness of Aerosol and Pressurized Spray Insecticides Against Cockroaches
ASTM E655 : EN-Standard Guide for Evaluation of Nematicides Against Root-Knot Nematode – Population Eradication Test
ASTM E656 : EN-STANDARD GUIDE FOR EVALUATION OF HATCHING HETERODERA SCHACHTII LARVAE (R 1987)
ASTM E657 : EN-Standard Test Method for Comparative Acute and Long-Term Oral or Gustatory Avian Repellency
ASTM E658 : EN-Standard Test Method for Efficacy of Dog Repellents Designed for Direct Application to Garbage Bags
ASTM E659 : EN-Standard Test Method for Autoignition Temperature of Liquid Chemicals
ASTM E660 : EN-Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel Circular Track Polishing Machine
ASTM E661 : EN-Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing under Concentrated Static and Impact Loads
ASTM E662 : EN-STANDARD TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS
ASTM E662 REV A : EN-STANDARD TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS
ASTM E663 : EN-Standard Practice for Flame Atomic Absorption Analysis
ASTM E664 : EN-Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
ASTM E664/E664M : EN-Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
ASTM E665 : EN-Standard Practice for Using Absorbed Dose Versus Depth in Materials to Verify the X-Ray Output of Flash X-Ray Machines
ASTM E666 : EN-Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation
ASTM E667 : EN-Standard Specification for Mercury-in-Glass Maximum Self-Registering Clinical Thermometers
ASTM E668 : EN-STANDARD PRACTICE FOR THE APPLICATION OF THERMOLUMINESCENCE- DOSIMETRY (TLD) SYSTEMS FOR DETERMINING ABSORBED DOSE IN RADIATION- HARDNESS TESTING OF ELECTRONIC DEVICES (R 1984)
ASTM E669 : EN-STANDARD MASTER MATRIX FOR NUCLEAR FUEL CYCLE STANDARDS
ASTM E670 : EN-Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
ASTM E671 : EN-Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
ASTM E672 : EN-Standard Specification for Disposable Glass Micropipets
ASTM E673 : EN-STANDARD TERMINOLOGY RELATING TO SURFACE ANALYSIS
ASTM E673 REV A : EN-SURFACE ANALYSIS DEFINITION OF TERMS RELATING TO
ASTM E673 REV B : EN-STANDARD TERMINOLOGY RELATING TO SURFACE ANALYSIS
ASTM E673 REV C : EN-STANDARD TERMINOLOGY RELATING TO SURFACE ANALYSIS
ASTM E673 REV D : EN-STANDARD DEFINITIONS OF TERMS RELATING TO SURFACE ANALYSIS
ASTM E674 : EN-Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E675 : EN-Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
ASTM E676 : EN-Standard Specification for Interchangeable Taper-Ground Joints
ASTM E677 : EN-Standard Specification for Interchangeable Spherical Ground Joints
ASTM E678 : EN-Standard Practice for Evaluation of Technical Data
ASTM E679 : EN-Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
ASTM E680 : EN-Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM E681 : EN-Standard Test Method for Concentration Limits of Flammability of Chemicals
ASTM E682 : EN-STANDARD PRACTICE FOR LIQUID CHROMATOGRAPHY TERMS AND RELATIONSHIPS
ASTM E683 : EN-Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings
ASTM E684 : EN-Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter Depth Profiling of Solid Surfaces
ASTM E685 : EN-Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
ASTM E686 : EN-STANDARD METHOD FOR EVALUATION OF ANTIMICROBIAL AGENTS IN AQUEOUS METAL WORKING FLUIDS
ASTM E687 : EN-STANDARD PRACTICE FOR SENSORY EVALUATION PROCEDURE TO ESTABLISH GUIDELINES FOR OPEN- DATING FOOD AND BEVERAGE PRODUCTS
ASTM E688 : EN-STANDARD TEST METHODS FOR WASTE GLASS AS A RAW MATERIAL FOR MANUFACTURE OF GLASS CONTAINERS (R 1988) (E1-1994)
ASTM E689 : EN-Standard Reference Radiographs for Ductile Iron Castings
ASTM E69 : EN-Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
ASTM E69 REV A : EN-Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
ASTM E690 : EN-Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes
ASTM E691 : EN-STANDARD PRACTICE FOR CONDUCTING AN INTERLABORATORY TEST PROGRAM TO DETERMINE THE PRECISION OF TEST METHODS
ASTM E692 : EN-Standard Test Method for Determining the Content of Cesium-137 in Irradiated Nuclear Fuels by High-Resolution Gamma-Ray Spectral Analysis
ASTM E693 : EN-Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA) E 706(ID)
ASTM E694 : EN-STANDARD SPECIFICATION FOR VOLUMETRIC WARE
ASTM E695 : EN-Standard Test Method of Measuring Relative Resistance of Wall Floor and Roof Construction to Impact Loading
ASTM E696 : EN-STANDARD SPECIFICATION FOR TUNGSTEN-RHENIUM ALLOY THERMOCOUPLE WIRE
ASTM E697 : EN-STANDARD PRACTICE FOR USE OF ELECTRON-CAPTURE DETECTORS USED IN GAS CHROMATOGRAPHY
ASTM E698 : EN-Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials
ASTM E699 : EN-Standard Practice for Evaluation of Agencies Involved in Testing Quality Assurance and Evaluating of Building Components
ASTM E7 : EN-Standard Terminology Relating to Metallography
ASTM E7 REV A : EN-STANDARD TERMINOLOGY RELATING TO METALLOGRAPHY
ASTM E7 REV B : EN-STANDARD TERMINOLOGY RELATING TO METALLOGRAPHY
ASTM E7 REV D : EN-STANDARD DEFINITIONS OF TERMS RELATING TO METALLOGRAPHY
ASTM E70 : EN-Standard Test Method for pH of Aqueous Solutions with the Glass Electrode-AASHTO T200
ASTM E701 : EN-Standard Test Methods for Municipal Ferrous Scrap
ASTM E702 : EN-Standard Specification for Municipal Ferrous Scrap
ASTM E703 : EN-Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals
ASTM E704 : EN-Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
ASTM E705 : EN-STANDARD TEST METHOD FOR MEASURING REACTION RATES BY RADIOACTIVATION OF NEPTUNIUM-237
ASTM E706 : EN-Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards E 706(0)
ASTM E707 : EN-STANDARD TEST METHOD FOR SKID RESISTANCE OF PAVED SURFACES USING THE NORTH CAROLINA STATE UNIVERSITY VARIABLE- SPEED FRICTION TESTER (R 1984)
ASTM E708 : EN-Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
ASTM E709 : EN-STANDARD PRACTICE FOR MAGNETIC PARTICLE EXAMINATION
ASTM E710 : EN-Standard Test Method for Comparing EMF Stabilities of Base-Metal Thermoelements in Air Using Dual Simultaneous Thermal-EMF Indicators
ASTM E711 : EN-Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
ASTM E712 : EN-Standard Practice for Laboratory Screening of Metallic Containment Materials for Use with Liquids in Solar Heating and Cooling Systems
ASTM E713 : EN-STANDARD GUIDE FOR SELECTION OF SCALES FOR METRIC BUILDING DRAWINGS
ASTM E714 : EN-Standard Specification for Disposable Glass Serological Pipets
ASTM E715 : EN-Standard Specification for Gravity-Convection and Forced-Circulation Water Baths
ASTM E716 : EN-Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
ASTM E717 : EN-Standard Guide for Preparation of the Accreditation Annex of Acoustical Test Standards
ASTM E718 : EN-STANDARD METHOD FOR SPECTROGRAPHIC ANALYSIS OF CARTRIDGE BRASS
ASTM E719 : EN-STANDARD TEST METHOD FOR INDENTATION OF BUILDING MATERIALS SURFACES UNDER CONCENTRATED LOADS AS A MEASURE OF SERVICEABILITY
ASTM E72 : EN-Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
ASTM E720 : EN-STANDARD GUIDE FOR SELECTION OF A SET OF NEUTRON-ACTIVATION FOILS FOR DETERMINING NEUTRON SPECTRA USED IN RADIATION-HARDNESS TESTING OF ELECTRONICS
ASTM E721 : EN-STANDARD METHOD FOR DETERMINING NEUTRON ENERGY SPECTRA WITH NEUTRON-ACTIVATION FOILS FOR RADIATION- HARDNESS TESTING OF ELECTRONICS
ASTM E722 : EN-Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics
ASTM E723 : EN-Standard Test Method for Efficacy of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage)
ASTM E724 : EN-STANDARD PRACTICE FOR CONDUCTING STATIC ACUTE TOXICITY TESTS WITH LARVAE OF FOUR SPECIES OF BIVALVE MOLLUSCS
ASTM E725 : EN-Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM E726 : EN-STANDARD TEST METHOD FOR PARTICLE SIZE DISTRIBUTION OF GRANULAR CARRIERS OR GRANULAR PESTICIDES
ASTM E727 : EN-STANDARD TEST METHODS FOR FREE-FALL BULK DENSITY OF GRANULAR CARRIERS AND GRANULAR CARRIES AND GRANULAR PESTICIDES
ASTM E727/E727M : EN-Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E728 : EN-Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
ASTM E729 : EN-STANDARD PRACTICE FOR CONDUCTING ACUTE TOXICITY TESTS WITH FISHES MACROINVERTEBRATES AND AMPHIBIANS
ASTM E729 REV A : EN-STANDARD GUIDE FOR CONDUCTING ACUTE TOXICITY TESTS WITH FISHES MACROINVERTEBRATES AND AMPHIBIANS (E1-1989)
ASTM E73 : EN-Standard Practice for Static Load Testing of Truss Assemblies
ASTM E730 : EN-STANDARD GUIDE FOR DEVELOPING FUNCTIONAL DESIGNS FOR COMPUTERIZED SYSTEMS
ASTM E731 : EN-Standard Guide for Selection and Acquisition of Commercially Available Computerized Systems
ASTM E732 : EN-Standard Specification for Disposable Pasteur-Type Pipet
ASTM E733 : EN-Standard Specification for 44.7-Microliter Disposable Glass Micropipets
ASTM E734 : EN-Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
ASTM E735 : EN-STANDARD SPECIFICATION FOR MINIMUM PERFORMANCE STANDARDS FOR HAND-HELD PIPETTORS WITH PIPET TIPS
ASTM E736 : EN-Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
ASTM E737 : EN-Standard Practice for Installation of Storm Windows Replacement Windows Multi-Glazing Storm Doors and Replacement Doors
ASTM E738 : EN-Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by Complexometric Titration
ASTM E738 REV A : EN-Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by Complexometric Titration
ASTM E739 : EN-Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (e-N) Fatigue Data
ASTM E74 : EN-Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E74 REV A : EN-Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E740 : EN-Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM E741 : EN-STANDARD TEST METHODS FOR DETERMINING AIR CHANGE IN A SINGLE ZONE BY MEANS OF A TRACER GAS DILUTION
ASTM E742 : EN-STANDARD DEFINITIONS OF TERMS RELATING TO ENVIRONMENTALLY AFFECTED FATIGUE TESTING
ASTM E743 : EN-Standard Guide for Spectrochemical Laboratory Quality Assurance
ASTM E744 : EN-Standard Practice for Evaluating Solar Absorptive Materials for Thermal Applications
ASTM E745 : EN-Standard Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use with Heat-Transfer Fluids in Solar Heating and Cooling Systems
ASTM E746 : EN-Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E747 : EN-STANDARD TEST METHOD FOR CONTROLLING QUALITY OF RADIOGRAPHIC TESTING USING WIRE PENETRAMETERS
ASTM E747 REV A : EN-STANDARD METHOD FOR CONTROLLING QUALITY OF RADIOGRAPHIC TESTING USING WIRE PENETRAMETERS
ASTM E748 : EN-STANDARD PRACTICES FOR THERMAL NEUTRON RADIOGRAPHY OF MATERIALS
ASTM E749 : EN-Standard Practice for Acoustic Emission Monitoring During Continuous Welding
ASTM E75 : EN-Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
ASTM E750 : EN-STANDARD PRACTICE FOR MEASURING THE OPERATING CHARACTERISTICS OF ACOUSTIC EMISSION INSTRUMENTATION
ASTM E751 : EN-Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
ASTM E752 : EN-Standard Practice for Safety and Health Requirements Relating to Occupational Exposure to Carbon Disulfide
ASTM E753 : EN-Standard Specification for Municipal Aluminum Scrap (MAS)
ASTM E754 : EN-Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM E755 : EN-Standard Test Method for Dicumyl Peroxide Assay (Liquid Chromatography)
ASTM E756 : EN-Standard Test Method for Measuring Vibration-Damping Properties of Materials
ASTM E757 : EN-Standard Test Method for Efficacy of Canine Reproduction Inhibitors
ASTM E758 : EN-Standard Test Method for Mammalian Acute Percutaneous Toxicity
ASTM E759 : EN-Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E76 : EN-Standard Test Methods for Chemical Analysis of Nickel-Copper Alloys
ASTM E760 : EN-Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E761 : EN-Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E763 : EN-Standard Practice for Calculation of Absorbed Dose from Neutron Irradiation by Application of Threshold-Foil Measurement Data
ASTM E764 : EN-Standard Practice for Identifying Test Methods for Breeder Reactor Core Materials
ASTM E765 : EN-EVALUATION OF COVER MATERIALS FOR FLAT PLATE SOLAR COLLECTORS PRACTICE FOR
ASTM E766 : EN-STANDARD PRACTICE FOR CALIBRATING THE MAGNIFICATION OF SEM USING NBS-SRM-484
ASTM E767 : EN-Standard Test Method for Shear Strength Properties of Metal Connector Plates
ASTM E768 : EN-Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
ASTM E769 : EN-Standard Test Methods for Odor of Methanol Ethanol n-Propanol and Isopropanol
ASTM E77 : EN-Standard Test Method for Inspection and Verification of Thermometers
ASTM E770 : EN-STANDARD TEST METHOD FOR CLASSIFYING PAVEMENT SURFACE TEXTURES
ASTM E771 : EN-Standard Test Method for Spontaneous Heating Tendency of Materials
ASTM E772 : EN-Standard Terminology Relating to Solar Energy Conversion
ASTM E773 : EN-Standard Test Methods for Seal Durability of Sealed Insulating Glass Units
ASTM E774 : EN-Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units
ASTM E774 REV A : EN-STANDARD SPECIFICATION FOR SEALED INSULATING GLASS UNITS
ASTM E775 : EN-Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
ASTM E776 : EN-Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM E777 : EN-Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM E778 : EN-Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM E779 : EN-Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E780 : EN-Standard Test Method for Measuring the Insulation Resistance of Sheathed Thermocouple Material at Room Temperature
ASTM E781 : EN-Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors with Cover Plates
ASTM E782 : EN-Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering under Conditions Simulating Operational Mode
ASTM E783 : EN-Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors-(Reinstated)
ASTM E784 : EN-Standard Specification for Clamps Utility Laboratory and Holders Buret and Clamp
ASTM E785 : EN-Standard Specification for Crucibles Ignition Laboratory Metal
ASTM E786 : EN-Standard Specification for Dishes Evaporating Platinum
ASTM E787 : EN-Standard Specification for Disposable Glass Micro Blood Collection Pipets
ASTM E788 : EN-Standard Specification for Pipet Blood Diluting
ASTM E789 : EN-STANDARD TEST METHOD FOR PRESSURE AND RATE OF PRESSURE RISE FOR DUST EXPLOSIONS IN A CLOSED VESSEL
ASTM E790 : EN-Standard Test Method for Residual Moisture in a Refuse-Derived Fuel Analysis Sample
ASTM E791 : EN-Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
ASTM E792 : EN-Standard Guide for Selection of a Clinical Laboratory Information Management System
ASTM E793 : EN-STANDARD TEST METHOD FOR HEATS OF FUSION AND CRYSTALLIZATION BY DIFFERENTIAL SCANNING CALORIMETRY (E1-1989) (R 1989)
ASTM E794 : EN-Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
ASTM E795 : EN-STANDARD PRACTICES FOR MOUNTING TEST SPECIMENS DURING SOUND ABSORPTION TESTS
ASTM E796 : EN-Standard Test Method for Ductility Testing of Metallic Foil
ASTM E796 REV A : EN-STANDARD TEST METHOD FOR DUCTILITY TESTING OF METALLIC FOIL
ASTM E797 : EN-STANDARD PRACTICE FOR MEASURING THICKNESS BY MANUAL ULTRASONIC PULSE-ECHO CONTACT METHOD
ASTM E797/E797M : EN-Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
ASTM E798 : EN-Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources
ASTM E799 : EN-Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
ASTM E8 : EN-STANDARD TEST METHODS OF TENSION TESTING OF METALLIC MATERIALS (AASHTO NO. T 68)
ASTM E8 REV A : EN-STANDARD TEST METHODS OF TENSION TESTING OF METALLIC MATERIALS (AASHTO NO. T 68)
ASTM E8 REV B : EN-STANDARD TEST METHODS OF TENSION TESTING OF METALLIC MATERIALS (AASHTO NO. T 68)
ASTM E8 REV C : EN-STANDARD TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS (AASHTO T68)
ASTM E8/E8M : EN-Standard Test Methods for Tension Testing of Metallic Materials
ASTM E800 : EN-Standard Guide for Measurement of Gases Present or Generated During Fires
ASTM E801 : EN-Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices
ASTM E802 : EN-STANDARD REFERENCE RADIOGRAPHS FOR GRAY IRON CASTINGS UP TO 4 1/2 IN. (114MM) IN THICKNESS (R 1988)
ASTM E803 : EN-Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams
ASTM E804 : EN-STANDARD PRACTICE FOR CALIBRATION OF THE ULTRASONIC TEST SYSTEM BY EXTRAPOLATION BETWEEN FLAT-BOTTOM HOLE SIZES
ASTM E805 : EN-Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E805 REV A : EN-Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E806 : EN-Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
ASTM E807 : EN-STANDARD PRACTICE FOR METALLOGRAPHIC LABORATORY EVALUATION
ASTM E808 : EN-STANDARD PRACTICE FOR DESCRIBING RETROREFLECTION
ASTM E808 REV A : EN-Standard Practice for Describing Retroreflection
ASTM E808 REV B : EN-STANDARD PRACTICE FOR DESCRIBING RETROREFLECTION
ASTM E809 : EN-STANDARD PRACTICE FOR MEASURING PHOTOMETRIC CHARACTERISTICS OF RETROREFLECTORS
ASTM E809 REV A : EN-Standard Practice for Measuring Photometric Characteristics of Retroreflectors
ASTM E809 REV B : EN-STANDARD PRACTICE FOR MEASURING PHOTOMETRIC CHARACTERISTICS OF RETROREFLECTORS
ASTM E81 : EN-STANDARD TEST METHOD FOR PREPARING QUANTITATIVE POLE FIGURES
ASTM E810 : EN-STANDARD TEST METHOD FOR COEFFICIENT OF RETROREFLECTION OF RETROREFLECTIVE SHEETING
ASTM E810 REV A : EN-STANDARD TEST METHOD FOR COEFFICIENT OF RETROREFLECTION OF RETROREFLECTIVE SHEETING
ASTM E810 REV B : EN-STANDARD TEST METHOD FOR COEFFICIENT OF RETROREFLECTION OF RETROREFLECTIVE SHEETING
ASTM E811 : EN-STANDARD PRACTICE FOR MEASURING COLORIMETRIC CHARACTERISTICS OF RETROREFLECTORS UNDER NIGHTTIME CONDITIONS
ASTM E811 REV A : EN-STANDARD PRACTICE FOR MEASURING COLORIMETRIC CHARACTERISTICS OF RETROREFLECTORS UNDER NIGHTTIME CONDITIONS
ASTM E811 REV B : EN-STANDARD PRACTICE FOR MEASURING COLORIMETRIC CHARACTERISTICS OF RETROREFLECTORS UNDER NIGHTTIME CONDITIONS
ASTM E812 : EN-Standard Test Method for Crack Strength of Slow-Bend Precracked Charpy Specimens of High-Strength Metallic Materials
ASTM E813 : EN-STANDARD TEST METHOD FOR JIC A MEASURE OF FRACTURE TOUGHNESS
ASTM E814 : EN-Standard Test Method for Fire Tests of Through-Penetration Fire Stops
ASTM E814 REV A : EN-STANDARD TEST METHOD FOR FIRE TESTS OF THROUGH- PENETRATION FIRE STOPS
ASTM E814 REV B : EN-Standard Test Method for Fire Tests of Through-Penetration Fire Stops
ASTM E815 : EN-Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titration
ASTM E816 : EN-Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrhliometers
ASTM E819 : EN-Standard Test Method for Trace Amounts of Arsenic in Organic Industrial Chemicals
ASTM E82 : EN-Standard Test Method for Determining the Orientation of a Metal Crystal
ASTM E820 : EN-STANDARD PRACTICE FOR DETERMINING ABSOLUTE ABSORBED DOSE RATES FOR ELECTRON BEAMS
ASTM E821 : EN-STANDARD PRACTICE FOR MEASUREMENT OF MECHANICAL PROPERTIES DURING CHARGED-PARTICLE IRRADIATION
ASTM E822 : EN-Standard Practice for Determining Resistance of Solar Collector Covers to Hail by Impact with Propelled Ice Balls
ASTM E823 : EN-Standard Practice for Nonoperational Exposure and Inspection of a Solar Collector
ASTM E824 : EN-Standard Test Method for Transfer of Calibration from Reference to Field Radiometers
ASTM E825 : EN-Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E826 : EN-Standard Practice for Testing Homogeneity of Materials for the Development of Reference Materials
ASTM E827 : EN-Standard Practice for Indentifying Elements by the Peaks in Auger Electron Spectroscopy
ASTM E828 : EN-Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis
ASTM E829 : EN-STANDARD TEST METHOD FOR PREPARING RDF LABORATORY SAMPLES FOR ANALYSIS
ASTM E83 : EN-STANDARD PRACTICE FOR VERIFICATION AND CLASSIFICATION OF EXTENSOMETERS
ASTM E83 REV A : EN-Standard Practice for Verification and Classification of Extensometer Systems
ASTM E830 : EN-Standard Test Method for Ash in the Analysis Sample of Refuse-Derived Fuel
ASTM E831 : EN-Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E832 : EN-Standard Specification for Laboratory Filter Papers
ASTM E833 : EN-Standard Terminology of Building Economics
ASTM E833 REV A : EN-Standard Terminology of Building Economics
ASTM E833 REV B : EN-Standard Terminology of Building Economics
ASTM E834 : EN-Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
ASTM E835 : EN-STANDARD GUIDE FOR DIMENSIONAL COORDINATION OF STRUCTURAL CLAY UNITS CONCRETE MASONRY UNITS AND CLAY FLUE LININGS (DISCONTINUED – COMBINED WITH E835/ E835M) (E1-1984)-(Discontinued 1992; No Replacement)
ASTM E835/E835M : EN-Standard Guide for Modular Coordination of Clay and Concrete Masonary Units
ASTM E835M : EN-STANDARD GUIDE FOR DIMENSIONAL COORDINATION OF STRUCTURAL CLAY UNITS CONCRETE MASONRY UNITS AND CLAY FLUE LININGS (METRIC)
ASTM E837 : EN-Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837 REV A : EN-STANDARD TEST METHOD FOR DETERMINING RESIDUAL STRESSES BY THE HOLE- DRILLING STRAIN-GAGE METHOD
ASTM E838 : EN-STANDARD PRACTICE FOR PERFORMING ACCELERATED OUTDOOR WEATHERING USING CONCENTRATED NATURAL SUNLIGHT
ASTM E839 : EN-Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Material-Reinstated
ASTM E84 : EN-Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84 REV A : EN-Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84 REV B : EN-Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84 REV C : EN-Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E840 : EN-Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
ASTM E841 : EN-Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectrometry
ASTM E842 : EN-STANDARD SPECIFICATION FOR LAWN BUILDINGS
ASTM E843 : EN-Specifications for Patio Covers Carports and Canopies
ASTM E844 : EN-Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance E 706(IIC)
ASTM E845 : EN-STANDARD METHOD FOR CALIBRATION OF DOSIMETERS AGAINST AN ADIABATIC CALORIMETER FOR USE IN FLASH X-RAY FIELDS
ASTM E846 : EN-STANDARD MATRIX FOR LIGHT-WATER REACTOR SPENT-FUEL TRANSPORTATION
ASTM E848 : EN-STANDARD PRACTICE FOR SAFETY AND HEALTH REQUIREMENTS RELATING TO OCCUPATIONAL EXPOSURE TO WATER- INSOLUBLE CHROMATES (R 1993)
ASTM E849 : EN-STANDARD PRACTICE FOR SAFETY AND HEALTH REQUIREMENTS RELATING TO OCCUPATIONAL EXPOSURE TO ASBESTOS
ASTM E850 : EN-Standard Practice for Use of Inorganic Process Wastes as Structural Fill
ASTM E851 : EN-Standard Practice for Evaluation of Spectrochemical Laboratories
ASTM E852 : EN-STANDARD TEST METHODS FOR C4-C13 PLASTICIZER GRADE ALCOHOLS-(Discontinued 2000; No Replacement)
ASTM E852 REV A : EN-Standard Test Methods for C4-C13 Plasticizer Grade Alcohols
ASTM E853 : EN-Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results E706(IA)
ASTM E854 : EN-Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance E706(IIIB)
ASTM E855 : EN-Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E856 : EN-Standard Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel
ASTM E857 : EN-Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
ASTM E858 : EN-STANDARD TEST METHOD FOR BIREFRINGENCE IN FIBERS OF CIRCULAR CROSS SECTION BY A VARIABLE COMPENSATOR
ASTM E859 : EN-STANDARD TEST METHOD FOR AIR EROSION OF SPRAYED FIRE-RESISTIVE MATERIALS APPLIED TO STRUCTURAL MEMBERS
ASTM E86 : EN-Standard Methods for Chemical Analysis of Antimony
ASTM E860 : EN-Standard Practice for Examining and Testing Items That Are or May Become Involved in Products Liability Litigation
ASTM E861 : EN-Standard Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors
ASTM E862 : EN-Screening Polymeric Containment Materials for the Effects of Heat and Heat Transfer Fluids in Solar Heating and Cooling Systems Practice for
ASTM E863 : EN-Standard Practice for Describing Flame Atomic Absorption Spectroscopy Equipment
ASTM E864 : EN-Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
ASTM E865 : EN-Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
ASTM E866 : EN-STANDARD SPECIFICATION FOR CORROSION-INHIBITING ADHESIVE PRIMER FOR ALUMINUM ALLOYS TO BE ADHESIVELY BONDED IN HONEYCOMB SHELTER PANELS
ASTM E867 : EN-Terminology Relating to Vehicle-Pavement Systems
ASTM E867 REV A : EN-Terminology Relating to Vehicle-Pavement Systems
ASTM E867 REV B : EN-STANDARD TERMINOLOGY RELATING TO TRAVELED SURFACE CHARACTERISTICS
ASTM E868 : EN-Standard Test Methods for Conducting Performance Tests on Mechanical Conveying Equipment Used in Resource Recovery Systems
ASTM E869 : EN-Standard Test Method for Performance Evaluation of Fuel Ethanol Manufacturing Facilities
ASTM E87 : EN-Photometric Methods for Chemical Analysis of Lead Tin Antimony and Their Alloys
ASTM E870 : EN-Standard Test Methods for Analysis of Wood Fuels
ASTM E871 : EN-Standard Method for Moisture Analysis of Particulate Wood Fuels
ASTM E872 : EN-Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM E873 : EN-Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM E874 : EN-Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
ASTM E875 : EN-STANDARD TEST METHODS FOR EFFICACY OF FUNGAL CONTROL AGENTS AS PRESERVATIVES FOR AQUEOUS-BASED PRODUCTS USED IN THE PAPER INDUSTRY
ASTM E876 : EN-STANDARD PRACTICE FOR USE OF STATISTICS IN THE EVALUATION OF SPECTROMETRIC DATA
ASTM E877 : EN-Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials
ASTM E878 : EN-STANDARD TEST METHOD FOR TITANIUM IN IRON ORES BY THE DIANTIPYRYLMETHANE PHOTOMETRIC METHOD (R 1991)
ASTM E879 : EN-Standard Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements
ASTM E88 : EN-Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
ASTM E880 : EN-Standard Guide for Evaluating the Usefulness of Herbicides on Corn (All Types)
ASTM E881 : EN-Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode
ASTM E882 : EN-STANDARD GUIDE FOR ACCOUNTABILITY AND QUALITY CONTROL IN THE CHEMICAL ANALYSIS LABORATORY
ASTM E883 : EN-STANDARD PRACTICE FOR METALLOGRAPHIC PHOTOMICROGRAPHY
ASTM E884 : EN-Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities
ASTM E885 : EN-STANDARD TEST METHODS FOR ANALYSIS OF METALS IN REFUSE-DERIVED FUEL BY ATOMIC ABSORPTION SPECTROPHOTOMETRY
ASTM E886 : EN-STANDARD TEST METHODS FOR DISSOLUTION OF REFUSE- DERIVED FUEL (RDF-3) ASH SAMPLES FOR ANALYSIS OF METALS
ASTM E887 : EN-STANDARD TEST METHOD FOR SILICA IN REFUSE-DERIVED FUEL-3(RDF-3) AND RDF-3 ASH
ASTM E889 : EN-Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM E890 : EN-Standard Specification for Disposable Glass Culture Tubes
ASTM E891 : EN-STANDARD TERRESTRIAL DIRECT NORMAL SOLAR SPECTRAL IRRADIANCE TABLES FOR AIR MASS 1.5
ASTM E892 : EN-Standard Tables for Terrestrial Solar Spectral Irradiance at Air Mass 1.5 for a 37 Degree Tilted Surface
ASTM E894 : EN-Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
ASTM E895 : EN-Standard Practice for Determination of Hydrolysis Rate Constants of Organic Chemicals in Aqueous Solutions
ASTM E896 : EN-Standard Test Method for Conducting Aqueous Direct Photolysis Tests
ASTM E897 : EN-STANDARD TEST METHOD FOR VOLATILE MATTER IN THE ANALYSIS SAMPLE OF REFUSE-DERIVED FUEL-3
ASTM E898 : EN-STANDARD METHOD OF TESTING TOP-LOADING DIRECT-READING LABORATORY SCALES AND BALANCES
ASTM E899 : EN-STANDARD GUIDE FOR RECORDS MANAGEMENT IN MASS SPECTROMETRY LABORATORIES PERFORMING ANALYSIS IN SUPPORT OF NONCLINICAL LABORATORY STUDIES
ASTM E8M : EN-STANDARD TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS (METRIC)
ASTM E8M REV A : EN-Standard Test Methods for Tension Testing of Metallic Materials (Metric)
ASTM E8M REV B : EN-STANDARD TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS (METRIC)
ASTM E8M REV C : EN-STANDARD TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS (METRIC)
ASTM E9 : EN-STANDARD TEST METHODS OF COMPRESSION TESTING OF METALLIC MATERIALS AT ROOM TEMPERATURE
ASTM E9 REV A : EN-Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E90 : EN-Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions
ASTM E900 : EN-Standard Guide for Predicting Radiation-Induced Transition Shift in Vessel Materials E706 (IIF)
ASTM E901 : EN-Standard Classification System for Uranium Resources
ASTM E902 : EN-STANDARD PRACTICE FOR CHECKING THE OPERATING CHARACTERISTICS OF X-RAY PHOTOELECTRON SPECTROMETERS
ASTM E903 : EN-Standard Test Method for Solar Absorptance Reflectance and Transmittance of Materials Using Integrating Spheres
ASTM E904 : EN-Standard Practice for Generating All-Day Thermal Performance Data for Solar Collectors
ASTM E905 : EN-Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors
ASTM E906 : EN-Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products
ASTM E906 REV A : EN-Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products
ASTM E906 REV B : EN-Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products
ASTM E906/E906M : EN-Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
ASTM E907 : EN-STANDARD TEST METHOD FOR FIELD TESTING UPLIFT RESISTANCE OF ROOFING SYSTEMS EMPLOYING STEEL DECK RIGID INSULATION AND BITUMINOUS BUILT-UP ROOFING (R 1994)
ASTM E908 : EN-Standard Practice for Calibrating Gaseous Reference Leaks
ASTM E909 : EN-STANDARD MASTER MATRIX FOR DEVELOPMENT OF STANDARDS TO ASSIST IN SAFEGUARDING OF NUCLEAR MATERIALS
ASTM E910 : EN-Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance E 706 (IIIC)
ASTM E911 : EN-Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM E912 REV A : EN-STANDARD DEFINITIONS OF TERMS RELATING TO FATIGUE LOADING
ASTM E913 : EN-Standard Method for Calibration of Reference Pyranometers with Axis Vertical by the Shading Method
ASTM E914 : EN-STANDARD PRACTICE FOR EVALUATING TEMPERATURE SCALE FOR THERMOGRAVIMETRY (R 1993) (E1-1993)
ASTM E915 : EN-Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E916 : EN-Standard Guide for Reporting Employee Health History Information and Core Physical Examination Results
ASTM E917 : EN-STANDARD PRACTICE FOR MEASURING LIFE-CYCLE COSTS OF BUILDINGS AND BUILDING SYSTEMS
ASTM E918 : EN-Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
ASTM E919 : EN-Standard Specification for Software Documentation for a Computerized System
ASTM E92 : EN-Standard Test Method for Vickers Hardness of Metallic Materials
ASTM E920 : EN-Standard Specification for Commercially Packaged Laboratory Apparatus